What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 37 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 37 of 62

5120-12-130-1315
Mechanical Finger

121301315
NO PRIMARY REF 12-130-1315: RNCC: 3 | RNVC: 2
2516-700: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-6654
Socket Wrench Socket

121206654
NO PRIMARY REF 12-120-6654: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-129-3437
Hand Manhole Cover Hook

121293437
TK-BA35-5120-214: RNCC: 2 | RNVC: 2
42102-6000.02: RNCC: 2 | RNVC: 2
44952: RNCC: 3 | RNVC: 2
42102-6000.02: RNCC: 5 | RNVC: 2
63412442: RNCC: 5 | RNVC: 2
E0109-16-00: RNCC: 5 | RNVC: 9
42102-6000-02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-168-5283
Gelenkstueck

121685283
0276082000: RNCC: 3 | RNVC: 2

18 Mar 1977

5120-12-376-6431
Swivel Knob Jeweler's Screwdriver

123766431
T4880XES15: RNCC: 3 | RNVC: 2

23 Oct 2008

5120-12-307-6363
Montage- Hebel

123076363
4L16617: RNCC: 3 | RNVC: 2
820011: RNCC: 3 | RNVC: 2

10 Jul 1986

5120-12-373-0311
Screwdriver Bit Set And Handle

123730311
23107: RNCC: 3 | RNVC: 2

19 Sep 2007

5120-12-309-8602
Face Spanner Wrench Socket

123098602
02.09.74-6.02/2: RNCC: 3 | RNVC: 2
DM231A1 (76MM UEB DM228A3): RNCC: 5 | RNVC: 9

11 Mar 1987

5120-12-362-2996
Torque Wrench Adapter

123622996
2446-STT 11: RNCC: 3 | RNVC: 2
2446-STT 11: RNCC: 5 | RNVC: 2

4 Feb 2004

5120-12-021-2672

5120-12-325-7859
Torque Wrench Multiplier

123257859
36331: RNCC: 3 | RNVC: 2
KW2400: RNCC: 5 | RNVC: 2

9 Jul 1991

5120-12-175-2500
Socket Wrench Screwdriver Attachment

121752500
49A3-8: RNCC: 3 | RNVC: 2
02450024: RNCC: 5 | RNVC: 2
A7409-3/8: RNCC: 5 | RNVC: 9
A7409Z-3/8: RNCC: 5 | RNVC: 9
176281: RNCC: 5 | RNVC: 9

4 Sep 1978

5120-12-321-7619
Mechanical Puller Attachment

123217619
3-200-P: RNCC: 3 | RNVC: 2

22 Jun 1990

5120-12-150-6108
Seite Waermebolzen

121506108
1X46095098: RNCC: 3 | RNVC: 2
V95098: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-3055
Hand Hammer

121263055
1522-3-4: RNCC: 3 | RNVC: 2
5081030750: RNCC: 3 | RNVC: 2
07100003: RNCC: 3 | RNVC: 2
15220750: RNCC: 5 | RNVC: 2
00.72.64.86: RNCC: 5 | RNVC: 2
7100003: RNCC: 5 | RNVC: 2
5081-03 3-4LBS: RNCC: 5 | RNVC: 2
5081ES340: RNCC: 5 | RNVC: 2
107300: RNCC: 5 | RNVC: 9
3500NB340: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-8790
Craftsman's Tweezers

121558790
4240309: RNCC: 3 | RNVC: 2
3-SA-E: RNCC: 5 | RNVC: 2
4240312: RNCC: 5 | RNVC: 9
2135-13: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-310-0445
Handbetaetig Klaue

123100445
870/102-900: RNCC: 3 | RNVC: 2

31 Mar 1987

5120-12-197-8030
Mechanical Puller

121978030
206-3: RNCC: 3 | RNVC: 2

23 Nov 1983

5120-12-316-9522
Socket Wrench

123169522
8-7303.00: RNCC: 2 | RNVC: 2
9861513: RNCC: 3 | RNVC: 2
8-7303.00: RNCC: 5 | RNVC: 2
8-7303.00: RNCC: 5 | RNVC: 9
9861513: RNCC: 5 | RNVC: 9

28 Feb 1989

5120-12-319-9801
Plier Clamp

123199801
758-3: RNCC: 3 | RNVC: 2
5370980014: RNCC: 5 | RNVC: 2

24 Nov 1989

5120-12-171-6846
Mechanical Puller Attachment

121716846
220-5: RNCC: 3 | RNVC: 2
4520E: RNCC: 5 | RNVC: 9
108141: RNCC: 5 | RNVC: 9

3 Nov 1977

5120-12-178-6472
Spindel

121786472
01TC31846: RNCC: 3 | RNVC: 2

7 May 1979

5120-12-343-0772
Mechanical Puller

123430772
118/1: RNCC: 3 | RNVC: 2

25 Apr 1997

5120-12-350-7826
Drive Pin Punch

123507826
3658A-2: RNCC: 3 | RNVC: 2
1075293: RNCC: 5 | RNVC: 2

19 May 2000

5120-12-180-6070
Hand Tube Bender Set

121806070
4-5-6-8-10-2829R: RNCC: 3 | RNVC: 2
5120-90166: RNCC: 6 | RNVC: 9

21 Sep 1979

5120-12-301-5055
Hand Terminal Crimping Tool

123015055
9700215A: RNCC: 3 | RNVC: 2
825508-5: RNCC: 3 | RNVC: 2
00.16.64.15: RNCC: 5 | RNVC: 2

19 Oct 1984

5120-12-311-0629
Bearing And Bushing Inserter

123110629
395589031500: RNCC: 3 | RNVC: 2

22 Jul 1987

5120-12-379-2269
Nietzugst Fuehrung

123792269
7222602: RNCC: 3 | RNVC: 2
GBM30-360: RNCC: 5 | RNVC: 2

6 Jul 2009

5120-12-126-2534
Blacksmith's Vise

121262534
3080-13: RNCC: 3 | RNVC: 2
3080-13: RNCC: 5 | RNVC: 2
13007: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-179-8636
Socket Wrench

121798636
081105: RNCC: 3 | RNVC: 9
6-102: RNCC: 3 | RNVC: 9

3 Aug 1979

5120-12-366-9510
K Einstellwerkzeug

123669510
Y4279079: RNCC: 3 | RNVC: 2

23 Jun 2005

5120-12-351-2770
Auswechselwe Griff

123512770
3099-00-190000.02: RNCC: 3 | RNVC: 2
3099-190000.02: RNCC: 5 | RNVC: 2

10 Jul 2000

5120-12-390-3187
Socket Wrench Socket

123903187
46ASP-14: RNCC: 3 | RNVC: 2
4018754109180: RNCC: 5 | RNVC: 2
02021014: RNCC: 5 | RNVC: 2

29 Oct 2012

5120-12-389-4278
Torque Screwdriver

123894278
659949-30: RNCC: 3 | RNVC: 2

4 Jul 2012

5120-12-166-1676
Spannbackensatz

121661676
2360-264180.02.0: RNCC: 2 | RNVC: 2
2360-264180.02.0: RNCC: 3 | RNVC: 2
2360-264180-02-0: RNCC: 5 | RNVC: 2
2360-264180.02.0: RNCC: 5 | RNVC: 2
2360-264180-02-0: RNCC: 5 | RNVC: 9
2360-264180.02.0: RNCC: 5 | RNVC: 9

10 Aug 1976

5120-12-313-2335
Auswechselwe Griff

123132335
P-896436-405: RNCC: 3 | RNVC: 2
P896436-405: RNCC: 5 | RNVC: 2

12 Mar 1988

5120-12-164-8835
Flat Tip Screwdriver

121648835
DIN5265-C-B0,8X4: RNCC: 2 | RNVC: 9
4804.04: RNCC: 3 | RNVC: 2
205-3-5-100: RNCC: 3 | RNVC: 2
1004-100X4X4: RNCC: 3 | RNVC: 2
DIN5266-0,8X3,5: RNCC: 5 | RNVC: 9
205-3: RNCC: 5 | RNVC: 9
0-8X3-5DIN5266: RNCC: 5 | RNVC: 9
DIN5265-A-B0,8X4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-385-6868
Bearing And Bushing Inserter And Remover

123856868
050.129: RNCC: 3 | RNVC: 2
11490210474: RNCC: 5 | RNVC: 2

30 Jun 2011

5120-12-342-0112
Seal Inserter And Remover

123420112
111890: RNCC: 3 | RNVC: 2
111890: RNCC: 5 | RNVC: 2
0111890: RNCC: 5 | RNVC: 9

29 Nov 1996

5120-12-328-6466
Bearing And Bushing Inserter

123286466
F30278208: RNCC: 3 | RNVC: 2
F361160278208: RNCC: 5 | RNVC: 2

11 Jun 1992

5120-12-183-0823
Face Spanner Wrench Socket

121830823
0706C100737-1: RNCC: 3 | RNVC: 2

18 Mar 1980

5120-12-368-9246
Screwdriver Bit Set

123689246
1-750: RNCC: 3 | RNVC: 2

8 May 2006

5120-12-384-8082
Hammer Handle

123848082
51.000.030: RNCC: 3 | RNVC: 2
51.000.030: RNCC: 5 | RNVC: 2

31 Mar 2011

5120-12-338-1614
Cable Tie Installation Tool

123381614
MHBWHA001WHV001000: RNCC: 3 | RNVC: 2
RAB3926: RNCC: 5 | RNVC: 2

30 May 1995

5120-12-328-6971
Dreh Haltewerkzeug

123286971
F6375359: RNCC: 3 | RNVC: 2

16 Jun 1992

5120-12-340-7470
Screwdriver Bit

123407470
13010-8: RNCC: 3 | RNVC: 2
08260008: RNCC: 5 | RNVC: 2

4 Jun 1996

5120-12-342-8415
Spanner Wrench

123428415
18 910 1704: RNCC: 3 | RNVC: 2

9 Apr 1997

5120-12-141-0395

5120-12-365-9449
Hand Hammer

123659449
T4203: RNCC: 3 | RNVC: 2

21 Feb 2005

5120-12-357-7258
Seal Inserter

123577258
9200544000: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-182-2098
Socket Wrench Crowfoot Attachment

121822098
540-22: RNCC: 3 | RNVC: 2

21 Jan 1980

5120-12-329-3328
Stud Remover

123293328
272.498 870: RNCC: 3 | RNVC: 2
272-498-870GZ3: RNCC: 5 | RNVC: 2
272-498-870GZ3: RNCC: 5 | RNVC: 2

6 Aug 1992

5120-12-369-8650
Torque Wrench

123698650
775A/50: RNCC: 3 | RNVC: 2
51460050: RNCC: 5 | RNVC: 2

22 Aug 2006

5120-12-351-3166
Montierwerk Huelse

123513166
9253834000: RNCC: 3 | RNVC: 2

12 Jul 2000

5120-12-335-4448
Mechanical Puller

123354448
0852 3062: RNCC: 3 | RNVC: 2
8523062: RNCC: 5 | RNVC: 2

18 Aug 1994

5120-12-335-9624
Face Spanner Wrench Socket

123359624
0851 3694: RNCC: 3 | RNVC: 2
8513694: RNCC: 5 | RNVC: 2

6 Oct 1994

5120-12-370-9157
Cross Tip Screwdriver

123709157
11307: RNCC: 3 | RNVC: 2
113PH3: RNCC: 5 | RNVC: 2
4001002113077: RNCC: 5 | RNVC: 2

16 Jan 2007

5120-12-346-0798
Hand Tube Flaring Tool

123460798
150105: RNCC: 3 | RNVC: 2

8 Jun 1998

5120-12-334-9409
Crimping Tool Die

123349409
VG95236T25A0002: RNCC: 2 | RNVC: 2
600325: RNCC: 3 | RNVC: 2
600325: RNCC: 5 | RNVC: 2
600325: RNCC: 5 | RNVC: 9
600325: RNCC: 5 | RNVC: 9
VG95236T03B002: RNCC: 5 | RNVC: 9

