What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 36 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 36 of 62

5120-12-371-3404
Socket Wrench Set

123713404
210S 8M: RNCC: 3 | RNVC: 2
00.38.72.89: RNCC: 5 | RNVC: 2

16 Mar 2007

5120-12-318-2888
Seal Inserter

123182888
116589141500: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-12-151-1916
Craftsman's Tweezers

121511916
5478: RNCC: 3 | RNVC: 2
5478: RNCC: 3 | RNVC: 2
9551-110-S: RNCC: 3 | RNVC: 2
1086374: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-323-7456
Hand Beading Tool

123237456
15319801: RNCC: 3 | RNVC: 2
BN511472: RNCC: 5 | RNVC: 2

13 Dec 1990

5120-12-323-5545
Elektron Auszieher

123235545
07L119: RNCC: 3 | RNVC: 2
MIC06: RNCC: 3 | RNVC: 2

6 Dec 1990

5120-12-324-9518
Spanner Wrench

123249518
52820-W2: RNCC: 3 | RNVC: 2

15 Apr 1991

5120-12-177-7349
Socket Head Screw Key

121777349
10760ACV9-32: RNCC: 3 | RNVC: 2
1340-9/32: RNCC: 3 | RNVC: 2
43550018: RNCC: 5 | RNVC: 2
01340631430: RNCC: 5 | RNVC: 2

14 Feb 1979

5120-12-303-8964
Socket Wrench

123038964
336-9X125: RNCC: 3 | RNVC: 2
45179: RNCC: 3 | RNVC: 2
52167090: RNCC: 5 | RNVC: 2

15 May 1985

5120-12-335-2529
Lamp Cap Extractor

123352529
02-968.0: RNCC: 3 | RNVC: 2
430457601: RNCC: 5 | RNVC: 2

1 Aug 1994

5120-12-184-8604
Hand Screw Starter

121848604
8065N-4C: RNCC: 3 | RNVC: 2
05031175001: RNCC: 3 | RNVC: 2
8065N4C: RNCC: 3 | RNVC: 9
1300166: RNCC: 5 | RNVC: 2
1700-1,2X8X225: RNCC: 5 | RNVC: 2
390-1,2X8X235: RNCC: 5 | RNVC: 9
031175: RNCC: 5 | RNVC: 9
66600-1856: RNCC: 5 | RNVC: 9
01495: RNCC: 5 | RNVC: 9
66600-8/190: RNCC: 5 | RNVC: 9

23 Aug 1980

5120-12-363-9700
Bearing And Bushing Inserter

123639700
T671P5002223: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-385-2901
Hand Hammer

123852901
48.000.034: RNCC: 3 | RNVC: 2

18 May 2011

5120-12-369-8116
Socket Wrench

123698116
4040M13X16: RNCC: 3 | RNVC: 2
34/13X16: RNCC: 3 | RNVC: 2
00.31.96.92: RNCC: 5 | RNVC: 2
6298980: RNCC: 5 | RNVC: 2

17 Aug 2006

5120-12-364-9574
Socket Wrench

123649574
T4840XESD32: RNCC: 3 | RNVC: 2

18 Nov 2004

5120-12-126-3130
Socket Wrench Set

121263130
TL5120-0110: RNCC: 2 | RNVC: 2
55-55A18-10: RNCC: 5 | RNVC: 9
96050102: RNCC: 5 | RNVC: 9
TK5120-476: RNCC: 5 | RNVC: 9
5120-0056: RNCC: 5 | RNVC: 9
5120-056: RNCC: 5 | RNVC: 9
TL5120-0056: RNCC: 5 | RNVC: 9
5120-01046: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-195-5500
Box Wrench

121955500
65-7787-280-10: RNCC: 3 | RNVC: 2

10 Mar 1983

5120-12-126-4908
Hand Tube Flaring Tool

121264908
NO PRIMARY REF 12-126-4908: RNCC: 3 | RNVC: 2
161: RNCC: 5 | RNVC: 9
96630111: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5192
Adjustable Wrench

121235192
41639: RNCC: 3 | RNVC: 2
2790-260: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-170-7478
Spanner Wrench

121707478
38530: RNCC: 3 | RNVC: 2
0736-001-1713-000: RNCC: 3 | RNVC: 2

3 Aug 1977

5120-12-388-0559
Crimping Tool Die

123880559
1185-29102: RNCC: 3 | RNVC: 2
80996250117: RNCC: 5 | RNVC: 2
80.99625-0117: RNCC: 5 | RNVC: 2

22 Feb 2012

5120-12-023-1394

5120-12-369-0189
Rohr- Zange

123690189
111 020 2: RNCC: 3 | RNVC: 2
00.13.23.62: RNCC: 5 | RNVC: 2

15 May 2006

5120-12-369-8673
Socket Wrench Socket

123698673
40DL-5: RNCC: 3 | RNVC: 2
01240005: RNCC: 5 | RNVC: 2

22 Aug 2006

5120-12-313-4490
Socket Wrench Socket

123134490
03.364.26.04.0: RNCC: 3 | RNVC: 2
80.99603.0195: RNCC: 5 | RNVC: 2
80996030195: RNCC: 5 | RNVC: 2

31 Mar 1988

5120-12-373-2454
W Spannvorrichtung

123732454
7.1280: RNCC: 3 | RNVC: 2

12 Oct 2007

5120-12-188-2873
Montagevorrichtung

121882873
A.ZENTRIERVORR.DN250MITTELSCHWER: RNCC: 3 | RNVC: 2

24 Jun 1981

5120-12-091-4766

5120-12-371-5159
Driftpin

123715159
71007551: RNCC: 3 | RNVC: 2

11 Apr 2007

5120-12-123-5609
Socket Wrench Handle Bar

121235609
111012221: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-326-5294
Mechanical Puller

123265294
8524361: RNCC: 3 | RNVC: 2

1 Oct 1991

5120-12-126-5365
Torque Wrench

121265365
DSF: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-186-9553
Flat Tip Screwdriver

121869553
111330: RNCC: 3 | RNVC: 2
188-3X150: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-12-123-4937
Torch And Regulator Wrench

121234937
187.58074: RNCC: 3 | RNVC: 2
1500E7215: RNCC: 5 | RNVC: 2
1500E7215: RNCC: 5 | RNVC: 2
16806: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-350-8472
Machinist's Vise

123508472
10804: RNCC: 3 | RNVC: 2
00.10.03.33: RNCC: 5 | RNVC: 2

29 May 2000

5120-12-326-8311
Screwdriver Bit

123268311
NO PRIMARY REF 12-326-8311: RNCC: 3 | RNVC: 2
2487140004: RNCC: 5 | RNVC: 9
987-1,2X8: RNCC: 5 | RNVC: 9

31 Oct 1991

5120-12-172-8182
Dorn

121728182
VG95211-ML-121728182: RNCC: 2 | RNVC: 2
1X56 126 467: RNCC: 3 | RNVC: 2
1X56126467: RNCC: 5 | RNVC: 9

22 Feb 1978

5120-12-158-9755
Electronic Equipment Alignment Tool

121589755
770E: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-129-8772
Spannvorrichtung

121298772
0681269015: RNCC: 3 | RNVC: 2
EF1062: RNCC: 5 | RNVC: 2
0681269015: RNCC: 5 | RNVC: 9
EF1062: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-8199

5120-12-093-7609

5120-12-091-4769

5120-12-368-1031
Offset Screwdriver

123681031
73282012-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-093-7708

5120-12-135-5970
Box Wrench

121355970
085050: RNCC: 3 | RNVC: 2
4M-13-15: RNCC: 3 | RNVC: 2
1829452: RNCC: 5 | RNVC: 2
21-13X15: RNCC: 5 | RNVC: 9
4-13X15: RNCC: 5 | RNVC: 9
41051315: RNCC: 5 | RNVC: 9
4-13X15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-332-4312
Open End Wrench

123324312
2988-001000.001.0: RNCC: 2 | RNVC: 2
2988-001000.001.0: RNCC: 3 | RNVC: 2

10 Aug 1993

5120-12-131-4341
Einsteck Schluessel

121314341
1005-9832: RNCC: 3 | RNVC: 2
1005-9832-3: RNCC: 5 | RNVC: 2
1005-9832: RNCC: 5 | RNVC: 2
1005-9832.3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-314-0899
Driftpin

123140899
5187022: RNCC: 3 | RNVC: 2

4 Jun 1988

5120-12-139-3156

5120-12-190-8615
Montierhuelse

121908615
NO PRIMARY REF 12-190-8615: RNCC: 3 | RNVC: 2
412020: RNCC: 5 | RNVC: 9

17 Dec 1981

5120-12-368-9925
Auszieher

123689925
VR-T10-0001-001: RNCC: 3 | RNVC: 2

11 May 2006

5120-12-385-7565
Socket Wrench Screwdriver Attachment

123857565
59-22: RNCC: 3 | RNVC: 2
05050022: RNCC: 5 | RNVC: 2
SW05050022: RNCC: 5 | RNVC: 2

6 Jul 2011

5120-12-168-7651
Stiftauszi Einsatz

121687651
4900072-009000: RNCC: 2 | RNVC: 2
100332-10000W2: RNCC: 3 | RNVC: 2
4900072-009000: RNCC: 5 | RNVC: 2
100332-10000W2: RNCC: 5 | RNVC: 9
4900072-009000: RNCC: 5 | RNVC: 9

6 Apr 1977

5120-12-195-9042
Montierwerk Huelse

121959042
HL6: RNCC: 3 | RNVC: 2
C5791513CD: RNCC: 5 | RNVC: 2
C 5791 513 CD: RNCC: 5 | RNVC: 2
C 5791 513 CD: RNCC: 5 | RNVC: 2
C5791513CD: RNCC: 5 | RNVC: 2

3 May 1983

5120-12-199-1982
Hand Tube Bender Set

121991982
2.4112: RNCC: 3 | RNVC: 2

3 Apr 1984

5120-12-305-6408
Electronic Equipment Alignment Tool

123056408
1-974: RNCC: 3 | RNVC: 9

28 Nov 1985

5120-12-300-5550
Drive Pin Punch

123005550
AZ0468-7: RNCC: 3 | RNVC: 2
F48900: RNCC: 5 | RNVC: 9

14 Aug 1984

5120-12-127-8507
Mechanical Puller

121278507
30355710100018: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-325-0295
Socket Head Screw Key

123250295
31222000251: RNCC: 3 | RNVC: 2

24 Apr 1991

5120-12-322-6525
Montierhuelse

123226525
1X56136913: RNCC: 3 | RNVC: 2

10 Sep 1990

5120-12-325-6642
Socket Wrench

123256642
944500621: RNCC: 3 | RNVC: 2
944500700: RNCC: 5 | RNVC: 2

27 Jun 1991

5120-12-173-5107
Spanner Wrench

121735107
532008U15W1: RNCC: 3 | RNVC: 2
532008U15W1: RNCC: 5 | RNVC: 2
532008U15W1: RNCC: 5 | RNVC: 9
532008U15W1: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-12-315-9677
Vise Jaw Caps

