What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 33 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 33 of 62

5120-12-371-6375
Claw Bar

123716375
0117010800: RNCC: 3 | RNVC: 2
02.39.73.14: RNCC: 5 | RNVC: 2
A117.01-800: RNCC: 5 | RNVC: 2

27 Apr 2007

5120-12-126-1565
Shovel Handle

121261565
NO PRIMARY REF 12-126-1565: RNCC: 3 | RNVC: 2
CY740DIN20152ESCHE: RNCC: 5 | RNVC: 9
CY-740DIN20152-ES: RNCC: 5 | RNVC: 9
DIN20152-CY-740-ES: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-193-9087
Ausdru Grundplatte

121939087
105-31711W2.04: RNCC: 3 | RNVC: 2
105-31711W2-04: RNCC: 5 | RNVC: 2

13 Sep 1982

5120-12-179-9478
Einpreszwerkzeug

121799478
VG95211-ML-121799478: RNCC: 2 | RNVC: 2
105-42124W1: RNCC: 3 | RNVC: 2

9 Aug 1979

5120-12-150-3956
Dorn

121503956
1X46104944: RNCC: 3 | RNVC: 2
V104944: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-041-5671

5120-12-185-0857
Socket Wrench

121850857
P-895149-405: RNCC: 3 | RNVC: 2
P895149-405: RNCC: 5 | RNVC: 2
MAGERD 2730: RNCC: 5 | RNVC: 9

9 Sep 1980

5120-12-158-6259
Flat Tip Screwdriver

121586259
1448-8: RNCC: 3 | RNVC: 2
14480008: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-317-1035
Hand Tube Flaring Punch

123171035
MOS-L 8-S: RNCC: 3 | RNVC: 2
MOS-I 8-S: RNCC: 5 | RNVC: 9

10 Mar 1989

5120-12-332-6141
Spanner Wrench

123326141
532117-8107.902: RNCC: 3 | RNVC: 2
532117-8107.902: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-356-7965
Open End Wrench

123567965
029120602: RNCC: 3 | RNVC: 2
029120601: RNCC: 5 | RNVC: 9

8 Apr 2002

5120-12-333-5668
Seal Inserter

123335668
1842601: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-140-9566
Schluessel

121409566
RP312-09: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-376-6497
Mechanical Puller

123766497
2254002100000: RNCC: 3 | RNVC: 2

24 Oct 2008

5120-12-355-4991
Drive Pin Punch

123554991
5555291: RNCC: 3 | RNVC: 2

20 Nov 2001

5120-12-392-2954
Pipe Wrench

123922954
31360: RNCC: 3 | RNVC: 2

23 May 2013

5120-12-193-3612
Face Spanner Wrench Socket

121933612
105-45051W4: RNCC: 3 | RNVC: 2

13 Jul 1982

5120-12-328-1198
Piston Inserter

123281198
74711-06085: RNCC: 3 | RNVC: 2

8 Apr 1992

5120-12-123-5106

5120-12-020-5032

5120-12-135-7845
Schluessel

121357845
26-50-30-4: RNCC: 3 | RNVC: 2
26-50-30-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-195-8847
Socket Wrench Socket

121958847
A6800DZ-7/16: RNCC: 3 | RNVC: 2
40ADL-7/16: RNCC: 3 | RNVC: 2
180388: RNCC: 5 | RNVC: 2
6800DZ7-16: RNCC: 5 | RNVC: 9
6800DZ7/16: RNCC: 5 | RNVC: 9

27 Apr 1983

5120-12-366-4578
Ha Aufbrech Ramme

123664578
TL5120-0127-010: RNCC: 2 | RNVC: 2
JD5120-00142: RNCC: 3 | RNVC: 2
TL5120-0127: RNCC: 5 | RNVC: 9
5120-00142: RNCC: 6 | RNVC: 9

26 Apr 2005

5120-12-133-9667

5120-12-191-3792
Ein- Und Ausbauvorr

121913792
1206 9073: RNCC: 3 | RNVC: 2
CH1992/22: RNCC: 3 | RNVC: 2
3.601.0.018.029.6: RNCC: 5 | RNVC: 9
1206 9073: RNCC: 5 | RNVC: 9
3.601.0.018.029.6: RNCC: 5 | RNVC: 9
12069073: RNCC: 5 | RNVC: 9
3-601-0-018-029-6: RNCC: 5 | RNVC: 9

28 Jan 1982

5120-12-150-4289
Mechanical Puller

121504289
838589033300: RNCC: 3 | RNVC: 2
8385890333: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-384-3253
Seal Inserter

123843253
F30378883: RNCC: 3 | RNVC: 2

14 Feb 2011

5120-12-366-9515
Auswechs Klemmteil

123669515
0986611575: RNCC: 3 | RNVC: 2

23 Jun 2005

5120-12-186-7598
Bearing And Bushing Inserter

121867598
05000261142: RNCC: 3 | RNVC: 2

2 Feb 1981

5120-12-156-3115
Open End Box Wrench

121563115
149126201: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-336-5098
Driftpin

123365098
0851 7704: RNCC: 3 | RNVC: 2
8517704: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-169-3190
Klemmvorrichtung

121693190
66838300: RNCC: 3 | RNVC: 2

4 May 1977

5120-12-322-5188
Socket Wrench

123225188
8100397-500: RNCC: 2 | RNVC: 2
8100397-500: RNCC: 5 | RNVC: 2

29 Aug 1990

5120-12-324-4723
Drive Pin Punch

123244723
335910-0107.000: RNCC: 2 | RNVC: 2
335910-0107.000: RNCC: 3 | RNVC: 2
335910-0107.000: RNCC: 5 | RNVC: 9

20 Feb 1991

5120-12-364-7417
Ratchet Wrench

123647417
25LO-14X15: RNCC: 3 | RNVC: 2
41151415: RNCC: 5 | RNVC: 2

27 Oct 2004

5120-12-156-1597
Box Wrench

121561597
NM288-02: RNCC: 3 | RNVC: 2
NM288-02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-394-6026
Open End Wrench

123946026
F30451115: RNCC: 3 | RNVC: 2

18 Dec 2013

5120-12-183-5479
Drive Pin Punch

121835479
1000042-195800: RNCC: 3 | RNVC: 2
MAGERD 7654: RNCC: 5 | RNVC: 9

26 Apr 1980

5120-12-147-1303
Ventilla Auszieher

121471303
053906: RNCC: 3 | RNVC: 2
WZ49: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-379-1968
Mecha Ejector Tool

123791968
105-42123W4: RNCC: 3 | RNVC: 2

2 Jul 2009

5120-12-192-7100
Bolzen

121927100
01TC33562: RNCC: 3 | RNVC: 2

17 May 1982

5120-12-020-5463

5120-12-094-5848

5120-12-341-1593
Screwdriver Bit

123411593
ITX20-T20: RNCC: 3 | RNVC: 2
44KTX-T20: RNCC: 3 | RNVC: 2
01350020: RNCC: 5 | RNVC: 2

2 Aug 1996

5120-12-126-2157
Vise Jaw Caps

121262157
51071030: RNCC: 3 | RNVC: 2
4304-125: RNCC: 5 | RNVC: 2
51071: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-5817
Socket Wrench Handle Bar

123885817
BLZXX02000080A2619: RNCC: 3 | RNVC: 2

3 Apr 2012

5120-12-342-6103
Crimping Tool Die

123426103
VG95236T11AA104: RNCC: 2 | RNVC: 2
MRP0846: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-342-6485
Seal Inserter

123426485
606589001400: RNCC: 3 | RNVC: 2

11 Mar 1997

5120-12-141-0314
Lamp Cap Extractor

121410314
LTA110Z3: RNCC: 3 | RNVC: 2
1302: RNCC: 3 | RNVC: 2
LTA110Z3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-331-5906
Schluessel

123315906
18.738: RNCC: 3 | RNVC: 9

25 May 1993

5120-12-327-1563
Aligning Punch

123271563
01TC33515: RNCC: 3 | RNVC: 2

9 Dec 1991

5120-12-145-6401
Cable Type Ratchet Lever Puller

121456401
001-400: RNCC: 3 | RNVC: 2
001-400: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-390-2076
Bearing And Bushing Inserter

123902076
F30372729: RNCC: 3 | RNVC: 2

17 Oct 2012

5120-12-002-0653

5120-12-023-6046

5120-12-199-2678
Spanner Wrench

121992678
31887999: RNCC: 3 | RNVC: 2
31883010: RNCC: 5 | RNVC: 9

6 Apr 1984

5120-12-387-6845
Mechanical Puller

123876845
F30379315: RNCC: 3 | RNVC: 2

24 Jan 2012

5120-12-381-5254
Flat Tip Screwdriver

123815254
500 559 10: RNCC: 3 | RNVC: 2
159.1107: RNCC: 3 | RNVC: 2
4007157506955: RNCC: 5 | RNVC: 2

26 Feb 2010

5120-12-133-4566

5120-12-369-9225
Trowel

123699225
654 190 00: RNCC: 3 | RNVC: 2
654-190: RNCC: 5 | RNVC: 2
02.33.33.53: RNCC: 5 | RNVC: 2

28 Aug 2006

5120-12-196-1586
Socket Head Screw Key

121961586
LN-3MM: RNCC: 3 | RNVC: 2
906-3: RNCC: 3 | RNVC: 2
42192: RNCC: 5 | RNVC: 2
42900503: RNCC: 5 | RNVC: 2
42182: RNCC: 5 | RNVC: 9
4219: RNCC: 5 | RNVC: 9
62615-3: RNCC: 5 | RNVC: 9
1997MBL3: RNCC: 5 | RNVC: 9

7 Jun 1983

5120-12-147-4001
Gewindeschutzkappe

121474001
VG95211-ML-121474001: RNCC: 2 | RNVC: 2
160-88742-05: RNCC: 3 | RNVC: 2
160-88742-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5068
Open End Wrench

30 May 1969

5120-12-369-3970
Machinist's Vise

123693970
10816 UND 10617: RNCC: 3 | RNVC: 2
00.10.01.31: RNCC: 5 | RNVC: 2

29 Jun 2006

5120-12-123-0241
Cable Type Ratchet Lever Puller

121230241
000-001: RNCC: 3 | RNVC: 2
000-001: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-385-5242
Socket Wrench Set

123855242
918.0623: RNCC: 3 | RNVC: 2
391413314304: RNCC: 6 | RNVC: 9

10 Jun 2011

5120-12-166-0406
Refrigeration Valve Stem Wrench Socket

121660406
R6810M5: RNCC: 3 | RNVC: 2
108891: RNCC: 5 | RNVC: 2

24 Jul 1976

5120-12-120-0007
Wire Pike

121200007
5895-004-1: RNCC: 2 | RNVC: 2
5120-30172: RNCC: 6 | RNVC: 9
5120-30172: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-090-1462