5 Jul 1994

5120-12-385-3541
Hous Mounting Tool

123853541
F6348778: RNCC: 3 | RNVC: 2

25 May 2011

5120-12-369-9523
Swivel Knob Jeweler's Screwdriver

123699523
T4840X ESD 5,5X60: RNCC: 3 | RNVC: 2
4840X ESD 5,5X60: RNCC: 5 | RNVC: 2
4840XESD-5,5X60: RNCC: 5 | RNVC: 9

30 Aug 2006

5120-12-172-0485
Socket Wrench

121720485
6400M5-5: RNCC: 3 | RNVC: 2
157279: RNCC: 5 | RNVC: 2

13 Dec 1977

5120-12-130-9340
Socket Wrench Socket

121309340
NO PRIMARY REF 12-130-9340: RNCC: 3 | RNVC: 2
109576: RNCC: 5 | RNVC: 9
7420Z5-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-8124
Kolben Spannband

121818124
2523-75: RNCC: 3 | RNVC: 9
VW123: RNCC: 3 | RNVC: 9

17 Dec 1979

5120-12-022-8157

5120-12-326-1876
Mechanical Puller

123261876
1215 9723: RNCC: 3 | RNVC: 2
6.226.0.690.009.6: RNCC: 5 | RNVC: 2

15 Aug 1991

5120-12-351-9559
Socket Head Screw Key

123519559
ISO2936-0,9: RNCC: 2 | RNVC: 2

20 Sep 2000

5120-12-380-0925
Seal Inserter

123800925
80996040129: RNCC: 3 | RNVC: 2
80.99604-0129: RNCC: 5 | RNVC: 2

25 Sep 2009

5120-12-392-4874
Pip Jointing Clamp

123924874
690.476.00.1: RNCC: 3 | RNVC: 2

12 Jun 2013

5120-12-171-1938
Spanner Wrench

121711938
DIN1810-B95-100: RNCC: 2 | RNVC: 2
08062012110: RNCC: 3 | RNVC: 2
B95-100DIN1810: RNCC: 5 | RNVC: 2
DIN1810B95-100: RNCC: 5 | RNVC: 9

16 Sep 1977

5120-12-388-6943
Pipe Wrench

123886943
6558-14": RNCC: 3 | RNVC: 2
65580350: RNCC: 5 | RNVC: 2

16 Apr 2012

5120-12-151-6734
Electron Tube Extractor

121516734
52-1300-000-00: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-178-8344
Mechanical Puller

121788344
3906-21000-000: RNCC: 3 | RNVC: 2
WU62: RNCC: 5 | RNVC: 2

18 May 1979

5120-12-126-3297
Pliers

121263297
TL5180-0058-22: RNCC: 2 | RNVC: 2
107243: RNCC: 5 | RNVC: 9
3426: RNCC: 5 | RNVC: 9
5180-0058-22: RNCC: 5 | RNVC: 9
5180-058-22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-0930
Box Wrench

121270930
DIN837-A25X28: RNCC: 2 | RNVC: 2
A25X28DIN837: RNCC: 5 | RNVC: 2
A25X28DIN837GALNI8: RNCC: 5 | RNVC: 9
22-25X28: RNCC: 5 | RNVC: 9
41062528: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-0804
Torque Wrench Adapter

121940804
TL5120-0086-030: RNCC: 2 | RNVC: 2
7452-7 9: RNCC: 5 | RNVC: 9
20/DC-9: RNCC: 5 | RNVC: 9
6263110003: RNCC: 5 | RNVC: 9
6450C-9: RNCC: 5 | RNVC: 9
731/10 9: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-155-9670
Flat Tip Screwdriver

121559670
C42407-Z5-C4: RNCC: 3 | RNVC: 2
C42407Z5C4: RNCC: 3 | RNVC: 2
131608: RNCC: 5 | RNVC: 9
8020N0-6X4-5X40: RNCC: 5 | RNVC: 9
C42407Z5C4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-186-6062
Torque Wrench Adapter

121866062
TL5120-0086-1000: RNCC: 2 | RNVC: 2
735/40: RNCC: 3 | RNVC: 2
6264400002: RNCC: 5 | RNVC: 9
6406: RNCC: 5 | RNVC: 9
F30027342: RNCC: 5 | RNVC: 9
65760-2-3/4: RNCC: 5 | RNVC: 9
8952-1: RNCC: 5 | RNVC: 9
30/DCA-3/4: RNCC: 5 | RNVC: 9
15174: RNCC: 5 | RNVC: 9
735-40: RNCC: 5 | RNVC: 9

21 Jan 1981

5120-12-195-6983
Spanner Wrench

121956983
4001900-00252: RNCC: 3 | RNVC: 2

30 Mar 1983

5120-12-182-7348
Cable Type Ratchet Lever Puller

121827348
6169: RNCC: 3 | RNVC: 9
65-7723-500-02: RNCC: 5 | RNVC: 2
TU16: RNCC: 5 | RNVC: 2
13C00-1220-09-002: RNCC: 5 | RNVC: 2

22 Feb 1980

5120-12-170-4739
Ausziehvorrichtung

121704739
150800: RNCC: 3 | RNVC: 2
99366601: RNCC: 3 | RNVC: 2
150800: RNCC: 5 | RNVC: 2
8207162: RNCC: 5 | RNVC: 2
8410099: RNCC: 5 | RNVC: 2
89415105: RNCC: 5 | RNVC: 2
698-756-0010: RNCC: 5 | RNVC: 2
3-113-KHD: RNCC: 5 | RNVC: 2

14 Jul 1977

5120-12-141-9792
Open End Wrench

121419792
571A203B1 1-2IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-334-2787
Screwdriver Bit

123342787
4040-1,0X7: RNCC: 3 | RNVC: 2
2321-1: RNCC: 3 | RNVC: 2
05072561001: RNCC: 3 | RNVC: 2
072561: RNCC: 3 | RNVC: 9
3676140001: RNCC: 5 | RNVC: 2
2097S 1,0X7,0X40: RNCC: 5 | RNVC: 2
20975-1,0: RNCC: 5 | RNVC: 9

21 Apr 1994

5120-12-324-1269
Craftsman's Tweezers

123241269
TL5120-0109-L010: RNCC: 2 | RNVC: 2
R32: RNCC: 3 | RNVC: 2
5-115: RNCC: 3 | RNVC: 2
9294160: RNCC: 3 | RNVC: 9

23 Jan 1991

5120-12-338-6549
Ge Montierwerkzeug

123386549
4900059-752170.000.0: RNCC: 3 | RNVC: 2

10 Aug 1995

5120-12-127-4465
Mechanical Puller

121274465
88210-2: RNCC: 3 | RNVC: 2
118-2: RNCC: 3 | RNVC: 2
881180-2: RNCC: 3 | RNVC: 2
204-2: RNCC: 3 | RNVC: 2
88210-2: RNCC: 5 | RNVC: 2
83.09143.6060: RNCC: 5 | RNVC: 2
713A050-80: RNCC: 5 | RNVC: 2
88010-1: RNCC: 5 | RNVC: 9
88010-1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-324-1257
Seal Inserter

123241257
460589151500: RNCC: 3 | RNVC: 2

23 Jan 1991

5120-12-328-6981
Mechanical Puller

123286981
F6379020: RNCC: 3 | RNVC: 2

16 Jun 1992

5120-12-325-9026
Combination Box And Open End Wrench

123259026
2060140: RNCC: 3 | RNVC: 2

22 Jul 1991

5120-12-303-8473
Torque Wrench

123038473
2300007-266900.000.0: RNCC: 1 | RNVC: 2
2300007-266900.000.0: RNCC: 3 | RNVC: 2
2300007-266900.000.0: RNCC: 3 | RNVC: 2
2300007-266900.000.0: RNCC: 5 | RNVC: 9

7 May 1985

5120-12-168-6373

5120-12-184-9726
Spanner Wrench

121849726
702742-8102W2: RNCC: 3 | RNVC: 2
702742-8102W2: RNCC: 5 | RNVC: 9

28 Aug 1980

5120-12-325-8914
Spanner Wrench

123258914
108589003100: RNCC: 3 | RNVC: 2
109 589 00 31 00: RNCC: 5 | RNVC: 2

18 Jul 1991

5120-12-384-3084
Spanner Wrench

123843084
F6553658: RNCC: 3 | RNVC: 2

11 Feb 2011

5120-12-181-9121
Mechanical Puller

121819121
317589023500: RNCC: 3 | RNVC: 9

21 Dec 1979

5120-12-123-5859

5120-12-333-5678
Drive Pin Punch

123335678
076-240080-904-0: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-345-4800
Socket Head Screw Key Set

123454800
10766/6: RNCC: 3 | RNVC: 2
96432201: RNCC: 5 | RNVC: 2

23 Mar 1998

5120-12-328-0835
Spanner Wrench

123280835
11190101: RNCC: 2 | RNVC: 2
11190101: RNCC: 3 | RNVC: 2

3 Apr 1992

5120-12-336-5064
Bearing And Bushing Inserter

123365064
0851 6694: RNCC: 3 | RNVC: 2
8516694: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-323-4096
Woven Cable Grip

123234096
01579: RNCC: 3 | RNVC: 2

23 Nov 1990

5120-12-379-8180
Socket Wrench Screwdriver Attachment Set

123798180
54CV/9: RNCC: 3 | RNVC: 2
96030901: RNCC: 5 | RNVC: 2
4018754108657: RNCC: 5 | RNVC: 2

4 Sep 2009

5120-12-374-3952
Drive Pin Punch Set

123743952
96700701-TCS: RNCC: 3 | RNVC: 2

13 Feb 2008

5120-12-313-7827
Pliers

123137827
940VDE1: RNCC: 3 | RNVC: 2

5 May 1988

5120-12-123-5117
Open End Wrench

121235117
6-6X8: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-363-9697
Bearing And Bushing Inserter

123639697
T671P5002220: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-070-0172

5120-12-303-8624
Socket Wrench Set

123038624
X802: RNCC: 2 | RNVC: 9
15GE-CS: RNCC: 3 | RNVC: 9
5120-00366: RNCC: 6 | RNVC: 9

9 May 1985

5120-12-343-6140
Spanner Wrench

123436140
748.192.4: RNCC: 3 | RNVC: 2

8 Jul 1997

5120-12-124-8495
Kuehl Abziehbuegel

121248495
FW279D: RNCC: 3 | RNVC: 2
35-10-08: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-167-9548
Spanner Wrench

121679548
12709-21000W5: RNCC: 2 | RNVC: 2
335912-9013.000: RNCC: 3 | RNVC: 2
12709-21000W5: RNCC: 5 | RNVC: 2
12709-21000W5: RNCC: 5 | RNVC: 2
335912-9013.000: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-319-5741
Socket Wrench Handle

123195741
60600001: RNCC: 3 | RNVC: 2

13 Oct 1989

5120-12-393-2892
Socket Wrench Socket

123932892
SEWZG029: RNCC: 3 | RNVC: 2

4 Sep 2013

5120-12-023-1510

5120-12-364-5510
Box Wrench

123645510
41050607-TCS: RNCC: 3 | RNVC: 2

8 Oct 2004

5120-12-384-1205
Plier Wrench

123841205
1300-150: RNCC: 3 | RNVC: 2

24 Jan 2011

5120-12-134-2721
Auf- U Druckstueck

121342721
007M00502: RNCC: 3 | RNVC: 2
007M00702: RNCC: 5 | RNVC: 2
VM68674-4: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-342-0110
Mechanical Puller

123420110
111800: RNCC: 3 | RNVC: 2
111800: RNCC: 5 | RNVC: 2
0111800: RNCC: 5 | RNVC: 9

29 Nov 1996

5120-12-340-8620
Screwdriver Bit

123408620
VG95211-ML-123408620: RNCC: 2 | RNVC: 2
54.1320.400.99: RNCC: 3 | RNVC: 2

22 Jun 1996

5120-12-191-6910
Spanner Wrench

121916910
DIN14822-BC-ST: RNCC: 2 | RNVC: 2
44912: RNCC: 3 | RNVC: 2
081918600420: RNCC: 5 | RNVC: 2
02.065.00040: RNCC: 5 | RNVC: 2
0819 18600 420: RNCC: 5 | RNVC: 2
D9597-965: RNCC: 5 | RNVC: 9
2000.09-1015: RNCC: 5 | RNVC: 9

