What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 31 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 31 of 62

5120-12-093-7590

5120-12-147-6734
Socket Wrench

121476734
895-4: RNCC: 3 | RNVC: 2
200-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-377-3357
Fuel Injection Nozzle Extractor

123773357
F30377999: RNCC: 3 | RNVC: 2

9 Jan 2009

5120-12-361-2347
Seal Inserter

123612347
714589051500: RNCC: 3 | RNVC: 2

8 Sep 2003

5120-12-316-1457
Seal Inserter

123161457
1X56136367: RNCC: 3 | RNVC: 2

24 Dec 1988

5120-12-129-8778
Mechanical Puller

121298778
0681300001: RNCC: 3 | RNVC: 2
EFAL1: RNCC: 5 | RNVC: 2
KDAL54930ZANGEN: RNCC: 5 | RNVC: 9
0681300001: RNCC: 5 | RNVC: 9
EFAL1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-5956
Socket Wrench Crowfoot Attachment

123645956
01190010-TCS: RNCC: 3 | RNVC: 2

13 Oct 2004

5120-12-140-2220

5120-12-700-6201
Pinch Bar

127006201
4209392: RNCC: 3 | RNVC: 2
BRECHSTANGE 1200X28: RNCC: 5 | RNVC: 9

29 Sep 1992

5120-12-181-1428
Spanner Wrench

121811428
319589010700: RNCC: 3 | RNVC: 9

29 Oct 1979

5120-12-368-6731
Socket Wrench Screwdriver Attachment

123686731
3520-PH2: RNCC: 3 | RNVC: 2
00.47.43.87: RNCC: 5 | RNVC: 2

5 Apr 2006

5120-12-382-0009
Adjustable Wrench

123820009
0551900S: RNCC: 3 | RNVC: 2

27 Apr 2010

5120-12-191-3984
Montagevorrichtung

121913984
1878156234: RNCC: 3 | RNVC: 2
18781 56234: RNCC: 5 | RNVC: 9

1 Feb 1982

5120-12-361-1203
Wrench Extension Handle

123611203
CBD32569P01: RNCC: 3 | RNVC: 2

26 Aug 2003

5120-12-362-9607
Mechanical Puller

123629607
063765: RNCC: 3 | RNVC: 2

21 Apr 2004

5120-12-127-8198

5120-12-023-1511

5120-12-123-5515
Socket Wrench

30 May 1969

5120-12-156-2431
Swivel Knob Jeweler's Screwdriver

121562431
06017: RNCC: 3 | RNVC: 2
06017: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-367-9649
Mechanical Puller

123679649
714523130: RNCC: 3 | RNVC: 2

10 Nov 2005

5120-12-341-4671
Mechanic's Bench Block

123414671
WRYUG7711: RNCC: 3 | RNVC: 2
A049530020010: RNCC: 5 | RNVC: 2

6 Sep 1996

5120-12-350-1655
Elektron Auszieher

123501655
54.0056.185.00: RNCC: 3 | RNVC: 2

23 Feb 2000

5120-12-319-9425
Stift Spannkloben

5120-12-194-4133
Flat Tip Screwdriver

121944133
836-6: RNCC: 3 | RNVC: 2
1050-250X14: RNCC: 3 | RNVC: 2
660300-14: RNCC: 3 | RNVC: 2
405 23 08: RNCC: 3 | RNVC: 2
133-2.5X14: RNCC: 3 | RNVC: 9
TVA5120-2-263-019: RNCC: 5 | RNVC: 1
3930140047: RNCC: 5 | RNVC: 2
TVA5120-2-263-019-1.1.23: RNCC: 5 | RNVC: 2
03030: RNCC: 5 | RNVC: 9
66030-14: RNCC: 5 | RNVC: 9

3 Nov 1982

5120-12-180-6202
Torch And Regulator Wrench

121806202
400 231: RNCC: 3 | RNVC: 9

21 Sep 1979

5120-12-190-6772
Aligning Punch

121906772
F30274272: RNCC: 3 | RNVC: 2
F361050274272: RNCC: 5 | RNVC: 9

8 Dec 1981

5120-12-389-7434
Socket Head Screw Key

123897434
000000007138: RNCC: 3 | RNVC: 2

20 Aug 2012

5120-12-159-5793
Mechanical Puller

121595793
321589043300: RNCC: 3 | RNVC: 2
3215890433: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-346-6810
Montierhuelse

123466810
41121-T601: RNCC: 3 | RNVC: 2

25 Aug 1998

5120-12-326-5287
Bearing And Bushing Inserter

123265287
4900328: RNCC: 3 | RNVC: 2

1 Oct 1991

5120-12-171-9515
Montagewerkzeug

121719515
1X56136426: RNCC: 3 | RNVC: 2

5 Dec 1977

5120-12-364-3452
Female Square Drive Screwdriver Bit Holder

123643452
12180026-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-149-4883
Spre Montagehuelse

121494883
4P3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-146-5121

5120-12-376-3771
Screwdriver Bit

123763771
05002936001: RNCC: 3 | RNVC: 2
84SW2,5-SW2,5: RNCC: 5 | RNVC: 2

22 Sep 2008

5120-12-147-6416
Pipe Wrench

121476416
210-8: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-192-7121
Face Spanner Wrench Socket

121927121
01TC32298: RNCC: 3 | RNVC: 2

17 May 1982

5120-12-172-6381
Dorn

121726381
1X56099069: RNCC: 3 | RNVC: 2
V99069: RNCC: 5 | RNVC: 2
0535408: RNCC: 5 | RNVC: 2
535408: RNCC: 5 | RNVC: 9

31 Jan 1978

5120-12-326-5303
Mechanical Puller

123265303
8524730: RNCC: 3 | RNVC: 2

1 Oct 1991

5120-12-176-2810
Bearing And Bushing Inserter

121762810
312589131500: RNCC: 3 | RNVC: 2
312 589 13 15 00: RNCC: 5 | RNVC: 2

23 Nov 1978

5120-12-139-2481
Auszieh- Und Eindru

121392481
006M01900: RNCC: 3 | RNVC: 2
VM70438: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-337-5484
Montierhuelse

123375484
62749502: RNCC: 3 | RNVC: 2
62749501: RNCC: 5 | RNVC: 9

10 Mar 1995

5120-12-363-2188
Screwdriver Bit

123632188
F30376007: RNCC: 3 | RNVC: 2

13 May 2004

5120-12-182-6280
Haltevorrichtung

121826280
387589036300: RNCC: 3 | RNVC: 2
387 589 03 63 00: RNCC: 5 | RNVC: 2
352589003702: RNCC: 5 | RNVC: 9

20 Feb 1980

5120-12-368-4296
Socket Wrench Set

123684296
854F: RNCC: 3 | RNVC: 2

9 Mar 2006

5120-12-024-7140

5120-12-129-1380

5120-12-316-5273
Face Spanner Wrench Socket

123165273
4987047: RNCC: 3 | RNVC: 2

23 Jan 1989

5120-12-133-0450
Drive Pin Punch

30 May 1969

5120-12-328-4628
Seal Inserter

123284628
F361160372543: RNCC: 3 | RNVC: 2
F30372543: RNCC: 5 | RNVC: 2

21 May 1992

5120-12-328-6987
Eindrueckwerkzeug

123286987
F6144871: RNCC: 3 | RNVC: 2
F601002144871: RNCC: 5 | RNVC: 2

16 Jun 1992

5120-12-126-1828

5120-12-311-9438
Fixed Open End Wrench Set

123119438
NO PRIMARY REF 12-311-9438: RNCC: 3 | RNVC: 2
160741: RNCC: 5 | RNVC: 9
1932 W-Z/8T: RNCC: 5 | RNVC: 9

2 Nov 1987

5120-12-368-1176
Flat Tip Screwdriver

123681176
73010001-TCS: RNCC: 3 | RNVC: 2

12 Dec 2005

5120-12-181-1570
Screwdriver Bit

121811570
1090-5: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-341-0583
Digging Pick

123410583
SPITZHACKE: RNCC: 3 | RNVC: 2

24 Jul 1996

5120-12-371-5177
Ge Montierwerkzeug

123715177
71007525: RNCC: 3 | RNVC: 2

11 Apr 2007

5120-12-150-6261
Montage Bolzen

121506261
510267: RNCC: 2 | RNVC: 2
510267: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-151-6590
Sp Nietvorrichtung

121516590
WKW90090600V15: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-192-7107
Bearing And Bushing Inserter

121927107
01TC33501: RNCC: 3 | RNVC: 2

17 May 1982

5120-12-335-4086
Mechanical Puller

123354086
0851 6839: RNCC: 3 | RNVC: 2
8516839: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-367-8367
Spanner Wrench

123678367
F010221: RNCC: 3 | RNVC: 2

21 Oct 2005

5120-12-369-6314
Hand Hammer

123696314
2101: RNCC: 3 | RNVC: 2
00.74.03.31: RNCC: 5 | RNVC: 2

3 Aug 2006

5120-12-345-6855
Pliers

123456855
RX7892: RNCC: 3 | RNVC: 2
0103232: RNCC: 5 | RNVC: 2

15 Apr 1998

5120-12-379-5467
Pipe Wrench

123795467
83 30 015: RNCC: 3 | RNVC: 2
6435800: RNCC: 3 | RNVC: 2
4003773014256: RNCC: 5 | RNVC: 2
6435800: RNCC: 5 | RNVC: 2
179 1.1/2: RNCC: 5 | RNVC: 2
179 1.1/2: RNCC: 5 | RNVC: 2

