What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 29 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 29 of 62

5120-12-171-7497
Socket Wrench Set

121717497
NO PRIMARY REF 12-171-7497: RNCC: 3 | RNVC: 2
134623: RNCC: 5 | RNVC: 9
1945NBST: RNCC: 5 | RNVC: 9

10 Nov 1977

5120-12-139-9503
Nietkopfsetzer

121399503
100129-9200-20: RNCC: 3 | RNVC: 2
100129-9200.20: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-158-9757
Electronic Equipment Alignment Tool

121589757
770G: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-1418
Hand Rivet Set

121261418
NO PRIMARY REF 12-126-1418: RNCC: 3 | RNVC: 2
574E002-7: RNCC: 5 | RNVC: 9
B7DIN6434: RNCC: 5 | RNVC: 9
DIN6434-B7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-7632
Reparaturklammer

121777632
80-7-25-54: RNCC: 3 | RNVC: 2
ST42904-411000: RNCC: 5 | RNVC: 2

19 Feb 1979

5120-12-323-5156
Seal Inserter

123235156
117-45021.W14: RNCC: 3 | RNVC: 2

3 Dec 1990

5120-12-163-3273
Dorn

121633273
92010394: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-329-4315
Spanner Wrench

123294315
081-140173-000-0: RNCC: 2 | RNVC: 2
081-140173-000-0: RNCC: 3 | RNVC: 2

19 Aug 1992

5120-12-315-4871
Socket Head Screw Key Set

123154871
2100/7R: RNCC: 3 | RNVC: 2
57862: RNCC: 5 | RNVC: 2

29 Oct 1988

5120-12-145-9302
Piston Ring Expander

121459302
837589003700: RNCC: 3 | RNVC: 2
8375890037/00: RNCC: 5 | RNVC: 2
8375890037/00: RNCC: 5 | RNVC: 2
8375890037: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-311-1922
Carpenters' Pincers

123111922
03399032: RNCC: 3 | RNVC: 9

4 Aug 1987

5120-12-345-3731
Montierhuelse

123453731
F3 0372162: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-140-9824
Abdrueckspindel

121409824
528: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-345-3725
Drift Punch

123453725
F3 0276046: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-384-3252
Mechanical Puller

123843252
F6782138: RNCC: 3 | RNVC: 2

14 Feb 2011

5120-12-166-2275
Stuetzbuegel

121662275
1681240038: RNCC: 3 | RNVC: 2
KDEP2883: RNCC: 5 | RNVC: 9

13 Aug 1976

5120-12-390-4387
Rotat Holding Tool

123904387
F6271442: RNCC: 3 | RNVC: 2

13 Nov 2012

5120-12-356-0538
Socket Wrench Set

123560538
96513230: RNCC: 3 | RNVC: 2

16 Jan 2002

5120-12-329-0382
Socket Head Screw Key

123290382
60810310: RNCC: 3 | RNVC: 2

11 Jul 1992

5120-12-157-6775
Kabelschuhh Matrize

121576775
B120WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-387-7025
Bearing Staking Installation Tool

123877025
F6553649: RNCC: 3 | RNVC: 2

25 Jan 2012

5120-12-145-3554
Spanner Wrench

121453554
5072664: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-094-1289

5120-12-364-4733
Socket Wrench Crowfoot Attachment

123644733
02210018-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-344-5994
Ge Montierwerkzeug

123445994
1X56136451: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-343-1053
Swivel Knob Jeweler's Screwdriver

123431053
240 201 90: RNCC: 3 | RNVC: 2

29 Apr 1997

5120-12-130-6543
Einstellnadel

121306543
2701262800: RNCC: 3 | RNVC: 2
WZ10: RNCC: 3 | RNVC: 2
LG142628: RNCC: 5 | RNVC: 2
27012 62800: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-180-2926
Fixed Open End Wrench Set

121802926
450-8ARDV: RNCC: 3 | RNVC: 9

31 Aug 1979

5120-12-351-8087
Montierdorn

123518087
N/W/100-102915/4+7: RNCC: 3 | RNVC: 2
N/W/200-102915/15: RNCC: 5 | RNVC: 9

28 Aug 2000

5120-12-356-8260
Lifting Pneumatic Bag

123568260
131 08 000: RNCC: 3 | RNVC: 2
TYP V54: RNCC: 5 | RNVC: 2

9 Apr 2002

5120-12-380-2949
Vi Holding Fixture

123802949
103120: RNCC: 3 | RNVC: 2

16 Oct 2009

5120-12-140-5561
Box Wrench

121405561
DIN897-19X22: RNCC: 2 | RNVC: 2
23-19X22: RNCC: 3 | RNVC: 2
19X22DIN897: RNCC: 5 | RNVC: 2
41071922: RNCC: 5 | RNVC: 2
169126203: RNCC: 5 | RNVC: 2
1408110011: RNCC: 5 | RNVC: 9
625-19X22: RNCC: 5 | RNVC: 9
19X22DIN897GALNI8: RNCC: 5 | RNVC: 9
7101-86-01-16: RNCC: 5 | RNVC: 9
7101-86-01.16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-178-3102
Montagewerkzeug

121783102
NO PRIMARY REF 12-178-3102: RNCC: 3 | RNVC: 2
0013201: RNCC: 5 | RNVC: 9

12 Apr 1979

5120-12-354-0315
Seal Inserter

123540315
714589011500: RNCC: 3 | RNVC: 2
714 589 01 15 00: RNCC: 5 | RNVC: 2

29 May 2001

5120-12-337-2248
We Montierwerkzeug

123372248
11.49009-0067: RNCC: 3 | RNVC: 2
020.017: RNCC: 5 | RNVC: 2
020.017: RNCC: 5 | RNVC: 9
11.49009-0067: RNCC: 5 | RNVC: 9

3 Feb 1995

5120-12-327-1294
Socket Head Screw Key Set

123271294
2100A/13P: RNCC: 3 | RNVC: 2
4439330006: RNCC: 5 | RNVC: 2

5 Dec 1991

5120-12-320-5812
Box Wrench

123205812
450-10X12: RNCC: 3 | RNVC: 2
71111237847: RNCC: 5 | RNVC: 2

26 Jan 1990

5120-12-374-5159
Socket Wrench Handle

123745159
246-20783: RNCC: 3 | RNVC: 2
246-20783: RNCC: 5 | RNVC: 9

21 Feb 2008

5120-12-326-0186
Bearing And Bushing Inserter

123260186
601589091500: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-325-9029
Combination Box And Open End Wrench

123259029
2060170: RNCC: 3 | RNVC: 2

22 Jul 1991

5120-12-195-3696
Aufdrueckwerkzeug

121953696
80.99606.0042: RNCC: 3 | RNVC: 2

15 Feb 1983

5120-12-137-3105

5120-12-365-9729
Socket Head Screw Key

123659729
43270015-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-312-9579
Pin Inserter

123129579
318269: RNCC: 3 | RNVC: 2

22 Feb 1988

5120-12-385-3084
Hand Hammer

123853084
53.000.027: RNCC: 3 | RNVC: 2
53.000.027: RNCC: 5 | RNVC: 2

20 May 2011

5120-12-362-5494
Socket Wrench Socket

123625494
103 589 02 09 00: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-12-380-6256
Socket Wrench Adapter-Extension

123806256
T80092329: RNCC: 3 | RNVC: 2

13 Nov 2009

5120-12-363-4338
Oelfilt Schluessel

123634338
7145714: RNCC: 3 | RNVC: 2

15 Jun 2004

5120-12-364-4728
Torque Wrench Adapter

123644728
02181008-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-365-5303
Electronic Equipment Alignment Tool

123655303
T4856B: RNCC: 3 | RNVC: 2

12 Jan 2005

5120-12-330-3654
Face Spanner Wrench Socket

123303654
2653-990935.00: RNCC: 2 | RNVC: 2
2653-990935.00: RNCC: 3 | RNVC: 2

8 Dec 1992

5120-12-374-5478
Pike Pole

123745478
6X0012243: RNCC: 3 | RNVC: 2

25 Feb 2008

5120-12-362-3139
Auf Ersatzteilsatz

123623139
3500 0018 00: RNCC: 3 | RNVC: 2
3500001800: RNCC: 5 | RNVC: 2

5 Feb 2004

5120-12-123-5094
Open End Wrench

121235094
NO PRIMARY REF 12-123-5094: RNCC: 3 | RNVC: 2
105050: RNCC: 5 | RNVC: 9
1932WM14X13: RNCC: 5 | RNVC: 9
00750: RNCC: 5 | RNVC: 9
1203110014: RNCC: 5 | RNVC: 9
330-14X13: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-363-8417
Bearing And Bushing Inserter

123638417
T671P5001213: RNCC: 3 | RNVC: 2

30 Jul 2004

5120-12-127-8797
Scratch Awl

121278797
NO PRIMARY REF 12-127-8797: RNCC: 3 | RNVC: 2
104497: RNCC: 5 | RNVC: 9
1823: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-168-6772
Abziehvorrichtung

121686772
4900073-003000: RNCC: 3 | RNVC: 2
4900073-003000: RNCC: 5 | RNVC: 2
104412U: RNCC: 5 | RNVC: 9
104412U: RNCC: 5 | RNVC: 9

