What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 43 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 43 of 62

5120-12-348-6079
Socket Wrench

123486079
622300-4,5: RNCC: 3 | RNVC: 2
62230-4,5: RNCC: 5 | RNVC: 9

26 Jul 1999

5120-12-339-0753
Flat Tip Screwdriver

123390753
NO PRIMARY REF 12-339-0753: RNCC: 3 | RNVC: 2
3930140008: RNCC: 5 | RNVC: 9
829-3: RNCC: 5 | RNVC: 9

9 Oct 1995

5120-12-183-9835
Screwdriver Bit

121839835
05073155001: RNCC: 3 | RNVC: 2
2230-10: RNCC: 3 | RNVC: 9
2230S-10X50: RNCC: 5 | RNVC: 2
73155: RNCC: 5 | RNVC: 9

7 Jun 1980

5120-12-384-1985
Blindni Mundstueck

123841985
7498-8601: RNCC: 3 | RNVC: 2
08087209004: RNCC: 5 | RNVC: 2
08.08720-9004: RNCC: 5 | RNVC: 2

1 Feb 2011

5120-12-123-5582
Schluesseleinsatzsa

121235582
NO PRIMARY REF 12-123-5582: RNCC: 3 | RNVC: 2
4115-1C: RNCC: 5 | RNVC: 9
157503: RNCC: 5 | RNVC: 9
4115-1-4-5: RNCC: 5 | RNVC: 9
107873: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-7973
Torque Wrench Adapter

121537973
CH2522-20-3: RNCC: 3 | RNVC: 2
5605890003/03: RNCC: 5 | RNVC: 2
560589000303: RNCC: 5 | RNVC: 2
CH2522-20-3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-0506

5120-12-322-3765
Spanner Wrench

123223765
12791-110000.022: RNCC: 2 | RNVC: 2
009-039.110-022W5: RNCC: 3 | RNVC: 2
12791-110000.022: RNCC: 5 | RNVC: 2

16 Aug 1990

5120-12-371-0129
Box Wrench

123710129
7102-0034: RNCC: 3 | RNVC: 2

25 Jan 2007

5120-12-320-7944
Flat Tip Screwdriver

123207944
102-4X75: RNCC: 3 | RNVC: 2
63-0408: RNCC: 3 | RNVC: 2
811-4-75: RNCC: 3 | RNVC: 2
6152010: RNCC: 3 | RNVC: 2

16 Feb 1990

5120-12-174-0426
Cross Tip Screwdriver

121740426
C8078-3: RNCC: 3 | RNVC: 2
148687: RNCC: 5 | RNVC: 2
1400355: RNCC: 5 | RNVC: 2

31 May 1978

5120-12-173-1709
Spanner Wrench

121731709
V7001-004-921-3: RNCC: 3 | RNVC: 2
V7001-004-921-3: RNCC: 5 | RNVC: 2

22 Mar 1978

5120-12-189-8990
Monta Gewindestueck

121898990
2300109-990950.001.0: RNCC: 2 | RNVC: 2
2300109-990950.001.0: RNCC: 3 | RNVC: 2
2300109-990950.001.0: RNCC: 3 | RNVC: 2
2300109-990950-001-0: RNCC: 5 | RNVC: 2

26 Oct 1981

5120-12-338-4363
Socket Head Screw Key

123384363
81DB-17A085-AB: RNCC: 3 | RNVC: 2
97808020130: RNCC: 5 | RNVC: 2
6134133: RNCC: 5 | RNVC: 2
81DB17A085AB: RNCC: 5 | RNVC: 2

10 Jul 1995

5120-12-147-6740
Socket Wrench

121476740
895-6,5: RNCC: 3 | RNVC: 2
895-6-5: RNCC: 5 | RNVC: 2
200-6-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-5281
Solid Center Punch

121745281
C3643-150: RNCC: 3 | RNVC: 2
107466: RNCC: 5 | RNVC: 2

5 Jul 1978

5120-12-133-2530
Retaining Ring Pliers

121332530
469: RNCC: 3 | RNVC: 2
1847-2: RNCC: 3 | RNVC: 2
00.14.07.49: RNCC: 5 | RNVC: 2
5374520026: RNCC: 5 | RNVC: 2
56027: RNCC: 5 | RNVC: 2
023K026: RNCC: 5 | RNVC: 9
106346: RNCC: 5 | RNVC: 9
106347: RNCC: 5 | RNVC: 9
2460-7: RNCC: 5 | RNVC: 9
2460-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-357-7539
Ru Montierwerkzeug

123577539
RD99-00-012200: RNCC: 3 | RNVC: 2

19 Jul 2002

5120-12-121-1995
Hand Paper Burnisher

121211995
79-200: RNCC: 3 | RNVC: 2
BN 3090: RNCC: 3 | RNVC: 2
109028: RNCC: 3 | RNVC: 2
2026-100: RNCC: 5 | RNVC: 2
N04000200: RNCC: 5 | RNVC: 2
FS52910: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-157-6781
Kabelschuh Stempel

121576781
N10-16WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-180-9162
Seal Inserter And Remover

121809162
352589014300: RNCC: 3 | RNVC: 2
3525890143: RNCC: 5 | RNVC: 2
352589014300: RNCC: 5 | RNVC: 2

11 Oct 1979

5120-12-357-7259
Seal Inserter

123577259
9249444000: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-369-0496
Quick Adjusting Screw Clamp

123690496
9997036-990210.000.0: RNCC: 3 | RNVC: 2

17 May 2006

5120-12-151-6613
Absteckgabel

121516613
WKW9009-0102V2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-368-8714
Screw Extractor

123688714
260 005 3: RNCC: 3 | RNVC: 2
01.42.44.82: RNCC: 5 | RNVC: 2

3 May 2006

5120-12-333-5916
Seal Inserter And Remover

123335916
55000200000: RNCC: 3 | RNVC: 2

11 Jan 1994

5120-12-126-3400
Mattock-Pick Handle

121263400
DIN6437-950-76-ES: RNCC: 2 | RNVC: 2
DIN6437-950-76: RNCC: 5 | RNVC: 9
1000X76DIN6437: RNCC: 5 | RNVC: 9
950-76DIN6437: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-170-7477
Lamp Extractor

121707477
0732-086-0212-001: RNCC: 3 | RNVC: 2

3 Aug 1977

5120-12-186-1607
Halter

121861607
144110: RNCC: 3 | RNVC: 2
VDP7560: RNCC: 5 | RNVC: 2
3-105-KHD: RNCC: 5 | RNVC: 2

2 Dec 1980

5120-12-141-9652
Mechanical Puller

121419652
4541-A: RNCC: 3 | RNVC: 2
108241: RNCC: 5 | RNVC: 2
201-1B: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-191-6678
Steckschluesseleins

121916678
S4-1600640: RNCC: 3 | RNVC: 2
Z3-1600640: RNCC: 5 | RNVC: 9
S4-1600640: RNCC: 5 | RNVC: 9

23 Feb 1982

5120-12-334-9496
Box Wrench

123349496
11.49001-0147: RNCC: 3 | RNVC: 2
11.49001-0147: RNCC: 5 | RNVC: 9
11.49001-0417: RNCC: 5 | RNVC: 9
B11.49028-0426TEIL4: RNCC: 5 | RNVC: 9
B11.49028-0426TEIL4: RNCC: 5 | RNVC: 9

5 Jul 1994

5120-12-142-0266
Abzieher Haken

121420266
553: RNCC: 3 | RNVC: 2
TS5120-0657-553: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-337-2057
Duese Reiniger

123372057
11.49051-0170: RNCC: 3 | RNVC: 2
001.735: RNCC: 5 | RNVC: 2
001.735: RNCC: 5 | RNVC: 9
11.49051-0170: RNCC: 5 | RNVC: 9

1 Feb 1995

5120-12-329-3299
Torque Wrench

123293299
591801-9035.000: RNCC: 3 | RNVC: 2
591801/9035: RNCC: 5 | RNVC: 2

6 Aug 1992

5120-12-130-9929
Socket Head Screw Key

121309929
DIN905-11: RNCC: 2 | RNVC: 2
3015/11: RNCC: 3 | RNVC: 2
005522: RNCC: 5 | RNVC: 2
11DIN905: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-146-0586
Spanner Wrench

121460586
23114-7101-12: RNCC: 2 | RNVC: 2
510154: RNCC: 5 | RNVC: 2
510154: RNCC: 5 | RNVC: 9
23114-7101-12: RNCC: 5 | RNVC: 9
510154: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-379-1737
Torque Wrench

123791737
730NR/40FK: RNCC: 3 | RNVC: 2
96502140: RNCC: 5 | RNVC: 2

30 Jun 2009

5120-12-368-2390
Torque Wrench Adapter

123682390
28/0-1/4X30: RNCC: 3 | RNVC: 2
103313: RNCC: 5 | RNVC: 2

13 Jan 2006

5120-12-326-2690
Seal Inserter

123262690
8205892043/00: RNCC: 3 | RNVC: 2
820589204300: RNCC: 5 | RNVC: 9

23 Aug 1991

5120-12-389-0018
Bearing And Bushing Inserter And Remover

123890018
80996280109: RNCC: 3 | RNVC: 2
80.99628-0109: RNCC: 5 | RNVC: 2

15 May 2012

5120-12-329-3298
Socket Head Screw Key

123293298
591801-9022.000: RNCC: 3 | RNVC: 2
591801/9022: RNCC: 5 | RNVC: 2

6 Aug 1992

5120-12-156-1663
Claw Bar

121561663
NM267-01: RNCC: 3 | RNVC: 2
NM267-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-1559
Socket Wrench Adapter

121561559
NM303-04: RNCC: 3 | RNVC: 2
NM303-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-332-0336
Impact Type Bit Set And Handle Screwdriver

123320336
K1900-013: RNCC: 3 | RNVC: 2
665460: RNCC: 5 | RNVC: 2

16 Jul 1993

5120-12-315-5971
Ausdrueckwerkzeug

123155971
VS8169G017: RNCC: 2 | RNVC: 2
VS8169G017: RNCC: 3 | RNVC: 2
VS8169G017: RNCC: 5 | RNVC: 9

11 Nov 1988

5120-12-359-0126
Mechanical Puller

123590126
062521: RNCC: 3 | RNVC: 2

10 Dec 2002

5120-12-392-6365
Torque Screwdriver

123926365
9918390000: RNCC: 3 | RNVC: 2
4032248388356: RNCC: 5 | RNVC: 2

25 Jun 2013

5120-12-305-2510
Bearing And Bushing Inserter

123052510
6796947W11: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-368-9841
Socket Wrench Screwdriver Attachment

123689841
3210-IN 12: RNCC: 3 | RNVC: 2
00.49.78.31: RNCC: 5 | RNVC: 2

10 May 2006

5120-12-319-9813
Rivet Bucking Bar

123199813
730: RNCC: 3 | RNVC: 2

24 Nov 1989

5120-12-191-4442
Ausdrueckwerkzeug

121914442
D-05.012.27.01.0: RNCC: 3 | RNVC: 2

2 Feb 1982

5120-12-331-6979
Torque Wrench Set

123316979
NO PRIMARY REF 12-331-6979: RNCC: 3 | RNVC: 2
96502069: RNCC: 5 | RNVC: 9
96 50 20 69: RNCC: 5 | RNVC: 9

8 Jun 1993

5120-12-150-8217
Electron Tube Extractor

121508217
C42326A20B51: RNCC: 3 | RNVC: 2
5800573-111264: RNCC: 5 | RNVC: 2
5800573-111264: RNCC: 5 | RNVC: 9
C42326A20B51: RNCC: 5 | RNVC: 9
5800573-111264: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-0787
Montagevorrichtung

121710787
VG95211-ML-121710787: RNCC: 2 | RNVC: 2
105-14101W12: RNCC: 3 | RNVC: 2

7 Sep 1977

5120-12-133-6173
Gewindedorn

121336173
164-181: RNCC: 3 | RNVC: 2
S552BM6-125: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-188-7668
Vierfac Stahlhalter

