What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 41 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 41 of 62

5120-12-304-2535
Seal Inserter

123042535
3B33-4-3: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-12-349-3930
Montierdorn

123493930
2300211-990606.000.0: RNCC: 2 | RNVC: 2
2300211-990606.000.0: RNCC: 3 | RNVC: 2

9 Nov 1999

5120-12-384-0123
Bearing And Bushing Remover

123840123
F30378577: RNCC: 3 | RNVC: 2

12 Jan 2011

5120-12-315-8721
Torque Wrench

123158721
655: RNCC: 3 | RNVC: 2
00655000083: RNCC: 5 | RNVC: 2

3 Dec 1988

5120-12-380-2581
Hand Roller

123802581
125.484: RNCC: 3 | RNVC: 2
4128006: RNCC: 5 | RNVC: 2

12 Oct 2009

5120-12-375-7820
Adjustable Wrench

123757820
6-773: RNCC: 3 | RNVC: 2

3 Jul 2008

5120-12-196-7382
Bearing And Bushing Inserter

121967382
1X56119918: RNCC: 3 | RNVC: 2
0535661: RNCC: 5 | RNVC: 2
535661: RNCC: 5 | RNVC: 9

9 Aug 1983

5120-12-393-7294
Mechanical Puller

123937294
10104323: RNCC: 3 | RNVC: 2

7 Oct 2013

5120-12-041-2675

5120-12-320-8175
Mechanical Puller Adapter

123208175
99346006: RNCC: 3 | RNVC: 2

20 Feb 1990

5120-12-338-4372
Sp Montierwerkzeug

123384372
352589003100: RNCC: 3 | RNVC: 2
352 589 00 31 00: RNCC: 5 | RNVC: 2

10 Jul 1995

5120-12-155-0186
Open End Wrench

121550186
NO PRIMARY REF 12-155-0186: RNCC: 3 | RNVC: 2
5M.8936.222.10: RNCC: 5 | RNVC: 2
5M8936-222-10: RNCC: 5 | RNVC: 2
105783: RNCC: 5 | RNVC: 9
179980: RNCC: 5 | RNVC: 9
1953C-M19X22: RNCC: 5 | RNVC: 9
1953M19X22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-141-6073
Mechanical Puller

121416073
NO PRIMARY REF 12-141-6073: RNCC: 3 | RNVC: 2
444-31-854-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-191-9409
Ausdrueckvorrichtun

121919409
66632701: RNCC: 3 | RNVC: 2

16 Mar 1982

5120-12-139-3108
Schluessel

121393108
8205891707: RNCC: 3 | RNVC: 2
023M03300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-361-9416
Socket Wrench Socket

123619416
SW46XAD57-5: RNCC: 3 | RNVC: 2

5 Dec 2003

5120-12-319-4530
Lager- Und Einsatz

123194530
99366656: RNCC: 3 | RNVC: 2

3 Oct 1989

5120-12-347-6170
Schluessel

123476170
655 589 00 61 00: RNCC: 3 | RNVC: 2
655589006100: RNCC: 5 | RNVC: 2

14 Jan 1999

5120-12-192-4909
Mechanical Puller

121924909
1X56136965: RNCC: 3 | RNVC: 2
1X 56 136 965: RNCC: 5 | RNVC: 2

28 Apr 1982

5120-12-126-5439
Dorn

121265439
3045891039: RNCC: 3 | RNVC: 2
3045891039: RNCC: 3 | RNVC: 9
304589103900: RNCC: 5 | RNVC: 2
304589103900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-134-2759
Schluessel

121342759
027M03900: RNCC: 3 | RNVC: 2
VM70376: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5273
Combination Box And Open End Wrench

121235273
600NA-1.3/8: RNCC: 3 | RNVC: 2
13A1 3-8: RNCC: 3 | RNVC: 2
40486060: RNCC: 5 | RNVC: 2
1506120018: RNCC: 5 | RNVC: 9
600A-1.3/8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-193-0150
Einbauwerkzeug

121930150
601 589 02 63 00: RNCC: 3 | RNVC: 2
601589026300: RNCC: 3 | RNVC: 2

14 Jun 1982

5120-12-362-6152
Socket Wrench

123626152
204.0112: RNCC: 3 | RNVC: 2
52.2167.022.51: RNCC: 5 | RNVC: 2

12 Mar 2004

5120-12-348-2024
Gas Torch

123482024
RK2020: RNCC: 3 | RNVC: 2
RK 2020: RNCC: 5 | RNVC: 2

5 May 1999

5120-12-127-4467
Mechanical Puller Attachment

121274467
22-4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-302-1251
Sheet Metalworking Stake

123021251
98.01-5: RNCC: 3 | RNVC: 2
0098010190: RNCC: 5 | RNVC: 2
55014-0-0: RNCC: 5 | RNVC: 2

1 Dec 1984

5120-12-139-3153
Mechanical Puller

121393153
8205891733: RNCC: 3 | RNVC: 2
002M02100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-153-5238
Socket Wrench

121535238
CH2282-18NM: RNCC: 3 | RNVC: 2
5615890209/00: RNCC: 5 | RNVC: 2
561589020900: RNCC: 5 | RNVC: 2
CH2282-18NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-1341
Crowfoot Wrench Head Socket

121291341
NO PRIMARY REF 12-129-1341: RNCC: 3 | RNVC: 2
108399: RNCC: 5 | RNVC: 9
5130Z1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-310-8773
Wuergezangenteil

123108773
S4-1298C: RNCC: 3 | RNVC: 2
1298: RNCC: 5 | RNVC: 2

3 Jul 1987

5120-12-312-2164
Werkst Druckstueck

123122164
VW511: RNCC: 3 | RNVC: 2

4 Dec 1987

5120-12-369-7584
Aligning Punch

123697584
904589026300: RNCC: 3 | RNVC: 2
7083673: RNCC: 5 | RNVC: 2

15 Aug 2006

5120-12-129-6237
Spanner Wrench

121296237
4027753: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-349-7296
Hand Hammer

123497296
10970-2: RNCC: 3 | RNVC: 2
70120003: RNCC: 5 | RNVC: 2

4 Jan 2000

5120-12-369-5087
Socket Wrench

123695087
905.7.35.101.2: RNCC: 3 | RNVC: 2

13 Jul 2006

5120-12-176-7331
Backenstueck

121767331
VG95211-ML-121767331: RNCC: 2 | RNVC: 2
105-10151W3.002: RNCC: 3 | RNVC: 2
105-10151W3-002: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-120-9495
Open End Wrench

121209495
DIN895-6X7: RNCC: 2 | RNVC: 2
895-6X7: RNCC: 3 | RNVC: 2
35-12-02: RNCC: 3 | RNVC: 2
6X7DIN895: RNCC: 5 | RNVC: 2
620-6X7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-124-1837
Hammer Handle

121241837
7588-350: RNCC: 3 | RNVC: 2
6935E350: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-180-1959
Socket Wrench Adapter

121801959
412: RNCC: 3 | RNVC: 2
11180000: RNCC: 5 | RNVC: 2

27 Aug 1979

5120-12-315-4530
Spanner Wrench

123154530
702732-9001.907: RNCC: 3 | RNVC: 2

26 Oct 1988

5120-12-168-1124
Spanner Wrench

121681124
12709-21200W3: RNCC: 3 | RNVC: 2
12709-21200W3: RNCC: 5 | RNVC: 9

18 Feb 1977

5120-12-333-4797
Seal Inserter

123334797
9108510046: RNCC: 3 | RNVC: 2

22 Dec 1993

5120-12-364-2911
Magnetic Retrieving Tool

123642911
77260027-TCS: RNCC: 3 | RNVC: 2

8 Sep 2004

5120-12-126-1316

5120-12-385-0874
Wrench Extension Handle

123850874
8205893061/02: RNCC: 3 | RNVC: 2

28 Apr 2011

5120-12-139-3120
Dreh- Und Haltevorr

121393120
8205891831: RNCC: 3 | RNVC: 2
014M03900: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-090-1458

5120-12-307-9653
Socket Wrench Socket

123079653
DIN7448-S17X10: RNCC: 2 | RNVC: 2
130217: RNCC: 3 | RNVC: 2
983717: RNCC: 3 | RNVC: 2
6609-587 17: RNCC: 3 | RNVC: 2
9291386210: RNCC: 5 | RNVC: 2
6609587: RNCC: 5 | RNVC: 9

14 Aug 1986

5120-12-175-8966
Spanner Wrench

121758966
750.00-01-00-01-089: RNCC: 3 | RNVC: 2
750-00-010001089: RNCC: 5 | RNVC: 2

25 Oct 1978

5120-12-358-1996
Screw Extractor

123581996
6904211: RNCC: 3 | RNVC: 2
690 421 1: RNCC: 5 | RNVC: 2

25 Sep 2002

5120-12-368-2115
Socket Head Screw Key

123682115
DIN65253-6: RNCC: 2 | RNVC: 2
42 X 6: RNCC: 3 | RNVC: 2
6350140: RNCC: 5 | RNVC: 2
4010886635018: RNCC: 5 | RNVC: 2

9 Jan 2006

5120-12-369-1038
Socket Wrench Socket

123691038
0986613239: RNCC: 3 | RNVC: 2

22 May 2006

5120-12-131-7158
Rollen Druckstueck

121317158
3045891833: RNCC: 3 | RNVC: 2
3045891833: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-388-4823
Socket Wrench Socket

123884823
1X56 137 273: RNCC: 3 | RNVC: 2

26 Mar 2012

5120-12-358-7172
Mechanical Puller Attachment

123587172
80996020123: RNCC: 3 | RNVC: 2
80.99602.0123: RNCC: 5 | RNVC: 9

7 Nov 2002

5120-12-370-7797
Socket Wrench

123707797
E44070-P6189-C: RNCC: 3 | RNVC: 2

19 Dec 2006

5120-12-361-1316
Montierdorn

123611316
152-1003: RNCC: 3 | RNVC: 2

26 Aug 2003

5120-12-333-5643
Spanner Wrench

123335643
66-92-015: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-140-2232

5120-12-136-7425

5120-12-126-3171
Hand Contact Burnisher

121263171
5402B: RNCC: 3 | RNVC: 2
108417: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-010-9510

5120-12-358-7331
Pliers

123587331
1216-170: RNCC: 3 | RNVC: 2

8 Nov 2002

5120-12-358-8683
Combination Box And Open End Wrench Set

123588683
96593412: RNCC: 3 | RNVC: 2

22 Nov 2002

5120-12-188-7005
Socket Wrench Handle Bar

121887005
100278-73000.02.0: RNCC: 2 | RNVC: 2
100278-73000.02.0: RNCC: 3 | RNVC: 2
100278-73000-02-0: RNCC: 5 | RNVC: 9
100278-73000.02.0: RNCC: 5 | RNVC: 9

27 Jul 1981

5120-12-322-3214
Box Wrench

123223214
03.339.04.03.0: RNCC: 3 | RNVC: 2
03-339-04-03-0: RNCC: 5 | RNVC: 9

10 Aug 1990

5120-12-195-2223
Socket Head Screw Key

121952223
DIN7439-4: RNCC: 2 | RNVC: 9
115304: RNCC: 3 | RNVC: 2
115504: RNCC: 3 | RNVC: 2
981340: RNCC: 3 | RNVC: 2
323-4: RNCC: 3 | RNVC: 2
154I4: RNCC: 3 | RNVC: 9
1997M-VDE4: RNCC: 5 | RNVC: 9
828VDE-4: RNCC: 5 | RNVC: 9
9587-4: RNCC: 5 | RNVC: 9
3930110010: RNCC: 5 | RNVC: 9

