What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 44 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 44 of 62

5120-12-314-4704
Tool Handle Wedge

123144704
370-KH3: RNCC: 3 | RNVC: 2
KH3: RNCC: 5 | RNVC: 2

9 Jul 1988

5120-12-176-7148
Socket Head Screw Key

121767148
DIN905-17: RNCC: 2 | RNVC: 2
17DIN905: RNCC: 5 | RNVC: 2

13 Dec 1978

5120-12-155-0615
Open End Wrench

121550615
4-62-052: RNCC: 3 | RNVC: 2
4-62-052: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-171-1309
Nietvorrichtung

121711309
100227-93600: RNCC: 2 | RNVC: 2
9010-0573-00: RNCC: 3 | RNVC: 2
100227-93600: RNCC: 5 | RNVC: 9

9 Sep 1977

5120-12-142-1026
Stud Inserter And Remover

121421026
580: RNCC: 3 | RNVC: 2
572J201B: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-368-9721
Rohr- Zange

123689721
110 010 2: RNCC: 3 | RNVC: 2
00.13.21.60: RNCC: 5 | RNVC: 2

9 May 2006

5120-12-316-6646
Spanner Wrench Set

123166646
5188001: RNCC: 3 | RNVC: 2

31 Jan 1989

5120-12-351-3164
Seal Inserter

123513164
9249464000: RNCC: 3 | RNVC: 2

12 Jul 2000

5120-12-170-2619

5120-12-312-9349
Craftsman's Tweezers

123129349
NO PRIMARY REF 12-312-9349: RNCC: 3 | RNVC: 2
71-936: RNCC: 5 | RNVC: 9

19 Feb 1988

5120-12-344-1082
Pliers

123441082
2505-140: RNCC: 3 | RNVC: 2
2430G-140: RNCC: 3 | RNVC: 2

12 Sep 1997

5120-12-309-8581
Mechanical Puller Step Plate

123098581
NO PRIMARY REF 12-309-8581: RNCC: 3 | RNVC: 2
41 01 01: RNCC: 5 | RNVC: 9
34 62 17: RNCC: 5 | RNVC: 9
410101: RNCC: 5 | RNVC: 9

11 Mar 1987

5120-12-333-5664
Seal Inserter

123335664
1841701: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-391-2809
Socket Wrench Socket

123912809
03010025-TCS: RNCC: 3 | RNVC: 2

1 Mar 2013

5120-12-010-1372

5120-12-170-7651
Pinch Bar

121707651
3680-400: RNCC: 3 | RNVC: 2
107583: RNCC: 5 | RNVC: 2

5 Aug 1977

5120-12-176-7333
Zylinderbolzen

121767333
VG95211-ML-121767333: RNCC: 2 | RNVC: 2
105-42121W2.02: RNCC: 3 | RNVC: 2
105-42121W2-02: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-346-7244
Box Wrench

123467244
DIN 837-21X24: RNCC: 2 | RNVC: 2
21-21X24: RNCC: 3 | RNVC: 2
41052124: RNCC: 5 | RNVC: 2

2 Sep 1998

5120-12-700-3677
Open End Wrench

127003677
51-083001010: RNCC: 2 | RNVC: 2

14 Apr 1992

5120-12-301-0930
Hydraulic Jack Handle

123010930
305883.2: RNCC: 3 | RNVC: 2
305883-2: RNCC: 5 | RNVC: 2

21 Sep 1984

5120-12-093-7710

5120-12-384-5676
Wor Pressure Piece

123845676
7122336: RNCC: 3 | RNVC: 2

9 Mar 2011

5120-12-093-7705

5120-12-154-2571
Spanner Wrench

121542571
5191154-280: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-174-4558
Abziehvorrichtung

121744558
VG95211-ML-121744558: RNCC: 2 | RNVC: 2
30AM002-102: RNCC: 3 | RNVC: 2

29 Jun 1978

5120-12-195-2949
Socket Wrench

121952949
D-03.364.14.02.0: RNCC: 3 | RNVC: 2

7 Feb 1983

5120-12-150-3961
L Haltevorrichtung

121503961
1X46107332: RNCC: 3 | RNVC: 2
V107332: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-305-8805
Bearing And Bushing Inserter

123058805
4900059-752030.000.0: RNCC: 2 | RNVC: 2
4900059-752030.000.0: RNCC: 3 | RNVC: 2

30 Dec 1985

5120-12-180-5453
Mechanical Puller Attachment

121805453
3907-33000-001: RNCC: 3 | RNVC: 2
83.09143-0027: RNCC: 5 | RNVC: 2
83091430027: RNCC: 5 | RNVC: 2

17 Sep 1979

5120-12-151-6544
Aufnahmevorrichtung

121516544
1004-0200V4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-173-1727
Vorrichtung

121731727
VG95211-ML-121731727: RNCC: 2 | RNVC: 2
1X56136907: RNCC: 3 | RNVC: 2
1X56136907: RNCC: 3 | RNVC: 2

22 Mar 1978

5120-12-070-0193

5120-12-331-5955
Aligning Punch

123315955
100710: RNCC: 3 | RNVC: 2
100 710: RNCC: 5 | RNVC: 2
100 710: RNCC: 5 | RNVC: 9

25 May 1993

5120-12-193-5711
Socket Wrench Crowfoot Attachment

121935711
4S51331-0000: RNCC: 3 | RNVC: 2
4S51331-0001: RNCC: 3 | RNVC: 2
4S51331-0000-403: RNCC: 5 | RNVC: 2
4S51331-0000-407: RNCC: 5 | RNVC: 2
4S51331-0000-405: RNCC: 5 | RNVC: 2
MAGERD 3534: RNCC: 5 | RNVC: 9

4 Aug 1982

5120-12-003-0186

5120-12-343-7276
Swivel Knob Jeweler's Screwdriver

123437276
240 255 90: RNCC: 3 | RNVC: 2

17 Jul 1997

5120-12-388-6667
Hydraulic Adapter

123886667
030.205: RNCC: 3 | RNVC: 2
030.205: RNCC: 5 | RNVC: 2

11 Apr 2012

5120-12-155-8256
Socket Head Screw Key

121558256
1997Z-7/64: RNCC: 3 | RNVC: 2
1010-7-64: RNCC: 3 | RNVC: 2
10760ACV-7/64: RNCC: 3 | RNVC: 2
130236: RNCC: 5 | RNVC: 2
13565: RNCC: 5 | RNVC: 2
43550007: RNCC: 5 | RNVC: 2
1997Z 7-64: RNCC: 5 | RNVC: 9
1997Z7-64: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-0596
Einfuehr- Huelse

121460596
23114-7101-15: RNCC: 2 | RNVC: 2
510166: RNCC: 3 | RNVC: 2
510166: RNCC: 5 | RNVC: 9
510166: RNCC: 5 | RNVC: 9
23114-7101-15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-306-7910
Seal Inserter

123067910
66934600: RNCC: 3 | RNVC: 2
161101A-E75-M49: RNCC: 5 | RNVC: 2
66934600164: RNCC: 5 | RNVC: 2

3 Apr 1986

5120-12-140-9570
Schluessel

121409570
RP516-70: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-354-3822
Box Wrench Set

123543822
W00026: RNCC: 3 | RNVC: 2
61580-10: RNCC: 5 | RNVC: 2

5 Jul 2001

5120-12-351-3295
Jack Elevating Block

123513295
81668400032: RNCC: 3 | RNVC: 2
81.66840-0032: RNCC: 5 | RNVC: 2

13 Jul 2000

5120-12-191-9352
Stuetze

121919352
NO PRIMARY REF 12-191-9352: RNCC: 3 | RNVC: 2
420120: RNCC: 5 | RNVC: 9

16 Mar 1982

5120-12-305-3093
Box Wrench

123053093
NO PRIMARY REF 12-305-3093: RNCC: 3 | RNVC: 2
3S-M6X7: RNCC: 5 | RNVC: 9
17-6X7: RNCC: 5 | RNVC: 9

21 Oct 1985

5120-12-193-3193

5120-12-197-4691
Schluesseleinsatz

121974691
4983014: RNCC: 3 | RNVC: 2

25 Oct 1983

5120-12-337-1805
Mechanical Puller Attachment

123371805
8511774.005: RNCC: 3 | RNVC: 2
0851 1774.005: RNCC: 5 | RNVC: 2

30 Jan 1995

5120-12-195-1803
Open End Wrench

121951803
DIN7446-17: RNCC: 2 | RNVC: 2
980017: RNCC: 3 | RNVC: 2
613330VDE17: RNCC: 3 | RNVC: 2
151317: RNCC: 3 | RNVC: 2
613330VDE17: RNCC: 3 | RNVC: 2
61333VDE17: RNCC: 5 | RNVC: 2
61333VDE17: RNCC: 5 | RNVC: 2
1953VDE17: RNCC: 5 | RNVC: 9
151417: RNCC: 5 | RNVC: 9
9507-17: RNCC: 5 | RNVC: 9

20 Jan 1983

5120-12-133-4246
Socket Wrench

121334246
M729196: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-363-0358
Mechanical Puller Attachment

123630358
5583168: RNCC: 3 | RNVC: 2
(241)A42495583168: RNCC: 8 | RNVC: 2
5583168: RNCC: 8 | RNVC: 2

28 Apr 2004

5120-12-133-3522
Box Wrench

121333522
1300M18X19: RNCC: 3 | RNVC: 2
103986: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-365-5397
Flat Tip Screwdriver

123655397
47281025-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-159-7706
Spanner Wrench

121597706
6900026-9310: RNCC: 3 | RNVC: 2
100180-731: RNCC: 5 | RNVC: 2
100180-731: RNCC: 5 | RNVC: 9
100180-731: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-044-4877

5120-12-168-6698

5120-12-364-3155
Socket Wrench Extension

123643155
12011002-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-191-4897
Kurbel

121914897
S4-9801570: RNCC: 2 | RNVC: 2
5120121914897: RNCC: 5 | RNVC: 2
S4-9801570: RNCC: 5 | RNVC: 2
S4-9801570: RNCC: 5 | RNVC: 9
S4-9801570: RNCC: 5 | RNVC: 9

8 Feb 1982

5120-12-339-9582
Mechanical Puller

123399582
5073371: RNCC: 3 | RNVC: 2
698-430-0011: RNCC: 5 | RNVC: 2

6 Feb 1996

5120-12-341-4046
Socket Wrench Socket

123414046
DIN3124-S34X20L: RNCC: 2 | RNVC: 2
56-34: RNCC: 3 | RNVC: 2
05020034: RNCC: 5 | RNVC: 2

31 Aug 1996

5120-12-339-9186
Schluessel

123399186
F30279075: RNCC: 3 | RNVC: 2

1 Feb 1996

5120-12-390-1309
Seal Inserter

123901309
437589144300: RNCC: 3 | RNVC: 2

9 Oct 2012

5120-12-132-1212
Socket Wrench

121321212
DIN904-8: RNCC: 2 | RNVC: 2
1170-8: RNCC: 3 | RNVC: 2
775843: RNCC: 5 | RNVC: 2
16313: RNCC: 5 | RNVC: 2
8DIN904: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-197-0852
Hand Armament Subsystem Carrier