121887668
TL5120-0123-5: RNCC: 2 | RNVC: 2
9-255: RNCC: 3 | RNVC: 2

28 Jul 1981

5120-12-189-5761
Spanner Wrench

121895761
P-896810-405: RNCC: 3 | RNVC: 2
P896810-403: RNCC: 5 | RNVC: 2
P896810-405: RNCC: 5 | RNVC: 2
P896810-407: RNCC: 5 | RNVC: 2
MAGERD 2190: RNCC: 5 | RNVC: 9

6 Oct 1981

5120-12-123-5585
Schluesseleinsatzsa

121235585
NO PRIMARY REF 12-123-5585: RNCC: 3 | RNVC: 2
107876: RNCC: 5 | RNVC: 9
157562: RNCC: 5 | RNVC: 9
4115-2-2-5: RNCC: 5 | RNVC: 9
4115-2A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-140-4180
Grommet Inserting Punch And Die

121404180
3355-31X8: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-373-9315
Mater Saug- Griff

123739315
0715 58 01: RNCC: 3 | RNVC: 2

19 Dec 2007

5120-12-335-6877
Swivel Knob Jeweler's Screwdriver

123356877
260P-2,5X50: RNCC: 3 | RNVC: 2
260-2,5X50: RNCC: 5 | RNVC: 9

13 Sep 1994

5120-12-303-8191
Spanner Wrench

123038191
009-030.140-002W2: RNCC: 3 | RNVC: 2
12790-120000.002: RNCC: 5 | RNVC: 2
009-039.140-002W2: RNCC: 5 | RNVC: 9

6 May 1985

5120-12-126-1357
Hand Hammer

121261357
NO PRIMARY REF 12-126-1357: RNCC: 3 | RNVC: 2
DIN5177: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-373-0132
Socket Wrench Handle

123730132
9501-0014: RNCC: 3 | RNVC: 2

17 Sep 2007

5120-12-164-8993
Socket Wrench Socket

121648993
23305-264100.02.0: RNCC: 2 | RNVC: 2
23305-264100-02-0: RNCC: 5 | RNVC: 2
HT05/6891/01: RNCC: 5 | RNVC: 9
23305-264100.02.0: RNCC: 5 | RNVC: 9
23305-264100-02-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-178-0008
Spanner Wrench

121780008
44327-001: RNCC: 3 | RNVC: 2

13 Mar 1979

5120-12-353-8746
Screwdriver Bit

123538746
0015895509/00: RNCC: 3 | RNVC: 2
001589550900: RNCC: 5 | RNVC: 2
001589550900: RNCC: 5 | RNVC: 2
001589550900: RNCC: 5 | RNVC: 2

16 May 2001

5120-12-192-1294
Abziehvorrichtung

121921294
E1149025-0039: RNCC: 3 | RNVC: 2
E11.49025-0039: RNCC: 5 | RNVC: 2
E11.49025-0039: RNCC: 5 | RNVC: 2

24 Mar 1982

5120-12-168-5144
Hebelarm

121685144
VG95211-ML-121685144: RNCC: 2 | RNVC: 2
160-88507-09: RNCC: 3 | RNVC: 2
160-88507-09: RNCC: 5 | RNVC: 9

18 Mar 1977

5120-12-318-8969
Socket Wrench Extension

123188969
NO PRIMARY REF 12-318-8969: RNCC: 3 | RNVC: 2
52975: RNCC: 5 | RNVC: 9
560-SPEZ.: RNCC: 5 | RNVC: 9

23 Aug 1989

5120-12-324-5360
Mechanical Puller Attachment

123245360
VY3.059-2: RNCC: 3 | RNVC: 2
VY921021-2: RNCC: 5 | RNVC: 2

27 Feb 1991

5120-12-369-2743
Eindrueckwerkzeug

123692743
80996040219: RNCC: 3 | RNVC: 2
80.99604-0219: RNCC: 5 | RNVC: 2

13 Jun 2006

5120-12-330-4479
Mechanical Puller Attachment

123304479
0852 4914.004: RNCC: 3 | RNVC: 2
8524914.004: RNCC: 5 | RNVC: 2

16 Dec 1992

5120-12-146-3730
Ruec Hand- Kurbel

121463730
25704-360450.00.0: RNCC: 2 | RNVC: 2
25704-360450-00-0: RNCC: 3 | RNVC: 2
25704-360450.00.0: RNCC: 3 | RNVC: 2
02166: RNCC: 3 | RNVC: 2
25704-360450-00-0: RNCC: 5 | RNVC: 9
25704-360450.00.0: RNCC: 5 | RNVC: 9
02166: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-197-8298
Combination Box And Open End Wrench

121978298
NO PRIMARY REF 12-197-8298: RNCC: 3 | RNVC: 2
105697: RNCC: 5 | RNVC: 9
1952E3/16: RNCC: 5 | RNVC: 9

25 Nov 1983

5120-12-339-4606
Swivel Knob Jeweler's Screwdriver

123394606
ESD142010: RNCC: 3 | RNVC: 2
4872-0X60: RNCC: 3 | RNVC: 2

24 Nov 1995

5120-12-348-6479
Torque Wrench Adapter

123486479
8791-22: RNCC: 3 | RNVC: 2

29 Jul 1999

5120-12-185-4137
Electronic Equipment Alignment Tool

121854137
42392-1101: RNCC: 3 | RNVC: 2

3 Oct 1980

5120-12-335-0656
Montierhuelse

123350656
F6091577: RNCC: 3 | RNVC: 2

19 Jul 1994

5120-12-306-6651
Hand Contact Burnisher

123066651
913: RNCC: 3 | RNVC: 9

19 Mar 1986

5120-12-385-0763
Pull And Press Tool

123850763
I002927: RNCC: 3 | RNVC: 2
4052063029272: RNCC: 5 | RNVC: 2

28 Apr 2011

5120-12-386-6715
Torque Wrench Adapter

123866715
300.068.553: RNCC: 3 | RNVC: 2

21 Sep 2011

5120-12-188-3958
Buchse

121883958
120630-2: RNCC: 3 | RNVC: 2
99366675: RNCC: 3 | RNVC: 2
E5928-00-01: RNCC: 5 | RNVC: 2

6 Jul 1981

5120-12-348-6332
Adjustable Wrench

123486332
62P-15: RNCC: 3 | RNVC: 2
62-15: RNCC: 5 | RNVC: 9

28 Jul 1999

5120-12-330-2627
El Montierwerkzeug

123302627
4900255-131000-00-00: RNCC: 2 | RNVC: 2
4900255-131000-00-00: RNCC: 5 | RNVC: 9

24 Nov 1992

5120-12-137-0470
Drain Plug Wrench

121370470
7-833-0010: RNCC: 3 | RNVC: 2
0-90114701: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-306-3099
Crimping Tool Die

123063099
558-409000-01-0: RNCC: 3 | RNVC: 2
558-409000.01.0: RNCC: 3 | RNVC: 2

18 Feb 1986

5120-12-314-2778
Montierhuelse

123142778
0852 9879: RNCC: 3 | RNVC: 2
8529879: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-133-4163
Spanner Wrench

121334163
54-0008-177-00: RNCC: 3 | RNVC: 2
540008-177-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-358-9926
Seal Inserter

123589926
9129634402: RNCC: 3 | RNVC: 2
912963-4402: RNCC: 5 | RNVC: 9

5 Dec 2002

5120-12-168-6336
Montagevorrichtung

121686336
7023130000906: RNCC: 3 | RNVC: 2
702313-0000.906: RNCC: 3 | RNVC: 2

25 Mar 1977

5120-12-123-5355
Socket Wrench Handle Bar

121235355
DIN900-A32: RNCC: 2 | RNVC: 2
26D-32: RNCC: 3 | RNVC: 2
620955: RNCC: 5 | RNVC: 2
A32DIN900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-132-1106
Open End Wrench

121321106
499202-3130: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-370-6963
Socket Wrench Adapter

123706963
3115/1: RNCC: 3 | RNVC: 2
08.06139-9029: RNCC: 5 | RNVC: 2
08061399029: RNCC: 5 | RNVC: 2
31150002: RNCC: 5 | RNVC: 2

11 Dec 2006

5120-12-173-5474
Hand Intrenching Tool

121735474
TL5120-0011: RNCC: 2 | RNVC: 2
5100086: RNCC: 2 | RNVC: 2
180202010: RNCC: 5 | RNVC: 2
4761.01: RNCC: 5 | RNVC: 9
18020B010: RNCC: 6 | RNVC: 9

19 Apr 1978

5120-12-151-9611
Monta Gewindestueck

121519611
2360-264152.05.0: RNCC: 2 | RNVC: 2
2360-264152.05.0: RNCC: 3 | RNVC: 2
2360-264152-05-0: RNCC: 5 | RNVC: 2
2360-264152-05-0: RNCC: 5 | RNVC: 2
2360-264152.05.0: RNCC: 5 | RNVC: 2
2360-264152-05-0: RNCC: 5 | RNVC: 9
2360-264152.05.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-198-1898
Torque Wrench

121981898
8568-20: RNCC: 3 | RNVC: 2
769231: RNCC: 5 | RNVC: 9

28 Dec 1983

5120-12-365-9976
Mechanical Puller

123659976
80996010200: RNCC: 3 | RNVC: 2
53-230: RNCC: 3 | RNVC: 2
80.99601-0200: RNCC: 5 | RNVC: 2

24 Feb 2005

5120-12-123-5239
Box Wrench

121235239
DIN837-A24X27: RNCC: 2 | RNVC: 2
22-24X27: RNCC: 3 | RNVC: 2
A24X27DIN837: RNCC: 5 | RNVC: 2
41062427: RNCC: 5 | RNVC: 2
A24X27DIN837GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-350-4816
Montierhuelse

123504816
26-21C1360G003P23: RNCC: 3 | RNVC: 2

5 Apr 2000

5120-12-182-5088
Face Spanner Wrench Socket

121825088
S51645-0000: RNCC: 3 | RNVC: 2

8 Feb 1980

5120-12-172-0920
Pliers

121720920
JD5120-12-172-0920: RNCC: 3 | RNVC: 2
147397: RNCC: 5 | RNVC: 9
2656R: RNCC: 5 | RNVC: 9

19 Dec 1977

5120-12-353-4511
Electrical Contact Inserter

123534511
TW2100-24/6: RNCC: 3 | RNVC: 2

26 Mar 2001

5120-12-373-2815
Pliers

123732815
109024: RNCC: 3 | RNVC: 2

17 Oct 2007

5120-12-393-6770
Pinch Bar

123936770
7135614: RNCC: 3 | RNVC: 2

1 Oct 2013

5120-12-156-1606
Box Wrench

121561606
NM286-15: RNCC: 3 | RNVC: 2
NM286-15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-6288
Valve Spring Compressor

123886288
113.211: RNCC: 3 | RNVC: 2
113.211: RNCC: 5 | RNVC: 2

5 Apr 2012

5120-12-313-4262
Zentrier- Ring

123134262
80996040068: RNCC: 3 | RNVC: 2
80.99604.0068: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-361-1933
Okular Zange

123611933
000-033: RNCC: 3 | RNVC: 2

2 Sep 2003

5120-12-133-3747
Box Wrench

121333747
23A15-16X1: RNCC: 3 | RNVC: 2
41474648: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-120-5783
Tamper Handle

121205783
NO PRIMARY REF 12-120-5783: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-180-5901
Hand Terminal Crimping Tool

121805901
1970: RNCC: 3 | RNVC: 9
53192010: RNCC: 5 | RNVC: 9
970: RNCC: 5 | RNVC: 9

19 Sep 1979

5120-12-171-0426
Socket Wrench

121710426
06459002: RNCC: 3 | RNVC: 9
FE459-02: RNCC: 3 | RNVC: 9

1 Sep 1977

5120-12-126-4906
Hand Tube Flaring Tool

121264906
NO PRIMARY REF 12-126-4906: RNCC: 3 | RNVC: 2
0230004B: RNCC: 5 | RNVC: 2
108041: RNCC: 5 | RNVC: 9
4480DZ: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-3060
Communications Equipment Spring Adjuster