26 Jan 1983

5120-12-351-9567
Socket Head Screw Key

123519567
ISO2936-6: RNCC: 2 | RNVC: 2
201-006: RNCC: 3 | RNVC: 2
5200.102.080.040: RNCC: 5 | RNVC: 2
ISO2936-6: RNCC: 5 | RNVC: 2
(241)I9008IS02936-6: RNCC: 5 | RNVC: 2

20 Sep 2000

5120-12-196-9823
Screw Thread Insert Inserter

121969823
01500203000: RNCC: 3 | RNVC: 2

7 Sep 1983

5120-12-332-6207
Qu Montierwerkzeug

123326207
3250: RNCC: 3 | RNVC: 2

30 Aug 1993

5120-12-368-9337
Socket Wrench Socket

123689337
771-S55: RNCC: 3 | RNVC: 2
00.51.92.51: RNCC: 5 | RNVC: 2

8 May 2006

5120-12-140-3890

5120-12-383-6504
Electronic Puller

123836504
1217229: RNCC: 3 | RNVC: 2
4.69.674.0000: RNCC: 5 | RNVC: 2

18 Nov 2010

5120-12-388-6226
Socket Wrench Socket

123886226
880LG-19: RNCC: 3 | RNVC: 2
4000896040803: RNCC: 5 | RNVC: 2

4 Apr 2012

5120-12-339-0857
Socket Wrench

123390857
238 450-03120: RNCC: 3 | RNVC: 2

10 Oct 1995

5120-12-305-4993
Face Spanner Wrench Socket

123054993
309589010700: RNCC: 3 | RNVC: 2

14 Nov 1985

5120-12-364-1728
Aligning Punch

123641728
F30450554: RNCC: 3 | RNVC: 2

27 Aug 2004

5120-12-387-4292
Crimping Tool Die

123874292
D150: RNCC: 3 | RNVC: 2

14 Dec 2011

5120-12-135-7104
Piston Ring Compressor

121357104
11038934900: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-194-9817
Mechanical Puller Attachment

121949817
1X56136317: RNCC: 3 | RNVC: 2

23 Dec 1982

5120-12-126-2526

5120-12-181-9543
Abziehvorrichtung

121819543
01TC31002: RNCC: 3 | RNVC: 2

28 Dec 1979

5120-12-188-4983
Hand Hammer

121884983
C341-250: RNCC: 3 | RNVC: 2

13 Jul 1981

5120-12-121-5974

5120-12-363-0363
Mechanical Puller Attachment

123630363
01TC33094: RNCC: 3 | RNVC: 2
01TC33094: RNCC: 5 | RNVC: 2

28 Apr 2004

5120-12-141-3641
Dich Einfuehrbuchse

121413641
1115891761: RNCC: 3 | RNVC: 2
1115891761: RNCC: 3 | RNVC: 9
111589176100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-318-4021
Face Spanner Wrench Socket

123184021
2816159: RNCC: 3 | RNVC: 2

11 Jul 1989

5120-12-126-5479
Abziehvorrichtung

121265479
0645890033: RNCC: 3 | RNVC: 2
0645890033: RNCC: 3 | RNVC: 9
064589003300: RNCC: 5 | RNVC: 2
064589003300: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-370-6293
Float

123706293
840 500 00: RNCC: 3 | RNVC: 2
02.33.79.02: RNCC: 5 | RNVC: 2

4 Dec 2006

5120-12-303-7849
Spanner Wrench

123037849
009-030.150-011W1: RNCC: 3 | RNVC: 2
12790-124000.011: RNCC: 5 | RNVC: 2
009-039.150-011W1: RNCC: 5 | RNVC: 9

26 Apr 1985

5120-12-171-1943
Face Spanner Wrench Socket

121711943
80.99603-0078: RNCC: 3 | RNVC: 2
80996030078: RNCC: 3 | RNVC: 2

16 Sep 1977

5120-12-186-8791
Spanner Wrench

121868791
0045500: RNCC: 3 | RNVC: 2

16 Feb 1981

5120-12-186-7357
Seal Inserter

121867357
99374379: RNCC: 3 | RNVC: 2
416700: RNCC: 5 | RNVC: 9
416700: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-342-1652
Bearing And Bushing Inserter

123421652
1X56045812: RNCC: 3 | RNVC: 2

19 Dec 1996

5120-12-368-7475
Socket Wrench Screwdriver Attachment

123687475
3525-PZ 3: RNCC: 3 | RNVC: 2
00.47.47.91: RNCC: 5 | RNVC: 2

12 Apr 2006

5120-12-181-1574
Screwdriver Bit

121811574
1094-2: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-306-6501
Spanner Wrench

123066501
5600023-970200.003.0: RNCC: 2 | RNVC: 2
5600023-970200.003.0: RNCC: 3 | RNVC: 2
22008.0.01.001.00: RNCC: 5 | RNVC: 2
222008.0.01.001.00: RNCC: 5 | RNVC: 2

18 Mar 1986

5120-12-181-6006
Drill Drift

121816006
6 33 05 010 00 6: RNCC: 3 | RNVC: 2
63305009004: RNCC: 5 | RNVC: 2
63305010006: RNCC: 5 | RNVC: 2

10 Dec 1979

5120-12-130-7969
Ein- Und Ausziehvor

121307969
NO PRIMARY REF 12-130-7969: RNCC: 3 | RNVC: 2
2330: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-162-4603
Socket Wrench Screwdriver Attachment

121624603
54IC12: RNCC: 3 | RNVC: 2
54IC-12: RNCC: 5 | RNVC: 2
03070012: RNCC: 5 | RNVC: 2
54IC: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-5218
Schluesselsicherung

121535218
CH1774-4NM: RNCC: 3 | RNVC: 2
820589530700: RNCC: 5 | RNVC: 2
8205895307/00: RNCC: 5 | RNVC: 2
CH1774-4NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-9737
Spanner Wrench

121299737
T560: RNCC: 3 | RNVC: 2
T560: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-319-4523
Bearing And Bushing Inserter

123194523
99363296: RNCC: 3 | RNVC: 2

3 Oct 1989

5120-12-364-0836
Mechanical Puller

123640836
000589613400: RNCC: 3 | RNVC: 2

19 Aug 2004

5120-12-307-3761
Grommet Inserting Punch And Die

123073761
1500032: RNCC: 3 | RNVC: 2
3482: RNCC: 5 | RNVC: 9
3630043: RNCC: 5 | RNVC: 9

10 Jun 1986

5120-12-175-3969
Montageplatte

121753969
VG95211-ML-121753969: RNCC: 2 | RNVC: 2
EV4-842: RNCC: 3 | RNVC: 2
EV4-842: RNCC: 5 | RNVC: 9

13 Sep 1978

5120-12-192-7106
Spreitzstueck

121927106
01TC33503: RNCC: 3 | RNVC: 2

17 May 1982

5120-12-024-1979

5120-12-333-8660
Montierhuelse

123338660
321589041400: RNCC: 3 | RNVC: 2

18 Feb 1994

5120-12-373-5559
Aligning Punch

123735559
4SEI51-N1: RNCC: 3 | RNVC: 2

14 Nov 2007

5120-12-194-0811
Torque Wrench Adapter

121940811
TL5120-0086-230: RNCC: 2 | RNVC: 2
7852-7 15: RNCC: 5 | RNVC: 9
20/DCA-15: RNCC: 5 | RNVC: 9
6264110003: RNCC: 5 | RNVC: 9
6450D-15: RNCC: 5 | RNVC: 9
731/40 15: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-153-5046
Mechanical Puller

121535046
510195-170-00: RNCC: 2 | RNVC: 2
169104402: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-1963
Craftsman's Tweezers

121261963
5010-200: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-368-9903
Socket Head Screw Key

123689903
363-T5: RNCC: 3 | RNVC: 2
00.42.98.30: RNCC: 5 | RNVC: 2
037642: RNCC: 5 | RNVC: 2

10 May 2006

5120-12-311-1827
Bearing And Bushing Inserter

123111827
395589021500: RNCC: 3 | RNVC: 2

4 Aug 1987

5120-12-343-3837
Bearing And Bushing Inserter

123433837
417589014300: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-347-1925
Socket Head Screw Key Set

123471925
440/10AF: RNCC: 3 | RNVC: 2
4400116: RNCC: 5 | RNVC: 2

10 Nov 1998

5120-12-161-0090
Seal Inserter

121610090
510306-0000.04: RNCC: 2 | RNVC: 2
07295: RNCC: 3 | RNVC: 2
510306-0000-04: RNCC: 5 | RNVC: 9
510306-0000-04: RNCC: 5 | RNVC: 9
07295: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-363-9701
Bearing And Bushing Inserter

123639701
T671P5002233: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-140-1721
Dorn

121401721
698130: RNCC: 3 | RNVC: 9
510069RH698130: RNCC: 5 | RNVC: 2
698130: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-132-1183
Naehrosz

121321183
781: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-134-2761

5120-12-139-5791

5120-12-044-4919

5120-12-388-5365
Combination Box And Open End Wrench

123885365
C194426: RNCC: 3 | RNVC: 2

29 Mar 2012

5120-12-179-9458
Spanner Wrench

121799458
SP020: RNCC: 3 | RNVC: 2

9 Aug 1979

5120-12-146-5125
Schluesseleinsatz

121465125
1X56092512: RNCC: 3 | RNVC: 2
V92512: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-182-1510
Socket Wrench

121821510
51-031K4: RNCC: 3 | RNVC: 2

16 Jan 1980

5120-12-312-2171
Aligning Punch

123122171
VW385/31: RNCC: 3 | RNVC: 2

4 Dec 1987

5120-12-391-3266
Plug Electrical Connector Extractor

123913266
1577: RNCC: 3 | RNVC: 2
74620027: RNCC: 5 | RNVC: 2

6 Mar 2013

5120-12-388-6537
Seal Inserter

123886537
80996060568: RNCC: 3 | RNVC: 2
80.99606-0568: RNCC: 5 | RNVC: 2

10 Apr 2012

5120-12-163-6609
Montagevorrichtung

121636609
26-21C1096P010: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-305-2235
Hand Blind Riveter

123052235
TL5120-0060: RNCC: 2 | RNVC: 2
329360: RNCC: 5 | RNVC: 2
GT100: RNCC: 5 | RNVC: 2
5120-43310: RNCC: 6 | RNVC: 9

9 Oct 1985

5120-12-700-7671
Torque Wrench

127007671
VG95211-ML-127007671: RNCC: 2 | RNVC: 2
7810.0053: RNCC: 3 | RNVC: 2
BPSNR 29062: RNCC: 5 | RNVC: 2

28 Jan 1993

5120-12-190-7849
Ring

121907849
80.99616.0060: RNCC: 3 | RNVC: 2
80996160060: RNCC: 3 | RNVC: 2

15 Dec 1981

5120-12-378-8376
Torque Wrench Adapter

123788376
6423D: RNCC: 3 | RNVC: 2
4000896057559: RNCC: 5 | RNVC: 2

18 May 2009

5120-12-023-2705

5120-12-024-0449

5120-12-311-1461
Craftsman's Tweezers

123111461
71801: RNCC: 3 | RNVC: 2
250A-10-1008: RNCC: 5 | RNVC: 2
250A-10-1008: RNCC: 5 | RNVC: 9
71 954: RNCC: 5 | RNVC: 9

