What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 30 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 30 of 62

5120-12-317-4353
Open End Wrench

123174353
4200266: RNCC: 3 | RNVC: 2

6 Apr 1989

5120-12-309-1911
Hydrau Druckstueck

123091911
19864: RNCC: 3 | RNVC: 2
19864: RNCC: 3 | RNVC: 2

19 Dec 1986

5120-12-147-4322
Einbauwerkz Spindel

121474322
01500612020: RNCC: 3 | RNVC: 2
UD112: RNCC: 5 | RNVC: 9
01556120010: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-1560
Socket Wrench Handle

121561560
NM298: RNCC: 3 | RNVC: 2
NM298: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-362-5506
Socket Wrench

123625506
463 589 00 07 00: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-12-382-7468
Socket Head Screw Key

123827468
73101003-TCS: RNCC: 3 | RNVC: 2

4 Aug 2010

5120-12-175-5949
Torque Wrench

121755949
NO PRIMARY REF 12-175-5949: RNCC: 3 | RNVC: 2
73NMR36: RNCC: 5 | RNVC: 9
96502636: RNCC: 5 | RNVC: 9

3 Oct 1978

5120-12-371-4323
Mechanical Puller Adapter

123714323
80996020197: RNCC: 3 | RNVC: 2
80.99602-0197: RNCC: 5 | RNVC: 2

28 Mar 2007

5120-12-375-7635
Craftsman's Tweezers

123757635
5-054: RNCC: 3 | RNVC: 2

2 Jul 2008

5120-12-182-4206
Abzieher

121824206
VW637-2: RNCC: 3 | RNVC: 9

30 Jan 1980

5120-12-050-4074

5120-12-361-6953
Hand Terminal Crimping Tool

123616953
56165.106.752: RNCC: 3 | RNVC: 2
56165.106.752: RNCC: 5 | RNVC: 2
AZ752: RNCC: 5 | RNVC: 2

4 Nov 2003

5120-12-177-3665
Abzieher Buchse

121773665
1476014010: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-158-7239
Spanner Wrench

121587239
414M06: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-044-5033

5120-12-168-6696

5120-12-163-1224
Socket Wrench Socket

121631224
VG95211-ML-121631224: RNCC: 2 | RNVC: 2
40AD1/4: RNCC: 3 | RNVC: 2
A6700DZ-1/4: RNCC: 3 | RNVC: 2
01530016: RNCC: 5 | RNVC: 2
175137: RNCC: 5 | RNVC: 2
6700DZ1-4IN: RNCC: 5 | RNVC: 9
133268: RNCC: 5 | RNVC: 9
6700DZ1-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-4983
Screw Thread Insert Extractor

121994983
SRM 0610 R: RNCC: 3 | RNVC: 9

3 May 1984

5120-12-311-5443
Spanner Wrench

123115443
272.346 244: RNCC: 2 | RNVC: 2
272.346 244: RNCC: 3 | RNVC: 2

16 Sep 1987

5120-12-194-9818
Mechanical Puller Attachment

121949818
1X56136343: RNCC: 3 | RNVC: 2

23 Dec 1982

5120-12-127-3943

5120-12-129-5867

5120-12-092-2886

5120-12-308-1622
Gew Spann- Huelse

123081622
01500608332: RNCC: 3 | RNVC: 2
0150 0608 332: RNCC: 5 | RNVC: 2

9 Sep 1986

5120-12-181-6877
Abziehv Druckstueck

121816877
VW203D: RNCC: 3 | RNVC: 9

10 Dec 1979

5120-12-314-9225
Ratchet Wrench

123149225
31KVR30: RNCC: 3 | RNVC: 2
626848: RNCC: 5 | RNVC: 2

26 Aug 1988

5120-12-164-3435
Halter

121643435
F6144892: RNCC: 3 | RNVC: 2
F623501144892: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-330-5533
Stud Inserter

123305533
0851 0474: RNCC: 3 | RNVC: 2
8510474: RNCC: 5 | RNVC: 2

8 Jan 1993

5120-12-331-0215
Aligning Punch

123310215
8531994-1: RNCC: 3 | RNVC: 2

12 Mar 1993

5120-12-133-3839
Socket Wrench Socket

121333839
A7402DZ-3/8: RNCC: 3 | RNVC: 2
46A3-8: RNCC: 3 | RNVC: 2
176036: RNCC: 5 | RNVC: 2
880TAZ3-8: RNCC: 5 | RNVC: 2
02420024: RNCC: 5 | RNVC: 2
109345: RNCC: 5 | RNVC: 9
7402DZ3-8: RNCC: 5 | RNVC: 9
09880: RNCC: 5 | RNVC: 9
2386120029: RNCC: 5 | RNVC: 9
880TAZ-3/8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-363-8862
Bearing And Bushing Inserter

123638862
T670P5001227: RNCC: 3 | RNVC: 2

3 Aug 2004

5120-12-123-4995

5120-12-181-8135
Fuehrungshuelse

121818135
VW428A: RNCC: 3 | RNVC: 9

17 Dec 1979

5120-12-324-3867
Seal Inserter

123243867
111589084300: RNCC: 3 | RNVC: 2
601589034300: RNCC: 5 | RNVC: 9

12 Feb 1991

5120-12-181-2301
Schluessel

121812301
403589012100: RNCC: 3 | RNVC: 2

5 Nov 1979

5120-12-358-8979
Bearing And Bushing Inserter

123588979
83091440178: RNCC: 3 | RNVC: 2

26 Nov 2002

5120-12-198-0212
Montierhuelse

121980212
105-45041W18: RNCC: 3 | RNVC: 2

12 Dec 1983

5120-12-126-3074

5120-12-147-4325
Ei Vorspann- Huelse

121474325
01500608032: RNCC: 3 | RNVC: 2
01556080021: RNCC: 5 | RNVC: 9
UV108: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-358-1998
Socket Wrench Set

123581998
96593434: RNCC: 3 | RNVC: 2
965 934 34: RNCC: 5 | RNVC: 2

25 Sep 2002

5120-12-375-2914
Socket Wrench Adapter

123752914
20040: RNCC: 3 | RNVC: 2
246 03: RNCC: 3 | RNVC: 9
246 03: RNCC: 5 | RNVC: 2
246 03: RNCC: 5 | RNVC: 9

15 May 2008

5120-12-190-0763
Drive Pin Punch

121900763
66935000: RNCC: 3 | RNVC: 2
669 350 00: RNCC: 5 | RNVC: 9

5 Nov 1981

5120-12-306-0079
Socket Wrench Set

123060079
900AZ: RNCC: 3 | RNVC: 2

20 Jan 1986

5120-12-370-7860
Mechan Druckstueck

123707860
5176338: RNCC: 3 | RNVC: 2

20 Dec 2006

5120-12-182-4198
Fuehrungsstueck

121824198
VW437A: RNCC: 3 | RNVC: 9

30 Jan 1980

5120-12-023-1387

5120-12-041-2664

5120-12-344-1361
Socket Wrench

123441361
201.0390.00098: RNCC: 3 | RNVC: 2
1260640024: RNCC: 5 | RNVC: 2
0110606280000: RNCC: 5 | RNVC: 2
ASC1375880: RNCC: 5 | RNVC: 9

17 Sep 1997

5120-12-309-2606
Ge Montierwerkzeug

123092606
1X56 137 362: RNCC: 3 | RNVC: 2
1X56137362: RNCC: 5 | RNVC: 2

7 Jan 1987

5120-12-387-2607
Installation And Re

123872607
030.313: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-12-364-6797
Socket Wrench Socket

123646797
03010030-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-328-2961
Mechanical Puller Step Plate

123282961
116589056300: RNCC: 3 | RNVC: 2
116 589 05 63 00: RNCC: 5 | RNVC: 2

5 May 1992

5120-12-198-6370
Mechanical Puller

121986370
5870000070: RNCC: 3 | RNVC: 2
026042: RNCC: 5 | RNVC: 2
5870000028: RNCC: 5 | RNVC: 9
5870000070: RNCC: 5 | RNVC: 9

15 Feb 1984

5120-12-394-3905
Combination Box And Open End Wrench Set

123943905
H02.030551: RNCC: 3 | RNVC: 2

27 Nov 2013

5120-12-351-9587

5120-12-183-4699
Abzi Einsatzstueck

121834699
1X56122232-4: RNCC: 3 | RNVC: 2

22 Apr 1980

5120-12-382-8537
Open End Wrench

123828537
3.2073: RNCC: 3 | RNVC: 2

17 Aug 2010

5120-12-392-6817
Mechanical Puller

123926817
CTP41012G001: RNCC: 3 | RNVC: 2

27 Jun 2013

5120-12-177-3654
Montagevorrichtung

121773654
0276131000: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-336-6130
Cross Tip Screwdriver

