What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 39 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 39 of 62

5120-12-353-1129
Wrecking Bar

123531129
B1281-10: RNCC: 3 | RNVC: 2
B1281-10: RNCC: 5 | RNVC: 2

29 Jan 2001

5120-12-154-9366
Socket Head Screw Key

121549366
TL5180-0201-6: RNCC: 2 | RNVC: 2
5180-0201-6: RNCC: 5 | RNVC: 9
5180-201-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-3753
Socket Wrench Socket

121333753
A7402DZ-11/16: RNCC: 3 | RNVC: 2
46A11-16: RNCC: 3 | RNVC: 2
182011: RNCC: 5 | RNVC: 2
02420038: RNCC: 5 | RNVC: 2
880TAZ-11016: RNCC: 5 | RNVC: 9
7402DZ11-16: RNCC: 5 | RNVC: 9
09940: RNCC: 5 | RNVC: 9
2386120026: RNCC: 5 | RNVC: 9
880TAZ11-16: RNCC: 5 | RNVC: 9
109351: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-050-2149

5120-12-361-9962
Ratchet Wrench Set

123619962
71425250: RNCC: 3 | RNVC: 2

15 Dec 2003

5120-12-126-2678
Ph Schraubendreher

121262678
5500: RNCC: 3 | RNVC: 2
978: RNCC: 3 | RNVC: 2
8045L: RNCC: 3 | RNVC: 2
01.73.52.86: RNCC: 5 | RNVC: 2
110378: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-192-8051
Bearing And Bushing Inserter

121928051
314 589 04 15 00: RNCC: 3 | RNVC: 2
314589041500: RNCC: 3 | RNVC: 2

26 May 1982

5120-12-319-4361
Bearing And Bushing Inserter

123194361
99346226: RNCC: 3 | RNVC: 2

2 Oct 1989

5120-12-384-2645
Aligning Punch

123842645
4910024: RNCC: 3 | RNVC: 2

8 Feb 2011

5120-12-133-4505

5120-12-140-1151

5120-12-323-8809
Spanner Wrench

123238809
201497: RNCC: 3 | RNVC: 2
EW-K50ST: RNCC: 3 | RNVC: 2
KMS50: RNCC: 5 | RNVC: 2

3 Jan 1991

5120-12-123-5120
Open End Wrench

121235120
6-10X12: RNCC: 3 | RNVC: 2
WA3563: RNCC: 5 | RNVC: 2
6-086-417-0101-2: RNCC: 5 | RNVC: 2
01154249: RNCC: 5 | RNVC: 2
1400386: RNCC: 5 | RNVC: 2
450-10X12: RNCC: 5 | RNVC: 9
450V10X12: RNCC: 5 | RNVC: 9
6.086.417.0101.2: RNCC: 5 | RNVC: 9
6-211: RNCC: 5 | RNVC: 9
01900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-5023
Box Wrench

121355023
NO PRIMARY REF 12-135-5023: RNCC: 3 | RNVC: 2
22A3-4X7-8: RNCC: 5 | RNVC: 9
41464044: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-141-7514
Spanner Wrench

121417514
C40107-A26-A3: RNCC: 3 | RNVC: 2
RELWZ26C: RNCC: 5 | RNVC: 2
AW7018-230-01: RNCC: 5 | RNVC: 2
CC180988-1: RNCC: 5 | RNVC: 2
RELWZ26C: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-168-6379

5120-12-368-6646
Box Wrench

123686646
122-17X19: RNCC: 3 | RNVC: 2
00.29.99.89: RNCC: 5 | RNVC: 2

5 Apr 2006

5120-12-347-5844
Socket Wrench Socket

123475844
870-TXE 10: RNCC: 3 | RNVC: 2
45TX-E10: RNCC: 3 | RNVC: 2
58358100: RNCC: 3 | RNVC: 2
00.47.51.95: RNCC: 5 | RNVC: 2

11 Jan 1999

5120-12-320-6264
Mechanical Puller

123206264
1970: RNCC: 3 | RNVC: 2
12719: RNCC: 3 | RNVC: 2
5798760001: RNCC: 5 | RNVC: 2
74450001: RNCC: 5 | RNVC: 2

1 Feb 1990

5120-12-370-6252
Trowel

123706252
749 008 00: RNCC: 3 | RNVC: 2
02.33.62.82: RNCC: 5 | RNVC: 2

1 Dec 2006

5120-12-044-4906

5120-12-327-3838
Socket Wrench

123273838
701012219: RNCC: 3 | RNVC: 2

16 Jan 1992

5120-12-190-7314
Spanner Wrench

121907314
4900144-10000: RNCC: 2 | RNVC: 2
332104-9017.907: RNCC: 3 | RNVC: 2
332104-9017-907: RNCC: 5 | RNVC: 9
332104-9017.907: RNCC: 5 | RNVC: 9

10 Dec 1981

5120-12-170-6931
Spanner Wrench

121706931
1213-100-7: RNCC: 3 | RNVC: 2
1213-100-7: RNCC: 5 | RNVC: 9

28 Jul 1977

5120-12-322-4889
Crimping Tool Die

123224889
600 216: RNCC: 3 | RNVC: 2

27 Aug 1990

5120-12-393-5553
Socket Head Screw Key

123935553
1070658: RNCC: 3 | RNVC: 2
01070658: RNCC: 5 | RNVC: 2

24 Sep 2013

5120-12-388-0287
Crimping Tool Die

123880287
1187-05101: RNCC: 3 | RNVC: 2
80.99625-0106: RNCC: 5 | RNVC: 2
80996250106: RNCC: 5 | RNVC: 2

17 Feb 2012

5120-12-140-7481
Socket Wrench

121407481
DIN7417-9,5GTW: RNCC: 2 | RNVC: 2
FL0088: RNCC: 3 | RNVC: 2
9-5DIN7417GTW: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-312-9988
Lager- Und Einsatz

123129988
000589544300: RNCC: 3 | RNVC: 2
7083626: RNCC: 5 | RNVC: 2

24 Feb 1988

5120-12-184-7138
Abzieher

121847138
VG95211-ML-121847138: RNCC: 2 | RNVC: 2
0851 4892: RNCC: 3 | RNVC: 2
8514892: RNCC: 5 | RNVC: 2

14 Aug 1980

5120-12-156-1585
Socket Wrench Screwdriver Attachment

121561585
NM304-10: RNCC: 3 | RNVC: 2
NM304-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-182-3401
Spanner Wrench

121823401
3906-25000-000: RNCC: 3 | RNVC: 9
WU69A: RNCC: 5 | RNVC: 9

25 Jan 1980

5120-12-325-8119
Seal Inserter

123258119
5870048072: RNCC: 3 | RNVC: 2
790510877: RNCC: 5 | RNVC: 2
5870 048 072: RNCC: 5 | RNVC: 9
5870048072: RNCC: 5 | RNVC: 9

12 Jul 1991

5120-12-337-4831
Socket Wrench

123374831
375-E8: RNCC: 3 | RNVC: 2

9 Mar 1995

5120-12-368-2609
Hose Strap Band Clamping Tool

123682609
79150001-TCS: RNCC: 3 | RNVC: 2

18 Jan 2006

5120-12-154-2560
Spanner Wrench

121542560
5191154-220: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-195-9343
Box Wrench

121959343
537152-0947.000: RNCC: 3 | RNVC: 2
53 71 52-0947: RNCC: 5 | RNVC: 9
537152-0947.000: RNCC: 5 | RNVC: 9

3 May 1983

5120-12-154-2564
Haltedorn

121542564
5191154-200-16: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-321-9871
Hand Hammer

123219871
3007141: RNCC: 3 | RNVC: 2
790508677: RNCC: 5 | RNVC: 2
75310-140G: RNCC: 5 | RNVC: 2
3007140: RNCC: 5 | RNVC: 9

16 Jul 1990

5120-12-339-9589
Mechanical Puller

123399589
5069620: RNCC: 3 | RNVC: 2
698-424-0010: RNCC: 5 | RNVC: 2

6 Feb 1996

5120-12-317-1208
Manual Impact Wrench

123171208
7465: RNCC: 3 | RNVC: 2

10 Mar 1989

5120-12-166-0405
Refrigeration Valve Stem Wrench Socket

121660405
R6810M4-5: RNCC: 3 | RNVC: 2
108890: RNCC: 5 | RNVC: 2

24 Jul 1976

5120-12-393-8820
Seal Inserter

123938820
031.237.0-3: RNCC: 3 | RNVC: 2
3155434: RNCC: 5 | RNVC: 2
03155434: RNCC: 5 | RNVC: 2

17 Oct 2013

5120-12-388-4874
Mounting Punch

123884874
405589021500: RNCC: 3 | RNVC: 2
7100325: RNCC: 5 | RNVC: 2

27 Mar 2012

5120-12-382-8695
Socket Wrench Handle

123828695
11070000-TCS: RNCC: 3 | RNVC: 2

18 Aug 2010

5120-12-141-5649

5120-12-155-9527
Pliers

121559527
NM274-01: RNCC: 3 | RNVC: 2
NM274-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-139-6732
Spanner Wrench

121396732
100032-09950-02: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-352-9220
Mechanical Puller

123529220
CBD45308G01: RNCC: 3 | RNVC: 2

9 Jan 2001

5120-12-197-0735
Socket Wrench Socket

121970735
01TC32525: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-12-322-6432
Hand Pile Extractor

123226432
BEAA001: RNCC: 3 | RNVC: 2

10 Sep 1990

5120-12-023-1468

5120-12-314-0465
Socket Wrench Socket

123140465
5187025: RNCC: 3 | RNVC: 2

1 Jun 1988

5120-12-311-1055
Face Spanner Wrench Socket

123111055
425589000700: RNCC: 3 | RNVC: 2
425 589 00 07 00: RNCC: 5 | RNVC: 2

27 Jul 1987

5120-12-323-9566
Spark Testing Screwdriver

123239566
585: RNCC: 3 | RNVC: 2

11 Jan 1991

5120-12-140-9729
Schluessel

121409729
93D1U2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-358-1817
Plier Wrench

