What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 34 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 34 of 62

5120-12-130-8467
Loch Und N Stempel

121308467
651-1-5MMD: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-365-3303
Mechanical Puller

123653303
5583591: RNCC: 3 | RNVC: 2
5583591: RNCC: 8 | RNVC: 2
(241)A42495583591: RNCC: 8 | RNVC: 2

21 Dec 2004

5120-12-391-9256
M Indentation Tool

123919256
80996040226: RNCC: 3 | RNVC: 2
80.99604-0226: RNCC: 5 | RNVC: 2

18 Apr 2013

5120-12-126-2240
Pliers

121262240
TL5180-0085-57: RNCC: 2 | RNVC: 2
418-240: RNCC: 3 | RNVC: 2
418: RNCC: 3 | RNVC: 2
54-240: RNCC: 5 | RNVC: 9
4984-240: RNCC: 5 | RNVC: 9
5180-0085-57: RNCC: 5 | RNVC: 9
5180-085-57: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-358-7784
Bearing And Bushing Inserter

123587784
80996330010: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-165-0182
Schluessel

121650182
BN228700: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-040-8061

5120-12-335-4912
Hand Lead Seal Press

123354912
53205145: RNCC: 3 | RNVC: 2

23 Aug 1994

5120-12-328-2960
Mechanical Puller

123282960
000589073500: RNCC: 3 | RNVC: 2
000 589 07 35 00: RNCC: 5 | RNVC: 2

5 May 1992

5120-12-375-9259
Box Wrench

123759259
SMJ 230-001-106: RNCC: 3 | RNVC: 2
SMJ230-001-106: RNCC: 5 | RNVC: 2

22 Jul 2008

5120-12-329-6363
Open End Wrench

123296363
C42407-Z4-C3: RNCC: 3 | RNVC: 2

11 Sep 1992

5120-12-139-5803
Mechanical Puller

121395803
5185891833: RNCC: 3 | RNVC: 2
003M00500: RNCC: 3 | RNVC: 2
518589183300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-336-6460
Electrical Contact Remover

123366460
09990000012: RNCC: 3 | RNVC: 2

5 Dec 1994

5120-12-163-6632
Spanner Wrench

121636632
26-21C1362G002: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-374-0263
Socket Wrench Crowfoot Attachment

123740263
540-27: RNCC: 3 | RNVC: 2
02200027: RNCC: 5 | RNVC: 2

10 Jan 2008

5120-12-343-6798
Swivel Knob Jeweler's Screwdriver

123436798
2127-000: RNCC: 3 | RNVC: 9

14 Jul 1997

5120-12-183-7089
Face Spanner Wrench Socket

121837089
4S51601-0000: RNCC: 3 | RNVC: 2

13 May 1980

5120-12-126-2610
Quick Adjusting Screw Clamp

121262610
D30-40: RNCC: 3 | RNVC: 2
TG40T40: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-371-9559
Hand Hydraulic Jack

123719559
250.386.7: RNCC: 3 | RNVC: 2
ATD5-220: RNCC: 5 | RNVC: 2

4 Jun 2007

5120-12-384-1839
Aligning Punch

123841839
7093441: RNCC: 3 | RNVC: 2

1 Feb 2011

5120-12-383-8293
Pipe Wrench

123838293
0530230C: RNCC: 3 | RNVC: 2

10 Dec 2010

5120-12-361-8259
Hand Beading Tool

123618259
15316901: RNCC: 3 | RNVC: 2

21 Nov 2003

5120-12-159-6301

5120-12-153-8486
Socket Wrench

121538486
CH1773-104: RNCC: 3 | RNVC: 2
5605890116/00: RNCC: 5 | RNVC: 2
560589011600: RNCC: 5 | RNVC: 2
CH1773-104: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-379-5423
Open End Wrench

123795423
6673230: RNCC: 3 | RNVC: 2
6673230: RNCC: 5 | RNVC: 2
DS 3114 46: RNCC: 5 | RNVC: 2
04010886667323: RNCC: 5 | RNVC: 2
04010886667323: RNCC: 5 | RNVC: 2
DS 3114 46: RNCC: 5 | RNVC: 2
4010886667323: RNCC: 5 | RNVC: 9
4010886667323: RNCC: 5 | RNVC: 9

5 Aug 2009

5120-12-161-8168
Abziehvorrichtung

121618168
WL49F: RNCC: 3 | RNVC: 2
83091436144: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-389-3960
Socket Wrench Set

123893960
630002-46: RNCC: 3 | RNVC: 2

2 Jul 2012

5120-12-182-3001
Combination Box And Open End Wrench

121823001
NO PRIMARY REF 12-182-3001: RNCC: 3 | RNVC: 2
11CP12: RNCC: 5 | RNVC: 9

23 Jan 1980

5120-12-123-5502
Socket Wrench

121235502
590-13-32: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-371-1723
Socket Wrench Socket

123711723
02050010-TCS: RNCC: 3 | RNVC: 2

22 Feb 2007

5120-12-140-0671
Sat Gurt- Spanner

121400671
116: RNCC: 3 | RNVC: 2
869B: RNCC: 3 | RNVC: 2
1060: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-020-5408

5120-12-132-2664

5120-12-127-3946

5120-12-173-4342
Spanner Wrench

121734342
532008U33W1: RNCC: 3 | RNVC: 2
532008U33W1: RNCC: 5 | RNVC: 2
532008U33W1: RNCC: 5 | RNVC: 9
532008U33W1: RNCC: 5 | RNVC: 9

14 Apr 1978

5120-12-190-9375
Schluesseleinsatz

121909375
31VR24: RNCC: 3 | RNVC: 2
626309: RNCC: 5 | RNVC: 2

23 Dec 1981

5120-12-324-5967
Socket Wrench Socket

123245967
3037: RNCC: 3 | RNVC: 2

4 Mar 1991

5120-12-149-5303
Spanner Wrench

121495303
7744J: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-308-6378
Socket Wrench Screwdriver Attachment

123086378
8/10/2740: RNCC: 3 | RNVC: 2

30 Oct 1986

5120-12-156-1592
Open End Wrench

121561592
NM284-13: RNCC: 3 | RNVC: 2
NM284-13: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-359-4744
Auswechs Klemmteil

123594744
T621P4001120: RNCC: 3 | RNVC: 2

10 Feb 2003

5120-12-389-3195
Beari Staking Tool

123893195
103589013900: RNCC: 3 | RNVC: 2
103589013900: RNCC: 5 | RNVC: 2

20 Jun 2012

5120-12-184-3106
Stemmer

121843106
510016: RNCC: 2 | RNVC: 9

15 Jul 1980

5120-12-383-8632
Hand Hammer

123838632
770089: RNCC: 3 | RNVC: 2

14 Dec 2010

5120-12-327-6700

5120-12-367-8665
Screwdriver Bit

123678665
71117692574: RNCC: 3 | RNVC: 2
71117692574: RNCC: 5 | RNVC: 2

25 Oct 2005

5120-12-024-1248

5120-12-387-4024
Vise Jaw Caps

123874024
113160: RNCC: 3 | RNVC: 2

9 Dec 2011

5120-12-386-5181
Driftpin

123865181
F30378874: RNCC: 3 | RNVC: 2

7 Sep 2011

5120-12-366-8628
Socket Wrench Crowfoot Attachment

123668628
440MJ18: RNCC: 3 | RNVC: 2
02210018: RNCC: 5 | RNVC: 2
02210018: RNCC: 5 | RNVC: 2

16 Jun 2005

5120-12-364-6804
Socket Wrench Socket

123646804
03020024-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-023-1440

5120-12-163-6633
Montagevorrichtung

121636633
26-21C1394G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-156-1654
Socket Head Screw Key

121561654
M290-125: RNCC: 3 | RNVC: 2
M290-125: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-166-5291
Zentrierbolzen

121665291
K4187-0000-01: RNCC: 3 | RNVC: 9
K4188: RNCC: 5 | RNVC: 9

16 Sep 1976

5120-12-318-4841
Slip Joint Pliers

123184841
DIN5231-C240GERAUHT: RNCC: 2 | RNVC: 2

19 Jul 1989

5120-12-135-5944
Box Wrench

121355944
DIN3521-22: RNCC: 2 | RNVC: 2
3-989: RNCC: 3 | RNVC: 2
22DIN3521: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-350-2572
Bl Ausbeulwerkzeug

123502572
015/A: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-120-5139
Rubber Mallet

121205139
DIN5128-A200S-90: RNCC: 2 | RNVC: 2
606551: RNCC: 3 | RNVC: 2
1540-1: RNCC: 3 | RNVC: 2
01540000100: RNCC: 5 | RNVC: 2
A200SDIN5128-90: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-368-7170
Socket Wrench Socket

123687170
03030008: RNCC: 3 | RNVC: 2
6130020: RNCC: 3 | RNVC: 2
771-L 8: RNCC: 3 | RNVC: 2
00.48.52.02: RNCC: 5 | RNVC: 2

10 Apr 2006

5120-12-388-5465
Mecha Fitting Tool

123885465
437589006100: RNCC: 3 | RNVC: 2

29 Mar 2012

5120-12-151-6602
Gur Nietvorrichtung

121516602
WKW9008-0406V20: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-172-7971
Mechanical Puller

121727971
1X56123282: RNCC: 3 | RNVC: 2
V45809: RNCC: 5 | RNVC: 2
83.09143-6031: RNCC: 5 | RNVC: 2
83091436031: RNCC: 5 | RNVC: 2

20 Feb 1978

5120-12-300-8662
Ausrichtwerk Griff

123008662
1013-100W71: RNCC: 3 | RNVC: 2
1013-100-W71: RNCC: 5 | RNVC: 2

5 Sep 1984

5120-12-314-8382
Inserted Hammer Face

123148382
NO PRIMARY REF 12-314-8382: RNCC: 3 | RNVC: 2
1954-40: RNCC: 5 | RNVC: 9

17 Aug 1988

5120-12-140-3014

5120-12-390-1873
Bearing And Bushing Inserter

123901873
F30372230: RNCC: 3 | RNVC: 2

12 Oct 2012

5120-12-357-0266
Torque Wrench Adapter

123570266
5206932: RNCC: 3 | RNVC: 2

25 Apr 2002

5120-12-368-8194
Socket Wrench Screwdriver Attachment

123688194
3225-PZ4: RNCC: 3 | RNVC: 2
00.50.19.72: RNCC: 5 | RNVC: 2

25 Apr 2006

5120-12-139-3048
Anschlus Druckring

121393048
8200170014: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-174-6057
Inserted Hammer Face