123366130
153-2X350: RNCC: 3 | RNVC: 2

30 Nov 1994

5120-12-185-8348
Screwdriver Bit

121858348
4091720: RNCC: 3 | RNVC: 9

1 Nov 1980

5120-12-339-6002
Spanner Wrench

123396002
80996060310: RNCC: 3 | RNVC: 2

11 Dec 1995

5120-12-023-1512

5120-12-392-9165
Stud Remover Set

123929165
53: RNCC: 3 | RNVC: 2
4021176342233: RNCC: 5 | RNVC: 2

23 Jul 2013

5120-12-131-4942
Mechanical Puller

121314942
018M01400: RNCC: 3 | RNVC: 2
244010: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-196-4629

5120-12-365-9145
Socket Head Screw Key

123659145
T4834 1: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-366-6256
W Spannvorrichtung

123666256
1000042-196600.02: RNCC: 3 | RNVC: 2

17 May 2005

5120-12-380-2342
Mechanical Puller

123802342
0986611246: RNCC: 3 | RNVC: 2
0 986 611 246: RNCC: 5 | RNVC: 2

8 Oct 2009

5120-12-370-9455
Socket Head Screw Key Set

123709455
181-626: RNCC: 3 | RNVC: 2

18 Jan 2007

5120-12-331-6987
Socket Wrench

123316987
191012219C: RNCC: 3 | RNVC: 2

8 Jun 1993

5120-12-326-9490
Spanner Wrench

123269490
8524619: RNCC: 3 | RNVC: 2

13 Nov 1991

5120-12-197-2908
Face Spanner Wrench Socket

121972908
F3 6266 0140080: RNCC: 3 | RNVC: 2
F362660140080: RNCC: 5 | RNVC: 2

10 Oct 1983

5120-12-317-4014
Aligning Punch

123174014
2300279-7110.01: RNCC: 2 | RNVC: 2
2300279-7110.01: RNCC: 3 | RNVC: 2
9874851: RNCC: 5 | RNVC: 2
2300279-7110.01: RNCC: 5 | RNVC: 9
9874851: RNCC: 5 | RNVC: 9

5 Apr 1989

5120-12-389-7289
Pliers

123897289
38 91 200: RNCC: 3 | RNVC: 2
4003773017219: RNCC: 5 | RNVC: 2

17 Aug 2012

5120-12-092-2254

5120-12-344-7922
Drift Punch

123447922
99365063: RNCC: 3 | RNVC: 2

9 Dec 1997

5120-12-188-1691
Hand Terminal Crimping Tool

121881691
FA0000: RNCC: 3 | RNVC: 2
FA0000: RNCC: 5 | RNVC: 9

10 Jun 1981

5120-12-146-0127
Open End Wrench

121460127
5072700: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-182-5273
Montagevorrichtung

121825273
68100000L5: RNCC: 3 | RNVC: 9

8 Feb 1980

5120-12-315-4120
Socket Wrench

123154120
03.364.24.02.0: RNCC: 3 | RNVC: 2
8.454.609.000: RNCC: 5 | RNVC: 2

20 Oct 1988

5120-12-390-6931
Mater Saug- Griff

123906931
6390790: RNCC: 3 | RNVC: 2
7112343: RNCC: 5 | RNVC: 2
4010886639078: RNCC: 5 | RNVC: 2
121-3: RNCC: 5 | RNVC: 2
4010886639078: RNCC: 5 | RNVC: 2
6390790: RNCC: 5 | RNVC: 2
121-3: RNCC: 5 | RNVC: 2

4 Dec 2012

5120-12-348-0626
Electrical Contact Inserter And Remover

123480626
97E9.902-1: RNCC: 3 | RNVC: 2

7 Apr 1999

5120-12-182-4191
Betaetigungsschiebe

121824191
VW553: RNCC: 3 | RNVC: 9

30 Jan 1980

5120-12-327-1104
Hand Beading Tool

123271104
15374803: RNCC: 3 | RNVC: 2
153 748 03: RNCC: 5 | RNVC: 2

3 Dec 1991

5120-12-359-2980
Montierdorn

123592980
054 276: RNCC: 3 | RNVC: 2

21 Jan 2003

5120-12-371-4171
Mechanical Puller

123714171
VM74512: RNCC: 3 | RNVC: 2

27 Mar 2007

5120-12-161-5484
Hand Tube Bender

121615484
6-2829R: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-363-2374
Socket Wrench

123632374
F30377662: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-387-7066
Installation And Re

123877066
F6782353: RNCC: 3 | RNVC: 2

25 Jan 2012

5120-12-134-2734

5120-12-179-7519
Verstellvorrichtung

121797519
10325: RNCC: 3 | RNVC: 2
10325: RNCC: 5 | RNVC: 9
5120-90302: RNCC: 6 | RNVC: 9

25 Jul 1979

5120-12-328-6968
Bearing And Bushing Inserter And Remover

123286968
F6345878: RNCC: 3 | RNVC: 2

16 Jun 1992

5120-12-311-7339
Bearing And Bushing Inserter

123117339
80996170016: RNCC: 3 | RNVC: 2
80.99617.0016: RNCC: 5 | RNVC: 2

13 Oct 1987

5120-12-140-9688
Schutzhuelse

121409688
0276156000: RNCC: 3 | RNVC: 2
0277070000: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-364-9565
Swivel Knob Jeweler's Screwdriver

123649565
T4882XESD000X60: RNCC: 3 | RNVC: 2

18 Nov 2004

5120-12-124-2715
Digging Bar

30 May 1969

5120-12-196-1045
Spanner Wrench

121961045
200791: RNCC: 3 | RNVC: 2
953.039: RNCC: 5 | RNVC: 2
953039: RNCC: 5 | RNVC: 2

30 May 1983

5120-12-327-8337
Drive Pin Punch

123278337
3639D: RNCC: 3 | RNVC: 2
107446: RNCC: 5 | RNVC: 2

11 Mar 1992

5120-12-388-6980
Socket Wrench Socket

123886980
02120036: RNCC: 3 | RNVC: 2
4018754003204: RNCC: 5 | RNVC: 2

16 Apr 2012

5120-12-091-4767

5120-12-350-4800
Hand Hydraulic Jack

123504800
RH0501A0A0A01: RNCC: 3 | RNVC: 2

4 Apr 2000

5120-12-361-2002
Socket Head Screw Key

123612002
CBD45093P01: RNCC: 3 | RNVC: 2

3 Sep 2003

5120-12-126-4675
Electronic Equipment Alignment Tool

121264675
5506: RNCC: 3 | RNVC: 2
108685: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-5275
Hand Hammer

121265275
574A314-60: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-372-7581
Leveling-Support Jack

123727581
540575: RNCC: 3 | RNVC: 2

17 Aug 2007

5120-12-170-8653
Spanner Wrench

121708653
250532: RNCC: 3 | RNVC: 2

17 Aug 1977

5120-12-347-4391
Crimping Tool Die

123474391
C25: RNCC: 3 | RNVC: 2

10 Dec 1998

5120-12-022-6863

5120-12-364-7222
W Spannvorrichtung

123647222
5583592: RNCC: 3 | RNVC: 2
5583592: RNCC: 8 | RNVC: 2
(241)A42495583592: RNCC: 8 | RNVC: 2

22 Oct 2004

5120-12-023-3276

5120-12-144-6126
Spanner Wrench

121446126
GF177017: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-354-1940
Ku Montierwerkzeug

123541940
189109301: RNCC: 2 | RNVC: 2
189109301: RNCC: 3 | RNVC: 2

19 Jun 2001

5120-12-350-2577
Bl Ausbeulwerkzeug

123502577
042: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-183-6924
Spanner Wrench

121836924
1000042-195110: RNCC: 3 | RNVC: 2

13 May 1980

5120-12-330-0047
Mechanical Puller Attachment

123300047
0852 3424.007: RNCC: 3 | RNVC: 2
8523424.007: RNCC: 5 | RNVC: 2

21 Oct 1992

5120-12-132-2727
Kurbelwe Haltebock

121322727
VW310A: RNCC: 3 | RNVC: 2
VW310A: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-307-5107
Hand Helical Spring Puller Hook

123075107
116589016200: RNCC: 3 | RNVC: 2

25 Jun 1986

5120-12-123-5356

5120-12-094-1221

5120-12-325-6657
Spanner Wrench

123256657
5105.020.05.01: RNCC: 3 | RNVC: 2
7820353136: RNCC: 5 | RNVC: 2
78203 53136: RNCC: 5 | RNVC: 9

27 Jun 1991

5120-12-183-0940
Dorn

121830940
4199039: RNCC: 3 | RNVC: 2

20 Mar 1980

5120-12-384-8595
Saddler's Harness Awl Blade

123848595
50.000.010: RNCC: 3 | RNVC: 2

5 Apr 2011

5120-12-301-1322
Spanner Wrench

123011322
WL46-1: RNCC: 3 | RNVC: 2
83.09166.0004: RNCC: 5 | RNVC: 2
83091660004: RNCC: 5 | RNVC: 2

22 Sep 1984

5120-12-375-7483
Craftsman's Tweezers

123757483
5-031: RNCC: 3 | RNVC: 2

1 Jul 2008

5120-12-174-5483
Torque Wrench Adapter

121745483
4900067: RNCC: 2 | RNVC: 2

10 Jul 1978

5120-12-172-6492
Dorn

121726492
7672798051: RNCC: 3 | RNVC: 2
0535882: RNCC: 5 | RNVC: 2
535882: RNCC: 5 | RNVC: 9

3 Feb 1978

5120-12-139-3037

5120-12-385-3679
Mechanical Puller Attachment

123853679
F6347342: RNCC: 3 | RNVC: 2

27 May 2011

5120-12-349-4723
Bearing And Bushing Inserter

123494723
15.014.20052: RNCC: 3 | RNVC: 2

18 Nov 1999

5120-12-387-7115
Piston Ring Expander

123877115
F30450332: RNCC: 3 | RNVC: 2

26 Jan 2012

5120-12-147-3198
Dorn

121473198
1X46106175: RNCC: 3 | RNVC: 2
V106175: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-369-8143
Driftpin

