What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 24 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 24 of 62

5120-12-187-4798
Face Spanner Wrench Socket

121874798
30AM020: RNCC: 3 | RNVC: 2

8 Apr 1981

5120-12-349-4040
Mechan Druckstueck

123494040
0986617224: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-141-9787
Open End Wrench

121419787
571A203B1 1-8IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-308-0196
Socket Wrench Crowfoot Attachment

123080196
8-6906.01: RNCC: 2 | RNVC: 2
8-6906.01: RNCC: 3 | RNVC: 2
8-6906.01: RNCC: 5 | RNVC: 2
9851651: RNCC: 5 | RNVC: 2
8-6906.01: RNCC: 5 | RNVC: 9
9851651: RNCC: 5 | RNVC: 9

21 Aug 1986

5120-12-368-0400
Brake Shoe Adjusting Tool

123680400
80996076006: RNCC: 3 | RNVC: 2
80.99607-6006: RNCC: 5 | RNVC: 2

23 Nov 2005

5120-12-130-3261
Rubber Mallet

121303261
DIN5128-A900S90: RNCC: 2 | RNVC: 2
2455: RNCC: 3 | RNVC: 2
23907: RNCC: 3 | RNVC: 2
6650-5: RNCC: 3 | RNVC: 2
A900SDIN5128-90: RNCC: 5 | RNVC: 2
00.73.63.88: RNCC: 5 | RNVC: 2
9C: RNCC: 5 | RNVC: 2
84-100090PT34: RNCC: 5 | RNVC: 9
23907: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-1317
Torque Wrench Adapter

121711317
F11-49003-0028: RNCC: 3 | RNVC: 2

9 Sep 1977

5120-12-163-0533
Halter

121630533
TK-E41M-5180-009-18: RNCC: 2 | RNVC: 2
143 200: RNCC: 3 | RNVC: 2
80-99622-0013: RNCC: 5 | RNVC: 2
80996220013: RNCC: 5 | RNVC: 2
143200: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1225
Blacksmith's Punch

121261225
DIN5253-A20S: RNCC: 2 | RNVC: 2
5056020020: RNCC: 3 | RNVC: 2
25-20: RNCC: 3 | RNVC: 2
5056.02-20: RNCC: 5 | RNVC: 2
A20SDIN5253: RNCC: 5 | RNVC: 2
5056-02-20: RNCC: 5 | RNVC: 9
5056ES20: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-375-4227
Torque Wrench Adapter

123754227
725QR/20: RNCC: 3 | RNVC: 2
58253020: RNCC: 5 | RNVC: 2

30 May 2008

5120-12-154-2563
Spanner Wrench

121542563
5191154-200-09: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-340-1980
Schluesseleinsatz

123401980
0851 6253: RNCC: 3 | RNVC: 2

13 Mar 1996

5120-12-374-3619
Socket Wrench Socket

123743619
03020019-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-349-4019
Richt- Platte

123494019
0986612134: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-041-2686

5120-12-392-7477
Open End Box Wrench

123927477
SEWZG023: RNCC: 3 | RNVC: 2

4 Jul 2013

5120-12-322-0251
Pipe Wrench

123220251
90600661000001: RNCC: 3 | RNVC: 2

18 Jul 1990

5120-12-321-6127
Face Spanner Wrench Socket

123216127
272.369 544: RNCC: 2 | RNVC: 2
272.369 544: RNCC: 3 | RNVC: 2
CTWH-KPT10R: RNCC: 5 | RNVC: 2

7 Jun 1990

5120-12-129-4510

5120-12-375-2941
Ratchet Screwdriver

123752941
1.062.4: RNCC: 3 | RNVC: 2
4012929106240: RNCC: 5 | RNVC: 2

16 May 2008

5120-12-363-9539
Bearing And Bushing Inserter

123639539
T670P5001298: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-181-5811
Einpreszwerkzeug

121815811
312589101500: RNCC: 3 | RNVC: 9

3 Dec 1979

5120-12-336-2980
Bearing And Bushing Inserter

123362980
8044 798 051: RNCC: 3 | RNVC: 2
8044798051: RNCC: 5 | RNVC: 2
0694839: RNCC: 5 | RNVC: 2

8 Nov 1994

5120-12-374-7859
Aligning Punch

123747859
950589006100: RNCC: 3 | RNVC: 2

20 Mar 2008

5120-12-010-9652

5120-12-341-0746
Aligning Punch

123410746
80996230030: RNCC: 3 | RNVC: 2
1X56137579: RNCC: 5 | RNVC: 2

25 Jul 1996

5120-12-193-0153
Bearing And Bushing Inserter

121930153
460589001400: RNCC: 3 | RNVC: 2

14 Jun 1982

5120-12-199-6640
Mechanical Puller

121996640
111589083300: RNCC: 3 | RNVC: 2

19 May 1984

5120-12-390-4963
Box Wrench Set

123904963
517.0222: RNCC: 3 | RNVC: 2

16 Nov 2012

5120-12-349-4036
Pliers

123494036
0986612120: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-146-2973
L Aufdrueck- Huelse

121462973
4015891561: RNCC: 3 | RNVC: 2
401589156100: RNCC: 5 | RNVC: 2
4015891561: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-8967
Tap Extractor

123688967
33-4B: RNCC: 3 | RNVC: 2
01.98.82.94: RNCC: 5 | RNVC: 2

4 May 2006

5120-12-342-0623
Lamp Extractor

123420623
1.90.900.004: RNCC: 3 | RNVC: 2

5 Dec 1996

5120-12-343-0771
Socket Wrench Handle Bar

123430771
1085: RNCC: 3 | RNVC: 2
14703: RNCC: 5 | RNVC: 2

25 Apr 1997

5120-12-339-5795
Quick Adjusting Screw Clamp

123395795
51104440: RNCC: 3 | RNVC: 9

7 Dec 1995

5120-12-141-6643
Hand Tube Bender

121416643
636D502B5-16IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-332-4590
Kolbenst Auszieher

123324590
467-431/0851-08-00-00: RNCC: 3 | RNVC: 2
9108510201: RNCC: 5 | RNVC: 2

12 Aug 1993

5120-12-389-7425
Aufbl Steuergeraet

123897425
0800000201: RNCC: 3 | RNVC: 2

20 Aug 2012

5120-12-177-2968
Combination Box And Open End Wrench

121772968
13-32: RNCC: 3 | RNVC: 2
40083232: RNCC: 5 | RNVC: 2

24 Jan 1979

5120-12-380-5169
Socket Wrench

123805169
1878256886: RNCC: 3 | RNVC: 2

4 Nov 2009

5120-12-336-5860
Montierdorn

123365860
0852 2993: RNCC: 3 | RNVC: 2
8522993: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-379-3573
Socket Wrench Set

123793573
7819JE: RNCC: 3 | RNVC: 2
07314151837976: RNCC: 5 | RNVC: 2
7314151837976: RNCC: 5 | RNVC: 9

15 Jul 2009

5120-12-335-0661
Torque Wrench Adapter

123350661
F30376205: RNCC: 3 | RNVC: 2

19 Jul 1994

5120-12-360-1156
Seal Inserter

123601156
399 19 00: RNCC: 3 | RNVC: 2

8 Apr 2003

5120-12-380-5635
Screwdriver Bit

123805635
00657: RNCC: 3 | RNVC: 2
284-T20-T25: RNCC: 5 | RNVC: 2

9 Nov 2009

5120-12-333-5669
Seal Inserter

123335669
1841801: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-149-5306
Spanner Wrench

121495306
7745J: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-134-2695
Spannvorrichtung

121342695
VM74605: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-351-4408
Montierdorn

123514408
8343 798 651: RNCC: 3 | RNVC: 2

26 Jul 2000

5120-12-155-9407
Pliers

121559407
NM275: RNCC: 3 | RNVC: 2
NM275: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-3150
Socket Wrench Socket

123643150
01140008-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-384-7093
Me Puller Carrier

123847093
I002762: RNCC: 3 | RNVC: 2

22 Mar 2011

5120-12-091-4762

5120-12-387-7120
Mechanical Puller Adapter

123877120
F6781672: RNCC: 3 | RNVC: 2

26 Jan 2012

5120-12-368-1026
Socket Head Screw Key

123681026
43260006-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-325-8344
Ratchet Wrench

