What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 26 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 26 of 62

5120-12-387-0301
Torque Wrench Set

123870301
4920-28746: RNCC: 3 | RNVC: 2
4920-28746: RNCC: 6 | RNVC: 9

27 Oct 2011

5120-12-325-5269
Inspection Mirror

123255269
470-21: RNCC: 3 | RNVC: 2

13 Jun 1991

5120-12-155-9382
Flat Tip Screwdriver

121559382
NM011-8: RNCC: 3 | RNVC: 2
NM011-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-366-2186
Socket Wrench

123662186
426-6: RNCC: 3 | RNVC: 2

22 Mar 2005

5120-12-123-5994
Socket Wrench Socket

121235994
47A3-8: RNCC: 3 | RNVC: 2
02440024: RNCC: 5 | RNVC: 2
7410DZ 3-8: RNCC: 5 | RNVC: 9
7410DZ3-8: RNCC: 5 | RNVC: 9
A7410DZ-3/8: RNCC: 5 | RNVC: 9
109520: RNCC: 5 | RNVC: 9
182042: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-1783
Hand Sheet Metal Groover

121741783
631B101-4: RNCC: 3 | RNVC: 9
2279B4: RNCC: 5 | RNVC: 9

9 Jun 1978

5120-12-384-0884
Vise Jaw Set

123840884
P-0334-12 SP: RNCC: 3 | RNVC: 2
P-0334-12 SP: RNCC: 5 | RNVC: 2

20 Jan 2011

5120-12-374-6535
M Indentation Tool

123746535
F30374200: RNCC: 3 | RNVC: 2

4 Mar 2008

5120-12-196-0412
Spanner Wrench

121960412
4982037: RNCC: 3 | RNVC: 2
MAGERD 0565: RNCC: 5 | RNVC: 9

24 May 1983

5120-12-342-9096
Socket Wrench Set

123429096
A7440DM: RNCC: 3 | RNVC: 2
1825461: RNCC: 5 | RNVC: 2

15 Apr 1997

5120-12-133-2707
Oe Stanz- Stempel

121332707
STPLL17: RNCC: 3 | RNVC: 2
STPLL17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-3451
Socket Wrench Adapter

123643451
11180010-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-364-0848
Dreh Haltewerkzeug

123640848
F6552426: RNCC: 3 | RNVC: 2
M55.093.029: RNCC: 5 | RNVC: 2
(241)A4249M55.093.029: RNCC: 8 | RNVC: 2

19 Aug 2004

5120-12-336-1036
Socket Wrench Set

123361036
63910: RNCC: 3 | RNVC: 2

25 Oct 1994

5120-12-131-5991
Hand Blind Riveter

121315991
SAI/G27: RNCC: 3 | RNVC: 2
5120-01-393-1538: RNCC: 3 | RNVC: 2
7160-0004: RNCC: 5 | RNVC: 9
7166: RNCC: 5 | RNVC: 9
7166-0004: RNCC: 5 | RNVC: 9
7166-0051: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-392-5213
Spanner Wrench

123925213
CTP45370G001: RNCC: 3 | RNVC: 2

14 Jun 2013

5120-12-329-0408
Box Wrench

123290408
4200800: RNCC: 3 | RNVC: 2
420 0800: RNCC: 5 | RNVC: 2

11 Jul 1992

5120-12-126-4683
Electronic Equipment Alignment Tool

121264683
1700I: RNCC: 3 | RNVC: 2
108693: RNCC: 5 | RNVC: 9
5511: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-344-6002
Mechanical Puller

123446002
1X56115504: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-339-3092
Hand Terminal Crimping Tool

123393092
CRIMPFOX UR 10: RNCC: 3 | RNVC: 2
1203628: RNCC: 5 | RNVC: 2

8 Nov 1995

5120-12-332-5326
Aligning Punch

123325326
3190A: RNCC: 3 | RNVC: 2

18 Aug 1993

5120-12-155-8245
Socket Head Screw Key Set

121558245
1997M15T: RNCC: 3 | RNVC: 2
105946: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-330-9674
Socket Wrench Socket

123309674
8531631-1: RNCC: 3 | RNVC: 2

4 Mar 1993

5120-12-173-1714
Spanner Wrench

121731714
V7001-004-925-7: RNCC: 3 | RNVC: 2
V7001-004-925-7: RNCC: 5 | RNVC: 2

22 Mar 1978

5120-12-313-2363
Stud Remover

123132363
2300223-264040.00.0: RNCC: 2 | RNVC: 2
2300223-264040.00.0: RNCC: 3 | RNVC: 2

12 Mar 1988

5120-12-300-8846
Spanner Wrench

123008846
1501-324.03(4): RNCC: 3 | RNVC: 2
A813: RNCC: 5 | RNVC: 2

7 Sep 1984

5120-12-318-0531
Bearing And Bushing Inserter

123180531
1X56 136 929: RNCC: 3 | RNVC: 2
1X56136929: RNCC: 5 | RNVC: 9

7 Jun 1989

5120-12-383-9646
Spanner Wrench

123839646
7084346: RNCC: 3 | RNVC: 2

30 Dec 2010

5120-12-386-1888
Hand Hammer

123861888
I002300: RNCC: 3 | RNVC: 2

15 Aug 2011

5120-12-163-6601
Spanner Wrench

121636601
26-21C1052G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-361-1196
Socket Wrench Socket

123611196
CBD32557P01: RNCC: 3 | RNVC: 2

26 Aug 2003

5120-12-374-5472
Mounting Punch

123745472
7L0012223: RNCC: 3 | RNVC: 2

25 Feb 2008

5120-12-328-6982
Seal Inserter

123286982
F6347328: RNCC: 3 | RNVC: 2
F603158347328: RNCC: 5 | RNVC: 2

16 Jun 1992

5120-12-349-4015
Backing Out Punch

123494015
0986612070: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-377-3556
Pliers Set

123773556
108002: RNCC: 3 | RNVC: 2

12 Jan 2009

5120-12-168-6712

5120-12-176-8881
Socket Wrench

121768881
25159701104: RNCC: 3 | RNVC: 2
71119090129: RNCC: 5 | RNVC: 2

27 Dec 1978

5120-12-325-5348
Spanner Wrench

123255348
8363352: RNCC: 3 | RNVC: 2

14 Jun 1991

5120-12-384-6062
Drive Pin Punch

123846062
746000-3: RNCC: 3 | RNVC: 2

11 Mar 2011

5120-12-144-6059
Dorn

121446059
1X46915012: RNCC: 3 | RNVC: 2
V91501-2: RNCC: 5 | RNVC: 2
2360-264217.02.0: RNCC: 5 | RNVC: 2
2360-264217-02-0: RNCC: 5 | RNVC: 9
2360-264217.02.0: RNCC: 5 | RNVC: 9
2360-264217.02.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-5231
Socket Head Screw Key Set

121355231
1997Z11T: RNCC: 3 | RNVC: 2
105999: RNCC: 5 | RNVC: 2
62620-11IN: RNCC: 5 | RNVC: 2
62620-11IN: RNCC: 5 | RNVC: 9
62620-11ZOLL: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-4484
F Einstellwerkzeug

123404484
62435001: RNCC: 3 | RNVC: 2

16 Apr 1996

5120-12-392-3113
Open End Wrench

123923113
3016R-900240.000.0: RNCC: 3 | RNVC: 2

24 May 2013

5120-12-351-3140
Box Wrench

123513140
2-11X13: RNCC: 3 | RNVC: 2

12 Jul 2000

5120-12-363-9277
Bearing And Bushing Inserter And Remover

123639277
T670P5001279: RNCC: 3 | RNVC: 2

5 Aug 2004

5120-12-365-7824
Flat Tip Screwdriver

123657824
T4811 08: RNCC: 3 | RNVC: 2

2 Feb 2005

5120-12-197-2091
Fuehrungs- Ring

121972091
0706D101856/1-2: RNCC: 3 | RNVC: 2

29 Sep 1983

5120-12-325-6654
Spanner Wrench

123256654
5105.020.02.03: RNCC: 3 | RNVC: 2
7820353147: RNCC: 5 | RNVC: 2
78203 53147: RNCC: 5 | RNVC: 9

27 Jun 1991

5120-12-312-7594
Mechan Druckstueck

123127594
619-45.10.113-05: RNCC: 3 | RNVC: 2

3 Feb 1988

5120-12-120-5123
Hand Hydraulic Jack

121205123
NO PRIMARY REF 12-120-5123: RNCC: 3 | RNVC: 2
391-100: RNCC: 5 | RNVC: 9
391-100T: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-3950
Open End Wrench

121273950
200-16X19: RNCC: 3 | RNVC: 2
9015810024: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-156-1562
Socket Wrench Adapter

121561562
NM300-05: RNCC: 3 | RNVC: 2
NM300-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-163-8904
Aufziehvorrichtung

121638904
VG95211-ML-121638904: RNCC: 2 | RNVC: 2
1X56 136 393: RNCC: 3 | RNVC: 2
1X56136393: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-329-5238
Socket Wrench Socket

123295238
081-140180-903-0: RNCC: 2 | RNVC: 2
081-140180-903-0: RNCC: 3 | RNVC: 2

27 Aug 1992

5120-12-368-9249
Torque Wrench

123689249
598101-990000.024.0: RNCC: 3 | RNVC: 2

8 May 2006

5120-12-187-7149
Mechanical Puller Attachment

121877149
22-0: RNCC: 3 | RNVC: 2
NR.22/0: RNCC: 3 | RNVC: 2

29 Apr 1981

5120-12-168-1125
Spanner Wrench

121681125
12709-21300W3: RNCC: 3 | RNVC: 2
12709-21300W3: RNCC: 5 | RNVC: 2
12709-21300W3: RNCC: 5 | RNVC: 9

18 Feb 1977

5120-12-347-2669
Piston Ring Compressor

123472669
57498-645: RNCC: 3 | RNVC: 2

18 Nov 1998

5120-12-373-4045
Screwdriver Bit Set And Handle

123734045
375: RNCC: 3 | RNVC: 2

30 Oct 2007

5120-12-154-1520

5120-12-389-0326
Pedal Adjustment Tool Compressor

123890326
2040: RNCC: 3 | RNVC: 2

21 May 2012

5120-12-133-3748
Box Wrench

121333748
23A1X1 1-8: RNCC: 3 | RNVC: 2
41474852: RNCC: 5 | RNVC: 2
625A1X1 1/8: RNCC: 5 | RNVC: 9
104005: RNCC: 5 | RNVC: 9
1300Z1X1 1-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-387-6124
Stud Inserter And Remover