5120-12-380-6328
Machinist's Vise

123806328
071467102: RNCC: 3 | RNVC: 2
A071467102: RNCC: 5 | RNVC: 2

16 Nov 2009

5120-12-166-8277
Hand-Operated Grommet And Eyelet Press

121668277
PICC0L0III: RNCC: 3 | RNVC: 2

21 Oct 1976

5120-12-325-6655
Screwdriver Bit

123256655
5105.020.03.04: RNCC: 3 | RNVC: 2
7820353134: RNCC: 5 | RNVC: 2
78203 53134: RNCC: 5 | RNVC: 9

27 Jun 1991

5120-12-374-4522
Hand Hammer

123744522
2730-51000: RNCC: 3 | RNVC: 2

19 Feb 2008

5120-12-171-9963
Zeiger Abheber

121719963
4263004: RNCC: 3 | RNVC: 2
3614: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-377-1184
Quick Adjusting Screw Clamp

123771184
STB150M: RNCC: 3 | RNVC: 2

11 Dec 2008

5120-12-344-1065
Quick Adjusting Screw Clamp

123441065
TG60S12: RNCC: 3 | RNVC: 2
00.20.38.01: RNCC: 5 | RNVC: 2

11 Sep 1997

5120-12-388-0323
Crimping Tool Die

123880323
1185-08101: RNCC: 3 | RNVC: 2
80.99625-0101: RNCC: 5 | RNVC: 2
80996250101: RNCC: 5 | RNVC: 2

17 Feb 2012

5120-12-181-3540
Open End Wrench

121813540
DIN3114-80: RNCC: 2 | RNVC: 2
80DIN3114: RNCC: 5 | RNVC: 2

14 Nov 1979

5120-12-182-4730
Socket Wrench Screwdriver Attachment

121824730
1000089-92000.13: RNCC: 3 | RNVC: 2
1000089-92000-13: RNCC: 5 | RNVC: 9

6 Feb 1980

5120-12-315-7902
Spanner Wrench

123157902
C42080-A46-B47: RNCC: 2 | RNVC: 2
C42080-A46-B47: RNCC: 3 | RNVC: 2

26 Nov 1988

5120-12-156-1568
Socket Wrench Socket

121561568
NM293-11: RNCC: 3 | RNVC: 2
NM293-11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-342-2280
Bearing And Bushing Inserter And Remover

123422280
80996060237: RNCC: 3 | RNVC: 2
80.99606-0237: RNCC: 5 | RNVC: 2

8 Jan 1997

5120-12-368-8427
Socket Wrench Screwdriver Attachment

123688427
3230-XZNL 10X140: RNCC: 3 | RNVC: 2
00.50.61.17: RNCC: 5 | RNVC: 2

27 Apr 2006

5120-12-175-5950
Torque Wrench

121755950
73NMR3: RNCC: 3 | RNVC: 2
96502603: RNCC: 5 | RNVC: 2

3 Oct 1978

5120-12-374-3993
Torque Wrench Adapter

123743993
58620007-TCS: RNCC: 3 | RNVC: 2

13 Feb 2008

5120-12-311-0937
Bearing And Bushing Inserter

123110937
363589021500: RNCC: 3 | RNVC: 2

24 Jul 1987

5120-12-364-6306
Socket Wrench Crowfoot Attachment

123646306
02190027-TCS: RNCC: 3 | RNVC: 2

15 Oct 2004

5120-12-305-3545
Mechanical Puller Attachment

123053545
21-01: RNCC: 3 | RNVC: 2

25 Oct 1985

5120-12-378-1510
Mechan Mating Part

123781510
2040-9958-020: RNCC: 3 | RNVC: 2

16 Mar 2009

5120-12-173-1716
Spanner Wrench

121731716
V7001-004-924-15: RNCC: 3 | RNVC: 2
V7001-004-924-15: RNCC: 5 | RNVC: 2

22 Mar 1978

5120-12-193-6673
Werkzeugausstattung

121936673
C74451-Z1025-U160: RNCC: 3 | RNVC: 2

18 Aug 1982

5120-12-144-5318
Spanner Wrench

121445318
0003-3685-000: RNCC: 3 | RNVC: 2
0003-3685-000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-319-3636
Montierhuelse

123193636
99374376: RNCC: 3 | RNVC: 2

26 Sep 1989

5120-12-198-7380
Socket Head Screw Key

121987380
1997LM17: RNCC: 3 | RNVC: 2

22 Feb 1984

5120-12-198-9869
Face Spanner Wrench Socket

121989869
01TC33013: RNCC: 3 | RNVC: 2

20 Mar 1984

5120-12-126-3037

5120-12-123-5422
Box Wrench

121235422
DIN837-B27X32: RNCC: 2 | RNVC: 2
085130: RNCC: 3 | RNVC: 2
4-27X32: RNCC: 3 | RNVC: 2
27X32DIN837: RNCC: 5 | RNVC: 2
85-27X32: RNCC: 5 | RNVC: 2
DIN837-27X32: RNCC: 5 | RNVC: 2
237213: RNCC: 5 | RNVC: 9
4-27X32: RNCC: 5 | RNVC: 9
4-27X32: RNCC: 5 | RNVC: 9
27X32DIN837GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-0590
D Eindrueck- Huelse

121460590
23114-7101-07: RNCC: 2 | RNVC: 2
510158: RNCC: 3 | RNVC: 2
510158: RNCC: 5 | RNVC: 9
510158: RNCC: 5 | RNVC: 9
23114-7101-07: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-383-1875
Seal Inserter

123831875
F30378873: RNCC: 3 | RNVC: 2

23 Sep 2010

5120-12-365-9727
Socket Head Screw Key

123659727
43150150-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-384-5015
Leveling-Support Jack

123845015
2451700002: RNCC: 3 | RNVC: 2

1 Mar 2011

5120-12-358-1809
Combination Box And Open End Wrench Set

123581809
205S 12MSB: RNCC: 3 | RNVC: 2

24 Sep 2002

5120-12-127-2133

5120-12-330-8019
Flat Tip Screwdriver

123308019
537239-8577.000: RNCC: 3 | RNVC: 2
537239-8577.000: RNCC: 5 | RNVC: 9

10 Feb 1993

5120-12-190-9377
Seal Inserter

121909377
61974400: RNCC: 3 | RNVC: 2
619 744 00: RNCC: 5 | RNVC: 9
6197440050: RNCC: 5 | RNVC: 9

23 Dec 1981

5120-12-164-2641
Spanner Wrench

121642641
5801412-421: RNCC: 3 | RNVC: 2
5801412-421: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-135-2827
Schluessel

121352827
1264-1320: RNCC: 2 | RNVC: 2
530047-0000.000: RNCC: 3 | RNVC: 2
1264-1320: RNCC: 5 | RNVC: 2
5120121352827: RNCC: 5 | RNVC: 2
1264-1320: RNCC: 5 | RNVC: 2
5120B 105: RNCC: 5 | RNVC: 2
530047-0000.000: RNCC: 5 | RNVC: 9
1264-1320: RNCC: 5 | RNVC: 9
530047: RNCC: 5 | RNVC: 9
1264-1320: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-3561
Socket Wrench Socket

121333561
47A9-16: RNCC: 3 | RNVC: 2
02440034: RNCC: 5 | RNVC: 2
109523: RNCC: 5 | RNVC: 9
7410DZ9-16: RNCC: 5 | RNVC: 9
176338: RNCC: 5 | RNVC: 9
A7410DZ-9/16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-387-6675
M Indentation Tool

123876675
80996040299: RNCC: 3 | RNVC: 2
80.99604-0299: RNCC: 5 | RNVC: 2

23 Jan 2012

5120-12-199-4440
Socket Wrench

121994440
5184003: RNCC: 3 | RNVC: 2

25 Apr 1984

5120-12-121-5631

5120-12-126-4958
Plier Clamp

121264958
548-301 180: RNCC: 3 | RNVC: 2
VP8R: RNCC: 3 | RNVC: 2
70970: RNCC: 5 | RNVC: 2
709700-180: RNCC: 5 | RNVC: 2
GA93: RNCC: 5 | RNVC: 2
VP8R: RNCC: 5 | RNVC: 2
10607-175: RNCC: 5 | RNVC: 9
76582001: RNCC: 5 | RNVC: 9
548-30 1 180: RNCC: 5 | RNVC: 9
6345I: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-5534
Stud Inserter

123305534
0851 0476: RNCC: 3 | RNVC: 2
8510476: RNCC: 5 | RNVC: 2

8 Jan 1993

5120-12-198-6573
Auf Spann- Buegel

121986573
234 000: RNCC: 3 | RNVC: 2

17 Feb 1984

5120-12-380-4907
Screw Thread Insert Inserter

123804907
620000637: RNCC: 3 | RNVC: 2

3 Nov 2009

5120-12-139-3144
Dorn

121393144
8205890543: RNCC: 3 | RNVC: 2
016M02700: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-350-4808
Rotating Members Aligning Tool

123504808
26-21C1359G002P7: RNCC: 3 | RNVC: 2

5 Apr 2000

5120-12-369-8084
Socket Wrench Set

123698084
210-S12M: RNCC: 3 | RNVC: 2
K896-12M: RNCC: 3 | RNVC: 2
00.38.73.90: RNCC: 5 | RNVC: 2

17 Aug 2006

5120-12-355-9656
Lamp Extractor

123559656
22-42921-001: RNCC: 3 | RNVC: 2
42-921-001: RNCC: 5 | RNVC: 2

9 Jan 2002

5120-12-309-9629
Hand Material Handling Hook

123099629
13.5: RNCC: 3 | RNVC: 2

24 Mar 1987

5120-12-345-2431
Torque Wrench Adapter

123452431
TN 552-2: RNCC: 3 | RNVC: 2

16 Feb 1998

5120-12-392-4871
Pip Jointing Clamp

123924871
690.475.00.1: RNCC: 3 | RNVC: 2

12 Jun 2013

5120-12-389-8122
Schloszoe Werkzeug

123898122
KV1088: RNCC: 3 | RNVC: 2

27 Aug 2012

5120-12-368-6572
Screwdriver Bit

123686572
1455-IS8: RNCC: 3 | RNVC: 2
00.45.07.45: RNCC: 5 | RNVC: 2

4 Apr 2006

5120-12-121-1204

5120-12-194-5052
Spanner Wrench

121945052
NO PRIMARY REF 12-194-5052: RNCC: 3 | RNVC: 2
LSK542: RNCC: 5 | RNVC: 9

10 Nov 1982

5120-12-363-6889
Electrical Contact Remover

123636889
80996060595: RNCC: 3 | RNVC: 2

14 Jul 2004

5120-12-344-7912
Mechanical Puller Attachment

123447912
0852 2460: RNCC: 3 | RNVC: 2

9 Dec 1997

5120-12-123-5374
Socket Wrench

121235374
30352820200000: RNCC: 3 | RNVC: 9
30352820200: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-365-3300
Seal Inserter And Remover

