What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 25 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 25 of 62

5120-12-373-2047
Tire Iron

123732047
650K-20: RNCC: 3 | RNVC: 2

9 Oct 2007

5120-12-127-4649
Drehmome Pruefstab

121274649
NO PRIMARY REF 12-127-4649: RNCC: 3 | RNVC: 2
30: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-094-1235

5120-12-041-2681

5120-12-133-3863
Box Wrench

121333863
1300Z7-8X15-16: RNCC: 3 | RNVC: 2
104003: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-313-7910
Ratchet Wrench

123137910
31KR16: RNCC: 3 | RNVC: 2
625 396: RNCC: 5 | RNVC: 2

5 May 1988

5120-12-320-6268
Mechanical Puller Attachment

123206268
1970-4: RNCC: 3 | RNVC: 2
5798760005: RNCC: 5 | RNVC: 2

1 Feb 1990

5120-12-345-8321
Mechanical Puller

123458321
151400: RNCC: 3 | RNVC: 2

4 May 1998

5120-12-183-9520
Manual Impact Wrench

121839520
05072035001: RNCC: 3 | RNVC: 2
2200: RNCC: 5 | RNVC: 2
72035: RNCC: 5 | RNVC: 9

3 Jun 1980

5120-12-159-4668

5120-12-330-6979
Socket Wrench

123306979
DS49R: RNCC: 3 | RNVC: 2

28 Jan 1993

5120-12-337-9129
Socket Wrench Adapter

123379129
100 589 02 59 00: RNCC: 3 | RNVC: 2

3 May 1995

5120-12-392-4338
Swivel Knob Jeweler's Screwdriver Set

123924338
00504: RNCC: 3 | RNVC: 2
260PK7: RNCC: 5 | RNVC: 2

7 Jun 2013

5120-12-126-3090

5120-12-172-9116
Schluessel

121729116
VG95211-ML-121729116: RNCC: 2 | RNVC: 2
1X56 136 654: RNCC: 3 | RNVC: 2
1X56136654: RNCC: 5 | RNVC: 9

2 Mar 1978

5120-12-303-3213
Seal Inserter

123033213
1202 8198: RNCC: 3 | RNVC: 2
12028198: RNCC: 5 | RNVC: 2
3.0219.01.0.0030: RNCC: 5 | RNVC: 2
3-0219-01-0-0030: RNCC: 5 | RNVC: 9
3.0219.01.0.0030: RNCC: 5 | RNVC: 9

14 Mar 1985

5120-12-171-1934
Montagewerkzeug

121711934
1X56 097 721: RNCC: 3 | RNVC: 2
81.66850-6010: RNCC: 5 | RNVC: 2
81668506010: RNCC: 5 | RNVC: 2
1X56097721: RNCC: 5 | RNVC: 9

16 Sep 1977

5120-12-191-6064
Open End Wrench

121916064
NO PRIMARY REF 12-191-6064: RNCC: 3 | RNVC: 2
609781: RNCC: 5 | RNVC: 9
8M6BA: RNCC: 5 | RNVC: 9

15 Feb 1982

5120-12-161-9255
Socket Wrench

121619255
5M8936-221-23: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-388-0337
Crimping Tool Die

123880337
1181-08101: RNCC: 3 | RNVC: 2
80.99625-0081: RNCC: 5 | RNVC: 2
80996250081: RNCC: 5 | RNVC: 2

17 Feb 2012

5120-12-149-9622
Schluessel

121499622
66286-200: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-181-4007
Open End Wrench

121814007
DIN3114-65: RNCC: 2 | RNVC: 2
65DIN3114: RNCC: 5 | RNVC: 2

19 Nov 1979

5120-12-303-5317
Wire Stretcher

123035317
BSAN001: RNCC: 3 | RNVC: 2
ZBT SPR 005.001: RNCC: 5 | RNVC: 2

2 Apr 1985

5120-12-314-1140
Hand Beading Tool

123141140
4597: RNCC: 3 | RNVC: 2
166: RNCC: 5 | RNVC: 9

8 Jun 1988

5120-12-336-5844
Montierhuelse

123365844
0852 3029: RNCC: 3 | RNVC: 2
8523029: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-365-9165
Swivel Knob Jeweler's Screwdriver

123659165
T4882X 00: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-368-1005
Swivel Knob Jeweler's Screwdriver

123681005
47520020-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-196-7390
Seal Inserter

121967390
1X56136272: RNCC: 3 | RNVC: 2
0535804: RNCC: 5 | RNVC: 2
535804: RNCC: 5 | RNVC: 9

9 Aug 1983

5120-12-318-2051
Ratchet Wrench

123182051
R3-3-VKT22: RNCC: 3 | RNVC: 2

20 Jun 1989

5120-12-150-3933
F Haltevorrichtung

121503933
1X46106162: RNCC: 3 | RNVC: 2
V106162: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-349-3919
Mechanical Puller Attachment

123493919
2300211-991015.000.0: RNCC: 2 | RNVC: 2
2300211-991015.000.0: RNCC: 3 | RNVC: 2

9 Nov 1999

5120-12-392-6813
Mechan Mating Part

123926813
CTP41014G001: RNCC: 3 | RNVC: 2

27 Jun 2013

5120-12-370-6253
Trowel

123706253
749 010 00: RNCC: 3 | RNVC: 2
02.33.63.63: RNCC: 5 | RNVC: 2

1 Dec 2006

5120-12-127-4775

5120-12-338-4050
Eindrueckwerkzeugte

123384050
0851 6220.001: RNCC: 3 | RNVC: 2

4 Jul 1995

5120-12-184-8034
Haken

121848034
1604682006: RNCC: 3 | RNVC: 2
1604682006: RNCC: 5 | RNVC: 2

21 Aug 1980

5120-12-390-4453
Zan Schluesselsatz

123904453
351212203231: RNCC: 3 | RNVC: 2

13 Nov 2012

5120-12-388-6203
Socket Wrench Socket

123886203
880LG-14: RNCC: 3 | RNVC: 2
4000896040759: RNCC: 5 | RNVC: 2

4 Apr 2012

5120-12-358-7705
Socket Wrench Crowfoot Attachment

123587705
J0433782D311-000A1-004: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-386-9973
Spanner Wr Adapter

123869973
66-031-02-0112698: RNCC: 3 | RNVC: 2
10112698: RNCC: 5 | RNVC: 2

25 Oct 2011

5120-12-171-0609
Spanner Wrench

121710609
12706-1240W2: RNCC: 3 | RNVC: 2
12706-1240W2: RNCC: 5 | RNVC: 9

5 Sep 1977

5120-12-335-1947
Eindrueckwerkzeug

123351947
S180ZZ27000-000: RNCC: 3 | RNVC: 2

26 Jul 1994

5120-12-342-2151
Ku Montierwerkzeug

123422151
80996170130: RNCC: 3 | RNVC: 2
80.99617-0130: RNCC: 5 | RNVC: 2

7 Jan 1997

5120-12-319-2323
Tire Iron

123192323
7520005: RNCC: 3 | RNVC: 2
38-24: RNCC: 3 | RNVC: 2
650-24: RNCC: 3 | RNVC: 2
633291: RNCC: 5 | RNVC: 2

14 Sep 1989

5120-12-377-4039
Socket Wrench Set

123774039
113152: RNCC: 3 | RNVC: 2

14 Jan 2009

5120-12-172-0484
Socket Wrench

121720484
425-5: RNCC: 3 | RNVC: 2
6400M5: RNCC: 3 | RNVC: 2
05410005: RNCC: 3 | RNVC: 9
157252: RNCC: 5 | RNVC: 2
1930110018: RNCC: 5 | RNVC: 2
33BPN5: RNCC: 5 | RNVC: 9

13 Dec 1977

5120-12-375-3837
Socket Wrench Adapter

123753837
7789-1: RNCC: 3 | RNVC: 2
58522089: RNCC: 5 | RNVC: 2

27 May 2008

5120-12-197-5639
S Einstellwerkzeug

121975639
TSEB1-3: RNCC: 3 | RNVC: 9
TSEB1-3: RNCC: 5 | RNVC: 2

2 Nov 1983

5120-12-372-8786
Socket Wrench

123728786
10035756: RNCC: 3 | RNVC: 2

31 Aug 2007

5120-12-365-1139
Bearing And Bushing Inserter

123651139
H14831004: RNCC: 3 | RNVC: 2

30 Nov 2004

5120-12-394-3379
Flat Tip Screwdriver

123943379
H02.030911: RNCC: 3 | RNVC: 2

21 Nov 2013

5120-12-343-3833
Dreh Haltewerkzeug

123433833
366589014300: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-342-6102
Crimping Tool Die

123426102
VG95236T11AA103: RNCC: 2 | RNVC: 2
MRP0845: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-147-1993
Eindru Gegenhalter

121471993
92010236: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-135-4022
Socket Head Screw Key

121354022
5185891309: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-010-9666

5120-12-155-0191
Lampenka Auszieher

121550191
5-05800-003: RNCC: 3 | RNVC: 2
5M.8938.220.44: RNCC: 5 | RNVC: 2
5M8938-220-44: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-301-2245
Flat Tip Screwdriver

123012245
140-10X175: RNCC: 3 | RNVC: 2
140-175-10: RNCC: 5 | RNVC: 2

28 Sep 1984

5120-12-378-6857
Socket Wrench

123786857
306903: RNCC: 3 | RNVC: 2
0853-03-02-00/29: RNCC: 5 | RNVC: 2

4 May 2009

5120-12-157-0276
Socket Head Screw Key

121570276
NO PRIMARY REF 12-157-0276: RNCC: 3 | RNVC: 2
954-3-16: RNCC: 5 | RNVC: 9
44905: RNCC: 5 | RNVC: 9
106007: RNCC: 5 | RNVC: 9
1997ZB3-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-373-4108
Brad Awl