28 Mar 1977

5120-12-151-8400
Socket Head Screw Key

121518400
NM290-64: RNCC: 3 | RNVC: 2
NM290-64: RNCC: 5 | RNVC: 9
BD7001E114: RNCC: 5 | RNVC: 9
1292001-001204-114: RNCC: 5 | RNVC: 9
1292001-001204.114: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-327-7260
Spanner Wrench

123277260
6506508: RNCC: 3 | RNVC: 2
650.6508: RNCC: 5 | RNVC: 2

24 Feb 1992

5120-12-352-3171
Hand Hydraulic Jack

123523171
70100901: RNCC: 3 | RNVC: 2

8 Nov 2000

5120-12-326-0179
Bearing And Bushing Inserter

123260179
117589003100: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-021-6824

5120-12-377-5169
Socket Wrench Socket

123775169
F30375985: RNCC: 3 | RNVC: 2

21 Jan 2009

5120-12-092-2275

5120-12-359-9462
Rivet Bucking Bar

123599462
1000042-195420: RNCC: 3 | RNVC: 2

24 Mar 2003

5120-12-325-9032
Combination Box And Open End Wrench

123259032
2060220: RNCC: 3 | RNVC: 2

22 Jul 1991

5120-12-026-5685

5120-12-194-0194
Face Spanner Wrench Socket

121940194
3S55130-0000: RNCC: 3 | RNVC: 2
3S55130-0000-403: RNCC: 3 | RNVC: 2
3S55130-0000-405: RNCC: 5 | RNVC: 2
3S55130-0000-407: RNCC: 5 | RNVC: 2
MAGERD 1531: RNCC: 5 | RNVC: 9

23 Sep 1982

5120-12-126-6235
Drive Pin Punch

121266235
434BECU8: RNCC: 3 | RNVC: 2
434BECU8: RNCC: 3 | RNVC: 9
253-8MM: RNCC: 5 | RNVC: 9
1891-8MM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-187-6268
Plier Wrench

121876268
5880006: RNCC: 3 | RNVC: 2
2574: RNCC: 5 | RNVC: 9

21 Apr 1981

5120-12-364-4719
Torque Wrench Adapter

123644719
58253005-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-313-5552
Mechanical Puller Attachment

123135552
80996060256: RNCC: 3 | RNVC: 2
80.99606.0256: RNCC: 5 | RNVC: 2

15 Apr 1988

5120-12-094-1263

5120-12-122-2903
Socket Wrench

121222903
10846: RNCC: 3 | RNVC: 2
0005810102: RNCC: 3 | RNVC: 2
045-5A10846: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-127-4587
Box Wrench

121274587
NO PRIMARY REF 12-127-4587: RNCC: 3 | RNVC: 2
1A12: RNCC: 5 | RNVC: 9
1A12: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-4530
Drain Plug Wrench

121714530
R523: RNCC: 3 | RNVC: 2

13 Oct 1977

5120-12-383-6410
Open End Wrench

123836410
1216207: RNCC: 3 | RNVC: 2

17 Nov 2010

5120-12-393-5518
Socket Wrench

123935518
1575025: RNCC: 3 | RNVC: 2
01575025: RNCC: 5 | RNVC: 2

24 Sep 2013

5120-12-126-5546

5120-12-345-7282
Torque Wrench Adapter

123457282
OP242: RNCC: 3 | RNVC: 2

21 Apr 1998

5120-12-392-9547
Hand Hammer

123929547
10776: RNCC: 3 | RNVC: 2
70130010: RNCC: 5 | RNVC: 2

25 Jul 2013

5120-12-383-6921
Ku Montierwerkzeug

123836921
1X56.095.082: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-12-383-6069
Torque Screwdriver

123836069
100 992 16: RNCC: 3 | RNVC: 2
4007157520418: RNCC: 5 | RNVC: 2

12 Nov 2010

5120-12-390-4560
Open End Wrench

123904560
BE 0018: RNCC: 3 | RNVC: 2

14 Nov 2012

5120-12-365-9184
Socket Wrench

123659184
T4840X 25: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-384-0414
Mechanical Puller

123840414
7098049: RNCC: 3 | RNVC: 2

13 Jan 2011

5120-12-353-8485
Socket Wrench

123538485
001589490900: RNCC: 3 | RNVC: 2
001589490900: RNCC: 5 | RNVC: 2
001589490900: RNCC: 5 | RNVC: 2

15 May 2001

5120-12-345-2692
Mechanical Puller

123452692
Y4097956: RNCC: 3 | RNVC: 2

20 Feb 1998

5120-12-368-9560
Screwdriver Bit

123689560
1455-IS6,5: RNCC: 3 | RNVC: 2
00.45.06.44: RNCC: 5 | RNVC: 2

9 May 2006

5120-12-374-4058
Mounting Lever

123744058
115589035900: RNCC: 3 | RNVC: 2

14 Feb 2008

5120-12-310-2700
Spanner Wrench

123102700
11198903405: RNCC: 3 | RNVC: 9

30 Apr 1987

5120-12-193-0152
Zwischenring

121930152
460589006300: RNCC: 3 | RNVC: 2
460 589 00 63 00: RNCC: 3 | RNVC: 2

14 Jun 1982

5120-12-324-5287
Mechanical Puller

123245287
957433000: RNCC: 3 | RNVC: 2

27 Feb 1991

5120-12-312-3820
Seal Inserter

123123820
80-10-3000-4: RNCC: 3 | RNVC: 2

22 Dec 1987

5120-12-370-1579
Blindni Mundstueck

123701579
7051328: RNCC: 3 | RNVC: 2

26 Sep 2006

5120-12-335-4101
Socket Wrench Socket

123354101
0852 5019: RNCC: 3 | RNVC: 2
8525019: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-370-1672
Flat Tip Screwdriver

123701672
64505: RNCC: 3 | RNVC: 2
01.71.85.16: RNCC: 5 | RNVC: 2
4001002645059: RNCC: 5 | RNVC: 2

27 Sep 2006

5120-12-139-5752
Box Wrench

121395752
518589170800: RNCC: 3 | RNVC: 2
5185891708: RNCC: 3 | RNVC: 2
026M00300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-370-1659
Flat Tip Screwdriver

123701659
66065: RNCC: 3 | RNVC: 2
4001002660656: RNCC: 5 | RNVC: 2
01.71.94.25: RNCC: 5 | RNVC: 2

27 Sep 2006

5120-12-345-3735
Schluessel

123453735
F6 277174: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-023-1450

5120-12-323-3679
Ku Montierwerkzeug

123233679
C7457-00-00: RNCC: 3 | RNVC: 2
7084063: RNCC: 5 | RNVC: 2
717589003100: RNCC: 5 | RNVC: 2

19 Nov 1990

5120-12-150-3950
Montagevorrichtung

121503950
VG95211-ML-121503950: RNCC: 2 | RNVC: 2
15001-08600W2: RNCC: 3 | RNVC: 2
15001-08600W2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-183-0993
Dorn

121830993
4190427: RNCC: 3 | RNVC: 2

20 Mar 1980

5120-12-391-3267
Plug Electrical Connector Extractor

123913267
1591: RNCC: 3 | RNVC: 2
74620041: RNCC: 5 | RNVC: 2

6 Mar 2013

5120-12-349-4018
Mechanical Puller

123494018
0986611085: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-384-1004
Cross Tip Screwdriver

123841004
50-PH1X35: RNCC: 3 | RNVC: 2

20 Jan 2011

5120-12-363-8709
Bearing And Bushing Inserter

123638709
T670P5001202: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-023-1419

5120-12-139-3017

5120-12-370-1412
Socket Wrench Socket

123701412
40D-7: RNCC: 3 | RNVC: 2
01030007: RNCC: 5 | RNVC: 2

25 Sep 2006

5120-12-195-9680
Socket Wrench Set

121959680
NO PRIMARY REF 12-195-9680: RNCC: 3 | RNVC: 2
110663: RNCC: 5 | RNVC: 9
8940Z: RNCC: 5 | RNVC: 9

9 May 1983

5120-12-193-3328
Blindni Mundstueck

121933328
349589: RNCC: 3 | RNVC: 2

12 Jul 1982

5120-12-146-3725

5120-12-140-1269

5120-12-140-7183
Socket Wrench Handle Bar

121407183
1264-1324: RNCC: 3 | RNVC: 2
1264-1324: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-375-0571
Mechanical Puller

123750571
001589383300: RNCC: 3 | RNVC: 2
001589383300: RNCC: 5 | RNVC: 2

17 Apr 2008

5120-12-138-5634

5120-12-345-3724
Mechanical Puller

123453724
Y4098727: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-336-2814
Socket Wrench Screwdriver Attachment

123362814
54KK-6: RNCC: 3 | RNVC: 2
6434506: RNCC: 5 | RNVC: 2
03280006: RNCC: 5 | RNVC: 2

7 Nov 1994

5120-12-183-9060
Drive Pin Punch

121839060
574D008-6: RNCC: 3 | RNVC: 9

29 May 1980

5120-12-352-3337
Drive Pin Punch

123523337
22015.0.00.100.00P0S.5: RNCC: 3 | RNVC: 2

8 Nov 2000

5120-12-364-2841
Socket Head Screw Key

123642841
05023120001: RNCC: 3 | RNVC: 2
354-5,0X80: RNCC: 5 | RNVC: 2
023120: RNCC: 5 | RNVC: 9

7 Sep 2004

5120-12-139-3128
T Oelfuelltrichter

121393128
820589426300: RNCC: 3 | RNVC: 2
8205894263: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-127-5020
Socket Wrench