123581817
7140909: RNCC: 3 | RNVC: 2
500-180: RNCC: 3 | RNVC: 2

24 Sep 2002

5120-12-323-5546
Schmiede Untersatz

123235546
NO PRIMARY REF 12-323-5546: RNCC: 3 | RNVC: 2
54890010: RNCC: 5 | RNVC: 9

6 Dec 1990

5120-12-196-7383
Mechanical Puller Attachment

121967383
1X56122203: RNCC: 3 | RNVC: 2
0535787: RNCC: 5 | RNVC: 2
535787: RNCC: 5 | RNVC: 9

9 Aug 1983

5120-12-172-9122
Haltevorrichtung

121729122
VG95211-ML-121729122: RNCC: 2 | RNVC: 2
1X56 136 660: RNCC: 3 | RNVC: 2
1X56136660: RNCC: 5 | RNVC: 9

2 Mar 1978

5120-12-361-1413
Montierhuelse

123611413
2125-129690A02B: RNCC: 2 | RNVC: 2
2125-129690A02B: RNCC: 3 | RNVC: 2

27 Aug 2003

5120-12-376-1255
Hand Powered Poppet Valve Lapper

123761255
12731/30: RNCC: 3 | RNVC: 2
74050030: RNCC: 5 | RNVC: 2

14 Aug 2008

5120-12-341-1343
Piston Ring Compressor

123411343
112905: RNCC: 3 | RNVC: 2
112905: RNCC: 3 | RNVC: 2
0112905: RNCC: 5 | RNVC: 9

31 Jul 1996

5120-12-070-0071

5120-12-090-1345

5120-12-010-9615

5120-12-155-8252
Socket Head Screw Key Set

121558252
NO PRIMARY REF 12-155-8252: RNCC: 3 | RNVC: 2
1997Z5T: RNCC: 5 | RNVC: 9
105997: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-172-2786
Spanner Wrench

121722786
335929-9020.000: RNCC: 3 | RNVC: 2
1240-11200W1: RNCC: 5 | RNVC: 2
1240-11200W1: RNCC: 5 | RNVC: 2
335929-9020.000: RNCC: 5 | RNVC: 9

10 Jan 1978

5120-12-147-4324
Ei Vorspann- Huelse

121474324
01500606032: RNCC: 3 | RNVC: 2
01556060021: RNCC: 5 | RNVC: 9
UV106: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-010-1296

5120-12-188-0030
Auszieher

121880030
2S50381-0000: RNCC: 3 | RNVC: 2
S50381-0000: RNCC: 5 | RNVC: 2

25 May 1981

5120-12-176-7811
Flat Tip Screwdriver

121767811
84032-17: RNCC: 3 | RNVC: 2
84032-17: RNCC: 5 | RNVC: 9

20 Dec 1978

5120-12-339-3222
Bearing And Bushing Inserter

123393222
F11.59699-0125: RNCC: 3 | RNVC: 2
596-046: RNCC: 5 | RNVC: 2
596-046: RNCC: 5 | RNVC: 9
F11.59699-0125: RNCC: 5 | RNVC: 9

9 Nov 1995

5120-12-172-9123
Aufsatz

121729123
VG95211-ML-121729123: RNCC: 2 | RNVC: 2
1X56 136 661: RNCC: 3 | RNVC: 2
1X56136661: RNCC: 5 | RNVC: 9

2 Mar 1978

5120-12-382-7530
Flat Tip Screwdriver

123827530
46601055-TCS: RNCC: 3 | RNVC: 2

4 Aug 2010

5120-12-363-8356
Bearing And Bushing Inserter

123638356
T671P5001105: RNCC: 3 | RNVC: 2

29 Jul 2004

5120-12-312-8917
Spanner Wrench

123128917
1082298: RNCC: 3 | RNVC: 2

17 Feb 1988

5120-12-197-6247
Socket Head Screw Key

121976247
1997L-Z9/64: RNCC: 3 | RNVC: 2
1997LZ9-64: RNCC: 5 | RNVC: 2
85-691-7053: RNCC: 6 | RNVC: 9

8 Nov 1983

5120-12-126-4924
Sheet Metalworking Stake

121264924
631B186-600: RNCC: 3 | RNVC: 2
5061-600: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-383-2180
Socket Wrench Extension

123832180
509QR/10: RNCC: 3 | RNVC: 2
13011003: RNCC: 5 | RNVC: 2

27 Sep 2010

5120-12-317-1445
Combination Box And Open End Wrench

123171445
111Z-3/4: RNCC: 3 | RNVC: 2
1829025: RNCC: 5 | RNVC: 2
7314151829025: RNCC: 5 | RNVC: 2
111AF-C3/4: RNCC: 5 | RNVC: 9
7Z-3/4: RNCC: 5 | RNVC: 9

14 Mar 1989

5120-12-343-5095
Schluessel

123435095
038.005.0: RNCC: 3 | RNVC: 2
038.005.0-4: RNCC: 5 | RNVC: 2

30 Jun 1997

5120-12-147-6742
Socket Wrench

121476742
895-7-16: RNCC: 3 | RNVC: 2
201-7-16: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-191-3586
Hand Tube Flaring Punch

121913586
MOS-L 12-L: RNCC: 3 | RNVC: 2
C 5791 526 CD: RNCC: 5 | RNVC: 2
C5791526CD: RNCC: 5 | RNVC: 2
C 5791 526 CD: RNCC: 5 | RNVC: 2
MOS-I 12-L: RNCC: 5 | RNVC: 9
C5791526CD: RNCC: 5 | RNVC: 9

26 Jan 1982

5120-12-197-4654
Mechanical Puller Attachment

121974654
4900059-751450.004.0: RNCC: 3 | RNVC: 2
4900059-751450-004-0: RNCC: 5 | RNVC: 2

25 Oct 1983

5120-12-192-1852
Halter

121921852
105-82753: RNCC: 3 | RNVC: 2

29 Mar 1982

5120-12-387-8648
Socket Wrench Screwdriver Attachment

123878648
1394215: RNCC: 3 | RNVC: 2
1394215: RNCC: 5 | RNVC: 2
4010886804131: RNCC: 5 | RNVC: 2
ITX 30 L T40: RNCC: 5 | RNVC: 2
4010886804131: RNCC: 5 | RNVC: 2
ITX 30 L T40: RNCC: 5 | RNVC: 2
40008064: RNCC: 5 | RNVC: 2

3 Feb 2012

5120-12-091-2905

5120-12-186-1040
Socket Wrench Handle Bar

121861040
04461266: RNCC: 3 | RNVC: 2
4461266EE5029-86: RNCC: 5 | RNVC: 2

27 Nov 1980

5120-12-340-2334
Mechanical Puller Attachment

123402334
0851 4781.003: RNCC: 3 | RNVC: 2
1387255: RNCC: 5 | RNVC: 9

16 Mar 1996

5120-12-307-7943
Mechanical Puller

123077943
1X56122321: RNCC: 3 | RNVC: 2
1X56122321: RNCC: 5 | RNVC: 2

25 Jul 1986

5120-12-150-4292
Dorn

121504292
838589044300: RNCC: 3 | RNVC: 2
8385890443: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-378-3279
Boiler Tube Wire Brush

123783279
51 0403: RNCC: 3 | RNVC: 2
2920589: RNCC: 5 | RNVC: 2

30 Mar 2009

5120-12-133-3592
Socket Wrench

121333592
315-2-1-00-40: RNCC: 3 | RNVC: 2
2323-991: RNCC: 5 | RNVC: 2
2323-991: RNCC: 5 | RNVC: 2
DBSB1-521ITEM2: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-316-4950
Pipe Wrench

123164950
126063008: RNCC: 3 | RNVC: 2

20 Jan 1989

5120-12-360-0242
Plug Electrical Connector Extractor

123600242
870/000-159: RNCC: 3 | RNVC: 2

28 Mar 2003

5120-12-152-4881
Socket Head Screw Key

121524881
161-4: RNCC: 3 | RNVC: 2
CVM4: RNCC: 3 | RNVC: 2
115-03694-4: RNCC: 5 | RNVC: 9
4-7822-312: RNCC: 5 | RNVC: 9
2092-04: RNCC: 5 | RNVC: 9
57401: RNCC: 5 | RNVC: 9
4460001: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-5822
Manual Impact Wrench

121775822
52761104: RNCC: 3 | RNVC: 9

7 Feb 1979

5120-12-364-5496
Socket Wrench Socket

123645496
02040010-TCS: RNCC: 3 | RNVC: 2

8 Oct 2004

5120-12-177-6330
Auswuchtvorrichtung

121776330
363600: RNCC: 3 | RNVC: 2
363600: RNCC: 3 | RNVC: 9
0363600: RNCC: 5 | RNVC: 9

9 Feb 1979

5120-12-371-7782
Flat Tip Screwdriver

123717782
5200.102.080.010: RNCC: 3 | RNVC: 2

15 May 2007

5120-12-369-5592
Socket Wrench

123695592
157913-3520: RNCC: 3 | RNVC: 2
157913-3520: RNCC: 5 | RNVC: 2
0986613005: RNCC: 5 | RNVC: 2

24 Jul 2006

5120-12-121-1203

5120-12-388-3776
Seal Inserter

123883776
730589051500: RNCC: 3 | RNVC: 2

15 Mar 2012

5120-12-370-3608
Oil Filter Wrench

123703608
6740047141: RNCC: 3 | RNVC: 2
LS7: RNCC: 5 | RNVC: 2

30 Oct 2006

5120-12-156-1657
Cross Tip Screwdriver

121561657
M257-14: RNCC: 3 | RNVC: 2
M257-14: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-321-2681
Open End Wrench

123212681
350MM7X8: RNCC: 3 | RNVC: 2
71111237841: RNCC: 5 | RNVC: 2
03500708: RNCC: 5 | RNVC: 2

25 Apr 1990

5120-12-364-6304
Socket Wrench Crowfoot Attachment

123646304
02190025-TCS: RNCC: 3 | RNVC: 2

15 Oct 2004

5120-12-350-8377
Ratchet Wrench

123508377
49.1827.0057: RNCC: 3 | RNVC: 2

26 May 2000

5120-12-345-6060
Socket Wrench Socket

123456060
900A-1.3/16: RNCC: 3 | RNVC: 2
043293: RNCC: 5 | RNVC: 2

2 Apr 1998

5120-12-375-3603
Sealant Dispenser

123753603
482 ZST: RNCC: 3 | RNVC: 2
4003315068181: RNCC: 5 | RNVC: 2

26 May 2008

5120-12-191-1887
Adapter

121911887
1X56137014: RNCC: 3 | RNVC: 2

18 Jan 1982

5120-12-177-5789
Box Wrench

121775789
UHC301-23: RNCC: 3 | RNVC: 2
UHC301-23: RNCC: 5 | RNVC: 9

7 Feb 1979

5120-12-327-5547
Spanner Wrench

123275547
009-030.183-001W6: RNCC: 3 | RNVC: 2
12790-133000.001: RNCC: 5 | RNVC: 9

3 Feb 1992

5120-12-335-0553
Seal Inserter

123350553
F30276068: RNCC: 3 | RNVC: 2

18 Jul 1994

5120-12-363-3291
Seil Haltewerkzeug

123633291
B00081: RNCC: 3 | RNVC: 2

27 May 2004

5120-12-382-5874
Torque Wrench Adapter

123825874
58250005-TCS: RNCC: 3 | RNVC: 2

13 Jul 2010

5120-12-344-5995
Ge Montierwerkzeug

123445995
1X56136453: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-336-5873
Montierdorn

