What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 46 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 46 of 62

5120-12-359-6708
Auswechs Klemmteil

123596708
T623P3002110: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-325-8810
Blacksmiths' Tongs

123258810
47A-500: RNCC: 3 | RNVC: 2

17 Jul 1991

5120-12-123-5265
Box Wrench

121235265
111012231: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-336-0154
Mechanical Puller

123360154
3301001001: RNCC: 3 | RNVC: 2
3301001001: RNCC: 5 | RNVC: 2

12 Oct 1994

5120-12-386-1399
Hand Vise

123861399
71200000: RNCC: 3 | RNVC: 2
0920119: RNCC: 5 | RNVC: 2

10 Aug 2011

5120-12-123-5295

5120-12-153-7199
Socket Wrench Handle Bar

121537199
NM212-05: RNCC: 3 | RNVC: 2
5615890815/00: RNCC: 5 | RNVC: 2
561589081500: RNCC: 5 | RNVC: 2
NM212-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-121-1291
Hand Tube Bender

121211291
NO PRIMARY REF 12-121-1291: RNCC: 3 | RNVC: 2
3931001003: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-182-2096
Socket Wrench Crowfoot Attachment

121822096
540-17: RNCC: 3 | RNVC: 2

21 Jan 1980

5120-12-382-5094
Socket Wrench Crowfoot Attachment

123825094
440-15: RNCC: 3 | RNVC: 2
02190015: RNCC: 5 | RNVC: 2

30 Jun 2010

5120-12-174-0214
Socket Wrench Socket

121740214
C7800-22: RNCC: 3 | RNVC: 2
109690: RNCC: 5 | RNVC: 2

29 May 1978

5120-12-185-3140
Hand Hammer Head

121853140
DIN1041-300: RNCC: 2 | RNVC: 2
300DIN1041: RNCC: 5 | RNVC: 2

25 Sep 1980

5120-12-155-8273
Socket Wrench Socket Set

121558273
NO PRIMARY REF 12-155-8273: RNCC: 3 | RNVC: 2
6700SZ: RNCC: 5 | RNVC: 2
6700SZ: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1752
Sheet Metalworking Stake

121261752
631B166-40: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-176-7300
Ausdrueckvorrichtun

121767300
VG95211-ML-121767300: RNCC: 2 | RNVC: 2
105-41110W2: RNCC: 3 | RNVC: 2

15 Dec 1978

5120-12-369-0626
Socket Head Screw Key

123690626
200-113-51: RNCC: 3 | RNVC: 2
00.40.69.92: RNCC: 5 | RNVC: 2

17 May 2006

5120-12-183-9521
Face Spanner Wrench Socket

121839521
152735: RNCC: 3 | RNVC: 2
196617: RNCC: 5 | RNVC: 2
52-573-05: RNCC: 5 | RNVC: 2

3 Jun 1980

5120-12-127-1852
Box Wrench

121271852
DIN3111-50: RNCC: 2 | RNVC: 2
460-50: RNCC: 3 | RNVC: 2
2000-50: RNCC: 3 | RNVC: 2
308-50: RNCC: 3 | RNVC: 2
808-50: RNCC: 3 | RNVC: 2
50DIN3111: RNCC: 5 | RNVC: 2
00808005020: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-368-8059
Socket Wrench Socket

123688059
55-33: RNCC: 3 | RNVC: 2
771-S33: RNCC: 3 | RNVC: 2
05010033: RNCC: 5 | RNVC: 2
00.51.77.36: RNCC: 5 | RNVC: 2

24 Apr 2006

5120-12-371-2368
Claw Bar

123712368
A117.01-1000: RNCC: 3 | RNVC: 2
02.39.74.15: RNCC: 5 | RNVC: 2
0117011000: RNCC: 5 | RNVC: 2

5 Mar 2007

5120-12-130-9341
Socket Wrench Socket

121309341
NO PRIMARY REF 12-130-9341: RNCC: 3 | RNVC: 2
109578: RNCC: 5 | RNVC: 9
7420Z7-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-7261
Justier Stift

121297261
N13-13: RNCC: 3 | RNVC: 2
10302105: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-358-4055
Crimping Tool Die

123584055
974906: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-12-381-9529
Hand Hammer

123819529
5135030030: RNCC: 3 | RNVC: 2

21 Apr 2010

5120-12-391-0825
Driftpin

123910825
F6558527: RNCC: 3 | RNVC: 2

23 Jan 2013

5120-12-370-4108
Flat Tip And Cross Tip Screwdriver Set

123704108
96830179: RNCC: 3 | RNVC: 2

3 Nov 2006

5120-12-363-8718
Bearing And Bushing Inserter

123638718
T670P5001211: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-375-9614
Nietzugst Fuehrung

123759614
349302: RNCC: 3 | RNVC: 2

24 Jul 2008

5120-12-148-0360
Inspection Mirror

121480360
096M20208: RNCC: 3 | RNVC: 2
FE549: RNCC: 5 | RNVC: 2
FE549: RNCC: 5 | RNVC: 2
097M30100: RNCC: 5 | RNVC: 2
080M02100: RNCC: 5 | RNVC: 2
225148: RNCC: 5 | RNVC: 2
FE549: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-358-3631
Ratchet Wrench

123583631
71425116: RNCC: 3 | RNVC: 2

14 Oct 2002

5120-12-358-8685
Ratchet Wrench Set

123588685
96593418: RNCC: 3 | RNVC: 2

22 Nov 2002

5120-12-123-5109
Open End Wrench

121235109
NO PRIMARY REF 12-123-5109: RNCC: 3 | RNVC: 2
905014: RNCC: 5 | RNVC: 9
103181: RNCC: 5 | RNVC: 9
900M14X17: RNCC: 5 | RNVC: 9
C900M14X17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-320-6267
Mechanical Puller Attachment

123206267
1970-3: RNCC: 3 | RNVC: 2
5798760004: RNCC: 5 | RNVC: 2
74760003: RNCC: 5 | RNVC: 9
12722: RNCC: 5 | RNVC: 9

1 Feb 1990

5120-12-371-5220
Mater Saug- Griff

123715220
BO 602.2: RNCC: 3 | RNVC: 2
01.58.45.34: RNCC: 5 | RNVC: 2
602.2: RNCC: 5 | RNVC: 2

12 Apr 2007

5120-12-370-9050
Socket Wrench Screwdriver Attachment

123709050
6709F-4.5: RNCC: 3 | RNVC: 2
7314151830762: RNCC: 5 | RNVC: 2

15 Jan 2007

5120-12-376-0232
Torque Wrench

123760232
26180: RNCC: 3 | RNVC: 2
2851-2,0-8,0: RNCC: 5 | RNVC: 2

1 Aug 2008

5120-12-312-3057
Mechanical Puller Step Plate

123123057
142750-8: RNCC: 3 | RNVC: 2
80996060269: RNCC: 5 | RNVC: 2

15 Dec 1987

5120-12-124-8500
Ein- U Spannbuegel

121248500
35-10-01: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-343-6189
Swivel Knob Jeweler's Screwdriver

123436189
2125-0,40X2,5: RNCC: 3 | RNVC: 9

8 Jul 1997

5120-12-140-4975
Open End Wrench

121404975
3114-115: RNCC: 3 | RNVC: 2
3114-14: RNCC: 3 | RNVC: 2
612800-14: RNCC: 5 | RNVC: 2
790014177: RNCC: 5 | RNVC: 2
61280-14: RNCC: 5 | RNVC: 2
3114-115: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-319-9808
Rivet Bucking Bar

123199808
619: RNCC: 3 | RNVC: 2

24 Nov 1989

5120-12-070-0148

5120-12-386-0176
Bearing Staking Installation Tool

123860176
F6783567: RNCC: 3 | RNVC: 2

1 Aug 2011

5120-12-332-6356
Mechanical Puller

123326356
532113-9011.983: RNCC: 3 | RNVC: 2
532113-9011.983: RNCC: 5 | RNVC: 9

1 Sep 1993

5120-12-388-9795
Seal Inserter

123889795
80996040334: RNCC: 3 | RNVC: 2
80.99604-0334: RNCC: 5 | RNVC: 2

11 May 2012

5120-12-317-3147
Elektron Auszieher

123173147
4312 711 12230: RNCC: 3 | RNVC: 2
4900192-060000.00: RNCC: 5 | RNVC: 2
4900192-060000.00: RNCC: 5 | RNVC: 9

29 Mar 1989

5120-12-198-2236
Ku Montierwerkzeug

121982236
NO PRIMARY REF 12-198-2236: RNCC: 3 | RNVC: 2
440020: RNCC: 5 | RNVC: 9

2 Jan 1984

5120-12-307-8282
Bearing And Bushing Inserter

123078282
596-038: RNCC: 3 | RNVC: 2
F11.59661-0090: RNCC: 5 | RNVC: 2

30 Jul 1986

5120-12-354-9213
Retaining Ring Pliers

123549213
80996250073: RNCC: 3 | RNVC: 2
KL-0121-23: RNCC: 5 | RNVC: 2

5 Sep 2001

5120-12-187-6314
Spanner Wrench

121876314
NO PRIMARY REF 12-187-6314: RNCC: 3 | RNVC: 2
KN09.603: RNCC: 5 | RNVC: 9

21 Apr 1981

5120-12-324-1017
Mechanical Puller

123241017
038.112.1: RNCC: 3 | RNVC: 2
038.112.1-4: RNCC: 5 | RNVC: 2
790521277: RNCC: 5 | RNVC: 2

22 Jan 1991

5120-12-120-9682
Socket Wrench Crowfoot Attachment

121209682
NO PRIMARY REF 12-120-9682: RNCC: 3 | RNVC: 2
105673: RNCC: 5 | RNVC: 9
1951Z1-3-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-365-2919
Montierdorn

123652919
8095 798 051: RNCC: 3 | RNVC: 2

16 Dec 2004

5120-12-155-9515
Swivel Knob Jeweler's Screwdriver

121559515
NM173-01: RNCC: 3 | RNVC: 2
JD5120-12-155-9515: RNCC: 5 | RNVC: 2
NM173-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-131-4351
Ruecksto Auszieher

121314351
1005-9812: RNCC: 3 | RNVC: 2
1005-9812: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-194-0816
Torque Wrench Adapter

121940816
TL5120-0086-320: RNCC: 2 | RNVC: 2
180868: RNCC: 5 | RNVC: 9
7852-7-30: RNCC: 5 | RNVC: 9
20/DCA-30: RNCC: 5 | RNVC: 9
6264110009: RNCC: 5 | RNVC: 9
6450D-30: RNCC: 5 | RNVC: 9
F30029691: RNCC: 5 | RNVC: 9
58214030: RNCC: 5 | RNVC: 9
731-40SW30: RNCC: 5 | RNVC: 9
731/40 30: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-332-7938
Socket Head Screw Key

123327938
353-4,0X265: RNCC: 3 | RNVC: 2
000000-0094.229: RNCC: 5 | RNVC: 2

21 Sep 1993

5120-12-150-3940
H Haltevorrichtung

121503940
1X46106178: RNCC: 3 | RNVC: 2
V106178: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-197-5978
Tire Iron

121975978
11080-3: RNCC: 3 | RNVC: 2

7 Nov 1983

5120-12-307-1922
Mechanical Puller Adapter

123071922
320-997536-03: RNCC: 3 | RNVC: 2

21 May 1986

5120-12-317-9976
Socket Wrench

123179976
4.901-041.0: RNCC: 3 | RNVC: 2
7300017-20: RNCC: 5 | RNVC: 9
4.901-041: RNCC: 5 | RNVC: 9

2 Jun 1989

5120-12-186-7564
Box Wrench

121867564
420-12X13: RNCC: 3 | RNVC: 2
08441: RNCC: 5 | RNVC: 2

2 Feb 1981

5120-12-151-6562
Hand Rivet Set

121516562
1004-0100W1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-309-3514
Spanner Wrench