30 May 1969

5120-12-093-7230

5120-12-314-4918
Pliers

123144918
3870: RNCC: 3 | RNVC: 2

13 Jul 1988

5120-12-373-4932
Socket Wrench Crowfoot Attachment

123734932
02211016: RNCC: 3 | RNVC: 2

8 Nov 2007

5120-12-150-3955
Abdrueckscheibe

121503955
1X46104942: RNCC: 3 | RNVC: 2
V104942: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-152-5604
Torque Wrench Adapter

121525604
20-16-0: RNCC: 3 | RNVC: 2
169125108: RNCC: 5 | RNVC: 2
7101-86-31-03: RNCC: 5 | RNVC: 9
7101-86-31.03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-172-6364
Socket Wrench Set

121726364
W339: RNCC: 2 | RNVC: 9
D19RNCS: RNCC: 3 | RNVC: 9
W34-1-19: RNCC: 5 | RNVC: 9
W34-2-19: RNCC: 5 | RNVC: 9
5120-00356: RNCC: 6 | RNVC: 9

31 Jan 1978

5120-12-380-6099
Open End Wrench

123806099
0156109131000: RNCC: 3 | RNVC: 2
156A-3/16X1/4: RNCC: 5 | RNVC: 2

12 Nov 2009

5120-12-197-4805
Hand Sheet Metal Seamer

121974805
1932-1: RNCC: 3 | RNVC: 2
12740: RNCC: 5 | RNVC: 2
5153730001: RNCC: 5 | RNVC: 2

25 Oct 1983

5120-12-314-2770
Montierhuelse

123142770
0852 8756: RNCC: 3 | RNVC: 2
8528756: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-176-0507

5120-12-150-5201
Mechanical Puller Step Plate

121505201
837589293300: RNCC: 3 | RNVC: 2
8375892933: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-365-0106
Cross Tip Screwdriver

123650106
4-621: RNCC: 3 | RNVC: 2

23 Nov 2004

5120-12-360-6058
Montage- Hebel

123606058
4000A-920100.001.0: RNCC: 2 | RNVC: 2
4000A-920100.001.0: RNCC: 3 | RNVC: 2

16 Jun 2003

5120-12-330-2837
Rack Bar Jack

123302837
1350.10.13.32: RNCC: 3 | RNVC: 2

26 Nov 1992

5120-12-327-1175
Mechanical Puller Attachment

123271175
393589003400: RNCC: 3 | RNVC: 2

3 Dec 1991

5120-12-335-3506
Mechanical Puller

123353506
4434380000: RNCC: 3 | RNVC: 2

11 Aug 1994

5120-12-322-9605
Bearing And Bushing Inserter And Remover

123229605
3.601.0.018.045.6: RNCC: 3 | RNVC: 2
1206 9469: RNCC: 5 | RNVC: 2

11 Oct 1990

5120-12-349-3929
Face Spanner Wrench Socket

123493929
2300211-990608.000.0: RNCC: 2 | RNVC: 2
2300211-990608.000.0: RNCC: 3 | RNVC: 2

9 Nov 1999

5120-12-133-5963
Jaw Cable Grip

121335963
2911: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-152-8891
Digging Pick

121528891
DIN6436-E1,5: RNCC: 2 | RNVC: 2
E1-5DIN6436: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-166-0402
Socket Wrench Socket

121660402
A7400DM-13: RNCC: 3 | RNVC: 2
109255: RNCC: 5 | RNVC: 2
182000: RNCC: 5 | RNVC: 2
7400DM13: RNCC: 5 | RNVC: 9

24 Jul 1976

5120-12-325-7857
Lamp Extractor

123257857
1.90900.007: RNCC: 3 | RNVC: 2
44.01896: RNCC: 5 | RNVC: 2

9 Jul 1991

5120-12-381-8973
Adjustable Wrench

123818973
0482000C: RNCC: 3 | RNVC: 2

15 Apr 2010

5120-12-380-8927
Socket Wrench Socket

123808927
40DL-5,5: RNCC: 3 | RNVC: 2
01240055: RNCC: 5 | RNVC: 2

10 Dec 2009

5120-12-307-0463
Mechanical Puller Adapter

123070463
4900059-752080.000.0: RNCC: 2 | RNVC: 2
4900059-752080.000.0: RNCC: 3 | RNVC: 2

30 Apr 1986

5120-12-392-9127
Adjustable Wrench

123929127
8074 C: RNCC: 3 | RNVC: 2

23 Jul 2013

5120-12-314-0565
Ratchet Wrench

123140565
41V19: RNCC: 3 | RNVC: 2
633941: RNCC: 5 | RNVC: 2

2 Jun 1988

5120-12-133-3214
Crimping Tool Die

121333214
05010: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-023-1428

5120-12-303-8489
Mechanical Puller Attachment

123038489
3B33-1-2: RNCC: 3 | RNVC: 2

8 May 1985

5120-12-139-2516
Abga Abdichtplatte

121392516
070M01205: RNCC: 3 | RNVC: 2
VM76348-5: RNCC: 5 | RNVC: 2
VQ76348-5: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-345-5149
Socket Wrench Socket

123455149
40DL-6: RNCC: 3 | RNVC: 2
01 24 00 06: RNCC: 5 | RNVC: 2

26 Mar 1998

5120-12-181-1314
Socket Wrench Socket

121811314
1088-9: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-323-8473
Socket Head Screw Key Set

123238473
161-K: RNCC: 3 | RNVC: 2

27 Dec 1990

5120-12-180-0800
Spanner Wrench

121800800
0705E100555-2: RNCC: 3 | RNVC: 2

17 Aug 1979

5120-12-362-5500
Drift Punch

123625500
140 589 12 15 00: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-12-387-4147
Retaining Ring Pliers Set

123874147
00 20 01 V02: RNCC: 3 | RNVC: 2
4003773069652: RNCC: 5 | RNVC: 2

13 Dec 2011

5120-12-362-3280
Torque Wrench Multiplier

123623280
STW393N: RNCC: 3 | RNVC: 2
53033930: RNCC: 5 | RNVC: 2

6 Feb 2004

5120-12-342-0533
Bearing And Bushing Inserter

123420533
314820: RNCC: 3 | RNVC: 2
314820: RNCC: 5 | RNVC: 2
0314820: RNCC: 5 | RNVC: 9

4 Dec 1996

5120-12-195-1560
Spanner Wrench

121951560
80.99603.0016: RNCC: 3 | RNVC: 2

18 Jan 1983

5120-12-147-3001
Box Wrench

121473001
DIN3521-10: RNCC: 2 | RNVC: 2
10DIN3521: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-384-8373
Slip Joint Pliers

123848373
46.000.125: RNCC: 3 | RNVC: 2

4 Apr 2011

5120-12-374-6993
Pull And Press Tool

123746993
F6345893: RNCC: 3 | RNVC: 2

7 Mar 2008

5120-12-335-4099
Face Spanner Wrench Socket

123354099
0852 5009: RNCC: 3 | RNVC: 2
8525009: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-120-0721
Coke Fork

121200721
NO PRIMARY REF 12-120-0721: RNCC: 3 | RNVC: 2
10X330-370DIN20130: RNCC: 5 | RNVC: 9
DIN20130KOHLEGABEL10X330/370: RNCC: 5 | RNVC: 9
KOHLEGABEL10X330/370DIN20130: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-172-2784
Spanner Wrench

121722784
335929-9011.000: RNCC: 3 | RNVC: 2
1240-10000W2: RNCC: 5 | RNVC: 2
1240-10000W2: RNCC: 5 | RNVC: 2
335929-9011.000: RNCC: 5 | RNVC: 9

10 Jan 1978

5120-12-314-2321
Boerdelwer Einsatz

123142321
4597-51-8: RNCC: 3 | RNVC: 2
1651/8: RNCC: 3 | RNVC: 2

17 Jun 1988

5120-12-382-1054
Riveter Stand

123821054
100251-1101V5REP(1): RNCC: 3 | RNVC: 2

10 May 2010

5120-12-070-0072

5120-12-123-5523
Socket Wrench

121235523
DIN659-9: RNCC: 2 | RNVC: 2
9DIN659: RNCC: 3 | RNVC: 2
3700149: RNCC: 5 | RNVC: 2
9DIN659: RNCC: 5 | RNVC: 2
5168K9: RNCC: 5 | RNVC: 9
9DIN659GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-303-8496
Mechanical Puller