123876124
51-1: RNCC: 3 | RNVC: 2

16 Jan 2012

5120-12-171-6848
Mechanical Puller Attachment

121716848
220-7: RNCC: 3 | RNVC: 2
108143: RNCC: 5 | RNVC: 9
4520G: RNCC: 5 | RNVC: 9

3 Nov 1977

5120-12-348-6895
Drive Pin Punch

123486895
51288018: RNCC: 3 | RNVC: 2
957310: RNCC: 5 | RNVC: 2

5 Aug 1999

5120-12-198-6577
Aufweitwer Einsatz

121986577
234 205: RNCC: 3 | RNVC: 2

17 Feb 1984

5120-12-312-4095
Bearing And Bushing Remover

123124095
KDEP2907: RNCC: 3 | RNVC: 2
KDEP 2907: RNCC: 5 | RNVC: 2

29 Dec 1987

5120-12-133-3216
Crimping Tool Die

121333216
05020: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-384-7709
Mechanical Puller Attachment

123847709
520-990300.00.0: RNCC: 2 | RNVC: 2
520-990300.00.0: RNCC: 3 | RNVC: 2

28 Mar 2011

5120-12-162-4161
Rack Bar Jack

121624161
1-5-159-32: RNCC: 3 | RNVC: 2
NA8013-32-2: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-199-8562
Pin Vise

121998562
4512037: RNCC: 3 | RNVC: 2
51002110: RNCC: 3 | RNVC: 2
300-100: RNCC: 3 | RNVC: 2
V22199-Z-C302: RNCC: 5 | RNVC: 2
V22199ZC302: RNCC: 5 | RNVC: 2
86 460: RNCC: 5 | RNVC: 2
51002100: RNCC: 5 | RNVC: 9

7 Jun 1984

5120-12-150-2744
Venti Blindflansch

121502744
23176-264290-00-0: RNCC: 2 | RNVC: 2
23176-264290.00.0: RNCC: 2 | RNVC: 2
23176-264290-00-0: RNCC: 5 | RNVC: 2
23176-264290.00.0: RNCC: 5 | RNVC: 2
23176-264290-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-145-6828
Sperrza Halbschale

121456828
NO PRIMARY REF 12-145-6828: RNCC: 3 | RNVC: 2
444-31-138-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-390-3160
Cran Mounting Tool

123903160
5805890061/00: RNCC: 3 | RNVC: 2

29 Oct 2012

5120-12-322-2820
Spanner Wrench

123222820
7368801: RNCC: 3 | RNVC: 2

8 Aug 1990

5120-12-340-7085
Piston Inserter

123407085
1212 8429: RNCC: 3 | RNVC: 2

29 May 1996

5120-12-374-3634
Socket Head Screw Key

123743634
43250030-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-092-2276

5120-12-126-5957

5120-12-121-1047

5120-12-173-4343
Spanner Wrench

121734343
532008G16W1: RNCC: 3 | RNVC: 2
532008G16W1: RNCC: 5 | RNVC: 2
532008G16W1: RNCC: 5 | RNVC: 9
532008G16W1: RNCC: 5 | RNVC: 9

14 Apr 1978

5120-12-146-5130

5120-12-365-5297
Socket Head Screw Key

123655297
T49017 1530: RNCC: 3 | RNVC: 2

12 Jan 2005

5120-12-387-7019
Preformed Packing Remover

123877019
F6785078: RNCC: 3 | RNVC: 2

25 Jan 2012

5120-12-351-8935
Hand Terminal Crimping Tool

123518935
901435: RNCC: 3 | RNVC: 2

11 Sep 2000

5120-12-185-9326
Feststellvorrichtun

121859326
2215630: RNCC: 3 | RNVC: 2
99370317: RNCC: 3 | RNVC: 2
416160: RNCC: 5 | RNVC: 9
416160: RNCC: 5 | RNVC: 9

11 Nov 1980

5120-12-135-2112

5120-12-140-8981
Spanner Wrench

121408981
10080: RNCC: 3 | RNVC: 2
10080: RNCC: 3 | RNVC: 2
10080: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-342-1186
Socket Wrench Socket

123421186
DIN7448-24X12,5: RNCC: 2 | RNVC: 2

13 Dec 1996

5120-12-303-4268
Hand Hammer

123034268
5122650: RNCC: 3 | RNVC: 9

21 Mar 1985

5120-12-342-9944
Socket Wrench Socket Set

123429944
IN 19 PA: RNCC: 3 | RNVC: 2
615641: RNCC: 5 | RNVC: 2

22 Apr 1997

5120-12-375-9661
Screwdriver Bit Set And Handle

123759661
05051023001: RNCC: 3 | RNVC: 2

25 Jul 2008

5120-12-384-7373
Blacksmiths' Tongs

123847373
51.000.019: RNCC: 3 | RNVC: 2
51.000.019: RNCC: 5 | RNVC: 2

24 Mar 2011

5120-12-327-3839
Hand Scissors Jack

123273839
7DO011031: RNCC: 3 | RNVC: 2
701011031B: RNCC: 5 | RNVC: 9
701011031N: RNCC: 5 | RNVC: 9

16 Jan 1992

5120-12-328-4267
Pin Inserter

123284267
F361130371982: RNCC: 3 | RNVC: 2
F30371982: RNCC: 5 | RNVC: 2

16 May 1992

5120-12-337-4832
Socket Wrench

123374832
375-E10: RNCC: 3 | RNVC: 2

9 Mar 1995

5120-12-354-1142
Schluessel

123541142
B59500: RNCC: 3 | RNVC: 2
4920-00560: RNCC: 6 | RNVC: 9

6 Jun 2001

5120-12-121-4804
Socket Wrench

121214804
DIN896-A24X30: RNCC: 2 | RNVC: 2
A24X30DIN896: RNCC: 5 | RNVC: 2
A24X30DIN896GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-329-1260
Bearing And Bushing Remover

123291260
2300232-991010.000.0: RNCC: 2 | RNVC: 2
2300232-991010.000.0: RNCC: 3 | RNVC: 2

21 Jul 1992

5120-12-140-9480
Einfu Hand Kurbel

121409480
4626A: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-177-2790
Zwischenring

121772790
2300002-269050.001: RNCC: 2 | RNVC: 2
2300002-269050.001: RNCC: 3 | RNVC: 2
2300002-269050-001: RNCC: 5 | RNVC: 9
2300002-269050.001: RNCC: 5 | RNVC: 9

24 Jan 1979

5120-12-314-7035
Ge Montierwerkzeug

123147035
F11.49043-0507: RNCC: 3 | RNVC: 2

30 Jul 1988

5120-12-178-7984
Hammer Handle

121787984
DIN5111-X-310-B-ES-LACKIERT: RNCC: 2 | RNVC: 2
46-310,ESCHE,GERADE: RNCC: 3 | RNVC: 2
310DIN5111BLACKIERT: RNCC: 5 | RNVC: 9
DIN5111-310BLACKIERT: RNCC: 5 | RNVC: 9

16 May 1979

5120-12-364-6567
Ratchet Wrench

123646567
3125-13: RNCC: 3 | RNVC: 2
F30048958: RNCC: 5 | RNVC: 2
0031250613: RNCC: 5 | RNVC: 2

19 Oct 2004

5120-12-383-2226
Open End Wrench

123832226
6404330: RNCC: 3 | RNVC: 2
6404330: RNCC: 5 | RNVC: 2
133 1.1/4AF: RNCC: 5 | RNVC: 2
A52-64-01: RNCC: 5 | RNVC: 2

27 Sep 2010

5120-12-184-0268
Torque Wrench Adapter

121840268
TL5120-0086-250: RNCC: 2 | RNVC: 2
58214017: RNCC: 5 | RNVC: 2
7852-7 17: RNCC: 5 | RNVC: 9
20/DCA-17: RNCC: 5 | RNVC: 9
6264110004: RNCC: 5 | RNVC: 9
6450D-17: RNCC: 5 | RNVC: 9
731-40-17: RNCC: 5 | RNVC: 9
731-40SW17: RNCC: 5 | RNVC: 9

12 Jun 1980

5120-12-024-4801

5120-12-157-4251
Battery Filler Cap Wrench

121574251
92913804800: RNCC: 3 | RNVC: 2
003.526.030.110: RNCC: 5 | RNVC: 9
844083: RNCC: 5 | RNVC: 9
9291380467: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-4380
Chain Type Ratchet Lever Puller

123884380
7311.30.05: RNCC: 3 | RNVC: 2

22 Mar 2012

5120-12-336-5949
Screw Thread Insert Tang Breakoff Tool

123365949
01586060000: RNCC: 3 | RNVC: 2

29 Nov 1994

5120-12-197-9307
Mechanical Puller

121979307
105-31734W1: RNCC: 3 | RNVC: 2

1 Dec 1983

5120-12-010-5223

5120-12-325-8117
Seal Inserter

123258117
5870055022: RNCC: 3 | RNVC: 2
790511077: RNCC: 5 | RNVC: 2
5870055022: RNCC: 5 | RNVC: 9
5870 055 022: RNCC: 5 | RNVC: 9

12 Jul 1991

5120-12-390-4951
Hand Hydraulic Jack

123904951
160.0354: RNCC: 3 | RNVC: 2

16 Nov 2012

5120-12-145-4685
Haken

121454685
2195-9863-010: RNCC: 3 | RNVC: 2
2195-9863-010: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-7770
Hand Screw Starter

121777770
NO PRIMARY REF 12-177-7770: RNCC: 3 | RNVC: 2
130011: RNCC: 5 | RNVC: 9
8065N3: RNCC: 5 | RNVC: 9

19 Feb 1979

5120-12-369-3674
Ge Montierwerkzeug

123693674
4425890963/00: RNCC: 3 | RNVC: 2

27 Jun 2006

5120-12-171-2152
Mechanical Puller

121712152
80996026011: RNCC: 3 | RNVC: 2
80.99602-6011: RNCC: 5 | RNVC: 2
80.99602-0034: RNCC: 5 | RNVC: 9
80996020034: RNCC: 5 | RNVC: 9

19 Sep 1977

5120-12-369-7397
Dapping Punch

123697397
904589021500: RNCC: 3 | RNVC: 2
7083672: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-171-9955
Screwdriver Bit

121719955
45M2: RNCC: 3 | RNVC: 2
114047: RNCC: 5 | RNVC: 2
45M2: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-312-4825
Pin Inserter

