What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 45 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 45 of 62

5120-12-384-3257
Torque Wrench

123843257
F30520703: RNCC: 3 | RNVC: 2

14 Feb 2011

5120-12-350-9182
Torque Wrench

123509182
730-4: RNCC: 3 | RNVC: 2
50180004: RNCC: 5 | RNVC: 2

5 Jun 2000

5120-12-324-5807
Cross Tip Screwdriver

123245807
8080-5: RNCC: 3 | RNVC: 2
162779: RNCC: 5 | RNVC: 2

1 Mar 1991

5120-12-358-2717
Retaining Ring Installation Tool

123582717
5X56000092: RNCC: 3 | RNVC: 2
131510: RNCC: 5 | RNVC: 2

7 Oct 2002

5120-12-135-5428
Einfuehrvorrichtung

121355428
VM70478: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-320-5619
Combination Box And Open End Wrench

123205619
52036040: RNCC: 3 | RNVC: 2
16-4: RNCC: 3 | RNVC: 2

26 Jan 1990

5120-12-324-7171
Mechanical Puller Adapter

123247171
3 11 1 680: RNCC: 3 | RNVC: 2
30 111 680: RNCC: 5 | RNVC: 9

19 Mar 1991

5120-12-356-4504
Swivel Knob Jeweler's Screwdriver Set

123564504
31.0010: RNCC: 3 | RNVC: 2
CTS-21: RNCC: 5 | RNVC: 2

28 Feb 2002

5120-12-124-5942
Hand Hammer

121245942
P10902: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5373

5120-12-151-6604
Montage-Und Nietvor

121516604
WKW9008-0112V1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-371-5245
Ausdrueckwerkzeug

123715245
2300264-264100.02.0: RNCC: 3 | RNVC: 2

12 Apr 2007

5120-12-324-7172
Drive Pin Punch

123247172
3 11 1 780: RNCC: 3 | RNVC: 2
30 111 780: RNCC: 5 | RNVC: 9

19 Mar 1991

5120-12-316-9804
Spanner Wrench

123169804
9108510009: RNCC: 3 | RNVC: 2
10851-01-00-00: RNCC: 5 | RNVC: 2

1 Mar 1989

5120-12-180-8666
Schluesseleinsatz

121808666
31VR30MM: RNCC: 3 | RNVC: 2
626376: RNCC: 5 | RNVC: 2

8 Oct 1979

5120-12-364-3462
Combination Box And Open End Wrench

123643462
40095050-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-385-2694
Flat Tip Screwdriver

123852694
50.000.154: RNCC: 3 | RNVC: 2

16 May 2011

5120-12-311-3627
Spanner Wrench

123113627
264-281: RNCC: 2 | RNVC: 2
264-281: RNCC: 3 | RNVC: 2
164194: RNCC: 5 | RNVC: 2

24 Aug 1987

5120-12-321-9225
Open End Wrench

123219225
3114-24: RNCC: 3 | RNVC: 2
790014577: RNCC: 5 | RNVC: 2
61280-24: RNCC: 5 | RNVC: 2
612800-24: RNCC: 5 | RNVC: 2

10 Jul 1990

5120-12-123-5774
Socket Wrench Socket

121235774
DIN3124-20X10L: RNCC: 2 | RNVC: 2
870-T20: RNCC: 3 | RNVC: 2
880TZ-20: RNCC: 3 | RNVC: 2
00.46.53.94: RNCC: 5 | RNVC: 2
09620: RNCC: 5 | RNVC: 2
2386110043: RNCC: 5 | RNVC: 2
880TZ20: RNCC: 5 | RNVC: 2
20X10LDIN3124: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-333-6703
Schluesseleinsatz

123336703
TK5120-044: RNCC: 2 | RNVC: 2
M4295-01: RNCC: 3 | RNVC: 2
920374.0000: RNCC: 5 | RNVC: 2
TK-BA35-5120-508: RNCC: 5 | RNVC: 9
TK-KG12-5120-679: RNCC: 5 | RNVC: 9

20 Jan 1994

5120-12-146-9904
Pliers

121469904
NM270: RNCC: 3 | RNVC: 2
NM270: RNCC: 5 | RNVC: 9
NM481-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-389-3873
Mounting Sleeve

123893873
260708: RNCC: 3 | RNVC: 2
94771-50: RNCC: 5 | RNVC: 2

29 Jun 2012

5120-12-700-7942
Einstel Schluessel

127007942
SCHLUESSEL-VENTIL-PUMPE-TLF32: RNCC: 2 | RNVC: 2

26 May 1993

5120-12-700-3678
Open End Wrench

127003678
51-083005054: RNCC: 2 | RNVC: 2

14 Apr 1992

5120-12-147-3205
Dorn

121473205
1X46914903: RNCC: 3 | RNVC: 2
V91490-3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-120-6598
Socket Wrench Socket

121206598
900A-1.1/8: RNCC: 3 | RNVC: 2
52A1 1-8: RNCC: 3 | RNVC: 2
50-6-1 1-8: RNCC: 3 | RNVC: 2
043286: RNCC: 5 | RNVC: 2
03430052: RNCC: 5 | RNVC: 2
00506339: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-147-6745
Socket Wrench

121476745
895-9: RNCC: 3 | RNVC: 2
200-9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-327-1116
C Clamp

123271116
10-636-900/3: RNCC: 2 | RNVC: 2
10-636-900/3: RNCC: 3 | RNVC: 2

3 Dec 1991

5120-12-380-0883
Socket Head Screw Key

123800883
598101-990000.022.0: RNCC: 2 | RNVC: 2
598101-990000.022.0: RNCC: 3 | RNVC: 2

24 Sep 2009

5120-12-338-6552
Hand Armament Subsystem Carrier

123386552
4900059-751610.003.0: RNCC: 3 | RNVC: 2

10 Aug 1995

5120-12-386-7686
Hand Hydraulic Jack

123867686
896-054-524: RNCC: 3 | RNVC: 2

28 Sep 2011

5120-12-168-5150
Welle

121685150
VG95211-ML-121685150: RNCC: 2 | RNVC: 2
160-88507-04: RNCC: 3 | RNVC: 2
160-88507-04: RNCC: 5 | RNVC: 9

18 Mar 1977

5120-12-174-9064
Pipe Wrench

121749064
573F002-225: RNCC: 3 | RNVC: 9

7 Aug 1978

5120-12-121-5371
Hand Rivet Set

121215371
NO PRIMARY REF 12-121-5371: RNCC: 3 | RNVC: 2
244E13: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-355-2875
Socket Wrench

123552875
265-1/4: RNCC: 3 | RNVC: 2
00558: RNCC: 5 | RNVC: 2

30 Oct 2001

5120-12-172-0922
Magnetic Retrieving Tool

121720922
2535K: RNCC: 3 | RNVC: 2
2-161: RNCC: 5 | RNVC: 2
106450: RNCC: 5 | RNVC: 2

19 Dec 1977

5120-12-192-4007
Spannschluessel

121924007
TS0-5: RNCC: 3 | RNVC: 2
TS0,5: RNCC: 3 | RNVC: 2

21 Apr 1982

5120-12-356-7430
Socket Head Screw Key Set

123567430
T4448: RNCC: 3 | RNVC: 2
967PKL/8: RNCC: 3 | RNVC: 2
212-260: RNCC: 3 | RNVC: 2
024240: RNCC: 5 | RNVC: 2

28 Mar 2002

5120-12-178-7335
Adjustable Wrench

121787335
571J402-22-42: RNCC: 3 | RNVC: 9
571J402-310: RNCC: 5 | RNVC: 9

14 May 1979

5120-12-347-3257
Seal Inserter

123473257
21-149: RNCC: 3 | RNVC: 2

26 Nov 1998

5120-12-390-3006
Torque Wrench Adapter

123903006
2001559-4,1: RNCC: 3 | RNVC: 2
2001559-4,1: RNCC: 5 | RNVC: 2

26 Oct 2012

5120-12-323-1128
Screwdriver Bit

123231128
601589001000: RNCC: 3 | RNVC: 2
2751: RNCC: 3 | RNVC: 2
2487170013: RNCC: 5 | RNVC: 2
990SLG10: RNCC: 5 | RNVC: 2

24 Oct 1990

5120-12-331-7745
Socket Wrench

123317745
300000-616000.00: RNCC: 3 | RNVC: 2

21 Jun 1993

5120-12-385-4152
Clamp Base Bench Vise

123854152
53.000.016: RNCC: 3 | RNVC: 2
53.000.016: RNCC: 5 | RNVC: 2

31 May 2011

5120-12-372-2436
Hand Vise

123722436
105-45041W22: RNCC: 3 | RNVC: 2

29 Jun 2007

5120-12-165-7997
Gasoline Field Range Fuel Jet Cleaner

26 Jun 1976

5120-12-372-0665
Spanner Wrench

123720665
0004571-801: RNCC: 2 | RNVC: 2
0004571-801: RNCC: 3 | RNVC: 2

14 Jun 2007

5120-12-380-6595
Ratchet Wrench

123806595
503.4808: RNCC: 3 | RNVC: 2

17 Nov 2009

5120-12-307-8506
Socket Wrench

123078506
74002-803: RNCC: 3 | RNVC: 2

1 Aug 1986

5120-12-326-0068
Mechanical Puller Step Plate

123260068
2500194-992400.002.0: RNCC: 2 | RNVC: 2
2500194-992400.002.0: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-369-1070
Seal Inserter

123691070
0986613247: RNCC: 3 | RNVC: 2

23 May 2006

5120-12-169-4083
Open End Wrench

121694083
DIN133-130: RNCC: 2 | RNVC: 2
2300-130: RNCC: 3 | RNVC: 2
130DIN133: RNCC: 5 | RNVC: 2

11 May 1977

5120-12-186-7567
Combination Box And Open End Wrench Set

121867567
205S 16AF: RNCC: 3 | RNVC: 2
00.31.10.06: RNCC: 5 | RNVC: 2
1952Z16: RNCC: 5 | RNVC: 9
603A16: RNCC: 5 | RNVC: 9
603A/16: RNCC: 5 | RNVC: 9
4415300018: RNCC: 5 | RNVC: 9
1952Z-16: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-171-6844
Mechanical Puller Attachment

121716844
220-3: RNCC: 3 | RNVC: 2
108139: RNCC: 5 | RNVC: 9
4520C: RNCC: 5 | RNVC: 9

3 Nov 1977

5120-12-192-7709
Open End Box Wrench

121927709
2769-3: RNCC: 3 | RNVC: 2
615589000300: RNCC: 5 | RNVC: 2
5713620001: RNCC: 5 | RNVC: 2
621589000300: RNCC: 5 | RNVC: 9

24 May 1982

5120-12-196-1529
Ausdrueckwerkzeug

121961529
VG95211-ML-121961529: RNCC: 2 | RNVC: 2
1.3-4044-407: RNCC: 3 | RNVC: 2
MAGERD 8693: RNCC: 5 | RNVC: 9

7 Jun 1983

5120-12-377-1569
Mechanical Puller Attachment

123771569
12613-0: RNCC: 3 | RNVC: 2
71030010: RNCC: 5 | RNVC: 2

15 Dec 2008

5120-12-368-4562
Socket Wrench Extension

123684562
2762-4-SONDERL.380 MM: RNCC: 3 | RNVC: 2

14 Mar 2006

5120-12-368-8713
Screw Extractor

123688713
260 007 3: RNCC: 3 | RNVC: 2
01.42.46.84: RNCC: 5 | RNVC: 2

3 May 2006

5120-12-190-9698
Montagevorrichtung

121909698
62063800: RNCC: 3 | RNVC: 2
6.20.638.0051.4: RNCC: 5 | RNVC: 9
62063800.514: RNCC: 5 | RNVC: 9
620 638 00: RNCC: 5 | RNVC: 9

