What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 40 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 40 of 62

5120-12-330-0649
Socket Wrench Screwdriver Attachment

123300649
8801-5: RNCC: 3 | RNVC: 2
H24100: RNCC: 5 | RNVC: 2
8801-5: RNCC: 5 | RNVC: 2

29 Oct 1992

5120-12-300-8568
Mechanical Puller Adapter

123008568
1423-200.83(4): RNCC: 3 | RNVC: 2
A37340: RNCC: 5 | RNVC: 2

5 Sep 1984

5120-12-340-2206
Seal Inserter And Remover

123402206
2300232-992000.006.0: RNCC: 2 | RNVC: 2
2300232-992000.006.0: RNCC: 3 | RNVC: 2

15 Mar 1996

5120-12-341-0410
Open End Wrench

123410410
2300232-991000.037.0: RNCC: 2 | RNVC: 2
2300232-991000.037.0: RNCC: 3 | RNVC: 2

19 Jul 1996

5120-12-349-4150
Socket Head Screw Key

123494150
2300211-991000.001.0: RNCC: 2 | RNVC: 2
2300211-991000.001.0: RNCC: 3 | RNVC: 2

11 Nov 1999

5120-12-192-1322
Socket Wrench Socket

121921322
900MGT: RNCC: 3 | RNVC: 2
5719750014: RNCC: 5 | RNVC: 2

24 Mar 1982

5120-12-322-2465
Duese Reiniger

123222465
9000 8267: RNCC: 3 | RNVC: 2

3 Aug 1990

5120-12-139-3028
Schluesseleinsatz

121393028
8205893207: RNCC: 3 | RNVC: 2
023M04100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-196-7379
Face Spanner Wrench Socket

121967379
1X56137111: RNCC: 3 | RNVC: 2
0535783: RNCC: 5 | RNVC: 2
8470748: RNCC: 5 | RNVC: 2
8209826: RNCC: 5 | RNVC: 2

9 Aug 1983

5120-12-176-2803
Dorn

121762803
1X56112757: RNCC: 3 | RNVC: 2

23 Nov 1978

5120-12-335-4453
Mechanical Puller

123354453
0852 0365: RNCC: 3 | RNVC: 2
8520365: RNCC: 5 | RNVC: 2

18 Aug 1994

5120-12-391-9082
Mecha Ejector Tool

123919082
1516: RNCC: 3 | RNVC: 2
78600006: RNCC: 5 | RNVC: 2

18 Apr 2013

5120-12-171-4649
Tacker

121714649
6565: RNCC: 3 | RNVC: 9

13 Oct 1977

5120-12-359-6143
Eindrueckwerkzeugte

123596143
T631P3003120: RNCC: 3 | RNVC: 2

21 Feb 2003

5120-12-196-1652
Mechanical Puller

121961652
35-940F005: RNCC: 3 | RNVC: 2

7 Jun 1983

5120-12-391-4089
Hose Strap Band Clamping Tool

123914089
T14141: RNCC: 3 | RNVC: 2

11 Mar 2013

5120-12-150-3948
Dorn

121503948
837589194300: RNCC: 3 | RNVC: 2
8375891943: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-192-8053
Bearing And Bushing Inserter

121928053
360 589 00 15 00: RNCC: 3 | RNVC: 2
360589001500: RNCC: 3 | RNVC: 2

26 May 1982

5120-12-337-8380
Leveling-Support Jack

123378380
SH0.090.002.101: RNCC: 3 | RNVC: 2

20 Apr 1995

5120-12-310-3080
Flat Tip Screwdriver

123103080
3512 118 1726 1: RNCC: 3 | RNVC: 2
351211817261: RNCC: 5 | RNVC: 2

8 May 1987

5120-12-306-7423
Seal Inserter

123067423
9998618: RNCC: 3 | RNVC: 2
SE288400A: RNCC: 5 | RNVC: 2

25 Mar 1986

5120-12-175-8177
Spanner Wrench

121758177
264-615: RNCC: 3 | RNVC: 2

1 Dec 2003

5120-12-364-4637
Bearing And Bushing Inserter

123644637
200 890 019: RNCC: 3 | RNVC: 2

29 Sep 2004

5120-12-196-9825
Screw Thread Insert Inserter

121969825
01500205000: RNCC: 3 | RNVC: 2

7 Sep 1983

5120-12-385-2594
Hand-Operated Grommet And Eyelet Press

123852594
50.000.049: RNCC: 3 | RNVC: 2

13 May 2011

5120-12-181-6874
Spezial- Schluessel

121816874
VW178: RNCC: 3 | RNVC: 9

10 Dec 1979

5120-12-314-1739
Mechanical Puller

123141739
0852 6078: RNCC: 3 | RNVC: 2
8526078: RNCC: 5 | RNVC: 2

15 Jun 1988

5120-12-365-3304
Seal Inserter

123653304
5580342: RNCC: 3 | RNVC: 2
(241)A42495580342: RNCC: 8 | RNVC: 2
5580342: RNCC: 8 | RNVC: 2

21 Dec 2004

5120-12-093-7232

5120-12-130-9500
Socket Head Screw Key

121309500
DIN6911-6: RNCC: 2 | RNVC: 2
CS6: RNCC: 3 | RNVC: 2
WA59: RNCC: 3 | RNVC: 2
6DIN6911: RNCC: 5 | RNVC: 2
134421: RNCC: 5 | RNVC: 9
1997MF6: RNCC: 5 | RNVC: 9
2094-06: RNCC: 5 | RNVC: 9
57416: RNCC: 5 | RNVC: 9
6DIN6911GALNI8: RNCC: 5 | RNVC: 9
43504: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-350-2555
Quick Adjusting Screw Clamp

123502555
319/11,5: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-306-7422
Seal Inserter

123067422
9998623: RNCC: 3 | RNVC: 2
SE296100A: RNCC: 5 | RNVC: 2

25 Mar 1986

5120-12-388-2630
Carrier Socket

123882630
40682: RNCC: 3 | RNVC: 2

7 Mar 2012

5120-12-364-3374
Socket Wrench Socket

123643374
02010012-TCS: RNCC: 3 | RNVC: 2

11 Sep 2004

5120-12-329-9661
Mechanical Puller Attachment

123299661
0852 5118.007: RNCC: 3 | RNVC: 2
8525118.007: RNCC: 5 | RNVC: 2

16 Oct 1992

5120-12-364-9566
Swivel Knob Jeweler's Screwdriver

123649566
4877X ESD TX04X50: RNCC: 3 | RNVC: 2
T4877XESDTX04X50: RNCC: 5 | RNVC: 9

18 Nov 2004

5120-12-358-5419
Electrical Contact Inserter

123585419
1669620000: RNCC: 3 | RNVC: 2
166962: RNCC: 5 | RNVC: 2
ZBW 1: RNCC: 5 | RNVC: 2

23 Oct 2002

5120-12-340-2207
Seal Inserter And Remover

123402207
2300232-992000.010.0: RNCC: 2 | RNVC: 2
2300232-992000.010.0: RNCC: 3 | RNVC: 2

15 Mar 1996

5120-12-191-8436
Socket Wrench Screwdriver Attachment

121918436
62108100: RNCC: 3 | RNVC: 2
54IC5: RNCC: 3 | RNVC: 2
6434-5: RNCC: 5 | RNVC: 2
643400-5: RNCC: 5 | RNVC: 2

9 Mar 1982

5120-12-324-9007
Hand Rivet Set

123249007
VN209-2: RNCC: 3 | RNVC: 2
MOV1-030615-2: RNCC: 5 | RNVC: 2

8 Apr 1991

5120-12-362-5040
Socket Head Screw Key

123625040
05022095001: RNCC: 3 | RNVC: 2
10767A-3/8: RNCC: 3 | RNVC: 2
410-380-58: RNCC: 3 | RNVC: 2
43570024: RNCC: 5 | RNVC: 2
00.42.26.55: RNCC: 5 | RNVC: 2
950PKL-3/8: RNCC: 5 | RNVC: 2
022095: RNCC: 5 | RNVC: 9

3 Mar 2004

5120-12-120-6577
Screwdriver Bit

121206577
TL5120-0082-540: RNCC: 2 | RNVC: 2
41-0,6X3,5: RNCC: 3 | RNVC: 2
600S4: RNCC: 5 | RNVC: 9
2485140004: RNCC: 5 | RNVC: 9
8503-0,6X3,5: RNCC: 5 | RNVC: 9
8503-4: RNCC: 5 | RNVC: 9
54750: RNCC: 5 | RNVC: 9
25-09-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-326-5474
Mechanical Puller Attachment

123265474
30215SUPROL2: RNCC: 3 | RNVC: 2
8470350: RNCC: 3 | RNVC: 2
8208588: RNCC: 5 | RNVC: 2
30215: RNCC: 5 | RNVC: 9
SUPER ROLLEX30215: RNCC: 5 | RNVC: 9

4 Oct 1991

5120-12-021-6796

5120-12-341-6445
Socket Wrench

123416445
28LR: RNCC: 3 | RNVC: 2
1400365: RNCC: 5 | RNVC: 2

9 Oct 1996

5120-12-090-1451

5120-12-364-2327
Mechanical Puller

123642327
F6550794: RNCC: 3 | RNVC: 2

2 Sep 2004

5120-12-311-0940
Driftpin

123110940
389589006100: RNCC: 3 | RNVC: 2

24 Jul 1987

5120-12-387-2616
Bearing And Bushing Inserter And Remover

123872616
200.074: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-12-123-5357

5120-12-199-5561
Screw Thread Insert Inserter

121995561
SRM 0610W: RNCC: 3 | RNVC: 2
SRM 0610W: RNCC: 5 | RNVC: 9

11 May 1984

5120-12-357-2276
Duese Reiniger

123572276
0986611163: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-363-8703
Bearing And Bushing Inserter And Remover