123698143
425589021500: RNCC: 3 | RNVC: 2
7083649: RNCC: 5 | RNVC: 2

17 Aug 2006

5120-12-130-9077
Socket Wrench

121309077
583901914: RNCC: 3 | RNVC: 2
3901914: RNCC: 5 | RNVC: 2
103: RNCC: 5 | RNVC: 2
583901914: RNCC: 5 | RNVC: 9
583901914: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-357-7128
Eindrueckwerkzeug

123577128
520012/0: RNCC: 3 | RNVC: 2

15 Jul 2002

5120-12-379-4892
Hand Pipe And Sewer Auger

123794892
7.2090: RNCC: 3 | RNVC: 2

29 Jul 2009

5120-12-150-3921
Getri Druckspindel

121503921
1X46908292: RNCC: 3 | RNVC: 2
V90829-2: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-166-5673
Screw Extractor

121665673
8551-4: RNCC: 3 | RNVC: 2
9010-4: RNCC: 3 | RNVC: 2
840-4: RNCC: 3 | RNVC: 9
54456: RNCC: 5 | RNVC: 9
4933980004: RNCC: 5 | RNVC: 9

24 Sep 1976

5120-12-127-3971
Spanner Wrench

121273971
4310: RNCC: 3 | RNVC: 2
1079451: RNCC: 5 | RNVC: 2
107945: RNCC: 5 | RNVC: 9
H6525: RNCC: 6 | RNVC: 9
BELZER4310: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-303-9395
Wire Stretcher

123039395
BSAH001: RNCC: 3 | RNVC: 2
BS AH 001: RNCC: 5 | RNVC: 2
ZBT SPE 004.001: RNCC: 5 | RNVC: 2

23 May 1985

5120-12-135-7316
Piston Ring Compressor

121357316
14018934900: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-304-3889
Gesperre Zuggeraet

123043889
12401200: RNCC: 3 | RNVC: 9

11 Jul 1985

5120-12-390-4274
Mechanical Puller Attachment

123904274
F6375392: RNCC: 3 | RNVC: 2

12 Nov 2012

5120-12-330-4724
Mechanical Puller Attachment

123304724
0850 1446.003: RNCC: 3 | RNVC: 2
8501446.003: RNCC: 5 | RNVC: 2

18 Dec 1992

5120-12-361-2886
Socket Wrench Socket

123612886
983716: RNCC: 3 | RNVC: 9
027263: RNCC: 5 | RNVC: 9

12 Sep 2003

5120-12-325-1705
Hand Terminal Crimping Tool

123251705
17D440SP: RNCC: 3 | RNVC: 2
17D440SP: RNCC: 5 | RNVC: 9

10 May 1991

5120-12-330-5532
Stud Inserter

123305532
0851 0473: RNCC: 3 | RNVC: 2
8510473: RNCC: 5 | RNVC: 2

8 Jan 1993

5120-12-329-9797
Spanner Wrench

123299797
0852 3140: RNCC: 3 | RNVC: 2
8523140: RNCC: 5 | RNVC: 2

17 Oct 1992

5120-12-127-2827
Mechanical Puller

121272827
4647: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-168-1128
Spanner Wrench

121681128
12709-21500W1: RNCC: 3 | RNVC: 2
12709-21500W1: RNCC: 5 | RNVC: 2
12709-21500W1: RNCC: 5 | RNVC: 9

18 Feb 1977

5120-12-344-1826
Machinist's Vise

123441826
HEUERFRONT120MMDREHBAR: RNCC: 3 | RNVC: 2
HEUERFRONT120MMDREHBAR: RNCC: 5 | RNVC: 9

23 Sep 1997

5120-12-134-2754

5120-12-134-2639

5120-12-372-0679
Driftpin

123720679
0004575801: RNCC: 2 | RNVC: 2
0004575801: RNCC: 3 | RNVC: 2

15 Jun 2007

5120-12-343-6377
Socket Wrench Socket

123436377
130415: RNCC: 3 | RNVC: 2

10 Jul 1997

5120-12-181-5091
Mechanical Puller

121815091
99346232: RNCC: 3 | RNVC: 2
144700: RNCC: 3 | RNVC: 2
181213: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-340-4752
Hand Tube Bender

123404752
280100: RNCC: 3 | RNVC: 2

19 Apr 1996

5120-12-382-3456
Driftpin

123823456
BRR20499: RNCC: 3 | RNVC: 2

9 Jun 2010

5120-12-312-2562
Cross Tip Screwdriver

123122562
223-3X150: RNCC: 3 | RNVC: 2
05017054001: RNCC: 3 | RNVC: 2
17054: RNCC: 3 | RNVC: 9
918SPZ-3: RNCC: 5 | RNVC: 2
66880-3: RNCC: 5 | RNVC: 2
918S-3: RNCC: 5 | RNVC: 9

9 Dec 1987

5120-12-387-3548
Socket Head Screw Key Set

123873548
05022088001: RNCC: 3 | RNVC: 2
950SPKL/9SMN: RNCC: 5 | RNVC: 2

1 Dec 2011

5120-12-151-6552
Montage- Bock

121516552
1004V3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-304-8511
Face Spanner Wrench Socket

123048511
80996030141: RNCC: 3 | RNVC: 2
80.99603.0141: RNCC: 5 | RNVC: 2

28 Aug 1985

5120-12-195-1710
Montage- Hebel

121951710
80.99606.0031: RNCC: 3 | RNVC: 2

19 Jan 1983

5120-12-176-1091
Gegenhalter

121761091
10-201: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-314-3083
Bearing And Bushing Inserter

123143083
0852 8766: RNCC: 3 | RNVC: 2
8528766: RNCC: 5 | RNVC: 2

24 Jun 1988

5120-12-135-8948

5120-12-373-1250
Hand Hammer

123731250
3366.050: RNCC: 3 | RNVC: 2
EH3366.050: RNCC: 5 | RNVC: 2

28 Sep 2007

5120-12-351-3297
Hand Hammer

123513297
5035030060: RNCC: 3 | RNVC: 2

13 Jul 2000

5120-12-197-9752
Zentrier- Ring

121979752
01TC31092: RNCC: 3 | RNVC: 2

7 Dec 1983

5120-12-322-0870
Ge Montierwerkzeug

123220870
0852 4470: RNCC: 3 | RNVC: 2
8524470: RNCC: 5 | RNVC: 2

23 Jul 1990

5120-12-330-4373
Mechanical Puller Attachment

123304373
0852 3057.004: RNCC: 3 | RNVC: 2
8523057.004: RNCC: 5 | RNVC: 2

15 Dec 1992

5120-12-338-2709
Hydraulic Jack Handle

123382709
98428768: RNCC: 3 | RNVC: 2

13 Jun 1995

5120-12-363-9692
Bearing And Bushing Inserter

123639692
T671P5002207: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-320-7678
Seal Inserter

123207678
62439300: RNCC: 3 | RNVC: 2

14 Feb 1990

5120-12-192-8061
Bearing And Bushing Inserter

121928061
343 589 02 15 00: RNCC: 3 | RNVC: 2
343589021500: RNCC: 3 | RNVC: 2

26 May 1982

5120-12-322-6696
Socket Wrench Screwdriver Attachment

123226696
2300223-264100.06.0: RNCC: 2 | RNVC: 2
2300223-264100.06.0: RNCC: 3 | RNVC: 2

11 Sep 1990

5120-12-182-7410
Slip Joint Pliers

121827410
387589003700: RNCC: 3 | RNVC: 2

25 Feb 1980

5120-12-364-1947
Eindrueckwerkzeug

123641947
F6557934: RNCC: 3 | RNVC: 2

31 Aug 2004

5120-12-050-0828

5120-12-091-7710

5120-12-355-3955
Abzieh- Und Aufdrue

123553955
5555200: RNCC: 3 | RNVC: 2

9 Nov 2001

5120-12-337-1081
Hand Roller

123371081
3056: RNCC: 3 | RNVC: 2

19 Jan 1995

5120-12-364-0850
Socket Wrench Socket

123640850
F30378692: RNCC: 3 | RNVC: 2
M55.093.026: RNCC: 5 | RNVC: 2
(241)A4249M55.093.026: RNCC: 8 | RNVC: 2

19 Aug 2004

5120-12-333-8668
Bearing And Bushing Inserter

123338668
327589023300: RNCC: 3 | RNVC: 2

18 Feb 1994

5120-12-314-1728
Ausdrueckwerkzeug

123141728
0852 8758: RNCC: 3 | RNVC: 2
8528758: RNCC: 5 | RNVC: 2

15 Jun 1988

5120-12-314-1731
Bearing And Bushing Inserter

123141731
0852 8763: RNCC: 3 | RNVC: 2
8528763: RNCC: 5 | RNVC: 2

15 Jun 1988

5120-12-389-5050
Torque Wrench Adapter

123895050
R819946: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-332-5325
Face Spanner Wrench Socket

123325325
VW 3217: RNCC: 3 | RNVC: 2
3217: RNCC: 3 | RNVC: 2

18 Aug 1993

5120-12-340-8986
Torque Wrench

123408986
61740002: RNCC: 3 | RNVC: 2

2 Jul 1996

5120-12-349-4640
Mechanical Puller Set

123494640
4521N/7: RNCC: 3 | RNVC: 2

17 Nov 1999

5120-12-126-5445
M Abdrueckschraube

121265445
3035890135: RNCC: 3 | RNVC: 2
3035890135: RNCC: 3 | RNVC: 9
303589013500: RNCC: 5 | RNVC: 2
303589013500: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-319-6859
W Spannvorrichtung