123258344
1320M-13X14: RNCC: 3 | RNVC: 2
174068: RNCC: 5 | RNVC: 2

12 Jul 1991

5120-12-336-5871
Montierdorn

123365871
0852 5026: RNCC: 3 | RNVC: 2
8525026: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-357-0261
Socket Wrench Socket

123570261
5206712: RNCC: 3 | RNVC: 2

25 Apr 2002

5120-12-199-0763
Hand Terminal Crimping Tool

121990763
K2: RNCC: 3 | RNVC: 2

23 Mar 1984

5120-12-199-4981
Screw Thread Insert Extractor

121994981
SRM 0407 R: RNCC: 3 | RNVC: 2
SRM 0407 R: RNCC: 5 | RNVC: 9

3 May 1984

5120-12-342-1901
Electronic Equipment Alignment Tool

123421901
1-415: RNCC: 3 | RNVC: 2
06L8101: RNCC: 5 | RNVC: 2

24 Dec 1996

5120-12-320-8176
Mechanical Puller Forcing Screw

123208176
99346044: RNCC: 3 | RNVC: 2

20 Feb 1990

5120-12-170-6927
Spanner Wrench

121706927
1213-100-5: RNCC: 3 | RNVC: 2
1213-100-5: RNCC: 5 | RNVC: 9

28 Jul 1977

5120-12-194-0818
Torque Wrench Adapter

121940818
TL5120-0086-150: RNCC: 2 | RNVC: 2
731A/10-7/16: RNCC: 5 | RNVC: 9
20/DC-7/16: RNCC: 5 | RNVC: 9
58611028: RNCC: 5 | RNVC: 9
731A/10 7/16: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-195-9019
Bung Wrench

121959019
8100068-00-08: RNCC: 2 | RNVC: 2
6422571: RNCC: 3 | RNVC: 2
8100068-00-08: RNCC: 5 | RNVC: 9

28 Apr 1983

5120-12-147-1984
Torque Wrench

121471984
DSG-0S: RNCC: 3 | RNVC: 2
DSGO: RNCC: 5 | RNVC: 2
169125703: RNCC: 5 | RNVC: 2
103050: RNCC: 5 | RNVC: 2
DSG0: RNCC: 5 | RNVC: 9
7101-86-29-10: RNCC: 5 | RNVC: 9
7101-86-29.10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-301-7338
Spanner Wrench

123017338
DIN1810-A320-345: RNCC: 2 | RNVC: 2
DIN1810A320-345: RNCC: 3 | RNVC: 2
52100220: RNCC: 5 | RNVC: 2
54791: RNCC: 5 | RNVC: 2
DIN1810A320-345: RNCC: 5 | RNVC: 9

7 Nov 1984

5120-12-123-4959
Hand Hammer

121234959
031A232: RNCC: 3 | RNVC: 2
1942: RNCC: 3 | RNVC: 2
323-22: RNCC: 3 | RNVC: 2
173K: RNCC: 3 | RNVC: 2
323055: RNCC: 5 | RNVC: 2
5142980006: RNCC: 5 | RNVC: 2
56710: RNCC: 5 | RNVC: 2
3728: RNCC: 5 | RNVC: 9
107608: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-172-0041
Open End Wrench

121720041
12A7-16: RNCC: 3 | RNVC: 2
40462828: RNCC: 5 | RNVC: 2
40-46-28-28: RNCC: 6 | RNVC: 9
1C8418: RNCC: 6 | RNVC: 9
12A40-46-28-28: RNCC: 6 | RNVC: 9

8 Dec 1977

5120-12-140-9709
Mechanical Puller

121409709
2895-022: RNCC: 3 | RNVC: 2
2895022: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-147-5927
Mechanical Puller

121475927
3MA283: RNCC: 3 | RNVC: 2
3MA283: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-384-0573
Bearing And Bushing Remover

123840573
F30378509: RNCC: 3 | RNVC: 2

17 Jan 2011

5120-12-386-0626
Tool Handle Wedge

123860626
DKBE034: RNCC: 3 | RNVC: 2

4 Aug 2011

5120-12-375-9758
Blindn Nietzugkopf

123759758
349323: RNCC: 3 | RNVC: 2

28 Jul 2008

5120-12-134-4964

5120-12-384-6987
Open End Wrench

123846987
I010636: RNCC: 3 | RNVC: 2

21 Mar 2011

5120-12-384-1156
Caulking Gun

123841156
980.1050: RNCC: 3 | RNVC: 2

24 Jan 2011

5120-12-139-3142
Dorn

121393142
8205890943: RNCC: 3 | RNVC: 2
016M03100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-194-9679
Mechanical Puller Attachment

121949679
01TC34269: RNCC: 3 | RNVC: 2

23 Dec 1982

5120-12-317-5197
Zange Einsatz

123175197
F18802: RNCC: 3 | RNVC: 2

14 Apr 1989

5120-12-127-6724
Hammer Mit Aufsteck

121276724
700700045: RNCC: 3 | RNVC: 2
700700045: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-362-3799
Abzieh- Und Aufdrue

123623799
5580060723: RNCC: 3 | RNVC: 2
F6451118: RNCC: 5 | RNVC: 2

13 Feb 2004

5120-12-335-3190
Torque Wrench

123353190
730/2BW UND 735/4: RNCC: 3 | RNVC: 1
730/2 UND 735/4: RNCC: 5 | RNVC: 9
730R/2BW: RNCC: 5 | RNVC: 9
5120-40340: RNCC: 6 | RNVC: 9

9 Aug 1994

5120-12-188-7665
Machinist's Vise

121887665
TL5120-0123-2: RNCC: 2 | RNVC: 2
9-252: RNCC: 3 | RNVC: 2
07L3280: RNCC: 5 | RNVC: 2

28 Jul 1981

5120-12-336-5862
Montierdorn

123365862
0852 3030: RNCC: 3 | RNVC: 2
8523030: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-346-0956
Pliers

123460956
150300: RNCC: 3 | RNVC: 2

9 Jun 1998

5120-12-338-9382
Rubber Mallet

123389382
1H0721173: RNCC: 3 | RNVC: 9

13 Sep 1995

5120-12-151-6568
Geh Nietvorrichtung

121516568
2B2001U1V22: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-311-1248
Werkst Druckstueck

123111248
217199-M: RNCC: 3 | RNVC: 2

28 Jul 1987

5120-12-163-0536

5120-12-198-6859
Mechanical Puller Forcing Screw

121986859
VG95211-ML-121986859: RNCC: 2 | RNVC: 2
01500669720: RNCC: 3 | RNVC: 2

17 Feb 1984

5120-12-384-7474
Seal Inserter

123847474
F6376600: RNCC: 3 | RNVC: 2

24 Mar 2011

5120-12-149-5875

5120-12-358-4161
Rohr- Zange

123584161
7140660: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-12-355-3188
Schluesseleinsatz

123553188
4086544: RNCC: 3 | RNVC: 2
6002.214.00.00: RNCC: 5 | RNVC: 2

31 Oct 2001

5120-12-311-6796
Seal Inserter

123116796
80996040067: RNCC: 3 | RNVC: 2
80.99604.0067: RNCC: 5 | RNVC: 2
V1012: RNCC: 5 | RNVC: 2

6 Oct 1987

5120-12-156-7008
Spanner Wrench

121567008
32E02030019: RNCC: 3 | RNVC: 2
32E02030019: RNCC: 5 | RNVC: 9
32E02030019: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-351-4406
Bearing And Bushing Inserter

123514406
8343 798 051: RNCC: 3 | RNVC: 2

26 Jul 2000

5120-12-309-0171
Seal Inserter

123090171
1X56124658: RNCC: 3 | RNVC: 2
8209827: RNCC: 5 | RNVC: 9

8 Dec 1986

5120-12-121-1104
Drive Pin Punch Set

121211104
574D021AND201B: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-120-6589
Socket Wrench Socket

121206589
900A-13/16: RNCC: 3 | RNVC: 2
52A13-16: RNCC: 3 | RNVC: 2
50-6-13-16: RNCC: 3 | RNVC: 2
043323: RNCC: 5 | RNVC: 2
03430042: RNCC: 5 | RNVC: 2
00506333: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-300-3345
Flat Tip Screwdriver