123638703
T670P5001103: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-330-6903
Marlinespike

123306903
975020 170: RNCC: 3 | RNVC: 2

28 Jan 1993

5120-12-322-4062
Drive Pin Punch

123224062
5M.2251.222.50: RNCC: 3 | RNVC: 2
5M.2251.222.50: RNCC: 3 | RNVC: 2

20 Aug 1990

5120-12-021-7946

5120-12-333-6284
Schluessel

123336284
4990020: RNCC: 3 | RNVC: 2

14 Jan 1994

5120-12-374-3892
Torque Wrench Adapter

123743892
58620009-TCS: RNCC: 3 | RNVC: 2

13 Feb 2008

5120-12-386-5531
Spanner Wrench

123865531
800153: RNCC: 3 | RNVC: 2

9 Sep 2011

5120-12-197-4716
Sp Montierwerkzeug

121974716
4982059: RNCC: 3 | RNVC: 2

25 Oct 1983

5120-12-123-5179

5120-12-377-0854
Bearing And Bushing Inserter And Remover

123770854
600800106: RNCC: 3 | RNVC: 2

10 Dec 2008

5120-12-328-6467
Bearing And Bushing Inserter

123286467
F30279919: RNCC: 3 | RNVC: 2
F361130279919: RNCC: 5 | RNVC: 2

11 Jun 1992

5120-12-343-2061
Handling Tool Arm

123432061
BHAF002: RNCC: 3 | RNVC: 2

20 May 1997

5120-12-092-1772

5120-12-383-1195
Socket Wrench Crowfoot Attachment

123831195
T291P0005102: RNCC: 3 | RNVC: 2

15 Sep 2010

5120-12-324-4464
Socket Head Screw Key

123244464
349311: RNCC: 3 | RNVC: 2

18 Feb 1991

5120-12-340-4730
Pliers

123404730
7891: RNCC: 3 | RNVC: 2
0052714: RNCC: 5 | RNVC: 2

19 Apr 1996

5120-12-023-1424

5120-12-385-2015
Screwdriver Bit Holder

123852015
27526: RNCC: 3 | RNVC: 2
9202510000: RNCC: 3 | RNVC: 2
4032248501649: RNCC: 5 | RNVC: 2

10 May 2011

5120-12-387-5214
Vise Jaw Caps

123875214
110160: RNCC: 3 | RNVC: 2

5 Jan 2012

5120-12-313-2492
Mechanical Puller Attachment

123132492
601589126303: RNCC: 3 | RNVC: 2

15 Mar 1988

5120-12-316-8585
Socket Wrench

123168585
0018147: RNCC: 3 | RNVC: 2
18147.02: RNCC: 5 | RNVC: 9

17 Feb 1989

5120-12-386-1360
Hand Tube Bender Set

123861360
2.4500: RNCC: 3 | RNVC: 2

10 Aug 2011

5120-12-318-2049
Ratchet Wrench

123182049
R3-3-VKT16: RNCC: 3 | RNVC: 2

20 Jun 1989

5120-12-301-0305
Bedienteil Hebel

123010305
1423-200.46(4): RNCC: 3 | RNVC: 2

19 Sep 1984

5120-12-190-3492
Open End Box Wrench

121903492
1949M8X9: RNCC: 3 | RNVC: 2
00.27.79.63: RNCC: 5 | RNVC: 2
130453: RNCC: 5 | RNVC: 2
91598849: RNCC: 5 | RNVC: 2
1304539: RNCC: 5 | RNVC: 2
1949M-8-9: RNCC: 5 | RNVC: 2

23 Nov 1981

5120-12-174-2340
Electronic Equipment Alignment Tool

121742340
1-154: RNCC: 3 | RNVC: 9

15 Jun 1978

5120-12-324-9141
Mechanical Puller

123249141
11054-1: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-12-041-2661

5120-12-158-1046
Dorn

121581046
SS2880-4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-174-5053
Open End Box Wrench

121745053
121-21X23: RNCC: 3 | RNVC: 2
00.27.96.80: RNCC: 5 | RNVC: 2
24-21X23: RNCC: 5 | RNVC: 9
41082123: RNCC: 5 | RNVC: 9

3 Jul 1978

5120-12-317-7359
Slip Joint Pliers

123177359
121/250 A3 SLU: RNCC: 3 | RNVC: 2
2615NB: RNCC: 3 | RNVC: 2
2615N-B: RNCC: 5 | RNVC: 2

5 May 1989

5120-12-149-7862
Socket Wrench Screwdriver Attachment

121497862
2360-264000.06.0: RNCC: 2 | RNVC: 2
5120700047: RNCC: 5 | RNVC: 2
2360-264000.06.0: RNCC: 5 | RNVC: 2
2360-264000-06-0: RNCC: 5 | RNVC: 2
2360-264000-06-0: RNCC: 5 | RNVC: 2
2360-264000.06.0: RNCC: 5 | RNVC: 2
2360-264000-04-0: RNCC: 5 | RNVC: 9
2360-264000-06-0: RNCC: 5 | RNVC: 9
2360-264000.04.0: RNCC: 5 | RNVC: 9
2360-264000.06.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-3761
Socket Wrench Crowfoot Attachment

121333761
FC16: RNCC: 3 | RNVC: 2
540A1-2: RNCC: 3 | RNVC: 2
52035-212: RNCC: 5 | RNVC: 2
52035212: RNCC: 5 | RNVC: 2
02500032: RNCC: 5 | RNVC: 2
AN8506-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-347-2689
Sealant Dispenser

123472689
117.16K: RNCC: 3 | RNVC: 2

18 Nov 1998

5120-12-189-1271
Open End Wrench

121891271
03325: RNCC: 3 | RNVC: 2

1 Sep 1981

5120-12-328-8416
Hand Hydraulic Jack

123288416
2300003: RNCC: 3 | RNVC: 2
601511: RNCC: 5 | RNVC: 2

26 Jun 1992

5120-12-370-4186
Retaining Ring Pliers

123704186
65474170: RNCC: 3 | RNVC: 2

6 Nov 2006

5120-12-319-3136
Montierhuelse

123193136
60582300: RNCC: 3 | RNVC: 2

21 Sep 1989

5120-12-177-5047
Spanner Wrench

121775047
700120W3: RNCC: 3 | RNVC: 2
700120W3: RNCC: 5 | RNVC: 9

5 Feb 1979

5120-12-355-3946
Mechanical Puller

123553946
5583171: RNCC: 3 | RNVC: 2
5555198: RNCC: 5 | RNVC: 9
(241)A42495583171: RNCC: 8 | RNVC: 2
5583171: RNCC: 8 | RNVC: 2

9 Nov 2001

5120-12-193-0667
Torque Wrench Adapter

121930667
TL5120-0086-440: RNCC: 2 | RNVC: 2
732/10 10: RNCC: 5 | RNVC: 9
7452-8 10: RNCC: 5 | RNVC: 9
21/DC-10: RNCC: 5 | RNVC: 9
6630C-10: RNCC: 5 | RNVC: 9
732-10-10: RNCC: 5 | RNVC: 9
6263110023: RNCC: 5 | RNVC: 9

16 Jun 1982

5120-12-140-1205
Socket Wrench Handle Bar

121401205
U00155: RNCC: 3 | RNVC: 2
U155: RNCC: 5 | RNVC: 2
U00155: RNCC: 5 | RNVC: 9
U155: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-9175
Bearing And Bushing Inserter And Remover Set

121719175
KV67: RNCC: 3 | RNVC: 2

30 Apr 1981

5120-12-123-5041

5120-12-358-6283
Box Wrench

123586283
DIN7444-30: RNCC: 2 | RNVC: 2
306-30: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-12-385-5559
Torque Screwdriver

123855559
775/25: RNCC: 3 | RNVC: 9
51050025: RNCC: 5 | RNVC: 9

15 Jun 2011

5120-12-308-6785
Brake Repair Pliers

123086785
135-13: RNCC: 3 | RNVC: 2
797: RNCC: 3 | RNVC: 2
5700002: RNCC: 3 | RNVC: 2
52740: RNCC: 5 | RNVC: 2
10613/1: RNCC: 5 | RNVC: 2
5753720003: RNCC: 5 | RNVC: 9

6 Nov 1986

5120-12-120-5143
Wood Mallet

121205143
DIN7461-140: RNCC: 2 | RNVC: 2
140DIN7461: RNCC: 5 | RNVC: 2
300-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-328-9067
Socket Wrench Socket

123289067
NO PRIMARY REF 12-328-9067: RNCC: 3 | RNVC: 2
DIN3124-52X20: RNCC: 5 | RNVC: 2
00872: RNCC: 5 | RNVC: 2
5075: RNCC: 5 | RNVC: 2
55D-52: RNCC: 5 | RNVC: 9

1 Jul 1992

5120-12-196-2495
Aligning Punch

121962495
35-940F040: RNCC: 3 | RNVC: 2

20 Jun 1983

5120-12-330-0651
Hand Hammer

123300651
1952-23: RNCC: 3 | RNVC: 2
H24102: RNCC: 5 | RNVC: 2
1952-23: RNCC: 5 | RNVC: 2

29 Oct 1992

5120-12-365-9188
Socket Wrench

123659188
T4840X 40: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-044-4925

5120-12-050-0667

5120-12-384-8696
Belt Awl

123848696
50.000.006: RNCC: 3 | RNVC: 2

6 Apr 2011

5120-12-325-8809
Seal Inserter

123258809
387589051500: RNCC: 3 | RNVC: 2

17 Jul 1991

5120-12-331-6050
Bearing And Bushing Inserter

123316050
80996040135: RNCC: 3 | RNVC: 2
80.99604.0135: RNCC: 5 | RNVC: 2
V1137: RNCC: 5 | RNVC: 2

27 May 1993

5120-12-320-7167
Schraubst Aufnahme

123207167
10214: RNCC: 3 | RNVC: 2
10214: RNCC: 5 | RNVC: 9

8 Feb 1990

5120-12-365-9181
Swivel Knob Jeweler's Screwdriver

123659181
T4881X 15: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-365-7812
Hand Terminal Crimping Tool

123657812
T3698: RNCC: 3 | RNVC: 2

2 Feb 2005

5120-12-369-9317
Crimping Tool Die

123699317
10 6013: RNCC: 3 | RNVC: 2

29 Aug 2006

5120-12-335-4084
Mechanical Puller

123354084
0851 6830: RNCC: 3 | RNVC: 2
8516830: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-349-4147
Socket Head Screw Key

123494147
2300211-991000.005.0: RNCC: 2 | RNVC: 2
2300211-991000.005.0: RNCC: 3 | RNVC: 2

11 Nov 1999

5120-12-301-5237
Hydraulic Jack Handle

123015237
304587.0: RNCC: 3 | RNVC: 2
0005833845: RNCC: 5 | RNVC: 2

20 Oct 1984

5120-12-312-0217
Spanner Wrench

123120217
01TC30901: RNCC: 3 | RNVC: 2

11 Nov 1987

5120-12-365-5406
Pliers

123655406
65015180-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-127-1691
Spanner Wrench

121271691
NO PRIMARY REF 12-127-1691: RNCC: 3 | RNVC: 2
107868: RNCC: 5 | RNVC: 9
4108S: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-392-6635
Torque Wrench Adapter