123196859
4900059-751800.000.0/1/2: RNCC: 3 | RNVC: 2

25 Oct 1989

5120-12-367-0484
Electronic Component Inserter And Remover

123670484
74Z-0-0-6: RNCC: 3 | RNVC: 2

1 Jul 2005

5120-12-314-1729
Bearing And Bushing Inserter

123141729
0852 8760: RNCC: 3 | RNVC: 2
8528760: RNCC: 5 | RNVC: 2

15 Jun 1988

5120-12-178-4497
Mechanical Puller

121784497
55030020: RNCC: 3 | RNVC: 9

20 Apr 1979

5120-12-157-3285
Open End Box Wrench

121573285
05874: RNCC: 3 | RNVC: 2
05874: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-335-3153
Mechanical Puller Attachment

123353153
0852 3032: RNCC: 3 | RNVC: 2
8523032: RNCC: 5 | RNVC: 2

9 Aug 1994

5120-12-363-8867
Bearing And Bushing Inserter

123638867
T670P5001236: RNCC: 3 | RNVC: 2

3 Aug 2004

5120-12-378-8553
Pliers Set

123788553
0965900601: RNCC: 3 | RNVC: 2
A0965 900 601: RNCC: 5 | RNVC: 2
391129151500: RNCC: 6 | RNVC: 9

20 May 2009

5120-12-311-1327
W Spannvorrichtung

123111327
406589043100: RNCC: 3 | RNVC: 2

29 Jul 1987

5120-12-335-2898
Spanner Wrench

123352898
0851 6853: RNCC: 3 | RNVC: 2
8516853: RNCC: 5 | RNVC: 2

4 Aug 1994

5120-12-370-2585
Combination Box And Open End Wrench Set

123702585
96830041: RNCC: 3 | RNVC: 2

16 Oct 2006

5120-12-364-4832
Socket Wrench Socket

123644832
11270001-TCS: RNCC: 3 | RNVC: 2

1 Oct 2004

5120-12-370-1340
Socket Wrench

123701340
12506-8: RNCC: 3 | RNVC: 2
33F-8: RNCC: 3 | RNVC: 2
43100008: RNCC: 5 | RNVC: 2

25 Sep 2006

5120-12-126-2152
Screwdriver Bit

121262152
3340-8: RNCC: 3 | RNVC: 2
1679-8: RNCC: 5 | RNVC: 9
2972-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-197-3405
Schrau Schutzbacke

121973405
0203D101544/1-4: RNCC: 3 | RNVC: 2

13 Oct 1983

5120-12-369-5326
Spatula

123695326
A4.024.020: RNCC: 3 | RNVC: 2

19 Jul 2006

5120-12-325-4315
Spanner Wrench

123254315
1 607 950 048: RNCC: 3 | RNVC: 9

6 Jun 1991

5120-12-357-8971
Flat Tip Screwdriver

123578971
535012255A: RNCC: 3 | RNVC: 2

8 Aug 2002

5120-12-349-4034
Driftpin

123494034
0986612114: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-382-7528
Flat Tip Screwdriver

123827528
46601040-TCS: RNCC: 3 | RNVC: 2

4 Aug 2010

5120-12-328-4271
Zy Montierwerkzeug

123284271
F70097763: RNCC: 3 | RNVC: 2

16 May 1992

5120-12-135-2106

5120-12-145-4248
Mechanical Puller

121454248
0977089100: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-127-5420

5120-12-176-1107
Eintreibwerkzeug

121761107
3025: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-191-3582
Drive Pin Punch

121913582
CF493186: RNCC: 3 | RNVC: 2
CF 493 186: RNCC: 3 | RNVC: 2
CF493186: RNCC: 3 | RNVC: 2
CF 493 186: RNCC: 5 | RNVC: 2

26 Jan 1982

5120-12-170-2608

5120-12-195-0962
Hand Blind Riveter

121950962
0852 5487: RNCC: 3 | RNVC: 2
8525487: RNCC: 5 | RNVC: 2

12 Jan 1983

5120-12-383-3128
Spanner Wrench

123833128
000-091: RNCC: 3 | RNVC: 2

6 Oct 2010

5120-12-303-5234
Elektron Auszieher

123035234
215383: RNCC: 3 | RNVC: 2

29 Mar 1985

5120-12-375-2858
Concrete Corner Tool

123752858
885 100 00: RNCC: 3 | RNVC: 2
885 100: RNCC: 5 | RNVC: 2

15 May 2008

5120-12-382-6941
Socket Wrench Socket

123826941
02110014-TCS: RNCC: 3 | RNVC: 2

27 Jul 2010

5120-12-021-6813

5120-12-196-8592

5120-12-370-1314
Socket Wrench Set

123701314
96838175: RNCC: 3 | RNVC: 2

25 Sep 2006

5120-12-350-2553
Bl Ausbeulwerkzeug

123502553
068/2: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-385-6192
M Indentation Tool

123856192
F6453613: RNCC: 3 | RNVC: 2

22 Jun 2011

5120-12-312-7825
Lager- Und Einsatz

123127825
1X56104932: RNCC: 3 | RNVC: 2
1X56 104 932: RNCC: 5 | RNVC: 2
V104932: RNCC: 5 | RNVC: 2

4 Feb 1988

5120-12-308-1620
Gew Spann- Huelse

123081620
01500607032: RNCC: 3 | RNVC: 2
0150 0607 032: RNCC: 5 | RNVC: 2

9 Sep 1986

5120-12-145-1770

5120-12-331-6056
Bearing And Bushing Inserter

123316056
80996060317: RNCC: 3 | RNVC: 2
80.99606.0317: RNCC: 5 | RNVC: 2
V1177: RNCC: 5 | RNVC: 2

27 May 1993

5120-12-168-5760
Socket Wrench

121685760
0273A13: RNCC: 3 | RNVC: 2

23 Mar 1977

5120-12-340-2512
Gew Spann- Huelse

123402512
474945: RNCC: 3 | RNVC: 9
474945: RNCC: 3 | RNVC: 9

19 Mar 1996

5120-12-135-7491

5120-12-368-6865
Socket Wrench Screwdriver Attachment

123686865
3244-TX 10: RNCC: 3 | RNVC: 2
00.47.62.09: RNCC: 5 | RNVC: 2

6 Apr 2006

5120-12-187-6600
Screw Thread Insert Inserter

121876600
0150 0107000: RNCC: 3 | RNVC: 2
01500107000: RNCC: 5 | RNVC: 2

24 Apr 1981

5120-12-365-0529
Mechanical Puller Attachment

123650529
CBD45463P05: RNCC: 3 | RNVC: 2

25 Nov 2004

5120-12-387-1182
Hous Mounting Tool

123871182
F6555180: RNCC: 3 | RNVC: 2

8 Nov 2011

5120-12-374-3591
Socket Wrench Socket

123743591
02040015-TCS: RNCC: 3 | RNVC: 2

11 Feb 2008

5120-12-388-4921
Torque Wrench Multiplier

123884921
008.030: RNCC: 3 | RNVC: 2
008.030: RNCC: 5 | RNVC: 2

27 Mar 2012

5120-12-304-5227
Schluesseleinsatz

123045227
31R15: RNCC: 3 | RNVC: 2
624586: RNCC: 5 | RNVC: 2

26 Jul 1985

5120-12-342-1654
Socket Head Screw Key

123421654
1X56136270: RNCC: 3 | RNVC: 2

19 Dec 1996

5120-12-126-1527
Spatula

121261527
DIN7216-A20: RNCC: 2 | RNVC: 2
A20DIN7216: RNCC: 5 | RNVC: 2
DIN7216A20: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-389-5119
Torque Wrench Adapter

123895119
R809506: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-183-0994
Dorn

121830994
4190431: RNCC: 3 | RNVC: 2

20 Mar 1980

5120-12-197-4583
Socket Wrench

121974583
DIN904-L14: RNCC: 2 | RNVC: 2

24 Oct 1983

5120-12-366-5526
Open End Wrench

123665526
F30450735: RNCC: 3 | RNVC: 2

9 May 2005

5120-12-349-4020
Eindrueckwerkzeug

123494020
0986612065: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-150-8987