123003345
1099-200X8X10: RNCC: 3 | RNVC: 2
05110150001: RNCC: 3 | RNVC: 2
378B-1,6X10X200: RNCC: 5 | RNVC: 2
110150: RNCC: 5 | RNVC: 9
332-07230: RNCC: 5 | RNVC: 9
378B-110150: RNCC: 5 | RNVC: 9

25 Jul 1984

5120-12-335-0657
Seal Inserter

123350657
F6090873: RNCC: 3 | RNVC: 2

19 Jul 1994

5120-12-333-5739
Zentrier- Ring

123335739
425589032100: RNCC: 3 | RNVC: 2
425589032100: RNCC: 5 | RNVC: 9

6 Jan 1994

5120-12-183-7951
Montier- Dorn

121837951
3552015: RNCC: 3 | RNVC: 2

20 May 1980

5120-12-335-9392
Mechanical Puller

123359392
0850 0949: RNCC: 3 | RNVC: 2
8500949: RNCC: 5 | RNVC: 2

4 Oct 1994

5120-12-365-9635
Schluessel

123659635
463589026300: RNCC: 3 | RNVC: 2

22 Feb 2005

5120-12-368-2139
Socket Wrench Socket

123682139
01530028-TCS: RNCC: 3 | RNVC: 2

9 Jan 2006

5120-12-393-5610
Spanner Wrench

123935610
7186417: RNCC: 3 | RNVC: 2

24 Sep 2013

5120-12-123-5903

5120-12-365-9444
Electronic Equipment Alignment Tool

123659444
T4842 15: RNCC: 3 | RNVC: 2

21 Feb 2005

5120-12-390-1211
Seal Installation Tool

123901211
904589041500: RNCC: 3 | RNVC: 2

8 Oct 2012

5120-12-040-6774

5120-12-392-9793
Socket Head Screw Key

123929793
508 103 40: RNCC: 3 | RNVC: 2
4007157221599: RNCC: 5 | RNVC: 2

29 Jul 2013

5120-12-391-3264
Plug Electrical Connector Extractor

123913264
1576: RNCC: 3 | RNVC: 2
74620026: RNCC: 5 | RNVC: 2

6 Mar 2013

5120-12-389-3380
Face Spanner Wrench Socket

123893380
639589010700: RNCC: 3 | RNVC: 2
639589010700: RNCC: 5 | RNVC: 2

22 Jun 2012

5120-12-311-6482
Aufstec Schluessel

5120-12-050-3003

5120-12-369-0557
Inserted Hammer Face

123690557
3206040: RNCC: 3 | RNVC: 2
00.74.82.13: RNCC: 5 | RNVC: 2

17 May 2006

5120-12-139-3161

5120-12-136-0409
Gelenkhebel- Heber

121360409
211011031: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-195-9044
Montierwerk Huelse

121959044
HL12: RNCC: 3 | RNVC: 2
C 5791 516 CD: RNCC: 5 | RNVC: 2
C5791516CD: RNCC: 5 | RNVC: 2
C 5791 516 CD: RNCC: 5 | RNVC: 2
C5791516CD: RNCC: 5 | RNVC: 2

3 May 1983

5120-12-368-8183
Socket Wrench Screwdriver Attachment

123688183
3210-IN 1/2: RNCC: 3 | RNVC: 2
00.49.88.41: RNCC: 5 | RNVC: 2

25 Apr 2006

5120-12-070-1308
Blindstecker

120701308
5057569-2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-364-5514
Swivel Knob Jeweler's Screwdriver

123645514
47510002-TCS: RNCC: 3 | RNVC: 2

8 Oct 2004

5120-12-365-9150
Swivel Knob Jeweler's Screwdriver

123659150
T4880X 12: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-390-4029
Bearing And Bushing Inserter

123904029
F30450839: RNCC: 3 | RNVC: 2

8 Nov 2012

5120-12-170-8651
Spanner Wrench

121708651
250530: RNCC: 3 | RNVC: 2
250530: RNCC: 5 | RNVC: 2
250530: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-020-5616

5120-12-371-8522
Dreh Haltewerkzeug

123718522
2300264-264100.06.0: RNCC: 3 | RNVC: 2

22 May 2007

5120-12-164-6325
Spanner Wrench

121646325
264-258: RNCC: 3 | RNVC: 2
264-258: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-155-8270
Offset Screwdriver

121558270
NO PRIMARY REF 12-155-8270: RNCC: 3 | RNVC: 2
2049-4: RNCC: 5 | RNVC: 9
920B4X4: RNCC: 5 | RNVC: 9
106076: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-6184
Socket Wrench Socket

123886184
880LG-11: RNCC: 3 | RNVC: 2
4000896040704: RNCC: 5 | RNVC: 2

4 Apr 2012

5120-12-342-2428
Bearing And Bushing Inserter And Remover

123422428
80996060196: RNCC: 3 | RNVC: 2
80.99606-0196: RNCC: 5 | RNVC: 2

9 Jan 1997

5120-12-154-1809
Antrie Halteplatte

121541809
0676109000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-159-5790
Socket Wrench Extension

121595790
6365890209: RNCC: 3 | RNVC: 2
636589020900: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-133-3708

5120-12-365-9178
Swivel Knob Jeweler's Screwdriver

123659178
T4881X 08: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-010-9612

5120-12-021-2459

5120-12-367-1421
Seal Inserter

123671421
F30377883: RNCC: 3 | RNVC: 2

12 Jul 2005

5120-12-135-2096

5120-12-343-0369
Socket Head Screw Key Set

123430369
4409S: RNCC: 3 | RNVC: 2

24 Apr 1997

5120-12-329-2517
Bearing And Bushing Inserter

123292517
2051: RNCC: 3 | RNVC: 2

28 Jul 1992

5120-12-368-8073
Combination Box And Open End Wrench

123688073
40100808-TCS: RNCC: 3 | RNVC: 2

24 Apr 2006

5120-12-381-7605
Mounting Punch

123817605
MTDL206000200XXXXX: RNCC: 3 | RNVC: 2

26 Mar 2010

5120-12-337-6651
Socket Wrench

123376651
9291381080: RNCC: 3 | RNVC: 2

23 Mar 1995

5120-12-364-6802
Socket Wrench Socket

123646802
03020016-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-316-6832
Socket Wrench

123166832
DIN3112-K27: RNCC: 2 | RNVC: 2
K27DIN3112: RNCC: 5 | RNVC: 2

1 Feb 1989

5120-12-199-9086
Offset Screwdriver

121999086
52 795020: RNCC: 3 | RNVC: 9

15 Jun 1984

5120-12-021-2450

5120-12-342-2452
Socket Wrench Socket

123422452
40DL-9: RNCC: 3 | RNVC: 2
01240009: RNCC: 5 | RNVC: 2

9 Jan 1997

5120-12-133-3713
Spanner Wrench

121333713
499201-3161: RNCC: 2 | RNVC: 2
499201-3161: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-319-4225
Box Wrench

123194225
H10KU12-80: RNCC: 3 | RNVC: 2
058202080: RNCC: 5 | RNVC: 2

29 Sep 1989

5120-12-151-6566
Gehae Nietunterlage

121516566
1004-0100V4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-139-2501
Abpreszvorrichtung

121392501
070M00700: RNCC: 3 | RNVC: 2
VQ54273: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-092-2297

5120-12-126-3050

5120-12-126-5429
Einstell- Dorn

121265429
1805890027: RNCC: 3 | RNVC: 2
1805890027: RNCC: 3 | RNVC: 9
180589002700: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-366-9514
Auswechs Klemmteil

123669514
0986611508: RNCC: 3 | RNVC: 2

23 Jun 2005

5120-12-364-3446
Socket Wrench Attachment Universal Joint

123643446
12021000-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-330-3461
Montierhuelse