123926635
CTP40509G001: RNCC: 3 | RNVC: 2

26 Jun 2013

5120-12-367-1079
Bearing And Bushing Inserter

123671079
17229004-0: RNCC: 3 | RNVC: 2

11 Jul 2005

5120-12-333-4796
Mast Einsetzer

123334796
9108510242: RNCC: 3 | RNVC: 2

22 Dec 1993

5120-12-377-9077
Socket Wrench Extension

123779077
1225: RNCC: 3 | RNVC: 2
612950: RNCC: 5 | RNVC: 2
F30501569: RNCC: 5 | RNVC: 2
12250001: RNCC: 5 | RNVC: 2

24 Feb 2009

5120-12-141-9664
Mechanical Puller Attachment

121419664
521T0525: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-364-2923
Socket Head Screw Key

123642923
47481050-TCS: RNCC: 3 | RNVC: 2

8 Sep 2004

5120-12-368-8093
Combination Box And Open End Wrench

123688093
40101212-TCS: RNCC: 3 | RNVC: 2

24 Apr 2006

5120-12-334-1453
Bearing And Bushing Inserter

123341453
343 589 05 15 00: RNCC: 3 | RNVC: 2

25 Mar 1994

5120-12-146-2961
Spanner Wrench

121462961
4015890207: RNCC: 3 | RNVC: 2
401589020700: RNCC: 5 | RNVC: 2
4015890207: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-335-3470
Socket Wrench Socket

123353470
844601171: RNCC: 3 | RNVC: 2

11 Aug 1994

5120-12-359-6701
Eindrueckwerkzeugte

123596701
T622P3008110: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-185-3115
Ratsche

121853115
4830: RNCC: 3 | RNVC: 2

25 Sep 1980

5120-12-376-0275
Torque Wrench

123760275
62300040: RNCC: 3 | RNVC: 2

4 Aug 2008

5120-12-307-6220
Mechanical Puller

123076220
6651: RNCC: 3 | RNVC: 2
116589223300: RNCC: 5 | RNVC: 2

9 Jul 1986

5120-12-196-7621
Auswechselwe Griff

121967621
5801411-6601: RNCC: 3 | RNVC: 2

15 Aug 1983

5120-12-371-7158
C Clamp

123717158
6537020: RNCC: 3 | RNVC: 2

8 May 2007

5120-12-139-3126
Box Wrench

121393126
CH2293/5: RNCC: 3 | RNVC: 2
8205890403: RNCC: 5 | RNVC: 2
022M01000: RNCC: 5 | RNVC: 2
820589040300: RNCC: 5 | RNVC: 2
CH2293/5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-2971
V Eindrueck- Huelse

121462971
4015891261: RNCC: 3 | RNVC: 2
401589126100: RNCC: 5 | RNVC: 2
4015891261: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-2962
V Eindrueck- Huelse

121462962
4015890461: RNCC: 3 | RNVC: 2
401589046100: RNCC: 5 | RNVC: 2
4015890461: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-9055
Ausz Gewindestueck

121279055
WU75: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-336-5864
Montierdorn

123365864
0852 5008: RNCC: 3 | RNVC: 2
8525008: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-335-9627
Socket Wrench Socket

123359627
0851 4771: RNCC: 3 | RNVC: 2
8514771: RNCC: 5 | RNVC: 2

6 Oct 1994

5120-12-387-4293
Crimping Tool Die

123874293
D185: RNCC: 3 | RNVC: 2

14 Dec 2011

5120-12-336-5103
Bearing And Bushing Inserter

123365103
0852 4080: RNCC: 3 | RNVC: 2
8524080: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-188-4370
Face Spanner Wrench Socket

121884370
0706D101540/1: RNCC: 3 | RNVC: 2
0706D101540/1-B: RNCC: 5 | RNVC: 9
0706D101540/1-C: RNCC: 5 | RNVC: 9
MAGERD 5765: RNCC: 5 | RNVC: 9
0706D101540/1-D: RNCC: 5 | RNVC: 9

9 Jul 1981

5120-12-152-0720
Spanner Wrench

121520720
23111-7102.04: RNCC: 2 | RNVC: 2
23111-7102.04: RNCC: 3 | RNVC: 2
23111-7102-04: RNCC: 5 | RNVC: 9
23111-7102.04: RNCC: 5 | RNVC: 9
23111-7102-04: RNCC: 5 | RNVC: 9
23111-7102-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-173-2381
Machinist's Vise

121732381
51030020: RNCC: 3 | RNVC: 9
51030GR2: RNCC: 5 | RNVC: 9

29 Mar 1978

5120-12-191-1893
Dorn

121911893
1X56137168: RNCC: 3 | RNVC: 2

18 Jan 1982

5120-12-140-2225

5120-12-391-0562
Ejecti Guide Plate

123910562
F6781563: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-12-140-2927

5120-12-387-4981
Dispenser Proportioner Nozzle

123874981
51.000.077: RNCC: 3 | RNVC: 2
51.000.077: RNCC: 5 | RNVC: 2

3 Jan 2012

5120-12-358-7770
Montierdorn

123587770
80996060394: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-195-0961
Hole Sheet Metal Holder

121950961
0852 5484: RNCC: 3 | RNVC: 2
8525484: RNCC: 5 | RNVC: 2

12 Jan 1983

5120-12-354-8136
Hand Material Handling Hook

123548136
5400049-118911.00: RNCC: 3 | RNVC: 2

28 Aug 2001

5120-12-373-4533
Socket Head Screw Key

123734533
0613 140 45: RNCC: 3 | RNVC: 2

6 Nov 2007

5120-12-364-4734
Socket Wrench Crowfoot Attachment

123644734
02210020-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-334-9019
Hand Hammer

123349019
5135030060: RNCC: 3 | RNVC: 2
5135.03.0060: RNCC: 5 | RNVC: 2
207-7: RNCC: 5 | RNVC: 9

30 Jun 1994

5120-12-129-3776
Zwei Eindrueckdorn

121293776
3045890739: RNCC: 3 | RNVC: 2
304589073900: RNCC: 5 | RNVC: 2
304589073900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-6733
Socket Wrench

121476733
895-3-8: RNCC: 3 | RNVC: 2
201-3-8: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-140-1157

5120-12-185-4700
Socket Head Screw Key

121854700
05022905001: RNCC: 3 | RNVC: 2
352-5/32: RNCC: 5 | RNVC: 2
952-5-32: RNCC: 5 | RNVC: 9
22905: RNCC: 5 | RNVC: 9

9 Oct 1980

5120-12-168-6685
Screwdriver Bit

121686685
7021138050901: RNCC: 3 | RNVC: 2
702113-8050.901: RNCC: 5 | RNVC: 2

28 Mar 1977

5120-12-120-9681
Socket Wrench Crowfoot Attachment

121209681
NO PRIMARY REF 12-120-9681: RNCC: 3 | RNVC: 2
1951Z1-1-2: RNCC: 5 | RNVC: 9
105678: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-7583
Ratchet Wrench

123887583
522.2430: RNCC: 3 | RNVC: 2

19 Apr 2012

5120-12-361-5235
Retaining Ring Pliers

123615235
1846B-1,6: RNCC: 3 | RNVC: 2

13 Oct 2003

5120-12-364-4638
Mechanical Puller

123644638
200 890 020: RNCC: 3 | RNVC: 2

29 Sep 2004

5120-12-172-6373
Montagering

121726373
1X56103757: RNCC: 3 | RNVC: 2
V103757: RNCC: 5 | RNVC: 2
0535414: RNCC: 5 | RNVC: 2
535414: RNCC: 5 | RNVC: 9

31 Jan 1978

5120-12-150-0224
Schluessel

121500224
510255: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-389-8126
Mechanical Puller

123898126
KV1055: RNCC: 3 | RNVC: 2

27 Aug 2012

5120-12-139-3073
Zwischenstueck

121393073
8205894763: RNCC: 3 | RNVC: 2
016M04200: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-385-4874
Drive Pin Punch

123854874
451 012 0: RNCC: 3 | RNVC: 2

8 Jun 2011

5120-12-390-5984
Bearing And Bushing Inserter

123905984
2018810-4.1A: RNCC: 3 | RNVC: 2
2018810-4.1A: RNCC: 5 | RNVC: 2

27 Nov 2012

5120-12-375-2302
Screwdriver Bit

123752302
05002923001: RNCC: 3 | RNVC: 2
82-PH2-1X6: RNCC: 5 | RNVC: 2

6 May 2008

5120-12-316-3963
Socket Head Screw Key

123163963
530382-0040.000: RNCC: 2 | RNVC: 2
530382-0040.000: RNCC: 3 | RNVC: 2
530382-0040.000: RNCC: 5 | RNVC: 9

13 Jan 1989

5120-12-173-8750
Socket Wrench Crowfoot Attachment

121738750
NO PRIMARY REF 12-173-8750: RNCC: 3 | RNVC: 2
131493: RNCC: 5 | RNVC: 9
1950M9: RNCC: 5 | RNVC: 9

17 May 1978

5120-12-142-0291
Torque Wrench

121420291
TER250FU: RNCC: 3 | RNVC: 2
8176N: RNCC: 5 | RNVC: 9
131251: RNCC: 5 | RNVC: 9
161071: RNCC: 5 | RNVC: 9
8171: RNCC: 5 | RNVC: 9
5120-40522: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-339-9707
Eindrueckwerkzeug

123399707
5078412: RNCC: 3 | RNVC: 2
698-469-0000: RNCC: 5 | RNVC: 2

7 Feb 1996

5120-12-387-7082
Seal Inserter

123877082
F6554716: RNCC: 3 | RNVC: 2

26 Jan 2012

5120-12-312-3220
Bearing And Bushing Remover

123123220
105-45041W12: RNCC: 3 | RNVC: 2

15 Dec 1987

5120-12-362-1092
Lifting Pneumatic Bag

123621092
3500 0012 00: RNCC: 3 | RNVC: 2

12 Jan 2004

5120-12-368-6866
Socket Wrench Screwdriver Attachment

123686866
3244-TX40: RNCC: 3 | RNVC: 2
00.47.68.15: RNCC: 5 | RNVC: 2

6 Apr 2006

5120-12-023-1406

5120-12-126-3018
Wrench Kit

121263018
NO PRIMARY REF 12-126-3018: RNCC: 3 | RNVC: 2
107134: RNCC: 5 | RNVC: 9
3280Z: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-173-8329
Ambosz