123734108
36700: RNCC: 3 | RNVC: 2
4001002367005: RNCC: 5 | RNVC: 2
367-6,0X100: RNCC: 5 | RNVC: 2

30 Oct 2007

5120-12-368-1107
Socket Wrench Handle

123681107
11050010-TCS: RNCC: 3 | RNVC: 2

8 Dec 2005

5120-12-377-9737
Ma Suction Handle

123779737
492617: RNCC: 3 | RNVC: 2
GECKO DOSH: RNCC: 5 | RNVC: 2

3 Mar 2009

5120-12-129-8794
Spanner Wrench

121298794
1687950047: RNCC: 3 | RNVC: 2
EF2212A: RNCC: 5 | RNVC: 2
KDAL5497: RNCC: 5 | RNVC: 9
1687950047: RNCC: 5 | RNVC: 9
EF2212A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-2786
Hand Hammer

123302786
7157210: RNCC: 3 | RNVC: 2
51226040: RNCC: 3 | RNVC: 2

26 Nov 1992

5120-12-330-7427
Drive Pin Punch

123307427
59312: RNCC: 3 | RNVC: 2
790531677: RNCC: 5 | RNVC: 2

3 Feb 1993

5120-12-374-6497
Dreh Winkelscheibe

123746497
F30374287: RNCC: 3 | RNVC: 2

4 Mar 2008

5120-12-388-5647
Mechanical Puller

123885647
2000002-991010.000.0: RNCC: 3 | RNVC: 2

2 Apr 2012

5120-12-002-1378

5120-12-373-3143
Fuse Puller

123733143
140210: RNCC: 3 | RNVC: 2

22 Oct 2007

5120-12-161-8164

5120-12-170-2614

5120-12-146-7585

5120-12-357-7261
Seal Inserter

123577261
9249474000: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-304-5221
Schluesseleinsatz

123045221
31R12: RNCC: 3 | RNVC: 2
624543: RNCC: 5 | RNVC: 2

26 Jul 1985

5120-12-190-6054
Halter

121906054
F6095294: RNCC: 3 | RNVC: 2
F601000095294: RNCC: 5 | RNVC: 2
F601000095294: RNCC: 5 | RNVC: 2
F60095294: RNCC: 5 | RNVC: 9
F601000095294: RNCC: 5 | RNVC: 9

7 Dec 1981

5120-12-329-9659
Mechanical Puller

123299659
0851 8573: RNCC: 3 | RNVC: 2
8518573: RNCC: 5 | RNVC: 2

16 Oct 1992

5120-12-393-6993
Mechanical Puller Body

123936993
A-0261-005-02: RNCC: 3 | RNVC: 2

2 Oct 2013

5120-12-317-6744
Craftsman's Tweezers

123176744
NO PRIMARY REF 12-317-6744: RNCC: 3 | RNVC: 2
5471G: RNCC: 5 | RNVC: 9
5471G-200: RNCC: 5 | RNVC: 9

27 Apr 1989

5120-12-362-2233
Spanner Wrench

123622233
3-0600.183/00-00: RNCC: 3 | RNVC: 2
T280G30T0001: RNCC: 5 | RNVC: 2

26 Jan 2004

5120-12-376-2789
Seal Inserter

123762789
F30372184: RNCC: 3 | RNVC: 2

4 Sep 2008

5120-12-391-1728
Seal Inserter

123911728
F30378879: RNCC: 3 | RNVC: 2

25 Feb 2013

5120-12-389-5307
Flat Tip Screwdriver

123895307
46211040-TCS: RNCC: 3 | RNVC: 2

18 Jul 2012

5120-12-363-9276
Bearing And Bushing Inserter

123639276
T670P5001274: RNCC: 3 | RNVC: 2

5 Aug 2004

5120-12-353-6146
Montierdorn

123536146
9256934000: RNCC: 3 | RNVC: 2

17 Apr 2001

5120-12-192-0301
Spanner Wrench

121920301
4D22309: RNCC: 3 | RNVC: 2
4D22309: RNCC: 5 | RNVC: 2
4D22309: RNCC: 5 | RNVC: 2

22 Mar 1982

5120-12-362-8493
Socket Head Screw Key

123628493
05030124001: RNCC: 3 | RNVC: 2
0041313300: RNCC: 5 | RNVC: 2
1567BO-TX8: RNCC: 5 | RNVC: 2
030124: RNCC: 5 | RNVC: 9

6 Apr 2004

5120-12-335-4094
Socket Wrench Socket

123354094
0852 3000: RNCC: 3 | RNVC: 2
8523000: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-161-4301
Spanner Wrench

121614301
3805024707: RNCC: 3 | RNVC: 2
38050 24707: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-389-5094
Torque Wrench Adapter

123895094
R809235: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-027-2489

5120-12-390-1305
Seal Remover

123901305
437589016100: RNCC: 3 | RNVC: 2

9 Oct 2012

5120-12-341-0016
Fixed Open End Wrench Set

123410016
100/6E: RNCC: 3 | RNVC: 2

16 Jul 1996

5120-12-133-6055
Socket Wrench

121336055
111012203: RNCC: 3 | RNVC: 2
49: RNCC: 5 | RNVC: 9
636045: RNCC: 5 | RNVC: 9
724076: RNCC: 5 | RNVC: 9
08250: RNCC: 5 | RNVC: 9
5719750004: RNCC: 5 | RNVC: 9
764: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-386-0042
Mechanical Puller Attachment

123860042
F6780591: RNCC: 3 | RNVC: 2

28 Jul 2011

5120-12-172-0913
Socket Head Screw Key

121720913
1997LM1-5: RNCC: 3 | RNVC: 2
130212: RNCC: 5 | RNVC: 2

19 Dec 1977

5120-12-368-8234
Socket Wrench Screwdriver Attachment

123688234
3210IN-5/8: RNCC: 3 | RNVC: 2
00.49.90.43: RNCC: 5 | RNVC: 2

25 Apr 2006

5120-12-362-9108
Torque Wrench

123629108
V.A.G.1331: RNCC: 3 | RNVC: 2

14 Apr 2004

5120-12-352-3338
Drive Pin Punch

123523338
22015.0.00.100.00P0S.6: RNCC: 3 | RNVC: 2

8 Nov 2000

5120-12-135-7580
Socket Wrench

121357580
83091527002: RNCC: 3 | RNVC: 2
83.09152-7002: RNCC: 3 | RNVC: 2
83.09152-5010: RNCC: 5 | RNVC: 2
83091525010: RNCC: 5 | RNVC: 2
91.34300-1642: RNCC: 5 | RNVC: 2
91343001642: RNCC: 5 | RNVC: 2
71.32300-1642: RNCC: 5 | RNVC: 2
71323001642: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-137-9486
Blacksmith's Anvil

121379486
14102: RNCC: 3 | RNVC: 2
2354-20: RNCC: 3 | RNVC: 2
2856-20: RNCC: 5 | RNVC: 9
14102: RNCC: 5 | RNVC: 9
2-1H0RN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-131-3944
Dorn

121313944
131-08-00-2: RNCC: 3 | RNVC: 2
510069EB131-08-00-2: RNCC: 5 | RNVC: 2
3901515: RNCC: 5 | RNVC: 2
583901515: RNCC: 5 | RNVC: 9
583901515: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-1355
Socket Wrench

121941355
0503 6656: RNCC: 3 | RNVC: 2

5 Oct 1982

5120-12-020-5576

5120-12-023-1390

5120-12-358-4493
Slip Joint Pliers

123584493
71502331: RNCC: 3 | RNVC: 2
8701300: RNCC: 3 | RNVC: 2

17 Oct 2002

5120-12-365-7608
Socket Head Screw Key

123657608
43252060-TCS: RNCC: 3 | RNVC: 2

1 Feb 2005

5120-12-199-5716
Gewindee Aufweiter

121995716
SRM 1215 S: RNCC: 3 | RNVC: 2
SRM 1215 S: RNCC: 5 | RNVC: 9

15 May 1984

5120-12-370-9437
C Clamp

123709437
10223: RNCC: 3 | RNVC: 2
00.10.37.67: RNCC: 5 | RNVC: 2

18 Jan 2007

5120-12-329-3349
Cross Tip Screwdriver

123293349
142018: RNCC: 3 | RNVC: 2

6 Aug 1992

5120-12-330-0131
Mechanical Puller Attachment

123300131
0851 8032.005: RNCC: 3 | RNVC: 2
8518032.005: RNCC: 5 | RNVC: 2

22 Oct 1992

5120-12-301-6871
Elektron Auszieher

123016871
PUL-IC6/8: RNCC: 3 | RNVC: 2
54174899: RNCC: 5 | RNVC: 2
54701299: RNCC: 5 | RNVC: 2

1 Nov 1984

5120-12-198-3962
Spanner Wrench

121983962
2099322: RNCC: 3 | RNVC: 2
652E-461: RNCC: 5 | RNVC: 2

24 Jan 1984

5120-12-324-6465
Socket Wrench Set

123246465
NO PRIMARY REF 12-324-6465: RNCC: 3 | RNVC: 2
7535Z: RNCC: 5 | RNVC: 9
109627: RNCC: 5 | RNVC: 9

11 Mar 1991

5120-12-178-3285
Open End Wrench

121783285
NO PRIMARY REF 12-178-3285: RNCC: 3 | RNVC: 2
8M7BA: RNCC: 5 | RNVC: 9
12E7BA: RNCC: 5 | RNVC: 9
40769292: RNCC: 5 | RNVC: 9
609773: RNCC: 5 | RNVC: 9