123303461
2653-990900.01: RNCC: 2 | RNVC: 2
2653-990900.01: RNCC: 3 | RNVC: 2

4 Dec 1992

5120-12-023-2436

5120-12-094-0326

5120-12-349-4715
Torque Wrench Adapter

123494715
2300211-991003.000.0: RNCC: 2 | RNVC: 2
2300211-991003.000.0: RNCC: 3 | RNVC: 2

18 Nov 1999

5120-12-350-2281
Montage- Hebel

123502281
5600023-970200.002.0: RNCC: 2 | RNVC: 2
5600023-970200.002.0: RNCC: 3 | RNVC: 2

1 Mar 2000

5120-12-383-9160
Lifting Pneumatic Bag

123839160
3110003300: RNCC: 3 | RNVC: 2

22 Dec 2010

5120-12-384-8443
Pipe Mounting Tool

123848443
W3: RNCC: 3 | RNVC: 2

4 Apr 2011

5120-12-306-5815
Schluessel

123065815
3V2285A: RNCC: 3 | RNVC: 2
3V2285A: RNCC: 5 | RNVC: 9

12 Mar 1986

5120-12-384-0811
Bearing Staking Installation Tool

123840811
F30371518: RNCC: 3 | RNVC: 2

19 Jan 2011

5120-12-126-6546
Clamp Base Bench Vise

121266546
47-4: RNCC: 3 | RNVC: 2
8324-4: RNCC: 3 | RNVC: 2
80DIN7202: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-182-2061
Socket Wrench

121822061
VW796: RNCC: 3 | RNVC: 9

18 Jan 1980

5120-12-337-4829
Socket Wrench

123374829
375-E6: RNCC: 3 | RNVC: 2

9 Mar 1995

5120-12-129-6234
Spanner Wrench

121296234
4027751: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-370-9906
Swivel Knob Jeweler's Screwdriver

123709906
4-391: RNCC: 3 | RNVC: 2

24 Jan 2007

5120-12-331-6210
Mechanical Puller Attachment

123316210
1000173-992000.007.0: RNCC: 2 | RNVC: 2
1000173-992000.007.0: RNCC: 3 | RNVC: 2

1 Jun 1993

5120-12-369-0428
Tap And Reamer Wrench

123690428
140-8: RNCC: 3 | RNVC: 2
01.41.53.88: RNCC: 5 | RNVC: 2

16 May 2006

5120-12-190-6689
Socket Wrench

121906689
ZG8106G010: RNCC: 3 | RNVC: 2
5120121906689: RNCC: 5 | RNVC: 2
ZG8106G010: RNCC: 5 | RNVC: 2
ZG8106G010: RNCC: 5 | RNVC: 9
ZG 8106 G 010: RNCC: 5 | RNVC: 9
ZG 8106 G 010: RNCC: 5 | RNVC: 9

8 Dec 1981

5120-12-141-6663
Socket Head Screw Key

121416663
571F002BL3-32IN: RNCC: 3 | RNVC: 2
6308L3-32IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-336-2998
Driftpin

123362998
5306-0011-100000: RNCC: 3 | RNVC: 2

9 Nov 1994

5120-12-126-1609
Slip Joint Pliers

121261609
DIN5231-B380GERAUHT: RNCC: 2 | RNVC: 2
760-4: RNCC: 3 | RNVC: 2
145-15: RNCC: 3 | RNVC: 2
583901938: RNCC: 5 | RNVC: 2
3901938: RNCC: 5 | RNVC: 2
08130: RNCC: 5 | RNVC: 2
B380DIN5231LGERAUHT: RNCC: 5 | RNVC: 2
5371980004: RNCC: 5 | RNVC: 9
583901938: RNCC: 5 | RNVC: 9
583901938: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-328-6986
Mechanical Puller

123286986
F6375399: RNCC: 3 | RNVC: 2

16 Jun 1992

5120-12-345-3723
Mechanical Puller

123453723
Y4098729: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-177-6326
Gegenhalter

121776326
331650: RNCC: 3 | RNVC: 2
331650: RNCC: 3 | RNVC: 9
0331650: RNCC: 5 | RNVC: 9

9 Feb 1979

5120-12-384-7506
Shaf Mounting Tool

123847506
F6550797: RNCC: 3 | RNVC: 2

25 Mar 2011

5120-12-328-6470
Bearing And Bushing Inserter

123286470
F30149484: RNCC: 3 | RNVC: 2

11 Jun 1992

5120-12-044-4883

5120-12-149-5848

5120-12-041-5635

5120-12-139-3010
Mechanical Puller

121393010
8375890733: RNCC: 3 | RNVC: 2
005M00800: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-198-9659
Bearing And Bushing Inserter

121989659
01TC33019: RNCC: 3 | RNVC: 2

16 Mar 1984

5120-12-388-5776
Socket Wrench Screwdriver Attachment

123885776
8806-PH4: RNCC: 3 | RNVC: 2
4000896039876: RNCC: 5 | RNVC: 2

2 Apr 2012

5120-12-312-4545
Spanner Wrench

123124545
961568: RNCC: 3 | RNVC: 2

8 Jan 1988

5120-12-383-8409
Offset Screwdriver

123838409
0831400C: RNCC: 3 | RNVC: 2

13 Dec 2010

5120-12-387-7064
Rotat Holding Tool

123877064
F6553672: RNCC: 3 | RNVC: 2

25 Jan 2012

5120-12-384-6259
Mounting Punch

123846259
F6785073: RNCC: 3 | RNVC: 2

14 Mar 2011

5120-12-041-2711

5120-12-330-5542
Stud Inserter

123305542
0851 0492: RNCC: 3 | RNVC: 2
8510492: RNCC: 5 | RNVC: 2

8 Jan 1993

5120-12-130-9078
Socket Wrench Ratchet Attachment

121309078
1450-9: RNCC: 3 | RNVC: 2
6951: RNCC: 3 | RNVC: 2
108976: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-313-8569
Spanner Wrench

123138569
HN19: RNCC: 3 | RNVC: 2

12 May 1988

5120-12-384-3829
Piston Inserter

123843829
F6557121: RNCC: 3 | RNVC: 2

18 Feb 2011

5120-12-129-7605
Pliers

121297605
3841190: RNCC: 3 | RNVC: 2
2458: RNCC: 5 | RNVC: 9
4003773017141: RNCC: 5 | RNVC: 9
106325: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-0786
Hand Terminal Crimping Tool

121990786
S3D1: RNCC: 3 | RNVC: 2
S3D1: RNCC: 5 | RNVC: 9

23 Mar 1984

5120-12-358-8684
Combination Box And Open End Wrench Set

123588684
96593411: RNCC: 3 | RNVC: 2

22 Nov 2002

5120-12-330-0052
Mechanical Puller

123300052
8520366: RNCC: 3 | RNVC: 2
0853 0366: RNCC: 5 | RNVC: 2
0852 0366: RNCC: 5 | RNVC: 2

21 Oct 1992

5120-12-358-7760
Bearing And Bushing Inserter

123587760
80996040174: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-091-6296

5120-12-145-6831

5120-12-301-6707
Open End Wrench

123016707
894-25: RNCC: 3 | RNVC: 2
657565: RNCC: 5 | RNVC: 2
8209-790: RNCC: 5 | RNVC: 2
8431897: RNCC: 5 | RNVC: 2

1 Nov 1984

5120-12-156-1553
Pliers

121561553
NM482: RNCC: 3 | RNVC: 2
NM482: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5086

5120-12-383-5008
Vise Jaw Set

123835008
5.4084: RNCC: 3 | RNVC: 2

28 Oct 2010

5120-12-150-4478
Sperrvorrichtung

121504478
838589015900: RNCC: 3 | RNVC: 2
8385890159: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-137-2267

5120-12-334-9620
Spanner Wrench

123349620
748.108.5: RNCC: 3 | RNVC: 2

6 Jul 1994

5120-12-199-0780
Hand Terminal Crimping Tool

121990780
K6: RNCC: 3 | RNVC: 2

23 Mar 1984

5120-12-364-4736
Socket Wrench Crowfoot Attachment

123644736
02210024-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-343-3805
Socket Wrench

123433805
431 012 235 A: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-129-8808
Abziehglocke

121298808
1680506003: RNCC: 3 | RNVC: 2
EF3043: RNCC: 5 | RNVC: 2
KDAW9995-0-2: RNCC: 5 | RNVC: 9
1680506003: RNCC: 5 | RNVC: 9
EF3043: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-168-6371