6 Aug 2009

5120-12-342-1469
Craftsman's Tweezers

123421469
47002600: RNCC: 3 | RNVC: 2
SMD26SA: RNCC: 5 | RNVC: 2

18 Dec 1996

5120-12-365-7818
Craftsman's Tweezers

123657818
T2343: RNCC: 3 | RNVC: 2

2 Feb 2005

5120-12-131-4323
Saddler's Harness Awl Blade

121314323
261GR3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-323-7581
Driftpin

123237581
99360608: RNCC: 3 | RNVC: 2
360 608: RNCC: 5 | RNVC: 2

13 Dec 1990

5120-12-358-3579
Piston Ring Compressor

123583579
3907.00027.000: RNCC: 3 | RNVC: 2
83091440057: RNCC: 5 | RNVC: 2

14 Oct 2002

5120-12-377-2978
Spade

123772978
061857: RNCC: 3 | RNVC: 2

5 Jan 2009

5120-12-126-1914
Hand Melting Ladle

121261914
13561: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-349-0046
Box Wrench Set

123490046
1943M-7T: RNCC: 3 | RNVC: 2

13 Sep 1999

5120-12-023-1420

5120-12-135-2354

5120-12-319-6849
W Spannvorrichtung

123196849
5801411-606: RNCC: 3 | RNVC: 2

25 Oct 1989

5120-12-022-8073

5120-12-380-2475
Hand Roller

123802475
125.488: RNCC: 3 | RNVC: 2
4128005: RNCC: 5 | RNVC: 2

9 Oct 2009

5120-12-360-7275
Electronic Equipment Alignment Tool

123607275
1-465: RNCC: 3 | RNVC: 2

2 Jul 2003

5120-12-334-0413
Ratchet Wrench

123340413
R3-3-SKT19: RNCC: 3 | RNVC: 2

14 Mar 1994

5120-12-329-6271
Mechanical Puller Forcing Screw

123296271
0850 1857.001: RNCC: 3 | RNVC: 2
850 1857FC T.1: RNCC: 5 | RNVC: 2
8501857.001: RNCC: 5 | RNVC: 2

10 Sep 1992

5120-12-364-0742
Montierhuelse

123640742
0986612147: RNCC: 3 | RNVC: 2
KDEP 1593: RNCC: 5 | RNVC: 2

18 Aug 2004

5120-12-368-1988
Socket Wrench Handle

123681988
11051010-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-389-5141
Torque Wrench Adapter

123895141
R819037: RNCC: 3 | RNVC: 2

17 Jul 2012

5120-12-336-5078
Bearing And Bushing Inserter

123365078
0851 6870: RNCC: 3 | RNVC: 2
8516870: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-317-0655
Driftpin

123170655
136589006100: RNCC: 3 | RNVC: 2

7 Mar 1989

5120-12-328-6644
Mechanical Puller

123286644
57385160: RNCC: 3 | RNVC: 9

12 Jun 1992

5120-12-356-7025
Drive Pin Punch

123567025
V850: RNCC: 3 | RNVC: 2

26 Mar 2002

5120-12-149-7908
Anziehvorrichtung

121497908
838589175900: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-135-5968

5120-12-321-9041
Body And Fender Spoon

123219041
1930: RNCC: 3 | RNVC: 2
5141980021: RNCC: 5 | RNVC: 2
107617: RNCC: 5 | RNVC: 9
3741: RNCC: 5 | RNVC: 9

9 Jul 1990

5120-12-141-0862
Kup Anschlagbuegel

121410862
88624940100018: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-392-7492
Box Wrench

123927492
SEWZG021: RNCC: 3 | RNVC: 2

4 Jul 2013

5120-12-318-6031
Socket Wrench

123186031
1130P: RNCC: 3 | RNVC: 2

31 Jul 1989

5120-12-302-7413
Spanner Wrench

123027413
492100: RNCC: 3 | RNVC: 2

28 Jan 1985

5120-12-177-0295
Open End Wrench

121770295
363800: RNCC: 3 | RNVC: 9

8 Jan 1979

5120-12-389-2050
Pliers

123892050
210589003700: RNCC: 3 | RNVC: 2
210589003700: RNCC: 5 | RNVC: 2

5 Jun 2012

5120-12-377-0636
Hand Material Handling Hook

123770636
056323: RNCC: 3 | RNVC: 2

10 Dec 2008

5120-12-126-2965
Open End Wrench

121262965
4X4-5-714: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-326-0075
Spanner Wrench

123260075
2500194-992420.000.0: RNCC: 2 | RNVC: 2
2500194-992420.000.0: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-172-0914
Socket Head Screw Key

121720914
1997LM2: RNCC: 3 | RNVC: 2
105882: RNCC: 5 | RNVC: 2

19 Dec 1977

5120-12-305-6592
Spanner Wrench

123056592
196207: RNCC: 3 | RNVC: 2
196207: RNCC: 5 | RNVC: 9
264-1070: RNCC: 5 | RNVC: 9
196207: RNCC: 5 | RNVC: 9

2 Dec 1985

5120-12-334-2166
Hand Shovel

123342166
WRSOM0143: RNCC: 3 | RNVC: 2

13 Apr 1994

5120-12-365-9446
Swivel Knob Jeweler's Screwdriver Set

123659446
T4883X ESD: RNCC: 3 | RNVC: 2

21 Feb 2005

5120-12-362-4331
Socket Head Screw Key Set

123624331
T4402: RNCC: 3 | RNVC: 2

24 Feb 2004

5120-12-370-5558
Craftsman's Tweezers

123705558
924442: RNCC: 3 | RNVC: 2
00.18.92.49: RNCC: 5 | RNVC: 2
4003773054887: RNCC: 5 | RNVC: 2

21 Nov 2006

5120-12-362-3800
Mechanical Puller Forcing Screw

123623800
5590002025: RNCC: 3 | RNVC: 2
F6374262: RNCC: 5 | RNVC: 2

13 Feb 2004

5120-12-190-6070
Drift Punch

121906070
F30276748: RNCC: 3 | RNVC: 2
5110700007: RNCC: 5 | RNVC: 2
F361130276748: RNCC: 5 | RNVC: 9

7 Dec 1981

5120-12-382-3957
Fixed Open End Wrench Set

123823957
AB 9012: RNCC: 3 | RNVC: 2

15 Jun 2010

5120-12-190-7765
Haltewerkzeug

121907765
61974600: RNCC: 3 | RNVC: 2
619 746 00: RNCC: 5 | RNVC: 9

14 Dec 1981

5120-12-164-6314
Abziehvorrichtung

121646314
264-271: RNCC: 3 | RNVC: 2
264-271: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-185-9324
Lager- Und Einsatz

121859324
5870055020: RNCC: 3 | RNVC: 2
2250330: RNCC: 5 | RNVC: 2
5870055020: RNCC: 5 | RNVC: 9

11 Nov 1980

5120-12-364-4834
Socket Wrench Crowfoot Attachment

123644834
01210014-TCS: RNCC: 3 | RNVC: 2

1 Oct 2004

5120-12-384-0071
Pliers

123840071
7092648: RNCC: 3 | RNVC: 2

11 Jan 2011

5120-12-023-2580

5120-12-358-8971
Socket Wrench Handle

123588971
80996270001: RNCC: 3 | RNVC: 2

26 Nov 2002

5120-12-363-4249
Swivel Knob Jeweler's Screwdriver Set

123634249
613465010: RNCC: 3 | RNVC: 2

10 Jun 2004

5120-12-373-4479
Socket Wrench Socket

123734479
TX 20 E5: RNCC: 3 | RNVC: 2
4010886618769: RNCC: 5 | RNVC: 2
6187640: RNCC: 5 | RNVC: 2

5 Nov 2007

5120-12-332-6132
Spanner Wrench

123326132
532113-8126.901: RNCC: 3 | RNVC: 2
532113-8126.901: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-347-1873
Montierdorn

123471873
0852 5101: RNCC: 3 | RNVC: 2

10 Nov 1998

5120-12-383-6927
Hydraulic Adapter

123836927
1X56.136.603: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-12-345-5143
Inserted Hammer Face

123455143
10956R-35: RNCC: 3 | RNVC: 2
79 05 00 35: RNCC: 5 | RNVC: 2

26 Mar 1998

5120-12-304-6325
Swivel Knob Jeweler's Screwdriver

123046325
122761: RNCC: 3 | RNVC: 2
122761: RNCC: 5 | RNVC: 2
122761: RNCC: 5 | RNVC: 9

7 Aug 1985

5120-12-372-0069
Screw Extractor

123720069
701737: RNCC: 3 | RNVC: 2

11 Jun 2007

5120-12-369-0953
Mechanical Puller

123690953
6530863: RNCC: 3 | RNVC: 2

22 May 2006

5120-12-010-9624

5120-12-129-3318

5120-12-334-9621
Valve Spring Compressor

123349621
748.131.5: RNCC: 3 | RNVC: 2

6 Jul 1994

5120-12-349-4142
Montierdorn

123494142
2300211-990600.010.0: RNCC: 2 | RNVC: 2
2300211-990600.010.0: RNCC: 3 | RNVC: 2

11 Nov 1999

5120-12-120-4957
Adjustable Wrench

121204957
594-150: RNCC: 3 | RNVC: 2
1335-150: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-187-5297
Socket Wrench

