What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 32 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 32 of 62

5120-12-319-9611
Blacksmith's Anvil

123199611
14190: RNCC: 3 | RNVC: 2
14190: RNCC: 5 | RNVC: 9

21 Nov 1989

5120-12-170-3747
Waelz Eintreibdorn

121703747
S5: RNCC: 3 | RNVC: 2
S5: RNCC: 5 | RNVC: 2

8 Jul 1977

5120-12-131-5374
Schluesselsatz

121315374
5100116: RNCC: 2 | RNVC: 2
TL5120-0089: RNCC: 2 | RNVC: 2
5100116: RNCC: 5 | RNVC: 9
WT103: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-358-4231
Bung Wrench

123584231
M32-0102: RNCC: 3 | RNVC: 2

17 Oct 2002

5120-12-391-4035
Socket Wrench

123914035
SSG40G: RNCC: 3 | RNVC: 2

11 Mar 2013

5120-12-369-4863
Timber Wedge

123694863
00008812217: RNCC: 3 | RNVC: 2

10 Jul 2006

5120-12-092-2284

5120-12-332-8485
Montierwerk Huelse

123328485
0852 4755.003: RNCC: 3 | RNVC: 2

27 Sep 1993

5120-12-328-6648
Flat Tip Screwdriver

123286648
52850100: RNCC: 3 | RNVC: 9
52380101: RNCC: 5 | RNVC: 9
51470225: RNCC: 5 | RNVC: 9

12 Jun 1992

5120-12-390-4567
Open End Wrench

123904567
BE 0022: RNCC: 3 | RNVC: 2

14 Nov 2012

5120-12-369-5661
Hand Terminal Crimping Tool

123695661
975214: RNCC: 3 | RNVC: 2
00.16.79.30: RNCC: 5 | RNVC: 2
4003773026808: RNCC: 5 | RNVC: 2
97 52 14: RNCC: 5 | RNVC: 2

25 Jul 2006

5120-12-330-5364
Mechanical Puller Attachment

123305364
0853 0606.010: RNCC: 3 | RNVC: 2
8530606.010: RNCC: 5 | RNVC: 2

6 Jan 1993

5120-12-368-5553
Torque Wrench

123685553
713R20: RNCC: 3 | RNVC: 2
96501620: RNCC: 5 | RNVC: 2

24 Mar 2006

5120-12-195-1240
Montierhuelse

121951240
7438798004: RNCC: 3 | RNVC: 2
7438798004: RNCC: 5 | RNVC: 9

13 Jan 1983

5120-12-339-7883
Open End Wrench

123397883
110390: RNCC: 3 | RNVC: 2

17 Jan 1996

5120-12-181-9733
Pedal Adjustment Tool Compressor

121819733
VW552: RNCC: 3 | RNVC: 9

28 Dec 1979

5120-12-364-0851
Flat Tip Screwdriver

123640851
F30021120: RNCC: 3 | RNVC: 2
M55.093.007: RNCC: 5 | RNVC: 2
(241)A4249M55.093.007: RNCC: 8 | RNVC: 2

19 Aug 2004

5120-12-366-5548
Mechanical Puller Attachment

123665548
4521NC: RNCC: 3 | RNVC: 2
1837754: RNCC: 5 | RNVC: 2

9 May 2005

5120-12-362-4945
Offset Screwdriver

123624945
54.0084.960.86: RNCC: 3 | RNVC: 2
2047-0.8-4: RNCC: 5 | RNVC: 2

3 Mar 2004

5120-12-381-9982
Mounting Sleeve

123819982
BN 3219: RNCC: 3 | RNVC: 2

27 Apr 2010

5120-12-139-9486
Nietvorrichtung

121399486
100129-9202: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-167-9692
Spanner Wrench

121679692
335914-9006.000: RNCC: 2 | RNVC: 2
335914-9006.000: RNCC: 3 | RNVC: 2
1255-32210W1: RNCC: 5 | RNVC: 2
335914-9006.000: RNCC: 5 | RNVC: 9
1255-32210W1: RNCC: 5 | RNVC: 9
335914-9006.000: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-331-7655
Mechanical Puller Attachment

123317655
20042: RNCC: 3 | RNVC: 2
80996340001: RNCC: 5 | RNVC: 2
80.99634.0001: RNCC: 5 | RNVC: 9

18 Jun 1993

5120-12-133-3323
Daem Einstellhebel

121333323
TFS70-05976: RNCC: 3 | RNVC: 2
TFS70-05976: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-0785
Hand Terminal Crimping Tool

121990785
S26-D2: RNCC: 3 | RNVC: 2
S26-D2: RNCC: 5 | RNVC: 9

23 Mar 1984

5120-12-362-5183
Wire Twister Pliers

123625183
54.0084.960.94: RNCC: 3 | RNVC: 2
6575-250: RNCC: 5 | RNVC: 2

4 Mar 2004

5120-12-131-7134
Dorn

121317134
3045890339: RNCC: 3 | RNVC: 2
3045890339: RNCC: 3 | RNVC: 9
304589033900: RNCC: 5 | RNVC: 2
304589033900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-353-6145
Montierhuelse

123536145
9256914000: RNCC: 3 | RNVC: 2

17 Apr 2001

5120-12-132-1656
Socket Wrench

121321656
075130: RNCC: 3 | RNVC: 2
25-46: RNCC: 3 | RNVC: 2
211664: RNCC: 5 | RNVC: 9
75-46: RNCC: 5 | RNVC: 9
25-46: RNCC: 5 | RNVC: 9
25-46: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-314-4702
Tool Handle Wedge

123144702
370-KH1: RNCC: 3 | RNVC: 2
KH1: RNCC: 5 | RNVC: 2

9 Jul 1988

5120-12-120-6706
Open End Wrench

121206706
DIN895-9X11: RNCC: 2 | RNVC: 2
200-9X11: RNCC: 3 | RNVC: 2
9X11DIN895: RNCC: 5 | RNVC: 2
183-003: RNCC: 5 | RNVC: 2
03484: RNCC: 5 | RNVC: 2
860N0206: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-387-3722
Mechanical Puller

123873722
D0132307-002: RNCC: 3 | RNVC: 2

5 Dec 2011

5120-12-365-6433
Electrical Contact Remover

123656433
0230 24001: RNCC: 3 | RNVC: 2
80996060602: RNCC: 3 | RNVC: 2
80.99606.0602: RNCC: 5 | RNVC: 2

20 Jan 2005

5120-12-190-8618
Montageteil

121908618
99374340: RNCC: 3 | RNVC: 2
416470: RNCC: 5 | RNVC: 9

17 Dec 1981

5120-12-350-5720
Montierdorn

123505720
669 226 00: RNCC: 3 | RNVC: 2
669 226 00: RNCC: 5 | RNVC: 2

17 Apr 2000

5120-12-022-7386

5120-12-368-6494
Open End Box Wrench

123686494
121-13X14: RNCC: 3 | RNVC: 2
00.27.87.71: RNCC: 5 | RNVC: 2

4 Apr 2006

5120-12-359-6716
Eindrueckwerkzeugte

123596716
T631P3001101: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-092-2294

5120-12-303-2303
Socket Wrench

123032303
33BPN4: RNCC: 3 | RNVC: 9

7 Mar 1985

5120-12-193-4864
Bearing And Bushing Inserter

121934864
116 589 08 61 00: RNCC: 3 | RNVC: 2
116589086100: RNCC: 3 | RNVC: 2

27 Jul 1982

5120-12-133-5962
Jaw Cable Grip

121335962
NO PRIMARY REF 12-133-5962: RNCC: 3 | RNVC: 2
DIN48342: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-363-8405
Bearing And Bushing Inserter And Remover

123638405
GSE202: RNCC: 3 | RNVC: 2

29 Jul 2004

5120-12-307-5363
Torque Wrench

123075363
C249-A39-B30: RNCC: 2 | RNVC: 2
C249-A39-B30: RNCC: 3 | RNVC: 2

27 Jun 1986

5120-12-307-3600
Spanner Wrench

123073600
31381: RNCC: 3 | RNVC: 2
10513-000: RNCC: 5 | RNVC: 2
BFA31381: RNCC: 5 | RNVC: 2

10 Jun 1986

5120-12-372-0962
Open End Wrench

123720962
13Y00-3153-04.003: RNCC: 2 | RNVC: 2
13Y00-3153-04.003: RNCC: 3 | RNVC: 2
176344: RNCC: 5 | RNVC: 2

18 Jun 2007

5120-12-388-5159
Socket Wrench

123885159
200.096: RNCC: 3 | RNVC: 2

28 Mar 2012

5120-12-301-9973
Socket Wrench Handle Bar

123019973
6165810303: RNCC: 3 | RNVC: 2

24 Nov 1984

5120-12-141-1146

5120-12-313-6929

5120-12-179-7309
Stuetzrohr

121797309
5900063-213000.00: RNCC: 2 | RNVC: 2
5900063-213000.00: RNCC: 3 | RNVC: 2
5900063-213000-00: RNCC: 5 | RNVC: 2

25 Jul 1979

5120-12-371-7314
Bearing And Bushing Inserter

123717314
80996040114: RNCC: 3 | RNVC: 2
80.99604-0114: RNCC: 5 | RNVC: 2

9 May 2007

5120-12-312-3270
Montierwerk Huelse

123123270
VW519: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-12-127-3973

5120-12-390-5557
Pliers Set

123905557
351212203211: RNCC: 3 | RNVC: 2

23 Nov 2012

5120-12-311-0941
Seal Inserter

123110941
395589001500: RNCC: 3 | RNVC: 2

24 Jul 1987

5120-12-358-7769
Montierdorn

123587769
80996060078: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-139-8566
Ventil Heber

121398566
3125890231: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-313-2691
Face Spanner Wrench Socket

123132691
28030-01: RNCC: 3 | RNVC: 2
HD28030: RNCC: 5 | RNVC: 2

17 Mar 1988

5120-12-353-4442
Socket Wrench

123534442
28M-10: RNCC: 3 | RNVC: 2
1834678: RNCC: 5 | RNVC: 2

23 Mar 2001

5120-12-364-3459
Socket Head Screw Key

123643459
43150009-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-316-8486
Hand Terminal Crimping Tool

123168486
PZ3: RNCC: 3 | RNVC: 2
5673.0: RNCC: 5 | RNVC: 2

17 Feb 1989

5120-12-343-8657
Hand Hammer

123438657
2153: RNCC: 3 | RNVC: 2
02153000000: RNCC: 5 | RNVC: 2

7 Aug 1997

5120-12-172-6203
Box Wrench

121726203
30-79350-5090: RNCC: 3 | RNVC: 2

31 Jan 1978

5120-12-374-6187
Electronic Component Inserter And Remover

123746187
1141108-00: RNCC: 3 | RNVC: 2

29 Feb 2008

5120-12-363-9547
Bearing And Bushing Inserter

123639547
T671P5002109: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-140-9226
Nockenw Halteeisen

121409226
4630A: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-139-3096
Torque Wrench