5120-12-378-9970
Hand Beading Tool

123789970
07149102: RNCC: 3 | RNVC: 2
A0714 91 02: RNCC: 5 | RNVC: 2
391462153101: RNCC: 6 | RNVC: 9

10 Jun 2009

5120-12-369-0315
Hand Hammer

123690315
46307: RNCC: 3 | RNVC: 2
00.75.25.56: RNCC: 5 | RNVC: 2

16 May 2006

5120-12-368-8201
Socket Wrench Screwdriver Attachment

123688201
3220-PH2: RNCC: 3 | RNVC: 2
00.50.14.67: RNCC: 5 | RNVC: 2

25 Apr 2006

5120-12-304-6541
Torque Wrench

123046541
721-80: RNCC: 3 | RNVC: 2
909125711: RNCC: 5 | RNVC: 2

8 Aug 1985

5120-12-365-9441
Electronic Equipment Alignment Tool

123659441
Z4856 2: RNCC: 3 | RNVC: 2

21 Feb 2005

5120-12-190-7069
Hand Screw Jack

121907069
255011031C: RNCC: 3 | RNVC: 2
927.101.000: RNCC: 3 | RNVC: 2
255011031A: RNCC: 5 | RNVC: 9
251.011.031.A: RNCC: 5 | RNVC: 9
251011031A: RNCC: 5 | RNVC: 9

9 Dec 1981

5120-12-347-5454
Oelfilt Schluessel

123475454
67 600 47 111: RNCC: 3 | RNVC: 2

6 Jan 1999

5120-12-130-3394

5120-12-094-1273

5120-12-389-8125
Schloszoe Werkzeug

123898125
KV1012-0,5: RNCC: 3 | RNVC: 2

27 Aug 2012

5120-12-343-6138
Mechanical Puller

123436138
748.122.6: RNCC: 3 | RNVC: 2

8 Jul 1997

5120-12-702-9025
Spanner Wrench

127029025
4709100-80-1: RNCC: 3 | RNVC: 2

5 Sep 1996

5120-12-316-2274
Hand Hydraulic Jack

123162274
HYDRALITE 1220 BW: RNCC: 3 | RNVC: 2

2 Jan 1989

5120-12-170-7316
Lamp Extractor

121707316
LZ14-15: RNCC: 3 | RNVC: 2

2 Aug 1977

5120-12-301-2836
Spanner Wrench

123012836
41-0850/249: RNCC: 3 | RNVC: 2

5 Oct 1984

5120-12-339-3226
Bearing And Bushing Inserter

123393226
D11.59661-0446: RNCC: 3 | RNVC: 2
596-086: RNCC: 5 | RNVC: 2
596-086: RNCC: 5 | RNVC: 9
D11.59661-0446: RNCC: 5 | RNVC: 9

9 Nov 1995

5120-12-394-0118
Socket Wrench Socket

123940118
0712132315: RNCC: 3 | RNVC: 2

29 Oct 2013

5120-12-368-1102
Socket Head Screw Key

123681102
73100005-TCS: RNCC: 3 | RNVC: 2

8 Dec 2005

5120-12-392-9490
Quick Adjusting Screw Clamp

123929490
GZ10: RNCC: 3 | RNVC: 2

24 Jul 2013

5120-12-369-3412
Crimping Tool Die

123693412
974924: RNCC: 3 | RNVC: 2

22 Jun 2006

5120-12-334-8382
El Montierwerkzeug

123348382
450904-9094: RNCC: 3 | RNVC: 2

27 Jun 1994

5120-12-345-5904
Auswechs Klemmteil

123455904
R41422: RNCC: 3 | RNVC: 2

2 Apr 1998

5120-12-369-6336
Hand Hammer

123696336
2106: RNCC: 3 | RNVC: 2
00.74.08.36: RNCC: 5 | RNVC: 2

3 Aug 2006

5120-12-376-2680
Ge Montierwerkzeug

123762680
1X56 137 025: RNCC: 3 | RNVC: 2

3 Sep 2008

5120-12-196-7389
Hoisting Link

121967389
1X56136260: RNCC: 3 | RNVC: 2
1X56136260: RNCC: 5 | RNVC: 2
0535801: RNCC: 5 | RNVC: 2
535801: RNCC: 5 | RNVC: 9

9 Aug 1983

5120-12-147-3666
Dorn

121473666
050105: RNCC: 3 | RNVC: 2
WZ47: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-142-0300
Socket Wrench Socket Set

121420300
571E507AB: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-361-5438
Auf Ersatzteilsatz

123615438
416.1019: RNCC: 3 | RNVC: 2

16 Oct 2003

5120-12-131-7137
Dorn

121317137
3045890439: RNCC: 3 | RNVC: 2
3045890439: RNCC: 3 | RNVC: 9
304589043900: RNCC: 5 | RNVC: 2
304589043900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-6932
Socket Wrench Screwdriver Attachment

123686932
3210IN-17: RNCC: 3 | RNVC: 2
00.49.80.33: RNCC: 5 | RNVC: 2

6 Apr 2006

5120-12-369-0571
Inserted Hammer Face

123690571
3208040: RNCC: 3 | RNVC: 2
00.74.94.25: RNCC: 5 | RNVC: 2

17 May 2006

5120-12-308-2307
Hand Beading Tool

123082307
484 153 AND 364 417 AND 484 162: RNCC: 3 | RNVC: 2

17 Sep 1986

5120-12-364-4757
Grommet Inserting Punch And Die

123644757
1612707: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-359-6467
Mechanical Puller

123596467
15166001: RNCC: 3 | RNVC: 2

25 Feb 2003

5120-12-182-1073
Socket Wrench Set

121821073
110010AND110020AND120010: RNCC: 3 | RNVC: 9

14 Jan 1980

5120-12-383-8395
Carpenters' Pincers

123838395
0612000C: RNCC: 3 | RNVC: 2

13 Dec 2010

5120-12-364-5509
Box Wrench

123645509
41040809-TCS: RNCC: 3 | RNVC: 2

8 Oct 2004

5120-12-165-1724
Rolleneinsatz

121651724
58027543700: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-3183

5120-12-141-9782
Open End Wrench

121419782
571A203B3-4IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-308-4188
Hand Terminal Crimping Tool

123084188
NO PRIMARY REF 12-308-4188: RNCC: 3 | RNVC: 2
102.67: RNCC: 5 | RNVC: 9
102.02: RNCC: 5 | RNVC: 9
AVZ2: RNCC: 5 | RNVC: 9
20057: RNCC: 5 | RNVC: 9
10202: RNCC: 5 | RNVC: 9
87T2112-00: RNCC: 5 | RNVC: 9
AVZ2: RNCC: 5 | RNVC: 9
102.02: RNCC: 5 | RNVC: 9
5320066: RNCC: 5 | RNVC: 9

8 Oct 1986

5120-12-388-3649
Mounting Punch

123883649
722589001500: RNCC: 3 | RNVC: 2

14 Mar 2012

5120-12-196-0413
Spanner Wrench

121960413
4982035: RNCC: 3 | RNVC: 2
MAGERD 0567: RNCC: 5 | RNVC: 9

24 May 1983

5120-12-345-6835
Open End Wrench

123456835
1416401: RNCC: 3 | RNVC: 2

15 Apr 1998

5120-12-316-0816
Joint Breaking Wedge

123160816
652002: RNCC: 3 | RNVC: 2

21 Dec 1988

5120-12-194-0807
Torque Wrench Adapter

121940807
TL5120-0086-090: RNCC: 2 | RNVC: 2
20/DC-15: RNCC: 3 | RNVC: 2
731/10 15: RNCC: 3 | RNVC: 2
6263110008: RNCC: 5 | RNVC: 9
6450C-15: RNCC: 5 | RNVC: 9
7452-7 15: RNCC: 5 | RNVC: 9
F30032425: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-172-0483
Socket Wrench

121720483
6400M4-5: RNCC: 3 | RNVC: 2
157244: RNCC: 5 | RNVC: 2

13 Dec 1977

5120-12-384-9727
Open End Box Wrench

123849727
518.0518: RNCC: 3 | RNVC: 2

14 Apr 2011

5120-12-341-6354
Electronic Equipment Alignment Tool

123416354
1-164: RNCC: 3 | RNVC: 2

8 Oct 1996

5120-12-374-7279
L Einstellwerkzeug

123747279
930589002300: RNCC: 3 | RNVC: 2

11 Mar 2008

5120-12-146-5136

5120-12-355-2043
Pliers

123552043
0003-3470-170: RNCC: 3 | RNVC: 2
0003-3470-170: RNCC: 5 | RNVC: 9

22 Oct 2001

5120-12-385-2898
Mechanical Puller

123852898
11.49017-0065: RNCC: 3 | RNVC: 2
11.49017-0065: RNCC: 5 | RNVC: 2
034.155: RNCC: 5 | RNVC: 2

18 May 2011

5120-12-153-7949
Socket Wrench Socket

121537949
CH1774-16: RNCC: 3 | RNVC: 2
820589440700: RNCC: 5 | RNVC: 2
CH1774-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-372-5830
Tap Extractor