123093514
801-382: RNCC: 3 | RNVC: 2

19 Jan 1987

5120-12-335-9621
Mechanical Puller

123359621
0851 6835: RNCC: 3 | RNVC: 2
8516835: RNCC: 5 | RNVC: 2

6 Oct 1994

5120-12-304-9466
Box Wrench

123049466
84-1899: RNCC: 3 | RNVC: 2
84-1899: RNCC: 5 | RNVC: 9

10 Sep 1985

5120-12-304-9465
Mechanical Puller

123049465
6796941-203W32: RNCC: 3 | RNVC: 2

10 Sep 1985

5120-12-131-4946
Aufsteckschl Griff

121314946
NO PRIMARY REF 12-131-4946: RNCC: 3 | RNVC: 2
1945GRIFF: RNCC: 5 | RNVC: 9
1945U/3056: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-141-9660
Mechanical Puller Adapter

121419660
Y212-31: RNCC: 3 | RNVC: 2
512: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-171-1313
Lager

121711313
100227-93600.04: RNCC: 2 | RNVC: 2
9010-0573-00-04: RNCC: 3 | RNVC: 2
100227-93600.04: RNCC: 5 | RNVC: 9

9 Sep 1977

5120-12-180-5460
Fuehrungs- Buchse

121805460
3907-03008-000: RNCC: 3 | RNVC: 2
83.09144-0064: RNCC: 5 | RNVC: 2
83091440064: RNCC: 5 | RNVC: 2

17 Sep 1979

5120-12-380-6257
Box Wrench

123806257
0113113171000: RNCC: 3 | RNVC: 2
113A-1/4X5/16: RNCC: 5 | RNVC: 2

13 Nov 2009

5120-12-394-4096
Socket Wrench

123944096
3099-03-210000: RNCC: 3 | RNVC: 2

28 Nov 2013

5120-12-196-6861
Montierhuelse

121966861
4900059-751720.000.0: RNCC: 2 | RNVC: 2
4900059-751720.000.0: RNCC: 3 | RNVC: 2
4900059-751720.000.0: RNCC: 5 | RNVC: 2
4900059-751720-000-0: RNCC: 5 | RNVC: 2

2 Aug 1983

5120-12-180-9160
Keil

121809160
C106A44C192: RNCC: 3 | RNVC: 2
C106-A44-C192: RNCC: 5 | RNVC: 2
C106A44C192: RNCC: 5 | RNVC: 2

11 Oct 1979

5120-12-357-2061
Socket Wrench Adapter

123572061
DIN3122-CV10: RNCC: 2 | RNVC: 2
3094: RNCC: 3 | RNVC: 2

21 May 2002

5120-12-389-4310
Pike Pole

123894310
W23-2200806776/12: RNCC: 3 | RNVC: 2
5120-00700: RNCC: 6 | RNVC: 9

5 Jul 2012

5120-12-327-7352
Hand Terminal Crimping Tool

123277352
0999-000-0077: RNCC: 3 | RNVC: 2

25 Feb 1992

5120-12-321-2307
Socket Wrench Socket

123212307
62.6935.050.99-A002: RNCC: 3 | RNVC: 2
792367: RNCC: 5 | RNVC: 2

20 Apr 1990

5120-12-355-3947
Abzieh- Und Aufdrue

123553947
5555199: RNCC: 3 | RNVC: 2

9 Nov 2001

5120-12-351-5258
Pliers

123515258
1301160: RNCC: 3 | RNVC: 2

1 Aug 2000

5120-12-376-1831
Spanner Wrench Set

123761831
703.009562: RNCC: 3 | RNVC: 2

21 Aug 2008

5120-12-364-3479
Pliers

123643479
65305200-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-363-8360
Bearing And Bushing Inserter And Remover

123638360
T671P5001109: RNCC: 3 | RNVC: 2

29 Jul 2004

5120-12-363-4251
Brad Awl

123634251
61323092: RNCC: 3 | RNVC: 2

10 Jun 2004

5120-12-356-8574
Torque Wrench

123568574
52.3218.043.04: RNCC: 3 | RNVC: 2

11 Apr 2002

5120-12-194-6747

5120-12-130-3387

5120-12-151-8401
Lamp Extractor

121518401
LA153Z2: RNCC: 3 | RNVC: 2
586-3081: RNCC: 5 | RNVC: 2
586-3081: RNCC: 5 | RNVC: 2
586-3081: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-4682
Electronic Equipment Alignment Tool

121264682
NO PRIMARY REF 12-126-4682: RNCC: 3 | RNVC: 2
173835: RNCC: 5 | RNVC: 9
108692: RNCC: 5 | RNVC: 9
5510: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-309-6573
Schluessel

123096573
335927-9039.000: RNCC: 3 | RNVC: 2
6264.10-13: RNCC: 5 | RNVC: 2
335927-9039-000: RNCC: 5 | RNVC: 9
33 59 27-9039.000: RNCC: 5 | RNVC: 9
335927-9039.000: RNCC: 5 | RNVC: 9

13 Feb 1987

5120-12-126-1590
Pliers

121261590
573D010-250: RNCC: 3 | RNVC: 2
250DIN5247: RNCC: 5 | RNVC: 9
DIN5247-250: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-7304
Ausdrueckvorrichtun

121767304
VG95211-ML-121767304: RNCC: 2 | RNVC: 2
1121-10151W3: RNCC: 3 | RNVC: 2
105-10151W3: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-141-9643
Socket Head Screw Key

121419643
571F002BL7-32IN: RNCC: 3 | RNVC: 2
1997L-Z7/32: RNCC: 3 | RNVC: 2
1059101: RNCC: 5 | RNVC: 2
6308L7-32IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-324-9964
Combination Box And Open End Wrench Set

123249964
600NA/10: RNCC: 3 | RNVC: 2
4415300008: RNCC: 5 | RNVC: 9
600A/10: RNCC: 5 | RNVC: 9

22 Apr 1991

5120-12-306-0071
Drain Plug Wrench

123060071
NO PRIMARY REF 12-306-0071: RNCC: 3 | RNVC: 2
3667: RNCC: 5 | RNVC: 9
5714640005: RNCC: 5 | RNVC: 9

20 Jan 1986

5120-12-328-4268
Bearing And Bushing Inserter And Remover

123284268
550589014300: RNCC: 3 | RNVC: 2
5505890143-00: RNCC: 5 | RNVC: 2
5505890143/00: RNCC: 5 | RNVC: 2

16 May 1992

5120-12-350-2564
Hand Vise

123502564
723/120: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-146-0591
Eindrueck- Huelse

121460591
23114-7101-08: RNCC: 2 | RNVC: 2
510159: RNCC: 3 | RNVC: 2
510159: RNCC: 5 | RNVC: 9
510159: RNCC: 5 | RNVC: 9
23114-7101-08: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-3632
Schraub Absprenger

121773632
172499: RNCC: 3 | RNVC: 9
4610-1: RNCC: 3 | RNVC: 9
961: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-172-3935
Abziehvorrichtung

121723935
VG95211-ML-121723935: RNCC: 2 | RNVC: 2
30-79350-6106: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-12-316-3077
Socket Head Screw Key Blade

123163077
9925BP: RNCC: 3 | RNVC: 2
42520600: RNCC: 3 | RNVC: 9
99-25BP: RNCC: 5 | RNVC: 9

9 Jan 1989

5120-12-330-1901
Hand Cartridge Removing Hook

123301901
4900255-200000-01-00: RNCC: 2 | RNVC: 2
4900255-200000-01-00: RNCC: 3 | RNVC: 9

12 Nov 1992

5120-12-133-3662
Piston Ring Expander

121333662
860-181: RNCC: 3 | RNVC: 2
BM14673E: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-147-5923
Schluessel

121475923
2895-036: RNCC: 3 | RNVC: 2
2895036: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-345-8323
Ratchet Wrench

123458323
150610: RNCC: 3 | RNVC: 2

4 May 1998

5120-12-127-2136

5120-12-311-2413
Plier Wrench

123112413
500/6: RNCC: 3 | RNVC: 2
5880008: RNCC: 3 | RNVC: 2

7 Aug 1987

5120-12-311-0625
Seal Inserter

123110625
363589051500: RNCC: 3 | RNVC: 2

22 Jul 1987

5120-12-357-7163
Werkst Druckstueck

123577163
225208-M: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-388-5841
Flat Tip Screwdriver

123885841
00704: RNCC: 3 | RNVC: 2
302-6,5X100: RNCC: 5 | RNVC: 2

3 Apr 2012

5120-12-173-4210
Hand Screw Starter

121734210
1900TRS: RNCC: 3 | RNVC: 2
8067-3-5X80: RNCC: 3 | RNVC: 9
131817: RNCC: 5 | RNVC: 2
C5719295N: RNCC: 5 | RNVC: 2

13 Apr 1978

5120-12-126-2608
Quick Adjusting Screw Clamp

121262608
TG30T20: RNCC: 3 | RNVC: 2
D30-20: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-153-2243
Hahnschluessel

121532243
CH277-18: RNCC: 3 | RNVC: 2
1205 1856: RNCC: 3 | RNVC: 2
12051856: RNCC: 5 | RNVC: 2
3.415.0.018.030.4: RNCC: 5 | RNVC: 2
CH277-18: RNCC: 5 | RNVC: 9
26-50-61-4: RNCC: 5 | RNVC: 9
3-415-0-018-030-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-344-0395
Sc Montierwerkzeug

123440395
03-991-00900: RNCC: 3 | RNVC: 2

2 Sep 1997

5120-12-341-5809
Pa Montierwerkzeug

123415809
344720: RNCC: 3 | RNVC: 2
94095-123 W 10: RNCC: 5 | RNVC: 2

25 Sep 1996

5120-12-146-9043
Spanner Wrench

121469043
2360-261169.00.0: RNCC: 2 | RNVC: 2
2360-261169.00.0: RNCC: 3 | RNVC: 2
2360-261169-00-0: RNCC: 5 | RNVC: 2
2360-261169-00-0: RNCC: 5 | RNVC: 2
2360-261169.00.0: RNCC: 5 | RNVC: 2
600304: RNCC: 5 | RNVC: 2
2360-261169-00-0: RNCC: 5 | RNVC: 9
2360-261169.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-157-6779
Kabelschuh Stempel

121576779
N185-240WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-700-6197
Socket Wrench Set

127006197
425817: RNCC: 3 | RNVC: 2
KOMBINATIONSHANDWERKZ. F. FEUERW: RNCC: 5 | RNVC: 9

29 Sep 1992

5120-12-165-5699
Gasoline Field Range Outfit Burner Slot Cleaner

1 Jun 1976

5120-12-335-0784
Montierhuelse

123350784
F6276891: RNCC: 3 | RNVC: 2

20 Jul 1994

5120-12-173-4638
Spanner Wrench

121734638
009-017-440-003W2: RNCC: 3 | RNVC: 2

18 Apr 1978

5120-12-367-5824
Mechanical Puller

123675824
S50255-0000: RNCC: 3 | RNVC: 2

7 Sep 2005

5120-12-133-3966
Screwdriver Bit

121333966
NO PRIMARY REF 12-133-3966: RNCC: 3 | RNVC: 2
6988M9: RNCC: 5 | RNVC: 9
109051: RNCC: 5 | RNVC: 9
6988M8X1-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-346-2250
Terminal Crimping Tool Contact Positioner

123462250
VG95236T27A0005: RNCC: 2 | RNVC: 2
SN1767-K-100: RNCC: 3 | RNVC: 2
SN1767-K-100: RNCC: 5 | RNVC: 9

30 Jun 1998

5120-12-133-3837
Socket Wrench Socket

121333837
870T5-16: RNCC: 3 | RNVC: 2
A7402DZ-5/16: RNCC: 3 | RNVC: 2
176001: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-321-6666
Spanner Wrench