123365873
0851 8904: RNCC: 3 | RNVC: 2
8518904: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-323-2964
Piston Inserter

123232964
2804 1002: RNCC: 3 | RNVC: 2
WE28 376: RNCC: 5 | RNVC: 2
WE28376: RNCC: 5 | RNVC: 2

12 Nov 1990

5120-12-364-3378
Socket Wrench Socket

123643378
02010016-TCS: RNCC: 3 | RNVC: 2

11 Sep 2004

5120-12-371-7284
Montierwerk Huelse

123717284
405589023100: RNCC: 3 | RNVC: 2

9 May 2007

5120-12-123-5520

5120-12-346-4064
Ventil Auszieher

123464064
CF 842 598 AE: RNCC: 3 | RNVC: 2

22 Jul 1998

5120-12-342-0114
Bearing And Bushing Inserter And Remover

123420114
112710: RNCC: 3 | RNVC: 2
112710: RNCC: 5 | RNVC: 2
0112710: RNCC: 5 | RNVC: 9

29 Nov 1996

5120-12-126-1302

5120-12-339-9595
Mechanical Puller Step Plate

123399595
5070868: RNCC: 3 | RNVC: 2
698-461-0000: RNCC: 5 | RNVC: 2

6 Feb 1996

5120-12-127-3803
Verlaengerung

121273803
83091520007: RNCC: 3 | RNVC: 2
83.09152-0007: RNCC: 3 | RNVC: 2
75.83360-0985: RNCC: 5 | RNVC: 2
75833600985: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5601
Socket Wrench

121235601
C20407-Z7-A33: RNCC: 3 | RNVC: 2
C20407-A7-A33: RNCC: 5 | RNVC: 2
C20407A7A33: RNCC: 5 | RNVC: 2
C20407Z7A33: RNCC: 5 | RNVC: 2
TFS70-05385: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-3116
Brenn Zulaufgeraet

121393116
8205891163: RNCC: 3 | RNVC: 2
078M00200: RNCC: 5 | RNVC: 2
837589216300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-386-2938
Pliers

123862938
50.000.105: RNCC: 3 | RNVC: 2

22 Aug 2011

5120-12-309-7965
Socket Wrench

123097965
74002-804: RNCC: 3 | RNVC: 2

3 Mar 1987

5120-12-132-0158

5120-12-382-7853
Cross Tip Screwdriver

123827853
46360016-TCS: RNCC: 3 | RNVC: 2

9 Aug 2010

5120-12-181-8787
Flat Tip Screwdriver

121818787
NO PRIMARY REF 12-181-8787: RNCC: 3 | RNVC: 2
833-7: RNCC: 5 | RNVC: 9
53955: RNCC: 5 | RNVC: 9

21 Dec 1979

5120-12-190-6057
Einpreszwerkzeug

121906057
873589014300: RNCC: 3 | RNVC: 2

7 Dec 1981

5120-12-364-4721
Torque Wrench Adapter

123644721
58241005-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-330-5527
Stud Inserter

123305527
0851 0467: RNCC: 3 | RNVC: 2
8510467: RNCC: 5 | RNVC: 2

8 Jan 1993

5120-12-316-9837
Combination Box And Open End Wrench

123169837
740082623: RNCC: 3 | RNVC: 2
82623: RNCC: 5 | RNVC: 2

1 Mar 1989

5120-12-377-4373
Pull And Press Tool

123774373
F6374261: RNCC: 3 | RNVC: 2
F6374261: RNCC: 5 | RNVC: 2

15 Jan 2009

5120-12-126-5440
Rollen Druckstueck

121265440
3035892633: RNCC: 3 | RNVC: 2
3035892633: RNCC: 3 | RNVC: 9
303589263300: RNCC: 5 | RNVC: 2
303589263300: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-023-3424

5120-12-155-9519
Swivel Knob Jeweler's Screwdriver

121559519
NM173-05: RNCC: 3 | RNVC: 2
JD5120-12-155-9519: RNCC: 5 | RNVC: 2
NM173-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-6806
Spanner Wrench

123686806
313373: RNCC: 3 | RNVC: 2
0855-03-11-00/37: RNCC: 5 | RNVC: 2

6 Apr 2006

5120-12-319-8893
Seal Inserter

123198893
W32-047-9: RNCC: 3 | RNVC: 2

14 Nov 1989

5120-12-382-5517
Electrical Connector Inserter

123825517
JN1125-01: RNCC: 3 | RNVC: 2

7 Jul 2010

5120-12-140-5646
Socket Head Screw Key

121405646
DIN905-7: RNCC: 3 | RNVC: 2
5242K7: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-312-2112
Slugging Type Box Wrench Socket

123122112
61-55: RNCC: 3 | RNVC: 2
64720-55: RNCC: 5 | RNVC: 2
001.804: RNCC: 5 | RNVC: 2
08061833900: RNCC: 5 | RNVC: 2
64720-SW55: RNCC: 5 | RNVC: 2
647200-55: RNCC: 5 | RNVC: 2

4 Dec 1987

5120-12-358-1419
Elektron Auszieher

123581419
TW2000-14/20: RNCC: 3 | RNVC: 2

18 Sep 2002

5120-12-173-4371
Spanner Wrench

121734371
009-017-400-018W7: RNCC: 3 | RNVC: 2
009-017.400-018W7: RNCC: 5 | RNVC: 2

14 Apr 1978

5120-12-383-1882
Mechanical Puller Set

123831882
KL-0112-21: RNCC: 3 | RNVC: 2

23 Sep 2010

5120-12-146-8058
Flat Tip Screwdriver

121468058
NM256-04: RNCC: 3 | RNVC: 2
JD5120-12-146-8058: RNCC: 5 | RNVC: 2
NM256-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-367-7061
Spanner Wrench

123677061
PKF-K-S: RNCC: 3 | RNVC: 2
6.816-085.0: RNCC: 5 | RNVC: 2

28 Sep 2005

5120-12-347-1876
Montierdorn

123471876
0852 5104: RNCC: 3 | RNVC: 2

10 Nov 1998

5120-12-387-7114
Bearing And Bushing Inserter And Remover

123877114
F6553646: RNCC: 3 | RNVC: 2

26 Jan 2012

5120-12-317-1471
Crimping Tool Die

123171471
300482491: RNCC: 3 | RNVC: 2

14 Mar 1989

5120-12-307-1275
Adapter

123071275
453360: RNCC: 3 | RNVC: 9

13 May 1986

5120-12-175-4264
Multiposition Vise

121754264
160010: RNCC: 3 | RNVC: 9
2807: RNCC: 5 | RNVC: 9

15 Sep 1978

5120-12-337-4814
Pliers

123374814
63008300: RNCC: 3 | RNVC: 2

9 Mar 1995

5120-12-176-1116
Mechanical Puller

121761116
VW771: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-020-5617

5120-12-364-1143
Socket Head Screw Key

123641143
371.477 657: RNCC: 3 | RNVC: 2

20 Aug 2004

5120-12-324-4717
Mater Saug- Griff

123244717
335910-8013.000: RNCC: 2 | RNVC: 2
335910-8013.000: RNCC: 3 | RNVC: 2
335910-8013.000: RNCC: 5 | RNVC: 9

20 Feb 1991

5120-12-342-6787
Screwdriver Bit

123426787
44KTX-T9: RNCC: 3 | RNVC: 2
01350009: RNCC: 5 | RNVC: 2

13 Mar 1997

5120-12-175-3078
Valve Tappet Adjusting Tool

121753078
2568-2: RNCC: 3 | RNVC: 2
13182: RNCC: 5 | RNVC: 2
1048-14: RNCC: 5 | RNVC: 9
43072014: RNCC: 5 | RNVC: 9

6 Sep 1978

5120-12-137-9094
Combination Open End And Spanner Wrench

121379094
2564-027: RNCC: 3 | RNVC: 2
335019-8500.000: RNCC: 3 | RNVC: 2
2564-5000: RNCC: 5 | RNVC: 2
2564-027: RNCC: 5 | RNVC: 9
335019-8500.000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-8330
Schluessel

121358330
VW112: RNCC: 3 | RNVC: 2
VW112: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-316-0540
Socket Head Screw Key

123160540
116306: RNCC: 3 | RNVC: 2

17 Dec 1988

5120-12-144-6297
Dorn

121446297
2360-264128.00.0: RNCC: 2 | RNVC: 2
2360-264128.00.0: RNCC: 3 | RNVC: 2
2360-264128-00-0: RNCC: 5 | RNVC: 2
2360-264128-00-0: RNCC: 5 | RNVC: 2
2360-264128.00.0: RNCC: 5 | RNVC: 2
2360-264128-00-0: RNCC: 5 | RNVC: 9
2360-264128.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-134-9230
Socket Wrench

121349230
1205 1840: RNCC: 3 | RNVC: 2
12051840: RNCC: 5 | RNVC: 2
3.415.0.018.011.4: RNCC: 5 | RNVC: 2
26-50-03-4: RNCC: 5 | RNVC: 9
3-415-0-018-011-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-195-6644
Socket Wrench Socket

121956644
20-1BA: RNCC: 3 | RNVC: 2
1019 BA1: RNCC: 3 | RNVC: 2
616923: RNCC: 5 | RNVC: 2
15-BA1: RNCC: 5 | RNVC: 9
201685: RNCC: 5 | RNVC: 9
15-BA1: RNCC: 5 | RNVC: 9

24 Mar 1983

5120-12-002-1972

5120-12-140-2467

5120-12-126-3305
Blacksmith's Top Swage

121263305
5048020015: RNCC: 3 | RNVC: 2
0001801-15: RNCC: 3 | RNVC: 2
5048.02-15: RNCC: 5 | RNVC: 2
0B15DIN5104: RNCC: 5 | RNVC: 9
18-15: RNCC: 5 | RNVC: 9
5048-15: RNCC: 5 | RNVC: 9
DIN5104-OB15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-2815
Seal Inserter

