What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 38 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 38 of 62

5120-12-159-7557
Montage- Hebel

121597557
1918-040018: RNCC: 2 | RNVC: 2
1918-040018: RNCC: 3 | RNVC: 2
1918-040018: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-7336
Stempel

121767336
VG95211-ML-121767336: RNCC: 2 | RNVC: 2
105-42121W2.03: RNCC: 3 | RNVC: 2
105-42121W2-03: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-174-3208
Crimping Tool Die

121743208
FA0011-31: RNCC: 3 | RNVC: 2
FA0011-31: RNCC: 5 | RNVC: 9

21 Jun 1978

5120-12-347-9734
Spanner Wrench

123479734
LL-98BA0008: RNCC: 3 | RNVC: 2

18 Mar 1999

5120-12-143-5758
Spanner Wrench

121435758
100109-9400-01: RNCC: 3 | RNVC: 2
100109-9400-01: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-178-0235
Ambosz

121780235
750-381: RNCC: 3 | RNVC: 9

14 Mar 1979

5120-12-156-1482
Gewindeschutzkappe

121561482
VG95211-ML-121561482: RNCC: 2 | RNVC: 2
160-88742-08: RNCC: 3 | RNVC: 2
160-88742-08: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-376-1987
Torque Wrench Adapter

123761987
7678080: RNCC: 3 | RNVC: 2
732/10-16: RNCC: 3 | RNVC: 2
58221016: RNCC: 5 | RNVC: 2
7678080: RNCC: 5 | RNVC: 2
4002805722169: RNCC: 5 | RNVC: 2
516.2316: RNCC: 5 | RNVC: 2
4002805722169: RNCC: 5 | RNVC: 2
7212-16: RNCC: 5 | RNVC: 2
7212-16: RNCC: 5 | RNVC: 2

22 Aug 2008

5120-12-137-4185

5120-12-198-3380
Spanner Wrench

121983380
FM7023: RNCC: 3 | RNVC: 2

17 Jan 1984

5120-12-342-1971
Spanner Wrench

123421971
5511301: RNCC: 3 | RNVC: 2

2 Jan 1997

5120-12-384-3250
Plier Clamp

123843250
F30450845: RNCC: 3 | RNVC: 2

14 Feb 2011

5120-12-344-0330
Hand Abrasive Wheel Dresser

123440330
4BS04030: RNCC: 3 | RNVC: 2

2 Sep 1997

5120-12-379-8442
Hand Pipe And Sewer Auger

123798442
7.2433: RNCC: 3 | RNVC: 2

8 Sep 2009

5120-12-002-1269

5120-12-319-9424
Stift Spannkloben

5120-12-345-3738
Seal Inserter

123453738
F3 0274969: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-364-3480
Pliers

123643480
65015160-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-380-0450
Cable Type Ratchet Lever Puller

123800450
160396: RNCC: 3 | RNVC: 2

22 Sep 2009

5120-12-364-5653
Open End Box Wrench

123645653
41081417-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-183-0822
Face Spanner Wrench Socket

121830822
0702D100530-7: RNCC: 3 | RNVC: 2

18 Mar 1980

5120-12-137-4249
Hand Blind Riveter

121374249
7166-0005: RNCC: 3 | RNVC: 2
7160-0005: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-307-1923
Mechanical Puller Adapter

123071923
320-997536-11: RNCC: 3 | RNVC: 2

21 May 1986

5120-12-354-8159
Torque Wrench

123548159
4550-40: RNCC: 3 | RNVC: 2
4550-40: RNCC: 3 | RNVC: 2

28 Aug 2001

5120-12-173-6721
Spannkloben

121736721
8335GR3: RNCC: 3 | RNVC: 9
1655-120: RNCC: 5 | RNVC: 9

28 Apr 1978

5120-12-381-7091
Torque Wrench Adapter

123817091
901C990016.000.0: RNCC: 2 | RNVC: 2
901C990016.000.0: RNCC: 3 | RNVC: 2

19 Mar 2010

5120-12-139-3134

5120-12-153-4987
Aufhaengevorrichtun

121534987
CH1920-5: RNCC: 3 | RNVC: 2
CH1920-5: RNCC: 5 | RNVC: 9
6-0888-01-1-0105: RNCC: 5 | RNVC: 9
6.0888.01.1.0105: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-3773
Socket Wrench Crowfoot Attachment

121333773
FC38: RNCC: 3 | RNVC: 2
540A1 3-16: RNCC: 3 | RNVC: 2
02500054: RNCC: 5 | RNVC: 2
AN8506-13: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-337-2509
Montiervorrichtung

123372509
2-865-46520: RNCC: 3 | RNVC: 2

8 Feb 1995

5120-12-152-7966
Gl Einpresz- Huelse

121527966
CH1989-15: RNCC: 3 | RNVC: 2
3.415.0.018.073.4: RNCC: 3 | RNVC: 9
CH1989-15: RNCC: 5 | RNVC: 2
CH1989-15: RNCC: 5 | RNVC: 9
1205 1884: RNCC: 5 | RNVC: 9
1205 1884: RNCC: 5 | RNVC: 9
12051884: RNCC: 5 | RNVC: 9
3-415-0-018-073-4: RNCC: 5 | RNVC: 9
3.415.0.018.073.4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-349-5561
Mechanical Puller

123495561
453 7408-254: RNCC: 3 | RNVC: 2
453 7408-254: RNCC: 5 | RNVC: 2
4537408-254: RNCC: 5 | RNVC: 9
(241)S34654537408-254: RNCC: 8 | RNVC: 2

2 Dec 1999

5120-12-379-1804
Mecha Ejector Tool

123791804
105-10151W4: RNCC: 3 | RNVC: 2

1 Jul 2009

5120-12-306-2860
Schluessel

123062860
M514047-72-1: RNCC: 3 | RNVC: 2

14 Feb 1986

5120-12-330-4474
Mechanical Puller Attachment

123304474
26-21C1623G01P22: RNCC: 3 | RNVC: 2

16 Dec 1992

5120-12-337-8596
Hand Hammer

123378596
32200-8000: RNCC: 3 | RNVC: 2
32200-8000GR: RNCC: 5 | RNVC: 9

25 Apr 1995

5120-12-326-0183
Mechanical Puller Attachment

123260183
660589013400: RNCC: 3 | RNVC: 2
63-561: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-314-7038
Fuehrungs- Platte

123147038
F11.49062-0915: RNCC: 3 | RNVC: 2

30 Jul 1988

5120-12-303-7653
Torque Wrench Adapter

123037653
VG95211-ML-123037653: RNCC: 2 | RNVC: 2
6430C: RNCC: 3 | RNVC: 2
737/10: RNCC: 3 | RNVC: 2
6263980001: RNCC: 5 | RNVC: 2

24 Apr 1985

5120-12-133-3984
Screwdriver Bit

121333984
NO PRIMARY REF 12-133-3984: RNCC: 3 | RNVC: 2
7090Z5-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-1561
Socket Wrench Adapter

121561561
NM300-06: RNCC: 3 | RNVC: 2
NM300-06: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-6439
Blacksmith's Anvil

121266439
14169UND14200: RNCC: 3 | RNVC: 2
54884050UND54891010: RNCC: 3 | RNVC: 2
10-2H0RN: RNCC: 5 | RNVC: 9
14169 MIT 14200 14200-3: RNCC: 5 | RNVC: 9
5120-01070: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-152-5609
Sch Einbauwerkzeug

121525609
3630124: RNCC: 3 | RNVC: 2
365 0001: RNCC: 3 | RNVC: 2
365 0001-000-00.3: RNCC: 3 | RNVC: 2
83.09144-0036: RNCC: 5 | RNVC: 2
83091440036: RNCC: 5 | RNVC: 2
169126902: RNCC: 5 | RNVC: 2
3650001: RNCC: 5 | RNVC: 9
7101-86-33-10: RNCC: 5 | RNVC: 9
7101-86-33.10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-339-8872
Socket Wrench Socket

123398872
NO PRIMARY REF 12-339-8872: RNCC: 3 | RNVC: 2
1000A-3/4: RNCC: 5 | RNVC: 9
2389120019: RNCC: 5 | RNVC: 9

29 Jan 1996

5120-12-330-5539
Stud Inserter

123305539
0851 0488: RNCC: 3 | RNVC: 2
8510488: RNCC: 5 | RNVC: 2

8 Jan 1993

5120-12-330-7079
Flexible Cable Terminal Swaging Tool

123307079
UPJ2 JUNIOR: RNCC: 3 | RNVC: 2
100 300: RNCC: 5 | RNVC: 2

28 Jan 1993

5120-12-163-6084
Ausbauwerkzeug

121636084
VG95211-ML-121636084: RNCC: 2 | RNVC: 2
105-14181W6: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-189-3448
Gewindedorn

121893448
30/10: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-12-166-0411
Refrigeration Valve Stem Wrench Socket

121660411
R6810M-10: RNCC: 3 | RNVC: 2
MAT566-0018F6REP2: RNCC: 5 | RNVC: 2
MAT566-0019F9REP2: RNCC: 5 | RNVC: 2
KLS956127: RNCC: 5 | RNVC: 2
1088965: RNCC: 5 | RNVC: 2
R6810M10: RNCC: 5 | RNVC: 9
108896: RNCC: 5 | RNVC: 9
R6801M: RNCC: 6 | RNVC: 9
1L686: RNCC: 6 | RNVC: 9

24 Jul 1976

5120-12-196-8632
Auswechselwe Griff

121968632
2103915: RNCC: 3 | RNVC: 2
652E-458: RNCC: 5 | RNVC: 2

25 Aug 1983

5120-12-342-2152
Face Spanner Wrench Socket

123422152
80996030140: RNCC: 3 | RNVC: 2
80.99603-0140: RNCC: 5 | RNVC: 2

7 Jan 1997

5120-12-196-6666
Socket Wrench Crowfoot Attachment

121966666
4900059-721310.001.0: RNCC: 2 | RNVC: 2
4900059-721310.001.0: RNCC: 3 | RNVC: 2
4900059-721310.001.0: RNCC: 5 | RNVC: 2
4900059-721310-001-0: RNCC: 5 | RNVC: 2
721310-001-0: RNCC: 5 | RNVC: 9

1 Aug 1983

5120-12-198-3797
Swivel Knob Jeweler's Screwdriver

121983797
SR100: RNCC: 3 | RNVC: 2
VDO-SR100: RNCC: 5 | RNVC: 2

23 Jan 1984

5120-12-151-6512
Mechanical Puller Step Plate

121516512
23111-7156.06: RNCC: 2 | RNVC: 2
23111-7156.06: RNCC: 3 | RNVC: 2
23111-7156-06: RNCC: 5 | RNVC: 9
23111-7156.06: RNCC: 5 | RNVC: 9
23111-7156-06: RNCC: 5 | RNVC: 9
23111-7156-06: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-173-2914
Montage- Hebel

121732914
NO PRIMARY REF 12-173-2914: RNCC: 3 | RNVC: 2
3680-430: RNCC: 5 | RNVC: 9

3 Apr 1978

5120-12-153-2088
Piston Ring Compressor

121532088
CH279-19NM: RNCC: 3 | RNVC: 2
1201 9499: RNCC: 5 | RNVC: 2
A26-50-94: RNCC: 5 | RNVC: 9
CH279-19NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-142-2145
Hand Helical Spring Puller Hook