29 Dec 1981

5120-12-308-8197
Socket Wrench Socket

123088197
2500179-992320.000.0: RNCC: 2 | RNVC: 2
2500179-992320.000.0: RNCC: 3 | RNVC: 2

18 Nov 1986

5120-12-386-9016
Screwdriver Bit

123869016
0.410.0784: RNCC: 3 | RNVC: 2
0.410.0784: RNCC: 5 | RNVC: 2

14 Oct 2011

5120-12-332-8456
Plier Clamp

123328456
5-161: RNCC: 3 | RNVC: 2

27 Sep 1993

5120-12-151-6718
Socket Wrench

121516718
40-390-064: RNCC: 3 | RNVC: 2
40390064: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-5431
Auspressvorrichtung

121265431
4015890035: RNCC: 3 | RNVC: 2
4015890035: RNCC: 3 | RNVC: 9
401589003500: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-318-2836
Schraubst Aufnahme

123182836
10215: RNCC: 3 | RNVC: 2
10215: RNCC: 5 | RNVC: 9

26 Jun 1989

5120-12-307-1279
Mechanical Puller Step Plate

123071279
23176-264282.01.0: RNCC: 2 | RNVC: 2
23176-264282.01.0: RNCC: 3 | RNVC: 2

14 May 1986

5120-12-343-8177
Schraubst Aufnahme

123438177
23176-262130.00.0: RNCC: 3 | RNVC: 2

31 Jul 1997

5120-12-170-2615

5120-12-316-9099
Hand Abrasive Wheel Dresser

123169099
59164005: RNCC: 3 | RNVC: 9

22 Feb 1989

5120-12-318-7380
Machinist's Scriber

123187380
1152A-LS2: RNCC: 3 | RNVC: 9

11 Aug 1989

5120-12-368-1008
Swivel Knob Jeweler's Screwdriver

123681008
47510007-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-123-7069

5120-12-196-2783
Hydraulisc Adapter

121962783
460-75: RNCC: 3 | RNVC: 2
00460-075-000: RNCC: 3 | RNVC: 2

22 Jun 1983

5120-12-327-2626
Aligning Punch

123272626
01TC33518: RNCC: 3 | RNVC: 2

2 Jan 1992

5120-12-022-7826

5120-12-324-7177
Pedal Adjustment Tool Compressor

123247177
3 11 1 750: RNCC: 3 | RNVC: 2
30 111 750: RNCC: 5 | RNVC: 9

19 Mar 1991

5120-12-302-6988
Box Wrench

123026988
N3408: RNCC: 3 | RNVC: 2
905.3.15.102.1: RNCC: 5 | RNVC: 2
4514: RNCC: 5 | RNVC: 9
5713650001: RNCC: 5 | RNVC: 9

23 Jan 1985

5120-12-305-7208

5120-12-317-8212
Socket Head Screw Key

123178212
6134001: RNCC: 3 | RNVC: 2

17 May 1989

5120-12-359-6141
Bearing And Bushing Inserter And Remover

123596141
T631P3003051: RNCC: 3 | RNVC: 2

21 Feb 2003

5120-12-126-6500
Communications Equipment Spring Adjuster

121266500
NO PRIMARY REF 12-126-6500: RNCC: 3 | RNVC: 2
5400E: RNCC: 5 | RNVC: 9
108410: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-309-5576
Bearing And Bushing Inserter

123095576
604-45.12.401-19E: RNCC: 3 | RNVC: 2

4 Feb 1987

5120-12-308-0269
Flat Tip Screwdriver

123080269
7372I-0,5X3X80: RNCC: 3 | RNVC: 2
134160: RNCC: 5 | RNVC: 2
7372I0.5X3X80: RNCC: 5 | RNVC: 2

21 Aug 1986

5120-12-390-5089
Drive Pin Punch Set

123905089
8758050: RNCC: 3 | RNVC: 2
116 D: RNCC: 5 | RNVC: 2
4010883875806: RNCC: 5 | RNVC: 2
8758050: RNCC: 5 | RNVC: 2
116 D: RNCC: 5 | RNVC: 2
4010883875806: RNCC: 5 | RNVC: 2

19 Nov 2012

5120-12-362-8629
Socket Wrench

123628629
61328608: RNCC: 3 | RNVC: 2
05028152001: RNCC: 3 | RNVC: 2
391-8: RNCC: 5 | RNVC: 2
028152: RNCC: 5 | RNVC: 9

7 Apr 2004

5120-12-381-4489
Socket Wrench Screwdriver Attachment

123814489
1707736: RNCC: 3 | RNVC: 2
1707736: RNCC: 5 | RNVC: 2
4010886839676: RNCC: 5 | RNVC: 2
IN 20 2,5: RNCC: 5 | RNVC: 2
4010886839676: RNCC: 5 | RNVC: 2
IN 20 2,5: RNCC: 5 | RNVC: 2
IN20-2,5: RNCC: 5 | RNVC: 9

18 Feb 2010

5120-12-312-1721
Lamp Extractor

123121721
6L.5898.007.00-A001: RNCC: 3 | RNVC: 2
1.90900.006: RNCC: 3 | RNVC: 2

1 Dec 1987

5120-12-165-0021
Fuehrungs- Gabel

121650021
VG95211-ML-121650021: RNCC: 2 | RNVC: 2
160-88507-03: RNCC: 3 | RNVC: 2
160-88507-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-149-5867
Socket Wrench

121495867
NO PRIMARY REF 12-149-5867: RNCC: 3 | RNVC: 2
105205: RNCC: 5 | RNVC: 9
1937M25: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-2561
Cross Tip Screwdriver

123122561
05017052001: RNCC: 3 | RNVC: 2
223-2X100: RNCC: 3 | RNVC: 2
17052: RNCC: 3 | RNVC: 9
918SPZ-2: RNCC: 5 | RNVC: 2
66880-2: RNCC: 5 | RNVC: 2
918S-2: RNCC: 5 | RNVC: 9

9 Dec 1987

5120-12-322-7679
Multiposition Vise

123227679
9-260: RNCC: 3 | RNVC: 2
07L3278: RNCC: 5 | RNVC: 2

19 Sep 1990

5120-12-389-3906
Socket Head Screw Key Set

123893906
625410-8: RNCC: 3 | RNVC: 2

29 Jun 2012

5120-12-309-4977
Hand Screw Starter

123094977
631-2: RNCC: 3 | RNVC: 2

29 Jan 1987

5120-12-021-2687

5120-12-322-6435
Joint Breaking Wedge

123226435
DKBE012: RNCC: 3 | RNVC: 2

10 Sep 1990

5120-12-368-8152
Torque Wrench

123688152
1.000.4887: RNCC: 3 | RNVC: 2

24 Apr 2006

5120-12-339-9226
Aligning Punch

123399226
2300232-992000.022.0: RNCC: 2 | RNVC: 2
2300232-992000.022.0: RNCC: 3 | RNVC: 2

1 Feb 1996

5120-12-126-4643

5120-12-368-8285
Pliers

123688285
65017160-TCS: RNCC: 3 | RNVC: 2

26 Apr 2006

5120-12-327-5953
Mechanical Puller Attachment

123275953
867012243: RNCC: 3 | RNVC: 2
4D0012243: RNCC: 5 | RNVC: 2
191012243: RNCC: 5 | RNVC: 9

5 Feb 1992

5120-12-158-7390
Hand Hammer

121587390
DIN6491-A100S: RNCC: 2 | RNVC: 2
A100SDIN6491: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-141-6618
Slip Joint Pliers

121416618
NO PRIMARY REF 12-141-6618: RNCC: 3 | RNVC: 2
106627: RNCC: 5 | RNVC: 9
2670: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-375-8741
Hand Terminal Crimping Tool

123758741
97 51 12: RNCC: 3 | RNVC: 2
3-0609: RNCC: 3 | RNVC: 2
437-5601: RNCC: 5 | RNVC: 2
4003773043188: RNCC: 5 | RNVC: 2
975112: RNCC: 5 | RNVC: 9

15 Jul 2008

5120-12-349-3926
Torque Wrench Adapter

123493926
2300211-991006.000.0: RNCC: 2 | RNVC: 2
2300211-991006.000.0: RNCC: 3 | RNVC: 2

9 Nov 1999

5120-12-340-2648
Aligning Punch

123402648
2300232-992000.019.0: RNCC: 2 | RNVC: 2
2300232-992000.019.0: RNCC: 3 | RNVC: 2

20 Mar 1996

5120-12-358-7516
Schraubendrehersatz

123587516
14900.5: RNCC: 3 | RNVC: 2

11 Nov 2002

5120-12-345-7914
Spanner Wrench

123457914
01.04764-4: RNCC: 3 | RNVC: 2
ZO01.04764: RNCC: 5 | RNVC: 9

24 Apr 1998

5120-12-363-8701
C Clamp

123638701
T670P5001101: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-350-3240
Mechanical Puller Attachment

123503240
5600023-990000.001.0: RNCC: 2 | RNVC: 2
5600023-990000.001.0: RNCC: 3 | RNVC: 2
12004854: RNCC: 3 | RNVC: 2

15 Mar 2000

5120-12-316-7648
Socket Wrench Set

123167648
D19 WMU-2: RNCC: 3 | RNVC: 9

9 Feb 1989

5120-12-378-1970
Combination Box And Open End Wrench

123781970
6004820: RNCC: 3 | RNVC: 2
4010886600481: RNCC: 5 | RNVC: 2
4010886600481: RNCC: 5 | RNVC: 2
6004820: RNCC: 5 | RNVC: 2
1B75: RNCC: 5 | RNVC: 2
1B75: RNCC: 5 | RNVC: 2

18 Mar 2009

5120-12-044-6031

5120-12-335-9631
Seal Inserter

123359631
0851 7705: RNCC: 3 | RNVC: 2
8517705: RNCC: 5 | RNVC: 2

6 Oct 1994

5120-12-313-7911
Ratchet Wrench

123137911
31KR17: RNCC: 3 | RNVC: 2
625 418: RNCC: 5 | RNVC: 2

5 May 1988

5120-12-126-3064
Flat Tip Screwdriver

121263064
336A10X25: RNCC: 3 | RNVC: 9
336A10X25: RNCC: 5 | RNVC: 2
336A10X25: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-5876
Multiposition Vise

121295876
200 051: RNCC: 3 | RNVC: 2
200051: RNCC: 5 | RNVC: 2
21002: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-191-1886
Mechanical Puller Forcing Screw

121911886
1X56136965-2: RNCC: 3 | RNVC: 2

18 Jan 1982

5120-12-140-1145

5120-12-041-2656

5120-12-126-3385
Drive Pin Punch

121263385
NO PRIMARY REF 12-126-3385: RNCC: 3 | RNVC: 2
1891-1MM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-144-0778
Schluessel

121440778
5800494-1000-03: RNCC: 2 | RNVC: 2
5800494-1000-03: RNCC: 3 | RNVC: 2
5800494-1000-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-2990
Machinist's Vise

121262990
51035030: RNCC: 3 | RNVC: 2
3213-80: RNCC: 5 | RNVC: 9
DIN5115-C80: RNCC: 5 | RNVC: 9
C80DIN5115: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-332-2568
Socket Wrench Adapter