121762815
403589006100: RNCC: 3 | RNVC: 2
4035890061/00: RNCC: 5 | RNVC: 2

23 Nov 1978

5120-12-329-4312
Spanner Wrench

123294312
081-140176-000-0: RNCC: 2 | RNVC: 2
081-140176-000-0: RNCC: 3 | RNVC: 2

19 Aug 1992

5120-12-374-6545
Mechanical Puller Adapter

123746545
F6341206: RNCC: 3 | RNVC: 2

4 Mar 2008

5120-12-176-1098
Einpreszwerkzeug

121761098
3030: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-345-9736
Montierdorn

123459736
110830: RNCC: 3 | RNVC: 2

26 May 1998

5120-12-379-5975
Hand Terminal Crimping Tool

123795975
97 52 05: RNCC: 3 | RNVC: 2
975205: RNCC: 5 | RNVC: 2

13 Aug 2009

5120-12-134-2633
Ausbauvorrichtung

121342633
006M02100: RNCC: 3 | RNVC: 2
VM53885: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-149-4743
Kartenzieher

121494743
20530824: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-319-5322
Socket Head Screw Key

123195322
335907-0006.000: RNCC: 2 | RNVC: 2
335907-0006.000: RNCC: 5 | RNVC: 2

10 Oct 1989

5120-12-010-9644

5120-12-178-8399
Friction Igniter

121788399
A9327: RNCC: 3 | RNVC: 9
400 241: RNCC: 3 | RNVC: 9

18 May 1979

5120-12-381-3955
Socket Head Screw Key

123813955
110812: RNCC: 3 | RNVC: 2

9 Feb 2010

5120-12-368-6835
Socket Wrench Adapter

123686835
530105: RNCC: 3 | RNVC: 2
530105: RNCC: 5 | RNVC: 2

6 Apr 2006

5120-12-384-2184
Lifting Pneumatic Bag Kit

123842184
1315001700: RNCC: 3 | RNVC: 2

3 Feb 2011

5120-12-372-6973
Ausziehersatz

123726973
1590: RNCC: 3 | RNVC: 2
96746202: RNCC: 5 | RNVC: 2

13 Aug 2007

5120-12-143-9624
Spanner Wrench

121439624
27-159: RNCC: 3 | RNVC: 2
25-10-106: RNCC: 5 | RNVC: 2
450-5-25-10-55: RNCC: 5 | RNVC: 2
MC21-17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-328-4264
Pin Inserter

123284264
F6376567: RNCC: 3 | RNVC: 2

16 May 1992

5120-12-193-2160
Mechanical Puller Forcing Screw

121932160
61841800: RNCC: 3 | RNVC: 2
61841800169: RNCC: 5 | RNVC: 9

30 Jun 1982

5120-12-332-9813
Bearing And Bushing Inserter

123329813
352589004300: RNCC: 3 | RNVC: 2

18 Oct 1993

5120-12-378-6475
Quick Adjusting Screw Clamp

123786475
TGN40T30: RNCC: 3 | RNVC: 2
00.20.50.13: RNCC: 5 | RNVC: 2

28 Apr 2009

5120-12-161-4302
Spanner Wrench

121614302
3805024708: RNCC: 3 | RNVC: 2
38050 24708: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-5844
Haltevorrichtung

121775844
112800: RNCC: 3 | RNVC: 2
112800: RNCC: 3 | RNVC: 9
0112800: RNCC: 5 | RNVC: 9

7 Feb 1979

5120-12-173-0155
Ausstosz- Duese

121730155
74111: RNCC: 3 | RNVC: 9
SPUELRATTE: RNCC: 5 | RNVC: 9

13 Mar 1978

5120-12-172-5292
Spanner Wrench

121725292
773410: RNCC: 3 | RNVC: 9

23 Jan 1978

5120-12-137-4421
Spanner Wrench

121374421
WA92: RNCC: 3 | RNVC: 2
09000092-00: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-155-9414
Socket Wrench

121559414
NM289-07: RNCC: 3 | RNVC: 2
NM289-07: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-391-7325
Torque Wrench

123917325
730DR/65: RNCC: 3 | RNVC: 2
96501865: RNCC: 5 | RNVC: 2
4018754187638: RNCC: 5 | RNVC: 2

2 Apr 2013

5120-12-189-9723
Bearing And Bushing Inserter

121899723
99374451: RNCC: 3 | RNVC: 2
490020: RNCC: 5 | RNVC: 9
490020: RNCC: 5 | RNVC: 9

29 Oct 1981

5120-12-325-5349
Mechanical Puller

123255349
8363343: RNCC: 3 | RNVC: 2

14 Jun 1991

5120-12-383-8375
Socket Head Screw Key

123838375
0250050C: RNCC: 3 | RNVC: 2

13 Dec 2010

5120-12-311-8227
Preformed Packing Inserter

123118227
16718: RNCC: 3 | RNVC: 2
9040245: RNCC: 5 | RNVC: 2

20 Oct 1987

5120-12-358-7766
Bearing And Bushing Inserter

123587766
80996040013: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-320-5627
Hammer Handle

123205627
3244050: RNCC: 3 | RNVC: 2

26 Jan 1990

5120-12-176-1115
Auszieher

121761115
VW681: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-341-1346
Torque Wrench Adapter

123411346
331620: RNCC: 3 | RNVC: 2

31 Jul 1996

5120-12-303-4267
Rohr- Zange

123034267
152005: RNCC: 3 | RNVC: 9

21 Mar 1985

5120-12-131-6768
Spanner Wrench

121316768
90693: RNCC: 3 | RNVC: 2
6X25DWN79: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-349-5563
Drift Punch

123495563
453 7408-457: RNCC: 3 | RNVC: 2
453 7408-457: RNCC: 5 | RNVC: 2
4537408-457: RNCC: 5 | RNVC: 9

2 Dec 1999

5120-12-156-0420
Schwenkbrems Hebel

121560420
167404605: RNCC: 3 | RNVC: 2
7101-72-148-10: RNCC: 5 | RNVC: 9
7101-72-148.10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-6689
Swivel Knob Jeweler's Screwdriver

121206689
415-2: RNCC: 3 | RNVC: 9
A0-25X2DIN8320: RNCC: 5 | RNVC: 9
DIN8320-A0,25X2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-327-4572
Torque Wrench Adapter

123274572
D5513#8792-22/ISOLIERT 1000V: RNCC: 3 | RNVC: 9

23 Jan 1992

5120-12-147-4341
Screw Thread Insert Tang Breakoff Tool

121474341
01585080000: RNCC: 3 | RNVC: 2
01582080000: RNCC: 5 | RNVC: 9
01582767000: RNCC: 5 | RNVC: 9
1196-5: RNCC: 5 | RNVC: 9
2-108: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-151-6577
Geh Nietvorrichtung

121516577
100251-1100V2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-333-8348
Abstimmwerkzeugsatz

123338348
53.1622.990.00: RNCC: 3 | RNVC: 2

16 Feb 1994

5120-12-126-5955

5120-12-338-3192
Hand Rail Bender

123383192
22.18: RNCC: 3 | RNVC: 2
22.18: RNCC: 5 | RNVC: 2

22 Jun 1995

5120-12-359-3626
Bearing And Bushing Inserter

123593626
VTR173: RNCC: 3 | RNVC: 2
T304P50T0001: RNCC: 5 | RNVC: 2
T304P5001051: RNCC: 5 | RNVC: 9

28 Jan 2003

5120-12-310-4599
Stud Inserter And Remover

123104599
4591: RNCC: 3 | RNVC: 2
300-1: RNCC: 3 | RNVC: 2
180403: RNCC: 5 | RNVC: 2

22 May 1987

5120-12-338-2536
Mechanical Puller

123382536
66-92-016-3: RNCC: 3 | RNVC: 2

12 Jun 1995

5120-12-123-4984
Body And Fender Repair Punch

121234984
031A351: RNCC: 3 | RNVC: 2
3027: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-369-5298
Aufbl Steuergeraet

123695298
0800012700: RNCC: 3 | RNVC: 2

18 Jul 2006

5120-12-343-3838
Montierdorn

123433838
418589003100: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-313-4265
Zentrier- Ring

123134265
80996040075: RNCC: 3 | RNVC: 2
80.99604.0075: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-187-5994
Socket Wrench

121875994
1945NB-M10: RNCC: 3 | RNVC: 2
105337: RNCC: 5 | RNVC: 2

21 Apr 1981

5120-12-163-8889
Abzieher

121638889
1X56122271: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5165
Adjustable Wrench

121235165
JD5120-12-123-5165: RNCC: 3 | RNVC: 2
596-402 200: RNCC: 5 | RNVC: 2
596-200: RNCC: 5 | RNVC: 9
571J001-250: RNCC: 5 | RNVC: 9
594-250: RNCC: 5 | RNVC: 9
7101-86-01-18: RNCC: 5 | RNVC: 9
7101-86-01.18: RNCC: 5 | RNVC: 9
1335-250: RNCC: 5 | RNVC: 9
169126401: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-175-7800
Socket Wrench

121757800
DIN3125-17: RNCC: 2 | RNVC: 2
342-17: RNCC: 3 | RNVC: 2
87967: RNCC: 3 | RNVC: 2
4510018: RNCC: 3 | RNVC: 2
05410017: RNCC: 3 | RNVC: 9
425-17: RNCC: 3 | RNVC: 9
50452: RNCC: 5 | RNVC: 9

16 Oct 1978

5120-12-154-1015
Mechanical Puller

121541015
CH1775-9NM: RNCC: 3 | RNVC: 2
839589243300: RNCC: 5 | RNVC: 2
CH1775-9NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-1017
Spanner Wrench

121561017
SK6908: RNCC: 3 | RNVC: 2
25704-360755-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-181-2898
Screwdriver Bit

121812898
23305-264100.17.0: RNCC: 2 | RNVC: 2
23305-264100-17-0: RNCC: 3 | RNVC: 2
23305-264100-17-0: RNCC: 5 | RNVC: 9
23305-264100.17.0: RNCC: 5 | RNVC: 9