31 Jul 1987

5120-12-309-5577
Socket Wrench Handle Bar

123095577
604-45.12.181-19E: RNCC: 3 | RNVC: 2

4 Feb 1987

5120-12-362-5499
Montierdorn

123625499
611 589 00 14 00: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-12-311-6477
Socket Wrench

123116477
4510103: RNCC: 3 | RNVC: 2

30 Sep 1987

5120-12-123-5070
Open End Wrench

121235070
3037: RNCC: 3 | RNVC: 2
3037: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-303-0450
Handbetaetig Klaue

123030450
ZBT EZK 001.002: RNCC: 3 | RNVC: 2

22 Feb 1985

5120-12-313-2950
Clutch Tip Screwdriver

123132950
510030: RNCC: 2 | RNVC: 9

18 Mar 1988

5120-12-135-8959

5120-12-135-2792
Socket Wrench

121352792
NO PRIMARY REF 12-135-2792: RNCC: 3 | RNVC: 2
25-320: RNCC: 5 | RNVC: 9
2530: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-1840
Slugging Type Box Wrench Socket

121471840
001589220902: RNCC: 3 | RNVC: 2
61-65: RNCC: 3 | RNVC: 2
64720-SW65: RNCC: 5 | RNVC: 2
647200-65: RNCC: 5 | RNVC: 2
08061834100: RNCC: 5 | RNVC: 2
06030065: RNCC: 5 | RNVC: 2
001 589 22 09 02: RNCC: 5 | RNVC: 2
001589220902: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-361-1414
Open End Wrench

123611414
2125-129695A00C: RNCC: 2 | RNVC: 2
2125-129695A00C: RNCC: 3 | RNVC: 2

27 Aug 2003

5120-12-358-2713
Retaining Ring Installation Tool

123582713
5X56000058: RNCC: 3 | RNVC: 2
131506: RNCC: 5 | RNVC: 2

7 Oct 2002

5120-12-130-4457
Machinist's Vise

121304457
818002: RNCC: 3 | RNVC: 2
3220-125: RNCC: 5 | RNVC: 9
D125DIN5115: RNCC: 5 | RNVC: 9
DIN5115-D125: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-2806
Hand Terminal Crimping Tool

123712806
9700215D: RNCC: 3 | RNVC: 2
00.16.67.18: RNCC: 5 | RNVC: 2
4003773006527: RNCC: 5 | RNVC: 2

8 Mar 2007

5120-12-357-2282
Duese Reiniger

123572282
0986611151: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-369-1832
Slip Joint Pliers

123691832
207A-ISO8976-250: RNCC: 2 | RNVC: 2
4420C: RNCC: 3 | RNVC: 2
45731: RNCC: 5 | RNVC: 2

31 May 2006

5120-12-092-3879

5120-12-094-1297

5120-12-326-0181
Mechanical Puller Attachment

123260181
201589053400: RNCC: 3 | RNVC: 2
63-432: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-314-9255
Machinist's Vise

123149255
874100-120: RNCC: 3 | RNVC: 2
87410115: RNCC: 5 | RNVC: 2

27 Aug 1988

5120-12-153-5067
Montagestutzen

121535067
V0M08L: RNCC: 3 | RNVC: 2
909129402: RNCC: 5 | RNVC: 2
101735: RNCC: 5 | RNVC: 2
V0M08L: RNCC: 5 | RNVC: 2
V0RM0NTAGESTUTZEN8L: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-364-3372
Socket Wrench Socket

123643372
02010010-TCS: RNCC: 3 | RNVC: 2

11 Sep 2004

5120-12-308-5944
Face Spanner Wrench Socket

123085944
537152-9110.000: RNCC: 3 | RNVC: 2
537152-9110.000: RNCC: 5 | RNVC: 9

28 Oct 1986

5120-12-381-9039
Clamp Base Bench Vise

123819039
4000012-986010.000: RNCC: 3 | RNVC: 2

15 Apr 2010

5120-12-159-5785
Socket Wrench Crowfoot Attachment

121595785
000589011300: RNCC: 3 | RNVC: 2
0005890113: RNCC: 5 | RNVC: 2
7005214: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-387-1904
Open End Wrench

123871904
009.088: RNCC: 3 | RNVC: 2

14 Nov 2011

5120-12-392-6233
Socket Wrench

123926233
SZ2549.000: RNCC: 3 | RNVC: 2
4028177027572: RNCC: 5 | RNVC: 2

24 Jun 2013

5120-12-367-9977
Schluessel

123679977
ZG4035G110: RNCC: 3 | RNVC: 2
ZG4035G110: RNCC: 5 | RNVC: 9

16 Nov 2005

5120-12-368-2535
Inspection Mirror

123682535
77402040-TCS: RNCC: 3 | RNVC: 2

17 Jan 2006

5120-12-368-8133
Socket Wrench Screwdriver Attachment

123688133
3200-IS2,5X14: RNCC: 3 | RNVC: 2
00.50.11.64: RNCC: 5 | RNVC: 2

24 Apr 2006

5120-12-143-9063
Jack Elevating Block

121439063
730069-9210-00: RNCC: 3 | RNVC: 2
730069-9210-00: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5368
Socket Wrench

121235368
DIN896-A12X14: RNCC: 2 | RNVC: 2
A12X14DIN896: RNCC: 5 | RNVC: 2
A12X14DIN896GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-130-8468
Loch Und N Stempel

121308468
652-2-2MMD: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-179-9678
Montagewerkzeug

121799678
142990: RNCC: 3 | RNVC: 2
80.99617-0056: RNCC: 5 | RNVC: 2
80996170056: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-180-0986
Ausziehvorrichtung

121800986
VG95211-ML-121800986: RNCC: 2 | RNVC: 2
P-895005-407: RNCC: 3 | RNVC: 2
P895005-407: RNCC: 5 | RNVC: 2

20 Aug 1979

5120-12-307-8856
Spanner Wrench

123078856
163157: RNCC: 3 | RNVC: 2
264-1226: RNCC: 5 | RNVC: 2

6 Aug 1986

5120-12-154-2541
Socket Wrench

121542541
2TS47G11825: RNCC: 3 | RNVC: 2
2TS47G11825: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-333-5687
Spanner Wrench

123335687
1459801: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-318-0530
Bearing And Bushing Remover

123180530
1X56 136 952: RNCC: 3 | RNVC: 2
1X56136952: RNCC: 5 | RNVC: 9

7 Jun 1989

5120-12-368-6631
Screw Extractor

123686631
350-64: RNCC: 3 | RNVC: 2
01.42.49.87: RNCC: 5 | RNVC: 2

4 Apr 2006

5120-12-347-1878
Montierdorn

123471878
0850 6642: RNCC: 3 | RNVC: 2

10 Nov 1998

5120-12-010-5221

5120-12-363-8851
Bearing And Bushing Inserter

123638851
T670P5001216: RNCC: 3 | RNVC: 2

3 Aug 2004

5120-12-390-2204
Socket Wrench Socket

123902204
F30451383: RNCC: 3 | RNVC: 2

18 Oct 2012

5120-12-167-1150
Flat Tip Screwdriver

121671150
14021-12002W4: RNCC: 3 | RNVC: 2

23 Nov 1976

5120-12-370-6708
Torque Wrench

123706708
730-65: RNCC: 3 | RNVC: 2
4018754155040: RNCC: 5 | RNVC: 2
50180065: RNCC: 5 | RNVC: 2

6 Dec 2006

5120-12-149-9652

5120-12-389-2147
Pike Pole

123892147
LOGABW-IB3-001-512000700: RNCC: 3 | RNVC: 2
5120-00700: RNCC: 6 | RNVC: 9

6 Jun 2012

5120-12-191-3358
Plumber's Force Cup

121913358
315: RNCC: 3 | RNVC: 2

26 Jan 1982

5120-12-090-5470

5120-12-317-4328
Flat Tip Screwdriver

123174328
07480: RNCC: 3 | RNVC: 9

6 Apr 1989

5120-12-173-5109
Spanner Wrench

121735109
532008U16W2: RNCC: 3 | RNVC: 2
532008U16W2: RNCC: 5 | RNVC: 2
532008U16W2: RNCC: 5 | RNVC: 9
532008U16W2: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-12-124-7012
Schluessel

121247012
0812FS-60030: RNCC: 3 | RNVC: 2
FS60030: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1849
Tool Handle Wedge

121261849
KRALLE6: RNCC: 3 | RNVC: 2
KRALLE6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-328-4254
Socket Wrench Socket

123284254
1040: RNCC: 3 | RNVC: 2
03140208: RNCC: 5 | RNVC: 2

16 May 1992

5120-12-198-4265
Open End Wrench

121984265
DS3114-19: RNCC: 3 | RNVC: 2
667242: RNCC: 5 | RNVC: 2

26 Jan 1984

5120-12-337-0235
Torque Wrench Adapter

123370235
NO PRIMARY REF 12-337-0235: RNCC: 3 | RNVC: 2
8754-02: RNCC: 5 | RNVC: 9

11 Jan 1995

5120-12-320-8435
Driftpin

123208435
2654-993300.04: RNCC: 2 | RNVC: 2
2654-993300.04: RNCC: 3 | RNVC: 2
679-00000000.04: RNCC: 5 | RNVC: 9

22 Feb 1990

5120-12-123-5010
Open End Wrench

121235010
DIN895-46X50: RNCC: 2 | RNVC: 2
895-46X50: RNCC: 3 | RNVC: 2
46X50DIN895: RNCC: 5 | RNVC: 2
860N0226: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-360-6145
Socket Wrench Socket

123606145
F30378320: RNCC: 3 | RNVC: 2

17 Jun 2003

5120-12-335-1038
Engine Valve Seat Insert Knockout Tool

123351038
F30272509: RNCC: 3 | RNVC: 2

25 Jul 1994

5120-12-365-0506
Mechanical Puller

123650506
U22918: RNCC: 3 | RNVC: 2

24 Nov 2004

5120-12-130-4862
Wood Caulking Iron

121304862
TL5180-0115-48: RNCC: 2 | RNVC: 2
5180-115-48: RNCC: 5 | RNVC: 9
5180-0115-48: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-343-0201
Inserted Hammer Face

123430201
E267-45: RNCC: 3 | RNVC: 2
566101: RNCC: 5 | RNVC: 2

23 Apr 1997

5120-12-325-5264
Hand Hydraulic Jack

123255264
ADX2-370: RNCC: 3 | RNVC: 9

13 Jun 1991

5120-12-129-1388
Crowfoot Socket Wrench Head

121291388
NO PRIMARY REF 12-129-1388: RNCC: 3 | RNVC: 2
108386: RNCC: 5 | RNVC: 9
5125: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-6105
Seal Inserter

123886105
405589001500: RNCC: 3 | RNVC: 2

4 Apr 2012

5120-12-194-0826
Torque Wrench Adapter

121940826
TL5120-0086-420: RNCC: 2 | RNVC: 2
21/DC-7: RNCC: 5 | RNVC: 9
6263110021: RNCC: 5 | RNVC: 9
7452-8 7: RNCC: 5 | RNVC: 9
6630C-7: RNCC: 5 | RNVC: 9
732/10 7: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-153-7186
Box Wrench