123159677
4987069: RNCC: 3 | RNVC: 2

9 Dec 1988

5120-12-123-5432
Socket Wrench

121235432
DIN896-B30X36: RNCC: 2 | RNVC: 2
26R30X36: RNCC: 3 | RNVC: 2
621315: RNCC: 5 | RNVC: 2
91720927: RNCC: 5 | RNVC: 2
26R30X36: RNCC: 5 | RNVC: 9
26RC30X36: RNCC: 5 | RNVC: 9
B30X36DIN896: RNCC: 5 | RNVC: 9
26R30X36: RNCC: 5 | RNVC: 9
DIN896B30X36: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-5369
Abziehvorrichtung

121265369
K65034: RNCC: 3 | RNVC: 2
16613-1: RNCC: 3 | RNVC: 2
166131: RNCC: 3 | RNVC: 2
K65034: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-357-7464
Vise Jaw Caps

123577464
152/135: RNCC: 3 | RNVC: 2

18 Jul 2002

5120-12-171-2819
Mutter

121712819
VG95211-ML-121712819: RNCC: 2 | RNVC: 2
105-31711W1.02: RNCC: 3 | RNVC: 2
105-31711W1-02: RNCC: 5 | RNVC: 2

26 Sep 1977

5120-12-123-5835
Socket Wrench Socket

121235835
065758: RNCC: 3 | RNVC: 2
8900DZ2 1-8: RNCC: 3 | RNVC: 2
TVA5120-2-263-027: RNCC: 5 | RNVC: 1
TVA5120-2-263-027/1.1.57: RNCC: 5 | RNVC: 2
65-6-2 1-8: RNCC: 5 | RNVC: 2
110621: RNCC: 5 | RNVC: 2
05430074: RNCC: 5 | RNVC: 2
05410074: RNCC: 5 | RNVC: 9
55A2 1-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-6250
Montierhuelse

123126250
KDEP 1046: RNCC: 3 | RNVC: 2

22 Jan 1988

5120-12-359-6698
Bearing And Bushing Inserter And Remover

123596698
T622P3007051: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-305-8266
Furnace And Flue Wire Brush

123058266
442/1.5: RNCC: 3 | RNVC: 2
2510-9131-00: RNCC: 5 | RNVC: 2

18 Dec 1985

5120-12-333-4791
Ausdrueckwerkzeug

123334791
9108510107: RNCC: 3 | RNVC: 2

22 Dec 1993

5120-12-334-0330
Socket Wrench

123340330
14 34 191: RNCC: 3 | RNVC: 2

11 Mar 1994

5120-12-140-3881

5120-12-094-1228

5120-12-319-0566
Pliers

123190566
C3904-A-139-A2: RNCC: 3 | RNVC: 9
857-821-034: RNCC: 3 | RNVC: 9

1 Sep 1989

5120-12-301-7415
Lager- Und B Griff

123017415
619-45.10.200-05: RNCC: 3 | RNVC: 2
619-45.10.200-05D: RNCC: 5 | RNVC: 2
4153862: RNCC: 5 | RNVC: 2
619-45.10.200-05: RNCC: 5 | RNVC: 2
619-45.10.200-05D: RNCC: 5 | RNVC: 2
4153862: RNCC: 5 | RNVC: 2
619-45.10.200.05: RNCC: 5 | RNVC: 9

7 Nov 1984

5120-12-135-8603
Mechanical Puller

121358603
1.38-3: RNCC: 3 | RNVC: 2
18-3: RNCC: 3 | RNVC: 2
00309083: RNCC: 5 | RNVC: 2
BALDUR 1.38-3: RNCC: 5 | RNVC: 2
309083: RNCC: 5 | RNVC: 2
55212-3: RNCC: 5 | RNVC: 9
55212030: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-9540
Hole Sheet Metal Holder

121749540
236-2072K-40: RNCC: 3 | RNVC: 2
2072K40: RNCC: 5 | RNVC: 2
236-2072K-40: RNCC: 5 | RNVC: 2
236-2072K-40 0 4,0 MM: RNCC: 5 | RNVC: 9

9 Aug 1978

5120-12-328-9855
Communications Equipment Spring Adjuster

123289855
1878556193: RNCC: 3 | RNVC: 2
18785 56193: RNCC: 5 | RNVC: 9

7 Jul 1992

5120-12-161-5486
Hand Tube Bender

121615486
10-2829R: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-322-8155
Auf Ersatzteilsatz

123228155
114 07 000: RNCC: 3 | RNVC: 2

25 Sep 1990

5120-12-326-0072
Mechanical Puller Step Plate

123260072
2500194-992440.001.0: RNCC: 2 | RNVC: 2
2500194-992440.001.0: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-375-6753
Mechanical Puller Attachment

123756753
40-3-1: RNCC: 3 | RNVC: 2

24 Jun 2008

5120-12-150-3942
N Fuehrungseinsatz

121503942
1X46968225: RNCC: 3 | RNVC: 2
V96822-5: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-394-5417
Adjuster And Mounti

123945417
2500261-993210.000.0: RNCC: 2 | RNVC: 2
2500261-993210.000.0: RNCC: 3 | RNVC: 2

11 Dec 2013

5120-12-323-1477
Oelfilt Schluessel

123231477
LS9: RNCC: 3 | RNVC: 2

26 Oct 1990

5120-12-362-6060
Spanner Wrench

123626060
4185828: RNCC: 3 | RNVC: 2
6503.201.10.14.000: RNCC: 5 | RNVC: 2

11 Mar 2004

5120-12-369-1039
Montierhuelse

123691039
0986611991: RNCC: 3 | RNVC: 2

22 May 2006

5120-12-364-4755
Grommet Inserting Punch And Die

123644755
1614222: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-173-4339
Spanner Wrench

121734339
532008G1W1: RNCC: 3 | RNVC: 2
532008G1W1: RNCC: 5 | RNVC: 2
532008G1W1: RNCC: 5 | RNVC: 9
532008G1W1: RNCC: 5 | RNVC: 9

14 Apr 1978

5120-12-305-5831
Seal Inserter

123055831
312589151500: RNCC: 3 | RNVC: 2

25 Nov 1985

5120-12-192-7717
Face Spanner Wrench Socket

121927717
460589000700: RNCC: 3 | RNVC: 2

24 May 1982

5120-12-131-5592
Schluessel

121315592
RM6038: RNCC: 3 | RNVC: 2
RM6038: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-377-0862
Seal Inserter

123770862
1519835: RNCC: 3 | RNVC: 2
15015112: RNCC: 5 | RNVC: 2

10 Dec 2008

5120-12-181-6992
Electrical Connector Inserter

121816992
54172499: RNCC: 3 | RNVC: 2
54700599: RNCC: 3 | RNVC: 2
DIP-IC4054172499: RNCC: 3 | RNVC: 2
100-36-40PIN: RNCC: 5 | RNVC: 9

10 Dec 1979

5120-12-192-9435
Gegenhalter

121929435
4900269-000000-00: RNCC: 2 | RNVC: 2
4900269: RNCC: 5 | RNVC: 2

7 Jun 1982

5120-12-377-7869
Dapping Punch

123777869
F30378622: RNCC: 3 | RNVC: 2

11 Feb 2009

5120-12-389-3339
Torque Screwdriver

123893339
05074734001: RNCC: 3 | RNVC: 2
7446ESD: RNCC: 5 | RNVC: 2

21 Jun 2012

5120-12-094-1217

5120-12-301-2247
Flat Tip Screwdriver

123012247
762-2,5X60: RNCC: 3 | RNVC: 2
762-60: RNCC: 5 | RNVC: 2

28 Sep 1984

5120-12-196-6394
Spark Testing Screwdriver

121966394
632-3: RNCC: 3 | RNVC: 2
6320001: RNCC: 5 | RNVC: 2
432-N: RNCC: 5 | RNVC: 9
432-N: RNCC: 5 | RNVC: 9
432: RNCC: 5 | RNVC: 9

26 Jul 1983

5120-12-378-6868
Ratchet Wrench Set

123786868
071425650: RNCC: 3 | RNVC: 2
A0714 256 50: RNCC: 5 | RNVC: 2
391412571300: RNCC: 6 | RNVC: 9

4 May 2009

5120-12-310-2142
Spanner Wrench

123102142
1300549: RNCC: 3 | RNVC: 2

22 Apr 1987

5120-12-392-6902
Driftpin

123926902
CTP40512G001: RNCC: 3 | RNVC: 2

28 Jun 2013

5120-12-092-2893

5120-12-171-9948
Socket Wrench Socket

121719948
6300M3-5: RNCC: 3 | RNVC: 2
108758: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-345-4830
Pliers

123454830
65105145: RNCC: 3 | RNVC: 2
65 10 5 145: RNCC: 5 | RNVC: 2

24 Mar 1998

5120-12-377-8896
Marlinespike

123778896
970000: RNCC: 3 | RNVC: 2

19 Feb 2009

5120-12-127-4218
Socket Wrench

121274218
0276073000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-163-6602
Eintreibwerkzeug

121636602
26-21C1053P010: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-387-7223
Socket Wrench Set

123877223
122: RNCC: 3 | RNVC: 2
4024184122002: RNCC: 5 | RNVC: 2

26 Jan 2012

5120-12-393-0300
Hand Hydraulic Jack

123930300
RH1029A1A0A01: RNCC: 3 | RNVC: 2

1 Aug 2013

5120-12-315-7635
Torque Wrench Adapter

123157635
510033: RNCC: 2 | RNVC: 9

25 Nov 1988

5120-12-342-6099
Crimping Tool Die

123426099
VG95236T11AA006: RNCC: 2 | RNVC: 2
MRP0842: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-367-8394
Socket Wrench

123678394
80996030259: RNCC: 3 | RNVC: 2
80.99603.0259: RNCC: 5 | RNVC: 2

21 Oct 2005

5120-12-141-3015
Slip Joint Pliers

121413015
DIN5231-E240GERAUHT: RNCC: 2 | RNVC: 2
E240DIN5231: RNCC: 5 | RNVC: 2
E240DIN5231GERAUHT: RNCC: 5 | RNVC: 2
106551: RNCC: 5 | RNVC: 9
2615N: RNCC: 5 | RNVC: 9
573E211: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-131-4962
Socket Wrench

121314962
NO PRIMARY REF 12-131-4962: RNCC: 3 | RNVC: 2
129808: RNCC: 5 | RNVC: 9
1945UM10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-367-1169
Ge Montierwerkzeug

123671169
121523: RNCC: 3 | RNVC: 2
WBJ-40: RNCC: 5 | RNVC: 2
0015383430: RNCC: 5 | RNVC: 2

11 Jul 2005

5120-12-172-9038
Socket Head Screw Key Set

121729038
42-09: RNCC: 3 | RNVC: 2
1999M/9T: RNCC: 3 | RNVC: 2
42-0900: RNCC: 5 | RNVC: 9

2 Mar 1978

5120-12-174-1765
Slip Joint Pliers

121741765
DIN5231-E190GERAUHT: RNCC: 2 | RNVC: 2
E190DIN5231GERAUHT: RNCC: 5 | RNVC: 2
106547: RNCC: 5 | RNVC: 9
2615M: RNCC: 5 | RNVC: 9