121875297
NO PRIMARY REF 12-187-5297: RNCC: 3 | RNVC: 2
48Z-C16X21: RNCC: 5 | RNVC: 9
48Z16X21: RNCC: 5 | RNVC: 9
48Z-C16X21: RNCC: 5 | RNVC: 9

13 Apr 1981

5120-12-370-9926
Crimping Tool Die

123709926
2418396: RNCC: 3 | RNVC: 2

24 Jan 2007

5120-12-170-8654
Spanner Wrench

121708654
342093: RNCC: 3 | RNVC: 2

17 Aug 1977

5120-12-149-5877

5120-12-325-5629
Socket Wrench Socket

123255629
675589001300: RNCC: 3 | RNVC: 2

18 Jun 1991

5120-12-380-0608
Flat Tip Screwdriver

123800608
0000685022: RNCC: 3 | RNVC: 2

23 Sep 2009

5120-12-374-6689
Hydraulic Adapter

123746689
T80091550: RNCC: 3 | RNVC: 2

5 Mar 2008

5120-12-150-3931
Ke Haltevorrichtung

121503931
1X46106158: RNCC: 3 | RNVC: 2
V106158: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-362-6548
Offset Screwdriver

123626548
54.0084.960.87: RNCC: 3 | RNVC: 2
2047PR3X4: RNCC: 5 | RNVC: 2

16 Mar 2004

5120-12-339-0370
Socket Wrench Set

123390370
20DBA: RNCC: 3 | RNVC: 2
617202: RNCC: 5 | RNVC: 2

29 Sep 1995

5120-12-130-6250
Open End Wrench

121306250
LG142636: RNCC: 3 | RNVC: 2
WZ43: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-318-0782
Mater Saug- Griff

123180782
75341001: RNCC: 3 | RNVC: 9

8 Jun 1989

5120-12-335-1057
Hand Terminal Crimping Tool

123351057
TYP CGR66: RNCC: 3 | RNVC: 2
9700215C: RNCC: 3 | RNVC: 9
K401200: RNCC: 5 | RNVC: 2

25 Jul 1994

5120-12-390-4991
Socket Wrench Set

123904991
918.0646: RNCC: 3 | RNVC: 2

16 Nov 2012

5120-12-022-7376

5120-12-334-3565
Seal Inserter

123343565
S52275: RNCC: 3 | RNVC: 2

29 Apr 1994

5120-12-023-0180

5120-12-151-8434

5120-12-173-1166
Einsteck Schluessel

121731166
4149: RNCC: 3 | RNVC: 9

20 Mar 1978

5120-12-364-1724
Spanner Wrench

123641724
F30450458: RNCC: 3 | RNVC: 2

27 Aug 2004

5120-12-332-8478
Driftpin

123328478
4877801: RNCC: 3 | RNVC: 2

27 Sep 1993

5120-12-336-5096
Seal Inserter

123365096
0851 5140: RNCC: 3 | RNVC: 2
8515140: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-070-0194

5120-12-092-2269

5120-12-311-2616
Spitzhack Aufnahme

123112616
2300005-4154.01: RNCC: 2 | RNVC: 2
2300005-4154.01: RNCC: 3 | RNVC: 2
2300005-4154.01: RNCC: 5 | RNVC: 2
2300005-4154.01: RNCC: 5 | RNVC: 9

11 Aug 1987

5120-12-389-2666
Socket Wrench Screwdriver Attachment

123892666
6272080: RNCC: 3 | RNVC: 2
4010886627204: RNCC: 5 | RNVC: 2
6272080: RNCC: 5 | RNVC: 2
ITX 32 T70: RNCC: 5 | RNVC: 2
4010886627204: RNCC: 5 | RNVC: 2
ITX 32 T70: RNCC: 5 | RNVC: 2

14 Jun 2012

5120-12-023-0172

5120-12-357-7611
Electrical Contact Inserter And Remover

123577611
5300.780.007.000: RNCC: 3 | RNVC: 2

19 Jul 2002

5120-12-357-7358
Mechanical Puller

123577358
F30276379: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-390-1912
Mechanical Puller Attachment

123901912
F6452193: RNCC: 3 | RNVC: 2

12 Oct 2012

5120-12-345-3558
Montierdorn

123453558
437 589 03 43 00: RNCC: 3 | RNVC: 2

4 Mar 1998

5120-12-319-9807
Rivet Bucking Bar

123199807
610: RNCC: 3 | RNVC: 2

24 Nov 1989

5120-12-044-4885

5120-12-305-8598
Mechanical Puller Attachment

123058598
4900059-752010.000.0: RNCC: 2 | RNVC: 2
4900059-752010.000.0: RNCC: 3 | RNVC: 2

27 Dec 1985

5120-12-342-8413
Mechanical Puller

123428413
18 910 0902: RNCC: 3 | RNVC: 2

9 Apr 1997

5120-12-364-6772
Drive Pin Punch

123646772
70060010-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-319-3402
Socket Wrench Socket

123193402
99354211: RNCC: 3 | RNVC: 2

25 Sep 1989

5120-12-313-3779
Mechanical Puller Adapter

123133779
80996020119: RNCC: 3 | RNVC: 2
80.99602.0119: RNCC: 5 | RNVC: 2

26 Mar 1988

5120-12-139-2499
Socket Wrench Handle Bar

121392499
016M07000: RNCC: 3 | RNVC: 2
VM68091: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-320-7658
Mechanical Puller

123207658
0851 6867: RNCC: 3 | RNVC: 2
8516867: RNCC: 5 | RNVC: 2

14 Feb 1990

5120-12-188-7646
Zentrierbolzen

121887646
406589021500: RNCC: 3 | RNVC: 2

28 Jul 1981

5120-12-314-9259
Screw Thread Insert Inserter

123149259
6100030.00: RNCC: 3 | RNVC: 2
601030: RNCC: 5 | RNVC: 2

27 Aug 1988

5120-12-314-8446

5120-12-022-0322

5120-12-320-7677
Bearing And Bushing Inserter

123207677
62254300: RNCC: 3 | RNVC: 2

14 Feb 1990

5120-12-174-7353
Open End Box Wrench

121747353
105-45051W10: RNCC: 3 | RNVC: 2

25 Jul 1978

5120-12-390-3048
Cable Type Ratchet Lever Puller

123903048
T532: RNCC: 3 | RNVC: 2

29 Oct 2012

5120-12-376-3731
Hand Shovel

123763731
0210033000: RNCC: 3 | RNVC: 9
02100: RNCC: 5 | RNVC: 9

19 Sep 2008

5120-12-393-8480
Mounting To Sleeve

123938480
7077747: RNCC: 3 | RNVC: 2

16 Oct 2013

5120-12-130-6244
Combination Box And Open End Wrench

121306244
LG142633: RNCC: 3 | RNVC: 2
WZ39: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-199-5564
Screw Thread Insert Inserter

121995564
SRM 1215W: RNCC: 3 | RNVC: 2
SRM 1215W: RNCC: 5 | RNVC: 9

11 May 1984

5120-12-139-8576
Abziehvorrichtung

121398576
3125890733: RNCC: 3 | RNVC: 2
312589073300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-383-6833
Spanner Wrench

123836833
1X56.136.674: RNCC: 3 | RNVC: 2

24 Nov 2010

5120-12-139-3158

5120-12-139-5783

5120-12-140-6779
Montagestutzen

121406779
R17177: RNCC: 3 | RNVC: 2
R17177: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-5069
Wrench Kit

123715069
1557/58: RNCC: 3 | RNVC: 2

10 Apr 2007

5120-12-370-4043
Pliers

123704043
65325190: RNCC: 3 | RNVC: 2

2 Nov 2006

5120-12-370-9119
Socket Head Screw Key

123709119
0613 140 10: RNCC: 3 | RNVC: 2
54961: RNCC: 3 | RNVC: 2
00.43.39.71: RNCC: 5 | RNVC: 2
4001002549616: RNCC: 5 | RNVC: 2