121537186
CH2522-2-2FE: RNCC: 3 | RNVC: 2
5615890708/00: RNCC: 5 | RNVC: 2
561589070800: RNCC: 5 | RNVC: 2
CH2522-2-2FE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-4845
Open End Wrench

121234845
DIN133-90: RNCC: 2 | RNVC: 2
2300-90: RNCC: 3 | RNVC: 2
133-90: RNCC: 3 | RNVC: 2
452-90: RNCC: 3 | RNVC: 2
175-90: RNCC: 3 | RNVC: 2
90DIN133: RNCC: 5 | RNVC: 2
01750016: RNCC: 5 | RNVC: 2
571A301-90: RNCC: 5 | RNVC: 9
1102110015: RNCC: 5 | RNVC: 9
50620: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-9347
Solid Center Punch

123309347
3643-150: RNCC: 3 | RNVC: 2
107468: RNCC: 5 | RNVC: 2

1 Mar 1993

5120-12-172-0097
Open End Wrench

121720097
1931M19: RNCC: 3 | RNVC: 2
C 5702 431 EC: RNCC: 5 | RNVC: 2
104934: RNCC: 5 | RNVC: 2
1931M19: RNCC: 5 | RNVC: 2
C 5702 431 EC: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-148-7923
Abdrueckscheibe

121487923
14011-3540-01: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-190-7551
Spezial- Schluessel

121907551
4900144-16000: RNCC: 2 | RNVC: 2
332104-8210.904: RNCC: 3 | RNVC: 2
332104-8210.904: RNCC: 5 | RNVC: 9
332104-8210-904: RNCC: 5 | RNVC: 9

14 Dec 1981

5120-12-323-1187
Socket Wrench Set

123231187
NO PRIMARY REF 12-323-1187: RNCC: 3 | RNVC: 2
110734: RNCC: 5 | RNVC: 9
9540Z: RNCC: 5 | RNVC: 9

24 Oct 1990

5120-12-363-4454
Socket Wrench Socket

123634454
402-10: RNCC: 3 | RNVC: 2
01140010: RNCC: 5 | RNVC: 2

16 Jun 2004

5120-12-358-2738
Torque Wrench Adapter

123582738
8547006: RNCC: 3 | RNVC: 2

7 Oct 2002

5120-12-345-4964
Stud Remover

123454964
5196014: RNCC: 3 | RNVC: 2

24 Mar 1998

5120-12-172-0916

5120-12-170-8573
Anzugschraube

121708573
252969: RNCC: 3 | RNVC: 2
252969: RNCC: 5 | RNVC: 2
109380: RNCC: 5 | RNVC: 9
252969: RNCC: 5 | RNVC: 9
258951252969: RNCC: 5 | RNVC: 9
109380: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-313-6536
Elektron Auszieher

123136536
5341601: RNCC: 3 | RNVC: 2

22 Apr 1988

5120-12-127-4441
Pliers

121274441
573A410B: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-151-8438

5120-12-374-3962
Retaining Ring Pliers

123743962
65434002-TCS: RNCC: 3 | RNVC: 2

13 Feb 2008

5120-12-316-2246
Face Spanner Wrench Socket

123162246
720.30-10-00-00-000: RNCC: 3 | RNVC: 2
162468: RNCC: 5 | RNVC: 2

2 Jan 1989

5120-12-349-0138
Chain Type Ratchet Lever Puller

123490138
245/9713-09-00-00: RNCC: 3 | RNVC: 2

14 Sep 1999

5120-12-369-6656
Socket Wrench Socket Set

123696656
54TXB/10: RNCC: 3 | RNVC: 2
96031008: RNCC: 5 | RNVC: 2

7 Aug 2006

5120-12-316-7536
Torque Wrench Adapter

123167536
319589000700: RNCC: 3 | RNVC: 2

8 Feb 1989

5120-12-373-4292
Mechanical Puller

123734292
1X53176709: RNCC: 3 | RNVC: 2

31 Oct 2007

5120-12-157-0271
Socket Head Screw Key

121570271
NO PRIMARY REF 12-157-0271: RNCC: 3 | RNVC: 2
954-3-32: RNCC: 5 | RNVC: 9
44902: RNCC: 5 | RNVC: 9
1997ZB3-32: RNCC: 5 | RNVC: 9
106004: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-301-6152
Verstel Spannbacke

123016152
NO PRIMARY REF 12-301-6152: RNCC: 3 | RNVC: 2
219665: RNCC: 5 | RNVC: 9
88B10: RNCC: 5 | RNVC: 9
88B10: RNCC: 5 | RNVC: 9

26 Oct 1984

5120-12-150-5430
Drain Plug Wrench

121505430
169101801: RNCC: 3 | RNVC: 2
7101-86-11-10: RNCC: 5 | RNVC: 9
7101-86-11.10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1770
Drive Pin Punch

121261770
NO PRIMARY REF 12-126-1770: RNCC: 3 | RNVC: 2
253-13MM: RNCC: 5 | RNVC: 9
1891-13MM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-6594
Dorn

121776594
2300002-269050.000: RNCC: 2 | RNVC: 2
V4930101700: RNCC: 3 | RNVC: 2
2300002-269050.000: RNCC: 3 | RNVC: 2
2300002-269050: RNCC: 5 | RNVC: 9

12 Feb 1979

5120-12-383-6717
Mechanical Puller Attachment

123836717
1X56.137.245: RNCC: 3 | RNVC: 2

23 Nov 2010

5120-12-330-0053
Mechanical Puller Attachment

123300053
0852 0366.004: RNCC: 3 | RNVC: 2
8520366.004: RNCC: 5 | RNVC: 2

21 Oct 1992

5120-12-363-2360
Bearing And Bushing Inserter

123632360
F30377254: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-310-8764
Wuergezangenteil

123108764
S3-1233: RNCC: 3 | RNVC: 2
1233: RNCC: 5 | RNVC: 2

3 Jul 1987

5120-12-310-2741
Torque Wrench

123102741
6291-1CT+: RNCC: 3 | RNVC: 2
6260420002: RNCC: 5 | RNVC: 9
6291CT: RNCC: 5 | RNVC: 9
6291CT+: RNCC: 5 | RNVC: 9

4 May 1987

5120-12-199-0781
Terminal Crimping Tool Contact Positioner

121990781
VG95236T12AB002: RNCC: 2 | RNVC: 2
8526-05: RNCC: 3 | RNVC: 2
8526-05: RNCC: 5 | RNVC: 2

23 Mar 1984

5120-12-176-7313
Buegel

121767313
VG95211-ML-121767313: RNCC: 2 | RNVC: 2
105-21832W1.01: RNCC: 3 | RNVC: 2
105-21832W1-01: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-176-4840
Face Spanner Wrench Socket

121764840
80996030121: RNCC: 3 | RNVC: 2
80.99603.0121: RNCC: 5 | RNVC: 2
80996030049: RNCC: 5 | RNVC: 2
6689: RNCC: 5 | RNVC: 2
E7301-00-01/03: RNCC: 5 | RNVC: 2

30 Nov 1978

5120-12-140-2285

5120-12-381-2984
Swivel Knob Jeweler's Screwdriver Set

123812984
248 961 56: RNCC: 3 | RNVC: 2
4007157318466: RNCC: 5 | RNVC: 2

29 Jan 2010

5120-12-379-3794
Hand Terminal Crimping Tool

123793794
97 53 09: RNCC: 3 | RNVC: 2
4003773044550: RNCC: 5 | RNVC: 2

17 Jul 2009

5120-12-171-5369
Okular Zange

121715369
1238-1400W17: RNCC: 3 | RNVC: 2
1238-1400W17: RNCC: 5 | RNVC: 2
1238-1400W17: RNCC: 5 | RNVC: 9

21 Oct 1977

5120-12-358-2649
Screwdriver Bit

123582649
614784105: RNCC: 3 | RNVC: 2
614 784 105: RNCC: 5 | RNVC: 2

2 Oct 2002

5120-12-199-9260
El Montierwerkzeug

121999260
300457: RNCC: 3 | RNVC: 2

19 Jun 1984

5120-12-139-3109
Spanner Wrench

121393109
8205890709: RNCC: 3 | RNVC: 2
023M03800: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-328-3759
Bearing And Bushing Inserter

123283759
000589494300: RNCC: 3 | RNVC: 2
000 589 49 43 00: RNCC: 5 | RNVC: 2

12 May 1992

5120-12-185-5517
Hole Sheet Metal Holder

121855517
2071Z-32: RNCC: 3 | RNVC: 2
227-1071Z-32: RNCC: 5 | RNVC: 2
2071Z32: RNCC: 5 | RNVC: 2

14 Oct 1980

5120-12-702-7554
Lamp Extractor

127027554
40-13706613332: RNCC: 2 | RNVC: 2

13 Dec 1995

5120-12-126-1918
Magnetic Retrieving Tool

121261918
2535T: RNCC: 3 | RNVC: 2
2535T: RNCC: 5 | RNVC: 2
1064525: RNCC: 5 | RNVC: 2
106452: RNCC: 5 | RNVC: 9
5120-45202: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-383-8563
Ratchet Wrench

123838563
6257600: RNCC: 3 | RNVC: 2
31KR 45-90: RNCC: 5 | RNVC: 2
31KR 45-90: RNCC: 5 | RNVC: 2
4010886625767: RNCC: 5 | RNVC: 2
4010886625767: RNCC: 5 | RNVC: 2
6257600: RNCC: 5 | RNVC: 2

14 Dec 2010

5120-12-197-6233
Hole Sheet Metal Holder

121976233
2071Z-20: RNCC: 3 | RNVC: 2
2071Z20: RNCC: 5 | RNVC: 2
224-2071Z-20: RNCC: 5 | RNVC: 2

8 Nov 1983

5120-12-158-9750
Electronic Equipment Alignment Tool

121589750
700-20S: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-327-7414
Box Wrench Set

123277414
NO PRIMARY REF 12-327-7414: RNCC: 3 | RNVC: 2
160-768: RNCC: 5 | RNVC: 9
160-7682Z/5T: RNCC: 5 | RNVC: 9
160768: RNCC: 5 | RNVC: 9

26 Feb 1992

5120-12-331-4484
Okular Zange

123314484
544-898: RNCC: 3 | RNVC: 2
5441300: RNCC: 5 | RNVC: 2

5 May 1993

5120-12-168-5621
Socket Wrench Crowfoot Attachment

121685621
1950M26: RNCC: 3 | RNVC: 2
440-26: RNCC: 3 | RNVC: 2
131499: RNCC: 5 | RNVC: 2
02190026: RNCC: 5 | RNVC: 2
1314996: RNCC: 5 | RNVC: 2
1950M-26: RNCC: 5 | RNVC: 2
85-800-5961: RNCC: 6 | RNVC: 9

22 Mar 1977

5120-12-123-5791
Socket Wrench Socket

121235791
DIN3124-S80X25: RNCC: 2 | RNVC: 2
5011/80: RNCC: 3 | RNVC: 2
60-80: RNCC: 3 | RNVC: 2
TVA5120-2-263-024: RNCC: 5 | RNVC: 1
S80X25DIN3124: RNCC: 5 | RNVC: 2
06010080: RNCC: 5 | RNVC: 2
TVA5120-2-263-024-1.1.91: RNCC: 5 | RNVC: 2
S80X25DIN3124GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-173-1068
Haltevorrichtung