9 Jun 1978

5120-12-385-8388
Lifting Pneumatic Bag

123858388
3110000900: RNCC: 3 | RNVC: 2

12 Jul 2011

5120-12-163-5258
Ausziehvorrichtung

121635258
60396300: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-335-9630
Bearing And Bushing Inserter

123359630
0851 6804: RNCC: 3 | RNVC: 2
8516804: RNCC: 5 | RNVC: 2

6 Oct 1994

5120-12-389-5064
Torque Wrench Adapter

123895064
R819952: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-332-8074
Op Montierwerkzeug

123328074
532113-8115.907: RNCC: 3 | RNVC: 2
532113-8115.907: RNCC: 5 | RNVC: 9

22 Sep 1993

5120-12-133-0449

5120-12-195-0842
Mechanical Puller

121950842
0850 7652: RNCC: 3 | RNVC: 2
8507652: RNCC: 5 | RNVC: 2

11 Jan 1983

5120-12-161-4300
Spanner Wrench

121614300
1874956016: RNCC: 3 | RNVC: 2
18749 56016: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-345-7286
An Montierwerkzeug

123457286
U100-3771-031: RNCC: 3 | RNVC: 2

21 Apr 1998

5120-12-188-9067
Hinged Posthole Digger

121889067
6407-2: RNCC: 3 | RNVC: 9
JUMBO GROESZE 2: RNCC: 5 | RNVC: 9

6 Aug 1981

5120-12-351-9563
Socket Head Screw Key

123519563
ISO2936-2,5: RNCC: 2 | RNVC: 2

20 Sep 2000

5120-12-140-2284

5120-12-356-0322
Montierhuelse

123560322
7017: RNCC: 3 | RNVC: 2

15 Jan 2002

5120-12-023-1469

5120-12-130-3388

5120-12-309-0172
Bearing And Bushing Inserter

123090172
1X56097738: RNCC: 3 | RNVC: 2
8209825: RNCC: 5 | RNVC: 9

8 Dec 1986

5120-12-320-1054
Lager- Und Einsatz

123201054
99366645: RNCC: 3 | RNVC: 2

7 Dec 1989

5120-12-324-9933
Flat Tip Screwdriver

123249933
07460: RNCC: 3 | RNVC: 9

18 Apr 1991

5120-12-342-6108
Crimping Tool Die

123426108
VG95236T11AA109: RNCC: 2 | RNVC: 2
MRP0851: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-373-4384
Lifting Pneumatic Bag

123734384
1314009500: RNCC: 3 | RNVC: 2

5 Nov 2007

5120-12-044-4878

5120-12-150-7865
Stanz- Stempelsatz

121507865
TL5120-0059-15: RNCC: 2 | RNVC: 2
5120-0059-18: RNCC: 5 | RNVC: 9
5120-059-18: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-2823
Ausziehvorrichtung

121762823
23290-268040.000: RNCC: 2 | RNVC: 2
V4940101300: RNCC: 3 | RNVC: 2
23290-268040.000: RNCC: 3 | RNVC: 2
23290-268040: RNCC: 5 | RNVC: 9

23 Nov 1978

5120-12-366-9398
Mechanical Puller

123669398
7039R-1000.000.0: RNCC: 3 | RNVC: 2

22 Jun 2005

5120-12-359-6717
Mechanical Puller Adapter

123596717
T631P3001110: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-094-0364

5120-12-140-9701
Mechanical Puller

121409701
0278010000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-010-9614

5120-12-393-9243
Driftpin

123939243
CTP40708G001: RNCC: 3 | RNVC: 2

22 Oct 2013

5120-12-041-2712

5120-12-347-9756

5120-12-126-1852
Tool Handle Wedge

121261852
KRALLE8: RNCC: 3 | RNVC: 2
KRALLE8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-382-0447
Hand Earth Boring Auger

123820447
GTZ3304000R0001: RNCC: 3 | RNVC: 2

3 May 2010

5120-12-305-7207

5120-12-140-6136
Bruecke Aus Und Ein

121406136
30355710100318: RNCC: 3 | RNVC: 2
30355710100318: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-7249
Montierwer Einsatz

123717249
405589005000: RNCC: 3 | RNVC: 2

9 May 2007

5120-12-332-0174
Socket Wrench Handle Bar

123320174
070500: RNCC: 3 | RNVC: 9

15 Jul 1993

5120-12-365-7605
Socket Head Screw Key

123657605
43260003-TCS: RNCC: 3 | RNVC: 2

1 Feb 2005

5120-12-153-8492
Handling Tool Arm

121538492
CH1773-8: RNCC: 3 | RNVC: 2
5605890361/00: RNCC: 5 | RNVC: 2
560589036100: RNCC: 5 | RNVC: 2
CH1773-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-7579
K Aufdrueck- Huelse

121467579
02071: RNCC: 3 | RNVC: 2
25704-360470.02.0: RNCC: 3 | RNVC: 2
25704-360470-02-0: RNCC: 5 | RNVC: 2
02071: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-195-8845
Socket Wrench Socket

121958845
A6800DZ-5/16: RNCC: 3 | RNVC: 2
40ADL-5/16: RNCC: 3 | RNVC: 2
175854: RNCC: 5 | RNVC: 2
6800DZ5/16: RNCC: 5 | RNVC: 9

27 Apr 1983

5120-12-337-2063
Slugging Type Box Wrench Socket

123372063
647200-60: RNCC: 3 | RNVC: 2
64720-60: RNCC: 5 | RNVC: 2
001.805: RNCC: 5 | RNVC: 9
001.805: RNCC: 5 | RNVC: 9

1 Feb 1995

5120-12-311-1049
Mechanical Puller Attachment

123111049
503R/2L2: RNCC: 3 | RNVC: 2
620589013400: RNCC: 5 | RNVC: 2

27 Jul 1987

5120-12-139-3087
Durchdrehvorrichtun

121393087
8205890069: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-164-3434
Halter

121643434
F6144896: RNCC: 3 | RNVC: 2
F613101144896: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-357-7538
Ru Montierwerkzeug

123577538
RD99-00-012100: RNCC: 3 | RNVC: 2

19 Jul 2002

5120-12-343-5233
Montierdorn

123435233
V1409-T601: RNCC: 3 | RNVC: 2
V1409-T601: RNCC: 5 | RNVC: 2

1 Jul 1997

5120-12-127-2743
Mechanical Puller

121272743
83.09143-0066: RNCC: 3 | RNVC: 2
83091436029: RNCC: 3 | RNVC: 2
WL14B1: RNCC: 5 | RNVC: 2
3907-06000-001: RNCC: 5 | RNVC: 2
83091430066: RNCC: 5 | RNVC: 9
WL14A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-8370
Box Wrench

121748370
NM286-26: RNCC: 3 | RNVC: 2
NM286-26: RNCC: 5 | RNVC: 9

7 Aug 1978

5120-12-175-8181
Spanner Wrench

121758181
264-625: RNCC: 3 | RNVC: 2

8 Dec 2003

5120-12-197-9880
Blindni Mundstueck

121979880
349606: RNCC: 3 | RNVC: 2

8 Dec 1983

5120-12-363-9043
Bearing And Bushing Inserter And Remover

123639043
T670P5001255: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-197-7721
Pliers

121977721
35-930F018: RNCC: 3 | RNVC: 2

22 Nov 1983

5120-12-193-4150
Mechanical Puller

121934150
102 589 00 33 00: RNCC: 3 | RNVC: 2
102589003300: RNCC: 3 | RNVC: 2

20 Jul 1982

5120-12-323-7908
Socket Wrench Adapter

123237908
2305: RNCC: 3 | RNVC: 2

19 Dec 1990

5120-12-330-7158
Socket Wrench

123307158
0851 6224.003: RNCC: 3 | RNVC: 2
8516224.003: RNCC: 5 | RNVC: 2

29 Jan 1993

5120-12-381-9846
Hose Strap Band Clamping Tool

123819846
01-002-101-0020-00-0: RNCC: 3 | RNVC: 2

23 Apr 2010

5120-12-193-6378
Lamp Cap Extractor

121936378
22-32-1Y-1: RNCC: 2 | RNVC: 2
22-320-1Y-005: RNCC: 3 | RNVC: 2
MAGERD 6897: RNCC: 5 | RNVC: 9
MAGERED6897: RNCC: 5 | RNVC: 9
22-321Y-1: RNCC: 5 | RNVC: 9

13 Aug 1982

5120-12-127-0850
Socket Wrench

121270850
NO PRIMARY REF 12-127-0850: RNCC: 3 | RNVC: 2
105224: RNCC: 5 | RNVC: 9
1937Z1-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-196-6254
Plier Wrench

121966254
137/12: RNCC: 3 | RNVC: 2
757-12: RNCC: 3 | RNVC: 2
52050: RNCC: 5 | RNVC: 2
166-12: RNCC: 5 | RNVC: 9
166-12-N: RNCC: 5 | RNVC: 9
166-12-N: RNCC: 5 | RNVC: 9
5370980010: RNCC: 5 | RNVC: 9

25 Jul 1983

5120-12-348-6089
Flat Tip Screwdriver

123486089
NO PRIMARY REF 12-348-6089: RNCC: 3 | RNVC: 2
66020-5,5: RNCC: 5 | RNVC: 9

26 Jul 1999

5120-12-332-6773
Socket Wrench Screwdriver Attachment

123326773
1X56137055: RNCC: 3 | RNVC: 2

3 Sep 1993

5120-12-391-4031
Socket Wrench

123914031
SSG24G: RNCC: 3 | RNVC: 2

11 Mar 2013

5120-12-126-5544
Flat Tip Screwdriver

121265544
64P: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-5420
Lager Abziehbuegel

121265420
4015890033: RNCC: 3 | RNVC: 2
4015890033: RNCC: 3 | RNVC: 9
401589003300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-186-7292
Mechanical Puller

121867292
99366687: RNCC: 3 | RNVC: 2
430060: RNCC: 5 | RNVC: 9
430060: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-304-7514
Socket Head Screw Key

123047514
2300107-310800: RNCC: 2 | RNVC: 2
2300107-310800: RNCC: 3 | RNVC: 2
2300107-310800: RNCC: 5 | RNVC: 9
2300107-310800: RNCC: 5 | RNVC: 9

19 Aug 1985

5120-12-182-9277

5120-12-330-5968
Seal Inserter

123305968
5120-0007-000000: RNCC: 3 | RNVC: 2

14 Jan 1993

5120-12-177-6266
Haltevorrichtung

121776266
UFG103-22: RNCC: 3 | RNVC: 2
UFG103-22: RNCC: 3 | RNVC: 9

9 Feb 1979

5120-12-149-5853
Socket Wrench

121495853
NO PRIMARY REF 12-149-5853: RNCC: 3 | RNVC: 2
105149: RNCC: 5 | RNVC: 9
1936M28X29: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-2149
Cant Hook

121472149
NO PRIMARY REF 12-147-2149: RNCC: 3 | RNVC: 2
2376-9210-00: RNCC: 5 | RNVC: 9
1652: RNCC: 5 | RNVC: 9
5216: RNCC: 5 | RNVC: 9
2376-9210-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-163-6598
Einbauwerkzeug

121636598
26-21C1048P010: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-388-0596
Crimping Tool Die