123322568
480-7345-14-00-00-17: RNCC: 3 | RNVC: 2
480/7345-14-00-00/17: RNCC: 5 | RNVC: 2

27 Jul 1993

5120-12-157-6771
Kabelschuhh Matrize

121576771
B35WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5299

5120-12-364-5652
Open End Box Wrench

123645652
41081113-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-366-8426
Torque Wrench

123668426
TW1460R: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-12-139-3098

5120-12-174-0405
Open End Wrench

121740405
15095-2: RNCC: 3 | RNVC: 2

31 May 1978

5120-12-171-3454
Flat Tip Screwdriver

121713454
8030N1X6X25: RNCC: 3 | RNVC: 9
6400002: RNCC: 5 | RNVC: 2

30 Sep 1977

5120-12-322-4068
Box Wrench

123224068
C25-M18X19: RNCC: 3 | RNVC: 2
148075: RNCC: 5 | RNVC: 2

20 Aug 1990

5120-12-133-4650

5120-12-366-6784
Dreh Haltewerkzeug

123666784
5175752: RNCC: 3 | RNVC: 2

23 May 2005

5120-12-357-7111
Pliers

123577111
3542115: RNCC: 3 | RNVC: 2

15 Jul 2002

5120-12-136-4042

5120-12-168-6376

5120-12-347-4365
Spanner Wrench

123474365
97.0056.8474: RNCC: 3 | RNVC: 2

10 Dec 1998

5120-12-140-6418
Socket Wrench Handle Bar

121406418
C20407-ZA-13: RNCC: 3 | RNVC: 2
C20407-Z7-A13: RNCC: 5 | RNVC: 2
C20407A7A13: RNCC: 5 | RNVC: 2
C20407Z7A13: RNCC: 5 | RNVC: 2
TFS70-02377: RNCC: 5 | RNVC: 9
TWZ7N: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-352-1907
Socket Head Screw Key

123521907
TL5120-0132-I3: RNCC: 2 | RNVC: 2
10766-T8: RNCC: 3 | RNVC: 2
500-080-08: RNCC: 3 | RNVC: 2
00.43.01.33: RNCC: 5 | RNVC: 2
43220008: RNCC: 5 | RNVC: 2

24 Oct 2000

5120-12-372-0499
Socket Wrench Screwdriver Attachment

123720499
DIN7422-24-25: RNCC: 2 | RNVC: 2
IN21-24: RNCC: 3 | RNVC: 2
6181440: RNCC: 5 | RNVC: 2

14 Jun 2007

5120-12-133-0446
Drive Pin Punch

121330446
548 012: RNCC: 3 | RNVC: 2
574D008-12: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-041-5745

5120-12-325-0814
Spanner Wrench

123250814
52820-W17: RNCC: 3 | RNVC: 2

30 Apr 1991

5120-12-123-5415

5120-12-310-5129
Ku Montierwerkzeug

123105129
VW 547: RNCC: 3 | RNVC: 2
VW 547: RNCC: 3 | RNVC: 2
VW 547: RNCC: 3 | RNVC: 2
90.3.24417: RNCC: 3 | RNVC: 2
VW 547: RNCC: 5 | RNVC: 2

27 May 1987

5120-12-310-5515
Flat Tip Screwdriver

123105515
P-896326-401: RNCC: 3 | RNVC: 2
P896326-401: RNCC: 5 | RNVC: 2

1 Jun 1987

5120-12-156-1528
Drive Pin Punch

121561528
NM350-11: RNCC: 3 | RNVC: 2
NM350-11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-8378
Wrench Extension Handle

123818378
BW-MXT3-ALC-M30: RNCC: 3 | RNVC: 2

8 Apr 2010

5120-12-385-5267
Bearing And Bushing Inserter And Remover

123855267
050.099: RNCC: 3 | RNVC: 2
D11.49021-0408 TEIL 050.099: RNCC: 5 | RNVC: 2

14 Jun 2011

5120-12-300-3530
Bearing And Bushing Inserter

123003530
406589033100: RNCC: 3 | RNVC: 2

26 Jul 1984

5120-12-326-0178
Mechanical Puller

123260178
115589203300: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-361-1211
Mechanical Puller

123611211
4931-0020-000000: RNCC: 3 | RNVC: 2

26 Aug 2003

5120-12-333-3473
Socket Wrench Adapter-Extension

123333473
8100-20: RNCC: 3 | RNVC: 2

1 Jan 2000

5120-12-325-3335
Ratchet Wrench

123253335
NO PRIMARY REF 12-325-3335: RNCC: 3 | RNVC: 2
1322Z5/8: RNCC: 5 | RNVC: 9
174289: RNCC: 5 | RNVC: 9

27 May 1991

5120-12-367-6028
Socket Head Screw Key

123676028
400-020-08: RNCC: 3 | RNVC: 2
230/686/1: RNCC: 5 | RNVC: 2

8 Sep 2005

5120-12-172-0900
Pliers

121720900
70150-1040-0-000-06: RNCC: 3 | RNVC: 2

19 Dec 1977

5120-12-384-3197
Mechanical Puller Adapter

123843197
F6780562: RNCC: 3 | RNVC: 2

11 Feb 2011

5120-12-364-5662
Socket Wrench Crowfoot Attachment

123645662
02200018-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-316-0604
Flat Tip Screwdriver

123160604
01 90 901 016: RNCC: 3 | RNVC: 2
4806506: RNCC: 5 | RNVC: 9

17 Dec 1988

5120-12-368-2595
Socket Wrench Socket

123682595
02010020-TCS: RNCC: 3 | RNVC: 2

18 Jan 2006

5120-12-127-0430
Socket Wrench Socket

121270430
DG30-17: RNCC: 3 | RNVC: 2
47-17: RNCC: 3 | RNVC: 2
02040017: RNCC: 5 | RNVC: 2
109515: RNCC: 5 | RNVC: 9
7410DM17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-349-0145
Fixed Open End Wrench Set

123490145
VDE984-9T: RNCC: 3 | RNVC: 2

14 Sep 1999

5120-12-163-8894
Dorn

121638894
VG95211-ML-121638894: RNCC: 2 | RNVC: 2
1X56 131 407: RNCC: 3 | RNVC: 2
1X56131407: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-170-8575
Schluessel

121708575
NO PRIMARY REF 12-170-8575: RNCC: 3 | RNVC: 2
242891: RNCC: 5 | RNVC: 2
242891: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-135-2825
Stud Inserter And Remover

121352825
NO PRIMARY REF 12-135-2825: RNCC: 3 | RNVC: 2
109615: RNCC: 5 | RNVC: 9
7493: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-158-5701
Open End Wrench

121585701
DS3114-14: RNCC: 3 | RNVC: 2
667226: RNCC: 5 | RNVC: 2
586-2830: RNCC: 5 | RNVC: 2
586-2830: RNCC: 5 | RNVC: 2
DS3114-115: RNCC: 5 | RNVC: 9
586-2830: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-1525
Drive Pin Punch

121561525
NM350-02: RNCC: 3 | RNVC: 2
NM350-02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-191-9405
Seal Inserter

121919405
66606800: RNCC: 3 | RNVC: 2
E671-M3: RNCC: 5 | RNVC: 2

16 Mar 1982

5120-12-181-2146
Ratchet Screwdriver

121812146
13141: RNCC: 3 | RNVC: 9
2888: RNCC: 5 | RNVC: 9

31 Oct 1979

5120-12-362-6016
Aufdrueckwerkzeug

123626016
2500261-993250.000.0: RNCC: 2 | RNVC: 2
2500261-993250.000.0: RNCC: 3 | RNVC: 2

11 Mar 2004

5120-12-163-6600
Einbauwerkzeug

121636600
26-21C1051P011: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-163-6647
Ein- Und Ausbauwerk

121636647
30-79350-1140: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-387-1926
Rotating Members Aligning Tool

123871926
F6786394: RNCC: 3 | RNVC: 2

14 Nov 2011

5120-12-391-2957
Pole Extension

123912957
0177500000: RNCC: 3 | RNVC: 2

4 Mar 2013

5120-12-126-2978
Communications Equipment Spring Adjuster

121262978
FGWZ168B: RNCC: 3 | RNVC: 2
10025: RNCC: 5 | RNVC: 2
10025: RNCC: 5 | RNVC: 9
3019: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-149-5494
Kolbenr Druckstift

121495494
TS526: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-372-4747
Pliers

123724747
431014: RNCC: 3 | RNVC: 2

19 Jul 2007

5120-12-172-2996
Compound Melting Kettle

121722996
8505: RNCC: 3 | RNVC: 9
2457: RNCC: 5 | RNVC: 9

10 Jan 1978

5120-12-385-6194
Mounting Sleeve

123856194
F6345858: RNCC: 3 | RNVC: 2

22 Jun 2011

5120-12-388-2729
Torque Wrench Adapter

123882729
000589710300: RNCC: 3 | RNVC: 2

7 Mar 2012

5120-12-322-4065
Box Wrench

123224065
C25-M12X13: RNCC: 3 | RNVC: 2
148806: RNCC: 5 | RNVC: 2

20 Aug 1990

5120-12-339-2174
Pliers

123392174
3542115ESD: RNCC: 3 | RNVC: 2
024866: RNCC: 5 | RNVC: 2

25 Oct 1995

5120-12-337-9673
Open End Wrench

123379673
52.3108.011.00: RNCC: 2 | RNVC: 2
52.3108.011.00: RNCC: 3 | RNVC: 2

8 May 1995

5120-12-338-0542
Gl Montierwerkzeug

123380542
7513130400: RNCC: 3 | RNVC: 2

16 May 1995

5120-12-182-4205
Druckstueck

121824205
VW474: RNCC: 3 | RNVC: 9

30 Jan 1980

5120-12-364-9368
Pliers

123649368
T3872D-120: RNCC: 3 | RNVC: 2

17 Nov 2004

5120-12-363-8707
Bearing And Bushing Inserter And Remover

123638707
T670P5001107: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-349-4022
Eindrueckwerkzeug

123494022
0986612064: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-364-2840
Socket Head Screw Key

123642840
05023115001: RNCC: 3 | RNVC: 2
354-4,0X75: RNCC: 5 | RNVC: 2
023115: RNCC: 5 | RNVC: 9

7 Sep 2004

5120-12-156-7369
Socket Wrench

121567369
2-3903: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-348-6094
Flat Tip Screwdriver

123486094
663000-2,5: RNCC: 3 | RNVC: 2
66360-2,5: RNCC: 5 | RNVC: 9

26 Jul 1999

5120-12-327-6356
Offset Screwdriver

123276356
450901-3845: RNCC: 3 | RNVC: 2

11 Feb 1992

5120-12-172-3932
Spanner Wrench

121723932
VG95211-ML-121723932: RNCC: 2 | RNVC: 2
30-79350-5168: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-12-120-6214

5120-12-091-6439

5120-12-362-5459
Hand Terminal Crimping Tool

123625459
210761: RNCC: 3 | RNVC: 2

5 Mar 2004

5120-12-176-6870
Socket Wrench Handle Bar

121766870
000589011302: RNCC: 3 | RNVC: 2

13 Dec 1978

5120-12-145-0305
Spanner Wrench

121450305
T1063: RNCC: 3 | RNVC: 2
T05T1063: RNCC: 5 | RNVC: 2
T05T1063: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-336-0105
Hand Blind Riveter