121970852
4900059-751610.000.0: RNCC: 2 | RNVC: 2
4900059-751610.000.0: RNCC: 3 | RNVC: 2
4900059-751610.000.0: RNCC: 5 | RNVC: 2
4900059-751610-000-0: RNCC: 5 | RNVC: 2

19 Sep 1983

5120-12-349-0032
Mechanical Puller

123490032
CH1774-8-1NM: RNCC: 3 | RNVC: 2
820589416101: RNCC: 5 | RNVC: 2
8205894161/01: RNCC: 5 | RNVC: 2

13 Sep 1999

5120-12-377-3289
Spanner Wrench

123773289
F30379151: RNCC: 3 | RNVC: 2

9 Jan 2009

5120-12-184-1769
Einpreszwerkzeug

121841769
F6141943: RNCC: 3 | RNVC: 2
F605332141943: RNCC: 5 | RNVC: 9

1 Jul 1980

5120-12-135-7854
Kolbeneinbauring

121357854
WA28447: RNCC: 3 | RNVC: 2
WA28447: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-168-5596
Socket Wrench Handle Bar

121685596
3635810103: RNCC: 3 | RNVC: 2

22 Mar 1977

5120-12-322-3757
Open End Wrench

123223757
54.0070.118.02: RNCC: 2 | RNVC: 2
54.0070.118.02: RNCC: 5 | RNVC: 2

16 Aug 1990

5120-12-181-9542
Hand Caulking Tool

121819542
01TC33310: RNCC: 3 | RNVC: 2

28 Dec 1979

5120-12-350-2719
Bl Ausbeulwerkzeug

123502719
066BR: RNCC: 3 | RNVC: 2

9 Mar 2000

5120-12-306-8645
Spanner Wrench

123068645
3-2895-053: RNCC: 3 | RNVC: 2
2895053: RNCC: 5 | RNVC: 2

11 Apr 1986

5120-12-126-2581
Blacksmiths' Tongs

121262581
57108050: RNCC: 3 | RNVC: 2
4138-500: RNCC: 5 | RNVC: 2
57108-500: RNCC: 5 | RNVC: 9
2837-500: RNCC: 5 | RNVC: 9
C24DIN5171: RNCC: 5 | RNVC: 9
DIN5171-C24: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-702-6953
Lamp Extractor

127026953
25-08301049204: RNCC: 3 | RNVC: 2

29 Nov 1995

5120-12-332-7138
Socket Wrench Socket

123327138
80996030176: RNCC: 3 | RNVC: 2
80.99603-0176: RNCC: 5 | RNVC: 2

9 Sep 1993

5120-12-356-0248
Spanner Wrench

123560248
2800-990200.001.0: RNCC: 2 | RNVC: 2
2800-990200.001.0: RNCC: 3 | RNVC: 2

15 Jan 2002

5120-12-123-5815
Socket Wrench Socket

121235815
8900DZ3-4: RNCC: 3 | RNVC: 2
1000AZ-3/4: RNCC: 3 | RNVC: 2
110601: RNCC: 5 | RNVC: 2
1000AZ3-4: RNCC: 5 | RNVC: 2
12140: RNCC: 5 | RNVC: 2
2389120001: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-334-2948
Socket Wrench Socket

123342948
50-6-6: RNCC: 3 | RNVC: 2
00050600683: RNCC: 5 | RNVC: 2

25 Apr 1994

5120-12-308-8318
Bearing And Bushing Inserter

123088318
80996170133: RNCC: 3 | RNVC: 2
80.99617.0133: RNCC: 5 | RNVC: 2

21 Nov 1986

5120-12-322-3509
Mechanical Puller

123223509
30-2: RNCC: 3 | RNVC: 2
11051-3: RNCC: 3 | RNVC: 2
01.52.05.73: RNCC: 5 | RNVC: 2

14 Aug 1990

5120-12-177-3661
Fuehrungs- Buchse

121773661
0276158001: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-357-7343
Mechanical Puller Attachment

123577343
F30373762: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-316-1452
Bearing And Bushing Inserter

123161452
1X56112761: RNCC: 3 | RNVC: 2

24 Dec 1988

5120-12-182-2050
Retaining Ring Pliers

121822050
2576: RNCC: 3 | RNVC: 9
VW122B: RNCC: 3 | RNVC: 9

18 Jan 1980

5120-12-133-4685
Spanner Wrench

121334685
5185891307: RNCC: 3 | RNVC: 2
518589130700: RNCC: 3 | RNVC: 2
024M00300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-404-6753

5120-12-303-2888
Open End Wrench

123032888
39459: RNCC: 3 | RNVC: 2
GC190R: RNCC: 5 | RNVC: 2

13 Mar 1985

5120-12-375-1816
Mechanical Puller

123751816
1X56 122 210: RNCC: 3 | RNVC: 2

29 Apr 2008

5120-12-331-0696
Retaining Ring Pliers

123310696
71996AX: RNCC: 3 | RNVC: 9

18 Mar 1993

5120-12-198-3611
Pliers

121983611
328: RNCC: 3 | RNVC: 2
8522205: RNCC: 3 | RNVC: 2
607602: RNCC: 5 | RNVC: 2

19 Jan 1984

5120-12-369-0712
Mechanical Puller

123690712
KL-0165-31: RNCC: 3 | RNVC: 2

18 May 2006

5120-12-305-6547
Blacksmith's Anvil

123056547
57159010: RNCC: 3 | RNVC: 9

29 Nov 1985

5120-12-364-2920
Flat Tip Screwdriver

123642920
48201065-TCS: RNCC: 3 | RNVC: 2

8 Sep 2004

5120-12-389-4068
Aligning Punch

123894068
F30379300: RNCC: 3 | RNVC: 2

3 Jul 2012

5120-12-369-9995
Spanner Wrench

123699995
DF 412 211 AE: RNCC: 2 | RNVC: 2
DF 412 211 AE: RNCC: 3 | RNVC: 2

4 Sep 2006

5120-12-157-0627
Socket Wrench

121570627
25139701004: RNCC: 3 | RNVC: 2
71111237856: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-129-6229
Spanner Wrench

121296229
5066992: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-391-7365
Lifting Pneumatic Bag Kit

123917365
416.9550: RNCC: 3 | RNVC: 2

2 Apr 2013

5120-12-359-6140
Eindrueckwerkzeugte

123596140
T631P3002101: RNCC: 3 | RNVC: 2

21 Feb 2003

5120-12-333-6781
Hand Scissors Jack

123336781
701011031M: RNCC: 3 | RNVC: 2

21 Jan 1994

5120-12-313-8570
Spanner Wrench

123138570
HN21: RNCC: 3 | RNVC: 2

12 May 1988

5120-12-092-2895

5120-12-312-3009
Hand Helical Spring Puller Hook

123123009
80996066003: RNCC: 3 | RNVC: 2
80.99606.6003: RNCC: 5 | RNVC: 2

14 Dec 1987

5120-12-126-3346
Hand Hammer

121263346
DIN6475-5S: RNCC: 2 | RNVC: 2
5293025000: RNCC: 3 | RNVC: 2
5SDIN6475: RNCC: 5 | RNVC: 2
5293.02.5: RNCC: 5 | RNVC: 2
623A102-5-00: RNCC: 5 | RNVC: 9
215E5: RNCC: 5 | RNVC: 9
51543-4-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-332-3649
Mechanical Puller

123323649
4543-20: RNCC: 3 | RNVC: 2
606-3: RNCC: 3 | RNVC: 2
172154: RNCC: 5 | RNVC: 2
652229: RNCC: 5 | RNVC: 2

4 Aug 1993

5120-12-131-4391
Socket Wrench Screwdriver Attachment

121314391
IN19-9-32: RNCC: 3 | RNVC: 2
TVA5120-2-263-037-1.1.44: RNCC: 5 | RNVC: 1
IN 19 9/32: RNCC: 5 | RNVC: 2
TVA5120-2-263-038-1.1.4: RNCC: 5 | RNVC: 2
TS 1324: RNCC: 5 | RNVC: 2
A 57413: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-322-3213
Socket Wrench

123223213
03.364.20.02.0: RNCC: 3 | RNVC: 2
03.364.20.02.0: RNCC: 5 | RNVC: 9

10 Aug 1990

5120-12-381-7048
Torque Wrench Adapter

123817048
901C990000.010.0: RNCC: 2 | RNVC: 2
901C990000.010.0: RNCC: 3 | RNVC: 2

19 Mar 2010

5120-12-392-4313
Driftpin

123924313
6000062-990000.003.0: RNCC: 3 | RNVC: 2

6 Jun 2013

5120-12-091-3567

5120-12-091-3483

5120-12-323-9522
Inspection Mirror

123239522
470: RNCC: 3 | RNVC: 2

10 Jan 1991

5120-12-093-7596

5120-12-149-5302
Spanner Wrench

121495302
7743J: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-362-0056
Hand Material Handling Hook

123620056
029153401: RNCC: 3 | RNVC: 2

16 Dec 2003

5120-12-387-3464
Seal Inserter

123873464
80996040045: RNCC: 3 | RNVC: 2
80.99604-0045: RNCC: 5 | RNVC: 2

30 Nov 2011

5120-12-330-0308
Mechanical Puller

123300308
9891198: RNCC: 3 | RNVC: 9
9 891 198: RNCC: 5 | RNVC: 9

23 Oct 1992

5120-12-356-7424
Bearing And Bushing Inserter Set

123567424
T-071-L: RNCC: 3 | RNVC: 2

28 Mar 2002

5120-12-173-6309
Spanner Wrench

121736309
532008G16W6-2: RNCC: 3 | RNVC: 2
532008G16W6-2: RNCC: 5 | RNVC: 2
532008G16W6-2: RNCC: 5 | RNVC: 9
532008G16W6-2: RNCC: 5 | RNVC: 9

26 Apr 1978

5120-12-195-0977
Pedal Adjustment Tool Compressor

121950977
2585-1: RNCC: 3 | RNVC: 2
3049A: RNCC: 3 | RNVC: 2

12 Jan 1983

5120-12-379-0770
Screwdriver Bit

123790770
D0117781-001: RNCC: 3 | RNVC: 2
D0117781 000: RNCC: 5 | RNVC: 2

22 Jun 2009

5120-12-328-1574
Bearing And Bushing Inserter

123281574
410 000 0 3: RNCC: 3 | RNVC: 9
410000203: RNCC: 5 | RNVC: 9
A804000216: RNCC: 5 | RNVC: 9
TK-BA35-5180-467-2: RNCC: 5 | RNVC: 9
410 0002 0 3: RNCC: 5 | RNVC: 9
410000203: RNCC: 5 | RNVC: 9
A804000216: RNCC: 5 | RNVC: 9