123880596
1183-22101: RNCC: 3 | RNVC: 2
80.99625-0096: RNCC: 5 | RNVC: 2
80996250096: RNCC: 5 | RNVC: 2

22 Feb 2012

5120-12-133-3874
Combination Box And Open End Wrench

121333874
205A-11/32: RNCC: 3 | RNVC: 2
1952Z11-32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-132-2719
Jewelers' Pliers

121322719
TL5180-0086-56: RNCC: 2 | RNVC: 2
5180-0086-56: RNCC: 5 | RNVC: 9
2815K: RNCC: 5 | RNVC: 9
106817: RNCC: 5 | RNVC: 9
106874: RNCC: 5 | RNVC: 9
2787H: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-9653
Combination Box And Open End Wrench

121819653
600N-11: RNCC: 3 | RNVC: 2
600-11: RNCC: 5 | RNVC: 9
1506110007: RNCC: 5 | RNVC: 9

28 Dec 1979

5120-12-133-3975
Screwdriver Bit

121333975
55Z1-16: RNCC: 3 | RNVC: 2
114450: RNCC: 5 | RNVC: 2
6990Z1-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-173-1711
Spanner Wrench

121731711
V7001-004-928-11: RNCC: 3 | RNVC: 2
V7001-004-928-11: RNCC: 5 | RNVC: 2

22 Mar 1978

5120-12-334-9342
Flat Tip Screwdriver

123349342
537239-8578.000: RNCC: 3 | RNVC: 2
537239-8578.000: RNCC: 5 | RNVC: 9

4 Jul 1994

5120-12-166-2582

5120-12-306-8861
Spanner Wrench

123068861
99355084: RNCC: 3 | RNVC: 2
410390: RNCC: 5 | RNVC: 2
410390: RNCC: 5 | RNVC: 9

14 Apr 1986

5120-12-386-2937
Pliers

123862937
50.000.102: RNCC: 3 | RNVC: 2

22 Aug 2011

5120-12-378-8000
Electronic Component Inserter And Remover

123788000
6551330: RNCC: 3 | RNVC: 2

13 May 2009

5120-12-319-4360
Mechanical Puller Attachment

123194360
99346223: RNCC: 3 | RNVC: 2

2 Oct 1989

5120-12-171-9957
Screwdriver Bit

121719957
45M3: RNCC: 3 | RNVC: 2
114049: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-387-2618
Wrench Extension Handle

123872618
200.073: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-12-324-5211
Magnetic Retrieving Tool

123245211
102589034000: RNCC: 3 | RNVC: 2

26 Feb 1991

5120-12-342-2431
Mechanical Puller

123422431
80996010053: RNCC: 3 | RNVC: 2
80.99601-0053: RNCC: 5 | RNVC: 2

9 Jan 1997

5120-12-389-2395
Flat Tip And Cross Tip Screwdriver Set

123892395
0000536001000: RNCC: 3 | RNVC: 2
MS-36: RNCC: 5 | RNVC: 2

12 Jun 2012

5120-12-170-6885
Flat Tip Screwdriver

121706885
8060VDE-1X6X100: RNCC: 3 | RNVC: 2
169161: RNCC: 5 | RNVC: 2
17242-100X6: RNCC: 5 | RNVC: 9
8060VDE/6: RNCC: 5 | RNVC: 9
8060-1-6-100: RNCC: 5 | RNVC: 9
155-5: RNCC: 5 | RNVC: 9
131721: RNCC: 5 | RNVC: 9

28 Jul 1977

5120-12-319-7029
Spatula

123197029
DIN7216-A120: RNCC: 2 | RNVC: 2

26 Oct 1989

5120-12-362-6036
Piston Ring Compressor

123626036
12.7382-95-00-31.20-00: RNCC: 3 | RNVC: 2

11 Mar 2004

5120-12-338-0543
Gl Montierwerkzeug

123380543
7513130403: RNCC: 3 | RNVC: 2

16 May 1995

5120-12-178-3276
Open End Wrench

121783276
350-BSW1/8X3/16: RNCC: 3 | RNVC: 2
TVA5120-2-263-028: RNCC: 5 | RNVC: 1
TVA5120-2-263-028-1.1.30: RNCC: 5 | RNVC: 2
00350690382: RNCC: 5 | RNVC: 2
10E1/8X3/16: RNCC: 5 | RNVC: 9
450WV1-8X3-16: RNCC: 5 | RNVC: 9
03560: RNCC: 5 | RNVC: 9
450W0046: RNCC: 5 | RNVC: 9

12 Apr 1979

5120-12-357-6098
Schluesseleinsatz

123576098
J0433044D311-000A0: RNCC: 3 | RNVC: 2
5120-00222: RNCC: 6 | RNVC: 9

8 Jul 2002

5120-12-394-1918
Ratchet Wrench

123941918
614820-17: RNCC: 3 | RNVC: 2

11 Nov 2013

5120-12-378-2130
Torque Wrench

123782130
713R-40: RNCC: 3 | RNVC: 2
4018754156528: RNCC: 5 | RNVC: 2
96501640: RNCC: 5 | RNVC: 2

19 Mar 2009

5120-12-185-4842
Socket Wrench

121854842
307-0019-00-00: RNCC: 3 | RNVC: 2

11 Oct 1980

5120-12-358-7774
Bearing And Bushing Inserter

123587774
80996060432: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-360-6839
Socket Wrench

123606839
DIN904-13: RNCC: 2 | RNVC: 2

30 Jun 2003

5120-12-126-2924
Pin Remover

121262924
2632: RNCC: 3 | RNVC: 2
106570: RNCC: 5 | RNVC: 2
TL5180-0037-28: RNCC: 5 | RNVC: 9
5180-0037-28: RNCC: 5 | RNVC: 9
5180-037-28: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-1903
Socket Wrench

121771903
T103S: RNCC: 3 | RNVC: 2
00470907: RNCC: 5 | RNVC: 2

19 Jan 1979

5120-12-170-2621

5120-12-149-6903

5120-12-390-0236
Mechanical Puller Forcing Screw

123900236
KV1052: RNCC: 3 | RNVC: 2

25 Sep 2012

5120-12-162-2266
Socket Wrench

121622266
2876011000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-368-0382
Socket Head Screw Key

123680382
54734: RNCC: 3 | RNVC: 2

23 Nov 2005

5120-12-331-9298
Driftpin

123319298
11460101: RNCC: 3 | RNVC: 2
GZ114601: RNCC: 5 | RNVC: 2

7 Jul 1993

5120-12-152-7216
Hebel

121527216
PV634: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-321-7594
Mechanical Puller

123217594
844603848: RNCC: 3 | RNVC: 2

22 Jun 1990

5120-12-198-7592
Brake Repair Pliers

121987592
480-215: RNCC: 3 | RNVC: 2
796: RNCC: 3 | RNVC: 2
5700001: RNCC: 3 | RNVC: 2
5753720002: RNCC: 5 | RNVC: 2
2680: RNCC: 5 | RNVC: 9

23 Feb 1984

5120-12-177-2192
Box Wrench

121772192
DIN3522-30: RNCC: 2 | RNVC: 2
30DIN3522: RNCC: 5 | RNVC: 2
046-11-9775347: RNCC: 5 | RNVC: 2

19 Jan 1979

5120-12-315-8663
Lamp Extractor

123158663
42-921-003: RNCC: 3 | RNVC: 2

3 Dec 1988

5120-12-123-5579
Schluessele Halter

121235579
NO PRIMARY REF 12-123-5579: RNCC: 3 | RNVC: 2
107890: RNCC: 5 | RNVC: 9
4115S: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-360-3809
Valve Tappet Adjusting Tool

123603809
5505890521/00: RNCC: 3 | RNVC: 2
550589052100: RNCC: 5 | RNVC: 9

15 May 2003

5120-12-363-9042
Bearing And Bushing Inserter

123639042
T670P5001254: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-314-2766
Mechanical Puller

123142766
0853 0170: RNCC: 3 | RNVC: 2
8530170: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-121-4436
Socket Wrench Socket

121214436
7800DM36: RNCC: 3 | RNVC: 2
109740: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-307-4953
Mechanical Puller

123074953
1X56122324: RNCC: 3 | RNVC: 2
1X56122324: RNCC: 5 | RNVC: 2

24 Jun 1986

5120-12-333-5872
Socket Wrench

123335872
844602809: RNCC: 3 | RNVC: 2

10 Jan 1994

5120-12-361-2001
Socket Wrench

123612001
CBD45093G01: RNCC: 3 | RNVC: 2

3 Sep 2003

5120-12-198-7526
Lager- Und Einsatz

121987526
5870055036: RNCC: 3 | RNVC: 2
5870055036: RNCC: 5 | RNVC: 2
026058: RNCC: 5 | RNVC: 2
5870055036: RNCC: 5 | RNVC: 9

23 Feb 1984

5120-12-376-3777
Screwdriver Bit

123763777
05002940001: RNCC: 3 | RNVC: 2
84SW4-SW4: RNCC: 5 | RNVC: 2

22 Sep 2008

5120-12-183-5594
Gegenhalter

121835594
1X56137093: RNCC: 3 | RNVC: 2

29 Apr 1980

5120-12-134-2611

5120-12-374-6364
Torque Wrench Adapter

123746364
F30277232: RNCC: 3 | RNVC: 2

3 Mar 2008

5120-12-338-0581
Drehmo Dreh- Dorn

123380581
116 589 00 15 00: RNCC: 3 | RNVC: 2

17 May 1995

5120-12-198-6586
Aufweitwer Einsatz

121986586
234 790: RNCC: 3 | RNVC: 2

17 Feb 1984

5120-12-145-9600
Spanner Wrench

121459600
N92165A: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-314-0377
Mechanical Puller Attachment

123140377
20 081-1: RNCC: 3 | RNVC: 2

1 Jun 1988

5120-12-365-2756
Hand Scissors Jack

123652756
7C01011031B: RNCC: 3 | RNVC: 2
7D0 011 031 B: RNCC: 5 | RNVC: 9

14 Dec 2004

5120-12-129-6236
Spanner Wrench

121296236
4027750: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-338-6563
Ausdrueckwerkzeug

123386563
B048: RNCC: 3 | RNVC: 2

10 Aug 1995

5120-12-387-1248
Electrical Contact Remover

123871248
1230-33601: RNCC: 3 | RNVC: 2
80996066143: RNCC: 5 | RNVC: 2
80.99606-6143: RNCC: 5 | RNVC: 2

8 Nov 2011

5120-12-363-2190
Drive Pin Punch

123632190
5905890115/00: RNCC: 3 | RNVC: 2

13 May 2004

5120-12-316-1454
Seal Inserter

123161454
1X56136912: RNCC: 3 | RNVC: 2
80.99632-0017: RNCC: 5 | RNVC: 2
80996320017: RNCC: 5 | RNVC: 2

24 Dec 1988

5120-12-120-0689
Digging Pick

121200689
5120-006: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-129-4419