121263060
NO PRIMARY REF 12-126-3060: RNCC: 3 | RNVC: 2
501A0-5X0-5: RNCC: 5 | RNVC: 2
108406: RNCC: 5 | RNVC: 9
5400A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-350-8350
Verspannvorrichtung

123508350
344967: RNCC: 3 | RNVC: 2

26 May 2000

5120-12-131-3614
Pliers

121313614
VG95211-ML-121313614: RNCC: 2 | RNVC: 2
591-431 200: RNCC: 3 | RNVC: 2
8410-260: RNCC: 3 | RNVC: 9
590005251010: RNCC: 5 | RNVC: 2
84 10 260: RNCC: 5 | RNVC: 9
94-250: RNCC: 5 | RNVC: 9
250DIN5251: RNCC: 5 | RNVC: 9
250DIN5251GERAUHT: RNCC: 5 | RNVC: 9
DIN5251-250GERAUHT: RNCC: 5 | RNVC: 9
591-431: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-7449
Mechanical Puller

123687449
313880: RNCC: 3 | RNVC: 2
0856-02-15-00/37: RNCC: 5 | RNVC: 2

12 Apr 2006

5120-12-126-1946
Tire Iron

121261946
38/16: RNCC: 3 | RNVC: 2
754-400: RNCC: 3 | RNVC: 2
65-7723-800-03: RNCC: 5 | RNVC: 2
633267: RNCC: 5 | RNVC: 2
7540002: RNCC: 5 | RNVC: 2
1570131: RNCC: 5 | RNVC: 9
5150: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-308-3835
Wrench Kit

123083835
NO PRIMARY REF 12-308-3835: RNCC: 3 | RNVC: 2
41800: RNCC: 5 | RNVC: 9
4490340001: RNCC: 5 | RNVC: 9
4616T: RNCC: 5 | RNVC: 9
616/10T: RNCC: 5 | RNVC: 9

3 Oct 1986

5120-12-332-6142
Spanner Wrench

123326142
532117-8108.902: RNCC: 3 | RNVC: 2
532117-8108.902: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-178-4475
Open End Box Wrench Set

121784475
612-8X10T010X11AND12X14AND13X15-: RNCC: 3 | RNVC: 9

20 Apr 1979

5120-12-149-6904

5120-12-369-6703
Torque Wrench Adapter

123696703
7212-21: RNCC: 3 | RNVC: 2
732/10-21: RNCC: 3 | RNVC: 2
08.06455-0030: RNCC: 5 | RNVC: 2
7678240: RNCC: 5 | RNVC: 2
58221021: RNCC: 5 | RNVC: 2

8 Aug 2006

5120-12-347-5845
Socket Wrench Socket

123475845
870-TXE 12: RNCC: 3 | RNVC: 2
45TX-E12: RNCC: 3 | RNVC: 2
58358120: RNCC: 3 | RNVC: 2
00.47.52.96: RNCC: 5 | RNVC: 2

11 Jan 1999

5120-12-176-6546
Electronic Equipment Alignment Tool

121766546
1-446: RNCC: 3 | RNVC: 2

11 Dec 1978

5120-12-318-2046
Ratchet Wrench

123182046
R2-2-VKT13,5: RNCC: 3 | RNVC: 2

20 Jun 1989

5120-12-132-1178
Open End Wrench

121321178
WA13: RNCC: 3 | RNVC: 2
6-7X9: RNCC: 3 | RNVC: 2
6-205: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-3776
Socket Wrench Crowfoot Attachment

121333776
FC28: RNCC: 3 | RNVC: 2
540A7-8: RNCC: 3 | RNVC: 2
02500044: RNCC: 5 | RNVC: 2
AN8506-8: RNCC: 5 | RNVC: 9
571A401-7-8IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-314-2769
Montierhuelse

123142769
0852 8753: RNCC: 3 | RNVC: 2
8528753: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-139-3612
Flat Tip Screwdriver

121393612
GF92186: RNCC: 3 | RNVC: 2
F1310-921860: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-192-0371
Socket Head Screw Key

121920371
334-5,0X350: RNCC: 3 | RNVC: 2
262215009155: RNCC: 5 | RNVC: 2
334-5X350: RNCC: 5 | RNVC: 9

22 Mar 1982

5120-12-194-0853
Torque Wrench Adapter

121940853
TL5120-0086-1010: RNCC: 2 | RNVC: 2
736/10: RNCC: 5 | RNVC: 9
170569: RNCC: 5 | RNVC: 9
7452-5: RNCC: 5 | RNVC: 9
23/DC: RNCC: 5 | RNVC: 9
6263420001: RNCC: 5 | RNVC: 9
6420C: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-164-8984

5120-12-130-3392

5120-12-342-1470
Craftsman's Tweezers

123421470
47002200: RNCC: 3 | RNVC: 2
SMD22SA: RNCC: 5 | RNVC: 2

18 Dec 1996

5120-12-194-2809
Blindni Mundstueck

121942809
GS 2000-8A: RNCC: 3 | RNVC: 9
GS2000-8A: RNCC: 5 | RNVC: 2

19 Oct 1982

5120-12-175-2792
Hand Hammer

121752792
3625N-60: RNCC: 3 | RNVC: 2
107371: RNCC: 5 | RNVC: 2
3625N60: RNCC: 5 | RNVC: 2

6 Sep 1978

5120-12-129-8781
Abziehzange

121298781
1687965004: RNCC: 3 | RNVC: 2
EF3104: RNCC: 5 | RNVC: 2
KDAW9995-4: RNCC: 5 | RNVC: 9
1687965004: RNCC: 5 | RNVC: 9
EF3104: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-2669
Laeppwer Laeppkopf

123402669
652-25: RNCC: 3 | RNVC: 2

20 Mar 1996

5120-12-163-8274
Abzieher Buchse

121638274
20002: RNCC: 3 | RNVC: 2
80.99616-0011: RNCC: 5 | RNVC: 2
80996160011: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-365-4757
Spanner Wrench

123654757
F96177-W1363-A041: RNCC: 3 | RNVC: 2

7 Jan 2005

5120-12-176-7303
Einpreszwerkzeug

121767303
VG95211-ML-121767303: RNCC: 2 | RNVC: 2
105-41121W1: RNCC: 3 | RNVC: 2

15 Dec 1978

5120-12-302-7544
Mechanical Puller Attachment

123027544
4900059-755112.000.0: RNCC: 3 | RNVC: 2
4900059-755112-000-0: RNCC: 5 | RNVC: 2

29 Jan 1985

5120-12-369-7387
Hyd Ausbauwerkzeug

123697387
906589041500: RNCC: 3 | RNVC: 2
7083679: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-368-9096
Socket Head Screw Key Set

123689096
96435503-TCS: RNCC: 3 | RNVC: 2

5 May 2006

5120-12-092-2245

5120-12-355-3941
Mechanical Puller Attachment

123553941
5555139: RNCC: 3 | RNVC: 2

9 Nov 2001

5120-12-171-3451
Pliers

121713451
65346200: RNCC: 3 | RNVC: 2
2477AB: RNCC: 3 | RNVC: 9
DIN5236-A200S: RNCC: 5 | RNVC: 9
106382: RNCC: 5 | RNVC: 9

30 Sep 1977

5120-12-155-9509
Socket Wrench Socket

121559509
NM291-06: RNCC: 3 | RNVC: 2
NM291-06: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-145-9637
Spanner Wrench

121459637
23114-7114-00: RNCC: 3 | RNVC: 2
510168: RNCC: 5 | RNVC: 2
510168RECHTS: RNCC: 5 | RNVC: 9
23114-7114-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-5049
Spanner Wrench

121535049
510195-000-11: RNCC: 2 | RNVC: 2
169121701: RNCC: 3 | RNVC: 2
E169121701: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-370-8986
Hand Terminal Crimping Tool

123708986
9008190000: RNCC: 3 | RNVC: 2
02.22.70.57: RNCC: 5 | RNVC: 2
4008190446284: RNCC: 5 | RNVC: 2
TT 1064RS: RNCC: 5 | RNVC: 2

15 Jan 2007

5120-12-369-4715
Inserted Hammer Face

123694715
462-50: RNCC: 3 | RNVC: 2
00.75.33.64: RNCC: 5 | RNVC: 2

7 Jul 2006

5120-12-170-1221
Druckstuecksatz

121701221
23176-264260.00.0: RNCC: 2 | RNVC: 2
23176-264260-00-0: RNCC: 3 | RNVC: 2
23176-264260-00-0: RNCC: 5 | RNVC: 9
23176-264260.00.0: RNCC: 5 | RNVC: 9

27 Jun 1977

5120-12-322-8838
Screw Thread Insert Extractor

123228838
TL5120-0116-4: RNCC: 2 | RNVC: 2
01803030000: RNCC: 3 | RNVC: 2

2 Oct 1990

5120-12-123-5793
Socket Wrench Socket

121235793
8400A 21/2 INCH: RNCC: 3 | RNVC: 2
110725: RNCC: 5 | RNVC: 9
180951: RNCC: 5 | RNVC: 9
9500DZ2 1/2: RNCC: 5 | RNVC: 9
571E802B2 1-2INSECHSKANT: RNCC: 5 | RNVC: 9
9500SZ2 1-2: RNCC: 5 | RNVC: 9
60A-2 1/2: RNCC: 5 | RNVC: 9
60A2 1-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-393-6737
Dapping Punch

123936737
A-0261-002-01: RNCC: 3 | RNVC: 2

1 Oct 2013

5120-12-181-2299
Spanner Wrench

121812299
366589003100: RNCC: 3 | RNVC: 2

5 Nov 1979

5120-12-332-6140
Spanner Wrench

123326140
532117-8106.901: RNCC: 3 | RNVC: 2
532117-8106.901: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-140-4352

5120-12-382-5785
Torque Wrench Adapter

123825785
58250020-TCS: RNCC: 3 | RNVC: 2

12 Jul 2010

5120-12-120-6616
Drive Pin Punch

121206616
NO PRIMARY REF 12-120-6616: RNCC: 3 | RNVC: 2
4940-0042-140: RNCC: 5 | RNVC: 9
4940-042-140: RNCC: 5 | RNVC: 9
TL4940-0042-140: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-334-9028
Torque Wrench Adapter

123349028
NO PRIMARY REF 12-334-9028: RNCC: 3 | RNVC: 2
8793-00: RNCC: 5 | RNVC: 9

30 Jun 1994

5120-12-331-0693
Retaining Ring Pliers

123310693
71996A0S: RNCC: 3 | RNVC: 9

18 Mar 1993

5120-12-323-5265
Cross Tip Screwdriver

123235265
8080-1: RNCC: 3 | RNVC: 2

4 Dec 1990

5120-12-155-9489
N Aufsteck- Griff

121559489
NM215: RNCC: 3 | RNVC: 2
NM215: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-329-5239
Socket Head Screw Key

123295239
081-140150-902-0: RNCC: 2 | RNVC: 2
081-140150-902-0: RNCC: 3 | RNVC: 2

27 Aug 1992

5120-12-333-5849
Pliers

123335849
3-461-2: RNCC: 3 | RNVC: 2

10 Jan 1994

5120-12-126-2970
Spanner Wrench

121262970
NO PRIMARY REF 12-126-2970: RNCC: 3 | RNVC: 2
W374: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-2310
Inserted Hammer Face

123712310
E248-40: RNCC: 3 | RNVC: 2
4010883883047: RNCC: 5 | RNVC: 2
8830420: RNCC: 5 | RNVC: 2

2 Mar 2007

5120-12-380-6155
Fixed Open End Wrench Set

123806155
K 350-14-AF: RNCC: 3 | RNVC: 2
00350968582: RNCC: 5 | RNVC: 2
K 350-14-AF: RNCC: 5 | RNVC: 3
391412187400: RNCC: 6 | RNVC: 9