121393096
NO PRIMARY REF 12-139-3096: RNCC: 3 | RNVC: 2
091M00100: RNCC: 5 | RNVC: 2
0015890021: RNCC: 5 | RNVC: 2
23042: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-7578
K Aufdrueck- Huelse

121467578
02067: RNCC: 3 | RNVC: 2
25704-360470.01.0: RNCC: 3 | RNVC: 2
25704-360470-01-0: RNCC: 5 | RNVC: 2
02067: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-372-6531
Cross Tip Screwdriver

123726531
BE-8800: RNCC: 3 | RNVC: 2
7314150042012: RNCC: 5 | RNVC: 2

8 Aug 2007

5120-12-351-2760
Face Spanner Wrench Socket

123512760
3099-00-410000: RNCC: 3 | RNVC: 2

10 Jul 2000

5120-12-177-3653
Abzieh- Huelse

121773653
1476013000: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-331-8512
Spanner Wrench

123318512
523510-9004 904: RNCC: 3 | RNVC: 2

28 Jun 1993

5120-12-329-9928
Spanner Wrench

123299928
1X56 136 702: RNCC: 3 | RNVC: 2
1X56136702: RNCC: 5 | RNVC: 2
V136702: RNCC: 5 | RNVC: 9

20 Oct 1992

5120-12-120-9502

5120-12-172-9075
Inspection Mirror

121729075
67980: RNCC: 3 | RNVC: 2
250A-22-2200: RNCC: 5 | RNVC: 2
250A-22-2200: RNCC: 5 | RNVC: 9
6798: RNCC: 5 | RNVC: 9
67980: RNCC: 5 | RNVC: 9

2 Mar 1978

5120-12-318-0777
Flat Tip Screwdriver

123180777
04155: RNCC: 3 | RNVC: 9

8 Jun 1989

5120-12-338-7700
Spanner Wrench

123387700
ZR06A: RNCC: 3 | RNVC: 9

23 Aug 1995

5120-12-361-8469
Socket Wrench Set

123618469
20EMU-10: RNCC: 3 | RNVC: 2
6162220: RNCC: 5 | RNVC: 2

24 Nov 2003

5120-12-328-1174
Pin Remover

123281174
4900259-202100-00-02: RNCC: 2 | RNVC: 2
536.50-35.00: RNCC: 3 | RNVC: 2
VS5026Z424: RNCC: 5 | RNVC: 9
536.50-35.00: RNCC: 5 | RNVC: 9

8 Apr 1992

5120-12-123-5475
Socket Wrench

121235475
26R9X10: RNCC: 3 | RNVC: 2
08111201171: RNCC: 5 | RNVC: 2
B9X10DIN896: RNCC: 5 | RNVC: 9
DIN896-B9X10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-139-3070
Auf- Und Abpreszvor

121393070
820589223300: RNCC: 3 | RNVC: 2
8205892233: RNCC: 3 | RNVC: 2
007M00100: RNCC: 3 | RNVC: 2
820589223300: RNCC: 5 | RNVC: 2
820589223300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-339-9474
Ge Montierwerkzeug

123399474
DKAY003: RNCC: 3 | RNVC: 2

6 Feb 1996

5120-12-313-9000
Open End Wrench

123139000
4300001: RNCC: 3 | RNVC: 2
4300044: RNCC: 5 | RNVC: 2

18 May 1988

5120-12-389-2783
Drive Pin Punch

123892783
611589009921: RNCC: 3 | RNVC: 2
611589009921: RNCC: 5 | RNVC: 2

15 Jun 2012

5120-12-320-6974
Mechanical Puller Attachment

123206974
2996.66.83: RNCC: 3 | RNVC: 2

8 Feb 1990

5120-12-199-0762

5120-12-316-1453
Mechanical Puller Attachment

123161453
1X56136593: RNCC: 3 | RNVC: 2

24 Dec 1988

5120-12-312-2474
Socket Wrench

123122474
105-45051W6: RNCC: 3 | RNVC: 2

8 Dec 1987

5120-12-334-3262
Drive Pin Punch

123343262
1000246-92000.01: RNCC: 2 | RNVC: 2
1000246-92000.01: RNCC: 3 | RNVC: 2

27 Apr 1994

5120-12-179-4950
Torque Wrench Adapter

121794950
TL5120-0086-880: RNCC: 2 | RNVC: 2
733/10-19: RNCC: 3 | RNVC: 2
58231019: RNCC: 5 | RNVC: 2
F30038493: RNCC: 5 | RNVC: 9
7452-9 19: RNCC: 5 | RNVC: 9
22/DC-19: RNCC: 5 | RNVC: 9
6263110019: RNCC: 5 | RNVC: 9
6612C-19: RNCC: 5 | RNVC: 9
(241)A4249F30038493: RNCC: 8 | RNVC: 2
F30038493: RNCC: 8 | RNVC: 2

2 Jul 1979

5120-12-169-6591
Tap And Reamer Wrench

121696591
207172: RNCC: 3 | RNVC: 2
7020WH-M5-12: RNCC: 3 | RNVC: 2
PED100-2: RNCC: 3 | RNVC: 2
4832-2: RNCC: 5 | RNVC: 9
7020: RNCC: 5 | RNVC: 9
4832-5-12: RNCC: 5 | RNVC: 9

31 May 1977

5120-12-126-2578

5120-12-316-1963
Socket Wrench Adapter-Extension

123161963
F30373589: RNCC: 3 | RNVC: 2

30 Dec 1988

5120-12-390-2164
Mechanical Puller Adapter

123902164
F6370988: RNCC: 3 | RNVC: 2

17 Oct 2012

5120-12-124-9103

5120-12-312-5165
Ge Montierwerkzeug

123125165
123 589 02 59 00: RNCC: 3 | RNVC: 2
123589025900: RNCC: 5 | RNVC: 2

14 Jan 1988

5120-12-094-1272

5120-12-344-6013
Bearing And Bushing Inserter

123446013
1X56136469: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-337-5482
Mechanical Puller

123375482
63092401: RNCC: 3 | RNVC: 2

10 Mar 1995

5120-12-195-2075
Socket Wrench

121952075
DIN7440-19X300: RNCC: 2 | RNVC: 2
138419: RNCC: 3 | RNVC: 2
9537-19: RNCC: 3 | RNVC: 2
2900L-VDE19: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-12-152-7962
Ausbauvorrichtung

121527962
CH1989-11: RNCC: 3 | RNVC: 2
3-415-0-018-068-6: RNCC: 5 | RNVC: 2
1205 1877: RNCC: 5 | RNVC: 2
WA28449: RNCC: 5 | RNVC: 9
3-415-0-018-068-6: RNCC: 5 | RNVC: 9
CH1989-11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-358-1816
Pliers

123581816
960-185: RNCC: 3 | RNVC: 2

24 Sep 2002

5120-12-305-3544
Mechanical Puller Attachment

123053544
21-00: RNCC: 3 | RNVC: 2

25 Oct 1985

5120-12-177-2187
Socket Wrench Socket

121772187
NO PRIMARY REF 12-177-2187: RNCC: 3 | RNVC: 2
01720095: RNCC: 5 | RNVC: 9
40EL4BA: RNCC: 5 | RNVC: 9

19 Jan 1979

5120-12-171-9964
Zeiger Abheber

121719964
4263007: RNCC: 3 | RNVC: 2
3617: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-335-9396
Zentrier- Ring

123359396
0851 6292: RNCC: 3 | RNVC: 2
8516292: RNCC: 5 | RNVC: 2

4 Oct 1994

5120-12-380-2640
Drive Pin Punch

123802640
350762: RNCC: 3 | RNVC: 2
94191-010 W2: RNCC: 5 | RNVC: 2

13 Oct 2009

5120-12-379-6893
Socket Head Screw Key

123796893
2115-T27: RNCC: 3 | RNVC: 2
760-TX27: RNCC: 3 | RNVC: 2
500-270-08: RNCC: 3 | RNVC: 2
10766-T27: RNCC: 3 | RNVC: 2
4000896012169: RNCC: 5 | RNVC: 2
00.43.07.39: RNCC: 5 | RNVC: 2
43220027: RNCC: 5 | RNVC: 2

24 Aug 2009

5120-12-390-1201
Seal Inserter

123901201
405589161500: RNCC: 3 | RNVC: 2

8 Oct 2012

5120-12-323-4925
Mechanical Puller

123234925
3457730EF6102-85: RNCC: 3 | RNVC: 2

30 Nov 1990

5120-12-181-9198

5120-12-002-2076

5120-12-193-6671

5120-12-345-3726
Seal Inserter

123453726
F3 0147397: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-139-3034
Dorn

121393034
8205890443: RNCC: 3 | RNVC: 2
016M12200: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-129-3339

5120-12-156-1484
Gewindeschutzkappe

121561484
VG95211-ML-121561484: RNCC: 2 | RNVC: 2
160-88742-04: RNCC: 3 | RNVC: 2
160-88742-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-8964
Tap Extractor

123688964
33-1B: RNCC: 3 | RNVC: 2
01.98.79.91: RNCC: 5 | RNVC: 2

4 May 2006

5120-12-374-8422
Box Wrench

123748422
615-16X18: RNCC: 3 | RNVC: 2
00.29.98.88: RNCC: 5 | RNVC: 2

31 Mar 2008

5120-12-198-7377
Socket Head Screw Key

121987377
1997LM12: RNCC: 3 | RNVC: 2

22 Feb 1984

5120-12-010-9621

5120-12-329-9662
Mechanical Puller Attachment

123299662
0852 5118.008: RNCC: 3 | RNVC: 2
8525118.008: RNCC: 5 | RNVC: 2

16 Oct 1992

5120-12-357-6290
Montierdorn

123576290
F6279876: RNCC: 3 | RNVC: 2

8 Jul 2002

5120-12-301-4974
Socket Head Screw Key Blade

123014974
4065810166: RNCC: 3 | RNVC: 2

19 Oct 1984

5120-12-350-4781
Spanner Wrench

123504781
3272: RNCC: 3 | RNVC: 2

4 Apr 2000

5120-12-334-9946
Drive Pin Punch

123349946
F30273064: RNCC: 3 | RNVC: 2

8 Jul 1994

5120-12-353-2084
Socket Wrench

123532084
CBD45074P01: RNCC: 3 | RNVC: 2

12 Feb 2001

5120-12-198-2453
Screw Thread Insert Inserter

121982453
01500224400: RNCC: 3 | RNVC: 2

5 Jan 1984

5120-12-352-6897
Torque Wrench

123526897
7113B: RNCC: 3 | RNVC: 9

6 Dec 2000

5120-12-387-4287
Crimping Tool Die

123874287
D35: RNCC: 3 | RNVC: 2

14 Dec 2011

5120-12-193-0672
Torque Wrench Adapter

121930672
TL5120-0086-510: RNCC: 2 | RNVC: 2
732/10-17: RNCC: 3 | RNVC: 2
58221017: RNCC: 5 | RNVC: 2
6630C-17: RNCC: 5 | RNVC: 9
7452-8 17: RNCC: 5 | RNVC: 9
21/DC-17: RNCC: 5 | RNVC: 9
6263110029: RNCC: 5 | RNVC: 9