121422145
TFS49-99008: RNCC: 3 | RNVC: 2
TFS49-99008: RNCC: 5 | RNVC: 9
TFS49-99008: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-150-1561
Schluessel

121501561
C20326-A64-B75: RNCC: 3 | RNVC: 2
C20326A64B75: RNCC: 5 | RNVC: 2
TFS70-12202: RNCC: 5 | RNVC: 2
TFS70-12202: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-183-4348
Abziehglocke

121834348
4199437: RNCC: 3 | RNVC: 2
SK3125-2-04: RNCC: 5 | RNVC: 2

17 Apr 1980

5120-12-144-6302
Mechanical Puller Forcing Screw

121446302
25704-360380-00-0: RNCC: 3 | RNVC: 2
25704-360380.00.0: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-336-5496
Hand Terminal Crimping Tool

123365496
430024: RNCC: 3 | RNVC: 2
05L8380: RNCC: 3 | RNVC: 2
3-0856: RNCC: 3 | RNVC: 2
4390: RNCC: 3 | RNVC: 2
571-230: RNCC: 3 | RNVC: 2
45652: RNCC: 5 | RNVC: 2
5710001: RNCC: 5 | RNVC: 2
T3695: RNCC: 5 | RNVC: 9

25 Nov 1994

5120-12-370-7561
Spanner Wrench

123707561
5176340: RNCC: 3 | RNVC: 2

18 Dec 2006

5120-12-381-8866
Ratchet Wrench Set

123818866
503.4266: RNCC: 3 | RNVC: 2

14 Apr 2010

5120-12-353-8051
Aufp Preszwerkzeug

123538051
030899: RNCC: 3 | RNVC: 2

11 May 2001

5120-12-371-2244
Socket Wrench Screwdriver Attachment

123712244
3230-XZNL 10X100: RNCC: 3 | RNVC: 2

1 Mar 2007

5120-12-133-3976
Screwdriver Bit

121333976
55M-10.0: RNCC: 3 | RNVC: 2
7761-10: RNCC: 5 | RNVC: 9
6990M10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-157-7522
Verlaengerung

121577522
5505890061/00: RNCC: 3 | RNVC: 2
CH1611-19: RNCC: 3 | RNVC: 2
550589006100: RNCC: 5 | RNVC: 2
6-086-440-9002-5: RNCC: 5 | RNVC: 2
550589006100: RNCC: 5 | RNVC: 2
12158148: RNCC: 5 | RNVC: 2
CH1611-19: RNCC: 5 | RNVC: 9
6.086.440.9002.5: RNCC: 5 | RNVC: 9
6-086-440-9002-5: RNCC: 5 | RNVC: 9
550 589 00 61/00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-0835
Mechanical Puller

123640835
463589003300: RNCC: 3 | RNVC: 2

19 Aug 2004

5120-12-326-0074
Mechanical Puller Step Plate

123260074
2500194-992400.003.0: RNCC: 2 | RNVC: 2
2500194-992400.003.0: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-196-1650
Mechanical Puller

121961650
35-930F019: RNCC: 3 | RNVC: 2

7 Jun 1983

5120-12-129-1386

5120-12-140-3192
Craftsman's Tweezers

121403192
TL5180-0059-7: RNCC: 2 | RNVC: 2
5013-200-S: RNCC: 3 | RNVC: 2
5516-200MM: RNCC: 5 | RNVC: 9
5180-0059-7: RNCC: 5 | RNVC: 9
5180-059-7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-7297
Electronic Equipment Alignment Tool

121537297
5552: RNCC: 3 | RNVC: 2
1-M 380-2: RNCC: 3 | RNVC: 2
137855: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-338-4399
Flat Tip Screwdriver

123384399
05018266001: RNCC: 3 | RNVC: 2
932A-1,2X7,0X125: RNCC: 5 | RNVC: 2
18266: RNCC: 5 | RNVC: 9

10 Jul 1995

5120-12-124-1339
Erdankerhe Hebearm

121241339
NO PRIMARY REF 12-124-1339: RNCC: 3 | RNVC: 2
830007-15ARM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-2792
Mechanical Puller

121772792
2300002-269080.000: RNCC: 2 | RNVC: 2
2300002-269080.000: RNCC: 3 | RNVC: 2
2300002-269080: RNCC: 5 | RNVC: 9

24 Jan 1979

5120-12-313-5094
Vise Jaw Caps

123135094
10836: RNCC: 3 | RNVC: 2
10836: RNCC: 5 | RNVC: 9
10836-160 MM: RNCC: 5 | RNVC: 9

8 Apr 1988

5120-12-340-4485
Auswechs Klemmteil

123404485
62063801: RNCC: 3 | RNVC: 2

16 Apr 1996

5120-12-164-6326
Spanner Wrench

121646326
264-370: RNCC: 3 | RNVC: 2
264-370: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-171-0684
Auszieher

121710684
80996020011: RNCC: 3 | RNVC: 2
355589016300: RNCC: 3 | RNVC: 2
7005165: RNCC: 5 | RNVC: 2
7083636: RNCC: 5 | RNVC: 2
80.99602-0011: RNCC: 5 | RNVC: 2
355 589 01 63/00: RNCC: 5 | RNVC: 2
3555890163/00: RNCC: 5 | RNVC: 2
355 589 01 63/00: RNCC: 5 | RNVC: 2
355 589 01 63/00: RNCC: 5 | RNVC: 2
355 589 01 63 00: RNCC: 5 | RNVC: 2

5 Sep 1977

5120-12-177-7675
Torque Wrench Adapter

121777675
TM0-091177: RNCC: 3 | RNVC: 2

19 Feb 1979

5120-12-153-7965
Schluesseleinsatz

121537965
CH1773-19: RNCC: 3 | RNVC: 2
560589126100: RNCC: 5 | RNVC: 2
5605891261/00: RNCC: 5 | RNVC: 2
CH1773-19: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-5765
Aligning Punch

121905765
6008R-1700.01.0: RNCC: 2 | RNVC: 2
6008R-1700.01.0: RNCC: 3 | RNVC: 2
6008R-1700.01.0: RNCC: 5 | RNVC: 2
6008R-1700.01.0: RNCC: 5 | RNVC: 9

7 Dec 1981

5120-12-121-8252
Open End Wrench

121218252
TL5120-0001-360Z: RNCC: 2 | RNVC: 2
156-7-32X15-64: RNCC: 5 | RNVC: 9
5120-0001-360: RNCC: 5 | RNVC: 9
TL5120-0001-360: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-394-2601
Socket Wrench Screwdriver Attachment

123942601
2003538: RNCC: 3 | RNVC: 2
IN 32 L 22-155: RNCC: 5 | RNVC: 2
2003538: RNCC: 5 | RNVC: 2
4010886876442: RNCC: 5 | RNVC: 2
IN 32 L 22-155: RNCC: 5 | RNVC: 2
4010886876442: RNCC: 5 | RNVC: 2

14 Nov 2013

5120-12-127-0443

5120-12-181-5051
Face Spanner Wrench Socket

121815051
731589000700: RNCC: 3 | RNVC: 2
312589060700: RNCC: 5 | RNVC: 9

26 Nov 1979

5120-12-126-3098

5120-12-363-9687
Bearing And Bushing Inserter

123639687
T671P5002120: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-140-9708
Montagebuchse Pende

121409708
2895-021: RNCC: 3 | RNVC: 2
2895021: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-388-9304
Mechanical Puller Attachment

123889304
320 005 20: RNCC: 3 | RNVC: 2
80.99602-0183: RNCC: 5 | RNVC: 2
80996020183: RNCC: 5 | RNVC: 2

8 May 2012

5120-12-355-9083
Mechanical Puller

123559083
J0433105D127-002A0: RNCC: 3 | RNVC: 2

4 Jan 2002

5120-12-141-9656
Mechanical Puller Attachment

121419656
Y218-07: RNCC: 3 | RNVC: 2
506: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-133-3986
Screwdriver Bit

121333986
NO PRIMARY REF 12-133-3986: RNCC: 3 | RNVC: 2
7090M8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-350-2713
Bl Ausbeulwerkzeug

123502713
065/RS: RNCC: 3 | RNVC: 2

9 Mar 2000

5120-12-127-2813
Mechanical Puller

121272813
WU54: RNCC: 3 | RNVC: 2
WU54: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-316-9118
Torque Wrench Adapter

123169118
21/5-32: RNCC: 3 | RNVC: 2

22 Feb 1989

5120-12-126-2252
Plier Wrench

121262252
5880004: RNCC: 3 | RNVC: 2
53422175: RNCC: 3 | RNVC: 2
137-7: RNCC: 3 | RNVC: 2
4945-175: RNCC: 5 | RNVC: 2
53422-175: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-357-6917
Torque Wrench Adapter

123576917
3021009100: RNCC: 3 | RNVC: 2
103328: RNCC: 5 | RNVC: 2
21-0-10: RNCC: 5 | RNVC: 9
21/0-10: RNCC: 5 | RNVC: 9

15 Jul 2002

5120-12-180-1614
Screwdriver Bit

121801614
3041 8: RNCC: 3 | RNVC: 2
991-8: RNCC: 3 | RNVC: 2
54CV8: RNCC: 3 | RNVC: 2
50-34-8: RNCC: 3 | RNVC: 2
F30022208: RNCC: 5 | RNVC: 2
03090008: RNCC: 5 | RNVC: 2
5069614: RNCC: 5 | RNVC: 2
00050340383: RNCC: 5 | RNVC: 2
698-422-0020: RNCC: 5 | RNVC: 2
2487180010: RNCC: 5 | RNVC: 9

27 Aug 1979

5120-12-374-4261
Hand Yoke Riveter

123744261
2875RT80-1AY: RNCC: 3 | RNVC: 2

15 Feb 2008

5120-12-305-7612
Spanner Wrench

123057612
TOR-1016-000A0-001: RNCC: 3 | RNVC: 2
TOR-1016-000-AO: RNCC: 5 | RNVC: 9

10 Dec 1985

5120-12-175-9602
Flat Tip Screwdriver

121759602
NO PRIMARY REF 12-175-9602: RNCC: 3 | RNVC: 2
131488: RNCC: 5 | RNVC: 9
8000-13X200: RNCC: 5 | RNVC: 9
8000-2-12-200: RNCC: 5 | RNVC: 9
8000-2X12X200: RNCC: 5 | RNVC: 9

30 Oct 1978

5120-12-314-6333
Kugelgel Spannfusz

123146333
026-951521.000.0: RNCC: 3 | RNVC: 2
6900077-026-951521.000.0: RNCC: 5 | RNVC: 2
6900077-026-951521.000.0: RNCC: 5 | RNVC: 9

23 Jul 1988

5120-12-364-0834
Seal Inserter

123640834
463589001500: RNCC: 3 | RNVC: 2

19 Aug 2004

5120-12-332-8078
Op Montierwerkzeug

123328078
532113-8126.903: RNCC: 3 | RNVC: 2
532113-8126.903: RNCC: 5 | RNVC: 9

22 Sep 1993

5120-12-092-3884

5120-12-189-4693
Bearing And Bushing Inserter

121894693
312589031400: RNCC: 3 | RNVC: 2

29 Sep 1981

5120-12-092-2288

5120-12-139-7691
Schluessel

121397691
3125890309: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-336-9797
Screwdriver Bit