23 Feb 1982

5120-12-123-4843
Open End Wrench

121234843
DIN133-80: RNCC: 2 | RNVC: 2
452-80: RNCC: 3 | RNVC: 2
2300-80: RNCC: 3 | RNVC: 2
133-80: RNCC: 3 | RNVC: 2
80DIN133: RNCC: 5 | RNVC: 2
1102110013: RNCC: 5 | RNVC: 9
50600: RNCC: 5 | RNVC: 9
571A301-80: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-377-5595
Ka Montierwerkzeug

123775595
313313: RNCC: 3 | RNVC: 2
0853-03-23-00/37: RNCC: 5 | RNVC: 2

26 Jan 2009

5120-12-180-5451
Mechanical Puller

121805451
3907-39000-000: RNCC: 3 | RNVC: 2
83.09143-6008: RNCC: 5 | RNVC: 2
83091436008: RNCC: 5 | RNVC: 2

17 Sep 1979

5120-12-315-5207
Torque Wrench

123155207
C79451-A3085-B239: RNCC: 3 | RNVC: 2

1 Nov 1988

5120-12-383-8685
Ball Joint Removal Tool

123838685
KL-0163-1: RNCC: 3 | RNVC: 2

15 Dec 2010

5120-12-359-6139
Bearing And Bushing Inserter And Remover

123596139
T631P3002051: RNCC: 3 | RNVC: 2

21 Feb 2003

5120-12-371-9374
Flat Tip And Cross Tip Screwdriver Set

123719374
585067: RNCC: 3 | RNVC: 2
4007875850675: RNCC: 5 | RNVC: 2

31 May 2007

5120-12-166-0234
Socket Wrench Adapter

121660234
7409H1: RNCC: 3 | RNVC: 2
121835: RNCC: 5 | RNVC: 2

24 Jul 1976

5120-12-364-7223
Montage- Hebel

123647223
5583590: RNCC: 3 | RNVC: 2
5583590: RNCC: 8 | RNVC: 2
(241)A42495583590: RNCC: 8 | RNVC: 2

22 Oct 2004

5120-12-373-5077
Offset Screwdriver

123735077
000000-0454.683: RNCC: 3 | RNVC: 2
S3105: RNCC: 5 | RNVC: 2

9 Nov 2007

5120-12-177-5878
Dreh- Griff

121775878
0005830443: RNCC: 3 | RNVC: 2
3A687: RNCC: 5 | RNVC: 2

7 Feb 1979

5120-12-189-4699
Bearing And Bushing Inserter

121894699
321589041500: RNCC: 3 | RNVC: 2

29 Sep 1981

5120-12-367-9650
Mechanical Puller

123679650
714523090: RNCC: 3 | RNVC: 2

10 Nov 2005

5120-12-194-9815
Mechanical Puller

121949815
1X56136315: RNCC: 3 | RNVC: 2

23 Dec 1982

5120-12-027-9640

5120-12-358-4056
Crimping Tool Die

123584056
974908: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-12-022-5661

5120-12-010-1371

5120-12-300-2877
Flat Tip Screwdriver

123002877
8060VDE-0,8X5,5X125: RNCC: 3 | RNVC: 2
169153: RNCC: 5 | RNVC: 2
8060-0,8X5,5X125: RNCC: 5 | RNVC: 2

20 Jul 1984

5120-12-133-3665
Kolben Einfuehrring

121333665
858-181: RNCC: 3 | RNVC: 2
S633-240: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-391-9072
Mecha Ejector Tool

123919072
1511: RNCC: 3 | RNVC: 2
78600001: RNCC: 5 | RNVC: 2

17 Apr 2013

5120-12-148-0354

5120-12-150-0996
Socket Head Screw Key

121500996
NM290-96: RNCC: 3 | RNVC: 2
6AWN479NM: RNCC: 5 | RNVC: 2
AWN479-6NM: RNCC: 5 | RNVC: 2
6AWN479NM: RNCC: 5 | RNVC: 2
AWN479-6NM: RNCC: 5 | RNVC: 2
NM290-96: RNCC: 5 | RNVC: 9
6AWN479NM: RNCC: 5 | RNVC: 9
AWN479-6NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-151-6583
Eindrueckvorrichtun

121516583
WKW9008-0900V15: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-179-5370
Pliers

121795370
0003-3547-170: RNCC: 3 | RNVC: 2
0003-3547-170: RNCC: 5 | RNVC: 9

4 Jul 1979

5120-12-393-6998
Mechanical Puller Body

123936998
A-0261-001-13: RNCC: 3 | RNVC: 2

2 Oct 2013

5120-12-345-4211
Seal Inserter

123454211
F3 0270376: RNCC: 3 | RNVC: 2

12 Mar 1998

5120-12-385-3562
Pull And Press Tool

123853562
F6379019: RNCC: 3 | RNVC: 2

26 May 2011

5120-12-338-2582
Torque Wrench

123382582
001589620900: RNCC: 3 | RNVC: 2
001 589 62 09 00: RNCC: 5 | RNVC: 2

12 Jun 1995

5120-12-371-2528
Carpenters' Pincers

123712528
5001300: RNCC: 3 | RNVC: 2
4003773016915: RNCC: 5 | RNVC: 2
00.16.30.78: RNCC: 5 | RNVC: 2

6 Mar 2007

5120-12-394-0151
C Clamp

123940151
AM4: RNCC: 3 | RNVC: 2

29 Oct 2013

5120-12-308-4003
Spanner Wrench

123084003
2500096-360279.00.0: RNCC: 2 | RNVC: 2
2500096-360279.00.0: RNCC: 3 | RNVC: 2
2500096-360279.00.0: RNCC: 5 | RNVC: 9

6 Oct 1986

5120-12-350-4686
Schluessel

123504686
2300281-264000.002.0: RNCC: 2 | RNVC: 2
2300281-264000.002.0: RNCC: 3 | RNVC: 2

4 Apr 2000

5120-12-317-3629
Machinist's Vise

123173629
WSM9: RNCC: 3 | RNVC: 2

3 Apr 1989

5120-12-379-8457
Hand Pipe And Sewer Auger

123798457
7.2490: RNCC: 3 | RNVC: 2

8 Sep 2009

5120-12-157-6766
Hand Terminal Crimping Tool

121576766
620.822-7: RNCC: 3 | RNVC: 2
WZ13: RNCC: 3 | RNVC: 2
C 5734 527 Q: RNCC: 5 | RNVC: 2
WZ13ABF: RNCC: 5 | RNVC: 2
C 5734 527 Q: RNCC: 5 | RNVC: 2
W5734527Q: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-326-0069
Mechanical Puller

123260069
2500194-992460.000.0: RNCC: 2 | RNVC: 2
2500194-992460.000.0: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-371-5298
Ausdrueckwerkzeug

123715298
2300264-264100.01.0: RNCC: 3 | RNVC: 2

13 Apr 2007

5120-12-156-3107
Hebel

121563107
144006202: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-157-9816
Spanner Wrench

121579816
1X56099046: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-329-4591
Socket Wrench

123294591
LS-N 608 04: RNCC: 3 | RNVC: 2

21 Aug 1992

5120-12-344-8002
Socket Wrench Adapter

123448002
2500261-970000.003.0: RNCC: 2 | RNVC: 2
2500261-970000.003.0: RNCC: 5 | RNVC: 2

10 Dec 1997

5120-12-140-4745
Drill Drift

121404745
DIN317-5: RNCC: 2 | RNVC: 2
017079: RNCC: 3 | RNVC: 2
01.08.69.05: RNCC: 5 | RNVC: 2
5DIN317: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-180-0268
Dorn

121800268
01TC30091: RNCC: 3 | RNVC: 2

17 Aug 1979

5120-12-121-6976
Shovel Handle

121216976
NO PRIMARY REF 12-121-6976: RNCC: 3 | RNVC: 2
BK1-1250DIN20152-ES: RNCC: 5 | RNVC: 9
BK1250DIN20152ESCHE: RNCC: 5 | RNVC: 9
DIN20152-BK1-1250-ES: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-168-3042
Jack Elevating Block

121683042
81669370001: RNCC: 3 | RNVC: 2
81.66937-0001: RNCC: 5 | RNVC: 2
23230-261607-001-0: RNCC: 5 | RNVC: 9
23230-261607.001.0: RNCC: 5 | RNVC: 9

7 Mar 1977

5120-12-346-6843
Combination Box And Open End Wrench Set

123466843
203-S12-M-SB: RNCC: 3 | RNVC: 2

25 Aug 1998

5120-12-141-2558
Torque Wrench

121412558
TESI250FU: RNCC: 3 | RNVC: 2
25035000: RNCC: 5 | RNVC: 2
131245: RNCC: 5 | RNVC: 9
154547: RNCC: 5 | RNVC: 9
8170: RNCC: 5 | RNVC: 9
8175N: RNCC: 5 | RNVC: 9
5120-40512: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-337-1932
Valve Spring Compressor

123371932
11.49028-0299: RNCC: 3 | RNVC: 2
113.112: RNCC: 5 | RNVC: 2

31 Jan 1995

5120-12-180-0984
Ausziehvorrichtung

121800984
VG95211-ML-121800984: RNCC: 2 | RNVC: 2
P-895005-403: RNCC: 3 | RNVC: 2
P895005-403: RNCC: 5 | RNVC: 2

20 Aug 1979

5120-12-379-2840
Piston Ring Compressor

123792840
6397450: RNCC: 3 | RNVC: 2
6397450: RNCC: 3 | RNVC: 2
N4453: RNCC: 3 | RNVC: 2
126/2-120: RNCC: 5 | RNVC: 2
3556080: RNCC: 5 | RNVC: 2

9 Jul 2009

5120-12-171-0611
Spanner Wrench

121710611
12706-1240-004W1: RNCC: 2 | RNVC: 2
335930-9008.000: RNCC: 3 | RNVC: 2
12706-1240.004W1: RNCC: 5 | RNVC: 2
12706-1240-004W1: RNCC: 5 | RNVC: 9
335930-9008.000: RNCC: 5 | RNVC: 9

5 Sep 1977

5120-12-185-3661
Box Wrench

121853661
DIN3521-46: RNCC: 2 | RNVC: 2
46DIN3521: RNCC: 5 | RNVC: 2

30 Sep 1980

5120-12-152-0738
Montage- Hebel

121520738
23111-7102.10: RNCC: 2 | RNVC: 2
23111-7102.10: RNCC: 3 | RNVC: 2
1115065: RNCC: 5 | RNVC: 9
23111-7102-10: RNCC: 5 | RNVC: 9
23111-7102-10: RNCC: 5 | RNVC: 9
23111-7102-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-0537
Ratchet Wrench

121940537
NO PRIMARY REF 12-194-0537: RNCC: 3 | RNVC: 2
512V16: RNCC: 5 | RNVC: 9

28 Sep 1982

5120-12-199-6976
Spanner Wrench

121996976
52106-090: RNCC: 3 | RNVC: 2
628100-155/8: RNCC: 3 | RNVC: 2
776C90-155/8: RNCC: 3 | RNVC: 2
885182808: RNCC: 5 | RNVC: 2
62810-155/8: RNCC: 5 | RNVC: 2
51904: RNCC: 5 | RNVC: 2