123038496
3B33-7-2: RNCC: 3 | RNVC: 2

8 May 1985

5120-12-022-1107

5120-12-022-0358

5120-12-387-7225
Drift Punch

123877225
F30378754: RNCC: 3 | RNVC: 2

26 Jan 2012

5120-12-368-6619
Screwdriver Bit

123686619
3243-TX10: RNCC: 3 | RNVC: 2
00.45.18.56: RNCC: 5 | RNVC: 2

4 Apr 2006

5120-12-021-3529

5120-12-364-6799
Socket Wrench Socket

123646799
03010034-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-384-1697
Blind Riveter Nosepiece

123841697
7252067: RNCC: 3 | RNVC: 2

28 Jan 2011

5120-12-388-6939
Mechanical Puller Step Plate

123886939
030.258: RNCC: 3 | RNVC: 2
030.258: RNCC: 5 | RNVC: 2

16 Apr 2012

5120-12-384-3648
Bearing And Bushing Inserter

123843648
F6557113: RNCC: 3 | RNVC: 2

17 Feb 2011

5120-12-198-5060
Face Spanner Wrench Socket

121985060
393486: RNCC: 3 | RNVC: 2

3 Feb 1984

5120-12-335-9398
Mechanical Puller

123359398
0851 9651: RNCC: 3 | RNVC: 2
8519651: RNCC: 5 | RNVC: 2

4 Oct 1994

5120-12-385-4922
Plier Wrench

123854922
115.1035: RNCC: 3 | RNVC: 2
391129152102: RNCC: 6 | RNVC: 9

8 Jun 2011

5120-12-147-6103
Saug-Un Gewindedorn

121476103
WZ76: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-168-5273
Reiniger

121685273
2776017000: RNCC: 3 | RNVC: 2

18 Mar 1977

5120-12-133-2348

5120-12-044-4910

5120-12-171-2456
Arretierhebel

121712456
1X56131397: RNCC: 3 | RNVC: 2

21 Sep 1977

5120-12-382-4318
Mechanical Puller

123824318
80.861.02600.C01: RNCC: 3 | RNVC: 2

21 Jun 2010

5120-12-355-3954
Mechanical Puller

123553954
5555127: RNCC: 3 | RNVC: 2

9 Nov 2001

5120-12-385-4648
Mechanical Puller

123854648
F30374342: RNCC: 3 | RNVC: 2

7 Jun 2011

5120-12-044-4881

5120-12-195-5469
Hand Screw Jack

121955469
EL18BWB: RNCC: 3 | RNVC: 2
EL265BW: RNCC: 3 | RNVC: 2
2H23229: RNCC: 5 | RNVC: 2

9 Mar 1983

5120-12-194-3171

5120-12-335-0983
Torque Wrench

123350983
F30038382: RNCC: 3 | RNVC: 2

22 Jul 1994

5120-12-174-9053
Hand Screw Starter

121749053
52560112: RNCC: 3 | RNVC: 9
1856: RNCC: 3 | RNVC: 9
8065N4A: RNCC: 5 | RNVC: 9
132569: RNCC: 5 | RNVC: 9

7 Aug 1978

5120-12-161-3336
Open End Wrench

121613336
160-88607: RNCC: 3 | RNVC: 2
160-88607: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-005-0335

5120-12-023-0356

5120-12-188-2871
Montagevorrichtung

121882871
A.ZENTRIERVORR.DN150MITTELSCHWER: RNCC: 3 | RNVC: 2

24 Jun 1981

5120-12-386-8706
Dapping Punch

123868706
0.411.2962: RNCC: 3 | RNVC: 2
0.411.2962: RNCC: 5 | RNVC: 2

11 Oct 2011

5120-12-192-1291
Ausziehvorrichtung

121921291
4D19366: RNCC: 3 | RNVC: 2
4D19366: RNCC: 5 | RNVC: 2
4D19366: RNCC: 5 | RNVC: 2

24 Mar 1982

5120-12-365-9148
Socket Wrench

123659148
T4582 ESD: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-091-2912

5120-12-123-5116
Open End Wrench

121235116
NO PRIMARY REF 12-123-5116: RNCC: 3 | RNVC: 2
450-5X6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-387-4286
Crimping Tool Die

123874286
D25: RNCC: 3 | RNVC: 2

14 Dec 2011

5120-12-379-3330
Seal Inserter

123793330
4236 210 001: RNCC: 3 | RNVC: 2

14 Jul 2009

5120-12-137-4414

5120-12-192-1054
Einbauvorrichtung

121921054
5D20844: RNCC: 3 | RNVC: 2
5D20844: RNCC: 5 | RNVC: 2
5D20844: RNCC: 5 | RNVC: 2

23 Mar 1982

5120-12-368-9148
Ge Montierwerkzeug

123689148
21043085: RNCC: 3 | RNVC: 2

5 May 2006

5120-12-326-0279
Socket Wrench

123260279
06000001: RNCC: 3 | RNVC: 2
600-1: RNCC: 5 | RNVC: 2
N:600-1: RNCC: 5 | RNVC: 9

31 Jul 1991

5120-12-385-6932
Mechanical Puller Adapter

123856932
1X53 174 739/1: RNCC: 3 | RNVC: 2

30 Jun 2011

5120-12-192-1288
Fuehrungs- Buchse

121921288
4D16883: RNCC: 3 | RNVC: 2
4D16883: RNCC: 5 | RNVC: 2
4D16883: RNCC: 5 | RNVC: 2

24 Mar 1982

5120-12-349-9198
Montierhuelse

123499198
45.004.51.477: RNCC: 3 | RNVC: 2

26 Jan 2000

5120-12-372-5834
Tap Extractor

123725834
33-4C: RNCC: 3 | RNVC: 2
01.98.93.08: RNCC: 5 | RNVC: 2

1 Aug 2007

5120-12-373-7986
Spanner Wrench

123737986
10104330: RNCC: 3 | RNVC: 2

7 Dec 2007

5120-12-023-2534

5120-12-393-5607
Spanner Wrench

123935607
7186418: RNCC: 3 | RNVC: 2

24 Sep 2013

5120-12-391-2462
Preformed Packing Inserter

123912462
F6783521: RNCC: 3 | RNVC: 2

28 Feb 2013

5120-12-371-4259
Hand Hammer

123714259
5039.98.1500: RNCC: 3 | RNVC: 2
5039981500: RNCC: 5 | RNVC: 2

28 Mar 2007

5120-12-364-3464
Combination Box And Open End Wrench

123643464
40080606-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-352-2561
Socket Head Screw Key

123522561
TT 15: RNCC: 3 | RNVC: 2
364-T15X100: RNCC: 3 | RNVC: 2

30 Oct 2000

5120-12-044-4899

5120-12-180-0962
Socket Wrench Crowfoot Attachment

121800962
320-991109: RNCC: 3 | RNVC: 2

20 Aug 1979

5120-12-342-0488
Cross Tip Screwdriver

123420488
4723ESD PZD/SDV0X60: RNCC: 3 | RNVC: 2

4 Dec 1996

5120-12-345-3587
Socket Wrench Screwdriver Attachment

123453587
F3 0370317: RNCC: 3 | RNVC: 2

5 Mar 1998

5120-12-002-0656

5120-12-005-0193

5120-12-388-3651
Mechanical Puller Attachment

123883651
730589023300: RNCC: 3 | RNVC: 2

14 Mar 2012

5120-12-126-6430
Stakeholder Bench Plate

121266430
53640010: RNCC: 3 | RNVC: 2
53640: RNCC: 5 | RNVC: 2
5344: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-141-3639
Dich Einfuehrbuchse

121413639
WU70: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-092-3876

5120-12-325-1310
Box Wrench

123251310
1000173-991000.002.0: RNCC: 2 | RNVC: 2
1000173-991000.002.0: RNCC: 3 | RNVC: 2
DIN7444-48: RNCC: 5 | RNVC: 2

7 May 1991

5120-12-333-6819
Spanner Wrench

123336819
6.423-022.0: RNCC: 3 | RNVC: 2

26 Jan 1994

5120-12-337-1941
Mechanical Puller

123371941
11.49009-0071: RNCC: 3 | RNVC: 2
014.015: RNCC: 5 | RNVC: 2
014.015: RNCC: 5 | RNVC: 9
11.49009-0071: RNCC: 5 | RNVC: 9

31 Jan 1995

5120-12-352-8040
Schluessel

123528040
2 01716 49: RNCC: 3 | RNVC: 2
1510: RNCC: 5 | RNVC: 9

18 Dec 2000

5120-12-373-8957
Mechanical Puller Set

123738957
4532ST/5: RNCC: 3 | RNVC: 2

17 Dec 2007

5120-12-135-4096
Radzy Kolbenklammer

121354096
AW35963: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-332-9832
Mechanical Puller

123329832
6.226.0.690.504.6: RNCC: 3 | RNVC: 2
6.226.0.690.504.6: RNCC: 5 | RNVC: 9

18 Oct 1993

5120-12-365-9440
Electronic Equipment Alignment Tool

123659440
Z4856 1: RNCC: 3 | RNVC: 2

21 Feb 2005

5120-12-133-4522

5120-12-158-3516
Spanner Wrench

121583516
264-446: RNCC: 3 | RNVC: 2
264-446: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-338-1412
Socket Wrench Socket