123369797
05072865001: RNCC: 3 | RNVC: 2
52952-070: RNCC: 3 | RNVC: 2
072865: RNCC: 3 | RNVC: 9
2130S-10: RNCC: 5 | RNVC: 2
72865: RNCC: 5 | RNVC: 9

4 Jan 1995

5120-12-146-7539
Ausziehvorrichtung

121467539
2052LIG22: RNCC: 3 | RNVC: 2
65-7723-826-00LV: RNCC: 5 | RNVC: 2
65-7723-826-00: RNCC: 5 | RNVC: 2
2052: RNCC: 5 | RNVC: 9
LM-4808: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-140-2766
Jack Elevating Block

121402766
2843-032: RNCC: 3 | RNVC: 2
2843032: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-167-2232
Einfuehrungsbolzen

121672232
14021-14002W2: RNCC: 3 | RNVC: 2

1 Dec 1976

5120-12-337-2060
Socket Wrench Crowfoot Attachment

123372060
11.49001-0421: RNCC: 3 | RNVC: 2
009.040: RNCC: 5 | RNVC: 2
11.49001-0421: RNCC: 5 | RNVC: 9
009.040: RNCC: 5 | RNVC: 9

1 Feb 1995

5120-12-384-1609
Rotat Holding Tool

123841609
WM 22827: RNCC: 3 | RNVC: 2

27 Jan 2011

5120-12-185-9696
Hand Terminal Crimping Tool

121859696
101906: RNCC: 3 | RNVC: 9

13 Nov 1980

5120-12-393-8476
Mounting To Sleeve

123938476
7077745: RNCC: 3 | RNVC: 2

16 Oct 2013

5120-12-345-3061
Seal Inserter

123453061
F3 0272815: RNCC: 3 | RNVC: 2

2 Mar 1998

5120-12-368-8745
Screw Extractor

123688745
260 002 3: RNCC: 3 | RNVC: 2
01.42.41.79: RNCC: 5 | RNVC: 2

3 May 2006

5120-12-350-3242
Drive Pin Punch

123503242
5600023-990100.002.0: RNCC: 2 | RNVC: 2
5600023-990100.002.0: RNCC: 3 | RNVC: 2

15 Mar 2000

5120-12-199-0788
Hand Terminal Crimping Tool

121990788
R282223: RNCC: 3 | RNVC: 2
282216: RNCC: 5 | RNVC: 2

23 Mar 1984

5120-12-146-2338
Hand Verlaengerung

121462338
23114-4177-00: RNCC: 2 | RNVC: 2
23114-4177-00: RNCC: 5 | RNVC: 2
23114-4177-00: RNCC: 5 | RNVC: 9
23114-4177-00: RNCC: 5 | RNVC: 9
23114-4177-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-322-5264
Woven Cable Grip

123225264
153 197 01: RNCC: 3 | RNVC: 2
153-197-01: RNCC: 5 | RNVC: 2

29 Aug 1990

5120-12-178-4471
Open End Box Wrench

121784471
612-13X15: RNCC: 3 | RNVC: 9
1410110006: RNCC: 5 | RNVC: 9

20 Apr 1979

5120-12-314-5812
Spanner Wrench

123145812
H3-721-48144-7: RNCC: 3 | RNVC: 2
HL721-48144-7: RNCC: 5 | RNVC: 2
HL721-48144-7: RNCC: 5 | RNVC: 9
H3-721-48144-7: RNCC: 5 | RNVC: 9
H3-721-48144-7: RNCC: 5 | RNVC: 9

20 Jul 1988

5120-12-307-6629
Socket Wrench Socket

123076629
W32-007-2: RNCC: 3 | RNVC: 2

14 Jul 1986

5120-12-314-0471
Socket Wrench Socket

123140471
2300109-970220.001.0: RNCC: 2 | RNVC: 2
2300109-970220.001.0: RNCC: 3 | RNVC: 2
1100S-32BW: RNCC: 3 | RNVC: 2
5120700032: RNCC: 5 | RNVC: 2

19 Apr 1989

5120-12-171-3159
Einpreszwerkzeug

121713159
VG95211-ML-121713159: RNCC: 2 | RNVC: 2
105-31781W5: RNCC: 3 | RNVC: 2

29 Sep 1977

5120-12-123-5905
Socket Wrench Extension

121235905
065608: RNCC: 3 | RNVC: 2
65-5VLS: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-380-5297
Spanner Wrench

123805297
1878256898: RNCC: 3 | RNVC: 2

5 Nov 2009

5120-12-176-4481
Montagewerkzeug

121764481
VW185: RNCC: 3 | RNVC: 2

27 Nov 1978

5120-12-150-3914
Spanner Wrench

121503914
1X46090035: RNCC: 3 | RNVC: 2
V90035-1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-332-9835
Socket Wrench Screwdriver Attachment

123329835
8801-6: RNCC: 3 | RNVC: 2

18 Oct 1993

5120-12-372-7556
Spatula

123727556
95/4: RNCC: 3 | RNVC: 2

17 Aug 2007

5120-12-127-4674
Lamp Extractor

121274674
835B1-3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-176-1100
Ausdrueckvorrichtun

121761100
10-550: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-322-7297
Box Wrench

123227297
GORDON4730406: RNCC: 3 | RNVC: 2

17 Sep 1990

5120-12-339-3021
Mechanical Puller

123393021
60382391: RNCC: 3 | RNVC: 2
60382301162: RNCC: 5 | RNVC: 9
63082391.162: RNCC: 5 | RNVC: 9
63092300902: RNCC: 5 | RNVC: 9

7 Nov 1995

5120-12-182-9275

5120-12-374-5403
Pruef- Spiegelsatz

123745403
JD-TELE-SET: RNCC: 3 | RNVC: 2

25 Feb 2008

5120-12-307-9672
Blindni Mundstueck

123079672
GBM30-351: RNCC: 3 | RNVC: 2
7222513: RNCC: 5 | RNVC: 2
351: RNCC: 5 | RNVC: 2

14 Aug 1986

5120-12-314-7032
Bearing And Bushing Inserter And Remover

123147032
C11.49021-0260: RNCC: 3 | RNVC: 2
11.49021-0260: RNCC: 5 | RNVC: 2
11.49021-0260: RNCC: 5 | RNVC: 2

30 Jul 1988

5120-12-364-9795
Mechanical Finger

123649795
2-157: RNCC: 3 | RNVC: 2

19 Nov 2004

5120-12-344-7921
Dreh Haltewerkzeug

123447921
99360551: RNCC: 3 | RNVC: 2

9 Dec 1997

5120-12-156-7180
Spanner Wrench

121567180
101706101: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-362-4011
Socket Head Screw Key

123624011
T4881XESD07: RNCC: 3 | RNVC: 2

17 Feb 2004

5120-12-070-0151

5120-12-026-1722

5120-12-387-9618
Bearing And Bushing Inserter

123879618
80996040243: RNCC: 3 | RNVC: 2
80.99604-0243: RNCC: 5 | RNVC: 2

13 Feb 2012

5120-12-193-0238
Montagewerkzeug

121930238
CH 1772/3 NM: RNCC: 3 | RNVC: 2
CH1772-3NM: RNCC: 5 | RNVC: 2
CH 1772/3 NM: RNCC: 5 | RNVC: 9
CH1772-3NM: RNCC: 5 | RNVC: 9

15 Jun 1982

5120-12-305-2548
Socket Wrench Handle Bar

123052548
NO PRIMARY REF 12-305-2548: RNCC: 3 | RNVC: 2
26S-568-C: RNCC: 5 | RNVC: 9
26S-568-C: RNCC: 5 | RNVC: 9

15 Oct 1985

5120-12-154-1010
Grundschlu Einsatz

121541010
839589380700: RNCC: 3 | RNVC: 2
CH1775-4NM: RNCC: 5 | RNVC: 2
CH1775-4NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-369-7186
Torque Wrench Adapter

123697186
447-10: RNCC: 3 | RNVC: 2
02181010: RNCC: 5 | RNVC: 2

11 Aug 2006

5120-12-186-7361
Bearing And Bushing Inserter

121867361
NO PRIMARY REF 12-186-7361: RNCC: 3 | RNVC: 2
412010: RNCC: 5 | RNVC: 2
412010: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-121-4928
Box Wrench

121214928
TL5120-0078-200: RNCC: 2 | RNVC: 2
4-46X50: RNCC: 3 | RNVC: 2
DIN837-B46X50: RNCC: 5 | RNVC: 1
TVA5120-2-263-032.1.1.35: RNCC: 5 | RNVC: 2
237299: RNCC: 5 | RNVC: 9
46X50DIN837: RNCC: 5 | RNVC: 9
4-46X50: RNCC: 5 | RNVC: 9
46X50DIN837GALNI8: RNCC: 5 | RNVC: 9
DIN837-46X50: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-4930
Sheet Metalworking Stake

121264930
53626030: RNCC: 3 | RNVC: 2
5319-40: RNCC: 5 | RNVC: 2
53626-3: RNCC: 5 | RNVC: 9
631B154-40: RNCC: 5 | RNVC: 9
5071-2-40: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-336-9795
Screwdriver Bit

123369795
05072855001: RNCC: 3 | RNVC: 2
52952-050: RNCC: 3 | RNVC: 2
072855: RNCC: 3 | RNVC: 9
2130S-6: RNCC: 5 | RNVC: 2
72855: RNCC: 5 | RNVC: 9

4 Jan 1995

5120-12-362-1144
Electrical Contact Remover

123621144
80996060603: RNCC: 3 | RNVC: 2
80996060419: RNCC: 5 | RNVC: 9

12 Jan 2004

5120-12-353-2081
Socket Wrench Extension

123532081
CBD45071P01: RNCC: 3 | RNVC: 2

12 Feb 2001

5120-12-381-7359
Socket Wrench Set

123817359
888N: RNCC: 3 | RNVC: 2
4000896042623: RNCC: 5 | RNVC: 2

24 Mar 2010

5120-12-347-5842
Socket Wrench Socket

123475842
870-TXE7: RNCC: 3 | RNVC: 2
45TX-E7: RNCC: 3 | RNVC: 2
00.47.49.93: RNCC: 5 | RNVC: 2

11 Jan 1999

5120-12-164-7518
Open End Wrench

121647518
NO PRIMARY REF 12-164-7518: RNCC: 3 | RNVC: 2
104594: RNCC: 5 | RNVC: 9
1953M60X65: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-4651
Rack Bar Jack

121714651
5120-004: RNCC: 2 | RNVC: 9
JUMB07-5T: RNCC: 3 | RNVC: 9
X077: RNCC: 5 | RNVC: 9

13 Oct 1977

5120-12-145-9296
Box Wrench

121459296
260059000000: RNCC: 3 | RNVC: 2
260059000000: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-368-9157
Flat Tip Screwdriver

123689157
66122: RNCC: 3 | RNVC: 2
01.74.99.39: RNCC: 5 | RNVC: 2

5 May 2006

5120-12-156-3102
Schluessel

121563102
109103001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-357-7260
Seal Inserter

123577260
9249454000: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-371-9184
Hand Terminal Crimping Tool

123719184
90384-1: RNCC: 3 | RNVC: 2

30 May 2007

5120-12-335-4088
Mechanical Puller

123354088
0851 6866: RNCC: 3 | RNVC: 2
8516866: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-138-5635