123653300
5580333: RNCC: 3 | RNVC: 2
M55.093.056: RNCC: 5 | RNVC: 2
(241)A4249M55.093.056: RNCC: 8 | RNVC: 2

21 Dec 2004

5120-12-363-9848
Bearing And Bushing Inserter

123639848
T671P5002269: RNCC: 3 | RNVC: 2

10 Aug 2004

5120-12-382-2002
Retaining Ring Pliers

123822002
EH 3225: RNCC: 3 | RNVC: 2
01.57.83.69: RNCC: 5 | RNVC: 2

20 May 2010

5120-12-364-5638
Combination Box And Open End Wrench

123645638
40082727-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-386-5183
Driftpin

123865183
F30379896: RNCC: 3 | RNVC: 2

7 Sep 2011

5120-12-040-0211

5120-12-190-3669
Open End Box Wrench

121903669
MKV1150/4501.01.02.09: RNCC: 3 | RNVC: 2

24 Nov 1981

5120-12-322-3500
Drive Pin Punch

123223500
2534: RNCC: 3 | RNVC: 2
4998980001: RNCC: 5 | RNVC: 2

14 Aug 1990

5120-12-002-0655

5120-12-173-5108
Spanner Wrench

121735108
532008U16W1: RNCC: 3 | RNVC: 2
532008U16W1: RNCC: 5 | RNVC: 2
532008U16W1: RNCC: 5 | RNVC: 9
532008U16W1: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-12-328-4265
Pin Inserter

123284265
F607045374270: RNCC: 3 | RNVC: 2
F6374270: RNCC: 5 | RNVC: 2

16 May 1992

5120-12-306-8048
Seal Inserter

123068048
9998778: RNCC: 3 | RNVC: 2
SE356000A: RNCC: 5 | RNVC: 2
81761272: RNCC: 5 | RNVC: 9
120/70 SE 356000A: RNCC: 5 | RNVC: 9

3 Apr 1986

5120-12-126-3115
Pin Vise

121263115
NO PRIMARY REF 12-126-3115: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-348-6478
Torque Wrench Adapter

123486478
8791-20: RNCC: 3 | RNVC: 2

29 Jul 1999

5120-12-311-1239
Face Spanner Wrench Socket

123111239
425589010700: RNCC: 3 | RNVC: 2

28 Jul 1987

5120-12-384-8080
Hammer Handle

123848080
51.000.028: RNCC: 3 | RNVC: 2
51.000.028: RNCC: 5 | RNVC: 2

31 Mar 2011

5120-12-381-5375
Manual Impact Wrench

123815375
05072005001: RNCC: 3 | RNVC: 2
2080: RNCC: 5 | RNVC: 2

2 Mar 2010

5120-12-374-6685
Mounting Lever

123746685
F6147611: RNCC: 3 | RNVC: 2

5 Mar 2008

5120-12-152-7529
Socket Head Screw Key

121527529
HS8371-1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-140-2538
Schluessel

121402538
70000060900010: RNCC: 3 | RNVC: 2
60900010: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-3984
Mechanical Puller

121273984
60010230100008: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-359-0218
Retaining Ring Pliers Set

123590218
96593622: RNCC: 3 | RNVC: 2

10 Dec 2002

5120-12-338-5271
Aufweit Spannbacke

123385271
608380: RNCC: 3 | RNVC: 2

24 Jul 1995

5120-12-376-3770
Screwdriver Bit

123763770
05002938001: RNCC: 3 | RNVC: 2
84SW3-SW3: RNCC: 5 | RNVC: 2

22 Sep 2008

5120-12-341-0748
Bearing And Bushing Inserter

123410748
142620/5: RNCC: 3 | RNVC: 2

25 Jul 1996

5120-12-334-5830
Socket Wrench Screwdriver Attachment

123345830
FAML6E: RNCC: 3 | RNVC: 2
176109: RNCC: 5 | RNVC: 9
A7409LM-6: RNCC: 5 | RNVC: 9

26 May 1994

5120-12-374-7971
Socket Wrench Socket

123747971
4680-2: RNCC: 3 | RNVC: 2

25 Mar 2008

5120-12-390-3158
Socket Wrench Crowfoot Attachment

123903158
540-25: RNCC: 3 | RNVC: 2
02200025: RNCC: 5 | RNVC: 2

29 Oct 2012

5120-12-194-2970
Torque Wrench

121942970
TL5120-0085-060: RNCC: 2 | RNVC: 2
6243-1CTUND6416: RNCC: 3 | RNVC: 2
730AV40: RNCC: 5 | RNVC: 2
730AV/40: RNCC: 5 | RNVC: 9
730V40: RNCC: 5 | RNVC: 9
5120-40322: RNCC: 6 | RNVC: 9

20 Oct 1982

5120-12-387-7009
Leveling-Support Jack

123877009
260J000MGL: RNCC: 3 | RNVC: 2
003988: RNCC: 5 | RNVC: 2

25 Jan 2012

5120-12-342-1970
Spanner Wrench

123421970
5510402: RNCC: 3 | RNVC: 2

2 Jan 1997

5120-12-133-5127
Einstellnadel

121335127
AWENTW2544A70: RNCC: 3 | RNVC: 2
AWENTW2544A70: RNCC: 5 | RNVC: 2
AWENTW2544A70: RNCC: 5 | RNVC: 2
AWENTW2544A70: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-385-5466
Quick Adjusting Screw Clamp

123855466
1-280610: RNCC: 3 | RNVC: 2
280610: RNCC: 5 | RNVC: 2

15 Jun 2011

5120-12-322-5166
Seal Inserter

123225166
038.007.7: RNCC: 3 | RNVC: 2
038.007.7-4: RNCC: 5 | RNVC: 2
790521177: RNCC: 5 | RNVC: 2

29 Aug 1990

5120-12-385-6196
Pull And Press Tool

123856196
F6450807: RNCC: 3 | RNVC: 2

22 Jun 2011

5120-12-367-5888
Flat Tip Screwdriver

123675888
10038: RNCC: 3 | RNVC: 2

7 Sep 2005

5120-12-198-6579
Aufweitwer Einsatz

121986579
234 208: RNCC: 3 | RNVC: 2

17 Feb 1984

5120-12-171-6849
Mechanical Puller Attachment

121716849
220-8: RNCC: 3 | RNVC: 2
108144: RNCC: 5 | RNVC: 9
4520H: RNCC: 5 | RNVC: 9

3 Nov 1977

5120-12-359-9213
Drive Pin Punch

123599213
N/W/100-116466/4+7: RNCC: 3 | RNVC: 2

20 Mar 2003

5120-12-333-5679
Drive Pin Punch

123335679
076-240080-905-0: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-369-7316
Drift Punch

123697316
F 002 H30 006: RNCC: 3 | RNVC: 2
F 002 H30 006: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-350-8347
Torque Wrench

123508347
986461: RNCC: 3 | RNVC: 2

26 May 2000

5120-12-147-3816
Spanner Wrench

121473816
760308020001: RNCC: 3 | RNVC: 2
760308020001: RNCC: 5 | RNVC: 9
760308020001: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-335-1039
Seal Inserter

123351039
F30370330: RNCC: 3 | RNVC: 2

25 Jul 1994

5120-12-357-7254
Seal Inserter

123577254
9217984000: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-174-9814
Montierhuelse

121749814
4S55048-0000: RNCC: 3 | RNVC: 2

15 Aug 1978

5120-12-172-3533
Spanner Wrench

121723533
1687950012: RNCC: 3 | RNVC: 2
0258216: RNCC: 5 | RNVC: 2
258216: RNCC: 5 | RNVC: 9
KDEP2998: RNCC: 5 | RNVC: 9

11 Jan 1978

5120-12-369-0313
Hand Hammer

123690313
46301: RNCC: 3 | RNVC: 2
00.75.19.50: RNCC: 5 | RNVC: 2

16 May 2006

5120-12-195-6283
Fl Montierwerkzeug

121956283
14587-01: RNCC: 3 | RNVC: 2
MAGERD 8099: RNCC: 5 | RNVC: 9

21 Mar 1983

5120-12-181-8784
Flat Tip Screwdriver

121818784
3055/1: RNCC: 3 | RNVC: 2
42723: RNCC: 5 | RNVC: 2
53895: RNCC: 5 | RNVC: 9
833-1: RNCC: 5 | RNVC: 9

21 Dec 1979

5120-12-357-2290
Duese Reiniger

123572290
0986611145: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-368-8756
Socket Wrench Socket

123688756
770-LTXE16: RNCC: 3 | RNVC: 2
00.50.45.01: RNCC: 5 | RNVC: 2

3 May 2006

5120-12-368-2536
Combination Box And Open End Wrench

123682536
40481818-TCS: RNCC: 3 | RNVC: 2

17 Jan 2006

5120-12-392-6569
Hand Hammer

123926569
10785: RNCC: 3 | RNVC: 2
70130004: RNCC: 5 | RNVC: 2

26 Jun 2013

5120-12-148-0351
Ein- Und Ausbauvorr

121480351
038M00900: RNCC: 3 | RNVC: 2
VM78159: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-325-8172
Spanner Wrench

123258172
527634: RNCC: 3 | RNVC: 2
527634: RNCC: 5 | RNVC: 2
527634: RNCC: 5 | RNVC: 9

12 Jul 1991

5120-12-161-6221
Socket Wrench

121616221
1712180108: RNCC: 3 | RNVC: 2
17121 80108: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-164-3433
Montagevorrichtung

121643433
838589215900: RNCC: 3 | RNVC: 2
5120 104: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-172-9117
Abdrueckvorrichtung

121729117
VG95211-ML-121729117: RNCC: 2 | RNVC: 2
1X56 136 655: RNCC: 3 | RNVC: 2
1X56136655: RNCC: 5 | RNVC: 9

2 Mar 1978

5120-12-344-2955
Lager- Und Einsatz

123442955
5870 048 135: RNCC: 3 | RNVC: 2
5870-048-135: RNCC: 5 | RNVC: 2

14 Oct 1997

5120-12-388-3887
Spanner Wrench

123883887
000-280: RNCC: 3 | RNVC: 2

16 Mar 2012

5120-12-335-4447
Mechanical Puller

123354447
0852 3037: RNCC: 3 | RNVC: 2
8523037: RNCC: 5 | RNVC: 2

18 Aug 1994

5120-12-120-0240
Digging Bar

121200240
510060: RNCC: 2 | RNVC: 2
5120-040: RNCC: 2 | RNVC: 2
Q 5 3141 9371: RNCC: 5 | RNVC: 2
Q 5 3141 9371: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-158-7387
Screw Extractor Set

121587387
840/6: RNCC: 3 | RNVC: 2
49B: RNCC: 3 | RNVC: 2
8551-66: RNCC: 3 | RNVC: 2
01491000600: RNCC: 3 | RNVC: 2
4433350002: RNCC: 5 | RNVC: 2
54476: RNCC: 5 | RNVC: 2
840-1-6: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-322-3501
Open End Wrench