123381412
4555N: RNCC: 3 | RNVC: 2
5719650013: RNCC: 5 | RNVC: 2

29 May 1995

5120-12-364-5656
Socket Wrench Crowfoot Attachment

123645656
02200012-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-137-4195

5120-12-384-9526
Solid Center Punch

123849526
162.0364: RNCC: 3 | RNVC: 2

13 Apr 2011

5120-12-364-9573
Swivel Knob Jeweler's Screwdriver

123649573
T4877XESDTX15X80: RNCC: 3 | RNVC: 2

18 Nov 2004

5120-12-364-3645
Fuse Puller

123643645
3NX1014: RNCC: 3 | RNVC: 2

15 Sep 2004

5120-12-120-6527

5120-12-161-4296
Electronic Equipment Alignment Tool

121614296
1712180104: RNCC: 3 | RNVC: 2
17121 80104: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-352-2327
Craftsman's Tweezers

123522327
5475R: RNCC: 3 | RNVC: 2
1086268: RNCC: 5 | RNVC: 2

26 Oct 2000

5120-12-133-4575

5120-12-185-0087
Craftsman's Tweezers

121850087
5469BR: RNCC: 3 | RNVC: 2

2 Sep 1980

5120-12-360-0234
Electrical Contact Remover

123600234
VG95236T04CB003: RNCC: 2 | RNVC: 2

28 Mar 2003

5120-12-341-0153
Socket Head Screw Key Set

123410153
760S-TX6: RNCC: 3 | RNVC: 2

17 Jul 1996

5120-12-700-4267
Flat Tip Screwdriver

127004267
SCHRAUBENDREHER NVA: RNCC: 2 | RNVC: 2

12 May 1992

5120-12-021-2673

5120-12-130-6240
Socket Wrench

121306240
WZ48: RNCC: 3 | RNVC: 2
0141855: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-180-9214
Machinist's Vise

121809214
51035020: RNCC: 3 | RNVC: 9

11 Oct 1979

5120-12-387-2445
Socket Head Screw Key

123872445
6362820: RNCC: 3 | RNVC: 2
4010886636282: RNCC: 5 | RNVC: 2
6362820: RNCC: 5 | RNVC: 2
4010886636282: RNCC: 5 | RNVC: 2
42 TX T15: RNCC: 5 | RNVC: 2
42 TX T15: RNCC: 5 | RNVC: 2

18 Nov 2011

5120-12-022-8153

5120-12-091-6440

5120-12-309-9440
Bearing And Bushing Inserter

123099440
117 589 00 3100: RNCC: 3 | RNVC: 2

20 Mar 1987

5120-12-342-6377
Woven Cable Grip

123426377
01925: RNCC: 3 | RNVC: 2

11 Mar 1997

5120-12-312-2173
Eindrueckwerkzeug

123122173
40-503: RNCC: 3 | RNVC: 2

4 Dec 1987

5120-12-021-8468

5120-12-194-4798
Spanner Wrench

121944798
S4-1601190: RNCC: 3 | RNVC: 2
S4-1601190: RNCC: 5 | RNVC: 9

8 Nov 1982

5120-12-357-0524
Open End Box Wrench

123570524
1949Z-3/8-7/16: RNCC: 3 | RNVC: 2
1055486: RNCC: 5 | RNVC: 2

26 Apr 2002

5120-12-335-2187
Mechanical Puller

123352187
NO PRIMARY REF 12-335-2187: RNCC: 3 | RNVC: 2
444.31-825-010: RNCC: 5 | RNVC: 9

27 Jul 1994

5120-12-368-7177
Socket Wrench Socket

123687177
771-L 9: RNCC: 3 | RNVC: 2
6130100: RNCC: 3 | RNVC: 2
03030009: RNCC: 3 | RNVC: 2
00.48.53.03: RNCC: 5 | RNVC: 2

10 Apr 2006

5120-12-150-3919
Face Spanner Wrench Socket

121503919
1X46090795: RNCC: 3 | RNVC: 2
V90795-3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-371-5475
Mechanical Puller Attachment

123715475
5176048: RNCC: 3 | RNVC: 2
541148: RNCC: 5 | RNVC: 2

17 Apr 2007

5120-12-342-2264
Seal Inserter

123422264
28F45080: RNCC: 3 | RNVC: 2

8 Jan 1997

5120-12-323-1193
Pedal Adjustment Tool Compressor

123231193
4990001: RNCC: 3 | RNVC: 2

24 Oct 1990

5120-12-382-0931
Spanner Wrench

123820931
15-7000: RNCC: 3 | RNVC: 2

7 May 2010

5120-12-304-1021

5120-12-126-1574
Rohr- Zange

121261574
NO PRIMARY REF 12-126-1574: RNCC: 3 | RNVC: 2
TGL 48-72334,320,OB 019: RNCC: 5 | RNVC: 9
B225DIN5246: RNCC: 5 | RNVC: 9
0808393462759: RNCC: 5 | RNVC: 9
4974-225: RNCC: 5 | RNVC: 9
573F001-225: RNCC: 5 | RNVC: 9
1393224126467019: RNCC: 5 | RNVC: 9
DIN5246-B225: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-196-2309
Socket Wrench Socket

121962309
DIN3124-S5,5X6,3L: RNCC: 2 | RNVC: 2
1011 5,5: RNCC: 3 | RNVC: 2
40L5,5: RNCC: 3 | RNVC: 2
20L-5,5: RNCC: 3 | RNVC: 2
6800 M 5,5: RNCC: 5 | RNVC: 9
6800M5,5: RNCC: 5 | RNVC: 9

15 Jun 1983

5120-12-329-4605
Driftpin

123294605
1013701: RNCC: 3 | RNVC: 2

21 Aug 1992

5120-12-388-8097
Repl Clamp Section

123888097
030.268: RNCC: 3 | RNVC: 2
030.268: RNCC: 5 | RNVC: 2

25 Apr 2012

5120-12-376-4657
Open End Wrench

123764657
233196: RNCC: 3 | RNVC: 2
233196: RNCC: 5 | RNVC: 2

2 Oct 2008

5120-12-094-0338

5120-12-192-7712
Socket Head Screw Key

121927712
116589030700: RNCC: 3 | RNVC: 2

24 May 1982

5120-12-343-7275
Swivel Knob Jeweler's Screwdriver

123437275
240 257 90: RNCC: 3 | RNVC: 2

17 Jul 1997

5120-12-366-5505
Pliers

123665505
3115160: RNCC: 3 | RNVC: 2

9 May 2005

5120-12-156-7210
Socket Wrench

121567210
109101701: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-190-6071
Haltevorrichtung

121906071
F6278206: RNCC: 3 | RNVC: 2
3465700031: RNCC: 5 | RNVC: 2
F620092278206: RNCC: 5 | RNVC: 9
F62278206: RNCC: 5 | RNVC: 9

7 Dec 1981

5120-12-363-9850
Bearing And Bushing Inserter And Remover

123639850
T671P5002271: RNCC: 3 | RNVC: 2

10 Aug 2004

5120-12-021-2655

5120-12-350-8344
Schluessel

123508344
955772: RNCC: 3 | RNVC: 2

26 May 2000

5120-12-377-4882
Torque Wrench

123774882
133148: RNCC: 3 | RNVC: 2

20 Jan 2009

5120-12-140-2231

5120-12-044-4937

5120-12-198-5360
Tap And Reamer Wrench

121985360
7001: RNCC: 3 | RNVC: 2

7 Feb 1984

5120-12-316-5896
Torque Wrench Adapter

123165896
510036: RNCC: 2 | RNVC: 9

26 Jan 1989

5120-12-343-5236
Montierdorn

123435236
V1409-T604: RNCC: 3 | RNVC: 2
V1409-T604: RNCC: 5 | RNVC: 2

1 Jul 1997

5120-12-174-6056
Inserted Hammer Face

121746056
TL5120-0126-A104: RNCC: 2 | RNVC: 2
3207080: RNCC: 3 | RNVC: 2
220780: RNCC: 5 | RNVC: 9

13 Jul 1978

5120-12-337-1924
Bearing And Bushing Inserter And Remover

123371924
11.49021-0335: RNCC: 3 | RNVC: 2
050.030: RNCC: 5 | RNVC: 2
050.030: RNCC: 5 | RNVC: 9
11.49021-0335: RNCC: 5 | RNVC: 9

31 Jan 1995

5120-12-382-1933
Socket Head Screw Key

123821933
0250050S: RNCC: 3 | RNVC: 2

20 May 2010

5120-12-021-2557

5120-12-362-1136
Hand Terminal Crimping Tool

123621136
80996250042: RNCC: 3 | RNVC: 2

12 Jan 2004

5120-12-135-1491
Mechanical Puller

121351491
802-008: RNCC: 3 | RNVC: 2
1708: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-4509
Open End Box Wrench

121714509
TL5120-0065-29: RNCC: 2 | RNVC: 2
1217/8X15/16: RNCC: 5 | RNVC: 9
1949Z7-8X15-16: RNCC: 5 | RNVC: 9
5120-0065-29: RNCC: 5 | RNVC: 9
5120-065-29: RNCC: 5 | RNVC: 9