123124825
1013-101W4: RNCC: 3 | RNVC: 2

12 Jan 1988

5120-12-338-1889
Handwer Handschutz

123381889
108UNI: RNCC: 3 | RNVC: 2
865850: RNCC: 5 | RNVC: 9

1 Jun 1995

5120-12-179-5817
Betaetigungsstange

121795817
32998: RNCC: 3 | RNVC: 2

11 Jul 1979

5120-12-308-3366
Hand Beading Tool

123083366
364 417: RNCC: 3 | RNVC: 2

29 Sep 1986

5120-12-199-5712
Gewindee Aufweiter

121995712
SRM 0508 S: RNCC: 3 | RNVC: 2
SRM 0508 S: RNCC: 5 | RNVC: 9

15 May 1984

5120-12-121-5630
Trowel

121215630
DIN6440-A200: RNCC: 2 | RNVC: 2
A200DIN6440: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-371-0805
Pinch Bar

123710805
0117510800: RNCC: 3 | RNVC: 2
120-800: RNCC: 3 | RNVC: 2
A117.K1-800: RNCC: 5 | RNVC: 2
8769840: RNCC: 5 | RNVC: 2
02.39.76.17: RNCC: 5 | RNVC: 2

7 Feb 2007

5120-12-368-9252
Socket Wrench Socket

123689252
771-S37: RNCC: 3 | RNVC: 2
00.51.81.40: RNCC: 5 | RNVC: 2

8 May 2006

5120-12-139-2494
Socket Wrench Socket

121392494
027M01900: RNCC: 3 | RNVC: 2
VM71640: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-140-9213
Einfuehrvorrichtung

121409213
4626AND4626A: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-132-4307

5120-12-023-2578

5120-12-358-0835
Socket Wrench Handle

123580835
452: RNCC: 3 | RNVC: 2

10 Sep 2002

5120-12-170-8411
Socket Head Screw Key

121708411
NO PRIMARY REF 12-170-8411: RNCC: 3 | RNVC: 2
250507: RNCC: 5 | RNVC: 2
250507: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-163-9175
Socket Wrench Extension

121639175
6962L: RNCC: 3 | RNVC: 2
108991: RNCC: 5 | RNVC: 2
11240005: RNCC: 5 | RNVC: 9
414-14: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-391-6224
Socket Head Screw Key Set

123916224
36558: RNCC: 3 | RNVC: 2
3251NK6: RNCC: 5 | RNVC: 2

21 Mar 2013

5120-12-126-1702

5120-12-327-2625
Aligning Punch

123272625
01TC33514: RNCC: 3 | RNVC: 2

2 Jan 1992

5120-12-345-3585
Bearing And Bushing Inserter And Remover

123453585
F6 344780: RNCC: 3 | RNVC: 2

5 Mar 1998

5120-12-311-7238
Montierwerk Huelse

123117238
80996240001: RNCC: 3 | RNVC: 2
80.99624.0001: RNCC: 5 | RNVC: 2

12 Oct 1987

5120-12-121-1217
Cross Tip Screwdriver

121211217
NO PRIMARY REF 12-121-1217: RNCC: 3 | RNVC: 2
778RUPB4: RNCC: 5 | RNVC: 9
131751: RNCC: 5 | RNVC: 9
778RUP4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-8885
Haken

121358885
1005-9800-9: RNCC: 2 | RNVC: 2
1005-9800-9: RNCC: 5 | RNVC: 2
1005-9800.9: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-133-3546
Socket Wrench Screwdriver Attachment

121333546
8801A-3/16: RNCC: 3 | RNVC: 2
2486120003: RNCC: 5 | RNVC: 2
571E325B3-16IN: RNCC: 5 | RNVC: 2
10180: RNCC: 5 | RNVC: 2
8801A3-16: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-374-7961
Socket Wrench Set

123747961
112798: RNCC: 3 | RNVC: 2

25 Mar 2008

5120-12-315-4368
Mechanical Puller

123154368
4987080: RNCC: 3 | RNVC: 2

21 Oct 1988

5120-12-010-5217

5120-12-362-4719
Combination Box And Open End Wrench

123624719
54.0084.960.50: RNCC: 3 | RNVC: 2
13-16: RNCC: 5 | RNVC: 2

27 Feb 2004

5120-12-133-2352

5120-12-123-4907

5120-12-375-1738
Mechanical Puller

123751738
4543-2/S: RNCC: 3 | RNVC: 2

29 Apr 2008

5120-12-144-6092
Face Spanner Wrench Socket

121446092
838589010700: RNCC: 3 | RNVC: 2
8385890107: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5380

5120-12-328-4260
Rotating Members Aligning Tool

123284260
F362590273560: RNCC: 3 | RNVC: 2
F30273560: RNCC: 5 | RNVC: 2

16 May 1992

5120-12-021-2656

5120-12-361-7128
Socket Wrench Set

123617128
23080: RNCC: 3 | RNVC: 2

6 Nov 2003

5120-12-364-1948
Mechanical Puller

123641948
F6557945: RNCC: 3 | RNVC: 2

31 Aug 2004

5120-12-364-6129
Socket Wrench Crowfoot Attachment

123646129
02190017-TCS: RNCC: 3 | RNVC: 2

14 Oct 2004

5120-12-380-2346
Mechanical Puller

123802346
0986612498: RNCC: 3 | RNVC: 2
0 986 612 498: RNCC: 5 | RNVC: 2

8 Oct 2009

5120-12-198-1742
Hand Terminal Crimping Tool

121981742
825 590-1: RNCC: 3 | RNVC: 2

27 Dec 1983

5120-12-162-4677
Socket Head Screw Key

121624677
1542725: RNCC: 3 | RNVC: 2
HS8094-6: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-300-4744
Bearing And Bushing Inserter

123004744
4900059-751460.001.0: RNCC: 3 | RNVC: 2

4 Aug 1984

5120-12-333-6283
Spanner Wrench

123336283
4989001: RNCC: 3 | RNVC: 2
MAGERD 0565 S: RNCC: 5 | RNVC: 9

14 Jan 1994

5120-12-373-7984
Mechanical Puller

123737984
10104329: RNCC: 3 | RNVC: 2

7 Dec 2007

5120-12-373-4289
Socket Wrench Socket

123734289
1X36166806: RNCC: 3 | RNVC: 2
1X36166806: RNCC: 5 | RNVC: 2

31 Oct 2007

5120-12-344-6270
Spanner Wrench

123446270
905.259.000: RNCC: 3 | RNVC: 2

18 Nov 1997

5120-12-150-5720
Abpreszvorrichtung

121505720
837589042500: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-320-0844
Socket Wrench

123200844
560589070900: RNCC: 3 | RNVC: 2

6 Dec 1989

5120-12-330-5529
Stud Inserter

123305529
0851 0469: RNCC: 3 | RNVC: 2
8510469: RNCC: 5 | RNVC: 2

8 Jan 1993

5120-12-329-8021
Mechanical Puller Attachment

123298021
8501857.013: RNCC: 3 | RNVC: 2
0850 1857.013: RNCC: 5 | RNVC: 2

1 Oct 1992

5120-12-091-2903

5120-12-393-7853
Fixed Open End Wrench Set

123937853
35090: RNCC: 3 | RNVC: 2

10 Oct 2013

5120-12-372-5614
Spanner Wrench

123725614
901589000700: RNCC: 3 | RNVC: 2

30 Jul 2007

5120-12-126-5417
Einstell- Dorn

121265417
1365890061: RNCC: 3 | RNVC: 2
1365890061: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-131-2838
Socket Wrench Handle Bar

121312838
16-20-22DWN57: RNCC: 3 | RNVC: 2
641: RNCC: 5 | RNVC: 2
90482: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-391-0636
Bearing Staking Installation Tool

123910636
F30379217: RNCC: 3 | RNVC: 2

22 Jan 2013

5120-12-304-3883
Lifting Pneumatic Bag

123043883
11201000: RNCC: 3 | RNVC: 9
TYP I/6: RNCC: 5 | RNVC: 9

11 Jul 1985

5120-12-368-8481
Hand Terminal Crimping Tool

123688481
9721215C: RNCC: 3 | RNVC: 2
00.16.70.21: RNCC: 5 | RNVC: 2

28 Apr 2006

5120-12-150-4479
Mechanical Puller

121504479
837589183300: RNCC: 3 | RNVC: 2
8375891833: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-364-3128
Socket Wrench Socket

123643128
01030008-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-312-9351
Mechanical Finger

123129351
KDEP 2943: RNCC: 3 | RNVC: 2

19 Feb 1988

5120-12-126-2549
Pliers

121262549
573C221: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-179-1322
Retaining Ring Pliers

121791322
NO PRIMARY REF 12-179-1322: RNCC: 3 | RNVC: 2
3-7821-476: RNCC: 5 | RNVC: 2
7821476: RNCC: 5 | RNVC: 2
115-01964-3: RNCC: 5 | RNVC: 9
3-7821-476: RNCC: 5 | RNVC: 9

8 Jun 1979

5120-12-321-1376
Schluessel

123211376
272.369 548: RNCC: 2 | RNVC: 2
272.369 548: RNCC: 3 | RNVC: 2
CTWA-14: RNCC: 5 | RNVC: 2

2 Apr 1990

5120-12-150-6111
Auf- Und Abpreszvor

121506111
23176-264360-00-0: RNCC: 2 | RNVC: 2
23176-264360.00.0: RNCC: 2 | RNVC: 2
23176-264360.00.0: RNCC: 5 | RNVC: 2
23176-264360-00-0: RNCC: 5 | RNVC: 2
23176-264360-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-130-1310
Spanner Wrench

121301310
51680: RNCC: 3 | RNVC: 2
024834: RNCC: 5 | RNVC: 2
775 155-230: RNCC: 5 | RNVC: 2
52104050: RNCC: 5 | RNVC: 2
TS5120-0159-155-230MM: RNCC: 5 | RNVC: 2
775-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-348-6180
Pliers

123486180
722130-135: RNCC: 3 | RNVC: 2
71922-120: RNCC: 5 | RNVC: 9

27 Jul 1999

5120-12-190-1909
Mechanical Puller Step Plate

121901909
NO PRIMARY REF 12-190-1909: RNCC: 3 | RNVC: 2
41 01 11: RNCC: 5 | RNVC: 9
410111: RNCC: 5 | RNVC: 9
410111: RNCC: 5 | RNVC: 9