12 Nov 1979

5120-12-123-7092

5120-12-319-2996
Bearing And Bushing Inserter

123192996
99374262: RNCC: 3 | RNVC: 2

20 Sep 1989

5120-12-301-3647
Sheet Metalworking Dolly Block

123013647
263: RNCC: 3 | RNVC: 2
263: RNCC: 5 | RNVC: 9
172898: RNCC: 5 | RNVC: 9
3768: RNCC: 5 | RNVC: 9

10 Oct 1984

5120-12-387-5183
Socket Wrench Extension

123875183
0908715: RNCC: 3 | RNVC: 2

4 Jan 2012

5120-12-183-2643
Hand Terminal Crimping Tool

121832643
7781999590: RNCC: 3 | RNVC: 2
9711: RNCC: 3 | RNVC: 9
7781999590: RNCC: 3 | RNVC: 9

3 Apr 1980

5120-12-306-2753
Joint Breaking Wedge

123062753
945.900.002: RNCC: 3 | RNVC: 9

13 Feb 1986

5120-12-090-5467

5120-12-368-7377
Socket Wrench Screwdriver Attachment

123687377
3244-TX 15: RNCC: 3 | RNVC: 2
49TX-T15: RNCC: 3 | RNVC: 2
00.47.63.10: RNCC: 5 | RNVC: 2
02100015: RNCC: 5 | RNVC: 2

11 Apr 2006

5120-12-190-1337
Gewindebolzen

121901337
62105600: RNCC: 3 | RNVC: 2
621 056 00: RNCC: 5 | RNVC: 9
6210560050: RNCC: 5 | RNVC: 9

9 Nov 1981

5120-12-338-5274
Aufweit Spannbacke

123385274
608387: RNCC: 3 | RNVC: 2

24 Jul 1995

5120-12-314-2785
Hyd Einbauwerkzeug

123142785
0852 4405: RNCC: 3 | RNVC: 2
8524405: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-185-3117
Halte- Klammer

121853117
4240621: RNCC: 3 | RNVC: 2

25 Sep 1980

5120-12-372-2746
Mechanical Puller Attachment

123722746
1-90-S: RNCC: 3 | RNVC: 2

3 Jul 2007

5120-12-358-4886
Mut Sprengwerkzeug

123584886
12615-1: RNCC: 3 | RNVC: 2
8599-1: RNCC: 5 | RNVC: 2
71250001: RNCC: 5 | RNVC: 2

21 Oct 2002

5120-12-385-3042
Saddler's Sewing Awl

123853042
50.000.127: RNCC: 3 | RNVC: 2

19 May 2011

5120-12-338-6631
Socket Wrench Set

123386631
6715MG: RNCC: 3 | RNVC: 2
1831349: RNCC: 5 | RNVC: 2

10 Aug 1995

5120-12-371-2241
Socket Wrench Screwdriver Attachment

123712241
3230-XZNL 6X100: RNCC: 3 | RNVC: 2

1 Mar 2007

5120-12-330-0043
Mechanical Puller

123300043
0852 3055: RNCC: 3 | RNVC: 2
8523055: RNCC: 5 | RNVC: 2

21 Oct 1992

5120-12-176-6024
Spanner Wrench

121766024
84032-9805: RNCC: 3 | RNVC: 2
84032-9805: RNCC: 5 | RNVC: 9

11 Dec 1978

5120-12-368-6877
Socket Wrench Screwdriver Attachment

123686877
3244-TX 50: RNCC: 3 | RNVC: 2
00.47.70.17: RNCC: 5 | RNVC: 2

6 Apr 2006

5120-12-090-1852

5120-12-373-1333
Float

123731333
577191: RNCC: 3 | RNVC: 2
02.33.97.20: RNCC: 5 | RNVC: 2
4007875771918: RNCC: 5 | RNVC: 2

1 Oct 2007

5120-12-010-5210

5120-12-129-8769
Retaining Ring Installation Tool

121298769
0681200008: RNCC: 3 | RNVC: 2
EF2722: RNCC: 5 | RNVC: 2
KDAL5484: RNCC: 5 | RNVC: 9
0681200008: RNCC: 5 | RNVC: 9
EF2722: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-148-0934
Programmier- Zange

121480934
VG95211-ML-121480934: RNCC: 2 | RNVC: 2
28023: RNCC: 3 | RNVC: 2
28 023-001: RNCC: 5 | RNVC: 2
28023-001: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-192-3637
Screwdriver Bit

121923637
CH3147/33: RNCC: 3 | RNVC: 2
560589160800: RNCC: 5 | RNVC: 2
560589160800: RNCC: 5 | RNVC: 2
5605891608/00: RNCC: 5 | RNVC: 2
560589160800: RNCC: 5 | RNVC: 2
CH3147/33: RNCC: 5 | RNVC: 9
VM86085: RNCC: 5 | RNVC: 9

19 Apr 1982

5120-12-145-6826
Unterse Halbschale

121456826
NO PRIMARY REF 12-145-6826: RNCC: 3 | RNVC: 2
444-31-106-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-1490
Spanner Wrench

121941490
4S51438-0000: RNCC: 3 | RNVC: 2
MAGERD 1521: RNCC: 5 | RNVC: 9

6 Oct 1982

5120-12-123-5766
Socket Wrench Socket

121235766
46A7-8: RNCC: 3 | RNVC: 2
880TAZ7-8: RNCC: 5 | RNVC: 2
02420044: RNCC: 5 | RNVC: 2
109354: RNCC: 5 | RNVC: 9
09970: RNCC: 5 | RNVC: 9
2386120028: RNCC: 5 | RNVC: 9
880TAZ-7/8: RNCC: 5 | RNVC: 9
7402DZ7-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-310-8784
Mechanical Puller

123108784
001589393300: RNCC: 3 | RNVC: 2
503 GROESZE 3: RNCC: 3 | RNVC: 2

3 Jul 1987

5120-12-333-5681
Drive Pin Punch

123335681
076-240080-907-0: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-124-8505
Schluessel

121248505
35-10-12: RNCC: 3 | RNVC: 2
FW406F: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-368-6919
Socket Wrench Screwdriver Attachment

123686919
3210IN-10: RNCC: 3 | RNVC: 2
00.49.76.29: RNCC: 5 | RNVC: 2

6 Apr 2006

5120-12-186-1925
Mechanical Puller

121861925
143640: RNCC: 3 | RNVC: 2

5 Dec 1980

5120-12-123-5637

5120-12-337-1806
Mechanical Puller Attachment

123371806
0852 3045: RNCC: 3 | RNVC: 2
8523045: RNCC: 5 | RNVC: 2

30 Jan 1995

5120-12-130-1795

5120-12-145-1013
Dorn

121451013
837589084300: RNCC: 3 | RNVC: 2
8375890843: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-188-5918
Box Wrench

121885918
0706D101557/2: RNCC: 3 | RNVC: 2
5776: RNCC: 5 | RNVC: 9
0706D101557/2-B: RNCC: 5 | RNVC: 9
0706D101557/2-C: RNCC: 5 | RNVC: 9
0706D101557/2-D: RNCC: 5 | RNVC: 9

20 Jul 1981

5120-12-123-5599
Combination Box And Open End Wrench

121235599
0276074001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-186-7338
Mechanical Puller

121867338
99347046: RNCC: 3 | RNVC: 2
430030: RNCC: 5 | RNVC: 9
430030: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-312-2172
Eindrueckwerkzeug

123122172
30-507: RNCC: 3 | RNVC: 2

4 Dec 1987

5120-12-126-4915
Stabbing Awl

121264915
664-6MITGRIFF: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-345-3734
Box Wrench

123453734
F3 0274968: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-364-4725
Socket Wrench Extension

123644725
12270020-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-328-6464
Pin Remover

123286464
F30276423: RNCC: 3 | RNVC: 2
F362800276423: RNCC: 5 | RNVC: 2
F362800276423: RNCC: 5 | RNVC: 2
F362800276423: RNCC: 5 | RNVC: 2

11 Jun 1992

5120-12-312-9989
Lager- Und Einsatz

123129989
000589554300: RNCC: 3 | RNVC: 2
7083627: RNCC: 5 | RNVC: 2

24 Feb 1988

5120-12-344-5221
Werkst Druckstueck

123445221
SV1 31006: RNCC: 3 | RNVC: 9

4 Nov 1997

5120-12-392-5221
Carrier Socket

123925221
CTP45253G001: RNCC: 3 | RNVC: 2

14 Jun 2013

5120-12-371-3475
Fixed Open End Wrench Set

123713475
156S 12M: RNCC: 3 | RNVC: 2
00.25.35.13: RNCC: 5 | RNVC: 2

19 Mar 2007

5120-12-385-5067
Flat Tip Screwdriver

123855067
52751080: RNCC: 3 | RNVC: 2
660700-8: RNCC: 3 | RNVC: 2
F30006245: RNCC: 5 | RNVC: 2

9 Jun 2011

5120-12-305-8813
Bearing And Bushing Inserter

123058813
4900059-752015.000.0: RNCC: 2 | RNVC: 2
4900059-752015.000.0: RNCC: 3 | RNVC: 2

30 Dec 1985

5120-12-351-4636
Socket Wrench Handle

123514636
8811KUKA: RNCC: 3 | RNVC: 2

29 Jul 2000

5120-12-331-3940
We Montierwerkzeug

123313940
2653-990940.01: RNCC: 2 | RNVC: 2
2653-990940.01: RNCC: 3 | RNVC: 2

3 May 1993

5120-12-169-2816
Einbauwerkz Spindel

121692816
01500605020: RNCC: 3 | RNVC: 2
01556050010: RNCC: 5 | RNVC: 9

3 May 1977

5120-12-311-0632
Seal Inserter

123110632
624589011500: RNCC: 3 | RNVC: 2

22 Jul 1987

5120-12-382-4058
Mechanical Puller

123824058
20-2-3: RNCC: 3 | RNVC: 2

16 Jun 2010

5120-12-308-5533
Bearing And Bushing Inserter

123085533
99374002: RNCC: 3 | RNVC: 2
417100: RNCC: 5 | RNVC: 9
417100: RNCC: 5 | RNVC: 9

22 Oct 1986

5120-12-123-5890

5120-12-332-8443
An Montierwerkzeug

123328443
6911000006: RNCC: 3 | RNVC: 2
0910000006: RNCC: 5 | RNVC: 9

27 Sep 1993

5120-12-372-2108
Pinch Bar

123722108
029185190: RNCC: 3 | RNVC: 2

27 Jun 2007

5120-12-352-1912
Socket Wrench Socket

123521912
50TX-E12: RNCC: 3 | RNVC: 2
03270012: RNCC: 5 | RNVC: 2

24 Oct 2000

5120-12-158-9748
Electronic Equipment Alignment Tool

121589748
1-917: RNCC: 3 | RNVC: 2
700-170: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-149-5825
Socket Wrench