16 Jan 2007

5120-12-197-5797
Auswechs Klemmteil

121975797
5801411-6914: RNCC: 3 | RNVC: 2
1648098: RNCC: 5 | RNVC: 9

7 Nov 1983

5120-12-195-2639
Socket Wrench Socket

121952639
420 6572: RNCC: 3 | RNVC: 2
4206572: RNCC: 3 | RNVC: 2
C7800 14: RNCC: 3 | RNVC: 2

31 Jan 1983

5120-12-308-8320
Bearing And Bushing Inserter

123088320
80996170138: RNCC: 3 | RNVC: 2
80.99617.0138: RNCC: 5 | RNVC: 2

21 Nov 1986

5120-12-305-7034
Drahtwickl Einsatz

123057034
WB24M: RNCC: 3 | RNVC: 9
WB24M: RNCC: 5 | RNVC: 9
WB24M: RNCC: 5 | RNVC: 9

5 Dec 1985

5120-12-193-6669

5120-12-312-7688
Schluessel

123127688
305322: RNCC: 3 | RNVC: 2

3 Feb 1988

5120-12-382-7927
Socket Wrench Handle

123827927
400 DRALL: RNCC: 3 | RNVC: 2
11050011: RNCC: 5 | RNVC: 2
4018754157228: RNCC: 5 | RNVC: 2

10 Aug 2010

5120-12-357-8943
Ratchet Wrench

123578943
714 251 12: RNCC: 3 | RNVC: 2

8 Aug 2002

5120-12-362-4429
Craftsman's Tweezers

123624429
T2328: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-12-316-1244
Hand Contact Burnisher

123161244
06831048: RNCC: 3 | RNVC: 9

23 Dec 1988

5120-12-310-5403
Bearing And Bushing Inserter

123105403
80996040043: RNCC: 3 | RNVC: 2
80.99604.0043: RNCC: 5 | RNVC: 2

29 May 1987

5120-12-354-8158
Torque Wrench

123548158
4550-05: RNCC: 3 | RNVC: 2
4550-05: RNCC: 3 | RNVC: 2

28 Aug 2001

5120-12-303-8493
Mechanical Puller Adapter

123038493
3B33-4-1: RNCC: 3 | RNVC: 2

8 May 1985

5120-12-171-0564
Dorn

121710564
327589001500: RNCC: 3 | RNVC: 2
327 589 00 1500: RNCC: 5 | RNVC: 2

1 Sep 1977

5120-12-332-8094
Spanner Wrench

123328094
T40982: RNCC: 3 | RNVC: 2
T40982: RNCC: 5 | RNVC: 9

22 Sep 1993

5120-12-390-4094
Bearing Receptacle

123904094
F6270931: RNCC: 3 | RNVC: 2

9 Nov 2012

5120-12-305-2513
Bearing And Bushing Inserter

123052513
6886201W11: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-346-3163
Eindrueckwerkzeug

123463163
142850: RNCC: 3 | RNVC: 2

9 Jul 1998

5120-12-127-6303

5120-12-332-5319
Auswechselwerkzeug

123325319
VW 3248: RNCC: 3 | RNVC: 2
3248: RNCC: 3 | RNVC: 2

18 Aug 1993

5120-12-381-9667
Oil Filter Wrench

123819667
10.20.000.001: RNCC: 3 | RNVC: 2
2171-8: RNCC: 3 | RNVC: 2
4000896013463: RNCC: 5 | RNVC: 2

21 Apr 2010

5120-12-384-1075
Piston Inserter

123841075
F6348802: RNCC: 3 | RNVC: 2

21 Jan 2011

5120-12-319-3185
Crimping Tool Die

123193185
62141 103: RNCC: 3 | RNVC: 2
62051 103: RNCC: 5 | RNVC: 2

22 Sep 1989

5120-12-140-9704
Ein-Und Ausdruecker

121409704
0276134100: RNCC: 3 | RNVC: 2
0277008000: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-369-6102
Blind Riveter Mandrel

123696102
09489516: RNCC: 3 | RNVC: 2

1 Aug 2006

5120-12-139-3088

5120-12-395-8093

5120-12-364-3485
Hand Hammer

123643485
70160032-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-010-0610

5120-12-316-3264
Spanner Wrench

123163264
539130: RNCC: 3 | RNVC: 2
532252SCHRAUBENDREHER: RNCC: 5 | RNVC: 2

10 Jan 1989

5120-12-126-1699

5120-12-321-1086
Lager- Und Einsatz

123211086
F30370264: RNCC: 3 | RNVC: 2
F361130370264: RNCC: 5 | RNVC: 2
F30370264: RNCC: 5 | RNVC: 2
F361130370264: RNCC: 5 | RNVC: 2
F30370264: RNCC: 5 | RNVC: 2
F361130370264: RNCC: 5 | RNVC: 9

28 Mar 1990

5120-12-134-2654
Abziehvorrichtung

121342654
001M01000: RNCC: 3 | RNVC: 2
VM67305: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-158-1062
Ausbauvorrichtung

121581062
VG95211-ML-121581062: RNCC: 2 | RNVC: 2
105-071-465-1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5429
Spanner Wrench

121235429
DIN3223-A: RNCC: 2 | RNVC: 2
696: RNCC: 3 | RNVC: 2
ADIN3223: RNCC: 5 | RNVC: 2
081171071021: RNCC: 5 | RNVC: 2
162971: RNCC: 5 | RNVC: 2
710-71-021: RNCC: 5 | RNVC: 9
SCHLUESSELDIN3223: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-321-9364
Jaw Cable Grip

123219364
AKL SS: RNCC: 3 | RNVC: 2
AKL 2: RNCC: 5 | RNVC: 9

10 Jul 1990

5120-12-383-1191
Socket Wrench Socket

123831191
F30378587: RNCC: 3 | RNVC: 2

15 Sep 2010

5120-12-134-2730
Socket Wrench

121342730
027M07200: RNCC: 3 | RNVC: 2
VM65789: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-153-5070
Montagestutzen

121535070
V0M018L: RNCC: 3 | RNVC: 2
V0M018L: RNCC: 5 | RNVC: 2
V0RM0NTAGESTUTZEN18L: RNCC: 5 | RNVC: 2
909129407: RNCC: 5 | RNVC: 2
101746: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-150-5716
Mechanical Puller Step Plate

121505716
83789323300: RNCC: 3 | RNVC: 2
837589323300: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-313-8925
Flat Tip Screwdriver Set

123138925
639-S6: RNCC: 3 | RNVC: 2

18 May 1988

5120-12-371-4146
Hand Hammer

123714146
5039.98.0500: RNCC: 3 | RNVC: 2
5039980500: RNCC: 5 | RNVC: 2

27 Mar 2007

5120-12-127-4108
Fuehrungshuelse

121274108
64035411900018: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-189-4701
Bearing And Bushing Inserter

121894701
343589031500: RNCC: 3 | RNVC: 2

29 Sep 1981

5120-12-387-5444
Mechanical Puller Set

123875444
0691500169: RNCC: 3 | RNVC: 2

6 Jan 2012

5120-12-384-0400
Mounting Sleeve

123840400
F6784403: RNCC: 3 | RNVC: 2

13 Jan 2011

5120-12-368-1997
Hand Hammer

123681997
70110002-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-383-7009
Mechanical Puller

123837009
1X56.136.575: RNCC: 3 | RNVC: 2

26 Nov 2010

5120-12-021-2524

5120-12-377-2240
Socket Wrench Handle

123772240
435SGS: RNCC: 3 | RNVC: 2

18 Dec 2008

5120-12-351-4241
Seal Inserter

123514241
9254924000: RNCC: 3 | RNVC: 2

25 Jul 2000

5120-12-336-5067
Seal Inserter And Remover

123365067
0852 2458: RNCC: 3 | RNVC: 2
8522458: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-369-1054
Screwdriver Bit Set

123691054
3460S: RNCC: 3 | RNVC: 2
01.86.06.79: RNCC: 5 | RNVC: 2

22 May 2006

5120-12-372-2176
Socket Head Screw Key

123722176
05024208001: RNCC: 3 | RNVC: 2
967PKL-TX30: RNCC: 5 | RNVC: 2

28 Jun 2007

5120-12-338-5270
Hand Tube Flaring Punch

123385270
605100: RNCC: 3 | RNVC: 2

24 Jul 1995

5120-12-340-9935
Fixed Open End Wrench Set

123409935
156/6M: RNCC: 3 | RNVC: 2

13 Jul 1996

5120-12-338-4049
Mechanical Puller Attachment

123384049
0851 3711.003: RNCC: 3 | RNVC: 2

4 Jul 1995

5120-12-387-5582
Socket Wrench

123875582
176.09038: RNCC: 3 | RNVC: 2

10 Jan 2012

5120-12-140-1152

5120-12-316-7596
Mecha Aufnahmeteil

123167596
1121-14101W8.01: RNCC: 3 | RNVC: 2

9 Feb 1989

5120-12-129-3309
Open End Wrench

121293309
6-5-16X3-8: RNCC: 3 | RNVC: 2
6-5/16X3/8W: RNCC: 3 | RNVC: 2
039712: RNCC: 3 | RNVC: 2
TVA5120-2-263-028: RNCC: 5 | RNVC: 1
TVA5120-2-263-028-1.1.33: RNCC: 5 | RNVC: 2
450W5-16X3-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-150-7600
Spanner Wrench

121507600
510280-00-05: RNCC: 2 | RNVC: 2
JB168-40-01: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-174-2324
Einbauvorrichtung

121742324
2300002-261300.000: RNCC: 2 | RNVC: 2
2300002-261300.000: RNCC: 3 | RNVC: 2
2300002-261300: RNCC: 5 | RNVC: 9

15 Jun 1978

5120-12-310-0736
Spanner Wrench

123100736
702732-0192.901: RNCC: 3 | RNVC: 2

3 Apr 1987

5120-12-196-3969
Sheet Metalworking Dolly Block

121963969
323-36: RNCC: 3 | RNVC: 2
1625: RNCC: 3 | RNVC: 2
323130: RNCC: 5 | RNVC: 2
3739: RNCC: 5 | RNVC: 9

4 Jul 1983

5120-12-319-7210
Screwdriver Bit

123197210
4900059-721350.001.0: RNCC: 2 | RNVC: 2
4900059-721350.001.0: RNCC: 3 | RNVC: 2

27 Oct 1989

5120-12-382-5755
Socket Head Screw Key

123825755
43150004-TCS: RNCC: 3 | RNVC: 2

12 Jul 2010

5120-12-126-1814

5120-12-362-5489
Socket Wrench

123625489
611 589 00 03 00: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-12-362-4723
Combination Box And Open End Wrench