12 Apr 1979

5120-12-331-5302
Torque Wrench Adapter

123315302
RS164-EH: RNCC: 3 | RNVC: 2

17 May 1993

5120-12-324-7594
Bearing And Bushing Remover

123247594
19.0146.190.1001: RNCC: 3 | RNVC: 2
19.0146.190.1001: RNCC: 5 | RNVC: 9

21 Mar 1991

5120-12-383-0963
Hand Hammer

123830963
T530P0001104: RNCC: 3 | RNVC: 2

14 Sep 2010

5120-12-196-9690
Eindrueckwerkzeugte

121969690
1120-31547W1.03: RNCC: 3 | RNVC: 2

6 Sep 1983

5120-12-156-1517
Hand Hammer

121561517
NM238: RNCC: 3 | RNVC: 2
NM238: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-331-6055
Seal Inserter

123316055
80996040087: RNCC: 3 | RNVC: 2
80.99604.0087: RNCC: 5 | RNVC: 2
V1036: RNCC: 5 | RNVC: 2

27 May 1993

5120-12-162-6488

5120-12-335-9390
Mechanical Puller

123359390
0851 4498: RNCC: 3 | RNVC: 2
8514498: RNCC: 5 | RNVC: 2

4 Oct 1994

5120-12-390-4265
Drift Punch

123904265
F30372331: RNCC: 3 | RNVC: 2

12 Nov 2012

5120-12-185-1595
Spanner Wrench

121851595
01TC30061: RNCC: 3 | RNVC: 2

16 Sep 1980

5120-12-363-9552
Bearing And Bushing Inserter And Remover

123639552
T671P5002114: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-024-7157

5120-12-364-6128
Socket Wrench Crowfoot Attachment

123646128
02190016-TCS: RNCC: 3 | RNVC: 2

14 Oct 2004

5120-12-373-1340
Slip Joint Pliers

123731340
9001125: RNCC: 3 | RNVC: 2
00.13.18.57: RNCC: 5 | RNVC: 2

1 Oct 2007

5120-12-021-6092

5120-12-127-9053
Mechanical Puller

121279053
WU74: RNCC: 3 | RNVC: 2
WU74: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-331-6057
Seal Inserter

123316057
80996040088: RNCC: 3 | RNVC: 2
80.99604.0088: RNCC: 5 | RNVC: 2
V1037: RNCC: 5 | RNVC: 2

27 May 1993

5120-12-125-2665

5120-12-373-1623
Tap Extractor Set

123731623
01036: RNCC: 3 | RNVC: 2

4 Oct 2007

5120-12-318-0772
Craftsman's Tweezers

123180772
5476HR: RNCC: 3 | RNVC: 9

8 Jun 1989

5120-12-346-3508
Schluessel

123463508
300-0003-00: RNCC: 3 | RNVC: 2
300.0003.00: RNCC: 5 | RNVC: 2

15 Jul 1998

5120-12-130-7071
Flat Tip Screwdriver

121307071
0804510C: RNCC: 3 | RNVC: 2
C8000-4.5-100: RNCC: 3 | RNVC: 2
1100377: RNCC: 5 | RNVC: 2
C407-Z4-C61: RNCC: 5 | RNVC: 2
290-4,5X100: RNCC: 5 | RNVC: 9
110037: RNCC: 5 | RNVC: 9
1149P100X4,5: RNCC: 5 | RNVC: 9
C8000-0-6X4-5X100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-5416
Einstel Schluessel

121265416
NO PRIMARY REF 12-126-5416: RNCC: 3 | RNVC: 2
0005896409: RNCC: 5 | RNVC: 2
000589640900: RNCC: 5 | RNVC: 2
0005896409: RNCC: 5 | RNVC: 9
328: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-375-5371
Slip Joint Pliers

123755371
87 01 150: RNCC: 3 | RNVC: 2
4003773060116: RNCC: 5 | RNVC: 2
8701150: RNCC: 5 | RNVC: 9

11 Jun 2008

5120-12-352-3310
Hydraulic Jack Handle

123523310
98458382: RNCC: 3 | RNVC: 2

8 Nov 2000

5120-12-139-3132

5120-12-023-1436

5120-12-373-4796
Open End Wrench

123734796
1601091-9000: RNCC: 3 | RNVC: 2

7 Nov 2007

5120-12-133-4367
Montage Bolzen

121334367
4L15454: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-343-8663
Hand Hammer

123438663
2164: RNCC: 3 | RNVC: 2
02164000000: RNCC: 5 | RNVC: 2

7 Aug 1997

5120-12-023-6097

5120-12-316-9941
Driftpin

123169941
126589021500: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-12-330-1213
Mechanical Puller Attachment

123301213
0852 0360.006: RNCC: 3 | RNVC: 2
8520360.006: RNCC: 5 | RNVC: 2

5 Nov 1992

5120-12-361-9965
Inserted Hammer Face

123619965
7157215: RNCC: 3 | RNVC: 2

15 Dec 2003

5120-12-152-8558

5120-12-380-6573
Ratchet Wrench

123806573
503.4819: RNCC: 3 | RNVC: 2

17 Nov 2009

5120-12-123-5885

5120-12-123-5895

5120-12-091-1605

5120-12-311-0623
Seal Inserter

123110623
317589061500: RNCC: 3 | RNVC: 2

22 Jul 1987

5120-12-092-2896

5120-12-041-7780

5120-12-146-8084
Hand Hammer

121468084
NM226-03: RNCC: 3 | RNVC: 2
NM226-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-366-5851
Spanner Wrench

123665851
311633: RNCC: 3 | RNVC: 2
0855-03-00-05/35: RNCC: 5 | RNVC: 2

11 May 2005

5120-12-193-6667
Werkzeugausstattung

121936667
71-71-139-003: RNCC: 3 | RNVC: 2

18 Aug 1982

5120-12-123-5594
Schluesseleinsatzsa

121235594
NO PRIMARY REF 12-123-5594: RNCC: 3 | RNVC: 2
107885: RNCC: 5 | RNVC: 9
157732: RNCC: 5 | RNVC: 9
4115-4-3: RNCC: 5 | RNVC: 9
4115-4A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-382-3784
Pliers

123823784
7904825: RNCC: 3 | RNVC: 2
8012610 TEIL7904825: RNCC: 5 | RNVC: 2

14 Jun 2010

5120-12-120-6213

5120-12-121-6886

5120-12-370-9175
Quick Adjusting Screw Clamp

123709175
TGN100T20: RNCC: 3 | RNVC: 2
00.20.49.12: RNCC: 5 | RNVC: 2

16 Jan 2007

5120-12-133-4358

5120-12-370-9843
Socket Wrench Set

123709843
4429865: RNCC: 3 | RNVC: 2

23 Jan 2007

5120-12-131-7161
Gegenstuetze

121317161
0005893533: RNCC: 3 | RNVC: 2
0005893533: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-385-3772
Hand Hydraulic Jack

123853772
9065800018: RNCC: 3 | RNVC: 2

30 May 2011

5120-12-196-2352
Face Spanner Wrench Socket

121962352
01TC32034: RNCC: 3 | RNVC: 2

15 Jun 1983

5120-12-181-5284
Torque Wrench Adapter

121815284
R809352: RNCC: 3 | RNVC: 2
809352: RNCC: 5 | RNVC: 2
RSBH27MM: RNCC: 5 | RNVC: 2
897240: RNCC: 5 | RNVC: 9
SBH27MM: RNCC: 5 | RNVC: 9
809352: RNCC: 5 | RNVC: 9

29 Nov 1979

5120-12-170-2613

5120-12-186-7325
Gewindeeinsatz

121867325
99346235: RNCC: 3 | RNVC: 2
420072: RNCC: 5 | RNVC: 9
420072: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-173-5111
Spanner Wrench

121735111
532008-58W3: RNCC: 3 | RNVC: 2
532008-58W3: RNCC: 5 | RNVC: 2
532008-58W3: RNCC: 5 | RNVC: 9
532008-58W3: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-12-192-7954
Plier Type Eyelet Punch

121927954
BEBA 20: RNCC: 3 | RNVC: 2
F991: RNCC: 5 | RNVC: 9

24 May 1982

5120-12-139-8569
Schiene

121398569
3125890331: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-139-5828

5120-12-183-9842
Screwdriver Bit

121839842
05073015001: RNCC: 3 | RNVC: 2
2210S-13X1,5: RNCC: 3 | RNVC: 9
2210S-13X1,5X55: RNCC: 5 | RNVC: 2
2210-13X1-5: RNCC: 5 | RNVC: 9
73015: RNCC: 5 | RNVC: 9

7 Jun 1980

5120-12-121-6477
Hammer Handle

121216477
NO PRIMARY REF 12-121-6477: RNCC: 3 | RNVC: 2
21-600-41-5-24: RNCC: 5 | RNVC: 9
600X38-5DIN5113: RNCC: 5 | RNVC: 9
DIN5113-600X38: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-8467
Screwdriver Bit

123058467
2096-0,8X5,5: RNCC: 3 | RNVC: 2
C 5715 122 PE: RNCC: 5 | RNVC: 2
C 5715 122 PE: RNCC: 5 | RNVC: 2
15JP-C5-5: RNCC: 5 | RNVC: 9

23 Dec 1985

5120-12-368-9597
Screwdriver Bit

123689597
52H-1B: RNCC: 3 | RNVC: 2
01.82.92.56: RNCC: 5 | RNVC: 2
1799328: RNCC: 5 | RNVC: 9

9 May 2006

5120-12-186-1945
Stuetzrohr

121861945
23305-264300.01.0: RNCC: 2 | RNVC: 2
23305-264300-01-0: RNCC: 3 | RNVC: 2
23305-264300-01-0: RNCC: 5 | RNVC: 9
23305-264300.01.0: RNCC: 5 | RNVC: 9

5 Dec 1980

5120-12-195-9342
Box Wrench

121959342
537152-0948.000: RNCC: 3 | RNVC: 2
53 71 52-0948: RNCC: 5 | RNVC: 9
537152-0948.000: RNCC: 5 | RNVC: 9

3 May 1983

5120-12-153-7187
Box Wrench

121537187
CH2294-2-1FE: RNCC: 3 | RNVC: 2
5615890003/00: RNCC: 5 | RNVC: 2
561589000300: RNCC: 5 | RNVC: 2
CH2294-2-1FE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-5957
Miner's Spoon

121205957
1375-019-5: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-354-0306
Torque Wrench Multiplier

123540306
000589786300: RNCC: 3 | RNVC: 2
000 589 78 63 00: RNCC: 5 | RNVC: 2

29 May 2001

5120-12-357-7264
Seal Inserter

123577264
9249494000: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-311-1921
Pliers

123111921
03 FLACHZANGE: RNCC: 3 | RNVC: 9

4 Aug 1987

5120-12-358-2715
Seal Remover

123582715
5X56000091: RNCC: 3 | RNVC: 2
131508: RNCC: 5 | RNVC: 2

7 Oct 2002

5120-12-351-9595

5120-12-380-5137
Electrical Contact Inserter And Remover

123805137
1876956008: RNCC: 3 | RNVC: 2

4 Nov 2009

5120-12-364-9575
Socket Wrench

123649575
T4840XESD35: RNCC: 3 | RNVC: 2

18 Nov 2004

5120-12-041-5749

5120-12-335-4441
Mechanical Puller

123354441
0852 0417: RNCC: 3 | RNVC: 2
8520417: RNCC: 5 | RNVC: 2

18 Aug 1994

5120-12-134-2758
Schluessel

121342758
023M07600: RNCC: 3 | RNVC: 2
VM69920: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-184-1770
Einpreszwerkzeug