123223501
6-1 5/8X1 3/4AF: RNCC: 3 | RNVC: 2
607304: RNCC: 5 | RNVC: 2

14 Aug 1990

5120-12-170-9868
Open End Wrench

121709868
100332-10410W1: RNCC: 3 | RNVC: 2
4900072-007000: RNCC: 5 | RNVC: 2
100332-10410W1: RNCC: 5 | RNVC: 9
4900072-007000: RNCC: 5 | RNVC: 9

29 Aug 1977

5120-12-309-2837
Seal Inserter

123092837
824126-4000: RNCC: 3 | RNVC: 2

9 Jan 1987

5120-12-126-2150
Spark Testing Screwdriver

121262150
3025: RNCC: 3 | RNVC: 2
46100: RNCC: 3 | RNVC: 2
131545: RNCC: 5 | RNVC: 9
8042: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-369-7306
Seal Remover

123697306
120680: RNCC: 3 | RNVC: 2
120680: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-326-5834
Torque Wrench Adapter

123265834
4990026: RNCC: 3 | RNVC: 2

9 Oct 1991

5120-12-368-8263
Socket Wrench Screwdriver Attachment

123688263
3245TXL 20: RNCC: 3 | RNVC: 2
00.50.29.82: RNCC: 5 | RNVC: 2

26 Apr 2006

5120-12-383-6818
Ge Montierwerkzeug

123836818
1X56.095.060: RNCC: 3 | RNVC: 2

24 Nov 2010

5120-12-354-6783
Tubing Pinch-Off Tool

123546783
BN102744: RNCC: 3 | RNVC: 2

15 Aug 2001

5120-12-156-1508
Mechanical Puller

121561508
NM146-02: RNCC: 3 | RNVC: 2
JD5120-12-156-1508: RNCC: 3 | RNVC: 2
NM146-02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-341-0725
Nietzugko Aufnahme

123410725
750-050: RNCC: 3 | RNVC: 2
750-050: RNCC: 5 | RNVC: 2

25 Jul 1996

5120-12-132-0160
Ratchet Wrench

121320160
NO PRIMARY REF 12-132-0160: RNCC: 3 | RNVC: 2
207403: RNCC: 5 | RNVC: 9
6093F: RNCC: 5 | RNVC: 9
6093F: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-310-4600
Stud Inserter And Remover

123104600
4592: RNCC: 3 | RNVC: 2
180404: RNCC: 5 | RNVC: 2

22 May 1987

5120-12-145-9300
Justier Stift

121459300
6129492: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-353-3996
Torque Wrench

123533996
8981A: RNCC: 3 | RNVC: 2
1807818: RNCC: 5 | RNVC: 2

20 Mar 2001

5120-12-312-5184
Box Wrench

123125184
170320: RNCC: 3 | RNVC: 2
80996030173: RNCC: 5 | RNVC: 2

14 Jan 1988

5120-12-325-5820
Furnace And Flue Wire Brush

123255820
7071473: RNCC: 3 | RNVC: 2

19 Jun 1991

5120-12-368-9102
Socket Wrench Socket

123689102
770-LA13/32: RNCC: 3 | RNVC: 2
00.48.28.75: RNCC: 5 | RNVC: 2

5 May 2006

5120-12-151-6597
Tr Nietvorrichtung

121516597
WKW9008-0407V125: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-390-6923
Socket Wrench

123906923
F1.4553-30-03-00.00-00: RNCC: 3 | RNVC: 2

4 Dec 2012

5120-12-133-3474
Einpresz- Huelse

121333474
CH1989-15NM: RNCC: 3 | RNVC: 2
1201 9473: RNCC: 5 | RNVC: 2
W38558A: RNCC: 5 | RNVC: 2
CH1989-15NM: RNCC: 5 | RNVC: 9
A26-50-125: RNCC: 5 | RNVC: 9
W38558A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-328-3503
Eindrueckwerkzeug

123283503
4900259-202200-00-02: RNCC: 2 | RNVC: 2
VS5026Z426: RNCC: 3 | RNVC: 2
VS5026Z426: RNCC: 5 | RNVC: 2
VS5026Z426: RNCC: 5 | RNVC: 9

8 May 1992

5120-12-198-5811
Face Spanner Wrench Socket

121985811
5870401099: RNCC: 3 | RNVC: 2
026049: RNCC: 5 | RNVC: 2
5870401082: RNCC: 5 | RNVC: 9
5870401099: RNCC: 5 | RNVC: 9

14 Feb 1984

5120-12-327-7353
Wuergezangenteil

123277353
0999-000-0086: RNCC: 3 | RNVC: 2

25 Feb 1992

5120-12-130-9583
Socket Head Screw Key

121309583
WA4: RNCC: 3 | RNVC: 2
09000004-00: RNCC: 5 | RNVC: 2
149120401: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-0832
Torque Wrench Adapter

121940832
TL5120-0086-550: RNCC: 2 | RNVC: 2
21/DC-22: RNCC: 5 | RNVC: 9
6263110031: RNCC: 5 | RNVC: 9
6630C-22: RNCC: 5 | RNVC: 9
732/10 22: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-343-4666
Crimping Tool Die

123434666
VG95236T25A0003: RNCC: 2 | RNVC: 2
8400-2282: RNCC: 3 | RNVC: 2

24 Jun 1997

5120-12-333-6042
Aligning Punch

123336042
NO PRIMARY REF 12-333-6042: RNCC: 3 | RNVC: 2
21-4110: RNCC: 5 | RNVC: 9

12 Jan 1994

5120-12-388-5316
Socket Wrench Screwdriver Attachment

123885316
8806-PH3: RNCC: 3 | RNVC: 2
4000896039869: RNCC: 5 | RNVC: 2

29 Mar 2012

5120-12-313-8822
Spanner Wrench

123138822
4207424: RNCC: 3 | RNVC: 2

17 May 1988

5120-12-322-1379
Bearing And Bushing Inserter

123221379
926368477: RNCC: 3 | RNVC: 2
3201-750.03.64.000-000: RNCC: 5 | RNVC: 2

27 Jul 1990

5120-12-140-1147

5120-12-368-8132
Socket Wrench Screwdriver Attachment

123688132
3200-IS1,6X8: RNCC: 3 | RNVC: 2
00.50.08.61: RNCC: 5 | RNVC: 2

24 Apr 2006

5120-12-347-3373
Nieter Und Nietsort

123473373
8750002: RNCC: 3 | RNVC: 2

30 Nov 1998

5120-12-024-4588

5120-12-184-9673
Pin Vise

121849673
695-2: RNCC: 3 | RNVC: 9

28 Aug 1980

5120-12-336-5074
Bearing And Bushing Inserter

123365074
0851 6205: RNCC: 3 | RNVC: 2
8516205: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-140-1207
Spanner Wrench

121401207
V02014: RNCC: 3 | RNVC: 2
V2014: RNCC: 5 | RNVC: 2
V02014: RNCC: 5 | RNVC: 9
V2014: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-6574

5120-12-021-2686

5120-12-150-6254
Ausgle Sperrbuegel

121506254
510279: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-172-6855
Spanner Wrench

121726855
S51523-0000: RNCC: 3 | RNVC: 2

13 Feb 1978

5120-12-388-6735
Installation And Re

123886735
050.165: RNCC: 3 | RNVC: 2
050.165: RNCC: 5 | RNVC: 2

12 Apr 2012

5120-12-309-8415
Rohrbieger Hebel

123098415
840530-00.05: RNCC: 3 | RNVC: 2

10 Mar 1987

5120-12-376-5354
Socket Head Screw Key

123765354
43725: RNCC: 3 | RNVC: 2

14 Oct 2008

5120-12-389-5316
Socket Head Screw Key

123895316
48560010-TCS: RNCC: 3 | RNVC: 2

18 Jul 2012

5120-12-132-2731
Kerbstemmer

121322731
VW124: RNCC: 3 | RNVC: 2
VW124: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-120-5633
Flat Tip Screwdriver

121205633
NO PRIMARY REF 12-120-5633: RNCC: 3 | RNVC: 2
345-7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-140-9060
Hand Roller

121409060
628 0-150: RNCC: 3 | RNVC: 2
909199104: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-171-6847
Mechanical Puller Attachment

121716847
220-6: RNCC: 3 | RNVC: 2
108142: RNCC: 5 | RNVC: 9
4520F: RNCC: 5 | RNVC: 9

3 Nov 1977

5120-12-362-4714
Cross Tip Screwdriver

123624714
54.0084.960.35: RNCC: 3 | RNVC: 2
8078VDE-1: RNCC: 5 | RNVC: 2

27 Feb 2004

5120-12-346-2251
Terminal Crimping Tool Contact Positioner

123462251
VG95236T27A0003: RNCC: 2 | RNVC: 2
294GB5027-1: RNCC: 3 | RNVC: 2

30 Jun 1998

5120-12-345-4452
Drive Pin Punch Set

123454452
108/6PC: RNCC: 3 | RNVC: 2
96 70 07 02: RNCC: 5 | RNVC: 2
714 63 41: RNCC: 5 | RNVC: 2

17 Mar 1998

5120-12-371-6383
Stake Remover

123716383
909186102: RNCC: 3 | RNVC: 2

30 Apr 2007

5120-12-356-8484
Hand Terminal Crimping Tool

123568484
K33: RNCC: 3 | RNVC: 2

10 Apr 2002

5120-12-381-9960
Socket Wrench

123819960
42-80016-810: RNCC: 3 | RNVC: 2

26 Apr 2010

5120-12-171-0795
Ausdrueckwerkzeug

121710795
105-41961W1: RNCC: 3 | RNVC: 2

7 Sep 1977

5120-12-177-3185
Abziehv Druckplatte

121773185
23290-268090.002: RNCC: 2 | RNVC: 2
4940103302: RNCC: 3 | RNVC: 2
1079668: RNCC: 3 | RNVC: 2
23290-268090.002: RNCC: 3 | RNVC: 2
23290-268090-002: RNCC: 5 | RNVC: 9
23290-268090.002: RNCC: 5 | RNVC: 9

29 Jan 1979

5120-12-124-8494
Abziehvorrichtung

121248494
35-10-10: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-338-2292
Pliers