123216666
218-375: RNCC: 3 | RNVC: 2

13 Jun 1990

5120-12-369-1213
Box Wrench

123691213
112-14X15: RNCC: 3 | RNVC: 2
00.27.24.08: RNCC: 5 | RNVC: 2

24 May 2006

5120-12-131-4931
Socket Wrench

121314931
NO PRIMARY REF 12-131-4931: RNCC: 3 | RNVC: 2
129816: RNCC: 5 | RNVC: 9
1945UZ1-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-179-7500
Trowel

121797500
DIN6441-D10: RNCC: 2 | RNVC: 2
106-10: RNCC: 3 | RNVC: 9
D10DIN6441: RNCC: 5 | RNVC: 9
5482-10: RNCC: 5 | RNVC: 9
8825-10: RNCC: 5 | RNVC: 9
66010-10: RNCC: 5 | RNVC: 9
2001-10: RNCC: 5 | RNVC: 9

25 Jul 1979

5120-12-353-3261
Schluessel

123533261
5615890416/00: RNCC: 3 | RNVC: 2
561589041600: RNCC: 5 | RNVC: 2

8 Mar 2001

5120-12-303-4726
Rohrbieger Hebel

123034726
BAV 6/12 HEBEL: RNCC: 3 | RNVC: 2

26 Mar 1985

5120-12-346-7825
Seal Inserter

123467825
80996040173: RNCC: 3 | RNVC: 2

10 Sep 1998

5120-12-346-6811
Dreh Haltewerkzeug

123466811
41121-T603: RNCC: 3 | RNVC: 2

25 Aug 1998

5120-12-357-7724
Pliers

123577724
265/1: RNCC: 3 | RNVC: 2

22 Jul 2002

5120-12-153-2082
Socket Head Screw Key

121532082
CH279/5NM: RNCC: 3 | RNVC: 2
1201 9490: RNCC: 5 | RNVC: 2
12019490: RNCC: 5 | RNVC: 9
CH279/5NM: RNCC: 5 | RNVC: 9
A26.50-55: RNCC: 5 | RNVC: 9
A26-50-55: RNCC: 5 | RNVC: 9
CH279-5NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-144-3324
Open End Wrench

121443324
66230074: RNCC: 3 | RNVC: 2
0255394: RNCC: 5 | RNVC: 2
652E-138: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-164-8998
Verlaengerung

121648998
23305-264100.05.0: RNCC: 2 | RNVC: 2
23305-264100.05.0: RNCC: 3 | RNVC: 2
23305-264100-05-0: RNCC: 5 | RNVC: 9
23305-264100.05.0: RNCC: 5 | RNVC: 9
23305-264100-05-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-301-0306
Bedienteil Hebel

123010306
1423-200.93(4): RNCC: 3 | RNVC: 2

19 Sep 1984

5120-12-352-1250
Mechanical Puller

123521250
2300223-264140.00.0: RNCC: 2 | RNVC: 2
2300223-264140.00.0: RNCC: 3 | RNVC: 2

18 Oct 2000

5120-12-168-6382

5120-12-173-1733
Stab

121731733
VG95211-ML-121731733: RNCC: 2 | RNVC: 2
1X56 136 910: RNCC: 3 | RNVC: 2
1X56136910: RNCC: 5 | RNVC: 9

22 Mar 1978

5120-12-152-7786
Zuendver Auszieher

121527786
510070-20751: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-389-4478
Spanner Wrench

123894478
F6271439: RNCC: 3 | RNVC: 2

9 Jul 2012

5120-12-330-9351
Screwdriver Bit

123309351
NO PRIMARY REF 12-330-9351: RNCC: 3 | RNVC: 2
15JP-9: RNCC: 5 | RNVC: 9

1 Mar 1993

5120-12-120-8728
Pipe Vise

121208728
11053: RNCC: 3 | RNVC: 2
2265-3: RNCC: 5 | RNVC: 2
634A102-3: RNCC: 5 | RNVC: 9
11053: RNCC: 5 | RNVC: 9
PI0NIER3KLADI: RNCC: 5 | RNVC: 9
5120-45072: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-163-6650
Greifwerkzeug

121636650
26-21C1442P010: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5584
Schluesseleinsatzsa

121235584
NO PRIMARY REF 12-123-5584: RNCC: 3 | RNVC: 2
157554: RNCC: 5 | RNVC: 9
4115-1-8: RNCC: 5 | RNVC: 9
4115-1E: RNCC: 5 | RNVC: 9
4115Z1E: RNCC: 5 | RNVC: 9
107875: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-3326
Hand Hammer

121263326
DIN6491-B500S: RNCC: 2 | RNVC: 2
5062-500: RNCC: 3 | RNVC: 2
51202052: RNCC: 5 | RNVC: 2
B500SDIN6491: RNCC: 5 | RNVC: 2
4-128562: RNCC: 5 | RNVC: 2
51202-52: RNCC: 5 | RNVC: 9
1393118112234602: RNCC: 5 | RNVC: 9
0808393076989: RNCC: 5 | RNVC: 9
TGL 48-71126,250,OB 602: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-374-9542
Socket Wrench Set

123749542
1405BL: RNCC: 3 | RNVC: 2

9 Apr 2008

5120-12-193-4445
Torque Wrench

121934445
NO PRIMARY REF 12-193-4445: RNCC: 3 | RNVC: 2
9291380271: RNCC: 5 | RNVC: 2
4507: RNCC: 5 | RNVC: 9

21 Jul 1982

5120-12-339-9703
Eindrueckwerkzeug

123399703
5078409: RNCC: 3 | RNVC: 2
698-460-0031: RNCC: 5 | RNVC: 2

7 Feb 1996

5120-12-198-5323
Handling Tool Arm

121985323
2300109-990971.000.0: RNCC: 2 | RNVC: 2
2300109-990971.000.0: RNCC: 3 | RNVC: 2
2300109-990971.000.0: RNCC: 3 | RNVC: 2
2300109-990971.000.0: RNCC: 5 | RNVC: 2

7 Feb 1984

5120-12-329-2149
Mechanical Puller

123292149
M-PLH-423000-10239: RNCC: 3 | RNVC: 2
M-PLH-423000-10239: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-12-134-9296
Mansch Gewindedorn

121349296
26-50-21-4: RNCC: 3 | RNVC: 2
26-50-21-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-315-6791
Mechanical Puller

123156791
VV1341-83: RNCC: 3 | RNVC: 2

19 Nov 1988

5120-12-326-0185
Mechanical Puller Attachment

123260185
460589033400: RNCC: 3 | RNVC: 2
63-434: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-313-8078
C Clamp

123138078
932-301-806: RNCC: 3 | RNVC: 2

7 May 1988

5120-12-306-8483
Bearing And Bushing Inserter

123068483
8208641: RNCC: 3 | RNVC: 2
8470353: RNCC: 5 | RNVC: 2
4-8208-641: RNCC: 5 | RNVC: 2

10 Apr 1986

5120-12-172-6206
Socket Wrench Crowfoot Attachment

121726206
30-79350-5092: RNCC: 3 | RNVC: 2

31 Jan 1978

5120-12-331-7187
Socket Wrench

123317187
480-7345-14-00-00-5,7,8: RNCC: 3 | RNVC: 2

15 Jun 1993

5120-12-363-0088
Socket Wrench Socket

123630088
456A-13/16: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-12-327-8727
Elektron Auszieher

123278727
MIC03: RNCC: 3 | RNVC: 2

14 Mar 1992

5120-12-146-5145

5120-12-301-5318
Pliers

123015318
2803200: RNCC: 3 | RNVC: 2
2801200: RNCC: 5 | RNVC: 2
168451: RNCC: 5 | RNVC: 9
2455A: RNCC: 5 | RNVC: 9

20 Oct 1984

5120-12-199-5565
Screw Thread Insert Inserter

121995565
SRM 1415W: RNCC: 3 | RNVC: 2
SRM 1415W: RNCC: 5 | RNVC: 9

11 May 1984

5120-12-126-5436
Schluessel

121265436
4015890109: RNCC: 3 | RNVC: 2
4015890109: RNCC: 3 | RNVC: 9
401589010900: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-332-9806
Bearing And Bushing Inserter

123329806
312589171500: RNCC: 3 | RNVC: 2

18 Oct 1993

5120-12-382-7560
Screwdriver Bit

123827560
05059775001: RNCC: 3 | RNVC: 2
851/4Z-PH2X89: RNCC: 5 | RNVC: 2
851/4ZPH2X89: RNCC: 5 | RNVC: 9

5 Aug 2010

5120-12-182-5577
Abziehvorrichtung

121825577
3906-43000-000: RNCC: 3 | RNVC: 9
WU95: RNCC: 5 | RNVC: 9

11 Feb 1980

5120-12-177-2190
Socket Wrench Socket

121772190
NO PRIMARY REF 12-177-2190: RNCC: 3 | RNVC: 2
01720098: RNCC: 5 | RNVC: 9
40EL1BA: RNCC: 5 | RNVC: 9

19 Jan 1979

5120-12-382-0301
Socket Wrench

123820301
80996030364: RNCC: 3 | RNVC: 2
80.99603-0364: RNCC: 5 | RNVC: 2

29 Apr 2010

5120-12-145-6397
Torque Wrench

121456397
8571-01: RNCC: 3 | RNVC: 2
K756WD52-100VR: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-9911
Retaining Ring Pliers

123649911
3-761-10: RNCC: 3 | RNVC: 2

20 Nov 2004

5120-12-365-0110
Swivel Knob Jeweler's Screwdriver

123650110
6-684: RNCC: 3 | RNVC: 2

23 Nov 2004

5120-12-328-0499
Socket Wrench Screwdriver Attachment

123280499
VDEIN19-5: RNCC: 3 | RNVC: 2
VDE IN 19-5: RNCC: 5 | RNVC: 2

2 Apr 1992

5120-12-319-8924
Cross Tip Screwdriver Set

123198924
66840-1+66840-2+66840-3: RNCC: 3 | RNVC: 2
250A-02-0200: RNCC: 5 | RNVC: 2
250A-02-0200: RNCC: 5 | RNVC: 9

14 Nov 1989

5120-12-321-1085
Face Spanner Wrench Socket

123211085
F30277507: RNCC: 3 | RNVC: 2
F362670277507: RNCC: 5 | RNVC: 9

28 Mar 1990

5120-12-324-4982
Seal Remover

123244982
5.901-003.0: RNCC: 3 | RNVC: 2
5.901-003: RNCC: 5 | RNVC: 9

22 Feb 1991

5120-12-357-7544
Ru Montierwerkzeug

123577544
RD99-00-015100: RNCC: 3 | RNVC: 2

19 Jul 2002

5120-12-171-5363
Okular Zange

121715363
1238-1100W17: RNCC: 3 | RNVC: 2
1238-1100W17: RNCC: 5 | RNVC: 2
1238-1100W17: RNCC: 5 | RNVC: 9

21 Oct 1977

5120-12-173-4219
Socket Wrench

121734219
DIN896-A20X22: RNCC: 2 | RNVC: 2
620500-20X22: RNCC: 3 | RNVC: 2
62050-20X22: RNCC: 5 | RNVC: 9
A20X22DIN896: RNCC: 5 | RNVC: 9

13 Apr 1978

5120-12-318-7599
Joint Breaking Wedge

123187599
619-45.10.312-05: RNCC: 3 | RNVC: 2

15 Aug 1989

5120-12-376-2151
Drive Pin Punch

123762151
JDAL8-200-TCS: RNCC: 3 | RNVC: 2

26 Aug 2008

5120-12-192-5980
Einpreszwerkzeug

121925980
2300109-990980.000.0: RNCC: 2 | RNVC: 2
2300109-990980.000.0: RNCC: 3 | RNVC: 2
2300109-990980.000.0: RNCC: 3 | RNVC: 2
2300109-990980.000.0: RNCC: 5 | RNVC: 2