121746057
TL5120-0126-A108: RNCC: 2 | RNVC: 2
3208080: RNCC: 3 | RNVC: 2
220880: RNCC: 5 | RNVC: 9

13 Jul 1978

5120-12-309-9775
Driftpin

123099775
P-896264-001: RNCC: 3 | RNVC: 2
P896264-001: RNCC: 5 | RNVC: 2

25 Mar 1987

5120-12-194-0813
Torque Wrench Adapter

121940813
TL5120-0086-290: RNCC: 2 | RNVC: 2
6450D-22: RNCC: 5 | RNVC: 9
7852-7 22: RNCC: 5 | RNVC: 9
20/DCA-22: RNCC: 5 | RNVC: 9
6264110006: RNCC: 5 | RNVC: 9
58214022: RNCC: 5 | RNVC: 9
731-40SW22: RNCC: 5 | RNVC: 9
731/40 22: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-332-3796
Okular Zange

123323796
523510-0000.908: RNCC: 3 | RNVC: 2
523510-0000 908: RNCC: 5 | RNVC: 2
523510-0000.908: RNCC: 5 | RNVC: 2

4 Aug 1993

5120-12-153-5212
Schluessel

121535212
8205891403/00: RNCC: 3 | RNVC: 2
CH1774-11NM: RNCC: 5 | RNVC: 2
820589140300: RNCC: 5 | RNVC: 2
CH1774-11NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-0859
Box Wrench

121270859
NO PRIMARY REF 12-127-0859: RNCC: 3 | RNVC: 2
22A15-16X1: RNCC: 5 | RNVC: 9
41464648: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-353-4705
Ru Montierwerkzeug

123534705
346469: RNCC: 3 | RNVC: 2
93083-150V4: RNCC: 5 | RNVC: 2

28 Mar 2001

5120-12-392-3458
Driftpin

123923458
80996060698: RNCC: 3 | RNVC: 2
80.99606-0698: RNCC: 5 | RNVC: 2

28 May 2013

5120-12-325-5406
Socket Wrench Set

123255406
852AN: RNCC: 3 | RNVC: 2
4485350008: RNCC: 5 | RNVC: 2

17 Jun 1991

5120-12-386-1574
Screwdriver Bit Set

123861574
BT32A: RNCC: 3 | RNVC: 2

11 Aug 2011

5120-12-333-5873
Socket Wrench

123335873
844603080: RNCC: 3 | RNVC: 2

10 Jan 1994

5120-12-173-4653
Schluessel

121734653
AVMECH65: RNCC: 3 | RNVC: 2

18 Apr 1978

5120-12-316-2049
Tool

123162049
DCE.91.071.BVM: RNCC: 3 | RNVC: 2

30 Dec 1988

5120-12-364-7221
Mechanical Puller

123647221
5583582: RNCC: 3 | RNVC: 2
(241)A42495583582: RNCC: 8 | RNVC: 2
5583582: RNCC: 8 | RNVC: 2

22 Oct 2004

5120-12-345-3590
Mechanical Puller

123453590
F0 098289: RNCC: 3 | RNVC: 2

5 Mar 1998

5120-12-153-5029
Montagevorrichtung

121535029
510195-060-00: RNCC: 2 | RNVC: 2
169104401: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-339-9692
Ausdrueckwerkzeug

123399692
5069692: RNCC: 3 | RNVC: 2
698-464-0000: RNCC: 5 | RNVC: 2

7 Feb 1996

5120-12-306-9691
Schrau Schutzbacke

123069691
874600-160: RNCC: 3 | RNVC: 2
87460150: RNCC: 5 | RNVC: 2
10236: RNCC: 5 | RNVC: 9

22 Apr 1986

5120-12-388-9103
Vise Spindle

123889103
D0103894-001: RNCC: 3 | RNVC: 2

7 May 2012

5120-12-154-2562
Schubv Montagering

121542562
5191154-200-04: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-183-9844
Screwdriver Bit

121839844
05073030001: RNCC: 3 | RNVC: 2
2210S-18X3,0: RNCC: 3 | RNVC: 9
2210S-18X3,0X55: RNCC: 5 | RNVC: 2
2210-18X3-0: RNCC: 5 | RNVC: 9
73030: RNCC: 5 | RNVC: 9

7 Jun 1980

5120-12-192-3600
Mechanical Puller

121923600
41-1180-0200.000.0: RNCC: 2 | RNVC: 2
41-1180-0200.000.0: RNCC: 3 | RNVC: 2
5120121923600: RNCC: 5 | RNVC: 2
41-1180-0200.000.0: RNCC: 5 | RNVC: 9

19 Apr 1982

5120-12-327-1836
Socket Head Screw Key

123271836
40 0168 010: RNCC: 3 | RNVC: 2
40 0168 010: RNCC: 5 | RNVC: 9

12 Dec 1991

5120-12-328-4259
Dreh Winkelscheibe

123284259
F607045375379: RNCC: 3 | RNVC: 2
F6375379: RNCC: 5 | RNVC: 2

16 May 1992

5120-12-336-5085
Ku Montierwerkzeug

123365085
0852 4873: RNCC: 3 | RNVC: 2
8524873: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-146-5126
Schluesseleinsatz

121465126
1X56099049: RNCC: 3 | RNVC: 2
80996030031: RNCC: 5 | RNVC: 2
V92513: RNCC: 5 | RNVC: 9
V99049: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-2190
Cross Tip Screwdriver

121942190
T49077 2300: RNCC: 3 | RNVC: 2
05008730001: RNCC: 3 | RNVC: 2
350PH-2X300: RNCC: 5 | RNVC: 2
008730: RNCC: 5 | RNVC: 9
08730: RNCC: 5 | RNVC: 9
350PH-GR2/300: RNCC: 5 | RNVC: 9
350PRGR2-300: RNCC: 5 | RNVC: 9

12 Oct 1982

5120-12-306-2334
Ratchet Wrench

123062334
41V22: RNCC: 3 | RNVC: 2
41V-VIERKANT22MM: RNCC: 5 | RNVC: 2
633.968: RNCC: 5 | RNVC: 2

7 Feb 1986

5120-12-387-2603
Installation And Re

123872603
161.018: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-12-377-1757
Wrench

123771757
93110936: RNCC: 3 | RNVC: 2

16 Dec 2008

5120-12-364-3120
Socket Wrench Extension

123643120
11011002-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-364-5649
Open End Wrench

123645649
40061313-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-150-7591
Schluessel

121507591
510275: RNCC: 2 | RNVC: 2
1124358: RNCC: 5 | RNVC: 2
6144675: RNCC: 5 | RNVC: 2
510275: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-383-8381
Pipe Wrench

123838381
7220002C: RNCC: 3 | RNVC: 2

13 Dec 2010

5120-12-314-1275
Socket Wrench Socket

123141275
5187023: RNCC: 3 | RNVC: 2

9 Jun 1988

5120-12-157-9324
Spanner Wrench

121579324
122760: RNCC: 3 | RNVC: 2
122760: RNCC: 5 | RNVC: 2
122760: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-322-3942
Spanner Wrench

123223942
12791-120000.015: RNCC: 2 | RNVC: 2
009-039.120-015W4: RNCC: 3 | RNVC: 2
12791-120000.015: RNCC: 5 | RNVC: 2

17 Aug 1990

5120-12-149-5285
Hand Hammer

121495285
216-14: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-153-5233
Socket Wrench Socket

121535233
5615890408/00: RNCC: 3 | RNVC: 2
561589040800: RNCC: 5 | RNVC: 2
CH1773-3FE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-309-9437
Socket Wrench Socket

123099437
126 589 02 0900: RNCC: 3 | RNVC: 2

20 Mar 1987

5120-12-199-7092
Bearing And Bushing Inserter

121997092
206589006100: RNCC: 3 | RNVC: 2

24 May 1984

5120-12-175-3434
Torque Wrench Adapter

121753434
01TC30054: RNCC: 3 | RNVC: 2

11 Sep 1978

5120-12-322-2923
Socket Head Screw Key

123222923
10007501: RNCC: 3 | RNVC: 2

9 Aug 1990

5120-12-153-8480
Schwingh Klemmhebel

121538480
CH1773-107: RNCC: 3 | RNVC: 2
5605890416/00: RNCC: 5 | RNVC: 2
560589041600: RNCC: 5 | RNVC: 2
CH1773-107: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-151-6589
De Nietvorrichtung

121516589
WKW9008-0402V130: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-141-2964
Open End Wrench

121412964
NO PRIMARY REF 12-141-2964: RNCC: 3 | RNVC: 2
104963: RNCC: 5 | RNVC: 9
1931NZ11-32X7-16IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-342-0753
Socket Wrench Extension

123420753
DIN7434-12,5X125: RNCC: 2 | RNVC: 2
133312: RNCC: 3 | RNVC: 2

6 Dec 1996

5120-12-363-5333
Socket Wrench Handle

123635333
154376: RNCC: 3 | RNVC: 2
315-200MM: RNCC: 5 | RNVC: 2

25 Jun 2004

5120-12-337-9738
Hydraulic Jack Handle

123379738
TOR-1038-000A0-002A: RNCC: 3 | RNVC: 2

8 May 1995

5120-12-121-6880

5120-12-310-5400
Mechanical Puller

123105400
80996020099: RNCC: 3 | RNVC: 2
80.99602.0099: RNCC: 5 | RNVC: 2

29 May 1987

5120-12-374-9516
Screwdriver Handle

123749516
JDS7829: RNCC: 3 | RNVC: 2

9 Apr 2008

5120-12-021-3535

5120-12-195-0840
Mechanical Puller

121950840
0852 2422: RNCC: 3 | RNVC: 2
8522422: RNCC: 5 | RNVC: 2

11 Jan 1983

5120-12-198-7593
Pliers

121987593
2716: RNCC: 3 | RNVC: 2
106725: RNCC: 5 | RNVC: 2

23 Feb 1984

5120-12-193-6666

5120-12-361-6952
Hand Terminal Crimping Tool

123616952
55640.108.766: RNCC: 3 | RNVC: 2
55640.108.766: RNCC: 5 | RNVC: 2
AZ766L: RNCC: 5 | RNVC: 2

4 Nov 2003

5120-12-127-8796
Socket Wrench Adapter

121278796
4607E: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-024-7154

5120-12-149-5866
Socket Wrench

121495866
NO PRIMARY REF 12-149-5866: RNCC: 3 | RNVC: 2
105204: RNCC: 5 | RNVC: 9
1937M24: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-3999
Gewindeschutzkappe

121473999
VG95211-ML-121473999: RNCC: 2 | RNVC: 2
160-88742-02: RNCC: 3 | RNVC: 2
160-88742-02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-9153
Socket Head Screw Key Set

123819153
90-800-06: RNCC: 3 | RNVC: 2

16 Apr 2010

5120-12-377-5773
Ante Mounting Tool

123775773
314706: RNCC: 3 | RNVC: 2
0855-03-39-00/35: RNCC: 5 | RNVC: 2

27 Jan 2009

5120-12-176-7408
Face Spanner Wrench Socket

121767408
EV4-847: RNCC: 3 | RNVC: 2
EV4-847: RNCC: 5 | RNVC: 9

15 Dec 1978

5120-12-133-3900
Hand Earth Boring Auger

121333900
TL5120-0034: RNCC: 2 | RNVC: 2
38014-0-00: RNCC: 3 | RNVC: 2
510046: RNCC: 5 | RNVC: 2
ST510046: RNCC: 5 | RNVC: 2
5120-0034: RNCC: 5 | RNVC: 9
5120-034: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-328-5903
Bearing And Bushing Inserter And Remover