123360105
770200-HN35: RNCC: 3 | RNVC: 2
77 020-HN35: RNCC: 5 | RNVC: 2

12 Oct 1994

5120-12-176-2814
Aligning Punch

121762814
403589026300: RNCC: 3 | RNVC: 2
403 589 02 63 00: RNCC: 5 | RNVC: 2

23 Nov 1978

5120-12-129-1373

5120-12-371-4175
Mechanical Puller

123714175
VM62481: RNCC: 3 | RNVC: 2

27 Mar 2007

5120-12-140-8042
Basin Wrench

121408042
149005: RNCC: 3 | RNVC: 2
149: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-328-5982
Rack Bar Jack

123285982
1350.10.10.27: RNCC: 3 | RNVC: 2

5 Jun 1992

5120-12-378-7743
Electrical Contact Inserter And Remover

123787743
VG95236T04F0001: RNCC: 2 | RNVC: 2

12 May 2009

5120-12-373-9018
Socket Wrench Socket

123739018
4550-4: RNCC: 3 | RNVC: 2
80.99603-0310: RNCC: 5 | RNVC: 2
80996030310: RNCC: 5 | RNVC: 2
4000896104291: RNCC: 5 | RNVC: 2
MAN80.99603-0310: RNCC: 5 | RNVC: 2

17 Dec 2007

5120-12-314-6234
Montierwerk Huelse

123146234
F11.49044-0934: RNCC: 3 | RNVC: 2
11.49044-0934: RNCC: 5 | RNVC: 2
11.49044-0934: RNCC: 5 | RNVC: 2

22 Jul 1988

5120-12-345-4375
Hand Terminal Crimping Tool

123454375
WZ27-12-13: RNCC: 3 | RNVC: 2

16 Mar 1998

5120-12-301-2089
Brechstan Aufnahme

123012089
23114-4134-00: RNCC: 2 | RNVC: 2
23114-4134.00: RNCC: 2 | RNVC: 2
23114-4134.00: RNCC: 3 | RNVC: 2
23114-4134.00: RNCC: 5 | RNVC: 2
23114-4134-00: RNCC: 5 | RNVC: 2
23114-4134.00: RNCC: 5 | RNVC: 9
23114-4134-00: RNCC: 5 | RNVC: 9

27 Sep 1984

5120-12-345-5147
Hand Hammer

123455147
10970-3/4: RNCC: 3 | RNVC: 2
70 12 00 06: RNCC: 5 | RNVC: 2

26 Mar 1998

5120-12-336-5065
Seal Inserter And Remover

123365065
0852 2456: RNCC: 3 | RNVC: 2
8522456: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-165-5340
Ph Schraubendreher

121655340
8045LVDE: RNCC: 3 | RNVC: 2
1424: RNCC: 3 | RNVC: 2
150916: RNCC: 5 | RNVC: 2
14240000: RNCC: 5 | RNVC: 2

25 May 1976

5120-12-330-0168
Schluessel

123300168
9689160168: RNCC: 3 | RNVC: 2
91729486: RNCC: 5 | RNVC: 2

22 Oct 1992

5120-12-392-6757
Rotating Members Aligning Tool

123926757
CTP40920G001: RNCC: 3 | RNVC: 2

27 Jun 2013

5120-12-147-1094
Spanner Wrench

121471094
6192911: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-308-0938
Torque Wrench

123080938
753-02: RNCC: 3 | RNVC: 2
768014: RNCC: 5 | RNVC: 9
753-02: RNCC: 5 | RNVC: 9
768014: RNCC: 5 | RNVC: 9

1 Sep 1986

5120-12-126-1526
Spatula

121261526
DIN7216-A80: RNCC: 2 | RNVC: 2
A80DIN7216: RNCC: 5 | RNVC: 2
DIN7216A80: RNCC: 5 | RNVC: 9
641A202-80: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-369-7240
Socket Wrench

123697240
110500: RNCC: 3 | RNVC: 2
110500: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-385-4042
Bearing And Bushing Inserter And Remover

123854042
F0096532: RNCC: 3 | RNVC: 2

31 May 2011

5120-12-139-3114
Mechanical Puller

121393114
8205891333: RNCC: 3 | RNVC: 2
001M00100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-388-5090
Pliers Set

123885090
800025: RNCC: 3 | RNVC: 2

28 Mar 2012

5120-12-326-5326
Combination Box And Open End Wrench

123265326
4W2555-A: RNCC: 3 | RNVC: 2
4W2555-A: RNCC: 5 | RNVC: 9

1 Oct 1991

5120-12-308-5538
Mechanical Puller

123085538
2500179-993310.000.0: RNCC: 2 | RNVC: 2
2500179-993310.000.0: RNCC: 3 | RNVC: 2

22 Oct 1986

5120-12-357-7730
W Spannvorrichtung

123577730
318: RNCC: 3 | RNVC: 2

22 Jul 2002

5120-12-344-6269
Box Wrench

123446269
03.339.05.04.0: RNCC: 3 | RNVC: 2

18 Nov 1997

5120-12-381-4088
Spatula

123814088
4317784093279: RNCC: 3 | RNVC: 2

10 Feb 2010

5120-12-335-4442
Mechanical Puller

123354442
0852 4129: RNCC: 3 | RNVC: 2
8524129: RNCC: 5 | RNVC: 2

18 Aug 1994

5120-12-094-0368

5120-12-168-5281
Aufsteck- Huelse

121685281
2776010000: RNCC: 3 | RNVC: 2

18 Mar 1977

5120-12-142-0293

5120-12-166-6658
Box Wrench

121666658
100429-90000-01-0: RNCC: 2 | RNVC: 2
100429-90000-01-0: RNCC: 3 | RNVC: 2
100429-90000-01-0: RNCC: 5 | RNVC: 9

5 Oct 1976

5120-12-367-8510
Electronic Equipment Alignment Tool

123678510
270-2,6X15: RNCC: 3 | RNVC: 2
021689: RNCC: 5 | RNVC: 2

24 Oct 2005

5120-12-360-1957
Lifting Pneumatic Bag

123601957
416.1830: RNCC: 3 | RNVC: 2

16 Apr 2003

5120-12-339-4909
Fuse Puller

123394909
81668180002: RNCC: 3 | RNVC: 2
16756562699: RNCC: 5 | RNVC: 2

28 Nov 1995

5120-12-122-6817
Box Wrench

121226817
8806: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-371-1566
Montierhuelse

123711566
352345: RNCC: 3 | RNVC: 2

21 Feb 2007

5120-12-364-5665
Socket Wrench Crowfoot Attachment

123645665
02200021-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-350-2718
Bl Ausbeulwerkzeug

123502718
066R: RNCC: 3 | RNVC: 2

9 Mar 2000

5120-12-010-9673

5120-12-179-7308
Stuetzrohr

121797308
5900063-212000.00: RNCC: 2 | RNVC: 2
5900063-212000.00: RNCC: 3 | RNVC: 2
5900063-212000-00: RNCC: 5 | RNVC: 2

25 Jul 1979

5120-12-174-3548
Schutz- Ring

121743548
7882614: RNCC: 3 | RNVC: 2
1000025-855000-01: RNCC: 5 | RNVC: 2
1000025-855000.01: RNCC: 5 | RNVC: 2
7882-614: RNCC: 5 | RNVC: 2

26 Jun 1978

5120-12-311-7796
Schnel Klemmensatz

123117796
TL5120-0096: RNCC: 2 | RNVC: 2
DIN5117: RNCC: 5 | RNVC: 1
TK5120-038: RNCC: 5 | RNVC: 9
TK-KG55-5120-598: RNCC: 5 | RNVC: 9
5120-01356: RNCC: 6 | RNVC: 9

15 Oct 1987

5120-12-327-7365
Spanner Wrench

123277365
R-4-26340: RNCC: 3 | RNVC: 2
R-1-2633REP22: RNCC: 5 | RNVC: 2

25 Feb 1992

5120-12-317-5198
Zange Einsatz

123175198
F18800: RNCC: 3 | RNVC: 2

14 Apr 1989

5120-12-314-9265
Screw Thread Insert Inserter

123149265
6100120.00: RNCC: 3 | RNVC: 2
6100120: RNCC: 5 | RNVC: 2
601120: RNCC: 5 | RNVC: 2

27 Aug 1988

5120-12-194-4040
Bearing And Bushing Inserter

121944040
KDAL5479: RNCC: 3 | RNVC: 2
EFAL991683120020: RNCC: 5 | RNVC: 2

28 Oct 1982

5120-12-323-2309
Socket Wrench Socket

123232309
50: RNCC: 3 | RNVC: 2
636169: RNCC: 5 | RNVC: 2

5 Nov 1990

5120-12-168-5893
Spanner Wrench

121685893
IR915048: RNCC: 3 | RNVC: 2

23 Mar 1977

5120-12-146-2968
Eindrueck- Huelse

121462968
4015890961: RNCC: 3 | RNVC: 2
401589096100: RNCC: 5 | RNVC: 2
4015890961: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-353-2085
Socket Wrench Socket

123532085
CBD45074P02: RNCC: 3 | RNVC: 2

12 Feb 2001

5120-12-195-1802
Open End Wrench

121951802
DIN7446-12: RNCC: 2 | RNVC: 2
980012: RNCC: 3 | RNVC: 2
613330VDE12: RNCC: 3 | RNVC: 2
613330VDE12: RNCC: 3 | RNVC: 2
61333VDE12: RNCC: 5 | RNVC: 2
61333VDE12: RNCC: 5 | RNVC: 2
151412: RNCC: 5 | RNVC: 2
1953VDE12: RNCC: 5 | RNVC: 9
9507-12: RNCC: 5 | RNVC: 9

20 Jan 1983

5120-12-333-6643
Wrench Kit

123336643
637.3896.00: RNCC: 3 | RNVC: 2

19 Jan 1994

5120-12-196-7380
Seal Inserter

121967380
1X56119916: RNCC: 3 | RNVC: 2
0535659: RNCC: 5 | RNVC: 2
535659: RNCC: 5 | RNVC: 9

9 Aug 1983

5120-12-021-2681

5120-12-181-9737
Druckstempel

121819737
VW411: RNCC: 3 | RNVC: 9

28 Dec 1979

5120-12-153-5234
Socket Wrench Attachment Universal Joint

121535234
NM299-03: RNCC: 3 | RNVC: 2
586-2583: RNCC: 5 | RNVC: 2
561589021500: RNCC: 5 | RNVC: 2
586-2583: RNCC: 5 | RNVC: 2
5615890215/00: RNCC: 5 | RNVC: 2
586-2583: RNCC: 5 | RNVC: 9
NM299-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-0373
Elektron Auszieher

123300373
B.PEZ1.0000.00: RNCC: 3 | RNVC: 2
TW2000-24: RNCC: 3 | RNVC: 2
TW2000-24: RNCC: 5 | RNVC: 2

24 Oct 1992

5120-12-155-9517
Swivel Knob Jeweler's Screwdriver

121559517
NM173-03: RNCC: 3 | RNVC: 2
JD5120-12-155-9517: RNCC: 5 | RNVC: 2
NM173-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-356-4505
Swivel Knob Jeweler's Screwdriver Set

123564505
31.0790: RNCC: 3 | RNVC: 2
TS-1800: RNCC: 5 | RNVC: 2

28 Feb 2002

5120-12-180-1615
Screwdriver Bit

121801615
991-10: RNCC: 3 | RNVC: 2
3041 10: RNCC: 3 | RNVC: 2
54CV10: RNCC: 3 | RNVC: 2
50-34-10: RNCC: 3 | RNVC: 2
F30022020: RNCC: 5 | RNVC: 2
03090010: RNCC: 5 | RNVC: 2
5069615: RNCC: 5 | RNVC: 2
00050340483: RNCC: 5 | RNVC: 2
698-420-0030: RNCC: 5 | RNVC: 2
2487180011: RNCC: 5 | RNVC: 9