121495825
NO PRIMARY REF 12-149-5825: RNCC: 3 | RNVC: 2
26R4X5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1794
Drill Guide

121261794
TL5120-0052-140A: RNCC: 2 | RNVC: 2
1418H: RNCC: 3 | RNVC: 2
104057: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-359-2636
Hydraulic Jack Parts Kit

123592636
055.051.5: RNCC: 3 | RNVC: 2
0005800526: RNCC: 5 | RNVC: 2

16 Jan 2003

5120-12-357-7347
Bearing And Bushing Inserter

123577347
F30274249: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-044-4927

5120-12-327-4875
Open End Box Wrench

123274875
612-16X18: RNCC: 3 | RNVC: 2
1410110008: RNCC: 5 | RNVC: 2
DIN3118-16X18: RNCC: 5 | RNVC: 9

27 Jan 1992

5120-12-195-0262
Mechanical Puller

121950262
1X56136318: RNCC: 3 | RNVC: 2

3 Jan 1983

5120-12-369-7344
Socket Wrench Set

123697344
771-LMU: RNCC: 3 | RNVC: 2
00.50.97.53: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-314-2781
Ge Montierwerkzeug

123142781
0852 4755: RNCC: 3 | RNVC: 2
8524755: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-339-3286
Socket Head Screw Key

123393286
364/T10X100: RNCC: 3 | RNVC: 2
01329: RNCC: 5 | RNVC: 2
0015387930: RNCC: 5 | RNVC: 2

9 Nov 1995

5120-12-330-0046
Mechanical Puller

123300046
0852 3424: RNCC: 3 | RNVC: 2
8523424: RNCC: 5 | RNVC: 2

21 Oct 1992

5120-12-161-9507
Inspection Mirror

121619507
5515L: RNCC: 3 | RNVC: 2
148156: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-002-0135

5120-12-354-0323
Bearing And Bushing Inserter And Remover

123540323
541589006300: RNCC: 3 | RNVC: 2

29 May 2001

5120-12-353-4707
Montierdorn

123534707
323818: RNCC: 3 | RNVC: 2
961709: RNCC: 5 | RNVC: 2

28 Mar 2001

5120-12-023-1405

5120-12-368-8580
Socket Wrench Set

123688580
D32EMAU-2: RNCC: 3 | RNVC: 2
6281310: RNCC: 5 | RNVC: 2

2 May 2006

5120-12-305-6405
Electronic Equipment Alignment Tool

123056405
1-971: RNCC: 3 | RNVC: 9

28 Nov 1985

5120-12-141-5650
Mechanical Puller

121415650
124: RNCC: 3 | RNVC: 2
108294: RNCC: 5 | RNVC: 9
4570-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-325-8113
Lager- Und Einsatz

123258113
5870057014: RNCC: 3 | RNVC: 2
790511577: RNCC: 5 | RNVC: 2
5870 057 014: RNCC: 5 | RNVC: 9
5870057014: RNCC: 5 | RNVC: 9

12 Jul 1991

5120-12-390-7513
Socket Wrench Screwdriver Attachment

123907513
02050004-TCS: RNCC: 3 | RNVC: 2

7 Dec 2012

5120-12-196-7386
Drive Pin Punch

121967386
1X56126475: RNCC: 3 | RNVC: 2
0535795: RNCC: 5 | RNVC: 2
535795: RNCC: 5 | RNVC: 9

9 Aug 1983

5120-12-126-1823
Swivel Bench Hook

121261823
NO PRIMARY REF 12-126-1823: RNCC: 3 | RNVC: 2
445-1-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-315-8966
Socket Wrench

123158966
0009419310: RNCC: 3 | RNVC: 2

6 Dec 1988

5120-12-094-1265

5120-12-094-1218

5120-12-170-2616

5120-12-394-4431
Open End Wrench

123944431
H02.011962: RNCC: 3 | RNVC: 2

3 Dec 2013

5120-12-368-2113
Plier Clamp

123682113
132: RNCC: 3 | RNVC: 2
6399900: RNCC: 5 | RNVC: 2
4010886639993: RNCC: 5 | RNVC: 2

9 Jan 2006

5120-12-131-7620

5120-12-383-7005
Mechanical Puller

123837005
1X56.136.574: RNCC: 3 | RNVC: 2

26 Nov 2010

5120-12-383-3689
Schlu Aufnahmeteil

123833689
636600: RNCC: 3 | RNVC: 2

12 Oct 2010

5120-12-382-8014
Slip Joint Pliers

123828014
07 5014 000: RNCC: 3 | RNVC: 2

10 Aug 2010

5120-12-126-3306
Blacksmith's Top Swage

121263306
5048020020: RNCC: 3 | RNVC: 2
0001801-20: RNCC: 3 | RNVC: 2
5048.02-20: RNCC: 5 | RNVC: 2
0B20DIN5104: RNCC: 5 | RNVC: 9
DIN5104-OB20: RNCC: 5 | RNVC: 9
5048-20: RNCC: 5 | RNVC: 9
18-20: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-144-6424
Socket Wrench

121446424
83.09152-5009: RNCC: 3 | RNVC: 2
83091525009: RNCC: 3 | RNVC: 2
95.85300-0985: RNCC: 5 | RNVC: 2
95853000985: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-196-1483
Aligning Punch

121961483
EV4-837: RNCC: 3 | RNVC: 2
EV4-837: RNCC: 5 | RNVC: 9

7 Jun 1983

5120-12-134-2738
Mechanical Puller

121342738
005M01300: RNCC: 3 | RNVC: 2
VM73540-1-3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-364-3135
Socket Wrench Socket

123643135
01020004-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-334-2167
Mechanical Puller

123342167
WRSOM0144: RNCC: 3 | RNVC: 2

13 Apr 1994

5120-12-368-0401
Spanner Wrench

123680401
80996030231: RNCC: 3 | RNVC: 2
80.99603-0231: RNCC: 5 | RNVC: 2

23 Nov 2005

5120-12-338-0678
Socket Head Screw Key

123380678
56-0060-449-00WZ: RNCC: 3 | RNVC: 2

17 May 1995

5120-12-328-8378
Face Spanner Wrench Socket

123288378
78203 55980: RNCC: 2 | RNVC: 2
7820355980: RNCC: 3 | RNVC: 2
78203 55980: RNCC: 5 | RNVC: 9

26 Jun 1992

5120-12-385-2544
Hand Hammer

123852544
50.000.181: RNCC: 3 | RNVC: 2

13 May 2011

5120-12-316-2838
Mechanical Puller Step Plate

123162838
105-31762W2.02: RNCC: 3 | RNVC: 2

6 Jan 1989

5120-12-139-5736

5120-12-349-3756
Socket Head Screw Key Set

123493756
911BM7: RNCC: 3 | RNVC: 2
44826: RNCC: 5 | RNVC: 2

5 Nov 1999

5120-12-368-1018
Flat Tip Screwdriver

123681018
47601005-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-145-6822
Socket Head Screw Key

121456822
7085-7506: RNCC: 3 | RNVC: 2
100198-00-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-161-0088
Ventil Auszieher

121610088
510306-0900: RNCC: 2 | RNVC: 2
510306-0900: RNCC: 5 | RNVC: 2
510306-0900: RNCC: 5 | RNVC: 9
510306-0900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-2812
Blindni Mundstueck

121942812
GS 2000-8D: RNCC: 3 | RNVC: 9
GS2000-8D: RNCC: 5 | RNVC: 9

19 Oct 1982

5120-12-091-2911

5120-12-332-8458
Socket Wrench Set

123328458
6-200: RNCC: 3 | RNVC: 2

27 Sep 1993

5120-12-126-1202
Drill Drift

121261202
DIN317-1: RNCC: 2 | RNVC: 2
1601030009: RNCC: 3 | RNVC: 2
63305003003: RNCC: 3 | RNVC: 2
017076: RNCC: 3 | RNVC: 2
TYP266 1U.2: RNCC: 5 | RNVC: 2
17076: RNCC: 5 | RNVC: 9
1004214: RNCC: 5 | RNVC: 9
989340: RNCC: 5 | RNVC: 9
1DIN317: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-1829
Socket Wrench Handle

123711829
SA49586-5: RNCC: 3 | RNVC: 2

26 Feb 2007

5120-12-319-2579
Lager- Und B Griff

123192579
99370005: RNCC: 3 | RNVC: 2

15 Sep 1989

5120-12-332-9301
C Clamp

123329301
370 150: RNCC: 3 | RNVC: 2

6 Oct 1993

5120-12-370-9924
Flat Tip Screwdriver

123709924
4-103-S: RNCC: 3 | RNVC: 2

24 Jan 2007

5120-12-195-4241
Fu Montierwerkzeug

121954241
4982003: RNCC: 3 | RNVC: 2

23 Feb 1983

5120-12-390-0333
Hand Bellows

123900333
KV3034: RNCC: 3 | RNVC: 2

26 Sep 2012

5120-12-369-3107
Ratchet Wrench

123693107
7R18: RNCC: 3 | RNVC: 2
071425118: RNCC: 5 | RNVC: 2
6082540: RNCC: 5 | RNVC: 2

20 Jun 2006

5120-12-386-2929
Hand-Operated Grommet And Eyelet Press

123862929
50.000.091: RNCC: 3 | RNVC: 2

22 Aug 2011

5120-12-386-4984
Torque Wrench

123864984
26KLI2011: RNCC: 3 | RNVC: 2

6 Sep 2011

5120-12-381-7411
Mechanical Puller

123817411
AZVB226200200XXXXX: RNCC: 3 | RNVC: 2

25 Mar 2010

5120-12-373-4192
Cross Tip Screwdriver

123734192
66371: RNCC: 3 | RNVC: 2
4001002663718: RNCC: 5 | RNVC: 2

30 Oct 2007

5120-12-342-1978
Combination Box And Open End Wrench Set

123421978
536-616: RNCC: 3 | RNVC: 2

2 Jan 1997

5120-12-140-9568
Schluessel

121409568
RP516-63: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-371-7512
Hammer Handle

123717512
30-08-022700: RNCC: 3 | RNVC: 2

10 May 2007

5120-12-133-5945
Open End Wrench

121335945
NO PRIMARY REF 12-133-5945: RNCC: 3 | RNVC: 2
610A46: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-184-5766
Mechanical Puller

