What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 35 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 35 of 62

5120-12-368-8098
Combination Box And Open End Wrench

123688098
40101313-TCS: RNCC: 3 | RNVC: 2

24 Apr 2006

5120-12-368-8275
Socket Wrench

123688275
4040M/S6: RNCC: 3 | RNVC: 2

26 Apr 2006

5120-12-318-9898
Saddler's Pegging Awl

123189898
493 063 10: RNCC: 3 | RNVC: 2
49306310: RNCC: 5 | RNVC: 2

29 Aug 1989

5120-12-346-1889
Jack Elevating Block

123461889
3565830041: RNCC: 3 | RNVC: 2

24 Jun 1998

5120-12-387-6818
Mechanical Puller

123876818
F30450991: RNCC: 3 | RNVC: 2

24 Jan 2012

5120-12-126-1579
Pliers

121261579
DIN5258-A180GERAUHT: RNCC: 2 | RNVC: 2
A180DIN5258GERAUHT: RNCC: 5 | RNVC: 2
1-180: RNCC: 5 | RNVC: 9
W205: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-178-9636
Hand Blind Riveter

121789636
91512: RNCC: 3 | RNVC: 2
94915: RNCC: 3 | RNVC: 2
NTX: RNCC: 3 | RNVC: 2
NTXBZ2: RNCC: 3 | RNVC: 9
53195-020: RNCC: 5 | RNVC: 2
GESNTXBZ2: RNCC: 5 | RNVC: 2
TVA5120-2-263-041: RNCC: 5 | RNVC: 2
GESNTX: RNCC: 5 | RNVC: 2
GES1PA NT X: RNCC: 5 | RNVC: 9

28 May 1979

5120-12-196-3719
Box Wrench

121963719
2-7X8: RNCC: 3 | RNVC: 2
84-7X8: RNCC: 3 | RNVC: 2
084006: RNCC: 5 | RNVC: 2

30 Jun 1983

5120-12-373-8885
Mechanical Puller Attachment

123738885
80996020193: RNCC: 3 | RNVC: 2
80.99602-0193: RNCC: 5 | RNVC: 2

17 Dec 2007

5120-12-328-6480
Mechanical Puller

123286480
KDEP1535: RNCC: 3 | RNVC: 2
F600000376586: RNCC: 5 | RNVC: 2
F6376586: RNCC: 5 | RNVC: 2

11 Jun 1992

5120-12-365-3296
Driftpin

123653296
5580327: RNCC: 3 | RNVC: 2
(241)A42495580327: RNCC: 8 | RNVC: 2
5580327: RNCC: 8 | RNVC: 2

21 Dec 2004

5120-12-173-4345
Spanner Wrench

121734345
532008G16W5: RNCC: 3 | RNVC: 2
532008G16W5: RNCC: 5 | RNVC: 2
532008G16W5: RNCC: 5 | RNVC: 9
532008G16W5: RNCC: 5 | RNVC: 9

14 Apr 1978

5120-12-354-7098
Hand Hydraulic Jack

123547098
6.370-955.0: RNCC: 3 | RNVC: 2

17 Aug 2001

5120-12-362-3832
Quick Adjusting Screw Clamp

123623832
2500261-993212.000.0: RNCC: 2 | RNVC: 2
2500261-993212.000.0: RNCC: 3 | RNVC: 2

16 Feb 2004

5120-12-364-3134
Socket Wrench Socket

123643134
01030014-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-198-3245
Mechanical Puller

121983245
3907.62000.001: RNCC: 3 | RNVC: 2
80996020019: RNCC: 3 | RNVC: 2

13 Jan 1984

5120-12-383-6819
Ge Montierwerkzeug

123836819
1X56.095.076: RNCC: 3 | RNVC: 2

24 Nov 2010

5120-12-176-7738
Abziehv Druckstueck

121767738
111690: RNCC: 3 | RNVC: 2
111690: RNCC: 3 | RNVC: 9
0111690: RNCC: 5 | RNVC: 9

18 Dec 1978

5120-12-314-6083
Seal Inserter And Remover

123146083
0852 8780: RNCC: 3 | RNVC: 2
8528780: RNCC: 5 | RNVC: 2

22 Jul 1988

5120-12-131-2844
Zylinder Reiniger

121312844
856: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-090-5453

5120-12-317-1474
Crimping Tool Die

123171474
300438447: RNCC: 3 | RNVC: 2

14 Mar 1989

5120-12-199-5559
Screw Thread Insert Inserter

121995559
SRM 0407W: RNCC: 3 | RNVC: 2
SRM 0407W: RNCC: 5 | RNVC: 9

11 May 1984

5120-12-123-7101

5120-12-182-6688
Drive Pin Punch

121826688
51283510: RNCC: 3 | RNVC: 2
51283025: RNCC: 3 | RNVC: 9
957314: RNCC: 5 | RNVC: 2
3646L-2,5: RNCC: 5 | RNVC: 9
180463: RNCC: 5 | RNVC: 9

20 Feb 1980

5120-12-171-9952
Socket Wrench Socket

121719952
6300M5-5: RNCC: 3 | RNVC: 2
108762: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-322-6697
Socket Wrench Screwdriver Attachment

123226697
2300223-264100.04.0: RNCC: 2 | RNVC: 2
2300223-264100.04.0: RNCC: 3 | RNVC: 2

11 Sep 1990

5120-12-353-4446
Socket Wrench

123534446
28M-14: RNCC: 3 | RNVC: 2
1834715: RNCC: 5 | RNVC: 2

23 Mar 2001

5120-12-386-9522
Spanner Wrench

123869522
54.0160.073.00: RNCC: 3 | RNVC: 2
14100076980: RNCC: 5 | RNVC: 2

20 Oct 2011

5120-12-376-4035
Screwdriver Bit

123764035
05002933001: RNCC: 3 | RNVC: 2
83-PH2-PZ2: RNCC: 5 | RNVC: 2

25 Sep 2008

5120-12-326-0177
Engine Valve Seat Insert Replacing Tool

123260177
103589031500: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-340-2202
Seal Inserter And Remover

123402202
2300232-992000.008.0: RNCC: 2 | RNVC: 2
2300232-992000.008.0: RNCC: 3 | RNVC: 2

15 Mar 1996

5120-12-383-0344
Socket Wrench Extension

123830344
598101-990000.026.0: RNCC: 2 | RNVC: 2
598101-990000.026.0: RNCC: 3 | RNVC: 2

7 Sep 2010

5120-12-329-5240
Spanner Wrench

123295240
081-140170-902-0: RNCC: 2 | RNVC: 2
081-140170-902-0: RNCC: 3 | RNVC: 2

27 Aug 1992

5120-12-324-6777
Pliers

123246777
489301250: RNCC: 3 | RNVC: 2
124: RNCC: 3 | RNVC: 2
000589533700: RNCC: 3 | RNVC: 2
791-5: RNCC: 3 | RNVC: 2
11063: RNCC: 3 | RNVC: 2
282: RNCC: 3 | RNVC: 2
5753620001: RNCC: 5 | RNVC: 9

15 Mar 1991

5120-12-319-8204
Pliers

123198204
23-A: RNCC: 3 | RNVC: 2
TYP23A: RNCC: 5 | RNVC: 2

8 Nov 1989

5120-12-369-3189
Socket Wrench Handle Bar

123693189
80996170187: RNCC: 3 | RNVC: 2
80.99617-0187: RNCC: 5 | RNVC: 2

21 Jun 2006

5120-12-174-2272
Drive Pin Punch

121742272
3658A150X6: RNCC: 3 | RNVC: 2
107533: RNCC: 5 | RNVC: 2
3658A-6: RNCC: 5 | RNVC: 2
3658A6: RNCC: 5 | RNVC: 2
107535: RNCC: 5 | RNVC: 9

15 Jun 1978

5120-12-123-5935
Socket Wrench Crowfoot Attachment

121235935
440A1-1/16: RNCC: 3 | RNVC: 2
105613: RNCC: 5 | RNVC: 9
1950Z1-1-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-1311
Druckstueck

121711311
100227-93600.02: RNCC: 2 | RNVC: 2
9010-0573-00-02: RNCC: 3 | RNVC: 2
100227-93600.02: RNCC: 5 | RNVC: 9

9 Sep 1977

5120-12-192-8059
Bearing And Bushing Inserter

121928059
389 589 02 15 00: RNCC: 3 | RNVC: 2
389589021500: RNCC: 3 | RNVC: 2

26 May 1982

5120-12-376-0710
Spatula

123760710
38320040: RNCC: 3 | RNVC: 2
0926585: RNCC: 5 | RNVC: 2
4005153010131: RNCC: 5 | RNVC: 2

8 Aug 2008

5120-12-090-5526

5120-12-349-3923
Schluessel

123493923
2300281-264000.001.0: RNCC: 2 | RNVC: 2
2300281-264000.001.0: RNCC: 3 | RNVC: 2

9 Nov 1999

5120-12-367-1976
Socket Wrench Socket

123671976
DIN3124-S8X10L: RNCC: 2 | RNVC: 2
0713122108: RNCC: 3 | RNVC: 2

19 Jul 2005

5120-12-702-9026
Spanner Wrench

127029026
4709100-80-1C: RNCC: 3 | RNVC: 2

5 Sep 1996

5120-12-352-1914
Socket Wrench Socket

123521914
TL5120-0132-E5: RNCC: 2 | RNVC: 2
50TX-E16: RNCC: 3 | RNVC: 2
03270016: RNCC: 5 | RNVC: 2

24 Oct 2000

5120-12-126-4672
Electronic Equipment Alignment Tool

121264672
NO PRIMARY REF 12-126-4672: RNCC: 3 | RNVC: 2
108682: RNCC: 5 | RNVC: 9
5504A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-1591
Open End Wrench

121561591
NM284-12: RNCC: 3 | RNVC: 2
NM284-12: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-090-5458

5120-12-147-6365

5120-12-158-1053
Mechanical Puller

121581053
SS2953: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-134-2615
Mechanical Puller

121342615
005M01500: RNCC: 3 | RNVC: 2
VM76336-1-2: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-147-3195

5120-12-391-2828
Open End Wrench

123912828
40030810-TCS: RNCC: 3 | RNVC: 2

1 Mar 2013

5120-12-193-8243
Fuehrung Mit Nietzu

121938243
349197: RNCC: 3 | RNVC: 2

2 Sep 1982

5120-12-362-6413
Swivel Knob Jeweler's Screwdriver Set

123626413
54.0084.961.60: RNCC: 3 | RNVC: 2
52708020: RNCC: 5 | RNVC: 2

13 Mar 2004

5120-12-321-9223
Open End Wrench

123219223
3114-13: RNCC: 3 | RNVC: 2
61280-13: RNCC: 5 | RNVC: 2
790014077: RNCC: 5 | RNVC: 2
612800-13: RNCC: 5 | RNVC: 2