27 Aug 1979

5120-12-351-9579
Socket Head Screw Key

123519579
ISO2936-27: RNCC: 2 | RNVC: 2

20 Sep 2000

5120-12-121-5378
Blacksmith's Vise

121215378
NO PRIMARY REF 12-121-5378: RNCC: 3 | RNVC: 2
3203-150: RNCC: 5 | RNVC: 9
150DIN5114: RNCC: 5 | RNVC: 9
576A006-150: RNCC: 5 | RNVC: 9
DIN5114-150: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-376-7790
Spanner Wrench

123767790
5075890007/00: RNCC: 3 | RNVC: 2

6 Nov 2008

5120-12-179-9708
Buchse

121799708
143200-2: RNCC: 3 | RNVC: 2
80.99635-0007: RNCC: 5 | RNVC: 2
80996350007: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-175-3813
Spanner Wrench

121753813
DIN3116-B35: RNCC: 2 | RNVC: 2
B35DIN3116: RNCC: 5 | RNVC: 2
217-467: RNCC: 5 | RNVC: 9
932-217-467: RNCC: 5 | RNVC: 9
1607950005: RNCC: 5 | RNVC: 9

13 Sep 1978

5120-12-123-5629
Socket Wrench

121235629
NO PRIMARY REF 12-123-5629: RNCC: 3 | RNVC: 2
01380: RNCC: 5 | RNVC: 9
430-22X24: RNCC: 5 | RNVC: 9
70-22X24: RNCC: 5 | RNVC: 9
213403: RNCC: 5 | RNVC: 9
27-22X24: RNCC: 5 | RNVC: 9
27-22X24: RNCC: 5 | RNVC: 9
070095: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-370-3760
Socket Head Screw Key Set

123703760
10767A/13: RNCC: 3 | RNVC: 2
96435702: RNCC: 5 | RNVC: 2
950L/13SZ: RNCC: 5 | RNVC: 9

31 Oct 2006

5120-12-393-8560
Screwdriver Bit

123938560
05059860001: RNCC: 3 | RNVC: 2
851/4TH-PH2: RNCC: 5 | RNVC: 2

16 Oct 2013

5120-12-135-2337
Open End Wrench

121352337
60-10: RNCC: 3 | RNVC: 2
1930BM10X10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-345-7591
Socket Wrench Socket

123457591
422589010900: RNCC: 3 | RNVC: 2
4225890109/00: RNCC: 5 | RNVC: 2
422 589 01 09 00: RNCC: 5 | RNVC: 2

22 Apr 1998

5120-12-343-8674
Combination Box And Open End Box Wrench

123438674
VG95211-ML-123438674: RNCC: 2 | RNVC: 2
30-79350-6127: RNCC: 3 | RNVC: 2

7 Aug 1997

5120-12-339-5714
Piston Ring Compressor

123395714
130600: RNCC: 3 | RNVC: 2
698-759-0000: RNCC: 5 | RNVC: 2

6 Dec 1995

5120-12-196-1482
Mechanical Puller

121961482
EV4-840: RNCC: 3 | RNVC: 2
EV4-840: RNCC: 5 | RNVC: 9

7 Jun 1983

5120-12-144-2098
Durchdrehvorrichtun

121442098
838589026900: RNCC: 3 | RNVC: 2
8385890269: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-311-8228
Preformed Packing Inserter

123118228
16719: RNCC: 3 | RNVC: 2
9040244: RNCC: 5 | RNVC: 2

20 Oct 1987

5120-12-188-8359
Griff

121888359
AWN187-N2: RNCC: 3 | RNVC: 2
AWN187-N2: RNCC: 3 | RNVC: 2
AWN187-N2: RNCC: 5 | RNVC: 9

3 Aug 1981

5120-12-305-9662
Open End Wrench

123059662
4200146: RNCC: 3 | RNVC: 2
250008: RNCC: 5 | RNVC: 2
4200146: RNCC: 5 | RNVC: 2

14 Jan 1986

5120-12-181-9547
Montagewerkzeug

121819547
01TC30062: RNCC: 3 | RNVC: 2

28 Dec 1979

5120-12-340-9739
Socket Head Screw Key

123409739
1000-23: RNCC: 3 | RNVC: 2
12785: RNCC: 5 | RNVC: 2

11 Jul 1996

5120-12-363-9702
Bearing And Bushing Inserter

123639702
T671P5002240: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-146-5907
Spanner Wrench

121465907
23182-9754: RNCC: 2 | RNVC: 2
23182-9754: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-147-3669
Schluessel

121473669
WZ70: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-143-3039
Schluessel

121433039
RELWZ43A: RNCC: 3 | RNVC: 2
RELWZ43A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-1363

5120-12-335-0115
Digging Pick

123350115
DIN20109-2,5: RNCC: 2 | RNVC: 2
WRSOM0528: RNCC: 3 | RNVC: 2

11 Jul 1994

5120-12-365-7816
Craftsman's Tweezers

123657816
T2330: RNCC: 3 | RNVC: 2

2 Feb 2005

5120-12-362-4715
Cross Tip Screwdriver

123624715
54.0084.960.36: RNCC: 3 | RNVC: 2
8078VDE-2: RNCC: 5 | RNVC: 2

27 Feb 2004

5120-12-126-2537
Drive Pin Punch

121262537
748A-2: RNCC: 3 | RNVC: 2
4922980001: RNCC: 5 | RNVC: 2
3639G: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-351-8926
Face Spanner Wrench Socket

123518926
5870 401 136: RNCC: 3 | RNVC: 2

11 Sep 2000

5120-12-173-4344
Spanner Wrench

121734344
532008G16W3: RNCC: 3 | RNVC: 2
532008G16W3: RNCC: 5 | RNVC: 2
532008G16W3: RNCC: 5 | RNVC: 9
532008G16W3: RNCC: 5 | RNVC: 9

14 Apr 1978

5120-12-309-7139
Lamp Extractor

123097139
52716-001: RNCC: 3 | RNVC: 2
52 716-001: RNCC: 5 | RNVC: 9

18 Feb 1987

5120-12-126-4670
Electronic Equipment Alignment Tool

121264670
NO PRIMARY REF 12-126-4670: RNCC: 3 | RNVC: 2
108680: RNCC: 5 | RNVC: 9
5503: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-325-1449
Plug Electrical Connector Extractor

123251449
720.30-16-00-00-000: RNCC: 3 | RNVC: 2

7 May 1991

5120-12-311-2613
Spaten Aufnahme

123112613
2300005-4150.01: RNCC: 2 | RNVC: 2
2300005-4150-01: RNCC: 3 | RNVC: 2
2300005-4150-01: RNCC: 5 | RNVC: 2
2300005-4150-01: RNCC: 5 | RNVC: 9

11 Aug 1987

5120-12-123-5130
Open End Wrench

121235130
100-27X29: RNCC: 3 | RNVC: 2
6-27X29: RNCC: 3 | RNVC: 2
606782: RNCC: 5 | RNVC: 2
00.24.61.36: RNCC: 5 | RNVC: 2
02420: RNCC: 5 | RNVC: 9
450-27X29: RNCC: 5 | RNVC: 9
450V27X29: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-7299
Abdrueckvorrichtung

121817299
1X56136684: RNCC: 3 | RNVC: 2

12 Dec 1979

5120-12-133-4658

5120-12-140-1952

5120-12-137-6761
Torque Wrench

121376761
VM58448: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5635
Socket Wrench

121235635
70-27X32: RNCC: 3 | RNVC: 2
430-27X32: RNCC: 5 | RNVC: 9
01410: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-308-6496
Socket Wrench

123086496
251186: RNCC: 3 | RNVC: 2
251186: RNCC: 3 | RNVC: 9
00251186.4.0: RNCC: 5 | RNVC: 2
00251186.4.0: RNCC: 5 | RNVC: 9

31 Oct 1986

5120-12-330-9038
Schlu Aufnahmeteil

123309038
480-7397-26-12-00: RNCC: 3 | RNVC: 2

24 Feb 1993

5120-12-312-8840
Hand Hammer

123128840
5140.C-3: RNCC: 3 | RNVC: 2
55814-1-0: RNCC: 5 | RNVC: 2

16 Feb 1988

5120-12-300-9816
Drill Drift

123009816
08555: RNCC: 3 | RNVC: 9
60234/2: RNCC: 3 | RNVC: 9

14 Sep 1984

5120-12-375-7486
Craftsman's Tweezers

123757486
5-035: RNCC: 3 | RNVC: 2

1 Jul 2008

5120-12-120-5631
Socket Wrench

121205631
0005812001: RNCC: 3 | RNVC: 2
10531031-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-2963
Face Spanner Wrench Socket

121462963
4015890507: RNCC: 3 | RNVC: 2
401589050700: RNCC: 5 | RNVC: 2
4015890507: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-355-2126
Inspection Mirror

123552126
12921-60: RNCC: 3 | RNVC: 2
77402060: RNCC: 5 | RNVC: 2

23 Oct 2001

5120-12-021-5716

5120-12-121-2841
Blacksmith's Anvil

121212841
NO PRIMARY REF 12-121-2841: RNCC: 3 | RNVC: 2
2856-80-84: RNCC: 5 | RNVC: 9
10-1H0RN: RNCC: 5 | RNVC: 9
5120-01070: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-311-1293
Wrench Kit

123111293
NO PRIMARY REF 12-311-1293: RNCC: 3 | RNVC: 2
63 760: RNCC: 5 | RNVC: 9
876K: RNCC: 5 | RNVC: 9
87K: RNCC: 5 | RNVC: 9

29 Jul 1987

5120-12-331-3543
Torque Wrench

123313543
NO PRIMARY REF 12-331-3543: RNCC: 3 | RNVC: 2
180877: RNCC: 5 | RNVC: 9
8952FV: RNCC: 5 | RNVC: 9
5120-01620: RNCC: 6 | RNVC: 9

27 Apr 1993

5120-12-369-2477
Socket Head Screw Key Set

123692477
411-226-58: RNCC: 3 | RNVC: 2
00.42.34.63: RNCC: 5 | RNVC: 2

9 Jun 2006

5120-12-365-3573
Montage- Hebel

123653573
2926HT10-01BP: RNCC: 3 | RNVC: 2

22 Dec 2004

5120-12-178-3280
Box Wrench

121783280
DIN3521-14: RNCC: 2 | RNVC: 2
29-070: RNCC: 3 | RNVC: 2
DIN3521-14: RNCC: 5 | RNVC: 2
DIN3521-14: RNCC: 5 | RNVC: 2
14DIN3521: RNCC: 5 | RNVC: 2
17021-165: RNCC: 5 | RNVC: 9

12 Apr 1979

5120-12-181-9732
Halteblaettchen

121819732
340-5: RNCC: 3 | RNVC: 9

28 Dec 1979

5120-12-170-6926
Spanner Wrench

121706926
1213-100-4: RNCC: 3 | RNVC: 2
1213-100-4: RNCC: 5 | RNVC: 9

28 Jul 1977

5120-12-322-0904
Combination Box And Open End Wrench Set

123220904
203S 26M: RNCC: 3 | RNVC: 2
111M/26T: RNCC: 3 | RNVC: 2
7-026: RNCC: 3 | RNVC: 2
190/26MM: RNCC: 3 | RNVC: 2
1920030: RNCC: 5 | RNVC: 2
00.31.49.45: RNCC: 5 | RNVC: 2
285 412: RNCC: 5 | RNVC: 2
01900056: RNCC: 5 | RNVC: 2
111/26-C: RNCC: 5 | RNVC: 9