11 Apr 1992

5120-12-318-9502
Socket Wrench Socket

123189502
NM295-17: RNCC: 3 | RNVC: 2
NM295-17: RNCC: 5 | RNVC: 9

28 Aug 1989

5120-12-181-2297
Magnet

121812297
116589066300: RNCC: 3 | RNVC: 2
1165890663/00: RNCC: 3 | RNVC: 2

5 Nov 1979

5120-12-385-3966
Mounting Lever

123853966
6458154: RNCC: 3 | RNVC: 2

30 May 2011

5120-12-368-7949
Socket Wrench Socket

123687949
770-LT12: RNCC: 3 | RNVC: 2
00.49.02.52: RNCC: 5 | RNVC: 2

20 Apr 2006

5120-12-335-2205
Mechanical Puller

123352205
4/9092/0149/0: RNCC: 3 | RNVC: 2
4/9092/0149/0: RNCC: 5 | RNVC: 9
4/9092/0149/0: RNCC: 5 | RNVC: 9

27 Jul 1994

5120-12-349-0144
Fixed Open End Wrench Set

123490144
VDE894-7T: RNCC: 3 | RNVC: 2

14 Sep 1999

5120-12-159-5104
Torque Wrench

121595104
NO PRIMARY REF 12-159-5104: RNCC: 3 | RNVC: 2
51020012: RNCC: 5 | RNVC: 9
77-12: RNCC: 5 | RNVC: 9
85-600-9935: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-318-9201
Inspection Mirror

123189201
D-16.1.1.: RNCC: 3 | RNVC: 9
D916.1.1.: RNCC: 5 | RNVC: 2
OSE D-16.1.1.: RNCC: 5 | RNVC: 2

24 Aug 1989

5120-12-179-2017
Justierschluessel

121792017
2-245: RNCC: 3 | RNVC: 2

15 Jun 1979

5120-12-375-2651
Flat Tip Screwdriver

123752651
BE-8360: RNCC: 3 | RNVC: 2
07314151838676: RNCC: 5 | RNVC: 2
34 2549: RNCC: 5 | RNVC: 2
6883 1111-060: RNCC: 5 | RNVC: 2
7314151838676: RNCC: 5 | RNVC: 9

13 May 2008

5120-12-308-7391
Socket Head Screw Key Set

123087391
NO PRIMARY REF 12-308-7391: RNCC: 3 | RNVC: 2
105959: RNCC: 5 | RNVC: 9
1059590: RNCC: 5 | RNVC: 9
1997MB11T: RNCC: 5 | RNVC: 9
1997MB12T: RNCC: 5 | RNVC: 9

12 Nov 1986

5120-12-384-8698
Scratch Awl

123848698
50.000.007: RNCC: 3 | RNVC: 2

6 Apr 2011

5120-12-323-0976
Pliers

123230976
2201-180: RNCC: 3 | RNVC: 2
DIN5257-A180: RNCC: 4 | RNVC: 1

23 Oct 1990

5120-12-313-9286
Torque Wrench Adapter

123139286
8791-13: RNCC: 3 | RNVC: 2
771023: RNCC: 5 | RNVC: 9

20 May 1988

5120-12-358-8988
Socket Wrench Screwdriver Attachment Set

123588988
96593432: RNCC: 3 | RNVC: 2

26 Nov 2002

5120-12-377-4371
Pull And Press Tool

123774371
F6374260: RNCC: 3 | RNVC: 2
F6374260: RNCC: 5 | RNVC: 2

15 Jan 2009

5120-12-373-4197
Cross Tip Screwdriver

123734197
66372: RNCC: 3 | RNVC: 2
4001002663725: RNCC: 5 | RNVC: 2

30 Oct 2007

5120-12-351-9565
Socket Head Screw Key

123519565
ISO2936-4: RNCC: 2 | RNVC: 2
201-004: RNCC: 3 | RNVC: 2
5200.102.080.038: RNCC: 5 | RNVC: 9

20 Sep 2000

5120-12-368-6371
Seal Inserter

123686371
312124: RNCC: 3 | RNVC: 2
0855-03-34-00/35: RNCC: 5 | RNVC: 2

3 Apr 2006

5120-12-149-9857
Torque Wrench

121499857
NO PRIMARY REF 12-149-9857: RNCC: 3 | RNVC: 2
171263: RNCC: 5 | RNVC: 9
6851M: RNCC: 5 | RNVC: 9
6851N: RNCC: 5 | RNVC: 9
130499: RNCC: 5 | RNVC: 9
6851F: RNCC: 5 | RNVC: 9
5120-40342: RNCC: 6 | RNVC: 9
5120-40340: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-369-7315
Socket Wrench Handle Bar

123697315
F 002 H30 005: RNCC: 3 | RNVC: 2
F 002 H30 005: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-150-4476
Montagevorrichtung

121504476
838589045900: RNCC: 3 | RNVC: 2
8385890459: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-361-1515
Montierhuelse

123611515
4085043: RNCC: 3 | RNVC: 2

28 Aug 2003

5120-12-377-2057
Timber Wedge

123772057
061686: RNCC: 3 | RNVC: 2

17 Dec 2008

5120-12-364-3415
Spanner Wrench

123643415
0003-0508-030: RNCC: 3 | RNVC: 2

11 Sep 2004

5120-12-357-7131
Drift Punch

123577131
8375891343: RNCC: 3 | RNVC: 2

15 Jul 2002

5120-12-044-6373

5120-12-155-9417
Socket Wrench Handle Bar

121559417
NM212-06: RNCC: 3 | RNVC: 2
NM212-06: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-191-3585
Hand Tube Flaring Punch

121913585
MOS-L 6-L: RNCC: 3 | RNVC: 2
C 5791 523 CD: RNCC: 5 | RNVC: 2
C 5791 523 CD: RNCC: 5 | RNVC: 2
C5791523CD: RNCC: 5 | RNVC: 2
MOS-I 6-L: RNCC: 5 | RNVC: 9
C5791523CD: RNCC: 5 | RNVC: 9

26 Jan 1982

5120-12-314-0564
Spanner Wrench

123140564
009-153.102-000W1: RNCC: 2 | RNVC: 2
009-153.102-000W1: RNCC: 3 | RNVC: 2

2 Jun 1988

5120-12-167-9694
Spanner Wrench

121679694
335914-9007.000: RNCC: 2 | RNVC: 2
335914-9007.000: RNCC: 3 | RNVC: 2
1255-35000W3: RNCC: 5 | RNVC: 2
335914-9007.000: RNCC: 5 | RNVC: 9
1255-35000W3: RNCC: 5 | RNVC: 9
335914-9007.000: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-126-7213
Craftsman's Tweezers

121267213
9205-90-S: RNCC: 3 | RNVC: 2
108620: RNCC: 5 | RNVC: 9
5474: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-187-4781
Socket Wrench Socket

121874781
D19-1/2W: RNCC: 3 | RNVC: 2
40750207: RNCC: 3 | RNVC: 2
50-12-BSW1/2: RNCC: 3 | RNVC: 2
TVA5120-2-5-532: RNCC: 5 | RNVC: 1
00050070983: RNCC: 5 | RNVC: 2
TVA5120-2-264-14L-12,5X1/2BSW: RNCC: 5 | RNVC: 2
TVA5120-2-5-532/12,5X1/2BSW: RNCC: 5 | RNVC: 2
900WZ1-2: RNCC: 5 | RNVC: 9
900WZ1/2: RNCC: 5 | RNVC: 9
50E1/2: RNCC: 5 | RNVC: 9

8 Apr 1981

5120-12-365-9736
Box Wrench

123659736
41071011-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-044-4923

5120-12-369-8141
Seal Inserter

123698141
405589011400: RNCC: 3 | RNVC: 2
7083639: RNCC: 5 | RNVC: 2

17 Aug 2006

5120-12-129-8777
Mechanical Puller

121298777
0681300002: RNCC: 3 | RNVC: 2
EFAL16: RNCC: 5 | RNVC: 2
KDAL5490: RNCC: 5 | RNVC: 9
0681300002: RNCC: 5 | RNVC: 9
EFAL16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-186-7312
Bearing And Bushing Inserter

121867312
99374003: RNCC: 3 | RNVC: 2
410230: RNCC: 5 | RNVC: 9
410230: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-140-5832
Schluessel

121405832
531-162: RNCC: 3 | RNVC: 2
T11531-162: RNCC: 5 | RNVC: 2
T11531-162: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-353-6732
Open End Box Wrench

123536732
400-12X14: RNCC: 3 | RNVC: 2
605743: RNCC: 5 | RNVC: 2

25 Apr 2001

5120-12-196-7530
Spanner Wrench

121967530
KDEP2970: RNCC: 3 | RNVC: 2
550589445900: RNCC: 3 | RNVC: 2
5505894459-00: RNCC: 5 | RNVC: 2
5505894459/00: RNCC: 5 | RNVC: 2
0535346: RNCC: 5 | RNVC: 2
535346: RNCC: 5 | RNVC: 9

10 Aug 1983

5120-12-150-3923
L Eindrueck- Huelse

121503923
1X46914914: RNCC: 3 | RNVC: 2
V91491-4: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-365-7821
Craftsman's Tweezers

123657821
T2336: RNCC: 3 | RNVC: 2

2 Feb 2005

5120-12-126-5536
Flat Tip Screwdriver

30 May 1969

5120-12-364-9913
Craftsman's Tweezers

123649913
5-117-1: RNCC: 3 | RNVC: 2

20 Nov 2004

5120-12-328-4262
Pin Inserter

123284262
F361130373243: RNCC: 3 | RNVC: 2
F30373243: RNCC: 5 | RNVC: 2

16 May 1992

5120-12-044-4936

5120-12-700-7763
Torque Wrench

127007763
VG95211-ML-127007763: RNCC: 2 | RNVC: 2
7810.053: RNCC: 3 | RNVC: 2
BPSNR 29061: RNCC: 5 | RNVC: 2

4 Feb 1993

5120-12-388-4822
Mechanical Puller Attachment

123884822
1X56 122 205: RNCC: 3 | RNVC: 2

26 Mar 2012

5120-12-198-5680
Mechanisch Stuetze

121985680
52-59200-2: RNCC: 3 | RNVC: 2

9 Feb 1984

5120-12-368-4351
Socket Wrench Socket

123684351
850LG-10: RNCC: 3 | RNVC: 2

9 Mar 2006

5120-12-310-8765
Wuergezangenteil

123108765
B3-1315: RNCC: 3 | RNVC: 2

3 Jul 1987

5120-12-120-6665
Socket Wrench Socket

121206665
A6700DZ-3/8: RNCC: 3 | RNVC: 2
175161: RNCC: 5 | RNVC: 2
133035: RNCC: 5 | RNVC: 2
6700DZ3-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-342-6692
Bearing And Bushing Inserter