12 Nov 2009

5120-12-133-3954
Screwdriver Bit

121333954
05056320001: RNCC: 3 | RNVC: 2
056320: RNCC: 3 | RNVC: 9
840-1 SW 4: RNCC: 3 | RNVC: 9
840-1-4: RNCC: 3 | RNVC: 9
840/1Z4X25: RNCC: 5 | RNVC: 2
7761-04: RNCC: 5 | RNVC: 9
6990M4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-150-2739
Mechanical Puller

121502739
23176-264510.00.0: RNCC: 2 | RNVC: 2
23176-264510-00-0: RNCC: 2 | RNVC: 2
23176-264510-00-0: RNCC: 5 | RNVC: 2
23176-264510.00.0: RNCC: 5 | RNVC: 2
23176-264510-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-147-9803
Ein- Und Ausbauvorr

121479803
2360-264224.00.0: RNCC: 2 | RNVC: 2
2360-264224.00.0: RNCC: 3 | RNVC: 2
2360-264224-00-0: RNCC: 5 | RNVC: 2
2360-264224.00.0: RNCC: 5 | RNVC: 2
2360-264224-00-0: RNCC: 5 | RNVC: 2
2360-264224-00-0: RNCC: 5 | RNVC: 9
2360-264224.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-390-1301
Seal Inserter

123901301
437589076300: RNCC: 3 | RNVC: 2

9 Oct 2012

5120-12-130-2626
Etching Needle

121302626
NO PRIMARY REF 12-130-2626: RNCC: 3 | RNVC: 2
673-1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-1553
Electronic Equipment Alignment Tool

121461553
500.22-11-U01: RNCC: 3 | RNVC: 2
500-22-11U01: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-372-8207
Montierwerk Huelse

123728207
5415890114/00: RNCC: 3 | RNVC: 2
15006264: RNCC: 5 | RNVC: 2

24 Aug 2007

5120-12-185-5943
Spanner Wrench

121855943
V7060-024-821-17: RNCC: 3 | RNVC: 2

16 Oct 1980

5120-12-185-5498
Montagewerkzeug

121855498
V7060-024-821-25: RNCC: 3 | RNVC: 2

14 Oct 1980

5120-12-342-2433
Bearing And Bushing Inserter

123422433
80996140027: RNCC: 3 | RNVC: 2
80.99614-0027: RNCC: 5 | RNVC: 2

9 Jan 1997

5120-12-309-8413
Rohrbieger Rolle

123098413
840527-00.01: RNCC: 3 | RNVC: 2

10 Mar 1987

5120-12-307-0435
Mechanical Puller Adapter

123070435
3034-9936-000: RNCC: 3 | RNVC: 2
3034-9936-000: RNCC: 5 | RNVC: 9

30 Apr 1986

5120-12-344-1697
Schluessel

123441697
272.395.047: RNCC: 2 | RNVC: 2
272.395.047: RNCC: 3 | RNVC: 2

23 Sep 1997

5120-12-091-4774

5120-12-126-1617
C Clamp

121261617
M101: RNCC: 3 | RNVC: 2
GSM10-7: RNCC: 3 | RNVC: 2
576E000B100: RNCC: 3 | RNVC: 2
370 100: RNCC: 3 | RNVC: 2
61-182: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-370-3102
Mechanical Puller

123703102
461589000700: RNCC: 3 | RNVC: 2

25 Oct 2006

5120-12-364-4636
Bearing And Bushing Inserter

123644636
200 890 018: RNCC: 3 | RNVC: 2

29 Sep 2004

5120-12-153-5193
Drehmomentschluesse

121535193
CH1772-42FE: RNCC: 3 | RNVC: 2
8205893861/00: RNCC: 5 | RNVC: 2
820589386100: RNCC: 5 | RNVC: 2
CH1772-42FE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-360-7597
Spanner Wrench

123607597
ZR06F: RNCC: 3 | RNVC: 2
ZR 06 F: RNCC: 5 | RNVC: 2

7 Jul 2003

5120-12-321-7864
W Spannvorrichtung

123217864
844601926: RNCC: 3 | RNVC: 2

26 Jun 1990

5120-12-365-9163
Swivel Knob Jeweler's Screwdriver

123659163
T4877X 10: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-196-2047
Ausdrueckwerkzeug

121962047
E4-2029330: RNCC: 3 | RNVC: 2
MAGERD 9884: RNCC: 5 | RNVC: 9
E4-2029330: RNCC: 5 | RNVC: 9

13 Jun 1983

5120-12-183-7092
Face Spanner Wrench Socket

121837092
3S51604-0000: RNCC: 3 | RNVC: 2

13 May 1980

5120-12-171-5726
Buchse

121715726
VG95211-ML-121715726: RNCC: 2 | RNVC: 2
1X56 136 372: RNCC: 3 | RNVC: 2
1X56136372: RNCC: 5 | RNVC: 9

26 Oct 1977

5120-12-305-6406
Electronic Equipment Alignment Tool

123056406
1-972: RNCC: 3 | RNVC: 9
5942020013: RNCC: 5 | RNVC: 2

28 Nov 1985

5120-12-133-3766
Socket Wrench Crowfoot Attachment

121333766
FC24: RNCC: 3 | RNVC: 2
540A3-4: RNCC: 3 | RNVC: 2
FC024: RNCC: 5 | RNVC: 2
02500040: RNCC: 5 | RNVC: 2
AN8506-6: RNCC: 5 | RNVC: 9
571A401-3-4IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-325-6287
Seal Inserter

123256287
730589001500: RNCC: 3 | RNVC: 2

24 Jun 1991

5120-12-335-4443
Mechanical Puller

123354443
0852 4840: RNCC: 3 | RNVC: 2
8524840: RNCC: 5 | RNVC: 2

18 Aug 1994

5120-12-353-8750
Screwdriver Bit

123538750
001589590900: RNCC: 3 | RNVC: 2

16 May 2001

5120-12-158-0799
Spanner Wrench

121580799
510111042: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-1751
Sheet Metalworking Stake

121261751
631B166-30: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-157-8169
Mechanical Puller

121578169
2028-01: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5062
Open End Wrench

121235062
C20407-Z9-A4: RNCC: 3 | RNVC: 2
C20407A9A4: RNCC: 5 | RNVC: 2
C20407Z9A4: RNCC: 5 | RNVC: 2
TFS70-04610: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-392-5224
Mechanical Puller

123925224
CTP45262G001: RNCC: 3 | RNVC: 2

14 Jun 2013

5120-12-321-9226
Open End Wrench

123219226
790015377: RNCC: 3 | RNVC: 2
61280-55: RNCC: 5 | RNVC: 9

10 Jul 1990

5120-12-342-8653
Bearing And Bushing Inserter

123428653
038.013.0: RNCC: 3 | RNVC: 2
038.013.0-4: RNCC: 5 | RNVC: 2
18 912 2604: RNCC: 5 | RNVC: 2

10 Apr 1997

5120-12-381-8874
Socket Wrench Extension

123818874
F1.4928-00-98-00.35-00: RNCC: 3 | RNVC: 2
1202530: RNCC: 5 | RNVC: 2

14 Apr 2010

5120-12-123-5410
Box Wrench

121235410
NO PRIMARY REF 12-123-5410: RNCC: 3 | RNVC: 2
236888: RNCC: 5 | RNVC: 9
4-0910: RNCC: 5 | RNVC: 9
4-9X10: RNCC: 5 | RNVC: 9
4-9X10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-189-4691
Bearing And Bushing Inserter

121894691
325589011500: RNCC: 3 | RNVC: 2

29 Sep 1981

5120-12-380-4089
Spanner Wrench

123804089
1878256897: RNCC: 3 | RNVC: 2

27 Oct 2009

5120-12-309-8163
Swivel Knob Jeweler's Screwdriver

123098163
001-218.000-000W57: RNCC: 2 | RNVC: 2
001-218.000-000W57: RNCC: 3 | RNVC: 2

6 Mar 1987

5120-12-307-2616
Screwdriver Bit

123072616
TL5120-0132-G3: RNCC: 2 | RNVC: 2
992-T27: RNCC: 3 | RNVC: 2
54TX-T27: RNCC: 3 | RNVC: 2
3245-TX27: RNCC: 3 | RNVC: 2
ITX19-T27: RNCC: 3 | RNVC: 2
03100027: RNCC: 5 | RNVC: 2
00.50.22.75: RNCC: 5 | RNVC: 2
11714: RNCC: 5 | RNVC: 2
2487130003: RNCC: 5 | RNVC: 9
INXT19-27: RNCC: 5 | RNVC: 9

27 May 1986

5120-12-170-8417
Spanner Wrench

121708417
NO PRIMARY REF 12-170-8417: RNCC: 3 | RNVC: 2
213177: RNCC: 5 | RNVC: 2
213177: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-173-4218
Socket Wrench

121734218
DIN896-A18X19: RNCC: 2 | RNVC: 2
A18X19DIN896: RNCC: 5 | RNVC: 9

13 Apr 1978

5120-12-326-6886
Mechanical Puller Forcing Screw

123266886
602589003302: RNCC: 3 | RNVC: 2

22 Oct 1991

5120-12-042-5956

5120-12-041-5736

5120-12-199-1723
Mechanical Puller Adapter

121991723
82-1277W32: RNCC: 3 | RNVC: 2

3 Apr 1984

5120-12-193-0241
Socket Wrench Extension

121930241
NM 297-52: RNCC: 3 | RNVC: 2
NM297-52: RNCC: 5 | RNVC: 2
NM 297-52: RNCC: 5 | RNVC: 9
NM297-52: RNCC: 5 | RNVC: 9

15 Jun 1982

5120-12-382-2342
Spanner Wrench

123822342
81193: RNCC: 3 | RNVC: 2

26 May 2010

5120-12-146-5138
Dorn

121465138
1X56099064: RNCC: 3 | RNVC: 2
0535938: RNCC: 5 | RNVC: 2
535938: RNCC: 5 | RNVC: 9
V99064: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-309-4619
Montierhuelse

123094619
WW 428 163 A: RNCC: 3 | RNVC: 9
WW428163A: RNCC: 5 | RNVC: 9

27 Jan 1987

5120-12-368-7221
Socket Wrench Socket

123687221
771-L 5,5: RNCC: 3 | RNVC: 2
00.48.49.96: RNCC: 5 | RNVC: 2

10 Apr 2006

5120-12-129-5381
Socket Wrench Socket

121295381
065030: RNCC: 3 | RNVC: 2
25-1-8: RNCC: 3 | RNVC: 2
65-0-1-8: RNCC: 5 | RNVC: 9
20-299: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-191-1890
Aufsatz

121911890
1X56131386: RNCC: 3 | RNVC: 2
0535820: RNCC: 5 | RNVC: 2
535820: RNCC: 5 | RNVC: 9

18 Jan 1982

5120-12-368-8165
Pliers

123688165
2427 G-160 IP: RNCC: 3 | RNVC: 2
00.14.72.17: RNCC: 5 | RNVC: 2
0100743: RNCC: 5 | RNVC: 2

25 Apr 2006

5120-12-301-2934
Socket Head Screw Key

123012934
NO PRIMARY REF 12-301-2934: RNCC: 3 | RNVC: 2
1997ZBL-3/16: RNCC: 5 | RNVC: 9

5 Oct 1984

5120-12-309-0803
Spanner Wrench

123090803
5100258: RNCC: 2 | RNVC: 2

11 Dec 1986

5120-12-336-5849
Montierhuelse

123365849
0851 3733: RNCC: 3 | RNVC: 2
8513733: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-336-5851
Montierhuelse

123365851
0851 6515: RNCC: 3 | RNVC: 2
8516515: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-392-6835
Carrier Socket

123926835
CTP41001G001: RNCC: 3 | RNVC: 2

27 Jun 2013

5120-12-314-8447

5120-12-147-4004
Dorn

121474004
VG95211-ML-121474004: RNCC: 2 | RNVC: 2
160-88743-01: RNCC: 3 | RNVC: 2
160-88743-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-8604
Bl Spannbackensatz