16 Jun 1982

5120-12-367-1077
Montierwerk Huelse

123671077
0907927: RNCC: 3 | RNVC: 2

11 Jul 2005

5120-12-131-4939
Einste Verdrehhebel

121314939
038M01000: RNCC: 3 | RNVC: 2
244019: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-345-3531
Hand Hydraulic Jack

123453531
98444084: RNCC: 3 | RNVC: 2

4 Mar 1998

5120-12-309-3861
Preformed Packing Inserter

123093861
5100248-01: RNCC: 2 | RNVC: 2
5100248-01: RNCC: 3 | RNVC: 2

21 Jan 1987

5120-12-364-9580
Swivel Knob Jeweler's Screwdriver

123649580
T4838XESD15: RNCC: 3 | RNVC: 2

18 Nov 2004

5120-12-371-9377
Zangensatz

123719377
535295: RNCC: 3 | RNVC: 2
4007875352957: RNCC: 5 | RNVC: 2

31 May 2007

5120-12-127-2805
Mechanical Puller

121272805
4642: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-6544

5120-12-364-6788
Socket Wrench Socket

123646788
03010016-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-311-6712
Claw Bar

123116712
NM268: RNCC: 3 | RNVC: 2
NM268: RNCC: 5 | RNVC: 9

5 Oct 1987

5120-12-196-3967
Plier Clamp

121963967
511: RNCC: 3 | RNVC: 2
2578: RNCC: 3 | RNVC: 2
138X: RNCC: 3 | RNVC: 2
5890002: RNCC: 3 | RNVC: 2
196R: RNCC: 3 | RNVC: 2
196010: RNCC: 5 | RNVC: 2

4 Jul 1983

5120-12-132-1104

5120-12-356-7952
Open End Box Wrench

123567952
17.000.0231.00: RNCC: 3 | RNVC: 2

8 Apr 2002

5120-12-304-5229
Schluesseleinsatz

123045229
31R18: RNCC: 3 | RNVC: 2
624616: RNCC: 5 | RNVC: 2

26 Jul 1985

5120-12-363-9278
Bearing And Bushing Inserter And Remover

123639278
T670P5001280: RNCC: 3 | RNVC: 2

5 Aug 2004

5120-12-129-5570

5120-12-129-6232
Spanner Wrench

121296232
5066993: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-187-8648
Einbauvorrichtung

121878648
93262-23: RNCC: 3 | RNVC: 2

13 May 1981

5120-12-353-6707
Spanner Wrench

123536707
2125-129694A00C: RNCC: 2 | RNVC: 2
2125-129694A00C: RNCC: 3 | RNVC: 2
2125-129694A00C: RNCC: 5 | RNVC: 2

25 Apr 2001

5120-12-171-0561
Pliers

121710561
355589003700: RNCC: 3 | RNVC: 2

1 Sep 1977

5120-12-355-4988
Socket Wrench Screwdriver Attachment

123554988
5584409: RNCC: 3 | RNVC: 2

20 Nov 2001

5120-12-126-5432
Spanner Wrench

121265432
4015890005: RNCC: 3 | RNVC: 2
4015890005: RNCC: 3 | RNVC: 9
401589000500: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-2521
Schluessel

121392521
072M02600: RNCC: 3 | RNVC: 2
VB64268: RNCC: 5 | RNVC: 2
VB64268: RNCC: 5 | RNVC: 2
VB64268: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-342-2579
Seal Inserter

123422579
5870048118: RNCC: 3 | RNVC: 2

13 Jan 1997

5120-12-373-5007
Hand Blind Riveter

123735007
VNG361: RNCC: 3 | RNVC: 2
310.361.000.000: RNCC: 5 | RNVC: 2

9 Nov 2007

5120-12-384-5821
Torque Wrench Adapter

123845821
58250080: RNCC: 3 | RNVC: 2
4018754109616: RNCC: 5 | RNVC: 2
735/80: RNCC: 5 | RNVC: 2

10 Mar 2011

5120-12-176-2816
Mechanical Puller

121762816
23290-269030: RNCC: 2 | RNVC: 2

23 Nov 1978

5120-12-195-8462
Face Spanner Wrench Socket

121958462
5182045: RNCC: 3 | RNVC: 2

25 Apr 1983

5120-12-350-2568
Bl Ausbeulwerkzeug

123502568
554: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-354-0322
Spanner Wrench

123540322
714589050700: RNCC: 3 | RNVC: 2

29 May 2001

5120-12-021-2556

5120-12-342-1902
Eindrueckwerkzeug

123421902
287.68.390: RNCC: 3 | RNVC: 9

24 Dec 1996

5120-12-311-2615
Hammer Aufnahme

123112615
23114-4130.06: RNCC: 2 | RNVC: 2
23114-4130-06: RNCC: 3 | RNVC: 2
23114-4130-06: RNCC: 5 | RNVC: 2
23114-4130-06: RNCC: 5 | RNVC: 9

11 Aug 1987

5120-12-329-4570
Zange Einsatz

123294570
621-60810: RNCC: 3 | RNVC: 2

21 Aug 1992

5120-12-177-3183
Abstuetzplatte

121773183
23290-268080.003: RNCC: 2 | RNVC: 2
23290-268080.003: RNCC: 3 | RNVC: 2
23290-268080-003: RNCC: 5 | RNVC: 9
23290-268080.003: RNCC: 5 | RNVC: 9

29 Jan 1979

5120-12-390-6002
Hand Terminal Crimping Tool

123906002
351212203181: RNCC: 3 | RNVC: 2

27 Nov 2012

5120-12-344-6441
Seal Inserter

123446441
99374221: RNCC: 3 | RNVC: 2

19 Nov 1997

5120-12-375-5352
Slip Joint Pliers

123755352
87 11 250: RNCC: 3 | RNVC: 2
4003773022107: RNCC: 5 | RNVC: 2
8711250: RNCC: 5 | RNVC: 9

11 Jun 2008

5120-12-169-2817
Screw Thread Insert Tang Breakoff Tool

121692817
01584030000: RNCC: 3 | RNVC: 2
01581030000: RNCC: 5 | RNVC: 9
01581676000: RNCC: 5 | RNVC: 9

3 May 1977

5120-12-364-6303
Socket Wrench Crowfoot Attachment

123646303
02190024-TCS: RNCC: 3 | RNVC: 2

15 Oct 2004

5120-12-383-6413
Pipe Wrench

123836413
83 20 020: RNCC: 3 | RNVC: 2
4003773014232: RNCC: 5 | RNVC: 2
1223303: RNCC: 5 | RNVC: 2

17 Nov 2010

5120-12-131-4638

5120-12-368-2602
Offset Screwdriver Set

123682602
96432701-TCS: RNCC: 3 | RNVC: 2

18 Jan 2006

5120-12-385-5824
Mecha Fitting Tool

123855824
F6278201: RNCC: 3 | RNVC: 2

17 Jun 2011

5120-12-190-1908
Abziehscheibe

121901908
NO PRIMARY REF 12-190-1908: RNCC: 3 | RNVC: 2
416480: RNCC: 5 | RNVC: 2
416480: RNCC: 5 | RNVC: 9

10 Nov 1981

5120-12-124-8881
Rueckspulvorrichtun

121248881
TL5120-0020: RNCC: 2 | RNVC: 9
510114: RNCC: 5 | RNVC: 9
622-000: RNCC: 5 | RNVC: 9
5120-0020: RNCC: 5 | RNVC: 9
5120-020: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-7332
Druckstueck

121767332
VG95211-ML-121767332: RNCC: 2 | RNVC: 2
105-10151W3.03: RNCC: 3 | RNVC: 2
105-10151W3-03: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-185-5516
Hole Sheet Metal Holder

121855516
2071Z-48: RNCC: 3 | RNVC: 2
2071Z48: RNCC: 5 | RNVC: 2
229-2071Z-48: RNCC: 5 | RNVC: 2

14 Oct 1980

5120-12-309-8816
Rohrbiege Aufnahme

123098816
840529-20.00: RNCC: 3 | RNVC: 2

16 Mar 1987

5120-12-196-8666
An Montierwerkzeug

121968666
5801411-60: RNCC: 3 | RNVC: 2

29 Aug 1983

5120-12-174-1492
Pinch Bar

121741492
029185101: RNCC: 3 | RNVC: 2
C029185101: RNCC: 5 | RNVC: 9

7 Jun 1978

5120-12-363-8868
Bearing And Bushing Inserter

123638868
T670P5001242: RNCC: 3 | RNVC: 2

3 Aug 2004

5120-12-332-9811
Spanner Wrench

123329811
327589000500: RNCC: 3 | RNVC: 2

18 Oct 1993

5120-12-336-2818
Mechanical Puller Attachment

123362818
4434381100: RNCC: 3 | RNVC: 2

7 Nov 1994

5120-12-382-6888
Hand Terminal Crimping Tool

123826888
HU41447: RNCC: 3 | RNVC: 2
HU33096: RNCC: 3 | RNVC: 9

26 Jul 2010

5120-12-140-1270

5120-12-315-3205
Hyd Ausbauwerkzeug

123153205
4900153-31310-00-05: RNCC: 3 | RNVC: 2
4900153-31310-05: RNCC: 5 | RNVC: 2

12 Oct 1988

5120-12-368-1239
Torque Wrench Adapter

123681239
731-40-18: RNCC: 3 | RNVC: 2
58214018: RNCC: 5 | RNVC: 2

12 Dec 2005

5120-12-126-6425
Richt- Platte

121266425
RM1500X1000/100: RNCC: 3 | RNVC: 2
RR1500X1000: RNCC: 5 | RNVC: 9
545A201-1500X1000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-339-1120
Lamp Cap Extractor