10 Jul 1990

5120-12-305-6149
Spanner Wrench

123056149
4W165-B: RNCC: 3 | RNVC: 2
4W165-B: RNCC: 5 | RNVC: 9
4W165B: RNCC: 5 | RNVC: 9

27 Nov 1985

5120-12-310-8772
Wuergezangenteil

123108772
1295: RNCC: 3 | RNVC: 2
S3-1295B: RNCC: 5 | RNVC: 2

3 Jul 1987

5120-12-170-9729
Montagevorrichtung

121709729
NO PRIMARY REF 12-170-9729: RNCC: 3 | RNVC: 2
242890: RNCC: 5 | RNVC: 2
242890: RNCC: 5 | RNVC: 9

26 Aug 1977

5120-12-386-5174
Mounting Punch

123865174
F6784940: RNCC: 3 | RNVC: 2

7 Sep 2011

5120-12-133-4692
Box Wrench

121334692
518589140800: RNCC: 3 | RNVC: 2
5185891408: RNCC: 5 | RNVC: 2
026M00100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-330-4728
Mechanical Puller Attachment

123304728
0852 0370.006: RNCC: 3 | RNVC: 2
8520370.006: RNCC: 5 | RNVC: 2

18 Dec 1992

5120-12-363-2369
Dreh Haltewerkzeug

123632369
F6457274: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-186-7317
Stemmer

121867317
99373001: RNCC: 3 | RNVC: 2
413400: RNCC: 5 | RNVC: 9
413400: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-196-4127
Face Spanner Wrench Socket

121964127
VRM604061-11-020: RNCC: 3 | RNVC: 2

5 Jul 1983

5120-12-317-8971
Socket Wrench Handle Bar

123178971
NO PRIMARY REF 12-317-8971: RNCC: 3 | RNVC: 2
26RS3: RNCC: 5 | RNVC: 9
621 951: RNCC: 5 | RNVC: 9

23 May 1989

5120-12-338-2580
Spanner Wrench

123382580
216-03-001: RNCC: 3 | RNVC: 2

12 Jun 1995

5120-12-387-1344
Mechanical Puller

123871344
80996016021: RNCC: 3 | RNVC: 2
80.99601-6021: RNCC: 5 | RNVC: 2

9 Nov 2011

5120-12-385-1755
Screwdriver Bit

123851755
26060: RNCC: 3 | RNVC: 2
2859-2,0: RNCC: 5 | RNVC: 1

6 May 2011

5120-12-365-3415
Socket Wrench

123653415
2300232-991000.030.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5120-12-308-6498
Socket Wrench

123086498
274071: RNCC: 3 | RNVC: 2
274071: RNCC: 3 | RNVC: 9
00274071.4.0: RNCC: 5 | RNVC: 2
00274071.4.0: RNCC: 5 | RNVC: 9

31 Oct 1986

5120-12-377-8104
Carrier Socket

123778104
2300306-994001.000.0: RNCC: 2 | RNVC: 2
2300306-994001.000.0: RNCC: 3 | RNVC: 2

12 Feb 2009

5120-12-171-6842
Mechanical Puller Attachment

121716842
220-1: RNCC: 3 | RNVC: 2
108137: RNCC: 5 | RNVC: 9
4520A: RNCC: 5 | RNVC: 9

3 Nov 1977

5120-12-362-6547
Drive Pin Punch Set

123626547
54.0084.960.78: RNCC: 3 | RNVC: 2
3646/6: RNCC: 5 | RNVC: 2

16 Mar 2004

5120-12-090-1853

5120-12-374-3553
Socket Wrench Handle

123743553
13071000-TCS: RNCC: 3 | RNVC: 2

11 Feb 2008

5120-12-176-6868
Montagewerkzeug

121766868
312589011500: RNCC: 3 | RNVC: 2

13 Dec 1978

5120-12-364-3447
Socket Wrench Adapter

123643447
11030002-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-161-8169

5120-12-700-7917
Socket Wrench

127007917
1393336128020321: RNCC: 2 | RNVC: 2

5 May 1993

5120-12-366-8559
Flat Tip Screwdriver

123668559
4725ESD 03: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-12-392-7522
Box Wrench

123927522
SEWZG024: RNCC: 3 | RNVC: 2

4 Jul 2013

5120-12-126-4687
Electronic Equipment Alignment Tool

121264687
NO PRIMARY REF 12-126-4687: RNCC: 3 | RNVC: 2
108707: RNCC: 5 | RNVC: 9
5520: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-316-7649
Open End Wrench

123167649
NO PRIMARY REF 12-316-7649: RNCC: 3 | RNVC: 2
1953-VDE-14: RNCC: 5 | RNVC: 9

9 Feb 1989

5120-12-196-1530
Einbauwerkz Spindel

121961530
VG95211-ML-121961530: RNCC: 2 | RNVC: 2
1.3-4350-407: RNCC: 3 | RNVC: 2
MAGERD 8694: RNCC: 5 | RNVC: 9

7 Jun 1983

5120-12-305-6606
Spanner Wrench

123056606
4W1015-B: RNCC: 3 | RNVC: 2
4W1015-B: RNCC: 5 | RNVC: 9
4W1015B: RNCC: 5 | RNVC: 9

2 Dec 1985

5120-12-305-2554
Socket Head Screw Key

123052554
YAWM1905: RNCC: 3 | RNVC: 2
70100012: RNCC: 3 | RNVC: 2
155-5-200: RNCC: 3 | RNVC: 2
334-5,0X200: RNCC: 3 | RNVC: 2
45021: RNCC: 3 | RNVC: 2
828-5: RNCC: 3 | RNVC: 2
009182: RNCC: 5 | RNVC: 2
4010995009182: RNCC: 5 | RNVC: 2
3932110005: RNCC: 5 | RNVC: 2

15 Oct 1985

5120-12-164-8074
Offset Screwdriver

121648074
NO PRIMARY REF 12-164-8074: RNCC: 3 | RNVC: 2
106078: RNCC: 5 | RNVC: 9
2049-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-343-7277
Socket Wrench

123437277
4328-8: RNCC: 3 | RNVC: 2
43280008: RNCC: 5 | RNVC: 2

17 Jul 1997

5120-12-178-3393
Hand Hammer

121783393
TL5120-0126-A3: RNCC: 2 | RNVC: 2
3008084: RNCC: 3 | RNVC: 2
3008081: RNCC: 5 | RNVC: 9
200815: RNCC: 5 | RNVC: 9
3008080: RNCC: 5 | RNVC: 9

12 Apr 1979

5120-12-123-5493
Socket Wrench

121235493
1945NBM12: RNCC: 3 | RNVC: 2
105339: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-391-7245
Screwdriver Bit Set And Handle

123917245
204SC995: RNCC: 3 | RNVC: 2

28 Mar 2013

5120-12-363-0361
Mechanical Puller Attachment

123630361
01TC35519: RNCC: 3 | RNVC: 2
01TC35519: RNCC: 5 | RNVC: 2

28 Apr 2004

5120-12-123-5965
Socket Wrench Ratchet Attachment

121235965
8951: RNCC: 3 | RNVC: 2
563: RNCC: 3 | RNVC: 2
15140000: RNCC: 5 | RNVC: 2
646300: RNCC: 5 | RNVC: 2
110678: RNCC: 5 | RNVC: 2
F30009802: RNCC: 5 | RNVC: 2
64630: RNCC: 5 | RNVC: 2
095M01200: RNCC: 5 | RNVC: 2
F3 0009802: RNCC: 5 | RNVC: 2
6463: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-090-5449

5120-12-314-2238
Pin Inserter

123142238
EPV1-030582: RNCC: 3 | RNVC: 2

17 Jun 1988

5120-12-146-0597
Spanner Wrench

121460597
23114-7112-00: RNCC: 2 | RNVC: 2
510167: RNCC: 5 | RNVC: 2
510167: RNCC: 5 | RNVC: 9
23114-7112-00: RNCC: 5 | RNVC: 9
510167: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-366-0456
Seal Inserter And Remover

123660456
80996060300: RNCC: 3 | RNVC: 2
80.99606-0300: RNCC: 5 | RNVC: 2

2 Mar 2005

5120-12-352-0573
Spanner Wrench

123520573
5100279: RNCC: 2 | RNVC: 2

11 Oct 2000

5120-12-381-2118
Cross Tip Screwdriver Set

123812118
668310-4: RNCC: 3 | RNVC: 2

21 Jan 2010

5120-12-044-4931

5120-12-373-4922
Socket Wrench Crowfoot Attachment

123734922
01211010: RNCC: 3 | RNVC: 2

8 Nov 2007

5120-12-375-8888
Pliers

123758888
3-462-2: RNCC: 3 | RNVC: 2

16 Jul 2008

5120-12-383-9970
Pliers

123839970
F30379021: RNCC: 3 | RNVC: 2

10 Jan 2011

5120-12-332-8445
An Montierwerkzeug

123328445
9108510163: RNCC: 3 | RNVC: 2

27 Sep 1993

5120-12-146-6809
Spanner Wrench

121466809
4015890607: RNCC: 3 | RNVC: 2
401589060700: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-306-8919
Seal Inserter

123068919
62099700: RNCC: 3 | RNVC: 2

15 Apr 1986

5120-12-318-2891
Mechanical Puller

123182891
116589243300: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-12-331-3173
Socket Wrench Adapter

123313173
70V5: RNCC: 3 | RNVC: 2
59010005: RNCC: 5 | RNVC: 2

21 Apr 1993

5120-12-390-4383
Mounting Lever

123904383
T80090309: RNCC: 3 | RNVC: 2

13 Nov 2012

5120-12-127-3963
Jaw Cable Grip

121273963
67031-514: RNCC: 3 | RNVC: 2
AKL10: RNCC: 5 | RNVC: 2
67031-508: RNCC: 5 | RNVC: 2
AKL10: RNCC: 5 | RNVC: 2
AKL803: RNCC: 5 | RNVC: 2
737457153: RNCC: 5 | RNVC: 9
AKL10737457153: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-303-9042
Socket Wrench Set

123039042
NO PRIMARY REF 12-303-9042: RNCC: 3 | RNVC: 2
50/20/7/512: RNCC: 5 | RNVC: 9

17 May 1985

5120-12-177-3635
Ausdruecker

121773635
713A095-65: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-390-1883
Installation And Re

123901883
F6552402: RNCC: 3 | RNVC: 2

12 Oct 2012

5120-12-362-3281
Socket Wrench Adapter

123623281
514M: RNCC: 3 | RNVC: 2
13030010: RNCC: 5 | RNVC: 2

6 Feb 2004

5120-12-044-4935

5120-12-378-6856
Seal Inserter

123786856
313675: RNCC: 3 | RNVC: 2
0854-03-14-00/37: RNCC: 5 | RNVC: 2

4 May 2009

5120-12-372-7594
Socket Wrench

123727594
11298903401: RNCC: 3 | RNVC: 2

17 Aug 2007

5120-12-345-4286
Torque Wrench Set

123454286
1602-201700.000.0: RNCC: 3 | RNVC: 2

12 Mar 1998

5120-12-150-3941
N Fuehrungseinsatz

121503941
1X46968222: RNCC: 3 | RNVC: 2
V96822-2: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-309-5574
Bearing And Bushing Inserter

123095574
604-45.12.151-19E: RNCC: 3 | RNVC: 2

4 Feb 1987

5120-12-318-0770
Flat Tip Screwdriver

123180770
73720-8X3-5X150: RNCC: 3 | RNVC: 9

8 Jun 1989

5120-12-130-8593
Socket Wrench Socket

121308593
A7805DZ-7/16: RNCC: 3 | RNVC: 2
109861: RNCC: 5 | RNVC: 9
180389: RNCC: 5 | RNVC: 9
7805DZ7-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-191-4639
Spanner Wrench