123058604
PRG540-46: RNCC: 3 | RNVC: 2

27 Dec 1985

5120-12-331-6209
Hand Hammer

123316209
1952-50: RNCC: 3 | RNVC: 2
4929980024: RNCC: 5 | RNVC: 2

1 Jun 1993

5120-12-189-4828
Socket Head Screw Key

121894828
537152-9103.000: RNCC: 3 | RNVC: 2
5120121894828: RNCC: 5 | RNVC: 2
537152-9103: RNCC: 5 | RNVC: 9
537152-9103.000: RNCC: 5 | RNVC: 9

29 Sep 1981

5120-12-361-2079
Crimpzange Griff

123612079
80996250083: RNCC: 3 | RNVC: 2
80.99625-0083: RNCC: 5 | RNVC: 2

3 Sep 2003

5120-12-123-5952
Socket Wrench Crowfoot Attachment

121235952
AN8508-27: RNCC: 3 | RNVC: 2
105623: RNCC: 5 | RNVC: 9
1950Z1-11-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-6994
Socket Wrench Crowfoot Attachment

121816994
73-056-10.00: RNCC: 3 | RNVC: 2
73-056-10-00: RNCC: 5 | RNVC: 2
73-056A2: RNCC: 5 | RNVC: 2

10 Dec 1979

5120-12-139-3052
Schluessel

121393052
8205890509/00: RNCC: 3 | RNVC: 2
(241)A4249M55.093.004: RNCC: 5 | RNVC: 2
820589050900: RNCC: 5 | RNVC: 2
020M00600: RNCC: 5 | RNVC: 9
8205890509: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-325-5345
Mechanical Puller

123255345
8353389: RNCC: 3 | RNVC: 2

14 Jun 1991

5120-12-338-2532
Socket Wrench Screwdriver Attachment

123382532
TL5120-0102-172: RNCC: 2 | RNVC: 2
IN19L/8-120: RNCC: 3 | RNVC: 2
3210-INL 8X120: RNCC: 3 | RNVC: 2
DIN7422-8-12,5: RNCC: 5 | RNVC: 1
FV 2214137: RNCC: 5 | RNVC: 2
HEY584-751: RNCC: 5 | RNVC: 2
00.50.02.55: RNCC: 5 | RNVC: 2

12 Jun 1995

5120-12-121-5388
Tap And Reamer Wrench

121215388
514D003M5-12: RNCC: 3 | RNVC: 2
182-3: RNCC: 3 | RNVC: 2
83147: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-365-3414
Mechanical Puller

123653414
2300399-991010.000.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5120-12-327-0717
Brad Awl

123270717
300-1: RNCC: 3 | RNVC: 2

27 Nov 1991

5120-12-190-8433
Mechanical Puller Attachment

121908433
59-8: RNCC: 3 | RNVC: 2
5130700005: RNCC: 5 | RNVC: 2

17 Dec 1981

5120-12-123-5448
Socket Wrench

121235448
3359003002: RNCC: 3 | RNVC: 2
023E002-9: RNCC: 3 | RNVC: 2
A4802: RNCC: 5 | RNVC: 2
0005810201: RNCC: 5 | RNVC: 2
3303957: RNCC: 5 | RNVC: 2
583303957: RNCC: 5 | RNVC: 2
583303957: RNCC: 5 | RNVC: 9
583303957: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-1936
Ratchet Wrench

123811936
415SGB: RNCC: 3 | RNVC: 2
676650: RNCC: 5 | RNVC: 2
11130011: RNCC: 5 | RNVC: 2

19 Jan 2010

5120-12-139-6035
Schlagb Spanneisen

121396035
GF196052: RNCC: 3 | RNVC: 2
F1311-960520: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-350-2567
Bl Ausbeulwerkzeug

123502567
590/1: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-391-7789
Bearing And Bushing Remover

123917789
EB180.000: RNCC: 3 | RNVC: 2

5 Apr 2013

5120-12-369-0527
Inserted Hammer Face

123690527
3203030: RNCC: 3 | RNVC: 2
00.74.77.08: RNCC: 5 | RNVC: 2

17 May 2006

5120-12-370-4454
Oil Filter Wrench

123704454
LS 8: RNCC: 3 | RNVC: 2
401155800306: RNCC: 5 | RNVC: 2

8 Nov 2006

5120-12-123-5439

5120-12-346-5727
Eindrueckwerkzeug

123465727
41759-T600: RNCC: 3 | RNVC: 2

12 Aug 1998

5120-12-192-7707
Open End Wrench

121927707
116589010100: RNCC: 3 | RNVC: 2

24 May 1982

5120-12-311-1715
Woven Cable Grip

123111715
15409801: RNCC: 3 | RNVC: 2

3 Aug 1987

5120-12-323-7582
Aligning Punch

123237582
99370205: RNCC: 3 | RNVC: 2
370 205: RNCC: 5 | RNVC: 2

13 Dec 1990

5120-12-121-6895

5120-12-129-9738

5120-12-174-5331
Torque Wrench

121745331
NO PRIMARY REF 12-174-5331: RNCC: 3 | RNVC: 2
6980: RNCC: 5 | RNVC: 9
143979: RNCC: 5 | RNVC: 9

10 Jul 1978

5120-12-139-9502
Nietauftreiber

121399502
100129-9200.21: RNCC: 3 | RNVC: 2
100129-9200-21: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-388-8029
Spanner Wrench

123888029
34-409-00000: RNCC: 3 | RNVC: 2

24 Apr 2012

5120-12-390-1442
Torque Wrench Adapter

123901442
1299859: RNCC: 3 | RNVC: 2

10 Oct 2012

5120-12-092-2435

5120-12-161-8167

5120-12-370-3105
Mechanical Puller Attachment

123703105
463589053400: RNCC: 3 | RNVC: 2

25 Oct 2006

5120-12-344-0991
Socket Wrench Socket

123440991
0851 6687: RNCC: 3 | RNVC: 2
8516687: RNCC: 5 | RNVC: 2

11 Sep 1997

5120-12-139-2474
Spanner Wrench

121392474
023M09300: RNCC: 3 | RNVC: 2
VM65972: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-362-7727
Mechanical Puller

123627727
129-0: RNCC: 3 | RNVC: 2
7145229: RNCC: 3 | RNVC: 2

30 Mar 2004

5120-12-126-2607
Quick Adjusting Screw Clamp

121262607
D30-25: RNCC: 3 | RNVC: 2
TG40T25: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-1320

5120-12-143-8895
Schluessel

121438895
0875-9850-000: RNCC: 3 | RNVC: 2
0875-9850-000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-192-6511
Retaining Ring Pliers

121926511
NM277-03C: RNCC: 3 | RNVC: 2
NM277-03C: RNCC: 5 | RNVC: 9

12 May 1982

5120-12-123-5136
Open End Wrench

121235136
NO PRIMARY REF 12-123-5136: RNCC: 3 | RNVC: 2
1-65X70: RNCC: 5 | RNVC: 9
40016570: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5557

5120-12-379-6106
Mechanical Puller

123796106
25476: RNCC: 3 | RNVC: 2

14 Aug 2009

5120-12-310-7325
Socket Head Screw Key

123107325
510027: RNCC: 2 | RNVC: 9

25 Jun 1987

5120-12-382-7848
Cross Tip Screwdriver

123827848
46360004-TCS: RNCC: 3 | RNVC: 2

9 Aug 2010

5120-12-021-2460

5120-12-351-9116
Jewelers' Pliers

123519116
3721125: RNCC: 3 | RNVC: 2
3-633-8: RNCC: 3 | RNVC: 2

14 Sep 2000

5120-12-130-8025
Screwdriver Bit

121308025
C20407-Z7-C16: RNCC: 3 | RNVC: 2
TFS70-04604: RNCC: 5 | RNVC: 2
C20407Z7C16: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5198

5120-12-370-0393
Montierhuelse

123700393
349966: RNCC: 3 | RNVC: 2

7 Sep 2006

5120-12-332-3804
Torque Wrench

123323804
CHA-5-EHA-5,5: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-12-335-3757
Heber Stuetze

123353757
2300223-264340.00.0: RNCC: 2 | RNVC: 2
2300223-264340.00.0: RNCC: 3 | RNVC: 2
WRSOM0479: RNCC: 3 | RNVC: 2

15 Aug 1994

5120-12-338-4021
Torque Wrench Adapter

123384021
8169: RNCC: 3 | RNVC: 2
2.72-34 348: RNCC: 5 | RNVC: 2

4 Jul 1995

5120-12-380-5304
Spanner Wrench

123805304
1878256884: RNCC: 3 | RNVC: 2

5 Nov 2009

5120-12-133-3883
Combination Box And Open End Wrench

121333883
1952Z1: RNCC: 3 | RNVC: 2
87AF1: RNCC: 3 | RNVC: 2
1B 1.AF: RNCC: 3 | RNVC: 2
205AF1: RNCC: 5 | RNVC: 2
105760: RNCC: 5 | RNVC: 2
600652: RNCC: 5 | RNVC: 2
6006520: RNCC: 5 | RNVC: 2
40504848: RNCC: 5 | RNVC: 2
TA475: RNCC: 5 | RNVC: 2
14A1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-386-2298
Slip Joint Pliers

123862298
7.0533: RNCC: 3 | RNVC: 2

17 Aug 2011

5120-12-196-1532
Ausdrueckwerkzeug

121961532
VG95211-ML-121961532: RNCC: 2 | RNVC: 2
1.3-4049-407: RNCC: 3 | RNVC: 2
MAGERD 8696: RNCC: 5 | RNVC: 9

7 Jun 1983

5120-12-344-0107
Socket Wrench Adapter

123440107
30140001: RNCC: 3 | RNVC: 2

28 Aug 1997

5120-12-150-4290
Feststellvorrichtun

121504290
838589043100: RNCC: 3 | RNVC: 2
8385890431: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-390-2843
Mechanical Puller Forcing Screw

123902843
F6341176: RNCC: 3 | RNVC: 2

25 Oct 2012

5120-12-144-6086
Socket Wrench

121446086
8375890409-00: RNCC: 3 | RNVC: 2
8375890409: RNCC: 5 | RNVC: 2
837589040900: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-382-8678
Socket Head Screw Key

123828678
43250020-TCS: RNCC: 3 | RNVC: 2

18 Aug 2010

5120-12-198-2848
Mechanical Puller Attachment

121982848
320-997 536: RNCC: 3 | RNVC: 2
320-997536: RNCC: 3 | RNVC: 2

10 Jan 1984

5120-12-303-7853
Spanner Wrench

123037853
009-030.140-022W7: RNCC: 3 | RNVC: 2
12790-120000.022: RNCC: 5 | RNVC: 2

26 Apr 1985

5120-12-131-4970
Socket Wrench

121314970
NO PRIMARY REF 12-131-4970: RNCC: 3 | RNVC: 2
129800: RNCC: 5 | RNVC: 9
1945UM5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-173-0334
Spanner Wrench

121730334
702993-0181901: RNCC: 3 | RNVC: 2
702993-0181.901: RNCC: 5 | RNVC: 2

15 Mar 1978

5120-12-147-5921
Schluessel

121475921
2895034: RNCC: 3 | RNVC: 2
2895-034: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-369-1122
Verspannvorrichtung

123691122
0986612408: RNCC: 3 | RNVC: 2

23 May 2006

5120-12-325-2246
Bearing And Bushing Inserter

123252246
0852 4748: RNCC: 3 | RNVC: 2
8524748: RNCC: 5 | RNVC: 2

17 May 1991

5120-12-021-2498

5120-12-093-7794

5120-12-126-4905
Hand Tube Flaring Tool

121264905
NO PRIMARY REF 12-126-4905: RNCC: 3 | RNVC: 2
163: RNCC: 5 | RNVC: 9
96630113: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-137-4144
Socket Wrench

121374144
510073-07: RNCC: 2 | RNVC: 2
40126522: RNCC: 3 | RNVC: 2
5180-137-9: RNCC: 5 | RNVC: 9
TL5180-0137-9: RNCC: 5 | RNVC: 9
5180-0137-9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-317-1036
Hand Tube Flaring Punch