121841770
F6141944: RNCC: 3 | RNVC: 2
F605331141944: RNCC: 5 | RNVC: 9

1 Jul 1980

5120-12-349-7293
Flat Tip Screwdriver

123497293
4724-2: RNCC: 3 | RNVC: 2
47241060: RNCC: 5 | RNVC: 2

4 Jan 2000

5120-12-178-0648
Bremsbel Auszieher

121780648
1966-2: RNCC: 3 | RNVC: 9
57362: RNCC: 5 | RNVC: 2
03.9314.6100.3/01: RNCC: 5 | RNVC: 9
5738720002: RNCC: 5 | RNVC: 9

16 Mar 1979

5120-12-362-4591
Combination Box And Open End Wrench

123624591
54.0084.960.46: RNCC: 3 | RNVC: 2
13-12: RNCC: 5 | RNVC: 2

26 Feb 2004

5120-12-336-5352
Socket Wrench Handle

123365352
KD5072-0002: RNCC: 3 | RNVC: 2
5072-0002: RNCC: 5 | RNVC: 2

23 Nov 1994

5120-12-123-5623
Socket Wrench

121235623
430-17X19: RNCC: 3 | RNVC: 2
000589160906: RNCC: 5 | RNVC: 2
1926110014: RNCC: 5 | RNVC: 2
213357: RNCC: 5 | RNVC: 9
27-17X19: RNCC: 5 | RNVC: 9
27-17X19: RNCC: 5 | RNVC: 9
70-17X19: RNCC: 5 | RNVC: 9
10750 17X19MM: RNCC: 5 | RNVC: 9
070070: RNCC: 5 | RNVC: 9
01360: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-145-6827
Antrieb Halbschale

121456827
NO PRIMARY REF 12-145-6827: RNCC: 3 | RNVC: 2
444-31-111-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-380-9807
Crimping Tool Die

123809807
76Z-0-4-51: RNCC: 3 | RNVC: 2
22544758: RNCC: 5 | RNVC: 2
76Z-0-4-51: RNCC: 5 | RNVC: 2
22544758: RNCC: 5 | RNVC: 2

17 Dec 2009

5120-12-345-4348
Mechanical Puller

123454348
80996060472: RNCC: 3 | RNVC: 2
80.99606-0438: RNCC: 5 | RNVC: 2
80.99606-0472: RNCC: 5 | RNVC: 2
80996060438: RNCC: 5 | RNVC: 2

13 Mar 1998

5120-12-358-3628
Ratchet Wrench

123583628
71425108: RNCC: 3 | RNVC: 2
52044-108: RNCC: 5 | RNVC: 2

14 Oct 2002

5120-12-333-5483
Op Montierwerkzeug

123335483
61-90-007: RNCC: 3 | RNVC: 2

5 Jan 1994

5120-12-144-6055
Spanner Wrench

121446055
900381: RNCC: 3 | RNVC: 2
V90038-1AND3: RNCC: 5 | RNVC: 2
2360-264216.00.0: RNCC: 5 | RNVC: 2
1X46900381: RNCC: 5 | RNVC: 2
2360-264216.00.0: RNCC: 5 | RNVC: 9
2360-264216-00-0: RNCC: 5 | RNVC: 9
2360-264216.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-180-1613
Screwdriver Bit

121801613
50-34-6: RNCC: 3 | RNVC: 2
3041 6: RNCC: 3 | RNVC: 2
54CV6: RNCC: 3 | RNVC: 2
991-6: RNCC: 3 | RNVC: 2
F30027753: RNCC: 5 | RNVC: 2
03090006: RNCC: 5 | RNVC: 2
698-422-0010: RNCC: 5 | RNVC: 2
5069613: RNCC: 5 | RNVC: 2
00050340283: RNCC: 5 | RNVC: 2
2487180009: RNCC: 5 | RNVC: 9

27 Aug 1979

5120-12-177-6263
Face Spanner Wrench Socket

121776263
UHG302-26: RNCC: 3 | RNVC: 2
UHG302-26: RNCC: 5 | RNVC: 9

9 Feb 1979

5120-12-376-5161
Socket Head Screw Key

123765161
43705: RNCC: 3 | RNVC: 2

10 Oct 2008

5120-12-331-7653
Mechanical Puller Attachment

123317653
80996280035: RNCC: 3 | RNVC: 2
528595: RNCC: 5 | RNVC: 2
80.99628.0035: RNCC: 5 | RNVC: 2

18 Jun 1993

5120-12-327-0991
Mechanical Puller Attachment

123270991
123589003400: RNCC: 3 | RNVC: 2

29 Nov 1991

5120-12-023-0355

5120-12-135-8335
Box Wrench

121358335
VW109: RNCC: 3 | RNVC: 2
VW109: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-357-7265
Seal Inserter

123577265
9249484000: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-164-6320
Einstell Schluessel

121646320
264-464: RNCC: 3 | RNVC: 2
264-464: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-343-3845
Montierdorn

123433845
427589104300: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-323-5410
Socket Wrench Adapter

123235410
01TC35316: RNCC: 3 | RNVC: 2

5 Dec 1990

5120-12-381-7385
Driftpin

123817385
225266: RNCC: 3 | RNVC: 2
RM 9200 T 006: RNCC: 5 | RNVC: 2

25 Mar 2010

5120-12-094-1281

5120-12-347-7953
Schraubendr Halter

123477953
538 125 40: RNCC: 3 | RNVC: 2
0011256300: RNCC: 3 | RNVC: 2
01.86.09.82: RNCC: 5 | RNVC: 2

10 Feb 1999

5120-12-152-1872
Gehaeus Geraetsatz

121521872
1X46112773: RNCC: 3 | RNVC: 2
V112773: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-382-1646
Inspecti Extension

123821646
JA 90 000 105: RNCC: 3 | RNVC: 2

18 May 2010

5120-12-381-0549
Stud Remover

123810549
904: RNCC: 3 | RNVC: 2
71340000: RNCC: 5 | RNVC: 2

6 Jan 2010

5120-12-362-5419
Inspection Mirror

123625419
54.0084.960.72: RNCC: 3 | RNVC: 2
5515M: RNCC: 5 | RNVC: 2

5 Mar 2004

5120-12-362-8630
Socket Wrench

123628630
61328605: RNCC: 3 | RNVC: 2

7 Apr 2004

5120-12-176-4478
Einziehvorrichtung

121764478
VW190: RNCC: 3 | RNVC: 2

27 Nov 1978

5120-12-134-8094

5120-12-350-9170
Dreh Haltewerkzeug

123509170
F6553666: RNCC: 3 | RNVC: 2
15006254: RNCC: 5 | RNVC: 2

5 Jun 2000

5120-12-380-5208
Socket Wrench Socket

123805208
1878256890: RNCC: 3 | RNVC: 2

5 Nov 2009

5120-12-355-4986
Dreh Haltewerkzeug

123554986
5584836: RNCC: 3 | RNVC: 2

20 Nov 2001

5120-12-023-2450

5120-12-023-0181

5120-12-345-6856
Pliers

123456856
RX7891: RNCC: 3 | RNVC: 2
0103225: RNCC: 5 | RNVC: 2

15 Apr 1998

5120-12-347-2764
Socket Wrench

123472764
27-30X33: RNCC: 3 | RNVC: 2

19 Nov 1998

5120-12-358-5230
Schraubendrehersatz

123585230
4891: RNCC: 3 | RNVC: 2
96489110: RNCC: 5 | RNVC: 2

23 Oct 2002

5120-12-023-0163

5120-12-333-0622
Socket Wrench

123330622
70.1101.505-60: RNCC: 3 | RNVC: 2

25 Oct 1993

5120-12-368-4021
Montierhuelse

123684021
311006: RNCC: 3 | RNVC: 2
0851-03-12-00/35: RNCC: 5 | RNVC: 2

7 Mar 2006

5120-12-123-5995
Socket Wrench Socket

121235995
47A7-16: RNCC: 3 | RNVC: 2
02440028: RNCC: 5 | RNVC: 2
7410DZ7-16: RNCC: 5 | RNVC: 9
109521: RNCC: 5 | RNVC: 9
176303: RNCC: 5 | RNVC: 9
A7410DZ-7/16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-196-8664
Ru Montierwerkzeug

121968664
4900059-751460.000.0: RNCC: 2 | RNVC: 2
4900059-751460.000.0: RNCC: 3 | RNVC: 2
4900059-751460.000.0: RNCC: 5 | RNVC: 2
4900059-751460-000-0: RNCC: 5 | RNVC: 2

29 Aug 1983

5120-12-120-6595
Socket Wrench Socket

121206595
771-LA1/2: RNCC: 3 | RNVC: 2
900A-1/2: RNCC: 3 | RNVC: 2
52A1-2: RNCC: 3 | RNVC: 2
50-6-1-2: RNCC: 3 | RNVC: 2
00.48.83.33: RNCC: 5 | RNVC: 2
043309: RNCC: 5 | RNVC: 2
03430032: RNCC: 5 | RNVC: 2
00506323: RNCC: 5 | RNVC: 2
109814: RNCC: 5 | RNVC: 9
7800SZ1-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-2362
Inserted Hammer Face

121332362
05000110001: RNCC: 3 | RNVC: 2
935 2: RNCC: 3 | RNVC: 2
100L GR. 2/27: RNCC: 5 | RNVC: 2
00110: RNCC: 5 | RNVC: 9
200L-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-152-7964
Mechanical Puller

121527964
1205 1880: RNCC: 3 | RNVC: 2
CH1989-10: RNCC: 3 | RNVC: 2
3.415.0.018.070.6: RNCC: 5 | RNVC: 2
12051880: RNCC: 5 | RNVC: 2
CH1989-10: RNCC: 5 | RNVC: 9
3-415-0-018-070-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-336-5207
Bearing And Bushing Remover