121914639
41-1180-2700.000.0: RNCC: 2 | RNVC: 2
41-1180-2700.000.0: RNCC: 3 | RNVC: 2
41-1180-2700.000.0: RNCC: 5 | RNVC: 2

4 Feb 1982

5120-12-142-0275
Abzieh Gleitstueck

121420275
562: RNCC: 3 | RNVC: 2
TS5120-0657-562: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-131-4189
Socket Wrench

121314189
83091527001: RNCC: 3 | RNVC: 2
75.84350-0985: RNCC: 5 | RNVC: 2
75843500985: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-364-2924
Socket Head Screw Key

123642924
47481060-TCS: RNCC: 3 | RNVC: 2

8 Sep 2004

5120-12-368-9342
Socket Wrench Socket

123689342
771-S60: RNCC: 3 | RNVC: 2
00.51.93.52: RNCC: 5 | RNVC: 2

8 May 2006

5120-12-317-6323
Socket Wrench Socket

123176323
7672798151: RNCC: 3 | RNVC: 2
7672 798 151: RNCC: 5 | RNVC: 9

25 Apr 1989

5120-12-360-0132
Electrical Contact Remover

123600132
VG95236T04CA002: RNCC: 2 | RNVC: 2

27 Mar 2003

5120-12-364-6795
Socket Wrench Socket

123646795
03010027-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-070-0091

5120-12-129-4505

5120-12-318-6033
Mechanical Puller Adapter

123186033
1024: RNCC: 3 | RNVC: 2
250-251/1024: RNCC: 5 | RNVC: 2
HZTL314005BLEG1024: RNCC: 5 | RNVC: 2
HZTL415050P1: RNCC: 5 | RNVC: 2

31 Jul 1989

5120-12-358-7704
Socket Wrench Crowfoot Attachment

123587704
J0433782D311-000A1-003: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-129-9521
Open End Wrench

121299521
23114-6904-01: RNCC: 2 | RNVC: 2
6858: RNCC: 3 | RNVC: 2
685B: RNCC: 3 | RNVC: 2
R3821: RNCC: 3 | RNVC: 2
23114-6904-01: RNCC: 5 | RNVC: 2
R3821: RNCC: 5 | RNVC: 9
23114-6904-01: RNCC: 5 | RNVC: 9
23114-6904-01: RNCC: 5 | RNVC: 9
23114-6904-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-379-7323
Valve Tappet Adjusting Tool

123797323
05725080: RNCC: 3 | RNVC: 2

27 Aug 2009

5120-12-313-5326
Stud Remover

123135326
2300223-264070.00.0: RNCC: 2 | RNVC: 2
2300223-264070.00.0: RNCC: 3 | RNVC: 2

13 Apr 1988

5120-12-375-6909
Screwdriver Bit

123756909
1802526: RNCC: 3 | RNVC: 2
2141 PH 2: RNCC: 5 | RNVC: 2
2141 PH 2: RNCC: 5 | RNVC: 2
1802526: RNCC: 5 | RNVC: 2

25 Jun 2008

5120-12-374-7975
Socket Wrench Socket

123747975
4680-4: RNCC: 3 | RNVC: 2

25 Mar 2008

5120-12-023-2486

5120-12-130-6236
Spanner Wrench

121306236
WZ49: RNCC: 3 | RNVC: 2
0141856: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-351-3904
Spanner Wrench

123513904
12851012: RNCC: 3 | RNVC: 2

20 Jul 2000

5120-12-303-8497
Mechanical Puller

123038497
3B33-7-3: RNCC: 3 | RNVC: 2

8 May 1985

5120-12-152-7354
Swivel Knob Jeweler's Screwdriver

121527354
2025/0-0,25X1,2: RNCC: 3 | RNVC: 2
190-012: RNCC: 5 | RNVC: 9
B0,2X1,2DIN8320: RNCC: 5 | RNVC: 9
B0-25X1-4DIN8320: RNCC: 5 | RNVC: 9
B0-2X1-2DIN8320: RNCC: 5 | RNVC: 9
BO,2X1,2DIN8320: RNCC: 5 | RNVC: 9
BO-2X1-2DIN8320: RNCC: 5 | RNVC: 9
DIN8320-B0,25X1,2: RNCC: 5 | RNVC: 9
DIN8320-B0,2X1,2: RNCC: 5 | RNVC: 9
DIN8320B0,2X1,2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-6545
Pliers

121766545
2623200: RNCC: 3 | RNVC: 2
2456B: RNCC: 3 | RNVC: 2
2623: RNCC: 5 | RNVC: 2
106315: RNCC: 5 | RNVC: 2
1393227116774019: RNCC: 5 | RNVC: 9
0808393477459: RNCC: 5 | RNVC: 9
DIN5236-B200: RNCC: 5 | RNVC: 9
TGL 48-72421,200,OB 019: RNCC: 5 | RNVC: 9

11 Dec 1978

5120-12-172-0901
Pliers

121720901
70150-1040-0-000-05: RNCC: 3 | RNVC: 2

19 Dec 1977

5120-12-348-6477
Torque Wrench Adapter

123486477
8791-19: RNCC: 3 | RNVC: 2

29 Jul 1999

5120-12-190-0008
Torque Wrench

121900008
26-21C1449P011F: RNCC: 3 | RNVC: 2

2 Nov 1981

5120-12-334-8380
Seal Inserter

123348380
70001-T605: RNCC: 3 | RNVC: 2

27 Jun 1994

5120-12-342-9817
Socket Head Screw Key

123429817
54.0070.812.03: RNCC: 3 | RNVC: 2

21 Apr 1997

5120-12-140-1204
Spanner Wrench

121401204
U01236: RNCC: 3 | RNVC: 2
U1236: RNCC: 5 | RNVC: 2
U1236: RNCC: 5 | RNVC: 9
U01236: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-4802

5120-12-384-0885
Pedal Adjustment Tool Compressor

123840885
P-0334-200: RNCC: 3 | RNVC: 2
P-0334-200: RNCC: 5 | RNVC: 2

20 Jan 2011

5120-12-358-1999
Torque Wrench

123581999
IZO-I-30: RNCC: 3 | RNVC: 2
M4201912: RNCC: 5 | RNVC: 2

25 Sep 2002

5120-12-190-9519
Torque Wrench

121909519
0003-0590-000: RNCC: 3 | RNVC: 2
0003-0590-000: RNCC: 5 | RNVC: 9

28 Dec 1981

5120-12-382-2540
Torque Wrench

123822540
730N/2: RNCC: 3 | RNVC: 2
50181002: RNCC: 5 | RNVC: 2

27 May 2010

5120-12-373-2832
Torque Wrench Adapter

123732832
447-7: RNCC: 3 | RNVC: 2
02181007: RNCC: 5 | RNVC: 2

17 Oct 2007

5120-12-313-5551
Mechanical Puller Attachment

123135551
80996060255: RNCC: 3 | RNVC: 2
80.99606.0255: RNCC: 5 | RNVC: 2

15 Apr 1988

5120-12-132-0178

5120-12-133-6397

5120-12-196-7377
Aufdrueckwerkzeug

121967377
343589004300: RNCC: 3 | RNVC: 2
1X56045808: RNCC: 3 | RNVC: 2
1X56045808: RNCC: 5 | RNVC: 2
0535401: RNCC: 5 | RNVC: 2
343 589 00 43 00: RNCC: 5 | RNVC: 2
535401: RNCC: 5 | RNVC: 9

9 Aug 1983

5120-12-316-1010
Socket Wrench Screwdriver Attachment

123161010
140306: RNCC: 3 | RNVC: 2

22 Dec 1988

5120-12-090-1455

5120-12-091-2901

5120-12-700-3864
Flat Tip Screwdriver

127003864
51-083044010: RNCC: 2 | RNVC: 2

23 Apr 1992

5120-12-381-2912
Torque Wrench

123812912
657235-280: RNCC: 3 | RNVC: 2

29 Jan 2010

5120-12-144-6097
Socket Wrench

121446097
3910-12000-010: RNCC: 3 | RNVC: 2
VW126B: RNCC: 5 | RNVC: 2
VW126B: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-388-6172
Socket Wrench Socket

123886172
880LG-10: RNCC: 3 | RNVC: 2
4000896040698: RNCC: 5 | RNVC: 2

4 Apr 2012

5120-12-349-3924
Montierdorn

123493924
2300211-990600.007.0: RNCC: 2 | RNVC: 2
2300211-990600.007.0: RNCC: 3 | RNVC: 2

9 Nov 1999

5120-12-133-4545

5120-12-131-2898
Ausbauvorrichtung

121312898
639: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-322-3503
Socket Wrench

123223503
1945NB-M9: RNCC: 3 | RNVC: 2
105336: RNCC: 5 | RNVC: 2

14 Aug 1990

5120-12-041-5946

5120-12-337-4830
Socket Wrench

123374830
375-E7: RNCC: 3 | RNVC: 2

9 Mar 1995

5120-12-133-3641
Open End Wrench

121333641
NO PRIMARY REF 12-133-3641: RNCC: 3 | RNVC: 2
105833: RNCC: 5 | RNVC: 9
1953Z19-32X11-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-166-7735
Pliers

121667735
30-79350-0120: RNCC: 3 | RNVC: 2

21 Oct 1976

5120-12-311-0651
Hyd Ausbauwerkzeug

123110651
5187028: RNCC: 3 | RNVC: 2

22 Jul 1987

5120-12-133-7074

5120-12-168-3690
Montagewerkzeug

121683690
2360-264300.01.0: RNCC: 2 | RNVC: 2
90600750000000: RNCC: 3 | RNVC: 2
2360-264300.01.0: RNCC: 3 | RNVC: 2
2360-264300-01-0: RNCC: 5 | RNVC: 2
906075: RNCC: 5 | RNVC: 2
2360-264300-01-0: RNCC: 5 | RNVC: 2
2360-264300.01.0: RNCC: 5 | RNVC: 2
2360-264300-01-0: RNCC: 5 | RNVC: 9
2360-264300.01.0: RNCC: 5 | RNVC: 9

10 Mar 1977

5120-12-389-0021
Mechanical Puller Attachment

123890021
80996040464: RNCC: 3 | RNVC: 2
80.99604-0464: RNCC: 5 | RNVC: 2

15 May 2012

5120-12-133-3970
Screwdriver Bit

121333970
185-4X: RNCC: 3 | RNVC: 2
114455: RNCC: 5 | RNVC: 2
55Z114455: RNCC: 5 | RNVC: 2
55Z3/16: RNCC: 5 | RNVC: 2
55Z3-16: RNCC: 5 | RNVC: 9
6990Z3-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-154-2561
Spanner Wrench

121542561
5191154-230: RNCC: 2 | RNVC: 2
5191154-230: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-9524
Justier Stift

121559524
NM380-02: RNCC: 3 | RNVC: 2
NM380-02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-315-4875
Combination Box And Open End Wrench

123154875
NO PRIMARY REF 12-315-4875: RNCC: 3 | RNVC: 2
1505110030: RNCC: 5 | RNVC: 9
603-32: RNCC: 5 | RNVC: 9

29 Oct 1988

5120-12-123-5565
Socket Wrench

121235565
DIN659-41: RNCC: 2 | RNVC: 2
41DIN659: RNCC: 3 | RNVC: 2
41DIN659: RNCC: 5 | RNVC: 2
E8103: RNCC: 5 | RNVC: 9
E8103: RNCC: 5 | RNVC: 9
5168K41: RNCC: 5 | RNVC: 9
41DIN659GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-313-6541
Spanner Wrench