5120-12-328-6469
Bearing And Bushing Inserter And Remover

123286469
F30278361: RNCC: 3 | RNVC: 2
F361160278361: RNCC: 5 | RNVC: 2

11 Jun 1992

5120-12-384-0039
Pliers

123840039
F30378717: RNCC: 3 | RNVC: 2

11 Jan 2011

5120-12-360-7004
Montierhuelse

123607004
0015384030: RNCC: 3 | RNVC: 2

1 Jul 2003

5120-12-176-1335
Socket Head Screw Key

121761335
C1997M14: RNCC: 3 | RNVC: 2
148628: RNCC: 5 | RNVC: 2
907814: RNCC: 5 | RNVC: 9
C1997M14MM: RNCC: 6 | RNVC: 9

9 Nov 1978

5120-12-021-2590

5120-12-368-1113
Socket Wrench Screwdriver Attachment

123681113
01050006-TCS: RNCC: 3 | RNVC: 2

8 Dec 2005

5120-12-347-4996
Hand Terminal Crimping Tool

123474996
TT864RS: RNCC: 3 | RNVC: 2

18 Dec 1998

5120-12-364-9366
Pliers

123649366
T3772 1D130: RNCC: 3 | RNVC: 2

17 Nov 2004

5120-12-387-2609
Mechanical Puller Step Plate

123872609
030.243: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-12-363-9275
Bearing And Bushing Inserter And Remover

123639275
T670P5001273: RNCC: 3 | RNVC: 2

5 Aug 2004

5120-12-188-7193
Torque Wrench Adapter

121887193
R809234: RNCC: 3 | RNVC: 2
000589660300: RNCC: 5 | RNVC: 2
809234: RNCC: 5 | RNVC: 2
809234: RNCC: 5 | RNVC: 9

27 Jul 1981

5120-12-173-4340
Spanner Wrench

121734340
532008G5W1: RNCC: 3 | RNVC: 2
532008G5W1: RNCC: 5 | RNVC: 2
532008G5W1: RNCC: 5 | RNVC: 9
532008G5W1: RNCC: 5 | RNVC: 9

14 Apr 1978

5120-12-368-9553
Mitnehmersch Stift

123689553
52670: RNCC: 3 | RNVC: 2

9 May 2006

5120-12-140-2289

5120-12-140-3886

5120-12-164-6324
Spanner Wrench

121646324
264-253: RNCC: 3 | RNVC: 2
264-253: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-198-7951
Mut Sprengwerkzeug

121987951
0714 526 010: RNCC: 3 | RNVC: 2
55/0: RNCC: 3 | RNVC: 2
55/0: RNCC: 3 | RNVC: 2
51921101: RNCC: 3 | RNVC: 2
51920101: RNCC: 5 | RNVC: 9

27 Feb 1984

5120-12-302-4418
Linear Actuating Cylinder Cap

123024418
304735.0: RNCC: 3 | RNVC: 2
0005830183: RNCC: 5 | RNVC: 2

29 Dec 1984

5120-12-158-1041
Mechanical Puller

121581041
SS2603-4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-120-6659
Socket Wrench Socket

121206659
20L-1/4: RNCC: 3 | RNVC: 2
108880: RNCC: 5 | RNVC: 9
6800Z1-4: RNCC: 5 | RNVC: 9
01420016: RNCC: 5 | RNVC: 9
40AL1-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-345-5638
Hand Lead Seal Press

123455638
SP71: RNCC: 3 | RNVC: 2
R51313: RNCC: 5 | RNVC: 2

31 Mar 1998

5120-12-373-4531
Socket Head Screw Key

123734531
0613 140 30: RNCC: 3 | RNVC: 2
54978: RNCC: 3 | RNVC: 2
4001002549784: RNCC: 5 | RNVC: 2

6 Nov 2007

5120-12-319-4854
Eindrueckwerkzeug

123194854
99363245: RNCC: 3 | RNVC: 2

5 Oct 1989

5120-12-317-7385
Aufdrueckwerkzeug

123177385
52695010: RNCC: 3 | RNVC: 9
61751: RNCC: 3 | RNVC: 9

5 May 1989

5120-12-347-2762
Slip Joint Pliers

123472762
8225: RNCC: 3 | RNVC: 2
00.13.20.59: RNCC: 5 | RNVC: 2

19 Nov 1998

5120-12-360-8744
Mechanical Puller

123608744
0853 9389: RNCC: 3 | RNVC: 2

18 Jul 2003

5120-12-189-4690
Bearing And Bushing Inserter

121894690
387589061500: RNCC: 3 | RNVC: 2

29 Sep 1981

5120-12-369-0185
Socket Wrench Adapter

123690185
770-L14: RNCC: 3 | RNVC: 2
00.47.90.37: RNCC: 5 | RNVC: 2

15 May 2006

5120-12-021-2457

5120-12-383-8978
Sealant Dispenser

123838978
LECAMATIC 50/M: RNCC: 3 | RNVC: 2

17 Dec 2010

5120-12-306-3751
Hand Rivet Set Assortment

123063751
744610-5: RNCC: 3 | RNVC: 2
74490-5: RNCC: 5 | RNVC: 9

25 Feb 1986

5120-12-365-0111
Socket Wrench

123650111
6-615: RNCC: 3 | RNVC: 2

23 Nov 2004

5120-12-350-5576
Spanner Wrench

123505576
A206040: RNCC: 3 | RNVC: 2

14 Apr 2000

5120-12-313-6564
Ge Montierwerkzeug

123136564
VW293: RNCC: 3 | RNVC: 2

22 Apr 1988

5120-12-349-4869
Mechanical Puller

123494869
01TC33089: RNCC: 3 | RNVC: 2

22 Nov 1999

5120-12-121-1186

5120-12-120-6583

5120-12-180-0801
Torque Wrench Adapter

121800801
0706D100870-2: RNCC: 3 | RNVC: 2

17 Aug 1979

5120-12-375-8576
Mechanical Puller

123758576
20-40-4: RNCC: 3 | RNVC: 2

14 Jul 2008

5120-12-195-0080
Mechanical Puller Attachment

121950080
1X56136310: RNCC: 3 | RNVC: 2

29 Dec 1982

5120-12-392-5089
Cross Tip Screwdriver

123925089
501 305 10: RNCC: 3 | RNVC: 2
4007157313300: RNCC: 5 | RNVC: 2

13 Jun 2013

5120-12-094-0360

5120-12-359-5545
Bearing And Bushing Inserter

123595545
T622P3005110: RNCC: 3 | RNVC: 2

18 Feb 2003

5120-12-318-2893
Mechanical Puller

123182893
108589023300: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-12-374-3682
Socket Wrench Extension

123743682
11010011-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-389-5310
Socket Head Screw Key

123895310
48560007-TCS: RNCC: 3 | RNVC: 2

18 Jul 2012

5120-12-391-0655
Rotat Holding Tool

123910655
F6555714: RNCC: 3 | RNVC: 2

22 Jan 2013

5120-12-372-3960
W Spannvorrichtung

123723960
563100: RNCC: 3 | RNVC: 2

12 Jul 2007

5120-12-364-2329
Mechanical Puller

123642329
F6557909: RNCC: 3 | RNVC: 2

2 Sep 2004

5120-12-134-2646
Box Wrench

121342646
VM71638-2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-326-5299
Mechanical Puller Attachment

123265299
4900343: RNCC: 3 | RNVC: 2

1 Oct 1991

5120-12-322-3420
Mechanical Puller

123223420
0851 6842: RNCC: 3 | RNVC: 2
8516842: RNCC: 5 | RNVC: 2

13 Aug 1990

5120-12-196-5870
Montage- Hebel

121965870
2574-1: RNCC: 3 | RNVC: 2
2078: RNCC: 5 | RNVC: 2
VW 2078: RNCC: 5 | RNVC: 2
5748620002: RNCC: 5 | RNVC: 2
2078: RNCC: 5 | RNVC: 2

20 Jul 1983

5120-12-328-6969
Mechanical Puller

123286969
Y4098728: RNCC: 3 | RNVC: 2
Y414018098728: RNCC: 5 | RNVC: 2

16 Jun 1992

5120-12-146-7591
Dorn

121467591
92010351: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-364-3449
Socket Wrench Adapter

123643449
12030003-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-126-5960
Mitn Verlaengerung