123426692
18781 24253: RNCC: 2 | RNVC: 2
1878124253: RNCC: 3 | RNVC: 2
18781 24253: RNCC: 5 | RNVC: 9

13 Mar 1997

5120-12-155-8260
Mechanical Puller

121558260
4526-1: RNCC: 3 | RNVC: 2
12-1: RNCC: 3 | RNVC: 2
108177: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-314-2325
Boerdelwer Einsatz

123142325
4597-51-A1/4: RNCC: 3 | RNVC: 2
1651A/1/4: RNCC: 3 | RNVC: 2
569925: RNCC: 5 | RNVC: 2
68440016: RNCC: 5 | RNVC: 2
1651A1/4": RNCC: 5 | RNVC: 9

17 Jun 1988

5120-12-312-2174
Aligning Punch

123122174
VW521: RNCC: 3 | RNVC: 2

4 Dec 1987

5120-12-370-9260
Cross Tip Screwdriver

123709260
113PH2: RNCC: 3 | RNVC: 2
01.72.38.69: RNCC: 5 | RNVC: 2
11306: RNCC: 5 | RNVC: 2
4001002113060: RNCC: 5 | RNVC: 2

17 Jan 2007

5120-12-376-8325
Cross Tip Screwdriver

123768325
63804: RNCC: 3 | RNVC: 2
4001002638044: RNCC: 5 | RNVC: 2

11 Nov 2008

5120-12-351-8135
Torque Wrench Adapter

123518135
91541874: RNCC: 3 | RNVC: 2

29 Aug 2000

5120-12-171-5725
Abziehvorrichtung

121715725
1X56134511: RNCC: 3 | RNVC: 2

26 Oct 1977

5120-12-140-1158

5120-12-130-6346
Socket Wrench Socket

121306346
55DWN30: RNCC: 3 | RNVC: 2
90200: RNCC: 5 | RNVC: 2
55DWN30: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-343-6376
Plier Clamp

123436376
651402: RNCC: 3 | RNVC: 2

10 Jul 1997

5120-12-126-4638

5120-12-382-7527
Flat Tip Screwdriver

123827527
46601035-TCS: RNCC: 3 | RNVC: 2

4 Aug 2010

5120-12-394-6145
Torque Wrench

123946145
13578: RNCC: 3 | RNVC: 2

18 Dec 2013

5120-12-172-9073
Inspection Mirror

121729073
NO PRIMARY REF 12-172-9073: RNCC: 3 | RNVC: 2
6796: RNCC: 5 | RNVC: 9
67970: RNCC: 5 | RNVC: 9

2 Mar 1978

5120-12-161-0094
Seal Inserter

121610094
510306-0000.08: RNCC: 2 | RNVC: 2
510306-0000.08: RNCC: 5 | RNVC: 2
510306-0000-08: RNCC: 5 | RNVC: 9
510306-0000-08: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-3831
Shovel Handle

121263831
DIN20152-950-BY-ES: RNCC: 2 | RNVC: 2
DIN20152-BY-950-ES: RNCC: 5 | RNVC: 2
BY-950DIN20152-ES: RNCC: 5 | RNVC: 9
BY950DIN20152ESCHE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-3647
Socket Wrench Screwdriver Attachment

123713647
3510-IN 6: RNCC: 3 | RNVC: 2
00.47.20.64: RNCC: 5 | RNVC: 2

20 Mar 2007

5120-12-170-8005
Socket Head Screw Key

121708005
5100069-001000: RNCC: 3 | RNVC: 2
5100069-001000: RNCC: 5 | RNVC: 2
109612U: RNCC: 5 | RNVC: 9

11 Aug 1977

5120-12-303-5233
Pliers

123035233
215382: RNCC: 3 | RNVC: 2
215-382: RNCC: 5 | RNVC: 2

29 Mar 1985

5120-12-341-1596
Screwdriver Bit

123411596
IS20-6,5: RNCC: 3 | RNVC: 2

2 Aug 1996

5120-12-123-5555
Combination Box And Open End Wrench

121235555
1B41: RNCC: 3 | RNVC: 2
1952M41: RNCC: 3 | RNVC: 2
105743: RNCC: 5 | RNVC: 2
BL41DIN3113: RNCC: 5 | RNVC: 2
DIN3113-BL41: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-374-6639
Mechanical Puller

123746639
5075891233/00: RNCC: 3 | RNVC: 2

5 Mar 2008

5120-12-389-3627
Pedal Adjustment Tool Compressor

123893627
KL-9001-11: RNCC: 3 | RNVC: 2

26 Jun 2012

5120-12-361-4666
Torque Wrench

123614666
JD285005732: RNCC: 3 | RNVC: 2
5120-01262: RNCC: 6 | RNVC: 9

6 Oct 2003

5120-12-332-7077
Mechanical Puller

123327077
3-ARM-ABZ: RNCC: 3 | RNVC: 2

9 Sep 1993

5120-12-168-5894
Montagevorrichtung

121685894
IR915104: RNCC: 3 | RNVC: 2

23 Mar 1977

5120-12-126-5446
Mechanical Puller

121265446
355589003300: RNCC: 3 | RNVC: 2
3155890033: RNCC: 5 | RNVC: 2
315589003300: RNCC: 5 | RNVC: 2
3155890033: RNCC: 5 | RNVC: 9
315589003300: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-3454
Ratchet Wrench

123643454
41130910-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-044-4917

5120-12-312-9136
Preformed Packing Inserter

123129136
KDEP 2876: RNCC: 3 | RNVC: 2

18 Feb 1988

5120-12-368-1010
Pliers

123681010
65017180-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-358-4160
Combination Box And Open End Wrench Set

123584160
71330140: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-12-126-5423
Spanner Wrench

121265423
4015890007: RNCC: 3 | RNVC: 2
4015890007: RNCC: 3 | RNVC: 9
401589000700: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5242
Box Wrench

121235242
DIN837-A27X32: RNCC: 2 | RNVC: 2
000837027001: RNCC: 3 | RNVC: 2
A27X32DIN837: RNCC: 5 | RNVC: 2
A27X32DIN837GALNI8: RNCC: 5 | RNVC: 9
22-27X32: RNCC: 5 | RNVC: 9
41062732: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-3374
Face Spanner Wrench Socket

121773374
2300002-268030.000: RNCC: 2 | RNVC: 2
2300002-268030.000: RNCC: 3 | RNVC: 2
2300002-268030: RNCC: 5 | RNVC: 9

29 Jan 1979

5120-12-371-2311
Mechan Adaptersatz

123712311
1.81/1: RNCC: 3 | RNVC: 2
1120727: RNCC: 5 | RNVC: 2
4036976106541: RNCC: 5 | RNVC: 2

2 Mar 2007

5120-12-182-4166
Flat Tip Screwdriver

121824166
8020-1-2-8X40: RNCC: 3 | RNVC: 2

30 Jan 1980

5120-12-179-7307
Stuetze

121797307
5900063-211000.00: RNCC: 2 | RNVC: 2
5900063-211000.00: RNCC: 3 | RNVC: 2
5900063-211000-00: RNCC: 5 | RNVC: 2

25 Jul 1979

5120-12-336-5206
Bearing And Bushing Remover

123365206
2-866-46583: RNCC: 3 | RNVC: 2
2-866-46583: RNCC: 5 | RNVC: 2

22 Nov 1994

5120-12-354-7174
Torque Wrench

123547174
760/7,5: RNCC: 3 | RNVC: 2
5120-01122: RNCC: 6 | RNVC: 9

17 Aug 2001

5120-12-123-5058
Open End Wrench

121235058
200-20X22: RNCC: 3 | RNVC: 2
620-20X22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-8964
Spade Bracket

123888964
1004085: RNCC: 3 | RNVC: 2
4615800122: RNCC: 5 | RNVC: 2
SK913-053070.000.0: RNCC: 5 | RNVC: 2

3 May 2012

5120-12-333-5871
Spanner Wrench

123335871
844602364: RNCC: 3 | RNVC: 2

10 Jan 1994

5120-12-391-3261
Plug Electrical Connector Extractor

123913261
1551: RNCC: 3 | RNVC: 2
74620001: RNCC: 5 | RNVC: 2

6 Mar 2013

5120-12-092-2265

5120-12-377-1182
Quick Adjusting Screw Clamp

123771182
STB100M: RNCC: 3 | RNVC: 2

11 Dec 2008

5120-12-090-1793

5120-12-300-8570
Mechanical Puller Attachment

123008570
F7722: RNCC: 3 | RNVC: 2

5 Sep 1984

5120-12-325-8121
Seal Inserter

123258121
5870055056: RNCC: 3 | RNVC: 2
790511177: RNCC: 5 | RNVC: 2
5870 055 056: RNCC: 5 | RNVC: 9
5870055056: RNCC: 5 | RNVC: 9

12 Jul 1991

5120-12-390-1206
Bearing And Bushing Inserter

123901206
405589121500: RNCC: 3 | RNVC: 2

8 Oct 2012

5120-12-334-0258
Open End Wrench

123340258
DIN895-13X16: RNCC: 2 | RNVC: 2
895-13X16: RNCC: 3 | RNVC: 2
658022: RNCC: 5 | RNVC: 2

10 Mar 1994

5120-12-177-2180
Socket Wrench Socket

121772180
50A13-32: RNCC: 3 | RNVC: 2
D19-13-32AF: RNCC: 3 | RNVC: 2
03410026: RNCC: 5 | RNVC: 9

19 Jan 1979

5120-12-156-1567
Socket Wrench Socket

121561567
NM293-09: RNCC: 3 | RNVC: 2
NM293-09: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-5072
Electrical Contact Inserter And Remover

123125072
01395: RNCC: 3 | RNVC: 2
0139501: RNCC: 5 | RNVC: 2

13 Jan 1988

5120-12-347-3259
Seal Inserter

123473259
21-159: RNCC: 3 | RNVC: 2

26 Nov 1998

5120-12-309-5571
Bearing And Bushing Inserter

123095571
604-45.12.121-19E: RNCC: 3 | RNVC: 2

4 Feb 1987

5120-12-362-1462
Socket Head Screw Key

123621462
334-7,0X200: RNCC: 3 | RNVC: 2
00926: RNCC: 5 | RNVC: 2

14 Jan 2004

5120-12-369-4210
Fixed Open End Wrench Set

123694210
0986612247: RNCC: 3 | RNVC: 2
0 986 612 247: RNCC: 5 | RNVC: 2

3 Jul 2006

5120-12-325-1313
Mechanical Puller Step Plate

123251313
1000173-992000.004.0: RNCC: 2 | RNVC: 2
1000173-992000.004.0: RNCC: 3 | RNVC: 2

7 May 1991

5120-12-371-0688
Screwdriver Handle

123710688
4-775: RNCC: 3 | RNVC: 2

5 Feb 2007

5120-12-342-1458
Electronic Equipment Alignment Tool

123421458
1-335: RNCC: 3 | RNVC: 2

18 Dec 1996

5120-12-147-9413
Hand Shovel

121479413
H814-108-09: RNCC: 3 | RNVC: 2
48625: RNCC: 5 | RNVC: 2
F819-55-07: RNCC: 5 | RNVC: 9
F814-148-07: RNCC: 5 | RNVC: 9
5120-11270: RNCC: 6 | RNVC: 9
5120-11270: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-364-5495
Socket Wrench Extension