121845766
FM7009: RNCC: 3 | RNVC: 2
7700002567: RNCC: 5 | RNVC: 2

2 Aug 1980

5120-12-364-5658
Socket Wrench Crowfoot Attachment

123645658
02200014-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-350-4794
Mechanical Puller

123504794
1668466: RNCC: 3 | RNVC: 2
1569811: RNCC: 5 | RNVC: 2

4 Apr 2000

5120-12-041-5744

5120-12-330-3227
Lamp Extractor

123303227
770 633: RNCC: 3 | RNVC: 2

2 Dec 1992

5120-12-041-2659

5120-12-356-6933
Socket Wrench

123566933
98F52107520000: RNCC: 3 | RNVC: 2

26 Mar 2002

5120-12-368-9260
Socket Wrench Socket

123689260
771-S38: RNCC: 3 | RNVC: 2
00.51.82.41: RNCC: 5 | RNVC: 2

8 May 2006

5120-12-356-2861
Socket Wrench Socket

123562861
80996030069: RNCC: 3 | RNVC: 2
80.99603-0069: RNCC: 5 | RNVC: 2

8 Feb 2002

5120-12-362-5427
Slip Joint Pliers

123625427
54.0084.960.63: RNCC: 3 | RNVC: 2
2619LS-250: RNCC: 5 | RNVC: 2

5 Mar 2004

5120-12-342-2430
Mechanical Puller Attachment

123422430
80996010056: RNCC: 3 | RNVC: 2
80.99601-0056: RNCC: 5 | RNVC: 2

9 Jan 1997

5120-12-130-6312
Hand Helical Spring Puller Hook

121306312
LG142627WZ9: RNCC: 3 | RNVC: 2
LG142627: RNCC: 5 | RNVC: 2
WZ9: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-392-9443
Hand Hydraulic Jack Kit

123929443
2021510RW100: RNCC: 3 | RNVC: 2

24 Jul 2013

5120-12-139-3066
Dorn

121393066
8205890239: RNCC: 3 | RNVC: 2
016M02100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-335-3739
Lamp Ausziehersatz

123353739
7.486.52: RNCC: 3 | RNVC: 2

15 Aug 1994

5120-12-304-2536
Seal Inserter

123042536
3B33-5-2: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-12-141-9790
Open End Wrench

121419790
571A203B1 3-8IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-196-4530
C Clamp

121964530
3X12RSG1: RNCC: 3 | RNVC: 9

7 Jul 1983

5120-12-303-9845
Crimping Tool Die

123039845
169404-0: RNCC: 3 | RNVC: 2

28 May 1985

5120-12-310-3900
Flat Tip Screwdriver

123103900
00008902300: RNCC: 3 | RNVC: 2
0000 890 2300: RNCC: 5 | RNVC: 2

18 May 1987

5120-12-127-5419

5120-12-126-3042

5120-12-145-4255
Vise Jaw Caps

121454255
NO PRIMARY REF 12-145-4255: RNCC: 3 | RNVC: 2
2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-387-8074
Mechanical Puller Adapter

123878074
F6555788: RNCC: 3 | RNVC: 2

31 Jan 2012

5120-12-377-7655
Mounting Sleeve

123777655
F30377862: RNCC: 3 | RNVC: 2

10 Feb 2009

5120-12-368-1110
Socket Wrench Extension

123681110
11010020-TCS: RNCC: 3 | RNVC: 2

8 Dec 2005

5120-12-387-2897
Tap And Reamer Wrench

123872897
034.097: RNCC: 3 | RNVC: 2

24 Nov 2011

5120-12-341-4432
Hand Material Handling Hook

123414432
WRYUG8202: RNCC: 3 | RNVC: 2
WINRB382100: RNCC: 5 | RNVC: 2

5 Sep 1996

5120-12-345-9716
Wrench Extension Handle

123459716
3015R-009120.001.0: RNCC: 2 | RNVC: 2

25 May 1998

5120-12-364-2918
Cross Tip Screwdriver

123642918
48301003-TCS: RNCC: 3 | RNVC: 2

8 Sep 2004

5120-12-384-9771
Drive Pin Punch

123849771
162.0463: RNCC: 3 | RNVC: 2

14 Apr 2011

5120-12-177-5048
Spanner Wrench

121775048
700503-8168W1: RNCC: 3 | RNVC: 2
700503-8168W1: RNCC: 5 | RNVC: 9

5 Feb 1979

5120-12-321-1943
Cross Tip Screwdriver

123211943
668400-2: RNCC: 3 | RNVC: 2
4325201: RNCC: 5 | RNVC: 9
66840/2: RNCC: 5 | RNVC: 9

11 Apr 1990

5120-12-376-0229
Torque Wrench

123760229
26056: RNCC: 3 | RNVC: 2
2851-0,8-2,0: RNCC: 5 | RNVC: 2

1 Aug 2008

5120-12-388-2414
Adjuster And Mounti

123882414
7997029-990945.000.0: RNCC: 3 | RNVC: 2

6 Mar 2012

5120-12-133-3972
Screwdriver Bit

121333972
55Z1-8: RNCC: 3 | RNVC: 2
114453: RNCC: 5 | RNVC: 2
6990Z1-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-372-7552
Spatula

123727552
5/12: RNCC: 3 | RNVC: 2

17 Aug 2007

5120-12-362-6086
Socket Wrench Adapter

123626086
1012002400: RNCC: 3 | RNVC: 2

11 Mar 2004

5120-12-131-7151
Dorn

121317151
3155890339: RNCC: 3 | RNVC: 2
3155890339: RNCC: 3 | RNVC: 9
315589033900: RNCC: 5 | RNVC: 2
315589033900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-311-3353
Mitnehmers Adapter

123113353
01TC34933: RNCC: 3 | RNVC: 2

19 Aug 1987

5120-12-171-0558
Socket Wrench Socket

121710558
80.99603-0024: RNCC: 3 | RNVC: 2
80996030024: RNCC: 3 | RNVC: 2
403 589 00 13/00: RNCC: 3 | RNVC: 2
4035890013/00: RNCC: 5 | RNVC: 2
403 589 00 13/00: RNCC: 5 | RNVC: 2
403 589 00 13/00: RNCC: 5 | RNVC: 2
403589001300: RNCC: 5 | RNVC: 9

1 Sep 1977

5120-12-142-0265
Abzieher Haken

121420265
552: RNCC: 3 | RNVC: 2
TS5120-0657-552: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-371-8915
Screwdriver Bit

123718915
TL5110-0037-10: RNCC: 2 | RNVC: 2
INNENSECHSKANT:2&1,5: RNCC: 3 | RNVC: 2

25 May 2007

5120-12-021-3511

5120-12-330-8567
Seal Inserter

123308567
0524053: RNCC: 3 | RNVC: 2

17 Feb 1993

5120-12-133-4567

5120-12-199-0778
Hand Terminal Crimping Tool

121990778
S10: RNCC: 3 | RNVC: 2
S10: RNCC: 5 | RNVC: 9

23 Mar 1984

5120-12-367-4975
Eindrueckwerkzeug

123674975
1X54 188 284: RNCC: 3 | RNVC: 2

25 Aug 2005

5120-12-389-2774
Socket Wrench Socket

123892774
140589000300: RNCC: 3 | RNVC: 2
140589000300: RNCC: 5 | RNVC: 2

15 Jun 2012

5120-12-353-8745
Socket Wrench Extension

123538745
000589241600: RNCC: 3 | RNVC: 2

16 May 2001

5120-12-326-5293
Mechanical Puller Attachment

123265293
8524731: RNCC: 3 | RNVC: 2

1 Oct 1991

5120-12-368-8412
Flat Tip Screwdriver

123688412
66 2000 8: RNCC: 3 | RNVC: 2
4721-5: RNCC: 3 | RNVC: 2
SN1400: RNCC: 5 | RNVC: 2

27 Apr 2006

5120-12-388-6261
Torque Wrench Adapter

123886261
008.023: RNCC: 3 | RNVC: 2
008.023: RNCC: 5 | RNVC: 2

5 Apr 2012

5120-12-145-2620
Combination Open End And Spanner Wrench

121452620
431271105730: RNCC: 3 | RNVC: 2
5800357-900000: RNCC: 5 | RNVC: 2
5800357-900000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-331-4485
Schluessel

123314485
5440-903: RNCC: 3 | RNVC: 2
5510102: RNCC: 5 | RNVC: 2

5 May 1993

5120-12-371-5109
Ha Aufbrech Ramme

123715109
TL5120-0127-020: RNCC: 2 | RNVC: 2
0500010DE-MS: RNCC: 3 | RNVC: 2
5120-00142: RNCC: 6 | RNVC: 9

11 Apr 2007

5120-12-171-3146
Auflage

121713146
VG95211-ML-121713146: RNCC: 2 | RNVC: 2
105-31711W2.02: RNCC: 3 | RNVC: 2
105-31711W2-02: RNCC: 5 | RNVC: 2

29 Sep 1977

5120-12-332-0766
Spanner Wrench

123320766
9108510205: RNCC: 3 | RNVC: 2
467-431/0851-12-00-00: RNCC: 5 | RNVC: 2

21 Jul 1993

5120-12-309-9347
Open End Wrench

123099347
9.1316.002: RNCC: 3 | RNVC: 2
9 1316 0020: RNCC: 5 | RNVC: 2

20 Mar 1987

5120-12-174-2342
Electronic Equipment Alignment Tool

121742342
1-301: RNCC: 3 | RNVC: 9

15 Jun 1978

5120-12-333-5943
W Spannvorrichtung

123335943
425589033100: RNCC: 3 | RNVC: 2
425589033100: RNCC: 5 | RNVC: 9

11 Jan 1994

5120-12-363-2367
Bearing And Bushing Inserter And Remover

123632367
F6374244: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-147-6736
Socket Wrench

121476736
895-5: RNCC: 3 | RNVC: 2
200-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-168-5279
Aufsteck- Huelse

121685279
2776009000: RNCC: 3 | RNVC: 2

18 Mar 1977

5120-12-315-6960
Torque Wrench Adapter

123156960
503261: RNCC: 3 | RNVC: 2

22 Nov 1988

5120-12-349-9194
Mechanical Puller Attachment

123499194
45.004.51.262: RNCC: 3 | RNVC: 2

26 Jan 2000

5120-12-137-4887
Rack Bar Jack

121374887
NO PRIMARY REF 12-137-4887: RNCC: 3 | RNVC: 2
BB326239: RNCC: 5 | RNVC: 9
54013-20630: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-197-0679
Torque Wrench Adapter