121738329
622A102-13-15: RNCC: 3 | RNVC: 9

16 May 1978

5120-12-166-1967
Schlagstueck

121661967
8524217: RNCC: 3 | RNVC: 2
8207-637: RNCC: 5 | RNVC: 2

12 Aug 1976

5120-12-308-8680
Spanner Wrench

123088680
870/000-75: RNCC: 3 | RNVC: 2

24 Nov 1986

5120-12-177-2793
Mechanical Puller

121772793
2300002-269080.001: RNCC: 2 | RNVC: 2
2300002-269080.001: RNCC: 3 | RNVC: 2
2300002-269080-001: RNCC: 5 | RNVC: 9
2300002-269080.001: RNCC: 5 | RNVC: 9

24 Jan 1979

5120-12-191-9350
Schlagbuchse

121919350
NO PRIMARY REF 12-191-9350: RNCC: 3 | RNVC: 2
416380: RNCC: 5 | RNVC: 9

16 Mar 1982

5120-12-123-5395
Socket Wrench

121235395
NO PRIMARY REF 12-123-5395: RNCC: 3 | RNVC: 2
26R17X22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-383-0955
Hand Hammer

123830955
T530P0001102: RNCC: 3 | RNVC: 2

14 Sep 2010

5120-12-127-8793
Reifelholz

121278793
313511: RNCC: 3 | RNVC: 2
724: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-311-0631
Seal Inserter

123110631
624589001500: RNCC: 3 | RNVC: 2

22 Jul 1987

5120-12-338-2594
Hand Hydraulic Jack

123382594
4615800118: RNCC: 3 | RNVC: 2

12 Jun 1995

5120-12-129-9423
Mehrzw Stielhalter

121299423
510022-0-07: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-384-0022
Mechanic's Bench Block

123840022
F6554300: RNCC: 3 | RNVC: 2

10 Jan 2011

5120-12-352-6887
Torque Wrench

123526887
7044C: RNCC: 3 | RNVC: 9

6 Dec 2000

5120-12-140-1154

5120-12-326-0937
Screwdriver Bit

123260937
8808LG-8: RNCC: 3 | RNVC: 2

7 Aug 1991

5120-12-198-6039
Socket Wrench

121986039
E42P00-0309: RNCC: 3 | RNVC: 2

14 Feb 1984

5120-12-323-8298
Offset Screwdriver

123238298
740-1: RNCC: 3 | RNVC: 2

21 Dec 1990

5120-12-183-9681
Socket Wrench Socket

121839681
A6700DM-9: RNCC: 3 | RNVC: 2
6700DM9: RNCC: 5 | RNVC: 9

7 Jun 1980

5120-12-389-0027
Mechanical Puller Attachment

123890027
80996010235: RNCC: 3 | RNVC: 2
80.99601-0235: RNCC: 5 | RNVC: 2

15 May 2012

5120-12-370-9056
Bearing And Bushing Inserter And Remover

123709056
80996170195: RNCC: 3 | RNVC: 2
80.99617-0195: RNCC: 5 | RNVC: 2

15 Jan 2007

5120-12-188-4149
Gewindedorn

121884149
053095: RNCC: 3 | RNVC: 2
053095F: RNCC: 5 | RNVC: 2
WZ-58: RNCC: 5 | RNVC: 2

7 Jul 1981

5120-12-341-1603
Hand Material Handling Hook

123411603
RAM-7211-07: RNCC: 3 | RNVC: 2

2 Aug 1996

5120-12-130-8003
Hand Screw Starter

121308003
C20407-B1-A4: RNCC: 3 | RNVC: 2
C20407B1A4: RNCC: 5 | RNVC: 2
TFS70-00394: RNCC: 5 | RNVC: 9
TFS70-03949: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-307-1626
Screwdriver Bit

123071626
TL5120-0132-G9: RNCC: 2 | RNVC: 2
3245-TX60: RNCC: 3 | RNVC: 2
ITX19-T60: RNCC: 3 | RNVC: 2
992-T60: RNCC: 3 | RNVC: 2
54TX-T60: RNCC: 3 | RNVC: 2
11726: RNCC: 5 | RNVC: 2
00.50.28.81: RNCC: 5 | RNVC: 2
03100060: RNCC: 5 | RNVC: 2
INXT19-60: RNCC: 5 | RNVC: 9
2487130009: RNCC: 5 | RNVC: 9

15 May 1986

5120-12-092-2263

5120-12-393-8816
Socket Head Screw Key

123938816
T17550: RNCC: 3 | RNVC: 2

17 Oct 2013

5120-12-357-7344
Ge Montierwerkzeug

123577344
F30276548: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-329-4564
Socket Wrench Socket

123294564
55-28: RNCC: 3 | RNVC: 2
58918280: RNCC: 3 | RNVC: 2
52565280: RNCC: 5 | RNVC: 9

21 Aug 1992

5120-12-306-6437
Open End Wrench

123066437
5-801-0321: RNCC: 3 | RNVC: 2

18 Mar 1986

5120-12-140-5313
Schluessel

121405313
15091-08200W1: RNCC: 3 | RNVC: 2
15091-08200W1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-362-2169
Hydrau Grundplatte

123622169
160-88479: RNCC: 3 | RNVC: 2
00706-006-000: RNCC: 5 | RNVC: 2

26 Jan 2004

5120-12-311-1328
Lager- Und Einsatz

123111328
406589104300: RNCC: 3 | RNVC: 2

29 Jul 1987

5120-12-365-1138
Bearing And Bushing Inserter

123651138
H14831003: RNCC: 3 | RNVC: 2

30 Nov 2004

5120-12-357-7357
Mechanical Puller

123577357
F30276380: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-316-2837
Mecha Aufnahmeteil

123162837
105-31762W2.01: RNCC: 3 | RNVC: 2

6 Jan 1989

5120-12-023-1442

5120-12-358-7778
Bearing And Bushing Inserter

123587778
80996170161: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-355-4421
Box Wrench

123554421
XLE1820: RNCC: 3 | RNVC: 2
08.06006.1415: RNCC: 5 | RNVC: 2
08.06007.1516: RNCC: 5 | RNVC: 2

15 Nov 2001

5120-12-314-1016
Socket Wrench Socket

123141016
41-1180-2200.000.0: RNCC: 2 | RNVC: 2
41-1180.2200.000.0: RNCC: 3 | RNVC: 2
5120123141016: RNCC: 5 | RNVC: 2
41-1180-2200.000.0: RNCC: 5 | RNVC: 9

7 Jun 1988

5120-12-141-9793
Open End Wrench

121419793
571A203B1 5-8IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-326-0570
Gear Inserter

123260570
317589001400: RNCC: 3 | RNVC: 2

2 Aug 1991

5120-12-172-9535
Dorn

121729535
1X56122388: RNCC: 3 | RNVC: 2

6 Mar 1978

5120-12-133-3433
Spanner Wrench

121333433
499201-3126.000: RNCC: 3 | RNVC: 2
499201-3126.000: RNCC: 5 | RNVC: 9
499201-3126: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-2919
Flat Tip Screwdriver

123642919
48201035-TCS: RNCC: 3 | RNVC: 2

8 Sep 2004

5120-12-364-1730
Torque Wrench Adapter

123641730
F30379124: RNCC: 3 | RNVC: 2
F30378124: RNCC: 5 | RNVC: 9

27 Aug 2004

5120-12-123-5674
Socket Wrench Socket

121235674
NO PRIMARY REF 12-123-5674: RNCC: 3 | RNVC: 2
109754: RNCC: 5 | RNVC: 9
7800DZ29-32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-362-4590
Combination Box And Open End Wrench

123624590
54.0084.960.45: RNCC: 3 | RNVC: 2
13-11: RNCC: 5 | RNVC: 2

26 Feb 2004

5120-12-344-6622
Socket Head Screw Key

123446622
4900390-3110-003: RNCC: 2 | RNVC: 2

25 Nov 1997

5120-12-163-6628
Spanner Wrench

121636628
26-21C1350G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-172-1756
Socket Head Screw Key

121721756
161-20: RNCC: 3 | RNVC: 2
2092-20: RNCC: 5 | RNVC: 9
57411: RNCC: 5 | RNVC: 9

27 Dec 1977

5120-12-155-9104
Spanner Wrench

121559104
512202-9014.000: RNCC: 3 | RNVC: 2
512202-9014: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-383-8305
Adjustable Wrench

123838305
0551900C: RNCC: 3 | RNVC: 2

10 Dec 2010

5120-12-370-7591
Hand Nail Puller

123707591
T40010: RNCC: 3 | RNVC: 2

18 Dec 2006

5120-12-183-6487
Hand Hammer

121836487
613D001: RNCC: 3 | RNVC: 9

6 May 1980

5120-12-126-5443

5120-12-341-3952
Eindrueckwerkzeug

123413952
287.68.430: RNCC: 3 | RNVC: 9

30 Aug 1996

5120-12-364-6754
Slip Joint Pliers

123646754
65706250-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-345-6836
Socket Head Screw Key

123456836
1419917: RNCC: 3 | RNVC: 2

15 Apr 1998

5120-12-041-2573

5120-12-394-6136
Open End Wrench

123946136
13624: RNCC: 3 | RNVC: 2

18 Dec 2013

5120-12-382-1869
Open End Wrench

123821869
40.50.71: RNCC: 3 | RNVC: 2

19 May 2010

5120-12-312-2563
Cross Tip Screwdriver

123122563
05017056001: RNCC: 3 | RNVC: 2
223-4X200: RNCC: 3 | RNVC: 2
17056: RNCC: 3 | RNVC: 9
918SPZ-4: RNCC: 5 | RNVC: 2
66880-4: RNCC: 5 | RNVC: 2
918S-4: RNCC: 5 | RNVC: 9

9 Dec 1987

5120-12-324-0729
Socket Wrench Screwdriver Attachment

123240729
A6709M-2: RNCC: 3 | RNVC: 2
175366: RNCC: 5 | RNVC: 2

18 Jan 1991

5120-12-318-3770
Spanner Wrench

123183770
758-5: RNCC: 3 | RNVC: 2

7 Jul 1989

5120-12-301-9359
Socket Wrench

123019359
E42P00-0303: RNCC: 3 | RNVC: 2

17 Nov 1984

5120-12-339-5007
Socket Head Screw Key

123395007
154 01 019: RNCC: 3 | RNVC: 2
T4431 8: RNCC: 3 | RNVC: 2
334-8,0X150: RNCC: 3 | RNVC: 2
15401019: RNCC: 5 | RNVC: 9