123645495
12040000-TCS: RNCC: 3 | RNVC: 2

8 Oct 2004

5120-12-362-5252
Rivet Bucking Bar

123625252
417002: RNCC: 3 | RNVC: 2

4 Mar 2004

5120-12-167-2887
Flat Tip Screwdriver

121672887
NO PRIMARY REF 12-167-2887: RNCC: 3 | RNVC: 2
1148P4-5: RNCC: 5 | RNVC: 9
254193: RNCC: 5 | RNVC: 9

8 Dec 1976

5120-12-330-0372
Elektron Auszieher

123300372
TW2000-22: RNCC: 3 | RNVC: 2
T2375-4: RNCC: 3 | RNVC: 2
TW2000-22: RNCC: 5 | RNVC: 2

24 Oct 1992

5120-12-126-2136
Flat Tip Screwdriver

121262136
C8000-4.5-150: RNCC: 3 | RNVC: 2
1100391: RNCC: 5 | RNVC: 2
C8000-0-6X4-5X150: RNCC: 5 | RNVC: 2
110039: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-343-1052
Swivel Knob Jeweler's Screwdriver

123431052
240 151 90: RNCC: 3 | RNVC: 2

29 Apr 1997

5120-12-365-5401
Flat Tip Screwdriver

123655401
47211065-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-315-5594
Mechanical Puller

123155594
0851 9654: RNCC: 3 | RNVC: 2

8 Nov 1988

5120-12-385-3087
Hand Hammer

123853087
53.000.026: RNCC: 3 | RNVC: 2
53.000.026: RNCC: 5 | RNVC: 2

20 May 2011

5120-12-126-5437
Vors Steck- Gabel

121265437
4015890123: RNCC: 3 | RNVC: 2
4015890123: RNCC: 3 | RNVC: 9
401589012300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-042-5960

5120-12-155-7630
Kartenzieher

121557630
NO PRIMARY REF 12-155-7630: RNCC: 3 | RNVC: 2
66-3501-880-01: RNCC: 5 | RNVC: 2
5801172-72-001: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-139-8583
Abziehvorrichtung

121398583
3125892033: RNCC: 3 | RNVC: 2
312589203300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-155-9495
Socket Wrench

121559495
NM393-04: RNCC: 3 | RNVC: 2
NM393-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-167-1559
Einfuehrungsrohr

121671559
14021-12002W2: RNCC: 3 | RNVC: 2

25 Nov 1976

5120-12-002-1794

5120-12-365-0117
Socket Head Screw Key

123650117
6-635: RNCC: 3 | RNVC: 2

23 Nov 2004

5120-12-364-3463
Combination Box And Open End Wrench

123643463
40085500-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-385-7234
Hand Terminal Crimping Tool

123857234
K94: RNCC: 3 | RNVC: 2

4 Jul 2011

5120-12-314-1130
Box Wrench

123141130
4201010: RNCC: 3 | RNVC: 2

8 Jun 1988

5120-12-126-5487
Abzieher Haken

121265487
3045891633: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-349-0142
Flat Tip Screwdriver Set

123490142
8000-8T: RNCC: 3 | RNVC: 2

14 Sep 1999

5120-12-308-1621
Gewindeein Spindel

123081621
01500608320: RNCC: 3 | RNVC: 2
0150 0608 320: RNCC: 5 | RNVC: 2

9 Sep 1986

5120-12-354-0313
Piston Ring Expander

123540313
000589373700: RNCC: 3 | RNVC: 2
000 589 37 37 00: RNCC: 5 | RNVC: 2

29 May 2001

5120-12-189-9729
Driftpin

121899729
WU129: RNCC: 3 | RNVC: 2
99363240: RNCC: 3 | RNVC: 2
410270: RNCC: 5 | RNVC: 9
410270: RNCC: 5 | RNVC: 9

29 Oct 1981

5120-12-186-7350
Einstell Schluessel

121867350
99356001: RNCC: 3 | RNVC: 2
410420: RNCC: 5 | RNVC: 9
410420: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-023-2545

5120-12-070-0195

5120-12-387-6138
Pliers

123876138
3-732-13: RNCC: 3 | RNVC: 2

16 Jan 2012

5120-12-311-4878
Spanner Wrench

123114878
AFG0457135: RNCC: 3 | RNVC: 2
AFG-17-10-00-04-01: RNCC: 5 | RNVC: 9

9 Sep 1987

5120-12-364-7242
Spring Inserter And Remover

123647242
112589096100: RNCC: 3 | RNVC: 2

22 Oct 2004

5120-12-391-0634
Bearing And Bushing Remover

123910634
F6781536: RNCC: 3 | RNVC: 2

22 Jan 2013

5120-12-163-6089
Abdrueckvorrichtung

121636089
105-31702W1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-325-9022
Combination Box And Open End Wrench

123259022
2060090: RNCC: 3 | RNVC: 2

22 Jul 1991

5120-12-381-9811
Mechanical Puller Adapter

123819811
BW-SMXT3-43-89: RNCC: 3 | RNVC: 2

23 Apr 2010

5120-12-133-5942
Open End Wrench

121335942
NO PRIMARY REF 12-133-5942: RNCC: 3 | RNVC: 2
610A52: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-2809
A Haltevorrichtung

121272809
WU64: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-354-8818
Seal Inserter

123548818
1X54 183 744: RNCC: 3 | RNVC: 2
15006270: RNCC: 5 | RNVC: 2

31 Aug 2001

5120-12-141-3645
Mechanical Puller

121413645
4015890933: RNCC: 3 | RNVC: 2
4015890933: RNCC: 3 | RNVC: 9
401589093300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-362-5498
Mechanical Puller

123625498
613 589 00 33 00: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-12-363-3288
Seil Haltewerkzeug

123633288
B00078: RNCC: 3 | RNVC: 2

27 May 2004

5120-12-370-4154
Flat Tip And Cross Tip Screwdriver Set

123704154
96838116: RNCC: 3 | RNVC: 2

6 Nov 2006

5120-12-330-3650
Bearing And Bushing Inserter

123303650
2653-990980.01: RNCC: 2 | RNVC: 2
2653-990980.01: RNCC: 3 | RNVC: 2

8 Dec 1992

5120-12-335-9625
Seal Inserter

123359625
0851 4502: RNCC: 3 | RNVC: 2
8514502: RNCC: 5 | RNVC: 2

6 Oct 1994

5120-12-139-3011

5120-12-390-2381
Special Purpose Combination Wrench

123902381
4W770A: RNCC: 3 | RNVC: 2

19 Oct 2012

5120-12-190-7763
Abziehvorrichtung

121907763
61814002: RNCC: 3 | RNVC: 2
618 140 00: RNCC: 5 | RNVC: 9
61814000: RNCC: 5 | RNVC: 9

14 Dec 1981

5120-12-375-2811
Concrete Corner Tool

123752811
888 100 00: RNCC: 3 | RNVC: 2
888 100: RNCC: 5 | RNVC: 2

14 May 2008

5120-12-166-0362

5120-12-321-9862
Driftpin

123219862
790520677: RNCC: 3 | RNVC: 2
3201-750.07.00.061-000: RNCC: 5 | RNVC: 2

16 Jul 1990

5120-12-303-3137
Ku Montierwerkzeug

123033137
02-020-010: RNCC: 3 | RNVC: 2
606589002300: RNCC: 5 | RNVC: 2

13 Mar 1985

5120-12-346-7388
Socket Wrench Socket

123467388
466-16: RNCC: 3 | RNVC: 2
02120016: RNCC: 5 | RNVC: 2

2 Sep 1998

5120-12-327-6352
Spanner Wrench

123276352
450900-1057: RNCC: 3 | RNVC: 2

11 Feb 1992

5120-12-329-3300
Hand Bellows

123293300
27.690: RNCC: 3 | RNVC: 2

6 Aug 1992

5120-12-342-1967
Okular Zange

123421967
5511300: RNCC: 3 | RNVC: 2

2 Jan 1997

5120-12-320-0433
Hand Beading Tool

123200433
4987046: RNCC: 3 | RNVC: 2

30 Nov 1989

5120-12-322-6463
Mechanical Puller

123226463
99347038: RNCC: 3 | RNVC: 2
A347038: RNCC: 5 | RNVC: 9

10 Sep 1990

5120-12-300-8571
Mechanical Puller Attachment

123008571
A28355: RNCC: 3 | RNVC: 2

5 Sep 1984

5120-12-355-3429
Pliers

123553429
0005810554: RNCC: 3 | RNVC: 2
A0005810554: RNCC: 5 | RNVC: 9

6 Nov 2001

5120-12-133-4642

5120-12-123-5605

5120-12-359-3069
Torque Wrench

123593069
IZO-I-100: RNCC: 3 | RNVC: 2
1839659: RNCC: 5 | RNVC: 2

21 Jan 2003

5120-12-195-6839
Combination Box And Open End Wrench

121956839
NO PRIMARY REF 12-195-6839: RNCC: 3 | RNVC: 2
1952E-5/8: RNCC: 5 | RNVC: 9

28 Mar 1983

5120-12-164-8837
Schluessel

121648837
11108903401: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-133-4478
Socket Wrench

121334478
027M01000: RNCC: 3 | RNVC: 2
5185890409: RNCC: 3 | RNVC: 2
518589040900: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-044-5043

5120-12-021-2683

5120-12-343-8453
Bearing And Bushing Inserter

123438453
1434102100: RNCC: 3 | RNVC: 2

5 Aug 1997

5120-12-134-2683
Schluessel

121342683
029M00300: RNCC: 3 | RNVC: 2
VM76074: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-133-3711

5120-12-147-1859
Druck Abziehbuegel

121471859
3045892533: RNCC: 3 | RNVC: 2
304589253300: RNCC: 5 | RNVC: 2
304589253300: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-6875
Abziehschraube

121816875
VW202: RNCC: 3 | RNVC: 9

10 Dec 1979

5120-12-365-9161
Swivel Knob Jeweler's Screwdriver

123659161
T4877X 08: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-181-6866
Slip Joint Pliers

121816866
2479: RNCC: 3 | RNVC: 9
042E005: RNCC: 5 | RNVC: 9
2568: RNCC: 5 | RNVC: 9
106502: RNCC: 5 | RNVC: 9

10 Dec 1979

5120-12-378-8253
Rotat Holding Tool

123788253
F70147736: RNCC: 3 | RNVC: 2

15 May 2009

5120-12-374-3745
Combination Box And Open End Wrench

123743745
40083636-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-338-0544
Gl Montierwerkzeug