123382292
3121160: RNCC: 3 | RNVC: 2
3121 160: RNCC: 5 | RNVC: 2
71510: RNCC: 5 | RNVC: 2

8 Jun 1995

5120-12-325-6288
Seal Inserter

123256288
385589041500: RNCC: 3 | RNVC: 2

24 Jun 1991

5120-12-191-1892
Haltevorrichtung

121911892
1X56137132: RNCC: 3 | RNVC: 2

18 Jan 1982

5120-12-387-2359
Hand Terminal Crimping Tool

123872359
0714107112: RNCC: 3 | RNVC: 2

17 Nov 2011

5120-12-127-4161

5120-12-379-0638
Hous Mounting Tool

123790638
F6554714: RNCC: 3 | RNVC: 2

19 Jun 2009

5120-12-368-6508
Open End Wrench

123686508
146A-1/4X1/4: RNCC: 3 | RNVC: 2
00.25.58.36: RNCC: 5 | RNVC: 2

4 Apr 2006

5120-12-328-9960
Socket Wrench Socket

123289960
972082600430: RNCC: 3 | RNVC: 2
80.99612.0014: RNCC: 5 | RNVC: 9

8 Jul 1992

5120-12-346-2252
Terminal Crimping Tool Contact Positioner

123462252
VG95236T27A0006: RNCC: 2 | RNVC: 2
K709: RNCC: 3 | RNVC: 2

30 Jun 1998

5120-12-383-1059
Open End Wrench

123831059
F30378796: RNCC: 3 | RNVC: 2

14 Sep 2010

5120-12-359-0217
Retaining Ring Pliers Set

123590217
96593623: RNCC: 3 | RNVC: 2

10 Dec 2002

5120-12-126-1846
Tool Handle Wedge

121261846
KRALLE3: RNCC: 3 | RNVC: 2
KRALLE3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-350-2571
Bl Ausbeulwerkzeug

123502571
015: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-147-6695
Schluessel

121476695
K242: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-146-1126
Dic Eindrueckplatte

121461126
510202: RNCC: 3 | RNVC: 2
23111-7101-14: RNCC: 5 | RNVC: 2
510202: RNCC: 5 | RNVC: 9
510202: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-319-9059
Flat Tip Screwdriver Set

123199059
250A-01-0100: RNCC: 3 | RNVC: 2
250A-01-0100: RNCC: 5 | RNVC: 9

15 Nov 1989

5120-12-158-3512
Spanner Wrench

121583512
264-179: RNCC: 3 | RNVC: 2
264-179: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-381-9446
Spanner Wrench

123819446
279603576: RNCC: 3 | RNVC: 2

20 Apr 2010

5120-12-131-7147
Kegel Druckstempel

121317147
3045890539: RNCC: 3 | RNVC: 2
3045890539: RNCC: 3 | RNVC: 9
304589053900: RNCC: 5 | RNVC: 2
304589053900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-359-6703
Pin Inserter And Remover

123596703
T622P3009051: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-392-6249
Face Spanner Wrench Socket

123926249
49904435: RNCC: 3 | RNVC: 2

24 Jun 2013

5120-12-176-7184
Bremsbel Auszieher

121767184
03.9314-6100.3: RNCC: 3 | RNVC: 2
7083631: RNCC: 5 | RNVC: 2
001589433300: RNCC: 5 | RNVC: 2
3-9314-6100-3: RNCC: 5 | RNVC: 9

13 Dec 1978

5120-12-130-7906

5120-12-305-8806
Bearing And Bushing Inserter

123058806
4900059-752035.000.0: RNCC: 2 | RNVC: 2
4900059-752035.000.0: RNCC: 3 | RNVC: 2

30 Dec 1985

5120-12-367-8839
W Spannvorrichtung

123678839
349995: RNCC: 3 | RNVC: 2

27 Oct 2005

5120-12-309-7125
Mechanical Puller

123097125
F600009278223: RNCC: 3 | RNVC: 2

18 Feb 1987

5120-12-176-1332
Socket Head Screw Key

121761332
C1997M10: RNCC: 3 | RNVC: 2
148563: RNCC: 5 | RNVC: 2
907810: RNCC: 5 | RNVC: 9
C1997M10MM: RNCC: 6 | RNVC: 9

9 Nov 1978

5120-12-357-2287
Duesenreini Halter

123572287
0986611150: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-364-7245
Hand Material Handling Hook

123647245
140589023300: RNCC: 3 | RNVC: 2

22 Oct 2004

5120-12-384-8645
Brad Awl

123848645
50.000.005: RNCC: 3 | RNVC: 2

5 Apr 2011

5120-12-126-2041

5120-12-135-5967
Rohr- Zange

121355967
44-2 1-2: RNCC: 3 | RNVC: 2
53410030: RNCC: 5 | RNVC: 9
A300DIN5246: RNCC: 5 | RNVC: 9
DIN5246-A300: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-3388
Lamp Extractor

121943388
P-896837-405: RNCC: 3 | RNVC: 2
P896837-403: RNCC: 5 | RNVC: 2
P896837-405: RNCC: 5 | RNVC: 2
P896837-407: RNCC: 5 | RNVC: 2
MAGERD 8714: RNCC: 5 | RNVC: 9

25 Oct 1982

5120-12-366-8629
Socket Wrench Crowfoot Attachment

123668629
440MJ20: RNCC: 3 | RNVC: 2
02210020: RNCC: 5 | RNVC: 2
02210020: RNCC: 5 | RNVC: 2

16 Jun 2005

5120-12-340-9737
Socket Head Screw Key

123409737
1000-1: RNCC: 3 | RNVC: 2
12603: RNCC: 5 | RNVC: 2

11 Jul 1996

5120-12-162-9386

5120-12-306-1691
Socket Head Screw Key

123061691
9039451: RNCC: 3 | RNVC: 2

3 Feb 1986

5120-12-126-1795
Drill Guide

121261795
TL5120-0052-150A: RNCC: 2 | RNVC: 2
1418I: RNCC: 3 | RNVC: 2
104058: RNCC: 5 | RNVC: 2
1418J: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-192-8060
Bearing And Bushing Inserter

121928060
116 589 07 43 00: RNCC: 3 | RNVC: 2
116589074300: RNCC: 3 | RNVC: 2

26 May 1982

5120-12-357-2284
Duese Reiniger

123572284
0986611153: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-336-5080
Bearing And Bushing Inserter

123365080
0852 3008: RNCC: 3 | RNVC: 2
8523008: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-363-9844
Bearing And Bushing Inserter

123639844
T671P5002261: RNCC: 3 | RNVC: 2

10 Aug 2004

5120-12-141-0475
Tropfrohr

121410475
636589022300: RNCC: 3 | RNVC: 2
6365890223: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-177-5847
Montagewerkzeug

121775847
232650: RNCC: 3 | RNVC: 2
232650: RNCC: 3 | RNVC: 9
0232650: RNCC: 5 | RNVC: 9

7 Feb 1979

5120-12-176-4842
Spanner Wrench

121764842
80996030039: RNCC: 3 | RNVC: 2

30 Nov 1978

5120-12-133-5361
Druckventil Heber

121335361
0681340008: RNCC: 3 | RNVC: 2
12157103: RNCC: 5 | RNVC: 2
EF8097B: RNCC: 5 | RNVC: 2
KDEP2978: RNCC: 5 | RNVC: 9
0681340008: RNCC: 5 | RNVC: 9
EF8097B: RNCC: 5 | RNVC: 9
6-0690-84-0-0301: RNCC: 5 | RNVC: 9
6.0690.84.0.0301: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-185-4704
Socket Head Screw Key

121854704
05022925001: RNCC: 3 | RNVC: 2
352-5/16: RNCC: 5 | RNVC: 2
22925: RNCC: 5 | RNVC: 9
952-5-16: RNCC: 5 | RNVC: 9

9 Oct 1980

5120-12-358-1830
Crimpzange Kopf

123581830
118314101: RNCC: 3 | RNVC: 2
80996250084: RNCC: 3 | RNVC: 2
CSV10-0084: RNCC: 5 | RNVC: 2
80.99625-0084: RNCC: 5 | RNVC: 2
80.99625-0043: RNCC: 5 | RNVC: 9
80996250043: RNCC: 5 | RNVC: 9

24 Sep 2002

5120-12-311-2134
Ge Montierwerkzeug

123112134
395589006302: RNCC: 3 | RNVC: 2

5 Aug 1987

5120-12-126-2566
Pliers

121262566
042E227: RNCC: 3 | RNVC: 2
2564: RNCC: 5 | RNVC: 9
802-3: RNCC: 5 | RNVC: 9
2480: RNCC: 5 | RNVC: 9
106493: RNCC: 5 | RNVC: 9
52830: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-365-9447
Swivel Knob Jeweler's Screwdriver Set

123659447
T4874X: RNCC: 3 | RNVC: 2

21 Feb 2005

5120-12-157-9570
Spanner Wrench

121579570
1607950005: RNCC: 3 | RNVC: 2
1607950005: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-135-5020

5120-12-365-6619
Box Wrench

123656619
CBD30102P04: RNCC: 3 | RNVC: 2

24 Jan 2005

5120-12-181-9549
Spanner Wrench

121819549
01TC31019: RNCC: 3 | RNVC: 2

28 Dec 1979

5120-12-391-0778
Rotat Holding Tool

123910778
F6554719: RNCC: 3 | RNVC: 2

23 Jan 2013

5120-12-379-2013
Bearing And Bushing Inserter And Remover

123792013
105-42121W4: RNCC: 3 | RNVC: 2

2 Jul 2009

5120-12-365-6764
Socket Wrench

123656764
T4921190: RNCC: 3 | RNVC: 2

24 Jan 2005

5120-12-050-0824

5120-12-196-7648
Einstell Schluessel

121967648
FM7021: RNCC: 3 | RNVC: 2
MAGERD 9811: RNCC: 5 | RNVC: 9

15 Aug 1983

5120-12-375-9036
Torque Wrench

123759036
215153: RNCC: 3 | RNVC: 2

17 Jul 2008

5120-12-368-2537
Combination Box And Open End Wrench

123682537
40482020-TCS: RNCC: 3 | RNVC: 2

17 Jan 2006

5120-12-198-1933
Spanner Wrench

121981933
12709-21000W1: RNCC: 2 | RNVC: 2
335912-9010.000: RNCC: 3 | RNVC: 2
335912-9010.000: RNCC: 5 | RNVC: 9

28 Dec 1983

5120-12-304-0706
Box Wrench

123040706
8-293-408-000: RNCC: 3 | RNVC: 2

7 Jun 1985

5120-12-147-0824
Open End Wrench

121470824
1480D20A02: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-3039

5120-12-023-2536

5120-12-161-5436
Ratchet Wrench

121615436
R5ANDV27ANDV32ANDS32: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-358-6262
Electrical Connector Inserter

123586262
09990000103: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-12-390-6520
Spanner Wrench