121265960
WU48: RNCC: 3 | RNVC: 2
WU48: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-362-4433
Adjustable Wrench

123624433
T4365 10: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-12-194-6682
Handicraft Snap Fastener Setter

121946682
F990: RNCC: 3 | RNVC: 2
S63: RNCC: 5 | RNVC: 2

25 Nov 1982

5120-12-322-3631
Socket Head Screw Key

123223631
E-5255: RNCC: 3 | RNVC: 2
E-5255: RNCC: 5 | RNVC: 2

15 Aug 1990

5120-12-372-4124
Hand Terminal Crimping Tool

123724124
9013650000: RNCC: 3 | RNVC: 2
PZ 6 HEX: RNCC: 5 | RNVC: 2

16 Jul 2007

5120-12-369-4964
Handling Tool Arm

123694964
14860: RNCC: 3 | RNVC: 2

12 Jul 2006

5120-12-359-0853
Zentrier- Ring

123590853
80996040195: RNCC: 3 | RNVC: 2

16 Dec 2002

5120-12-390-1871
Hydraulic Jack Handle

123901871
F6557980: RNCC: 3 | RNVC: 2

12 Oct 2012

5120-12-370-5386
Hand Hammer

123705386
11E-2: RNCC: 3 | RNVC: 2
4010883859264: RNCC: 5 | RNVC: 2
8592650: RNCC: 5 | RNVC: 2

20 Nov 2006

5120-12-325-1314
Mechanical Puller Step Plate

123251314
1000173-992000.003.0: RNCC: 2 | RNVC: 2
1000173-992000.003.0: RNCC: 3 | RNVC: 2

7 May 1991

5120-12-389-5363
Socket Head Screw Key

123895363
48560025-TCS: RNCC: 3 | RNVC: 2

18 Jul 2012

5120-12-332-1496
Driftpin

123321496
410 0060 0 4: RNCC: 3 | RNVC: 9
0450 110 00018: RNCC: 5 | RNVC: 9
0450 110 00018: RNCC: 5 | RNVC: 9

22 Jul 1993

5120-12-368-9778
Rohr- Zange

123689778
111 040 2: RNCC: 3 | RNVC: 2
00.13.25.64: RNCC: 5 | RNVC: 2

10 May 2006

5120-12-301-8989
Socket Wrench

123018989
9238271650: RNCC: 3 | RNVC: 2
4520008: RNCC: 5 | RNVC: 9

15 Nov 1984

5120-12-343-0357
Socket Wrench Socket

123430357
80996030225: RNCC: 3 | RNVC: 2

24 Apr 1997

5120-12-353-8483
Socket Wrench

123538483
001589470900: RNCC: 3 | RNVC: 2
001589470900: RNCC: 5 | RNVC: 2
001589470900: RNCC: 5 | RNVC: 2

15 May 2001

5120-12-139-3009

5120-12-139-3018
Abziehvorrichtung

121393018
8205892133: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-382-6763
Open End Wrench

123826763
0909856: RNCC: 3 | RNVC: 2

23 Jul 2010

5120-12-126-2985
Offset Screwdriver

121262985
10647: RNCC: 3 | RNVC: 2
FGWZ4AA3: RNCC: 5 | RNVC: 2
10647: RNCC: 5 | RNVC: 9
3017: RNCC: 5 | RNVC: 9
108431: RNCC: 5 | RNVC: 9
5414A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-382-7915
Cross Tip Screwdriver

123827915
46360008-TCS: RNCC: 3 | RNVC: 2

10 Aug 2010

5120-12-317-4083
Electrical Contact Inserter

123174083
09 99 000 0088: RNCC: 3 | RNVC: 2

5 Apr 1989

5120-12-126-5430
Aufzie Gegenhalter

121265430
4015890231: RNCC: 3 | RNVC: 2
4015890231: RNCC: 3 | RNVC: 9
401589023100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-3024
Verbindungsstueck

121393024
8205891763: RNCC: 3 | RNVC: 2
014M04100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-360-5115
Socket Wrench

123605115
291012219: RNCC: 3 | RNVC: 2

28 May 2003

5120-12-394-6118
Seal Remover

123946118
F6787262: RNCC: 3 | RNVC: 2

18 Dec 2013

5120-12-182-5242
Treiber

121825242
VW244B: RNCC: 3 | RNVC: 9

8 Feb 1980

5120-12-383-4580
Mechanical Puller

123834580
T661P1004105: RNCC: 3 | RNVC: 2

22 Oct 2010

5120-12-363-3289
Seil Haltewerkzeug

123633289
B00079: RNCC: 3 | RNVC: 2

27 May 2004

5120-12-091-3620

5120-12-350-2715
Bl Ausbeulwerkzeug

123502715
066TR: RNCC: 3 | RNVC: 2

9 Mar 2000

5120-12-182-4196
Druckstueck

121824196
VW431: RNCC: 3 | RNVC: 9

30 Jan 1980

5120-12-384-0715
Seal Inserter And Remover

123840715
F30378956: RNCC: 3 | RNVC: 2

18 Jan 2011

5120-12-390-4309
Box Wrench

123904309
F30371149: RNCC: 3 | RNVC: 2

13 Nov 2012

5120-12-092-2290

5120-12-120-9171
Socket Wrench Socket

121209171
20L-1/2: RNCC: 3 | RNVC: 2
108886: RNCC: 5 | RNVC: 9
6800Z1-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-324-7176
Mechanical Puller

123247176
3 33 1 830: RNCC: 3 | RNVC: 2
30 331 830: RNCC: 5 | RNVC: 9

19 Mar 1991

5120-12-123-4997
Hand Hammer

121234997
031A227: RNCC: 3 | RNVC: 2
293: RNCC: 5 | RNVC: 9
107601: RNCC: 5 | RNVC: 9
293: RNCC: 5 | RNVC: 9
3721: RNCC: 5 | RNVC: 9
1949-4: RNCC: 5 | RNVC: 9
56800: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-7482
Wood Turn Pin Set

123887482
92164890: RNCC: 3 | RNVC: 2

19 Apr 2012

5120-12-177-7771
Socket Head Screw Key Set

121777771
1997LZ10T: RNCC: 3 | RNVC: 2
130251: RNCC: 5 | RNVC: 2

19 Feb 1979

5120-12-177-9222

5120-12-384-7624
Socket Wrench

123847624
F30278758: RNCC: 3 | RNVC: 2

25 Mar 2011

5120-12-339-9701
Mechanical Puller

123399701
5078407: RNCC: 3 | RNVC: 2

7 Feb 1996

5120-12-044-5049

5120-12-344-8111
Schraubendrehersatz

123448111
8060VDE-S7: RNCC: 3 | RNVC: 2
1766726: RNCC: 5 | RNVC: 2

11 Dec 1997

5120-12-129-6230
Spanner Wrench

121296230
5066996: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-382-3406
Pliers

123823406
0641200C: RNCC: 3 | RNVC: 2

8 Jun 2010

5120-12-023-1422

5120-12-186-7333
Mechanical Puller

121867333
99347058: RNCC: 3 | RNVC: 2
416150: RNCC: 5 | RNVC: 9
416150: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-350-2712
Bl Ausbeulwerkzeug

123502712
065/S: RNCC: 3 | RNVC: 2

9 Mar 2000

5120-12-133-3472
Piston Inserter

121333472
CH1989-12NM: RNCC: 3 | RNVC: 2
1201 9464: RNCC: 5 | RNVC: 2
A26-50-119: RNCC: 5 | RNVC: 9
CH1989-12NM: RNCC: 5 | RNVC: 9
WA28447A: RNCC: 5 | RNVC: 9
12019464: RNCC: 5 | RNVC: 9
A26.50-119: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-192-7099
Face Spanner Wrench Socket

121927099
01TC31076: RNCC: 3 | RNVC: 2
01TC30063: RNCC: 5 | RNVC: 9

17 May 1982

5120-12-347-5572
Seal Inserter

123475572
389 589 00 15 00: RNCC: 3 | RNVC: 2
389589001500: RNCC: 5 | RNVC: 2

6 Jan 1999

5120-12-364-4778
Blindni Mundstueck

123644778
091713: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-198-3436
Torque Wrench Adapter

121983436
2300109-990940.004.0: RNCC: 2 | RNVC: 2
2300109-990940.004.0: RNCC: 3 | RNVC: 2
2300109-990940.004.0: RNCC: 3 | RNVC: 2
2300109-990940.004.0: RNCC: 5 | RNVC: 2

18 Jan 1984

5120-12-351-4409
W Spannvorrichtung

123514409
7671 798 651: RNCC: 3 | RNVC: 2

26 Jul 2000

5120-12-358-4838
Socket Wrench Handle Bar

123584838
81668076021: RNCC: 3 | RNVC: 2

21 Oct 2002

5120-12-363-9545
Bearing And Bushing Inserter And Remover

123639545
T671P5002107: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-368-1996
Socket Wrench Socket

123681996
02410036-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-162-2174
Fuse Puller

121622174
2215701: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-302-6992
Piston Ring Compressor

123026992
57499-645: RNCC: 3 | RNVC: 2

23 Jan 1985

5120-12-187-4204
Spanner Wrench

121874204
264-731: RNCC: 3 | RNVC: 2

8 Apr 1981

5120-12-195-1236
Seal Inserter

121951236
7428798054: RNCC: 3 | RNVC: 2
7428798054: RNCC: 5 | RNVC: 9

13 Jan 1983

5120-12-154-2538
Open End Wrench

121542538
4TS47T13961: RNCC: 3 | RNVC: 2
4TS47T13961: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-0128
Mechanical Puller