123285903
8375490743/00: RNCC: 3 | RNVC: 2

4 Jun 1992

5120-12-368-8244
Torque Wrench Adapter

123688244
58253004-TCS: RNCC: 3 | RNVC: 2

25 Apr 2006

5120-12-130-2262
Splicing Sleeve Compressing Tool

121302262
Z2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-364-6813
Socket Wrench Socket

123646813
02020017-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-307-2682
Spannklem Aufnahme

123072682
5900001-5410: RNCC: 3 | RNVC: 2

28 May 1986

5120-12-357-7719
Pliers

123577719
266/1: RNCC: 3 | RNVC: 2

22 Jul 2002

5120-12-371-8557
Montierhuelse

123718557
2300264-264100.04.0: RNCC: 3 | RNVC: 2

23 May 2007

5120-12-167-9680
Spanner Wrench

121679680
335914-9012.000: RNCC: 2 | RNVC: 2
335914-9012.000: RNCC: 3 | RNVC: 2
1255-13000W2: RNCC: 5 | RNVC: 2
335914-9012.000: RNCC: 5 | RNVC: 9
335914-9012.000: RNCC: 5 | RNVC: 9
1255-13000W2: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-123-5578
Box Wrench

121235578
L93014: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5511

5120-12-123-5381

5120-12-126-5428
Tachorit Auszieher

121265428
4015891133: RNCC: 3 | RNVC: 2
401589113300: RNCC: 5 | RNVC: 2
4015891133: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-303-2304
Socket Wrench

123032304
33BPN6: RNCC: 3 | RNVC: 9

7 Mar 1985

5120-12-330-7070
Blindni Mundstueck

123307070
10/18: RNCC: 3 | RNVC: 2

28 Jan 1993

5120-12-385-3082
Blacksmith's Anvil

123853082
53.000.014: RNCC: 3 | RNVC: 2
53.000.014: RNCC: 5 | RNVC: 2

20 May 2011

5120-12-147-5867
Wrench Kit

121475867
NO PRIMARY REF 12-147-5867: RNCC: 3 | RNVC: 2
43965: RNCC: 5 | RNVC: 2
0005892107: RNCC: 5 | RNVC: 2
000589210700: RNCC: 5 | RNVC: 2
4498330002: RNCC: 5 | RNVC: 2
2805: RNCC: 5 | RNVC: 9
2805-21: RNCC: 5 | RNVC: 9
2805/21: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-8655
Machinist's Vise

121208655
576B124-100: RNCC: 3 | RNVC: 2
REC0RDDREHBARGR4: RNCC: 5 | RNVC: 9
SUVERDREHBAR: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-151-6516
Mechanical Puller

121516516
23111-7221.00: RNCC: 2 | RNVC: 2
23111-7221.00: RNCC: 3 | RNVC: 2
23111-7221-00: RNCC: 5 | RNVC: 9
1115777: RNCC: 5 | RNVC: 9
23111-7221-00: RNCC: 5 | RNVC: 9
23111-7221.00: RNCC: 5 | RNVC: 9
23111-7221-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-7209
Socket Wrench Socket

123687209
770-LT 10: RNCC: 3 | RNVC: 2
51-10: RNCC: 3 | RNVC: 2
00.49.00.50: RNCC: 5 | RNVC: 2
03020010: RNCC: 5 | RNVC: 2

10 Apr 2006

5120-12-183-1598
Combination Box And Open End Wrench

121831598
13A9-32: RNCC: 3 | RNVC: 2
40481818: RNCC: 5 | RNVC: 2

25 Mar 1980

5120-12-389-3202
Socket Wrench Socket

123893202
001589800900: RNCC: 3 | RNVC: 2
001589800900: RNCC: 5 | RNVC: 2

20 Jun 2012

5120-12-362-4405
Flat Tip Screwdriver

123624405
54.0084.960.21: RNCC: 3 | RNVC: 2
8060VDE-2.5-75: RNCC: 5 | RNVC: 2

25 Feb 2004

5120-12-334-0257
Open End Wrench

123340257
DIN895-18X21: RNCC: 2 | RNVC: 2
895-18X21: RNCC: 3 | RNVC: 2
413311021000: RNCC: 5 | RNVC: 2
658154: RNCC: 5 | RNVC: 2
895-18X21: RNCC: 5 | RNVC: 2

10 Mar 1994

5120-12-147-4009
Dorn

121474009
VG95211-ML-121474009: RNCC: 2 | RNVC: 2
160-88743-06: RNCC: 3 | RNVC: 2
160-88743-06: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-2144
Flat Tip Screwdriver

121262144
4-115-1: RNCC: 3 | RNVC: 2
W359A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-0002
Cable Type Ratchet Lever Puller

121230002
GREIFZUG1250LKW0-25T: RNCC: 3 | RNVC: 2
30352815000: RNCC: 5 | RNVC: 9
5120-0051: RNCC: 5 | RNVC: 9
5120-051: RNCC: 5 | RNVC: 9
5120-21200: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-166-2440
Pliers

121662440
1200009-0282-000: RNCC: 2 | RNVC: 2
1711090903: RNCC: 5 | RNVC: 2
17110 90903: RNCC: 5 | RNVC: 9

19 Aug 1976

5120-12-387-3461
M Indentation Tool

123873461
80996040208: RNCC: 3 | RNVC: 2
80.99604-0208: RNCC: 5 | RNVC: 2

30 Nov 2011

5120-12-328-9062
Mechanical Puller

123289062
18/2: RNCC: 3 | RNVC: 2
18-2: RNCC: 5 | RNVC: 2

1 Jul 1992

5120-12-193-5701
Mechanical Puller

121935701
P-896836-407: RNCC: 3 | RNVC: 2
MAGERD 3483: RNCC: 5 | RNVC: 2
P896836-407: RNCC: 5 | RNVC: 2

4 Aug 1982

5120-12-146-3731
Spanner Wrench

121463731
02164: RNCC: 3 | RNVC: 2
25704-360480.00.0: RNCC: 3 | RNVC: 2
25704-360480-00-0: RNCC: 5 | RNVC: 2
02164: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-0836
Torque Wrench Adapter

121940836
TL5120-0086-680: RNCC: 2 | RNVC: 2
732/40-17: RNCC: 3 | RNVC: 2
58224017: RNCC: 5 | RNVC: 2
7852-8 17: RNCC: 5 | RNVC: 9
21/DCA-17: RNCC: 5 | RNVC: 9
6264110014: RNCC: 5 | RNVC: 9
6630D-17: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-337-1488
Montierdorn

123371488
8523068.004: RNCC: 3 | RNVC: 2
0852 3068.004: RNCC: 5 | RNVC: 2

25 Jan 1995

5120-12-127-3985
Spanner

121273985
60030430100008: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-152-8556

5120-12-355-4419
Box Wrench

123554419
XLE1012A: RNCC: 3 | RNVC: 2
08.06006.1112: RNCC: 5 | RNVC: 2

15 Nov 2001

5120-12-391-0549
Seal Inserter

123910549
F6780507: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-12-368-1969
Socket Wrench Extension

123681969
12010006-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-387-1289
Electrical Contact Remover

123871289
1830-36103: RNCC: 3 | RNVC: 2
80.99606-0663: RNCC: 5 | RNVC: 2
80996060663: RNCC: 5 | RNVC: 2

8 Nov 2011

5120-12-376-3697
Spanner Wrench

123763697
5332571140: RNCC: 3 | RNVC: 2

19 Sep 2008

5120-12-133-3659
Kraftsto Fuehlstab

121333659
942-181: RNCC: 3 | RNVC: 2
5D18690: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-314-6498
Montierhuelse

123146498
E11.49065-0253: RNCC: 3 | RNVC: 2

26 Jul 1988

5120-12-129-4707
Drive Pin Punch

121294707
JDAL20-30-150: RNCC: 3 | RNVC: 2
76387: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-176-7340
Stempel

121767340
VG95211-ML-121767340: RNCC: 2 | RNVC: 2
105-42123W2.02: RNCC: 3 | RNVC: 2
105-42123W2-02: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-159-6428
Socket Wrench Socket

121596428
NO PRIMARY REF 12-159-6428: RNCC: 3 | RNVC: 2
05-01-00-35: RNCC: 5 | RNVC: 9
05010035: RNCC: 5 | RNVC: 9
55-35: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-303-7855
Spanner Wrench

123037855
1200017-111000W3: RNCC: 3 | RNVC: 2

26 Apr 1985

5120-12-123-5304

5120-12-384-3801
Bearing And Bushing Inserter And Remover

123843801
80996170013: RNCC: 3 | RNVC: 2
80.99617-0017: RNCC: 5 | RNVC: 2
80.99617-0013: RNCC: 5 | RNVC: 2

18 Feb 2011

5120-12-135-2055
Screwdriver Bit

121352055
850H5-5-1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-199-8346
Schluesseleinsatz

121998346
31R8: RNCC: 3 | RNVC: 2
62920-150-8: RNCC: 5 | RNVC: 2
624500: RNCC: 5 | RNVC: 2

5 Jun 1984

5120-12-306-6654
Swivel Knob Jeweler's Screwdriver

123066654
2003F-0,11X0,6X14: RNCC: 3 | RNVC: 2
161969: RNCC: 5 | RNVC: 2
2003F0,6: RNCC: 5 | RNVC: 2
2003F-0,11X0.6X14: RNCC: 5 | RNVC: 9
2003F-0,12X0,6X14: RNCC: 5 | RNVC: 9

19 Mar 1986

5120-12-386-0051
Socket Wrench Screwdriver Attachment

123860051
F97-019-0-01400: RNCC: 3 | RNVC: 2

28 Jul 2011

5120-12-380-6512
Torque Wrench

123806512
F30048872: RNCC: 3 | RNVC: 2

17 Nov 2009

5120-12-331-7658
Socket Head Screw Key

123317658
WZ55: RNCC: 3 | RNVC: 2

18 Jun 1993

5120-12-133-6186

5120-12-372-0089
Screw Extractor

123720089
701743: RNCC: 3 | RNVC: 2

11 Jun 2007

5120-12-379-0128
Torque Wrench

123790128
51060003-TCS: RNCC: 3 | RNVC: 2

15 Jun 2009

5120-12-371-6233
Hand Hammer

123716233
2955: RNCC: 3 | RNVC: 2
00.74.19.47: RNCC: 5 | RNVC: 2

26 Apr 2007

5120-12-321-1360
Piston Inserter

123211360
F6347306: RNCC: 3 | RNVC: 2
F603017347306: RNCC: 5 | RNVC: 2
F603017347306: RNCC: 5 | RNVC: 2
F6347306: RNCC: 5 | RNVC: 2
F6347306: RNCC: 5 | RNVC: 2
F603017347306: RNCC: 5 | RNVC: 9