123136541
10739001: RNCC: 2 | RNVC: 2
5346701: RNCC: 3 | RNVC: 2
10739001: RNCC: 5 | RNVC: 2
27129W3: RNCC: 5 | RNVC: 2

22 Apr 1988

5120-12-384-3290
Mounting Punch

123843290
F30378878: RNCC: 3 | RNVC: 2

14 Feb 2011

5120-12-195-0263
Mechanical Puller

121950263
1X56136335: RNCC: 3 | RNVC: 2

3 Jan 1983

5120-12-316-6426
Mechanical Puller

123166426
115589073300: RNCC: 3 | RNVC: 2
115589073300K: RNCC: 5 | RNVC: 2

30 Jan 1989

5120-12-391-4549
Drive Pin Punch

123914549
957308: RNCC: 3 | RNVC: 2

13 Mar 2013

5120-12-305-4889
Seal Inserter

123054889
352589071500: RNCC: 3 | RNVC: 2

13 Nov 1985

5120-12-123-4846

5120-12-170-9628
Drive Pin Punch

121709628
3644-180: RNCC: 3 | RNVC: 2
107479: RNCC: 5 | RNVC: 2
D6DIN6458: RNCC: 5 | RNVC: 9

24 Aug 1977

5120-12-317-5033
Lamp Extractor

123175033
06762007: RNCC: 3 | RNVC: 9

13 Apr 1989

5120-12-365-9439
Electronic Equipment Alignment Tool

123659439
T4856: RNCC: 3 | RNVC: 2

21 Feb 2005

5120-12-121-6431

5120-12-131-4982

5120-12-340-4519
Piston Ring Expander

123404519
1706-3: RNCC: 3 | RNVC: 2
01706015055: RNCC: 5 | RNVC: 2

17 Apr 1996

5120-12-123-5622
Socket Wrench

121235622
NO PRIMARY REF 12-123-5622: RNCC: 3 | RNVC: 2
000589160905: RNCC: 5 | RNVC: 2
070060: RNCC: 5 | RNVC: 9
430-14X17: RNCC: 5 | RNVC: 9
70-14X17: RNCC: 5 | RNVC: 9
213322: RNCC: 5 | RNVC: 9
27-14X17: RNCC: 5 | RNVC: 9
27-14X17: RNCC: 5 | RNVC: 9
01350: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-169-8501
Spanner Wrench

121698501
0736-001-1722-000: RNCC: 3 | RNVC: 2

13 Jun 1977

5120-12-360-1924
Bearing And Bushing Inserter

123601924
80996040053: RNCC: 3 | RNVC: 2
80.99604-0053: RNCC: 5 | RNVC: 2

15 Apr 2003

5120-12-186-7626
Socket Head Screw Key

121867626
DIN911-14L: RNCC: 2 | RNVC: 2
42994: RNCC: 3 | RNVC: 2
2100LG-14: RNCC: 3 | RNVC: 2
4400069: RNCC: 3 | RNVC: 2
4299: RNCC: 5 | RNVC: 2
3933110032: RNCC: 5 | RNVC: 2
14LDIN911: RNCC: 5 | RNVC: 2
DIN 911-14L: RNCC: 5 | RNVC: 2

2 Feb 1981

5120-12-368-8099
Slip Joint Pliers

123688099
8224 IP: RNCC: 3 | RNVC: 2
00.13.19.58: RNCC: 5 | RNVC: 2

24 Apr 2006

5120-12-147-1986
Open End Wrench

121471986
NM283-12: RNCC: 3 | RNVC: 2
NM283-12: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-150-6088
Heckrotorgetriebe

121506088
803-60218: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-351-4238
Spanner Wrench

123514238
0986611696: RNCC: 3 | RNVC: 2

25 Jul 2000

5120-12-183-7384
Griff

121837384
1000042-191200.03: RNCC: 3 | RNVC: 2
1000042-191200-03: RNCC: 5 | RNVC: 2

15 May 1980

5120-12-307-3845
Montierhuelse

123073845
M514047-42: RNCC: 3 | RNVC: 2

11 Jun 1986

5120-12-189-9725
Bearing And Bushing Inserter

121899725
NO PRIMARY REF 12-189-9725: RNCC: 3 | RNVC: 2
416130: RNCC: 5 | RNVC: 9
416130: RNCC: 5 | RNVC: 9

29 Oct 1981

5120-12-305-8320
Richt- Platte

123058320
57195050: RNCC: 3 | RNVC: 9

19 Dec 1985

5120-12-041-5747

5120-12-349-4039
Eindrueckwerkzeug

123494039
0986617185: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-310-5393
Seal Inserter

123105393
80.99614.0033: RNCC: 3 | RNVC: 2

29 May 1987

5120-12-391-2235
Mounting Lever

123912235
5300.720.010.000: RNCC: 3 | RNVC: 2

26 Feb 2013

5120-12-191-4111
Socket Wrench

121914111
D-03.364.27.01.0: RNCC: 3 | RNVC: 2

1 Feb 1982

5120-12-374-4036
Screwdriver Handle

123744036
220589019950: RNCC: 3 | RNVC: 2
4-38665: RNCC: 5 | RNVC: 2

14 Feb 2008

5120-12-121-4810
Socket Wrench

121214810
DIN896-A14X17: RNCC: 2 | RNVC: 2
A14X17DIN896: RNCC: 5 | RNVC: 2
26-14X17: RNCC: 5 | RNVC: 9
A14X17DIN896GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-3607
Schluessel

121333607
184-181: RNCC: 3 | RNVC: 2
S533E9: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-321-9872
Socket Wrench Extension

123219872
790520177: RNCC: 3 | RNVC: 2
3201-750.06.00.057-000: RNCC: 5 | RNVC: 2

16 Jul 1990

5120-12-190-9200
Spanner Wrench

121909200
0003-3002-000: RNCC: 3 | RNVC: 2
0003-3002-000: RNCC: 5 | RNVC: 9

22 Dec 1981

5120-12-147-3363
Schluessel

121473363
335918-8010.000: RNCC: 3 | RNVC: 2
510185-010: RNCC: 5 | RNVC: 2
12706-3100: RNCC: 5 | RNVC: 2
335918-8010.000: RNCC: 5 | RNVC: 9
12706-3100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-7761

5120-12-137-2784
Socket Wrench

121372784
DIN22417-A-M12: RNCC: 2 | RNVC: 2
DIN22417-M12: RNCC: 5 | RNVC: 9
M12DIN22417: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-0696
Torque Wrench

123880696
7097270: RNCC: 3 | RNVC: 2
8251569269: RNCC: 5 | RNVC: 2
4002805441015: RNCC: 5 | RNVC: 2
4410-01: RNCC: 5 | RNVC: 2
7097270: RNCC: 5 | RNVC: 2
4002805441015: RNCC: 5 | RNVC: 2
4410-01: RNCC: 5 | RNVC: 2

22 Feb 2012

5120-12-337-1930
Bearing And Bushing Remover

123371930
11.49025-0117: RNCC: 3 | RNVC: 2
114.017: RNCC: 5 | RNVC: 2
11.49025-0117: RNCC: 5 | RNVC: 9
114.017: RNCC: 5 | RNVC: 9

31 Jan 1995

5120-12-171-2143
Montagewerkzeug

121712143
1X56 136 471: RNCC: 3 | RNVC: 2
81.66850-0015: RNCC: 5 | RNVC: 2
81668500015: RNCC: 5 | RNVC: 2
909122602: RNCC: 5 | RNVC: 2
0535928: RNCC: 5 | RNVC: 2
0730256: RNCC: 5 | RNVC: 2
1X56136471: RNCC: 5 | RNVC: 9
90 912 2602: RNCC: 5 | RNVC: 9
535928: RNCC: 5 | RNVC: 9

19 Sep 1977

5120-12-121-5370
Hand Rivet Set

121215370
NO PRIMARY REF 12-121-5370: RNCC: 3 | RNVC: 2
244E10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1863
Reiniger

121261863
NO PRIMARY REF 12-126-1863: RNCC: 3 | RNVC: 2
2495: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-346-9207
Socket Wrench

123469207
05005305001: RNCC: 3 | RNVC: 2
9803-06: RNCC: 3 | RNVC: 2
190I-6VDE: RNCC: 5 | RNVC: 2
005305: RNCC: 5 | RNVC: 9

28 Sep 1998

5120-12-320-8402
Vise Jaw Caps

123208402
10884: RNCC: 3 | RNVC: 2
10884: RNCC: 5 | RNVC: 9

21 Feb 1990

5120-12-181-6876
Abziehvorrichtung

121816876
VW203B: RNCC: 3 | RNVC: 9

10 Dec 1979

5120-12-308-2252
Box Wrench Set

123082252
0853 1631: RNCC: 3 | RNVC: 2
8531631: RNCC: 5 | RNVC: 2
MAGERD 1162: RNCC: 5 | RNVC: 9

16 Sep 1986

5120-12-367-5538
Rohrbieger Dorn

123675538
5390012: RNCC: 3 | RNVC: 2

1 Sep 2005

5120-12-123-5228
Box Wrench

121235228
DIN837-A14X17: RNCC: 2 | RNVC: 2
A14X17DIN837: RNCC: 5 | RNVC: 2
22-14X17: RNCC: 5 | RNVC: 9
41061417: RNCC: 5 | RNVC: 9
A14X17DIN837GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-9369
Elektron Auszieher

123649369
2-620: RNCC: 3 | RNVC: 2
T2371: RNCC: 3 | RNVC: 2

17 Nov 2004

5120-12-139-2472
M Montage- Platte

121392472
009M01300: RNCC: 3 | RNVC: 2
VM55577: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-381-0588
Abstimmwerkzeugsatz

123810588
1-150: RNCC: 3 | RNVC: 2

6 Jan 2010

5120-12-301-6053
Spanner Wrench

123016053
3 W 1826-A: RNCC: 3 | RNVC: 2
3 W 1826-A: RNCC: 5 | RNVC: 9

26 Oct 1984

5120-12-318-2042
Ratchet Wrench

123182042
R4-4-STK24: RNCC: 3 | RNVC: 2

20 Jun 1989

5120-12-191-3587
Montagevorrichtung

121913587
HVM: RNCC: 3 | RNVC: 2
C 5791 506: RNCC: 5 | RNVC: 2
C 5791 506: RNCC: 5 | RNVC: 2
C5791506: RNCC: 5 | RNVC: 2
C5791506: RNCC: 5 | RNVC: 9

26 Jan 1982

5120-12-123-5488
Socket Wrench

121235488
DIN3125-3: RNCC: 2 | RNVC: 2
4510001: RNCC: 3 | RNVC: 2
342-3X125: RNCC: 3 | RNVC: 2
52164030: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-336-4035
Socket Head Screw Key