6 May 1982

5120-12-342-0754
Socket Wrench Extension

123420754
DIN7434-12,5X250: RNCC: 2 | RNVC: 2
133325: RNCC: 3 | RNVC: 2
9845-250: RNCC: 3 | RNVC: 2

6 Dec 1996

5120-12-381-1590
Open End Wrench

123811590
6.815-226.0: RNCC: 3 | RNVC: 2

15 Jan 2010

5120-12-327-9108
Socket Wrench Socket

123279108
A6800DZ-11/32: RNCC: 3 | RNVC: 2
40ADL-11/32: RNCC: 3 | RNVC: 2
180387: RNCC: 5 | RNVC: 2
01 64 00 22: RNCC: 5 | RNVC: 2

19 Mar 1992

5120-12-127-0428
Socket Wrench Socket

121270428
DG30-15: RNCC: 3 | RNVC: 2
47-15: RNCC: 3 | RNVC: 2
02040015: RNCC: 5 | RNVC: 2
7410DM15: RNCC: 5 | RNVC: 9
109513: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-121-5372
Hand Rivet Set

121215372
NO PRIMARY REF 12-121-5372: RNCC: 3 | RNVC: 2
244E16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-0182
Flat Tip Screwdriver

121550182
8060VDE-1X6X150: RNCC: 3 | RNVC: 2
5M8936-220-66: RNCC: 5 | RNVC: 2
1691882: RNCC: 5 | RNVC: 2
5M.8936.220.66: RNCC: 5 | RNVC: 2
8060N1X6X150: RNCC: 5 | RNVC: 9
155-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-1629
Hauptfahrw Adapter

121531629
282-703-150-010: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-312-1051
Socket Wrench Handle

123121051
770-L10B: RNCC: 3 | RNVC: 2
504-18: RNCC: 3 | RNVC: 2
TVA5120-2-263-033: RNCC: 5 | RNVC: 1
00.50.79.35: RNCC: 5 | RNVC: 2
13060013: RNCC: 5 | RNVC: 2
TVA5120-2-263-033/1.1.23: RNCC: 5 | RNVC: 2
504-18IN: RNCC: 5 | RNVC: 9
504/18": RNCC: 5 | RNVC: 9

20 Nov 1987

5120-12-367-1975
Socket Wrench Socket

123671975
DIN3124-11X12,5L: RNCC: 2 | RNVC: 2
0712132111: RNCC: 3 | RNVC: 2

19 Jul 2005

5120-12-318-0312
Socket Wrench Adapter

123180312
2304: RNCC: 3 | RNVC: 2
2304: RNCC: 5 | RNVC: 9

6 Jun 1989

5120-12-381-9235
Adjustable Wrench

123819235
0483000C: RNCC: 3 | RNVC: 2

19 Apr 2010

5120-12-390-1303
Mecha Ejector Tool

123901303
437589023300: RNCC: 3 | RNVC: 2

9 Oct 2012

5120-12-022-0335

5120-12-385-2886
Hand Shovel

123852886
48.000.005: RNCC: 3 | RNVC: 2

18 May 2011

5120-12-343-3848
L Einstellwerkzeug

123433848
437589002300: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-365-0505
Box Wrench

123650505
0058111424: RNCC: 3 | RNVC: 2
000895017001: RNCC: 5 | RNVC: 9

24 Nov 2004

5120-12-381-9590
Hous Mounting Tool

123819590
BN 3148: RNCC: 3 | RNVC: 2
DSB 01104020: RNCC: 5 | RNVC: 2

21 Apr 2010

5120-12-381-9081
Plier Wrench

123819081
65612175: RNCC: 3 | RNVC: 2
4018754038091: RNCC: 5 | RNVC: 2
6561: RNCC: 5 | RNVC: 2

16 Apr 2010

5120-12-383-6942
Mechanical Puller

123836942
1X56.095.084: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-12-021-7947

5120-12-023-1425

5120-12-175-3468
Schluessel

121753468
1400003-13043-00: RNCC: 3 | RNVC: 2

11 Sep 1978

5120-12-323-3167
Hand Shovel

123233167
TK5120-008: RNCC: 2 | RNVC: 2
3505.000: RNCC: 3 | RNVC: 2
TK-BA24-5120-059: RNCC: 5 | RNVC: 9
TK-BA54-5120-059: RNCC: 5 | RNVC: 9
5120-11270: RNCC: 6 | RNVC: 9

13 Nov 1990

5120-12-336-9798
Socket Wrench Adapter

123369798
05072905001: RNCC: 3 | RNVC: 2
52955-020: RNCC: 3 | RNVC: 2
072905: RNCC: 3 | RNVC: 9
2170S: RNCC: 5 | RNVC: 2
72905: RNCC: 5 | RNVC: 9

4 Jan 1995

5120-12-332-3794
Spanner Wrench

123323794
523510-8016.902: RNCC: 3 | RNVC: 2
523510-8016 902: RNCC: 5 | RNVC: 2
523510-8016.902: RNCC: 5 | RNVC: 2

4 Aug 1993

5120-12-172-0923
Electrical Contact Remover

121720923
54174299: RNCC: 3 | RNVC: 2
54702399: RNCC: 3 | RNVC: 2
FLIP-DIP14/16: RNCC: 5 | RNVC: 2
FLIP-DIP14/1654174299: RNCC: 5 | RNVC: 2
102-14-16PIN: RNCC: 5 | RNVC: 9
154075: RNCC: 5 | RNVC: 9

19 Dec 1977

5120-12-161-4416
Lamp Extractor

121614416
JD5120-12-161-4416: RNCC: 3 | RNVC: 2
1.90900.002 UND 1.90900.003: RNCC: 3 | RNVC: 2
0399418: RNCC: 5 | RNVC: 2
063599002: RNCC: 5 | RNVC: 2
5L8938-301-54: RNCC: 5 | RNVC: 2
5.05800.012: RNCC: 5 | RNVC: 2
1711410902: RNCC: 5 | RNVC: 2
5-05800-012: RNCC: 5 | RNVC: 9
17114 10902: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-191-7524
Torque Wrench

121917524
NO PRIMARY REF 12-191-7524: RNCC: 3 | RNVC: 2
000589272100: RNCC: 5 | RNVC: 2
000589272100: RNCC: 5 | RNVC: 2
72NM/6: RNCC: 5 | RNVC: 9

1 Mar 1982

5120-12-187-6878
Bearing And Bushing Inserter

121876878
NO PRIMARY REF 12-187-6878: RNCC: 3 | RNVC: 2
KN09.601: RNCC: 5 | RNVC: 9

27 Apr 1981

5120-12-331-5841
Socket Wrench

123315841
428LG-8: RNCC: 3 | RNVC: 2
1932110029: RNCC: 5 | RNVC: 2

25 May 1993

5120-12-362-4588
Combination Box And Open End Wrench

123624588
54.0084.960.43: RNCC: 3 | RNVC: 2
13-9: RNCC: 5 | RNVC: 2

26 Feb 2004

5120-12-150-3920
Getrieb Druckstueck

121503920
1X46908291: RNCC: 3 | RNVC: 2
V90829-1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-389-3904
Socket Head Screw Key Set

123893904
627610-4: RNCC: 3 | RNVC: 2

29 Jun 2012

5120-12-304-0839
Spanner Wrench

123040839
009-030.140-003W3: RNCC: 3 | RNVC: 2
12790-120000.003: RNCC: 5 | RNVC: 2
009-039.140-003W3: RNCC: 5 | RNVC: 9

10 Jun 1985

5120-12-190-9722
Abdrueckvorrichtung

121909722
2169-9970-000: RNCC: 3 | RNVC: 2
2169-9970-000: RNCC: 5 | RNVC: 2
2169-9970-000: RNCC: 5 | RNVC: 9

29 Dec 1981

5120-12-338-2539
Mechanical Puller

123382539
66-92-016-6: RNCC: 3 | RNVC: 2

12 Jun 1995

5120-12-132-4295
Schluessel

121324295
1216 7823: RNCC: 3 | RNVC: 2
12167823: RNCC: 5 | RNVC: 9
6-420-0-690-001-5: RNCC: 5 | RNVC: 9
6.420.0.690.001.5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-313-5358
Mechanical Puller

123135358
4507-25120.00: RNCC: 3 | RNVC: 2

13 Apr 1988

5120-12-123-5056
Open End Wrench

121235056
200-14X15: RNCC: 3 | RNVC: 2
620-14X15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-362-5178
Hand Hammer

123625178
54.0084.960.79: RNCC: 3 | RNVC: 2
481-300: RNCC: 5 | RNVC: 2

4 Mar 2004

5120-12-309-8981
Mechanical Puller Adapter

123098981
507589002503: RNCC: 3 | RNVC: 2
507589002503: RNCC: 5 | RNVC: 2
507589002503: RNCC: 5 | RNVC: 2
5075890025/03: RNCC: 5 | RNVC: 2

16 Mar 1987

5120-12-178-3290
Open End Wrench

121783290
NO PRIMARY REF 12-178-3290: RNCC: 3 | RNVC: 2
40768989: RNCC: 5 | RNVC: 9
12E10BA: RNCC: 5 | RNVC: 9

12 Apr 1979

5120-12-371-7282
Spanner Wrench

123717282
437589000700: RNCC: 3 | RNVC: 2

9 May 2007

5120-12-381-1143
Fixed Open End Wrench Set

123811143
4375800403: RNCC: 3 | RNVC: 2

12 Jan 2010

5120-12-332-6134
Spanner Wrench

123326134
532113-8196.903: RNCC: 3 | RNVC: 2
532113-8196.903: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-364-3127
Socket Wrench Socket

123643127
01030007-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-379-0859
Hand Hammer

123790859
616600: RNCC: 3 | RNVC: 2
28497: RNCC: 5 | RNVC: 2
391319122400: RNCC: 6 | RNVC: 9

22 Jun 2009

5120-12-189-0786
Spanner Wrench

121890786
C-WZE: RNCC: 3 | RNVC: 2
C-WZE: RNCC: 5 | RNVC: 9

25 Aug 1981

5120-12-334-9619
K Einstellwerkzeug

123349619
748.117.6: RNCC: 3 | RNVC: 2

6 Jul 1994

5120-12-346-0801
Hand Tube Flaring Tool

123460801
150130: RNCC: 3 | RNVC: 2

8 Jun 1998

5120-12-307-0464
Mechanical Puller Attachment

123070464
4900059-752005.000.0: RNCC: 2 | RNVC: 2
4900059-752005.000.0: RNCC: 3 | RNVC: 2

30 Apr 1986

5120-12-337-5481
Mechanical Puller

123375481
62985000: RNCC: 3 | RNVC: 2

10 Mar 1995

5120-12-363-9705
Bearing And Bushing Inserter

123639705
T671P5002247: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-390-2459
Torque Wrench Adapter

123902459
R809291: RNCC: 3 | RNVC: 2

22 Oct 2012

5120-12-382-6035
Mecha Ejector Tool

123826035
41285177: RNCC: 3 | RNVC: 2

15 Jul 2010

5120-12-171-2139
Winkel

121712139
81.66850-0001: RNCC: 3 | RNVC: 2
81668500001: RNCC: 3 | RNVC: 2

19 Sep 1977

5120-12-385-9906
Torque Screwdriver

123859906
659910-500: RNCC: 3 | RNVC: 2
08.06510-9026: RNCC: 5 | RNVC: 2
08065109026: RNCC: 5 | RNVC: 2

28 Jul 2011

5120-12-371-3904
Socket Head Screw Key

123713904
54967: RNCC: 3 | RNVC: 2
5496-T40: RNCC: 5 | RNVC: 2
4001002549678: RNCC: 5 | RNVC: 2

22 Mar 2007

5120-12-198-3650
Torque Wrench Set

121983650
NO PRIMARY REF 12-198-3650: RNCC: 3 | RNVC: 2
8562-30: RNCC: 5 | RNVC: 9

23 Jan 1984

5120-12-132-1090

5120-12-093-7602

5120-12-127-1848
Socket Wrench

121271848
FZ432: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-320-1053
Lager- Und Einsatz

123201053
99366642: RNCC: 3 | RNVC: 2

7 Dec 1989

5120-12-382-0326
Socket Head Screw Key Set

123820326
151.2280: RNCC: 3 | RNVC: 2

29 Apr 2010

5120-12-132-2722

5120-12-365-9149
Swivel Knob Jeweler's Screwdriver

123659149
T4880X 08: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-312-1050
Socket Wrench Handle

123121050
DIN3122-D25: RNCC: 2 | RNVC: 2
2193U-3: RNCC: 3 | RNVC: 2
TVA5120-2-263-033: RNCC: 5 | RNVC: 1
D25DIN3122: RNCC: 5 | RNVC: 2
TVA5120-2-263-033/1.1.18: RNCC: 5 | RNVC: 2