121970679
1256210: RNCC: 3 | RNVC: 2
65769: RNCC: 5 | RNVC: 2
735/20 MIT 14 MM SECHSKANT: RNCC: 5 | RNVC: 9

15 Sep 1983

5120-12-022-8137

5120-12-135-2057
Screwdriver Bit

121352057
851H5-5-1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-353-5802
Spanner Wrench

123535802
9840002: RNCC: 3 | RNVC: 2

11 Apr 2001

5120-12-187-7401
Face Spanner Wrench Socket

121877401
30AM024: RNCC: 3 | RNVC: 2

4 May 1981

5120-12-369-7596
Dreh Haltewerkzeug

123697596
408589013100: RNCC: 3 | RNVC: 2
7083645: RNCC: 5 | RNVC: 2

15 Aug 2006

5120-12-370-1136
Socket Wrench Set

123701136
96830160: RNCC: 3 | RNVC: 2

21 Sep 2006

5120-12-364-3465
Combination Box And Open End Wrench

123643465
40080707-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-364-5513
Swivel Knob Jeweler's Screwdriver

123645513
47510001-TCS: RNCC: 3 | RNVC: 2

8 Oct 2004

5120-12-325-5346
Mechanical Puller

123255346
8364743: RNCC: 3 | RNVC: 2

14 Jun 1991

5120-12-151-6588
Ro Nietvorrichtung

121516588
WKW9008-0105V5-8: RNCC: 3 | RNVC: 2
WKW9008-0105V5.8: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-044-4896

5120-12-393-7603
Torque Wrench

123937603
10123910: RNCC: 3 | RNVC: 2

9 Oct 2013

5120-12-300-2467
Mechanical Puller

123002467
3907.37000.000: RNCC: 3 | RNVC: 2
83091436141: RNCC: 5 | RNVC: 2

18 Jul 1984

5120-12-385-2339
Hand Chain Breaker-Riveter

123852339
58050127500: RNCC: 3 | RNVC: 2

12 May 2011

5120-12-359-9461
Hand Caulking Tool

123599461
1000042-195400.10: RNCC: 3 | RNVC: 2

24 Mar 2003

5120-12-139-7643
Schluessel

121397643
3125890107: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-179-6584

5120-12-389-5308
Flat Tip Screwdriver

123895308
46211055-TCS: RNCC: 3 | RNVC: 2

18 Jul 2012

5120-12-185-1886
Gegenhalter

121851886
01TC33239: RNCC: 3 | RNVC: 2

18 Sep 1980

5120-12-306-1882
Flat Tip Screwdriver

123061882
NO PRIMARY REF 12-306-1882: RNCC: 3 | RNVC: 2
9715-2-5X14X250: RNCC: 5 | RNVC: 9

4 Feb 1986

5120-12-185-4261
Rubber Mallet

121854261
DIN5128-A100S90: RNCC: 2 | RNVC: 2
6650-1: RNCC: 3 | RNVC: 2
A100SDIN5128-90: RNCC: 5 | RNVC: 9

4 Oct 1980

5120-12-156-1576
Socket Wrench Socket

121561576
NM293-20: RNCC: 3 | RNVC: 2
NM293-20: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-1908
Spring Inserter And Remover

123301908
1000042-195300.12: RNCC: 3 | RNVC: 2

12 Nov 1992

5120-12-317-7747
Socket Wrench Set

123177747
888ZN: RNCC: 3 | RNVC: 2
4486350013: RNCC: 5 | RNVC: 2
888Z: RNCC: 5 | RNVC: 9

11 May 1989

5120-12-376-8860
Socket Wrench Screwdriver Attachment

123768860
351843: RNCC: 3 | RNVC: 2

17 Nov 2008

5120-12-175-3967
Open End Wrench

121753967
EV4-831: RNCC: 3 | RNVC: 2
EV4-831: RNCC: 5 | RNVC: 9

13 Sep 1978

5120-12-305-6418
Drahtwickler

123056418
VG95211-ML-123056418: RNCC: 2 | RNVC: 2
G200/R3278: RNCC: 3 | RNVC: 9
G200/R3278: RNCC: 5 | RNVC: 9
G200/R3278: RNCC: 5 | RNVC: 9
08L551: RNCC: 5 | RNVC: 9

28 Nov 1985

5120-12-181-5076
Dorn

121815076
123950: RNCC: 3 | RNVC: 2
698-718-0020: RNCC: 5 | RNVC: 2
181217: RNCC: 5 | RNVC: 2
89231031: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-146-0399
Hand Crank

121460399
6151221: RNCC: 3 | RNVC: 2
6151221: RNCC: 3 | RNVC: 2
6151221: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-314-0702
Spanner Wrench

123140702
V-7001.013-831-4: RNCC: 3 | RNVC: 2

2 Jun 1988

5120-12-192-1287
Piston Ring Expander

121921287
W287-160: RNCC: 3 | RNVC: 2

24 Mar 1982

5120-12-153-7194
Face Spanner Wrench Socket

121537194
CH1773-18NM: RNCC: 3 | RNVC: 2
5615890509/00: RNCC: 5 | RNVC: 2
561589050900: RNCC: 5 | RNVC: 2
CH1773-18NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-343-7088
Socket Wrench

123437088
4328-17: RNCC: 3 | RNVC: 2
43280017: RNCC: 5 | RNVC: 2

16 Jul 1997

5120-12-180-8726
Spanner Wrench

121808726
VG95211-ML-121808726: RNCC: 2 | RNVC: 2
AFG014747: RNCC: 3 | RNVC: 2
AFG17-01-09-01-10: RNCC: 5 | RNVC: 2
AFG1701090110: RNCC: 5 | RNVC: 2

8 Oct 1979

5120-12-177-5849
Montagewerkzeug

121775849
314700: RNCC: 3 | RNVC: 9

7 Feb 1979

5120-12-314-8039
Screw Thread Insert Tang Breakoff Tool

123148039
01586350000: RNCC: 3 | RNVC: 2
01584350000: RNCC: 5 | RNVC: 2

12 Aug 1988

5120-12-023-2490

5120-12-126-2948
Screw Extractor

121262948
TL5120-0052-20A: RNCC: 2 | RNVC: 2
1411-3,2: RNCC: 3 | RNVC: 2
104043: RNCC: 5 | RNVC: 2
1411: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-394-3394
Socket Wrench Handle

123943394
H01.118842: RNCC: 3 | RNVC: 2

21 Nov 2013

5120-12-354-8162
Mechanical Puller

123548162
40-5: RNCC: 3 | RNVC: 2

28 Aug 2001

5120-12-376-6416
Hand Terminal Crimping Tool

123766416
75Z-0-4-4: RNCC: 3 | RNVC: 2
22544612: RNCC: 5 | RNVC: 2

23 Oct 2008

5120-12-146-5142

5120-12-181-5085
Abziehvorrichtung

121815085
141000: RNCC: 3 | RNVC: 2
4683: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-350-8467
Machinist's Vise

123508467
FRONT 120: RNCC: 3 | RNVC: 2
HEUERFRONT120MMFEST: RNCC: 5 | RNVC: 2
HEUERFRONT120MMFEST: RNCC: 5 | RNVC: 9
FRONT 120: RNCC: 5 | RNVC: 9

29 May 2000

5120-12-364-9583
Swivel Knob Jeweler's Screwdriver

123649583
T4838XESD30: RNCC: 3 | RNVC: 2

18 Nov 2004

5120-12-362-1137
Hand Terminal Crimping Tool

123621137
55647.107.859: RNCC: 3 | RNVC: 2
55647.107.859: RNCC: 5 | RNVC: 2
80996250050: RNCC: 5 | RNVC: 2

12 Jan 2004

5120-12-189-0902
Socket Wrench

121890902
NO PRIMARY REF 12-189-0902: RNCC: 3 | RNVC: 2
43321722: RNCC: 5 | RNVC: 9

26 Aug 1981

5120-12-369-4630
Hand Storage Battery Carrier

123694630
0008069-801: RNCC: 3 | RNVC: 2
028015879: RNCC: 5 | RNVC: 2

6 Jul 2006

5120-12-383-7896
Spanner Wrench

123837896
601279: RNCC: 3 | RNVC: 2

8 Dec 2010

5120-12-186-9865
Hand Terminal Crimping Tool

121869865
WZ44: RNCC: 3 | RNVC: 2

25 Feb 1981

5120-12-342-6696
Electrical Contact Remover

123426696
18781 24247: RNCC: 2 | RNVC: 2
1878124247: RNCC: 3 | RNVC: 2
18781 24247: RNCC: 5 | RNVC: 9

13 Mar 1997

5120-12-339-1132
Seal Inserter

123391132
1X56137133: RNCC: 3 | RNVC: 2
0694816: RNCC: 5 | RNVC: 2
1X56 137 133: RNCC: 5 | RNVC: 2

11 Oct 1995

5120-12-010-9671

5120-12-362-5425
Pliers

123625425
54.0084.960.67: RNCC: 3 | RNVC: 2
2457VDE: RNCC: 5 | RNVC: 2

5 Mar 2004

5120-12-153-5197
Socket Wrench Handle Ratchet Head

121535197
CH1772-42-4FE: RNCC: 3 | RNVC: 2
8205893861/04: RNCC: 5 | RNVC: 2
820589386104: RNCC: 5 | RNVC: 2
CH1772-42-4FE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-192-3638
Ausziehvorrichtung

121923638
CH1778/26: RNCC: 3 | RNVC: 2
590589203300: RNCC: 5 | RNVC: 2
590589203300: RNCC: 5 | RNVC: 2
5905892033/00: RNCC: 5 | RNVC: 2
590589203300: RNCC: 5 | RNVC: 2
CH1778/26: RNCC: 5 | RNVC: 9

19 Apr 1982

5120-12-194-6678
Hand Hammer

121946678
50477-7-0: RNCC: 3 | RNVC: 2
50486-6-0: RNCC: 3 | RNVC: 2

25 Nov 1982

5120-12-366-4062
Spanner Wrench

123664062
7803030008: RNCC: 3 | RNVC: 2

21 Apr 2005

5120-12-123-5891

5120-12-149-9689

5120-12-333-5676
Drive Pin Punch

123335676
076-240080-902-0: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-326-0197
Mater Saug- Griff

123260197
602.0: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-391-4116
Socket Wrench Socket

123914116
2716-1: RNCC: 3 | RNVC: 2
4000896086405: RNCC: 5 | RNVC: 2

11 Mar 2013

Load More Results