2 Apr 1990

5120-12-365-4820
Bearing And Bushing Inserter And Remover

123654820
T80091139: RNCC: 3 | RNVC: 2

7 Jan 2005

5120-12-362-4254
Mechanical Puller

123624254
1X53 176 786: RNCC: 3 | RNVC: 2
T632G30T0003: RNCC: 5 | RNVC: 2

19 Feb 2004

5120-12-196-6938
Inspection Mirror

121966938
5515T: RNCC: 3 | RNVC: 2

2 Aug 1983

5120-12-122-6816
Combination Box And Open End Wrench

121226816
72: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-120-0718
Digging Pick

121200718
5120-005: RNCC: 2 | RNVC: 2
5120-10572: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-191-1889
Spanner Wrench

121911889
1X56136966: RNCC: 3 | RNVC: 2

18 Jan 1982

5120-12-377-0711
Spanner Wrench

123770711
616886: RNCC: 3 | RNVC: 2

10 Dec 2008

5120-12-170-2612

5120-12-364-9915
Craftsman's Tweezers

123649915
5-125-1: RNCC: 3 | RNVC: 2

20 Nov 2004

5120-12-329-6272
Mechanical Puller Attachment

123296272
0850 1857.008: RNCC: 3 | RNVC: 2
850 1857FC T.8: RNCC: 5 | RNVC: 2
8501857.008: RNCC: 5 | RNVC: 2

10 Sep 1992

5120-12-359-4297
Torque Wrench

123594297
AS576-1833A: RNCC: 3 | RNVC: 2
T622P50T0002: RNCC: 5 | RNVC: 2
T622P5003051: RNCC: 5 | RNVC: 9

5 Feb 2003

5120-12-305-2544
Rohrbieg Glaetteil

123052544
7-1/20-000-150-21441: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-345-9994
Hydraulic Jack Handle

123459994
NO PRIMARY REF 12-345-9994: RNCC: 3 | RNVC: 2
81668070039: RNCC: 5 | RNVC: 2
0107/1: RNCC: 5 | RNVC: 2

28 May 1998

5120-12-369-9207
Socket Head Screw Key Set

123699207
535-180-08: RNCC: 3 | RNVC: 2
H43TX-88: RNCC: 3 | RNVC: 2
00.43.15.47: RNCC: 5 | RNVC: 2
1531425: RNCC: 5 | RNVC: 2

28 Aug 2006

5120-12-373-9034
Inspection Mirror

123739034
060024: RNCC: 3 | RNVC: 2

17 Dec 2007

5120-12-180-3846
Bearing And Bushing Inserter

121803846
343589071500: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-12-363-9051
Bearing And Bushing Inserter

123639051
T670P5001263: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-314-2157
Hand Caulking Tool

123142157
0852 6463: RNCC: 3 | RNVC: 2
8526463: RNCC: 5 | RNVC: 2

17 Jun 1988

5120-12-153-5064
Montagestutzen

121535064
V0M08S: RNCC: 3 | RNVC: 2
101744: RNCC: 5 | RNVC: 2
V0RM0NTAGESTUTZEN8S: RNCC: 5 | RNVC: 2
909129403: RNCC: 5 | RNVC: 2
V0M08S: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-381-8913
Wrecking Bar

123818913
1610450S: RNCC: 3 | RNVC: 2

14 Apr 2010

5120-12-381-9015
Pipe Wrench

123819015
0530625S: RNCC: 3 | RNVC: 2

15 Apr 2010

5120-12-135-4803

5120-12-141-7594

5120-12-334-3802
Pliers

123343802
53.1613.203.10: RNCC: 3 | RNVC: 2

3 May 1994

5120-12-139-3007

5120-12-139-3054
Mechanical Puller

121393054
8205892333: RNCC: 3 | RNVC: 2
003M02000: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-332-5323
Open End Wrench

123325323
3254: RNCC: 3 | RNVC: 2

18 Aug 1993

5120-12-365-5404
Cross Tip Screwdriver

123655404
47301001-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-153-5211
Schluessel

121535211
CH1774-10NM: RNCC: 3 | RNVC: 2
8205891303/00: RNCC: 5 | RNVC: 2
820589130300: RNCC: 5 | RNVC: 2
CH1774-10NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-350-4819
Fuehrungs- Platte

123504819
26-21C1360G003P35: RNCC: 3 | RNVC: 2

5 Apr 2000

5120-12-137-0409
Spanner Wrench

121370409
NO PRIMARY REF 12-137-0409: RNCC: 3 | RNVC: 2
4113S: RNCC: 5 | RNVC: 9
107870: RNCC: 5 | RNVC: 9
3918-40-90: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-9543
Cross Tip Screwdriver

121559543
M257-31: RNCC: 3 | RNVC: 2
JD5120-12-155-9543: RNCC: 5 | RNVC: 2
M257-31: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-9873
Abdrueckvorrichtung

121909873
2168-9930-000: RNCC: 3 | RNVC: 2
2168-9930-010: RNCC: 3 | RNVC: 2
2168-9930-010: RNCC: 5 | RNVC: 2
2168-9930-000: RNCC: 5 | RNVC: 2
2168-9930-000: RNCC: 5 | RNVC: 9
2168-9930-000: RNCC: 5 | RNVC: 9

30 Dec 1981

5120-12-135-8244
Open End Wrench

121358244
W514F: RNCC: 3 | RNVC: 2
35-12-01: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-383-6652
Quick Adjusting Screw Clamp

123836652
TB100: RNCC: 3 | RNVC: 2

23 Nov 2010

5120-12-391-5475
Mounting Punch

123915475
AZ8157T100: RNCC: 3 | RNVC: 2
14100088132: RNCC: 5 | RNVC: 2

19 Mar 2013

5120-12-364-3142
Socket Wrench Socket

123643142
01240009-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-342-6097
Crimping Tool Die

123426097
VG95236T11AA004: RNCC: 2 | RNVC: 2
MRP0840: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-374-7974
Socket Wrench Socket

123747974
4680-3: RNCC: 3 | RNVC: 2

25 Mar 2008

5120-12-180-3929
Hand Screw Starter

121803929
8067-11X145: RNCC: 3 | RNVC: 9

7 Sep 1979

5120-12-166-5687
Spanner Wrench

121665687
K4187-0100: RNCC: 3 | RNVC: 9
K4187: RNCC: 5 | RNVC: 9

24 Sep 1976

5120-12-092-1769

5120-12-311-2673
Mechanical Puller

123112673
335589003300: RNCC: 3 | RNVC: 2

11 Aug 1987

5120-12-360-3749
Aufblasbare Tasche

123603749
416.1046: RNCC: 3 | RNVC: 2

15 May 2003

5120-12-041-2713

5120-12-333-9731
Socket Wrench Handle

123339731
453: RNCC: 3 | RNVC: 2
12100002: RNCC: 5 | RNVC: 2

2 Mar 1994

5120-12-141-3640
Mechanical Puller

121413640
WU77: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-351-8231
Bearing And Bushing Inserter

123518231
1434105500: RNCC: 3 | RNVC: 2

29 Aug 2000

5120-12-134-2755

5120-12-133-3519
Box Wrench

121333519
1300M6X7: RNCC: 3 | RNVC: 2
103980: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-010-9650

5120-12-362-4619
Hand Terminal Crimping Tool

123624619
T3681: RNCC: 3 | RNVC: 2
430020: RNCC: 5 | RNVC: 9

26 Feb 2004

5120-12-133-6178
Einsteck Schluessel

121336178
815-181: RNCC: 3 | RNVC: 2
S642B350: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-386-4332
Pike Pole

123864332
4517: RNCC: 3 | RNVC: 2
5120-00700: RNCC: 6 | RNVC: 9

1 Sep 2011

5120-12-135-5960

5120-12-364-0740
Montierhuelse

123640740
0986617114: RNCC: 3 | RNVC: 2
KDAL 5029: RNCC: 5 | RNVC: 2

18 Aug 2004

5120-12-094-1292

5120-12-151-6555
Richtvorrichtung

121516555
2B2001U1V2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-152-5614
Spanner Wrench

121525614
169101803: RNCC: 3 | RNVC: 2
7101-86-20-10: RNCC: 5 | RNVC: 2
7101-86-20-10: RNCC: 5 | RNVC: 9
7101-86-20.10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-384-3788
Socket Wrench Handle

123843788
8205890451/00: RNCC: 3 | RNVC: 2

18 Feb 2011

5120-12-170-9531
Combination Box And Open End Box Wrench

121709531
100332-17000W1: RNCC: 3 | RNVC: 2
4900072-006000: RNCC: 5 | RNVC: 2
4900072-006000: RNCC: 5 | RNVC: 9
100332-17000W1: RNCC: 5 | RNVC: 9

24 Aug 1977

5120-12-126-1796
Drill Guide

121261796
TL5120-0052-160A: RNCC: 2 | RNVC: 2
1418K: RNCC: 3 | RNVC: 2
104059: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-181-6870
Driftpin

121816870
TK-WT41-4910-001-13: RNCC: 2 | RNVC: 2
10-204: RNCC: 3 | RNVC: 2
VW 10-204: RNCC: 3 | RNVC: 2
2577: RNCC: 3 | RNVC: 2
10-204: RNCC: 3 | RNVC: 9
10-204: RNCC: 5 | RNVC: 2
5745620001: RNCC: 5 | RNVC: 2

10 Dec 1979

5120-12-126-3026
Socket Wrench

121263026
4040M16X17: RNCC: 3 | RNVC: 2
34/16X17: RNCC: 3 | RNVC: 2
645-16X17: RNCC: 3 | RNVC: 2
29-16X17: RNCC: 3 | RNVC: 2
4300005: RNCC: 3 | RNVC: 2
92-16X17: RNCC: 3 | RNVC: 2
107831: RNCC: 5 | RNVC: 2
07600: RNCC: 5 | RNVC: 2
092050: RNCC: 5 | RNVC: 2
1928110015: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-193-0155
Bearing And Bushing Inserter

121930155
601 589 011400: RNCC: 3 | RNVC: 2
601589011400: RNCC: 3 | RNVC: 2

14 Jun 1982

5120-12-150-3930
Mechanical Puller

121503930
1X46104950: RNCC: 3 | RNVC: 2
V104950: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-344-2953
Electronic Equipment Alignment Tool

123442953
1-435: RNCC: 3 | RNVC: 2

14 Oct 1997

5120-12-300-6331
Gl Montierwerkzeug

123006331
2300007-261010.000.0: RNCC: 2 | RNVC: 2
2300007-261010.000.0: RNCC: 3 | RNVC: 2
2300007-261010.000.0: RNCC: 5 | RNVC: 2
2300007-261010.000.0: RNCC: 5 | RNVC: 9