5120-12-140-2291

5120-12-362-2995
Torque Wrench

123622995
2445-MTT 340: RNCC: 3 | RNVC: 2
2445-MTT 340: RNCC: 5 | RNVC: 2

4 Feb 2004

5120-12-380-2836
Screwdriver Bit

123802836
00597: RNCC: 3 | RNVC: 2
269-T6-T8: RNCC: 5 | RNVC: 2

15 Oct 2009

5120-12-041-2743

5120-12-304-5223
Ratchet Wrench

123045223
31K/8: RNCC: 3 | RNVC: 2
624314: RNCC: 5 | RNVC: 2

26 Jul 1985

5120-12-320-0798
Seal Inserter

123200798
19.0147.390.3003: RNCC: 3 | RNVC: 2
19.0147.390.3003: RNCC: 5 | RNVC: 9

5 Dec 1989

5120-12-146-7593
Mechanical Puller

121467593
92010363: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-180-9161
Socket Wrench Crowfoot Attachment

121809161
346589001300: RNCC: 3 | RNVC: 2
7361532: RNCC: 5 | RNVC: 2
3465890013/00: RNCC: 5 | RNVC: 2

11 Oct 1979

5120-12-309-6014
Drift Punch

123096014
W5747 226A: RNCC: 3 | RNVC: 2

6 Feb 1987

5120-12-126-2564

5120-12-357-7340
Eindrueckwerkzeug

123577340
F30276549: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-150-1847
Torque Wrench

121501847
8569-01: RNCC: 3 | RNVC: 2
5120-47: RNCC: 5 | RNVC: 9
K756WEL75-200: RNCC: 5 | RNVC: 9
5120-40412: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-189-5011
Socket Wrench

121895011
895-14: RNCC: 3 | RNVC: 2

1 Oct 1981

5120-12-325-8823
Spanner Wrench

123258823
870/001-134: RNCC: 3 | RNVC: 2

17 Jul 1991

5120-12-301-0006
Spaten Aufnahme

123010006
23114-4133.00: RNCC: 2 | RNVC: 2
23114-4133-00: RNCC: 2 | RNVC: 2
23114-4133.00: RNCC: 3 | RNVC: 2
23114-4133.00: RNCC: 5 | RNVC: 9
23114-4133-00: RNCC: 5 | RNVC: 9
23114-4133.00: RNCC: 5 | RNVC: 9
23114-4133-00: RNCC: 5 | RNVC: 9

15 Sep 1984

5120-12-153-7182
Socket Wrench

121537182
CH2278-13FE: RNCC: 3 | RNVC: 2
5615890608/00: RNCC: 3 | RNVC: 2
561589060800: RNCC: 5 | RNVC: 2
CH2278-13FE: RNCC: 5 | RNVC: 9
561589060300: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-124-1767

5120-12-321-0774
Mechanical Puller Forcing Screw

123210774
99366639: RNCC: 3 | RNVC: 2

26 Mar 1990

5120-12-176-1103
Spanner Wrench

121761103
2089: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-329-0658
Drive Pin Punch

123290658
2300232-991000.023.0: RNCC: 2 | RNVC: 2
2300232-991000.023.0: RNCC: 3 | RNVC: 2

16 Jul 1992

5120-12-199-5711
Gewindee Aufweiter

121995711
SRM 0407 S: RNCC: 3 | RNVC: 9

15 May 1984

5120-12-377-6377
Lamp Extractor

123776377
61-9740.0: RNCC: 3 | RNVC: 2
20-2092: RNCC: 5 | RNVC: 2

30 Jan 2009

5120-12-347-1879
Montierdorn

123471879
0851 3579: RNCC: 3 | RNVC: 2

10 Nov 1998

5120-12-347-1198
Bearing And Bushing Inserter

123471198
80996040199: RNCC: 3 | RNVC: 2
80996040194: RNCC: 5 | RNVC: 9

29 Oct 1998

5120-12-092-1768

5120-12-177-3662
Fuehrungs- Schiene

121773662
0276157000: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-368-8053
Socket Wrench Socket

123688053
771-S23: RNCC: 3 | RNVC: 2
55-23: RNCC: 3 | RNVC: 2
00.51.68.27: RNCC: 5 | RNVC: 2
05010023: RNCC: 5 | RNVC: 2

24 Apr 2006

5120-12-335-0989
Spanner Wrench

123350989
F30005541: RNCC: 3 | RNVC: 2

22 Jul 1994

5120-12-353-6072
Drive Pin Punch

123536072
1111684: RNCC: 3 | RNVC: 2

17 Apr 2001

5120-12-314-3003
Hoisting Link

123143003
1X56136577: RNCC: 3 | RNVC: 2
81.66850-0020: RNCC: 5 | RNVC: 2
81668500020: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-306-8485
Seal Inserter

123068485
8470358: RNCC: 3 | RNVC: 2
4-8208-711: RNCC: 5 | RNVC: 2
8208711: RNCC: 5 | RNVC: 2

10 Apr 1986

5120-12-358-5146
Woven Cable Grip

123585146
234.270: RNCC: 3 | RNVC: 2

22 Oct 2002

5120-12-314-2774
Ge Montierwerkzeug

123142774
0853 1632: RNCC: 3 | RNVC: 2
8531632: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-368-8212
Socket Wrench Screwdriver Attachment

123688212
3210IN-8: RNCC: 3 | RNVC: 2
00.49.74.27: RNCC: 5 | RNVC: 2

25 Apr 2006

5120-12-177-3663
Befestigung Scheibe

121773663
0276160001: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-126-5978
Cross Tip Screwdriver

30 May 1969

5120-12-123-5008
Open End Wrench

121235008
DIN895-36X41: RNCC: 2 | RNVC: 2
895-36X41: RNCC: 3 | RNVC: 2
413111004000: RNCC: 5 | RNVC: 2
183-007: RNCC: 5 | RNVC: 2
36X41DIN895: RNCC: 5 | RNVC: 2
895-36X41: RNCC: 5 | RNVC: 2
860N0224: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5237
Box Wrench

121235237
DIN837-A24X26: RNCC: 2 | RNVC: 2
A24X26DIN837: RNCC: 5 | RNVC: 2
A24X26DIN837GALNI8: RNCC: 5 | RNVC: 9
22-24X26: RNCC: 5 | RNVC: 9
41062426: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-327-5732
Spanner Wrench

123275732
720.32-02-00-00-000: RNCC: 3 | RNVC: 2

4 Feb 1992

5120-12-379-9818
Measurement Module

123799818
7395-1: RNCC: 3 | RNVC: 2
96583628: RNCC: 5 | RNVC: 2

16 Sep 2009

5120-12-368-8039
Open End Box Wrench

123688039
121A-3/4X7/8: RNCC: 3 | RNVC: 2
00.28.09.93: RNCC: 5 | RNVC: 2

21 Apr 2006

5120-12-165-7703
Kartenzieher

121657703
2201228001: RNCC: 3 | RNVC: 2
5800748-27-005: RNCC: 5 | RNVC: 2
22012 28001: RNCC: 5 | RNVC: 9
5800748-27-005: RNCC: 5 | RNVC: 9

24 Jun 1976

5120-12-374-2669
Brake Shoe Adjusting Tool

123742669
3132242: RNCC: 3 | RNVC: 2

1 Feb 2008

5120-12-301-7878
Dreh Winkelscheibe

123017878
F600000277751: RNCC: 3 | RNVC: 2

9 Nov 1984

5120-12-338-2710
Hydraulic Jack Handle

123382710
98428769: RNCC: 3 | RNVC: 2

13 Jun 1995

5120-12-199-6637
Mechanical Puller

121996637
115589003300: RNCC: 3 | RNVC: 2

19 May 1984

5120-12-169-3680
Socket Wrench Screwdriver Attachment

121693680
61275400: RNCC: 3 | RNVC: 2

10 May 1977

5120-12-010-5222

5120-12-155-9520
Swivel Knob Jeweler's Screwdriver

121559520
NM173-06: RNCC: 3 | RNVC: 2
JD5120-12-155-9520: RNCC: 5 | RNVC: 2
NM173-06: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-170-8007
Socket Head Screw Key

121708007
5100069-003000: RNCC: 3 | RNVC: 2
5100069-003000: RNCC: 5 | RNVC: 2
109812U: RNCC: 5 | RNVC: 9

11 Aug 1977

5120-12-300-4864
Schluessel

123004864
G005/126000: RNCC: 3 | RNVC: 2
G005/126000: RNCC: 5 | RNVC: 9

7 Aug 1984

5120-12-021-9259

5120-12-158-9737
Electronic Equipment Alignment Tool

121589737
700-6D: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-368-8569
Einstel Schluessel

123688569
KL-0284-18: RNCC: 3 | RNVC: 2

2 May 2006

5120-12-331-8513
Spanner Wrench

123318513
523500-0000 921: RNCC: 3 | RNVC: 2

28 Jun 1993

5120-12-376-2146
Drive Pin Punch

123762146
JDAL12-200-TCS: RNCC: 3 | RNVC: 2

26 Aug 2008

5120-12-331-8508
Seal Remover

123318508
3151: RNCC: 3 | RNVC: 2

28 Jun 1993

5120-12-153-7938
Schluessel

121537938
CH1774-3: RNCC: 3 | RNVC: 2
820589390700: RNCC: 5 | RNVC: 2
CH1774-3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-360-7794
Electronic Equipment Alignment Tool

123607794
1-475: RNCC: 3 | RNVC: 2

8 Jul 2003

5120-12-167-2940
Combination Box And Open End Wrench

121672940
4020LM3-2: RNCC: 3 | RNVC: 2
16-3,2: RNCC: 3 | RNVC: 2
140503: RNCC: 5 | RNVC: 2
40093232: RNCC: 5 | RNVC: 2

8 Dec 1976

5120-12-176-2824
Montagewerkzeug

121762824
23290-268120: RNCC: 2 | RNVC: 2

23 Nov 1978

5120-12-344-7834
Socket Wrench Socket

123447834
54.0053.300.07: RNCC: 3 | RNVC: 2

9 Dec 1997

5120-12-344-0106
Kraftvervi Stuetze

123440106
10200017: RNCC: 3 | RNVC: 2

28 Aug 1997

5120-12-123-5947
Socket Wrench Crowfoot Attachment

121235947
440A-2: RNCC: 3 | RNVC: 2
03490072: RNCC: 5 | RNVC: 2
1950Z2: RNCC: 5 | RNVC: 9
105628: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-9860
Socket Wrench Screwdriver Attachment

123689860
3243-TX 9: RNCC: 3 | RNVC: 2
00.45.17.55: RNCC: 5 | RNVC: 2

10 May 2006

5120-12-342-8694
Crimping Tool Die

123428694
R25: RNCC: 3 | RNVC: 2

10 Apr 1997

5120-12-197-8266
Socket Wrench Set

121978266
1494-06 SAE: RNCC: 3 | RNVC: 2

25 Nov 1983

5120-12-123-5761
Socket Wrench Socket

121235761
NO PRIMARY REF 12-123-5761: RNCC: 3 | RNVC: 2
109741: RNCC: 5 | RNVC: 9
7800DM38: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-191-4832
Face Spanner Wrench Socket

121914832
S51513-0000: RNCC: 3 | RNVC: 2

4 Feb 1982

5120-12-140-9284
Open End Box Wrench

121409284
7101-86-01-38: RNCC: 3 | RNVC: 2
169121101: RNCC: 5 | RNVC: 2
7101-86-01-38: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5647
Combination Box And Open End Wrench