24 Jul 1990

5120-12-159-9973
Hebevorrichtung

121599973
3106-9960-000: RNCC: 3 | RNVC: 2
3106-9960-000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-2123
Hand Hammer

123812123
754800-35: RNCC: 3 | RNVC: 2

21 Jan 2010

5120-12-137-4826
Socket Wrench

121374826
522115-11: RNCC: 3 | RNVC: 2
54014-4200: RNCC: 5 | RNVC: 2
24218: RNCC: 5 | RNVC: 9
24218: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-314-0895
Box Wrench

123140895
DIN837-B27X30: RNCC: 2 | RNVC: 2
TVA5120-2-263-032.1.1.26: RNCC: 5 | RNVC: 2

4 Jun 1988

5120-12-380-2855
Screwdriver Bit

123802855
00576: RNCC: 3 | RNVC: 2
269-0,25X1,5-0,5X3,0: RNCC: 5 | RNVC: 2

15 Oct 2009

5120-12-305-6144
Socket Wrench

123056144
4W405-A: RNCC: 3 | RNVC: 2
4W405-A: RNCC: 5 | RNVC: 9
4W405A: RNCC: 5 | RNVC: 9

27 Nov 1985

5120-12-168-3129
Spanner Wrench

121683129
264-202: RNCC: 3 | RNVC: 2
264-202: RNCC: 5 | RNVC: 2

7 Mar 1977

5120-12-379-7186
Mounting Sleeve

123797186
2809990067: RNCC: 3 | RNVC: 2
CCS/8500/007: RNCC: 5 | RNVC: 2

26 Aug 2009

5120-12-365-1295
Elektron Auszieher

123651295
5275300940: RNCC: 3 | RNVC: 2
M55.093.020: RNCC: 5 | RNVC: 2
(241)A4249M55.093.020: RNCC: 8 | RNVC: 2

1 Dec 2004

5120-12-139-5748

5120-12-171-4531
Oil Filter Wrench

121714531
190-80: RNCC: 3 | RNVC: 2
37: RNCC: 3 | RNVC: 2
00.40.10.33: RNCC: 5 | RNVC: 2
6327670: RNCC: 5 | RNVC: 2

13 Oct 1977

5120-12-123-5024
Open End Wrench

121235024
6X7DIN658: RNCC: 3 | RNVC: 2
TFS00-08340: RNCC: 5 | RNVC: 2
TFS00-08340: RNCC: 5 | RNVC: 9
6X7DIN658: RNCC: 5 | RNVC: 9
TFS00-08340: RNCC: 5 | RNVC: 9
DIN658-6-7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-365-9171
Swivel Knob Jeweler's Screwdriver

123659171
T4873X 09: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-130-8752
Spanner Wrench

121308752
51581: RNCC: 3 | RNVC: 2
00.16.04.52: RNCC: 5 | RNVC: 2
571G102: RNCC: 5 | RNVC: 9
107901: RNCC: 5 | RNVC: 9
4130: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-320-6265
Mechanical Puller Attachment

123206265
1970-1: RNCC: 3 | RNVC: 2
5798760002: RNCC: 5 | RNVC: 2

1 Feb 1990

5120-12-334-2949
Socket Wrench Socket

123342949
50-6-7: RNCC: 3 | RNVC: 2
00050600783: RNCC: 5 | RNVC: 2

25 Apr 1994

5120-12-022-8072

5120-12-349-4122
Mechanical Puller Attachment

123494122
0986617161: RNCC: 3 | RNVC: 2

11 Nov 1999

5120-12-355-4987
Dreh Haltewerkzeug

123554987
5584837: RNCC: 3 | RNVC: 2

20 Nov 2001

5120-12-186-1926
Ausdrueckvorrichtun

121861926
143650: RNCC: 3 | RNVC: 2

5 Dec 1980

5120-12-302-7543
Mechanical Puller Attachment

123027543
4900059-755111.000.0: RNCC: 3 | RNVC: 2
4900059-755111-000-0: RNCC: 5 | RNVC: 2

29 Jan 1985

5120-12-171-2157
Ausbauvorrichtung

121712157
81.66850-6017: RNCC: 3 | RNVC: 2
81668506017: RNCC: 3 | RNVC: 2

19 Sep 1977

5120-12-196-8246
Sp Montierwerkzeug

121968246
4900059-751470.000.0: RNCC: 2 | RNVC: 2
4900059-751470.000.0: RNCC: 3 | RNVC: 2
4900059-751470.000.0: RNCC: 5 | RNVC: 2
4900059-751470-000-0: RNCC: 5 | RNVC: 2

23 Aug 1983

5120-12-342-0752
Open End Wrench

123420752
DIN7446-21: RNCC: 2 | RNVC: 2

6 Dec 1996

5120-12-199-5980
Spanner Wrench

121995980
NO PRIMARY REF 12-199-5980: RNCC: 3 | RNVC: 2
4108: RNCC: 5 | RNVC: 9
107867: RNCC: 5 | RNVC: 9

15 May 1984

5120-12-194-7216
Mechanical Puller Attachment

121947216
018 200 15S: RNCC: 3 | RNVC: 2
01820015S: RNCC: 3 | RNVC: 2
018-200-15S: RNCC: 5 | RNVC: 2

30 Nov 1982

5120-12-371-4191
Me Montierwerkzeug

123714191
4.901-085.0: RNCC: 3 | RNVC: 2

27 Mar 2007

5120-12-367-7424
Ventil Heber

123677424
VW 2001/1: RNCC: 3 | RNVC: 2

5 Oct 2005

5120-12-312-8837
Hand Hammer

123128837
5140.C-0: RNCC: 3 | RNVC: 2
55811-7-0: RNCC: 5 | RNVC: 2

16 Feb 1988

5120-12-311-8036
Spanner Wrench

123118036
1000042-193643: RNCC: 3 | RNVC: 2

19 Oct 1987

5120-12-305-3541
Screw Thread Insert Inserter

123053541
015000203000: RNCC: 3 | RNVC: 2

25 Oct 1985

5120-12-311-8028
Spanner Wrench

123118028
5.58.002.018: RNCC: 3 | RNVC: 2
5.58002018: RNCC: 5 | RNVC: 2

19 Oct 1987

5120-12-382-6037
Mecha Ejector Tool

123826037
41285179: RNCC: 3 | RNVC: 2

15 Jul 2010

5120-12-197-7040
Spanner Wrench

121977040
3125890207: RNCC: 3 | RNVC: 2
312589020700: RNCC: 5 | RNVC: 2

15 Nov 1983

5120-12-365-3301
Mechanical Puller

123653301
5583237: RNCC: 3 | RNVC: 2
M55.093.057: RNCC: 5 | RNVC: 2
(241)A4249M55.093.057: RNCC: 8 | RNVC: 2

21 Dec 2004

5120-12-182-9276

5120-12-190-8617
Montierhuelse

121908617
NO PRIMARY REF 12-190-8617: RNCC: 3 | RNVC: 2
416570: RNCC: 5 | RNVC: 9

17 Dec 1981

5120-12-127-8499
Ausdruecker

121278499
30355710100108: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-020-5579

5120-12-387-7024
Bearing Staking Installation Tool

123877024
F6555738: RNCC: 3 | RNVC: 2

25 Jan 2012

5120-12-302-4266

5120-12-140-6721
Hand Screw Jack

121406721
EP5: RNCC: 3 | RNVC: 2
42010I: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-6167
Socket Wrench Socket

123886167
880LG-9: RNCC: 3 | RNVC: 2
4000896040858: RNCC: 5 | RNVC: 2

4 Apr 2012

5120-12-199-5710
Gewindee Aufweiter

121995710
SRM 0305 S: RNCC: 3 | RNVC: 2
SRM 0305 S: RNCC: 5 | RNVC: 9

15 May 1984

5120-12-367-6131
Adjustable Wrench

123676131
DIN3117-A250: RNCC: 2 | RNVC: 2
00.36.70.81: RNCC: 5 | RNVC: 2

12 Sep 2005

5120-12-149-5876
Socket Wrench

121495876
NO PRIMARY REF 12-149-5876: RNCC: 3 | RNVC: 2
105268: RNCC: 5 | RNVC: 9
1941FM26: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-315-4392
Socket Head Screw Key

123154392
1997L-Z1/2: RNCC: 3 | RNVC: 2

22 Oct 1988

5120-12-338-4362
Open End Wrench

123384362
90895131436: RNCC: 3 | RNVC: 2
00895131436: RNCC: 3 | RNVC: 2
895-13X14: RNCC: 3 | RNVC: 2

10 Jul 1995

5120-12-163-3911
Halter

121633911
510195-030-00: RNCC: 2 | RNVC: 2
169102903: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-198-1478
Lamp Extractor

121981478
603-101: RNCC: 3 | RNVC: 2
492 000: RNCC: 3 | RNVC: 2

27 Dec 1983

5120-12-176-7293
Druckstueck

121767293
VG95211-ML-121767293: RNCC: 2 | RNVC: 2
105-41069W1.02: RNCC: 3 | RNVC: 2
105-41069W1-02: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-357-7360
Piston Ring Expander

123577360
F30276147: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-361-1199
Box Wrench

123611199
CBD32568G01: RNCC: 3 | RNVC: 2

26 Aug 2003

5120-12-364-6803
Socket Wrench Socket

123646803
03020017-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-010-9669

5120-12-163-6093
Ausdrueckwerkzeug

121636093
105-31762W1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-187-8356
Face Spanner Wrench Socket

121878356
AFG009823: RNCC: 3 | RNVC: 2

13 May 1981

5120-12-330-2050
Socket Wrench Socket

123302050
03.364.20.03.0-65: RNCC: 3 | RNVC: 2

13 Nov 1992

5120-12-145-9608
D Eindrueck- Huelse

121459608
1875890739: RNCC: 3 | RNVC: 2
187589073900: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-339-3262
Spring Inserter And Remover

123393262
62750100: RNCC: 3 | RNVC: 2
627 501 00: RNCC: 5 | RNVC: 2

9 Nov 1995

5120-12-070-0197

5120-12-332-8075
Montierwerkzeugsatz

123328075
532113-8118.981: RNCC: 3 | RNVC: 2
532113-8118.981: RNCC: 5 | RNVC: 9

22 Sep 1993

5120-12-026-6081

5120-12-345-7284
Montierdorn

123457284
50001.017.498: RNCC: 3 | RNVC: 2
50001.017.498: RNCC: 5 | RNVC: 2

21 Apr 1998

5120-12-372-5835
Tap Extractor

123725835
33-3C: RNCC: 3 | RNVC: 2
01.98.92.07: RNCC: 5 | RNVC: 2

1 Aug 2007

5120-12-314-1590
Spanner Wrench

123141590
VY921022: RNCC: 3 | RNVC: 2

14 Jun 1988

5120-12-380-5655
Hand Terminal Crimping Tool

123805655
97 52 04: RNCC: 3 | RNVC: 2
4003773025450: RNCC: 5 | RNVC: 2

10 Nov 2009

5120-12-305-8603
Montierwerk Huelse

123058603
4900059-752055.000.0: RNCC: 2 | RNVC: 2
4900059-752055.000.0: RNCC: 3 | RNVC: 2

27 Dec 1985

5120-12-181-1571
Screwdriver Bit

121811571
1090-6: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-389-0347
Mechanical Puller Attachment