28 Nov 1995

5120-12-178-2001
Montagewerkzeug

121782001
V22-983-600000: RNCC: 3 | RNVC: 2

26 Mar 1979

5120-12-333-5660
Seal Inserter

123335660
1841901: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-023-1416

5120-12-151-6719
Open End Wrench

121516719
31-353-015-3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-702-9027
Schluessel

127029027
4709200-20-1: RNCC: 3 | RNVC: 2

5 Sep 1996

5120-12-316-3062
Socket Head Screw Key

123163062
42901325: RNCC: 3 | RNVC: 2
LN-2,5MMBP: RNCC: 5 | RNVC: 2

9 Jan 1989

5120-12-310-1325
Socket Wrench Set

123101325
X377: RNCC: 2 | RNVC: 9
W34-1-20: RNCC: 5 | RNVC: 9
W34-2-20: RNCC: 5 | RNVC: 9
5120-00366: RNCC: 6 | RNVC: 9

9 Apr 1987

5120-12-330-9183
Torque Wrench

123309183
74Z-0-0-45: RNCC: 3 | RNVC: 2
88-2009: RNCC: 5 | RNVC: 9

25 Feb 1993

5120-12-131-4971
Socket Wrench

121314971
NO PRIMARY REF 12-131-4971: RNCC: 3 | RNVC: 2
129799: RNCC: 5 | RNVC: 9
1945UM4-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5051
Open End Wrench

121235051
5M8936-220-92: RNCC: 3 | RNVC: 2
5M.8936.220.92: RNCC: 5 | RNVC: 2
ELA10543-10: RNCC: 5 | RNVC: 9
1931NM4X6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-374-3617
Socket Wrench Socket

123743617
03420038-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-320-3278
Socket Wrench Extension

123203278
516: RNCC: 3 | RNVC: 2
1512A: RNCC: 5 | RNVC: 9

3 Jan 1990

5120-12-167-6905

5120-12-139-3079

5120-12-366-5460
Pedal Adjustment Tool Compressor

123665460
KL-9002-100: RNCC: 3 | RNVC: 2

9 May 2005

5120-12-337-1486
Montierdorn

123371486
8523068.002: RNCC: 3 | RNVC: 2
0852 3068.002: RNCC: 5 | RNVC: 2

25 Jan 1995

5120-12-147-1860
Dorn

121471860
3125890215: RNCC: 3 | RNVC: 2
312589021500: RNCC: 5 | RNVC: 2
312589021500: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-350-9171
Mechanical Puller

123509171
4425890033/00: RNCC: 3 | RNVC: 2

5 Jun 2000

5120-12-127-2754
Tellerr Abziehring

121272754
83.09143-0018: RNCC: 3 | RNVC: 2
83091430018: RNCC: 3 | RNVC: 2
WL52A: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-023-0354

5120-12-349-4014
Montage- Hebel

123494014
0986611028: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-357-7359
Piston Ring Expander

123577359
8735890037: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-023-1480

5120-12-377-1155
Quick Adjusting Screw Clamp

123771155
SGL60M: RNCC: 3 | RNVC: 2

11 Dec 2008

5120-12-364-6808
Socket Wrench Socket

123646808
02020012-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-137-7877
Open End Wrench

121377877
H89999-D54: RNCC: 3 | RNVC: 2
H89999D54: RNCC: 3 | RNVC: 2
FGVERS164-38: RNCC: 3 | RNVC: 2
10579: RNCC: 5 | RNVC: 2
10579: RNCC: 5 | RNVC: 9
20579: RNCC: 5 | RNVC: 9
H89999-D54: RNCC: 5 | RNVC: 9
H89999D54: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-178-3287
Open End Wrench

121783287
NO PRIMARY REF 12-178-3287: RNCC: 3 | RNVC: 2
12E3BA: RNCC: 5 | RNVC: 9
609838: RNCC: 5 | RNVC: 9
8M3BA: RNCC: 5 | RNVC: 9
40769696: RNCC: 5 | RNVC: 9

12 Apr 1979

5120-12-133-3962
Screwdriver Bit

121333962
NO PRIMARY REF 12-133-3962: RNCC: 3 | RNVC: 2
6988M3: RNCC: 5 | RNVC: 9
6988M5-2X0-75: RNCC: 5 | RNVC: 9
109045: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-372-2407
Bearing And Bushing Remover

123722407
105-45041W11: RNCC: 3 | RNVC: 2

29 Jun 2007

5120-12-389-4687
Bearing And Bushing Inserter

123894687
F0096597: RNCC: 3 | RNVC: 2

11 Jul 2012

5120-12-301-8830
Spanner Wrench

123018830
R-4.14437-11: RNCC: 3 | RNVC: 2

15 Nov 1984

5120-12-319-6370
Lamp Extractor

123196370
00-004.0: RNCC: 3 | RNVC: 2
3SB1902-2AD: RNCC: 3 | RNVC: 2
700.004.0: RNCC: 5 | RNVC: 2
18.104.849-51: RNCC: 5 | RNVC: 2

19 Oct 1989

5120-12-388-9325
M Indentation Tool

123889325
80996066080: RNCC: 3 | RNVC: 2
80.99606-6080: RNCC: 5 | RNVC: 2

8 May 2012

5120-12-300-7992
Zentrier- Ring

123007992
403589001400: RNCC: 3 | RNVC: 2
0963865: RNCC: 5 | RNVC: 2
0963865: RNCC: 5 | RNVC: 9

31 Aug 1984

5120-12-143-9067
Socket Wrench

121439067
0015892309: RNCC: 3 | RNVC: 2
001589230900: RNCC: 5 | RNVC: 2
0015892309: RNCC: 5 | RNVC: 2
0015892309: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-372-0080
Screw Extractor

123720080
701740: RNCC: 3 | RNVC: 2

11 Jun 2007

5120-12-367-0151
Schluessel

123670151
0000LLCA57160: RNCC: 3 | RNVC: 2

29 Jun 2005

5120-12-044-4922

5120-12-148-2503
Aufsteck- Huelse

121482503
4891023: RNCC: 3 | RNVC: 2
83091400018: RNCC: 5 | RNVC: 2
2810017: RNCC: 5 | RNVC: 2
02965963: RNCC: 5 | RNVC: 2
83.09140-0018: RNCC: 5 | RNVC: 9
2810-017: RNCC: 5 | RNVC: 9
2965963ED5165-86: RNCC: 5 | RNVC: 9
489102: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-3746
Pliers

123883746
35 52 145: RNCC: 3 | RNVC: 2
4003773039389: RNCC: 5 | RNVC: 2

15 Mar 2012

5120-12-368-8425
Socket Wrench Extension

123688425
770-S5: RNCC: 3 | RNVC: 2
00.52.08.67: RNCC: 5 | RNVC: 2

27 Apr 2006

5120-12-350-2560
Bl Ausbeulwerkzeug

123502560
156: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-373-2228
Screwdriver Bit Set And Handle

123732228
05056656001: RNCC: 3 | RNVC: 2

10 Oct 2007

5120-12-382-5722
Socket Wrench Socket

123825722
02110013-TCS: RNCC: 3 | RNVC: 2

12 Jul 2010

5120-12-184-7713
Einbauwerkzeug

121847713
0851 2164: RNCC: 3 | RNVC: 2
8512164: RNCC: 5 | RNVC: 2

16 Aug 1980

5120-12-363-2381
Dreh Haltewerkzeug

123632381
F70144375: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-381-3948
Flat Tip Screwdriver

123813948
05018270001: RNCC: 3 | RNVC: 2
932A-1,6X10,0X175: RNCC: 5 | RNVC: 2
260.001-060: RNCC: 5 | RNVC: 2

9 Feb 2010

5120-12-309-8157
Spanner Wrench

123098157
001-218.000-000W26: RNCC: 2 | RNVC: 2
001-218.000-000W26: RNCC: 3 | RNVC: 2

6 Mar 1987

5120-12-351-3050
Seal Inserter

123513050
9256844000: RNCC: 3 | RNVC: 2

11 Jul 2000

5120-12-175-2369
Rohr

121752369
09010483: RNCC: 3 | RNVC: 2

4 Sep 1978

5120-12-330-3465
Mechanical Puller Adapter

123303465
2653-990990.00: RNCC: 2 | RNVC: 2
2653-990990.00: RNCC: 3 | RNVC: 2

4 Dec 1992

5120-12-326-5290
Bearing And Bushing Inserter

123265290
4900401: RNCC: 3 | RNVC: 2

1 Oct 1991

5120-12-311-0626
Seal Inserter

123110626
363589061500: RNCC: 3 | RNVC: 2

22 Jul 1987

5120-12-161-8903

5120-12-168-6697

5120-12-345-5835
Socket Wrench Crowfoot Attachment

123455835
540A-1: RNCC: 3 | RNVC: 2
02 50 00 48: RNCC: 5 | RNVC: 2

2 Apr 1998

5120-12-177-5779
Box Wrench

121775779
UHD303-42: RNCC: 3 | RNVC: 2
UHD303-42: RNCC: 5 | RNVC: 9

7 Feb 1979

5120-12-332-9074
Socket Wrench Screwdriver Attachment

123329074
TL5120-0102-060: RNCC: 2 | RNVC: 2
49-3: RNCC: 3 | RNVC: 2
02050003: RNCC: 5 | RNVC: 2

4 Oct 1993

5120-12-169-2818
Einbauwerkzeug

121692818
01500103000: RNCC: 3 | RNVC: 2

3 May 1977

5120-12-337-1482
Montierhuelse

123371482
0852 1364: RNCC: 3 | RNVC: 2
8521364: RNCC: 5 | RNVC: 2

25 Jan 1995

5120-12-150-6257
Spanner Wrench

121506257
510274: RNCC: 2 | RNVC: 2
JB153: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-310-5392
Bearing And Bushing Inserter

123105392
80996040050: RNCC: 3 | RNVC: 2
80.99604.0050: RNCC: 5 | RNVC: 2

29 May 1987

5120-12-094-0363

5120-12-363-9549
Bearing And Bushing Inserter

123639549
T671P5002111: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-384-7806
Open End Wrench

123847806
F30017559: RNCC: 3 | RNVC: 2

28 Mar 2011

5120-12-193-0252
Socket Wrench Handle Sliding T-Head

121930252
NM 301-53.52: RNCC: 3 | RNVC: 2
NM301-53.52: RNCC: 5 | RNVC: 2
NM301-53-52: RNCC: 5 | RNVC: 2
NM 301-53.52: RNCC: 5 | RNVC: 9
NM301-53-52: RNCC: 5 | RNVC: 9
NM301-53.52: RNCC: 5 | RNVC: 9