123364035
NM290-62: RNCC: 3 | RNVC: 2
NM290-62: RNCC: 5 | RNVC: 9

11 Nov 1994

5120-12-140-9571
Schluessel

121409571
RP516-71: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-172-9126
Bearing And Bushing Inserter

121729126
VG95211-ML-121729126: RNCC: 2 | RNVC: 2
1X56 136 666: RNCC: 3 | RNVC: 2
1X56136666: RNCC: 5 | RNVC: 9

2 Mar 1978

5120-12-177-1825
Ratchet Wrench

121771825
2360-261002.00.0: RNCC: 1 | RNVC: 2
045/0.09.94-2: RNCC: 3 | RNVC: 2
2360-261002.00.0: RNCC: 5 | RNVC: 2
2360-261002-00-0: RNCC: 5 | RNVC: 2
2360-261002.00.0: RNCC: 5 | RNVC: 2
2360-261002-00-0: RNCC: 5 | RNVC: 2
5120700034: RNCC: 5 | RNVC: 2
2360-261002.00.0: RNCC: 5 | RNVC: 2
2360-261002-00-0: RNCC: 5 | RNVC: 9
2360-261002.00.0: RNCC: 5 | RNVC: 9

17 Jan 1979

5120-12-148-2952
Pipe Wrench

121482952
2360-261166.00.0: RNCC: 2 | RNVC: 2
2360-261166.00.0: RNCC: 3 | RNVC: 2
2360-261166.00.0: RNCC: 5 | RNVC: 2
2360-261166-00-0: RNCC: 5 | RNVC: 2
2360-261166-00-0: RNCC: 5 | RNVC: 2
2360-261166-00-0: RNCC: 5 | RNVC: 9
2360-261166.00.0: RNCC: 5 | RNVC: 9
121482952: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-188-3961
Socket Wrench Handle

121883961
2300109-990830.000.0: RNCC: 2 | RNVC: 2
91320883: RNCC: 3 | RNVC: 2
2300109-990830.000.0: RNCC: 3 | RNVC: 2
2300109-990830.000.0: RNCC: 3 | RNVC: 2
5120700043: RNCC: 5 | RNVC: 2
2300109-990830-000-0: RNCC: 5 | RNVC: 2
2300109-990830-000-0: RNCC: 5 | RNVC: 2
2300109-990830-000-0: RNCC: 5 | RNVC: 9
2300109-990830.000.0: RNCC: 5 | RNVC: 9

6 Jul 1981

5120-12-194-4120
Socket Wrench Screwdriver Attachment

121944120
TL5120-0102-110: RNCC: 2 | RNVC: 2
071512708: RNCC: 3 | RNVC: 2
2051-8: RNCC: 3 | RNVC: 2
49-8: RNCC: 3 | RNVC: 2
DIN7422-8-10: RNCC: 5 | RNVC: 1
63750-8: RNCC: 5 | RNVC: 2
637600-8: RNCC: 5 | RNVC: 2
02050008: RNCC: 5 | RNVC: 2
49 8: RNCC: 5 | RNVC: 9

3 Nov 1982

5120-12-133-3768
Socket Wrench Crowfoot Attachment

121333768
540A1 7-8: RNCC: 3 | RNVC: 2
FC56: RNCC: 3 | RNVC: 2
02500070: RNCC: 5 | RNVC: 2
AN8506-24: RNCC: 5 | RNVC: 9
FC56: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-306-5020
Socket Head Screw Key

123065020
2730512801: RNCC: 3 | RNVC: 2
2730-5128-01: RNCC: 5 | RNVC: 2

5 Mar 1986

5120-12-173-4337
Spanner Wrench

121734337
532008U17W1: RNCC: 3 | RNVC: 2
532008U17W1: RNCC: 5 | RNVC: 2
532008U17W1: RNCC: 5 | RNVC: 9
532008U17W1: RNCC: 5 | RNVC: 9

14 Apr 1978

5120-12-159-1186
Durchdrehvorrichtun

121591186
837589216100: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-364-8271
Leveling-Support Jack

123648271
203236: RNCC: 3 | RNVC: 2

5 Nov 2004

5120-12-041-2690

5120-12-185-8452
Flat Tip Screwdriver

121858452
C407-A32-B4: RNCC: 3 | RNVC: 2
C407A32B4: RNCC: 5 | RNVC: 2
C 5721 996: RNCC: 5 | RNVC: 2
C 5721 996: RNCC: 5 | RNVC: 2

1 Nov 1980

5120-12-300-9112
Gl Montierwerkzeug

123009112
72130405: RNCC: 3 | RNVC: 2
7-213-0405: RNCC: 5 | RNVC: 2

11 Sep 1984

5120-12-313-4424
Drive Pin Punch Set

123134424
271K: RNCC: 3 | RNVC: 2
3734S/6: RNCC: 3 | RNVC: 2
349: RNCC: 3 | RNVC: 2
1834470: RNCC: 5 | RNVC: 2
271-K: RNCC: 5 | RNVC: 2
648973: RNCC: 5 | RNVC: 2

31 Mar 1988

5120-12-176-4284
Socket Wrench

121764284
52172090: RNCC: 3 | RNVC: 9
571D120-9: RNCC: 3 | RNVC: 9

27 Nov 1978

5120-12-174-2341
Electronic Equipment Alignment Tool

121742341
1-175: RNCC: 3 | RNVC: 9

15 Jun 1978

5120-12-356-4095
Pedal Adjustment Tool Compressor

123564095
218830: RNCC: 3 | RNVC: 2
LABTS-00-106000: RNCC: 5 | RNVC: 2

26 Feb 2002

5120-12-175-3469
Entriegelungshebel

121753469
1400003-13044-00: RNCC: 3 | RNVC: 2

11 Sep 1978

5120-12-156-1661
Retaining Ring Pliers

121561661
CH1772-13FE: RNCC: 3 | RNVC: 2
CH1772-13FE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-144-3545
Socket Wrench Screwdriver Attachment

121443545
986A-3/8: RNCC: 3 | RNVC: 2
54A3-8: RNCC: 3 | RNVC: 2
IN19-3-8: RNCC: 3 | RNVC: 2
03450024: RNCC: 5 | RNVC: 2
TVA5120-2-263-037-1.1.46: RNCC: 5 | RNVC: 2
TVA5120-2-263-038-1.1.6: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-341-1523
Lamp Extractor

123411523
MGG 20109-01: RNCC: 3 | RNVC: 2

1 Aug 1996

5120-12-168-5271
Montagevorrichtung

121685271
2776007001: RNCC: 3 | RNVC: 2

18 Mar 1977

5120-12-375-6907
Screwdriver Bit

123756907
1802496: RNCC: 3 | RNVC: 2
2141 PH 0: RNCC: 5 | RNVC: 2
1802496: RNCC: 5 | RNVC: 2
2141 PH 0: RNCC: 5 | RNVC: 2

25 Jun 2008

5120-12-314-8295
Torque Wrench Adapter

123148295
731A/40-1 1/8: RNCC: 3 | RNVC: 2
731A/40-1.125: RNCC: 5 | RNVC: 2

13 Aug 1988

5120-12-305-8427
Lifting Pneumatic Bag

123058427
1310 0012 00: RNCC: 3 | RNVC: 2
1310001200: RNCC: 5 | RNVC: 2
TYP V24: RNCC: 5 | RNVC: 2
131 04 000: RNCC: 5 | RNVC: 9
13104000: RNCC: 5 | RNVC: 9

23 Dec 1985

5120-12-183-9522
Spanner Wrench

121839522
4-73052: RNCC: 3 | RNVC: 2

3 Jun 1980

5120-12-179-8587
Justiervorrichtung

121798587
0888-048-01-6: RNCC: 3 | RNVC: 2

3 Aug 1979

5120-12-358-6273
Socket Head Screw Key

123586273
930100: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-12-176-7721
Saddler's Pegging Awl Blade

121767721
6890-1-100: RNCC: 3 | RNVC: 9

18 Dec 1978

5120-12-309-8127
Zentrier- Ring

123098127
4.124-Z3: RNCC: 3 | RNVC: 9
4.124-Z3/DN100: RNCC: 5 | RNVC: 9

5 Mar 1987

5120-12-195-6841
Combination Box And Open End Wrench

121956841
NO PRIMARY REF 12-195-6841: RNCC: 3 | RNVC: 2
1952E-3/4: RNCC: 5 | RNVC: 9

28 Mar 1983

5120-12-152-0712
Dorn

121520712
23111-7199.06: RNCC: 2 | RNVC: 2
23111-7199.06: RNCC: 3 | RNVC: 2
23111-7199-06: RNCC: 5 | RNVC: 9
23111-7199.06: RNCC: 5 | RNVC: 9
23111-7199-06: RNCC: 5 | RNVC: 9
23111-7199-06: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-2141
Pipe Wrench

121272141
431BECU38-350: RNCC: 3 | RNVC: 2
431BECU38-350: RNCC: 3 | RNVC: 9
282-350: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-132-1657
Socket Wrench

121321657
075125: RNCC: 3 | RNVC: 2
25-41: RNCC: 3 | RNVC: 2
75-41: RNCC: 5 | RNVC: 9
211656: RNCC: 5 | RNVC: 9
25-41: RNCC: 5 | RNVC: 9
25-41: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-9508
Socket Wrench Socket

121559508
NM291-055: RNCC: 3 | RNVC: 2
NM291-055: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-327-7046
Bearing And Bushing Inserter And Remover

123277046
2300013-7125.00: RNCC: 2 | RNVC: 2
9875967: RNCC: 3 | RNVC: 2
9875967: RNCC: 5 | RNVC: 2
2300013-7125.00: RNCC: 5 | RNVC: 9
9875967: RNCC: 5 | RNVC: 9

20 Feb 1992

5120-12-390-6415
Cross Tip Screwdriver

123906415
159.1028: RNCC: 3 | RNVC: 2

29 Nov 2012

5120-12-185-5889
Socket Wrench Set

121855889
7819DRN: RNCC: 3 | RNVC: 2
D19TMZ: RNCC: 3 | RNVC: 2
900Z: RNCC: 3 | RNVC: 2
1831547: RNCC: 5 | RNVC: 2
4487350042: RNCC: 5 | RNVC: 2
614831: RNCC: 5 | RNVC: 2

16 Oct 1980

5120-12-132-7774
Socket Wrench Handle Bar

121327774
B153: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-388-1969
Socket Wrench Set

123881969
6172450: RNCC: 3 | RNVC: 2
20 EAU-3: RNCC: 5 | RNVC: 2
6172450: RNCC: 5 | RNVC: 2
20 EAU-3: RNCC: 5 | RNVC: 2

1 Mar 2012

5120-12-331-6686
Fuehrungs- Platte

123316686
1000173-992011.000.0: RNCC: 2 | RNVC: 2
1000173-992011.000.0: RNCC: 3 | RNVC: 2

7 Jun 1993

5120-12-379-6786
Gas- Loetlampe

123796786
3.5930: RNCC: 3 | RNVC: 2
3.5930: RNCC: 5 | RNVC: 2
392221180001: RNCC: 6 | RNVC: 9
51120: RNCC: 6 | RNVC: 9

21 Aug 2009

5120-12-365-2918
L Verstemmwerkzeug

123652918
8090 798 655: RNCC: 3 | RNVC: 2

16 Dec 2004

5120-12-360-8743
Mechanical Puller Attachment

123608743
0854 1936.003: RNCC: 3 | RNVC: 2

18 Jul 2003

5120-12-129-8193

5120-12-126-1361
Solid Center Punch

121261361
VG95211-ML-121261361: RNCC: 2 | RNVC: 2
3639E: RNCC: 3 | RNVC: 2
749200-90: RNCC: 3 | RNVC: 2
107447: RNCC: 5 | RNVC: 2
7492-90: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-355-4492
Electrical Contact Inserter