5120-12-166-2284
Spanner Wrench

121662284
264-270: RNCC: 3 | RNVC: 2

13 Aug 1976

5120-12-331-3513
Socket Wrench

123313513
120090: RNCC: 3 | RNVC: 2
8220997: RNCC: 5 | RNVC: 2
8411037: RNCC: 5 | RNVC: 2

27 Apr 1993

5120-12-146-5905
Spanner Wrench

121465905
23182-9750.04: RNCC: 2 | RNVC: 2
23182-9750.04: RNCC: 3 | RNVC: 2
23182-9750-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-369-6089
Hand Terminal Crimping Tool

123696089
0114 44001: RNCC: 3 | RNVC: 2
80.99625-0061: RNCC: 5 | RNVC: 2
80996250061: RNCC: 5 | RNVC: 2

1 Aug 2006

5120-12-186-6028
Torque Wrench Adapter

121866028
TL5120-0086-990: RNCC: 2 | RNVC: 2
30/DCA-1/2: RNCC: 3 | RNVC: 2
735/20: RNCC: 3 | RNVC: 2
6404-1S: RNCC: 3 | RNVC: 2
6264400001: RNCC: 5 | RNVC: 2
65760-2-1/2: RNCC: 5 | RNVC: 9
7852-1: RNCC: 5 | RNVC: 9
6404: RNCC: 5 | RNVC: 9
735-20: RNCC: 5 | RNVC: 9
F30027341: RNCC: 5 | RNVC: 9

21 Jan 1981

5120-12-140-1149

5120-12-173-8185
Swivel Knob Jeweler's Screwdriver Set

121738185
2003F5: RNCC: 3 | RNVC: 9
106037: RNCC: 5 | RNVC: 2
66930: RNCC: 5 | RNVC: 2

16 May 1978

5120-12-132-4310

5120-12-188-7196
Abstuetzung

121887196
406589086300: RNCC: 3 | RNVC: 2

27 Jul 1981

5120-12-153-5055
Spanner Wrench

121535055
510195-240-00: RNCC: 2 | RNVC: 2
169102201: RNCC: 3 | RNVC: 2
E169102201: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-090-1452

5120-12-126-1335

5120-12-167-9766
Open End Wrench

121679766
NO PRIMARY REF 12-167-9766: RNCC: 3 | RNVC: 2
229458: RNCC: 5 | RNVC: 9
8M12: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-172-9108
Hebel

121729108
VG95211-ML-121729108: RNCC: 2 | RNVC: 2
1X56 136 643-2: RNCC: 3 | RNVC: 2
1X56136643-2: RNCC: 5 | RNVC: 9

2 Mar 1978

5120-12-300-1291
Swivel Knob Jeweler's Screwdriver

123001291
C407-Z4-C32: RNCC: 3 | RNVC: 2
527/ISOL: RNCC: 5 | RNVC: 9
V22199-Z-C20: RNCC: 5 | RNVC: 9
V22199ZC20: RNCC: 5 | RNVC: 9

5 Jul 1984

5120-12-181-9703
Socket Wrench

121819703
81991628527: RNCC: 3 | RNVC: 2
81.99162-8527: RNCC: 3 | RNVC: 2

28 Dec 1979

5120-12-326-1866
Cross Tip Screwdriver

123261866
66 830 2/250: RNCC: 3 | RNVC: 2

15 Aug 1991

5120-12-163-6080
Einbauwerkzeug

121636080
VG95211-ML-121636080: RNCC: 2 | RNVC: 2
105-14181W2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-176-1112
Huelse

121761112
VW522: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-318-6032
Mechanical Puller

123186032
10201: RNCC: 3 | RNVC: 2
250-251/10201: RNCC: 5 | RNVC: 2
6130R159: RNCC: 5 | RNVC: 2
HZTL415052R1: RNCC: 5 | RNVC: 2

31 Jul 1989

5120-12-127-2818
Mechanical Puller

121272818
WU23A: RNCC: 3 | RNVC: 2
WU23A: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-391-2863
Cross Tip Screwdriver

123912863
159.1029: RNCC: 3 | RNVC: 2

1 Mar 2013

5120-12-121-1105

5120-12-194-4814
Socket Wrench

121944814
P10: RNCC: 3 | RNVC: 2
PS120-P10: RNCC: 5 | RNVC: 2

8 Nov 1982

5120-12-137-4879
Fuse Puller

121374879
NO PRIMARY REF 12-137-4879: RNCC: 3 | RNVC: 2
30921: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-5045
Spanner Wrench

123405045
264-1267: RNCC: 3 | RNVC: 2
163159: RNCC: 5 | RNVC: 2

24 Apr 1996

5120-12-306-3091
Socket Wrench

123063091
602074/35: RNCC: 3 | RNVC: 2
S03602074/35: RNCC: 3 | RNVC: 2
S03602074/35: RNCC: 5 | RNVC: 9

18 Feb 1986

5120-12-303-2791
Spanner Wrench

123032791
10-020-001/01: RNCC: 3 | RNVC: 2
606589004000: RNCC: 5 | RNVC: 2

13 Mar 1985

5120-12-378-5681
Plier Clamp

123785681
0703 821 300: RNCC: 3 | RNVC: 2
86 03 300: RNCC: 3 | RNVC: 2
3966082: RNCC: 5 | RNVC: 2
4003773040224: RNCC: 5 | RNVC: 2
8603300: RNCC: 5 | RNVC: 9

22 Apr 2009

5120-12-380-5209
Socket Wrench Socket

123805209
1878256891: RNCC: 3 | RNVC: 2

5 Nov 2009

5120-12-364-3481
Craftsman's Tweezers

123643481
77500001-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-337-5542
Torque Wrench Adapter

123375542
7395201: RNCC: 3 | RNVC: 2

13 Mar 1995

5120-12-123-5870
Open End Wrench

121235870
NO PRIMARY REF 12-123-5870: RNCC: 3 | RNVC: 2
02080: RNCC: 5 | RNVC: 9
450V14X16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-332-0178
Hand Hammer

123320178
102030: RNCC: 3 | RNVC: 9
C341-1000: RNCC: 3 | RNVC: 9

15 Jul 1993

5120-12-149-5858
Socket Wrench

121495858
120/08: RNCC: 3 | RNVC: 2
105193: RNCC: 5 | RNVC: 9
1937M13: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-8017
Stud Remover

123308017
4988031: RNCC: 3 | RNVC: 2

10 Feb 1993

5120-12-363-8714
Bearing And Bushing Inserter

123638714
T670P5001207: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-044-4933

5120-12-182-4699
Socket Wrench Crowfoot Attachment

121824699
NO PRIMARY REF 12-182-4699: RNCC: 3 | RNVC: 2
1951M27: RNCC: 5 | RNVC: 9

6 Feb 1980

5120-12-311-2552
Spanner Wrench

123112552
57408-645: RNCC: 3 | RNVC: 2
KB-57408-645: RNCC: 5 | RNVC: 2

11 Aug 1987

5120-12-182-1225
Griff

121821225
5230-200-4: RNCC: 2 | RNVC: 2
W2358-30-4: RNCC: 2 | RNVC: 2
W2358-30-4: RNCC: 3 | RNVC: 2
5230-200-4: RNCC: 5 | RNVC: 2

14 Jan 1980

5120-12-167-0419
Hydraulic Jack Handle

121670419
310.036.7: RNCC: 3 | RNVC: 2
0005832545: RNCC: 5 | RNVC: 2
34455: RNCC: 5 | RNVC: 9
34455-9: RNCC: 5 | RNVC: 9
34455.9: RNCC: 5 | RNVC: 9

11 Nov 1976

5120-12-356-4569
Mechanical Puller

123564569
223-GH: RNCC: 3 | RNVC: 2

1 Mar 2002

5120-12-123-5214
Box Wrench

121235214
475MM22X27: RNCC: 3 | RNVC: 2
630-22X27: RNCC: 5 | RNVC: 9
20-22X27: RNCC: 5 | RNVC: 9
41042227: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-192-7642
Screwdriver Bit

121927642
CH2522/9: RNCC: 3 | RNVC: 2
560589110800: RNCC: 5 | RNVC: 2
CH2522/9: RNCC: 5 | RNVC: 9

19 May 1982

5120-12-185-4703
Socket Head Screw Key

121854703
05022920001: RNCC: 3 | RNVC: 2
352-1/4: RNCC: 5 | RNVC: 2
952-1-4: RNCC: 5 | RNVC: 9

9 Oct 1980

5120-12-368-1972
Socket Wrench Socket

123681972
02410028-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-171-1581
Vorrichtung

121711581
VG95211-ML-121711581: RNCC: 2 | RNVC: 2
105-15103W6: RNCC: 3 | RNVC: 2

12 Sep 1977

5120-12-190-9038
Spanner Wrench

121909038
0003-3998-000: RNCC: 3 | RNVC: 2
000-3998-000: RNCC: 5 | RNVC: 2
000-3998-000: RNCC: 5 | RNVC: 9
0003-3998-000: RNCC: 5 | RNVC: 9

21 Dec 1981

5120-12-312-4824
Schluessel

123124824
620589006300: RNCC: 3 | RNVC: 2
1X56 136 573: RNCC: 3 | RNVC: 2
1X56136573: RNCC: 5 | RNVC: 2

12 Jan 1988

5120-12-185-8525
Mechanical Puller

121858525
4900059-755120-000-0: RNCC: 3 | RNVC: 2
4900059-755120.000.0: RNCC: 3 | RNVC: 2
755120-000-0: RNCC: 5 | RNVC: 2

4 Nov 1980

5120-12-322-4402
Torque Wrench

123224402
T0854-38R: RNCC: 3 | RNVC: 2
T0854/38/R: RNCC: 5 | RNVC: 2

22 Aug 1990

5120-12-311-4338
Spanner Wrench

123114338
4118598: RNCC: 3 | RNVC: 2
1.83-440: RNCC: 5 | RNVC: 2

2 Sep 1987

5120-12-307-5754
Mechanical Puller

123075754
CF 491 617 AE: RNCC: 2 | RNVC: 2
CF 491 617 AE: RNCC: 3 | RNVC: 2
CF 491 617 AE: RNCC: 3 | RNVC: 2

3 Jul 1986

5120-12-126-2598
Jewelers' Pliers

121262598
2787R: RNCC: 3 | RNVC: 2
106819: RNCC: 5 | RNVC: 2
1068196: RNCC: 5 | RNVC: 2
53028030: RNCC: 5 | RNVC: 9
2787RMITFEDER: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-367-9402
Screwdriver Bit Set

123679402
059295: RNCC: 3 | RNVC: 2

8 Nov 2005

5120-12-094-5844

5120-12-345-3682
Hand Material Handling Hook

123453682
009-017.400-017W1: RNCC: 3 | RNVC: 2

5 Mar 1998

5120-12-382-7486
Drive Pin Punch

123827486
70070003-TCS: RNCC: 3 | RNVC: 2

4 Aug 2010

5120-12-309-2608
Ge Montierwerkzeug

123092608
1X56 136 970: RNCC: 3 | RNVC: 2
1X56136970: RNCC: 5 | RNVC: 2
8209819: RNCC: 5 | RNVC: 9

7 Jan 1987

5120-12-183-9528
Socket Wrench

121839528
90433309-00: RNCC: 3 | RNVC: 2
66.3507.664.00-A001: RNCC: 5 | RNVC: 2
9043 3 309-00: RNCC: 5 | RNVC: 2
9043 3 309-00: RNCC: 5 | RNVC: 9
90433309-00: RNCC: 5 | RNVC: 9