15 Jun 1982

5120-12-196-6970
Spanner Wrench

121966970
4900059-725110.000.0: RNCC: 2 | RNVC: 2
4900059-725110.000.0: RNCC: 3 | RNVC: 2
4900059-725110-000-0: RNCC: 5 | RNVC: 2
4900059-725110.000.0: RNCC: 5 | RNVC: 2

3 Aug 1983

5120-12-345-3254
Seal Inserter

123453254
F30376821: RNCC: 3 | RNVC: 2

3 Mar 1998

5120-12-373-9214
Hand Terminal Crimping Tool

123739214
101872: RNCC: 3 | RNVC: 2

19 Dec 2007

5120-12-360-0240
Electrical Contact Remover

123600240
VG95236T04BC002: RNCC: 2 | RNVC: 2

28 Mar 2003

5120-12-010-9646

5120-12-381-9011
Socket Head Screw Key

123819011
0250100S: RNCC: 3 | RNVC: 2

15 Apr 2010

5120-12-332-0593
Socket Wrench Socket

123320593
00748: RNCC: 3 | RNVC: 2

20 Jul 1993

5120-12-172-8006
Ratchet Wrench

121728006
R1618SA: RNCC: 3 | RNVC: 2
R1618S: RNCC: 5 | RNVC: 2

20 Feb 1978

5120-12-185-7860
Lamp Extractor

121857860
CU405433R: RNCC: 3 | RNVC: 2
CU 405 433 -R: RNCC: 5 | RNVC: 2
CU405433R: RNCC: 5 | RNVC: 2
CU 405 433 -R: RNCC: 5 | RNVC: 2

30 Oct 1980

5120-12-372-9893
Hand Pipe And Sewer Auger

123729893
62235: RNCC: 3 | RNVC: 2
C-2: RNCC: 5 | RNVC: 2

13 Sep 2007

5120-12-134-2666
Socket Wrench Socket

121342666
VM43688: RNCC: 3 | RNVC: 2
027M02900: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-175-7607
Open End Wrench

121757607
DIN895-13X17: RNCC: 2 | RNVC: 2
895-13X17: RNCC: 3 | RNVC: 2
895 13X17: RNCC: 3 | RNVC: 2
413311013000: RNCC: 5 | RNVC: 2
0705150314: RNCC: 5 | RNVC: 2
895-13X17: RNCC: 5 | RNVC: 2
658596: RNCC: 5 | RNVC: 2
13X17DIN895: RNCC: 5 | RNVC: 2
W008154004: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-12-372-0663
Mechanical Puller

123720663
0004804-801: RNCC: 3 | RNVC: 2

14 Jun 2007

5120-12-384-3196
Mechanical Puller Adapter

123843196
F6781600: RNCC: 3 | RNVC: 2

11 Feb 2011

5120-12-091-2909

5120-12-306-0072
Drain Plug Wrench

123060072
3701: RNCC: 3 | RNVC: 2
5719640002: RNCC: 5 | RNVC: 2

20 Jan 1986

5120-12-345-3532
Spanner Wrench

123453532
009-017.410-033W5: RNCC: 3 | RNVC: 2

4 Mar 1998

5120-12-342-2147
Boerdelwer Einsatz

123422147
15419901: RNCC: 3 | RNVC: 2

7 Jan 1997

5120-12-090-5468

5120-12-351-9561
Socket Head Screw Key

123519561
ISO2936-1,5: RNCC: 2 | RNVC: 2
10139598: RNCC: 5 | RNVC: 2
5200.102.080.062: RNCC: 5 | RNVC: 2

20 Sep 2000

5120-12-382-9598
Ball Joint Removal Tool

123829598
8030810: RNCC: 3 | RNVC: 2
1.73/1: RNCC: 5 | RNVC: 2
4036976106039: RNCC: 5 | RNVC: 2
8030810: RNCC: 5 | RNVC: 2
1.73/1: RNCC: 5 | RNVC: 2
4036976106039: RNCC: 5 | RNVC: 2

27 Aug 2010

5120-12-305-1344
Driftpin

123051344
01TC34594: RNCC: 3 | RNVC: 2

1 Oct 1985

5120-12-389-4590
Torque Wrench

123894590
F30520705: RNCC: 3 | RNVC: 2

10 Jul 2012

5120-12-180-2255
Socket Wrench Crowfoot Attachment

121802255
320-991105: RNCC: 3 | RNVC: 2

30 Aug 1979

5120-12-174-6523
Mechanical Jack Handle

121746523
0005831545: RNCC: 3 | RNVC: 2

17 Jul 1978

5120-12-183-0985
Oese

121830985
4190435: RNCC: 3 | RNVC: 2

20 Mar 1980

5120-12-363-4428
Seal Inserter

123634428
142820: RNCC: 3 | RNVC: 2
142920: RNCC: 5 | RNVC: 9

16 Jun 2004

5120-12-120-6686

5120-12-336-7543
Screw Thread Insert Inserter

123367543
01500170700: RNCC: 3 | RNVC: 2

20 Dec 1994

5120-12-185-7582
Schluessel

121857582
C40407-A15-A1: RNCC: 3 | RNVC: 2
C40407A15A1: RNCC: 5 | RNVC: 2
RELWZ15A: RNCC: 5 | RNVC: 2

30 Oct 1980

5120-12-338-0782
Hand Beading Tool

123380782
WD28675: RNCC: 3 | RNVC: 2

18 May 1995

5120-12-363-8856
Bearing And Bushing Inserter

123638856
T670P5001221: RNCC: 3 | RNVC: 2

3 Aug 2004

5120-12-371-2886
Cross Tip Screwdriver

123712886
T4723 015: RNCC: 3 | RNVC: 2

9 Mar 2007

5120-12-364-4731
Torque Wrench Adapter

123644731
02181013-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-392-4626
Stud Inserter And Remover

123924626
53-16: RNCC: 3 | RNVC: 2
4021176388774: RNCC: 5 | RNVC: 2

11 Jun 2013

5120-12-368-9961
Hose Strap Band Clamping Tool

123689961
798-15A: RNCC: 3 | RNVC: 2

11 May 2006

5120-12-147-4287
Flat Tip Screwdriver

121474287
C30407-A169-A2: RNCC: 3 | RNVC: 2
FGWZ169B: RNCC: 5 | RNVC: 2
C30407A169A2: RNCC: 5 | RNVC: 2
C30407A169A2: RNCC: 5 | RNVC: 9
FGWZ169B: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-310-1107
Socket Wrench Socket Set

123101107
IN19PM: RNCC: 3 | RNVC: 2
IN19-PM: RNCC: 5 | RNVC: 2

8 Apr 1987

5120-12-175-8967
Spanner Wrench

121758967
750.00-01-00-01-090: RNCC: 3 | RNVC: 2
750-00-010001090: RNCC: 5 | RNVC: 2

25 Oct 1978

5120-12-172-8181
Seal Inserter

121728181
VG95211-ML-121728181: RNCC: 2 | RNVC: 2
1X56 103 765: RNCC: 3 | RNVC: 2
1X56-103-765: RNCC: 5 | RNVC: 2
1X56103765: RNCC: 5 | RNVC: 9

22 Feb 1978

5120-12-151-8409
Dru Montageschieber

121518409
C20407-B1-A9: RNCC: 3 | RNVC: 2
C20407B1A9: RNCC: 5 | RNVC: 2
C20407B1A9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-336-2515
Weapons Handling Bar

123362515
1000089-99140: RNCC: 2 | RNVC: 2
1000089-99140: RNCC: 3 | RNVC: 2

4 Nov 1994

5120-12-365-7607
Open End Wrench

123657607
40031719-TCS: RNCC: 3 | RNVC: 2

1 Feb 2005

5120-12-374-4023
Pull And Press Tool

123744023
541589023300: RNCC: 3 | RNVC: 2

14 Feb 2008

5120-12-348-7349
Valve Tappet Adjusting Tool

123487349
F30371153: RNCC: 3 | RNVC: 2

11 Aug 1999

5120-12-369-0177
Drive Pin Punch

123690177
450 045 0: RNCC: 3 | RNVC: 2
00.08.15.39: RNCC: 5 | RNVC: 2

15 May 2006

5120-12-313-8299
Combination Box And Open End Wrench Set

123138299
1292198KM: RNCC: 3 | RNVC: 2

10 May 1988

5120-12-342-1899
Drive Pin Punch

123421899
1300835-000-02: RNCC: 2 | RNVC: 2
1300835-000-02: RNCC: 3 | RNVC: 2

24 Dec 1996

5120-12-391-0821
Dapping Punch

123910821
F30378645: RNCC: 3 | RNVC: 2

23 Jan 2013

5120-12-330-4456
Screw Thread Insert Tang Breakoff Tool

123304456
01586080000: RNCC: 3 | RNVC: 2

16 Dec 1992

5120-12-332-8434
Spanner Wrench

123328434
8007361: RNCC: 3 | RNVC: 2

27 Sep 1993

5120-12-321-1057
Pliers

123211057
705116: RNCC: 3 | RNVC: 2
411: RNCC: 5 | RNVC: 2
F300 0T 001 5137: RNCC: 6 | RNVC: 9

27 Mar 1990

5120-12-332-6041
Spring Inserter And Remover

123326041
3113A: RNCC: 3 | RNVC: 2

26 Aug 1993

5120-12-368-8056
Socket Wrench Socket

123688056
771-S26: RNCC: 3 | RNVC: 2
00.51.71.30: RNCC: 5 | RNVC: 2

24 Apr 2006

5120-12-149-6898

5120-12-120-6664
Socket Wrench Socket

121206664
A6700DZ-11/32: RNCC: 3 | RNVC: 2
40AD-11/32: RNCC: 3 | RNVC: 2
133034: RNCC: 5 | RNVC: 2
181984: RNCC: 5 | RNVC: 2
01530022: RNCC: 5 | RNVC: 2
6700DZ11-32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-387-9638
Pliers

123879638
5994530000: RNCC: 3 | RNVC: 2
08.04099-0001: RNCC: 5 | RNVC: 2
08040990001: RNCC: 5 | RNVC: 2

13 Feb 2012

5120-12-152-7787
Zuendver Ladestock

121527787
510070-20752: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-351-4243
Seal Inserter