123554492
TW2100-40: RNCC: 3 | RNVC: 2

15 Nov 2001

5120-12-137-1009
Hand Hammer

121371009
TL5120-0099: RNCC: 2 | RNVC: 2
235-10MST: RNCC: 5 | RNVC: 9
A10SDIN1042: RNCC: 5 | RNVC: 9
DIN1042S-A10: RNCC: 5 | RNVC: 9
5120-70302: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-140-5641
Socket Head Screw Key

121405641
DIN905-8: RNCC: 2 | RNVC: 2
3015/8: RNCC: 3 | RNVC: 2
8DIN905: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-384-3106
Pliers

123843106
F30378037: RNCC: 3 | RNVC: 2

11 Feb 2011

5120-12-185-6466
Hand Screw Starter

121856466
4-408: RNCC: 3 | RNVC: 2

21 Oct 1980

5120-12-362-6202
Mechanical Puller Attachment

123626202
2500261-993260.002.0: RNCC: 2 | RNVC: 2
2500261-993260.002.0: RNCC: 3 | RNVC: 2

12 Mar 2004

5120-12-368-7109
Socket Wrench Socket

123687109
771-L 5: RNCC: 3 | RNVC: 2
00.48.48.95: RNCC: 5 | RNVC: 2

10 Apr 2006

5120-12-358-7512
Fixed Open End Wrench Set

123587512
14899.5: RNCC: 3 | RNVC: 2

11 Nov 2002

5120-12-181-1569
Screwdriver Bit

121811569
1090-4: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-132-2721
Combination Open End And Spanner Wrench

121322721
499204-3228: RNCC: 2 | RNVC: 2
499204-3228: RNCC: 3 | RNVC: 2
T481: RNCC: 3 | RNVC: 9
499204-3228: RNCC: 5 | RNVC: 2
499204-3228: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-313-2989
Bearing And Bushing Inserter

123132989
A10-34-186-00-0W31.01: RNCC: 3 | RNVC: 2
A10-34-186-000W31-01: RNCC: 5 | RNVC: 2
85-801-2016: RNCC: 6 | RNVC: 9

18 Mar 1988

5120-12-150-6249
Mechanical Puller Step Plate

121506249
23176-264260-04-0: RNCC: 2 | RNVC: 2
23176-264260.04.0: RNCC: 2 | RNVC: 2
23176-264260.04.0: RNCC: 5 | RNVC: 2
23176-264260-04-0: RNCC: 5 | RNVC: 2
23176-264260-04-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-311-0350
Oelfilt Schluessel

123110350
62030701: RNCC: 3 | RNVC: 2
6.11.083: RNCC: 5 | RNVC: 9
6.11.083.00: RNCC: 5 | RNVC: 9

21 Jul 1987

5120-12-157-2117
N Untersatz- Platte

121572117
14018903200: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-313-6253
Socket Wrench Screwdriver Attachment

123136253
NO PRIMARY REF 12-313-6253: RNCC: 3 | RNVC: 2
7409LM5MM: RNCC: 5 | RNVC: 9
176095: RNCC: 5 | RNVC: 9

21 Apr 1988

5120-12-325-5962
Hand Hammer

123255962
146 500: RNCC: 3 | RNVC: 2
146500: RNCC: 5 | RNVC: 2

20 Jun 1991

5120-12-363-2186
Mechanical Puller

123632186
F0099526: RNCC: 3 | RNVC: 2

13 May 2004

5120-12-375-2815
Flat Tip And Cross Tip Screwdriver Set

123752815
65-980: RNCC: 3 | RNVC: 2
65-980: RNCC: 5 | RNVC: 2

14 May 2008

5120-12-303-5615
Hand Terminal Crimping Tool

123035615
09990000075: RNCC: 3 | RNVC: 2

4 Apr 1985

5120-12-129-1377

5120-12-320-9365
Craftsman's Tweezers

123209365
71761-AM: RNCC: 3 | RNVC: 2
727510-AM: RNCC: 3 | RNVC: 2
250A-10-1004: RNCC: 5 | RNVC: 2
250A-10-1004: RNCC: 5 | RNVC: 9
71761-AM: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-12-381-9861
Kolbenst Auszieher

123819861
26.8454-88-30-00.00-00: RNCC: 3 | RNVC: 2
1210881: RNCC: 5 | RNVC: 2

23 Apr 2010

5120-12-338-2609
Dreh Haltewerkzeug

123382609
2.72-34795: RNCC: 3 | RNVC: 2

13 Jun 1995

5120-12-338-1398
Spanner Wrench

123381398
ZR10-1/2: RNCC: 3 | RNVC: 2

29 May 1995

5120-12-321-7618
Mechanical Puller Attachment

123217618
3-400-P: RNCC: 3 | RNVC: 2

22 Jun 1990

5120-12-181-1309
Socket Wrench Socket

121811309
1088-5: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-133-4624
Box Wrench

121334624
518589020300: RNCC: 3 | RNVC: 2
5185890203: RNCC: 5 | RNVC: 2
022M00400: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-028-5753

5120-12-383-1357
Hand Terminal Crimping Tool

123831357
210805K: RNCC: 3 | RNVC: 2

16 Sep 2010

5120-12-324-6151
Auswechselwe Griff

123246151
126589016200: RNCC: 3 | RNVC: 2

7 Mar 1991

5120-12-362-9608
Mechanical Puller

123629608
062786: RNCC: 3 | RNVC: 2

21 Apr 2004

5120-12-190-1376
Montagewerkzeug

121901376
7024R: RNCC: 3 | RNVC: 2
7024R: RNCC: 3 | RNVC: 2
7024 R: RNCC: 5 | RNVC: 9

9 Nov 1981

5120-12-388-2050
Socket Wrench Screwdriver Attachment

123882050
1054/8: RNCC: 3 | RNVC: 2
4018754006991: RNCC: 5 | RNVC: 2
03151408: RNCC: 5 | RNVC: 2

2 Mar 2012

5120-12-362-4584
Combination Box And Open End Wrench

123624584
54.0084.960.39: RNCC: 3 | RNVC: 2
16-4,5: RNCC: 5 | RNVC: 2

26 Feb 2004

5120-12-152-6907
Socket Wrench Socket

121526907
NO PRIMARY REF 12-152-6907: RNCC: 3 | RNVC: 2
109574: RNCC: 5 | RNVC: 9
7420M14: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-373-5529
Face Spanner Wrench Socket

123735529
58512-0040: RNCC: 3 | RNVC: 2

14 Nov 2007

5120-12-137-4361
Spanner Wrench

121374361
1227-022: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-195-4629
Hand Hydraulic Jack

121954629
202656.2: RNCC: 3 | RNVC: 2
202.656.2: RNCC: 5 | RNVC: 2
306076.4A: RNCC: 5 | RNVC: 2

28 Feb 1983

5120-12-362-4809
Cross Tip Screwdriver

123624809
54.0084.960.32: RNCC: 3 | RNVC: 2
8078-2: RNCC: 5 | RNVC: 2

2 Mar 2004

5120-12-131-6985

5120-12-309-0801
Aligning Punch

123090801
5100255: RNCC: 2 | RNVC: 2

11 Dec 1986

5120-12-307-2781
Spanner Wrench

123072781
06L6304: RNCC: 3 | RNVC: 9

28 May 1986

5120-12-196-1899
Ratchet Wrench

121961899
NO PRIMARY REF 12-196-1899: RNCC: 3 | RNVC: 2
2058: RNCC: 5 | RNVC: 9

9 Jun 1983

5120-12-370-6043
Craftsman's Tweezers

123706043
920255: RNCC: 3 | RNVC: 2
4003773054627: RNCC: 5 | RNVC: 2
00.19.02.59: RNCC: 5 | RNVC: 2

28 Nov 2006

5120-12-303-5616
Hand Terminal Crimping Tool

123035616
09990000076: RNCC: 3 | RNVC: 2

4 Apr 1985

5120-12-183-9676
Socket Wrench Socket

121839676
NO PRIMARY REF 12-183-9676: RNCC: 3 | RNVC: 2
6700DM5: RNCC: 5 | RNVC: 9

7 Jun 1980

5120-12-342-6782
Ratchet Wrench

123426782
25-10X11: RNCC: 3 | RNVC: 2
41131011: RNCC: 5 | RNVC: 2

13 Mar 1997

5120-12-348-4849
Dapping Punch

123484849
05.001.04.04.0: RNCC: 3 | RNVC: 2

29 Jun 1999

5120-12-368-3206
Mechanical Puller

123683206
88.1.642.3690: RNCC: 3 | RNVC: 2

17 Feb 2006

5120-12-345-3065
Mechanical Puller

123453065
F3 0277690: RNCC: 3 | RNVC: 2

2 Mar 1998

5120-12-360-3810
Screw Thread Insert Inserter

123603810
F30373635: RNCC: 3 | RNVC: 2

15 May 2003

5120-12-345-4370
Seal Inserter

123454370
0009419267: RNCC: 3 | RNVC: 2

16 Mar 1998

5120-12-338-8913
Mechanical Puller Attachment

123388913
05.012.26.03.0: RNCC: 3 | RNVC: 2

5 Sep 1995

5120-12-177-5444
Electronic Equipment Alignment Tool

121775444
1-151: RNCC: 3 | RNVC: 2

5 Feb 1979

5120-12-139-2475
V Einfuehrerbuchse

121392475
010M02400: RNCC: 3 | RNVC: 2
VM72798: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-186-7346
Auswechselwe Griff

121867346
NO PRIMARY REF 12-186-7346: RNCC: 3 | RNVC: 2
MA370006: RNCC: 5 | RNVC: 2
MA370006: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-176-1774
Screwdriver Bit

121761774
W171: RNCC: 3 | RNVC: 2
W171: RNCC: 3 | RNVC: 2
C 6799 115: RNCC: 5 | RNVC: 2

13 Nov 1978

5120-12-332-1741
Socket Wrench Socket

123321741
2300109-990996.000.0: RNCC: 2 | RNVC: 2
2300109-990996.000.0: RNCC: 3 | RNVC: 2

23 Jul 1993

5120-12-146-2965
V Eindrueck- Huelse

121462965
4015890661: RNCC: 3 | RNVC: 2
401589066100: RNCC: 5 | RNVC: 2
4015890661: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-3642
Open End Wrench

121333642
NO PRIMARY REF 12-133-3642: RNCC: 3 | RNVC: 2
105834: RNCC: 5 | RNVC: 9
1953Z5-8X11-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-348-6472
Torque Wrench Adapter

123486472
8791-11: RNCC: 3 | RNVC: 2

29 Jul 1999

5120-12-306-1727
Spanner Wrench

123061727
941.719.171: RNCC: 3 | RNVC: 9

3 Feb 1986

5120-12-373-4296
Mechanical Puller

123734296
1X56137180: RNCC: 3 | RNVC: 2
1X56137180: RNCC: 5 | RNVC: 2

31 Oct 2007

5120-12-361-8879
Pliers

123618879
415204: RNCC: 3 | RNVC: 2
415204: RNCC: 5 | RNVC: 2

1 Dec 2003

5120-12-313-6932

5120-12-357-2274
Duese Reiniger

123572274
0986611160: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-163-6625
Schluessel