121235647
87AF13/16: RNCC: 3 | RNVC: 2
14A13-16: RNCC: 3 | RNVC: 2
1952Z13-16: RNCC: 3 | RNVC: 2
1B-13/16: RNCC: 3 | RNVC: 2
87AF13-16: RNCC: 5 | RNVC: 2
40504242: RNCC: 5 | RNVC: 2
105757: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-188-1184
Einbauwerkzeug

121881184
71-036/A3: RNCC: 3 | RNVC: 2

5 Jun 1981

5120-12-378-8500
Fixed Open End Wrench Set

123788500
071330442: RNCC: 3 | RNVC: 2
A0713 304 42: RNCC: 5 | RNVC: 2
391411512101: RNCC: 6 | RNVC: 9

19 May 2009

5120-12-340-2572
Hand Shovel

123402572
SCHAUFEL: RNCC: 3 | RNVC: 2

20 Mar 1996

5120-12-010-1410

5120-12-151-6686
Box Wrench

121516686
31-353-017-1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-357-6633
Pliers

123576633
NO PRIMARY REF 12-357-6633: RNCC: 3 | RNVC: 2
6251.780.013.000: RNCC: 5 | RNVC: 2
MNZ99001: RNCC: 5 | RNVC: 9

10 Jul 2002

5120-12-311-1048
Mechanical Puller Attachment

123111048
503R/2K2: RNCC: 3 | RNVC: 2
620589003400: RNCC: 5 | RNVC: 2

27 Jul 1987

5120-12-387-9651
Flat Tip Screwdriver

123879651
26964: RNCC: 3 | RNVC: 2
302K-4,0: RNCC: 5 | RNVC: 2

13 Feb 2012

5120-12-168-3500
C Clamp

121683500
160-88350: RNCC: 3 | RNVC: 2
160-88350: RNCC: 5 | RNVC: 9

10 Mar 1977

5120-12-341-6355
Electronic Equipment Alignment Tool

123416355
1-167: RNCC: 3 | RNVC: 2

8 Oct 1996

5120-12-158-1047
Spanner Wrench

121581047
SS2881-4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-176-1326
Socket Head Screw Key

121761326
C1997M3: RNCC: 3 | RNVC: 2
148474: RNCC: 5 | RNVC: 2
C1997M3MM: RNCC: 6 | RNVC: 9

9 Nov 1978

5120-12-357-7262
Spring Inserter And Remover

123577262
9249974000: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-172-9639
Digging Pick

121729639
61875: RNCC: 3 | RNVC: 9

6 Mar 1978

5120-12-312-2170
Montierwerk Huelse

123122170
VW551: RNCC: 3 | RNVC: 2

4 Dec 1987

5120-12-171-3426
Hand Vise

121713426
51012140: RNCC: 3 | RNVC: 9

30 Sep 1977

5120-12-358-1997
Socket Wrench Handle

123581997
712012: RNCC: 3 | RNVC: 2
712 012: RNCC: 5 | RNVC: 2

25 Sep 2002

5120-12-350-3243
Drive Pin Punch

123503243
5600023-990100.003.0: RNCC: 2 | RNVC: 2
5600023-990100.003.0: RNCC: 3 | RNVC: 2

15 Mar 2000

5120-12-308-2253
Mechanical Puller

123082253
4985062: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-12-384-4992
Rotat Holding Tool

123844992
F6559604: RNCC: 3 | RNVC: 2

1 Mar 2011

5120-12-390-6933
Bearing And Bushing Inserter And Remover

123906933
T621P3004051: RNCC: 3 | RNVC: 2

4 Dec 2012

5120-12-188-9074
Montagevorrichtung

121889074
406589025900: RNCC: 3 | RNVC: 2

6 Aug 1981

5120-12-150-2076
Flat Tip Screwdriver

121502076
NM256-14: RNCC: 3 | RNVC: 2
AWN481-1-2X9NM: RNCC: 5 | RNVC: 2
JD5120-12-150-2076: RNCC: 5 | RNVC: 2
AWN481-1-2X9NM: RNCC: 5 | RNVC: 2
NM256-14: RNCC: 5 | RNVC: 9
AWN481-1-2X9NM: RNCC: 5 | RNVC: 9
A1-2X9X150DIN5265TLAWN481: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-341-1151
Adjustable Wrench

123411151
8070C: RNCC: 3 | RNVC: 2
60CP-6: RNCC: 3 | RNVC: 2
JD3117-150-A: RNCC: 3 | RNVC: 2
0007127: RNCC: 5 | RNVC: 2

30 Jul 1996

5120-12-369-7597
Socket Wrench Socket

123697597
SK950-992001.000.0: RNCC: 3 | RNVC: 2
7081826: RNCC: 5 | RNVC: 2

15 Aug 2006

5120-12-150-5191
Socket Wrench Handle Bar

121505191
CH277-16: RNCC: 3 | RNVC: 2
1205 1861: RNCC: 3 | RNVC: 2
12051861: RNCC: 5 | RNVC: 2
3.415.0.018.035.6: RNCC: 5 | RNVC: 2
26-50-102: RNCC: 5 | RNVC: 9
3-415-0-018-035-6: RNCC: 5 | RNVC: 9
CH277-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1749
Hand Caulking Tool

121261749
NO PRIMARY REF 12-126-1749: RNCC: 3 | RNVC: 2
75-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-145-3596
Socket Wrench

121453596
6162497: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5309
Box Wrench

121235309
2-1 11-16X1 7-8: RNCC: 3 | RNVC: 2
2-438: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-196-5857
Mater Saug- Griff

121965857
VERIBOR 602-1: RNCC: 3 | RNVC: 2

20 Jul 1983

5120-12-168-3126
Spanner Wrench

121683126
264-623: RNCC: 3 | RNVC: 2

7 Mar 1977

5120-12-390-2081
Bearing And Bushing Inserter

123902081
F30372727: RNCC: 3 | RNVC: 2

17 Oct 2012

5120-12-137-8270

5120-12-305-8815
Bearing And Bushing Inserter

123058815
4900059-752070.000.0: RNCC: 2 | RNVC: 2
4900059-752070.000.0: RNCC: 3 | RNVC: 2

30 Dec 1985

5120-12-369-0031
Tap And Reamer Wrench

123690031
100-2: RNCC: 3 | RNVC: 2
01.41.65.03: RNCC: 5 | RNVC: 2

11 May 2006

5120-12-193-4248
Bearing And Bushing Inserter

121934248
460589041500: RNCC: 3 | RNVC: 2

21 Jul 1982

5120-12-186-7316
Seal Inserter

121867316
99373002: RNCC: 3 | RNVC: 2
410410: RNCC: 5 | RNVC: 9
410410: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-135-8243
Dich Einfuehrbuchse

121358243
7-12-18F63: RNCC: 3 | RNVC: 2
35-11-01: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-121-8746
Jaw Cable Grip

121218746
NO PRIMARY REF 12-121-8746: RNCC: 3 | RNVC: 2
1142-3-15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-309-3827
Torque Wrench

123093827
721/100BW: RNCC: 3 | RNVC: 2
721/100: RNCC: 5 | RNVC: 2
721A/100: RNCC: 5 | RNVC: 9
721A/100BW: RNCC: 5 | RNVC: 9
5120-01512: RNCC: 6 | RNVC: 9

20 Jan 1987

5120-12-365-0104
Cross Tip Screwdriver

123650104
4-623: RNCC: 3 | RNVC: 2

23 Nov 2004

5120-12-137-4681
Timber Wedge

121374681
00008936810: RNCC: 3 | RNVC: 2
0000 893 6810: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1857
Gasrohr Klemmfutter

121261857
NO PRIMARY REF 12-126-1857: RNCC: 3 | RNVC: 2
4972-1-8T01-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-141-2548
Screwdriver Bit

121412548
3822-2: RNCC: 3 | RNVC: 2
IKS30-2: RNCC: 3 | RNVC: 2
8806-PH2: RNCC: 3 | RNVC: 2
40810: RNCC: 3 | RNVC: 9
751B2: RNCC: 3 | RNVC: 9
751B-GR,2/48: RNCC: 5 | RNVC: 2
571E524BGR2: RNCC: 5 | RNVC: 9
7407PGR2: RNCC: 5 | RNVC: 9
2486150002: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-150-6194
Schluesseleinsatz

121506194
23176-264530-00-0: RNCC: 2 | RNVC: 2
23176-264530.00.0: RNCC: 2 | RNVC: 2
23176-264530-00-0: RNCC: 5 | RNVC: 2
23176-264530.00.0: RNCC: 5 | RNVC: 2
23176-264530-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-325-1315
Driftpin

123251315
1000173-992000.002.0: RNCC: 2 | RNVC: 2
1000173-992000.002.0: RNCC: 3 | RNVC: 2

7 May 1991

5120-12-340-8871
Combination Box And Open End Wrench

123408871
190AF-3: RNCC: 3 | RNVC: 2
1900143: RNCC: 5 | RNVC: 2

28 Jun 1996

5120-12-312-5356
Ge Montierwerkzeug

123125356
116 589 02 59 00: RNCC: 3 | RNVC: 2
116589025900: RNCC: 5 | RNVC: 2

15 Jan 1988

5120-12-121-8244
Mattock-Pick Handle

121218244
TL5120-007 STTEL: RNCC: 2 | RNVC: 2
12-1200719Z00003: RNCC: 5 | RNVC: 9
12-1200719Z00003: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-309-5573
Socket Wrench

123095573
604-45.12.141-19E: RNCC: 3 | RNVC: 2

4 Feb 1987

5120-12-140-2933

5120-12-318-2658
Face Spanner Wrench Socket

123182658
2996.6669: RNCC: 3 | RNVC: 2
2996.66.69: RNCC: 5 | RNVC: 2

23 Jun 1989

5120-12-094-5847

5120-12-385-1570
Flat Tip Screwdriver

123851570
952654: RNCC: 3 | RNVC: 2

5 May 2011

5120-12-382-8375
Torque Wrench

123828375
42-60048-900: RNCC: 3 | RNVC: 2

13 Aug 2010

5120-12-387-8082
Cran Mounting Tool

123878082
F30450435: RNCC: 3 | RNVC: 2

31 Jan 2012

5120-12-382-2285
Spanner Wrench

123822285
79846: RNCC: 3 | RNVC: 2

25 May 2010

5120-12-349-0140
Box Wrench Set

123490140
2VDE-7T: RNCC: 3 | RNVC: 2

14 Sep 1999

5120-12-348-6086
Socket Wrench Set

123486086
622310-9: RNCC: 3 | RNVC: 2
62231-9T: RNCC: 5 | RNVC: 9

26 Jul 1999

5120-12-183-9845
Screwdriver Bit

121839845
05073110001: RNCC: 3 | RNVC: 2
2220S-GR.4: RNCC: 3 | RNVC: 9
2220S-PH4X45: RNCC: 5 | RNVC: 2
2220GR4: RNCC: 5 | RNVC: 9
73110: RNCC: 5 | RNVC: 9