123391120
SIZ890-9F621-06: RNCC: 3 | RNVC: 2
9F621-06: RNCC: 5 | RNVC: 2

11 Oct 1995

5120-12-339-9588
Mechanical Puller

123399588
5068502: RNCC: 3 | RNVC: 2
698-430-0031: RNCC: 5 | RNVC: 2

6 Feb 1996

5120-12-140-9179
Dorn

121409179
141900: RNCC: 3 | RNVC: 2
4624: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-362-4012
Socket Head Screw Key

123624012
T4881XESD08: RNCC: 3 | RNVC: 2

17 Feb 2004

5120-12-363-3290
Seil Haltewerkzeug

123633290
B00080: RNCC: 3 | RNVC: 2

27 May 2004

5120-12-150-8218
Ableiter Auszieher

121508218
NO PRIMARY REF 12-150-8218: RNCC: 3 | RNVC: 2
Q06554-A1-A3: RNCC: 5 | RNVC: 9
C65055A751A51: RNCC: 5 | RNVC: 9
Q06554A1A3: RNCC: 5 | RNVC: 9
Q06554A1A3: RNCC: 5 | RNVC: 9
Q06554A1A3: RNCC: 5 | RNVC: 9
C65055A751A51: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-3470
Combination Box And Open End Wrench

123643470
40081212-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-177-5447
Electronic Equipment Alignment Tool

121775447
1-156: RNCC: 3 | RNVC: 2

5 Feb 1979

5120-12-133-4769
Festhaltebuegel

121334769
2L17568: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-363-9691
Bearing And Bushing Inserter

123639691
T671P5002206: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-388-7951
Installation And Re

123887951
027.019: RNCC: 3 | RNVC: 2
027.019: RNCC: 5 | RNVC: 2

24 Apr 2012

5120-12-139-3131

5120-12-327-2935
Ratchet Wrench

123272935
41BV30: RNCC: 3 | RNVC: 2
633860: RNCC: 5 | RNVC: 2

7 Jan 1992

5120-12-342-2745
Electronic Equipment Alignment Tool

123422745
4856A: RNCC: 3 | RNVC: 2

15 Jan 1997

5120-12-329-5236
Socket Wrench Socket

123295236
58918560: RNCC: 3 | RNVC: 2
52565560: RNCC: 5 | RNVC: 9

27 Aug 1992

5120-12-364-9579
Socket Wrench

123649579
T4840WESD55: RNCC: 3 | RNVC: 2

18 Nov 2004

5120-12-384-7478
Screw Thread Insert Inserter

123847478
F30008737: RNCC: 3 | RNVC: 2

24 Mar 2011

5120-12-390-3979
Bearing And Bushing Inserter

123903979
F30377627: RNCC: 3 | RNVC: 2

8 Nov 2012

5120-12-390-1550
Magnetic Retrieving Tool

123901550
3091: RNCC: 3 | RNVC: 2
KV2081: RNCC: 5 | RNVC: 2

10 Oct 2012

5120-12-331-6071
Mechanical Puller Attachment

123316071
1X56122206: RNCC: 3 | RNVC: 2

27 May 1993

5120-12-333-8676
Schluessel

123338676
352589046300: RNCC: 3 | RNVC: 2

18 Feb 1994

5120-12-172-1873
Spannbacke

121721873
VG95211-ML-121721873: RNCC: 2 | RNVC: 2
3S51614-0000: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-172-1852
Open End Wrench

121721852
903-812-0116: RNCC: 3 | RNVC: 2
903-812-0116: RNCC: 5 | RNVC: 9

3 Jan 1978

5120-12-330-3420
Stanz- Stempelsatz

123303420
TL5120-0059-20: RNCC: 2 | RNVC: 2

3 Dec 1992

5120-12-374-3700
Socket Wrench Extension

123743700
13010006-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-140-9687
Spanner Wrench

121409687
0277086304: RNCC: 3 | RNVC: 2
0277086204: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-181-9725
Buchse Auszieher

121819725
VW228B: RNCC: 3 | RNVC: 9

28 Dec 1979

5120-12-358-8974
Electrical Contact Remover

123588974
80996060294: RNCC: 3 | RNVC: 2

26 Nov 2002

5120-12-121-1107
Drive Pin Punch

121211107
594S3-8: RNCC: 3 | RNVC: 2
594S3-8X125: RNCC: 3 | RNVC: 2
574D021-3-8: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-306-6436
Open End Wrench

123066436
5-801-0320: RNCC: 3 | RNVC: 2

18 Mar 1986

5120-12-383-8298
Pipe Wrench

123838298
0530850C: RNCC: 3 | RNVC: 2

10 Dec 2010

5120-12-358-1545
Socket Wrench

123581545
7151601: RNCC: 3 | RNVC: 2
715 16 01: RNCC: 5 | RNVC: 2

19 Sep 2002

5120-12-380-2888
Screwdriver Bit Set And Handle

123802888
31499: RNCC: 3 | RNVC: 2
2691T11ESD: RNCC: 5 | RNVC: 2

15 Oct 2009

5120-12-343-8664
Mechanical Puller

123438664
2256-3: RNCC: 3 | RNVC: 2
02256000360: RNCC: 5 | RNVC: 2

7 Aug 1997

5120-12-312-5858
Spanner Wrench

123125858
170463: RNCC: 3 | RNVC: 2
170463: RNCC: 5 | RNVC: 9
170463: RNCC: 5 | RNVC: 9

19 Jan 1988

5120-12-383-2408
Socket Wrench

123832408
F30450844: RNCC: 3 | RNVC: 2

28 Sep 2010

5120-12-044-4904

5120-12-334-3206
Socket Wrench

123343206
35A-27: RNCC: 3 | RNVC: 2
DIN3112-K27: RNCC: 4 | RNVC: 1
630616: RNCC: 5 | RNVC: 2
35A-27: RNCC: 5 | RNVC: 2

27 Apr 1994

5120-12-143-9486
Durch Richt- Dorn

121439486
1013-100W7: RNCC: 2 | RNVC: 2
300 575: RNCC: 3 | RNVC: 2
1013-100W7: RNCC: 5 | RNVC: 2
1013-100 W7: RNCC: 5 | RNVC: 9
1013-100W7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-302-4599
Mechanical Finger

123024599
5870281013: RNCC: 3 | RNVC: 2
5870281013: RNCC: 5 | RNVC: 9
KDW26/72: RNCC: 5 | RNVC: 9

29 Dec 1984

5120-12-364-5929
Spanner Wrench

123645929
12202810: RNCC: 3 | RNVC: 2
12.2028.10: RNCC: 5 | RNVC: 2

13 Oct 2004

5120-12-368-3993
Spring Inserter And Remover

123683993
348670: RNCC: 3 | RNVC: 2

7 Mar 2006

5120-12-380-5250
Socket Head Screw Key

123805250
06315304: RNCC: 3 | RNVC: 2

5 Nov 2009

5120-12-354-8978
Torque Handle

123548978
4300-01: RNCC: 3 | RNVC: 2
4300-01: RNCC: 3 | RNVC: 2

3 Sep 2001

5120-12-308-1143
Blindni Mundstueck

123081143
GBM30-391: RNCC: 3 | RNVC: 2
391: RNCC: 5 | RNVC: 2
7222912: RNCC: 5 | RNVC: 2

3 Sep 1986

5120-12-152-3328
Mechanical Puller

121523328
WE40308: RNCC: 3 | RNVC: 2
WE40308: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-020-5632

5120-12-181-9545
Mechanical Puller Attachment

121819545
01TC33104: RNCC: 3 | RNVC: 2

28 Dec 1979

5120-12-331-6053
Seal Inserter

123316053
80996046009: RNCC: 3 | RNVC: 2
V1125: RNCC: 5 | RNVC: 2
80.99604.6009: RNCC: 5 | RNVC: 2

27 May 1993

5120-12-373-3520
Mechanical Puller

123733520
L133M6302101: RNCC: 3 | RNVC: 2

24 Oct 2007

5120-12-376-8874
Spanner Wrench

123768874
4055810027: RNCC: 3 | RNVC: 2

17 Nov 2008

5120-12-364-4833
Socket Wrench Crowfoot Attachment

123644833
01210010-TCS: RNCC: 3 | RNVC: 2

1 Oct 2004

5120-12-385-6940
Engine Valve Seat Insert Replacing Tool

123856940
63139200: RNCC: 3 | RNVC: 2

30 Jun 2011

5120-12-349-7295
Hand Hammer

123497295
2107: RNCC: 3 | RNVC: 2
10956-60: RNCC: 3 | RNVC: 2
00.74.09.37: RNCC: 5 | RNVC: 2
70170060: RNCC: 5 | RNVC: 2

4 Jan 2000

5120-12-133-3685
Abziehvorrichtung

121333685
440-181: RNCC: 3 | RNVC: 2
4D17248: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-1777
Hand Vise

121261777
TL5120-0098-010: RNCC: 2 | RNVC: 2
500-85: RNCC: 3 | RNVC: 2
51016085: RNCC: 5 | RNVC: 9
3247-26: RNCC: 5 | RNVC: 9
TK-KG55-5120-302-010: RNCC: 5 | RNVC: 9
TK5120-302-010: RNCC: 5 | RNVC: 9
5180-0083-14: RNCC: 5 | RNVC: 9
5180-083-14: RNCC: 5 | RNVC: 9
TL5180-0083-14: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-189-4696
Mechanical Puller

121894696
363589013300: RNCC: 3 | RNVC: 2

29 Sep 1981

5120-12-368-1117
Pliers

123681117
65406120-TCS: RNCC: 3 | RNVC: 2

8 Dec 2005

5120-12-126-5825
Glas Abheber

121265825
NO PRIMARY REF 12-126-5825: RNCC: 3 | RNVC: 2
5180-042ABHERGLAS60MMD: RNCC: 5 | RNVC: 9
TL5180-0042ABHERGLAS60MMD: RNCC: 5 | RNVC: 9
5180-0042ABHERGLAS60MMD: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-320-5616
Multiposition Vise

123205616
877800-45: RNCC: 3 | RNVC: 2
87780: RNCC: 5 | RNVC: 2

26 Jan 1990

5120-12-133-4651

5120-12-092-0234

5120-12-191-2736
Open End Wrench

121912736
1203 0375: RNCC: 3 | RNVC: 2
CH1603-1: RNCC: 5 | RNVC: 2
1203 0375: RNCC: 5 | RNVC: 9
12030375: RNCC: 5 | RNVC: 9
3-601-0-018-001-4: RNCC: 5 | RNVC: 9
3.601.0.018.001.4: RNCC: 5 | RNVC: 9
3.601.0.018.001.4: RNCC: 5 | RNVC: 9
2-46: RNCC: 5 | RNVC: 9