24 May 1984

5120-12-325-6283
Open End Wrench

123256283
000589160100: RNCC: 3 | RNVC: 2
000 589 16 01 00: RNCC: 5 | RNVC: 2

24 Jun 1991

5120-12-310-2948

5120-12-387-9454
Open End Wrench

123879454
437589000100: RNCC: 3 | RNVC: 2
7090093: RNCC: 5 | RNVC: 2

10 Feb 2012

5120-12-330-7071
Blindni Mundstueck

123307071
10/24: RNCC: 3 | RNVC: 2

28 Jan 1993

5120-12-384-3141
Mechanical Puller Forcing Screw

123843141
F6781539: RNCC: 3 | RNVC: 2

11 Feb 2011

5120-12-041-6003

5120-12-149-0359
Spanner Wrench

121490359
SK27594T3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-337-1532
Hammer Aufnahme

123371532
111-25: RNCC: 3 | RNVC: 2
4201990030: RNCC: 5 | RNVC: 2

26 Jan 1995

5120-12-312-8096
Hand Beading Tool

123128096
2.6037: RNCC: 3 | RNVC: 2
180582: RNCC: 5 | RNVC: 9
4481 ZA: RNCC: 5 | RNVC: 9

8 Feb 1988

5120-12-176-2822
Hand Hydraulic Jack

121762822
23290-268060: RNCC: 2 | RNVC: 2
V4940102400: RNCC: 5 | RNVC: 9

23 Nov 1978

5120-12-170-8648
Spanner Wrench

121708648
205595: RNCC: 3 | RNVC: 2
205595: RNCC: 5 | RNVC: 2
205595: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-330-6094
Hand Beading Tool

123306094
165: RNCC: 3 | RNVC: 2

15 Jan 1993

5120-12-335-4100
Socket Wrench Socket

123354100
0852 5011: RNCC: 3 | RNVC: 2
8525011: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-371-8574
Montierhuelse

123718574
2300264-264100.03.0: RNCC: 3 | RNVC: 2

23 May 2007

5120-12-333-3482
Socket Wrench Set

123333482
884ZN-1: RNCC: 3 | RNVC: 2

6 Dec 1993

5120-12-137-3279

5120-12-367-8660
Socket Head Screw Key

123678660
TL5120-0132-I11: RNCC: 2 | RNVC: 2
10766-T40: RNCC: 3 | RNVC: 2
52537650966: RNCC: 5 | RNVC: 2
52537650966: RNCC: 5 | RNVC: 2
43220040: RNCC: 5 | RNVC: 2

25 Oct 2005

5120-12-130-6343
Ratchet Wrench

121306343
31KR20-36: RNCC: 3 | RNVC: 2
20-36DWN29: RNCC: 5 | RNVC: 9
90196: RNCC: 5 | RNVC: 9
209651: RNCC: 5 | RNVC: 9
31-36: RNCC: 5 | RNVC: 9
31KR36: RNCC: 5 | RNVC: 9
31-2036: RNCC: 5 | RNVC: 9
31-2036: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-369-4604
Multiposition Vise

123694604
9-225: RNCC: 3 | RNVC: 2
00.10.53.83: RNCC: 5 | RNVC: 2

6 Jul 2006

5120-12-381-4765
Torque Wrench

123814765
26463: RNCC: 3 | RNVC: 2
2852-1,0-5,0: RNCC: 5 | RNVC: 2

22 Feb 2010

5120-12-169-3205
Tire Iron

121693205
0005812458: RNCC: 3 | RNVC: 2

4 May 1977

5120-12-139-2542
Abziehvorrichtung

121392542
006M04700: RNCC: 3 | RNVC: 2
VM78690: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-129-3305

5120-12-171-2815
Bolzen

121712815
105-31702W4.01: RNCC: 3 | RNVC: 2
105-31702W4-01: RNCC: 5 | RNVC: 2

26 Sep 1977

5120-12-321-9870
Drive Pin Punch

123219870
790508577: RNCC: 3 | RNVC: 2
3201-750.02.00.057-001: RNCC: 5 | RNVC: 2

16 Jul 1990

5120-12-335-9556
Open End Wrench

123359556
DIN895-27X30: RNCC: 2 | RNVC: 2
8590381102339: RNCC: 5 | RNVC: 2
895-27X30: RNCC: 5 | RNVC: 2
CSN230610-27X30: RNCC: 5 | RNVC: 2

6 Oct 1994

5120-12-318-7597
Mechanical Puller Attachment

123187597
619-45.10.710-05: RNCC: 3 | RNVC: 2

15 Aug 1989

5120-12-141-2952
Torque Wrench

121412952
NO PRIMARY REF 12-141-2952: RNCC: 3 | RNVC: 2
131233: RNCC: 5 | RNVC: 9
7470: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-329-6397
Flat Tip Screwdriver

123296397
1600-017-1: RNCC: 3 | RNVC: 2

11 Sep 1992

5120-12-385-0516
Sealant Dispenser

123850516
089100: RNCC: 3 | RNVC: 2
A0891 00: RNCC: 5 | RNVC: 2
391931131209: RNCC: 6 | RNVC: 9

26 Apr 2011

5120-12-384-9733
Socket Wrench Set

123849733
911.0620: RNCC: 3 | RNVC: 2

14 Apr 2011

5120-12-176-5034

5120-12-392-7418
Open End Box Wrench

123927418
SEWZG022: RNCC: 3 | RNVC: 2

3 Jul 2013

5120-12-342-1457
Hand Terminal Crimping Tool

123421457
210790: RNCC: 3 | RNVC: 2

18 Dec 1996

5120-12-144-2092
Open End Wrench

121442092
837589030100: RNCC: 3 | RNVC: 2
8375890301: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-355-4420
Box Wrench

123554420
XLE1416: RNCC: 3 | RNVC: 2
08.06006.1317: RNCC: 5 | RNVC: 2

15 Nov 2001

5120-12-305-8602
Gelenkhebel- Heber

123058602
4900059-752050.000.0: RNCC: 2 | RNVC: 2
4900059-752050.000.0: RNCC: 3 | RNVC: 2

27 Dec 1985

5120-12-196-0088
Socket Head Screw Key

121960088
127612U: RNCC: 3 | RNVC: 2

13 May 1983

5120-12-180-5476
Tool Handle Wedge

121805476
6798-3: RNCC: 3 | RNVC: 9
3575-1: RNCC: 5 | RNVC: 9

17 Sep 1979

5120-12-133-3987
Screwdriver Bit

121333987
75M10: RNCC: 3 | RNVC: 2
109185: RNCC: 5 | RNVC: 2
7090M10: RNCC: 5 | RNVC: 9
840-2-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-376-7086
Open End Wrench

123767086
0012427S: RNCC: 3 | RNVC: 2
NNOK2427: RNCC: 5 | RNVC: 2
38409: RNCC: 5 | RNVC: 2

30 Oct 2008

5120-12-341-1592
Torque Wrench

123411592
753-04: RNCC: 3 | RNVC: 2

2 Aug 1996

5120-12-367-9668
Hand Terminal Crimping Tool

123679668
8102: RNCC: 3 | RNVC: 2
6724080: RNCC: 5 | RNVC: 2

10 Nov 2005

5120-12-312-9987
Lager- Und Einsatz

123129987
000589534300: RNCC: 3 | RNVC: 2
7083625: RNCC: 5 | RNVC: 2

24 Feb 1988

5120-12-323-7459
Hand Beading Tool

123237459
15339801: RNCC: 3 | RNVC: 2
BN511496: RNCC: 5 | RNVC: 2

13 Dec 1990

5120-12-362-6545
Socket Wrench Set

123626545
54.0084.960.57: RNCC: 3 | RNVC: 2
6721NM: RNCC: 5 | RNVC: 2

16 Mar 2004

5120-12-190-7331
Spannvorrichtung

121907331
6008R-1000.00.0: RNCC: 2 | RNVC: 2
6008R-1000.00.0: RNCC: 3 | RNVC: 2
5120121907331: RNCC: 5 | RNVC: 2
6008R-1000.00.0: RNCC: 5 | RNVC: 2
6008R-1000.00.0: RNCC: 5 | RNVC: 9

10 Dec 1981

5120-12-155-9373
Socket Wrench Handle Bar

121559373
NM011-5-2: RNCC: 3 | RNVC: 2
NM011-5-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-308-1336
Box Wrench

123081336
03.339.04.02.0: RNCC: 3 | RNVC: 2
65.202.015.27: RNCC: 5 | RNVC: 2
D-03.339.04.02.0: RNCC: 5 | RNVC: 2

4 Sep 1986

5120-12-184-7141
Drive Pin Punch

121847141
0852 2030: RNCC: 3 | RNVC: 2
8522030: RNCC: 5 | RNVC: 2

14 Aug 1980

5120-12-313-6562
Werkst Druckstueck

123136562
30-11: RNCC: 3 | RNVC: 2

22 Apr 1988

5120-12-315-2690
Spanner Wrench

123152690
C42407-A11-A1: RNCC: 3 | RNVC: 2

7 Oct 1988

5120-12-146-5263
Socket Wrench

121465263
62220-17: RNCC: 3 | RNVC: 2
91598846: RNCC: 5 | RNVC: 2
105344: RNCC: 5 | RNVC: 9
1945NBM17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-387-1288
Electrical Contact Remover

123871288
1230-13601: RNCC: 3 | RNVC: 2
80.99606-6136: RNCC: 5 | RNVC: 2
80996066136: RNCC: 5 | RNVC: 2

8 Nov 2011

5120-12-154-1032
Face Spanner Wrench Socket

121541032
CH2521-10: RNCC: 3 | RNVC: 2
839589360700: RNCC: 5 | RNVC: 2
CH2521-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-004-0144

5120-12-300-8565
Mechanical Puller

123008565
1423-200.101: RNCC: 3 | RNVC: 2
A37401: RNCC: 5 | RNVC: 2

5 Sep 1984

5120-12-337-1800
Mechanical Puller

123371800
0851 1408: RNCC: 3 | RNVC: 2
8511408: RNCC: 5 | RNVC: 2

30 Jan 1995

5120-12-094-0086

5120-12-146-2825
Lenkrada Druckring

121462825
0005894033: RNCC: 3 | RNVC: 2
000589403300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-358-2646
Screwdriver Bit

123582646
614784045: RNCC: 3 | RNVC: 2
614 784 045: RNCC: 5 | RNVC: 2

2 Oct 2002

5120-12-358-2508
Screwdriver Bit

123582508
614786085: RNCC: 3 | RNVC: 2
614 786 085: RNCC: 5 | RNVC: 2

1 Oct 2002

5120-12-325-8808
Bearing And Bushing Inserter

123258808
385589001400: RNCC: 3 | RNVC: 2

17 Jul 1991

5120-12-326-5286
Bearing And Bushing Inserter

123265286
4900329: RNCC: 3 | RNVC: 2

1 Oct 1991

5120-12-349-4032
Mechanical Puller

123494032
0986617240: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-091-4777

5120-12-025-8804

5120-12-139-8430
Abziehvorrichtung

121398430
1365890133: RNCC: 3 | RNVC: 2
136589013300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-183-7949
Aufziehvorrichtung

121837949
S51624-0000: RNCC: 3 | RNVC: 2

20 May 1980

5120-12-343-9049
Socket Wrench Set

123439049
R493-8M: RNCC: 3 | RNVC: 2
00493744082: RNCC: 5 | RNVC: 2

13 Aug 1997

5120-12-379-7187
Socket Wrench

123797187
2809990065: RNCC: 3 | RNVC: 2
CCS/8500/004: RNCC: 5 | RNVC: 2

26 Aug 2009

5120-12-313-6567
Bearing And Bushing Inserter

123136567
32-109: RNCC: 3 | RNVC: 2
32109: RNCC: 5 | RNVC: 2

22 Apr 1988

5120-12-168-6773
Einstell- Dorn

121686773
4900073-024000: RNCC: 3 | RNVC: 2
4900073-024000: RNCC: 5 | RNVC: 2
105812U: RNCC: 5 | RNVC: 9
105812U: RNCC: 5 | RNVC: 9

28 Mar 1977

5120-12-369-6149
Box Wrench

123696149
E000-08101: RNCC: 3 | RNVC: 2

1 Aug 2006

5120-12-338-3929
Torque Wrench

123383929
5121-1CT: RNCC: 3 | RNVC: 2
99389813: RNCC: 5 | RNVC: 2
6160400002: RNCC: 5 | RNVC: 9
5121CT: RNCC: 5 | RNVC: 9