123300128
0851 8032: RNCC: 3 | RNVC: 2
8518032: RNCC: 5 | RNVC: 2

22 Oct 1992

5120-12-130-3390

5120-12-335-6853
Face Spanner Wrench Socket

123356853
073-149001-000-0: RNCC: 2 | RNVC: 2
073-149001-000-0: RNCC: 3 | RNVC: 2

13 Sep 1994

5120-12-133-3589
Screwdriver Bit

121333589
177-181: RNCC: 3 | RNVC: 2
A44-27: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5108
Open End Wrench

121235108
NO PRIMARY REF 12-123-5108: RNCC: 3 | RNVC: 2
905007: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-339-3229
Seal Inserter

123393229
E.1159699-0233: RNCC: 3 | RNVC: 2
596-095: RNCC: 5 | RNVC: 2
596-095: RNCC: 5 | RNVC: 9
E.1159699-0233: RNCC: 5 | RNVC: 9

9 Nov 1995

5120-12-336-5876
Montierhuelse

123365876
0851 5282: RNCC: 3 | RNVC: 2
8515282: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-369-1087
Seal Inserter

123691087
0986613242: RNCC: 3 | RNVC: 2

23 May 2006

5120-12-343-6800
Swivel Knob Jeweler's Screwdriver

123436800
240 045 90: RNCC: 3 | RNVC: 2

14 Jul 1997

5120-12-312-2454
Piston Ring Compressor

123122454
0000 843 2600: RNCC: 3 | RNVC: 2

8 Dec 1987

5120-12-357-7342
Montierhuelse

123577342
F30279552: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-382-1927
Socket Head Screw Key

123821927
0250090S: RNCC: 3 | RNVC: 2

20 May 2010

5120-12-355-3191
Drive Pin Punch

123553191
5304369: RNCC: 3 | RNVC: 2

31 Oct 2001

5120-12-367-7421
Drive Pin Punch

123677421
VW 3070/7: RNCC: 3 | RNVC: 2

5 Oct 2005

5120-12-188-9478
Montagewerkzeug

121889478
053471 E: RNCC: 3 | RNVC: 2

11 Aug 1981

5120-12-123-5762
Socket Wrench Socket

121235762
7800DM41: RNCC: 3 | RNVC: 2
109742: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-392-9352
Sheet Metalworking Stake

123929352
10832: RNCC: 3 | RNVC: 2
70210015: RNCC: 5 | RNVC: 2

24 Jul 2013

5120-12-021-2455

5120-12-179-5816
Zugseil

121795816
32190-35M: RNCC: 3 | RNVC: 2

11 Jul 1979

5120-12-353-1174
Mechanical Puller Attachment

123531174
CBD30086P01: RNCC: 3 | RNVC: 2

30 Jan 2001

5120-12-179-8637
Socket Wrench

121798637
081120: RNCC: 3 | RNVC: 9
6-105: RNCC: 3 | RNVC: 9

3 Aug 1979

5120-12-381-8999
Flat Tip Screwdriver

123818999
0806015C: RNCC: 3 | RNVC: 2

15 Apr 2010

5120-12-158-5441
Box Wrench

121585441
740003033: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-369-7726
Dreh Haltewerkzeug

123697726
904589010700: RNCC: 3 | RNVC: 2
7083668: RNCC: 5 | RNVC: 2

16 Aug 2006

5120-12-358-2653
Screwdriver Bit

123582653
614786065: RNCC: 3 | RNVC: 2
614 786 065: RNCC: 5 | RNVC: 2

2 Oct 2002

5120-12-352-8778
Socket Wrench Adapter

123528778
985KUKA: RNCC: 3 | RNVC: 2

28 Dec 2000

5120-12-342-9256
Torque Wrench

123429256
NO PRIMARY REF 12-342-9256: RNCC: 3 | RNVC: 2
65588: RNCC: 5 | RNVC: 2
80.99619.0005: RNCC: 5 | RNVC: 2
80996190005: RNCC: 5 | RNVC: 2
65009-7232: RNCC: 5 | RNVC: 9

16 Apr 1997

5120-12-365-1230
Socket Wrench

123651230
4615810201: RNCC: 3 | RNVC: 2

30 Nov 2004

5120-12-365-5400
Flat Tip Screwdriver

123655400
47281050-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-355-9214
Aufdrueckwerkzeug

123559214
100830: RNCC: 3 | RNVC: 2

7 Jan 2002

5120-12-150-2735
Mechanical Puller

121502735
23176-264310-00-0: RNCC: 2 | RNVC: 2
23176-264310.00.0: RNCC: 2 | RNVC: 2
23176-264310-00-0: RNCC: 5 | RNVC: 2
23176-264310-00-0: RNCC: 5 | RNVC: 2
23176-264310.00.0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-363-2376
Bearing And Bushing Inserter

123632376
F30377890: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-370-7817
Driftpin

123707817
DDAO015: RNCC: 3 | RNVC: 2

20 Dec 2006

5120-12-306-0831
Lifting Pneumatic Bag

123060831
1310 0015 00: RNCC: 3 | RNVC: 2
TYP V40: RNCC: 5 | RNVC: 2
1310001500: RNCC: 5 | RNVC: 2
84105000: RNCC: 5 | RNVC: 9
84147000: RNCC: 5 | RNVC: 9
131 07 000: RNCC: 5 | RNVC: 9

24 Jan 1986

5120-12-123-5110
Open End Wrench

121235110
4200482: RNCC: 3 | RNVC: 2
402BECU16X18: RNCC: 3 | RNVC: 2
402BECU16X18: RNCC: 3 | RNVC: 9
420 0482: RNCC: 5 | RNVC: 2
905016: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-365-9155
Swivel Knob Jeweler's Screwdriver

123659155
T4880X 415: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-091-4756

5120-12-383-4267
Spring Inserter And Remover

123834267
F6095299: RNCC: 3 | RNVC: 2

19 Oct 2010

5120-12-376-1251
Trench Brace

123761251
138 290: RNCC: 3 | RNVC: 2

14 Aug 2008

5120-12-163-6094
Mechanical Puller

121636094
105-31762W2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-387-3780
Socket Wrench

123873780
76.21: RNCC: 3 | RNVC: 2

6 Dec 2011

5120-12-159-6243
Spanner Wrench

121596243
2300109-990228.000.0: RNCC: 2 | RNVC: 2
764C18-40-3: RNCC: 3 | RNVC: 2
52112-1: RNCC: 3 | RNVC: 2
2300109-990228.000.0: RNCC: 3 | RNVC: 2
2300109-990228.000.0: RNCC: 3 | RNVC: 2
2300109-990228-000-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-309-2838
Seal Inserter

123092838
824122-4000: RNCC: 3 | RNVC: 2

9 Jan 1987

5120-12-135-3866
Vise Jaw Caps

121353866
51075020: RNCC: 3 | RNVC: 2
4308-125: RNCC: 5 | RNVC: 2
51075-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-137-5839

5120-12-389-0026
Mechanical Puller Adapter

123890026
80996010234: RNCC: 3 | RNVC: 2
80.99601-0234: RNCC: 5 | RNVC: 2

15 May 2012

5120-12-394-0424
Cross Tip Screwdriver

123940424
500042505: RNCC: 3 | RNVC: 2

31 Oct 2013

5120-12-362-2591
Offset Screwdriver Set

123622591
96593530: RNCC: 3 | RNVC: 2

29 Jan 2004

5120-12-310-0436
Box Wrench

123100436
2W5-8X3-4: RNCC: 3 | RNVC: 2
TVA5120-2-263-031.1.1.51: RNCC: 5 | RNVC: 2
20E5/8X3/4: RNCC: 5 | RNVC: 9

31 Mar 1987

5120-12-120-5134
Saddler's Pegging Awl Blade

121205134
TL5120-0114-7: RNCC: 2 | RNVC: 2
3801274: RNCC: 3 | RNVC: 2
660-274: RNCC: 5 | RNVC: 2
274: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5248
Box Wrench

121235248
DIN837-A46X50: RNCC: 2 | RNVC: 2
A46X50DIN837: RNCC: 5 | RNVC: 2
A46X50DIN837GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-161-4476
Mitnehme Schluessel

121614476
A887: RNCC: 3 | RNVC: 2
63960242: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-316-0606
Craftsman's Tweezers

123160606
07 90 901 011: RNCC: 3 | RNVC: 2
4806522: RNCC: 5 | RNVC: 9

17 Dec 1988

5120-12-148-0667
Schluessel

121480667
053909: RNCC: 3 | RNVC: 2
WZ81: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-307-5304
Spanner Wrench

123075304
2300013-7123.00: RNCC: 2 | RNVC: 2
2300013-7123.00: RNCC: 5 | RNVC: 2
2300013-7123.00: RNCC: 5 | RNVC: 9

26 Jun 1986

5120-12-365-9179
Swivel Knob Jeweler's Screwdriver

123659179
T4881X 09: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-385-4953
Face Spanner Wrench Socket

123854953
4615810401: RNCC: 3 | RNVC: 2

9 Jun 2011

5120-12-121-6885

5120-12-364-5515
Swivel Knob Jeweler's Screwdriver

123645515
47510003-TCS: RNCC: 3 | RNVC: 2

8 Oct 2004

5120-12-382-2078
Pinch Bar

123822078
1600450S: RNCC: 3 | RNVC: 2

20 May 2010

5120-12-371-7250
Pedal Adjustment Tool Compressor

123717250
405589013100: RNCC: 3 | RNVC: 2

9 May 2007

5120-12-306-7909
Mechanical Puller

123067909
60425491: RNCC: 3 | RNVC: 2
03001501: RNCC: 5 | RNVC: 9
03001501162: RNCC: 5 | RNVC: 9
60425401: RNCC: 5 | RNVC: 9
6042540116: RNCC: 5 | RNVC: 9