121636625
26-21C1270G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-378-2851
Socket Wrench Socket

123782851
0771031802000: RNCC: 3 | RNVC: 2
771-LTZ-18: RNCC: 5 | RNVC: 2
00.40.14.37: RNCC: 5 | RNVC: 2

25 Mar 2009

5120-12-356-0210
Socket Wrench Screwdriver Attachment

123560210
44A-7/64: RNCC: 3 | RNVC: 2
01450007: RNCC: 5 | RNVC: 2
01 45 00 07: RNCC: 5 | RNVC: 9

15 Jan 2002

5120-12-185-6480
Offset Screwdriver

121856480
173-6: RNCC: 3 | RNVC: 9

21 Oct 1980

5120-12-325-1311
Mechanical Puller Step Plate

123251311
1000173-992000.006.0: RNCC: 2 | RNVC: 2
1000173-992000.006.0: RNCC: 3 | RNVC: 2

7 May 1991

5120-12-385-6931
Mechanical Puller Attachment

123856931
1X53 174 739/2: RNCC: 3 | RNVC: 2

30 Jun 2011

5120-12-348-3713
Open End Wrench

123483713
520-990200.00.0: RNCC: 2 | RNVC: 2
520-990200.00.0: RNCC: 3 | RNVC: 2

10 Jun 1999

5120-12-120-6765
Rauhkratze

121206765
158A: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-369-8120
Socket Wrench Socket

123698120
135817: RNCC: 3 | RNVC: 2
0110606410000: RNCC: 5 | RNVC: 2

17 Aug 2006

5120-12-172-0528
Hand-Operated Grommet And Eyelet Press

121720528
N0VA: RNCC: 3 | RNVC: 9

13 Dec 1977

5120-12-176-2809
Montagevorrichtung

121762809
403589056300: RNCC: 3 | RNVC: 2

23 Nov 1978

5120-12-195-0264
Ausdru Grundplatte

121950264
1X56136351: RNCC: 3 | RNVC: 2

3 Jan 1983

5120-12-194-6748

5120-12-317-7578
Mechanical Puller

123177578
CH1992/104: RNCC: 3 | RNVC: 2
1206 9460: RNCC: 5 | RNVC: 2

10 May 1989

5120-12-351-2772
Dreh Winkelscheibe

123512772
52248100: RNCC: 3 | RNVC: 2
52248100: RNCC: 3 | RNVC: 2
Y20044010: RNCC: 3 | RNVC: 2
(241)A4249Y20044010: RNCC: 8 | RNVC: 2
Y20044010: RNCC: 8 | RNVC: 2

10 Jul 2000

5120-12-315-3883
Aligning Punch

123153883
503426: RNCC: 3 | RNVC: 2

19 Oct 1988

5120-12-144-5818
Mechanical Puller

121445818
3313-9910-000: RNCC: 3 | RNVC: 2
3313-9910-000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-320-1051
Lager- Und Einsatz

123201051
99366648: RNCC: 3 | RNVC: 2

7 Dec 1989

5120-12-144-2438
Steel Fish Tape

121442438
5161: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-383-6925
M Indentation Tool

123836925
1X56.095.085: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-12-393-9708
Hand Blind Riveter

123939708
048619: RNCC: 3 | RNVC: 2
B 510-1 QI: RNCC: 5 | RNVC: 2
048619: RNCC: 5 | RNVC: 2

25 Oct 2013

5120-12-342-0630
Pliers

123420630
2705-K: RNCC: 3 | RNVC: 2

5 Dec 1996

5120-12-070-0146

5120-12-380-4191
Screwdriver Bit

123804191
00599: RNCC: 3 | RNVC: 2
269-T10-T15: RNCC: 5 | RNVC: 2

28 Oct 2009

5120-12-070-0140

5120-12-389-8128
Schloszoe Werkzeug

123898128
KV3081: RNCC: 3 | RNVC: 2

27 Aug 2012

5120-12-312-2033
Hand Cartridge Removing Hook

123122033
2195-9863-020: RNCC: 3 | RNVC: 2
2195-9863-020: RNCC: 5 | RNVC: 9

2 Dec 1987

5120-12-153-2811
Socket Wrench

121532811
NM289-09: RNCC: 3 | RNVC: 2
1201 9457: RNCC: 5 | RNVC: 2
NM289-09: RNCC: 5 | RNVC: 9
A26-50-113: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-309-8162
Schluessel

123098162
001-218.016-000W7: RNCC: 2 | RNVC: 2
001-218.016-000W7: RNCC: 3 | RNVC: 2

6 Mar 1987

5120-12-391-7141
Mechanical Puller Forcing Screw

123917141
80996230037: RNCC: 3 | RNVC: 2
80.99623-0037: RNCC: 5 | RNVC: 2

28 Mar 2013

5120-12-329-6362
Open End Wrench

123296362
C42407-Z4-C5: RNCC: 3 | RNVC: 2

11 Sep 1992

5120-12-371-7316
Mechanical Puller

123717316
80996026012: RNCC: 3 | RNVC: 2
80.99602-6012: RNCC: 5 | RNVC: 2

9 May 2007

5120-12-174-2271
Hand Hammer

121742271
NO PRIMARY REF 12-174-2271: RNCC: 3 | RNVC: 2
107602: RNCC: 5 | RNVC: 9
3721K: RNCC: 5 | RNVC: 9

15 Jun 1978

5120-12-156-1655
Cross Tip Screwdriver

121561655
M257-10: RNCC: 3 | RNVC: 2
22120NM: RNCC: 5 | RNVC: 2
M257-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-182-4700
Socket Wrench Crowfoot Attachment

121824700
NO PRIMARY REF 12-182-4700: RNCC: 3 | RNVC: 2
1951M32: RNCC: 5 | RNVC: 9

6 Feb 1980

5120-12-376-3800
Blind Riveter Mandrel

123763800
2875HT80-04-1AY: RNCC: 3 | RNVC: 2

22 Sep 2008

5120-12-387-9463
Socket Wrench

123879463
00554: RNCC: 3 | RNVC: 2
265P-5,5: RNCC: 5 | RNVC: 2

10 Feb 2012

5120-12-340-4883
Electronic Equipment Alignment Tool

123404883
1-553: RNCC: 3 | RNVC: 2

23 Apr 1996

5120-12-147-6741
Socket Wrench

121476741
895-7: RNCC: 3 | RNVC: 2
200-7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-384-0137
Pin Inserter

123840137
F30378316: RNCC: 3 | RNVC: 2

12 Jan 2011

5120-12-368-9517
Tap And Reamer Wrench

123689517
100-1: RNCC: 3 | RNVC: 2
01.41.63.01: RNCC: 5 | RNVC: 2

9 May 2006

5120-12-305-4991
Socket Wrench Crowfoot Attachment

123054991
4550-2: RNCC: 3 | RNVC: 2
5719650005: RNCC: 5 | RNVC: 2
314589010300: RNCC: 5 | RNVC: 2

14 Nov 1985

5120-12-311-8628
Hand Material Handling Hook

123118628
AFG005987: RNCC: 3 | RNVC: 2

26 Oct 1987

5120-12-199-2106
Tool

121992106
SL46-D2: RNCC: 3 | RNVC: 2
SL46-D2: RNCC: 5 | RNVC: 9

4 Apr 1984

5120-12-123-5026
Open End Wrench

121235026
8X9DIN658: RNCC: 3 | RNVC: 2
TFS00-08341: RNCC: 5 | RNVC: 2
TFS00-08341: RNCC: 5 | RNVC: 9
8X9DIN658: RNCC: 5 | RNVC: 9
DIN658-8X9: RNCC: 5 | RNVC: 9
TFS00-08341: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-323-8592
Lager- Und Einsatz

123238592
99374294: RNCC: 3 | RNVC: 2
374 294: RNCC: 5 | RNVC: 2

27 Dec 1990

5120-12-139-3094
Kolben Druckstueck

121393094
8205892463: RNCC: 3 | RNVC: 2
016M03700: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-377-8399
Telescoping Pole

123778399
54.1100.173.00: RNCC: 3 | RNVC: 2

16 Feb 2009

5120-12-336-5104
Seal Inserter

123365104
0852 5033: RNCC: 3 | RNVC: 2
8525033: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-368-0287
Socket Wrench

123680287
4182705: RNCC: 3 | RNVC: 2
300.0390.00102: RNCC: 5 | RNVC: 2

22 Nov 2005

5120-12-364-4726
Socket Wrench Screwdriver Attachment

123644726
03151410-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-386-5169
Cyli Mounting Tool

123865169
F6787786: RNCC: 3 | RNVC: 2

7 Sep 2011

5120-12-385-2358
Hand-Operated Grommet And Eyelet Press

123852358
50.000.050: RNCC: 3 | RNVC: 2

12 May 2011

5120-12-374-5526
Hand Screw Jack

123745526
7L0011031E: RNCC: 3 | RNVC: 2

26 Feb 2008

5120-12-305-3095
Box Wrench

123053095
NO PRIMARY REF 12-305-3095: RNCC: 3 | RNVC: 2
3S-M8X9: RNCC: 5 | RNVC: 9
17-8X9: RNCC: 5 | RNVC: 9

21 Oct 1985

5120-12-152-5610
Box Wrench

121525610
510195-000-05: RNCC: 2 | RNVC: 2
169121102: RNCC: 5 | RNVC: 2
E169121102: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-377-5452
Richt- Platte

123775452
313932: RNCC: 3 | RNVC: 2
0854-03-15-00/37: RNCC: 5 | RNVC: 2

23 Jan 2009

5120-12-150-1562
Typenhebelaufnahme

121501562
TFS49-99022: RNCC: 3 | RNVC: 2
TFS49-99022: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-336-7027
Cable Type Ratchet Lever Puller

123367027
TU-L15: RNCC: 3 | RNVC: 2
6171169: RNCC: 5 | RNVC: 2
617.1169: RNCC: 5 | RNVC: 9

12 Dec 1994

5120-12-173-5683
Spanner Wrench

121735683
5224-700: RNCC: 2 | RNVC: 2
W2359-31: RNCC: 3 | RNVC: 2
5224-700: RNCC: 5 | RNVC: 9
5224-700: RNCC: 5 | RNVC: 9
W2359-31: RNCC: 5 | RNVC: 9

24 Apr 1978

5120-12-143-9736
Brake Shoe Adjusting Tool

121439736
5167-86-09-01: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-310-8498
Pedal Adjustment Tool Compressor

123108498
2500191-100: RNCC: 3 | RNVC: 2

2 Jul 1987

5120-12-369-2804
Drive Pin Punch

123692804
80996040216: RNCC: 3 | RNVC: 2
80.99604-0216: RNCC: 5 | RNVC: 2

14 Jun 2006

5120-12-345-5838
Pliers

123455838
65255130: RNCC: 3 | RNVC: 2
65 25 5 130: RNCC: 5 | RNVC: 2

2 Apr 1998

5120-12-050-0835

5120-12-319-4219
Torque Wrench

123194219
8462-01: RNCC: 3 | RNVC: 2

29 Sep 1989

5120-12-342-6785
Ratchet Wrench

123426785
25-16X18: RNCC: 3 | RNVC: 2
41131618: RNCC: 5 | RNVC: 2

13 Mar 1997

5120-12-193-9536
Hand Hydraulic Jack

121939536
027 879.3: RNCC: 3 | RNVC: 2
0015831415: RNCC: 5 | RNVC: 2
ATMX2,5-167: RNCC: 5 | RNVC: 2
67671.3: RNCC: 5 | RNVC: 2