121731068
VG95211-ML-121731068: RNCC: 2 | RNVC: 2
1X56 136 849: RNCC: 3 | RNVC: 2
1X56136849: RNCC: 5 | RNVC: 9

20 Mar 1978

5120-12-315-4870
Flat Tip Screwdriver

123154870
NO PRIMARY REF 12-315-4870: RNCC: 3 | RNVC: 2
830-2: RNCC: 5 | RNVC: 2
3930140021: RNCC: 5 | RNVC: 2

29 Oct 1988

5120-12-120-0724
Hand Nail Puller

121200724
DIN6480-450: RNCC: 2 | RNVC: 2
450DIN6480: RNCC: 5 | RNVC: 2
1082-300: RNCC: 5 | RNVC: 9
KISTEN0EFFNERDIN6480: RNCC: 5 | RNVC: 9
5120-17272: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-384-9708
Hand Hammer

123849708
I002302: RNCC: 3 | RNVC: 2

14 Apr 2011

5120-12-172-3527
Spanner

121723527
227U: RNCC: 3 | RNVC: 2

11 Jan 1978

5120-12-368-8083
Combination Box And Open End Wrench

123688083
40100606-TCS: RNCC: 3 | RNVC: 2

24 Apr 2006

5120-12-373-4529
Socket Head Screw Key

123734529
0613 140 25: RNCC: 3 | RNVC: 2
54976: RNCC: 3 | RNVC: 2
4001002549760: RNCC: 5 | RNVC: 2

6 Nov 2007

5120-12-183-0718
Elektron Auszieher

121830718
AWN187-N1: RNCC: 3 | RNVC: 2
AWN187-N1: RNCC: 3 | RNVC: 2
AWN187N1: RNCC: 3 | RNVC: 2
AWN187N1: RNCC: 3 | RNVC: 2
AWN187-N1: RNCC: 5 | RNVC: 9
AWN187N1: RNCC: 5 | RNVC: 9

18 Mar 1980

5120-12-387-1247
Electrical Contact Remover

123871247
1230-34601: RNCC: 3 | RNVC: 2
80996066144: RNCC: 5 | RNVC: 2
80.99606-6144: RNCC: 5 | RNVC: 2

8 Nov 2011

5120-12-327-4570
Torque Wrench

123274570
D5513#8702-00/ISOLIERT 1000V: RNCC: 3 | RNVC: 2
284830: RNCC: 3 | RNVC: 2
284830: RNCC: 3 | RNVC: 9

23 Jan 1992

5120-12-345-3352
Spanner Wrench

123453352
7418-798-151: RNCC: 3 | RNVC: 2

3 Mar 1998

5120-12-312-3275
Montierwerk Huelse

123123275
40-21: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-12-382-7719
Tool Handle Wedge

123827719
NO PRIMARY REF 12-382-7719: RNCC: 3 | RNVC: 2
68000045: RNCC: 5 | RNVC: 2

6 Aug 2010

5120-12-351-3431
Elektron Auszieher

123513431
200087: RNCC: 3 | RNVC: 2
200087-0000-000: RNCC: 5 | RNVC: 2

17 Jul 2000

5120-12-183-1611
Socket Wrench Socket

121831611
1000089-92000.12: RNCC: 3 | RNVC: 2
1000089-92000.12: RNCC: 5 | RNVC: 2
1000089-92000-12: RNCC: 5 | RNVC: 2
1000089-92000-12: RNCC: 5 | RNVC: 9

25 Mar 1980

5120-12-393-6151
Spanner Wrench

123936151
10112687: RNCC: 3 | RNVC: 2

26 Sep 2013

5120-12-316-2048
Tool

123162048
DCE.91.071.BVC: RNCC: 3 | RNVC: 2

30 Dec 1988

5120-12-320-6953
Face Spanner Wrench Socket

123206953
04677W1: RNCC: 3 | RNVC: 2

8 Feb 1990

5120-12-133-6188
Einschleifvorrichtu

121336188
980-181: RNCC: 3 | RNVC: 2
BM23912: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-354-8977
Torque Handle

123548977
4100-01: RNCC: 3 | RNVC: 2
4100-01: RNCC: 3 | RNVC: 2

3 Sep 2001

5120-12-163-6592
Rohr Auszieher

121636592
26-21C1014G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-170-2617
Spanner Wrench

121702617
12708-122W2: RNCC: 2 | RNVC: 2
338912-9008.000: RNCC: 3 | RNVC: 2
12708-122W2: RNCC: 5 | RNVC: 2
12708-122W2: RNCC: 5 | RNVC: 2
338912-9008.000: RNCC: 5 | RNVC: 9

7 Jul 1977

5120-12-336-7711
Screwdriver Bit

123367711
600-1,2X6,5: RNCC: 3 | RNVC: 2

21 Dec 1994

5120-12-194-0854
Torque Wrench Adapter

121940854
TL5120-0086-1020: RNCC: 2 | RNVC: 2
7852-5: RNCC: 5 | RNVC: 9
23/DCA: RNCC: 5 | RNVC: 9
6264420001: RNCC: 5 | RNVC: 9
6420D: RNCC: 5 | RNVC: 9
736/40: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-180-8412
Open End Wrench

121808412
NO PRIMARY REF 12-180-8412: RNCC: 3 | RNVC: 2
571A606-10X12: RNCC: 5 | RNVC: 9
12-10X12: RNCC: 5 | RNVC: 9

5 Oct 1979

5120-12-340-4239
Socket Wrench Socket

123404239
D32-33: RNCC: 3 | RNVC: 2

12 Apr 1996

5120-12-359-4298
Torque Wrench

123594298
AS576-1833A-01: RNCC: 3 | RNVC: 2

5 Feb 2003

5120-12-140-3769
Spanner Wrench

121403769
5191153-250: RNCC: 2 | RNVC: 2
11964-3A: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-388-5467
Seal Inserter

123885467
765589041400: RNCC: 3 | RNVC: 2

29 Mar 2012

5120-12-335-6876
Swivel Knob Jeweler's Screwdriver

123356876
260-1,8X40: RNCC: 3 | RNVC: 2

13 Sep 1994

5120-12-130-9585
Box Wrench

121309585
NO PRIMARY REF 12-130-9585: RNCC: 3 | RNVC: 2
1-24: RNCC: 5 | RNVC: 9
1-125: RNCC: 5 | RNVC: 9
19-24: RNCC: 5 | RNVC: 9
41032424: RNCC: 5 | RNVC: 9
1-24: RNCC: 5 | RNVC: 9
234842: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5485
Socket Wrench

121235485
DIN896-B41X46: RNCC: 2 | RNVC: 2
26R41X46: RNCC: 3 | RNVC: 2
1080-41X46: RNCC: 3 | RNVC: 2
3800021: RNCC: 3 | RNVC: 2
B41X46DIN896: RNCC: 5 | RNVC: 2
DIN896B41X46: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-196-6862
Montierhuelse

121966862
4900059-751730.000.0: RNCC: 2 | RNVC: 2
4900059-751730.000.0: RNCC: 3 | RNVC: 2
4900059-751730-000-0: RNCC: 5 | RNVC: 2
4900059-751730.000.0: RNCC: 5 | RNVC: 2

2 Aug 1983

5120-12-151-6605
Montiervorrichtung

121516605
WKW9008-0904V1.2: RNCC: 3 | RNVC: 2
WKW9008-0904V1-2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-196-5030
Bearing And Bushing Inserter

121965030
79-882: RNCC: 3 | RNVC: 2

12 Jul 1983

5120-12-176-7295
Zylinderbolzen

121767295
VG95211-ML-121767295: RNCC: 2 | RNVC: 2
105-41069W1.04: RNCC: 3 | RNVC: 2
105-41069W1-04: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-147-3998
Gewindeschutzkappe

121473998
VG95211-ML-121473998: RNCC: 2 | RNVC: 2
160-88742-01: RNCC: 3 | RNVC: 2
160-88742-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-0029
Socket Wrench

123710029
6-202: RNCC: 3 | RNVC: 2

25 Jan 2007

5120-12-364-4831
Socket Wrench Socket

123644831
12270001-TCS: RNCC: 3 | RNVC: 2

1 Oct 2004

5120-12-170-9755
Inspection Mirror

121709755
5526: RNCC: 3 | RNVC: 2
140104: RNCC: 5 | RNVC: 2

26 Aug 1977

5120-12-176-7350
Bolzen

121767350
VG95211-ML-121767350: RNCC: 2 | RNVC: 2
1121-31502W1-03: RNCC: 3 | RNVC: 2

15 Dec 1978

5120-12-309-6554
Schluessel

123096554
335927-9009.000: RNCC: 3 | RNVC: 2
33 59 27-9009.000: RNCC: 5 | RNVC: 9
335927-9009-000: RNCC: 5 | RNVC: 9
335927-9009.000: RNCC: 5 | RNVC: 9

13 Feb 1987

5120-12-310-8771
Wuergezangenteil

123108771
S3-1294B: RNCC: 3 | RNVC: 2
1294: RNCC: 5 | RNVC: 2

3 Jul 1987

5120-12-364-3686
Bearing And Bushing Inserter And Remover

123643686
T671P5001118: RNCC: 3 | RNVC: 2

16 Sep 2004

5120-12-345-3358
Bearing And Bushing Inserter

123453358
7418-798-055: RNCC: 3 | RNVC: 2

3 Mar 1998

5120-12-198-5573
Bearing And Bushing Inserter

121985573
393496: RNCC: 3 | RNVC: 2

9 Feb 1984

5120-12-181-0269
Body And Fender Repair Punch

121810269
1608690008: RNCC: 3 | RNVC: 9

17 Oct 1979

5120-12-306-9368
Quick Adjusting Screw Clamp

123069368
20020007590021: RNCC: 3 | RNVC: 2

17 Apr 1986

5120-12-383-6816
Ge Montierwerkzeug

123836816
1X56.095.056: RNCC: 3 | RNVC: 2

24 Nov 2010

5120-12-176-1092
Einziehvorrichtung

121761092
10-203: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-123-5490
Socket Wrench

121235490
0140690: RNCC: 3 | RNVC: 2
WZ37: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-368-1101
Socket Head Screw Key

123681101
73100002-TCS: RNCC: 3 | RNVC: 2

8 Dec 2005

5120-12-394-2478
Socket Wrench Extension

123942478
BW-00001: RNCC: 3 | RNVC: 2

14 Nov 2013

5120-12-324-6098
Auf Ersatzteilsatz

123246098
314 05 000: RNCC: 3 | RNVC: 2
02-000108: RNCC: 5 | RNVC: 2

6 Mar 1991

5120-12-332-9812
Bearing And Bushing Inserter

123329812
346589031500: RNCC: 3 | RNVC: 2

18 Oct 1993

5120-12-384-7510
Screw Thread Insert Inserter

123847510
F30008741: RNCC: 3 | RNVC: 2

25 Mar 2011

5120-12-188-7194
Torque Wrench

121887194
R810626: RNCC: 3 | RNVC: 2
810626: RNCC: 5 | RNVC: 2
001589352100: RNCC: 5 | RNVC: 2
810626: RNCC: 5 | RNVC: 9

27 Jul 1981

5120-12-368-8544
Torque Wrench Adapter

123688544
770-S8: RNCC: 3 | RNVC: 2
00.52.10.69: RNCC: 5 | RNVC: 2

28 Apr 2006

5120-12-179-9704
Ausbauvorrichtung

121799704
142430: RNCC: 3 | RNVC: 2
80.99606-0091: RNCC: 5 | RNVC: 2
80996060091: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-326-1863
Screwdriver Bit