123725830
33-10B: RNCC: 3 | RNVC: 2
01.98.88.03: RNCC: 5 | RNVC: 2

1 Aug 2007

5120-12-345-2229
Mechanical Puller

123452229
8370506-00: RNCC: 3 | RNVC: 2

12 Feb 1998

5120-12-370-4219
Socket Wrench

123704219
18090016: RNCC: 3 | RNVC: 2

6 Nov 2006

5120-12-390-4945
Hand Hydraulic Jack

123904945
160.0352: RNCC: 3 | RNVC: 2

16 Nov 2012

5120-12-317-1037
Hand Tube Flaring Punch

123171037
MOS-L 12-S: RNCC: 3 | RNVC: 2
MOS-I 12-S: RNCC: 5 | RNVC: 9

10 Mar 1989

5120-12-316-8882
Rohrbieg Glaetteil

123168882
7-1/20-000-125-31412: RNCC: 3 | RNVC: 2

22 Feb 1989

5120-12-362-2934
Cross Tip Screwdriver

123622934
05008735001: RNCC: 3 | RNVC: 2
66353: RNCC: 3 | RNVC: 2
4001002663534: RNCC: 5 | RNVC: 2
6635-PH3-8,0X150: RNCC: 5 | RNVC: 2
350PH-3X150: RNCC: 5 | RNVC: 2
008735: RNCC: 5 | RNVC: 9

3 Feb 2004

5120-12-188-7647
Auszieher

121887647
406589043300: RNCC: 3 | RNVC: 2

28 Jul 1981

5120-12-334-3315
Socket Wrench

123343315
DSV35A-8: RNCC: 3 | RNVC: 2
631892: RNCC: 5 | RNVC: 2

27 Apr 1994

5120-12-324-6060
Screwdriver Bit

123246060
52222039: RNCC: 3 | RNVC: 2

6 Mar 1991

5120-12-197-1491
Schluessel

121971491
01TC32316: RNCC: 3 | RNVC: 2

26 Sep 1983

5120-12-010-5215

5120-12-185-0103
Spanner Wrench

121850103
2171-9942-000: RNCC: 3 | RNVC: 2
2171-9942-000: RNCC: 5 | RNVC: 2
2171-9942-000: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-12-388-6436
Socket Wrench

123886436
DIN896-B46X50: RNCC: 2 | RNVC: 2
518.0886: RNCC: 3 | RNVC: 2
14123: RNCC: 3 | RNVC: 2
6213660: RNCC: 3 | RNVC: 2
03800022: RNCC: 3 | RNVC: 2
26 R 46X50: RNCC: 5 | RNVC: 2
6213660: RNCC: 5 | RNVC: 2
1080 N-46X50: RNCC: 5 | RNVC: 2
26 R 46X50: RNCC: 5 | RNVC: 2

5 Apr 2012

5120-12-326-0170
Mechanical Puller Attachment

123260170
000589353400: RNCC: 3 | RNVC: 2
63-5-05-02: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-123-5497
Socket Wrench

121235497
800-1-8: RNCC: 3 | RNVC: 2
4510101: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-134-2650
Aus- Und Einbauwerk

121342650
010M03900: RNCC: 3 | RNVC: 2
VM71700-1-4: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-336-5868
Montierdorn

123365868
0852 5021: RNCC: 3 | RNVC: 2
8525021: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-126-4947
Mech Verlaengerung

121264947
19-3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-376-5771
Spanner Wrench

123765771
84-997: RNCC: 3 | RNVC: 2
118009: RNCC: 5 | RNVC: 2

17 Oct 2008

5120-12-371-4142
Hand Hammer

123714142
5293.98.1500: RNCC: 3 | RNVC: 2

27 Mar 2007

5120-12-322-6138
Socket Head Screw Key

123226138
2300223-264100.07.0: RNCC: 2 | RNVC: 2
2300223-264100.07.0: RNCC: 3 | RNVC: 2

6 Sep 1990

5120-12-161-8166

5120-12-176-2828
Einstel Schluessel

121762828
23290-268150: RNCC: 2 | RNVC: 2

23 Nov 1978

5120-12-176-3371

5120-12-025-0061

5120-12-391-0539
Bearing Staking Installation Tool

123910539
F30377289: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-12-146-7570
Spanner Wrench

121467570
02169: RNCC: 3 | RNVC: 2
25704-360400-02-0: RNCC: 5 | RNVC: 2
02169: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-186-6307
Hand Screw Starter

121866307
05030555001: RNCC: 3 | RNVC: 2
390-0,4X5,0X215: RNCC: 3 | RNVC: 2
1700 030555: RNCC: 5 | RNVC: 2
1700-0,4X5X215: RNCC: 5 | RNVC: 2
390-0-4X5-0X200: RNCC: 5 | RNVC: 9
030555: RNCC: 5 | RNVC: 9

21 Jan 1981

5120-12-193-6665

5120-12-362-8512
Socket Wrench

123628512
112894: RNCC: 3 | RNVC: 2
472M03: RNCC: 3 | RNVC: 2
001103: RNCC: 5 | RNVC: 2

6 Apr 2004

5120-12-344-1144
Schluesseleinsatz

123441144
80996120014: RNCC: 3 | RNVC: 2

15 Sep 1997

5120-12-350-3244
Drive Pin Punch

123503244
5600023-990100.004.0: RNCC: 2 | RNVC: 2
5600023-990100.004.0: RNCC: 3 | RNVC: 2

15 Mar 2000

5120-12-331-8514
Aligning Punch

123318514
523510-9002 902: RNCC: 3 | RNVC: 2

28 Jun 1993

5120-12-372-2105
Socket Wrench

123722105
091697: RNCC: 3 | RNVC: 2
908077005: RNCC: 5 | RNVC: 2

27 Jun 2007

5120-12-333-4664
Mechanical Puller Attachment

123334664
02.0125.02.00: RNCC: 3 | RNVC: 2
0201250200: RNCC: 5 | RNVC: 2

20 Dec 1993

5120-12-133-3843
Box Wrench

121333843
18A1-2X9-16: RNCC: 3 | RNVC: 2
41423234: RNCC: 5 | RNVC: 2
571C337-1-2X9-16IN: RNCC: 5 | RNVC: 9
100257: RNCC: 5 | RNVC: 9
3SZ1-2X9-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-391-7227
Hand Terminal Crimping Tool

123917227
97 53 14: RNCC: 3 | RNVC: 2
4003773041474: RNCC: 5 | RNVC: 2

28 Mar 2013

5120-12-388-0286
Repl Clamp Section

123880286
20.052.10: RNCC: 3 | RNVC: 2
0702523: RNCC: 5 | RNVC: 2

17 Feb 2012

5120-12-320-4835
Spanner Wrench

123204835
23190016: RNCC: 3 | RNVC: 9

18 Jan 1990

5120-12-139-3136

5120-12-041-5751

5120-12-131-4322
Saddler's Harness Awl Blade

121314322
264-50MM: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-342-2263
Mechanical Puller

123422263
28F40076: RNCC: 3 | RNVC: 2

8 Jan 1997

5120-12-317-1470
Hand Terminal Crimping Tool

123171470
303871274: RNCC: 3 | RNVC: 2

14 Mar 1989

5120-12-139-3101
Kolben Spannband

121393101
8205891131: RNCC: 3 | RNVC: 2
015M00500: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-134-8099

5120-12-369-6635
Blind Riveter Mandrel

123696635
09489515: RNCC: 3 | RNVC: 2

7 Aug 2006

5120-12-135-9372
Spanner Wrench

121359372
T16818-1: RNCC: 3 | RNVC: 2
T16818-1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-179-3190
C Clamp

121793190
05320: RNCC: 3 | RNVC: 9
053 ELFENBEIN: RNCC: 3 | RNVC: 9
05320: RNCC: 5 | RNVC: 2
F: RNCC: 5 | RNVC: 9

20 Jun 1979

5120-12-153-8703
Schluessel

121538703
3TS47G11659: RNCC: 3 | RNVC: 2
3TS47G11659: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-3113
Socket Head Screw Key