123380544
7129131500: RNCC: 3 | RNVC: 2

16 May 1995

5120-12-127-3986
Pliers

121273986
64030220300008: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-131-4640

5120-12-314-2784
Bearing And Bushing Inserter

123142784
0850 9916: RNCC: 3 | RNVC: 2
8509916: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-092-2248

5120-12-361-8260
Hand Hammer

123618260
429-20: RNCC: 3 | RNVC: 2
T4221 16: RNCC: 3 | RNVC: 2
8012410: RNCC: 5 | RNVC: 2

21 Nov 2003

5120-12-156-9168
Face Spanner Wrench Socket

121569168
CH3147-26: RNCC: 3 | RNVC: 2
560589020900: RNCC: 5 | RNVC: 2
CH3147-26: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-346-0802
Hand Tube Flaring Tool

123460802
150140: RNCC: 3 | RNVC: 2

8 Jun 1998

5120-12-305-4609
Fuse Puller

123054609
8022 UND 8029: RNCC: 3 | RNVC: 9
3NX1012: RNCC: 5 | RNVC: 9

8 Nov 1985

5120-12-387-9639
Seal Inserter

123879639
80996170148: RNCC: 3 | RNVC: 2
80.99617-0148: RNCC: 5 | RNVC: 2

13 Feb 2012

5120-12-324-4718
Drive Pin Punch

123244718
335910-0102.000: RNCC: 2 | RNVC: 2
335910-0102.000: RNCC: 3 | RNVC: 2
335910-0102.000: RNCC: 5 | RNVC: 9

20 Feb 1991

5120-12-358-4224
Spanner Wrench

123584224
2.72-38165: RNCC: 3 | RNVC: 2

17 Oct 2002

5120-12-144-6088
S Haltevorrichtung

121446088
837589153100: RNCC: 3 | RNVC: 2
8375891531: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-171-9951
Socket Wrench Socket

121719951
6300M5: RNCC: 3 | RNVC: 2
108761: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-171-5362
Spanner Wrench

121715362
1238W20: RNCC: 3 | RNVC: 2
1238W20: RNCC: 5 | RNVC: 2
1238W20: RNCC: 5 | RNVC: 9

21 Oct 1977

5120-12-123-4891
Sheet Metalworking Dolly Block

121234891
031A310: RNCC: 3 | RNVC: 2
3009: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-150-7590

5120-12-092-2291

5120-12-120-6795

5120-12-358-4059
Crimping Tool Die

123584059
974970: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-12-192-5614
Socket Wrench

121925614
0005813901: RNCC: 3 | RNVC: 2
939.20.110: RNCC: 5 | RNVC: 2
939.20.110: RNCC: 5 | RNVC: 9

5 May 1982

5120-12-181-5809
Einpreszwerkzeug

121815809
312589051500: RNCC: 3 | RNVC: 9

3 Dec 1979

5120-12-334-5211
Mechanical Puller Attachment

123345211
0852 0678.006: RNCC: 3 | RNVC: 2

19 May 1994

5120-12-359-3233
Automatic Center Punch

123593233
KT 2533 05001: RNCC: 3 | RNVC: 2

23 Jan 2003

5120-12-164-8068
Offset Screwdriver

121648068
2047-4X90: RNCC: 3 | RNVC: 2
106045: RNCC: 5 | RNVC: 2
2047-4: RNCC: 5 | RNVC: 2
2047-4X100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-8952

5120-12-365-9396
Socket Head Screw Key

123659396
40917605180: RNCC: 3 | RNVC: 2
A0005815501: RNCC: 3 | RNVC: 2

21 Feb 2005

5120-12-368-8752
Socket Wrench Socket

123688752
770-LTXE24: RNCC: 3 | RNVC: 2
00.50.48.04: RNCC: 5 | RNVC: 2

3 May 2006

5120-12-303-3990
Blindni Mundstueck

123033990
327 502: RNCC: 3 | RNVC: 2

20 Mar 1985

5120-12-194-1226
Torque Wrench

121941226
730AR/20: RNCC: 3 | RNVC: 2
001589672100: RNCC: 5 | RNVC: 9
9450 2020: RNCC: 5 | RNVC: 9

5 Oct 1982

5120-12-374-3560
Socket Wrench Socket

123743560
01140009-TCS: RNCC: 3 | RNVC: 2

11 Feb 2008

5120-12-319-7401
Spanner Wrench

123197401
01-04763: RNCC: 3 | RNVC: 2

30 Oct 1989

5120-12-378-9922
Pneumatic Tire Valve Core Inserter And Remover

123789922
GA1507-1: RNCC: 3 | RNVC: 2

10 Jun 2009

5120-12-181-8827
Hand Terminal Crimping Tool

121818827
WZ35: RNCC: 3 | RNVC: 2
620.823-5: RNCC: 5 | RNVC: 2
620823: RNCC: 5 | RNVC: 9

21 Dec 1979

5120-12-344-8109
Mechanical Puller Attachment

123448109
4521NE: RNCC: 3 | RNVC: 2
51-2: RNCC: 3 | RNVC: 2

11 Dec 1997

5120-12-322-1522
Mechan Druckstueck

123221522
2300223-264100.20.0: RNCC: 2 | RNVC: 2
2300223-264100.20.0: RNCC: 3 | RNVC: 2

27 Jul 1990

5120-12-318-0775
Flat Tip Screwdriver

123180775
04125: RNCC: 3 | RNVC: 9

8 Jun 1989

5120-12-091-4778

5120-12-011-3070

5120-12-150-3952
Dorn

121503952
837589164300: RNCC: 3 | RNVC: 2
8375891643: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-121-8251

5120-12-385-6101
Hous Mounting Tool

123856101
Y4272223: RNCC: 3 | RNVC: 2

21 Jun 2011

5120-12-325-6958
Mitnehmers Adapter

123256958
5105.020.08.02: RNCC: 3 | RNVC: 2
7820353141: RNCC: 5 | RNVC: 2
78203 53141: RNCC: 5 | RNVC: 9

1 Jul 1991

5120-12-353-1177
Abzieh- Und Aufdrue

123531177
CBD30144G01: RNCC: 3 | RNVC: 2

30 Jan 2001

5120-12-350-4798
Socket Head Screw Key

123504798
1668484: RNCC: 3 | RNVC: 2
1569973: RNCC: 5 | RNVC: 2

4 Apr 2000

5120-12-147-8904
Achsfedersp Huelse

121478904
5069580: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-389-5076
Torque Wrench Adapter

123895076
R819945: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-380-0604
Torque Wrench

123800604
03000996 4 03409684: RNCC: 3 | RNVC: 2
3136470: RNCC: 5 | RNVC: 2

23 Sep 2009

5120-12-312-1485
Socket Wrench

123121485
1087-441-006-01: RNCC: 3 | RNVC: 2

26 Nov 1987

5120-12-315-3794
Rotating Members Aligning Tool

123153794
4165.036.001.3: RNCC: 3 | RNVC: 2
0853 1236: RNCC: 5 | RNVC: 2
8531236: RNCC: 5 | RNVC: 9

18 Oct 1988

5120-12-126-1951
Machinist's Scriber

121261951
C1152A: RNCC: 3 | RNVC: 2
1036928: RNCC: 5 | RNVC: 2
103692: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-9003
Timber Wedge

123059003
0000 893 6802: RNCC: 3 | RNVC: 9

3 Jan 1986

5120-12-325-8122
Seal Inserter

123258122
5870055085: RNCC: 3 | RNVC: 2
790514377: RNCC: 5 | RNVC: 2
5870 055 085: RNCC: 5 | RNVC: 9
5870055085: RNCC: 5 | RNVC: 9

12 Jul 1991

5120-12-357-7356
Zentrier- Ring

123577356
F30275120: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-363-6248
Fixed Open End Wrench Set

123636248
1933M/6T: RNCC: 3 | RNVC: 2
7314151821654: RNCC: 5 | RNVC: 2

9 Jul 2004

5120-12-140-1059
Etching Needle

121401059
NO PRIMARY REF 12-140-1059: RNCC: 3 | RNVC: 2
670-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-2245
Brake Repair Pliers

121262245
45142131: RNCC: 3 | RNVC: 2
135-20: RNCC: 3 | RNVC: 2
2810N: RNCC: 5 | RNVC: 9
4412: RNCC: 5 | RNVC: 9
106833: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-4956
Mechanical Puller Attachment

121264956
4521I: RNCC: 3 | RNVC: 2
1X56122211: RNCC: 3 | RNVC: 2
21-9: RNCC: 3 | RNVC: 2
108156: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-392-6762
Carrier Socket

123926762
CTP40918G001: RNCC: 3 | RNVC: 2

27 Jun 2013

5120-12-181-5812
Einpreszwerkzeug

121815812
312589111500: RNCC: 3 | RNVC: 9

3 Dec 1979

5120-12-357-6297
Quick Adjusting Screw Clamp

123576297
F70095764: RNCC: 3 | RNVC: 2

8 Jul 2002

5120-12-181-1317
Socket Wrench Socket

121811317
1088-12: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-319-9803
Rivet Bucking Bar

123199803
601: RNCC: 3 | RNVC: 2

24 Nov 1989

5120-12-383-1873
Seal Inserter

123831873
F30274309: RNCC: 3 | RNVC: 2

23 Sep 2010

5120-12-391-4021
Socket Wrench

123914021
SSG19G: RNCC: 3 | RNVC: 2

11 Mar 2013

5120-12-126-1818

5120-12-374-4288
Wor Pressure Piece

123744288
2875MP80-04-1AY: RNCC: 3 | RNVC: 2

15 Feb 2008

5120-12-310-9441
Torque Wrench

123109441
72NM/1: RNCC: 3 | RNVC: 2
000589672100: RNCC: 5 | RNVC: 2
000 589 67 21 00: RNCC: 5 | RNVC: 2

10 Jul 1987

5120-12-312-3966
Spanner Wrench

123123966
KDEP2906: RNCC: 3 | RNVC: 2
KDEP 2906: RNCC: 5 | RNVC: 2

28 Dec 1987

5120-12-361-8934
Spaten Aufnahme

123618934
1030017-971040.00: RNCC: 3 | RNVC: 2

2 Dec 2003

5120-12-335-4096
Face Spanner Wrench Socket

123354096
0852 3002: RNCC: 3 | RNVC: 2
8523002: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-370-3836
Hand Terminal Crimping Tool

123703836
66346220: RNCC: 3 | RNVC: 2

31 Oct 2006

5120-12-332-5322
Bearing And Bushing Inserter

123325322
3253: RNCC: 3 | RNVC: 2

18 Aug 1993

5120-12-371-3416
Montierwerk Huelse

123713416
1Y-07-1-2: RNCC: 3 | RNVC: 2

19 Mar 2007

5120-12-130-7966
Dorn

121307966
NO PRIMARY REF 12-130-7966: RNCC: 3 | RNVC: 2
1977: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-378-0326
Vise Jaw Caps