21 Jan 1982

5120-12-358-1814
Cross Tip Screwdriver Set

123581814
656 S4: RNCC: 3 | RNVC: 2

24 Sep 2002

5120-12-123-5516

5120-12-092-2884

5120-12-169-2815
Ei Vorspann- Huelse

121692815
01500605032: RNCC: 3 | RNVC: 2
01556050021: RNCC: 5 | RNVC: 9

3 May 1977

5120-12-132-4143
Hand Blind Riveter

121324143
348170: RNCC: 3 | RNVC: 2
349045: RNCC: 5 | RNVC: 2
K49045: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-364-5659
Socket Wrench Crowfoot Attachment

123645659
02200015-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-172-9112
Schwenkvorrichtung

121729112
VG95211-ML-121729112: RNCC: 2 | RNVC: 2
1X56 136 651: RNCC: 3 | RNVC: 2
1X56136651: RNCC: 5 | RNVC: 2

2 Mar 1978

5120-12-198-7375
Fixed Open End Wrench Set

121987375
NO PRIMARY REF 12-198-7375: RNCC: 3 | RNVC: 2
1953Z6: RNCC: 5 | RNVC: 9

22 Feb 1984

5120-12-363-0194
Dreh Haltewerkzeug

123630194
4999004-100: RNCC: 3 | RNVC: 2

24 Apr 2004

5120-12-130-7963
Einschlag- Huelse

121307963
NO PRIMARY REF 12-130-7963: RNCC: 3 | RNVC: 2
1241: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-394-0836
Mecha Ejector Tool

123940836
11.49200-0285: RNCC: 3 | RNVC: 2
11.49200-0285: RNCC: 5 | RNVC: 2

5 Nov 2013

5120-12-392-7308
Socket Wrench Socket

123927308
SEWZG006: RNCC: 3 | RNVC: 2

2 Jul 2013

5120-12-357-7050
Screwdriver Bit Set And Handle

123577050
8576A: RNCC: 3 | RNVC: 2

15 Jul 2002

5120-12-133-4652

5120-12-174-4218
Electronic Equipment Alignment Tool

121744218
1900TRA: RNCC: 3 | RNVC: 2

29 Jun 1978

5120-12-315-8973
We Montierwerkzeug

123158973
0009419329: RNCC: 3 | RNVC: 2

6 Dec 1988

5120-12-339-1129
Bearing And Bushing Inserter

123391129
5870 050 011: RNCC: 3 | RNVC: 2
141.5870.050011: RNCC: 5 | RNVC: 2

11 Oct 1995

5120-12-325-1312
Mechanical Puller Step Plate

123251312
1000173-992000.005.0: RNCC: 2 | RNVC: 2
1000173-992000.005.0: RNCC: 3 | RNVC: 2

7 May 1991

5120-12-334-5427
Eindrueckwerkzeugte

123345427
427 589 00 43 00: RNCC: 3 | RNVC: 2

20 May 1994

5120-12-379-0640
Rotat Holding Tool

123790640
F6553635: RNCC: 3 | RNVC: 2

19 Jun 2009

5120-12-123-5866

5120-12-390-4151
Bearing And Bushing Inserter And Remover

123904151
B80144988: RNCC: 3 | RNVC: 2

9 Nov 2012

5120-12-356-0321
Torque Wrench

123560321
7035: RNCC: 3 | RNVC: 2

15 Jan 2002

5120-12-005-0192

5120-12-369-5740
Torque Wrench

123695740
4550-55: RNCC: 3 | RNVC: 2
4550-55: RNCC: 3 | RNVC: 2

26 Jul 2006

5120-12-178-0129
Socket Head Screw Key

121780129
1997LM7: RNCC: 3 | RNVC: 2
105888: RNCC: 5 | RNVC: 2
1997LM7MM: RNCC: 5 | RNVC: 9
42L7: RNCC: 5 | RNVC: 9

14 Mar 1979

5120-12-359-6699
Bearing And Bushing Inserter And Remover

123596699
T622P3008051: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-351-5278
Montierhuelse

123515278
9254944000: RNCC: 3 | RNVC: 2

1 Aug 2000

5120-12-340-5046
Spanner Wrench

123405046
264-794: RNCC: 3 | RNVC: 2
163158: RNCC: 5 | RNVC: 2

24 Apr 1996

5120-12-321-9291
Socket Wrench

123219291
771-19T: RNCC: 3 | RNVC: 2
5719600004: RNCC: 5 | RNVC: 2

10 Jul 1990

5120-12-126-3178
Blacksmith's Flatter

121263178
NO PRIMARY REF 12-126-3178: RNCC: 3 | RNVC: 2
DIN5106-50: RNCC: 5 | RNVC: 9
50DIN5106: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-337-4858
Flat Tip Screwdriver

123374858
20065410: RNCC: 3 | RNVC: 2
1712300113: RNCC: 5 | RNVC: 2
1712300113: RNCC: 5 | RNVC: 9

9 Mar 1995

5120-12-362-8851
Hand Terminal Crimping Tool

123628851
558130: RNCC: 3 | RNVC: 2

8 Apr 2004

5120-12-304-0348
Bearing And Bushing Inserter

123040348
105-31803W1: RNCC: 3 | RNVC: 2

31 May 1985

5120-12-351-9616
Hand Hammer

123519616
5036040050: RNCC: 3 | RNVC: 2
5036.04.0050: RNCC: 5 | RNVC: 2

20 Sep 2000

5120-12-163-3272
Buchse Auszieher

121633272
92010395: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-378-8863
Mechanical Puller

123788863
F6557114: RNCC: 3 | RNVC: 2

26 May 2009

5120-12-376-4154
Jack Stand

123764154
90000064: RNCC: 3 | RNVC: 2
0723.0000.00: RNCC: 5 | RNVC: 2

25 Sep 2008

5120-12-123-5099
Open End Wrench

121235099
NO PRIMARY REF 12-123-5099: RNCC: 3 | RNVC: 2
330A9-32X5-16: RNCC: 5 | RNVC: 9
00860: RNCC: 5 | RNVC: 9
105057: RNCC: 5 | RNVC: 9
1932WZ9-32X5-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-353-1166
Torque Wrench Adapter Set

123531166
J0433782D311-000A0: RNCC: 3 | RNVC: 2

30 Jan 2001

5120-12-174-0249
Open End Box Wrench

121740249
183012225: RNCC: 3 | RNVC: 2

31 May 1978

5120-12-305-2546
Rohrbieger Dorn

123052546
5-5/80-035-000-21446: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-390-1512
Quick Adjusting Screw Clamp

123901512
SQ-8-SP-BG: RNCC: 3 | RNVC: 2

10 Oct 2012

5120-12-157-0634
Spanner Wrench

121570634
109126003: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-332-6950
Schluessel

123326950
9689160149: RNCC: 3 | RNVC: 2
91642876: RNCC: 5 | RNVC: 2

7 Sep 1993

5120-12-334-3803
Open End Wrench

123343803
53.1613.203.12: RNCC: 3 | RNVC: 2

3 May 1994

5120-12-363-8711
Bearing And Bushing Inserter

123638711
T670P5001204: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-010-5220

5120-12-313-4268
Montierwerk Huelse

123134268
80996030155: RNCC: 3 | RNVC: 2
80.99603.0155: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-369-2737
Socket Wrench Set

123692737
1425-MU: RNCC: 3 | RNVC: 2
00.45.49.87: RNCC: 5 | RNVC: 2

13 Jun 2006

5120-12-193-0258
Socket Head Screw Key Blade

121930258
NM 304-51: RNCC: 3 | RNVC: 2
NM304-51: RNCC: 5 | RNVC: 2
NM 304-51: RNCC: 5 | RNVC: 9
NM304-51: RNCC: 5 | RNVC: 9

15 Jun 1982

5120-12-142-0257
Screw Extractor

121420257
1328GR9: RNCC: 3 | RNVC: 2
572J101BGR9: RNCC: 5 | RNVC: 2
1328GR9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-8749
Mechanical Puller

123888749
611589023300: RNCC: 3 | RNVC: 2

2 May 2012

5120-12-390-2135
Mechanical Puller Attachment

123902135
F6558508: RNCC: 3 | RNVC: 2

17 Oct 2012

5120-12-198-7525
Lager- Und Einsatz

121987525
5870058050: RNCC: 3 | RNVC: 2
026057: RNCC: 5 | RNVC: 2
5870058050: RNCC: 5 | RNVC: 9

23 Feb 1984

5120-12-139-2508
Ein- Und Auspreszvo

121392508
016M07400: RNCC: 3 | RNVC: 2
VM72750: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-337-1802
Mechanical Puller Attachment

123371802
8511408.005: RNCC: 3 | RNVC: 2
0851 1408.005: RNCC: 5 | RNVC: 2

30 Jan 1995

5120-12-391-2248
Fuel Injection Nozzle Extractor

123912248
11.49021-1114: RNCC: 3 | RNVC: 2
11.49021-1114: RNCC: 5 | RNVC: 2
221.223: RNCC: 5 | RNVC: 2
DRW11490211114: RNCC: 5 | RNVC: 2
221.223: RNCC: 5 | RNVC: 2
DRW11490211114: RNCC: 5 | RNVC: 2

26 Feb 2013

5120-12-374-6814
Rotat Holding Tool

123746814
F6271449: RNCC: 3 | RNVC: 2

6 Mar 2008

5120-12-021-6807

5120-12-150-3958
Dorn

121503958
1X46106166: RNCC: 3 | RNVC: 2
V106166: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-196-3671
Socket Head Screw Key

121963671
50041089: RNCC: 3 | RNVC: 2
50041089: RNCC: 5 | RNVC: 9

30 Jun 1983

5120-12-196-7529
Montierhuelse

121967529
KDEP2962: RNCC: 3 | RNVC: 2
0535343: RNCC: 5 | RNVC: 2
KDEP2962: RNCC: 5 | RNVC: 2
535343: RNCC: 5 | RNVC: 9

10 Aug 1983

5120-12-178-3271
Body And Fender Spoon

121783271
265: RNCC: 3 | RNVC: 2
1931: RNCC: 3 | RNVC: 2
10900: RNCC: 3 | RNVC: 2
323-14: RNCC: 3 | RNVC: 2
1651: RNCC: 3 | RNVC: 2
5141980022: RNCC: 5 | RNVC: 2
323025: RNCC: 5 | RNVC: 2
107637: RNCC: 5 | RNVC: 9
174971: RNCC: 5 | RNVC: 9
3770: RNCC: 5 | RNVC: 9