123171036
MOS-L 10-S: RNCC: 3 | RNVC: 2
MOS-I 10-S: RNCC: 5 | RNVC: 9

10 Mar 1989

5120-12-195-6984
Jaw Cable Grip

121956984
4001900-00232: RNCC: 3 | RNVC: 2

30 Mar 1983

5120-12-370-3737
Plier Wrench

123703737
757-5: RNCC: 3 | RNVC: 2
6564-145: RNCC: 3 | RNVC: 2
65642145: RNCC: 5 | RNVC: 2

31 Oct 2006

5120-12-193-5157
Spanner Wrench

121935157
5120700050: RNCC: 3 | RNVC: 2
51920: RNCC: 3 | RNVC: 2
051920: RNCC: 5 | RNVC: 2
52107110: RNCC: 5 | RNVC: 2
776C-155-230/10: RNCC: 5 | RNVC: 2
051920: RNCC: 5 | RNVC: 2
051920: RNCC: 5 | RNVC: 9

29 Jul 1982

5120-12-124-7669
Sewing Palm

121247669
TK5120-004AUSFA: RNCC: 2 | RNVC: 2
TK-SG34-5120-042AUSFA: RNCC: 5 | RNVC: 9
5120-0041ITEMA: RNCC: 5 | RNVC: 9
5120-041ITEMA: RNCC: 5 | RNVC: 9
TL5120-0041ITEMA: RNCC: 5 | RNVC: 9
5120-90902: RNCC: 6 | RNVC: 9
5120-90902: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-331-0182
Torque Wrench

123310182
NO PRIMARY REF 12-331-0182: RNCC: 3 | RNVC: 2
2098-0753-54: RNCC: 5 | RNVC: 9

11 Mar 1993

5120-12-700-4442
Electronic Equipment Alignment Tool

127004442
51-087307084: RNCC: 2 | RNVC: 2
IW8.675.002: RNCC: 5 | RNVC: 9

5 Jun 1992

5120-12-343-4665
Crimping Tool Die

123434665
VG95236T25A0004: RNCC: 2 | RNVC: 2
8400-2281: RNCC: 3 | RNVC: 2

24 Jun 1997

5120-12-133-3605
Schluessel

121333605
186-181: RNCC: 3 | RNVC: 2
S533E14: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-132-1117
Flat Tip Screwdriver

121321117
AWENTW2544TZ37: RNCC: 3 | RNVC: 2
AWENTW2544TZ37: RNCC: 5 | RNVC: 2
AWENTW2544TZ37: RNCC: 5 | RNVC: 2
AWENTW2544TZ37: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-368-1027
Socket Head Screw Key

123681027
43260008-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-175-7798
Socket Wrench

121757798
33/13: RNCC: 3 | RNVC: 2
6-164: RNCC: 3 | RNVC: 9
425-13: RNCC: 3 | RNVC: 9
05410013: RNCC: 3 | RNVC: 9
50450: RNCC: 5 | RNVC: 2
33BPN13: RNCC: 5 | RNVC: 9
1930110027: RNCC: 5 | RNVC: 9

16 Oct 1978

5120-12-185-0732
Mechanical Puller

121850732
VW236: RNCC: 3 | RNVC: 2
3910-64001-020: RNCC: 5 | RNVC: 2

6 Sep 1980

5120-12-191-5204
Mechanisch Traverse

121915204
01840003: RNCC: 3 | RNVC: 2
018 400 03: RNCC: 3 | RNVC: 2
6008R-1800.00.0T2: RNCC: 5 | RNVC: 2
6008R-1800.00.0T2: RNCC: 5 | RNVC: 2

8 Feb 1982

5120-12-391-0559
Mounting Punch

123910559
F6557159: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-12-363-9839
Bearing And Bushing Inserter

123639839
T671P5002248: RNCC: 3 | RNVC: 2

10 Aug 2004

5120-12-123-5063
Open End Wrench

30 May 1969

5120-12-356-8472
Swivel Knob Jeweler's Screwdriver

123568472
267-T4: RNCC: 3 | RNVC: 2
20123: RNCC: 5 | RNVC: 2
20123: RNCC: 5 | RNVC: 2
267-T4: RNCC: 5 | RNVC: 2

10 Apr 2002

5120-12-163-6098
Spanner Wrench

121636098
VG95211-ML-121636098: RNCC: 2 | RNVC: 2
105-60701W1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-185-5513
Hand Hammer

121855513
TL5120-0126-A5: RNCC: 2 | RNVC: 2
3007125: RNCC: 3 | RNVC: 2
3007.125: RNCC: 5 | RNVC: 2
5120-02072: RNCC: 6 | RNVC: 9

14 Oct 1980

5120-12-126-4677
Electronic Equipment Alignment Tool

121264677
NO PRIMARY REF 12-126-4677: RNCC: 3 | RNVC: 2
108687: RNCC: 5 | RNVC: 9
5508: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-325-9996
Bearing And Bushing Inserter And Remover

123259996
460589013500: RNCC: 3 | RNVC: 2

29 Jul 1991

5120-12-178-9380
Einbauwerkzeug

121789380
667803310802: RNCC: 2 | RNVC: 2

25 May 1979

5120-12-040-6762

5120-12-152-3452
Hand Hydraulic Jack

121523452
SK1714: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-4917
Saddler's Harness Awl Blade

121264917
TL5120-0114-5: RNCC: 2 | RNVC: 2
264-60MM: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-187-6926
Rack Bar Jack

121876926
5801411-45: RNCC: 3 | RNVC: 2

29 Apr 1981

5120-12-338-3066
Hand Hammer

123383066
321-1500: RNCC: 3 | RNVC: 2
32100-1500: RNCC: 5 | RNVC: 2
0032100-1500: RNCC: 5 | RNVC: 2

20 Jun 1995

5120-12-352-3875
Schluessel

123523875
820589346100: RNCC: 3 | RNVC: 2

14 Nov 2000

5120-12-126-4922

5120-12-042-5958

5120-12-194-0803
Torque Wrench Adapter

121940803
TL5120-0086-010: RNCC: 2 | RNVC: 2
7452-7 7: RNCC: 5 | RNVC: 9
6263110001: RNCC: 5 | RNVC: 9
20/DC-7: RNCC: 5 | RNVC: 9
6450C-7: RNCC: 5 | RNVC: 9
731/10 7: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-306-1808
Lifting Pneumatic Bag Kit

123061808
1310 0057 00: RNCC: 3 | RNVC: 2
1310005700: RNCC: 5 | RNVC: 2
136 00 000: RNCC: 5 | RNVC: 9

4 Feb 1986

5120-12-391-4360
Open End Wrench

123914360
6672930: RNCC: 3 | RNVC: 2
04010886667293: RNCC: 5 | RNVC: 2
DS 3114 32: RNCC: 5 | RNVC: 2
6672930: RNCC: 5 | RNVC: 2
DS 3114 32: RNCC: 5 | RNVC: 2
04010886667293: RNCC: 5 | RNVC: 2
4010886667293: RNCC: 5 | RNVC: 9
4010886667293: RNCC: 5 | RNVC: 9

12 Mar 2013

5120-12-123-5020

5120-12-149-5289
Hand Hammer

121495289
252-22: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-393-9737
Cross Tip Screwdriver

123939737
575-PH1: RNCC: 3 | RNVC: 2
9209336: RNCC: 5 | RNVC: 2

25 Oct 2013

5120-12-121-4891
Open End Wrench

121214891
TL5120-0101-240: RNCC: 2 | RNVC: 2
12A11-32: RNCC: 3 | RNVC: 2
40462222: RNCC: 5 | RNVC: 2
2209-31: RNCC: 5 | RNVC: 9
104974: RNCC: 5 | RNVC: 9
1931Z11-32: RNCC: 5 | RNVC: 9
1931Z11/32: RNCC: 5 | RNVC: 9
TK-KG55-5120-354-240: RNCC: 5 | RNVC: 9
TK5120-354-240: RNCC: 5 | RNVC: 9
TL5120-0082-490: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-141-9796
Spanner Wrench

121419796
756 7-40 2,5X4: RNCC: 3 | RNVC: 2
571G401B2-5D: RNCC: 5 | RNVC: 2
62860-2,5: RNCC: 5 | RNVC: 2
40493: RNCC: 5 | RNVC: 2
756-2,5-UITV-D: RNCC: 5 | RNVC: 2
628600-2,5: RNCC: 5 | RNVC: 2
40568: RNCC: 5 | RNVC: 2
756-2-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-369-7392
Mechanical Puller

123697392
655589003500: RNCC: 3 | RNVC: 2
7083663: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-192-7916
Screwdriver Bit

121927916
NO PRIMARY REF 12-192-7916: RNCC: 3 | RNVC: 2
2058PR2: RNCC: 5 | RNVC: 9

24 May 1982

5120-12-325-9019
Combination Box And Open End Wrench

123259019
2060060: RNCC: 3 | RNVC: 2

22 Jul 1991

5120-12-150-3957
Kegel Spannbruecke

121503957
1X46104947: RNCC: 3 | RNVC: 2
V104947: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-8574
Abziehvorrichtung

121398574
3125890633: RNCC: 3 | RNVC: 2
312589063300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-319-4359
Lager- Und Einsatz

123194359
99366641: RNCC: 3 | RNVC: 2

2 Oct 1989

5120-12-194-4890
Ha Spannvorrichtung

121944890
F6273900: RNCC: 3 | RNVC: 2
S6273900: RNCC: 5 | RNVC: 2
F601051273900: RNCC: 5 | RNVC: 9

9 Nov 1982

5120-12-123-5398
Socket Wrench

121235398
DIN896-B22X24: RNCC: 2 | RNVC: 2
26R22X24: RNCC: 3 | RNVC: 2
B22X24DIN896: RNCC: 5 | RNVC: 2
DIN896B22X24: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-186-5774
Screwdriver Bit

121865774
NO PRIMARY REF 12-186-5774: RNCC: 3 | RNVC: 2
1155: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-12-391-3020
Torque Wrench Multiplier

123913020
MP300-5000: RNCC: 3 | RNVC: 2
53035000: RNCC: 5 | RNVC: 2

4 Mar 2013

5120-12-371-6025
Combination Box And Open End Wrench

123716025
111Z-1/2: RNCC: 3 | RNVC: 2

24 Apr 2007

5120-12-120-5137
Hand Saw Set

121205137
656B204-0-5-2-5: RNCC: 3 | RNVC: 2
656B204: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-172-2503
Einstellwerkzeug

121722503
089-427-0000: RNCC: 3 | RNVC: 2
089-427-0000: RNCC: 5 | RNVC: 9

4 Jan 1978

5120-12-324-4519
Hand Beading Tool

123244519
VN210-3: RNCC: 3 | RNVC: 2
NV1-030749-3: RNCC: 5 | RNVC: 2

18 Feb 1991

5120-12-333-6025
Socket Wrench Socket

123336025
984714: RNCC: 3 | RNVC: 2
9847-14: RNCC: 5 | RNVC: 9

12 Jan 1994

5120-12-090-5469

5120-12-135-7865
Socket Wrench

121357865
194405: RNCC: 3 | RNVC: 2
194405: RNCC: 5 | RNVC: 9
3-415-0-018-038-4: RNCC: 5 | RNVC: 9
194405: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-700-4296
Gl Montierwerkzeug