121563113
149120302: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-371-3541
Socket Wrench Screwdriver Attachment

123713541
3510-INL 6X220: RNCC: 3 | RNVC: 2
00.47.21.65: RNCC: 5 | RNVC: 2

20 Mar 2007

5120-12-315-3881
Pedal Adjustment Tool Compressor

123153881
503255: RNCC: 3 | RNVC: 2

19 Oct 1988

5120-12-335-4452
Mechanical Puller

123354452
0852 1514: RNCC: 3 | RNVC: 2
8521514: RNCC: 5 | RNVC: 2

18 Aug 1994

5120-12-365-9187
Socket Wrench

123659187
T4840X 35: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-382-1859
Torque Wrench Adapter

123821859
03470038-TCS: RNCC: 3 | RNVC: 2

19 May 2010

5120-12-345-5837
Socket Wrench Crowfoot Attachment

123455837
540A-1 1/4: RNCC: 3 | RNVC: 2
02 50 00 56: RNCC: 5 | RNVC: 2

2 Apr 1998

5120-12-319-4715
Socket Wrench Handle Bar

123194715
4900059-721300.000.0/2: RNCC: 3 | RNVC: 2

4 Oct 1989

5120-12-336-2813
Socket Wrench Screwdriver Attachment

123362813
54KK-5: RNCC: 3 | RNVC: 2
03280005: RNCC: 5 | RNVC: 2

7 Nov 1994

5120-12-388-3592
Flat Tip And Cross Tip Screwdriver Set

123883592
4892: RNCC: 3 | RNVC: 2
96489210: RNCC: 5 | RNVC: 2

14 Mar 2012

5120-12-345-4630
Socket Wrench Handle Bar

123454630
1683000000: RNCC: 3 | RNVC: 9

19 Mar 1998

5120-12-390-0454
Door Lock Open Tool

123900454
KV1009: RNCC: 3 | RNVC: 2

27 Sep 2012

5120-12-382-8880
Spanner Wrench

123828880
G020.032-0: RNCC: 3 | RNVC: 2
7040214: RNCC: 5 | RNVC: 2

19 Aug 2010

5120-12-385-9876
Socket Wrench Set

123859876
4009: RNCC: 3 | RNVC: 2

27 Jul 2011

5120-12-145-6151
Hebeges Spannstueck

121456151
23176-261000-09-0: RNCC: 2 | RNVC: 2
23176-261000.09.0: RNCC: 2 | RNVC: 2
23176-261000-09-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-338-4690
Piston Ring Compressor

123384690
130610: RNCC: 3 | RNVC: 2
80996130034: RNCC: 5 | RNVC: 2
3-111-KHD: RNCC: 5 | RNVC: 2
130 610: RNCC: 5 | RNVC: 9

14 Jul 1995

5120-12-314-3503
Pliers

123143503
52.0307.893.00: RNCC: 3 | RNVC: 2

29 Jun 1988

5120-12-330-5948
Hand Beading Tool

123305948
15359803: RNCC: 3 | RNVC: 2
153 598 03: RNCC: 5 | RNVC: 2

13 Jan 1993

5120-12-312-8841
Hand Hammer

123128841
5140.C-5: RNCC: 3 | RNVC: 2
55816-8-0: RNCC: 5 | RNVC: 2

16 Feb 1988

5120-12-380-1952
Socket Head Screw Key

123801952
T4718ESD15: RNCC: 3 | RNVC: 2
4718ESD TX15X80: RNCC: 5 | RNVC: 2

6 Oct 2009

5120-12-126-1203
Drill Drift

121261203
DIN317-3: RNCC: 2 | RNVC: 2
40162: RNCC: 3 | RNVC: 2
017077: RNCC: 3 | RNVC: 2
989341: RNCC: 5 | RNVC: 2
3DIN317: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-6816
Socket Wrench Attachment Universal Joint

123646816
13021000-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-133-3516
Box Wrench

121333516
1300M16X17: RNCC: 3 | RNVC: 2
103985: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-182-4163
Body And Fender Spoon

121824163
1648: RNCC: 3 | RNVC: 2
292: RNCC: 3 | RNVC: 2
10880: RNCC: 3 | RNVC: 2
3742: RNCC: 5 | RNVC: 9
1929: RNCC: 5 | RNVC: 9
5141980020: RNCC: 5 | RNVC: 9
56520: RNCC: 5 | RNVC: 9

30 Jan 1980

5120-12-021-9841

5120-12-023-2504

5120-12-342-6095
Crimping Tool Die

123426095
VG95236T11AA002: RNCC: 2 | RNVC: 2
MRP0838: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-355-0628
Open End Wrench

123550628
08.06003-9001: RNCC: 3 | RNVC: 2

1 Oct 2001

5120-12-181-5975
Driftpin

121815975
312589036100: RNCC: 3 | RNVC: 9

5 Dec 1979

5120-12-349-4041
Montierwerk Huelse

123494041
0986617232: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-326-5305
Spanner Wrench

123265305
8470272: RNCC: 3 | RNVC: 2

1 Oct 1991

5120-12-146-5141
Dorn

121465141
1X56045806: RNCC: 3 | RNVC: 2
8207173: RNCC: 5 | RNVC: 2
8470077: RNCC: 5 | RNVC: 2
W45806: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-187-9652
Crimping Tool Die

121879652
3562.0: RNCC: 3 | RNVC: 2
E6: RNCC: 5 | RNVC: 2

20 May 1981

5120-12-313-2951
Drift Pin Set

123132951
530008: RNCC: 2 | RNVC: 9

18 Mar 1988

5120-12-126-6571
Valve Spring Lifter

121266571
792-2: RNCC: 3 | RNVC: 2
52550: RNCC: 5 | RNVC: 2
2715: RNCC: 5 | RNVC: 9
106722: RNCC: 5 | RNVC: 9
2708: RNCC: 5 | RNVC: 9
5747620002: RNCC: 5 | RNVC: 9
128-1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-392-0613
Screw Thread Insert Inserter

123920613
23530201000: RNCC: 3 | RNVC: 2
RIVKLE M2007: RNCC: 5 | RNVC: 2

30 Apr 2013

5120-12-178-6473
Face Spanner Wrench Socket

121786473
01TC30056: RNCC: 3 | RNVC: 2

7 May 1979

5120-12-346-0985
Hand Hammer

123460985
1690-30: RNCC: 3 | RNVC: 2

10 Jun 1998

5120-12-151-6545
Montagevorrichtung

121516545
100199-1100V6: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-375-8058
Swivel Knob Jeweler's Screwdriver Set

123758058
6-660: RNCC: 3 | RNVC: 2

7 Jul 2008

5120-12-133-4682
Face Spanner Wrench Socket

121334682
5185892307: RNCC: 3 | RNVC: 2
023M00700: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-344-1288
Socket Wrench Extension

123441288
NO PRIMARY REF 12-344-1288: RNCC: 3 | RNVC: 2
11240003: RNCC: 5 | RNVC: 9
414-6: RNCC: 5 | RNVC: 9

16 Sep 1997

5120-12-364-6784
Socket Wrench Extension

123646784
13011002-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-392-9816
Socket Head Screw Key

123929816
35203: RNCC: 3 | RNVC: 2

29 Jul 2013

5120-12-123-5218

5120-12-363-2191
Schluesseleinsatz

123632191
F30375679: RNCC: 3 | RNVC: 2

13 May 2004

5120-12-330-4587
Wrench Extension Handle

123304587
60225: RNCC: 3 | RNVC: 2
58180001: RNCC: 5 | RNVC: 2

16 Dec 1992

5120-12-151-6567
Geh Nietvorrichtung

121516567
2B2001U1V40: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-370-1020
Magnetic Retrieving Tool

123701020
12600-270: RNCC: 3 | RNVC: 2
77260027: RNCC: 5 | RNVC: 2

20 Sep 2006

5120-12-393-2110
Hand Scissors Jack

123932110
2300399-970110.000.0: RNCC: 3 | RNVC: 2

19 Aug 2013

5120-12-198-7376
Socket Head Screw Key

121987376
1997LM11: RNCC: 3 | RNVC: 2
42L11: RNCC: 5 | RNVC: 9

22 Feb 1984

5120-12-336-5090
Bearing And Bushing Inserter

123365090
0851 4933: RNCC: 3 | RNVC: 2
8514933: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-387-7117
Rotating Members Aligning Tool