123514243
9254964000: RNCC: 3 | RNVC: 2

25 Jul 2000

5120-12-333-4798
Bearing And Bushing Inserter

123334798
9108510114: RNCC: 3 | RNVC: 2

22 Dec 1993

5120-12-368-9513
Socket Wrench Socket

123689513
870-A25/32: RNCC: 3 | RNVC: 2
00.45.85.26: RNCC: 5 | RNVC: 2

9 May 2006

5120-12-170-1979
Wrench Kit

121701979
TL5120-0065: RNCC: 2 | RNVC: 2
5120-0065: RNCC: 5 | RNVC: 9
5120-065: RNCC: 5 | RNVC: 9
5120-40906: RNCC: 6 | RNVC: 9

29 Jun 1977

5120-12-700-4423
Mechanical Puller

127004423
51-084212004: RNCC: 2 | RNVC: 2
14-09-010/765.93.SB17: RNCC: 5 | RNVC: 9
765.93.SB170: RNCC: 5 | RNVC: 9

3 Jun 1992

5120-12-342-2578
Montierhuelse

123422578
5870651049: RNCC: 3 | RNVC: 2

13 Jan 1997

5120-12-379-1928
Bearing And Bushing Inserter And Remover

123791928
105-42124W3: RNCC: 3 | RNVC: 2

2 Jul 2009

5120-12-182-1562
Auszieher

121821562
0203834: RNCC: 3 | RNVC: 2
FJ0203834: RNCC: 5 | RNVC: 2

16 Jan 1980

5120-12-363-7549
Spanner Wrench

123637549
1030.00.05.000: RNCC: 3 | RNVC: 2

21 Jul 2004

5120-12-168-1496
Screw Thread Insert Inserter

121681496
01500104000: RNCC: 3 | RNVC: 2
01565040000: RNCC: 5 | RNVC: 9

23 Feb 1977

5120-12-381-4553
Screw Extractor Set

123814553
03988: RNCC: 3 | RNVC: 2
405 11: RNCC: 5 | RNVC: 2
888500: RNCC: 5 | RNVC: 2

18 Feb 2010

5120-12-386-2303
Hand Tube Bender

123862303
2.5151: RNCC: 3 | RNVC: 2

17 Aug 2011

5120-12-301-1976
Schlu Aufnahmeteil

123011976
1513-918.02(5): RNCC: 3 | RNVC: 2

27 Sep 1984

5120-12-181-1577
Screwdriver Bit

121811577
1096-6: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-368-9544
Socket Wrench Socket

123689544
1455-7: RNCC: 3 | RNVC: 2
00.43.64.96: RNCC: 5 | RNVC: 2

9 May 2006

5120-12-133-4656
Open End Wrench

121334656
5185890401: RNCC: 3 | RNVC: 2
5185890401: RNCC: 3 | RNVC: 2
020M00200: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-386-5415
Screwdriver Bit Set And Handle

123865415
3789: RNCC: 3 | RNVC: 2

8 Sep 2011

5120-12-176-1334
Socket Head Screw Key

121761334
0250120S: RNCC: 3 | RNVC: 2
907812: RNCC: 5 | RNVC: 9
148598: RNCC: 5 | RNVC: 9
C1997M12: RNCC: 5 | RNVC: 9
C1997M12MM: RNCC: 6 | RNVC: 9

9 Nov 1978

5120-12-195-8427
Electron Tube Extractor

121958427
103442: RNCC: 3 | RNVC: 2
2550-0003-00: RNCC: 5 | RNVC: 2

21 Apr 1983

5120-12-184-3657
Spanner Wrench

121843657
2171-9855-030: RNCC: 3 | RNVC: 2
2171-9855-010: RNCC: 5 | RNVC: 2
2171-9855-010: RNCC: 5 | RNVC: 2
2171-9855-010: RNCC: 5 | RNVC: 9
2171-9855-000: RNCC: 5 | RNVC: 9
2171-9855-010: RNCC: 5 | RNVC: 9
2171-9855-000: RNCC: 5 | RNVC: 9

19 Jul 1980

5120-12-194-4110
Drive Pin Punch

121944110
3408010: RNCC: 3 | RNVC: 2
745300-10: RNCC: 3 | RNVC: 2
74530-10: RNCC: 5 | RNVC: 9

3 Nov 1982

5120-12-173-1065
Haltevorrichtung

121731065
VG95211-ML-121731065: RNCC: 2 | RNVC: 2
1X56 136 844: RNCC: 3 | RNVC: 2
1X56136844: RNCC: 5 | RNVC: 9

20 Mar 1978

5120-12-129-3293
Box Wrench

121293293
2W1-8X3-16: RNCC: 3 | RNVC: 2
TVA5120-2-263-031.1.1.46: RNCC: 5 | RNVC: 2
630W1-8X3-16: RNCC: 5 | RNVC: 9
20E1/8X3/16: RNCC: 5 | RNVC: 9
2RB3344: RNCC: 5 | RNVC: 9
06780: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-362-0708
Spanner Wrench

123620708
335969-9009.000: RNCC: 3 | RNVC: 2
3359699009000: RNCC: 5 | RNVC: 2

6 Jan 2004

5120-12-330-3419
Stanz- Stempelsatz

123303419
TL5120-0059-18: RNCC: 2 | RNVC: 2

3 Dec 1992

5120-12-372-3848
Torque Wrench

123723848
5122-1CT: RNCC: 3 | RNVC: 2
4000896022472: RNCC: 5 | RNVC: 2

12 Jul 2007

5120-12-194-7010
Montierhuelse

121947010
30-100: RNCC: 3 | RNVC: 2

29 Nov 1982

5120-12-121-6480
Hammer Handle

121216480
46-250,ESCHE,GERADE: RNCC: 3 | RNVC: 2
19-250: RNCC: 5 | RNVC: 9
250DIN5111: RNCC: 5 | RNVC: 9
250DIN5111BLACKIERT: RNCC: 5 | RNVC: 9
DIN5111-250BLACKIERT: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-321-6131
Face Spanner Wrench Socket

123216131
272.369 556: RNCC: 2 | RNVC: 2
272.369 556: RNCC: 3 | RNVC: 2
CTWH-KPT20R: RNCC: 5 | RNVC: 2

7 Jun 1990

5120-12-345-3552
Ku Montierwerkzeug

123453552
213610: RNCC: 3 | RNVC: 2
90000213610: RNCC: 5 | RNVC: 2

4 Mar 1998

5120-12-304-6171
Schluesseleinsatz

123046171
31R16: RNCC: 3 | RNVC: 2
624594: RNCC: 5 | RNVC: 2

6 Aug 1985

5120-12-161-4298
Electronic Equipment Alignment Tool

121614298
1712180114: RNCC: 3 | RNVC: 2
17121 80114: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-168-6375

5120-12-137-1236
Spanner Wrench

121371236
T16818-3: RNCC: 3 | RNVC: 2
T16818-3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-388-3883
Op Montierwerkzeug

123883883
000-281: RNCC: 3 | RNVC: 2

16 Mar 2012

5120-12-381-8772
Cross Tip Screwdriver

123818772
0810040C: RNCC: 3 | RNVC: 2

13 Apr 2010

5120-12-383-8373
Socket Head Screw Key

123838373
0250040C: RNCC: 3 | RNVC: 2

13 Dec 2010

5120-12-363-8364
Bearing And Bushing Inserter

123638364
T671P5001113: RNCC: 3 | RNVC: 2

29 Jul 2004

5120-12-363-9556
Bearing And Bushing Inserter And Remover

123639556
T671P5002118: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-365-0767
Socket Head Screw Key

123650767
42T3: RNCC: 3 | RNVC: 2
6353670: RNCC: 5 | RNVC: 2

25 Nov 2004

5120-12-179-2016
Pruefstift

121792016
2-234: RNCC: 3 | RNVC: 2

15 Jun 1979

5120-12-371-0597
Socket Wrench

123710597
6397: RNCC: 3 | RNVC: 2
08.06460-0002: RNCC: 5 | RNVC: 2
08064600002: RNCC: 5 | RNVC: 2

1 Feb 2007

5120-12-168-5315
Open End Wrench

121685315
98-02: RNCC: 3 | RNVC: 2

18 Mar 1977

5120-12-347-3371
Trowel

123473371
612-210: RNCC: 3 | RNVC: 2

30 Nov 1998

5120-12-196-1716
Spanner Wrench

121961716
4900231-318000: RNCC: 2 | RNVC: 2
G004/111200: RNCC: 3 | RNVC: 2
G004/111200: RNCC: 5 | RNVC: 9

8 Jun 1983

5120-12-176-6192
Socket Wrench

121766192
23290-268140.000: RNCC: 2 | RNVC: 2
23290-268140.000: RNCC: 3 | RNVC: 2
23290-268140: RNCC: 5 | RNVC: 9

11 Dec 1978

5120-12-368-2596
Cross Tip Screwdriver

123682596
47311002-TCS: RNCC: 3 | RNVC: 2

18 Jan 2006

5120-12-311-1238
Lager- Und Einsatz

123111238
406589094300: RNCC: 3 | RNVC: 2

28 Jul 1987

5120-12-372-2003
Pneumatic Tire Valve Core Inserter And Remover

123722003
32.2503: RNCC: 3 | RNVC: 2

26 Jun 2007

5120-12-335-0783
Bearing And Bushing Inserter

123350783
550589001500: RNCC: 3 | RNVC: 2

20 Jul 1994

5120-12-333-1451
Montage- Hebel

123331451
6.226.0.690.016.4: RNCC: 3 | RNVC: 2
6.226.0.690.016.4: RNCC: 5 | RNVC: 9

3 Nov 1993

5120-12-182-4944
Bench And Pipe Vise

121824944
51030035AND51032035: RNCC: 3 | RNVC: 9
324003: RNCC: 5 | RNVC: 9
3291-5: RNCC: 5 | RNVC: 9

6 Feb 1980

5120-12-322-8533
Mechanical Puller Forcing Screw

123228533
99366605: RNCC: 3 | RNVC: 2
530060-2: RNCC: 5 | RNVC: 9

28 Sep 1990

5120-12-174-9538
Hole Sheet Metal Holder

121749538
2072K25: RNCC: 3 | RNVC: 2

9 Aug 1978

5120-12-390-1165
Slip Joint Pliers

123901165
70416: RNCC: 3 | RNVC: 2

8 Oct 2012

5120-12-314-1737
Bearing And Bushing Inserter

123141737
0852 8776: RNCC: 3 | RNVC: 2
8528776: RNCC: 5 | RNVC: 2

15 Jun 1988

5120-12-140-6154
Eindruecker Und Auf

121406154
30355710101018: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-380-1181