123624723
54.0084.960.54: RNCC: 3 | RNVC: 2
13-20: RNCC: 5 | RNVC: 2

27 Feb 2004

5120-12-330-8536
Hand Scissors Jack

123308536
1A240344: RNCC: 3 | RNVC: 2
G517: RNCC: 5 | RNVC: 2

16 Feb 1993

5120-12-368-1238
Torque Wrench Adapter

123681238
731-40-16: RNCC: 3 | RNVC: 2
58214016: RNCC: 5 | RNVC: 2

12 Dec 2005

5120-12-181-6868
Ar Haltevorrichtung

121816868
10-222: RNCC: 3 | RNVC: 9

10 Dec 1979

5120-12-157-6778
Kabelschuhh Matrize

121576778
B240WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-176-1099
Einbauwerkzeug

121761099
VW415A: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-378-9931
Leveling-Support Jack Set

123789931
245: RNCC: 3 | RNVC: 2

10 Jun 2009

5120-12-331-7037
Lamp Cap Extractor

123317037
303148: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-12-139-3080

5120-12-126-1213

5120-12-334-0398
Hand Roller

123340398
3059: RNCC: 3 | RNVC: 2

14 Mar 1994

5120-12-366-9159
Mechanical Puller

123669159
ZG8253G203: RNCC: 3 | RNVC: 2

21 Jun 2005

5120-12-366-8425
Spanner Wrench

123668425
CBD45094P03: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-12-388-3978
Qu Montierwerkzeug

123883978
730589004300: RNCC: 3 | RNVC: 2

19 Mar 2012

5120-12-131-4328
Stabbing Awl

121314328
TL5120-0114-2: RNCC: 2 | RNVC: 2
183: RNCC: 5 | RNVC: 2
1044-1-4-200: RNCC: 5 | RNVC: 2
677-200: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-181-2904
Einstellvorrichtung

121812904
23305-264165.00.0: RNCC: 2 | RNVC: 2
23305-264165-00-0: RNCC: 3 | RNVC: 2

12 Nov 1979

5120-12-126-2950
Screw Extractor

121262950
TL5120-0052-40A: RNCC: 2 | RNVC: 2
1413-6,4: RNCC: 3 | RNVC: 2
104045: RNCC: 5 | RNVC: 2
1413: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-374-7086
Mechanical Puller

123747086
113-24: RNCC: 3 | RNVC: 2
08996059014: RNCC: 5 | RNVC: 2
08.99605-9014: RNCC: 5 | RNVC: 2

10 Mar 2008

5120-12-376-6435
Swivel Knob Jeweler's Screwdriver

123766435
T4880XES310: RNCC: 3 | RNVC: 2

23 Oct 2008

5120-12-384-8597
Saddler's Harness Awl Blade

123848597
50.000.011: RNCC: 3 | RNVC: 2

5 Apr 2011

5120-12-339-4604
Swivel Knob Jeweler's Screwdriver

123394604
ESD140430: RNCC: 3 | RNVC: 2

24 Nov 1995

5120-12-091-6446

5120-12-364-5629
Open End Wrench

123645629
40033236-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-303-8492
Lining Bar

123038492
3B33-3: RNCC: 3 | RNVC: 2

8 May 1985

5120-12-181-8126
Schraubendrehereins

121818126
923: RNCC: 3 | RNVC: 9
VW172: RNCC: 3 | RNVC: 9
VW172: RNCC: 5 | RNVC: 2

17 Dec 1979

5120-12-317-6020
Pin Inserter

123176020
530012: RNCC: 2 | RNVC: 9

20 Apr 1989

5120-12-130-1793
Piston Ring Compressor

121301793
504216A3: RNCC: 3 | RNVC: 2
4915: RNCC: 5 | RNVC: 2
504216A3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-382-1926
Socket Head Screw Key

123821926
0250070S: RNCC: 3 | RNVC: 2

20 May 2010

5120-12-181-6888
Druckstueck

121816888
VW401: RNCC: 3 | RNVC: 9

10 Dec 1979

5120-12-338-1629
Socket Wrench Extension

123381629
NO PRIMARY REF 12-338-1629: RNCC: 3 | RNVC: 2
414-10: RNCC: 5 | RNVC: 9
63270-250: RNCC: 5 | RNVC: 9
11240004: RNCC: 5 | RNVC: 9

31 May 1995

5120-12-330-4481
Mechanical Puller Attachment

123304481
0852 0361.006: RNCC: 3 | RNVC: 2
8520361.006: RNCC: 5 | RNVC: 2

16 Dec 1992

5120-12-137-6302
Combination Box And Open End Wrench

121376302
UE5079: RNCC: 3 | RNVC: 2
5079: RNCC: 5 | RNVC: 2
5079: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-024-1246

5120-12-344-7836
Elektron Auszieher

123447836
54.0054.852.00: RNCC: 3 | RNVC: 2

9 Dec 1997

5120-12-390-1868
Mechanical Puller Adapter

123901868
F6370984: RNCC: 3 | RNVC: 2

12 Oct 2012

5120-12-156-1588
Screwdriver Bit

121561588
NM304-62: RNCC: 3 | RNVC: 2
NM304-02: RNCC: 5 | RNVC: 9
NM304-62: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-178-6479
Dorn

121786479
VG95211-ML-121786479: RNCC: 2 | RNVC: 2
01TC33113: RNCC: 3 | RNVC: 2

7 May 1979

5120-12-123-5892

5120-12-131-7140
Spanner Wrench

121317140
3045890407: RNCC: 3 | RNVC: 2
3045890407: RNCC: 3 | RNVC: 9
304589040700: RNCC: 5 | RNVC: 2
304589040700: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-3392
Torque Wrench

123813392
05074700001: RNCC: 3 | RNVC: 2
7440: RNCC: 5 | RNVC: 2

3 Feb 2010

5120-12-093-7597

5120-12-385-0731
Socket Wrench Handle Sliding T-Head

123850731
CH1772/44: RNCC: 3 | RNVC: 2
0005892916/00: RNCC: 5 | RNVC: 2

27 Apr 2011

5120-12-318-0776
Flat Tip Screwdriver

123180776
04143: RNCC: 3 | RNVC: 9

8 Jun 1989

5120-12-373-2647
Swivel Knob Jeweler's Screwdriver Set

123732647
05118150001: RNCC: 3 | RNVC: 2
2035/6A: RNCC: 5 | RNVC: 2

15 Oct 2007

5120-12-352-8790
Socket Head Screw Key Set

123528790
1997Z/21T: RNCC: 3 | RNVC: 2
1302436: RNCC: 5 | RNVC: 2

28 Dec 2000

5120-12-324-5286
Face Spanner Wrench Socket

123245286
944500690: RNCC: 3 | RNVC: 2

27 Feb 1991

5120-12-151-9914
Schluessel

121519914
490146: RNCC: 2 | RNVC: 2
JB146: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-388-0638
Open End Box Wrench

123880638
00497131480: RNCC: 3 | RNVC: 2

22 Feb 2012

5120-12-380-2492
Hand Roller

123802492
125.479: RNCC: 3 | RNVC: 2
4113007: RNCC: 5 | RNVC: 2

9 Oct 2009

5120-12-393-8473
Mechanical Puller Attachment

123938473
7077743: RNCC: 3 | RNVC: 2

16 Oct 2013

5120-12-166-1743
Pliers

121661743
2718: RNCC: 3 | RNVC: 2
106735: RNCC: 5 | RNVC: 2

10 Aug 1976

5120-12-186-7314
Abziehglocke

121867314
99346222: RNCC: 3 | RNVC: 2
410340: RNCC: 5 | RNVC: 9
410340: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-010-9661

5120-12-364-9201
Screwdriver Bit

123649201
02060005-TCS: RNCC: 3 | RNVC: 2

16 Nov 2004

5120-12-373-0807
Mechanical Puller Attachment

123730807
BWAC010: RNCC: 3 | RNVC: 2

25 Sep 2007

5120-12-163-6071
Torque Wrench

121636071
105-13101W1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-149-5305
Mechanical Puller

121495305
7747J: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-345-3253
We Montierwerkzeug

123453253
F0 096562: RNCC: 3 | RNVC: 2

3 Mar 1998

5120-12-328-3960
Seal Inserter

123283960
F30372974: RNCC: 3 | RNVC: 2

14 May 1992

5120-12-327-0761
Fixed Open End Wrench Set

123270761
1580001: RNCC: 3 | RNVC: 2

28 Nov 1991

5120-12-361-5770
Electrical Contact Remover

123615770
80996060601: RNCC: 3 | RNVC: 2

20 Oct 2003

5120-12-343-6922
Combination Box And Open End Wrench Set

123436922
13A-20: RNCC: 3 | RNVC: 2
96404804: RNCC: 5 | RNVC: 2

15 Jul 1997

5120-12-150-3946
Mechanical Puller

121503946
837589143300: RNCC: 3 | RNVC: 2
8375891433: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-164-8974

5120-12-177-2184
Socket Wrench Socket

121772184
NO PRIMARY REF 12-177-2184: RNCC: 3 | RNVC: 2
01720096: RNCC: 5 | RNVC: 9
40EL3BA: RNCC: 5 | RNVC: 9

19 Jan 1979

5120-12-176-8738
Montagevorrichtung

121768738
3-9314-2300-2: RNCC: 3 | RNVC: 9

20 Dec 1978

5120-12-357-7364
Socket Wrench Socket

123577364
F30149120: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-134-2728

5120-12-385-3448
Mounting Lever

123853448
001.391: RNCC: 3 | RNVC: 2

25 May 2011

5120-12-382-1585
Inspection Mirror

123821585
JA 90 000 106: RNCC: 3 | RNVC: 2

17 May 2010

5120-12-165-1723
Druckstueck

121651723
58027504500: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-330-8566
Mechanical Puller Adapter