123906520
7125120: RNCC: 3 | RNVC: 2

30 Nov 2012

5120-12-363-9284
Bearing And Bushing Inserter

123639284
T670P5001292: RNCC: 3 | RNVC: 2

5 Aug 2004

5120-12-194-0634
Socket Wrench Set

121940634
NO PRIMARY REF 12-194-0634: RNCC: 3 | RNVC: 2
20 EBAU: RNCC: 5 | RNVC: 9
617 261: RNCC: 5 | RNVC: 9

28 Sep 1982

5120-12-322-5498
Socket Wrench

123225498
704-182021-000-0: RNCC: 3 | RNVC: 2

31 Aug 1990

5120-12-353-4436
Screwdriver Bit

123534436
602-2-25MM: RNCC: 3 | RNVC: 2

23 Mar 2001

5120-12-310-6853
Open End Wrench

123106853
NO PRIMARY REF 12-310-6853: RNCC: 3 | RNVC: 2
329-5: RNCC: 5 | RNVC: 9
5711720004: RNCC: 5 | RNVC: 9

19 Jun 1987

5120-12-384-0029
Cyli Mounting Tool

123840029
F6790544: RNCC: 3 | RNVC: 2

10 Jan 2011

5120-12-140-2223

5120-12-181-3080
Drive Pin Punch

121813080
23305-264100.15.0: RNCC: 2 | RNVC: 2
23305-264100-15-0: RNCC: 3 | RNVC: 2
HT39/6891/02: RNCC: 5 | RNVC: 9
23305-264100-15-0: RNCC: 5 | RNVC: 9
23305-264100.15.0: RNCC: 5 | RNVC: 9

14 Nov 1979

5120-12-123-5435
Socket Wrench

121235435
9040/4L: RNCC: 3 | RNVC: 2
775863: RNCC: 3 | RNVC: 2
51935: RNCC: 5 | RNVC: 2
06100020: RNCC: 5 | RNVC: 2
610-2: RNCC: 5 | RNVC: 2
169120403: RNCC: 5 | RNVC: 2
28L: RNCC: 5 | RNVC: 9
720: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-023-1485

5120-12-126-3296
Hand Hammer

121263296
51198025: RNCC: 3 | RNVC: 2
4380-0250: RNCC: 5 | RNVC: 2
51198-0-25: RNCC: 5 | RNVC: 9
574A361-250: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-170-7566
Hand Terminal Crimping Tool

121707566
1301150: RNCC: 3 | RNVC: 2
224: RNCC: 5 | RNVC: 2
124: RNCC: 5 | RNVC: 9

3 Aug 1977

5120-12-389-0350
Bearing And Bushing Remover

123890350
80996026002: RNCC: 3 | RNVC: 2
80.99602-6002: RNCC: 5 | RNVC: 2

21 May 2012

5120-12-371-1872
Spanner Wrench

123711872
2277-315400B00C: RNCC: 3 | RNVC: 2

26 Feb 2007

5120-12-372-1847
Lu Montierwerkzeug

123721847
248308: RNCC: 3 | RNVC: 2

25 Jun 2007

5120-12-171-9961
Retaining Ring Pliers

121719961
2464-A1: RNCC: 3 | RNVC: 2
140643: RNCC: 5 | RNVC: 2
2464A1: RNCC: 5 | RNVC: 9

8 Dec 1977

5120-12-337-2059
Duese Reiniger

123372059
11.49027-0023: RNCC: 3 | RNVC: 2
055.070: RNCC: 5 | RNVC: 2
055.070: RNCC: 5 | RNVC: 9
11.49027-0023: RNCC: 5 | RNVC: 9

1 Feb 1995

5120-12-135-2981
Mechanical Puller

121352981
JD5120-12-135-2981: RNCC: 3 | RNVC: 2
779-23: RNCC: 3 | RNVC: 2
128-2: RNCC: 3 | RNVC: 2
4545-2: RNCC: 3 | RNVC: 2
598101-990007.000.0: RNCC: 5 | RNVC: 2
108255: RNCC: 5 | RNVC: 2
4938980003: RNCC: 5 | RNVC: 2
52155: RNCC: 5 | RNVC: 2
779-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-8130
Druckstempel

121818130
VW407: RNCC: 3 | RNVC: 9

17 Dec 1979

5120-12-092-2253

5120-12-126-1599
Pliers

121261599
105-494 200: RNCC: 3 | RNVC: 2
200DIN5244: RNCC: 4 | RNVC: 1
9030-8CPI: RNCC: 5 | RNVC: 9
1106-200: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-320-8328
Catch Lever Tool

123208328
3V 4697-B: RNCC: 3 | RNVC: 2
3V 4697 B: RNCC: 5 | RNVC: 9
3V 4697-B: RNCC: 5 | RNVC: 9

21 Feb 1990

5120-12-153-2079
Socket Wrench

121532079
CH279-6FE: RNCC: 3 | RNVC: 2
1201 9482: RNCC: 5 | RNVC: 2
CH279-6FE: RNCC: 5 | RNVC: 9
A26-50-27: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-139-3078
Zwischenstueck

121393078
8205893263: RNCC: 3 | RNVC: 2
016M03900: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-5503
Mechanical Puller

121265503
035589013300: RNCC: 3 | RNVC: 2
035589013300: RNCC: 3 | RNVC: 9
0355890133: RNCC: 5 | RNVC: 2
035 589 01 33 00: RNCC: 5 | RNVC: 2
035 589 01 33 00: RNCC: 5 | RNVC: 2
0355890133: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-337-3488
Gl Montierwerkzeug

123373488
7-128-13-04-03A: RNCC: 3 | RNVC: 2

17 Feb 1995

5120-12-156-3206
Dorn

121563206
1215 8500: RNCC: 3 | RNVC: 2
12158500: RNCC: 5 | RNVC: 9
6-206-0-690-006-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-1951
Dreh Haltewerkzeug

123641951
F6557974: RNCC: 3 | RNVC: 2

31 Aug 2004

5120-12-091-7727

5120-12-181-4005
Open End Wrench

121814005
DIN3114-55: RNCC: 2 | RNVC: 2
55DIN3114: RNCC: 5 | RNVC: 2

19 Nov 1979

5120-12-334-9529
Open End Wrench

123349529
4900399-411110.12: RNCC: 2 | RNVC: 2
4900399-411110.12: RNCC: 3 | RNVC: 2

6 Jul 1994

5120-12-120-9204
Socket Wrench

121209204
DIN896-A32X36: RNCC: 2 | RNVC: 2
A32X36DIN896: RNCC: 5 | RNVC: 2
A32X36DIN896GALNI8: RNCC: 5 | RNVC: 9
26-32X36: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-164-8978
Abziehplatte

121648978
23305-264110.04.0: RNCC: 2 | RNVC: 2
23350-264110.04.0: RNCC: 3 | RNVC: 2
23305-264110-04-0: RNCC: 5 | RNVC: 9
23305-264110.04.0: RNCC: 5 | RNVC: 9
23305-264110-04-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-310-2834
Spanner Wrench

123102834
335927-9030.000: RNCC: 3 | RNVC: 2
6264.10-5: RNCC: 5 | RNVC: 2
335927-9030-000: RNCC: 5 | RNVC: 9
335927-9030.000: RNCC: 5 | RNVC: 9

5 May 1987

5120-12-368-6398
Torque Wrench Adapter

123686398
0306-LIG11-001-03: RNCC: 3 | RNVC: 2

3 Apr 2006

5120-12-351-9586
Socket Head Screw Key

123519586
ISO2936-6L: RNCC: 2 | RNVC: 2
07153122: RNCC: 3 | RNVC: 2

20 Sep 2000

5120-12-316-4988
Socket Wrench

123164988
844603248: RNCC: 3 | RNVC: 2

20 Jan 1989

5120-12-153-2086
Mechanical Puller

121532086
CH1989-11NM: RNCC: 3 | RNVC: 2
1201 9460: RNCC: 5 | RNVC: 2
CH1989-11NM: RNCC: 5 | RNVC: 9
A26-50-117-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-2767
Mechanical Puller

121272767
83.09143-6006: RNCC: 3 | RNVC: 2
83091436006: RNCC: 3 | RNVC: 2
WL55: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-149-5855

5120-12-327-8051
Spanner Wrench

123278051
4W2910-A: RNCC: 3 | RNVC: 2
4W2910-A: RNCC: 5 | RNVC: 9

7 Mar 1992

5120-12-123-5111
Open End Wrench

121235111
NO PRIMARY REF 12-123-5111: RNCC: 3 | RNVC: 2
900M19X22: RNCC: 5 | RNVC: 9
905020: RNCC: 5 | RNVC: 9
103184: RNCC: 5 | RNVC: 9
C900M19X22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-367-1420
Face Spanner Wrench Socket

123671420
F30377657: RNCC: 3 | RNVC: 2

12 Jul 2005

5120-12-176-7312
Open End Wrench

121767312
1121-60004W3: RNCC: 3 | RNVC: 2
1121-60004W3: RNCC: 5 | RNVC: 9

15 Dec 1978

5120-12-165-0156
Universal Puller Kit

121650156
43N: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-384-8527
Saddler's Awl Haft

123848527
50.000.014: RNCC: 3 | RNVC: 2

5 Apr 2011

5120-12-143-9471
Zuggerae Drahtseil

121439471
28710: RNCC: 3 | RNVC: 2
803-012: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-180-0295
Karte Auszieher

121800295
66-3875-115-00A001: RNCC: 3 | RNVC: 2
242651: RNCC: 5 | RNVC: 2

17 Aug 1979

5120-12-150-0983
Electron Tube Extractor

121500983
NO PRIMARY REF 12-150-0983: RNCC: 3 | RNVC: 2
VS0502T081: RNCC: 5 | RNVC: 2
VS0502T081: RNCC: 5 | RNVC: 9
VS0502T81: RNCC: 5 | RNVC: 9
VS502T81: RNCC: 5 | RNVC: 9
GR0SZERR0EHRENHEBER: RNCC: 5 | RNVC: 9
GROSZERROEHRENHEBER: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-134-8966
Dorn

121348966
NO PRIMARY REF 12-134-8966: RNCC: 3 | RNVC: 2
1009910-0044: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-4476
Halte- Klammer

121764476
VW215C: RNCC: 3 | RNVC: 2

27 Nov 1978

5120-12-020-7830

5120-12-168-3398
Dorn

121683398
4173664: RNCC: 3 | RNVC: 2

10 Mar 1977

5120-12-326-1865
Socket Head Screw Key

123261865
NO PRIMARY REF 12-326-1865: RNCC: 3 | RNVC: 2
1996-076: RNCC: 5 | RNVC: 9

15 Aug 1991

5120-12-309-8580
Mechanical Puller

123098580
NO PRIMARY REF 12-309-8580: RNCC: 3 | RNVC: 2
410100: RNCC: 5 | RNVC: 9
41 01 00: RNCC: 5 | RNVC: 9

11 Mar 1987

5120-12-176-7319
Druckstueck

121767319
VG95211-ML-121767319: RNCC: 2 | RNVC: 2
105-21832W1.11: RNCC: 3 | RNVC: 2
105-21832W1-11: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-174-7319
Hammer Handle

121747319
TL5120-0126-A21: RNCC: 2 | RNVC: 2
3244054: RNCC: 3 | RNVC: 2
3244.054: RNCC: 5 | RNVC: 2
224450: RNCC: 5 | RNVC: 9