5120-12-386-7911
Caulking Gun

123867911
LOCTITE 96003: RNCC: 3 | RNVC: 2

30 Sep 2011

5120-12-177-5792
Box Wrench

121775792
UHC304-43: RNCC: 3 | RNVC: 2
UHC304-43: RNCC: 5 | RNVC: 9

7 Feb 1979

5120-12-173-9141
Hand Sheet Metal Groover

121739141
631B101-10: RNCC: 3 | RNVC: 9
2279B10: RNCC: 5 | RNVC: 9

22 May 1978

5120-12-382-3787
Socket Wrench Socket

123823787
03420064: RNCC: 3 | RNVC: 2
51A1-1/2: RNCC: 5 | RNVC: 2

14 Jun 2010

5120-12-306-2273
Box Wrench

123062273
DIN897-17X19: RNCC: 2 | RNVC: 2
625-17X19: RNCC: 3 | RNVC: 2
23-17X19: RNCC: 3 | RNVC: 2
237817: RNCC: 5 | RNVC: 9
237817: RNCC: 5 | RNVC: 9
2B17X19: RNCC: 5 | RNVC: 9
1408110009: RNCC: 5 | RNVC: 9

7 Feb 1986

5120-12-305-1662
Adjustable Wrench

123051662
1315-300: RNCC: 3 | RNVC: 2
01315012006: RNCC: 5 | RNVC: 2
13150120: RNCC: 5 | RNVC: 2

3 Oct 1985

5120-12-336-5086
Bearing And Bushing Inserter

123365086
0852 5006: RNCC: 3 | RNVC: 2
8525006: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-309-7964
Socket Wrench

123097964
90039-5000-00-04: RNCC: 3 | RNVC: 2

3 Mar 1987

5120-12-359-1325
Open End Wrench

123591325
J0433782D311-000A1-056: RNCC: 3 | RNVC: 2

19 Dec 2002

5120-12-343-5234
Montierdorn

123435234
V1409-T602: RNCC: 3 | RNVC: 2
V1409-T602: RNCC: 5 | RNVC: 2

1 Jul 1997

5120-12-315-4395
Spanner Wrench

123154395
35632604: RNCC: 3 | RNVC: 2
66.3518.630.01-A001: RNCC: 3 | RNVC: 2
66.3518.630.01: RNCC: 5 | RNVC: 2

22 Oct 1988

5120-12-183-0695
Ein- Und Ausbauwerk

121830695
VG95211-ML-121830695: RNCC: 2 | RNVC: 2
804-219-00-00-00: RNCC: 3 | RNVC: 2

18 Mar 1980

5120-12-386-5171
Rotat Holding Tool

123865171
F6787125: RNCC: 3 | RNVC: 2

7 Sep 2011

5120-12-126-2972
Adjustable Wrench

121262972
41637: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-314-0466
Socket Wrench Socket

123140466
5187018: RNCC: 3 | RNVC: 2

1 Jun 1988

5120-12-373-4586
Socket Head Screw Key

123734586
0613 131 08: RNCC: 3 | RNVC: 2

6 Nov 2007

5120-12-168-5275
Spannpratze

121685275
0276081000: RNCC: 3 | RNVC: 2

18 Mar 1977

5120-12-195-3795
Spanner Wrench

121953795
1712120903: RNCC: 3 | RNVC: 2
17121 20903: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-12-392-7309
Socket Wrench Socket

123927309
SEWZG007: RNCC: 3 | RNVC: 2

2 Jul 2013

5120-12-367-5889
Socket Head Screw Key

123675889
10044: RNCC: 3 | RNVC: 2

7 Sep 2005

5120-12-350-8466
Machinist's Vise

123508466
100160: RNCC: 3 | RNVC: 2
100160: RNCC: 5 | RNVC: 9
HEUERFRONT160MMFEST: RNCC: 5 | RNVC: 9

29 May 2000

5120-12-383-1127
Socket Wrench Socket

123831127
T291P0005101: RNCC: 3 | RNVC: 2

15 Sep 2010

5120-12-171-3422
Mechanical Puller

121713422
713A001: RNCC: 3 | RNVC: 9

30 Sep 1977

5120-12-373-4934
Socket Wrench Crowfoot Attachment

123734934
02211022: RNCC: 3 | RNVC: 2

8 Nov 2007

5120-12-140-9699
Ko Fuehrungsbolzen

121409699
0977053000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-369-1761
Hand Terminal Crimping Tool

123691761
975304: RNCC: 3 | RNVC: 2
4003773028017: RNCC: 5 | RNVC: 2

31 May 2006

5120-12-172-2178
Drive Pin Punch

121722178
3644-125: RNCC: 3 | RNVC: 9
107472: RNCC: 5 | RNVC: 2
262269504003: RNCC: 5 | RNVC: 2
3644-3MM: RNCC: 5 | RNVC: 9
B3DIN6458: RNCC: 5 | RNVC: 9

3 Jan 1978

5120-12-147-5405
Socket Wrench Set

121475405
900: RNCC: 3 | RNVC: 2
S33-014M: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-384-0143
Bearing And Bushing Inserter

123840143
F6555764: RNCC: 3 | RNVC: 2

12 Jan 2011

5120-12-336-5070
Pin Inserter

123365070
0850 2897: RNCC: 3 | RNVC: 2
8502897: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-378-7355
Spanner Wrench

123787355
064036: RNCC: 3 | RNVC: 2

7 May 2009

5120-12-340-7281
Hand Material Handling Hook

123407281
54.0070.550.27: RNCC: 3 | RNVC: 2

31 May 1996

5120-12-022-8553

5120-12-041-2665

5120-12-127-3949
Open End Wrench

121273949
200-9X12: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-151-6580
Geh Nietvorrichtung

121516580
2B2001U1V23: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-044-6372

5120-12-147-8888
Mechanical Puller

121478888
218-324: RNCC: 3 | RNVC: 2
1001-8100-0019: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-339-3212
Spanner Wrench

123393212
D11.59661-0445: RNCC: 3 | RNVC: 2
596-065: RNCC: 5 | RNVC: 2
596-065: RNCC: 5 | RNVC: 9
D11.59661-0445: RNCC: 5 | RNVC: 9

9 Nov 1995

5120-12-317-6475
Box Wrench

123176475
DIN3111-36: RNCC: 2 | RNVC: 2
308-36: RNCC: 3 | RNVC: 2

25 Apr 1989

5120-12-172-1838
Spanner Wrench

121721838
903-812-0074: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-381-4397
Socket Wrench Extension

123814397
26229: RNCC: 3 | RNVC: 2
2859-1/4X4: RNCC: 5 | RNVC: 2

17 Feb 2010

5120-12-367-1080
Bearing And Bushing Inserter

123671080
0907768: RNCC: 3 | RNVC: 2

11 Jul 2005

5120-12-161-7502
Einbauwerkzeug

121617502
69535: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-364-5621
Open End Box Wrench

123645621
41082224-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-359-6696
Bearing And Bushing Inserter And Remover

123596696
T622P3004051: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-193-3922
Spanner Wrench

121933922
4312 711 14120: RNCC: 3 | RNVC: 2
5801796-961500: RNCC: 5 | RNVC: 2

19 Jul 1982

5120-12-371-4321
Eindrueckwerkzeug

123714321
80996040203: RNCC: 3 | RNVC: 2
80.99604-0203: RNCC: 5 | RNVC: 2

28 Mar 2007

5120-12-371-3057
Open End Wrench

123713057
5495: RNCC: 3 | RNVC: 2

12 Mar 2007

5120-12-168-3592
Okular Zange

121683592
12709-22000W9: RNCC: 3 | RNVC: 2
12709-22000W9: RNCC: 5 | RNVC: 2
12709-22000W9: RNCC: 5 | RNVC: 9

10 Mar 1977

5120-12-146-0598
Federdre Auszieher

121460598
23114-7122-00: RNCC: 2 | RNVC: 2
510176: RNCC: 5 | RNVC: 2
510176: RNCC: 5 | RNVC: 9
23114-7122-00: RNCC: 5 | RNVC: 9
510176: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-022-8555

5120-12-152-7530
Flat Tip Screwdriver

121527530
HS8960: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-353-4439
Socket Wrench

123534439
28M-7: RNCC: 3 | RNVC: 2
1834647: RNCC: 5 | RNVC: 2

23 Mar 2001

5120-12-129-3477
Hand Shovel

121293477
RB4-2: RNCC: 3 | RNVC: 2
61884: RNCC: 3 | RNVC: 2
DIN20120-2: RNCC: 4 | RNVC: 1
55-2: RNCC: 5 | RNVC: 9
2DIN20120: RNCC: 5 | RNVC: 9
2DIN20120 MIT STIEL: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-4523
Schluessel

123404523
P20564: RNCC: 3 | RNVC: 2

17 Apr 1996

5120-12-345-3741
Mechanical Puller Forcing Screw

123453741
F6 278204: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-352-1904
Mechanical Puller Attachment

123521904
15-1: RNCC: 3 | RNVC: 2

24 Oct 2000

5120-12-182-4209
Aufsatzstueck

121824209
VW758-1: RNCC: 3 | RNVC: 9

30 Jan 1980

5120-12-023-0157

5120-12-386-2794
Hand Vise

123862794
50.000.090: RNCC: 3 | RNVC: 2

22 Aug 2011

5120-12-375-3672
Socket Wrench Adapter

123753672
432M: RNCC: 3 | RNVC: 2
12030010: RNCC: 5 | RNVC: 2

26 May 2008

5120-12-343-3352
Ge Montierwerkzeug

123433352
8514773: RNCC: 3 | RNVC: 2
08514773: RNCC: 5 | RNVC: 9

9 Jun 1997

5120-12-177-8739
Montagevorrichtung

121778739
VG95211-ML-121778739: RNCC: 2 | RNVC: 2
1121-31502W4: RNCC: 3 | RNVC: 2

5 Mar 1979

5120-12-363-8352
Bearing And Bushing Inserter

123638352
T671P5001101: RNCC: 3 | RNVC: 2

29 Jul 2004

5120-12-370-3123
Socket Wrench Socket

123703123
2012002301: RNCC: 3 | RNVC: 2
SAF 2012002301: RNCC: 5 | RNVC: 2

25 Oct 2006

5120-12-359-4414
Seal Inserter

123594414
99374233: RNCC: 3 | RNVC: 2

5 Feb 2003

5120-12-368-2460
Combination Box And Open End Wrench

123682460
40481616-TCS: RNCC: 3 | RNVC: 2

16 Jan 2006

5120-12-382-1925
Socket Head Screw Key

123821925
0250060S: RNCC: 3 | RNVC: 2

20 May 2010

Load More Results