13 Oct 1977

5120-12-190-6055
Montagevorrichtung

121906055
873589043100: RNCC: 3 | RNVC: 2

7 Dec 1981

5120-12-328-4263
Pin Inserter

123284263
F361130279931: RNCC: 3 | RNVC: 2
F30279931: RNCC: 5 | RNVC: 2

16 May 1992

5120-12-368-0281
Pole Raising Support

123680281
0254-99: RNCC: 3 | RNVC: 2

22 Nov 2005

5120-12-190-7848
Ring

121907848
80.99616.0059: RNCC: 3 | RNVC: 2
80996160059: RNCC: 3 | RNVC: 2

15 Dec 1981

5120-12-141-9784
Open End Wrench

121419784
571A203B7-8IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-381-5276
Flat Tip Screwdriver

123815276
500 557 10: RNCC: 3 | RNVC: 2
4007157536976: RNCC: 5 | RNVC: 2

1 Mar 2010

5120-12-094-1267

5120-12-126-1698

5120-12-140-2581
Hole Sheet Metal Holder

121402581
2071S80: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-330-5871
K Einstellwerkzeug

123305871
617589072100: RNCC: 3 | RNVC: 2

13 Jan 1993

5120-12-368-1179
Lamp Cap Extractor

123681179
JD5120121939380 -TCS: RNCC: 3 | RNVC: 2

12 Dec 2005

5120-12-174-5660

5120-12-381-8440
Wrench Extension Handle

123818440
BW-MXT3-SSLV-A: RNCC: 3 | RNVC: 2

9 Apr 2010

5120-12-392-1919
Pipe Wrench

123921919
2183-2: RNCC: 3 | RNVC: 2
4000896013760: RNCC: 5 | RNVC: 2

14 May 2013

5120-12-390-5655
Valve Holding Tool

123905655
2009063-9: RNCC: 3 | RNVC: 2
2009063-9: RNCC: 5 | RNVC: 2

23 Nov 2012

5120-12-355-3949
Abzieh- Und Aufdrue

123553949
5555203: RNCC: 3 | RNVC: 2

9 Nov 2001

5120-12-312-2161
Aufstec Schluessel

5120-12-369-7389
Sp Montierwerkzeug

123697389
405589041500: RNCC: 3 | RNVC: 2
7083641: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-314-1726
Mechanical Puller

123141726
0852 8755: RNCC: 3 | RNVC: 2
8528755: RNCC: 5 | RNVC: 2

15 Jun 1988

5120-12-091-6291

5120-12-342-6110
Crimping Tool Die

123426110
VG95236T11AA111: RNCC: 2 | RNVC: 2
MRP0853: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-311-0624
Ge Montierwerkzeug

123110624
337589023100: RNCC: 3 | RNVC: 2

22 Jul 1987

5120-12-023-1481

5120-12-385-7861
Socket Wrench Handle

123857861
5204: RNCC: 3 | RNVC: 2

7 Jul 2011

5120-12-181-8129
Druckstueck

121818129
VW402: RNCC: 3 | RNVC: 9

17 Dec 1979

5120-12-392-7405
Spanner Wrench

123927405
SEWZG012: RNCC: 3 | RNVC: 2

3 Jul 2013

5120-12-380-5199
Socket Wrench Socket

123805199
1878256896: RNCC: 3 | RNVC: 2

5 Nov 2009

5120-12-134-5105

5120-12-328-6474
Bearing And Bushing Inserter

123286474
F30279497: RNCC: 3 | RNVC: 2

11 Jun 1992

5120-12-331-6756
Flat Tip Screwdriver

123316756
0852 5001.001: RNCC: 3 | RNVC: 2
8525001.001: RNCC: 5 | RNVC: 2

7 Jun 1993

5120-12-339-9594
Bearing And Bushing Inserter And Remover

123399594
5069587: RNCC: 3 | RNVC: 2
698-460-0011: RNCC: 5 | RNVC: 2

6 Feb 1996

5120-12-307-3634
Socket Wrench Handle

123073634
4900247-900: RNCC: 2 | RNVC: 2
7872165: RNCC: 3 | RNVC: 2
7872-165: RNCC: 5 | RNVC: 2

10 Jun 1986

5120-12-391-9037
Socket Wrench Extension

123919037
405QR-6: RNCC: 3 | RNVC: 2
11011002: RNCC: 5 | RNVC: 2

17 Apr 2013

5120-12-319-6398
Mechanical Puller Attachment

123196398
23111-7221.01: RNCC: 2 | RNVC: 2
23111-7221.01: RNCC: 3 | RNVC: 2
1115781: RNCC: 5 | RNVC: 2
1115781: RNCC: 5 | RNVC: 9
23111-7221.01: RNCC: 5 | RNVC: 9
23111-7221.01: RNCC: 5 | RNVC: 9

20 Oct 1989

5120-12-093-7703

5120-12-023-1441

5120-12-091-4248

5120-12-383-2558
Seal Inserter

123832558
F30378872: RNCC: 3 | RNVC: 2

29 Sep 2010

5120-12-358-8978
Mechanical Puller Attachment

123588978
80996010187: RNCC: 3 | RNVC: 2
83091430195: RNCC: 5 | RNVC: 2

26 Nov 2002

5120-12-365-9436
Electronic Equipment Alignment Tool

123659436
T4843 20: RNCC: 3 | RNVC: 2

21 Feb 2005

5120-12-370-9485
Fixed Open End Wrench Set

123709485
536-600: RNCC: 3 | RNVC: 2

19 Jan 2007

5120-12-091-7729

5120-12-340-2895
Ru Montierwerkzeug

123402895
5189013: RNCC: 3 | RNVC: 2

21 Mar 1996

5120-12-382-3813
Socket Wrench

123823813
6700379: RNCC: 3 | RNVC: 2

14 Jun 2010

5120-12-094-0321

5120-12-193-1553
Spanner Wrench

121931553
460 589 01 31 00: RNCC: 3 | RNVC: 2
460589013100: RNCC: 3 | RNVC: 2

28 Jun 1982

5120-12-332-6138
Spanner Wrench

123326138
532117-8071.908: RNCC: 3 | RNVC: 2
532117-8071.908: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-324-3698
Bearing And Bushing Inserter

123243698
460589181500: RNCC: 3 | RNVC: 2

8 Feb 1991

5120-12-146-5157

5120-12-328-6463
Socket Wrench Socket

123286463
F30279385: RNCC: 3 | RNVC: 2
F362600279385: RNCC: 5 | RNVC: 2

11 Jun 1992

5120-12-328-3640
Dreh Haltewerkzeug

123283640
F6451943: RNCC: 3 | RNVC: 2

9 May 1992

5120-12-384-3625
Mounting Sleeve

123843625
F6557100: RNCC: 3 | RNVC: 2

17 Feb 2011

5120-12-333-5674
Seal Inserter

123335674
1841501: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-044-4902

5120-12-146-3729

5120-12-149-7863
Ko Einfuehr- Huelse

121497863
837589206100: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-177-6329
Montagevorrichtung

121776329
335600: RNCC: 3 | RNVC: 2
335600: RNCC: 3 | RNVC: 9
0335600: RNCC: 5 | RNVC: 9

9 Feb 1979

5120-12-328-5259
Pin Inserter And Remover

123285259
F361130149541: RNCC: 3 | RNVC: 2
F30149541: RNCC: 5 | RNVC: 2

27 May 1992

5120-12-343-3832
Seal Inserter

123433832
352589023100: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-368-6449
Open End Wrench

123686449
100-34X36: RNCC: 3 | RNVC: 2
00.24.70.45: RNCC: 5 | RNVC: 2

3 Apr 2006

5120-12-360-4959
Mechanical Puller Attachment

123604959
CBD30031P02: RNCC: 3 | RNVC: 2

27 May 2003

5120-12-352-1910
Socket Wrench Socket

123521910
TL5120-0132-E1: RNCC: 2 | RNVC: 2
770-LTXE10: RNCC: 3 | RNVC: 2
50TX-E10: RNCC: 3 | RNVC: 2
03270010: RNCC: 5 | RNVC: 2
00.50.41.94: RNCC: 5 | RNVC: 2

24 Oct 2000

5120-12-134-2637
Schluessel

121342637
027M04600: RNCC: 3 | RNVC: 2
VM61-376-12-063: RNCC: 3 | RNVC: 2
VM61376: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-3189
Zwischenring

121773189
23290-268180.002: RNCC: 2 | RNVC: 2
23290-268180.002: RNCC: 3 | RNVC: 2
23290-268180-002: RNCC: 5 | RNVC: 9
23290-268180.002: RNCC: 5 | RNVC: 9