25 Jul 1978

5120-12-145-7918
Spanner Wrench

121457918
212-059-020-035: RNCC: 3 | RNVC: 2
212059020035: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-347-2388
Socket Wrench Set

123472388
41420001: RNCC: 3 | RNVC: 2

17 Nov 1998

5120-12-311-3626
Spanner Wrench

123113626
264-247: RNCC: 2 | RNVC: 2
264-247: RNCC: 3 | RNVC: 2
196170: RNCC: 5 | RNVC: 2

24 Aug 1987

5120-12-314-4703
Tool Handle Wedge

123144703
370-KH2: RNCC: 3 | RNVC: 2
KH2: RNCC: 5 | RNVC: 2

9 Jul 1988

5120-12-383-4912
Flat Tip Screwdriver

123834912
660100-9: RNCC: 3 | RNVC: 2
08.06507-0400: RNCC: 5 | RNVC: 2
08065070400: RNCC: 5 | RNVC: 2

27 Oct 2010

5120-12-192-2147
Torque Wrench Adapter

121922147
P-895137-405: RNCC: 3 | RNVC: 2
P895137-405: RNCC: 5 | RNVC: 2
MAGERD 3018: RNCC: 5 | RNVC: 2

31 Mar 1982

5120-12-304-5234
Swivel Knob Jeweler's Screwdriver

123045234
52714-110: RNCC: 3 | RNVC: 2
52714/2-5: RNCC: 5 | RNVC: 2

26 Jul 1985

5120-12-320-5621
Combination Box And Open End Wrench

123205621
52036050: RNCC: 3 | RNVC: 2
16-5: RNCC: 3 | RNVC: 2
61350-5: RNCC: 5 | RNVC: 2
613500-5: RNCC: 5 | RNVC: 2
40095050: RNCC: 5 | RNVC: 2

26 Jan 1990

5120-12-177-3019
Socket Wrench Handle Bar

121773019
1036082: RNCC: 3 | RNVC: 2

24 Jan 1979

5120-12-199-2575
Elektron Auszieher

121992575
4983053: RNCC: 3 | RNVC: 2
MAGERD 6658: RNCC: 5 | RNVC: 9

6 Apr 1984

5120-12-382-1594
Inspection Mirror

123821594
JA 90 000 107: RNCC: 3 | RNVC: 2

17 May 2010

5120-12-390-2123
Mecha Fitting Tool

123902123
F30372726: RNCC: 3 | RNVC: 2

17 Oct 2012

5120-12-189-7485
Einstell Schluessel

121897485
4900168-700: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-12-369-7355
Tire Removing Tool

123697355
BM090: RNCC: 3 | RNVC: 2

14 Aug 2006

5120-12-301-6795
Lever Bracket

123016795
067.457.5: RNCC: 3 | RNVC: 2
67457-5: RNCC: 5 | RNVC: 2

1 Nov 1984

5120-12-367-1087
Bearing And Bushing Inserter

123671087
17229104-0: RNCC: 3 | RNVC: 2

11 Jul 2005

5120-12-336-9961
Hand Terminal Crimping Tool

123369961
VG95236T14A0001: RNCC: 2 | RNVC: 2
PZ6/5: RNCC: 3 | RNVC: 2
901146: RNCC: 5 | RNVC: 2

9 Jan 1995

5120-12-390-0072
Mechanical Puller

123900072
8108430: RNCC: 3 | RNVC: 2
1.06/1A-2: RNCC: 5 | RNVC: 2
4036976103410: RNCC: 5 | RNVC: 2
8108430: RNCC: 5 | RNVC: 2
1.06/1A-2: RNCC: 5 | RNVC: 2
4036976103410: RNCC: 5 | RNVC: 2

24 Sep 2012

5120-12-391-9070
Craftsman's Tweezers

123919070
13131: RNCC: 3 | RNVC: 2
77510001: RNCC: 5 | RNVC: 2

17 Apr 2013

5120-12-345-5257
Swivel Knob Jeweler's Screwdriver

123455257
25015190: RNCC: 3 | RNVC: 2
4880X ESD 1,5X60: RNCC: 3 | RNVC: 2
T4880XESD15: RNCC: 5 | RNVC: 9

26 Mar 1998

5120-12-360-8740
Abzieh- Und Aufdrue

123608740
VRM602906-00/025: RNCC: 3 | RNVC: 2
0855 3536: RNCC: 5 | RNVC: 2

18 Jul 2003

5120-12-176-2805
Box Wrench

121762805
23290-268000.010: RNCC: 2 | RNVC: 2
V4940104200: RNCC: 3 | RNVC: 2
9835191: RNCC: 3 | RNVC: 2
23290-268000-010: RNCC: 5 | RNVC: 9
23290-268000.010: RNCC: 5 | RNVC: 9

23 Nov 1978

5120-12-323-5354
Spanner Wrench

123235354
5100274: RNCC: 2 | RNVC: 2
5321-1345001: RNCC: 3 | RNVC: 2

4 Dec 1990

5120-12-185-7988
Elektron Auszieher

121857988
Y301 398 02: RNCC: 3 | RNVC: 2
2-811-00: RNCC: 5 | RNVC: 9
Y30139800: RNCC: 5 | RNVC: 9

1 Nov 1980

5120-12-334-5390
Mechanical Puller Attachment

123345390
0853 0170.005: RNCC: 3 | RNVC: 2

20 May 1994

5120-12-132-4301

5120-12-093-7231

5120-12-308-5537
Bearing And Bushing Inserter

123085537
99346041: RNCC: 3 | RNVC: 2
417500: RNCC: 5 | RNVC: 9
417500: RNCC: 5 | RNVC: 9

22 Oct 1986

5120-12-129-8771
Mechanical Puller

121298771
0681369014: RNCC: 3 | RNVC: 2
EF3645: RNCC: 5 | RNVC: 2
KDAW9989: RNCC: 5 | RNVC: 9
0681369014: RNCC: 5 | RNVC: 9
EF3645: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-358-4881
Socket Wrench Socket

123584881
D19L-34: RNCC: 3 | RNVC: 2

21 Oct 2002

5120-12-144-0628
Socket Wrench

121440628
2895030: RNCC: 3 | RNVC: 2
2895-030: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-321-2948
Spaten Aufnahme

123212948
5803462-250-00: RNCC: 2 | RNVC: 2
FE97-250-00: RNCC: 3 | RNVC: 2
5803462-250-00: RNCC: 5 | RNVC: 2

30 Apr 1990

5120-12-155-9406
Carpenters' Pincers

121559406
NM272: RNCC: 3 | RNVC: 2
NM272: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-185-1011
Socket Wrench Socket

121851011
23290-268150-002: RNCC: 2 | RNVC: 2
23290-268150.002: RNCC: 2 | RNVC: 2

11 Sep 1980

5120-12-176-7185
Scheibe

121767185
355589003303: RNCC: 3 | RNVC: 2

13 Dec 1978

5120-12-120-6599

5120-12-383-5507
Spanner Wrench

123835507
23-530-JK-389: RNCC: 3 | RNVC: 2

5 Nov 2010

5120-12-126-7211
Pinch Bar

121267211
54013-10000-03: RNCC: 2 | RNVC: 2
BB299877: RNCC: 3 | RNVC: 9
BB299877: RNCC: 5 | RNVC: 2
5120144: RNCC: 5 | RNVC: 2
299877: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-165-0242
Flat Tip Screwdriver

121650242
8000-1-6X11X200: RNCC: 3 | RNVC: 9
8000-11X200: RNCC: 3 | RNVC: 9
143227: RNCC: 5 | RNVC: 9
8000-12: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-358-4882
Hand Tube Bender

123584882
240012: RNCC: 3 | RNVC: 2

21 Oct 2002

5120-12-193-5602
Socket Wrench

121935602
65.202.032.10: RNCC: 3 | RNVC: 2

3 Aug 1982

5120-12-389-5106
Torque Wrench Adapter

123895106
R809302: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-199-6170
Aligning Punch

121996170
VV565/83: RNCC: 3 | RNVC: 2

16 May 1984

5120-12-368-7156
Socket Wrench Socket

123687156
770-L 9: RNCC: 3 | RNVC: 2
6133120: RNCC: 3 | RNVC: 2
03010009: RNCC: 3 | RNVC: 2
00.47.99.46: RNCC: 5 | RNVC: 2

10 Apr 2006

5120-12-392-3473
Face Spanner Wrench Socket

123923473
3016R-900200.002.0: RNCC: 3 | RNVC: 2

28 May 2013

5120-12-369-3067
Socket Wrench

123693067
0986611388: RNCC: 3 | RNVC: 2
0 986 611 388: RNCC: 5 | RNVC: 2

20 Jun 2006

5120-12-354-1579
Montierhuelse

123541579
2300223-264205.01.0: RNCC: 2 | RNVC: 2
2300223-264205.01.0: RNCC: 3 | RNVC: 2

12 Jun 2001

5120-12-179-9694
Ausbauvorrichtung

121799694
142390: RNCC: 3 | RNVC: 2
80.99602-0042: RNCC: 5 | RNVC: 2
80996020042: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-162-8227
Mechanical Puller

121628227
1221-9429-01-00-00: RNCC: 3 | RNVC: 2
1221-9429-01-00-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-151-8435

5120-12-091-4764

5120-12-333-7410
Spanner Wrench

123337410
105-31501W5: RNCC: 3 | RNVC: 2

28 Jan 1994

5120-12-329-0384
Hand Screw Starter

123290384
62210510: RNCC: 3 | RNVC: 2

11 Jul 1992

5120-12-369-0024
Screwdriver Bit

123690024
IS19-16X2.5: RNCC: 3 | RNVC: 2
00.50.12.65: RNCC: 5 | RNVC: 2
6656490: RNCC: 5 | RNVC: 2

11 May 2006

5120-12-370-7025
Socket Head Screw Key

123707025
00984: RNCC: 3 | RNVC: 2
334U-5,0X150: RNCC: 5 | RNVC: 2
08.06125-9035: RNCC: 5 | RNVC: 2
08061259035: RNCC: 5 | RNVC: 2

12 Dec 2006

5120-12-331-4480
Spanner Wrench

123314480
544-896: RNCC: 3 | RNVC: 2
5440401: RNCC: 5 | RNVC: 2

5 May 1993

5120-12-331-3975
Spanner Wrench

123313975
0544-902: RNCC: 3 | RNVC: 2
5441301: RNCC: 5 | RNVC: 2

3 May 1993

5120-12-339-6034
Spanner Wrench

123396034
5120-0018-000000: RNCC: 3 | RNVC: 2

11 Dec 1995

5120-12-133-5671
Box Wrench

121335671
518589050300: RNCC: 3 | RNVC: 2
460-14: RNCC: 3 | RNVC: 2
5185890503: RNCC: 5 | RNVC: 2
022M00600: RNCC: 5 | RNVC: 2
HNASL8-14: RNCC: 5 | RNVC: 9
SL8-14: RNCC: 5 | RNVC: 9
SL8-14: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-342-0749
Box Wrench