20 Sep 1982

5120-12-123-5580
Schluesseleinsatzsa

121235580
NO PRIMARY REF 12-123-5580: RNCC: 3 | RNVC: 2
107871: RNCC: 5 | RNVC: 9
157457: RNCC: 5 | RNVC: 9
4115-1-2: RNCC: 5 | RNVC: 9
4115-1A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-323-0894
Seal Remover

123230894
14541 G-R: RNCC: 3 | RNVC: 2

23 Oct 1990

5120-12-194-9516
Spanner Wrench

121949516
1X56136299: RNCC: 3 | RNVC: 2

21 Dec 1982

5120-12-393-8475
Mounting To Sleeve

123938475
7077744: RNCC: 3 | RNVC: 2

16 Oct 2013

5120-12-363-8422
Bearing And Bushing Inserter

123638422
T671P5001235: RNCC: 3 | RNVC: 2

30 Jul 2004

5120-12-090-1854

5120-12-356-4204
Socket Wrench Set

123564204
41150004: RNCC: 3 | RNVC: 2

26 Feb 2002

5120-12-151-6616
Gehaeus Gabelhebel

121516616
WKW9009-0102V5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-368-6930
Socket Wrench Screwdriver Attachment

123686930
3210IN-14: RNCC: 3 | RNVC: 2
00.49.79.32: RNCC: 5 | RNVC: 2

6 Apr 2006

5120-12-126-4668
Electronic Equipment Alignment Tool

121264668
NO PRIMARY REF 12-126-4668: RNCC: 3 | RNVC: 2
108678: RNCC: 5 | RNVC: 9
5501: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-180-9047
Sheet Metalworking Dolly Block

121809047
NO PRIMARY REF 12-180-9047: RNCC: 3 | RNVC: 2
3733: RNCC: 5 | RNVC: 9

11 Oct 1979

5120-12-172-1847
Spanner Wrench

121721847
903-812-0087: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-309-8979
Mechanical Puller Adapter

123098979
507589002501: RNCC: 3 | RNVC: 2
507589002501: RNCC: 5 | RNVC: 2
507589002501: RNCC: 5 | RNVC: 2
5075890025/01: RNCC: 5 | RNVC: 2

16 Mar 1987

5120-12-134-2747

5120-12-126-1299

5120-12-365-2914
Screwdriver Bit

123652914
7016 798 152: RNCC: 3 | RNVC: 2

16 Dec 2004

5120-12-350-2559
Bl Ausbeulwerkzeug

123502559
145: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-348-2845
Screwdriver Bit

123482845
05002950001: RNCC: 3 | RNVC: 2
85-PH1-PH2: RNCC: 5 | RNVC: 2
002950: RNCC: 5 | RNVC: 9

25 May 1999

5120-12-331-3974
Schluessel

123313974
66284-983: RNCC: 3 | RNVC: 2
5440102: RNCC: 5 | RNVC: 2

3 May 1993

5120-12-391-0543
Mechanical Puller

123910543
F30379133: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-12-330-9350
Socket Wrench Socket

123309350
A7402DZ-11/32: RNCC: 3 | RNVC: 2
A7402DZ11-32: RNCC: 5 | RNVC: 2
1760281: RNCC: 5 | RNVC: 2

1 Mar 1993

5120-12-337-2947
Spanner Wrench

123372947
ZR10-1: RNCC: 3 | RNVC: 2

14 Feb 1995

5120-12-151-0552
Lagerbu Spannhuelse

121510552
1X46951091: RNCC: 3 | RNVC: 2
V95109-1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-147-5895
Open End Wrench

121475895
NO PRIMARY REF 12-147-5895: RNCC: 3 | RNVC: 2
WZ21-10X12MM: RNCC: 5 | RNVC: 2
LG142630-10X12MM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-6863
Adjustable Wrench

121746863
NM280-04: RNCC: 3 | RNVC: 2
NM280-04: RNCC: 5 | RNVC: 9

19 Jul 1978

5120-12-123-5343
Combination Box And Open End Wrench

121235343
DIN3113-A50: RNCC: 2 | RNVC: 2
13-50: RNCC: 3 | RNVC: 2
400-50: RNCC: 3 | RNVC: 2
40085050: RNCC: 5 | RNVC: 2
00400050082: RNCC: 5 | RNVC: 2
04000500: RNCC: 5 | RNVC: 9
400MM50: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-1993
Drive Pin Punch

123681993
JDMS6-165: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-314-9584
Spanner Wrench

123149584
P-0-724A: RNCC: 3 | RNVC: 2
P-0-724: RNCC: 5 | RNVC: 9

1 Sep 1988

5120-12-154-1810
Spanner Wrench

121541810
0276180002: RNCC: 3 | RNVC: 2
S000276180002000: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-199-7894

5120-12-360-8747
Mechanical Puller

123608747
0854 1146: RNCC: 3 | RNVC: 2

18 Jul 2003

5120-12-350-8470
Machinist's Vise

123508470
HEUERFRONT140MMDREHBAR: RNCC: 3 | RNVC: 2
HEUERFRONT140MMDREHBAR: RNCC: 5 | RNVC: 9

29 May 2000

5120-12-303-8490
Mechanical Puller Attachment

123038490
3B33-1-3: RNCC: 3 | RNVC: 2

8 May 1985

5120-12-126-3335
Hand Hammer

121263335
NO PRIMARY REF 12-126-3335: RNCC: 3 | RNVC: 2
DIN5161: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-2058
Leveling-Support Jack

123882058
3530: RNCC: 3 | RNVC: 2
SF 60-400: RNCC: 5 | RNVC: 2

2 Mar 2012

5120-12-364-5640
Combination Box And Open End Wrench

123645640
40083030-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-129-4513

5120-12-364-6766
Drive Pin Punch

123646766
70090004-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-381-0366
Leveling-Support Jack Set

123810366
272425: RNCC: 3 | RNVC: 2
65162612: RNCC: 5 | RNVC: 2
651626129143: RNCC: 5 | RNVC: 2

30 Dec 2009

5120-12-010-9665

5120-12-315-8970
Preformed Packing Inserter

123158970
0009419300: RNCC: 3 | RNVC: 2

6 Dec 1988

5120-12-023-1410

5120-12-167-0924
Open End Wrench

121670924
1.3322.00: RNCC: 3 | RNVC: 2
6.3080.00: RNCC: 3 | RNVC: 9
6908: RNCC: 5 | RNVC: 2
820609: RNCC: 5 | RNVC: 2
B1455: RNCC: 5 | RNVC: 2
B1455: RNCC: 5 | RNVC: 9

17 Nov 1976

5120-12-132-1177

5120-12-181-5068
Box Wrench

121815068
99354214: RNCC: 3 | RNVC: 2
110320: RNCC: 5 | RNVC: 2
110320: RNCC: 5 | RNVC: 2
191209: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-384-5227
Mounting Lever

123845227
F6557952: RNCC: 3 | RNVC: 2

2 Mar 2011

5120-12-023-1431

5120-12-325-6659
Spanner Wrench

123256659
5105.020.07.04: RNCC: 3 | RNVC: 2
7820353138: RNCC: 5 | RNVC: 2
78203 53138: RNCC: 5 | RNVC: 9

27 Jun 1991

5120-12-374-7867
Bearing And Bushing Inserter And Remover Set

123747867
950589013300: RNCC: 3 | RNVC: 2

20 Mar 2008

5120-12-135-9435
Electronic Crystal Unit Extractor

121359435
HS8070: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-010-9640

5120-12-130-3296
Flat Tip Screwdriver

121303296
16812: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-331-6243
Mechanical Puller

123316243
80996046010: RNCC: 3 | RNVC: 2
80.99604.6010: RNCC: 5 | RNVC: 2
V1130: RNCC: 5 | RNVC: 2

1 Jun 1993

5120-12-316-3059
Socket Head Screw Key

123163059
42901012: RNCC: 3 | RNVC: 2
LN-1,27MMBP: RNCC: 5 | RNVC: 2

9 Jan 1989

5120-12-132-1092
Spanner Wrench

121321092
499202-3194: RNCC: 3 | RNVC: 2
499202-3194: RNCC: 5 | RNVC: 2
499202-3194: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-0307
Crimping Tool Die

123880307
1185-35101: RNCC: 3 | RNVC: 2
80.99625-0114: RNCC: 5 | RNVC: 2
80996250114: RNCC: 5 | RNVC: 2

17 Feb 2012

5120-12-384-3039
Torque Wrench Adapter

123843039
F30039520: RNCC: 3 | RNVC: 2

10 Feb 2011

5120-12-364-4720
Torque Wrench Adapter

123644720
58241004-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-381-8343
Ratchet Wrench Set

123818343
503.4390: RNCC: 3 | RNVC: 2
391412187202: RNCC: 6 | RNVC: 9

8 Apr 2010

5120-12-021-3502

5120-12-364-6764
Drive Pin Punch

123646764
70090002-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-393-7821
Seal Inserter And Remover

123937821
9999100191: RNCC: 3 | RNVC: 2
9-999-100191: RNCC: 5 | RNVC: 2

10 Oct 2013

5120-12-367-6035
Socket Head Screw Key

123676035
400-100-08: RNCC: 3 | RNVC: 2
230/693/1: RNCC: 5 | RNVC: 2

8 Sep 2005

5120-12-197-7557
Mechanical Puller Attachment

121977557
SUPER ROLLEX4580: RNCC: 3 | RNVC: 2
000589473400: RNCC: 3 | RNVC: 2
000 589 47 34 00: RNCC: 5 | RNVC: 2

21 Nov 1983

5120-12-126-1312
Wood Mallet

121261312
DIN7462-A70: RNCC: 2 | RNVC: 2
A70DIN7462: RNCC: 5 | RNVC: 2
1543612109045043: RNCC: 5 | RNVC: 9
0808543312589: RNCC: 5 | RNVC: 9
70DIN7462: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-175-5947
Torque Wrench

121755947
NO PRIMARY REF 12-175-5947: RNCC: 3 | RNVC: 2
73NMR12: RNCC: 5 | RNVC: 9
96502612: RNCC: 5 | RNVC: 9

3 Oct 1978

5120-12-137-4118
Ketten- Winde

121374118
23709: RNCC: 3 | RNVC: 2
23709: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-1374

5120-12-368-6505
Combination Box And Open End Wrench

123686505
203A-7/8: RNCC: 3 | RNVC: 2
00.31.46.42: RNCC: 5 | RNVC: 2

4 Apr 2006

5120-12-133-3226
Crimping Tool Die

121333226
05112: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-384-4119
Mechanical Puller

123844119
4911004: RNCC: 3 | RNVC: 2

22 Feb 2011

5120-12-044-4926

5120-12-342-8693
Crimping Tool Die

123428693
R16: RNCC: 3 | RNVC: 2

10 Apr 1997

5120-12-371-4140
Hand Hammer

123714140
5293.98.2000: RNCC: 3 | RNVC: 2

27 Mar 2007

Load More Results