3 Apr 1986

5120-12-134-2626
Schluesseleinsatz

121342626
029M00401: RNCC: 3 | RNVC: 2
080M02800: RNCC: 5 | RNVC: 2
VM65654: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-176-2230
Drive Pin Punch

121762230
51288034: RNCC: 3 | RNVC: 9

13 Nov 1978

5120-12-144-6087
Sperrvorrichtung

121446087
837589133100: RNCC: 3 | RNVC: 2
8375891331: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-349-3931
Montierdorn

123493931
2300211-990611.000.0: RNCC: 2 | RNVC: 2
2300211-990611.000.0: RNCC: 3 | RNVC: 2

9 Nov 1999

5120-12-178-9381
Schluessel

121789381
667803210801: RNCC: 2 | RNVC: 2

25 May 1979

5120-12-120-9691
Socket Wrench Crowfoot Attachment

121209691
FC32: RNCC: 3 | RNVC: 2
AN8506-10: RNCC: 5 | RNVC: 9
105670: RNCC: 5 | RNVC: 9
1951Z1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-321-6368
Montage- Hebel

123216368
2041: RNCC: 3 | RNVC: 2

11 Jun 1990

5120-12-319-8170
Montage- Hebel

123198170
2696426: RNCC: 3 | RNVC: 2

8 Nov 1989

5120-12-341-0744
Mechanical Puller

123410744
170060: RNCC: 3 | RNVC: 2
80996010130: RNCC: 5 | RNVC: 2

25 Jul 1996

5120-12-303-3988
Blindni Mundstueck

123033988
327 500: RNCC: 3 | RNVC: 2

20 Mar 1985

5120-12-381-9226
Fixed Open End Wrench Set

123819226
0110001S: RNCC: 3 | RNVC: 2

19 Apr 2010

5120-12-347-5840
Socket Wrench Socket

123475840
45TX-E5: RNCC: 3 | RNVC: 2

11 Jan 1999

5120-12-362-5448
Socket Wrench Set

123625448
96593431: RNCC: 3 | RNVC: 2

5 Mar 2004

5120-12-353-4605
Pliers

123534605
0206225: RNCC: 3 | RNVC: 2
010036: RNCC: 5 | RNVC: 2

27 Mar 2001

5120-12-353-2080
Socket Wrench Extension

123532080
CBD45071G01: RNCC: 3 | RNVC: 2

12 Feb 2001

5120-12-129-4533

5120-12-151-6543
Aufnahmevorrichtung

121516543
1004-0200V3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-186-7318
Klemmbuegel

121867318
99363236: RNCC: 3 | RNVC: 2
420060: RNCC: 5 | RNVC: 9
420060: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-332-6143
Spanner Wrench

123326143
532417-9002.903: RNCC: 3 | RNVC: 2
10050395: RNCC: 5 | RNVC: 2
532417-9002.903: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-090-1857

5120-12-358-4885
Hand Tube Bender

123584885
240022: RNCC: 3 | RNVC: 2

21 Oct 2002

5120-12-355-4995
Dreh Haltewerkzeug

123554995
5558355: RNCC: 3 | RNVC: 2

20 Nov 2001

5120-12-159-4700
Montagevorrichtung

121594700
1687018002: RNCC: 3 | RNVC: 2
1 687 018 002: RNCC: 5 | RNVC: 2
83091006026: RNCC: 5 | RNVC: 2
EFEP584: RNCC: 5 | RNVC: 9
KDEP2881: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-8322
Mechanical Puller

121358322
VW204B: RNCC: 3 | RNVC: 2
VW204B: RNCC: 5 | RNVC: 2
108296: RNCC: 5 | RNVC: 9
4570-7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-010-9616

5120-12-364-6787
Socket Wrench Socket

123646787
03010015-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-312-7826
Gear Inserter

123127826
1X56126468: RNCC: 3 | RNVC: 2
V126468: RNCC: 5 | RNVC: 2
1X56 126 468: RNCC: 5 | RNVC: 2

4 Feb 1988

5120-12-186-7345
Seal Inserter

121867345
99374011: RNCC: 3 | RNVC: 2
416290: RNCC: 5 | RNVC: 9
416290: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-359-4746
Bearing And Bushing Inserter

123594746
T622P3003150: RNCC: 3 | RNVC: 2

10 Feb 2003

5120-12-181-8134
Montierwerk Huelse

121818134
VW421: RNCC: 3 | RNVC: 9

17 Dec 1979

5120-12-380-5051
Seal Inserter

123805051
1878256881: RNCC: 3 | RNVC: 2

4 Nov 2009

5120-12-159-5787
Pliers

121595787
312589013700: RNCC: 3 | RNVC: 2
3125890137: RNCC: 5 | RNVC: 2
3125890137: RNCC: 5 | RNVC: 2
312589013700: RNCC: 5 | RNVC: 2
312 589 01 37 00: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-391-5511
Hand Hammer

123915511
5077030004: RNCC: 3 | RNVC: 2
5077.03-4: RNCC: 5 | RNVC: 2

19 Mar 2013

5120-12-363-8848
Schluessel

123638848
112898: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-159-9705
Mechanical Puller

121599705
352589003300: RNCC: 3 | RNVC: 2
3525890033: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-345-5260
Swivel Knob Jeweler's Screwdriver Set

123455260
25097198: RNCC: 3 | RNVC: 2

26 Mar 1998

5120-12-120-9673

5120-12-365-5402
Flat Tip Screwdriver

123655402
47211080-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-364-5654
Open End Box Wrench

123645654
41081719-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-382-7454
Cross Tip Screwdriver

123827454
46651001-TCS: RNCC: 3 | RNVC: 2

4 Aug 2010

5120-12-363-2366
Piston Ring Expander

123632366
F30378006: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-325-0817
Rotating Members Aligning Tool

123250817
52820-W23: RNCC: 3 | RNVC: 2

30 Apr 1991

5120-12-392-6640
Torque Wrench Adapter

123926640
CTP40702G001: RNCC: 3 | RNVC: 2

26 Jun 2013

5120-12-314-1593
Ausdrueckwerkzeug

123141593
VY921024: RNCC: 3 | RNVC: 2

14 Jun 1988

5120-12-319-3638
Mechanical Puller

123193638
99346005: RNCC: 3 | RNVC: 2

26 Sep 1989

5120-12-340-4882
Electronic Equipment Alignment Tool

123404882
1-552: RNCC: 3 | RNVC: 2

23 Apr 1996

5120-12-316-4854
Torque Wrench Adapter

123164854
510035: RNCC: 2 | RNVC: 9

19 Jan 1989

5120-12-363-2375
Bearing And Bushing Inserter

123632375
F30377889: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-374-3695
Socket Wrench Extension

123743695
13010005-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-171-0562
Dorn

121710562
321589021500: RNCC: 3 | RNVC: 2

1 Sep 1977

5120-12-191-8737
Bearing And Bushing Inserter

121918737
66642500: RNCC: 3 | RNVC: 2
E671-M13: RNCC: 5 | RNVC: 2

15 Mar 1982

5120-12-127-2812
Mechanical Puller

121272812
WU53: RNCC: 3 | RNVC: 2
WU53: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-152-4339
Endverbind Spanner

121524339
510321: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-127-3884

5120-12-364-6767
Drive Pin Punch

123646767
70090005-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-141-2960
Fixed Open End Wrench Set

121412960
571A636B: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-163-6100
Einbauwerkzeug

121636100
105-60701W4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-327-7378
Plier Clamp

123277378
482-AL: RNCC: 3 | RNVC: 2

25 Feb 1992

5120-12-358-8663
Pliers

123588663
80996066057: RNCC: 3 | RNVC: 2

22 Nov 2002

5120-12-379-0081
Hand Rivet Set Assortment

123790081
105REMKIT: RNCC: 3 | RNVC: 2

15 Jun 2009

5120-12-363-4339
Torque Wrench

123634339
7147120: RNCC: 3 | RNVC: 2

15 Jun 2004

5120-12-331-6058
Seal Inserter

123316058
80996170143: RNCC: 3 | RNVC: 2
80.99617.0143: RNCC: 5 | RNVC: 2
V1016: RNCC: 5 | RNVC: 2

27 May 1993

5120-12-126-5435
Vorst Treib- Dorn

121265435
4015890039: RNCC: 3 | RNVC: 2
4015890039: RNCC: 3 | RNVC: 9
401589003900: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-390-1213
Preformed Packing Inserter

123901213
904589051500: RNCC: 3 | RNVC: 2

8 Oct 2012

Load More Results