123308566
0524029: RNCC: 3 | RNVC: 2

17 Feb 1993

5120-12-335-4440
Mechanical Puller

123354440
0852 0358: RNCC: 3 | RNVC: 2
8520358: RNCC: 5 | RNVC: 2

18 Aug 1994

5120-12-323-9361
Rohr- Zange

123239361
66-2: RNCC: 3 | RNVC: 2

10 Jan 1991

5120-12-349-3922
Eindrueckwerkzeug

123493922
2300281-264100.000.0: RNCC: 2 | RNVC: 2
2300281-264100.000.0: RNCC: 3 | RNVC: 2

9 Nov 1999

5120-12-126-1850
Tool Handle Wedge

121261850
KRALLE7: RNCC: 3 | RNVC: 2
KRALLE7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-307-5758
Offset Screwdriver

123075758
CF 491 619 AE: RNCC: 2 | RNVC: 2
CF 491 619 AE: RNCC: 3 | RNVC: 2
CF 491 619 AE: RNCC: 3 | RNVC: 2

3 Jul 1986

5120-12-309-0170
Mechanical Puller

123090170
587000045: RNCC: 3 | RNVC: 2
8213185: RNCC: 5 | RNVC: 9

8 Dec 1986

5120-12-323-0644
Hand Reel Jack

123230644
01152: RNCC: 3 | RNVC: 2

22 Oct 1990

5120-12-181-2300
Box Wrench

121812300
402589010300: RNCC: 3 | RNVC: 2

5 Nov 1979

5120-12-351-5279
Montierhuelse

123515279
9254954000: RNCC: 3 | RNVC: 2

1 Aug 2000

5120-12-304-0366
Box Wrench

123040366
DIN248-14: RNCC: 2 | RNVC: 2

31 May 1985

5120-12-383-7044
Mechanical Puller Attachment

123837044
1X56.137.082: RNCC: 3 | RNVC: 2

26 Nov 2010

5120-12-166-4568
Lamp Extractor

121664568
HS8905: RNCC: 3 | RNVC: 2
1162215: RNCC: 5 | RNVC: 2

9 Sep 1976

5120-12-358-1811
Adjustable Wrench

123581811
60-6MB: RNCC: 3 | RNVC: 2

24 Sep 2002

5120-12-382-4751
Screwdriver Handle

123824751
SQHM: RNCC: 3 | RNVC: 2
01045: RNCC: 5 | RNVC: 2

28 Jun 2010

5120-12-390-3463
Hand Terminal Crimping Tool

123903463
351212203191: RNCC: 3 | RNVC: 2

31 Oct 2012

5120-12-191-3583
Drive Pin Punch

121913583
CF493187: RNCC: 3 | RNVC: 2
CF 493 187: RNCC: 3 | RNVC: 2
CF493187: RNCC: 3 | RNVC: 2
CF 493 187: RNCC: 5 | RNVC: 2

26 Jan 1982

5120-12-123-5962
Socket Wrench Handle

121235962
DIN3122-G10: RNCC: 2 | RNVC: 2
3081: RNCC: 3 | RNVC: 2
G10DIN3122: RNCC: 5 | RNVC: 2
623636: RNCC: 5 | RNVC: 2
202428: RNCC: 5 | RNVC: 9
3081: RNCC: 5 | RNVC: 9
12080000: RNCC: 5 | RNVC: 9
5411-9I: RNCC: 5 | RNVC: 9
423: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-313-6506
Electrical Lead Fishing Tool

123136506
801-639.07.150.00: RNCC: 3 | RNVC: 2

22 Apr 1988

5120-12-316-6425
Pliers

123166425
110589006800: RNCC: 3 | RNVC: 2

30 Jan 1989

5120-12-023-2576

5120-12-135-8956

5120-12-312-2166
Werkst Druckstueck

123122166
3061: RNCC: 3 | RNVC: 2

4 Dec 1987

5120-12-336-9853
Electrical Contact Inserter And Remover

123369853
VG95236T04C002: RNCC: 2 | RNVC: 2

5 Jan 1995

5120-12-181-4009
Spindel

121814009
VG95211-ML-121814009: RNCC: 2 | RNVC: 2
105-31711W1.01: RNCC: 3 | RNVC: 2
105-31711W1-01: RNCC: 5 | RNVC: 2

19 Nov 1979

5120-12-385-3257
Cyli Mounting Tool

123853257
11.49023-0452: RNCC: 3 | RNVC: 2
055.251: RNCC: 5 | RNVC: 2

23 May 2011

5120-12-172-1850
Spanner Wrench

121721850
903-812-0111: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-180-5455
Mechanical Puller Attachment

121805455
3907-37100-090: RNCC: 3 | RNVC: 2
83091446046: RNCC: 5 | RNVC: 2
83.09144-6046: RNCC: 5 | RNVC: 2

17 Sep 1979

5120-12-127-4159
Keiltreiber

121274159
NO PRIMARY REF 12-127-4159: RNCC: 3 | RNVC: 2
10H193: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-164-6319
Mechanical Puller

121646319
264-285: RNCC: 3 | RNVC: 2
264-285: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-130-6238
Box Wrench

121306238
WZ24: RNCC: 3 | RNVC: 2
LG40987: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-127-2564

5120-12-368-5017
Torque Wrench

123685017
7147123: RNCC: 3 | RNVC: 2

20 Mar 2006

5120-12-133-4589

5120-12-130-6311
Hand Helical Spring Puller Hook

121306311
WZ8: RNCC: 3 | RNVC: 2
LG142626: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-377-0864
Quick Adjusting Screw Clamp

123770864
SGL20M: RNCC: 3 | RNVC: 2

10 Dec 2008

5120-12-363-8420
Bearing And Bushing Inserter

123638420
T671P5001227: RNCC: 3 | RNVC: 2

30 Jul 2004

5120-12-389-5059
Torque Wrench Adapter

123895059
R819949: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-183-5595
Gegenhalter

121835595
1X56136864: RNCC: 3 | RNVC: 2
8209818: RNCC: 5 | RNVC: 2
8470740: RNCC: 5 | RNVC: 2

29 Apr 1980

5120-12-347-2664
Piston Ring Compressor

123472664
57406-645: RNCC: 3 | RNVC: 2

18 Nov 1998

5120-12-186-7343
Aufpreszvorrichtung

121867343
99346003: RNCC: 3 | RNVC: 2
410332: RNCC: 5 | RNVC: 9
410332: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-090-1792

5120-12-312-1039
Spatula

123121039
3157A: RNCC: 3 | RNVC: 9

20 Nov 1987

5120-12-334-5212
Mechanical Puller Attachment

123345212
0852 0678.008: RNCC: 3 | RNVC: 2

19 May 1994

5120-12-388-5962
Socket Wrench Screwdriver Attachment

123885962
8801-4: RNCC: 3 | RNVC: 2
4000896039371: RNCC: 5 | RNVC: 2

3 Apr 2012

5120-12-330-3652
Bearing And Bushing Inserter

123303652
2653-990980.04: RNCC: 2 | RNVC: 2
2653-990980.04: RNCC: 3 | RNVC: 2

8 Dec 1992

5120-12-194-4889
Aufnahme- Flansch

121944889
5800640665: RNCC: 3 | RNVC: 2

9 Nov 1982

5120-12-365-9169
Swivel Knob Jeweler's Screwdriver

123659169
T4882X 12: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-358-8660
Mechanical Puller

123588660
80996010099: RNCC: 3 | RNVC: 2

22 Nov 2002

5120-12-139-8572

5120-12-129-8792
Stempel

121298792
1683102003: RNCC: 3 | RNVC: 2
EF2717: RNCC: 5 | RNVC: 2
KDAL5496: RNCC: 5 | RNVC: 9
1683102003: RNCC: 5 | RNVC: 9
EF2717: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-385-3691
Gas Torch