17 Aug 1984

5120-12-329-0681
Claw Bar

123290681
A117.01-500: RNCC: 3 | RNVC: 2
0117010500: RNCC: 5 | RNVC: 2

16 Jul 1992

5120-12-388-0605
Crimping Tool Die

123880605
1181-49101: RNCC: 3 | RNVC: 2
80.99625-0092: RNCC: 5 | RNVC: 2
80996250092: RNCC: 5 | RNVC: 2

22 Feb 2012

5120-12-301-4559
Flat Tip Screwdriver

123014559
NO PRIMARY REF 12-301-4559: RNCC: 3 | RNVC: 2
8002C: RNCC: 5 | RNVC: 9

16 Oct 1984

5120-12-196-0646
Socket Head Screw Key

121960646
CL6089-17-38000: RNCC: 2 | RNVC: 2
CL6089-17-38000: RNCC: 3 | RNVC: 2

25 May 1983

5120-12-126-4920
Saddler's Pegging Awl Blade

121264920
277: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-335-4451
Mechanical Puller

123354451
0852 5105: RNCC: 3 | RNVC: 2
8525105: RNCC: 5 | RNVC: 2

18 Aug 1994

5120-12-306-6650
Hand Contact Burnisher

123066650
912: RNCC: 3 | RNVC: 9

19 Mar 1986

5120-12-384-0382
Rotat Holding Tool

123840382
F6553642: RNCC: 3 | RNVC: 2

13 Jan 2011

5120-12-321-1542
Seal Inserter

123211542
F30278300: RNCC: 3 | RNVC: 2
F30278300: RNCC: 5 | RNVC: 2
F361160278300: RNCC: 5 | RNVC: 2
F30278300: RNCC: 5 | RNVC: 2
F361160278300: RNCC: 5 | RNVC: 2
F361160278300: RNCC: 5 | RNVC: 9

6 Apr 1990

5120-12-120-7713
Hand Scissors Jack

121207713
SH62: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-359-6714
Ausdrueck Gehaeuse

123596714
T623P5003110: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-336-5079
Montierhuelse

123365079
0852 1509: RNCC: 3 | RNVC: 2
8521509: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-388-6061
Drive Pin Punch

123886061
DHSXX05000000A2620: RNCC: 3 | RNVC: 2

4 Apr 2012

5120-12-129-3770
Ausdrueckvorrichtun

121293770
0005890535: RNCC: 3 | RNVC: 2
0005890535: RNCC: 3 | RNVC: 9
000589053500: RNCC: 5 | RNVC: 2
000589053500: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-345-3733
Spanner Wrench

123453733
F3 0274967: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-388-6305
Wrench

123886305
4280145: RNCC: 3 | RNVC: 2
4040674115637: RNCC: 5 | RNVC: 2

5 Apr 2012

5120-12-192-1853
Hebel

121921853
105-82730: RNCC: 3 | RNVC: 2

29 Mar 1982

5120-12-371-1219
Spatula

123711219
986 180 00: RNCC: 3 | RNVC: 2
02.33.98.21: RNCC: 5 | RNVC: 2

14 Feb 2007

5120-12-371-1858
Trowel

123711858
203 160 00: RNCC: 3 | RNVC: 2
02.33.44.64: RNCC: 5 | RNVC: 2

26 Feb 2007

5120-12-021-2458

5120-12-372-5831
Tap Extractor

123725831
33-9B: RNCC: 3 | RNVC: 2
01.98.87.02: RNCC: 5 | RNVC: 2

1 Aug 2007

5120-12-153-5236
Socket Wrench Handle

121535236
NM301-03: RNCC: 3 | RNVC: 2
5615890415/00: RNCC: 5 | RNVC: 2
561589041500: RNCC: 5 | RNVC: 2
NM301-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-316-7031
Ratchet Screwdriver

123167031
52870100: RNCC: 3 | RNVC: 9

2 Feb 1989

5120-12-131-4616
Socket Wrench Socket

121314616
JD5120-12-131-4616: RNCC: 3 | RNVC: 2
108779: RNCC: 5 | RNVC: 9
6700AZ1-4IN: RNCC: 5 | RNVC: 9
54562: RNCC: 5 | RNVC: 9
850AK1-4: RNCC: 5 | RNVC: 9
01430016: RNCC: 5 | RNVC: 9
40ADSQ-1/4: RNCC: 5 | RNVC: 9
40ADSQ1-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-389-5055
Torque Wrench Adapter

123895055
R809228: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-375-8773
Abstimmwerkzeugsatz

123758773
1-160: RNCC: 3 | RNVC: 2

16 Jul 2008

5120-12-358-2000
Mut Sprengwerkzeug

123582000
54-2: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-12-198-4901
Mechanical Puller Attachment

121984901
13-36-39-50-1-4: RNCC: 3 | RNVC: 2

2 Feb 1984

5120-12-301-7151
Hand Terminal Crimping Tool

123017151
169400-0: RNCC: 3 | RNVC: 2

3 Nov 1984

5120-12-329-0659
Socket Head Screw Key

123290659
2300232-991000.028.0: RNCC: 2 | RNVC: 2
2300232-991000.028.0: RNCC: 3 | RNVC: 2

16 Jul 1992

5120-12-368-7100
Socket Wrench Screwdriver Attachment

123687100
3244-TX 9: RNCC: 3 | RNVC: 2
02100009: RNCC: 3 | RNVC: 2
00.47.61.08: RNCC: 5 | RNVC: 2

10 Apr 2006

5120-12-181-1315
Socket Wrench Socket

121811315
1088-10: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-198-7135
Screw Thread Insert Extractor

121987135
VG95211-ML-121987135: RNCC: 2 | RNVC: 2
01500265600: RNCC: 3 | RNVC: 2

22 Feb 1984

5120-12-389-5051
Torque Wrench Adapter

123895051
R819948: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-023-6018

5120-12-330-4480
Mechanical Puller

123304480
0852 0361: RNCC: 3 | RNVC: 2
8520361: RNCC: 5 | RNVC: 2

16 Dec 1992

5120-12-341-4002
St Montierwerkzeug

123414002
1218 8097: RNCC: 3 | RNVC: 2
6.234.0.690.007.6: RNCC: 3 | RNVC: 9
6.234.0.690.007.6: RNCC: 5 | RNVC: 2

30 Aug 1996

5120-12-386-8913
Screwdriver Bit Set And Handle

123868913
0.308.0004: RNCC: 3 | RNVC: 2
0.308.0004: RNCC: 5 | RNVC: 2

13 Oct 2011

5120-12-390-2383
Socket Wrench

123902383
4W774A: RNCC: 3 | RNVC: 2

19 Oct 2012

5120-12-342-8697
Crimping Tool Die

123428697
R70: RNCC: 3 | RNVC: 2

10 Apr 1997

5120-12-347-1870
Montierdorn

123471870
0851 5130: RNCC: 3 | RNVC: 2

10 Nov 1998

5120-12-346-7384
Socket Wrench Socket

123467384
466-12: RNCC: 3 | RNVC: 2
02120012: RNCC: 5 | RNVC: 2

2 Sep 1998

5120-12-156-0836
Ratchet Wrench

121560836
NO PRIMARY REF 12-156-0836: RNCC: 3 | RNVC: 2
SW14-31V: RNCC: 5 | RNVC: 2
31V14: RNCC: 5 | RNVC: 9
210498: RNCC: 5 | RNVC: 9
31V814: RNCC: 5 | RNVC: 9
31V814: RNCC: 5 | RNVC: 9
31V14: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-3543
Mechanical Puller Attachment

123053543
21-0: RNCC: 3 | RNVC: 2

25 Oct 1985

5120-12-340-2201
Seal Inserter And Remover

123402201
2300232-992000.009.0: RNCC: 2 | RNVC: 2
2300232-992000.009.0: RNCC: 3 | RNVC: 2

15 Mar 1996

5120-12-314-6932
Socket Head Screw Key

123146932
334-59: RNCC: 3 | RNVC: 2

29 Jul 1988

5120-12-374-7034
Workpiece Fixture

123747034
60361948: RNCC: 3 | RNVC: 2

10 Mar 2008

5120-12-327-1517
Socket Wrench Set

123271517
NO PRIMARY REF 12-327-1517: RNCC: 3 | RNVC: 2
40AD/10/5: RNCC: 5 | RNVC: 9

6 Dec 1991

5120-12-312-2603
Mechan Druckstueck

123122603
CH1773-8.2NM: RNCC: 3 | RNVC: 2
5615890361/02: RNCC: 5 | RNVC: 2
561589036102: RNCC: 5 | RNVC: 2
561589036106: RNCC: 5 | RNVC: 9
CH1773-8.2NM: RNCC: 5 | RNVC: 9

10 Dec 1987

5120-12-182-0148
Schluesselteil

121820148
009-515.130-013: RNCC: 2 | RNVC: 2
5222-130.013: RNCC: 2 | RNVC: 2
009-515.130-013: RNCC: 3 | RNVC: 2
09-515-130-013: RNCC: 5 | RNVC: 2
5222-130-013: RNCC: 5 | RNVC: 2
009-515-130-013: RNCC: 5 | RNVC: 2
5222-130.013: RNCC: 5 | RNVC: 9

7 Jan 1980

5120-12-360-0130
Crimping Tool Die

123600130
NO PRIMARY REF 12-360-0130: RNCC: 3 | RNVC: 2
VG95236T02A03: RNCC: 5 | RNVC: 9

27 Mar 2003

5120-12-137-3413
Socket Wrench

121373413
NO PRIMARY REF 12-137-3413: RNCC: 3 | RNVC: 2
1945NKBZ7-16: RNCC: 5 | RNVC: 9
105403: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-317-5191
Spanner Wrench

123175191
OS-150: RNCC: 3 | RNVC: 2

14 Apr 1989

5120-12-174-0578
Montagevorrichtung

121740578
2300002-261310.000: RNCC: 2 | RNVC: 2
2300002-261310.000: RNCC: 3 | RNVC: 2
2300002-261310: RNCC: 5 | RNVC: 9

6 Jun 1978

5120-12-132-1655
Socket Wrench

121321655
075135: RNCC: 3 | RNVC: 2
25-50: RNCC: 3 | RNVC: 2
75-50: RNCC: 5 | RNVC: 9
211672: RNCC: 5 | RNVC: 9
25-50: RNCC: 5 | RNVC: 9
25-50: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-361-8308
Inspection Mirror

123618308
591070908: RNCC: 3 | RNVC: 2

21 Nov 2003

5120-12-150-8985

5120-12-353-6053
Abzieh- Und Aufdrue

123536053
CBD45054P01: RNCC: 3 | RNVC: 2

17 Apr 2001

5120-12-090-9648

5120-12-139-3031
Schluesseleinsatz

121393031
8205893507: RNCC: 3 | RNVC: 2
023M04300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-340-2118
Mechanical Puller