3 Jul 1995

5120-12-175-1036
Schraube

121751036
VG95211-ML-121751036: RNCC: 2 | RNVC: 2
1X56 131 402-20: RNCC: 3 | RNVC: 2
1X56131402-20: RNCC: 5 | RNVC: 2

23 Aug 1978

5120-12-194-6331
Spanner Wrench

121946331
DIN3116-A40: RNCC: 2 | RNVC: 2
DIN3116A40: RNCC: 3 | RNVC: 2
44511: RNCC: 5 | RNVC: 2
DIN3116A40: RNCC: 5 | RNVC: 9

23 Nov 1982

5120-12-368-8394
Socket Wrench

123688394
88971186006: RNCC: 3 | RNVC: 2
88.97118-6006: RNCC: 5 | RNVC: 2

26 Apr 2006

5120-12-120-2315
Paint Strainer

121202315
293-180MITTEL: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-091-6747

5120-12-360-4961
Driftpin

123604961
CBD30032P01: RNCC: 3 | RNVC: 2

27 May 2003

5120-12-022-8066

5120-12-336-5077
Seal Inserter

123365077
0851 6693: RNCC: 3 | RNVC: 2
8516693: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-189-9727
Bearing And Bushing Inserter

121899727
NO PRIMARY REF 12-189-9727: RNCC: 3 | RNVC: 2
416280: RNCC: 5 | RNVC: 9
416280: RNCC: 5 | RNVC: 9

29 Oct 1981

5120-12-151-5117
Schluessel

121515117
23111-6901-02: RNCC: 2 | RNVC: 2
23111-6901-02: RNCC: 5 | RNVC: 2
23111-6901-02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-165-4210
Inserted Hammer Face

121654210
E268-35: RNCC: 3 | RNVC: 9

29 Apr 1976

5120-12-371-1492
Mechanical Puller

123711492
F6456296: RNCC: 3 | RNVC: 2

21 Feb 2007

5120-12-005-0011

5120-12-120-9680

5120-12-321-1362
We Montierwerkzeug

123211362
550589045900: RNCC: 3 | RNVC: 2

2 Apr 1990

5120-12-340-7224
Valve Spring Compressor

123407224
1212 8443: RNCC: 3 | RNVC: 2

30 May 1996

5120-12-370-3198
Ratchet Wrench Set

123703198
96835605-TCS: RNCC: 3 | RNVC: 2

25 Oct 2006

5120-12-369-3773
Mitnehmersch Stift

123693773
52613: RNCC: 3 | RNVC: 2

27 Jun 2006

5120-12-091-1606

5120-12-145-0981

5120-12-355-4994
Socket Wrench Screwdriver Attachment

123554994
5555222: RNCC: 3 | RNVC: 2

20 Nov 2001

5120-12-139-3129
Oe Verbindungsrohr

121393129
8395890090: RNCC: 3 | RNVC: 2
839589009000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-332-6042
Bearing And Bushing Inserter

123326042
3074: RNCC: 3 | RNVC: 2

26 Aug 1993

5120-12-094-1537

5120-12-094-1282

5120-12-092-2258

5120-12-171-6845
Mechanical Puller Attachment

121716845
220-4: RNCC: 3 | RNVC: 2
108140: RNCC: 5 | RNVC: 9
4520D: RNCC: 5 | RNVC: 9

3 Nov 1977

5120-12-700-4744
Hand Intrenching Tool

127004744
52-01390010747: RNCC: 2 | RNVC: 2
187.001.000.000: RNCC: 5 | RNVC: 9

10 Sep 1992

5120-12-325-6285
Ku Montierwerkzeug

123256285
623589016100: RNCC: 3 | RNVC: 2

24 Jun 1991

5120-12-140-4474
Stuffing Box And Pump Packing Extractor

121404474
NO PRIMARY REF 12-140-4474: RNCC: 3 | RNVC: 2
10-200: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-163-4771
Box Wrench

121634771
DIN897-10X13: RNCC: 2 | RNVC: 2
23-10X13: RNCC: 3 | RNVC: 2
41071013: RNCC: 5 | RNVC: 2
10X13DIN897: RNCC: 5 | RNVC: 2
10X13DIN897GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-0061
Lamp Cap Extractor

121990061
2003 205: RNCC: 3 | RNVC: 2
300-0001: RNCC: 3 | RNVC: 2
300-0001D2714: RNCC: 5 | RNVC: 2

20 Mar 1984

5120-12-340-8295
Socket Head Screw Key Set

123408295
440/H6: RNCC: 3 | RNVC: 2
4400120: RNCC: 5 | RNVC: 2

20 Jun 1996

5120-12-171-7947
Spanner Wrench

121717947
8090-4X22X200: RNCC: 3 | RNVC: 2
131816: RNCC: 5 | RNVC: 2
8090-22: RNCC: 5 | RNVC: 2

14 Nov 1977

5120-12-123-4836
Open End Wrench

121234836
DIN133-46: RNCC: 2 | RNVC: 2
175-46: RNCC: 3 | RNVC: 2
2300-46: RNCC: 3 | RNVC: 2
133-46: RNCC: 3 | RNVC: 2
452-46: RNCC: 3 | RNVC: 2
46DIN133: RNCC: 5 | RNVC: 2
01750006: RNCC: 5 | RNVC: 2
571A301-46: RNCC: 5 | RNVC: 9
50530: RNCC: 5 | RNVC: 9
1102110006: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-308-0590
Wire Twister Pliers

123080590
NO PRIMARY REF 12-308-0590: RNCC: 3 | RNVC: 2
2855F12: RNCC: 5 | RNVC: 9
106929: RNCC: 5 | RNVC: 9
2855F-300: RNCC: 5 | RNVC: 9
2855F300: RNCC: 5 | RNVC: 9

26 Aug 1986

5120-12-388-1984
Hand Beading Tool

123881984
2193/4K: RNCC: 3 | RNVC: 2
4000896014088: RNCC: 5 | RNVC: 2

1 Mar 2012

5120-12-127-0929
Box Wrench

121270929
DIN837-A18X19: RNCC: 2 | RNVC: 2
22-18X19: RNCC: 3 | RNVC: 2
A18X19DIN837: RNCC: 5 | RNVC: 2
41061819: RNCC: 5 | RNVC: 2
A18X19DIN837GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-140-9690
Mechanical Puller

121409690
0276 150 205: RNCC: 3 | RNVC: 2
0277075005: RNCC: 5 | RNVC: 2
0276150005: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-354-7173
Torque Wrench

123547173
71/5: RNCC: 3 | RNVC: 2
5120-01172: RNCC: 6 | RNVC: 9

17 Aug 2001

5120-12-126-5489
Abzieher Haken

121265489
3035892333: RNCC: 3 | RNVC: 2
3035892333: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-329-2479
Torque Wrench

123292479
001589722100: RNCC: 3 | RNVC: 2

28 Jul 1992

5120-12-123-5889

5120-12-365-5405
Cross Tip Screwdriver

123655405
47301002-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-184-7715
Mechanical Puller

121847715
0851 0128: RNCC: 3 | RNVC: 2
8510128: RNCC: 5 | RNVC: 2

16 Aug 1980

5120-12-382-7716
Tool Handle Wedge

123827716
NO PRIMARY REF 12-382-7716: RNCC: 3 | RNVC: 2
68000025: RNCC: 5 | RNVC: 2

6 Aug 2010

5120-12-351-2764
Face Spanner Wrench Socket

123512764
3099-00-130000.06: RNCC: 3 | RNVC: 2

10 Jul 2000

5120-12-186-7342
Aufpreszvorrichtung

121867342
99346002: RNCC: 3 | RNVC: 2
410331: RNCC: 5 | RNVC: 9
410331: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-155-9411
Socket Wrench

121559411
NM289-04: RNCC: 3 | RNVC: 2
NM289-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-164-8076
Offset Screwdriver

121648076
NO PRIMARY REF 12-164-8076: RNCC: 3 | RNVC: 2
106080: RNCC: 5 | RNVC: 9
2049-13: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-0399
Socket Wrench

123680399
80996120022: RNCC: 3 | RNVC: 2
80.99612-022: RNCC: 5 | RNVC: 2

23 Nov 2005

5120-12-321-1375
Schluessel

123211375
272.369 547: RNCC: 2 | RNVC: 2
272.369 547: RNCC: 3 | RNVC: 2
CTWA-10: RNCC: 5 | RNVC: 2

2 Apr 1990

5120-12-379-6882
Torque Wrench

123796882
04W021-000: RNCC: 3 | RNVC: 2

24 Aug 2009

5120-12-158-9733
Electronic Equipment Alignment Tool

121589733
1-902: RNCC: 3 | RNVC: 2
700-2B: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-129-7603
Torque Wrench

121297603
NO PRIMARY REF 12-129-7603: RNCC: 3 | RNVC: 2
0005892821: RNCC: 5 | RNVC: 2
50030036: RNCC: 5 | RNVC: 9
50240036: RNCC: 5 | RNVC: 9
73-36: RNCC: 5 | RNVC: 9
73NM/36: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-5957
Schluessel

121465957
AW8559-940: RNCC: 3 | RNVC: 2
AW.8559.940.00-A001: RNCC: 5 | RNVC: 2
AW8559-940-00A001: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-172-6426
Spanner Wrench

121726426
DIN1810-B58-62: RNCC: 2 | RNVC: 2
40Z58-62: RNCC: 3 | RNVC: 2
B58-62DIN1810: RNCC: 5 | RNVC: 2
633712: RNCC: 5 | RNVC: 2
DIN1810B58-62: RNCC: 5 | RNVC: 9

3 Feb 1978

5120-12-171-3136
Rohr

121713136
VG95211-ML-121713136: RNCC: 2 | RNVC: 2
105-31702W12.02: RNCC: 3 | RNVC: 2
105-31702W12-02: RNCC: 5 | RNVC: 2

29 Sep 1977

5120-12-151-6684
Socket Wrench Adapter

121516684
NM303-03: RNCC: 3 | RNVC: 2
31-353-016-2: RNCC: 5 | RNVC: 2
NM303-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-360-3812
Montage- Hebel

123603812
8205892161/00: RNCC: 3 | RNVC: 2
820589216100: RNCC: 5 | RNVC: 9

15 May 2003

5120-12-176-5136
Mechanical Puller

121765136
80996010042: RNCC: 3 | RNVC: 2

5 Dec 1978

5120-12-175-3425
Hand Screw Starter

121753425
4.020173: RNCC: 3 | RNVC: 2
248D67: RNCC: 5 | RNVC: 9
248D67: RNCC: 5 | RNVC: 9
4.020173: RNCC: 5 | RNVC: 9

11 Sep 1978

5120-12-156-8068
Rohrtrage- Zange

121568068
100197-5000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-373-7705
Screwdriver And Wrench Assembly

123737705
227465: RNCC: 3 | RNVC: 2

5 Dec 2007

5120-12-190-5526
Lager- Und Einsatz

121905526
80996170099: RNCC: 3 | RNVC: 2
80.99617.0099: RNCC: 5 | RNVC: 2

2 Dec 1981

5120-12-094-1277

5120-12-135-1490

5120-12-343-3850
Bearing And Bushing Inserter

123433850
437589004300: RNCC: 3 | RNVC: 2
7083654: RNCC: 5 | RNVC: 2

12 Jun 1997

5120-12-311-9673
Spanner Wrench

123119673
5615890516/00: RNCC: 3 | RNVC: 2
CH1773-119FE: RNCC: 5 | RNVC: 2
561589051600: RNCC: 5 | RNVC: 2
CH1773-119FE: RNCC: 5 | RNVC: 9