3 Jun 1980

5120-12-123-5055
Open End Wrench

121235055
200-10X12: RNCC: 3 | RNVC: 2
10X12-895: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-383-6258
Torque Wrench

123836258
AS576-1833AR-01: RNCC: 3 | RNVC: 2

16 Nov 2010

5120-12-177-2185
Socket Wrench Socket

121772185
NO PRIMARY REF 12-177-2185: RNCC: 3 | RNVC: 2
40EL7BA: RNCC: 5 | RNVC: 9
01720092: RNCC: 5 | RNVC: 9

19 Jan 1979

5120-12-362-1139
Crimpzange Kopf

123621139
118509101: RNCC: 3 | RNVC: 2
CSV10-0102: RNCC: 5 | RNVC: 2
80996250102: RNCC: 5 | RNVC: 2
80996250053: RNCC: 5 | RNVC: 9

12 Jan 2004

5120-12-155-9513
Socket Wrench Socket

121559513
NM291-10: RNCC: 3 | RNVC: 2
NM291-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-9793
Inspection Mirror

123649793
T5913 32: RNCC: 3 | RNVC: 2

19 Nov 2004

5120-12-357-8419
Combination Box And Open End Wrench Set

123578419
714251100: RNCC: 3 | RNVC: 2

31 Jul 2002

5120-12-381-7935
Retaining Ring Pliers

123817935
0714577111: RNCC: 3 | RNVC: 2
A0714 577 111: RNCC: 5 | RNVC: 2
391129163108: RNCC: 6 | RNVC: 9
49412: RNCC: 6 | RNVC: 9

31 Mar 2010

5120-12-172-8183
Bodenpla Hebestange

121728183
VG95211-ML-121728183: RNCC: 2 | RNVC: 2
1X56 136 240: RNCC: 3 | RNVC: 2
1X56136240: RNCC: 5 | RNVC: 9

22 Feb 1978

5120-12-314-6500
Spanner Wrench

123146500
E11.49066-0134: RNCC: 3 | RNVC: 2

26 Jul 1988

5120-12-121-6478

5120-12-374-4251
Hand Yoke Riveter

123744251
2875HT60-1AY: RNCC: 3 | RNVC: 2

15 Feb 2008

5120-12-135-5043
Chain Type Ratchet Lever Puller

121355043
TL5120-0047-750: RNCC: 2 | RNVC: 2
F3.1.1-075: RNCC: 5 | RNVC: 2
5120-047-750: RNCC: 5 | RNVC: 2
ZUGHUB750: RNCC: 5 | RNVC: 9
711F001: RNCC: 5 | RNVC: 9
5120-20002: RNCC: 6 | RNVC: 9
5120-20002: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-313-6563
Bearing And Bushing Inserter

123136563
3013: RNCC: 3 | RNVC: 2

22 Apr 1988

5120-12-324-6058
Screwdriver Bit

123246058
52222031: RNCC: 3 | RNVC: 2

6 Mar 1991

5120-12-344-6438
Seal Inserter

123446438
99374070: RNCC: 3 | RNVC: 2

19 Nov 1997

5120-12-341-1154
Socket Wrench Set

123411154
7819DZ: RNCC: 3 | RNVC: 2
1831516: RNCC: 5 | RNVC: 2

30 Jul 1996

5120-12-169-3191
Halter

121693191
67032300: RNCC: 3 | RNVC: 2

4 May 1977

5120-12-123-5449
Socket Wrench

121235449
3359002002: RNCC: 3 | RNVC: 2
023E002-11: RNCC: 3 | RNVC: 2
A2273: RNCC: 5 | RNVC: 2
583303956: RNCC: 5 | RNVC: 2
3303956: RNCC: 5 | RNVC: 2
583303956: RNCC: 5 | RNVC: 9
583303956: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-351-4402
Face Spanner Wrench Socket

123514402
7633 798 154: RNCC: 3 | RNVC: 2

26 Jul 2000

5120-12-383-1085
Socket Wrench Socket

123831085
T291P0005103: RNCC: 3 | RNVC: 2

14 Sep 2010

5120-12-342-1972
Spanner Wrench

123421972
5510401: RNCC: 3 | RNVC: 2

2 Jan 1997

5120-12-140-2922

5120-12-123-5246
Box Wrench

121235246
DIN837-A36X41: RNCC: 2 | RNVC: 2
A36X41DIN837: RNCC: 5 | RNVC: 2
22-36X41: RNCC: 5 | RNVC: 9
41063641: RNCC: 5 | RNVC: 9
A36X41DIN837GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-2690
Lamp Extractor

121902690
C39407-A26-C1: RNCC: 3 | RNVC: 2

16 Nov 1981

5120-12-175-8965
Spanner Wrench

121758965
750.00-01-00-01-088: RNCC: 3 | RNVC: 2
750-00-010001088: RNCC: 5 | RNVC: 2

25 Oct 1978

5120-12-133-4527

5120-12-168-2715
Screw Thread Insert Tang Breakoff Tool

121682715
01586050000: RNCC: 3 | RNVC: 2
01581050000: RNCC: 5 | RNVC: 9
01584050000: RNCC: 5 | RNVC: 9

4 Mar 1977

5120-12-316-2293
Bung Wrench

123162293
6380983: RNCC: 3 | RNVC: 2

3 Jan 1989

5120-12-312-2455
Seal Inserter

123122455
1108 893 2405: RNCC: 3 | RNVC: 2

8 Dec 1987

5120-12-316-1448
Rohr Heber

123161448
1X56115484: RNCC: 3 | RNVC: 2
0535785: RNCC: 5 | RNVC: 2

24 Dec 1988

5120-12-372-5210
Pliers

123725210
8024: RNCC: 3 | RNVC: 2

25 Jul 2007

5120-12-140-3021

5120-12-378-2943
Socket Head Screw Key Set

123782943
211-190-01: RNCC: 3 | RNVC: 2
00.41.44.70: RNCC: 5 | RNVC: 2

26 Mar 2009

5120-12-158-5268
Durchdrehvorrichtun

121585268
CH2264-25NM: RNCC: 3 | RNVC: 2
8205893259/00: RNCC: 5 | RNVC: 2
820589325900: RNCC: 5 | RNVC: 2
CH2264-25NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-4494
Slip Joint Pliers

121474494
FF0502500C: RNCC: 3 | RNVC: 2
NM279-03: RNCC: 5 | RNVC: 2
NM279-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-0159
Flat Tip Screwdriver

123880159
500 505 10: RNCC: 3 | RNVC: 2
4007157505729: RNCC: 5 | RNVC: 2

15 Feb 2012

5120-12-159-3683
Spanner Wrench

121593683
DIN3116-A35: RNCC: 2 | RNVC: 2
510117-010: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-362-4580
Flat Tip Screwdriver

123624580
54.0084.960.11: RNCC: 3 | RNVC: 2
8000-3-80: RNCC: 5 | RNVC: 2

26 Feb 2004

5120-12-392-4714
Combination Box And Open End Wrench

123924714
40084646-TCS: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-12-369-6138
Schluessel

123696138
5601-00-1815: RNCC: 3 | RNVC: 2

1 Aug 2006

5120-12-170-8142
Flat Tip Screwdriver

121708142
8060VDE-0,6X4,5X150: RNCC: 3 | RNVC: 2
213-5X150: RNCC: 3 | RNVC: 2
169137: RNCC: 5 | RNVC: 2
5M.8936.220.73: RNCC: 5 | RNVC: 2
213035: RNCC: 5 | RNVC: 2
131720: RNCC: 5 | RNVC: 9
8060-0-6X4-5X150: RNCC: 5 | RNVC: 9
8060VDE/4,5: RNCC: 5 | RNVC: 9

11 Aug 1977

5120-12-303-4729
Rohrbieger Rolle

123034729
BAV 6/12 BIEGEROLLE ROHRD 12MM: RNCC: 3 | RNVC: 2

26 Mar 1985

5120-12-301-4096
Drive Pin Punch

123014096
NO PRIMARY REF 12-301-4096: RNCC: 3 | RNVC: 2
107563: RNCC: 5 | RNVC: 9
159778: RNCC: 5 | RNVC: 9
3659SP-2,8: RNCC: 5 | RNVC: 9
3659SP-2,9: RNCC: 5 | RNVC: 9

11 Oct 1984

5120-12-306-9552
Lamp Extractor

123069552
ZG4149G001: RNCC: 3 | RNVC: 2
ZG4149G001: RNCC: 5 | RNVC: 9

21 Apr 1986

5120-12-325-9331
Montierwerk Huelse

123259331
4990009: RNCC: 3 | RNVC: 2

23 Jul 1991

5120-12-363-9282
Bearing And Bushing Inserter

123639282
T670P5001289: RNCC: 3 | RNVC: 2

5 Aug 2004

5120-12-330-9884
Auswechselwerkzeug

123309884
2084: RNCC: 3 | RNVC: 2

8 Mar 1993

5120-12-357-7154
Socket Wrench Crowfoot Attachment

123577154
J0433557D311-000A1-003: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-181-7091
Spanner Wrench

121817091
264-599: RNCC: 3 | RNVC: 2

12 Dec 1979

5120-12-357-0264
Socket Wrench Socket

123570264
5206711: RNCC: 3 | RNVC: 2

25 Apr 2002

5120-12-181-1431
Mechanical Puller

121811431
001589413300: RNCC: 3 | RNVC: 9

29 Oct 1979

5120-12-126-3333
Blacksmith's Top Fuller

121263333
5054020015: RNCC: 3 | RNVC: 2
0002301-15: RNCC: 3 | RNVC: 2
5054.02-15: RNCC: 5 | RNVC: 2
A15DIN7443: RNCC: 5 | RNVC: 2
23-15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-5226
Ausdrueckwerkzeug

121535226
CH1773/110NM: RNCC: 3 | RNVC: 2
5615890116/00: RNCC: 5 | RNVC: 2
CH1773-110NM: RNCC: 5 | RNVC: 2
CH1773-110NM: RNCC: 5 | RNVC: 9
561589011600: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-183-7908
Drive Pin Punch

121837908
574D008-10: RNCC: 3 | RNVC: 9

20 May 1980

5120-12-309-7025
Spanner Wrench

123097025
335927-9006.000: RNCC: 3 | RNVC: 2
335927-9006-000: RNCC: 5 | RNVC: 9
335927-9006.000: RNCC: 5 | RNVC: 9
33 59 27-9006.000: RNCC: 5 | RNVC: 9

18 Feb 1987

5120-12-328-2916
Eindrueckwerkzeug

123282916
4900255-132000-01-00: RNCC: 2 | RNVC: 2
ZG5043T064: RNCC: 3 | RNVC: 2
ZG5043T064: RNCC: 5 | RNVC: 9

5 May 1992

5120-12-340-8131
Hand Terminal Crimping Tool

123408131
WZ10: RNCC: 3 | RNVC: 2

18 Jun 1996

5120-12-130-8591
Socket Wrench Socket

121308591
NO PRIMARY REF 12-130-8591: RNCC: 3 | RNVC: 2
7810SZ13-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-377-2809
Plug Electrical Connector Extractor