123420749
DIN7447-16: RNCC: 2 | RNVC: 2

6 Dec 1996

5120-12-124-1762
Box Wrench

121241762
NO PRIMARY REF 12-124-1762: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-135-3730
Body And Fender Spoon

121353730
031A328: RNCC: 3 | RNVC: 2
3040: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-150-0979
Electron Tube Pin Straightener

121500979
VS502G43: RNCC: 3 | RNVC: 9
VS0502G043: RNCC: 5 | RNVC: 2
VS0502G043: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-2642

5120-12-127-8794

5120-12-127-0425
Socket Wrench Socket

121270425
DG30-12: RNCC: 3 | RNVC: 2
47-12: RNCC: 3 | RNVC: 2
02040012: RNCC: 5 | RNVC: 2
7410DM12: RNCC: 5 | RNVC: 9
109510: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-0823
Torque Wrench

123050823
730V/12: RNCC: 3 | RNVC: 2
730V-12: RNCC: 5 | RNVC: 2

24 Sep 1985

5120-12-190-3674
Box Wrench

121903674
MKV1150/4501.01.02.14: RNCC: 3 | RNVC: 2

24 Nov 1981

5120-12-376-7853
Piston Inserter

123767853
5905891731/00: RNCC: 3 | RNVC: 2
590589173100: RNCC: 5 | RNVC: 2

6 Nov 2008

5120-12-179-9685
Skale

121799685
101910-7AND8: RNCC: 3 | RNVC: 2
80.99607-0029: RNCC: 5 | RNVC: 2
80996070029: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-306-9418
Mechanical Puller

123069418
8470355: RNCC: 3 | RNVC: 2
8208-700: RNCC: 5 | RNVC: 2
8208700: RNCC: 5 | RNVC: 2

18 Apr 1986

5120-12-120-5122
Hand Hydraulic Jack

121205122
NO PRIMARY REF 12-120-5122: RNCC: 3 | RNVC: 2
391-50: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-327-1800
Screwdriver And Wrench Assembly

123271800
J176ZZ50000-000: RNCC: 3 | RNVC: 2

12 Dec 1991

5120-12-371-7301
Socket Head Screw Key

123717301
NM290-105: RNCC: 3 | RNVC: 2

9 May 2007

5120-12-140-6426
Inspection Mirror

121406426
C20407-Z7-A37: RNCC: 3 | RNVC: 2
C20407Z7A37: RNCC: 5 | RNVC: 2
TFS70-05387: RNCC: 5 | RNVC: 2
TWZ7AM: RNCC: 5 | RNVC: 2
C20407A7A37: RNCC: 5 | RNVC: 9
TFS70-05387: RNCC: 5 | RNVC: 9
TWZ7AM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-335-4437
Mechanical Puller

123354437
0852 0259: RNCC: 3 | RNVC: 2
8520259: RNCC: 5 | RNVC: 2

18 Aug 1994

5120-12-351-9374
Mechanical Puller Attachment

123519374
CBD45308P01: RNCC: 3 | RNVC: 2

19 Sep 2000

5120-12-091-9885

5120-12-173-9140
Hand Sheet Metal Groover

121739140
631B101-8: RNCC: 3 | RNVC: 9
2279B8: RNCC: 5 | RNVC: 9

22 May 1978

5120-12-364-1173
Dreh Haltewerkzeug

123641173
SMJ209-002-102: RNCC: 3 | RNVC: 2

21 Aug 2004

5120-12-300-5553
Drive Pin Punch

123005553
AZ468-12: RNCC: 3 | RNVC: 2
F48909: RNCC: 5 | RNVC: 9

14 Aug 1984

5120-12-344-6436
Montierdorn

123446436
99365010: RNCC: 3 | RNVC: 2

19 Nov 1997

5120-12-365-9724
Socket Wrench Screwdriver Attachment

123659724
01120005-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-389-4147
Mechanical Puller

123894147
45-1: RNCC: 3 | RNVC: 2
881010-1: RNCC: 5 | RNVC: 2
4021176016448: RNCC: 5 | RNVC: 2

3 Jul 2012

5120-12-362-7201
Screwdriver Bit

123627201
8507-PZ1: RNCC: 3 | RNVC: 2

23 Mar 2004

5120-12-175-1038
Spindel

121751038
VG95211-ML-121751038: RNCC: 2 | RNVC: 2
1X56 131 402-15: RNCC: 3 | RNVC: 2
1X56131402-15: RNCC: 5 | RNVC: 9

23 Aug 1978

5120-12-127-2763
Mechanical Puller

121272763
83.09143-0016: RNCC: 3 | RNVC: 2
83091430016: RNCC: 3 | RNVC: 2
WL49A4: RNCC: 5 | RNVC: 2
WL49A: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-364-6132
Socket Wrench Crowfoot Attachment

123646132
02190020-TCS: RNCC: 3 | RNVC: 2

14 Oct 2004

5120-12-314-2776
Montierhuelse

123142776
0852 9872: RNCC: 3 | RNVC: 2
8529872: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-134-4963

5120-12-319-6399
Mechanical Puller Attachment

123196399
23111-7221.02: RNCC: 2 | RNVC: 2
23111-7221.02: RNCC: 3 | RNVC: 2
1115782: RNCC: 5 | RNVC: 2
1115782: RNCC: 5 | RNVC: 9
23111-7221.02: RNCC: 5 | RNVC: 9
23111-7221.02: RNCC: 5 | RNVC: 9

20 Oct 1989

5120-12-134-2616
Socket Wrench

121342616
026M01200: RNCC: 3 | RNVC: 2
080M01500: RNCC: 5 | RNVC: 2
VM76851: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-177-2159
Aligning Punch

121772159
6900026-9300.03: RNCC: 3 | RNVC: 2
100180-730-01: RNCC: 3 | RNVC: 2
100180-730.01: RNCC: 5 | RNVC: 2

19 Jan 1979

5120-12-163-6637
Torque Wrench Set

121636637
26-21C1449P011: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-147-8903
Achsfeder Spanner

121478903
5069578: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-347-2671
Piston Ring Compressor

123472671
57494-645: RNCC: 3 | RNVC: 2

18 Nov 1998

5120-12-198-5809
Spanner Wrench

121985809
790508277: RNCC: 3 | RNVC: 2
5870240025: RNCC: 3 | RNVC: 2
026047: RNCC: 5 | RNVC: 2
5870240002: RNCC: 5 | RNVC: 9
5870240025: RNCC: 5 | RNVC: 9

14 Feb 1984

5120-12-150-4500

5120-12-151-6563
Hand Rivet Set

121516563
1004-0100W2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-197-9573
Mechanical Puller

121979573
168-5: RNCC: 3 | RNVC: 2
128/5: RNCC: 3 | RNVC: 2

5 Dec 1983

5120-12-157-7526
Ueberlaufrohr

121577526
CH1612-6: RNCC: 3 | RNVC: 2
12158263: RNCC: 5 | RNVC: 2
CH1612-6: RNCC: 5 | RNVC: 9
6-088-8-014-010-7: RNCC: 5 | RNVC: 9
6-088-801-4010-7: RNCC: 5 | RNVC: 9
6.088.801.4010.7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-172-6491
Buchse

121726491
7418798006: RNCC: 3 | RNVC: 2
7418-798-006: RNCC: 5 | RNVC: 2
0535498: RNCC: 5 | RNVC: 2
535498: RNCC: 5 | RNVC: 9

3 Feb 1978

5120-12-195-7185
Machinist's Vise

121957185
NO PRIMARY REF 12-195-7185: RNCC: 3 | RNVC: 2
10203AND10223: RNCC: 5 | RNVC: 9

31 Mar 1983

5120-12-374-4476
Socket Head Screw Key

123744476
08061251200: RNCC: 3 | RNVC: 2
08.06125-1200: RNCC: 5 | RNVC: 2

18 Feb 2008

5120-12-126-4912
Sheet Metalworking Dolly Block

121264912
53650010: RNCC: 3 | RNVC: 2
5287: RNCC: 5 | RNVC: 2
53650: RNCC: 5 | RNVC: 9
2034: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-166-2577
Socket Wrench

121662577
05890: RNCC: 3 | RNVC: 2
05890: RNCC: 5 | RNVC: 9

19 Aug 1976

5120-12-355-3452
Spanner Wrench

123553452
3566009: RNCC: 3 | RNVC: 2

6 Nov 2001

5120-12-130-4010

5120-12-330-3090
Screwdriver Bit

123303090
2657-4MM: RNCC: 3 | RNVC: 2

1 Dec 1992

5120-12-174-1580
Sand And Gravel Scoop

121741580
250DIN11571AND1300DIN20151ES: RNCC: 2 | RNVC: 9
DIN11571-250 UND DIN20151-1300FS: RNCC: 5 | RNVC: 2

7 Jun 1978

5120-12-157-0269
Socket Head Screw Key

121570269
NO PRIMARY REF 12-157-0269: RNCC: 3 | RNVC: 2
106002: RNCC: 5 | RNVC: 9
1997ZB1-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-175-0764
Yarning Iron

121750764
636 C 105 RECHTS-4: RNCC: 3 | RNVC: 9
636C105RECHTS4MM: RNCC: 3 | RNVC: 9
2242A4MM: RNCC: 3 | RNVC: 9

21 Aug 1978

5120-12-196-4037
Hand Powered Poppet Valve Lapper

121964037
795-1: RNCC: 3 | RNVC: 2
4120001: RNCC: 3 | RNVC: 2
5798620001: RNCC: 5 | RNVC: 9

4 Jul 1983

5120-12-135-2338
Open End Wrench

121352338
60-9: RNCC: 3 | RNVC: 2
1930BM9X9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-365-9177
Swivel Knob Jeweler's Screwdriver

123659177
T4881X 07: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-193-6663
Werkzeugausstattung

121936663
NO PRIMARY REF 12-193-6663: RNCC: 3 | RNVC: 2
99-PS-40: RNCC: 5 | RNVC: 9

18 Aug 1982

5120-12-344-5997
Ge Montierwerkzeug

123445997
1X56136468: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-372-0764
Crimping Tool Die

123720764
SP994: RNCC: 3 | RNVC: 2

15 Jun 2007

5120-12-023-0170

5120-12-155-9378
Socket Head Screw Key

121559378
NM290-65: RNCC: 3 | RNVC: 2
NM290-65: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-152-6905
Socket Wrench

121526905
31/9713-08-00-00: RNCC: 3 | RNVC: 2
399025-971327: RNCC: 5 | RNVC: 2
399025-971327: RNCC: 5 | RNVC: 9
31/9713-08-00-00: RNCC: 5 | RNVC: 9
399025-971327: RNCC: 5 | RNVC: 9

30 May 1969

Load More Results