7 Jun 1980

5120-12-163-1807
Mecha Druckspindel

121631807
NO PRIMARY REF 12-163-1807: RNCC: 3 | RNVC: 2
KDAW9995-14-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5979
Socket Wrench Socket

121235979
NO PRIMARY REF 12-123-5979: RNCC: 3 | RNVC: 2
03440036: RNCC: 5 | RNVC: 9
53A5-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-373-0899
Craftsman's Tweezers

123730899
922206: RNCC: 3 | RNVC: 2
00.18.99.56: RNCC: 5 | RNVC: 2
4003773054672: RNCC: 5 | RNVC: 2

25 Sep 2007

5120-12-127-4468
Mechanical Puller Attachment

121274468
000589683300: RNCC: 3 | RNVC: 2
7083630: RNCC: 5 | RNVC: 2
21-89: RNCC: 5 | RNVC: 2
4521-1-2A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-349-3920
Seal Inserter

123493920
2300281-264000.05.0: RNCC: 2 | RNVC: 2
2300281-264000.05.0: RNCC: 3 | RNVC: 2

9 Nov 1999

5120-12-312-3056
Ausdru Grundplatte

123123056
142750-5: RNCC: 3 | RNVC: 2
80996060267: RNCC: 5 | RNVC: 2

15 Dec 1987

5120-12-351-6890
Montierdorn

123516890
2300211-970700.001.0: RNCC: 2 | RNVC: 2
2300211-970700.001.0: RNCC: 3 | RNVC: 2

15 Aug 2000

5120-12-123-5680
Socket Wrench Socket

121235680
7800DZ1 1-2: RNCC: 3 | RNVC: 2
109762: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-359-6145
Eindrueckwerkzeugte

123596145
T631P3004101: RNCC: 3 | RNVC: 2

21 Feb 2003

5120-12-314-3530
Flat Tip Screwdriver Set

123143530
NO PRIMARY REF 12-314-3530: RNCC: 3 | RNVC: 2
4439310006: RNCC: 5 | RNVC: 9
829/6K: RNCC: 5 | RNVC: 9

29 Jun 1988

5120-12-026-8578

5120-12-193-0239
Socket Wrench Handle

121930239
NM 389-51: RNCC: 3 | RNVC: 2
NM389-51: RNCC: 5 | RNVC: 2
NM 389-51: RNCC: 5 | RNVC: 9
NM389-51: RNCC: 5 | RNVC: 9

15 Jun 1982

5120-12-181-6887
Druecker

121816887
8470251: RNCC: 3 | RNVC: 2
VW2037: RNCC: 3 | RNVC: 9
8207-857: RNCC: 5 | RNVC: 2

10 Dec 1979

5120-12-330-0051
Mechanical Puller Attachment

123300051
0852 0363.006: RNCC: 3 | RNVC: 2
8520363.006: RNCC: 5 | RNVC: 2

21 Oct 1992

5120-12-374-4467
Seal Inserter

123744467
740589011500: RNCC: 3 | RNVC: 2

18 Feb 2008

5120-12-161-5482
Hand Tube Bender

121615482
4-2829R: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-139-3157

5120-12-307-4146
Eindrueckwerkzeugte

123074146
105-31803W1.01: RNCC: 3 | RNVC: 2

13 Jun 1986

5120-12-190-7742
Welle Halter

121907742
144100: RNCC: 3 | RNVC: 2

14 Dec 1981

5120-12-353-9186
Mechanical Puller

123539186
4524G: RNCC: 3 | RNVC: 2
1718596: RNCC: 5 | RNVC: 2

18 May 2001

5120-12-170-9756
Flat Tip Screwdriver

121709756
6000001: RNCC: 3 | RNVC: 2
9710-1: RNCC: 3 | RNVC: 9
9710-1-0-5X3-5X75: RNCC: 5 | RNVC: 9

26 Aug 1977

5120-12-155-0613
Spanner Wrench

121550613
3-62-021: RNCC: 3 | RNVC: 2
3-62-021: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-309-6566
Spanner Wrench

123096566
33 59 27-9032.000: RNCC: 3 | RNVC: 2
335927-9032.000: RNCC: 5 | RNVC: 2
6264.10-6: RNCC: 5 | RNVC: 2
33 59 27-9032.000: RNCC: 5 | RNVC: 9
335927-9032-000: RNCC: 5 | RNVC: 9

13 Feb 1987

5120-12-310-0434
Box Wrench

123100434
2AF1-7-16X1-5-8: RNCC: 3 | RNVC: 2
TVA5120-2-263-031.1.1.45: RNCC: 5 | RNVC: 2
20A1 7/16X1 5/8: RNCC: 5 | RNVC: 9

31 Mar 1987

5120-12-186-6030
Drive Pin Punch

121866030
3408012: RNCC: 3 | RNVC: 2
74530-12: RNCC: 5 | RNVC: 9
74530-12X180: RNCC: 5 | RNVC: 9

21 Jan 1981

5120-12-381-4585
Spanner Wrench

123814585
41012: RNCC: 3 | RNVC: 2
764AZ-40-80/4: RNCC: 5 | RNVC: 2

19 Feb 2010

5120-12-123-5595
Schluesseleinsatzsa

121235595
NO PRIMARY REF 12-123-5595: RNCC: 3 | RNVC: 2
107886: RNCC: 5 | RNVC: 9
157767: RNCC: 5 | RNVC: 9
4115-4-4: RNCC: 5 | RNVC: 9
4115-4B: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-324-5682
Mechanical Puller Attachment

123245682
VM563-2: RNCC: 3 | RNVC: 2
AZV906669-2: RNCC: 5 | RNVC: 2

28 Feb 1991

5120-12-358-1454
Cross Tip Screwdriver

123581454
6133222: RNCC: 3 | RNVC: 2
613 322 2: RNCC: 5 | RNVC: 2

18 Sep 2002

5120-12-390-0459
Door Lock Open Tool

123900459
KV2025-1,5: RNCC: 3 | RNVC: 2

27 Sep 2012

5120-12-386-8071
Torque Wrench

123868071
05074701003: RNCC: 3 | RNVC: 2
7441: RNCC: 5 | RNVC: 2

4 Oct 2011

5120-12-358-4162
Plier Wrench

123584162
7140906: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-12-315-2903
Montierhuelse

123152903
5505891259/00: RNCC: 3 | RNVC: 2
5505891259/00: RNCC: 5 | RNVC: 2
5505891259/00: RNCC: 5 | RNVC: 2
550589125900: RNCC: 5 | RNVC: 9

11 Oct 1988

5120-12-139-9501
Nietauftreiber

121399501
100129-9200-22: RNCC: 3 | RNVC: 2
100129-9200.22: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-385-6773
Pliers Insert

123856773
81 19 230: RNCC: 3 | RNVC: 2
4003773050124: RNCC: 5 | RNVC: 2
706720-230: RNCC: 5 | RNVC: 2

29 Jun 2011

5120-12-354-8975
Torque Wrench

123548975
8563-02: RNCC: 3 | RNVC: 2
8563-02: RNCC: 3 | RNVC: 2

3 Sep 2001

5120-12-390-1910
Bearing And Bushing Inserter

123901910
F30377353: RNCC: 3 | RNVC: 2

12 Oct 2012

5120-12-384-1698
Blind Riveter Nosepiece

123841698
7252148: RNCC: 3 | RNVC: 2

28 Jan 2011

5120-12-359-8096
Eindrueckwerkzeugte

123598096
T622P3007101: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-12-321-1361
We Montierwerkzeug

123211361
F6370990: RNCC: 3 | RNVC: 2
F601006370990: RNCC: 5 | RNVC: 9

2 Apr 1990

5120-12-389-4269
Retaining Ring Pliers Set

123894269
700135-4: RNCC: 3 | RNVC: 2

4 Jul 2012

5120-12-177-3655
Spann- Hebel

121773655
0276093205: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-199-4980
Screw Thread Insert Extractor

121994980
SRM 0305 R: RNCC: 3 | RNVC: 2
SRM 0305 R: RNCC: 5 | RNVC: 9

3 May 1984

5120-12-197-6071
Face Spanner Wrench Socket

121976071
403 589 02 07 00: RNCC: 3 | RNVC: 2
403589020700: RNCC: 5 | RNVC: 2

7 Nov 1983

5120-12-351-9593

5120-12-123-5839
Socket Wrench Socket

121235839
DIN3124-S27X20L: RNCC: 2 | RNVC: 2
CH1983-1-10: RNCC: 3 | RNVC: 2
56-27: RNCC: 3 | RNVC: 2
S27X20LDIN3124: RNCC: 5 | RNVC: 2
05020027: RNCC: 5 | RNVC: 2
550589010900: RNCC: 5 | RNVC: 2
550589010900: RNCC: 5 | RNVC: 2
550589010900: RNCC: 5 | RNVC: 2
F30004976: RNCC: 5 | RNVC: 2
CH1983-1-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-166-1973
Mechanical Puller

121661973
23303-266200.00: RNCC: 2 | RNVC: 2
619-45.10.200-02E: RNCC: 3 | RNVC: 2
4-19-0189851: RNCC: 3 | RNVC: 2
23303-266200.00: RNCC: 5 | RNVC: 2
23303-266200.00: RNCC: 5 | RNVC: 2
23303-266200-00: RNCC: 5 | RNVC: 9
619-45-10-200-02: RNCC: 5 | RNVC: 9
619-45.10.200-02: RNCC: 5 | RNVC: 9
23303-266200-00: RNCC: 5 | RNVC: 9

12 Aug 1976

5120-12-196-6863
Montierhuelse

121966863
4900059-751740.000.0: RNCC: 2 | RNVC: 2
4900059-751740.000.0: RNCC: 3 | RNVC: 2
4900059-751740.000.0: RNCC: 5 | RNVC: 2
4900059-751740-000-0: RNCC: 5 | RNVC: 2

2 Aug 1983

5120-12-154-1029
B Anschluszstutzen

121541029
CH1774-20: RNCC: 3 | RNVC: 2
820589506300: RNCC: 5 | RNVC: 2
CH1774-20: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-300-8569
Mechanical Puller

123008569
1423-200.82(3): RNCC: 3 | RNVC: 2

5 Sep 1984

5120-12-312-7849
W Spannvorrichtung

123127849
510028: RNCC: 2 | RNVC: 9

4 Feb 1988

5120-12-352-8807
Schluessel

123528807
1069-7: RNCC: 3 | RNVC: 2
43330007: RNCC: 5 | RNVC: 2

28 Dec 2000

5120-12-189-9990
Spanner Wrench

121899990
250198-1000-00: RNCC: 2 | RNVC: 2

2 Nov 1981

5120-12-315-0521
Fuehrungs- Platte

123150521
2300231-262000.001.0: RNCC: 2 | RNVC: 2
2300231-262000.001.0: RNCC: 3 | RNVC: 2

9 Sep 1988

5120-12-388-5163
Hand Reel Jack

123885163
2000002-991080.000.0: RNCC: 3 | RNVC: 2

28 Mar 2012

5120-12-126-1578

5120-12-135-0037

5120-12-175-7796
Socket Wrench

121757796
05410010: RNCC: 3 | RNVC: 9
6-161: RNCC: 3 | RNVC: 9
425-10: RNCC: 3 | RNVC: 9
50420: RNCC: 5 | RNVC: 2
33BPN10: RNCC: 5 | RNVC: 9
1930110024: RNCC: 5 | RNVC: 9