12 Apr 1979

5120-12-389-0349
Spanner Wrench

123890349
35-500-105: RNCC: 3 | RNVC: 2
90500274: RNCC: 5 | RNVC: 2

21 May 2012

5120-12-123-5850
Socket Wrench Socket

121235850
NO PRIMARY REF 12-123-5850: RNCC: 3 | RNVC: 2
06010024: RNCC: 5 | RNVC: 9
60-24: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5976
Socket Wrench Socket

121235976
NO PRIMARY REF 12-123-5976: RNCC: 3 | RNVC: 2
7810SZ11-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-180-0278
Abziehvorrichtung

121800278
01TC30099-01: RNCC: 3 | RNVC: 2
MAGERD 4141: RNCC: 5 | RNVC: 9

17 Aug 1979

5120-12-153-5057
Feststellvorrichtun

121535057
510195-230-00: RNCC: 2 | RNVC: 2
169106409: RNCC: 3 | RNVC: 2
E169106409: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-8822
Screwdriver Bit

123408822
7030-1,2X8: RNCC: 3 | RNVC: 2
70300003: RNCC: 5 | RNVC: 2

27 Jun 1996

5120-12-156-1539
Box Wrench

121561539
NM285-04: RNCC: 3 | RNVC: 2
NM285-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-130-7961
Abziehvorrichtung

121307961
NO PRIMARY REF 12-130-7961: RNCC: 3 | RNVC: 2
2334: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-374-4153
Ten Mounting Tools

123744153
80996060705: RNCC: 3 | RNVC: 2
80.99606.0705: RNCC: 5 | RNVC: 2

14 Feb 2008

5120-12-145-9638
Spanner Wrench

121459638
510169: RNCC: 2 | RNVC: 2
510169: RNCC: 5 | RNVC: 2
510169: RNCC: 5 | RNVC: 9
510169: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-370-9267
Socket Wrench Socket

123709267
80996060610: RNCC: 3 | RNVC: 2
80.99606-0610: RNCC: 5 | RNVC: 2

17 Jan 2007

5120-12-315-2437
Box Wrench

123152437
550589010300: RNCC: 3 | RNVC: 2
5505890103/00: RNCC: 5 | RNVC: 2
5505890103/00: RNCC: 5 | RNVC: 2

6 Oct 1988

5120-12-311-2409
Box Wrench Set

123112409
110-62M: RNCC: 3 | RNVC: 2

7 Aug 1987

5120-12-340-2653
Gew Spann- Huelse

123402653
01500678632: RNCC: 3 | RNVC: 2

20 Mar 1996

5120-12-342-9816
Socket Wrench Screwdriver Attachment

123429816
54.0024.810.00: RNCC: 3 | RNVC: 2

21 Apr 1997

5120-12-388-9351
Bearing And Bushing Inserter

123889351
80996140028: RNCC: 3 | RNVC: 2
80.99614-0028: RNCC: 5 | RNVC: 2

8 May 2012

5120-12-351-2759
Auswechselwerkzeug

123512759
3099-00-190000: RNCC: 3 | RNVC: 2
3099-190000: RNCC: 5 | RNVC: 2

10 Jul 2000

5120-12-325-8120
Seal Inserter

123258120
5870048031: RNCC: 3 | RNVC: 2
790510577: RNCC: 5 | RNVC: 2
5870 048 031: RNCC: 5 | RNVC: 9
5870048031: RNCC: 5 | RNVC: 9

12 Jul 1991

5120-12-368-1011
Pliers

123681011
65307200-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-371-4324
Eindrueckwerkzeug

123714324
80996040204: RNCC: 3 | RNVC: 2
80.99604-0204: RNCC: 5 | RNVC: 2

28 Mar 2007

5120-12-144-6303
Mechanical Puller

121446303
25704-360395.00.0: RNCC: 2 | RNVC: 2
25704-360395.00.0: RNCC: 3 | RNVC: 2
25704-360395.00.0: RNCC: 5 | RNVC: 2
25704-360395-00-0: RNCC: 5 | RNVC: 2
25704-360390-00-0: RNCC: 5 | RNVC: 9
25704-360390.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-333-7966
Open End Wrench

123337966
DIN895-11X14: RNCC: 4 | RNVC: 1

8 Feb 1994

5120-12-334-8446
Gl Montierwerkzeug

123348446
7 233 13 07 00: RNCC: 3 | RNVC: 2
7-233-1307-00: RNCC: 5 | RNVC: 2

27 Jun 1994

5120-12-303-3446
Drain Plug Wrench

123033446
P-875221-401: RNCC: 3 | RNVC: 2
P-875221: RNCC: 5 | RNVC: 2
P875221-401: RNCC: 5 | RNVC: 2

15 Mar 1985

5120-12-142-1020
Mechanical Puller

121421020
784-15: RNCC: 3 | RNVC: 2
201-1: RNCC: 3 | RNVC: 2
724-150: RNCC: 3 | RNVC: 2
131: RNCC: 3 | RNVC: 2
7240001: RNCC: 5 | RNVC: 2
713A031-150: RNCC: 5 | RNVC: 2
4938520013: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-306-5330
Boerdelwer Einsatz

123065330
105-45361W3: RNCC: 3 | RNVC: 2

6 Mar 1986

5120-12-336-9855
Electrical Contact Inserter And Remover

123369855
VG95236T04C003: RNCC: 2 | RNVC: 2

5 Jan 1995

5120-12-172-2793
Spanner Wrench

121722793
1240W6BL1: RNCC: 3 | RNVC: 2
335929-9017.000: RNCC: 3 | RNVC: 2
1240W6BL1: RNCC: 5 | RNVC: 2
1240W6BL1: RNCC: 5 | RNVC: 9
335929-9017.000: RNCC: 5 | RNVC: 9

10 Jan 1978

5120-12-364-0741
Aufdrueckwerkzeug

123640741
0986618101: RNCC: 3 | RNVC: 2
KDLJJ 6004: RNCC: 5 | RNVC: 2

18 Aug 2004

5120-12-131-7420
Sperringzieher

121317420
045212: RNCC: 3 | RNVC: 2
278A: RNCC: 5 | RNVC: 2
45211: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-382-2254
Spanner Wrench

123822254
82048: RNCC: 3 | RNVC: 2

25 May 2010

5120-12-362-4013
Socket Head Screw Key

123624013
T4881XESD09: RNCC: 3 | RNVC: 2

17 Feb 2004

5120-12-191-5580
Torque Wrench

121915580
9291386245: RNCC: 3 | RNVC: 2
ASC1588576: RNCC: 5 | RNVC: 9

10 Feb 1982

5120-12-164-6798
Einbauvorrichtung

121646798
400-990: RNCC: 3 | RNVC: 2
400-990: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-313-8823
Open End Wrench

123138823
4200202: RNCC: 3 | RNVC: 2

17 May 1988

5120-12-394-6138
Open End Wrench

123946138
13606: RNCC: 3 | RNVC: 2

18 Dec 2013

5120-12-382-1879
Slugging Type Box Wrench Socket

123821879
61-50: RNCC: 3 | RNVC: 2
06030050: RNCC: 5 | RNVC: 2

19 May 2010

5120-12-174-3549
Mechanical Puller Attachment

121743549
7882394: RNCC: 3 | RNVC: 2
1000025-850000-01: RNCC: 5 | RNVC: 2
1000025-850000.01: RNCC: 5 | RNVC: 2
7882-394: RNCC: 5 | RNVC: 2

26 Jun 1978

5120-12-127-5309
Hand Terminal Crimping Tool

121275309
NO PRIMARY REF 12-127-5309: RNCC: 3 | RNVC: 2
49935: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-7343
Zwischenring

121767343
VG95211-ML-121767343: RNCC: 2 | RNVC: 2
105-42322W1.04: RNCC: 3 | RNVC: 2
105-42322W1-04: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-312-5114
Rohrbieger Dorn

123125114
9230-110W3: RNCC: 3 | RNVC: 2

13 Jan 1988

5120-12-164-7521
Socket Wrench Crowfoot Attachment

121647521
NO PRIMARY REF 12-164-7521: RNCC: 3 | RNVC: 2
131501: RNCC: 5 | RNVC: 9
1950M42: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-140-2584
Hole Sheet Metal Holder

121402584
2071S40: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-187-7740
Sealant Dispenser

121877740
121.39V: RNCC: 3 | RNVC: 2
160.320: RNCC: 5 | RNVC: 9
160320: RNCC: 5 | RNVC: 9

6 May 1981

5120-12-022-8144

5120-12-094-0376

5120-12-314-6930
Socket Head Screw Key

123146930
334-53: RNCC: 3 | RNVC: 2

29 Jul 1988

5120-12-161-0093
Bearing And Bushing Inserter

121610093
510306-0000.07: RNCC: 2 | RNVC: 2
07291: RNCC: 3 | RNVC: 2
510306-0000-07: RNCC: 5 | RNVC: 9
07291: RNCC: 5 | RNVC: 9
510306-0000-07: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-359-6711
Bearing And Bushing Inserter And Remover

123596711
T623P3003110: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-347-2683
Abstimmwerkzeugsatz

123472683
662-709: RNCC: 3 | RNVC: 2

18 Nov 1998

5120-12-314-9580
Schluessel

123149580
P-0-718: RNCC: 3 | RNVC: 2
P-0-718: RNCC: 5 | RNVC: 9

1 Sep 1988

5120-12-337-9128
Piston Inserter

123379128
126 589 03 14 00: RNCC: 3 | RNVC: 2

3 May 1995

5120-12-365-9158
Swivel Knob Jeweler's Screwdriver

123659158
T4877X 05: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-346-9203
Combination Box And Open End Wrench

123469203
1B50: RNCC: 3 | RNVC: 2

28 Sep 1998

5120-12-361-4632
Aligning Punch

123614632
5500380774: RNCC: 3 | RNVC: 2

6 Oct 2003

5120-12-332-6139
Spanner Wrench

123326139
532117-8079.902: RNCC: 3 | RNVC: 2
532117-8079.902: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-368-8211
Socket Head Screw Key

123688211
43150006-TCS: RNCC: 3 | RNVC: 2

25 Apr 2006

5120-12-312-1393
Mechan Adaptersatz

123121393
80996060242: RNCC: 3 | RNVC: 2
80.99606.0242: RNCC: 5 | RNVC: 2

26 Nov 1987

5120-12-366-8557
Cross Tip Screwdriver

123668557
4722ESD PH0: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-12-302-8893