123365207
2-866-46584: RNCC: 3 | RNVC: 2

22 Nov 1994

5120-12-147-4334
Face Spanner Wrench Socket

121474334
1X46095106: RNCC: 3 | RNVC: 2
V95106: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-370-2165
Socket Head Screw Socket Wrench Attachment Wrench Set

123702165
770-KINMU: RNCC: 3 | RNVC: 2
00.51.03.59: RNCC: 5 | RNVC: 2

5 Oct 2006

5120-12-329-2483
Torque Wrench Adapter

123292483
000589109916: RNCC: 3 | RNVC: 2

28 Jul 1992

5120-12-306-0234
Manual Impact Wrench

123060234
K1900: RNCC: 3 | RNVC: 2
665444: RNCC: 5 | RNVC: 2

21 Jan 1986

5120-12-192-9236
Socket Wrench Socket

121929236
123589000800: RNCC: 3 | RNVC: 2

7 Jun 1982

5120-12-023-1399

5120-12-135-6555
Sicherungs- Stift

121356555
351: RNCC: 3 | RNVC: 2
8836: RNCC: 3 | RNVC: 9
000351: RNCC: 5 | RNVC: 2
900: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-362-0945
Socket Wrench

123620945
65.7132.050.01-A002: RNCC: 3 | RNVC: 2

8 Jan 2004

5120-12-129-7477
Open End Wrench

121297477
AWENTW2544A1: RNCC: 3 | RNVC: 2
AWENTW2544A1: RNCC: 5 | RNVC: 2
AWENTW2544A1: RNCC: 5 | RNVC: 2
AWENTW2544A1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-307-2658
Montierhuelse

123072658
4900238-5400: RNCC: 2 | RNVC: 2
279.991122: RNCC: 3 | RNVC: 2
279.991122: RNCC: 5 | RNVC: 9
279.991122: RNCC: 5 | RNVC: 9

28 May 1986

5120-12-332-9758
Seal Inserter

123329758
9136416: RNCC: 3 | RNVC: 2

18 Oct 1993

5120-12-333-5736
Eindrueckwerkzeug

123335736
425589004300: RNCC: 3 | RNVC: 2
425 589 00 43 00: RNCC: 5 | RNVC: 2
425589004300: RNCC: 5 | RNVC: 9

6 Jan 1994

5120-12-307-3519
Screwdriver And Wrench Assembly

123073519
11078903400: RNCC: 3 | RNVC: 2

6 Jun 1986

5120-12-372-1980
Montiereise Schutz

123721980
5198041: RNCC: 3 | RNVC: 2

26 Jun 2007

5120-12-369-4706
Flat Tip Screwdriver

123694706
66010: RNCC: 3 | RNVC: 2
01.71.90.21: RNCC: 5 | RNVC: 2

7 Jul 2006

5120-12-390-4030
Bearing And Bushing Remover

123904030
F30376048: RNCC: 3 | RNVC: 2

8 Nov 2012

5120-12-375-7295
Hand Terminal Crimping Tool

123757295
0015386930: RNCC: 3 | RNVC: 2

30 Jun 2008

5120-12-021-2684

5120-12-364-1950
Schluesseleinsatz

123641950
F6557994: RNCC: 3 | RNVC: 2

31 Aug 2004

5120-12-374-4002
Pliers

123744002
65355280-TCS: RNCC: 3 | RNVC: 2

13 Feb 2008

5120-12-332-9809
Bearing And Bushing Inserter

123329809
321589071500: RNCC: 3 | RNVC: 2

18 Oct 1993

5120-12-158-9753
Electronic Equipment Alignment Tool

121589753
770C: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-024-4800

5120-12-370-9135
Quick Adjusting Screw Clamp

123709135
G50H: RNCC: 3 | RNVC: 2
00.20.73.36: RNCC: 5 | RNVC: 2

16 Jan 2007

5120-12-091-9884

5120-12-329-1322
Electrical Contact Inserter And Remover

123291322
51024: RNCC: 3 | RNVC: 2

21 Jul 1992

5120-12-182-4192
Druckstueck

121824192
VW433: RNCC: 3 | RNVC: 9

30 Jan 1980

5120-12-126-0237
Feuerloeschhaken

121260237
1919: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-159-9975
Verteiler Hebezange

121599975
0003-3350-170: RNCC: 3 | RNVC: 2
0003-3350-170: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-159-8348
Sicherungszieher

121598348
5801369-1101-013: RNCC: 2 | RNVC: 2
2404624020: RNCC: 5 | RNVC: 2
5801369-1101-013: RNCC: 5 | RNVC: 2
24046 24020: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-384-2295
Piston Ring Compressor

123842295
80996130039: RNCC: 3 | RNVC: 2
80.99613-0039: RNCC: 5 | RNVC: 2

3 Feb 2011

5120-12-333-8777
Multiposition Vise

123338777
TL5120-0123-B: RNCC: 2 | RNVC: 2
9-205: RNCC: 3 | RNVC: 2
51056-045: RNCC: 5 | RNVC: 2
51056045: RNCC: 5 | RNVC: 2

21 Feb 1994

5120-12-371-4200
Ausdrueckwerkzeug

123714200
4.901-089.0: RNCC: 3 | RNVC: 2

27 Mar 2007

5120-12-153-7296
Electronic Equipment Alignment Tool

121537296
1-M 380-1: RNCC: 3 | RNVC: 2
5551: RNCC: 3 | RNVC: 2
137847: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-374-3580
Socket Wrench Socket

123743580
03010012-TCS: RNCC: 3 | RNVC: 2

11 Feb 2008

5120-12-368-7914
Socket Wrench Screwdriver Attachment

123687914
3525-PZ1: RNCC: 3 | RNVC: 2
00.47.45.89: RNCC: 5 | RNVC: 2

20 Apr 2006

5120-12-020-7820

5120-12-364-6305
Socket Wrench Crowfoot Attachment

123646305
02190026-TCS: RNCC: 3 | RNVC: 2

15 Oct 2004

5120-12-196-2348
Socket Wrench Socket

121962348
01TC32315: RNCC: 3 | RNVC: 2

15 Jun 1983

5120-12-127-4811

5120-12-311-2408
Fixed Open End Wrench Set

123112408
100-6M: RNCC: 3 | RNVC: 2

7 Aug 1987

5120-12-196-7387
Retaining Ring Installation Tool

121967387
1X56134496: RNCC: 3 | RNVC: 2
0535797: RNCC: 5 | RNVC: 2
535797: RNCC: 5 | RNVC: 9

9 Aug 1983

5120-12-135-2972

5120-12-187-6691
Screw Thread Insert Tang Breakoff Tool

121876691
01585070000: RNCC: 3 | RNVC: 2

27 Apr 1981

5120-12-336-5870
Montierhuelse

123365870
0852 5023: RNCC: 3 | RNVC: 2
8525023: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-337-1485
Montierdorn

123371485
8523068.001: RNCC: 3 | RNVC: 2
0852 3068.001: RNCC: 5 | RNVC: 2

25 Jan 1995

5120-12-127-3940

5120-12-123-5558

5120-12-129-7407

5120-12-371-1830
Socket Wrench

123711830
49904: RNCC: 3 | RNVC: 2

26 Feb 2007

5120-12-370-6266
Trowel

123706266
703 200 00: RNCC: 3 | RNVC: 2
02.33.40.60: RNCC: 5 | RNVC: 2

1 Dec 2006

5120-12-328-6475
Valve Tappet Adjusting Tool

123286475
KDEP1534: RNCC: 3 | RNVC: 2
F600000376587: RNCC: 5 | RNVC: 2
F6376587: RNCC: 5 | RNVC: 2

11 Jun 1992

5120-12-373-2976
Socket Wrench

123732976
606589010900: RNCC: 3 | RNVC: 2

18 Oct 2007

5120-12-174-1766
Pliers

121741766
DIN5244-140: RNCC: 4 | RNVC: 1
106599: RNCC: 5 | RNVC: 9
2665B140: RNCC: 5 | RNVC: 9
140DIN5244: RNCC: 5 | RNVC: 9

9 Jun 1978

5120-12-041-2746

5120-12-347-9729
Spanner Wrench

123479729
LL-98BA0002: RNCC: 3 | RNVC: 2

18 Mar 1999

5120-12-351-3138
Socket Wrench Set

123513138
40/23/7: RNCC: 3 | RNVC: 2
630360-W: RNCC: 5 | RNVC: 2
63036W: RNCC: 5 | RNVC: 2
96010134: RNCC: 5 | RNVC: 2

12 Jul 2000

5120-12-328-6287
Spanner Wrench

123286287
F30375636: RNCC: 3 | RNVC: 2

10 Jun 1992

5120-12-314-1732
Ausdrueckwerkzeug

123141732
0852 8764: RNCC: 3 | RNVC: 2
8528764: RNCC: 5 | RNVC: 2

15 Jun 1988

5120-12-311-8231
Lager- Un Aufnahme

123118231
KDEP1544: RNCC: 3 | RNVC: 2
KDEP1544: RNCC: 5 | RNVC: 2

20 Oct 1987

5120-12-364-5646
Open End Wrench

123645646
40061010-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-126-4923

5120-12-354-0311
Montierdorn

123540311
950589001500: RNCC: 3 | RNVC: 2

29 May 2001

5120-12-168-6337
Spanner Wrench

121686337
7021078101901: RNCC: 3 | RNVC: 2

25 Mar 1977

5120-12-376-6428
Swivel Knob Jeweler's Screwdriver

123766428
T4880XES08: RNCC: 3 | RNVC: 2

23 Oct 2008

5120-12-365-1559
Hand Beading Tool

123651559
2.6033: RNCC: 3 | RNVC: 2

2 Dec 2004

5120-12-194-0454
Torque Wrench Adapter

121940454
TL5120-0086-940: RNCC: 2 | RNVC: 2
6414: RNCC: 3 | RNVC: 2
734/20: RNCC: 3 | RNVC: 2
6264410001: RNCC: 5 | RNVC: 2
58240020: RNCC: 5 | RNVC: 2
52287520: RNCC: 5 | RNVC: 9
7852-3: RNCC: 5 | RNVC: 9
28/DCA-1/2: RNCC: 5 | RNVC: 9
52542015: RNCC: 5 | RNVC: 9
734-20: RNCC: 5 | RNVC: 9