20 Nov 1987

5120-12-337-4796
Open End Wrench

123374796
2187-09492-00: RNCC: 3 | RNVC: 2

9 Mar 1995

5120-12-379-7258
Box Wrench

123797258
609-E20XE24: RNCC: 3 | RNVC: 2
21TX-E20XE24: RNCC: 3 | RNVC: 2
41252024: RNCC: 5 | RNVC: 2
4000896024698: RNCC: 5 | RNVC: 2

26 Aug 2009

5120-12-340-4750
Open End Wrench

123404750
DIN133-95: RNCC: 2 | RNVC: 2
133-95: RNCC: 3 | RNVC: 2
TA1034004: RNCC: 5 | RNVC: 2

19 Apr 1996

5120-12-171-3155
Stempel

121713155
105-31781W3.03: RNCC: 3 | RNVC: 2
105-31781W3-03: RNCC: 5 | RNVC: 2

29 Sep 1977

5120-12-193-6661
Werkzeugausstattung

121936661
C74451-Z1073-U56: RNCC: 3 | RNVC: 2

18 Aug 1982

5120-12-181-5761
Mechanical Puller

121815761
2500096-383700.00.0: RNCC: 2 | RNVC: 2
2500096-383700.00.0: RNCC: 3 | RNVC: 2
2500096-383700.00.0: RNCC: 5 | RNVC: 2
2500096-383700-00-0: RNCC: 5 | RNVC: 9
2500096-383700-00-0: RNCC: 5 | RNVC: 9

3 Dec 1979

5120-12-342-1900
Drive Pin Punch

123421900
1300835-000-03: RNCC: 2 | RNVC: 2
1300835-000-03: RNCC: 3 | RNVC: 2

24 Dec 1996

5120-12-340-2670
Laeppwer Laeppkopf

123402670
652-20: RNCC: 3 | RNVC: 2

20 Mar 1996

5120-12-141-2965
Open End Wrench

121412965
NO PRIMARY REF 12-141-2965: RNCC: 3 | RNVC: 2
1931NZ13-32X15-32IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-322-0092
Torque Wrench

123220092
730AR/46: RNCC: 3 | RNVC: 2
730A/46+735/40: RNCC: 5 | RNVC: 2
91381136+58250040: RNCC: 5 | RNVC: 2

17 Jul 1990

5120-12-184-0723
Magnetic Retrieving Tool

121840723
TL5120-0131-003: RNCC: 2 | RNVC: 2
7153535: RNCC: 3 | RNVC: 2
387005: RNCC: 3 | RNVC: 9
12600-600G: RNCC: 3 | RNVC: 9
5120-45202: RNCC: 6 | RNVC: 9

19 Jun 1980

5120-12-363-3296
Lamp Cap Extractor

123633296
5.05800.036: RNCC: 3 | RNVC: 2
3020828: RNCC: 5 | RNVC: 2

27 May 2004

5120-12-344-1285
Mater Saug- Griff

123441285
602.4: RNCC: 3 | RNVC: 2

16 Sep 1997

5120-12-371-2156
Socket Wrench Socket

123712156
770-LA21/32: RNCC: 3 | RNVC: 2
00.48.34.81: RNCC: 5 | RNVC: 2

28 Feb 2007

5120-12-344-1287
Hand Hammer

123441287
5035.08-50: RNCC: 3 | RNVC: 2

16 Sep 1997

5120-12-330-0371
Elektron Auszieher

123300371
TW2020-40/48: RNCC: 3 | RNVC: 2
TN2020-40/48: RNCC: 5 | RNVC: 2
TW2020-40/48: RNCC: 5 | RNVC: 2

24 Oct 1992

5120-12-192-3639
Abhebevorrichtung

121923639
CH1778/25: RNCC: 3 | RNVC: 2
5905892131/00: RNCC: 5 | RNVC: 2
590589213100: RNCC: 5 | RNVC: 2
CH1778/25: RNCC: 5 | RNVC: 9

19 Apr 1982

5120-12-340-6388
Hand Terminal Crimping Tool

123406388
WZ25-F-6,3: RNCC: 3 | RNVC: 2

15 May 1996

5120-12-319-7209
Schluessel

123197209
4900059-721310.000.0: RNCC: 3 | RNVC: 2

27 Oct 1989

5120-12-367-7896
Seal Inserter

123677896
038.007.25-3: RNCC: 3 | RNVC: 2
909122608: RNCC: 5 | RNVC: 2

17 Oct 2005

5120-12-388-5475
Mechanical Puller Attachment

123885475
1X56 124 659: RNCC: 3 | RNVC: 2

29 Mar 2012

5120-12-313-9261
Hand Screw Starter

123139261
390-1,2-8,0-235: RNCC: 3 | RNVC: 2

20 May 1988

5120-12-318-9107
Rohrbieg Glaetteil

123189107
7-25-000-050-40805: RNCC: 3 | RNVC: 2

24 Aug 1989

5120-12-349-3304
Inspection Mirror

123493304
EFIS 1: RNCC: 3 | RNVC: 2
EFIS 1: RNCC: 5 | RNVC: 2
5120-00340: RNCC: 6 | RNVC: 9

27 Oct 1999

5120-12-147-0971
Well Schluesselkopf

121470971
3837-107590-02-3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-182-4467
Drive Pin Punch Set

121824467
W675: RNCC: 2 | RNVC: 9
3659-8: RNCC: 3 | RNVC: 9
W34-2-16: RNCC: 5 | RNVC: 9
5120-00006: RNCC: 6 | RNVC: 9

1 Feb 1980

5120-12-177-7513
Spanner Wrench

121777513
773370: RNCC: 3 | RNVC: 9
773-65: RNCC: 5 | RNVC: 9

16 Feb 1979

5120-12-383-4702
Spanner Wr Adapter

123834702
584.01-059112-001: RNCC: 3 | RNVC: 2
642901: RNCC: 5 | RNVC: 2

25 Oct 2010

5120-12-364-9796
Inspection Mirror

123649796
2-281: RNCC: 3 | RNVC: 2

19 Nov 2004

5120-12-184-4744
Face Spanner Wrench Socket

121844744
1410101A11A161022006: RNCC: 3 | RNVC: 2

29 Jul 1980

5120-12-353-4671
Socket Wrench Extension

123534671
F30006265: RNCC: 3 | RNVC: 2

28 Mar 2001

5120-12-306-8918
Piston Ring Compressor

123068918
61346600: RNCC: 3 | RNVC: 2

15 Apr 1986

5120-12-358-8976
Electrical Contact Remover

123588976
80996060421: RNCC: 3 | RNVC: 2

26 Nov 2002

5120-12-183-1599
Combination Box And Open End Wrench

121831599
13A19-32: RNCC: 3 | RNVC: 2
40483535: RNCC: 5 | RNVC: 2

25 Mar 1980

5120-12-332-5324
Socket Wrench

123325324
3257: RNCC: 3 | RNVC: 2

18 Aug 1993

5120-12-319-4534
Lager- Und Einsatz

123194534
99374354: RNCC: 3 | RNVC: 2

3 Oct 1989

5120-12-374-3740
Combination Box And Open End Wrench

123743740
40083232-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-139-3145
Dorn

121393145
8205890643: RNCC: 3 | RNVC: 2
016M02800: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-371-4418
Spanner Wrench

123714418
1434104100: RNCC: 3 | RNVC: 2
SAF 1434104100: RNCC: 5 | RNVC: 2

30 Mar 2007

5120-12-129-9101
Aus Und Einbauvorri

121299101
AWENTW2544TZ9: RNCC: 3 | RNVC: 2
AWENTW2544TZ9: RNCC: 5 | RNVC: 2
AWENTW2544TZ9: RNCC: 5 | RNVC: 2
AWENTW2544TZ9: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-092-2892

5120-12-025-9477

5120-12-310-1337
Hydraulic Jack Handle

123101337
206.626.2: RNCC: 3 | RNVC: 2
0005834545: RNCC: 5 | RNVC: 2
81.66805.6052: RNCC: 5 | RNVC: 2

9 Apr 1987

5120-12-388-5814
Flat Tip Screwdriver

123885814
26966: RNCC: 3 | RNVC: 2
302K-6,5: RNCC: 5 | RNVC: 2

3 Apr 2012

5120-12-354-8160
Mechanical Puller

123548160
32-1: RNCC: 3 | RNVC: 2

28 Aug 2001

5120-12-187-1924
Socket Wrench

121871924
6719216: RNCC: 2 | RNVC: 2
6719216: RNCC: 3 | RNVC: 2
6719216: RNCC: 5 | RNVC: 9
42182-11670: RNCC: 5 | RNVC: 9

11 Mar 1981

5120-12-126-2179
Mallet Handle

121262179
TL5120-0008STIEL: RNCC: 2 | RNVC: 2
5120-008STIEL: RNCC: 5 | RNVC: 9
5120-0008STIEL: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-170-6934
Einstell- Dorn

121706934
1213-100-10: RNCC: 3 | RNVC: 2
1213-100-10: RNCC: 5 | RNVC: 9

28 Jul 1977

5120-12-378-2509
Pliers

123782509
30 25 160: RNCC: 3 | RNVC: 2
4003773035060: RNCC: 5 | RNVC: 2
711600-160: RNCC: 5 | RNVC: 2
SN1595: RNCC: 5 | RNVC: 2
3025160: RNCC: 5 | RNVC: 9

23 Mar 2009

5120-12-146-0589
Aufdrueck- Huelse

121460589
23114-7101-06: RNCC: 2 | RNVC: 2
510157: RNCC: 5 | RNVC: 2
510157: RNCC: 5 | RNVC: 9
23114-7101-06: RNCC: 5 | RNVC: 9
510157: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-316-4644
Hand Pinzettensatz

123164644
NO PRIMARY REF 12-316-4644: RNCC: 3 | RNVC: 2
5485K-20: RNCC: 5 | RNVC: 9
5485K/20: RNCC: 5 | RNVC: 9
108671: RNCC: 5 | RNVC: 9

19 Jan 1989

5120-12-304-5232
Swivel Knob Jeweler's Screwdriver Set

123045232
52714-200: RNCC: 3 | RNVC: 2

26 Jul 1985

5120-12-140-9710
Montagevorrichtung

121409710
2895-020: RNCC: 3 | RNVC: 2
2895020: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-300-4857
Spanner Wrench