123780326
879310-140: RNCC: 3 | RNVC: 2
879310-140: RNCC: 3 | RNVC: 2

6 Mar 2009

5120-12-390-5575
Spanner Wrench

123905575
2001542-5: RNCC: 3 | RNVC: 2
2001542-5: RNCC: 5 | RNVC: 2

23 Nov 2012

5120-12-171-4080
Spatula

121714080
5470-25: RNCC: 3 | RNVC: 9

7 Oct 1977

5120-12-123-4989
Hand Rivet Set

121234989
30644: RNCC: 3 | RNVC: 2
B10DIN6434: RNCC: 5 | RNVC: 9
DIN6434-B10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-338-6553
Hand Armament Subsystem Carrier

123386553
4900059-751600.003.0: RNCC: 3 | RNVC: 2

10 Aug 1995

5120-12-150-3925
S Haltevorrichtung

121503925
1X46914922: RNCC: 3 | RNVC: 2
V91492-2: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-168-4633
Re Einstell- Huelse

121684633
NO PRIMARY REF 12-168-4633: RNCC: 3 | RNVC: 2
2776025000: RNCC: 5 | RNVC: 9
2776025000: RNCC: 5 | RNVC: 9

15 Mar 1977

5120-12-341-0779
Bearing And Bushing Inserter

123410779
142610-4: RNCC: 3 | RNVC: 2

25 Jul 1996

5120-12-318-9088
Hand Tube Bender

123189088
0-14-000-000-40500: RNCC: 3 | RNVC: 2

24 Aug 1989

5120-12-151-9607
Spanner Wrench

121519607
DIN1810-B30-32: RNCC: 2 | RNVC: 2
30-32-1810Z: RNCC: 3 | RNVC: 2
B30-32DIN1810: RNCC: 5 | RNVC: 2
DIN1810B30-32: RNCC: 5 | RNVC: 2
DIN1810B30-32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-380-4020
Socket Wrench Socket

123804020
402-9: RNCC: 3 | RNVC: 2
01140009: RNCC: 5 | RNVC: 2

27 Oct 2009

5120-12-344-6003
Ge Montierwerkzeug

123446003
1X56136465: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-389-4306
Pliers Set

123894306
700100-3: RNCC: 3 | RNVC: 9

5 Jul 2012

5120-12-384-8639
Inserted Hammer Face

123848639
50.000.183: RNCC: 3 | RNVC: 2

5 Apr 2011

5120-12-341-6449
Fuse Puller

123416449
659001: RNCC: 3 | RNVC: 2
120012: RNCC: 3 | RNVC: 2

9 Oct 1996

5120-12-304-0571
Socket Wrench

123040571
0210 5955: RNCC: 3 | RNVC: 2
2105955: RNCC: 5 | RNVC: 2

4 Jun 1985

5120-12-354-7175
Torque Wrench

123547175
760/15: RNCC: 3 | RNVC: 2
5120-01112: RNCC: 6 | RNVC: 9

17 Aug 2001

5120-12-193-0666
Torque Wrench Adapter

121930666
TL5120-0086-040: RNCC: 2 | RNVC: 2
7452-7 10: RNCC: 5 | RNVC: 9
20/DC-10: RNCC: 5 | RNVC: 9
6263110004: RNCC: 5 | RNVC: 9
731/10 10: RNCC: 5 | RNVC: 9
6450C-10: RNCC: 5 | RNVC: 9
731-10-10: RNCC: 5 | RNVC: 9

16 Jun 1982

5120-12-182-0049
Schluessel

121820049
C39407-A20-A3: RNCC: 3 | RNVC: 2
C39407A20A3: RNCC: 5 | RNVC: 2

4 Jan 1980

5120-12-126-1563
Shovel Handle

121261563
NO PRIMARY REF 12-126-1563: RNCC: 3 | RNVC: 2
AY-1000DIN20152-ES: RNCC: 5 | RNVC: 9
AY1000DIN20152ES: RNCC: 5 | RNVC: 9
AY1000DIN20152ESCHE: RNCC: 5 | RNVC: 9
DIN20152-AY-1000-ES: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-386-1581
Socket Wrench Crowfoot Attachment

123861581
440-8: RNCC: 3 | RNVC: 2
01190008: RNCC: 5 | RNVC: 2

12 Aug 2011

5120-12-388-8554
Wire Stretcher

123888554
V-KT00Z17: RNCC: 3 | RNVC: 2

30 Apr 2012

5120-12-311-6960
Mechanical Puller

123116960
KDEP2886: RNCC: 3 | RNVC: 2
KDEP2886: RNCC: 5 | RNVC: 2

7 Oct 1987

5120-12-320-5618
Combination Box And Open End Wrench

123205618
16-3,5: RNCC: 3 | RNVC: 2
52036035: RNCC: 3 | RNVC: 2

26 Jan 1990

5120-12-357-6298
Montierhuelse

123576298
F6279905: RNCC: 3 | RNVC: 2

8 Jul 2002

5120-12-388-5836
Oil Filter Wrench

123885836
KRZXXZ550250000000: RNCC: 3 | RNVC: 2

3 Apr 2012

5120-12-304-2232
Socket Wrench

123042232
5801411-82: RNCC: 3 | RNVC: 2

27 Jun 1985

5120-12-385-2591
Hand-Operated Grommet And Eyelet Press

123852591
50.000.047: RNCC: 3 | RNVC: 2

13 May 2011

5120-12-363-6249
Craftsman's Tweezers

123636249
5497AM: RNCC: 3 | RNVC: 2
18121272: RNCC: 5 | RNVC: 2

9 Jul 2004

5120-12-364-9568
Swivel Knob Jeweler's Screwdriver

123649568
4877X ESD TX06X50: RNCC: 3 | RNVC: 2
T4877XESDTX06X50: RNCC: 5 | RNVC: 9

18 Nov 2004

5120-12-325-5382
Mechanical Puller

123255382
1111110001/2: RNCC: 3 | RNVC: 2

14 Jun 1991

5120-12-393-9083
Combination Box And Open End Wrench

123939083
2316358: RNCC: 3 | RNVC: 2
1 B 48: RNCC: 5 | RNVC: 2
2316358: RNCC: 5 | RNVC: 2
1 B 48: RNCC: 5 | RNVC: 2
4010886893173: RNCC: 5 | RNVC: 2
1B48: RNCC: 5 | RNVC: 2
4010886893173: RNCC: 5 | RNVC: 2

21 Oct 2013

5120-12-338-3918
Torque Wrench

123383918
6391-12: RNCC: 3 | RNVC: 2
6261420005: RNCC: 5 | RNVC: 2

3 Jul 1995

5120-12-140-9693
Zentriervorrichtung

121409693
0276138000: RNCC: 3 | RNVC: 2
0277004003: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-140-3882

5120-12-307-6382
Chain Type Ratchet Lever Puller

123076382
X323: RNCC: 2 | RNVC: 9
77158020: RNCC: 3 | RNVC: 9
T-ABC-30-47: RNCC: 5 | RNVC: 9
5120-21200: RNCC: 6 | RNVC: 9

10 Jul 1986

5120-12-151-8426
Einstell- Hebel

121518426
C20407-A106-A2: RNCC: 3 | RNVC: 2
C20407A106A2: RNCC: 5 | RNVC: 2
TFS49-98996: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-391-4166
Mechanical Puller Attachment

123914166
80996060565: RNCC: 3 | RNVC: 2
80.99606-0565: RNCC: 5 | RNVC: 2

11 Mar 2013

5120-12-144-4452
Kurbel

121444452
192-3-001663: RNCC: 3 | RNVC: 9
BB326239-5000-12: RNCC: 5 | RNVC: 9
5000-12: RNCC: 5 | RNVC: 9
192-3-000476: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-319-6373
Spanner Wrench

123196373
01-907.0: RNCC: 3 | RNVC: 2
701.907.0: RNCC: 5 | RNVC: 2

19 Oct 1989

5120-12-147-2083
Ketten- Winde

121472083
W1-3-37-4: RNCC: 3 | RNVC: 2
2376-9000-03: RNCC: 5 | RNVC: 2
2376-9000-03: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5939
Socket Wrench Crowfoot Attachment

121235939
1950Z13-16: RNCC: 3 | RNVC: 2
105609: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-120-6614
Drive Pin Punch

121206614
594S1-2X95: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-361-4671
Combination Box And Open End Wrench

123614671
DIN3113-A38: RNCC: 2 | RNVC: 2
13-38: RNCC: 3 | RNVC: 2
40083838: RNCC: 5 | RNVC: 2

6 Oct 2003

5120-12-316-0814
Socket Head Screw Key

123160814
117305: RNCC: 3 | RNVC: 2
9814-05: RNCC: 3 | RNVC: 2

21 Dec 1988

5120-12-347-1201
Seal Inserter

123471201
80996170091: RNCC: 3 | RNVC: 2

29 Oct 1998

5120-12-369-0340
Box Wrench

123690340
TL5120-0078-095: RNCC: 2 | RNVC: 2
DIN837-B16X18: RNCC: 5 | RNVC: 1

16 May 2006

5120-12-134-2733
Mechanical Puller

121342733
003M02500: RNCC: 3 | RNVC: 2
VM70682: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-141-9783
Open End Wrench

121419783
571A203B13-16IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-174-5091
Combination Box And Open End Wrench

121745091
61360-14: RNCC: 3 | RNVC: 2
C 5703 812 DC: RNCC: 5 | RNVC: 2
C 5703 812 DC: RNCC: 5 | RNVC: 2
250A-07-0708: RNCC: 5 | RNVC: 2
61 350/14: RNCC: 5 | RNVC: 2
AK14DIN3113: RNCC: 5 | RNVC: 2
DIN3113-A14: RNCC: 5 | RNVC: 2
DIN3113-AK14: RNCC: 5 | RNVC: 2
250A-07-0708: RNCC: 5 | RNVC: 9

3 Jul 1978

5120-12-126-3352
Hand Hammer

121263352
470BSB1000: RNCC: 3 | RNVC: 2
470BSB1000: RNCC: 3 | RNVC: 9
226-1000MST: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-361-5106
Socket Wrench Set

123615106
50MA/39/6N: RNCC: 3 | RNVC: 2
96030140: RNCC: 5 | RNVC: 2

10 Oct 2003

5120-12-127-2142
Pipe Wrench

121272142
431BECU85-900: RNCC: 3 | RNVC: 2
431BECU85-900: RNCC: 3 | RNVC: 9
282-900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-2624
Socket Wrench Screwdriver Attachment