27 Sep 1982

5120-12-156-8357
Shovel Handle

121568357
DIN20152-850-AE-ES: RNCC: 2 | RNVC: 2
DIN20152-AE850ESCHE: RNCC: 5 | RNVC: 9
AE-850DIN20152-ES: RNCC: 5 | RNVC: 9
AE850DIN20152ESCHE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-345-4793
Socket Wrench Set

123454793
7819HNRE: RNCC: 3 | RNVC: 2
58576/610: RNCC: 5 | RNVC: 2
1837938: RNCC: 5 | RNVC: 2
58576610: RNCC: 5 | RNVC: 2
54.0084.989.19: RNCC: 5 | RNVC: 2
5300.780.011.000: RNCC: 5 | RNVC: 2

23 Mar 1998

5120-12-195-6840
Combination Box And Open End Wrench

121956840
NO PRIMARY REF 12-195-6840: RNCC: 3 | RNVC: 2
1952E-11/16: RNCC: 5 | RNVC: 9

28 Mar 1983

5120-12-361-1200
Wrench Extension Handle

123611200
CBD32568P01: RNCC: 3 | RNVC: 2

26 Aug 2003

5120-12-386-8869
M Indentation Tool

123868869
0.411.0352: RNCC: 3 | RNVC: 2
0.411.0352: RNCC: 5 | RNVC: 2

12 Oct 2011

5120-12-364-5628
Open End Wrench

123645628
40032730-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-094-1222

5120-12-195-7378
Socket Wrench

121957378
114: RNCC: 3 | RNVC: 2
2514: RNCC: 5 | RNVC: 9

6 Apr 1983

5120-12-140-9864
Dorn

121409864
5122: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-332-6250
Aligning Punch Set

123326250
532113-9011.985: RNCC: 3 | RNVC: 2
532113-9011.985: RNCC: 5 | RNVC: 9

31 Aug 1993

5120-12-389-5142
Torque Wrench Adapter

123895142
R819041: RNCC: 3 | RNVC: 2

17 Jul 2012

5120-12-387-7116
Bearing And Bushing Inserter

123877116
F6782970: RNCC: 3 | RNVC: 2

26 Jan 2012

5120-12-159-5784
Box Wrench

121595784
1205890003: RNCC: 3 | RNVC: 2
120589000300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-171-2459
Abziehvorrichtung

121712459
1X56134512: RNCC: 3 | RNVC: 2

21 Sep 1977

5120-12-323-1192
Torque Wrench Adapter

123231192
4988020: RNCC: 3 | RNVC: 2

24 Oct 1990

5120-12-183-9684
Socket Wrench Socket

121839684
DIN3124-12X6,3: RNCC: 2 | RNVC: 2
A6700DM-12: RNCC: 5 | RNVC: 2
91619062: RNCC: 5 | RNVC: 2
230/741/0: RNCC: 5 | RNVC: 2
6700DM12: RNCC: 5 | RNVC: 9

7 Jun 1980

5120-12-130-7898
Socket Wrench Handle

121307898
780-1: RNCC: 3 | RNVC: 2
9550: RNCC: 3 | RNVC: 2
883: RNCC: 3 | RNVC: 2
00.52.50.12: RNCC: 5 | RNVC: 2
110739: RNCC: 5 | RNVC: 2
96161117: RNCC: 5 | RNVC: 2
6-085-215-0883-0: RNCC: 5 | RNVC: 9
6.085.215.0883.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-161-9718
Craftsman's Tweezers

121619718
3416-145-R: RNCC: 3 | RNVC: 2
5572: RNCC: 3 | RNVC: 2
147303: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-190-3348
Abziehvorrichtung

121903348
1413570: RNCC: 3 | RNVC: 2
1413570-1: RNCC: 5 | RNVC: 9
1413570/1: RNCC: 5 | RNVC: 9

23 Nov 1981

5120-12-341-6564
Socket Head Screw Key

123416564
410-140-58: RNCC: 3 | RNVC: 2
05022080001: RNCC: 3 | RNVC: 2
10767A-1/4: RNCC: 3 | RNVC: 2
00.42.24.53: RNCC: 5 | RNVC: 2
950PKL-1/4: RNCC: 5 | RNVC: 2
43570016: RNCC: 5 | RNVC: 2
022080: RNCC: 5 | RNVC: 9

11 Oct 1996

5120-12-176-1324
Adjustable Wrench

121761324
NO PRIMARY REF 12-176-1324: RNCC: 3 | RNVC: 2
148377: RNCC: 5 | RNVC: 9
C1058-1-2-200: RNCC: 5 | RNVC: 9
C1058-1-2-200MM: RNCC: 6 | RNVC: 9

9 Nov 1978

5120-12-180-6118
Schlagstueck

121806118
P-895189-001: RNCC: 3 | RNVC: 2
P895189-001: RNCC: 5 | RNVC: 2

21 Sep 1979

5120-12-171-3448
Combination Box And Open End Wrench Set

121713448
NO PRIMARY REF 12-171-3448: RNCC: 3 | RNVC: 2
4020LM3T05-5: RNCC: 5 | RNVC: 9

30 Sep 1977

5120-12-338-2535
Mechanical Puller

123382535
66-92-016-2: RNCC: 3 | RNVC: 2

12 Jun 1995

5120-12-194-7262
Eindrueckwerkzeugsa

121947262
0110D100505/1: RNCC: 3 | RNVC: 2
0110D100505-1: RNCC: 5 | RNVC: 2

30 Nov 1982

5120-12-092-2256

5120-12-330-3169
Zentrier- Ring

123303169
2653-990090.03: RNCC: 2 | RNVC: 2
2653-990090.03: RNCC: 3 | RNVC: 2

2 Dec 1992

5120-12-327-4526
Electrical Contact Inserter

123274526
725831: RNCC: 3 | RNVC: 2

23 Jan 1992

5120-12-126-5421
Mechanical Puller

121265421
4015890133: RNCC: 3 | RNVC: 2
4015890133: RNCC: 3 | RNVC: 9
401589013300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-145-9301
Schluessel

121459301
6129493: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-351-9591

5120-12-041-8727

5120-12-156-1531
Drive Pin Punch

121561531
NM350-14: RNCC: 3 | RNVC: 2
NM350-14: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-357-5775
Hand Hydraulic Jack

123575775
0015833815: RNCC: 3 | RNVC: 2
A0015833815: RNCC: 5 | RNVC: 9

3 Jul 2002

5120-12-374-9426
Craftsman's Tweezers

123749426
7-SA-E: RNCC: 3 | RNVC: 2

9 Apr 2008

5120-12-145-6829

5120-12-312-7993
Lager- Und Einsatz

123127993
1X56115487: RNCC: 3 | RNVC: 2
1X56 115 487: RNCC: 5 | RNVC: 2
V115487: RNCC: 5 | RNVC: 2

5 Feb 1988

5120-12-307-5355
Spanner Wrench

123075355
410120: RNCC: 3 | RNVC: 2

27 Jun 1986

5120-12-129-3436
Gelenkhebel- Heber

121293436
111011031A: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-350-8473
Machinist's Vise

123508473
10803: RNCC: 3 | RNVC: 2
00.10.02.32: RNCC: 5 | RNVC: 2
10803: RNCC: 5 | RNVC: 9

29 May 2000

5120-12-177-3669
Preszplatte

121773669
55061030: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-304-3888
Lifting Pneumatic Bag

123043888
121 04 000: RNCC: 3 | RNVC: 2
263601: RNCC: 5 | RNVC: 9

11 Jul 1985

5120-12-157-6776
Kabelschuhh Matrize

121576776
B150WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-130-6797
Open End Wrench

121306797
LG40990: RNCC: 3 | RNVC: 2
WZ27: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-341-6225
Crimping Tool Die

123416225
VG95236T11AB002: RNCC: 2 | RNVC: 2
MRP0855: RNCC: 3 | RNVC: 9
MRP0855: RNCC: 5 | RNVC: 2

3 Oct 1996

5120-12-129-1385

5120-12-393-7598
Spanner Wrench

123937598
10179846: RNCC: 3 | RNVC: 2

9 Oct 2013

5120-12-344-6434
Dreh Haltewerkzeug

123446434
99360351: RNCC: 3 | RNVC: 2

19 Nov 1997

5120-12-360-8745
Mechanical Puller Attachment

123608745
0853 9389.001: RNCC: 3 | RNVC: 2

18 Jul 2003

5120-12-353-8484
Socket Wrench

123538484
001589480900: RNCC: 3 | RNVC: 2
001589480900: RNCC: 5 | RNVC: 2
001589480900: RNCC: 5 | RNVC: 2

15 May 2001

5120-12-353-8481
Socket Wrench

123538481
001589450900: RNCC: 3 | RNVC: 2
001589450900: RNCC: 5 | RNVC: 2
001589450900: RNCC: 5 | RNVC: 2

15 May 2001

5120-12-199-2104

5120-12-336-7127
Open End Wrench

123367127
423-251000.002: RNCC: 2 | RNVC: 2
9869278: RNCC: 3 | RNVC: 2
423-251000.002: RNCC: 5 | RNVC: 9
9869278: RNCC: 5 | RNVC: 9

13 Dec 1994

5120-12-132-4288
Socket Wrench

121324288
6-0864-20-1-0650: RNCC: 3 | RNVC: 9
6.086.420.1065.0: RNCC: 3 | RNVC: 9
6.0864.20.1.0650: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-357-6149
Torque Wrench

123576149
IZO-I-200: RNCC: 3 | RNVC: 2
1839666: RNCC: 5 | RNVC: 2
M4201914: RNCC: 5 | RNVC: 2
IZO-1-200: RNCC: 5 | RNVC: 9

8 Jul 2002

5120-12-130-7894
Screwdriver Bit

121307894
NO PRIMARY REF 12-130-7894: RNCC: 3 | RNVC: 2
75Z1-4: RNCC: 5 | RNVC: 9
75Z1/4: RNCC: 5 | RNVC: 9
7090Z1-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-4155
Pliers

123124155
71921-120: RNCC: 3 | RNVC: 2
E3174-P-DF: RNCC: 3 | RNVC: 2
727120-135: RNCC: 3 | RNVC: 2
250A-09-0902: RNCC: 5 | RNVC: 2
250A-09-0902: RNCC: 5 | RNVC: 9
71921-120: RNCC: 5 | RNVC: 9