123890347
80996020160: RNCC: 3 | RNVC: 2
80.99602-0160: RNCC: 5 | RNVC: 2

21 May 2012

5120-12-379-6900
Socket Head Screw Key

123796900
2115-T50: RNCC: 3 | RNVC: 2
4000896012206: RNCC: 5 | RNVC: 2

24 Aug 2009

5120-12-380-6046
Ratchet Wrench Set

123806046
5733-850600A00C: RNCC: 3 | RNVC: 2
62735595: RNCC: 5 | RNVC: 2
62735595: RNCC: 5 | RNVC: 2

12 Nov 2009

5120-12-175-8694
Gum Dreidorn- Zange

121758694
90-942-340: RNCC: 3 | RNVC: 9

23 Oct 1978

5120-12-360-1922
Bearing And Bushing Inserter And Remover

123601922
80996040051: RNCC: 3 | RNVC: 2
80.99604-0051: RNCC: 5 | RNVC: 2

15 Apr 2003

5120-12-121-6882

5120-12-336-5847
Montierdorn

123365847
0850 6621: RNCC: 3 | RNVC: 2
8506621: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-321-6658
Mechanical Puller Forcing Screw

123216658
1402449: RNCC: 3 | RNVC: 2
1402449-4: RNCC: 5 | RNVC: 9
1402449/4: RNCC: 5 | RNVC: 9

13 Jun 1990

5120-12-194-1350
Socket Wrench

121941350
41-1693-990200.000.0: RNCC: 3 | RNVC: 2

5 Oct 1982

5120-12-140-9686
Montagevorrichtung

121409686
5180-001A: RNCC: 2 | RNVC: 2
0977041005: RNCC: 5 | RNVC: 2
0976125000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-317-3733
Socket Head Screw Key

123173733
C1997M2-5: RNCC: 3 | RNVC: 2
148466: RNCC: 5 | RNVC: 2
85-693-8769: RNCC: 6 | RNVC: 9

3 Apr 1989

5120-12-181-5282
Socket Wrench Adapter-Extension

121815282
R819504: RNCC: 3 | RNVC: 2
819504: RNCC: 5 | RNVC: 2
RLTCE6-15: RNCC: 5 | RNVC: 2
819504: RNCC: 5 | RNVC: 9
LTCE6-15: RNCC: 5 | RNVC: 9

29 Nov 1979

5120-12-332-8444
Zy Montierwerkzeug

123328444
6910000004: RNCC: 3 | RNVC: 2

27 Sep 1993

5120-12-140-9770

5120-12-309-6550
Spanner Wrench

123096550
33 59 27-9004.000: RNCC: 3 | RNVC: 2
335927-9004.000: RNCC: 5 | RNVC: 2
33 59 27-9004.000: RNCC: 5 | RNVC: 9
335927-9004-000: RNCC: 5 | RNVC: 9

13 Feb 1987

5120-12-159-7558
Montage- Hebel

121597558
1918-040019: RNCC: 2 | RNVC: 2
1918-040019: RNCC: 5 | RNVC: 2
1918-040019: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-175-6758
Socket Head Screw Key Set

121756758
JD5120-12-175-6758: RNCC: 3 | RNVC: 2
1997LM/10T: RNCC: 3 | RNVC: 2
1997LM 10T: RNCC: 3 | RNVC: 9
1302177: RNCC: 5 | RNVC: 2
7314151302177: RNCC: 5 | RNVC: 2
103217: RNCC: 5 | RNVC: 9
1997LM10T: RNCC: 5 | RNVC: 9

10 Oct 1978

5120-12-151-5118
Einrueckvorrichtung

121515118
23111-6906.00: RNCC: 2 | RNVC: 2
23111-6906.00: RNCC: 3 | RNVC: 2
23111-6906-00: RNCC: 5 | RNVC: 9
23111-6906-00: RNCC: 5 | RNVC: 9
23111-6906-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-329-9800
Mitnehmersch Stift

123299800
0852 3140.002: RNCC: 3 | RNVC: 2
8523140.002: RNCC: 5 | RNVC: 2

17 Oct 1992

5120-12-390-4216
Seal Inserter

123904216
F30373972: RNCC: 3 | RNVC: 2

12 Nov 2012

5120-12-176-8751
Aufdrueckvorrichtun

121768751
112630: RNCC: 3 | RNVC: 9

20 Dec 1978

5120-12-135-2218

5120-12-182-4459
Socket Wrench

121824459
620.371-5: RNCC: 3 | RNVC: 2
596000: RNCC: 5 | RNVC: 9
620371: RNCC: 5 | RNVC: 9

1 Feb 1980

5120-12-335-5186
Schluessel

123355186
620.373-1: RNCC: 3 | RNVC: 2

25 Aug 1994

5120-12-388-6829
Cable Type Ratchet Lever Puller

123886829
18129: RNCC: 3 | RNVC: 2
T532-D: RNCC: 5 | RNVC: 2

12 Apr 2012

5120-12-388-5958
Socket Wrench Screwdriver Attachment

123885958
8801-3: RNCC: 3 | RNVC: 2
4000896039364: RNCC: 5 | RNVC: 2

3 Apr 2012

5120-12-333-8532
Mechanical Puller

123338532
312589183300: RNCC: 3 | RNVC: 2

17 Feb 1994

5120-12-330-5537
Stud Inserter

123305537
0851 0480: RNCC: 3 | RNVC: 2
8510480: RNCC: 5 | RNVC: 2

8 Jan 1993

5120-12-324-5681
Mechanical Puller Attachment

123245681
VM563-1: RNCC: 3 | RNVC: 2
AZV906669-1: RNCC: 5 | RNVC: 2

28 Feb 1991

5120-12-123-5914
Socket Wrench Extension

121235914
509-2: RNCC: 3 | RNVC: 2
5460: RNCC: 3 | RNVC: 9
13010001: RNCC: 5 | RNVC: 2
110519: RNCC: 5 | RNVC: 9
203998: RNCC: 5 | RNVC: 9
8159: RNCC: 5 | RNVC: 9
509K: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-150-6191
Socket Wrench Socket

121506191
833589000900: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-364-5618
Pliers

123645618
65085160-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-172-7578
Bolzen

121727578
1200039-300000: RNCC: 3 | RNVC: 2
1200039-300000: RNCC: 5 | RNVC: 2

20 Feb 1978

5120-12-180-4030
Erdnagel Auszieher

121804030
5900063-214100.00: RNCC: 3 | RNVC: 2
5900063-214100-00: RNCC: 5 | RNVC: 2
5900063-214100.00: RNCC: 5 | RNVC: 2

10 Sep 1979

5120-12-377-1109
Mechanical Puller

123771109
12614-0: RNCC: 3 | RNVC: 2
71040010: RNCC: 5 | RNVC: 2

11 Dec 2008

5120-12-354-4652
Socket Wrench Socket

123544652
1X36185311: RNCC: 3 | RNVC: 2
15006271: RNCC: 5 | RNVC: 2

16 Jul 2001

5120-12-181-2302
Mechanical Puller

121812302
403589013300: RNCC: 3 | RNVC: 2

5 Nov 1979

5120-12-134-2731
La Aufhaengebuegel

121342731
066M00800: RNCC: 3 | RNVC: 2
VM65788: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-349-4033
Bearing And Bushing Inserter And Remover

123494033
0986611080: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-193-6102
Mechanical Puller

121936102
0501205030: RNCC: 3 | RNVC: 2
05.012.05.03.0: RNCC: 5 | RNVC: 2
E-09.012.05.03.0: RNCC: 5 | RNVC: 9

10 Aug 1982

5120-12-168-5317
Flat Tip Screwdriver

121685317
8030-0,6X4,5X25: RNCC: 3 | RNVC: 2
8030N0-6X4-5X25: RNCC: 5 | RNVC: 2
603-007: RNCC: 5 | RNVC: 2
131541: RNCC: 5 | RNVC: 2
131611: RNCC: 5 | RNVC: 9

18 Mar 1977

5120-12-142-0271
Abzieher Haken

121420271
558: RNCC: 3 | RNVC: 2
TS5120-0657-558: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-391-8563
Pipe Mounting Tool

123918563
RTMT0-02-06: RNCC: 3 | RNVC: 2

12 Apr 2013

5120-12-137-9888
Socket Wrench

121379888
31114000021: RNCC: 3 | RNVC: 2
31114000-021: RNCC: 5 | RNVC: 9
42L2556: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-7315
Ka Montierwerkzeug

123687315
313769: RNCC: 3 | RNVC: 2
0857-03-11-00/37: RNCC: 5 | RNVC: 2

11 Apr 2006

5120-12-343-7348
Flat Tip Screwdriver

123437348
600 044 10: RNCC: 3 | RNVC: 2
1435-0,8X4X125: RNCC: 3 | RNVC: 2
01435012580: RNCC: 5 | RNVC: 2

18 Jul 1997

5120-12-353-9119
Dreh Haltewerkzeug

123539119
51.16100-5001: RNCC: 3 | RNVC: 2

17 May 2001

5120-12-192-0305
Combination Box And Open End Wrench

121920305
K1149001-0152: RNCC: 3 | RNVC: 2
NR11: RNCC: 3 | RNVC: 2

22 Mar 1982

5120-12-172-9125
Auflage

121729125
VG95211-ML-121729125: RNCC: 2 | RNVC: 2
1X56 136 663: RNCC: 3 | RNVC: 2
1X56136663: RNCC: 5 | RNVC: 9

2 Mar 1978

5120-12-190-3225
Hand Tube Flaring Tool

121903225
16-P17414-M27416: RNCC: 3 | RNVC: 2
16P17414M27416: RNCC: 5 | RNVC: 2

19 Nov 1981

5120-12-130-2449
Socket Wrench

121302449
659-21: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-356-6747
Socket Wrench

123566747
DIN3112-K65-A: RNCC: 2 | RNVC: 2
DS3112-65: RNCC: 3 | RNVC: 2

21 Mar 2002

5120-12-186-1942
Montierwerk Huelse

121861942
23305-264110.05.0: RNCC: 2 | RNVC: 2
23305-264110-05-0: RNCC: 3 | RNVC: 2
23305-264110-05-0: RNCC: 5 | RNVC: 9
23305-264110.05.0: RNCC: 5 | RNVC: 9

5 Dec 1980

5120-12-389-0028
Electrical Contact Remover

123890028
80996060520: RNCC: 3 | RNVC: 2
80.99606-0520: RNCC: 5 | RNVC: 2

15 May 2012

5120-12-194-7443
Socket Head Screw Key

121947443
41-1180-3100.000.0: RNCC: 3 | RNVC: 2
5120121947443: RNCC: 5 | RNVC: 2

3 Dec 1982

5120-12-151-6517
Screwdriver Bit

121516517
54X-M8: RNCC: 3 | RNVC: 2
INX19-8: RNCC: 3 | RNVC: 2
990-8: RNCC: 3 | RNVC: 2
INX19-8: RNCC: 5 | RNVC: 2
03060008: RNCC: 5 | RNVC: 2
2487170003: RNCC: 5 | RNVC: 9
INX19-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-152-6908
Socket Wrench Socket

121526908
NO PRIMARY REF 12-152-6908: RNCC: 3 | RNVC: 2
109963: RNCC: 5 | RNVC: 9
7820M14: RNCC: 5 | RNVC: 9
03110014: RNCC: 5 | RNVC: 9
50DSQ-14: RNCC: 5 | RNVC: 9
50DSQ14: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-157-2614
Eindrueck- Huelse