123772809
63887100: RNCC: 3 | RNVC: 2
638871000874: RNCC: 5 | RNVC: 2

29 Dec 2008

5120-12-373-1345
Pliers

123731345
3011140: RNCC: 3 | RNVC: 2
00.14.22.64: RNCC: 5 | RNVC: 2

1 Oct 2007

5120-12-314-2322
Boerdelwer Einsatz

123142322
4597-51-9: RNCC: 3 | RNVC: 2
1651/9: RNCC: 3 | RNVC: 2

17 Jun 1988

5120-12-306-8641
Bearing And Bushing Inserter

123068641
8470360: RNCC: 3 | RNVC: 2
4-8208-713: RNCC: 5 | RNVC: 2
8208713: RNCC: 5 | RNVC: 2

11 Apr 1986

5120-12-361-5152
Flat Tip And Cross Tip Screwdriver Set

123615152
05018287001: RNCC: 3 | RNVC: 2
932/918/6: RNCC: 5 | RNVC: 2
018287: RNCC: 5 | RNVC: 9

10 Oct 2003

5120-12-304-0954
Elektron Auszieher

123040954
AZ4018G081: RNCC: 2 | RNVC: 2
AZ4018G081: RNCC: 3 | RNVC: 2
AZ4018G081: RNCC: 5 | RNVC: 9

11 Jun 1985

5120-12-170-2624

5120-12-126-1403

5120-12-158-5932
Screw Thread Insert Inserter

121585932
01500169700: RNCC: 3 | RNVC: 2
01562697000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-152-7783
Socket Wrench

121527783
25V10: RNCC: 3 | RNVC: 2
212032: RNCC: 5 | RNVC: 9
25V10: RNCC: 5 | RNVC: 9
25V10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-070-0145

5120-12-351-4239
Screwdriver Bit

123514239
0986611401: RNCC: 3 | RNVC: 2

25 Jul 2000

5120-12-023-1473

5120-12-120-4580

5120-12-318-2889
Retaining Ring Installation Tool

123182889
116589181500: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-12-327-6828
Verspannvorrichtung

123276828
57.8061.010.00: RNCC: 3 | RNVC: 2
5120-01530: RNCC: 6 | RNVC: 9

18 Feb 1992

5120-12-387-6545
Bearing And Bushing Inserter

123876545
T671P5002132: RNCC: 3 | RNVC: 2

20 Jan 2012

5120-12-131-7159
Dorn

121317159
3045890039: RNCC: 3 | RNVC: 2
3045890039: RNCC: 3 | RNVC: 9
304589003900: RNCC: 5 | RNVC: 2
304589003900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-025-4529

5120-12-325-2247
Pliers

123252247
0852 5038: RNCC: 3 | RNVC: 2
8525038: RNCC: 5 | RNVC: 2

17 May 1991

5120-12-183-5277
Spezial- Schluessel

121835277
050482: RNCC: 3 | RNVC: 2

24 Apr 1980

5120-12-176-6850
Einpreszwerkzeug

121766850
435589024300: RNCC: 3 | RNVC: 2

13 Dec 1978

5120-12-333-5482
Op Montierwerkzeug

123335482
61-90-006: RNCC: 3 | RNVC: 2

5 Jan 1994

5120-12-387-1348
Seal Inserter

123871348
80996040127: RNCC: 3 | RNVC: 2
80.99604-0127: RNCC: 5 | RNVC: 2

9 Nov 2011

5120-12-141-7593

5120-12-151-6556
Hand Rivet Set

121516556
100199-1101W2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-388-9767
Aligning Punch

123889767
80996170219: RNCC: 3 | RNVC: 2
80.99617-0219: RNCC: 5 | RNVC: 2

11 May 2012

5120-12-194-4797
Spanner Wrench

121944797
KDAL5483: RNCC: 3 | RNVC: 2
EFAL1271687950520: RNCC: 5 | RNVC: 2

8 Nov 1982

5120-12-306-0074
Drain Plug Wrench

123060074
NO PRIMARY REF 12-306-0074: RNCC: 3 | RNVC: 2
3701-12: RNCC: 5 | RNVC: 9
3904: RNCC: 5 | RNVC: 9
5719640003: RNCC: 5 | RNVC: 9

20 Jan 1986

5120-12-150-1547
Suchstift

121501547
100033-300-17: RNCC: 2 | RNVC: 2
100033-300-17: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-312-3271
Werkst Druckstueck

123123271
30-205: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-12-178-3104
Abziehglocke

121783104
0043387: RNCC: 3 | RNVC: 2

12 Apr 1979

5120-12-357-2288
Duese Reiniger

123572288
0986611143: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-320-8319
Torque Wrench

123208319
NO PRIMARY REF 12-320-8319: RNCC: 3 | RNVC: 2
51040006: RNCC: 5 | RNVC: 9
760/6: RNCC: 5 | RNVC: 9
760NM/6: RNCC: 5 | RNVC: 9

21 Feb 1990

5120-12-137-3273
Montage Bolzen

121373273
CH1312-1-57: RNCC: 3 | RNVC: 2
1205 0721: RNCC: 3 | RNVC: 2
12050721: RNCC: 5 | RNVC: 2
3.418.0.018.019.4: RNCC: 5 | RNVC: 2
CH1312-1-57: RNCC: 5 | RNVC: 9
3-418-0-018-019-4: RNCC: 5 | RNVC: 9
30-9010-36-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-4735
Socket Wrench Crowfoot Attachment

123644735
02210022-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-363-1499
Nietzugst Fuehrung

123631499
7202407: RNCC: 3 | RNVC: 2

6 May 2004

5120-12-382-7377
Electronic Equipment Alignment Tool

123827377
50960710: RNCC: 3 | RNVC: 2

3 Aug 2010

5120-12-141-6647
Hand Tube Bender

121416647
636D502B5-8IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5000
Open End Wrench

121235000
S130-7X9: RNCC: 3 | RNVC: 2
200-7X9: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-318-2835
Vise Jaw Caps

123182835
10834: RNCC: 3 | RNVC: 2
10834-120 MM: RNCC: 5 | RNVC: 9
10834: RNCC: 5 | RNVC: 9

26 Jun 1989

5120-12-192-3292
Open End Wrench

121923292
92037-75X10: RNCC: 3 | RNVC: 2
92037 75X10: RNCC: 5 | RNVC: 2

14 Apr 1982

5120-12-329-0391
Torque Wrench Multiplier

123290391
NO PRIMARY REF 12-329-0391: RNCC: 3 | RNVC: 2
8601-11: RNCC: 5 | RNVC: 9

11 Jul 1992

5120-12-383-2222
Flat Tip And Cross Tip Screwdriver Set

123832222
00041529: RNCC: 3 | RNVC: 2

27 Sep 2010

5120-12-312-3185
Hand Hammer

123123185
237740 KG 40: RNCC: 3 | RNVC: 2
800-40: RNCC: 3 | RNVC: 2
3625RH-40: RNCC: 5 | RNVC: 9
176621: RNCC: 5 | RNVC: 9

15 Dec 1987

5120-12-331-8923
Swivel Knob Jeweler's Screwdriver

123318923
TL5120-0111-19: RNCC: 2 | RNVC: 2
010210: RNCC: 3 | RNVC: 9
2127-00: RNCC: 5 | RNVC: 9

1 Jul 1993

5120-12-167-9756
Open End Wrench

121679756
NO PRIMARY REF 12-167-9756: RNCC: 3 | RNVC: 2
229334: RNCC: 5 | RNVC: 9
8M4: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-171-5364
Spanner Wrench

121715364
335929-9009.000: RNCC: 3 | RNVC: 2
1238W19: RNCC: 5 | RNVC: 2
1238W19: RNCC: 5 | RNVC: 2
335929-9009.000: RNCC: 5 | RNVC: 9

21 Oct 1977

5120-12-156-3213

5120-12-384-9808
Spanner Wr Adapter

123849808
6625450053: RNCC: 3 | RNVC: 2

15 Apr 2011

5120-12-340-4525
Socket Wrench

123404525
P20565: RNCC: 3 | RNVC: 2

17 Apr 1996

5120-12-134-2620
Socket Wrench

121342620
080M00300: RNCC: 3 | RNVC: 2
VM60406: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-369-3403
Crimping Tool Die

123693403
974990: RNCC: 3 | RNVC: 2

22 Jun 2006

5120-12-140-2911

5120-12-339-6006
Bearing And Bushing Inserter

123396006
80996066027: RNCC: 3 | RNVC: 2

11 Dec 1995

5120-12-041-5733

5120-12-126-1808

5120-12-154-3429
Wrench Kit

121543429
160-88600: RNCC: 3 | RNVC: 2
160-88600: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-094-1314

5120-12-166-2558
Open End Wrench

121662558
12A3-8: RNCC: 3 | RNVC: 2
40462424: RNCC: 5 | RNVC: 2
12A40-46-24-24: RNCC: 6 | RNVC: 9
40-46-24-24: RNCC: 6 | RNVC: 9
1C8417: RNCC: 6 | RNVC: 9

19 Aug 1976

5120-12-194-7238
Montierdorn

121947238
TK-WT41-4910-001-5: RNCC: 2 | RNVC: 2
2064: RNCC: 3 | RNVC: 2
2064: RNCC: 3 | RNVC: 2
VW2064: RNCC: 5 | RNVC: 2
2064: RNCC: 5 | RNVC: 2
10-99-547: RNCC: 5 | RNVC: 2
TK-WT41-4910-001-5: RNCC: 5 | RNVC: 9

30 Nov 1982

5120-12-324-9934
Flat Tip Screwdriver

123249934
07465: RNCC: 3 | RNVC: 9

18 Apr 1991

5120-12-324-9634
Spanner Wrench

123249634
52820-W31: RNCC: 3 | RNVC: 2

16 Apr 1991

5120-12-384-1772
Socket Wrench Socket

123841772
80996030251: RNCC: 3 | RNVC: 2
80.99603-0251: RNCC: 5 | RNVC: 2

31 Jan 2011

5120-12-326-1393
Mechanical Puller Attachment

123261393
460589013300: RNCC: 3 | RNVC: 2
54-506-01: RNCC: 3 | RNVC: 2

12 Aug 1991

5120-12-360-8742
Mechanical Puller Attachment

123608742
0854 1936.004: RNCC: 3 | RNVC: 2

18 Jul 2003

5120-12-371-7575
Oil Filter Wrench

123717575
1015: RNCC: 3 | RNVC: 2
74620002: RNCC: 5 | RNVC: 2

11 May 2007

5120-12-364-5960
Socket Wrench Crowfoot Attachment

123645960
01190014-TCS: RNCC: 3 | RNVC: 2

13 Oct 2004

5120-12-339-6005
Torque Wrench Adapter

123396005
80996030221: RNCC: 3 | RNVC: 2

11 Dec 1995

5120-12-353-8743
Open End Wrench

123538743
000589150100: RNCC: 3 | RNVC: 2

16 May 2001

5120-12-336-5861
Montierhuelse

123365861
0852 3025: RNCC: 3 | RNVC: 2
8523025: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-184-4592
Abziehvorrichtung

121844592
GLZ4611407: RNCC: 3 | RNVC: 2

24 Jul 1980

5120-12-382-1921
Socket Head Screw Key

123821921
0250020C: RNCC: 3 | RNVC: 2

20 May 2010

5120-12-385-3324
Drive Pin Punch

123853324
51.000.082: RNCC: 3 | RNVC: 2
53.000.063: RNCC: 3 | RNVC: 2
51.000.082: RNCC: 5 | RNVC: 2
53.000.063: RNCC: 5 | RNVC: 2