30 Dec 1987

5120-12-150-2731
Mechanical Puller

121502731
23176-264350-00-0: RNCC: 2 | RNVC: 2
23176-264350.00.0: RNCC: 2 | RNVC: 2
23176-264350-00-0: RNCC: 5 | RNVC: 2
23176-264350-00-0: RNCC: 5 | RNVC: 2
23176-264350.00.0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-336-9856
Electrical Contact Inserter And Remover

123369856
VG95236T04A0002: RNCC: 2 | RNVC: 2
46736: RNCC: 3 | RNVC: 2
VG95236T04A003: RNCC: 5 | RNVC: 9

5 Jan 1995

5120-12-363-8429
Bearing And Bushing Inserter

123638429
T671P5001256: RNCC: 3 | RNVC: 2

30 Jul 2004

5120-12-335-0658
Seal Inserter

123350658
F30370269: RNCC: 3 | RNVC: 2

19 Jul 1994

5120-12-126-5422
Einpreszwerkzeug

121265422
4015890031: RNCC: 3 | RNVC: 2
4015890031: RNCC: 3 | RNVC: 9
401589003100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5525
Socket Wrench

121235525
DIN 659 SW 12: RNCC: 3 | RNVC: 2
DIN659SW12: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-166-2583

5120-12-357-7543
Ru Montierwerkzeug

123577543
RD99-00-015000: RNCC: 3 | RNVC: 2

19 Jul 2002

5120-12-360-7775
Fuse Puller

123607775
2200102: RNCC: 3 | RNVC: 2

8 Jul 2003

5120-12-369-3770
Screwdriver Bit Set

123693770
59TORX/1: RNCC: 3 | RNVC: 2
01.86.04.77: RNCC: 5 | RNVC: 2
7314151812607: RNCC: 5 | RNVC: 2

27 Jun 2006

5120-12-324-5212
Seal Inserter

123245212
601589031400: RNCC: 3 | RNVC: 2

26 Feb 1991

5120-12-336-6131
Socket Head Screw Key

123366131
334-6,0X350: RNCC: 3 | RNVC: 2

30 Nov 1994

5120-12-123-5560
Spanner Wrench

121235560
12910-1: RNCC: 3 | RNVC: 2
107865: RNCC: 5 | RNVC: 9
4106: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-139-3105

5120-12-130-3367

5120-12-307-8531
Hand Rivet Set

123078531
100418-0803.02: RNCC: 2 | RNVC: 2

1 Aug 1986

5120-12-382-7400
Screwdriver Bit

123827400
05060187001: RNCC: 3 | RNVC: 2
867/4ZTX15X89: RNCC: 5 | RNVC: 2

3 Aug 2010

5120-12-194-0834
Torque Wrench Adapter

121940834
TL5120-0086-650: RNCC: 2 | RNVC: 2
7852-8 14: RNCC: 5 | RNVC: 9
21/DCA-14: RNCC: 5 | RNVC: 9
6264110012: RNCC: 5 | RNVC: 9
6630D-14: RNCC: 5 | RNVC: 9
732/40 14: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-092-2287

5120-12-345-6483
Screwdriver Bit Set

123456483
INX19PM: RNCC: 3 | RNVC: 2

7 Apr 1998

5120-12-186-7344
Zugstueck

121867344
99346004: RNCC: 3 | RNVC: 2
410333: RNCC: 5 | RNVC: 9
410333: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-173-5114
Okular Zange

121735114
532008G16W6-1: RNCC: 3 | RNVC: 2
532008G16W6-1: RNCC: 5 | RNVC: 2
532008G16W6-1: RNCC: 5 | RNVC: 9
532008G16W6-1: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-12-177-3636
Ausdruecker

121773636
713A095-75: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-337-0218
Socket Head Screw Key

123370218
141098: RNCC: 3 | RNVC: 2
362TR T10X80: RNCC: 3 | RNVC: 2
TX10S: RNCC: 5 | RNVC: 2
01300: RNCC: 5 | RNVC: 2
141098.: RNCC: 5 | RNVC: 9

11 Jan 1995

5120-12-364-3445
Socket Wrench Attachment Universal Joint

123643445
11021000-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-320-4837
Spanner Wrench

123204837
23190027: RNCC: 3 | RNVC: 9

18 Jan 1990

5120-12-044-5038

5120-12-149-6895

5120-12-369-0335
Box Wrench

123690335
TL5120-0074-175: RNCC: 2 | RNVC: 2
DIN838-21X24: RNCC: 5 | RNVC: 1

16 May 2006

5120-12-365-5393
Socket Wrench Screwdriver Attachment

123655393
01050005-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-309-4967
Spanner Wrench

123094967
7226297: RNCC: 3 | RNVC: 2

28 Jan 1987

5120-12-390-4268
Mechanical Puller Attachment

123904268
F6375394: RNCC: 3 | RNVC: 2

12 Nov 2012

5120-12-384-6990
Mechanical Puller

123846990
I005310: RNCC: 3 | RNVC: 2

21 Mar 2011

5120-12-328-4581
Rack Bar Jack

123284581
1350.10.20.33: RNCC: 3 | RNVC: 2

21 May 1992

5120-12-331-6648
Drift Punch

123316648
005 500: RNCC: 3 | RNVC: 2

4 Jun 1993

5120-12-385-2592
Hand-Operated Grommet And Eyelet Press

123852592
50.000.048: RNCC: 3 | RNVC: 2

13 May 2011

5120-12-151-6571
Geh Nietvorrichtung

121516571
2B2001U1V8: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-377-3290
Ge Montierwerkzeug

123773290
F6559691: RNCC: 3 | RNVC: 2

9 Jan 2009

5120-12-306-5932
Spanner Wrench

123065932
009-078.120-000 W6: RNCC: 3 | RNVC: 2

13 Mar 1986

5120-12-126-2971
Adjustable Wrench

121262971
NO PRIMARY REF 12-126-2971: RNCC: 3 | RNVC: 2
2142-15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-185-3869
Socket Wrench

121853869
23290-268152: RNCC: 3 | RNVC: 2
23290-268152: RNCC: 5 | RNVC: 2

3 Oct 1980

5120-12-369-1853
Plier Wrench

123691853
4124225: RNCC: 3 | RNVC: 2
00.13.50.89: RNCC: 5 | RNVC: 2

1 Jun 2006

5120-12-331-6060
Seal Inserter And Remover

123316060
80996066011: RNCC: 3 | RNVC: 2
80.99606.6011: RNCC: 5 | RNVC: 2
V1090: RNCC: 5 | RNVC: 2

27 May 1993

5120-12-389-2684
Spanner Wrench

123892684
601589030700: RNCC: 3 | RNVC: 2
601589030700: RNCC: 5 | RNVC: 2

14 Jun 2012

5120-12-139-5785

5120-12-330-9882
Seal Inserter

123309882
VW 2003/1: RNCC: 3 | RNVC: 2
2003/1: RNCC: 3 | RNVC: 2

8 Mar 1993

5120-12-154-1031
Anlaszve Auszieher

121541031
CH2267-8: RNCC: 3 | RNVC: 2
839589263300: RNCC: 5 | RNVC: 2
CH2267-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-320-5434
Socket Head Screw Key

123205434
368-7/64: RNCC: 3 | RNVC: 2

24 Jan 1990

5120-12-384-9327
Aufweitwer Einsatz

123849327
1.1022: RNCC: 3 | RNVC: 2

12 Apr 2011

5120-12-368-7234
Socket Wrench Socket

123687234
771-L 7: RNCC: 3 | RNVC: 2
00.48.51.01: RNCC: 5 | RNVC: 2

10 Apr 2006

5120-12-328-3534
Socket Wrench Socket

123283534
F30374242: RNCC: 3 | RNVC: 2
F3 0374242: RNCC: 5 | RNVC: 2

8 May 1992

5120-12-345-4433
Mechanical Puller

123454433
48: RNCC: 3 | RNVC: 2

16 Mar 1998

5120-12-025-4457

5120-12-041-6000

5120-12-123-5139
Open End Wrench

121235139
DIN894-6: RNCC: 2 | RNVC: 2
894-6: RNCC: 3 | RNVC: 2
TVA5120-2-263-025.1.1.1: RNCC: 5 | RNVC: 2
6DIN894: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-194-0809
Torque Wrench Adapter

121940809
TL5120-0086-210: RNCC: 2 | RNVC: 2
731/40 13: RNCC: 5 | RNVC: 9
7852-7 13: RNCC: 5 | RNVC: 9
20/DCA-13: RNCC: 5 | RNVC: 9
6264110001: RNCC: 5 | RNVC: 9
6450D-13: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-380-2705
Flat Tip Screwdriver

123802705
664300-3X60: RNCC: 3 | RNVC: 2
392322320901: RNCC: 6 | RNVC: 9

13 Oct 2009

5120-12-132-4297
Ausbauvorrichtung

121324297
6-420-0-650-005-6: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-366-8568
Socket Wrench

123668568
123-3/8X7/16: RNCC: 3 | RNVC: 2
29A3-8X7-16: RNCC: 3 | RNVC: 2
00.32.10.09: RNCC: 5 | RNVC: 2

15 Jun 2005

5120-12-145-8055
We Montierwerkzeug

121458055
FG348817: RNCC: 3 | RNVC: 2
8385890061: RNCC: 5 | RNVC: 2
838589006100: RNCC: 5 | RNVC: 2
F605001248817: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-364-5631
Combination Box And Open End Wrench

123645631
40082020-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-173-5144
Spanner Wrench

121735144
009-017.620-000W3: RNCC: 3 | RNVC: 2
009-017-620-000W3: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-12-338-6629
Torque Wrench

123386629
730R/20: RNCC: 3 | RNVC: 2
96502020: RNCC: 5 | RNVC: 2

10 Aug 1995

5120-12-311-8026
Socket Head Screw Key

123118026
720.18-00-00-00-000: RNCC: 3 | RNVC: 2

19 Oct 1987

5120-12-358-4164
Plier Wrench

123584164
7140908: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-12-022-7268