123261863
67514-1,3: RNCC: 3 | RNVC: 2

15 Aug 1991

5120-12-167-8761
Ausbauwerkzeug

121678761
MS90456-1: RNCC: 3 | RNVC: 2

31 Jan 1977

5120-12-139-3027
Schluessel

121393027
023M03500: RNCC: 3 | RNVC: 2
8205893107: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-134-2629
Socket Wrench

121342629
080M00500: RNCC: 3 | RNVC: 2
244017: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-312-6052
Open End Box Wrench

123126052
DIN3118-8X10: RNCC: 2 | RNVC: 2
1949M8X10: RNCC: 3 | RNVC: 2
TVA5120-2-263-029: RNCC: 5 | RNVC: 1
8X10DIN3118: RNCC: 5 | RNVC: 2
135107: RNCC: 5 | RNVC: 2
TVA5120-2-263-029/1.1.1: RNCC: 5 | RNVC: 2

20 Jan 1988

5120-12-196-6258
Adjustable Wrench

121966258
592-12: RNCC: 3 | RNVC: 2
225-12: RNCC: 5 | RNVC: 9
225-12: RNCC: 5 | RNVC: 9

25 Jul 1983

5120-12-342-2281
Socket Wrench Adapter

123422281
80996060208: RNCC: 3 | RNVC: 2
80.99606-0208: RNCC: 5 | RNVC: 2

8 Jan 1997

5120-12-189-9959
Einstell Schluessel

121899959
NO PRIMARY REF 12-189-9959: RNCC: 3 | RNVC: 2
416100: RNCC: 5 | RNVC: 9
416100: RNCC: 5 | RNVC: 9

2 Nov 1981

5120-12-177-0294
Spanner Wrench

121770294
363650: RNCC: 3 | RNVC: 9

8 Jan 1979

5120-12-198-5697
Socket Wrench

121985697
92MM A/F 17X19: RNCC: 3 | RNVC: 2
645-17X19: RNCC: 3 | RNVC: 2
1928110016: RNCC: 5 | RNVC: 2
092055: RNCC: 5 | RNVC: 2
07730: RNCC: 5 | RNVC: 2

9 Feb 1984

5120-12-368-4047
An Montierwerkzeug

123684047
311293: RNCC: 3 | RNVC: 2
0855-03-00-03/35: RNCC: 5 | RNVC: 2

7 Mar 2006

5120-12-133-4277
Sperringzieher

121334277
45212: RNCC: 3 | RNVC: 2
279: RNCC: 5 | RNVC: 9
TK-BA35-5120-461: RNCC: 5 | RNVC: 9
TK-E59C-5120-015: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-2667
Laeppwer Laeppkopf

123402667
652-37: RNCC: 3 | RNVC: 2

20 Mar 1996

5120-12-194-1739
Hyd Einbauwerkzeug

121941739
MAGERD 1617: RNCC: 3 | RNVC: 2
4S55118-0000: RNCC: 3 | RNVC: 2

7 Oct 1982

5120-12-123-5769
Socket Wrench Socket

121235769
DIN3124-15X10L: RNCC: 2 | RNVC: 2
870-T15: RNCC: 3 | RNVC: 2
880TZ-15: RNCC: 3 | RNVC: 2
A7402DM-15: RNCC: 3 | RNVC: 2
09570: RNCC: 5 | RNVC: 2
15X10LDIN3124: RNCC: 5 | RNVC: 2
00.46.48.89: RNCC: 5 | RNVC: 2
1820183: RNCC: 5 | RNVC: 2
880TZ15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-383-4005
Seal Inserter

123834005
58512-0014: RNCC: 3 | RNVC: 2

15 Oct 2010

5120-12-379-8527
Socket Wrench Set

123798527
6151450: RNCC: 3 | RNVC: 2
6151450: RNCC: 5 | RNVC: 2
4010886615140: RNCC: 5 | RNVC: 2
19QMU-10: RNCC: 5 | RNVC: 2

8 Sep 2009

5120-12-361-1955
Boerdelwer Einsatz

123611955
80996250025: RNCC: 3 | RNVC: 2
80.99625-0025: RNCC: 5 | RNVC: 2

2 Sep 2003

5120-12-364-6798
Socket Wrench Socket

123646798
03010032-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-385-5839
Engine Valve Seat Insert Replacing Tool

123855839
F70270051: RNCC: 3 | RNVC: 2

17 Jun 2011

5120-12-364-5637
Combination Box And Open End Wrench

123645637
40082626-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-335-4645
Spanner Wrench

123354645
0852 3847: RNCC: 3 | RNVC: 2
8523847: RNCC: 5 | RNVC: 2

19 Aug 1994

5120-12-306-5704
Torque Wrench Adapter

123065704
4985066: RNCC: 3 | RNVC: 2

11 Mar 1986

5120-12-325-6662
Electrical Contact Inserter

123256662
NO PRIMARY REF 12-325-6662: RNCC: 3 | RNVC: 2
7820353145: RNCC: 5 | RNVC: 2
5105.020.17.01: RNCC: 5 | RNVC: 2
78203 53145: RNCC: 5 | RNVC: 9

27 Jun 1991

5120-12-150-7598
Spanner Wrench

121507598
510280-00-03: RNCC: 2 | RNVC: 2
JB168-20-01: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-140-9246
Socket Wrench

121409246
DIN7417-8GTW: RNCC: 2 | RNVC: 2
909125802: RNCC: 3 | RNVC: 2
SZ2548.000: RNCC: 3 | RNVC: 2
3070-0023-00-00: RNCC: 3 | RNVC: 2
44326-00600: RNCC: 3 | RNVC: 2
10.047004: RNCC: 3 | RNVC: 2
8DIN7417GTW: RNCC: 5 | RNVC: 2
44326-006: RNCC: 5 | RNVC: 2
710-8X8: RNCC: 5 | RNVC: 2
2195-8MMVIERKANT: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-370-1208
Socket Wrench Socket

123701208
19L-19: RNCC: 3 | RNVC: 2
51S-19: RNCC: 3 | RNVC: 2
1718835: RNCC: 5 | RNVC: 2
03240019: RNCC: 5 | RNVC: 2

22 Sep 2006

5120-12-129-8788
Abziehzange

121298788
1687965011: RNCC: 3 | RNVC: 2
EF3111: RNCC: 5 | RNVC: 2
KDAW9995-11: RNCC: 5 | RNVC: 9
1687965011: RNCC: 5 | RNVC: 9
EF3111: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-7308
Einpreszwerkzeug

121767308
VG95211-ML-121767308: RNCC: 2 | RNVC: 2
105-45361W2: RNCC: 3 | RNVC: 2

15 Dec 1978

5120-12-371-5536
Socket Wrench Screwdriver Attachment

123715536
DIN7422-19-25: RNCC: 2 | RNVC: 2

18 Apr 2007

5120-12-170-8569
Spanner Wrench

121708569
NO PRIMARY REF 12-170-8569: RNCC: 3 | RNVC: 2
195392: RNCC: 5 | RNVC: 2
195392: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-305-2985
Socket Wrench

123052985
343-5,5X65: RNCC: 3 | RNVC: 2
52162-055: RNCC: 5 | RNVC: 2

18 Oct 1985

5120-12-312-2109
Montage- Hebel

123122109
105-45041W4: RNCC: 3 | RNVC: 2

3 Dec 1987

5120-12-382-7456
Cross Tip Screwdriver

123827456
46651002-TCS: RNCC: 3 | RNVC: 2

4 Aug 2010

5120-12-134-2661
Schluessel

121342661
014M07100: RNCC: 3 | RNVC: 2
VM57386: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-194-8772
Socket Wrench Set

121948772
D19WAZ: RNCC: 3 | RNVC: 2
615 064: RNCC: 5 | RNVC: 2
615064: RNCC: 5 | RNVC: 2

14 Dec 1982

5120-12-131-3937
Gleisk Druckplatte

121313937
131-08-02-10: RNCC: 3 | RNVC: 2
510069EB131-08-02-10: RNCC: 5 | RNVC: 2
3901516: RNCC: 5 | RNVC: 2
583901516: RNCC: 5 | RNVC: 9
583901516: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1589
Pliers

121261589
426BECU250: RNCC: 3 | RNVC: 2
426BECU250: RNCC: 3 | RNVC: 9
277-250: RNCC: 5 | RNVC: 9
250DIN5247: RNCC: 5 | RNVC: 9
DIN5247-250: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-2121
Seal Inserter

123402121
80996066021: RNCC: 3 | RNVC: 2
9200324000: RNCC: 3 | RNVC: 2
920032-4000: RNCC: 5 | RNVC: 2

14 Mar 1996

5120-12-173-8459
Hand Hydraulic Jack

121738459
TL5120-0090-60: RNCC: 2 | RNVC: 2
208632.8: RNCC: 3 | RNVC: 2
26534-9: RNCC: 5 | RNVC: 2
26534.9: RNCC: 5 | RNVC: 2
305354.7: RNCC: 5 | RNVC: 2
311299.3: RNCC: 5 | RNVC: 2
ADX4-370: RNCC: 5 | RNVC: 2
HUD5-370: RNCC: 5 | RNVC: 2
0005839815: RNCC: 5 | RNVC: 2
13381.7: RNCC: 5 | RNVC: 9

16 May 1978

5120-12-316-9103
Drive Pin Punch

123169103
DIN6450-C7: RNCC: 2 | RNVC: 9
4130-7: RNCC: 3 | RNVC: 2
00.08.18.42: RNCC: 5 | RNVC: 2
8420L-7 CVN: RNCC: 5 | RNVC: 9

22 Feb 1989

5120-12-306-4033
Bedienteil Hebel

123064033
4900238-1100: RNCC: 2 | RNVC: 2
49.011.11000.00E: RNCC: 3 | RNVC: 2
4900238-1100: RNCC: 5 | RNVC: 2

26 Feb 1986

5120-12-374-3597
Socket Wrench Socket

123743597
02040011-TCS: RNCC: 3 | RNVC: 2

11 Feb 2008

5120-12-357-7432
Combination Box And Open End Wrench

123577432
V6530-08003-011 W87.01: RNCC: 3 | RNVC: 2

18 Jul 2002

5120-12-303-8688
Pipe Wrench

123038688
4922 25014: RNCC: 3 | RNVC: 2

10 May 1985

5120-12-145-9604
Mechanical Puller

121459604
1365893333: RNCC: 3 | RNVC: 2
136589333300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-3081
Dorn

121393081
8205890843: RNCC: 3 | RNVC: 2
016M03000: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-342-2426
Schluessel

123422426
80996100008: RNCC: 3 | RNVC: 2

9 Jan 1997

5120-12-192-9157
Schluessel

121929157
23111-7159.00: RNCC: 2 | RNVC: 2
23111-7159.00: RNCC: 5 | RNVC: 2
1115072: RNCC: 5 | RNVC: 9
23111-7159.00: RNCC: 5 | RNVC: 9

3 Jun 1982

5120-12-382-0325
Socket Head Screw Key Set

123820325
151.2470: RNCC: 3 | RNVC: 2

29 Apr 2010

5120-12-192-7715
Face Spanner Wrench Socket

121927715
115589010700: RNCC: 3 | RNVC: 2

24 May 1982

5120-12-365-9435
Electronic Equipment Alignment Tool

123659435
T4843 10: RNCC: 3 | RNVC: 2

21 Feb 2005

5120-12-130-6242
Socket Wrench

121306242
WZ33: RNCC: 3 | RNVC: 2
0140687: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-385-5483
Socket Wrench Socket