24 May 2011

5120-12-379-0127
Torque Wrench

123790127
51060012-TCS: RNCC: 3 | RNVC: 2

15 Jun 2009

5120-12-328-2962
Ausdrueckwerkzeug

123282962
115589023500: RNCC: 3 | RNVC: 2
115 589 02 35 00: RNCC: 5 | RNVC: 2

5 May 1992

5120-12-365-3302
Driftpin

123653302
5580335: RNCC: 3 | RNVC: 2
(241)A42495580335: RNCC: 8 | RNVC: 2
5580335: RNCC: 8 | RNVC: 2

21 Dec 2004

5120-12-354-1938
Drain Plug Wrench

123541938
189101703: RNCC: 3 | RNVC: 2

19 Jun 2001

5120-12-305-4521
Electrical Contact Remover

123054521
CET-20-4: RNCC: 3 | RNVC: 2

8 Nov 1985

5120-12-306-0871
Adapter

123060871
4983049: RNCC: 3 | RNVC: 2

24 Jan 1986

5120-12-355-4989
Mechanical Puller

123554989
5555289: RNCC: 3 | RNVC: 2

20 Nov 2001

5120-12-312-2165
Werkst Druckstueck

123122165
3062: RNCC: 3 | RNVC: 2

4 Dec 1987

5120-12-393-6587
Sealant Dispenser

123936587
297776: RNCC: 3 | RNVC: 2
91942390: RNCC: 5 | RNVC: 2

30 Sep 2013

5120-12-365-9443
Electronic Equipment Alignment Tool

123659443
T4842 12: RNCC: 3 | RNVC: 2

21 Feb 2005

5120-12-321-1540
Mechanical Puller

123211540
F6375332: RNCC: 3 | RNVC: 2
F620001375332: RNCC: 5 | RNVC: 2

6 Apr 1990

5120-12-189-9806
Socket Head Screw Key

121899806
2500001-381430-00-0: RNCC: 2 | RNVC: 2
2500001-381430-00-0: RNCC: 3 | RNVC: 2

2 Nov 1981

5120-12-130-1395
Drive Pin Punch

121301395
HD 0111: RNCC: 3 | RNVC: 2
355-1.5: RNCC: 3 | RNVC: 2
649295: RNCC: 5 | RNVC: 2
01.55.17.94: RNCC: 5 | RNVC: 2
D1-5DIN6450: RNCC: 5 | RNVC: 9
DIN6450-D1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-321-7469
Flat Tip Screwdriver

123217469
8060VDE-1,6X9X150: RNCC: 3 | RNVC: 2
169226: RNCC: 5 | RNVC: 2

21 Jun 1990

5120-12-336-7709
Screwdriver Bit

123367709
600-1,6X10: RNCC: 3 | RNVC: 2

21 Dec 1994

5120-12-148-7178
Gl Montierwerkzeug

121487178
510262: RNCC: 2 | RNVC: 2
7 628 1303 00: RNCC: 3 | RNVC: 2
510262: RNCC: 3 | RNVC: 2
SUS-9-0302: RNCC: 5 | RNVC: 2
7628130300: RNCC: 5 | RNVC: 2
600310: RNCC: 5 | RNVC: 2
510262: RNCC: 5 | RNVC: 9
7-628-1303-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-390-5671
Bearing Staking Installation Tool

123905671
7125291: RNCC: 3 | RNVC: 2

23 Nov 2012

5120-12-171-3162
Bearing And Bushing Inserter

121713162
105-13141W2: RNCC: 3 | RNVC: 2

29 Sep 1977

5120-12-340-7084
Piston Ring Expander

123407084
1212 8425: RNCC: 3 | RNVC: 2

29 May 1996

5120-12-382-3789
Wrench Kit

123823789
CBD45466G01: RNCC: 3 | RNVC: 2

14 Jun 2010

5120-12-169-3677
Socket Wrench Screwdriver Attachment

121693677
61209300: RNCC: 3 | RNVC: 2
54IC8: RNCC: 3 | RNVC: 2
03070008: RNCC: 5 | RNVC: 2
909125106: RNCC: 5 | RNVC: 2
90 912 5106: RNCC: 5 | RNVC: 9

10 May 1977

5120-12-123-5507
Socket Wrench

121235507
12500A5/8: RNCC: 3 | RNVC: 2
134585: RNCC: 5 | RNVC: 9
1945NBZ5-8: RNCC: 5 | RNVC: 9
33-314: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-372-2283
Hand Tube Swaging Tool Kit

123722283
137283-001: RNCC: 3 | RNVC: 2

28 Jun 2007

5120-12-306-7877
Schraubst Aufnahme

123067877
23176-262131.00.0: RNCC: 2 | RNVC: 2
23176-262131.00.0: RNCC: 3 | RNVC: 2

2 Apr 1986

5120-12-332-1495
Seal Remover

123321495
410 0059 0 3: RNCC: 3 | RNVC: 9
0450 110 00017: RNCC: 5 | RNVC: 9
0450 110 00017: RNCC: 5 | RNVC: 9

22 Jul 1993

5120-12-126-1915
Hand Melting Ladle

121261915
13565: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-156-1557
Socket Wrench Handle

121561557
NM296-04: RNCC: 3 | RNVC: 2
NM296-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-197-3321
Nachformwerkzeugsat

121973321
S51575-0000R1BISR5: RNCC: 3 | RNVC: 2

13 Oct 1983

5120-12-166-1971
Schluessel

121661971
8475445: RNCC: 3 | RNVC: 2
8207-586: RNCC: 5 | RNVC: 2
8207586: RNCC: 5 | RNVC: 2

12 Aug 1976

5120-12-334-6125
Dre Einbauwerkzeug

123346125
4900401-411242.02: RNCC: 2 | RNVC: 2
4900401-411242.02: RNCC: 3 | RNVC: 2

30 May 1994

5120-12-348-1925
Combination Box And Open End Wrench

123481925
5104098-2000: RNCC: 3 | RNVC: 2
5104098-2000: RNCC: 5 | RNVC: 2

4 May 1999

5120-12-356-0230
Pliers

123560230
10450: RNCC: 3 | RNVC: 2

15 Jan 2002

5120-12-368-6773
Seal Remover

123686773
314037: RNCC: 3 | RNVC: 2

6 Apr 2006

5120-12-309-0174
Seal Inserter

123090174
1X56136824: RNCC: 3 | RNVC: 2
8209816: RNCC: 5 | RNVC: 9

8 Dec 1986

5120-12-185-9703
Torque Wrench Adapter

121859703
21-0-13: RNCC: 3 | RNVC: 2

13 Nov 1980

5120-12-023-1489

5120-12-339-4919
Spanner Wrench

123394919
M641142: RNCC: 3 | RNVC: 9

28 Nov 1995

5120-12-157-3530
Socket Wrench Handle

121573530
N13-30-743: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-368-6389
Torque Wrench Adapter

123686389
0306-LIG11-001-02: RNCC: 3 | RNVC: 2

3 Apr 2006

5120-12-323-7865
Schmiede Untersatz

123237865
14200: RNCC: 3 | RNVC: 9

18 Dec 1990

5120-12-342-0535
Seal Inserter

123420535
331860: RNCC: 3 | RNVC: 2
331860: RNCC: 5 | RNVC: 2
0331860: RNCC: 5 | RNVC: 9

4 Dec 1996

5120-12-171-3153
Einpreszwerkzeug

121713153
105-31781W3: RNCC: 3 | RNVC: 2

29 Sep 1977

5120-12-190-6068
Socket Wrench Crowfoot Attachment

121906068
873589010300: RNCC: 3 | RNVC: 2
5120700069: RNCC: 5 | RNVC: 2

7 Dec 1981

5120-12-382-7588
Screwdriver Bit

123827588
05060191001: RNCC: 3 | RNVC: 2
867/4ZTX30X89: RNCC: 5 | RNVC: 2

5 Aug 2010

5120-12-336-7750
Open End Wrench

123367750
702-798110-901-0: RNCC: 2 | RNVC: 2
702-798110-901-0: RNCC: 3 | RNVC: 2

21 Dec 1994

5120-12-330-2055
Socket Wrench Screwdriver Attachment

123302055
8801-8: RNCC: 3 | RNVC: 2

14 Nov 1992

5120-12-157-7570
Mechanical Jack Handle

121577570
127C: RNCC: 3 | RNVC: 2
15879: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-305-2226
Socket Wrench Crowfoot Attachment

123052226
4984034: RNCC: 3 | RNVC: 2

9 Oct 1985

5120-12-368-9769
Rohr- Zange

123689769
111 015 2: RNCC: 3 | RNVC: 2
00.13.22.61: RNCC: 5 | RNVC: 2

10 May 2006

5120-12-344-1941
Wrench Extension Handle

123441941
2300232-971200.001.0: RNCC: 2 | RNVC: 2
2300232-971200.001.0: RNCC: 3 | RNVC: 2

24 Sep 1997

5120-12-126-1227
Blacksmith's Punch

121261227
DIN5253-B15S: RNCC: 2 | RNVC: 2
26-15: RNCC: 3 | RNVC: 2
5057-02-15: RNCC: 5 | RNVC: 2
B15SDIN5253: RNCC: 5 | RNVC: 2
5057ES15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-1533
Socket Wrench

121561533
NM392-07: RNCC: 3 | RNVC: 2
NM392-07: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-311-0945
Spanner Wrench

123110945
395589050700: RNCC: 3 | RNVC: 2

24 Jul 1987

5120-12-365-2215
Hand Terminal Crimping Tool

123652215
8101: RNCC: 3 | RNVC: 2
6723940: RNCC: 5 | RNVC: 2

8 Dec 2004

5120-12-364-3140
Socket Wrench Socket

123643140
01240007-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-140-2562
Drive Pin Punch

121402562
D041301T1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-365-1137
Bearing And Bushing Inserter

123651137
H14831002: RNCC: 3 | RNVC: 2

30 Nov 2004

5120-12-333-8142
Box Wrench

123338142
63113301: RNCC: 3 | RNVC: 2
63113300: RNCC: 5 | RNVC: 2

9 Feb 1994

5120-12-385-6102
Cran Mounting Tool

123856102
Y4342060: RNCC: 3 | RNVC: 2

21 Jun 2011

5120-12-361-3155
Montierhuelse

123613155
80996060458: RNCC: 3 | RNVC: 2

16 Sep 2003

5120-12-129-1384

5120-12-123-5700
Socket Wrench Socket

121235700
NO PRIMARY REF 12-123-5700: RNCC: 3 | RNVC: 2
05420056: RNCC: 5 | RNVC: 9
56A1 1-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-142-0466
Socket Wrench

121420466
0580-21VZK: RNCC: 3 | RNVC: 2
R5-5-6X: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-393-2084
Torque Wrench

123932084
3100001000: RNCC: 3 | RNVC: 2
DSG-00/1: RNCC: 5 | RNVC: 2

19 Aug 2013

5120-12-367-9272
Socket Head Screw Key

123679272
537239-8575.000: RNCC: 3 | RNVC: 2

7 Nov 2005

5120-12-335-3504
Seal Inserter

123353504
3434103600: RNCC: 3 | RNVC: 2
SAF 3434103600: RNCC: 5 | RNVC: 2

11 Aug 1994

5120-12-140-4575
Socket Wrench

121404575
C20407-Z7-A35: RNCC: 3 | RNVC: 2
C20407Z7A35: RNCC: 5 | RNVC: 2
TFS70-05386: RNCC: 5 | RNVC: 2
26R5X5-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-8296
Socket Wrench