10 Nov 1981

5120-12-349-5619
Torque Wrench

123495619
03W021-000: RNCC: 3 | RNVC: 2

2 Dec 1999

5120-12-361-5809
Sp Montierwerkzeug

123615809
588.00-900001-000: RNCC: 3 | RNVC: 2

21 Oct 2003

5120-12-306-0877
Spanner Wrench

123060877
23114-7154.00: RNCC: 2 | RNVC: 2
23114-7154.00: RNCC: 3 | RNVC: 2
23114-7154-00: RNCC: 5 | RNVC: 9
23114-7154-00: RNCC: 5 | RNVC: 9
23114-7154.00: RNCC: 5 | RNVC: 9

24 Jan 1986

5120-12-187-9659
Face Spanner Wrench Socket

121879659
3S50384-0000: RNCC: 3 | RNVC: 2

20 May 1981

5120-12-311-8376
Socket Wrench

123118376
S642C/350: RNCC: 3 | RNVC: 2

21 Oct 1987

5120-12-316-0018
Ausdrueckwerkzeug

123160018
503659: RNCC: 3 | RNVC: 2

14 Dec 1988

5120-12-183-1559
Socket Wrench Screwdriver Attachment

121831559
1X56136636: RNCC: 3 | RNVC: 2

20 Mar 1980

5120-12-323-9845
Screwdriver Bit

123239845
0613802-2: RNCC: 3 | RNVC: 2

15 Jan 1991

5120-12-333-8143
Socket Wrench Screwdriver Attachment

123338143
986SLG-6: RNCC: 3 | RNVC: 2
63081500: RNCC: 5 | RNVC: 2
2487110023: RNCC: 5 | RNVC: 2

9 Feb 1994

5120-12-362-4943
Cross Tip Screwdriver

123624943
54.0084.960.33: RNCC: 3 | RNVC: 2
8078L-2: RNCC: 5 | RNVC: 2

3 Mar 2004

5120-12-362-7120
Hydra Aufnahmeteil

123627120
2500261-993230.002.0: RNCC: 2 | RNVC: 2
2500261-993230.002.0: RNCC: 3 | RNVC: 2

23 Mar 2004

5120-12-347-4378
Socket Wrench Extension

123474378
919-5: RNCC: 3 | RNVC: 2

10 Dec 1998

5120-12-147-6423
Screw Thread Insert Inserter

121476423
01500174700: RNCC: 3 | RNVC: 2
01562747000: RNCC: 5 | RNVC: 9
535-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-8784
Abziehzange

121298784
1687965007: RNCC: 3 | RNVC: 2
EF3107: RNCC: 5 | RNVC: 2
KDAW9995-7: RNCC: 5 | RNVC: 9
EF3107: RNCC: 5 | RNVC: 9
1687965007: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-325-6286
Seal Inserter

123256286
714589001500: RNCC: 3 | RNVC: 2

24 Jun 1991

5120-12-168-8133
Verlaengerung

121688133
118253901: RNCC: 3 | RNVC: 2

6 Apr 1977

5120-12-326-9519
Spanner Wrench

123269519
2300232-971210.000.0: RNCC: 2 | RNVC: 2
2300232-971210.000.0: RNCC: 3 | RNVC: 2

13 Nov 1991

5120-12-387-5563
Craftsman's Tweezers Set

123875563
5-060: RNCC: 3 | RNVC: 2

9 Jan 2012

5120-12-306-4844
We Montierwerkzeug

123064844
V751191: RNCC: 3 | RNVC: 2

4 Mar 1986

5120-12-358-7510
Socket Wrench Set

123587510
14899.2: RNCC: 3 | RNVC: 2

11 Nov 2002

5120-12-372-8056
Float

123728056
108 280 00: RNCC: 3 | RNVC: 2
02.33.74.94: RNCC: 5 | RNVC: 2

23 Aug 2007

5120-12-127-8500
Ring

121278500
30355710100158: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-302-2212
Mechanical Puller Attachment

123022212
23305-264115.00.0: RNCC: 2 | RNVC: 2
23305-264115.00.0: RNCC: 3 | RNVC: 2
HT89/5891/02: RNCC: 5 | RNVC: 9

11 Dec 1984

5120-12-356-4094
Socket Wrench

123564094
218825: RNCC: 3 | RNVC: 2
LABTS-00-105000: RNCC: 5 | RNVC: 2

26 Feb 2002

5120-12-324-5808
Cross Tip Screwdriver

123245808
8080-0: RNCC: 3 | RNVC: 2
162736: RNCC: 5 | RNVC: 2

1 Mar 1991

5120-12-137-9809
Socket Wrench

121379809
074203: RNCC: 3 | RNVC: 2
8787950000: RNCC: 5 | RNVC: 9
WZ19L1Z: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-192-9988
Montagestab

121929988
617589004300: RNCC: 3 | RNVC: 2

11 Jun 1982

5120-12-378-2069
Combination Box And Open End Wrench

123782069
6004070: RNCC: 3 | RNVC: 2
1B60: RNCC: 5 | RNVC: 2
4010886600405: RNCC: 5 | RNVC: 2
6004070: RNCC: 5 | RNVC: 2
1B60: RNCC: 5 | RNVC: 2
4010886600405: RNCC: 5 | RNVC: 2

19 Mar 2009

5120-12-359-3628
Bushing Driver Set

123593628
T622P3005051: RNCC: 3 | RNVC: 2

28 Jan 2003

5120-12-168-1126
Spanner Wrench

121681126
12709-21300W4: RNCC: 3 | RNVC: 2
12709-21300W4: RNCC: 5 | RNVC: 2
12709-21300W4: RNCC: 5 | RNVC: 9

18 Feb 1977

5120-12-311-1630
Oelfilt Schluessel

123111630
C 5714 143 A: RNCC: 3 | RNVC: 2
2171-2: RNCC: 3 | RNVC: 2
C 5714 143 A: RNCC: 3 | RNVC: 2
7145712: RNCC: 3 | RNVC: 2
C5714143A: RNCC: 5 | RNVC: 2
5747640002: RNCC: 5 | RNVC: 2
C5714143A: RNCC: 5 | RNVC: 2

3 Aug 1987

5120-12-126-2601
Valve Spring Lifter

121262601
012C051: RNCC: 3 | RNVC: 2
52600: RNCC: 5 | RNVC: 9
793-1: RNCC: 5 | RNVC: 9
106690: RNCC: 5 | RNVC: 9
2700: RNCC: 5 | RNVC: 9
132: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-383-6654
Quick Adjusting Screw Clamp

123836654
TB120: RNCC: 3 | RNVC: 2

23 Nov 2010

5120-12-390-0634
Mechanical Puller Attachment

123900634
KV1047: RNCC: 3 | RNVC: 2

28 Sep 2012

5120-12-336-5848
Montierdorn

123365848
0851 3651: RNCC: 3 | RNVC: 2
8513651: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-341-4672
Hand Shovel

123414672
WRYUG7790: RNCC: 3 | RNVC: 2
A049530190012: RNCC: 5 | RNVC: 2

6 Sep 1996

5120-12-181-9730
Haltevorrichtung

121819730
VW785-1: RNCC: 3 | RNVC: 9

28 Dec 1979

5120-12-388-6296
Socket Wrench Screwdriver Attachment

123886296
8801-7: RNCC: 3 | RNVC: 2
4000896039401: RNCC: 5 | RNVC: 2

5 Apr 2012

5120-12-377-4766
Mounting Lever

123774766
8029210: RNCC: 3 | RNVC: 2
1.70/1: RNCC: 5 | RNVC: 2
8029210: RNCC: 5 | RNVC: 2

19 Jan 2009

5120-12-126-1860
Electric Melting Pot

121261860
7272-1 LTR: RNCC: 3 | RNVC: 2
7272-1LTR: RNCC: 5 | RNVC: 9
5120-90002: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-367-0788
Torque Wrench Adapter

123670788
8792-10: RNCC: 3 | RNVC: 2
7712600: RNCC: 5 | RNVC: 2

6 Jul 2005

5120-12-152-1778
Socket Head Screw Key

121521778
532686-9001.000: RNCC: 3 | RNVC: 2
532686-9001.000: RNCC: 5 | RNVC: 9
532686-9001: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-1141
Flat Tip Screwdriver

121461141
NM256-13: RNCC: 3 | RNVC: 2
JD5120-12-146-1141: RNCC: 5 | RNVC: 2
NM256-13: RNCC: 5 | RNVC: 9
A1X7X150DIN5265TLAWN481: RNCC: 5 | RNVC: 9
AWN481-1X7NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-325-6959
Crimping Tool Die

123256959
11W150-104: RNCC: 3 | RNVC: 2

1 Jul 1991

5120-12-166-0408
Refrigeration Valve Stem Wrench Socket

121660408
R6810M7: RNCC: 3 | RNVC: 2
108893: RNCC: 5 | RNVC: 2

24 Jul 1976

5120-12-384-8067
Hammer Handle

123848067
51.000.026: RNCC: 3 | RNVC: 2
51.000.026: RNCC: 5 | RNVC: 2

30 Mar 2011

5120-12-341-3953
Eindrueckwerkzeug

123413953
287.68.400: RNCC: 3 | RNVC: 9

30 Aug 1996

5120-12-155-9525
Gum Dreidorn- Zange

121559525
NM224: RNCC: 3 | RNVC: 2
NM224: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-4588
Socket Wrench

123054588
CF 445 853 AE: RNCC: 3 | RNVC: 2
CF 445 853 AE: RNCC: 3 | RNVC: 2

8 Nov 1985

5120-12-317-8869
Combination Box And Open End Wrench Set

123178869
1952M/7T: RNCC: 3 | RNVC: 2
180663: RNCC: 5 | RNVC: 2

23 May 1989

5120-12-369-0267
Trowel

123690267
651 180 00: RNCC: 3 | RNVC: 2
02.33.29.49: RNCC: 5 | RNVC: 2

15 May 2006

5120-12-134-2640
Socket Wrench

121342640
027M03700: RNCC: 3 | RNVC: 2
VM57481: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-348-6327
Socket Wrench Set