123004857
G005/121000: RNCC: 3 | RNVC: 2
G005/121000: RNCC: 5 | RNVC: 9

7 Aug 1984

5120-12-369-8710
Torque Wrench

123698710
4101-05: RNCC: 3 | RNVC: 2
1646206: RNCC: 5 | RNVC: 2

23 Aug 2006

5120-12-369-5359
Socket Wrench Socket

123695359
80996120021: RNCC: 3 | RNVC: 2
80.99612-0021: RNCC: 5 | RNVC: 2

19 Jul 2006

5120-12-318-0779
Drive Pin Punch

123180779
3644-120: RNCC: 3 | RNVC: 9

8 Jun 1989

5120-12-171-7732
Socket Head Screw Key Set

121717732
2100/10P: RNCC: 3 | RNVC: 2
2100-10P: RNCC: 3 | RNVC: 9
4439330002: RNCC: 5 | RNVC: 2

11 Nov 1977

5120-12-326-3769
Cable Type Ratchet Lever Puller

123263769
TL5120-0080 2.2.1: RNCC: 2 | RNVC: 2

9 Sep 1991

5120-12-366-8440
Sc Montierwerkzeug

123668440
6417 1 850-00: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-12-315-4020
Socket Wrench Crowfoot Attachment

123154020
440A-2 3/8: RNCC: 3 | RNVC: 2

19 Oct 1988

5120-12-133-3980
Screwdriver Bit

121333980
55Z1-4: RNCC: 3 | RNVC: 2
114457: RNCC: 5 | RNVC: 2
6990Z1-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-306-3833
Electronic Equipment Alignment Tool

123063833
LZ0310377: RNCC: 3 | RNVC: 2
031.0377: RNCC: 5 | RNVC: 9

25 Feb 1986

5120-12-164-1232
Open End Wrench

121641232
4300100: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-384-3263
Seal Inserter

123843263
F30378550: RNCC: 3 | RNVC: 2

14 Feb 2011

5120-12-168-3397
Dorn

121683397
4172191: RNCC: 3 | RNVC: 2

10 Mar 1977

5120-12-026-6085

5120-12-070-0144

5120-12-171-9953
Socket Wrench Socket

121719953
6300M7: RNCC: 3 | RNVC: 2
108764: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-094-0331

5120-12-372-3149
Torque Wrench Adapter

123723149
5064-180402A00C: RNCC: 3 | RNVC: 2

6 Jul 2007

5120-12-193-6834
Zentrier- Kegel

121936834
S51577-0000: RNCC: 3 | RNVC: 2

19 Aug 1982

5120-12-363-2952
Spanner Wrench

123632952
2171-9855-030: RNCC: 3 | RNVC: 2

20 May 2004

5120-12-171-0560
Duese Halter

121710560
80.99606.0008: RNCC: 3 | RNVC: 2
403 589 00 31/00: RNCC: 3 | RNVC: 2
8122563: RNCC: 5 | RNVC: 2
80.99606-0008: RNCC: 5 | RNVC: 2
80996060008: RNCC: 5 | RNVC: 2
4035890031/00: RNCC: 5 | RNVC: 2
403589003100: RNCC: 5 | RNVC: 9

1 Sep 1977

5120-12-334-2950
Cross Tip Screwdriver

123342950
NM257-13: RNCC: 3 | RNVC: 2
NM257-13: RNCC: 5 | RNVC: 9

25 Apr 1994

5120-12-392-6247
Hand Hydraulic Jack

123926247
13300003: RNCC: 3 | RNVC: 2
JH-2A: RNCC: 5 | RNVC: 2
JH-2A: RNCC: 5 | RNVC: 2

24 Jun 2013

5120-12-360-7793
Electronic Equipment Alignment Tool

123607793
1-182: RNCC: 3 | RNVC: 2

8 Jul 2003

5120-12-353-8518
Bearing And Bushing Inserter And Remover

123538518
HMV 29 A: RNCC: 3 | RNVC: 2

15 May 2001

5120-12-350-2711
Bl Ausbeulwerkzeug

123502711
065: RNCC: 3 | RNVC: 2

9 Mar 2000

5120-12-196-7396
Mechanical Puller

121967396
1X56136971: RNCC: 3 | RNVC: 2
1X56136971: RNCC: 5 | RNVC: 2

9 Aug 1983

5120-12-050-1786

5120-12-366-2650
Dreh Haltewerkzeug

123662650
VR-T10-0002: RNCC: 3 | RNVC: 2
T632G30T0005: RNCC: 5 | RNVC: 2

1 Apr 2005

5120-12-305-2545
Rohrbieger Dorn

123052545
5-5/80-028-000-21445: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-159-0126
Box Wrench

121590126
400000-8150: RNCC: 3 | RNVC: 2
6690007-520000.000.0: RNCC: 5 | RNVC: 2
6690007-520000-000-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-151-6561
Hand Rivet Set

121516561
1004-0100W3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-379-7120
Torque Wrench

123797120
7601610: RNCC: 3 | RNVC: 2
4550-20: RNCC: 3 | RNVC: 2
9240074561: RNCC: 5 | RNVC: 2
4550-20: RNCC: 5 | RNVC: 2
7601610: RNCC: 5 | RNVC: 2
4550-20: RNCC: 5 | RNVC: 2
985016: RNCC: 5 | RNVC: 2

25 Aug 2009

5120-12-194-3029
Hand Blind Riveter

121943029
TL5120-0060: RNCC: 2 | RNVC: 9
GS 2000: RNCC: 5 | RNVC: 2
GS2000: RNCC: 5 | RNVC: 2
JD857167081: RNCC: 5 | RNVC: 2
5120-43310: RNCC: 6 | RNVC: 9

20 Oct 1982

5120-12-326-0172
Mechanical Puller

123260172
63-400L: RNCC: 3 | RNVC: 2
001589473300: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-310-6967
Hand Hammer Head

123106967
DIN1042-A4: RNCC: 2 | RNVC: 2
A4DIN1042: RNCC: 5 | RNVC: 2

22 Jun 1987

5120-12-321-1378
Schluessel

123211378
272.369 558: RNCC: 2 | RNVC: 2
272.369 558: RNCC: 3 | RNVC: 2
CTWA-18: RNCC: 5 | RNVC: 2

2 Apr 1990

5120-12-390-3971
Bracing Device

123903971
5805890214/00: RNCC: 3 | RNVC: 2

8 Nov 2012

5120-12-142-2753
Spanner Wrench

121422753
38070-00.01: RNCC: 2 | RNVC: 2
38070-00-01: RNCC: 5 | RNVC: 9
38070-00.01: RNCC: 5 | RNVC: 9
3870-00-02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-2540
Rohrbieger Dorn

123052540
5-1/20-028-000-21436: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-175-1646
Pliers

121751646
DIN5236-A140GERAUHT: RNCC: 2 | RNVC: 9
170-561 145: RNCC: 3 | RNVC: 2
8132-5-3-4: RNCC: 3 | RNVC: 9
9087-1: RNCC: 5 | RNVC: 9
1841A-1: RNCC: 5 | RNVC: 9
5373980001: RNCC: 5 | RNVC: 9
A140DIN5236GERAUHT: RNCC: 5 | RNVC: 9
8132-5.3/4C: RNCC: 5 | RNVC: 9

28 Aug 1978

5120-12-144-6090
Einpreszvorrichtung

121446090
8375893343-00: RNCC: 3 | RNVC: 2
8375893343: RNCC: 5 | RNVC: 2
837589334300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-370-9169
Socket Head Screw Key

123709169
54963: RNCC: 3 | RNVC: 2
00.43.42.74: RNCC: 5 | RNVC: 2
5496-T20: RNCC: 5 | RNVC: 2
4001002549630: RNCC: 5 | RNVC: 2

16 Jan 2007

5120-12-133-3754
Socket Wrench Socket

121333754
A7402DZ-3/4: RNCC: 3 | RNVC: 2
46A3-4: RNCC: 3 | RNVC: 2
182012: RNCC: 5 | RNVC: 2
02420040: RNCC: 5 | RNVC: 2
109352: RNCC: 5 | RNVC: 9
7402DZ3-4: RNCC: 5 | RNVC: 9
09950: RNCC: 5 | RNVC: 9
2386120027: RNCC: 5 | RNVC: 9
880TAZ-3/4: RNCC: 5 | RNVC: 9
880TAZ3-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-319-4529
Lager- Und Einsatz

123194529
99374375: RNCC: 3 | RNVC: 2

3 Oct 1989

5120-12-126-2614
Quick Adjusting Screw Clamp

121262614
W15-8: RNCC: 3 | RNVC: 2
613D103-80: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-312-2176
Aligning Punch

123122176
VW385/4: RNCC: 3 | RNVC: 2

4 Dec 1987

5120-12-379-5422
Open End Wrench

123795422
6673310: RNCC: 3 | RNVC: 2
04010886667330: RNCC: 5 | RNVC: 2
6673310: RNCC: 5 | RNVC: 2
DS 3114 50: RNCC: 5 | RNVC: 2
04010886667330: RNCC: 5 | RNVC: 2
DS 3114 50: RNCC: 5 | RNVC: 2
4010886667330: RNCC: 5 | RNVC: 9
4010886667330: RNCC: 5 | RNVC: 9

5 Aug 2009

5120-12-197-3403
Schraubst Anschlag

121973403
0203D101544/1-3: RNCC: 3 | RNVC: 2

13 Oct 1983

5120-12-313-4425
Mechanical Puller

123134425
317/2: RNCC: 3 | RNVC: 2

31 Mar 1988

5120-12-364-3151
Socket Wrench Screwdriver Attachment

123643151
01120006-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-339-4730
Face Spanner Wrench Socket

123394730
55732S0006: RNCC: 3 | RNVC: 2

27 Nov 1995

5120-12-363-9846
Bearing And Bushing Inserter

123639846
T671P5002263: RNCC: 3 | RNVC: 2

10 Aug 2004

5120-12-349-9197
Montierhuelse

123499197
45.004.51.173: RNCC: 3 | RNVC: 2

26 Jan 2000

5120-12-358-2510
Screwdriver Bit

123582510
614787205: RNCC: 3 | RNVC: 2
614 787 205: RNCC: 5 | RNVC: 2

1 Oct 2002

5120-12-382-8517
Friction Igniter

123828517
3.2077: RNCC: 3 | RNVC: 2

16 Aug 2010

5120-12-140-9005
Socket Wrench

121409005
075030: RNCC: 3 | RNVC: 2
25-14: RNCC: 3 | RNVC: 2
211559: RNCC: 5 | RNVC: 9
75-14: RNCC: 5 | RNVC: 9
25-14: RNCC: 5 | RNVC: 9
25-14: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-7183
Montagevorrichtung

121767183
3-9314-4950-3: RNCC: 3 | RNVC: 2
000589524300: RNCC: 5 | RNVC: 2
7083624: RNCC: 5 | RNVC: 2

13 Dec 1978

5120-12-314-1333
Pedal Adjustment Tool Compressor

123141333
125310: RNCC: 3 | RNVC: 2
E7441-00-00: RNCC: 5 | RNVC: 2
698-716-0010: RNCC: 5 | RNVC: 2

10 Jun 1988

5120-12-153-7183
Face Spanner Wrench Socket

121537183
CH1773-19FE: RNCC: 3 | RNVC: 2
5615890309/00: RNCC: 5 | RNVC: 2
561589030900: RNCC: 5 | RNVC: 2
CH1773-19FE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-173-4658
Spanner Wrench

121734658
V7001-013-850-17: RNCC: 3 | RNVC: 2

18 Apr 1978

5120-12-347-2275
Hand Terminal Crimping Tool

123472275
56980.106.753: RNCC: 3 | RNVC: 2
56980.106.753: RNCC: 5 | RNVC: 2
56981.101.800: RNCC: 5 | RNVC: 9

16 Nov 1998

5120-12-191-8735
Screwdriver Bit

121918735
61209900: RNCC: 3 | RNVC: 2
6429-8: RNCC: 5 | RNVC: 2
2054/8: RNCC: 5 | RNVC: 9

15 Mar 1982

5120-12-384-3304
Swivel Knob Jeweler's Screwdriver

123843304
00525: RNCC: 3 | RNVC: 2
263P-3,0X60: RNCC: 5 | RNVC: 2
751721361208: RNCC: 6 | RNVC: 9

14 Feb 2011

5120-12-165-1725
Spannelement

121651725
58027506020: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-140-2934