123853691
588268-62: RNCC: 3 | RNVC: 2

27 May 2011

5120-12-340-0591
Dreh Haltewerkzeug

123400591
BHAB029: RNCC: 3 | RNVC: 2

22 Feb 1996

5120-12-324-3694
Mechanical Puller

123243694
602589003300: RNCC: 3 | RNVC: 2

8 Feb 1991

5120-12-387-3315
Inspection Mirror

123873315
249036: RNCC: 3 | RNVC: 2

29 Nov 2011

5120-12-365-9173
Swivel Knob Jeweler's Screwdriver

123659173
T4873X 15: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-333-5902
Spanner Wrench

123335902
VP15.04.44: RNCC: 3 | RNVC: 2
VP15.04.44: RNCC: 5 | RNVC: 9

11 Jan 1994

5120-12-328-6473
Hand Tube Flaring Punch

123286473
F30373980: RNCC: 3 | RNVC: 2

11 Jun 1992

5120-12-359-4957
Nietzugst Fuehrung

123594957
7202326: RNCC: 3 | RNVC: 2
7202326: RNCC: 5 | RNVC: 2

11 Feb 2003

5120-12-371-2520
Plier Clamp

123712520
8603180: RNCC: 3 | RNVC: 2
00.13.16.55: RNCC: 5 | RNVC: 2
4003773028260: RNCC: 5 | RNVC: 2

6 Mar 2007

5120-12-023-0166

5120-12-090-4777

5120-12-190-2276
Mechanical Puller

121902276
99346220: RNCC: 3 | RNVC: 2
99346220: RNCC: 5 | RNVC: 2
530050: RNCC: 5 | RNVC: 9
530050: RNCC: 5 | RNVC: 9

12 Nov 1981

5120-12-354-3435
Flat Tip Screwdriver

123543435
LSA10220: RNCC: 3 | RNVC: 2
111341: RNCC: 5 | RNVC: 2

4 Jul 2001

5120-12-377-1179
Quick Adjusting Screw Clamp

123771179
STB60M: RNCC: 3 | RNVC: 2

11 Dec 2008

5120-12-197-9755
Schluesseleinsatz

121979755
629600-0-11: RNCC: 3 | RNVC: 2
26834: RNCC: 3 | RNVC: 2
62960-0-11: RNCC: 5 | RNVC: 2

7 Dec 1983

5120-12-196-7053
Aligning Punch

121967053
4900059-751710.000.0: RNCC: 2 | RNVC: 2
4900059-751710.000.0: RNCC: 3 | RNVC: 2
4900059-751710-000-0: RNCC: 5 | RNVC: 2
4900059-751710.000.0: RNCC: 5 | RNVC: 2

4 Aug 1983

5120-12-123-5098

5120-12-172-5293
Spanner Wrench

121725293
773430: RNCC: 3 | RNVC: 9

23 Jan 1978

5120-12-194-0815
Torque Wrench Adapter

121940815
TL5120-0086-310: RNCC: 2 | RNVC: 2
20/DCA-27: RNCC: 5 | RNVC: 9
6264110008: RNCC: 5 | RNVC: 9
6450D-27: RNCC: 5 | RNVC: 9
731/40 27: RNCC: 5 | RNVC: 9
7852-7 27: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-362-5422
Solid Center Punch

123625422
54.0084.960.74: RNCC: 3 | RNVC: 2
3643-150: RNCC: 5 | RNVC: 2

5 Mar 2004

5120-12-187-9660
Face Spanner Wrench Socket

121879660
3S50383-0000: RNCC: 3 | RNVC: 2

20 May 1981

5120-12-309-6552
Spanner Wrench

123096552
335927-9007.000: RNCC: 3 | RNVC: 2
33 59 27-9007.000: RNCC: 5 | RNVC: 9
335927-9007-000: RNCC: 5 | RNVC: 9
335927-9007.000: RNCC: 5 | RNVC: 9

13 Feb 1987

5120-12-344-1828
Schraubst Aufnahme

123441828
HEUERLIFT100MM: RNCC: 3 | RNVC: 2
HEUERLIFT100MM: RNCC: 5 | RNVC: 9

23 Sep 1997

5120-12-369-1098
Seal Inserter

123691098
0986613243: RNCC: 3 | RNVC: 2

23 May 2006

5120-12-094-1298

5120-12-332-6023
Pliers

123326023
NO PRIMARY REF 12-332-6023: RNCC: 3 | RNVC: 2
10658-215CI: RNCC: 5 | RNVC: 9

26 Aug 1993

5120-12-318-0437
Capstan Bar

123180437
KS734-200: RNCC: 3 | RNVC: 2
KS734-200: RNCC: 5 | RNVC: 9

7 Jun 1989

5120-12-173-0527
Pliers

121730527
2692B: RNCC: 3 | RNVC: 9
671169: RNCC: 3 | RNVC: 9
DIN5258-A140: RNCC: 4 | RNVC: 1
106680: RNCC: 5 | RNVC: 2
A140DIN5258: RNCC: 5 | RNVC: 9

15 Mar 1978

5120-12-332-6135
Spanner Wrench

123326135
532117-8071.905: RNCC: 3 | RNVC: 2
532117-8071.905: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-194-7768
Seal Inserter

121947768
000 941 92 61: RNCC: 3 | RNVC: 2
0009419261: RNCC: 3 | RNVC: 2

6 Dec 1982

5120-12-341-1595
Screwdriver Bit

123411595
ITX20-T30: RNCC: 3 | RNVC: 2

2 Aug 1996

5120-12-336-5872
Montierdorn

123365872
0851 6795: RNCC: 3 | RNVC: 2
8516795: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-368-8157
Pliers

123688157
65307160-TCS: RNCC: 3 | RNVC: 2

24 Apr 2006

5120-12-386-4985
Torque Wrench

123864985
25KLI2011: RNCC: 3 | RNVC: 2

6 Sep 2011

5120-12-320-7679
Seal Inserter

123207679
62254800: RNCC: 3 | RNVC: 2

14 Feb 1990

5120-12-359-6706
Mechanical Puller

123596706
T623P3001120: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-339-6001
Socket Wrench

123396001
80996030158: RNCC: 3 | RNVC: 2

11 Dec 1995

5120-12-156-1529
Drive Pin Punch

121561529
NM350-12: RNCC: 3 | RNVC: 2
NM350-12: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-7324
Druckstueck

121767324
VG95211-ML-121767324: RNCC: 2 | RNVC: 2
105-21832W1.19: RNCC: 3 | RNVC: 2
105-21832W1-19: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-314-6496
Lining Bar

123146496
F11.49049-0290: RNCC: 3 | RNVC: 2

26 Jul 1988

5120-12-127-3804
Schluessel

121273804
83.09150-5000: RNCC: 3 | RNVC: 2
83091505000: RNCC: 3 | RNVC: 2
91113501642: RNCC: 5 | RNVC: 2
91.11350-1642: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-362-3258
Torque Wrench Adapter

123623258
2446-STT 2800: RNCC: 3 | RNVC: 2
2446-STT 2800: RNCC: 5 | RNVC: 2

6 Feb 2004

5120-12-328-1156
Screw Thread Insert Tang Breakoff Tool

123281156
01586250000: RNCC: 3 | RNVC: 2

8 Apr 1992

5120-12-184-7327
Oelfilt Schluessel

121847327
CF447260BX: RNCC: 3 | RNVC: 2
CF 447 260 BX: RNCC: 5 | RNVC: 2
CF447260BX: RNCC: 5 | RNVC: 2
CF 447 260 BX: RNCC: 5 | RNVC: 2

14 Aug 1980

5120-12-177-2967
Combination Box And Open End Wrench

121772967
13-27: RNCC: 3 | RNVC: 2
40082727: RNCC: 5 | RNVC: 2

24 Jan 1979

5120-12-374-6489
Pull And Press Tool

123746489
F0099976: RNCC: 3 | RNVC: 2

4 Mar 2008

5120-12-146-7422

5120-12-151-6593
Geh Nietvorrichtung

121516593
WKW9009-0102V135: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-359-6690
Torque Handle

123596690
AS565-1817A-04: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-384-7678
Bearing And Bushing Inserter And Remover

123847678
F0094969: RNCC: 3 | RNVC: 2

28 Mar 2011

5120-12-343-8659
Socket Wrench Set

123438659
K530-12M: RNCC: 3 | RNVC: 2
00530947082: RNCC: 5 | RNVC: 2

7 Aug 1997

5120-12-133-3611
Open End Wrench

121333611
NO PRIMARY REF 12-133-3611: RNCC: 3 | RNVC: 2
105820: RNCC: 5 | RNVC: 9
1953M27X32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-346-5802
Schluessel

123465802
41121-T604: RNCC: 3 | RNVC: 2

12 Aug 1998

5120-12-373-7693
Bearing And Bushing Inserter

123737693
F30274819: RNCC: 3 | RNVC: 2

5 Dec 2007

5120-12-373-2138
Hand Scissors Jack

123732138
7H0011031D: RNCC: 3 | RNVC: 2

10 Oct 2007

5120-12-021-4714

5120-12-124-1836

5120-12-321-2018
Ge Montierwerkzeug

123212018
F6376569: RNCC: 3 | RNVC: 2
F601021376569: RNCC: 5 | RNVC: 2

17 Apr 1990

5120-12-181-1567
Pliers

121811567
3531115: RNCC: 3 | RNVC: 2
135CF: RNCC: 5 | RNVC: 2
3531: RNCC: 5 | RNVC: 2
2726AB: RNCC: 5 | RNVC: 9

29 Oct 1979

5120-12-330-2781
We Montierwerkzeug

123302781
2653-990140.00: RNCC: 2 | RNVC: 2
2653-990140.00: RNCC: 3 | RNVC: 2

26 Nov 1992

5120-12-123-5841
Socket Wrench Socket

121235841
DIN3124-S46X20L: RNCC: 2 | RNVC: 2
S46X20LDIN3124: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-3095

5120-12-129-9730

5120-12-153-1626
Socket Wrench

121531626
282-703-180-010: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-187-6460
Socket Wrench