127004296
865.93SB6696: RNCC: 2 | RNVC: 2

13 May 1992

5120-12-361-6951
Hand Terminal Crimping Tool

123616951
55647.106.859: RNCC: 3 | RNVC: 2
55647.106.859: RNCC: 5 | RNVC: 2
AZ859: RNCC: 5 | RNVC: 2

4 Nov 2003

5120-12-380-2265
Hand Roller

123802265
125.475: RNCC: 3 | RNVC: 2
4113001: RNCC: 5 | RNVC: 2

8 Oct 2009

5120-12-390-1204
Bearing And Bushing Inserter

123901204
405589171500: RNCC: 3 | RNVC: 2

8 Oct 2012

5120-12-134-4651

5120-12-090-1465

5120-12-345-5568
Schluesseleinsatz

123455568
62.7000.196.01-A001: RNCC: 3 | RNVC: 2

31 Mar 1998

5120-12-311-1331
Lager- Und Einsatz

123111331
425589034300: RNCC: 3 | RNVC: 2

29 Jul 1987

5120-12-330-7157
Mechanical Puller Attachment

123307157
0851 6224.004: RNCC: 3 | RNVC: 2
8516224.004: RNCC: 5 | RNVC: 2

29 Jan 1993

5120-12-347-5571
Seal Inserter

123475571
317 589 08 15 00: RNCC: 3 | RNVC: 2
317589081500: RNCC: 5 | RNVC: 2

6 Jan 1999

5120-12-021-6830

5120-12-126-4945

5120-12-337-1481
Montierhuelse

123371481
0852 1363: RNCC: 3 | RNVC: 2
8521363: RNCC: 5 | RNVC: 2

25 Jan 1995

5120-12-143-5756
Schluessel

121435756
100109-9118: RNCC: 2 | RNVC: 2
100109-9118: RNCC: 5 | RNVC: 2
100109-9118: RNCC: 5 | RNVC: 2
100109-9118: RNCC: 5 | RNVC: 2
100109-9118: RNCC: 5 | RNVC: 9
100109-9118: RNCC: 5 | RNVC: 9
100109-9118: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-140-3057
Socket Wrench Socket

121403057
53-19: RNCC: 3 | RNVC: 2
03040019: RNCC: 5 | RNVC: 2
109947: RNCC: 5 | RNVC: 9
7810SM19: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-370-9999
Pliers

123709999
3-445-2: RNCC: 3 | RNVC: 2

24 Jan 2007

5120-12-313-2364
Spanner Wrench

123132364
2300223-264090.00.0: RNCC: 2 | RNVC: 2
2300223-264090.00.0: RNCC: 3 | RNVC: 2

12 Mar 1988

5120-12-387-4984
Dispenser Proportioner Nozzle

123874984
51.000.073: RNCC: 3 | RNVC: 2
51.000.073: RNCC: 5 | RNVC: 2

3 Jan 2012

5120-12-149-5301
Schluessel

121495301
7748J: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-094-0357

5120-12-070-0093

5120-12-178-0706
Box Wrench

121780706
NM287-01: RNCC: 3 | RNVC: 2
NM287-01: RNCC: 5 | RNVC: 9

16 Mar 1979

5120-12-170-1046
Spanner Wrench

121701046
12709-12000W1: RNCC: 3 | RNVC: 2
335912-9009.000: RNCC: 3 | RNVC: 2
12709-12000W1: RNCC: 5 | RNVC: 2
12709-12000W1: RNCC: 5 | RNVC: 9
335912-9009.000: RNCC: 5 | RNVC: 9

27 Jun 1977

5120-12-180-9046
Sheet Metalworking Dolly Block

121809046
NO PRIMARY REF 12-180-9046: RNCC: 3 | RNVC: 2
3732: RNCC: 5 | RNVC: 9

11 Oct 1979

5120-12-317-1473
Crimping Tool Die

123171473
300438443: RNCC: 3 | RNVC: 2

14 Mar 1989

5120-12-171-4077
Mehrzweckspa Blatt

121714077
510022-0-01AND510022-0-03: RNCC: 2 | RNVC: 9
510022-0-01AND510022-0-03: RNCC: 3 | RNVC: 9

7 Oct 1977

5120-12-194-8849
Handbe Grundplatte

121948849
5100225-110: RNCC: 2 | RNVC: 2
5100225-110: RNCC: 3 | RNVC: 2

15 Dec 1982

5120-12-351-9590
Socket Head Screw Key

123519590
ISO2936-12L: RNCC: 2 | RNVC: 2
07153128: RNCC: 3 | RNVC: 2

20 Sep 2000

5120-12-311-4668
Socket Wrench

123114668
171012219A: RNCC: 3 | RNVC: 2

7 Sep 1987

5120-12-356-4914
Montierdorn

123564914
MTDL2060M5000XXXXX: RNCC: 3 | RNVC: 2

5 Mar 2002

5120-12-345-3534
Spanner Wrench

123453534
009-017.418-020W2: RNCC: 3 | RNVC: 2

4 Mar 1998

5120-12-196-4630
Open End Wrench

121964630
50041084: RNCC: 3 | RNVC: 2
50041084: RNCC: 5 | RNVC: 9

11 Jul 1983

5120-12-312-2337
Pliers

123122337
1816VDE-22: RNCC: 3 | RNVC: 2
2458VDE: RNCC: 3 | RNVC: 2
158682: RNCC: 5 | RNVC: 2

7 Dec 1987

5120-12-363-2363
Torque Wrench Adapter

123632363
F30377259: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-328-6976
Mechanical Puller

123286976
F6378995: RNCC: 3 | RNVC: 2

16 Jun 1992

5120-12-387-0187
Spanner Wrench

123870187
T251M4800201: RNCC: 3 | RNVC: 2

26 Oct 2011

5120-12-133-4466

5120-12-129-1389
Crowfoot Wrench Head Socket

121291389
NO PRIMARY REF 12-129-1389: RNCC: 3 | RNVC: 2
108396: RNCC: 5 | RNVC: 9
5130Z13-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-342-7341
Hand Screw Jack

123427341
3A0 011 031 B: RNCC: 3 | RNVC: 2

20 Mar 1997

5120-12-368-9509
Hand Tube Bender

123689509
2.4526: RNCC: 3 | RNVC: 2
00.16.52.03: RNCC: 5 | RNVC: 2
24.516: RNCC: 5 | RNVC: 9

9 May 2006

5120-12-387-5561
Swivel Knob Jeweler's Screwdriver Set

123875561
4-610: RNCC: 3 | RNVC: 2

9 Jan 2012

5120-12-369-5304
Socket Wrench Socket Set

123695304
50TX/7: RNCC: 3 | RNVC: 2
4018754079926: RNCC: 5 | RNVC: 2
96032703: RNCC: 5 | RNVC: 2

18 Jul 2006

5120-12-198-2420
Instandsetzungshalt

121982420
5100234: RNCC: 2 | RNVC: 2
11009/2: RNCC: 5 | RNVC: 2
5100234: RNCC: 5 | RNVC: 2

5 Jan 1984

5120-12-316-8205
Open End Wrench

123168205
1953 C-M 13X14: RNCC: 3 | RNVC: 9

15 Feb 1989

5120-12-373-5894
Mechanical Puller Forcing Screw

123735894
80996150007: RNCC: 3 | RNVC: 2
80.99615-0007: RNCC: 5 | RNVC: 2

19 Nov 2007

5120-12-137-0821
Socket Wrench

121370821
DIN3112-14: RNCC: 2 | RNVC: 2
14DIN3112: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-370-3953
Torque Wrench

123703953
284: RNCC: 3 | RNVC: 2

2 Nov 2006

5120-12-317-9541
Plier Wrench

123179541
1000089-80000: RNCC: 2 | RNVC: 2
1000089-80000: RNCC: 3 | RNVC: 2

29 May 1989

5120-12-094-1215

5120-12-181-6871
Steckschluesseleins

121816871
VW170: RNCC: 3 | RNVC: 9

10 Dec 1979

5120-12-334-9345
Lager- Und B Griff

123349345
169194304: RNCC: 3 | RNVC: 2
E169194304: RNCC: 5 | RNVC: 2

5 Jul 1994

5120-12-353-8752
Socket Wrench Handle

123538752
000589281601: RNCC: 3 | RNVC: 2

16 May 2001

5120-12-346-2271
Electrical Contact Inserter

123462271
280-440: RNCC: 3 | RNVC: 2

30 Jun 1998

5120-12-133-3672
Box Wrench

121333672
23A5-8X11-16: RNCC: 3 | RNVC: 2
41473638: RNCC: 5 | RNVC: 2
1300Z5-8X11-16: RNCC: 5 | RNVC: 9
135130: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-370-1724
Cross Tip Screwdriver

123701724
113PZ2: RNCC: 3 | RNVC: 2
01.72.42.73: RNCC: 5 | RNVC: 2
11318: RNCC: 5 | RNVC: 2
4001002113183: RNCC: 5 | RNVC: 2

27 Sep 2006

5120-12-369-5331
Mechanical Puller Adapter

123695331
80996020140: RNCC: 3 | RNVC: 2
80.99602-0140: RNCC: 5 | RNVC: 2

19 Jul 2006

5120-12-123-5191
Open End Wrench

121235191
571A103B11-16IN: RNCC: 3 | RNVC: 2
610A22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-369-2687
Eindrueckwerkzeug

123692687
80996040218: RNCC: 3 | RNVC: 2
80.99604-0218: RNCC: 5 | RNVC: 2

13 Jun 2006

5120-12-163-8275
Mechanical Puller

121638275
20049: RNCC: 3 | RNVC: 2
80.99601-0031: RNCC: 5 | RNVC: 2
80996010031: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-172-4457
Ratchet Screwdriver

121724457
235: RNCC: 3 | RNVC: 2
1350: RNCC: 3 | RNVC: 2
2602-310: RNCC: 3 | RNVC: 9
DRILL135: RNCC: 5 | RNVC: 2

19 Jan 1978

5120-12-330-5528
Stud Inserter

123305528
0851 0468: RNCC: 3 | RNVC: 2
8510468: RNCC: 5 | RNVC: 2

8 Jan 1993

5120-12-320-0794
Seal Inserter

123200794
19.0247.390.1002: RNCC: 3 | RNVC: 2
19.0247.390.1002: RNCC: 5 | RNVC: 9

5 Dec 1989

5120-12-374-0865
Montierhuelse

123740865
T15301: RNCC: 3 | RNVC: 2

16 Jan 2008

5120-12-133-3676
Box Wrench

121333676
1300Z25-32X13-16: RNCC: 3 | RNVC: 2
104002: RNCC: 5 | RNVC: 2
625A25/32X13/16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-382-7607
Slee Mounting Tool

123827607
0826491: RNCC: 3 | RNVC: 2
4046356426367: RNCC: 5 | RNVC: 2

5 Aug 2010

5120-12-190-8800
Socket Wrench Crowfoot Attachment

121908800
S51571-0000: RNCC: 3 | RNVC: 2

21 Dec 1981

5120-12-363-8706
C Clamp

123638706
T670P5001106: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-314-0320
Ratchet Wrench

123140320
31KR23: RNCC: 3 | RNVC: 2
625 469: RNCC: 5 | RNVC: 2

31 May 1988

5120-12-317-4327
Flat Tip Screwdriver

123174327
60108: RNCC: 3 | RNVC: 2
11011: RNCC: 3 | RNVC: 9
01.71.68.96: RNCC: 5 | RNVC: 2
4001002601086: RNCC: 5 | RNVC: 2
1678A1,2X8-175: RNCC: 5 | RNVC: 9

6 Apr 1989

5120-12-361-4282
Spindel Fuehrung

123614282
CBD45082P01: RNCC: 3 | RNVC: 2

29 Sep 2003

5120-12-368-7690
Open End Box Wrench

123687690
121A-7/16X1/2: RNCC: 3 | RNVC: 2
00.28.04.88: RNCC: 5 | RNVC: 2

18 Apr 2006

5120-12-393-2079
Torque Wrench

123932079
3300030000: RNCC: 3 | RNVC: 2
DSK-0/3: RNCC: 5 | RNVC: 2

19 Aug 2013

5120-12-312-3055
Mechanical Puller Attachment

123123055
142750-1: RNCC: 3 | RNVC: 2
80996060265: RNCC: 5 | RNVC: 2

15 Dec 1987

5120-12-314-0806
Spanner Wrench

123140806
TK-WT41-4910-001-6: RNCC: 2 | RNVC: 2
2587: RNCC: 3 | RNVC: 2
V159: RNCC: 3 | RNVC: 2
5798980005: RNCC: 5 | RNVC: 2
V159: RNCC: 5 | RNVC: 2
V159: RNCC: 5 | RNVC: 2
C 6799 117: RNCC: 5 | RNVC: 2
MATRA V159: RNCC: 5 | RNVC: 9
V/159: RNCC: 5 | RNVC: 9