5120-12-358-2506
Screwdriver Bit

123582506
614784065: RNCC: 3 | RNVC: 2
614 784 065: RNCC: 5 | RNVC: 2

1 Oct 2002

5120-12-363-9038
Bearing And Bushing Inserter And Remover

123639038
T670P5001250: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-192-7714
Socket Wrench Socket

121927714
4556: RNCC: 3 | RNVC: 2
5719650009: RNCC: 5 | RNVC: 2
617589010900: RNCC: 5 | RNVC: 2
2776: RNCC: 5 | RNVC: 9

24 May 1982

5120-12-332-5904
Montierwerk Huelse

123325904
0851 8908.002: RNCC: 3 | RNVC: 2

25 Aug 1993

5120-12-145-4112
Torque Wrench Adapter

121454112
2360-264110.01.0: RNCC: 2 | RNVC: 2
2360-264110.01.0: RNCC: 3 | RNVC: 2
2360-264110.01.0: RNCC: 5 | RNVC: 2
2360-264110-01-0: RNCC: 5 | RNVC: 2
2360-264110-01-0: RNCC: 5 | RNVC: 2
2360-264110-01-0: RNCC: 5 | RNVC: 9
2360-264110.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-333-5486
Op Montierwerkzeug

123335486
61-90-010: RNCC: 3 | RNVC: 2

5 Jan 1994

5120-12-307-3762
Grommet Inserting Punch And Die

123073762
15A-40X20: RNCC: 3 | RNVC: 2
3492: RNCC: 5 | RNVC: 9

10 Jun 1986

5120-12-362-1141
Crimpzange Kopf

123621141
118068101: RNCC: 3 | RNVC: 2
CSV10-0087: RNCC: 5 | RNVC: 2
80996250087: RNCC: 5 | RNVC: 2
80996250037: RNCC: 5 | RNVC: 9

12 Jan 2004

5120-12-156-1603
Box Wrench

121561603
NM286-10: RNCC: 3 | RNVC: 2
NM286-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-325-9998
Bearing And Bushing Remover

123259998
603589001500: RNCC: 3 | RNVC: 2

29 Jul 1991

5120-12-305-1231
Box Wrench

123051231
329458: RNCC: 3 | RNVC: 2

27 Sep 1985

5120-12-344-5999
Detent Handling Tool

123445999
1X56136467: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-336-2750
Ratchet Wrench

123362750
3180: RNCC: 3 | RNVC: 2

7 Nov 1994

5120-12-335-4914
Hand Hammer

123354914
3028030: RNCC: 3 | RNVC: 2
51229030: RNCC: 3 | RNVC: 2

23 Aug 1994

5120-12-326-5297
Bearing And Bushing Inserter

123265297
4901147: RNCC: 3 | RNVC: 2

1 Oct 1991

5120-12-186-7352
Seal Inserter

121867352
99374389: RNCC: 3 | RNVC: 2
445050: RNCC: 5 | RNVC: 9
445050: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-199-0772
Hand Terminal Crimping Tool

121990772
SL40: RNCC: 3 | RNVC: 2
SL40: RNCC: 5 | RNVC: 9

23 Mar 1984

5120-12-340-2114
Montierdorn

123402114
0852 3069: RNCC: 3 | RNVC: 2

14 Mar 1996

5120-12-362-4718
Combination Box And Open End Wrench

123624718
54.0084.960.49: RNCC: 3 | RNVC: 2
13-15: RNCC: 5 | RNVC: 2

27 Feb 2004

5120-12-196-1613
Seal Inserter

121961613
5100018-000000.03: RNCC: 2 | RNVC: 2
127112U: RNCC: 3 | RNVC: 2

7 Jun 1983

5120-12-700-1005
Spanner Wrench

127001005
50-020021500: RNCC: 3 | RNVC: 2
1000230-1742: RNCC: 5 | RNVC: 2

18 Jul 1991

5120-12-387-9621
Socket Wrench Socket

123879621
WWSW17IMP-T5025: RNCC: 3 | RNVC: 2
80.99603-0290: RNCC: 5 | RNVC: 2
80996030290: RNCC: 5 | RNVC: 2

13 Feb 2012

5120-12-144-0636
Spanner Wrench

121440636
2895-028: RNCC: 3 | RNVC: 2
2895028: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-373-4050
Flat Tip Screwdriver

123734050
379-8: RNCC: 3 | RNVC: 2

30 Oct 2007

5120-12-140-2586
Hole Sheet Metal Holder

121402586
2071S64: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-091-2907

5120-12-339-3243
Screwdriver Bit

123393243
845-PH1-PH2-5: RNCC: 3 | RNVC: 2

9 Nov 1995

5120-12-123-5521
Socket Wrench

121235521
DIN659-7: RNCC: 2 | RNVC: 2
7DIN659: RNCC: 5 | RNVC: 2
860N4007: RNCC: 5 | RNVC: 9
5168K7: RNCC: 5 | RNVC: 9
7DIN659GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-367-1701
Spanner Wrench

123671701
2809990037: RNCC: 3 | RNVC: 2

14 Jul 2005

5120-12-181-1432
Mechanical Puller

121811432
314589003300: RNCC: 3 | RNVC: 9

29 Oct 1979

5120-12-322-3504
Socket Wrench

123223504
1945NB-M8: RNCC: 3 | RNVC: 2
105335: RNCC: 5 | RNVC: 2

14 Aug 1990

5120-12-165-6578
Hand Hammer

121656578
NA801-36-5: RNCC: 3 | RNVC: 2

11 Jun 1976

5120-12-155-9499
Pasz- U Schluessel

121559499
NO PRIMARY REF 12-155-9499: RNCC: 3 | RNVC: 2
NM213-01: RNCC: 5 | RNVC: 9
NM213-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-308-5532
Bearing And Bushing Inserter

123085532
99374290: RNCC: 3 | RNVC: 2
417000: RNCC: 5 | RNVC: 9
417000: RNCC: 5 | RNVC: 9

22 Oct 1986

5120-12-321-1089
Werkst Druckstueck

123211089
HWN2259.012: RNCC: 3 | RNVC: 2

28 Mar 1990

5120-12-387-1913
Spanner Wrench

123871913
434.041: RNCC: 3 | RNVC: 2

14 Nov 2011

5120-12-135-2978
Mechanical Puller

121352978
31: RNCC: 3 | RNVC: 2
180: RNCC: 3 | RNVC: 2
VW235: RNCC: 5 | RNVC: 2
713A096: RNCC: 5 | RNVC: 9
52490: RNCC: 5 | RNVC: 9
789: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-356-4032
Hole Sheet Metal Holder

123564032
2072KU-35X15: RNCC: 3 | RNVC: 2

25 Feb 2002

5120-12-384-1700
Blind Riveter Nosepiece

123841700
7252172: RNCC: 3 | RNVC: 2

28 Jan 2011

5120-12-336-0145
Lamp Extractor

123360145
61.1009012: RNCC: 3 | RNVC: 2

12 Oct 1994

5120-12-374-0867
Montierdorn

123740867
T15302: RNCC: 3 | RNVC: 2

16 Jan 2008

5120-12-309-1604
Socket Head Screw Key

123091604
NM290-106: RNCC: 3 | RNVC: 2
NM290-106: RNCC: 5 | RNVC: 9

19 Dec 1986

5120-12-149-6871
Mechanical Puller Attachment

121496871
0681240039: RNCC: 3 | RNVC: 2
EFEP263: RNCC: 5 | RNVC: 2
KDEP2865: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-172-6488
Spanner Wrench

121726488
1X56130584: RNCC: 3 | RNVC: 2
V130584: RNCC: 5 | RNVC: 2
0535939: RNCC: 5 | RNVC: 2

3 Feb 1978

5120-12-384-3095
Torque Wrench

123843095
0015384230: RNCC: 3 | RNVC: 2

11 Feb 2011

5120-12-379-4612
Screw Thread Insert Inserter

123794612
620 000 120: RNCC: 3 | RNVC: 2
620 000 120: RNCC: 5 | RNVC: 9

27 Jul 2009

5120-12-306-0075
Socket Wrench Set

123060075
NO PRIMARY REF 12-306-0075: RNCC: 3 | RNVC: 2
430-12: RNCC: 5 | RNVC: 9

20 Jan 1986

5120-12-196-3868
Socket Head Screw Key

121963868
1997LMZ-1,3-.050: RNCC: 3 | RNVC: 2
1302474: RNCC: 5 | RNVC: 2
1997L-MZ1,3/.050: RNCC: 5 | RNVC: 2
130247: RNCC: 5 | RNVC: 9
1997LMZ1-3-050: RNCC: 5 | RNVC: 9

4 Jul 1983

5120-12-126-3294
Hand Hammer Head

121263294
NO PRIMARY REF 12-126-3294: RNCC: 3 | RNVC: 2
0B40DIN5105: RNCC: 5 | RNVC: 9
DIN5105-OB40: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-300-5126
Aligning Punch

123005126
1013-100W72: RNCC: 3 | RNVC: 2
1013-100-W72: RNCC: 5 | RNVC: 2

8 Aug 1984

5120-12-130-7971
Box Wrench

121307971
NO PRIMARY REF 12-130-7971: RNCC: 3 | RNVC: 2
1976: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-9515
Spanner Wrench

121949515
1X56104897: RNCC: 3 | RNVC: 2

21 Dec 1982

5120-12-390-3998
Ei Fuehrungsplatte

123903998
F6785475: RNCC: 3 | RNVC: 2

8 Nov 2012

5120-12-358-2648
Screwdriver Bit

123582648
614784085: RNCC: 3 | RNVC: 2
614 784 085: RNCC: 5 | RNVC: 2

2 Oct 2002

5120-12-303-5235
Plug Electrical Connector Extractor

123035235
215384: RNCC: 3 | RNVC: 2

29 Mar 1985

5120-12-172-8189
Dorn

121728189
VG95211-ML-121728189: RNCC: 2 | RNVC: 2
1X56 136 373: RNCC: 3 | RNVC: 2
1X56136373: RNCC: 5 | RNVC: 9

22 Feb 1978

5120-12-187-7148
Mechanical Puller Attachment

121877148
21-02: RNCC: 3 | RNVC: 2

29 Apr 1981

5120-12-169-2282
Spanner Wrench

121692282
1000025-810100: RNCC: 3 | RNVC: 2
1000025-810100: RNCC: 5 | RNVC: 2

27 Apr 1977

5120-12-190-7438
Screw Thread Insert Inserter

121907438
23530112000: RNCC: 3 | RNVC: 2
10530112000: RNCC: 5 | RNVC: 2
S12K: RNCC: 5 | RNVC: 9
1053 0112 000: RNCC: 5 | RNVC: 9

10 Dec 1981

5120-12-126-1843

5120-12-388-0588
Crimping Tool Die

123880588
1181-96104: RNCC: 3 | RNVC: 2
80.99625-0123: RNCC: 5 | RNVC: 2
80996250123: RNCC: 5 | RNVC: 2

22 Feb 2012

5120-12-383-6976
Ku Montierwerkzeug

123836976
1X56.104.923: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-12-392-6906
Driftpin