123682624
44P-2: RNCC: 3 | RNVC: 2
01290002: RNCC: 5 | RNVC: 2

18 Jan 2006

5120-12-133-3778
Socket Wrench Crowfoot Attachment

121333778
540A1 5-16: RNCC: 3 | RNVC: 2
FC42: RNCC: 3 | RNVC: 2
02500058: RNCC: 5 | RNVC: 2
AN8506-15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-6957
A Fuehrungsbuechse

121276957
83.09144-0066: RNCC: 3 | RNVC: 2
83091440066: RNCC: 3 | RNVC: 2
WL986: RNCC: 5 | RNVC: 2
WL9B6: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-336-9796
Screwdriver Bit

123369796
05072860001: RNCC: 3 | RNVC: 2
52952-060: RNCC: 3 | RNVC: 2
072860: RNCC: 3 | RNVC: 9
2130S-8: RNCC: 5 | RNVC: 2
72860: RNCC: 5 | RNVC: 9

4 Jan 1995

5120-12-311-6235
Hand Beading Tool

123116235
01TC33057: RNCC: 3 | RNVC: 2

29 Sep 1987

5120-12-150-4474
Eindrueckvorrichtun

121504474
837589136100: RNCC: 3 | RNVC: 2
8375891361: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-350-4795
Mechanical Puller

123504795
1668467: RNCC: 3 | RNVC: 2
1569809: RNCC: 5 | RNVC: 2

4 Apr 2000

5120-12-190-3922
Pipe Wrench

121903922
62030700: RNCC: 3 | RNVC: 2
620 307 00: RNCC: 5 | RNVC: 9

24 Nov 1981

5120-12-023-0357

5120-12-335-6868
W Spannvorrichtung

123356868
0852 3104: RNCC: 3 | RNVC: 2
8523104: RNCC: 5 | RNVC: 2

13 Sep 1994

5120-12-192-4519
Einpreszwerkzeug

121924519
2300109-990960.000.0: RNCC: 2 | RNVC: 2
2300109-990960.000.0: RNCC: 3 | RNVC: 2
2300109-990960.000.0: RNCC: 3 | RNVC: 2
2300109-990960.000.0: RNCC: 5 | RNVC: 2

26 Apr 1982

5120-12-192-4376
Hand Tube Bender

121924376
5905890027/00: RNCC: 3 | RNVC: 2
CVR-5905890027/00: RNCC: 5 | RNVC: 2
590589002700: RNCC: 5 | RNVC: 2
CVR-5905890027/00: RNCC: 5 | RNVC: 2

26 Apr 1982

5120-12-135-8749
Ein- Abstandsrohr

121358749
35-10-11: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-700-3620
Socket Wrench Extension

127003620
51-084321024: RNCC: 2 | RNVC: 2
865.63.SB6717: RNCC: 5 | RNVC: 9
765.93.SB255: RNCC: 5 | RNVC: 9

9 Apr 1992

5120-12-126-2944
Inspection Mirror

121262944
5515B: RNCC: 3 | RNVC: 2
108697: RNCC: 5 | RNVC: 2
5M.8938.220.31: RNCC: 5 | RNVC: 2
5M8938-220-31: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-154-9365
Socket Head Screw Key

121549365
NO PRIMARY REF 12-154-9365: RNCC: 3 | RNVC: 2
5180-0201-5: RNCC: 5 | RNVC: 9
5180-201-5: RNCC: 5 | RNVC: 9
TL5180-0201-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-329-2481
Spanner Wrench

123292481
000589130500: RNCC: 3 | RNVC: 2

28 Jul 1992

5120-12-320-0420
Pliers

123200420
2 SK 816: RNCC: 3 | RNVC: 2

30 Nov 1989

5120-12-384-9650
Oil Filter Wrench

123849650
I002451: RNCC: 3 | RNVC: 2

14 Apr 2011

5120-12-195-7565
Radkappe Abzieher

121957565
191 012 243: RNCC: 3 | RNVC: 2
251 012 243: RNCC: 5 | RNVC: 9
251012243: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-12-346-0803
Hand Tube Flaring Tool

123460803
150150: RNCC: 3 | RNVC: 2

8 Jun 1998

5120-12-134-2697

5120-12-133-2708
Oe Stanz- Stempel

121332708
STPLL18: RNCC: 3 | RNVC: 2
STPLL18: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-363-9037
Bearing And Bushing Inserter

123639037
T670P5001245: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-379-8453
Hand Pipe And Sewer Auger

123798453
7.2444: RNCC: 3 | RNVC: 2

8 Sep 2009

5120-12-366-6255
W Spannvorrichtung

123666255
1000042-196600.01: RNCC: 3 | RNVC: 2

17 May 2005

5120-12-341-8521
Combination Box And Open End Wrench Set

123418521
13A/8: RNCC: 3 | RNVC: 2
96404803: RNCC: 5 | RNVC: 2

5 Nov 1996

5120-12-196-5916
Retaining Ring Installation Tool

121965916
13142-01: RNCC: 3 | RNVC: 2
13142-01-405: RNCC: 5 | RNVC: 2
13142-01-407: RNCC: 5 | RNVC: 2
MAGERD 6029: RNCC: 5 | RNVC: 9

20 Jul 1983

5120-12-140-3056
Socket Wrench Socket

121403056
NO PRIMARY REF 12-140-3056: RNCC: 3 | RNVC: 2
109948: RNCC: 5 | RNVC: 9
7810SM22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-166-9814
Einstellwerkzeug

121669814
70-049A3: RNCC: 3 | RNVC: 2

10 Nov 1976

5120-12-386-8652
Craftsman's Tweezers

123868652
0.308.1410: RNCC: 3 | RNVC: 2
0.308.1410: RNCC: 5 | RNVC: 2

10 Oct 2011

5120-12-134-2684

5120-12-024-3430

5120-12-392-1775
Mecha Ejector Tool

123921775
96746235: RNCC: 3 | RNVC: 2

13 May 2013

5120-12-010-1363

5120-12-327-7175
Gew Spann- Huelse

123277175
01500674632: RNCC: 3 | RNVC: 2
0150 0674 632: RNCC: 5 | RNVC: 2
0150-0674-632: RNCC: 5 | RNVC: 2

24 Feb 1992

5120-12-339-9702
Eindrueckwerkzeug

123399702
5078408: RNCC: 3 | RNVC: 2
698-460-0021: RNCC: 5 | RNVC: 2

7 Feb 1996

5120-12-123-4839
Open End Wrench

121234839
DIN133-60: RNCC: 2 | RNVC: 2
133-60: RNCC: 3 | RNVC: 2
2300-60: RNCC: 3 | RNVC: 2
175-60: RNCC: 3 | RNVC: 2
452-60: RNCC: 3 | RNVC: 2
01750009: RNCC: 5 | RNVC: 2
60DIN133: RNCC: 5 | RNVC: 2
571A301-60: RNCC: 5 | RNVC: 9
50560: RNCC: 5 | RNVC: 9
1102110009: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-6993
Electrical Contact Remover

121816993
54701499: RNCC: 3 | RNVC: 2
PUL-DIL24/4054174099: RNCC: 5 | RNVC: 2
101-24-40PIN: RNCC: 5 | RNVC: 9

10 Dec 1979

5120-12-324-4769
Socket Wrench Set

123244769
771LINDMU: RNCC: 3 | RNVC: 2
7819HNR: RNCC: 3 | RNVC: 2
19FMU-10: RNCC: 3 | RNVC: 2
1831479: RNCC: 5 | RNVC: 2
19HNR-C: RNCC: 5 | RNVC: 9
285862: RNCC: 5 | RNVC: 9

20 Feb 1991

5120-12-325-3337
Ratchet Wrench

123253337
NO PRIMARY REF 12-325-3337: RNCC: 3 | RNVC: 2
1322Z7/8: RNCC: 5 | RNVC: 9
174335: RNCC: 5 | RNVC: 9

27 May 1991

5120-12-339-8303
Torque Wrench Adapter

123398303
702-150250-903-0: RNCC: 3 | RNVC: 2

23 Jan 1996

5120-12-380-3861
Quick Adjusting Screw Clamp

123803861
472-016: RNCC: 3 | RNVC: 2

26 Oct 2009

5120-12-176-9063
Socket Wrench Adapter

121769063
3022-0025-58 27 69: RNCC: 3 | RNVC: 2
3032-0025-581970: RNCC: 5 | RNVC: 2

27 Dec 1978

5120-12-145-3612
Combination Box And Open End Wrench

121453612
100109-9100.03: RNCC: 2 | RNVC: 2
100109-9100-03: RNCC: 3 | RNVC: 2
100109-9100.03: RNCC: 5 | RNVC: 2
100109-9100-03: RNCC: 5 | RNVC: 2
100109-9100-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-391-0631
Box Wrench

123910631
DIN838-34X36: RNCC: 2 | RNVC: 2

22 Jan 2013

5120-12-170-9009
Pliers

121709009
V6570-35001-041: RNCC: 3 | RNVC: 2

19 Aug 1977

5120-12-313-4932
Mechanical Puller Forcing Screw

123134932
P-896436-403: RNCC: 3 | RNVC: 2
P896436-403: RNCC: 5 | RNVC: 2

8 Apr 1988

5120-12-309-2835
Seal Inserter

123092835
824125-4000: RNCC: 3 | RNVC: 2

9 Jan 1987

5120-12-310-3079
Electronic Equipment Alignment Tool

123103079
3512 118 2713 1: RNCC: 3 | RNVC: 2
351211827131: RNCC: 5 | RNVC: 2

8 May 1987

5120-12-392-9365
Socket Head Screw Key

123929365
10759A-2-3/32: RNCC: 3 | RNVC: 2
4018754085125: RNCC: 5 | RNVC: 2
43564006: RNCC: 5 | RNVC: 2

24 Jul 2013

5120-12-385-8327
Torque Wrench Adapter

123858327
D0130980-001: RNCC: 3 | RNVC: 2
647711: RNCC: 5 | RNVC: 2

12 Jul 2011

5120-12-177-3186
Bearing And Bushing Inserter

121773186
23290-268170.001: RNCC: 2 | RNVC: 2
23290-268170.001: RNCC: 3 | RNVC: 2
23290-268170-001: RNCC: 5 | RNVC: 9
23290-268170.001: RNCC: 5 | RNVC: 9

29 Jan 1979

5120-12-390-1510
Quick Adjusting Screw Clamp

123901510
SQ-12-SP-BG: RNCC: 3 | RNVC: 2

10 Oct 2012

5120-12-385-3075
Hand Scissors Jack

123853075
11.49032-0347: RNCC: 3 | RNVC: 2
11.49032-0347: RNCC: 5 | RNVC: 2
021.509: RNCC: 5 | RNVC: 2

20 May 2011

5120-12-390-4219
Mechanical Puller Attachment

123904219
F6451946: RNCC: 3 | RNVC: 2

12 Nov 2012

5120-12-171-3433
Wrecking Bar

121713433
8050-900: RNCC: 3 | RNVC: 9

30 Sep 1977

Load More Results