5120-12-393-5622
Spanner Wrench

123935622
7186416: RNCC: 3 | RNVC: 2

24 Sep 2013

5120-12-348-3712
Combination Box And Open End Wrench

123483712
520-990000.04.0: RNCC: 2 | RNVC: 2
520-990000.04.0: RNCC: 3 | RNVC: 2

10 Jun 1999

5120-12-121-6476
Hammer Handle

121216476
45-600X37X22: RNCC: 3 | RNVC: 2
21-600-37-22: RNCC: 5 | RNVC: 9
600X34-5DIN5113: RNCC: 5 | RNVC: 9
DIN5113-600X34: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-365-6435
Mechanical Puller Attachment

123656435
612-001-20: RNCC: 3 | RNVC: 2
80996010230: RNCC: 5 | RNVC: 2

20 Jan 2005

5120-12-382-7469
Socket Head Screw Key

123827469
73101005-TCS: RNCC: 3 | RNVC: 2

4 Aug 2010

5120-12-332-1593
Socket Wrench Socket

123321593
702-150250-902-0: RNCC: 3 | RNVC: 2

22 Jul 1993

5120-12-177-5783
Haltevorrichtung

121775783
UFG301-21: RNCC: 3 | RNVC: 2
UFG301-21: RNCC: 3 | RNVC: 9

7 Feb 1979

5120-12-327-9110
Socket Wrench Socket

123279110
A6710DZ-11/32: RNCC: 3 | RNVC: 2
175757: RNCC: 5 | RNVC: 2

19 Mar 1992

5120-12-382-1929
Socket Head Screw Key

123821929
0250040S: RNCC: 3 | RNVC: 2

20 May 2010

5120-12-324-0724
Socket Wrench Screwdriver Attachment

123240724
A6709M-3,5: RNCC: 3 | RNVC: 2
175404: RNCC: 5 | RNVC: 2

18 Jan 1991

5120-12-126-4679
Electronic Equipment Alignment Tool

121264679
5509-2: RNCC: 3 | RNVC: 2
108689: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-190-5468
Pliers

121905468
NAZ 216.1: RNCC: 3 | RNVC: 2
NAZ216-1: RNCC: 3 | RNVC: 2

2 Dec 1981

5120-12-183-9678
Socket Wrench Socket

121839678
A6700DM-6: RNCC: 3 | RNVC: 2
91619065: RNCC: 5 | RNVC: 2
6700DM6: RNCC: 5 | RNVC: 9

7 Jun 1980

5120-12-311-2411
Hand Hammer

123112411
1675-1: RNCC: 3 | RNVC: 2

7 Aug 1987

5120-12-123-5072

5120-12-363-9851
Bearing And Bushing Inserter

123639851
T671P5002276: RNCC: 3 | RNVC: 2

10 Aug 2004

5120-12-022-7364

5120-12-091-6178

5120-12-392-9222
Mechanical Puller

123929222
EFT-0079-001: RNCC: 3 | RNVC: 2

23 Jul 2013

5120-12-300-1909
Torque Wrench

123001909
TQSR1FUA: RNCC: 3 | RNVC: 2
6969N: RNCC: 5 | RNVC: 9
5120-01300: RNCC: 6 | RNVC: 9

12 Jul 1984

5120-12-173-2286
Hebel

121732286
009-017-200-000W59: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-12-336-3057
Driftpin

123363057
5306-0010-100000: RNCC: 3 | RNVC: 2

9 Nov 1994

5120-12-364-3482
Inspection Mirror

123643482
77401030-TCS: RNCC: 3 | RNVC: 2
77400002-TCS: RNCC: 5 | RNVC: 9

14 Sep 2004

5120-12-153-7959
Schluesseleinsatz

121537959
CH2278-10: RNCC: 3 | RNVC: 2
5615890109/00: RNCC: 5 | RNVC: 2
561589010900: RNCC: 5 | RNVC: 2
CH2278-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-2810
Open End Wrench

121532810
NM284-10: RNCC: 3 | RNVC: 2
1201 9455: RNCC: 5 | RNVC: 2
NM284-10: RNCC: 5 | RNVC: 9
A26-50-111: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-354-9515
Driftpin

123549515
SK157319-301: RNCC: 3 | RNVC: 2

10 Sep 2001

5120-12-151-6506
Montagevorrichtung

121516506
23111-7155.00: RNCC: 2 | RNVC: 2
23111-7155.00: RNCC: 3 | RNVC: 2
23111-7155-00: RNCC: 5 | RNVC: 9
23111-7155.00: RNCC: 5 | RNVC: 9
23111-7155-00: RNCC: 5 | RNVC: 9
23111-7155-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-7625
Crimpzange Kopf

123717625
1187-09101: RNCC: 3 | RNVC: 2
80.99625-0110: RNCC: 5 | RNVC: 2
80996250110: RNCC: 5 | RNVC: 2

11 May 2007

5120-12-150-4502
Stanz- Stempelsatz

121504502
TL5120-0059-19: RNCC: 2 | RNVC: 2
90-84-82-83: RNCC: 3 | RNVC: 2
5120-0059-21: RNCC: 5 | RNVC: 9
5120-059-21: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-131-4941
Schluessel

121314941
029M00600: RNCC: 3 | RNVC: 2
VM52061: RNCC: 5 | RNVC: 2
VM52-061: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-363-9273
Bearing And Bushing Inserter

123639273
T670P5001270: RNCC: 3 | RNVC: 2

5 Aug 2004

5120-12-094-1268

5120-12-181-7435
Box Wrench

121817435
25300051: RNCC: 3 | RNVC: 2
2-10007-4: RNCC: 5 | RNVC: 2
2522: RNCC: 5 | RNVC: 9

14 Dec 1979

5120-12-127-0854
Box Wrench

121270854
NO PRIMARY REF 12-127-0854: RNCC: 3 | RNVC: 2
41462428: RNCC: 5 | RNVC: 9
22A3-8X7-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-182-2092
Socket Wrench Socket

121822092
NO PRIMARY REF 12-182-2092: RNCC: 3 | RNVC: 2
2775: RNCC: 5 | RNVC: 9
5724660001: RNCC: 5 | RNVC: 9

21 Jan 1980

5120-12-383-5505
Spanner Wrench

123835505
23-530-JK-388: RNCC: 3 | RNVC: 2

5 Nov 2010

5120-12-176-2227
Flat Tip Screwdriver

121762227
60110: RNCC: 3 | RNVC: 2
8000-2X12X250: RNCC: 3 | RNVC: 2
131489: RNCC: 5 | RNVC: 2
01.73.87.24: RNCC: 5 | RNVC: 2
01.71.70.01: RNCC: 5 | RNVC: 2

13 Nov 1978

5120-12-342-6378
Spanner Wrench

123426378
87-401-90-00.10-00: RNCC: 3 | RNVC: 2

11 Mar 1997

5120-12-131-4961
Socket Wrench

121314961
NO PRIMARY REF 12-131-4961: RNCC: 3 | RNVC: 2
129809: RNCC: 5 | RNVC: 9
1945UM11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-121-8496
Marlinespike

121218496
TL5120-0029-C: RNCC: 2 | RNVC: 2
5120-0029ITEMC: RNCC: 5 | RNVC: 9
5120-029ITEMC: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-9537
Hole Sheet Metal Holder

121749537
232-2072K-24: RNCC: 3 | RNVC: 2
2072K24: RNCC: 5 | RNVC: 2
232-2072K-24 0 2,4 MM: RNCC: 5 | RNVC: 9

9 Aug 1978

5120-12-182-1075
Socket Head Screw Key

121821075
70.1101.014-00: RNCC: 3 | RNVC: 2
1997MB2-5: RNCC: 3 | RNVC: 9
130228: RNCC: 5 | RNVC: 2

14 Jan 1980

5120-12-175-8968
Spanner Wrench

121758968
750.00-01-00-01-091: RNCC: 3 | RNVC: 2
750-00-010001091: RNCC: 5 | RNVC: 2

25 Oct 1978

5120-12-327-4573
Socket Wrench Socket

123274573
130219: RNCC: 3 | RNVC: 2
02851630: RNCC: 3 | RNVC: 2
02851630: RNCC: 3 | RNVC: 9
DIN7448-S19X10/ISOLIERT 1000V: RNCC: 5 | RNVC: 9

23 Jan 1992

5120-12-198-1730
Open End Wrench

121981730
2.72-20630: RNCC: 3 | RNVC: 2
2.72-20630: RNCC: 5 | RNVC: 2

27 Dec 1983

5120-12-327-1105
Hand Beading Tool

123271105
15368802: RNCC: 3 | RNVC: 2
153 688 02: RNCC: 5 | RNVC: 2

3 Dec 1991

5120-12-171-0566
Box Wrench

121710566
403589020300: RNCC: 3 | RNVC: 2
2758-17: RNCC: 3 | RNVC: 2
4035890203/00: RNCC: 5 | RNVC: 2
403 589 02 03/00: RNCC: 5 | RNVC: 2
0730580: RNCC: 5 | RNVC: 2
403 589 02 03/00: RNCC: 5 | RNVC: 2
5719610004: RNCC: 5 | RNVC: 2

1 Sep 1977

5120-12-331-3171
Torque Wrench

123313171
NO PRIMARY REF 12-331-3171: RNCC: 3 | RNVC: 2
2098-0753-54 MIT ZUB: RNCC: 5 | RNVC: 9
5120-01422: RNCC: 6 | RNVC: 9

21 Apr 1993

5120-12-347-3256
Seal Inserter

123473256
21-102-03: RNCC: 3 | RNVC: 2

26 Nov 1998

5120-12-321-0464
Hole Sheet Metal Holder

123210464
AT500-55: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-12-177-5780
Face Spanner Wrench Socket

121775780
UHG303-24: RNCC: 3 | RNVC: 2
UHG303-24: RNCC: 5 | RNVC: 9

7 Feb 1979

5120-12-154-1016
Anlaszve Auszieher

121541016
CH2267-8NM: RNCC: 3 | RNVC: 2
839589253300: RNCC: 5 | RNVC: 2
CH2267-8NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-329-2136
Crimping Tool Die

123292136
FA0004-082: RNCC: 3 | RNVC: 2
FA0004-082: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-12-368-7454
Socket Wrench Screwdriver Attachment

123687454
8802-T20: RNCC: 3 | RNVC: 2
49TX-T20: RNCC: 3 | RNVC: 2
3244-TX 20: RNCC: 3 | RNVC: 2
00.47.64.11: RNCC: 5 | RNVC: 2
02100020: RNCC: 5 | RNVC: 2

12 Apr 2006

5120-12-163-6636
Abziehvorrichtung

121636636
26-21C1446G002: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-144-4567
Mechanical Puller

121444567
WL81: RNCC: 3 | RNVC: 2
71.74350-3723: RNCC: 5 | RNVC: 2
71743503723: RNCC: 5 | RNVC: 2
83.09143-6001: RNCC: 5 | RNVC: 2
83091436001: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-137-4187

5120-12-368-8982
Tap Extractor

123688982
33-7B: RNCC: 3 | RNVC: 2
01.98.85.00: RNCC: 5 | RNVC: 2

4 May 2006

5120-12-150-9814
Spanner Wrench

121509814
15SK0668: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-369-3022
Socket Head Screw Key

123693022
110816: RNCC: 3 | RNVC: 2

19 Jun 2006

5120-12-126-1627

5120-12-123-5933
Socket Wrench Crowfoot Attachment

121235933
1950Z7-16: RNCC: 3 | RNVC: 2
105603: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-178-5393
Open End Wrench