5120-12-312-3071
Mechanical Puller

123123071
80.99602.0102: RNCC: 3 | RNVC: 2
80.99602.0102: RNCC: 5 | RNVC: 2
80996020102: RNCC: 5 | RNVC: 2

15 Dec 1987

5120-12-367-5886
Duese Reiniger

123675886
10135: RNCC: 3 | RNVC: 2

7 Sep 2005

5120-12-342-0302
Seal Inserter

123420302
231650: RNCC: 3 | RNVC: 2
231650: RNCC: 5 | RNVC: 2
0231650: RNCC: 5 | RNVC: 9

3 Dec 1996

5120-12-129-1858
Pipe Vise

121291858
61-3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-308-5536
Bearing And Bushing Inserter

123085536
99346047: RNCC: 3 | RNVC: 2
416900: RNCC: 5 | RNVC: 9
416900: RNCC: 5 | RNVC: 9

22 Oct 1986

5120-12-331-6685
Kol Ausbauwerkzeug

123316685
1000173-992010.000.0: RNCC: 2 | RNVC: 2
1000173-992010.000.0: RNCC: 3 | RNVC: 2

7 Jun 1993

5120-12-368-7086
Socket Wrench Screwdriver Attachment

123687086
3500-IS1,0: RNCC: 3 | RNVC: 2
00.47.38.82: RNCC: 5 | RNVC: 2

7 Apr 2006

5120-12-368-7180
Socket Wrench Socket

123687180
870-A7/8: RNCC: 3 | RNVC: 2
1819927: RNCC: 3 | RNVC: 2
00.45.87.28: RNCC: 5 | RNVC: 2

10 Apr 2006

5120-12-372-2277
Hand Tube Swaging Tool Kit

123722277
138223-001: RNCC: 3 | RNVC: 2

28 Jun 2007

5120-12-343-0200
Inserted Hammer Face

123430200
E267-35: RNCC: 3 | RNVC: 2
566071: RNCC: 5 | RNVC: 2

23 Apr 1997

5120-12-306-0073
Drain Plug Wrench

123060073
NO PRIMARY REF 12-306-0073: RNCC: 3 | RNVC: 2
5719640005: RNCC: 5 | RNVC: 9
3830: RNCC: 5 | RNVC: 9

20 Jan 1986

5120-12-120-0720
Digging Pick

121200720
DIN20110-3,5: RNCC: 4 | RNVC: 1
DIN20110-3,5 MIT STIEL: RNCC: 5 | RNVC: 2
3,5DIN20110: RNCC: 5 | RNVC: 9
3-5DIN20110: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-4346
Nullwel Gegenlager

121474346
23114-7179.00: RNCC: 3 | RNVC: 2
23114-7179-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-7314
Schraube

121767314
VG95211-ML-121767314: RNCC: 2 | RNVC: 2
105-21832W1.02: RNCC: 3 | RNVC: 2
105-21832W1-02: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-327-8467
Fixed Open End Wrench Set

123278467
1931Z/14T: RNCC: 3 | RNVC: 2
160709: RNCC: 5 | RNVC: 2

12 Mar 1992

5120-12-356-0435
Combination Box And Open End Wrench

123560435
400-2.7/16: RNCC: 3 | RNVC: 2
00400635980: RNCC: 5 | RNVC: 2

15 Jan 2002

5120-12-185-5939
Spanner Wrench

121855939
V7060-023-821-3: RNCC: 3 | RNVC: 2

16 Oct 1980

5120-12-146-2668
Laufp Montierhebel

121462668
23114-7011-03: RNCC: 2 | RNVC: 2
7-240-1302-00: RNCC: 3 | RNVC: 2
23114-7011-03: RNCC: 5 | RNVC: 2
23114-7011-03: RNCC: 5 | RNVC: 9
23114-7011-03: RNCC: 5 | RNVC: 9
23114-7011-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-301-5260
Torque Wrench

123015260
DSG-00/2: RNCC: 3 | RNVC: 2
DSG00-2: RNCC: 5 | RNVC: 2
0224259D00: RNCC: 5 | RNVC: 2

20 Oct 1984

5120-12-137-7711
Grommet Inserting Punch And Die

121377711
317504: RNCC: 3 | RNVC: 2
3630038: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-385-1561
Flat Tip Screwdriver

123851561
952653: RNCC: 3 | RNVC: 2

5 May 2011

5120-12-313-0577
Bearing And Bushing Inserter And Remover

123130577
KDEP 2860: RNCC: 3 | RNVC: 2

1 Mar 1988

5120-12-364-2916
Cross Tip Screwdriver

123642916
48301001-TCS: RNCC: 3 | RNVC: 2

8 Sep 2004

5120-12-020-4888

5120-12-390-4385
Installation And Re

123904385
F6788597: RNCC: 3 | RNVC: 2

13 Nov 2012

5120-12-024-3314

5120-12-184-4745
Face Spanner Wrench Socket

121844745
1410101A11A161022007: RNCC: 3 | RNVC: 2

29 Jul 1980

5120-12-186-7331
Einsatz

121867331
99366622: RNCC: 3 | RNVC: 2
420083: RNCC: 5 | RNVC: 9
420083: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-311-6961
Seal Inserter

123116961
KDEP1584: RNCC: 3 | RNVC: 2
KDEP1584: RNCC: 5 | RNVC: 2

7 Oct 1987

5120-12-364-3467
Combination Box And Open End Wrench

123643467
40080909-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-177-3659
Torque Wrench

121773659
0276170000: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-372-8014
Trowel

123728014
748 010 00: RNCC: 3 | RNVC: 2
02.33.56.76: RNCC: 5 | RNVC: 2

23 Aug 2007

5120-12-375-7299
Plug Electrical Connector Extractor

123757299
0025382330: RNCC: 3 | RNVC: 2

30 Jun 2008

5120-12-319-3401
Mechanical Puller

123193401
99347053: RNCC: 3 | RNVC: 2

25 Sep 1989

5120-12-390-7523
Socket Head Screw Key

123907523
43150008-TCS: RNCC: 3 | RNVC: 2

7 Dec 2012

5120-12-149-6894
Stoeszelhalter

121496894
1682027001: RNCC: 3 | RNVC: 2
9689160191: RNCC: 5 | RNVC: 2
EFEP311: RNCC: 5 | RNVC: 2
91739775: RNCC: 5 | RNVC: 2
KDEP2912: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-2602
Torque Wrench Adapter

123882602
40675: RNCC: 3 | RNVC: 2

7 Mar 2012

5120-12-155-9494
Hand Screw Starter

121559494
NM260: RNCC: 3 | RNVC: 2
NM260: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-332-8457
Socket Head Screw Key Set

123328457
6-820: RNCC: 3 | RNVC: 2

27 Sep 1993

5120-12-365-0101
Flat Tip Screwdriver

123650101
4-606: RNCC: 3 | RNVC: 2

23 Nov 2004

5120-12-376-8668
Wrench

123768668
233128: RNCC: 3 | RNVC: 2
94485-950.01: RNCC: 5 | RNVC: 2

13 Nov 2008

5120-12-364-3379
Socket Wrench Socket

123643379
02010017-TCS: RNCC: 3 | RNVC: 2

11 Sep 2004

5120-12-163-6620
Ausziehvorrichtung

121636620
26-21C1197G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-175-2499
Haltevorrichtung

121752499
VG95211-ML-121752499: RNCC: 2 | RNVC: 2
EV4-856: RNCC: 3 | RNVC: 2
EV4-856: RNCC: 5 | RNVC: 9

4 Sep 1978

5120-12-191-4080
Aufnahmevorrichtung

121914080
NO PRIMARY REF 12-191-4080: RNCC: 3 | RNVC: 2
H232/17: RNCC: 5 | RNVC: 9

1 Feb 1982

5120-12-196-3970
Sheet Metalworking Dolly Block

121963970
323-39: RNCC: 3 | RNVC: 2
323145: RNCC: 5 | RNVC: 2

4 Jul 1983

5120-12-329-1941
W Spannvorrichtung

123291941
VM327: RNCC: 3 | RNVC: 2

22 Jul 1992

5120-12-332-6137
Spanner Wrench

123326137
532117-8071.907: RNCC: 3 | RNVC: 2
532117-8071.907: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-174-7355
Montagewerkzeug

121747355
105-45041W19: RNCC: 3 | RNVC: 2

25 Jul 1978

5120-12-174-6524
Mechanical Jack Handle

121746524
0005832245: RNCC: 3 | RNVC: 2

17 Jul 1978

5120-12-390-0731
Plier Clamp

123900731
KV1039: RNCC: 3 | RNVC: 2

1 Oct 2012

5120-12-363-2194
Spanner Wrench

123632194
F30378170: RNCC: 3 | RNVC: 2

13 May 2004

5120-12-381-3089
Socket Wrench Handle

123813089
635900: RNCC: 3 | RNVC: 2

1 Feb 2010

5120-12-360-8018
Drift Punch

123608018
BLZ020-0008: RNCC: 3 | RNVC: 2

11 Jul 2003

5120-12-194-1741
Socket Wrench Screwdriver Attachment

121941741
3S51445-0000: RNCC: 3 | RNVC: 2
MAGERD 1639: RNCC: 5 | RNVC: 9

7 Oct 1982

5120-12-174-7241
Socket Head Screw Key Set

121747241
JD5120-12-174-7241: RNCC: 3 | RNVC: 2
1997M11T: RNCC: 3 | RNVC: 2
105945: RNCC: 5 | RNVC: 2

25 Jul 1978

5120-12-306-0078
Socket Wrench Set

123060078
NO PRIMARY REF 12-306-0078: RNCC: 3 | RNVC: 2
884: RNCC: 5 | RNVC: 9

20 Jan 1986

5120-12-381-7810
Hand Hammer

123817810
WZ-GH-50 755500: RNCC: 3 | RNVC: 2

30 Mar 2010

5120-12-330-0167
Schluessel

123300167
9689160131: RNCC: 3 | RNVC: 2
91729485: RNCC: 5 | RNVC: 2

22 Oct 1992

5120-12-145-8048
Mechanical Puller

121458048
837589113300: RNCC: 3 | RNVC: 2
8375891133: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-365-9164
Swivel Knob Jeweler's Screwdriver

123659164
T4877X 15: RNCC: 3 | RNVC: 2

17 Feb 2005

Load More Results