123486327
7819DHRN: RNCC: 3 | RNVC: 2

28 Jul 1999

5120-12-333-6686
Socket Wrench

123336686
26R13X14: RNCC: 3 | RNVC: 2
621110: RNCC: 5 | RNVC: 2

20 Jan 1994

5120-12-171-9235
Pinch Bar

121719235
6203-1-1-2: RNCC: 3 | RNVC: 9

29 Nov 1977

5120-12-379-8578
Spanner Wrench

123798578
7.2100: RNCC: 3 | RNVC: 2

8 Sep 2009

5120-12-390-4305
Mechanical Puller Step Plate

123904305
F6372938: RNCC: 3 | RNVC: 2

13 Nov 2012

5120-12-352-3340
Drive Pin Punch

123523340
22015.0.00.100.00P0S.8: RNCC: 3 | RNVC: 2

8 Nov 2000

5120-12-187-9650
Crimping Tool Die

121879650
1923.0: RNCC: 3 | RNVC: 2
E4: RNCC: 5 | RNVC: 2

20 May 1981

5120-12-370-6242
Trowel

123706242
748 006 00: RNCC: 3 | RNVC: 2
02.33.54.74: RNCC: 5 | RNVC: 2

1 Dec 2006

5120-12-135-4023

5120-12-390-0864
Torque Wrench Adapter

123900864
R819958: RNCC: 3 | RNVC: 2

2 Oct 2012

5120-12-135-0036
Hand Hammer

121350036
5099ES3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-157-6768
Kabelschuhh Matrize

121576768
B10WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-365-7819
Craftsman's Tweezers

123657819
T2384: RNCC: 3 | RNVC: 2

2 Feb 2005

5120-12-359-4804
Ausrichtwerk Griff

123594804
B59980: RNCC: 3 | RNVC: 2

10 Feb 2003

5120-12-321-7935
Box Wrench

123217935
C2S-M6X7: RNCC: 3 | RNVC: 2
147982: RNCC: 5 | RNVC: 2

27 Jun 1990

5120-12-167-9695
Spanner Wrench

121679695
335914-9014.000: RNCC: 2 | RNVC: 2
335914-9014.000: RNCC: 3 | RNVC: 2
1255-35000W5: RNCC: 5 | RNVC: 2
335914-9014.000: RNCC: 5 | RNVC: 9
1255-35000W5: RNCC: 5 | RNVC: 9
335914-9014.000: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-304-6222
Screw Thread Insert Inserter

123046222
23305-264500-03-0: RNCC: 2 | RNVC: 2

6 Aug 1985

5120-12-356-8473
Swivel Knob Jeweler's Screwdriver

123568473
6-682: RNCC: 3 | RNVC: 2
267-T6: RNCC: 3 | RNVC: 2
00567: RNCC: 5 | RNVC: 2
00567: RNCC: 5 | RNVC: 2
267-T6: RNCC: 5 | RNVC: 2

10 Apr 2002

5120-12-381-5494
Socket Wrench Socket

123815494
40ADL-5/32: RNCC: 3 | RNVC: 2
01640010: RNCC: 5 | RNVC: 2

3 Mar 2010

5120-12-156-1669
Rohr- Zange

121561669
NM167-05: RNCC: 3 | RNVC: 2
NM167-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-145-9602
Dorn

121459602
1215890143: RNCC: 3 | RNVC: 2
121589014300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-149-5290
Hand Hammer

121495290
252-28: RNCC: 3 | RNVC: 2
7320004: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-319-4356
Lager- Und Einsatz

123194356
99374349: RNCC: 3 | RNVC: 2

2 Oct 1989

5120-12-140-9569
Schluessel

121409569
RP516-64: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-338-4374
Torque Wrench

123384374
001589392101: RNCC: 3 | RNVC: 2
001 589 39 21 01: RNCC: 5 | RNVC: 2

10 Jul 1995

5120-12-131-5806

5120-12-092-3882

5120-12-130-4013

5120-12-322-6024
Screw Thread Insert Inserter

123226024
F30275364: RNCC: 3 | RNVC: 2

5 Sep 1990

5120-12-373-4047
Flat Tip Screwdriver

123734047
379-5: RNCC: 3 | RNVC: 2

30 Oct 2007

5120-12-378-9251
Torque Wrench Adapter

123789251
734/80: RNCC: 3 | RNVC: 2
58240080: RNCC: 5 | RNVC: 2

29 May 2009

5120-12-312-0063
Mechanical Puller

123120063
2500179-993330.000.0: RNCC: 2 | RNVC: 2
2500179-993330.000.0: RNCC: 3 | RNVC: 2

10 Nov 1987

5120-12-044-4924

5120-12-174-6473
Zentrier- Dorn

121746473
1010: RNCC: 3 | RNVC: 9

17 Jul 1978

5120-12-042-5961

5120-12-301-2678
Ph Schraubendreher

123012678
975-40: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-12-358-0179
Box Wrench

123580179
DIN7444-27: RNCC: 2 | RNVC: 2

3 Sep 2002

5120-12-172-0095
Open End Wrench

121720095
1931M6-5: RNCC: 3 | RNVC: 9
129842: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-390-6070
Mechanical Puller Attachment

123906070
193169-0: RNCC: 3 | RNVC: 2
193169-0: RNCC: 5 | RNVC: 2

27 Nov 2012

5120-12-123-5292
Box Wrench

121235292
380-11-16X3-4: RNCC: 3 | RNVC: 2
2-11-16X3-4: RNCC: 3 | RNVC: 2
475-11/16X3/4: RNCC: 3 | RNVC: 2
TVA5120-2-263-031.1.1.36: RNCC: 5 | RNVC: 2
27-406: RNCC: 5 | RNVC: 2
00475663082: RNCC: 5 | RNVC: 2
20A11/16X3/4: RNCC: 5 | RNVC: 9
2-416: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1791
Drill Guide

121261791
TL5120-0052-110A: RNCC: 2 | RNVC: 2
1418E: RNCC: 3 | RNVC: 2
104054: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-193-5709
Spanner Wrench

121935709
4S51348-0001: RNCC: 3 | RNVC: 2
4S51348-0001-403: RNCC: 5 | RNVC: 2
4S51348-0001-405: RNCC: 5 | RNVC: 2
4S51348-0001-407: RNCC: 5 | RNVC: 2
MAGERD 2781: RNCC: 5 | RNVC: 2

4 Aug 1982

5120-12-159-9971
Abziehvorrichtung

121599971
3037-9930-010: RNCC: 3 | RNVC: 2
3037-9930-010: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-132-1113

5120-12-188-4369
Vise Jaw Caps

121884369
0203D101544/1: RNCC: 3 | RNVC: 2
MAGERD 5763: RNCC: 5 | RNVC: 9
0203D101544/1-B: RNCC: 5 | RNVC: 9
0203D101544/1-C: RNCC: 5 | RNVC: 9
0203D101544/1-D: RNCC: 5 | RNVC: 9

9 Jul 1981

5120-12-355-5484
Socket Wrench

123555484
12507-10: RNCC: 3 | RNVC: 2
43230100: RNCC: 5 | RNVC: 2

22 Nov 2001

5120-12-369-5273
Mechanical Puller

123695273
1.10/2: RNCC: 3 | RNVC: 2
8002790: RNCC: 5 | RNVC: 2

18 Jul 2006

5120-12-185-5888
Socket Wrench Set

121855888
101-0-M: RNCC: 3 | RNVC: 2
D32EMZ: RNCC: 3 | RNVC: 2
H01.027799: RNCC: 5 | RNVC: 2
00101000080: RNCC: 5 | RNVC: 2
628026: RNCC: 5 | RNVC: 2
01.0277.99: RNCC: 5 | RNVC: 9

16 Oct 1980

5120-12-369-3250
Tacker

123693250
2-69-702: RNCC: 3 | RNVC: 2

21 Jun 2006

5120-12-364-1825
Dreh Haltewerkzeug

123641825
F6557146: RNCC: 3 | RNVC: 2

28 Aug 2004

5120-12-388-0594
Crimping Tool Die

123880594
1185-03101: RNCC: 3 | RNVC: 2
80.99625-0100: RNCC: 5 | RNVC: 2
80996250100: RNCC: 5 | RNVC: 2

22 Feb 2012

5120-12-174-7229
Screwdriver Handle

121747229
DIN5268-D28: RNCC: 2 | RNVC: 2
D28DIN5268: RNCC: 2 | RNVC: 9

25 Jul 1978

5120-12-364-9567
Swivel Knob Jeweler's Screwdriver

123649567
T4877XESDTX05X50: RNCC: 3 | RNVC: 2

18 Nov 2004

5120-12-195-2911
Verbindungs- Huelse

121952911
4900137-350000.001: RNCC: 2 | RNVC: 2
009-082.200-001: RNCC: 3 | RNVC: 2
4900137-350000.001: RNCC: 5 | RNVC: 2
009-082.200-001: RNCC: 5 | RNVC: 9
4900137-350000-001: RNCC: 5 | RNVC: 9

7 Feb 1983

5120-12-309-5015
Piston Ring Compressor

123095015
790-3: RNCC: 3 | RNVC: 2
5753630004: RNCC: 5 | RNVC: 2

29 Jan 1987

5120-12-153-4990
Ausbauvorrichtung

121534990
CH1919-16: RNCC: 3 | RNVC: 2
12189257: RNCC: 5 | RNVC: 2
6-0888-01-1-0204: RNCC: 5 | RNVC: 9
6.0888.01.1.0204: RNCC: 5 | RNVC: 9
CH1919-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-184-7835
Flat Tip Screwdriver

121847835
B1-6X10DIN5265: RNCC: 2 | RNVC: 9
536VSM-1,6X10X30: RNCC: 3 | RNVC: 9
136/4-10X40: RNCC: 5 | RNVC: 9
125015: RNCC: 5 | RNVC: 9
DIN5265-B1,6X10: RNCC: 5 | RNVC: 9

16 Aug 1980

5120-12-362-7203
Slip Joint Pliers

123627203
8223-210: RNCC: 3 | RNVC: 2

23 Mar 2004

5120-12-171-5368
Spanner Wrench

121715368
1238-08.4W2: RNCC: 3 | RNVC: 2
1238-08-4W2: RNCC: 5 | RNVC: 2
1238-08-4W2: RNCC: 5 | RNVC: 9
1238-08.4W2: RNCC: 5 | RNVC: 9

21 Oct 1977

5120-12-135-0035
Box Wrench

121350035
NO PRIMARY REF 12-135-0035: RNCC: 3 | RNVC: 2
4-409: RNCC: 5 | RNVC: 9
4-7-16X1-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-5648
Open End Wrench

123645648
40061212-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-319-9706
Bearing And Bushing Inserter