5 Nov 1987

5120-12-356-2862
Socket Wrench Socket

123562862
80996030098: RNCC: 3 | RNVC: 2
80.99603-0098: RNCC: 5 | RNVC: 2

8 Feb 2002

5120-12-185-3138
Piston Ring Compressor

121853138
NO PRIMARY REF 12-185-3138: RNCC: 3 | RNVC: 2
VW123C: RNCC: 5 | RNVC: 2
2523-85: RNCC: 5 | RNVC: 9

25 Sep 1980

5120-12-379-1747
Bracing Device

123791747
8385891859/13: RNCC: 3 | RNVC: 2
8385891859/00 TEIL 8385891859/13: RNCC: 5 | RNVC: 2

30 Jun 2009

5120-12-371-4152
Pliers

123714152
2421 GC-180IP: RNCC: 3 | RNVC: 2
00.14.43.85: RNCC: 5 | RNVC: 2

27 Mar 2007

5120-12-309-6551
Spanner Wrench

123096551
335927-9005.000: RNCC: 3 | RNVC: 2
335927-9005.000: RNCC: 5 | RNVC: 9
33 59 27-9005.000: RNCC: 5 | RNVC: 9
335927-9005-000: RNCC: 5 | RNVC: 9

13 Feb 1987

5120-12-180-5457
Mechanical Puller Attachment

121805457
3907-29000-000: RNCC: 3 | RNVC: 2
83.09143-0019: RNCC: 5 | RNVC: 2
83091430019: RNCC: 5 | RNVC: 2

17 Sep 1979

5120-12-194-2811
Blindni Mundstueck

121942811
GS 2000-8C: RNCC: 3 | RNVC: 9
GS2000-8C: RNCC: 5 | RNVC: 9

19 Oct 1982

5120-12-164-6317
Spanner Wrench

121646317
390-098: RNCC: 3 | RNVC: 2
390-098: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-367-8855
Spanner Wrench

123678855
219456: RNCC: 3 | RNVC: 2

27 Oct 2005

5120-12-134-2635
Spannvorrichtung

121342635
014M05900: RNCC: 3 | RNVC: 2
VM53901: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-385-2933
Grommet Inserting Punch And Die

123852933
50.000.147: RNCC: 3 | RNVC: 2

18 May 2011

5120-12-353-4435
Screwdriver Bit

123534435
602-1-25MM: RNCC: 3 | RNVC: 2

23 Mar 2001

5120-12-314-1254
Torque Wrench

123141254
DSG5: RNCC: 3 | RNVC: 2

9 Jun 1988

5120-12-391-3260
Plug Electrical Connector Extractor

123913260
1577-1: RNCC: 3 | RNVC: 2
74615027: RNCC: 5 | RNVC: 2

6 Mar 2013

5120-12-364-6814
Socket Wrench Socket

123646814
02020018-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-174-0864
Montagestutzen

121740864
351271108030: RNCC: 3 | RNVC: 2

6 Jun 1978

5120-12-374-3906
Torque Wrench Adapter

123743906
58221013-TCS: RNCC: 3 | RNVC: 2

13 Feb 2008

5120-12-336-5081
Bearing And Bushing Inserter

123365081
0852 3016: RNCC: 3 | RNVC: 2
8523016: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-130-9327
Socket Wrench

121309327
DIN3112-36: RNCC: 2 | RNVC: 2
510-36: RNCC: 3 | RNVC: 2
1768213: RNCC: 5 | RNVC: 2
36DIN3112: RNCC: 5 | RNVC: 2
1768213: RNCC: 5 | RNVC: 2
05100036: RNCC: 5 | RNVC: 2
3112-36: RNCC: 5 | RNVC: 9
3112-36: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-303-8193
Spanner Wrench

123038193
009-030.110-001W4: RNCC: 3 | RNVC: 2
12790-111000.001: RNCC: 5 | RNVC: 2
009-039.110-001W4: RNCC: 5 | RNVC: 9

6 May 1985

5120-12-361-8348
Hand Hammer

123618348
5293133000: RNCC: 3 | RNVC: 2
5293.13-3000: RNCC: 5 | RNVC: 2

21 Nov 2003

5120-12-337-0863
Eindrueckwerkzeug

123370863
S180ZZ28000-000: RNCC: 3 | RNVC: 2

18 Jan 1995

5120-12-309-2834
Mechanical Puller

123092834
916920-3000: RNCC: 3 | RNVC: 2

9 Jan 1987

5120-12-169-3681
Socket Wrench Screwdriver Attachment

121693681
IN19-9MM: RNCC: 3 | RNVC: 2
615366: RNCC: 5 | RNVC: 2
TVA5120-2-263-037-1.1.36: RNCC: 5 | RNVC: 2

10 May 1977

5120-12-381-7712
Socket Wrench Adapter

123817712
BW-MXT3-HX19-120: RNCC: 3 | RNVC: 2

29 Mar 2010

5120-12-364-6793
Socket Wrench Socket

123646793
03010022-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-198-7245
Torque Wrench Adapter

121987245
5870656004: RNCC: 3 | RNVC: 2
026064: RNCC: 5 | RNVC: 2
5870656004: RNCC: 5 | RNVC: 9

22 Feb 1984

5120-12-390-5448
Socket Wrench Set

123905448
517.0455: RNCC: 3 | RNVC: 2

22 Nov 2012

5120-12-359-6710
Bearing And Bushing Inserter And Remover

123596710
T623P3002160: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-349-0141
Socket Head Screw Key Set

123490141
43-6T: RNCC: 3 | RNVC: 2

14 Sep 1999

5120-12-368-8195
Offset Screwdriver

123688195
73272002-TCS: RNCC: 3 | RNVC: 2

25 Apr 2006

5120-12-355-3942
Torque Wrench Adapter

123553942
5555130: RNCC: 3 | RNVC: 2

9 Nov 2001

5120-12-385-9935
Screwdriver Bit Holder

123859935
05053880001: RNCC: 3 | RNVC: 2
895/5/1: RNCC: 5 | RNVC: 2

28 Jul 2011

5120-12-181-1318
Socket Wrench Handle

121811318
1072: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-090-5459

5120-12-385-7481
Hammer Handle

123857481
869145601: RNCC: 3 | RNVC: 2

6 Jul 2011

5120-12-344-2916
Spitzhack Aufnahme

123442916
81669175000: RNCC: 3 | RNVC: 2

14 Oct 1997

5120-12-313-4279
Zentrier- Ring

123134279
80996170146: RNCC: 3 | RNVC: 2
80.99617.0146: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-092-1412

5120-12-185-5944
Spanner Wrench

121855944
V7060-024-821-33: RNCC: 3 | RNVC: 2

16 Oct 1980

5120-12-335-1944
Hand Rivet Set

123351944
S180ZZ24000-000: RNCC: 3 | RNVC: 2

26 Jul 1994

5120-12-385-7056
Mechanical Puller Set

123857056
24-C: RNCC: 3 | RNVC: 2
882700-24C: RNCC: 5 | RNVC: 2

1 Jul 2011

5120-12-317-1372
Flat Tip Screwdriver

123171372
64701: RNCC: 3 | RNVC: 2
66471: RNCC: 3 | RNVC: 2
8060VDE-0,5X3X75: RNCC: 3 | RNVC: 2
169056: RNCC: 3 | RNVC: 9
01.72.46.77: RNCC: 5 | RNVC: 2
4001002664715: RNCC: 5 | RNVC: 2
6647-3,0X75: RNCC: 5 | RNVC: 2
8060VDE-05X28X75: RNCC: 5 | RNVC: 9

13 Mar 1989

5120-12-308-8139
Pliers

123088139
DIN5257-A180-GERAUHT: RNCC: 2 | RNVC: 2
A180-DIN5257GERAUHT: RNCC: 5 | RNVC: 2

18 Nov 1986

5120-12-186-6335
Flat Tip Screwdriver

121866335
4200053-200: RNCC: 3 | RNVC: 2

21 Jan 1981

5120-12-191-9355
Pedal Adjustment Tool Compressor

121919355
NO PRIMARY REF 12-191-9355: RNCC: 3 | RNVC: 2
442270: RNCC: 5 | RNVC: 9

16 Mar 1982

5120-12-373-4041
Flat Tip Screwdriver

123734041
11105: RNCC: 3 | RNVC: 2
111-8,0X150: RNCC: 5 | RNVC: 2
4001002111059: RNCC: 5 | RNVC: 2

29 Oct 2007

5120-12-333-6620
Flat Tip Screwdriver

123336620
42002: RNCC: 3 | RNVC: 2
52734040: RNCC: 3 | RNVC: 2
952655: RNCC: 3 | RNVC: 2
148-5,5X120: RNCC: 3 | RNVC: 2
E-452323: RNCC: 5 | RNVC: 2

19 Jan 1994

5120-12-127-4668
Drive Pin Punch

121274668
DIN6450-D2: RNCC: 2 | RNVC: 2
3646-115: RNCC: 3 | RNVC: 2
355-2: RNCC: 3 | RNVC: 2
1074937: RNCC: 5 | RNVC: 2
649309: RNCC: 5 | RNVC: 2
D2DIN6450: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-350-3247
Drive Pin Punch

123503247
5600023-990100.007.0: RNCC: 2 | RNVC: 2
5600023-990100.007.0: RNCC: 3 | RNVC: 2

15 Mar 2000

5120-12-376-7368
Mechanical Puller

123767368
8109240: RNCC: 3 | RNVC: 2
4036976103489: RNCC: 5 | RNVC: 2
1.06/4-4: RNCC: 5 | RNVC: 2
1.06/4-4: RNCC: 5 | RNVC: 2
4036976103489: RNCC: 5 | RNVC: 2
8109240: RNCC: 5 | RNVC: 2

3 Nov 2008

5120-12-370-1405
Socket Wrench Socket

123701405
40D-6: RNCC: 3 | RNVC: 2
01030006: RNCC: 5 | RNVC: 2

25 Sep 2006

5120-12-182-5569
Fuehrungsstueck

121825569
VW439: RNCC: 3 | RNVC: 9

11 Feb 1980

5120-12-358-7776
Bearing And Bushing Inserter

123587776
80996170011: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-331-5632
Pipe Vise

123315632
7.0714: RNCC: 3 | RNVC: 2
70714: RNCC: 5 | RNVC: 2

19 May 1993

5120-12-359-9796
W Spannvorrichtung

123599796
203386: RNCC: 3 | RNVC: 2

26 Mar 2003

5120-12-184-2050
Digging Pick

121842050
DIN20109-3,5: RNCC: 2 | RNVC: 2
3,5DIN20109: RNCC: 5 | RNVC: 2
3-5DIN20109: RNCC: 5 | RNVC: 9

3 Jul 1980

5120-12-199-5068
Face Spanner Wrench Socket

121995068
839589320701: RNCC: 3 | RNVC: 2
CH1775/6.1: RNCC: 5 | RNVC: 2
CH1775/6.1: RNCC: 5 | RNVC: 9

4 May 1984

5120-12-364-9570
Swivel Knob Jeweler's Screwdriver

123649570
T4877XESDTX08X60: RNCC: 3 | RNVC: 2

18 Nov 2004

5120-12-145-8051
Zentriervorrichtung

121458051
837589276300: RNCC: 3 | RNVC: 2
8375892763: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-380-4417
Screw Thread Insert Inserter

123804417
620000631: RNCC: 3 | RNVC: 2

30 Oct 2009

5120-12-325-9832
Torque Wrench Adapter

123259832
TL5120-0086-280: RNCC: 2 | RNVC: 2

10 Nov 1998

5120-12-310-8769
Wuergezangenteil

123108769
S4-1300: RNCC: 3 | RNVC: 2
1300: RNCC: 5 | RNVC: 2

3 Jul 1987

5120-12-126-2255
Pliers

121262255
DIN5235-B-KUNSTSTOFFUEBERZUG: RNCC: 2 | RNVC: 2
191-591 130: RNCC: 3 | RNVC: 2
V22199-Z-A127: RNCC: 5 | RNVC: 2
V22199ZA127: RNCC: 5 | RNVC: 2
BDIN5235: RNCC: 5 | RNVC: 2
191-591 130: RNCC: 5 | RNVC: 9
106707: RNCC: 5 | RNVC: 9
2713AB: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-144-5316
Trommelde Hebezange