123855483
F30375843: RNCC: 3 | RNVC: 2

15 Jun 2011

5120-12-382-8884
Spanner Wrench

123828884
G020.26: RNCC: 3 | RNVC: 2
7040110: RNCC: 5 | RNVC: 2

19 Aug 2010

5120-12-357-7354
Montierdorn

123577354
F30276073: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-385-7687
Open End Wrench

123857687
10075231: RNCC: 3 | RNVC: 2

7 Jul 2011

5120-12-189-4627
Valve Tappet Adjusting Tool

121894627
387589000900: RNCC: 3 | RNVC: 2

29 Sep 1981

5120-12-326-2689
Bearing And Bushing Inserter

123262689
F30140768: RNCC: 3 | RNVC: 2

23 Aug 1991

5120-12-023-0167

5120-12-317-5196
Zange Einsatz

123175196
F18801: RNCC: 3 | RNVC: 2

14 Apr 1989

5120-12-382-7455
Cross Tip Screwdriver

123827455
46651000-TCS: RNCC: 3 | RNVC: 2

4 Aug 2010

5120-12-345-4453
Inspection Mirror

123454453
12920: RNCC: 3 | RNVC: 2
77 40 00 01: RNCC: 5 | RNVC: 2

17 Mar 1998

5120-12-094-1226

5120-12-363-7030
Seal Inserter

123637030
467-449/5183-21-00-25: RNCC: 3 | RNVC: 2
6902000006: RNCC: 5 | RNVC: 2

15 Jul 2004

5120-12-300-4174
Dre Einbauwerkzeug

123004174
V6570-12003-011: RNCC: 3 | RNVC: 2
V6570-12003-011: RNCC: 5 | RNVC: 9

1 Aug 1984

5120-12-333-6428
Drive Pin Punch

123336428
1600-39: RNCC: 3 | RNVC: 2
663395: RNCC: 5 | RNVC: 2

17 Jan 1994

5120-12-335-3505
Schluesseleinsatz

123353505
2012002300: RNCC: 3 | RNVC: 2
2012002300: RNCC: 5 | RNVC: 2

11 Aug 1994

5120-12-023-1413

5120-12-318-0767
Cross Tip Screwdriver

123180767
06300: RNCC: 3 | RNVC: 9

8 Jun 1989

5120-12-172-0319
Pliers

121720319
2660B: RNCC: 3 | RNVC: 2
130480: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-314-8379
Socket Wrench Set

123148379
NO PRIMARY REF 12-314-8379: RNCC: 3 | RNVC: 2
850A: RNCC: 5 | RNVC: 9

17 Aug 1988

5120-12-187-7470
Drive Pin Punch Set

121877470
TL5120-0091: RNCC: 2 | RNVC: 2
1780 IM BLECHKASTEN: RNCC: 3 | RNVC: 9
51285010: RNCC: 3 | RNVC: 9
644: RNCC: 3 | RNVC: 9
54361101: RNCC: 3 | RNVC: 9
TK5120-046: RNCC: 5 | RNVC: 9

4 May 1981

5120-12-126-1797
Saddler's Awl Haft

121261797
313320: RNCC: 3 | RNVC: 2
928: RNCC: 5 | RNVC: 2
5180-0056-11: RNCC: 5 | RNVC: 9
5180-056-11: RNCC: 5 | RNVC: 9
TL5180-0056-11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-193-0240
Socket Wrench Extension

121930240
NM 297-51: RNCC: 3 | RNVC: 2
NM297-51: RNCC: 5 | RNVC: 2
NM 297-51: RNCC: 5 | RNVC: 9
NM297-51: RNCC: 5 | RNVC: 9

15 Jun 1982

5120-12-010-9638

5120-12-364-2842
Socket Head Screw Key

123642842
05023125001: RNCC: 3 | RNVC: 2
354-6,0X80: RNCC: 5 | RNVC: 2
023125: RNCC: 5 | RNVC: 9

7 Sep 2004

5120-12-193-9164
Torque Wrench

121939164
NO PRIMARY REF 12-193-9164: RNCC: 3 | RNVC: 2
73NM/12: RNCC: 5 | RNVC: 9

13 Sep 1982

5120-12-374-6071
Rotat Holding Tool

123746071
5075890040/00: RNCC: 3 | RNVC: 2

28 Feb 2008

5120-12-337-1933
Hand Powered Poppet Valve Lapper

123371933
11.49008-0058: RNCC: 3 | RNVC: 2
113.036: RNCC: 5 | RNVC: 2
11.49008-0058: RNCC: 5 | RNVC: 9
113.036: RNCC: 5 | RNVC: 9

31 Jan 1995

5120-12-170-6978
Pin Remover

121706978
K4244-0200: RNCC: 3 | RNVC: 9

28 Jul 1977

5120-12-392-6625
Mechanical Puller Set

123926625
CTP40320G001: RNCC: 3 | RNVC: 2

26 Jun 2013

5120-12-385-6934
Mechanical Puller Attachment

123856934
1X46 175 575: RNCC: 3 | RNVC: 2

30 Jun 2011

5120-12-171-1933
Montagewerkzeug

121711933
1X56 091 173: RNCC: 3 | RNVC: 2
81.66850-0013: RNCC: 5 | RNVC: 2
81668500013: RNCC: 5 | RNVC: 2
1X56091173: RNCC: 5 | RNVC: 9

16 Sep 1977

5120-12-172-1871
Aufspannvorrichtung

121721871
0S51612-0000: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-175-3470
Einsteck Schluessel

121753470
1400003-13043-01: RNCC: 3 | RNVC: 2

11 Sep 1978

5120-12-154-6333
Dorn

121546333
016M10600: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-308-6973
Woven Cable Grip

123086973
01670: RNCC: 3 | RNVC: 2

10 Nov 1986

5120-12-339-9183
Pliers

123399183
F30279322: RNCC: 3 | RNVC: 2
F3 0279322: RNCC: 5 | RNVC: 2

1 Feb 1996

5120-12-362-5921
Hand Hammer

123625921
54.0084.960.80: RNCC: 3 | RNVC: 2
51196200: RNCC: 5 | RNVC: 2

10 Mar 2004

5120-12-155-9491
Craftsman's Tweezers

121559491
NM451-03: RNCC: 3 | RNVC: 2
NM451-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-3252
Mechanical Puller

123403252
1X56 137 788: RNCC: 3 | RNVC: 2

26 Mar 1996

5120-12-389-5082
Torque Wrench Adapter

123895082
R809304: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-337-1494
Mechanical Puller

123371494
60436391: RNCC: 3 | RNVC: 2

25 Jan 1995

5120-12-342-6693
Bearing And Bushing Inserter

123426693
18781 24254: RNCC: 2 | RNVC: 2
1878124254: RNCC: 3 | RNVC: 2
18781 24254: RNCC: 5 | RNVC: 9

13 Mar 1997

5120-12-125-2648

5120-12-343-6680
Hand Tube Bender

123436680
257100: RNCC: 3 | RNVC: 2

14 Jul 1997

5120-12-190-0403
Torque Wrench Adapter

121900403
2300109-990940.000.0: RNCC: 2 | RNVC: 2
2300109-990940.000.0: RNCC: 3 | RNVC: 2
2300109-990940.000.0: RNCC: 3 | RNVC: 2
5120700038: RNCC: 5 | RNVC: 2
2300109-990940-000-0: RNCC: 5 | RNVC: 2

4 Nov 1981

5120-12-183-9523
Spanner Wrench

121839523
165836: RNCC: 3 | RNVC: 2
S9-760-53: RNCC: 5 | RNVC: 2
15-1111-3: RNCC: 5 | RNVC: 9

3 Jun 1980

5120-12-304-2532
Seal Inserter

123042532
3B33-2-2: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-12-389-4040
Pedal Adjustment Tool Compressor

123894040
P-0245-100: RNCC: 3 | RNVC: 2

2 Jul 2012

5120-12-186-7348
Mechanical Puller Step Plate

121867348
NO PRIMARY REF 12-186-7348: RNCC: 3 | RNVC: 2
410260: RNCC: 5 | RNVC: 2
410260: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-320-5622
Combination Box And Open End Wrench

123205622
NO PRIMARY REF 12-320-5622: RNCC: 3 | RNVC: 2
16-5,5: RNCC: 5 | RNVC: 9
16-5.5: RNCC: 5 | RNVC: 9
40095555: RNCC: 5 | RNVC: 9
1B-5,5: RNCC: 5 | RNVC: 9

26 Jan 1990

5120-12-334-6124
Dre Einbauwerkzeug

123346124
4900401-411242.01: RNCC: 2 | RNVC: 2
4900401-411242.01: RNCC: 3 | RNVC: 2

30 May 1994

5120-12-146-0583
Spanner Wrench

121460583
510151: RNCC: 2 | RNVC: 2
23114-7101-01: RNCC: 2 | RNVC: 2
510151: RNCC: 5 | RNVC: 2
510151: RNCC: 5 | RNVC: 9
510151: RNCC: 5 | RNVC: 9
23114-7101-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-365-2923
Montierdorn

123652923
8098 798 654: RNCC: 3 | RNVC: 2

16 Dec 2004

5120-12-188-8169
Spanner Wrench

121888169
83.09195.0018: RNCC: 3 | RNVC: 2

30 Jul 1981

5120-12-193-8241
Nietzugst Fuehrung

121938241
349443: RNCC: 3 | RNVC: 2

2 Sep 1982

5120-12-348-2844
Screwdriver Bit

123482844
05002960001: RNCC: 3 | RNVC: 2
86-PZ1-PZ2: RNCC: 5 | RNVC: 2
002960: RNCC: 5 | RNVC: 9

25 May 1999

5120-12-044-4900

5120-12-313-4053
Open End Box Wrench

123134053
24-18X21: RNCC: 3 | RNVC: 2
41081821: RNCC: 5 | RNVC: 2
00.27.94.78: RNCC: 5 | RNVC: 2

29 Mar 1988

5120-12-368-9403
Tap And Reamer Extension

123689403
DIN377-29: RNCC: 2 | RNVC: 2
207123: RNCC: 3 | RNVC: 2
170-29MM: RNCC: 3 | RNVC: 2
01.42.35.73: RNCC: 5 | RNVC: 2

8 May 2006

5120-12-139-3609
Socket Wrench Handle Bar

121393609
GF165072: RNCC: 3 | RNVC: 2
F1311-650720: RNCC: 5 | RNVC: 2
GF165072: RNCC: 5 | RNVC: 2
F1311-650720: RNCC: 5 | RNVC: 2
100139-070000-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-9497
Socket Wrench

121559497
NM393-08: RNCC: 3 | RNVC: 2
NM393-08: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-154-2567
Pruefg Distanzring

121542567
5191154-200-19: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-343-8661
Hand Hammer

123438661
2156: RNCC: 3 | RNVC: 2
10770: RNCC: 3 | RNVC: 2
70 13 00 01: RNCC: 5 | RNVC: 2
02156000000: RNCC: 5 | RNVC: 2

7 Aug 1997

5120-12-320-0855
Hand Yoke Riveter

123200855
502: RNCC: 3 | RNVC: 2

6 Dec 1989

5120-12-342-1975
Schraubendrehersatz

123421975
539-390: RNCC: 3 | RNVC: 2

2 Jan 1997

5120-12-174-4091
Abzi Einsatzstueck

121744091
7882393: RNCC: 3 | RNVC: 2
1000025-850000-07: RNCC: 5 | RNVC: 2
1000025-850000.07: RNCC: 5 | RNVC: 2
7882-393: RNCC: 5 | RNVC: 2