29 Jan 1979

5120-12-181-7433
Gewindedorn

121817433
3552013: RNCC: 3 | RNVC: 2

14 Dec 1979

5120-12-363-4426
Seal Remover

123634426
142710: RNCC: 3 | RNVC: 2

16 Jun 2004

5120-12-371-7364
Socket Wrench Set

123717364
89TX: RNCC: 3 | RNVC: 2
98810908: RNCC: 5 | RNVC: 2

9 May 2007

5120-12-368-2601
Torque Wrench Adapter

123682601
58211008-TCS: RNCC: 3 | RNVC: 2

18 Jan 2006

5120-12-368-2131
Swivel Knob Jeweler's Screwdriver

123682131
47510005-TCS: RNCC: 3 | RNVC: 2

9 Jan 2006

5120-12-195-9626
Torque Wrench Adapter

121959626
P896887: RNCC: 3 | RNVC: 2
MAGERD 8023: RNCC: 5 | RNVC: 9

9 May 1983

5120-12-195-7179
Socket Head Screw Key

121957179
11.1080.105: RNCC: 3 | RNVC: 9

31 Mar 1983

5120-12-368-1024
Socket Head Screw Key

123681024
43260004-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-384-9298
Inserted Hammer Face

123849298
50.000.182: RNCC: 3 | RNVC: 2

11 Apr 2011

5120-12-313-4278
Zentrier- Ring

123134278
80996170145: RNCC: 3 | RNVC: 2
80.99617.0145: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-140-9691
Mechanical Puller

121409691
0976023101: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-2980
Kontakt- Reiniger

121262980
TWZ71A: RNCC: 3 | RNVC: 2
TWZ71A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-363-8712
Bearing And Bushing Inserter

123638712
T670P5001205: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-199-0770
Hand Terminal Crimping Tool

121990770
SL3A: RNCC: 3 | RNVC: 2
SL3A: RNCC: 5 | RNVC: 9

23 Mar 1984

5120-12-194-9852
Lamp Extractor

121949852
592.3706: RNCC: 3 | RNVC: 2
5923706: RNCC: 3 | RNVC: 2

27 Dec 1982

5120-12-172-6284
Pipe Vise And Stand

121726284
634B103-3: RNCC: 3 | RNVC: 9
2262GR4: RNCC: 5 | RNVC: 9

31 Jan 1978

5120-12-092-2277

5120-12-336-5852
Montierhuelse

123365852
0851 6667: RNCC: 3 | RNVC: 2
8516667: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-348-8293
Drift Punch

123488293
72.012-701.000:11: RNCC: 3 | RNVC: 2

25 Aug 1999

5120-12-153-4996
Vent Schraubstueck

121534996
CH1920-6: RNCC: 3 | RNVC: 2
6.0888.01.3.0108: RNCC: 5 | RNVC: 9
6-0888-01-3-0108: RNCC: 5 | RNVC: 9
CH1920-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-185-6166
Screwdriver Bit

121856166
2500001-382350.00.0: RNCC: 2 | RNVC: 2
2500001-382350.00.0: RNCC: 3 | RNVC: 2
2500001-382350-00-0: RNCC: 5 | RNVC: 2
2500001-382350-00-0: RNCC: 5 | RNVC: 9
2500001-382350.00.0: RNCC: 5 | RNVC: 9

21 Oct 1980

5120-12-312-3095
Lager- Und Einsatz

123123095
619-45.10.116-05: RNCC: 3 | RNVC: 2

15 Dec 1987

5120-12-163-6591
Einbauwerkzeug

121636591
26-21C1013P011: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-340-8872
Combination Box And Open End Wrench

123408872
190AF-2.1/2: RNCC: 3 | RNVC: 2
1900142: RNCC: 5 | RNVC: 2

28 Jun 1996

5120-12-391-0200
Socket Wrench Socket

123910200
2300559-970110.002.0: RNCC: 2 | RNVC: 2
2300559-970110.002.0: RNCC: 3 | RNVC: 2

15 Jan 2013

5120-12-199-2200
Hand Screw Starter

121992200
4-404: RNCC: 3 | RNVC: 2

5 Apr 1984

5120-12-326-0499
Clamp Base Bench Vise

123260499
2300232-973200.000.0: RNCC: 2 | RNVC: 2
2300232-973200.000.0: RNCC: 3 | RNVC: 2

2 Aug 1991

5120-12-127-2019

5120-12-190-6053
Halter

121906053
873589053100: RNCC: 3 | RNVC: 2

7 Dec 1981

5120-12-361-2276
Montierdorn

123612276
62621100: RNCC: 3 | RNVC: 2

5 Sep 2003

5120-12-349-4446
Schluessel

123494446
0039730401: RNCC: 3 | RNVC: 2

16 Nov 1999

5120-12-348-2850
Schluessel

123482850
5195014: RNCC: 3 | RNVC: 2
MAGERD G 652: RNCC: 5 | RNVC: 9

25 May 1999

5120-12-340-4881
Electronic Equipment Alignment Tool

123404881
1-551: RNCC: 3 | RNVC: 2

23 Apr 1996

5120-12-384-0377
Mounting Sleeve

123840377
F6784618: RNCC: 3 | RNVC: 2

13 Jan 2011

5120-12-131-3939
Open End Wrench

121313939
8071: RNCC: 3 | RNVC: 2
510069BAM8071: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-335-5152
Inspection Mirror

123355152
54165010: RNCC: 3 | RNVC: 2

25 Aug 1994

5120-12-140-2287

5120-12-332-3516
Hand Helical Spring Puller Hook

123323516
962 728: RNCC: 3 | RNVC: 2
340119: RNCC: 5 | RNVC: 2

3 Aug 1993

5120-12-382-1998
Retaining Ring Pliers

123821998
EH 0140: RNCC: 3 | RNVC: 2
01.57.80.66: RNCC: 5 | RNVC: 2

20 May 2010

5120-12-185-8690
Box Wrench

121858690
170300: RNCC: 3 | RNVC: 2
2250280: RNCC: 5 | RNVC: 2

6 Nov 1980

5120-12-158-1045
Dorn

121581045
SS2879-4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-356-6749
Socket Wrench Handle Bar

123566749
26RS-1: RNCC: 3 | RNVC: 2

21 Mar 2002

5120-12-126-1201
Drill Drift

121261201
DIN317-0: RNCC: 2 | RNVC: 2
017075: RNCC: 3 | RNVC: 2
0DIN317: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-332-6209
B Einstellwerkzeug

123326209
3255/1: RNCC: 3 | RNVC: 2

30 Aug 1993

5120-12-348-6093
Flat Tip Screwdriver

123486093
663000-2: RNCC: 3 | RNVC: 2
66360-2: RNCC: 5 | RNVC: 9

26 Jul 1999

5120-12-144-2095
Durchdrehvorrichtun

121442095
837589236300: RNCC: 3 | RNVC: 2
8375892363: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-333-8530
Bearing And Bushing Inserter And Remover

123338530
312589044300: RNCC: 3 | RNVC: 2

17 Feb 1994

5120-12-196-7605
Hand Hydraulic Jack Kit

121967605
NM554: RNCC: 3 | RNVC: 2
NM554: RNCC: 5 | RNVC: 9

11 Aug 1983

5120-12-311-7857
Screwdriver Bit Set And Handle

123117857
9717121005: RNCC: 3 | RNVC: 2
97171 21005: RNCC: 5 | RNVC: 9

16 Oct 1987

5120-12-197-7554
Seal Inserter

121977554
363589041500: RNCC: 3 | RNVC: 2
1X56136415: RNCC: 3 | RNVC: 2
363 589 04 15 00: RNCC: 5 | RNVC: 2
ZF 1X56 136415: RNCC: 5 | RNVC: 2
0535927: RNCC: 5 | RNVC: 2

21 Nov 1983

5120-12-339-9459
Torque Wrench

123399459
2634: RNCC: 3 | RNVC: 2
38211: RNCC: 5 | RNVC: 2

5 Feb 1996

5120-12-391-0540
Bearing Staking Installation Tool

123910540
F30378021: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-12-120-5124

5120-12-372-0930
Hand Terminal Crimping Tool

123720930
K5: RNCC: 3 | RNVC: 2

18 Jun 2007

5120-12-167-9546
Spanner Wrench

121679546
12709-21000W2: RNCC: 2 | RNVC: 2
335912-9011.000: RNCC: 3 | RNVC: 2
12709-21000W2: RNCC: 5 | RNVC: 2
12709-21000W2: RNCC: 5 | RNVC: 2
335912-9011.000: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-044-5039

5120-12-146-7097
Kolb Verlaengerung

121467097
U02062: RNCC: 3 | RNVC: 2
U02062: RNCC: 5 | RNVC: 9
U2062: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-166-0413
Socket Wrench Adapter

121660413
R6964A: RNCC: 3 | RNVC: 2
108995: RNCC: 5 | RNVC: 2

24 Jul 1976

5120-12-094-7159

5120-12-357-8948
Mechanical Puller

123578948
714 523 160: RNCC: 3 | RNVC: 2

8 Aug 2002

5120-12-369-7262
Seal Inserter

123697262
142660: RNCC: 3 | RNVC: 2
142660: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-139-3077

5120-12-173-5113
Spanner Wrench

121735113
532008G16W4: RNCC: 3 | RNVC: 2
532008G16W4: RNCC: 5 | RNVC: 2
532008G16W4: RNCC: 5 | RNVC: 9
532008G16W4: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-12-174-7230
Schleifapparat