121445316
0003-3465-170: RNCC: 3 | RNVC: 2
0003-3465-170: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-149-5842
Socket Wrench

121495842
NO PRIMARY REF 12-149-5842: RNCC: 3 | RNVC: 2
26R-AF-C-15/16X1: RNCC: 5 | RNVC: 9
213136: RNCC: 5 | RNVC: 9
1936Z15-16X1: RNCC: 5 | RNVC: 9
105166: RNCC: 5 | RNVC: 9
26R15-16X1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-4988
Schluesseleinsatz

121534988
CH1920-7: RNCC: 3 | RNVC: 2
CH1920-7: RNCC: 5 | RNVC: 9
6-0888-01-1-0106: RNCC: 5 | RNVC: 9
6.0888.01.1.0106: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-149-5300
Lamp Extractor

121495300
NO PRIMARY REF 12-149-5300: RNCC: 3 | RNVC: 2
28-70154-00: RNCC: 5 | RNVC: 9
9200 870154: RNCC: 5 | RNVC: 9
9200870154: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1742
Wrecking Bar

121261742
22001: RNCC: 3 | RNVC: 2
254-1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-367-9416
Socket Wrench

123679416
4005: RNCC: 3 | RNVC: 2
18070030: RNCC: 5 | RNVC: 2

9 Nov 2005

5120-12-374-6049
Drift

123746049
F30140452: RNCC: 3 | RNVC: 2

28 Feb 2008

5120-12-156-1556
Socket Wrench Handle Ratchet Head

121561556
CH1772-42-4NM: RNCC: 3 | RNVC: 2
CH1772-42-4NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-300-9115
Gl Montierwerkzeug

123009115
7213130700: RNCC: 3 | RNVC: 2
7-213-13-0700: RNCC: 5 | RNVC: 2

11 Sep 1984

5120-12-151-6547
Aufweitevorrichtung

121516547
1004W6: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-371-6554
Spanner Wrench

123716554
62910031008: RNCC: 3 | RNVC: 2

3 May 2007

5120-12-310-8886
Mechanical Puller Attachment

123108886
ROLLEX 32313B-J2: RNCC: 3 | RNVC: 2
001589323300: RNCC: 5 | RNVC: 2

6 Jul 1987

5120-12-196-1720
Spanner Wrench

121961720
4900231-322000: RNCC: 2 | RNVC: 2
G004/112500: RNCC: 3 | RNVC: 2
G004/112500: RNCC: 5 | RNVC: 9

8 Jun 1983

5120-12-146-5900
Spanner Wrench

121465900
23182-9700.03: RNCC: 2 | RNVC: 2
23182-9700.03: RNCC: 3 | RNVC: 2
23182-9700-03: RNCC: 5 | RNVC: 9
23182-9700-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-2649
Pliers

121262649
JUG90738920: RNCC: 3 | RNVC: 2
503: RNCC: 5 | RNVC: 2
106309: RNCC: 5 | RNVC: 9
2455B: RNCC: 5 | RNVC: 9
169-451 200: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-310-0550
Mechanical Puller

123100550
72710-1W86.01: RNCC: 3 | RNVC: 2

2 Apr 1987

5120-12-369-0069
Tap And Reamer Wrench

123690069
100-10: RNCC: 3 | RNVC: 2
01.41.64.02: RNCC: 5 | RNVC: 2

11 May 2006

5120-12-341-6448
Plier Clamp

123416448
986402: RNCC: 3 | RNVC: 2
120050: RNCC: 3 | RNVC: 2
01.90.86.74: RNCC: 5 | RNVC: 2
4003773-021193: RNCC: 5 | RNVC: 2

9 Oct 1996

5120-12-311-8340
Socket Head Screw Key

123118340
3184-10: RNCC: 3 | RNVC: 2

21 Oct 1987

5120-12-150-6244
Ratchet Wrench

121506244
2350-12MITEINSATZ27MM: RNCC: 3 | RNVC: 2
2350-12-27: RNCC: 5 | RNVC: 2
000589260300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-121-8022
Pliers

121218022
NO PRIMARY REF 12-121-8022: RNCC: 3 | RNVC: 2
1358: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-0331
Crimping Tool Die

123880331
1187-06101: RNCC: 3 | RNVC: 2
80.99625-0107: RNCC: 5 | RNVC: 2
80996250107: RNCC: 5 | RNVC: 2

17 Feb 2012

5120-12-192-0314
Battery Filler Cap Wrench

121920314
1687950062: RNCC: 3 | RNVC: 2
EFEP341: RNCC: 3 | RNVC: 2
BOSCH-EFEP341: RNCC: 5 | RNVC: 2
BOSCH-EFEP341: RNCC: 5 | RNVC: 2

22 Mar 1982

5120-12-368-7326
Pedal Adjustment Tool Compressor

123687326
312878: RNCC: 3 | RNVC: 2
0856-03-10-00/37: RNCC: 5 | RNVC: 2

11 Apr 2006

5120-12-394-1741
Mounting Punch

123941741
236708: RNCC: 3 | RNVC: 2
94784-810.02: RNCC: 5 | RNVC: 2

8 Nov 2013

5120-12-317-1765
Zentrier- Ring

123171765
1402441/4: RNCC: 3 | RNVC: 9

15 Mar 1989

5120-12-153-7198
Spanner Wrench

121537198
CH2283-28NM: RNCC: 3 | RNVC: 2
561589000500: RNCC: 5 | RNVC: 2
5615890005/00: RNCC: 5 | RNVC: 2
CH2283-28NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-2820
Dorn

121762820
23290-268170.000: RNCC: 2 | RNVC: 2
23290-268170: RNCC: 3 | RNVC: 2
23290-268170.000: RNCC: 3 | RNVC: 2
23290-268170: RNCC: 5 | RNVC: 9

23 Nov 1978

5120-12-703-1175
Carpenters' Pincers

127031175
139-006-09: RNCC: 3 | RNVC: 2

2 Dec 1997

5120-12-164-7524
Socket Wrench Crowfoot Attachment

121647524
NO PRIMARY REF 12-164-7524: RNCC: 3 | RNVC: 2
131503: RNCC: 5 | RNVC: 9
1950M60: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5921
Open End Wrench

121235921
NO PRIMARY REF 12-123-5921: RNCC: 3 | RNVC: 2
610A76: RNCC: 5 | RNVC: 9
610A76: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-1628
Open End Wrench

121531628
282-703-180-030: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-153-2087
Dorn

121532087
CH1989-14NM: RNCC: 3 | RNVC: 2
1201 9465: RNCC: 5 | RNVC: 2
A26-50-120: RNCC: 5 | RNVC: 9
CH1989-14NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-9490
Lamp Extractor

121559490
NM339-02: RNCC: 3 | RNVC: 2
NM339-02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-4847
Open End Wrench

121234847
DIN133-100: RNCC: 2 | RNVC: 2
2300-100: RNCC: 3 | RNVC: 2
133-100: RNCC: 3 | RNVC: 2
452-100: RNCC: 3 | RNVC: 2
175-100: RNCC: 3 | RNVC: 2
100DIN133: RNCC: 5 | RNVC: 2
01750017: RNCC: 5 | RNVC: 2
1102110017: RNCC: 5 | RNVC: 9
50640: RNCC: 5 | RNVC: 9
571A301-100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-3029
Socket Wrench

121263029
92-21X23: RNCC: 3 | RNVC: 2
4040M21X23: RNCC: 3 | RNVC: 2
34/21X23: RNCC: 3 | RNVC: 2
29-21X23: RNCC: 3 | RNVC: 2
4300008: RNCC: 3 | RNVC: 2
092070: RNCC: 5 | RNVC: 2
107834: RNCC: 5 | RNVC: 2
07630: RNCC: 5 | RNVC: 9
1928110019: RNCC: 5 | RNVC: 9
645-21X23: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-333-5642
Op Montierwerkzeug

123335642
61-90-014: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-150-8998
Hand Blind Riveter

121508998
326260: RNCC: 3 | RNVC: 2
TT55A: RNCC: 5 | RNVC: 2
169122101: RNCC: 5 | RNVC: 2
K46241: RNCC: 5 | RNVC: 2
7101-86-36-10: RNCC: 5 | RNVC: 9
7101-86-36.10: RNCC: 5 | RNVC: 9
5120-0060: RNCC: 5 | RNVC: 9
5120-060: RNCC: 5 | RNVC: 9
TL5120-0060: RNCC: 5 | RNVC: 9
5120-43310: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-150-6250
Mechanical Puller Step Plate

121506250
23176-264260-05-0: RNCC: 2 | RNVC: 2
23176-264260.05.0: RNCC: 2 | RNVC: 2
23176-264260.05.0: RNCC: 5 | RNVC: 2
23176-264260-05-0: RNCC: 5 | RNVC: 2
23176-264260-05-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-181-1427
Mechanical Puller

121811427
319589003300: RNCC: 3 | RNVC: 9

29 Oct 1979

5120-12-328-6979
Hand Tube Flaring Punch

123286979
F6141453: RNCC: 3 | RNVC: 2
F603001141453: RNCC: 5 | RNVC: 2

16 Jun 1992

5120-12-357-7126
Screw Thread Insert Inserter

123577126
8375890061: RNCC: 3 | RNVC: 2

15 Jul 2002

5120-12-120-5644
Pliers

121205644
NO PRIMARY REF 12-120-5644: RNCC: 3 | RNVC: 2
51-140: RNCC: 5 | RNVC: 9
A140DIN7210: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-5451
Torque Wrench

121815451
TER12FUA: RNCC: 3 | RNVC: 2
37641: RNCC: 5 | RNVC: 2
7474N: RNCC: 5 | RNVC: 9
5120-01212: RNCC: 6 | RNVC: 9

30 Nov 1979

5120-12-141-2963
Open End Wrench

121412963
NO PRIMARY REF 12-141-2963: RNCC: 3 | RNVC: 2
104962: RNCC: 5 | RNVC: 9
1931NZ5-16X3-8IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-700-3617
Open End Wrench

127003617
51-083009004: RNCC: 2 | RNVC: 2

9 Apr 1992

5120-12-369-7991
Crimping Tool Die

123697991
S46999-M7-S868: RNCC: 3 | RNVC: 2

17 Aug 2006

5120-12-301-3646
Adjustable Wrench

123013646
11129: RNCC: 3 | RNVC: 2
225-18: RNCC: 5 | RNVC: 9
225-18: RNCC: 5 | RNVC: 9

10 Oct 1984

5120-12-388-8026
Bearing And Bushing Inserter

123888026
80996040302: RNCC: 3 | RNVC: 2
80.99604-0302: RNCC: 5 | RNVC: 2

24 Apr 2012

5120-12-383-9740
Torque Wrench Adapter

123839740
732/80-30: RNCC: 3 | RNVC: 2
58228030: RNCC: 5 | RNVC: 2

4 Jan 2011

5120-12-700-6195
Spanner Wrench

127006195
4209755: RNCC: 3 | RNVC: 2
KUPPLUNGSSCHLUESSEL, EINSEITIG: RNCC: 5 | RNVC: 9

29 Sep 1992

5120-12-023-0162

5120-12-357-7361
Piston Ring Expander

123577361
F30378003: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-315-1626
Socket Wrench

123151626
0976129000: RNCC: 3 | RNVC: 2
0976 129 000: RNCC: 5 | RNVC: 2

24 Sep 1988

5120-12-133-1844
Electric Melting Pot

121331844
T100: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-371-9022
Hand Hammer

123719022
5027081000: RNCC: 3 | RNVC: 2

29 May 2007

5120-12-387-4019
Op Montierwerkzeug

123874019
17AH: RNCC: 3 | RNVC: 2

9 Dec 2011

5120-12-357-7346
Bearing And Bushing Inserter

123577346
F30274266: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-347-4998
Mechanical Puller

123474998
4992014-400: RNCC: 3 | RNVC: 2

18 Dec 1998

5120-12-368-1243
Torque Wrench

123681243
6145-1CT: RNCC: 3 | RNVC: 2
4000896025565: RNCC: 5 | RNVC: 2
6145CT: RNCC: 5 | RNVC: 9

12 Dec 2005

5120-12-309-6556
Spanner Wrench

123096556
335927-9011.000: RNCC: 3 | RNVC: 2
335927-9011-000: RNCC: 5 | RNVC: 9
335927-9011.000: RNCC: 5 | RNVC: 9
33 59 27-9011.000: RNCC: 5 | RNVC: 9