29 Jun 1978

5120-12-155-9376
Socket Head Screw Key

121559376
NM290-63: RNCC: 3 | RNVC: 2
NM290-63: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-185-6478
Drive Pin Punch

121856478
260040: RNCC: 3 | RNVC: 9

21 Oct 1980

5120-12-094-1541

5120-12-133-4573

5120-12-330-5541
Stud Inserter

123305541
0851 0491: RNCC: 3 | RNVC: 2
8510491: RNCC: 5 | RNVC: 2

8 Jan 1993

5120-12-365-5155
Flat Tip Screwdriver

123655155
T49025 3025: RNCC: 3 | RNVC: 2

11 Jan 2005

5120-12-321-1541
Mechanical Puller

123211541
F6147633: RNCC: 3 | RNVC: 2
F6147633: RNCC: 5 | RNVC: 2
F620001147633: RNCC: 5 | RNVC: 2
F6147633: RNCC: 5 | RNVC: 2
F620001147633: RNCC: 5 | RNVC: 2
F620001147633: RNCC: 5 | RNVC: 2

6 Apr 1990

5120-12-130-3376
Tap And Reamer Extension

121303376
DIN377-7: RNCC: 2 | RNVC: 2
83320: RNCC: 3 | RNVC: 2
207109: RNCC: 3 | RNVC: 2
3110-7: RNCC: 3 | RNVC: 2
807-7: RNCC: 3 | RNVC: 2
7DIN377: RNCC: 5 | RNVC: 2
4826-7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-183-0824
Bearing And Bushing Inserter

121830824
4604D100285-2: RNCC: 3 | RNVC: 2

18 Mar 1980

5120-12-324-0728
Socket Wrench Screwdriver Attachment

123240728
TL5120-0102-010: RNCC: 2 | RNVC: 2
A6709M-2.5: RNCC: 3 | RNVC: 2
DIN7422-2,5-6,3: RNCC: 5 | RNVC: 1
1753740: RNCC: 5 | RNVC: 2
A6709M-2,5: RNCC: 5 | RNVC: 2
175374: RNCC: 5 | RNVC: 9

18 Jan 1991

5120-12-123-5363
Socket Wrench Handle Bar

121235363
433-0619: RNCC: 3 | RNVC: 2
01200: RNCC: 5 | RNVC: 2
2636980001: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-340-7811
Swivel Knob Jeweler's Screwdriver

123407811
260-1,5X40: RNCC: 3 | RNVC: 2
6853 490-186: RNCC: 5 | RNVC: 2

12 Jun 1996

5120-12-130-5302
Etching Needle

121305302
NO PRIMARY REF 12-130-5302: RNCC: 3 | RNVC: 2
673-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-3484
Lifting Pneumatic Bag Kit

123053484
4940-002: RNCC: 2 | RNVC: 9
19001015/2: RNCC: 5 | RNVC: 9
X300: RNCC: 5 | RNVC: 9
4940-00436: RNCC: 6 | RNVC: 9

24 Oct 1985

5120-12-198-4227
Fuehrungs- Platte

121984227
2.72-15868: RNCC: 3 | RNVC: 2
2.72-15868: RNCC: 5 | RNVC: 2

26 Jan 1984

5120-12-343-3847
Hand Material Handling Hook

123433847
437589001100: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-339-1124
Piston Inserter

123391124
5870 654 018: RNCC: 3 | RNVC: 2
141.5870.654018: RNCC: 5 | RNVC: 2

11 Oct 1995

5120-12-342-8698
Crimping Tool Die

123428698
R95: RNCC: 3 | RNVC: 2

10 Apr 1997

5120-12-318-9098
Hand Tube Bender

123189098
0-20-000-000-40700: RNCC: 3 | RNVC: 2

24 Aug 1989

5120-12-372-1685
Torque Wrench Adapter

123721685
7212-18: RNCC: 3 | RNVC: 2
732/10-18: RNCC: 3 | RNVC: 2
58221018: RNCC: 5 | RNVC: 2
4002805722183: RNCC: 5 | RNVC: 2
7678160: RNCC: 5 | RNVC: 2

22 Jun 2007

5120-12-301-2246
Flat Tip Screwdriver

123012246
762-6X250: RNCC: 3 | RNVC: 2
762-250: RNCC: 5 | RNVC: 2

28 Sep 1984

5120-12-317-1242
Fuse Puller

123171242
CD.G100.01.14.000: RNCC: 2 | RNVC: 2
CD.G100.01.14.000: RNCC: 3 | RNVC: 2

10 Mar 1989

5120-12-351-9433
Socket Wrench

123519433
5022575001: RNCC: 3 | RNVC: 2

19 Sep 2000

5120-12-370-5948
Slip Joint Pliers

123705948
8705300: RNCC: 3 | RNVC: 2
00.13.15.54: RNCC: 5 | RNVC: 2
4003773014126: RNCC: 5 | RNVC: 2

27 Nov 2006

5120-12-123-5303

5120-12-197-0336
Socket Wrench Screwdriver Attachment

121970336
44A-5/32: RNCC: 3 | RNVC: 2
999/4/42556/468: RNCC: 5 | RNVC: 1
01450010: RNCC: 5 | RNVC: 2
01 45 00 10: RNCC: 5 | RNVC: 9
44A5/32: RNCC: 5 | RNVC: 9

12 Sep 1983

5120-12-194-9997
Crowbar

121949997
711A001-3000: RNCC: 3 | RNVC: 9
63321: RNCC: 3 | RNVC: 9

28 Dec 1982

5120-12-174-6471
Hand Manhole Cover Hook

121746471
44951: RNCC: 3 | RNVC: 9
905-560: RNCC: 5 | RNVC: 9

17 Jul 1978

5120-12-126-2102
Sheet Metalworking Stake

121262102
631B193: RNCC: 3 | RNVC: 2
5066-350: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-7132
Spanner Wrench

121997132
IR915515: RNCC: 3 | RNVC: 2
4900237-13: RNCC: 5 | RNVC: 2
IR915515: RNCC: 5 | RNVC: 9

24 May 1984

5120-12-142-0272
Mechanical Puller Adapter

121420272
559: RNCC: 3 | RNVC: 2
TS5120-0657-559: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-190-7739
Bearing And Bushing Inserter

121907739
144500: RNCC: 3 | RNVC: 2

14 Dec 1981

5120-12-369-9498
Slip Joint Pliers

123699498
T3659A 175: RNCC: 3 | RNVC: 2
966030: RNCC: 3 | RNVC: 2
3659A 175: RNCC: 5 | RNVC: 2

30 Aug 2006

5120-12-385-5561
Cran Mounting Tool

123855561
Y4342072: RNCC: 3 | RNVC: 2

15 Jun 2011

5120-12-362-5497
Mechanical Puller

123625497
667 589 03 63 00: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-12-324-3207
Mitnehmersch Stift

123243207
F15019: RNCC: 3 | RNVC: 2

6 Feb 1991

5120-12-362-4107
Cross Tip Screwdriver

123624107
T49087 1: RNCC: 3 | RNVC: 2

18 Feb 2004

5120-12-146-2969
R Hydraulikspindel

121462969
4015891033: RNCC: 3 | RNVC: 2
401589103300: RNCC: 5 | RNVC: 2
4015891033: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-333-4795
Piston Inserter

123334795
9108510239: RNCC: 3 | RNVC: 2

22 Dec 1993

5120-12-324-9230
Mitnehmersch Stift

123249230
15 503: RNCC: 3 | RNVC: 2

10 Apr 1991

5120-12-176-1113
Retaining Ring Pliers

121761113
VW1275: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-130-2625
Etching Needle

121302625
NO PRIMARY REF 12-130-2625: RNCC: 3 | RNVC: 2
673-3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-333-5677
Drive Pin Punch

123335677
076-240080-903-0: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-362-7003
Socket Wrench Set

123627003
852A-1: RNCC: 3 | RNVC: 2

19 Mar 2004

5120-12-192-0370
Socket Head Screw Key

121920370
334-8,0X350: RNCC: 3 | RNVC: 2
334-8X350: RNCC: 5 | RNVC: 9

22 Mar 1982

5120-12-183-0835
Socket Wrench Screwdriver Attachment

121830835
TL5120-0102-201: RNCC: 2 | RNVC: 2
2054/14: RNCC: 3 | RNVC: 2
8209820: RNCC: 5 | RNVC: 2
8470742: RNCC: 5 | RNVC: 2
1X56136863: RNCC: 5 | RNVC: 2

18 Mar 1980

5120-12-171-3154
Zwischenring

121713154
105-31781W3.02: RNCC: 3 | RNVC: 2
105-31781W3-02: RNCC: 5 | RNVC: 2

29 Sep 1977

5120-12-343-3844
Montierdorn

123433844
427589094300: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-010-9667

5120-12-092-2262

5120-12-309-8017
Seal Inserter

123098017
4.124-E2-2/30: RNCC: 3 | RNVC: 9

3 Mar 1987

5120-12-389-4371
Plier Clamp

123894371
86 05 250: RNCC: 3 | RNVC: 2
4003773047841: RNCC: 5 | RNVC: 2
813720-250: RNCC: 5 | RNVC: 2

5 Jul 2012

5120-12-327-6354
Face Spanner Wrench Socket

123276354
450900-0974: RNCC: 3 | RNVC: 2

11 Feb 1992

5120-12-151-6542
Geha Montagestueck

121516542
1004-0100V8: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-357-0407
Claw Bar

123570407
7102-0024: RNCC: 3 | RNVC: 2
ERDNAGELEISEN: RNCC: 5 | RNVC: 2

25 Apr 2002

5120-12-152-5617
Ventilf Schluessel

121525617
530-162FA: RNCC: 3 | RNVC: 2
169101902: RNCC: 5 | RNVC: 2
7101-86-23-10: RNCC: 5 | RNVC: 9
7101-86-23.10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-366-6386
Socket Wrench Extension

123666386
1990-7: RNCC: 3 | RNVC: 2
6142890: RNCC: 5 | RNVC: 2

18 May 2005

5120-12-357-7366
Spring Inserter And Remover

123577366
F6091604: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-379-1999
Bearing And Bushing Inserter

123791999
105-40131W1: RNCC: 3 | RNVC: 2

2 Jul 2009

5120-12-350-4797
Spanner Wrench

123504797
1668475: RNCC: 3 | RNVC: 2
1668474: RNCC: 5 | RNVC: 2

4 Apr 2000

5120-12-368-1015
Cross Tip Screwdriver

123681015
47651002-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-166-1956
Dorn

121661956
1X56136568: RNCC: 3 | RNVC: 2
8207700: RNCC: 5 | RNVC: 2
8470229: RNCC: 5 | RNVC: 2

12 Aug 1976

5120-12-359-6604
Open End Wrench

123596604
TL5120-0001-105: RNCC: 2 | RNVC: 2
6-13X16: RNCC: 3 | RNVC: 2
DIN3110-13X16: RNCC: 5 | RNVC: 1
003110013010: RNCC: 5 | RNVC: 9

25 Feb 2003

Load More Results