121747230
M100: RNCC: 3 | RNVC: 9

25 Jul 1978

5120-12-120-7725

5120-12-371-7285
Ausdrueckwerkzeug

123717285
405589003300: RNCC: 3 | RNVC: 2

9 May 2007

5120-12-194-9071
Ratchet Wrench

121949071
31KR8: RNCC: 3 | RNVC: 2
625302: RNCC: 5 | RNVC: 2
625 302: RNCC: 5 | RNVC: 2

16 Dec 1982

5120-12-147-3189
Putty Knife

121473189
NM266: RNCC: 3 | RNVC: 2
NM266: RNCC: 5 | RNVC: 9
BDIN7217: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-7060
Mechanical Puller

123887060
113.218: RNCC: 3 | RNVC: 2
113.218: RNCC: 5 | RNVC: 2

17 Apr 2012

5120-12-363-8713
Bearing And Bushing Inserter

123638713
T670P5001206: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-135-2219
Spanner Wrench

121352219
499204-3136: RNCC: 3 | RNVC: 2
499204-3136: RNCC: 5 | RNVC: 2
499204-3136: RNCC: 5 | RNVC: 2
499204-3136: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-7739
Dorn

121767739
111880: RNCC: 3 | RNVC: 2
111880: RNCC: 3 | RNVC: 9
0111880: RNCC: 5 | RNVC: 9

18 Dec 1978

5120-12-197-1413
Oel- Sieb

121971413
62175: RNCC: 3 | RNVC: 2

26 Sep 1983

5120-12-193-2494
Open End Wrench

121932494
3638522048: RNCC: 3 | RNVC: 2
36385 22048: RNCC: 5 | RNVC: 9

5 Jul 1982

5120-12-349-8110
Socket Wrench

123498110
DIN904-L13: RNCC: 2 | RNVC: 2

12 Jan 2000

5120-12-193-6677
Werkzeugausstattung

121936677
71-71-139-004: RNCC: 3 | RNVC: 2

18 Aug 1982

5120-12-383-1064
Bearing And Bushing Inserter

123831064
F30271887: RNCC: 3 | RNVC: 2

14 Sep 2010

5120-12-191-8259
Electrical Connector Inserter

121918259
54172299: RNCC: 3 | RNVC: 2
54700199: RNCC: 3 | RNVC: 2

8 Mar 1982

5120-12-387-6477
Bearing And Bushing Inserter

123876477
T671P5002130: RNCC: 3 | RNVC: 2

19 Jan 2012

5120-12-391-0165
Seal Remover

123910165
F30379303: RNCC: 3 | RNVC: 2

15 Jan 2013

5120-12-384-3637
Socket Head Screw Key

123843637
05027206001: RNCC: 3 | RNVC: 2

17 Feb 2011

5120-12-137-8334

5120-12-140-9707

5120-12-156-1522
Mechanical Finger

121561522
NM327: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-366-6257
Socket Wrench Handle Bar

123666257
1000042-196600.03: RNCC: 3 | RNVC: 2

17 May 2005

5120-12-313-3996
Mechanical Puller Attachment

123133996
80996020027: RNCC: 3 | RNVC: 2
80.99602.0027: RNCC: 5 | RNVC: 2

29 Mar 1988

5120-12-126-5444
Radnab Druckstueck

121265444
0645891033: RNCC: 3 | RNVC: 2
0645891033: RNCC: 3 | RNVC: 9
064589103300: RNCC: 5 | RNVC: 2
064589103300: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-359-6697
Bearing And Bushing Inserter And Remover

123596697
T622P3006051: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-389-4707
Socket Head Screw Key Set

123894707
208 971 98: RNCC: 3 | RNVC: 2
4007157504685: RNCC: 5 | RNVC: 2

11 Jul 2012

5120-12-195-1499
Combination Box And Open End Wrench

121951499
0X18: RNCC: 3 | RNVC: 2
600NA-1/4: RNCC: 3 | RNVC: 2
1506120001: RNCC: 5 | RNVC: 9
600A-1/4: RNCC: 5 | RNVC: 9

18 Jan 1983

5120-12-145-9603
K Eindrueck- Huelse

121459603
1365891439: RNCC: 3 | RNVC: 2
136589143900: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-311-4669
Hand Scissors Jack

123114669
919308001: RNCC: 3 | RNVC: 2
811011031A: RNCC: 3 | RNVC: 2

7 Sep 1987

5120-12-374-6682
Mounting Punch

123746682
F6458854: RNCC: 3 | RNVC: 2

5 Mar 2008

5120-12-332-8123
Montageblock Griff

123328123
0851 8908.004: RNCC: 3 | RNVC: 2

22 Sep 1993

5120-12-370-9436
Machinist's Vise

123709436
10814 UND 10616: RNCC: 3 | RNVC: 2

18 Jan 2007

5120-12-332-6133
Spanner Wrench

123326133
532113-8196.902: RNCC: 3 | RNVC: 2
532113-8196.902: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-335-4097
Face Spanner Wrench Socket

123354097
0852 3004: RNCC: 3 | RNVC: 2
8523004: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-181-7750
Open End Wrench

121817750
VW277: RNCC: 3 | RNVC: 9

14 Dec 1979

5120-12-315-4356
Mechanical Puller

123154356
4986041: RNCC: 3 | RNVC: 2

21 Oct 1988

5120-12-362-7961
Socket Head Screw Key

123627961
ISO2936-17L: RNCC: 2 | RNVC: 2
07153130: RNCC: 3 | RNVC: 2

1 Apr 2004

5120-12-176-1095
Auszieher

121761095
VW 10-221: RNCC: 3 | RNVC: 2
10-221: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-310-5404
Lager- Und B Griff

123105404
80996170129: RNCC: 3 | RNVC: 2
80.99617.0129: RNCC: 5 | RNVC: 2

29 May 1987

5120-12-316-9520
Socket Wrench Handle Bar

123169520
8-7302.00: RNCC: 2 | RNVC: 2
8-7302.00: RNCC: 3 | RNVC: 2
9861566: RNCC: 5 | RNVC: 2
8-7302.00: RNCC: 5 | RNVC: 9
9861566: RNCC: 5 | RNVC: 9

28 Feb 1989

5120-12-130-7394
Ratchet Screwdriver

121307394
135AS: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-134-5112

5120-12-330-0171
Schluessel

123300171
9689160212: RNCC: 3 | RNVC: 2
91729490: RNCC: 5 | RNVC: 2

22 Oct 1992

5120-12-386-7473
Spanner Wrench

123867473
W819200: RNCC: 3 | RNVC: 2

28 Sep 2011

5120-12-331-6241
Seal Remover

123316241
80996020127: RNCC: 3 | RNVC: 2
80.99602.0127: RNCC: 5 | RNVC: 2
V1140: RNCC: 5 | RNVC: 2

1 Jun 1993

5120-12-328-6970
Ge Montierwerkzeug

123286970
Y4276038: RNCC: 3 | RNVC: 2
Y414018276038: RNCC: 5 | RNVC: 2

16 Jun 1992

5120-12-199-5562
Screw Thread Insert Inserter

121995562
SRM 0812W: RNCC: 3 | RNVC: 2
SRM 0812W: RNCC: 5 | RNVC: 9

11 May 1984

5120-12-343-8146
Hand Pipe And Sewer Auger

123438146
7.2000: RNCC: 3 | RNVC: 2

31 Jul 1997

5120-12-375-0433
Flat Tip Screwdriver

123750433
00824: RNCC: 3 | RNVC: 2
320N-4,5X125: RNCC: 5 | RNVC: 2

16 Apr 2008

5120-12-181-1313
Socket Wrench Socket

121811313
1088-8: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-199-7895

5120-12-123-5105

5120-12-304-3534
Hand Rivet Set

123043534
602589003900: RNCC: 3 | RNVC: 2
000589584300: RNCC: 5 | RNVC: 9

10 Jul 1985

5120-12-141-3637
Mechanical Puller

121413637
V126464: RNCC: 3 | RNVC: 2
V53735: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-358-7782
Bearing And Bushing Inserter

123587782
80996330007: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-023-1445

5120-12-023-1487

5120-12-091-7160

5120-12-363-6158
Drive Pin Punch

123636158
T631P3005130: RNCC: 3 | RNVC: 2

9 Jul 2004

5120-12-197-7767
We Montierwerkzeug

121977767
620589001400: RNCC: 3 | RNVC: 2
620 589 00 14 00: RNCC: 5 | RNVC: 2

22 Nov 1983

5120-12-390-2136
Mechanical Puller Attachment

123902136
F6558507: RNCC: 3 | RNVC: 2

17 Oct 2012

5120-12-181-5807
Abdrueckvorrichtung

121815807
312589023500AND312589061500: RNCC: 3 | RNVC: 9

3 Dec 1979

5120-12-310-2906
Socket Wrench

123102906
0580-26: RNCC: 3 | RNVC: 2
27558220160: RNCC: 5 | RNVC: 2
98046042660: RNCC: 5 | RNVC: 2

6 May 1987

5120-12-311-0947
Seal Inserter

123110947
620589021500: RNCC: 3 | RNVC: 2

24 Jul 1987

5120-12-126-4931
Sheet Metalworking Stake

121264931
631B194: RNCC: 3 | RNVC: 2
5067: RNCC: 5 | RNVC: 9

30 May 1969

Load More Results