16 Oct 1978

5120-12-388-8095
Mechanical Puller

123888095
009.089: RNCC: 3 | RNVC: 2
009.089: RNCC: 5 | RNVC: 2

25 Apr 2012

5120-12-336-5855
Montierdorn

123365855
0851 6673: RNCC: 3 | RNVC: 2
8516673: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-179-7993
Schluesseleinsatz

121797993
31VR22: RNCC: 3 | RNVC: 2
626287: RNCC: 5 | RNVC: 2

30 Jul 1979

5120-12-153-7953
Piston Ring Compressor

121537953
CH2522-4: RNCC: 3 | RNVC: 2
560589013700: RNCC: 5 | RNVC: 2
CH2522-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-329-1261
Socket Head Screw Key

123291261
2300232-991000.027.0: RNCC: 2 | RNVC: 2
2300232-991000.027.0: RNCC: 3 | RNVC: 2

21 Jul 1992

5120-12-340-4880
Electronic Equipment Alignment Tool

123404880
1-525: RNCC: 3 | RNVC: 2

23 Apr 1996

5120-12-176-0475
Open End Wrench

121760475
C900M25X28: RNCC: 3 | RNVC: 2
420 0506: RNCC: 3 | RNVC: 2
4200506: RNCC: 3 | RNVC: 2
103220: RNCC: 5 | RNVC: 2
905029: RNCC: 5 | RNVC: 9
C900M25X28: RNCC: 6 | RNVC: 9

6 Nov 1978

5120-12-305-4793
Pedal Adjustment Tool Compressor

123054793
309589033100: RNCC: 3 | RNVC: 2

12 Nov 1985

5120-12-303-3138
Ku Montierwerkzeug

123033138
606589012300: RNCC: 3 | RNVC: 2

13 Mar 1985

5120-12-342-1417
Socket Wrench

123421417
3000.30841.00.08-OZ 17: RNCC: 3 | RNVC: 2

18 Dec 1996

5120-12-173-0337
Spanner Wrench

121730337
709126-0000901: RNCC: 3 | RNVC: 2
709126-0000.901: RNCC: 5 | RNVC: 2

15 Mar 1978

5120-12-147-1103
Box Wrench

121471103
8-293-406-000D: RNCC: 3 | RNVC: 2
KK70-75: RNCC: 5 | RNVC: 2
S4-6804-129: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-390-0460
Door Lock Open Tool

123900460
KV1016-1,7: RNCC: 3 | RNVC: 2

27 Sep 2012

5120-12-365-0766
Socket Head Screw Key

123650766
42T2,5: RNCC: 3 | RNVC: 2
6354130: RNCC: 5 | RNVC: 2

25 Nov 2004

5120-12-314-1592
Mechanical Puller

123141592
AZV906669: RNCC: 3 | RNVC: 2

14 Jun 1988

5120-12-362-9345
Mechanical Puller

123629345
4999004-300: RNCC: 3 | RNVC: 2

16 Apr 2004

5120-12-170-4741
Socket Wrench

121704741
NO PRIMARY REF 12-170-4741: RNCC: 3 | RNVC: 2
134412: RNCC: 5 | RNVC: 9
1936M5-5X7: RNCC: 5 | RNVC: 9

14 Jul 1977

5120-12-171-2826
Druckstueck

121712826
105-31821W3.02: RNCC: 3 | RNVC: 2
105-31821W3-02: RNCC: 5 | RNVC: 2

26 Sep 1977

5120-12-153-7969
Socket Wrench Socket

121537969
CH1773-16: RNCC: 3 | RNVC: 2
5605890961/00: RNCC: 5 | RNVC: 2
560589096100: RNCC: 5 | RNVC: 2
CH1773-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-7184
Socket Wrench Extension

121537184
CH1772-37NM: RNCC: 3 | RNVC: 2
561589061500: RNCC: 5 | RNVC: 2
5615890615/00: RNCC: 5 | RNVC: 2
CH1772-37NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-331-3481
Socket Wrench Set

123313481
30HMU-10: RNCC: 3 | RNVC: 2
623547: RNCC: 5 | RNVC: 2

27 Apr 1993

5120-12-338-3067
Socket Head Screw Key

123383067
626-2X60: RNCC: 3 | RNVC: 2
626 201 10: RNCC: 5 | RNVC: 2

20 Jun 1995

5120-12-392-1067
Socket Wrench Socket

123921067
973448: RNCC: 3 | RNVC: 2

6 May 2013

5120-12-151-6518
Screwdriver Bit

121516518
INX19-10: RNCC: 3 | RNVC: 2
990-10: RNCC: 3 | RNVC: 2
54X-M10: RNCC: 3 | RNVC: 2
03060010: RNCC: 5 | RNVC: 2
INX19-10: RNCC: 5 | RNVC: 2
00503305: RNCC: 5 | RNVC: 2
50-33M10-63: RNCC: 5 | RNVC: 2
2487170004: RNCC: 5 | RNVC: 9
INX19-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-2904
Open End Wrench

121942904
DIN3114-30: RNCC: 2 | RNVC: 2
30DIN3114: RNCC: 5 | RNVC: 2

20 Oct 1982

5120-12-356-7969
Box Wrench

123567969
TX4-E6XE8: RNCC: 3 | RNVC: 2

8 Apr 2002

5120-12-386-7847
Jack Stand

123867847
84187/2600-02: RNCC: 3 | RNVC: 2

29 Sep 2011

5120-12-173-6903
Spanner Wrench

121736903
5224-600: RNCC: 2 | RNVC: 2
W2359-30: RNCC: 3 | RNVC: 2
5224-600: RNCC: 5 | RNVC: 2
5224-600: RNCC: 5 | RNVC: 9
W2359-30: RNCC: 5 | RNVC: 9
5224-600: RNCC: 5 | RNVC: 9
5224-600: RNCC: 5 | RNVC: 9

3 May 1978

5120-12-191-2067
Box Wrench

121912067
0003-4297-110: RNCC: 3 | RNVC: 2
0003-4297-110: RNCC: 5 | RNVC: 9

18 Jan 1982

5120-12-330-2628
Elektron Auszieher

123302628
4900255-224000-00-01: RNCC: 2 | RNVC: 2
4900255-224000-00-01: RNCC: 3 | RNVC: 2

24 Nov 1992

5120-12-190-5623
Abziehklauen

121905623
1-90: RNCC: 3 | RNVC: 2

2 Dec 1981

5120-12-316-9313
Mechanical Puller

123169313
2300279-7122.00: RNCC: 2 | RNVC: 2
2300279-7122.00: RNCC: 3 | RNVC: 2
9874821: RNCC: 5 | RNVC: 2
2300279-7122.00: RNCC: 5 | RNVC: 9
9 874 821: RNCC: 5 | RNVC: 9
9874821: RNCC: 5 | RNVC: 9

28 Feb 1989

5120-12-139-2468
Verschluszschraube

121392468
074M00500: RNCC: 3 | RNVC: 2
VM62051: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-362-5420
Craftsman's Tweezers

123625420
54.0084.960.71: RNCC: 3 | RNVC: 2
5516I: RNCC: 5 | RNVC: 2

5 Mar 2004

5120-12-362-4812
Combination Box And Open End Wrench

123624812
54.0084.960.56: RNCC: 3 | RNVC: 2
13-22: RNCC: 5 | RNVC: 2

2 Mar 2004

5120-12-343-2060
An Montierwerkzeug

123432060
EBAB003: RNCC: 3 | RNVC: 2

20 May 1997

5120-12-365-3796
Socket Wrench Socket

123653796
10500962: RNCC: 3 | RNVC: 2
LET00122: RNCC: 5 | RNVC: 2

23 Dec 2004

5120-12-368-8187
Socket Wrench Screwdriver Attachment

123688187
3220-PH4: RNCC: 3 | RNVC: 2
00.50.16.69: RNCC: 5 | RNVC: 2

25 Apr 2006

5120-12-173-1167
Spezial- Schluessel

121731167
4150: RNCC: 3 | RNVC: 9

20 Mar 1978

5120-12-388-5474
Installation And Re

123885474
1X56 097 775: RNCC: 3 | RNVC: 2

29 Mar 2012

5120-12-387-5764
Hammer Handle

123875764
071573505: RNCC: 3 | RNVC: 2

11 Jan 2012

5120-12-339-7799
Electrical Contact Remover

123397799
5828 2 093-10: RNCC: 3 | RNVC: 2
C39407-A139-A5: RNCC: 5 | RNVC: 2
5828 2 093-10: RNCC: 5 | RNVC: 9

17 Jan 1996

5120-12-141-2958
Socket Head Screw Key Set

121412958
NO PRIMARY REF 12-141-2958: RNCC: 3 | RNVC: 2
571F005SATZ: RNCC: 5 | RNVC: 2
6313: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-332-9218
Torque Wrench Adapter

123329218
20/0-10: RNCC: 3 | RNVC: 2
0195464P00: RNCC: 5 | RNVC: 2
20-0-10: RNCC: 5 | RNVC: 2
20-0-10: RNCC: 5 | RNVC: 2
85-694-9952: RNCC: 6 | RNVC: 9

5 Oct 1993

5120-12-196-2112
Cable Type Ratchet Lever Puller

121962112
X016: RNCC: 2 | RNVC: 9
5120-21200: RNCC: 6 | RNVC: 9

13 Jun 1983

5120-12-306-8047
Seal Inserter

123068047
9110407: RNCC: 3 | RNVC: 2
32000047104000: RNCC: 5 | RNVC: 2
81761371: RNCC: 5 | RNVC: 9
F.120 32 000 0471 04 000: RNCC: 5 | RNVC: 9

3 Apr 1986

5120-12-324-6369
Box Wrench

123246369
3923-0019-568620: RNCC: 3 | RNVC: 2

8 Mar 1991

5120-12-120-5705
Trowel

121205705
DIN6440-A220: RNCC: 2 | RNVC: 2
A220DIN6440: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-1810
Hand Hammer

121261810
204: RNCC: 3 | RNVC: 2
4420303: RNCC: 3 | RNVC: 2
TL5180-0086-140: RNCC: 5 | RNVC: 9
107336: RNCC: 5 | RNVC: 9
3530: RNCC: 5 | RNVC: 9
5180-0086-13: RNCC: 5 | RNVC: 9
5180-086-13: RNCC: 5 | RNVC: 9
TL5180-0086-13: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-349-4539
Montierhuelse

123494539
12 12 2 306 064: RNCC: 3 | RNVC: 2

17 Nov 1999

5120-12-153-5200
Dorn

121535200
CH1772-42-7NM: RNCC: 3 | RNVC: 2
8205893861/08: RNCC: 5 | RNVC: 2
820589386108: RNCC: 5 | RNVC: 2
CH1772-42-7NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-358-2006
Lifting Pneumatic Bag Kit

123582006
3500 0002 00: RNCC: 3 | RNVC: 2
350 00 000: RNCC: 5 | RNVC: 9
1730-90026: RNCC: 6 | RNVC: 9

25 Sep 2002

Load More Results