123926906
CTP40508G001: RNCC: 3 | RNVC: 2

28 Jun 2013

5120-12-384-8307
Drift Punch

123848307
46.000.045: RNCC: 3 | RNVC: 2

1 Apr 2011

5120-12-158-3514
Ausbauvorrichtung

121583514
264-280: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-365-0105
Cross Tip Screwdriver

123650105
4-622: RNCC: 3 | RNVC: 2

23 Nov 2004

5120-12-319-8469
Socket Head Screw Key Set

123198469
62645-7: RNCC: 3 | RNVC: 2
250A-06-0600: RNCC: 5 | RNVC: 2
250A-06-0600: RNCC: 5 | RNVC: 9

9 Nov 1989

5120-12-344-0140
Detent Handling Tool

123440140
SK1678-00.00: RNCC: 3 | RNVC: 2

28 Aug 1997

5120-12-139-2477
Spanner Wrench

121392477
023M09400: RNCC: 3 | RNVC: 2
VM71384: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-351-9117
Jewelers' Pliers

123519117
3612130: RNCC: 3 | RNVC: 2

14 Sep 2000

5120-12-341-1594
Screwdriver Bit

123411594
3243-TX27: RNCC: 3 | RNVC: 2
ITX20-T27: RNCC: 3 | RNVC: 2
00.45.22.60: RNCC: 5 | RNVC: 2

2 Aug 1996

5120-12-312-0294
Pedal Adjustment Tool Compressor

123120294
381589003100: RNCC: 3 | RNVC: 2

11 Nov 1987

5120-12-126-2582
Blacksmiths' Tongs

121262582
0004910-500: RNCC: 3 | RNVC: 2
57110050: RNCC: 3 | RNVC: 2
4140-500: RNCC: 5 | RNVC: 2
49A-500: RNCC: 5 | RNVC: 2
DIN5171-F16: RNCC: 5 | RNVC: 9
F16DIN5171: RNCC: 5 | RNVC: 9
57110-500: RNCC: 5 | RNVC: 9
2839-500: RNCC: 5 | RNVC: 9
623B106-500: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-309-8500
Rohrbieger Rolle

123098500
840527-00.10: RNCC: 3 | RNVC: 2

11 Mar 1987

5120-12-188-7006
Einstell Schluessel

121887006
3170-13-006: RNCC: 3 | RNVC: 2

27 Jul 1981

5120-12-123-5172
Open End Wrench

121235172
TL5120-0101-200: RNCC: 2 | RNVC: 2
12A-15/64: RNCC: 3 | RNVC: 2
40461515: RNCC: 5 | RNVC: 2
104970: RNCC: 5 | RNVC: 9
1931Z15-64: RNCC: 5 | RNVC: 9
TK5120-354-200: RNCC: 5 | RNVC: 9
1931Z15/64: RNCC: 5 | RNVC: 9
TK-KG55-5120-354-200: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-357-2285
Duese Reiniger

123572285
0986611141: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-347-2668
Piston Ring Expander

123472668
N4452: RNCC: 3 | RNVC: 2

18 Nov 1998

5120-12-129-4532

5120-12-023-1443

5120-12-091-4773

5120-12-172-1854
Spanner Wrench

121721854
903-812-0079: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-368-1979
Socket Wrench Socket

123681979
01530032-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-311-8025
Spanner Wrench

123118025
272.312 947: RNCC: 3 | RNVC: 2

19 Oct 1987

5120-12-379-0130
Torque Wrench

123790130
51060030-TCS: RNCC: 3 | RNVC: 2

15 Jun 2009

5120-12-361-3645
Spanner Wrench

123613645
G21484: RNCC: 3 | RNVC: 2

18 Sep 2003

5120-12-330-5535
Stud Inserter

123305535
0851 0478: RNCC: 3 | RNVC: 2
8510478: RNCC: 5 | RNVC: 2

8 Jan 1993

5120-12-336-7707
Screwdriver Bit Set

123367707
647L+620+600+602: RNCC: 3 | RNVC: 2

21 Dec 1994

5120-12-171-3445
Rack Bar Jack

121713445
DIN7355-AR5: RNCC: 2 | RNVC: 2
301: RNCC: 5 | RNVC: 9
AR5DIN7355: RNCC: 5 | RNVC: 9

30 Sep 1977

5120-12-195-1270
Drahtgabel Halter

121951270
5803463-4173: RNCC: 2 | RNVC: 2
5803463-4173: RNCC: 3 | RNVC: 2
5801536-1173: RNCC: 5 | RNVC: 9

17 Jan 1983

5120-12-129-8770
Mechanical Puller

121298770
0681369015: RNCC: 3 | RNVC: 2
EF3646: RNCC: 5 | RNVC: 9
KDAW9996: RNCC: 5 | RNVC: 9
0681369015: RNCC: 5 | RNVC: 9
EF3646: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-314-2154
Mechanical Puller

123142154
0852 7246: RNCC: 3 | RNVC: 2
8527246: RNCC: 5 | RNVC: 2

17 Jun 1988

5120-12-139-8567

5120-12-181-9720
Montierwerk Huelse

121819720
VW455: RNCC: 3 | RNVC: 9

28 Dec 1979

5120-12-362-8628
Socket Wrench

123628628
61328610: RNCC: 3 | RNVC: 2

7 Apr 2004

5120-12-347-2670
Piston Ring Compressor

123472670
57495-645: RNCC: 3 | RNVC: 2

18 Nov 1998

5120-12-392-6965
Face Spanner Wrench Socket

123926965
49904446: RNCC: 3 | RNVC: 2

28 Jun 2013

5120-12-176-9710
Schluessel

121769710
3032-0025-581976: RNCC: 3 | RNVC: 2

3 Jan 1979

5120-12-385-0610
Socket Wrench Adapter

123850610
CH1772/45: RNCC: 3 | RNVC: 2
0005892716/00: RNCC: 5 | RNVC: 2
000 589 27 16/00: RNCC: 5 | RNVC: 2

27 Apr 2011

5120-12-022-6094

5120-12-091-4758

5120-12-176-1328
Socket Head Screw Key

121761328
4207106: RNCC: 3 | RNVC: 2
C1997M5: RNCC: 3 | RNVC: 2
148504: RNCC: 5 | RNVC: 2
907805: RNCC: 5 | RNVC: 9
C1997M5MM: RNCC: 6 | RNVC: 9

9 Nov 1978

5120-12-190-7436
Screw Thread Insert Inserter

121907436
23530108000: RNCC: 3 | RNVC: 2
10530108000: RNCC: 5 | RNVC: 2
1053 0108 000: RNCC: 5 | RNVC: 9
S8K: RNCC: 5 | RNVC: 9

10 Dec 1981

5120-12-179-7297
Flat Tip Screwdriver

121797297
6001.20: RNCC: 3 | RNVC: 2
200-13-0X250: RNCC: 5 | RNVC: 9
A2X13DIN5265: RNCC: 5 | RNVC: 9
DIN5265-A2X13: RNCC: 5 | RNVC: 9

23 Jul 1979

5120-12-388-9797
Seal Inserter

123889797
80996040320: RNCC: 3 | RNVC: 2
80.99604-0320: RNCC: 5 | RNVC: 2

11 May 2012

5120-12-363-2361
Bearing And Bushing Inserter

123632361
F30377257: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-130-6314
Open End Wrench

121306314
LG40989: RNCC: 3 | RNVC: 2
WZ26: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-158-9756
Electronic Equipment Alignment Tool

121589756
770F: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-316-8884
Rohrbieg Glaetteil

123168884
7-3/40-000-175-31422: RNCC: 3 | RNVC: 2

22 Feb 1989

5120-12-336-9792
Screwdriver Bit

123369792
05072720001: RNCC: 3 | RNVC: 2
52951-090: RNCC: 3 | RNVC: 2
072720: RNCC: 3 | RNVC: 9
2110S-2,0X12: RNCC: 5 | RNVC: 2
72720: RNCC: 5 | RNVC: 9

4 Jan 1995

5120-12-123-5297
Box Wrench

121235297
2-7-8X15-16: RNCC: 3 | RNVC: 2
2Z-7/8X15/16: RNCC: 3 | RNVC: 2
235814: RNCC: 5 | RNVC: 2
100180: RNCC: 5 | RNVC: 2
2-424: RNCC: 5 | RNVC: 9
2AFC-235814: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-392-7482
Box Wrench

123927482
SEWZG015: RNCC: 3 | RNVC: 2

4 Jul 2013

5120-12-126-5549
Pliers

121265549
DIN5236S-GERAUHTA160: RNCC: 2 | RNVC: 9
A160SDIN5236GERAUHT: RNCC: 5 | RNVC: 2
222: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-321-2993
Inspection Mirror

123212993
1900TRH: RNCC: 3 | RNVC: 2

30 Apr 1990

5120-12-365-9151
Swivel Knob Jeweler's Screwdriver

123659151
T4880X 18: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-383-6657
Quick Adjusting Screw Clamp

123836657
TB210: RNCC: 3 | RNVC: 2

23 Nov 2010

5120-12-336-5102
Bearing And Bushing Inserter

123365102
0852 3064: RNCC: 3 | RNVC: 2
8523064: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-196-5351
Electrical Contact Remover

121965351
36561-001: RNCC: 3 | RNVC: 2
5300780006000: RNCC: 3 | RNVC: 2
36561-001: RNCC: 5 | RNVC: 9
22-36561-001: RNCC: 5 | RNVC: 9
36561-001: RNCC: 5 | RNVC: 9
22D-36561-001: RNCC: 5 | RNVC: 9

18 Jul 1983

5120-12-135-5022
Box Wrench

121355022
NO PRIMARY REF 12-135-5022: RNCC: 3 | RNVC: 2
4AA2225: RNCC: 5 | RNVC: 9
4AA2225: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-302-8580
Socket Wrench Handle Bar

123028580
4900059-721360.003.0: RNCC: 2 | RNVC: 2
4900059-721360.003.0: RNCC: 3 | RNVC: 2
64009: RNCC: 5 | RNVC: 2

4 Feb 1985

5120-12-193-5965
Face Spanner Wrench Socket

121935965
55504S0000: RNCC: 3 | RNVC: 2
MAGERD 3539: RNCC: 5 | RNVC: 2
55504S0000-403: RNCC: 5 | RNVC: 2
55504S0000-405: RNCC: 5 | RNVC: 2
55504S0000-407: RNCC: 5 | RNVC: 2

9 Aug 1982

5120-12-328-5127
Spanner Wrench

123285127
870/000-218: RNCC: 3 | RNVC: 2

26 May 1992

Load More Results