123402118
80996066022: RNCC: 3 | RNVC: 2
9200364000: RNCC: 3 | RNVC: 2
920036-4000: RNCC: 5 | RNVC: 2

14 Mar 1996

5120-12-127-7565
Rack Bar Jack

121277565
TK5120-009: RNCC: 2 | RNVC: 2
0830070: RNCC: 3 | RNVC: 2
010KA: RNCC: 5 | RNVC: 2
2836-006: RNCC: 5 | RNVC: 2
2836006: RNCC: 5 | RNVC: 2
TK-KG45-5120-071: RNCC: 5 | RNVC: 9
304-10: RNCC: 5 | RNVC: 9
5120-021-10T: RNCC: 5 | RNVC: 9
5120-01002: RNCC: 6 | RNVC: 9
5120-01002: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-324-7582
Socket Wrench

123247582
5802233-010530.000: RNCC: 2 | RNVC: 2
7800011590: RNCC: 3 | RNVC: 2
5802233-010530.000: RNCC: 5 | RNVC: 9
78000 11590: RNCC: 5 | RNVC: 9

21 Mar 1991

5120-12-354-0200
Montierdorn

123540200
CBD30011G01: RNCC: 3 | RNVC: 2

29 May 2001

5120-12-335-9399
Spanner Wrench

123359399
0851 9791: RNCC: 3 | RNVC: 2
8519791: RNCC: 5 | RNVC: 2

4 Oct 1994

5120-12-134-2631
Schluessel

121342631
029M00500: RNCC: 3 | RNVC: 2
029M01400: RNCC: 5 | RNVC: 2
VM56029: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-137-4633

5120-12-196-2635
Aligning Punch

121962635
01TC33519: RNCC: 3 | RNVC: 2

22 Jun 1983

5120-12-340-4964
Socket Wrench Set

123404964
6219: RNCC: 3 | RNVC: 2

23 Apr 1996

5120-12-365-2921
Montierwerk Huelse

123652921
8098 798 002: RNCC: 3 | RNVC: 2

16 Dec 2004

5120-12-361-1948
Boerdelwer Einsatz

123611948
80996060102: RNCC: 3 | RNVC: 2
80.99606-0102: RNCC: 5 | RNVC: 2

2 Sep 2003

5120-12-157-4192
Spanner Wrench

121574192
776-35-60-5C: RNCC: 3 | RNVC: 2
5800686-9-003: RNCC: 5 | RNVC: 2
5800686-9.003: RNCC: 5 | RNVC: 2
62810-60-5: RNCC: 5 | RNVC: 2
628100-60/5: RNCC: 5 | RNVC: 2
5800686-9-003: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-385-3045
Quick Adjusting Screw Clamp

123853045
50.000.113: RNCC: 3 | RNVC: 2

19 May 2011

5120-12-157-6773
Kabelschuhh Matrize

121576773
B70WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-337-3885
Drive Pin Punch

123373885
MK1640-16: RNCC: 3 | RNVC: 2
7009099: RNCC: 5 | RNVC: 2

22 Feb 1995

5120-12-123-5900

5120-12-192-8048
Bearing And Bushing Inserter

121928048
615 589 00 15 00: RNCC: 3 | RNVC: 2
615589001500: RNCC: 3 | RNVC: 2

26 May 1982

5120-12-315-9858
Adjustable Wrench

123159858
13005: RNCC: 3 | RNVC: 2

13 Dec 1988

5120-12-364-3126
Socket Wrench Socket

123643126
01030006-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-319-4358
Lager- Und Einsatz

123194358
99374347: RNCC: 3 | RNVC: 2

2 Oct 1989

5120-12-168-6372

5120-12-389-5139
Torque Wrench Adapter

123895139
R809293: RNCC: 3 | RNVC: 2

17 Jul 2012

5120-12-344-6034
Socket Wrench

123446034
8019-4A: RNCC: 3 | RNVC: 2

13 Nov 1997

5120-12-356-2859
Aufdrueckwerkzeug

123562859
80996020018: RNCC: 3 | RNVC: 2
80.99602-0018: RNCC: 5 | RNVC: 2

8 Feb 2002

5120-12-310-4157
Gl Montierwerkzeug

123104157
7109131300: RNCC: 3 | RNVC: 2
7-109-13-13-00: RNCC: 5 | RNVC: 2
7109131300: RNCC: 5 | RNVC: 2
600412: RNCC: 5 | RNVC: 2

20 May 1987

5120-12-371-4144
Hand Hammer

123714144
5039.98.2000: RNCC: 3 | RNVC: 2

27 Mar 2007

5120-12-197-7144
Socket Wrench Socket

121977144
80996030261: RNCC: 3 | RNVC: 2
620589010900: RNCC: 3 | RNVC: 2
620 589 01 09 00: RNCC: 5 | RNVC: 2
80996030245: RNCC: 5 | RNVC: 2
620589010900: RNCC: 5 | RNVC: 9

17 Nov 1983

5120-12-369-7461
Montierdorn

123697461
405589051500: RNCC: 3 | RNVC: 2
7083642: RNCC: 5 | RNVC: 2

15 Aug 2006

5120-12-369-7614
Socket Wrench Socket

123697614
366589010700: RNCC: 3 | RNVC: 2
7083637: RNCC: 5 | RNVC: 2

15 Aug 2006

5120-12-126-2039
Richteisen

121262039
NO PRIMARY REF 12-126-2039: RNCC: 3 | RNVC: 2
375-1-4GEB0GEN: RNCC: 5 | RNVC: 2
W36: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-010-9653

5120-12-373-3745
Mechanical Puller Attachment

123733745
BWAC008: RNCC: 3 | RNVC: 2

26 Oct 2007

5120-12-380-1487
Socket Wrench

123801487
79632: RNCC: 3 | RNVC: 2

1 Oct 2009

5120-12-381-8871
Pole Extension

123818871
1202526: RNCC: 3 | RNVC: 2

14 Apr 2010

5120-12-700-4259
Hand Bellows

127004259
FUSZBLASEBALG NVA: RNCC: 2 | RNVC: 2

12 May 1992

5120-12-317-3378
Socket Head Screw Key Set

123173378
060931.4.970.55: RNCC: 3 | RNVC: 2

29 Mar 1989

5120-12-370-3941
Gl Montierwerkzeug

123703941
213: RNCC: 3 | RNVC: 2
7 129 13 15 00 A: RNCC: 5 | RNVC: 2

2 Nov 2006

5120-12-120-6600
Socket Wrench Socket

121206600
900A-1: RNCC: 3 | RNVC: 2
52A1: RNCC: 3 | RNVC: 2
50-6-1: RNCC: 3 | RNVC: 2
03430048: RNCC: 5 | RNVC: 2
00506337: RNCC: 5 | RNVC: 2
043255: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-371-3494
Screwdriver Bit Set And Handle

123713494
527 S4: RNCC: 3 | RNVC: 2
01.73.37.71: RNCC: 5 | RNVC: 2

19 Mar 2007

5120-12-369-0071
Tap And Reamer Wrench

123690071
100-20: RNCC: 3 | RNVC: 2
01.41.66.04: RNCC: 5 | RNVC: 2

11 May 2006

5120-12-355-6658
Machinist's Vise

123556658
51048-225: RNCC: 3 | RNVC: 2
51048-010: RNCC: 5 | RNVC: 2
54.0084.649.11: RNCC: 5 | RNVC: 2

4 Dec 2001

5120-12-314-1012
Hand Hammer

123141012
165-250: RNCC: 3 | RNVC: 2
165-250 MIT HICKORYSTIEL: RNCC: 5 | RNVC: 2

7 Jun 1988

5120-12-192-4733
Socket Head Screw Key

121924733
537152-9104.000: RNCC: 3 | RNVC: 2
537152-9104: RNCC: 5 | RNVC: 9
537152-9104: RNCC: 5 | RNVC: 9
537152-9104.000: RNCC: 5 | RNVC: 9

27 Apr 1982

5120-12-316-7642
Socket Wrench Set

123167642
NO PRIMARY REF 12-316-7642: RNCC: 3 | RNVC: 2
176737: RNCC: 5 | RNVC: 9
3047 VDE: RNCC: 5 | RNVC: 9

9 Feb 1989

5120-12-345-7287
Face Spanner Wrench Socket

123457287
U100-3771-002: RNCC: 3 | RNVC: 2

21 Apr 1998

5120-12-196-6836
Socket Wrench Socket

121966836
7805ZZ-21: RNCC: 3 | RNVC: 2
134733: RNCC: 5 | RNVC: 2
1347338: RNCC: 5 | RNVC: 2
7805ZZ: RNCC: 5 | RNVC: 9

1 Aug 1983

5120-12-140-4972
Ratchet Wrench

121404972
NO PRIMARY REF 12-140-4972: RNCC: 3 | RNVC: 2
109217-9003: RNCC: 5 | RNVC: 9
1109902-012: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-170-1045
Spanner Wrench

121701045
12709-22910W4: RNCC: 3 | RNVC: 2
12709-22910W4: RNCC: 5 | RNVC: 2
12709-22910W4: RNCC: 5 | RNVC: 9

27 Jun 1977

5120-12-310-8883
Mechanical Puller

123108883
15B: RNCC: 3 | RNVC: 2
001589193300: RNCC: 5 | RNVC: 2

6 Jul 1987

5120-12-199-2521
Socket Wrench Socket

121992521
DIN3124-S14X6,3L: RNCC: 2 | RNVC: 2
6800M14: RNCC: 5 | RNVC: 9

6 Apr 1984

5120-12-172-1328
Hand Helical Spring Puller Hook

121721328
2-132: RNCC: 3 | RNVC: 2
5418: RNCC: 3 | RNVC: 2
108437: RNCC: 5 | RNVC: 2

22 Dec 1977

5120-12-325-7411
Pin Inserter And Remover

123257411
4W3226-A: RNCC: 3 | RNVC: 2
4W3226-A: RNCC: 5 | RNVC: 9

4 Jul 1991

5120-12-155-9429
Drive Pin Punch

121559429
NM253-08: RNCC: 3 | RNVC: 2
NM253-08: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-6909
Tire Repair Valve Holding Tool

121206909
5628212: RNCC: 3 | RNVC: 2
022H077: RNCC: 3 | RNVC: 2
5600: RNCC: 5 | RNVC: 2
5180-0028-6D: RNCC: 5 | RNVC: 9
5180-0028FIG1-3: RNCC: 5 | RNVC: 9
5180-028FIG1-3: RNCC: 5 | RNVC: 9
TL5180-0028-6D: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-195-8843
Socket Wrench Socket

121958843
40ADL-1/4: RNCC: 3 | RNVC: 2
A6800DZ-1/4: RNCC: 3 | RNVC: 2
175838: RNCC: 5 | RNVC: 2
01640016: RNCC: 5 | RNVC: 2
6800DZ1-4: RNCC: 5 | RNVC: 9
6800DZ1/4: RNCC: 5 | RNVC: 9