123199706
126589003500: RNCC: 3 | RNVC: 2
0930170: RNCC: 5 | RNVC: 2
0930170: RNCC: 5 | RNVC: 9

23 Nov 1989

5120-12-363-8162
Bearing And Bushing Inserter And Remover

123638162
T671P5002101: RNCC: 3 | RNVC: 2

28 Jul 2004

5120-12-358-8662
Plug Electrical Connector Extractor

123588662
80996060439: RNCC: 3 | RNVC: 2

22 Nov 2002

5120-12-044-4875

5120-12-328-4580
Rack Bar Jack

123284580
1350.10.17.30: RNCC: 3 | RNVC: 2

21 May 1992

5120-12-305-3542
Screw Thread Insert Inserter

123053542
01500235000: RNCC: 3 | RNVC: 2

25 Oct 1985

5120-12-170-9754
Pliers

121709754
2477EB: RNCC: 3 | RNVC: 9
106390: RNCC: 5 | RNVC: 9

26 Aug 1977

5120-12-390-0632
Spanner Wrench

123900632
KV2043: RNCC: 3 | RNVC: 2

28 Sep 2012

5120-12-335-4945
Lamp Extractor

123354945
K44-1994: RNCC: 3 | RNVC: 2
4.7110: RNCC: 5 | RNVC: 2

23 Aug 1994

5120-12-145-9291
Fuse Puller

121459291
DIN43620-GRIFF00-3: RNCC: 2 | RNVC: 2
3NX1011: RNCC: 3 | RNVC: 2
910-691-083: RNCC: 3 | RNVC: 9
3NX1-010: RNCC: 5 | RNVC: 2
3NX1010: RNCC: 5 | RNVC: 2
3NX1-010: RNCC: 5 | RNVC: 9
R1229: RNCC: 5 | RNVC: 9
GRIFF00-3DIN43620: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-700-4424
Spanner Wrench

127004424
51-083032044: RNCC: 2 | RNVC: 2
765.93.289: RNCC: 5 | RNVC: 9

3 Jun 1992

5120-12-190-8238
Abziehvorrichtung

121908238
420090: RNCC: 3 | RNVC: 2

16 Dec 1981

5120-12-133-6671

5120-12-386-8655
Spanner Wrench

123868655
1.000.4558: RNCC: 3 | RNVC: 2
1.000.4558: RNCC: 5 | RNVC: 2

10 Oct 2011

5120-12-150-3928
P Haltevorrichtung

121503928
1X46900222: RNCC: 3 | RNVC: 2
V90022-2: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-334-2790
Screwdriver Bit

123342790
2321-9: RNCC: 3 | RNVC: 2
3676140005: RNCC: 5 | RNVC: 2

21 Apr 1994

5120-12-369-8788
Torque Wrench Adapter

123698788
447-9: RNCC: 3 | RNVC: 2
02181009: RNCC: 5 | RNVC: 2

23 Aug 2006

5120-12-150-4291
Dorn

121504291
838589054300: RNCC: 3 | RNVC: 2
8385890543: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-195-5127
Ph Schraubendreher

121955127
563: RNCC: 3 | RNVC: 2
246 VDE 3,5X100: RNCC: 3 | RNVC: 9
05605: RNCC: 5 | RNVC: 9
2250: RNCC: 5 | RNVC: 9
52722-050/4: RNCC: 5 | RNVC: 9

7 Mar 1983

5120-12-326-1446
Seal Inserter

123261446
F30149066: RNCC: 3 | RNVC: 2

12 Aug 1991

5120-12-199-7133
Spanner Wrench

121997133
209M6-S: RNCC: 3 | RNVC: 2
5100224: RNCC: 5 | RNVC: 2

24 May 1984

5120-12-339-7379
Socket Wrench Crowfoot Attachment

123397379
4550-1: RNCC: 3 | RNVC: 2
5719650004: RNCC: 5 | RNVC: 2

9 Jan 1996

5120-12-177-8365
Bremsbel Auszieher

121778365
1966-1: RNCC: 3 | RNVC: 9
57361: RNCC: 5 | RNVC: 2
5738720001: RNCC: 5 | RNVC: 9

28 Feb 1979

5120-12-358-2511
Screwdriver Bit

123582511
614787255: RNCC: 3 | RNVC: 2
614 787 255: RNCC: 5 | RNVC: 2

1 Oct 2002

5120-12-348-5550
Mechanical Puller

123485550
K60/3: RNCC: 3 | RNVC: 2
02.0125.01.00: RNCC: 5 | RNVC: 2

15 Jul 1999

5120-12-152-7678

5120-12-306-5891
Combination Box And Open End Wrench

123065891
1B-2 1/16AF: RNCC: 3 | RNVC: 2
600792: RNCC: 5 | RNVC: 2

12 Mar 1986

5120-12-129-0677
Crowfoot Wrench Head Socket

121290677
NO PRIMARY REF 12-129-0677: RNCC: 3 | RNVC: 2
108377: RNCC: 5 | RNVC: 9
5110Z1-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-336-7262
Spanner Wrench

123367262
764-C80-125/8: RNCC: 3 | RNVC: 2
41103: RNCC: 5 | RNVC: 2

14 Dec 1994

5120-12-330-1194
Ge Montierwerkzeug

123301194
80.99612.0013: RNCC: 3 | RNVC: 2
1X56137246: RNCC: 3 | RNVC: 2
80996120013: RNCC: 5 | RNVC: 2
4900057: RNCC: 5 | RNVC: 2
56137246: RNCC: 5 | RNVC: 2

5 Nov 1992

5120-12-321-6686
Inspection Mirror

123216686
54166: RNCC: 3 | RNVC: 2
662330: RNCC: 5 | RNVC: 2

13 Jun 1990

5120-12-192-6292
Spreizer

121926292
4976008: RNCC: 3 | RNVC: 2
4976008: RNCC: 3 | RNVC: 2
MAGERD 5139: RNCC: 5 | RNVC: 9

10 May 1982

5120-12-387-8239
Bearing And Bushing Inserter

123878239
F30378152: RNCC: 3 | RNVC: 2

1 Feb 2012

5120-12-319-6372
Spanner Wrench

123196372
00.005.0: RNCC: 3 | RNVC: 2
700.005.0: RNCC: 5 | RNVC: 2

19 Oct 1989

5120-12-317-6024
Pin Inserter

123176024
530016: RNCC: 2 | RNVC: 9

20 Apr 1989

5120-12-147-4331
Face Spanner Wrench Socket

121474331
1X46090039: RNCC: 3 | RNVC: 2
V90039-1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-146-5143

5120-12-146-5144
Spanner Wrench

121465144
1X56103774: RNCC: 3 | RNVC: 2
8207202: RNCC: 5 | RNVC: 2
8470103: RNCC: 5 | RNVC: 2
V103774: RNCC: 5 | RNVC: 2
0535774: RNCC: 5 | RNVC: 2
83.09143.0102: RNCC: 5 | RNVC: 9
W73632: RNCC: 5 | RNVC: 9
535774: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-2694
Oe Stanz- Stempel

121332694
STPLL4: RNCC: 3 | RNVC: 2
STPLL4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-392-1773
Mecha Ejector Tool

123921773
96746232: RNCC: 3 | RNVC: 2

13 May 2013

5120-12-338-5275
Aufweit Spannbacke

123385275
608389: RNCC: 3 | RNVC: 2

24 Jul 1995

5120-12-363-9287
Bearing And Bushing Inserter

123639287
T670P5001295: RNCC: 3 | RNVC: 2

5 Aug 2004

5120-12-368-1009
Swivel Knob Jeweler's Screwdriver

123681009
47510008-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-365-9176
Swivel Knob Jeweler's Screwdriver

123659176
T4873X 30: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-175-5306
Machinist's Vise

121755306
HEUERFR0NT90MMFEST: RNCC: 3 | RNVC: 2
HEUERFR0NT90MMFEST: RNCC: 5 | RNVC: 9

25 Sep 1978

5120-12-186-7322
Abziehvorrichtung

121867322
99346213: RNCC: 3 | RNVC: 2
420070: RNCC: 5 | RNVC: 9
420070: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-356-8122
Socket Wrench

123568122
7D0012219: RNCC: 3 | RNVC: 2

8 Apr 2002

5120-12-389-5077
Torque Wrench Adapter

123895077
R809226: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-389-5312
Socket Head Screw Key

123895312
48560008-TCS: RNCC: 3 | RNVC: 2

18 Jul 2012

5120-12-307-1921
Hyd Ausbauwerkzeug

123071921
320-991440: RNCC: 3 | RNVC: 2

21 May 1986

5120-12-150-4481
Montagevorrichtung

121504481
838589005900: RNCC: 3 | RNVC: 2
8385890059: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-094-0215

5120-12-392-4620
Electronic Equipment Alignment Tool

123924620
T4847 0: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-12-384-9328
Aufweitwer Einsatz

123849328
1.1028: RNCC: 3 | RNVC: 2

12 Apr 2011

5120-12-382-5723
Socket Wrench Socket

123825723
05010046-TCS: RNCC: 3 | RNVC: 2

12 Jul 2010

5120-12-384-8446
Pipe Mounting Tool

123848446
W10: RNCC: 3 | RNVC: 2

4 Apr 2011

5120-12-121-6667
Sheet Metal Workers' Tongs

121216667
031A251: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-336-5503

5120-12-358-1993
Flat Tip And Cross Tip Screwdriver Set

123581993
61394226: RNCC: 3 | RNVC: 2
613 942 26: RNCC: 5 | RNVC: 2

25 Sep 2002

5120-12-325-7086
Dreh Haltewerkzeug

123257086
F6452209: RNCC: 3 | RNVC: 2

2 Jul 1991

5120-12-372-2281
Hand Tube Swaging Tool Kit

123722281
268630-001: RNCC: 3 | RNVC: 2

28 Jun 2007

5120-12-350-0998
Sp Montierwerkzeug

123500998
AFG072131-01: RNCC: 3 | RNVC: 2

15 Feb 2000

5120-12-340-8824
Socket Wrench Set

123408824
4105: RNCC: 3 | RNVC: 2
41050002: RNCC: 5 | RNVC: 2

27 Jun 1996

5120-12-305-8600
Bearing And Bushing Inserter

123058600
4900059-752040.000.0: RNCC: 2 | RNVC: 2
4900059-752040.000.0: RNCC: 3 | RNVC: 2

27 Dec 1985

5120-12-346-9011
Splicing Sleeve Compressing Tool

123469011
NT10CGMP: RNCC: 3 | RNVC: 2

23 Sep 1998

5120-12-129-5607

5120-12-198-6585
Aufweitwer Einsatz

121986585
234 306: RNCC: 3 | RNVC: 2

17 Feb 1984

5120-12-345-3062
We Montierwerkzeug

123453062
Y4 098566: RNCC: 3 | RNVC: 2

2 Mar 1998

5120-12-365-9723
Socket Wrench Socket

123659723
01010032-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-388-5169
Socket Wrench Socket