121785393
NO PRIMARY REF 12-178-5393: RNCC: 3 | RNVC: 2
12E4BA: RNCC: 5 | RNVC: 9
40769595: RNCC: 5 | RNVC: 9

27 Apr 1979

5120-12-365-7814
Pliers

123657814
T3783D-145: RNCC: 3 | RNVC: 2

2 Feb 2005

5120-12-173-6994
Machinist's Vise

121736994
NO PRIMARY REF 12-173-6994: RNCC: 3 | RNVC: 2
MATADOR135-0DREHTELLER: RNCC: 5 | RNVC: 9
MATAD0R135-0DREHTELLER: RNCC: 5 | RNVC: 9

3 May 1978

5120-12-176-7322
Druckstueck

121767322
VG95211-ML-121767322: RNCC: 2 | RNVC: 2
105-21832W1.14: RNCC: 3 | RNVC: 2
105-21832W1-14: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-353-8474
Bearing And Bushing Inserter And Remover

123538474
5415890133/00: RNCC: 3 | RNVC: 2
403589003300: RNCC: 5 | RNVC: 2
403589003300: RNCC: 5 | RNVC: 2
541589013300: RNCC: 5 | RNVC: 2

15 May 2001

5120-12-337-3868
Box Wrench

123373868
11.49001-0424: RNCC: 3 | RNVC: 2
030.122: RNCC: 5 | RNVC: 2
11.49001-0424: RNCC: 5 | RNVC: 9
030.122: RNCC: 5 | RNVC: 9

22 Feb 1995

5120-12-181-5079
Drehvorrichtung

121815079
125500: RNCC: 3 | RNVC: 2
698-760-0031: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-332-7076
Mechanical Puller

123327076
P-0-876: RNCC: 3 | RNVC: 2

9 Sep 1993

5120-12-129-4516
Slip Joint Pliers

121294516
966-240: RNCC: 3 | RNVC: 2
2617: RNCC: 5 | RNVC: 9
C240DIN5231-GERAUHT: RNCC: 5 | RNVC: 9
DIN5231-C240GERAUHT: RNCC: 5 | RNVC: 9
106559: RNCC: 5 | RNVC: 9
C240 DIN 5231-GERAUHT: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-7432
Boerdelwerkzeug

121817432
25300029: RNCC: 3 | RNVC: 2
2-10003-4: RNCC: 5 | RNVC: 2
2518: RNCC: 5 | RNVC: 2

14 Dec 1979

5120-12-324-0725
Socket Wrench Screwdriver Attachment

123240725
A6709M-4,5: RNCC: 3 | RNVC: 2
175439: RNCC: 5 | RNVC: 2

18 Jan 1991

5120-12-385-9351
Combination Box And Open End Wrench

123859351
I002429: RNCC: 3 | RNVC: 2

22 Jul 2011

5120-12-389-2788
Hand Caulking Tool

123892788
741589006300: RNCC: 3 | RNVC: 2
741589006300: RNCC: 5 | RNVC: 2

15 Jun 2012

5120-12-315-3203
Hyd Ausbauwerkzeug

123153203
4900153-31310-00-01: RNCC: 3 | RNVC: 2
4900153-31310-01: RNCC: 5 | RNVC: 2

12 Oct 1988

5120-12-388-0292
Aligning Punch

123880292
F30379938: RNCC: 3 | RNVC: 2

17 Feb 2012

5120-12-314-2434
Wire Twister Pliers

123142434
NO PRIMARY REF 12-314-2434: RNCC: 3 | RNVC: 2
2855F-225: RNCC: 5 | RNVC: 9
2855F9PL: RNCC: 5 | RNVC: 9

21 Jun 1988

5120-12-389-8586
Torque Wrench

123898586
730N/2 UND 734/4: RNCC: 3 | RNVC: 2
5120-40340: RNCC: 6 | RNVC: 9

5 Sep 2012

5120-12-156-1370
Ein- Und Ausbauvorr

121561370
25704-360735.00.0: RNCC: 2 | RNVC: 2
25704-360735.00.0: RNCC: 3 | RNVC: 2
25704-360735-00-0: RNCC: 5 | RNVC: 2
25704-360735.00.0: RNCC: 5 | RNVC: 2
25704-360735-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-7840
Socket Wrench

121397840
NO PRIMARY REF 12-139-7840: RNCC: 3 | RNVC: 2
43110208: RNCC: 5 | RNVC: 9
1600-28: RNCC: 5 | RNVC: 9
1042: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-375-9757
Blindn Nietzugkopf

123759757
349307: RNCC: 3 | RNVC: 2

28 Jul 2008

5120-12-383-5012
Vise Jaw Set

123835012
5.4090: RNCC: 3 | RNVC: 2

28 Oct 2010

5120-12-337-1804
Mechanical Puller Attachment

123371804
8511774.002: RNCC: 3 | RNVC: 2
0851 1774.002: RNCC: 5 | RNVC: 2

30 Jan 1995

5120-12-365-9738
Box Wrench

123659738
41612024-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-382-7543
Screwdriver Bit

123827543
05059480001: RNCC: 3 | RNVC: 2
800/4Z-0,8X4,0X89: RNCC: 5 | RNVC: 2
800/4Z0,8X4,0X89: RNCC: 5 | RNVC: 9

5 Aug 2010

5120-12-359-5466
Face Spanner Wrench Socket

123595466
71135: RNCC: 3 | RNVC: 2
71135-645: RNCC: 5 | RNVC: 2

17 Feb 2003

5120-12-328-2171
Machinist's Vise

123282171
550589195900: RNCC: 3 | RNVC: 2
550 589 19 59 00: RNCC: 5 | RNVC: 2
5505891959-00: RNCC: 5 | RNVC: 2
5505891959/00: RNCC: 5 | RNVC: 2

22 Apr 1992

5120-12-305-0675
Open End Wrench

123050675
SWN 01.0604/15: RNCC: 3 | RNVC: 2
SWN01-0604-15: RNCC: 5 | RNVC: 2

24 Sep 1985

5120-12-172-1848
Spanner Wrench

121721848
903-812-0089: RNCC: 3 | RNVC: 2
903-812-0089: RNCC: 5 | RNVC: 9

3 Jan 1978

5120-12-123-5059
Open End Wrench

121235059
200-25X28: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-350-8469
Machinist's Vise

123508469
HEUERFRONT140MMFEST: RNCC: 3 | RNVC: 2
HEUERFRONT140MMFEST: RNCC: 5 | RNVC: 9

29 May 2000

5120-12-171-2821
Montagevorrichtung

121712821
VG95211-ML-121712821: RNCC: 2 | RNVC: 2
105-31711W5: RNCC: 3 | RNVC: 2

26 Sep 1977

5120-12-123-5760
Socket Wrench Socket

121235760
NO PRIMARY REF 12-123-5760: RNCC: 3 | RNVC: 2
7800DM35: RNCC: 5 | RNVC: 9
109739: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-124-8502
Schluessel

121248502
35-10-65: RNCC: 3 | RNVC: 2
FW376F: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-388-9796
Seal Inserter

123889796
80996040345: RNCC: 3 | RNVC: 2
80.99604-0345: RNCC: 5 | RNVC: 2

11 May 2012

5120-12-127-0931
Open End Wrench

121270931
NO PRIMARY REF 12-127-0931: RNCC: 3 | RNVC: 2
1927Z4-5-8IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-0940
Socket Wrench

121470940
3807-007503-01-3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-129-8806
Abziehglocke

121298806
1680506001: RNCC: 3 | RNVC: 2
EF3041: RNCC: 5 | RNVC: 2
KDAW9995-0-4: RNCC: 5 | RNVC: 9
1680506001: RNCC: 5 | RNVC: 9
EF3041: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-3146
Socket Wrench Socket

123643146
01240013-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-368-4343
Socket Wrench Adapter

123684343
2238-1: RNCC: 3 | RNVC: 2

9 Mar 2006

5120-12-371-7252
Spanner Wrench

123717252
405589000700: RNCC: 3 | RNVC: 2

9 May 2007

5120-12-319-4714
Mechanical Puller Attachment

123194714
4900059-751450.002.0: RNCC: 3 | RNVC: 2

4 Oct 1989

5120-12-193-6570
Seal Inserter

121936570
S51575-0000: RNCC: 3 | RNVC: 2

17 Aug 1982

5120-12-387-5591
Seal Inserter

123875591
80996040125: RNCC: 3 | RNVC: 2
80.99604-0125: RNCC: 5 | RNVC: 2

10 Jan 2012

5120-12-391-3254
Pliers

123913254
65305160: RNCC: 3 | RNVC: 2

5 Mar 2013

5120-12-336-5084
Bearing And Bushing Inserter

123365084
0852 3028: RNCC: 3 | RNVC: 2
8523028: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-379-0542
Spanner Wrench

123790542
D0103899-001: RNCC: 3 | RNVC: 2
D0103899 000: RNCC: 5 | RNVC: 2

18 Jun 2009

5120-12-373-1216
Socket Wrench Adapter

123731216
96-00: RNCC: 3 | RNVC: 2

28 Sep 2007

5120-12-316-3962
Offset Screwdriver

123163962
530382-0042.000: RNCC: 2 | RNVC: 2
530382-0042.000: RNCC: 3 | RNVC: 2
530382-0042.000: RNCC: 5 | RNVC: 9

13 Jan 1989

5120-12-339-0758
Box Wrench

123390758
18-14X15: RNCC: 3 | RNVC: 2
41021415: RNCC: 5 | RNVC: 2

9 Oct 1995

5120-12-347-8311
Open End Wrench

123478311
24-002: RNCC: 3 | RNVC: 2

19 Feb 1999

5120-12-194-0456
Socket Head Screw Key

121940456
NM290-04L: RNCC: 3 | RNVC: 2
NM290-04L: RNCC: 5 | RNVC: 9
DIN911-6LTLAWN482: RNCC: 5 | RNVC: 9

27 Sep 1982

5120-12-368-2599
Combination Box And Open End Wrench

123682599
40484040-TCS: RNCC: 3 | RNVC: 2

18 Jan 2006

5120-12-345-3728
Montierhuelse

123453728
F6 342727: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-312-2076
Bearing And Bushing Inserter

123122076
310589001500: RNCC: 3 | RNVC: 2

3 Dec 1987

5120-12-131-4980
Socket Wrench

121314980
27-904-48: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-330-1900
Face Spanner Wrench Socket

123301900
4900255-133000-00-00: RNCC: 2 | RNVC: 2
4900255-133000-00-00: RNCC: 3 | RNVC: 2

12 Nov 1992

5120-12-150-6190
Mechanical Puller

121506190
1X46089474: RNCC: 3 | RNVC: 2
V89474-1P3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-196-9579
Ausklink- Nocken

121969579
E4-2004150: RNCC: 3 | RNVC: 2
E4-2004150: RNCC: 5 | RNVC: 9

5 Sep 1983

5120-12-132-4287
Drain Plug Wrench

121324287
CH1915-33: RNCC: 3 | RNVC: 2
01154405: RNCC: 5 | RNVC: 2
CH1915-33: RNCC: 5 | RNVC: 9
6-0864-23-0-000-8: RNCC: 5 | RNVC: 9
6.0864.23.0.0008: RNCC: 5 | RNVC: 9
6.086.423.0000.8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-389-5108
Torque Wrench Adapter

123895108
R809303: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-123-0223
Open End Wrench

121230223
200-17X22: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-330-4726
Mechanical Puller Attachment

123304726
0852 0364.006: RNCC: 3 | RNVC: 2
8520364.006: RNCC: 5 | RNVC: 2

18 Dec 1992

5120-12-369-1045
Montierhuelse

123691045
0986613249: RNCC: 3 | RNVC: 2

22 May 2006

Load More Results