27 Apr 1983

5120-12-193-3329
Blindni Mundstueck

121933329
349590: RNCC: 3 | RNVC: 2

12 Jul 1982

5120-12-384-9555
Cross Tip Screwdriver

123849555
159.1022: RNCC: 3 | RNVC: 2

13 Apr 2011

5120-12-356-7058
Hand Terminal Crimping Tool

123567058
975308190: RNCC: 3 | RNVC: 2

26 Mar 2002

5120-12-371-2313
Mechanical Puller

123712313
1.35/1: RNCC: 3 | RNVC: 2
4036976105551: RNCC: 5 | RNVC: 2
8016070: RNCC: 5 | RNVC: 2

2 Mar 2007

5120-12-134-2665
Mechanical Puller

121342665
004M02800: RNCC: 3 | RNVC: 2
VM70871-1-5: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-364-5647
Open End Wrench

123645647
40061111-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-182-4197
Fuehrungsstueck

121824197
VW436A: RNCC: 3 | RNVC: 9

30 Jan 1980

5120-12-126-5438
Spanner Wrench

121265438
0005896709: RNCC: 3 | RNVC: 2
0005896709: RNCC: 3 | RNVC: 9
000589670900: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-323-4104
Woven Cable Grip

123234104
01527: RNCC: 3 | RNVC: 2

23 Nov 1990

5120-12-311-8520
Mechanical Puller

123118520
0000 890 4400: RNCC: 3 | RNVC: 2

22 Oct 1987

5120-12-363-8428
Bearing And Bushing Inserter

123638428
T671P5001255: RNCC: 3 | RNVC: 2

30 Jul 2004

5120-12-145-9186
Schluessel

121459186
260052000000: RNCC: 3 | RNVC: 2
260052000000: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-129-4534

5120-12-186-3396
Electronic Equipment Alignment Tool

121863396
1-905: RNCC: 3 | RNVC: 2

17 Dec 1980

5120-12-133-3590
Socket Wrench Handle Bar

121333590
2331-440-3: RNCC: 2 | RNVC: 2
2331-440-3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-305-8811
Face Spanner Wrench Socket

123058811
4900059-721340.000.0: RNCC: 2 | RNVC: 2
4900059-721340.000.0: RNCC: 3 | RNVC: 2

30 Dec 1985

5120-12-368-6986
Socket Wrench Extension

123686986
870-6: RNCC: 3 | RNVC: 2
00.47.86.33: RNCC: 5 | RNVC: 2

7 Apr 2006

5120-12-172-6617
Box Wrench

121726617
30-79350-1159: RNCC: 3 | RNVC: 2

8 Feb 1978

5120-12-340-2208
Seal Inserter And Remover

123402208
2300232-992000.007.0: RNCC: 2 | RNVC: 2
2300232-992000.007.0: RNCC: 3 | RNVC: 2

15 Mar 1996

5120-12-354-1602
Drive Pin Punch

123541602
5304370: RNCC: 3 | RNVC: 2
6503.201.10.17.000: RNCC: 5 | RNVC: 2

12 Jun 2001

5120-12-369-7598
Claw Bar

123697598
TL5120-0129: RNCC: 2 | RNVC: 2
A117.01-600: RNCC: 3 | RNVC: 2
02.39.72.13: RNCC: 5 | RNVC: 2
0117010600: RNCC: 5 | RNVC: 2

15 Aug 2006

5120-12-182-5633
Einstellwerkzeug

121825633
8PE122037-00: RNCC: 3 | RNVC: 2
122037-00: RNCC: 5 | RNVC: 2

12 Feb 1980

5120-12-337-2064
Torque Wrench Multiplier

123372064
08.06705-0706: RNCC: 3 | RNVC: 2
008.014: RNCC: 5 | RNVC: 2
008.014: RNCC: 5 | RNVC: 9
08.06705-0706: RNCC: 5 | RNVC: 9

1 Feb 1995

5120-12-192-9112
Spanner Wrench

121929112
4900271-000000-00: RNCC: 2 | RNVC: 2
4900271: RNCC: 3 | RNVC: 2

3 Jun 1982

5120-12-328-6642
Hand Blind Riveter

123286642
54850301: RNCC: 3 | RNVC: 9
VNG250: RNCC: 5 | RNVC: 2

12 Jun 1992

5120-12-198-7381
Socket Head Screw Key

121987381
1997LM19: RNCC: 3 | RNVC: 2

22 Feb 1984

5120-12-360-0172
Lu Montierwerkzeug

123600172
S533I30A1001: RNCC: 3 | RNVC: 2
S533I0001210: RNCC: 5 | RNVC: 9
S533I30A1001: RNCC: 5 | RNVC: 9

28 Mar 2003

5120-12-371-0033
Swivel Knob Jeweler's Screwdriver Set

123710033
24002: RNCC: 3 | RNVC: 2
411-4535: RNCC: 5 | RNVC: 2

25 Jan 2007

5120-12-140-5299
Spanner Wrench

121405299
TK5120-037: RNCC: 2 | RNVC: 2
NM593: RNCC: 3 | RNVC: 2
A-9450-002: RNCC: 3 | RNVC: 2
490139-300-3: RNCC: 5 | RNVC: 9
NM593: RNCC: 5 | RNVC: 9
TK-KG55-5120-554: RNCC: 5 | RNVC: 9
5120-01522: RNCC: 6 | RNVC: 9
5120-01522: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-358-2712
Preformed Packing Inserter

123582712
5X56000093: RNCC: 3 | RNVC: 2
131505: RNCC: 5 | RNVC: 2

7 Oct 2002

5120-12-024-8468

5120-12-387-8067
Mounting To Sleeve

123878067
F6555791: RNCC: 3 | RNVC: 2

31 Jan 2012

5120-12-376-6437
Swivel Knob Jeweler's Screwdriver

123766437
T4880XES410: RNCC: 3 | RNVC: 2

23 Oct 2008

5120-12-364-9581
Swivel Knob Jeweler's Screwdriver

123649581
T4838XESD20: RNCC: 3 | RNVC: 2

18 Nov 2004

5120-12-700-7939
Socket Wrench

127007939
RADKREUZ-OST: RNCC: 2 | RNVC: 2

26 May 1993

5120-12-173-8747
Socket Wrench Crowfoot Attachment

121738747
440-25: RNCC: 3 | RNVC: 2
02190025: RNCC: 5 | RNVC: 2
105583: RNCC: 5 | RNVC: 9
1950M25: RNCC: 5 | RNVC: 9

17 May 1978

5120-12-358-2117
Cross Tip Screwdriver

123582117
6134221: RNCC: 3 | RNVC: 2
6677001: RNCC: 3 | RNVC: 2
613 422 1: RNCC: 5 | RNVC: 2
6139181: RNCC: 5 | RNVC: 9

26 Sep 2002

5120-12-022-7377

5120-12-349-2224
Zangensatz

123492224
2665B-4T: RNCC: 3 | RNVC: 2

11 Oct 1999

5120-12-364-8602
Socket Wrench Crowfoot Attachment

123648602
02200036-TCS: RNCC: 3 | RNVC: 2

9 Nov 2004

5120-12-130-8108
Drive Pin Punch

121308108
TL5120-0024-F: RNCC: 2 | RNVC: 2
NM253-10: RNCC: 3 | RNVC: 2
5120-0024ITEMF: RNCC: 5 | RNVC: 9
5120-024ITEMF: RNCC: 5 | RNVC: 9
TL5120-0024ITEMF: RNCC: 5 | RNVC: 9
NM253-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-336-9790
Screwdriver Bit

123369790
05072710001: RNCC: 3 | RNVC: 2
072710: RNCC: 3 | RNVC: 9
52951-100: RNCC: 5 | RNVC: 2
2110S-1,5X13: RNCC: 5 | RNVC: 2
72710: RNCC: 5 | RNVC: 9

4 Jan 1995

5120-12-370-4440
Ratchet Wrench Set

123704440
96838108: RNCC: 3 | RNVC: 2

8 Nov 2006

5120-12-188-4597
Torque Wrench

121884597
TL5120-0084-020: RNCC: 2 | RNVC: 2
BW4600-05: RNCC: 3 | RNVC: 2
730/2BW: RNCC: 3 | RNVC: 2
5120700062: RNCC: 5 | RNVC: 2
6285CT: RNCC: 5 | RNVC: 9
50180002: RNCC: 5 | RNVC: 9
730-2: RNCC: 5 | RNVC: 9
730/2: RNCC: 5 | RNVC: 9
65721-2L: RNCC: 5 | RNVC: 9

13 Jul 1981

5120-12-123-5717
Socket Wrench Socket

121235717
4014 42: RNCC: 3 | RNVC: 2
1000Z-42: RNCC: 3 | RNVC: 2
TVA5120-2-263-024: RNCC: 5 | RNVC: 1
1000Z42: RNCC: 5 | RNVC: 2
12110: RNCC: 5 | RNVC: 2
2389110032: RNCC: 5 | RNVC: 2
TVA5120-2-263-024-1.1.62: RNCC: 5 | RNVC: 2
55-42: RNCC: 5 | RNVC: 9
110594: RNCC: 5 | RNVC: 9
8900DM42: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-139-3614
Open End Wrench

121393614
GF165071: RNCC: 3 | RNVC: 2
100139-070000-04: RNCC: 5 | RNVC: 2
F1311-650710: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-156-1624
Screw Extractor

121561624
M457-01: RNCC: 3 | RNVC: 2
M457-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-329-9927
Spanner Wrench

123299927
1X56 136 711: RNCC: 3 | RNVC: 2
1X56136711: RNCC: 5 | RNVC: 2
V136711: RNCC: 5 | RNVC: 9

20 Oct 1992

5120-12-010-1536

5120-12-314-4707
Tool Handle Wedge

123144707
370-KH6: RNCC: 3 | RNVC: 2
KH6: RNCC: 5 | RNVC: 2

9 Jul 1988

5120-12-149-4394
Au Fuehrungsstueck

121494394
25704-360300.09.0: RNCC: 2 | RNVC: 2
25704-360300.09.0: RNCC: 3 | RNVC: 2
25704-360300.09.0: RNCC: 3 | RNVC: 2
25704-360300-09-0: RNCC: 5 | RNVC: 2
25704-360300-09-0: RNCC: 5 | RNVC: 2
25704-360300-09-0: RNCC: 5 | RNVC: 9
25704-360300.09.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-306-9679
Torque Wrench Adapter

123069679
731A/40-1: RNCC: 3 | RNVC: 2
58614048: RNCC: 5 | RNVC: 2
174009: RNCC: 5 | RNVC: 9
7852-Z7-1: RNCC: 5 | RNVC: 9
7852/7Z1: RNCC: 5 | RNVC: 9