123885169
221.143: RNCC: 3 | RNVC: 2
221.143: RNCC: 5 | RNVC: 2

28 Mar 2012

5120-12-146-7423

5120-12-196-7391
Seal Inserter

121967391
1X56126469: RNCC: 3 | RNVC: 2
0535925: RNCC: 5 | RNVC: 2
535925: RNCC: 5 | RNVC: 9

9 Aug 1983

5120-12-341-1153
Socket Wrench Set

123411153
A7440DZ: RNCC: 3 | RNVC: 2
1831424: RNCC: 5 | RNVC: 2

30 Jul 1996

5120-12-316-1455
Mechanical Puller Attachment

123161455
1X56122313: RNCC: 3 | RNVC: 2

24 Dec 1988

5120-12-391-4358
Open End Wrench

123914358
6672770: RNCC: 3 | RNVC: 2
04010886667279: RNCC: 5 | RNVC: 2
6672770: RNCC: 5 | RNVC: 2
DS 3114 27: RNCC: 5 | RNVC: 2
04010886667279: RNCC: 5 | RNVC: 2
DS 3114 27: RNCC: 5 | RNVC: 2
4010886667279: RNCC: 5 | RNVC: 9
4010886667279: RNCC: 5 | RNVC: 9

12 Mar 2013

5120-12-147-4326
Ei Vorspann- Huelse

121474326
01500610032: RNCC: 3 | RNVC: 2
01556100021: RNCC: 5 | RNVC: 9
UV110: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-351-4158
Socket Wrench Extension

123514158
2995.20.84: RNCC: 2 | RNVC: 2
2995.20.84: RNCC: 3 | RNVC: 2

25 Jul 2000

5120-12-120-5741
Sand And Gravel Scoop

121205741
DIN20120-0: RNCC: 2 | RNVC: 2
55-0: RNCC: 3 | RNVC: 2
0DIN20120: RNCC: 5 | RNVC: 9
ODIN20120: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-8970
Ges Schluesselteil

121998970
412-3282-12: RNCC: 3 | RNVC: 2

14 Jun 1984

5120-12-193-5706
Mechanical Puller

121935706
3S55110 0000: RNCC: 3 | RNVC: 2
3S55110-0000: RNCC: 3 | RNVC: 2
MAGERD 1537: RNCC: 5 | RNVC: 2

4 Aug 1982

5120-12-368-6465
Box Wrench

123686465
110A-1.5/16X1.3/8: RNCC: 3 | RNVC: 2
00.26.80.61: RNCC: 5 | RNVC: 2

3 Apr 2006

5120-12-314-2328
Boerdelwer Einsatz

123142328
4597-52: RNCC: 3 | RNVC: 2
1652: RNCC: 3 | RNVC: 2

17 Jun 1988

5120-12-371-5153
Mechanical Puller

123715153
71007532: RNCC: 3 | RNVC: 2

11 Apr 2007

5120-12-368-3094
Ge Montierwerkzeug

123683094
4615800301: RNCC: 3 | RNVC: 2

15 Feb 2006

5120-12-345-3256
Bearing And Bushing Inserter

123453256
F3 0275385: RNCC: 3 | RNVC: 2

3 Mar 1998

5120-12-135-3729
Body And Fender Spoon

121353729
031A327: RNCC: 3 | RNVC: 2
3039: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-3117
Zu Anschluszstueck

121393117
8205894163: RNCC: 3 | RNVC: 2
073M00400: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-385-6694
Bearing And Bushing Inserter And Remover

123856694
B80141489: RNCC: 3 | RNVC: 2

29 Jun 2011

5120-12-336-5858
Montierdorn

123365858
0852 0711: RNCC: 3 | RNVC: 2
8520711: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-374-6395
Pull And Press Tool

123746395
F0099977: RNCC: 3 | RNVC: 2

3 Mar 2008

5120-12-374-5413
Electrical Lead Fishing Tool

123745413
103504: RNCC: 3 | RNVC: 2

25 Feb 2008

5120-12-363-6157
Drive Pin Punch

123636157
T631P3005120: RNCC: 3 | RNVC: 2

9 Jul 2004

5120-12-370-1578
Blindni Mundstueck

123701578
7051271: RNCC: 3 | RNVC: 2

26 Sep 2006

5120-12-388-5838
Mounting Lever

123885838
MHLXXSA610: RNCC: 3 | RNVC: 2

3 Apr 2012

5120-12-387-6547
Bearing And Bushing Inserter

123876547
T671P5002133: RNCC: 3 | RNVC: 2

20 Jan 2012

5120-12-314-8467
Montage- Hebel

123148467
83091400009: RNCC: 3 | RNVC: 2
5000254236: RNCC: 5 | RNVC: 2

17 Aug 1988

5120-12-335-3756
Heber Stuetze

123353756
2300223-264320.00.0: RNCC: 2 | RNVC: 2
WRSOM0477: RNCC: 3 | RNVC: 2
2300223-264320.00.0: RNCC: 3 | RNVC: 2

15 Aug 1994

5120-12-380-2481
Hand Roller

123802481
125.590: RNCC: 3 | RNVC: 2

9 Oct 2009

5120-12-153-5072
Montagestutzen

121535072
V0M022L: RNCC: 3 | RNVC: 2
V0RM0NTAGESTUTZEN22L: RNCC: 5 | RNVC: 2
909129409: RNCC: 5 | RNVC: 2
101739: RNCC: 5 | RNVC: 2
V0M022L: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-2560
Pliers

121262560
NO PRIMARY REF 12-126-2560: RNCC: 3 | RNVC: 2
106386: RNCC: 5 | RNVC: 9
2477CB: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-0670
Socket Wrench

121290670
NO PRIMARY REF 12-129-0670: RNCC: 3 | RNVC: 2
105190: RNCC: 5 | RNVC: 9
1937M10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-304-7559
Piston Inserter

123047559
0376649: RNCC: 3 | RNVC: 2
80996350035: RNCC: 5 | RNVC: 2
80.99635-0035: RNCC: 5 | RNVC: 9

19 Aug 1985

5120-12-137-8907
Kurb Durchdrehrohr

121378907
259128J2: RNCC: 3 | RNVC: 2
259128J2: RNCC: 3 | RNVC: 2
6100008-33-09: RNCC: 5 | RNVC: 2
0331 8230: RNCC: 5 | RNVC: 2
3318230EE0144-49: RNCC: 5 | RNVC: 2
409400682: RNCC: 5 | RNVC: 9
3318230: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-342-6540
Auswechselwe Griff

123426540
A08A3E-501: RNCC: 3 | RNVC: 2

12 Mar 1997

5120-12-192-2260
Open End Wrench

121922260
50041087: RNCC: 3 | RNVC: 2
50041087: RNCC: 5 | RNVC: 9

1 Apr 1982

5120-12-313-6930

5120-12-193-4246
Bearing And Bushing Inserter

121934246
460589061500: RNCC: 3 | RNVC: 2

21 Jul 1982

5120-12-176-1325
Socket Head Screw Key

121761325
C1997M2: RNCC: 3 | RNVC: 2
148458: RNCC: 5 | RNVC: 2
C1997M2MM: RNCC: 6 | RNVC: 9

9 Nov 1978

5120-12-155-9526
Pliers

121559526
NM271: RNCC: 3 | RNVC: 2
FF0631800C: RNCC: 5 | RNVC: 2
NM271: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-344-6439
Seal Inserter

123446439
99374390: RNCC: 3 | RNVC: 2

19 Nov 1997

5120-12-343-6378
Socket Wrench Socket

123436378
130424: RNCC: 3 | RNVC: 2

10 Jul 1997

5120-12-165-7078
Abzieher

121657078
305-4910: RNCC: 3 | RNVC: 2

22 Jun 1976

5120-12-171-2816
Druckstueck

121712816
105-31702W4.02: RNCC: 3 | RNVC: 2
105-31702W4-02: RNCC: 5 | RNVC: 2

26 Sep 1977

5120-12-140-5833
Box Wrench

121405833
E8101: RNCC: 3 | RNVC: 2
T11E8191: RNCC: 5 | RNVC: 2
T11E8191: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-2227
Tool

123052227
4983044: RNCC: 3 | RNVC: 2

9 Oct 1985

5120-12-305-4888
Bearing And Bushing Inserter

123054888
316589004300: RNCC: 3 | RNVC: 2

13 Nov 1985

5120-12-358-2647
Screwdriver Bit

123582647
614784055: RNCC: 3 | RNVC: 2
614 784 055: RNCC: 5 | RNVC: 2

2 Oct 2002

5120-12-383-4905
Timber Wedge

123834905
13408: RNCC: 3 | RNVC: 2
575 80 58-01: RNCC: 5 | RNVC: 2

27 Oct 2010

5120-12-377-9216
Spanner Wrench

123779216
5120-0032-000000: RNCC: 3 | RNVC: 2

25 Feb 2009

5120-12-339-9592
W Spannvorrichtung

123399592
5069594: RNCC: 3 | RNVC: 2
698-440-0011: RNCC: 5 | RNVC: 2

6 Feb 1996

5120-12-341-6185
Sheet Metalworking Stake

123416185
143A60: RNCC: 3 | RNVC: 2
1431060: RNCC: 5 | RNVC: 2

2 Oct 1996

5120-12-168-1499
Screw Thread Insert Inserter

121681499
01500408000: RNCC: 3 | RNVC: 2
F3 0005120: RNCC: 5 | RNVC: 2
01552080000: RNCC: 5 | RNVC: 9

23 Feb 1977

5120-12-023-2540

5120-12-148-3099
Inspection Mirror

121483099
5524N: RNCC: 3 | RNVC: 2
108713: RNCC: 5 | RNVC: 2
5524N: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-344-0104
Socket Wrench Handle

123440104
10110016: RNCC: 3 | RNVC: 2

28 Aug 1997

5120-12-374-4078
Hand Optical Fiber Burnisher

123744078
CLETOP-SK2: RNCC: 3 | RNVC: 2

14 Feb 2008

5120-12-131-4392
Socket Wrench Screwdriver Attachment

121314392
3210-IN 1/4: RNCC: 3 | RNVC: 2
IN19-1-4: RNCC: 3 | RNVC: 2
54A1-4: RNCC: 3 | RNVC: 2
50-31-1/4: RNCC: 3 | RNVC: 2
03450016: RNCC: 5 | RNVC: 2
00.49.84.37: RNCC: 5 | RNVC: 2
00050313483: RNCC: 5 | RNVC: 2
TVA5120-2-263-037-1.1.43: RNCC: 5 | RNVC: 2
TVA5120-2-263-038-1.1.3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-373-4302
Seal Installation Tool