13 Feb 1987

5120-12-360-1921
Seal Inserter

123601921
80996040221: RNCC: 3 | RNVC: 2
80.99604-0221: RNCC: 5 | RNVC: 2

15 Apr 2003

5120-12-338-6551
Dreh Haltewerkzeug

123386551
4900059-752170.002.0: RNCC: 3 | RNVC: 2

10 Aug 1995

5120-12-380-0926
Bearing And Bushing Inserter

123800926
80996040130: RNCC: 3 | RNVC: 2
80.99604-0130: RNCC: 5 | RNVC: 2

25 Sep 2009

5120-12-146-0593
Dorn

121460593
23114-7101-10: RNCC: 2 | RNVC: 2
510162: RNCC: 5 | RNVC: 2
510162: RNCC: 5 | RNVC: 9
23114-7101-10: RNCC: 5 | RNVC: 9
510162: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-333-4612
Socket Head Screw Key

123334612
591801-0001.000: RNCC: 3 | RNVC: 2

20 Dec 1993

5120-12-320-5624
Socket Wrench Ratchet Attachment

123205624
754-04: RNCC: 3 | RNVC: 2

26 Jan 1990

5120-12-145-3555
Ratchet Screwdriver

121453555
NO PRIMARY REF 12-145-3555: RNCC: 3 | RNVC: 2
4021-250LG: RNCC: 5 | RNVC: 9
572A602-250LG: RNCC: 5 | RNVC: 9
WELTREC0RD2AN0RMAL: RNCC: 5 | RNVC: 9
WELTRECORD2ANORMAL: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-187-6883
Aligning Punch

121876883
NO PRIMARY REF 12-187-6883: RNCC: 3 | RNVC: 2
KN09.604: RNCC: 5 | RNVC: 9

27 Apr 1981

5120-12-193-6746
Zange Spitze

121936746
E8000/I5: RNCC: 3 | RNVC: 2
570370: RNCC: 5 | RNVC: 2
E8000/J5: RNCC: 5 | RNVC: 2
TSI-5: RNCC: 5 | RNVC: 2
TSJ-5: RNCC: 5 | RNVC: 2

19 Aug 1982

5120-12-135-2476
Electron Tube Pin Straightener

121352476
VS502G44: RNCC: 3 | RNVC: 9
23291: RNCC: 5 | RNVC: 2
557-0376: RNCC: 5 | RNVC: 2
VS0502G044: RNCC: 5 | RNVC: 2
23291: RNCC: 5 | RNVC: 9
557-0376: RNCC: 5 | RNVC: 9
VS0502G044: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-154-5463
Spade

121545463
5120-001HALBLANG: RNCC: 2 | RNVC: 2
138106: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-4310
Socket Head Screw Key Set

123714310
508-180-08: RNCC: 3 | RNVC: 2
00.43.14.46: RNCC: 5 | RNVC: 2

28 Mar 2007

5120-12-364-5661
Socket Wrench Crowfoot Attachment

123645661
02200017-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-126-3117
Pin Vise

121263117
1127: RNCC: 3 | RNVC: 2
310115: RNCC: 3 | RNVC: 2
GW4103-140: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-336-5397
Mechanical Puller Attachment

123365397
5187084-000.02: RNCC: 3 | RNVC: 2

24 Nov 1994

5120-12-157-9818
Montier- Dorn

121579818
1X56103778: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-146-1139
Flat Tip Screwdriver

121461139
AWN481-0-6X4-0NM: RNCC: 3 | RNVC: 2
NM256-11: RNCC: 3 | RNVC: 2
JD5120-12-146-1139: RNCC: 3 | RNVC: 2
AWN481-0-6X4-0NM: RNCC: 3 | RNVC: 2
AWN481-0-6X4-0NM: RNCC: 5 | RNVC: 9
A0-6X4X100DIN5265TLAWN481: RNCC: 5 | RNVC: 9
NM256-11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1622
C Clamp

121261622
M106: RNCC: 3 | RNVC: 2
GSM30-22: RNCC: 5 | RNVC: 9
61-187: RNCC: 5 | RNVC: 9
3047-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-309-6568
Okular Zange

123096568
335927-9034.000: RNCC: 3 | RNVC: 2
6264.10-8: RNCC: 5 | RNVC: 2
33 59 27-9034.000: RNCC: 5 | RNVC: 9
335927-9034-000: RNCC: 5 | RNVC: 9
335927-9034.000: RNCC: 5 | RNVC: 9

13 Feb 1987

5120-12-123-5444
Socket Wrench

121235444
NO PRIMARY REF 12-123-5444: RNCC: 3 | RNVC: 2
24-319: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-4885
Schraenkeisen

121264885
TFS70-05985: RNCC: 3 | RNVC: 2
TFS70-05985: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-315-9046
Socket Wrench

123159046
F30006093: RNCC: 3 | RNVC: 2
CVR-F30006093: RNCC: 5 | RNVC: 2
F30006093: RNCC: 5 | RNVC: 2
CVR-F30006093: RNCC: 5 | RNVC: 2
F30006093: RNCC: 5 | RNVC: 2

7 Dec 1988

5120-12-362-1142
Crimpzange Kopf

123621142
118310101: RNCC: 3 | RNVC: 2
CSV10-0094: RNCC: 5 | RNVC: 2
80996250094: RNCC: 5 | RNVC: 2
80996250045: RNCC: 5 | RNVC: 9

12 Jan 2004

5120-12-155-0188
Lamp Extractor

121550188
54.2201.154.00: RNCC: 3 | RNVC: 2
54-2201-154-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-365-7464
Spanner Wrench

123657464
57090A0000-01: RNCC: 3 | RNVC: 2
M47602: RNCC: 5 | RNVC: 2

31 Jan 2005

5120-12-184-1094
Einsatz

121841094
VG95211-ML-121841094: RNCC: 2 | RNVC: 2
1000042-190200.04: RNCC: 3 | RNVC: 2
1000042-190200-04: RNCC: 5 | RNVC: 2

24 Jun 1980

5120-12-321-5386
Lamp Extractor

123215386
KT E12-009: RNCC: 3 | RNVC: 2

30 May 1990

5120-12-349-4862
Flat Tip Screwdriver Set

123494862
818801-8002.000: RNCC: 3 | RNVC: 2

22 Nov 1999

5120-12-123-5103
Open End Wrench

121235103
NO PRIMARY REF 12-123-5103: RNCC: 3 | RNVC: 2
5M8936-220-99: RNCC: 5 | RNVC: 2
105061: RNCC: 5 | RNVC: 9
1932WZ7-16X1-2: RNCC: 5 | RNVC: 9
00960: RNCC: 5 | RNVC: 9
330A7-16X1-2: RNCC: 5 | RNVC: 9
1932WZ7-16X1-2: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-325-3334
Ratchet Wrench

123253334
NO PRIMARY REF 12-325-3334: RNCC: 3 | RNVC: 2
1322Z9/16: RNCC: 5 | RNVC: 9
174262: RNCC: 5 | RNVC: 9

27 May 1991

5120-12-199-0775
Wrench

121990775
S22: RNCC: 3 | RNVC: 2

23 Mar 1984

5120-12-134-2641
Kolbenbo Auszieher

121342641
032M00400: RNCC: 3 | RNVC: 2
VM53868: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-316-1447
Mechanical Puller Attachment

123161447
1X56136731: RNCC: 3 | RNVC: 2

24 Dec 1988

5120-12-121-8268
Open End Wrench

121218268
0111 0367: RNCC: 3 | RNVC: 2
200-22X27: RNCC: 3 | RNVC: 2
K65004: RNCC: 3 | RNVC: 2
1110367: RNCC: 5 | RNVC: 2
K65004: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-385-7013
Mechanical Puller

123857013
1X53166817: RNCC: 3 | RNVC: 2

1 Jul 2011

5120-12-123-5033

5120-12-024-3340

5120-12-320-0742
Seal Inserter

123200742
3650003: RNCC: 3 | RNVC: 2

5 Dec 1989

5120-12-382-2005
Retaining Ring Pliers

123822005
EH 5500: RNCC: 3 | RNVC: 2
01.57.85.71: RNCC: 5 | RNVC: 2

20 May 2010

5120-12-190-4583
Socket Wrench Set

121904583
2115AF: RNCC: 3 | RNVC: 2

26 Nov 1981

5120-12-333-4792
Bearing And Bushing Inserter

123334792
9108510106: RNCC: 3 | RNVC: 2

22 Dec 1993

5120-12-195-2635
Socket Wrench Socket

121952635
420 6562: RNCC: 3 | RNVC: 2
4206562: RNCC: 3 | RNVC: 2

31 Jan 1983

5120-12-174-2343
Electronic Equipment Alignment Tool

121742343
1-303: RNCC: 3 | RNVC: 9

15 Jun 1978

5120-12-169-9657
Spanner Wrench

121699657
2300002-261200.000: RNCC: 2 | RNVC: 2
2300002-261200.000: RNCC: 3 | RNVC: 2
2300002-261200: RNCC: 5 | RNVC: 9

15 Jun 1977

5120-12-153-2812
Socket Wrench Handle Bar

121532812
NM212-02: RNCC: 3 | RNVC: 2
1201 9458: RNCC: 5 | RNVC: 2
NM212-02: RNCC: 5 | RNVC: 9
A26-50-114: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-183-7091
Socket Wrench Crowfoot Attachment

121837091
3S51603-0000: RNCC: 3 | RNVC: 2

13 May 1980

5120-12-338-4377
Auswechs Klemmteil

123384377
490-221 050: RNCC: 3 | RNVC: 2
490-221 050: RNCC: 5 | RNVC: 9

10 Jul 1995

5120-12-324-9963
Retaining Ring Pliers

123249963
NO PRIMARY REF 12-324-9963: RNCC: 3 | RNVC: 2
5374520001: RNCC: 5 | RNVC: 9
1844A-3: RNCC: 5 | RNVC: 9

22 Apr 1991

5120-12-350-4809
Rotating Members Aligning Tool

123504809
26-21C1359G002P13: RNCC: 3 | RNVC: 2

5 Apr 2000

5120-12-368-8962
Tap Extractor

123688962
33-0B: RNCC: 3 | RNVC: 2
01.98.78.90: RNCC: 5 | RNVC: 2
33-0: RNCC: 5 | RNVC: 9

4 May 2006

5120-12-386-8765
Gelenkhebel- Heber

123868765
17889680EGS00: RNCC: 3 | RNVC: 2
SK1059-180250.000.0: RNCC: 5 | RNVC: 2

11 Oct 2011

5120-12-155-9374
Socket Head Screw Key

121559374
NM290-07: RNCC: 3 | RNVC: 2
NM290-07: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-348-1971
Socket Wrench Screwdriver Attachment

123481971
1054KK-8: RNCC: 3 | RNVC: 2
03310008: RNCC: 5 | RNVC: 2

5 May 1999

5120-12-171-3434
Wrecking Bar

121713434
6895-500: RNCC: 3 | RNVC: 9
6531-500: RNCC: 5 | RNVC: 9
3958A500: RNCC: 5 | RNVC: 9

30 Sep 1977

5120-12-196-1718
Socket Wrench

121961718
4900231-320000: RNCC: 2 | RNVC: 2
G004/113000: RNCC: 3 | RNVC: 2
G004/113000: RNCC: 5 | RNVC: 9

8 Jun 1983

Load More Results