22 Apr 1986

5120-12-359-9460
Rivet Bucking Bar

123599460
1000042-195400.08: RNCC: 3 | RNVC: 2

24 Mar 2003

5120-12-359-8097
Ausdrueck Gehaeuse

123598097
T622P3009101: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-12-351-8232
Bearing And Bushing Inserter

123518232
1434105600: RNCC: 3 | RNVC: 2

29 Aug 2000

5120-12-350-9183
Spatula

123509183
8361: RNCC: 3 | RNVC: 2

5 Jun 2000

5120-12-173-5112
Spanner Wrench

121735112
532008G8W5: RNCC: 3 | RNVC: 2
532008G8W5: RNCC: 5 | RNVC: 2
532008G8W5: RNCC: 5 | RNVC: 9
532008G8W5: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-12-342-0113
Montierdorn

123420113
112700: RNCC: 3 | RNVC: 2
112700: RNCC: 5 | RNVC: 2
0112700: RNCC: 5 | RNVC: 9

29 Nov 1996

5120-12-199-5253
Hand-Operated Grommet And Eyelet Press

121995253
WZ71: RNCC: 3 | RNVC: 2
WZ71: RNCC: 5 | RNVC: 9

8 May 1984

5120-12-133-4643

5120-12-023-1926

5120-12-382-7399
Screwdriver Bit

123827399
05060186001: RNCC: 3 | RNVC: 2
867/4ZTX10X89: RNCC: 5 | RNVC: 2

3 Aug 2010

5120-12-041-2705

5120-12-380-1955
Socket Head Screw Key

123801955
T4718ESD09: RNCC: 3 | RNVC: 2
4718ESD TX09X70: RNCC: 5 | RNVC: 2

6 Oct 2009

5120-12-390-2386
Socket Wrench Handle Bar

123902386
4W826B: RNCC: 3 | RNVC: 2

19 Oct 2012

5120-12-371-3564
Socket Wrench Screwdriver Attachment

123713564
3510-INL 5X180: RNCC: 3 | RNVC: 2
00.47.19.63: RNCC: 5 | RNVC: 2

20 Mar 2007

5120-12-358-2989
Mechanical Puller

123582989
CH1998/118: RNCC: 3 | RNVC: 2
1221 7140: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-12-362-3163
Torque Wrench Adapter

123623163
2446-STT 340: RNCC: 3 | RNVC: 2
2446-STT 340: RNCC: 5 | RNVC: 2

5 Feb 2004

5120-12-364-5641
Open End Wrench

123645641
40060505-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-191-6686
Mechanical Puller Adapter

121916686
41-1180-0300.006.0: RNCC: 3 | RNVC: 2
41-1180-0300.006.0: RNCC: 5 | RNVC: 9

23 Feb 1982

5120-12-153-7948
Inspection Mirror

121537948
10301: RNCC: 3 | RNVC: 2
CH1772-1: RNCC: 3 | RNVC: 2
820589206100: RNCC: 5 | RNVC: 2
820589206100: RNCC: 5 | RNVC: 2
8205892061/00: RNCC: 5 | RNVC: 2
CH1772-1: RNCC: 5 | RNVC: 9
NSK-30306D: RNCC: 5 | RNVC: 9
820589206100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-4828
Spanner Wrench

123124828
9230-600W1: RNCC: 3 | RNVC: 2

12 Jan 1988

5120-12-133-3877
Combination Box And Open End Wrench

121333877
14A9-16: RNCC: 3 | RNVC: 2
87AF9-16: RNCC: 3 | RNVC: 2
1952Z9-16: RNCC: 3 | RNVC: 2
40503434: RNCC: 5 | RNVC: 2
87AF9/16: RNCC: 5 | RNVC: 2
105753: RNCC: 5 | RNVC: 2
603A-9/16: RNCC: 5 | RNVC: 9
603A9-16: RNCC: 5 | RNVC: 9
1952Z/9/16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-3650
Socket Wrench Screwdriver Attachment

123713650
3510-IN 10: RNCC: 3 | RNVC: 2
00.47.26.70: RNCC: 5 | RNVC: 2

20 Mar 2007

5120-12-328-6967
Bearing And Bushing Inserter

123286967
F6279903: RNCC: 3 | RNVC: 2
F602000279903: RNCC: 5 | RNVC: 2

16 Jun 1992

5120-12-373-2828
Pliers

123732828
109236: RNCC: 3 | RNVC: 2

17 Oct 2007

5120-12-176-7446
Dorn Griff

121767446
005500: RNCC: 3 | RNVC: 9

15 Dec 1978

5120-12-345-3727
Montierhuelse

123453727
F6 279439: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-194-9520
Spanner Wrench

121949520
1X56136496: RNCC: 3 | RNVC: 2

21 Dec 1982

5120-12-163-5267
Spanner Wrench

121635267
60600000: RNCC: 3 | RNVC: 2
606 000 00: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-120-1681
Spanner Wrench

121201681
1323016: RNCC: 3 | RNVC: 2
RAR1931: RNCC: 5 | RNVC: 2
1323016: RNCC: 5 | RNVC: 9
CH6718: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-5131

5120-12-141-5648

5120-12-368-6730
Socket Wrench Screwdriver Attachment

123686730
3500-IS0,8: RNCC: 3 | RNVC: 2
00.47.36.80: RNCC: 5 | RNVC: 2

5 Apr 2006

5120-12-127-9018
Socket Head Screw Key

121279018
22503: RNCC: 3 | RNVC: 2
1997MB3: RNCC: 5 | RNVC: 9
1997MB3: RNCC: 5 | RNVC: 9
105948: RNCC: 5 | RNVC: 9
C 5701 998: RNCC: 5 | RNVC: 9
44802: RNCC: 5 | RNVC: 9
1997MB3: RNCC: 5 | RNVC: 9
1997MB3: RNCC: 5 | RNVC: 9
C 5701 998: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-324-4477
Grund Schraubstock

5120-12-184-3618
Flat Tip Screwdriver

121843618
NO PRIMARY REF 12-184-3618: RNCC: 3 | RNVC: 2
8010-1-6-100: RNCC: 5 | RNVC: 9

19 Jul 1980

5120-12-367-6343
Rohr- Zange

123676343
7.0155: RNCC: 3 | RNVC: 2
03.29.42.59: RNCC: 5 | RNVC: 2

15 Sep 2005

5120-12-172-5289
Spanner Wrench

121725289
773380: RNCC: 3 | RNVC: 9

23 Jan 1978

5120-12-177-5848
Montagewerkzeug

121775848
331800: RNCC: 3 | RNVC: 9

7 Feb 1979

5120-12-335-3160
Schluesseleinsatz

123353160
0852 4101: RNCC: 3 | RNVC: 2
8524101: RNCC: 5 | RNVC: 2

9 Aug 1994

5120-12-341-3951
Eindrueckwerkzeug

123413951
287.68.360: RNCC: 3 | RNVC: 9

30 Aug 1996

5120-12-381-7057
Pull And Press Tool

123817057
901C990035.000.0: RNCC: 2 | RNVC: 2
901C990035.000.0: RNCC: 3 | RNVC: 2

19 Mar 2010

5120-12-167-9683
Spanner Wrench

121679683
335914-9016.000: RNCC: 2 | RNVC: 2
335914-9016.000: RNCC: 3 | RNVC: 2
1255-20000W3: RNCC: 5 | RNVC: 2
335914-9016.000: RNCC: 5 | RNVC: 9
1255-20000W3: RNCC: 5 | RNVC: 9
335914-9016.000: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-340-4887
Electronic Equipment Alignment Tool

123404887
1-605: RNCC: 3 | RNVC: 2

23 Apr 1996

5120-12-005-0025

5120-12-126-3302
Hand Hammer

121263302
0051020500: RNCC: 3 | RNVC: 2
631A123-500: RNCC: 3 | RNVC: 2
52942-7-0: RNCC: 5 | RNVC: 2
51.02-500: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-339-9696
Seal Inserter

123399696
5070784: RNCC: 3 | RNVC: 2
698-461-0030: RNCC: 5 | RNVC: 2

7 Feb 1996

5120-12-188-3807
Socket Head Screw Key

121883807
053098: RNCC: 3 | RNVC: 2
WZ-84: RNCC: 5 | RNVC: 2

6 Jul 1981

5120-12-129-1749
Justier Stift

121291749
709108-0111.000: RNCC: 3 | RNVC: 2
709108-0111.000: RNCC: 5 | RNVC: 9
709108-111: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-5084
Socket Wrench

121815084
131540: RNCC: 3 | RNVC: 2
191208: RNCC: 5 | RNVC: 2
131540: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-322-1390
Face Spanner Wrench Socket

123221390
214 462.0: RNCC: 3 | RNVC: 2
NO. 214.462.0: RNCC: 5 | RNVC: 2

27 Jul 1990

5120-12-305-6625
Ausdrueckwerkzeug

123056625
1 M 962-B: RNCC: 3 | RNVC: 2
1 M 962-B: RNCC: 5 | RNVC: 9

3 Dec 1985

5120-12-165-6307
Dorn

121656307
310-4910: RNCC: 3 | RNVC: 2

9 Jun 1976

5120-12-310-5397
Bearing And Bushing Inserter

123105397
80996170057: RNCC: 3 | RNVC: 2
80.99617.0057: RNCC: 5 | RNVC: 2

29 May 1987

5120-12-141-2557

5120-12-044-4901

5120-12-333-4665
Mechanical Puller Attachment

123334665
02.0125.04.00: RNCC: 3 | RNVC: 2
0201250400: RNCC: 5 | RNVC: 2

20 Dec 1993

5120-12-366-9071
W Spannvorrichtung

123669071
0986611123: RNCC: 3 | RNVC: 2

21 Jun 2005

5120-12-373-4491
Hand Hammer

123734491
248 H-30: RNCC: 3 | RNVC: 2
4010883886826: RNCC: 5 | RNVC: 2
8868230: RNCC: 5 | RNVC: 2

5 Nov 2007

5120-12-191-8260
Pinzettensatz

121918260
5570/7: RNCC: 3 | RNVC: 2

8 Mar 1982

5120-12-344-6268
Socket Wrench

123446268
05.364.15.10.0: RNCC: 3 | RNVC: 2

18 Nov 1997

5120-12-354-4745
Socket Head Screw Key

123544745
624800-TX15: RNCC: 3 | RNVC: 2
62480-TX15: RNCC: 5 | RNVC: 9

17 Jul 2001

5120-12-178-9641
Tool Handle Wedge

121789641
6798-6: RNCC: 3 | RNVC: 9
3575-5: RNCC: 5 | RNVC: 9

28 May 1979

5120-12-150-3918
P Haltevorrichtung

121503918
1X46907922: RNCC: 3 | RNVC: 2
V90792-2: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-4992
Hand Rivet Set

121234992
30675: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-358-2025
Hand Hammer

123582025
51180510: RNCC: 3 | RNVC: 2
957416: RNCC: 5 | RNVC: 2

26 Sep 2002

5120-12-373-8881
Mechan Druckstueck

123738881
80996060609: RNCC: 3 | RNVC: 2
80.99606-0609: RNCC: 5 | RNVC: 2

17 Dec 2007

5120-12-338-2566
Spanner Wrench

123382566
0793-W41-001.01: RNCC: 3 | RNVC: 2

12 Jun 1995

Load More Results