123734302
1X54176702: RNCC: 3 | RNVC: 2
1X54176702: RNCC: 5 | RNVC: 2

31 Oct 2007

5120-12-334-5391
Mechanical Puller Attachment

123345391
0853 0170.006: RNCC: 3 | RNVC: 2

20 May 1994

5120-12-341-4045
Socket Wrench Socket

123414045
56-21: RNCC: 3 | RNVC: 2
05020021: RNCC: 5 | RNVC: 2

31 Aug 1996

5120-12-194-1932
Bearing And Bushing Inserter

121941932
3S51449-0000: RNCC: 3 | RNVC: 2
MAGERD 1629: RNCC: 5 | RNVC: 9

11 Oct 1982

5120-12-151-6511
Schw Ring Einsatz

121516511
23111-7156.05: RNCC: 2 | RNVC: 2
23111-7156.05: RNCC: 3 | RNVC: 2
23111-7156-05: RNCC: 5 | RNVC: 9
23111-7156.05: RNCC: 5 | RNVC: 9
23111-7156-05: RNCC: 5 | RNVC: 9
23111-7156-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-2606
Drive Pin Punch

123682606
JDMS6-125: RNCC: 3 | RNVC: 2

18 Jan 2006

5120-12-191-3533
Hebevorrichtung

121913533
NO PRIMARY REF 12-191-3533: RNCC: 3 | RNVC: 2
2350: RNCC: 5 | RNVC: 9

26 Jan 1982

5120-12-165-5214
Schluessel

121655214
7310-006-2-20: RNCC: 5 | RNVC: 9
G42074: RNCC: 5 | RNVC: 9

25 May 1976

5120-12-152-1495
Plug Electrical Connector Extractor

121521495
52-0039-100-06: RNCC: 3 | RNVC: 2
52.0039.100.06: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-130-7395
Ratchet Screwdriver

121307395
VG95211-ML-121307395: RNCC: 2 | RNVC: 2
5000010: RNCC: 3 | RNVC: 2
52870200: RNCC: 5 | RNVC: 2
67053-500: RNCC: 5 | RNVC: 2
230-7X490: RNCC: 5 | RNVC: 2
1030AS500: RNCC: 5 | RNVC: 2
25205: RNCC: 5 | RNVC: 2
130AS: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-385-4780
Torque Wrench

123854780
1957694: RNCC: 3 | RNVC: 2
753-11: RNCC: 5 | RNVC: 2
753-11: RNCC: 5 | RNVC: 2
1957694: RNCC: 5 | RNVC: 2
5120-01320: RNCC: 6 | RNVC: 9

8 Jun 2011

5120-12-336-7644
Hand Hammer

123367644
21329: RNCC: 3 | RNVC: 2

21 Dec 1994

5120-12-344-6010
Bearing And Bushing Inserter

123446010
1X56136450: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-147-4328
Ei Vorspann- Huelse

121474328
01500614932: RNCC: 3 | RNVC: 2
01556149021: RNCC: 5 | RNVC: 9
UV514: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5510

5120-12-092-3885

5120-12-158-0803
Socket Wrench

121580803
580091014: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-378-7356
Mechanical Puller

123787356
106796: RNCC: 3 | RNVC: 2

7 May 2009

5120-12-382-2198
Pliers

123822198
0631800C: RNCC: 3 | RNVC: 2

21 May 2010

5120-12-331-8509
Spanner Wrench

123318509
4569: RNCC: 3 | RNVC: 2

28 Jun 1993

5120-12-389-5056
Torque Wrench Adapter

123895056
R819951: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-377-0332
Wire Pike Handle

123770332
1030: RNCC: 3 | RNVC: 2

8 Dec 2008

5120-12-198-6575
Aufweit Spannbacke

121986575
234 102: RNCC: 3 | RNVC: 2

17 Feb 1984

5120-12-157-3293
Montagevorrichtung

121573293
05895: RNCC: 3 | RNVC: 2
05895: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-157-2604
Socket Wrench Crowfoot Attachment

121572604
3055795R2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-176-7228
Schluessel

121767228
84032-19: RNCC: 3 | RNVC: 2
84032-19: RNCC: 5 | RNVC: 9

15 Dec 1978

5120-12-351-2766
Auswechs Klemmteil

123512766
3099-00-171000.07: RNCC: 3 | RNVC: 2
3099-00-17100.07: RNCC: 5 | RNVC: 9

10 Jul 2000

5120-12-355-3189
Spanner Wrench

123553189
4185771: RNCC: 3 | RNVC: 2
6503.201.10.11.000: RNCC: 5 | RNVC: 2

31 Oct 2001

5120-12-174-5322

5120-12-370-3104
Joint Breaking Wedge

123703104
601589076300: RNCC: 3 | RNVC: 2

25 Oct 2006

5120-12-353-6147
Montierdorn

123536147
9256884000: RNCC: 3 | RNVC: 2

17 Apr 2001

5120-12-325-6385
Jaw Cable Grip

123256385
12313: RNCC: 3 | RNVC: 2
1231: RNCC: 5 | RNVC: 2

26 Jun 1991

5120-12-375-3852
Mounting Lever

123753852
7849000060AA: RNCC: 3 | RNVC: 2

27 May 2008

5120-12-371-7532
Electronics Pliers

123717532
65269120: RNCC: 3 | RNVC: 2
65269120: RNCC: 5 | RNVC: 2

10 May 2007

5120-12-333-8679
Schluesseleinsatz

123338679
346589000702: RNCC: 3 | RNVC: 2

18 Feb 1994

5120-12-394-4468
Torque Wrench

123944468
182.2126831000: RNCC: 3 | RNVC: 2

3 Dec 2013

5120-12-170-8647
Spanner Wrench

121708647
205400: RNCC: 3 | RNVC: 2
205400: RNCC: 5 | RNVC: 2
205400: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-185-5942
Spanner Wrench

121855942
V7060-023-000-16: RNCC: 3 | RNVC: 2

16 Oct 1980

5120-12-388-3120
Torque Wrench

123883120
05077004001: RNCC: 3 | RNVC: 2
7115C DS: RNCC: 5 | RNVC: 2
5120-40522: RNCC: 6 | RNVC: 9

12 Mar 2012

5120-12-157-7821
Schluessel

121577821
050107: RNCC: 3 | RNVC: 2
WZ62: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-369-4674
Flat Tip Screwdriver

123694674
66013: RNCC: 3 | RNVC: 2
01.71.93.24: RNCC: 5 | RNVC: 2

6 Jul 2006

5120-12-319-9810
Rivet Bucking Bar

123199810
670: RNCC: 3 | RNVC: 2

24 Nov 1989

5120-12-390-5658
Mechanical Puller Adapter

123905658
0889517-9: RNCC: 3 | RNVC: 2
0889517-9: RNCC: 5 | RNVC: 2

23 Nov 2012

5120-12-313-8622
Fixed Open End Wrench Set

123138622
100-8A: RNCC: 3 | RNVC: 2

14 May 1988

5120-12-333-8531
Drive Pin Punch

123338531
312589181500: RNCC: 3 | RNVC: 2

17 Feb 1994

5120-12-140-3015

5120-12-364-6789
Socket Wrench Socket

123646789
03010017-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-333-5912
Face Spanner Wrench Socket

123335912
03960W1: RNCC: 3 | RNVC: 2

11 Jan 1994

5120-12-382-3159
Socket Head Screw Key

123823159
1115821: RNCC: 3 | RNVC: 2

7 Jun 2010

5120-12-369-7383
Montierdorn

123697383
405589031500: RNCC: 3 | RNVC: 2
7083640: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-155-8802
Pin Vise

121558802
4512012: RNCC: 3 | RNVC: 2
3788: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-4664
Hand Screw Jack

121264664
EL70: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-192-8054
Bearing And Bushing Inserter

121928054
352 589 04 15 00: RNCC: 3 | RNVC: 2
352589041500: RNCC: 3 | RNVC: 2

26 May 1982

5120-12-380-2840
Screwdriver Bit

123802840
00598: RNCC: 3 | RNVC: 2
269-T7-T9: RNCC: 5 | RNVC: 2

15 Oct 2009

5120-12-343-3846
Box Wrench

123433846
437589000300: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-383-8385
Spatula

123838385
1400030C: RNCC: 3 | RNVC: 2

13 Dec 2010

5120-12-173-2380
Machinist's Vise

121732380
51030032: RNCC: 3 | RNVC: 9
51030GR3A: RNCC: 5 | RNVC: 9

29 Mar 1978

5120-12-364-9582
Swivel Knob Jeweler's Screwdriver

123649582
T4838XESD25: RNCC: 3 | RNVC: 2

18 Nov 2004

5120-12-176-2800
Adapter

121762800
23290-268030: RNCC: 2 | RNVC: 2
V4940100800: RNCC: 3 | RNVC: 2
23290-268030: RNCC: 5 | RNVC: 9

23 Nov 1978

5120-12-157-3297
Dorn

121573297
06427: RNCC: 3 | RNVC: 2
06427: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-157-1659
Mechanical Puller

121571659
1165891033: RNCC: 3 | RNVC: 2
0005891733: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-023-1486

5120-12-385-5553
Pedal Adjustment Tool Compressor

123855553
F30370803: RNCC: 3 | RNVC: 2

15 Jun 2011

5120-12-334-2165
Hand Shovel

123342165
WRSOM0142: RNCC: 3 | RNVC: 2

13 Apr 1994

5120-12-312-5341
Auswechselwe Griff

123125341
061124: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-12-367-7124
Socket Wrench Set

123677124
19IMU-10: RNCC: 3 | RNVC: 2
6139750: RNCC: 5 | RNVC: 2

28 Sep 2005

5120-12-348-7347
Socket Wrench Extension

123487347
F30372020: RNCC: 3 | RNVC: 2

11 Aug 1999

5120-12-354-9942
W Spannvorrichtung

123549942
80996066078: RNCC: 3 | RNVC: 2
WW2 S250 16: RNCC: 5 | RNVC: 2

18 Sep 2001

5120-12-314-9538
Mechanical Puller

123149538
45-4: RNCC: 3 | RNVC: 2

1 Sep 1988

5120-12-328-5707
Dapping Punch

123285707
F30096496: RNCC: 3 | RNVC: 2

3 Jun 1992

5120-12-143-3036
Socket Wrench

121433036
RELWZ38A: RNCC: 3 | RNVC: 2
RELWZ38A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-092-2271

5120-12-363-8363
Bearing And Bushing Inserter And Remover

123638363
T671P5001112: RNCC: 3 | RNVC: 2

29 Jul 2004

Load More Results