121572614
7418798009: RNCC: 3 | RNVC: 2
7418-798-009: RNCC: 5 | RNVC: 2
3135552R1: RNCC: 5 | RNVC: 2
7418798009: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-158-8345
Socket Wrench Handle Bar

121588345
02247: RNCC: 3 | RNVC: 2
02247: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-352-3334
Drive Pin Punch

123523334
22015.0.00.100.00P0S.2: RNCC: 3 | RNVC: 2

8 Nov 2000

5120-12-323-8460
L Verstemmwerkzeug

123238460
105-42121W6: RNCC: 3 | RNVC: 2

21 Dec 1990

5120-12-342-9945
Pliers

123429945
8133-170 JC: RNCC: 3 | RNVC: 2
672211: RNCC: 5 | RNVC: 2

22 Apr 1997

5120-12-376-2094
Torque Wrench Adapter

123762094
725/4: RNCC: 3 | RNVC: 2
58254004: RNCC: 5 | RNVC: 2

25 Aug 2008

5120-12-192-0836
Socket Wrench Handle Bar

121920836
621800-180: RNCC: 3 | RNVC: 2
4325282: RNCC: 5 | RNVC: 2
50750101: RNCC: 5 | RNVC: 2
6218-180: RNCC: 5 | RNVC: 9
62180-180: RNCC: 5 | RNVC: 9

23 Mar 1982

5120-12-164-7899
Kartenzieher

121647899
5801209-221-002: RNCC: 3 | RNVC: 2
5801209-221.002: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-186-8602
Mechanical Puller

121868602
99347040: RNCC: 3 | RNVC: 2
430010: RNCC: 5 | RNVC: 9
430010: RNCC: 5 | RNVC: 9

13 Feb 1981

5120-12-120-6561
Shovel Handle

121206561
DIN20151-BU: RNCC: 2 | RNVC: 2
1300DIN20151-BU: RNCC: 5 | RNVC: 9
1300DIN20151BU: RNCC: 5 | RNVC: 9
1300DIN20151BUCHE: RNCC: 5 | RNVC: 9
DIN20151-1300-BU: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-7330
Auswechselwe Griff

121907330
6008R-0820.00.0: RNCC: 2 | RNVC: 2
6008R-0820.00.0: RNCC: 3 | RNVC: 2
6008R-0820.00.0: RNCC: 5 | RNVC: 9
6008R-0820.00.0: RNCC: 5 | RNVC: 9

10 Dec 1981

5120-12-385-2487
Spatula Set

123852487
NO PRIMARY REF 12-385-2487: RNCC: 3 | RNVC: 2
455204: RNCC: 5 | RNVC: 2

12 May 2011

5120-12-316-8881
Rohrbieg Glaetteil

123168881
7-3/80-000-093-31407: RNCC: 3 | RNVC: 2

22 Feb 1989

5120-12-305-6644
Socket Wrench

123056644
9238271400: RNCC: 3 | RNVC: 2

3 Dec 1985

5120-12-325-8824
Torque Wrench Adapter

123258824
4991008: RNCC: 3 | RNVC: 2

17 Jul 1991

5120-12-368-6703
Socket Wrench Screwdriver Attachment

123686703
3500-IS1,6: RNCC: 3 | RNVC: 2
00.47.41.85: RNCC: 5 | RNVC: 2

5 Apr 2006

5120-12-173-0486
Torque Wrench Multiplier

121730486
1X56 136 858: RNCC: 3 | RNVC: 2
1X56136858: RNCC: 5 | RNVC: 9

15 Mar 1978

5120-12-040-0212

5120-12-358-2116
Cross Tip Screwdriver

123582116
6134222: RNCC: 3 | RNVC: 2
613 422 2: RNCC: 5 | RNVC: 2
6139182: RNCC: 5 | RNVC: 9

26 Sep 2002

5120-12-158-1050
Spanner Wrench

121581050
SS2894-4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-023-2524

5120-12-304-0570
Screwdriver Bit

123040570
0121 8201: RNCC: 3 | RNVC: 2
1218201: RNCC: 5 | RNVC: 2
H99769A7SW7: RNCC: 5 | RNVC: 2

4 Jun 1985

5120-12-337-1801
Mechanical Puller Attachment

123371801
8511408.002: RNCC: 3 | RNVC: 2
0851 1408.002: RNCC: 5 | RNVC: 2

30 Jan 1995

5120-12-348-6331
Machinist's Vise

123486331
410: RNCC: 3 | RNVC: 2

28 Jul 1999

5120-12-370-9524
Pliers

123709524
3815200: RNCC: 3 | RNVC: 2
8136-200JC: RNCC: 3 | RNVC: 2
00.15.03.48: RNCC: 5 | RNVC: 2
6722700: RNCC: 5 | RNVC: 2
4003773039594: RNCC: 5 | RNVC: 2

19 Jan 2007

5120-12-371-7123
Spanner Wrench

123717123
143430: RNCC: 3 | RNVC: 2
E7531-00-00: RNCC: 5 | RNVC: 2

8 May 2007

5120-12-164-8070
Offset Screwdriver

121648070
2047-13: RNCC: 3 | RNVC: 2
106050: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-371-4105
Montierwerk Huelse

123714105
80996010171: RNCC: 3 | RNVC: 2
80.99601-0171: RNCC: 5 | RNVC: 2

26 Mar 2007

5120-12-159-2467
Schluessel

121592467
23111-6901.05: RNCC: 2 | RNVC: 2
23111-6901.05: RNCC: 3 | RNVC: 2
23111-6901.05: RNCC: 5 | RNVC: 9
23111-6901-05: RNCC: 5 | RNVC: 9
23111-6901-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-357-7729
Pliers

123577729
8410200: RNCC: 3 | RNVC: 2
431: RNCC: 5 | RNVC: 2
70680-200: RNCC: 5 | RNVC: 2
706800-200: RNCC: 5 | RNVC: 2

22 Jul 2002

5120-12-121-8653
Joint Breaking Wedge

121218653
NO PRIMARY REF 12-121-8653: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-329-3588
Open End Wrench

123293588
6-4X4,5: RNCC: 3 | RNVC: 2
6063400: RNCC: 5 | RNVC: 2

12 Aug 1992

5120-12-177-2785
Montierwerk Huelse

121772785
2300002-269000.001: RNCC: 2 | RNVC: 2
2300002-269000.001: RNCC: 3 | RNVC: 2
2300002-269000.001: RNCC: 5 | RNVC: 9
2300002-269000-001: RNCC: 5 | RNVC: 9

24 Jan 1979

5120-12-149-5830
Socket Wrench

121495830
NO PRIMARY REF 12-149-5830: RNCC: 3 | RNVC: 2
26R9-16X5-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-387-2605
Installation And Re

123872605
030.319: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-12-123-5260
Open End Box Wrench

121235260
NO PRIMARY REF 12-123-5260: RNCC: 3 | RNVC: 2
BELZER1949M1416: RNCC: 5 | RNVC: 2
105543: RNCC: 5 | RNVC: 2
1949M1416: RNCC: 5 | RNVC: 2
105543: RNCC: 5 | RNVC: 9
1949M14X16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-380-5657
Mechanical Puller

123805657
8012400: RNCC: 3 | RNVC: 2
8012400: RNCC: 5 | RNVC: 2
1.07/4-HSP3: RNCC: 5 | RNVC: 2
4036976105223: RNCC: 5 | RNVC: 2
1.07/4-HSP3: RNCC: 5 | RNVC: 2
4036976105223: RNCC: 5 | RNVC: 2

10 Nov 2009

5120-12-126-3217
Screw Extractor Set

121263217
TL5120-0052: RNCC: 2 | RNVC: 2
1418S: RNCC: 3 | RNVC: 2
104060: RNCC: 5 | RNVC: 2
5120-0052: RNCC: 5 | RNVC: 9
5120-052: RNCC: 5 | RNVC: 9
5120-01037: RNCC: 6 | RNVC: 9
5120-01036: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-155-0183
Flat Tip Screwdriver

121550183
8060VDE-0,6X4,5X100: RNCC: 3 | RNVC: 2
5M8936-222-12: RNCC: 5 | RNVC: 2
169129: RNCC: 5 | RNVC: 2
110322: RNCC: 5 | RNVC: 9
8060N0-6X4-5X100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-2547
Rohrbieg Glaetteil

123052547
7-5/80-000-187-21448: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-130-7908
Screwdriver Bit

121307908
NO PRIMARY REF 12-130-7908: RNCC: 3 | RNVC: 2
TS5120-1160: RNCC: 5 | RNVC: 1
TS5120-1160U: RNCC: 5 | RNVC: 2
109837: RNCC: 5 | RNVC: 9
7803-2: RNCC: 5 | RNVC: 9
03080003: RNCC: 5 | RNVC: 9
511-3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1696
Saddler's Collar Awl

121261696
318120: RNCC: 3 | RNVC: 2
891-200: RNCC: 5 | RNVC: 9
5180-0056-7: RNCC: 5 | RNVC: 9
5180-056-7: RNCC: 5 | RNVC: 9
TL5180-0056-7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-332-9219
Torque Wrench Adapter

123329219
20/0-14: RNCC: 3 | RNVC: 2
20-0-14: RNCC: 5 | RNVC: 2
20-0-14: RNCC: 5 | RNVC: 2
85-694-9953: RNCC: 6 | RNVC: 9

5 Oct 1993

5120-12-126-4951
Mechanical Puller Attachment

121264951
4521D: RNCC: 3 | RNVC: 2
21-4: RNCC: 3 | RNVC: 2
88260-4: RNCC: 3 | RNVC: 2
882600-4: RNCC: 3 | RNVC: 2
0535788: RNCC: 5 | RNVC: 2
882604: RNCC: 5 | RNVC: 2
108151: RNCC: 5 | RNVC: 2
88260-4: RNCC: 5 | RNVC: 2
535788: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-121-1082
Flat Tip Screwdriver

121211082
NO PRIMARY REF 12-121-1082: RNCC: 3 | RNVC: 2
AW9900A211: RNCC: 5 | RNVC: 2
66-3524-050-01LV: RNCC: 5 | RNVC: 2
131609: RNCC: 5 | RNVC: 9
8020N1X6X40: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-309-9077
Mechan Adaptersatz

123099077
507589002500: RNCC: 3 | RNVC: 2
5075890025/00: RNCC: 5 | RNVC: 2

17 Mar 1987

5120-12-131-4349
Socket Wrench

121314349
NO PRIMARY REF 12-131-4349: RNCC: 3 | RNVC: 2
105191: RNCC: 5 | RNVC: 9
1937M11: RNCC: 5 | RNVC: 9
1687950058: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-130-3378
Tap And Reamer Extension

121303378
DIN377-9: RNCC: 2 | RNVC: 2
807-9: RNCC: 3 | RNVC: 2
83324: RNCC: 3 | RNVC: 2
207111: RNCC: 3 | RNVC: 2
3110-9: RNCC: 3 | RNVC: 2
9DIN377: RNCC: 5 | RNVC: 2
4826-9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-349-9299
Torque Wrench Adapter

123499299
6423C: RNCC: 3 | RNVC: 2
027934: RNCC: 5 | RNVC: 2

26 Jan 2000

5120-12-368-9930
Mechanical Puller

123689930
1X53 174 720.1: RNCC: 3 | RNVC: 2

11 May 2006

Load More Results