4 Jun 1988

5120-12-150-3936
Einstellvorrichtung

121503936
1X46095104: RNCC: 3 | RNVC: 2
V95104: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-307-1639
Mechanical Puller

123071639
3092: RNCC: 3 | RNVC: 2
S82-9: RNCC: 5 | RNVC: 2

15 May 1986

5120-12-198-2842
St Montierwerkzeug

121982842
KDEP1505: RNCC: 3 | RNVC: 2
0535341: RNCC: 5 | RNVC: 2
535341: RNCC: 5 | RNVC: 9

10 Jan 1984

5120-12-130-5699
Manual Impact Wrench

121305699
05072025001: RNCC: 3 | RNVC: 2
2100: RNCC: 5 | RNVC: 2
52950-020: RNCC: 5 | RNVC: 2
72025: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-7198
Torque Wrench Adapter

123407198
7112-11/16: RNCC: 3 | RNVC: 2
731A/10-11/16: RNCC: 3 | RNVC: 2
1547348: RNCC: 5 | RNVC: 2
58611038: RNCC: 5 | RNVC: 2
TA488: RNCC: 5 | RNVC: 2

30 May 1996

5120-12-367-6027
Screwdriver Bit

123676027
3243-TX40: RNCC: 3 | RNVC: 2
00.45.24.62: RNCC: 5 | RNVC: 2

8 Sep 2005

5120-12-367-6329
Hand Beading Tool

123676329
TUB UG642: RNCC: 3 | RNVC: 2

15 Sep 2005

5120-12-363-9553
Bearing And Bushing Inserter

123639553
T671P5002115: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-378-6739
Solid Center Punch

123786739
HF1290: RNCC: 3 | RNVC: 2
01.55.25.05: RNCC: 5 | RNVC: 2

30 Apr 2009

5120-12-041-5634

5120-12-194-5135
Mechanical Puller Step Plate

121945135
105-14181W3.01: RNCC: 3 | RNVC: 2
105-14181W3-01: RNCC: 5 | RNVC: 2

10 Nov 1982

5120-12-388-9295
Mounting Sleeve

123889295
80996160109: RNCC: 3 | RNVC: 2
80.99616-0109: RNCC: 5 | RNVC: 2

8 May 2012

5120-12-383-6746
Ge Montierwerkzeug

123836746
1X56.095.051: RNCC: 3 | RNVC: 2

24 Nov 2010

5120-12-130-9343
Socket Wrench Socket

121309343
NO PRIMARY REF 12-130-9343: RNCC: 3 | RNVC: 2
109580: RNCC: 5 | RNVC: 9
7420Z9-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-187-3373
Socket Wrench Socket

121873373
50-12-BSW9/16: RNCC: 3 | RNVC: 2
D19-9/16W: RNCC: 3 | RNVC: 2
40750208: RNCC: 3 | RNVC: 2
00050071083: RNCC: 5 | RNVC: 2
TVA5130-2-263-015.1.1.3: RNCC: 5 | RNVC: 2
900W29-16: RNCC: 5 | RNVC: 9
900WZ9/16: RNCC: 5 | RNVC: 9
50E9/16: RNCC: 5 | RNVC: 9

30 Mar 1981

5120-12-380-6339
Rotat Holding Tool

123806339
316925: RNCC: 3 | RNVC: 2
0856-02-15-00/39: RNCC: 5 | RNVC: 2

16 Nov 2009

5120-12-324-6605
Hand Beading Tool

123246605
VN209-3: RNCC: 3 | RNVC: 2
MOV1-030615-3: RNCC: 5 | RNVC: 2

12 Mar 1991

5120-12-344-6005
Ge Montierwerkzeug

123446005
1X56136466: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-321-7859
Bearing And Bushing Inserter And Remover

123217859
41408-T602: RNCC: 3 | RNVC: 2

26 Jun 1990

5120-12-368-1973
Socket Wrench Socket

123681973
02410032-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-344-8270
Sp Montierwerkzeug

123448270
588.00-009000-110: RNCC: 3 | RNVC: 2

15 Dec 1997

5120-12-155-9061
Marlinespike

121559061
NM111-03: RNCC: 3 | RNVC: 2
NM111-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-3862
Stud Inserter And Remover

121353862
NO PRIMARY REF 12-135-3862: RNCC: 3 | RNVC: 2
109613: RNCC: 5 | RNVC: 9
7491: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-2138
Halter

121712138
81.66850-5004: RNCC: 3 | RNVC: 2
81668505004: RNCC: 3 | RNVC: 2

19 Sep 1977

5120-12-338-4627
Op Montierwerkzeug

123384627
VG95211-ML-123384627: RNCC: 2 | RNVC: 2
752-5993-004: RNCC: 3 | RNVC: 9
4940-08806: RNCC: 6 | RNVC: 9

13 Jul 1995

5120-12-360-1101
Ausdrueckwerkzeug

123601101
Y4 097638: RNCC: 3 | RNVC: 2

8 Apr 2003

5120-12-181-3942
Spannschluessel

121813942
309589006302: RNCC: 3 | RNVC: 9

19 Nov 1979

5120-12-167-9757
Open End Wrench

121679757
NO PRIMARY REF 12-167-9757: RNCC: 3 | RNVC: 2
229342: RNCC: 5 | RNVC: 9
8M4-5: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-144-0792
Communications Equipment Spring Adjuster

121440792
NO PRIMARY REF 12-144-0792: RNCC: 3 | RNVC: 2
108407: RNCC: 5 | RNVC: 9
5400B: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-356-8470
Montierhuelse

123568470
E102547/13: RNCC: 3 | RNVC: 2

10 Apr 2002

5120-12-356-0866
Torque Wrench

123560866
760/60-3115: RNCC: 3 | RNVC: 2
51040060: RNCC: 5 | RNVC: 2
5120-01132: RNCC: 6 | RNVC: 9

21 Jan 2002

5120-12-354-5649
Schluessel

123545649
4.901-061.0: RNCC: 3 | RNVC: 2

3 Aug 2001

5120-12-392-0495
Ball Joint Removal Tool

123920495
KL-0165-3 A: RNCC: 3 | RNVC: 2

29 Apr 2013

5120-12-194-0455
Torque Wrench Adapter

121940455
TL5120-0086-950: RNCC: 2 | RNVC: 2
6416: RNCC: 3 | RNVC: 2
6264410002: RNCC: 5 | RNVC: 2
28/DCA-3/4: RNCC: 5 | RNVC: 9
734-40: RNCC: 5 | RNVC: 9
734/40: RNCC: 5 | RNVC: 9

27 Sep 1982

5120-12-387-3123
Socket Head Screw Key

123873123
1884158: RNCC: 3 | RNVC: 2
1884158: RNCC: 5 | RNVC: 2
NC 42 3/32AF: RNCC: 5 | RNVC: 2
NC 42 3/32AF: RNCC: 5 | RNVC: 2

28 Nov 2011

5120-12-171-3439
Flat Tip Screwdriver

121713439
302-3,0X150: RNCC: 3 | RNVC: 2
8000-3X150: RNCC: 3 | RNVC: 2
4010995006891: RNCC: 5 | RNVC: 2
131433: RNCC: 5 | RNVC: 2
8000-0-5X3X150: RNCC: 5 | RNVC: 2
006891: RNCC: 5 | RNVC: 2

30 Sep 1977

5120-12-146-2958
Rohr Montageklammer

121462958
25704-360300.07.0: RNCC: 2 | RNVC: 2
25704-360300.07.0: RNCC: 3 | RNVC: 2
25704-360300.07.0: RNCC: 5 | RNVC: 2
25704-360300-07-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-198-3264
Socket Head Screw Key

121983264
DIN905-19: RNCC: 2 | RNVC: 2

16 Jan 1984

5120-12-311-2601
Screw Thread Insert Tang Breakoff Tool

123112601
0 158 5160 000: RNCC: 3 | RNVC: 2

11 Aug 1987

5120-12-171-9956
Screwdriver Bit

121719956
45M2-5: RNCC: 3 | RNVC: 2
114048: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-149-5851
Socket Wrench

121495851
NO PRIMARY REF 12-149-5851: RNCC: 3 | RNVC: 2
105147: RNCC: 5 | RNVC: 9
1936M24X25: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-3307
Blacksmith's Top Swage

121263307
0001801-25: RNCC: 3 | RNVC: 2
5048-25: RNCC: 5 | RNVC: 9
18-25: RNCC: 5 | RNVC: 9
0B25DIN5104: RNCC: 5 | RNVC: 9
DIN5104-OB25: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-303-7850
Spanner Wrench

123037850
12790-110000.006: RNCC: 2 | RNVC: 2
009-030.105-006W2: RNCC: 3 | RNVC: 2
12790-110000.006: RNCC: 5 | RNVC: 2
12790-110000.006: RNCC: 5 | RNVC: 9

26 Apr 1985

5120-12-338-2510
Socket Wrench

123382510
239080: RNCC: 3 | RNVC: 9

9 Jun 1995

5120-12-350-2369
Auswechs Klemmteil

123502369
2300279-714000.000: RNCC: 2 | RNVC: 2
2300279-714000.000: RNCC: 3 | RNVC: 2
2300279-714000.000: RNCC: 5 | RNVC: 9

1 Mar 2000

5120-12-358-1546
Adjustable Wrench

123581546
71522108: RNCC: 3 | RNVC: 2
715 221 08: RNCC: 5 | RNVC: 2

19 Sep 2002

5120-12-313-2493
Aligning Punch

123132493
80996170076: RNCC: 3 | RNVC: 2
80.99617.0076: RNCC: 5 | RNVC: 2
80.99617.0760: RNCC: 5 | RNVC: 9

15 Mar 1988

5120-12-194-9519
Spanner Wrench

121949519
1X56136439: RNCC: 3 | RNVC: 2

21 Dec 1982

5120-12-121-6887

5120-12-348-4816
Inspection Mirror

123484816
8205893761/03: RNCC: 3 | RNVC: 2
820589376103: RNCC: 5 | RNVC: 2

29 Jun 1999

5120-12-175-3970
Montageplatte

121753970
VG95211-ML-121753970: RNCC: 2 | RNVC: 2
EV4-843: RNCC: 3 | RNVC: 2
EV4-843: RNCC: 5 | RNVC: 9

13 Sep 1978

5120-12-313-9049
Socket Wrench Socket

123139049
1402087: RNCC: 3 | RNVC: 2
22-310-2B-023: RNCC: 5 | RNVC: 2

18 May 1988

5120-12-133-4629
Box Wrench

121334629
NO PRIMARY REF 12-133-4629: RNCC: 3 | RNVC: 2
5185890403: RNCC: 5 | RNVC: 2
022M00700: RNCC: 5 | RNVC: 2
41032222: RNCC: 5 | RNVC: 9
19-22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-5069
Montagestutzen

121535069
V0M016S: RNCC: 3 | RNVC: 2
V0RM0NTAGESTUTZEN16L: RNCC: 5 | RNVC: 2
V0RM0NTAGESTUTZEN16S: RNCC: 5 | RNVC: 2
909129406: RNCC: 5 | RNVC: 2
101740: RNCC: 5 | RNVC: 2
V0M016S: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-154-1518

5120-12-172-1691

5120-12-375-2577
Spanner Wrench

123752577
1602022953: RNCC: 3 | RNVC: 2

8 May 2008

5120-12-340-9823
Mechanical Puller

123409823
6.226.0.690.010.6: RNCC: 3 | RNVC: 9
12159724: RNCC: 5 | RNVC: 2

11 Jul 1996

5120-12-381-7405
Mechan Adaptersatz

123817405
1936557: RNCC: 3 | RNVC: 2
1.81/K-12: RNCC: 5 | RNVC: 2
1936557: RNCC: 5 | RNVC: 2
1.81/K-12: RNCC: 5 | RNVC: 2
4036976121568: RNCC: 5 | RNVC: 2
4036976121568: RNCC: 5 | RNVC: 2

25 Mar 2010

5120-12-139-7692
Abziehvorrichtung

121397692
3125890933: RNCC: 3 | RNVC: 2
312589093300: RNCC: 5 | RNVC: 2

30 May 1969

Load More Results