123308296
03.364.26.01.0: RNCC: 3 | RNVC: 2
0336426010: RNCC: 5 | RNVC: 2

15 Feb 1993

5120-12-306-5618
W Spannvorrichtung

123065618
TK-BA35-5120-466: RNCC: 2 | RNVC: 2
237-112.0006.3: RNCC: 3 | RNVC: 2
237-1120006.3: RNCC: 5 | RNVC: 9

11 Mar 1986

5120-12-336-5501

5120-12-368-8028
Socket Wrench Socket

123688028
55-21: RNCC: 3 | RNVC: 2
771-S21: RNCC: 3 | RNVC: 2
32-21: RNCC: 3 | RNVC: 2
1000-21: RNCC: 3 | RNVC: 2
05010021: RNCC: 5 | RNVC: 2
00.51.66.25: RNCC: 5 | RNVC: 2
6269960: RNCC: 5 | RNVC: 2
4000896001491: RNCC: 5 | RNVC: 2

21 Apr 2006

5120-12-365-9146
Socket Head Screw Key

123659146
T4834 2: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-381-7715
M Indentation Tool

123817715
PWZC606000200XXXXX: RNCC: 3 | RNVC: 2

29 Mar 2010

5120-12-367-7126
Socket Wrench Set

123677126
854-1: RNCC: 3 | RNVC: 2
4000896038343: RNCC: 5 | RNVC: 2

28 Sep 2005

5120-12-137-9338
Screwdriver Bit Set And Handle

121379338
R6322: RNCC: 3 | RNVC: 2
R6322: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-345-4287
Mechanical Puller Attachment

123454287
912-010-20: RNCC: 3 | RNVC: 2
80.99628-0062: RNCC: 5 | RNVC: 2
80996280062: RNCC: 5 | RNVC: 2

12 Mar 1998

5120-12-376-4188
Socket Wrench Socket

123764188
6193960: RNCC: 3 | RNVC: 2
850-E10: RNCC: 3 | RNVC: 2
40TX-E10: RNCC: 3 | RNVC: 2
4010886619391: RNCC: 5 | RNVC: 2
TX 20 E10: RNCC: 5 | RNVC: 2
4000896036615: RNCC: 5 | RNVC: 2
01270010: RNCC: 5 | RNVC: 2
4010886619391: RNCC: 5 | RNVC: 2
6193960: RNCC: 5 | RNVC: 2
TX 20 E10: RNCC: 5 | RNVC: 2

26 Sep 2008

5120-12-346-9208
Socket Wrench

123469208
05005335001: RNCC: 3 | RNVC: 2
9803-12: RNCC: 3 | RNVC: 2
190I-12VDE: RNCC: 5 | RNVC: 2
005335: RNCC: 5 | RNVC: 9

28 Sep 1998

5120-12-352-1906
Socket Head Screw Key

123521906
TL5120-0132-I2: RNCC: 2 | RNVC: 2
10766-T7: RNCC: 3 | RNVC: 2
43220007: RNCC: 5 | RNVC: 2

24 Oct 2000

5120-12-353-4447
Socket Wrench

123534447
28M-15: RNCC: 3 | RNVC: 2
1834722: RNCC: 5 | RNVC: 2

23 Mar 2001

5120-12-163-6611
Ausziehvorrichtung

121636611
26-21C1099G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-384-9522
Flat Tip Screwdriver

123849522
40-5X175: RNCC: 3 | RNVC: 2

13 Apr 2011

5120-12-023-1430

5120-12-137-8265

5120-12-369-2094
Drill Drift

123692094
317258: RNCC: 3 | RNVC: 2
01.08.71.07: RNCC: 5 | RNVC: 2

2 Jun 2006

5120-12-196-1651
Mechanical Puller

121961651
35-940F009: RNCC: 3 | RNVC: 2

7 Jun 1983

5120-12-151-8428

5120-12-070-0199

5120-12-315-4360
Seal Inserter

123154360
4987045: RNCC: 3 | RNVC: 2

21 Oct 1988

5120-12-194-5482
Torque Wrench Multiplier

121945482
F30030459: RNCC: 3 | RNVC: 2
IP1500KRS: RNCC: 5 | RNVC: 2
F362450030459: RNCC: 5 | RNVC: 2

15 Nov 1982

5120-12-126-2995
Plastic Mallet

121262995
C3625G: RNCC: 3 | RNVC: 2
107369: RNCC: 5 | RNVC: 2
107363: RNCC: 5 | RNVC: 9
C3625G35: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-1994
Dorn

121471994
92010244: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-161-4297
Electronic Equipment Alignment Tool

121614297
1712180105: RNCC: 3 | RNVC: 2
17121 80105: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-2123

5120-12-304-0347
Montierwerk Huelse

123040347
117-31713W1: RNCC: 3 | RNVC: 2

31 May 1985

5120-12-120-5239

5120-12-121-6883

5120-12-157-0272
Socket Head Screw Key

121570272
NO PRIMARY REF 12-157-0272: RNCC: 3 | RNVC: 2
130271: RNCC: 5 | RNVC: 9
1997ZB7-64: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-5975
Socket Wrench Handle Bar

121905975
MKV1150/4501.01.02.16: RNCC: 3 | RNVC: 2

7 Dec 1981

5120-12-355-3187
Spanner Wrench

123553187
764C-40-80/6: RNCC: 3 | RNVC: 2
5304358: RNCC: 5 | RNVC: 2

31 Oct 2001

5120-12-700-4742
Stone Hook

127004742
52-01390010827: RNCC: 2 | RNVC: 2
188.001.000.000: RNCC: 5 | RNVC: 9

10 Sep 1992

5120-12-336-2516
Weapons Handling Bar

123362516
1000089-90210: RNCC: 2 | RNVC: 2
1000089-90210: RNCC: 3 | RNVC: 2

4 Nov 1994

5120-12-126-2161
Vise Jaw Caps

121262161
TL5120-0138-003: RNCC: 2 | RNVC: 2
57120135: RNCC: 3 | RNVC: 2
110135: RNCC: 3 | RNVC: 2
66192005: RNCC: 3 | RNVC: 9
51069: RNCC: 5 | RNVC: 9
51069030: RNCC: 5 | RNVC: 9
4306-125: RNCC: 5 | RNVC: 9
110135: RNCC: 5 | RNVC: 9
HASALU-135: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-390-1994
Mechanical Puller Attachment

123901994
F6452192: RNCC: 3 | RNVC: 2

16 Oct 2012

5120-12-184-4259
Craftsman's Tweezers

121844259
1900TRF: RNCC: 3 | RNVC: 2

24 Jul 1980

5120-12-389-0957
Marlinespike

123890957
07145827: RNCC: 3 | RNVC: 2

25 May 2012

5120-12-348-3846
Torque Wrench

123483846
000589642100: RNCC: 3 | RNVC: 2
000 589 64 21 00: RNCC: 5 | RNVC: 2

14 Jun 1999

5120-12-028-5756

5120-12-153-7140
Open End Wrench

121537140
NM283-15: RNCC: 3 | RNVC: 2
NM283-15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5902

5120-12-147-9243
Schluessel

121479243
890-0826-04-01: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-137-0565
Blacksmiths' Tongs

121370565
NO PRIMARY REF 12-137-0565: RNCC: 3 | RNVC: 2
2839-700: RNCC: 5 | RNVC: 9
623B106-700: RNCC: 5 | RNVC: 9
280-700: RNCC: 5 | RNVC: 9
DIN5171-F20: RNCC: 5 | RNVC: 9
F20DIN5171: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-316-8239
Rohrbieger Dorn

123168239
5-100-065-000-31429: RNCC: 3 | RNVC: 2

16 Feb 1989

5120-12-183-6922
Face Spanner Wrench Socket

121836922
1000042-192600.04: RNCC: 3 | RNVC: 2
1000042-192600-04: RNCC: 5 | RNVC: 2

13 May 1980

5120-12-353-4706
Retaining Ring Pliers

123534706
346475: RNCC: 3 | RNVC: 2
93083-150W1: RNCC: 5 | RNVC: 2

28 Mar 2001

5120-12-349-7297
Pliers

123497297
65095140: RNCC: 3 | RNVC: 2

4 Jan 2000

5120-12-308-2255
Seal Inserter

123082255
4986006: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-12-310-3193
Mechanical Puller Attachment

123103193
2996.66.82: RNCC: 3 | RNVC: 2

11 May 1987

5120-12-172-1840
Spanner Wrench

121721840
903-812-0076: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-177-1099
Retaining Ring Pliers

121771099
NO PRIMARY REF 12-177-1099: RNCC: 3 | RNVC: 2
C125DIN5256: RNCC: 5 | RNVC: 9
DIN5256-C125: RNCC: 5 | RNVC: 9

15 Jan 1979

5120-12-171-9317
Torque Wrench

121719317
NO PRIMARY REF 12-171-9317: RNCC: 3 | RNVC: 2
65801-50: RNCC: 5 | RNVC: 9
76NM/50: RNCC: 5 | RNVC: 9
51010050: RNCC: 5 | RNVC: 9
76-50: RNCC: 5 | RNVC: 9
760NM/50 UND 3115: RNCC: 5 | RNVC: 9
760NM/50-3115: RNCC: 5 | RNVC: 9
760NM/50-3116/1: RNCC: 5 | RNVC: 9
76-50: RNCC: 5 | RNVC: 9

29 Nov 1977

5120-12-377-9222
Spanner Wrench

123779222
5120-0042-000000: RNCC: 3 | RNVC: 2
5120-0042-000000: RNCC: 5 | RNVC: 2
5120-0042-000000: RNCC: 5 | RNVC: 9

25 Feb 2009

5120-12-313-4426
Manual Impact Wrench

123134426
3401: RNCC: 3 | RNVC: 2

31 Mar 1988

5120-12-305-7033
Drahtwickl Einsatz

123057033
WB26M: RNCC: 3 | RNVC: 9
WB26M: RNCC: 5 | RNVC: 9
WB26M: RNCC: 5 | RNVC: 9
08L592: RNCC: 5 | RNVC: 9

5 Dec 1985

5120-12-159-8352
Schluesseleinsatz

121598352
R5VIERKANT27: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-027-4009

5120-12-126-1358
Trowel

121261358
NO PRIMARY REF 12-126-1358: RNCC: 3 | RNVC: 2
6DIN6441: RNCC: 5 | RNVC: 9
DIN6441-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-188-4232
Spanner Wrench

121884232
0705E100555/1: RNCC: 3 | RNVC: 2
0705E100555-1-B: RNCC: 5 | RNVC: 9
0705E100555-1-C: RNCC: 5 | RNVC: 9
0705E100555-1-D: RNCC: 5 | RNVC: 9

8 Jul 1981

5120-12-142-0273
Befestigungsstift

121420273
560: RNCC: 3 | RNVC: 2
TS5120-0657-560: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-332-9765
Auswechs Klemmteil

123329765
410 0062 0 3: RNCC: 3 | RNVC: 9
0450 110 00020: RNCC: 5 | RNVC: 9
TK-BA35-5180-467-10: RNCC: 5 | RNVC: 9

18 Oct 1993

Load More Results