121876460
1012001400: RNCC: 3 | RNVC: 2
1012001400: RNCC: 5 | RNVC: 2
AS14: RNCC: 5 | RNVC: 2

22 Apr 1981

5120-12-171-2824
Einpreszwerkzeug

121712824
105-31821W3: RNCC: 3 | RNVC: 2

26 Sep 1977

5120-12-309-7966
Socket Wrench

123097966
74002-802: RNCC: 3 | RNVC: 2

3 Mar 1987

5120-12-391-8568
Pipe Mounting Tool

123918568
RTMT0-02-14: RNCC: 3 | RNVC: 2

12 Apr 2013

5120-12-120-5518
Rack Bar Jack

121205518
DIN7355-A10: RNCC: 2 | RNVC: 2
0830038: RNCC: 3 | RNVC: 2
010: RNCC: 5 | RNVC: 2
A10DIN7355: RNCC: 5 | RNVC: 2
301-10: RNCC: 5 | RNVC: 9
10DIN7356: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-182-4225
Spanner Wrench

121824225
RM5172: RNCC: 3 | RNVC: 2
RM5172: RNCC: 5 | RNVC: 9

30 Jan 1980

5120-12-162-2323
Lamp Extractor

121622323
1066: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-130-7321
Cross Tip Screwdriver

121307321
JD5120-12-130-7321: RNCC: 3 | RNVC: 2
PR103: RNCC: 3 | RNVC: 2
1410-3C: RNCC: 5 | RNVC: 2
131750: RNCC: 5 | RNVC: 9
778RUP3: RNCC: 5 | RNVC: 9
778RUPB3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-315-3201
Hyd Ausbauwerkzeug

123153201
4900153-31310-00-04: RNCC: 3 | RNVC: 2
4900153-31310-04: RNCC: 5 | RNVC: 2

12 Oct 1988

5120-12-374-9300
Mecha Ejector Tool

123749300
1513: RNCC: 3 | RNVC: 2
4018754049509: RNCC: 5 | RNVC: 2
78600003: RNCC: 5 | RNVC: 2

8 Apr 2008

5120-12-382-2066
Machinist's Vise

123822066
10807: RNCC: 3 | RNVC: 2
10807: RNCC: 5 | RNVC: 9

20 May 2010

5120-12-177-6288
Grommet Inserting Punch And Die

121776288
8886: RNCC: 3 | RNVC: 9

9 Feb 1979

5120-12-121-6988

5120-12-091-7161

5120-12-368-4329
Offset Screwdriver

123684329
43270040-TCS: RNCC: 3 | RNVC: 2

9 Mar 2006

5120-12-191-6317
Karte Auszieher

121916317
54-2710-901-30: RNCC: 3 | RNVC: 2
54.2710.901-30: RNCC: 3 | RNVC: 2

17 Feb 1982

5120-12-377-1115
Mechanical Puller

123771115
12614-3: RNCC: 3 | RNVC: 2
71040013: RNCC: 5 | RNVC: 2

11 Dec 2008

5120-12-355-3192
Drive Pin Punch

123553192
4909777: RNCC: 3 | RNVC: 2
6503.201.10.01.003: RNCC: 5 | RNVC: 2

31 Oct 2001

5120-12-159-5796
Spanner Wrench

121595796
3125890307: RNCC: 3 | RNVC: 2
312589030700: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-363-2371
Socket Wrench Adapter

123632371
F30378301: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-372-7905
Werkst Druckstueck

123727905
X067293.06: RNCC: 3 | RNVC: 2

22 Aug 2007

5120-12-313-4261
Mechanisc Aufnahme

123134261
80996090009: RNCC: 3 | RNVC: 2
80.99609.0009: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-314-2433
Slip Joint Pliers

123142433
8805250: RNCC: 3 | RNVC: 2
1121205T00: RNCC: 5 | RNVC: 2
2320B: RNCC: 5 | RNVC: 9

21 Jun 1988

5120-12-325-6656
Screwdriver Bit

123256656
5105.020.03.05: RNCC: 3 | RNVC: 2
7820353135: RNCC: 5 | RNVC: 2
78203 53135: RNCC: 5 | RNVC: 9

27 Jun 1991

5120-12-305-3291
Ku Montierwerkzeug

123053291
S000676110100000: RNCC: 3 | RNVC: 2
0676110100: RNCC: 3 | RNVC: 2

23 Oct 1985

5120-12-368-1983
Socket Wrench Socket

123681983
01530018-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-197-2859

5120-12-182-3382
Claw Bar

121823382
46D60: RNCC: 3 | RNVC: 2
2055B600: RNCC: 3 | RNVC: 9

25 Jan 1980

5120-12-193-6674

5120-12-147-9927
Mechanical Puller

121479927
23176-264190-00-0: RNCC: 2 | RNVC: 2
23176-264190.00.0: RNCC: 2 | RNVC: 2
23176-264190-00-0: RNCC: 5 | RNVC: 2
23176-264190.00.0: RNCC: 5 | RNVC: 2
23176-264190-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-158-7240
Spanner Wrench

121587240
414M07: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-010-5226

5120-12-150-4295
Face Spanner Wrench Socket

121504295
837589040700: RNCC: 3 | RNVC: 2
8375890407: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-345-3291
Ratchet Wrench

123453291
8691840024: RNCC: 3 | RNVC: 2
8691840024: RNCC: 5 | RNVC: 2
8691840024: RNCC: 5 | RNVC: 2
869 184 00 09: RNCC: 5 | RNVC: 9

3 Mar 1998

5120-12-127-2806
Schluessel

121272806
WU65: RNCC: 3 | RNVC: 2
WU65: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-330-3464
Mechanical Puller

123303464
2653-990970.00: RNCC: 2 | RNVC: 2
2653-990970.00: RNCC: 3 | RNVC: 2

4 Dec 1992

5120-12-366-2088
Socket Wrench Extension

123662088
CBD32574G01: RNCC: 3 | RNVC: 2

22 Mar 2005

5120-12-171-8504
Box Wrench

121718504
DIN897-10X11: RNCC: 2 | RNVC: 2
23-10X11: RNCC: 3 | RNVC: 2
220-CS-10X11: RNCC: 5 | RNVC: 9
237728: RNCC: 5 | RNVC: 9
10X11DIN897: RNCC: 5 | RNVC: 9

22 Nov 1977

5120-12-193-9167
Torque Wrench

121939167
NO PRIMARY REF 12-193-9167: RNCC: 3 | RNVC: 2
73NMV/25: RNCC: 5 | RNVC: 9

13 Sep 1982

5120-12-189-8177
Torque Wrench Adapter

121898177
2300109-990940.002.0: RNCC: 2 | RNVC: 2
2300109-990940.002.0: RNCC: 3 | RNVC: 2
2300109-990940.002.0: RNCC: 3 | RNVC: 2
2300109-990940-002-0: RNCC: 5 | RNVC: 2

21 Oct 1981

5120-12-132-1097

5120-12-383-3120
Montierwer Einsatz

123833120
000-090: RNCC: 3 | RNVC: 2

6 Oct 2010

5120-12-385-6082
Socket Wrench Socket

123856082
F30501743: RNCC: 3 | RNVC: 2

21 Jun 2011

5120-12-324-4453
Vise Jaw Caps

123244453
100227-97200: RNCC: 2 | RNVC: 2
100227-97200: RNCC: 3 | RNVC: 2

18 Feb 1991

5120-12-132-4285

5120-12-388-6209
Socket Wrench Socket

123886209
880LG-15: RNCC: 3 | RNVC: 2
4000896040766: RNCC: 5 | RNVC: 2

4 Apr 2012

5120-12-173-6544
Spanner Wrench

121736544
15091-08000W9: RNCC: 3 | RNVC: 2
15091-08000W9: RNCC: 5 | RNVC: 9

26 Apr 1978

5120-12-309-8158
Spanner Wrench

123098158
001-218.002-000W2: RNCC: 2 | RNVC: 2
001-218.002-000W2: RNCC: 3 | RNVC: 2

6 Mar 1987

5120-12-313-7078
Tire Iron

123137078
NO PRIMARY REF 12-313-7078: RNCC: 3 | RNVC: 2
38A20C: RNCC: 5 | RNVC: 9

27 Apr 1988

5120-12-171-7729
Open End Wrench

121717729
DIN7446-10: RNCC: 2 | RNVC: 9
151310: RNCC: 3 | RNVC: 2
1447867: RNCC: 5 | RNVC: 2
1953VDE10: RNCC: 5 | RNVC: 9

11 Nov 1977

5120-12-124-2242
Gasoline Blowtorch

121242242
NO PRIMARY REF 12-124-2242: RNCC: 3 | RNVC: 2
522: RNCC: 5 | RNVC: 9
SA1-24DIN8502MS: RNCC: 5 | RNVC: 9
611C007-1BENZIN: RNCC: 5 | RNVC: 9
5120-90050: RNCC: 6 | RNVC: 9
5120-90050: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-330-9883
Seal Inserter

123309883
VW 2003-2A: RNCC: 3 | RNVC: 2
2003/2A: RNCC: 3 | RNVC: 2

8 Mar 1993

5120-12-123-5362
Socket Wrench

121235362
DIN659-24: RNCC: 2 | RNVC: 2
1070-24: RNCC: 3 | RNVC: 2
24DIN659: RNCC: 3 | RNVC: 2
40352: RNCC: 3 | RNVC: 2
24DIN659: RNCC: 5 | RNVC: 2
5168K24: RNCC: 5 | RNVC: 9
24DIN659GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-342-8417
Brake Shoe Adjusting Tool

123428417
18 910 1102: RNCC: 3 | RNVC: 2

9 Apr 1997

5120-12-131-2840
Mechanical Puller

121312840
631: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-363-8419
Bearing And Bushing Inserter

123638419
T671P5001221: RNCC: 3 | RNVC: 2

30 Jul 2004

Load More Results