123877117
F6782971: RNCC: 3 | RNVC: 2

26 Jan 2012

5120-12-340-9387
Flat Tip Screwdriver

123409387
3055/5: RNCC: 3 | RNVC: 2
42763: RNCC: 5 | RNVC: 2

9 Jul 1996

5120-12-324-3477
Mitnehmersch Stift

123243477
F15029: RNCC: 3 | RNVC: 2

7 Feb 1991

5120-12-336-5869
Montierdorn

123365869
0852 5022: RNCC: 3 | RNVC: 2
8525022: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-362-5430
Slip Joint Pliers

123625430
54.0084.960.64: RNCC: 3 | RNVC: 2
2650: RNCC: 5 | RNVC: 2

5 Mar 2004

5120-12-391-2458
Shaf Mounting Tool

123912458
F6781202: RNCC: 3 | RNVC: 2

28 Feb 2013

5120-12-181-7434
Montier- Dorn

121817434
25300054: RNCC: 3 | RNVC: 2
2550: RNCC: 5 | RNVC: 2
2-10010-4: RNCC: 5 | RNVC: 2

14 Dec 1979

5120-12-314-4708
Tool Handle Wedge

123144708
370-KH7: RNCC: 3 | RNVC: 2
2XKH7: RNCC: 5 | RNVC: 2
KH7: RNCC: 5 | RNVC: 2

9 Jul 1988

5120-12-362-2232
Spanner Wrench

123622232
3-0600.180/00-00: RNCC: 3 | RNVC: 2
T280G30T0002: RNCC: 5 | RNVC: 2

26 Jan 2004

5120-12-360-1955
Lifting Pneumatic Bag

123601955
416.1810: RNCC: 3 | RNVC: 2

16 Apr 2003

5120-12-124-1764

5120-12-139-2511
La Haltevorrichtung

121392511
009M01700: RNCC: 3 | RNVC: 2
299000: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-186-7335
Mechanical Puller Forcing Screw

121867335
99366625: RNCC: 3 | RNVC: 2
412031: RNCC: 5 | RNVC: 2
99366646: RNCC: 5 | RNVC: 2
412031: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-044-4884

5120-12-375-9612
Nietzugst Fuehrung

123759612
349303: RNCC: 3 | RNVC: 2

24 Jul 2008

5120-12-380-3292
Seal Inserter

123803292
730589053300: RNCC: 3 | RNVC: 2

20 Oct 2009

5120-12-131-6814
Schluessel

121316814
5096408: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-195-1011
Socket Head Screw Key

121951011
1997LZ3-64: RNCC: 3 | RNVC: 2

13 Jan 1983

5120-12-332-8081
Op Montierwerkzeug

123328081
532117-8071.909: RNCC: 3 | RNVC: 2
532117-8071.909: RNCC: 5 | RNVC: 9

22 Sep 1993

5120-12-131-5351
Saddler's Sewing Awl Needle

121315351
295: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-120-6619
Socket Wrench

121206619
410900147: RNCC: 3 | RNVC: 2
8797950001: RNCC: 3 | RNVC: 9
410900147: RNCC: 5 | RNVC: 9
WZ7D6Q: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-384-8273
Hand Hammer

123848273
51.000.038: RNCC: 3 | RNVC: 2
51.000.038: RNCC: 5 | RNVC: 2

1 Apr 2011

5120-12-381-4551
Air Relea Inserter

123814551
BN3271: RNCC: 3 | RNVC: 2
04.04.72: RNCC: 5 | RNVC: 2

18 Feb 2010

5120-12-368-8277
Socket Wrench Screwdriver Attachment

123688277
3245TXL 50: RNCC: 3 | RNVC: 2
00.50.35.88: RNCC: 5 | RNVC: 2

26 Apr 2006

5120-12-335-0990
Spanner Wrench

123350990
F30006261: RNCC: 3 | RNVC: 2

22 Jul 1994

5120-12-339-7758
Torque Wrench Adapter

123397758
2300232-991003.000.0: RNCC: 3 | RNVC: 2

16 Jan 1996

5120-12-324-7170
Gear Inserter

123247170
3 11 2 620: RNCC: 3 | RNVC: 2
30 112 620: RNCC: 5 | RNVC: 9

19 Mar 1991

5120-12-333-0708
Bearing And Bushing Inserter

123330708
15.010.20052: RNCC: 3 | RNVC: 2

26 Oct 1993

5120-12-368-7697
Open End Box Wrench

123687697
121A-9/16X5/8: RNCC: 3 | RNVC: 2
00.28.06.90: RNCC: 5 | RNVC: 2

18 Apr 2006

5120-12-193-3888
Seal Inserter

121933888
460589021500: RNCC: 3 | RNVC: 2
905.7.33.203.1: RNCC: 5 | RNVC: 2

19 Jul 1982

5120-12-393-8696
Ten Mounting Tools

123938696
7077748: RNCC: 3 | RNVC: 2

17 Oct 2013

5120-12-380-2487
Hand Roller

123802487
125.586: RNCC: 3 | RNVC: 2

9 Oct 2009

5120-12-126-3049

5120-12-195-9043
Montierwerk Huelse

121959043
HL10: RNCC: 3 | RNVC: 2
C 5791 515 CD: RNCC: 5 | RNVC: 2
C5791515CD: RNCC: 5 | RNVC: 2
C5791515CD: RNCC: 5 | RNVC: 2
C 5791 515 CD: RNCC: 5 | RNVC: 2

3 May 1983

5120-12-384-7560
Blacksmith's Vise

123847560
51.000.001: RNCC: 3 | RNVC: 2
51.000.001: RNCC: 5 | RNVC: 2

25 Mar 2011

5120-12-389-0324
Mounting Sleeve

123890324
320 000 70: RNCC: 3 | RNVC: 2
80.99606-0489: RNCC: 5 | RNVC: 2
80996060489: RNCC: 5 | RNVC: 2

21 May 2012

5120-12-151-5888
Electronic Equipment Alignment Tool

121515888
5800427-0040-000: RNCC: 3 | RNVC: 2
5800427-0040-000: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-368-8653
Hand Terminal Crimping Tool

123688653
97 71 180: RNCC: 3 | RNVC: 2
00.16.83.34: RNCC: 5 | RNVC: 2
4003773-019787: RNCC: 5 | RNVC: 2

2 May 2006

5120-12-351-9585
Socket Head Screw Key

123519585
ISO2936-5L: RNCC: 2 | RNVC: 2

20 Sep 2000

5120-12-158-9745
Electronic Equipment Alignment Tool

121589745
700-14L: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-390-1490
Mechanical Puller Set

123901490
062822: RNCC: 3 | RNVC: 2

10 Oct 2012

5120-12-127-8791
Hand Hammer

121278791
22: RNCC: 3 | RNVC: 2
22: RNCC: 3 | RNVC: 9
22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-141-6644
Hand Tube Bender

121416644
636D502B3-8IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-133-3040

5120-12-377-1154
Quick Adjusting Screw Clamp

123771154
SGL40M: RNCC: 3 | RNVC: 2

11 Dec 2008

5120-12-309-6937
Drive Pin Punch

123096937
335927-9042.000: RNCC: 3 | RNVC: 2
6264.10-16: RNCC: 5 | RNVC: 2
33 59 27-9042.000: RNCC: 5 | RNVC: 9
335927-9042-000: RNCC: 5 | RNVC: 9
335927-9042.000: RNCC: 5 | RNVC: 9

17 Feb 1987

5120-12-334-0397
Hand Roller

123340397
3057: RNCC: 3 | RNVC: 2

14 Mar 1994

5120-12-334-2788
Screwdriver Bit

123342788
2321-3: RNCC: 3 | RNVC: 2
3676140002: RNCC: 5 | RNVC: 2

21 Apr 1994

5120-12-378-2700
Mechanical Puller Attachment

123782700
2-153-P: RNCC: 3 | RNVC: 2

24 Mar 2009

5120-12-317-0377
Socket Head Screw Key

123170377
1997LM4-5: RNCC: 3 | RNVC: 2
130215: RNCC: 5 | RNVC: 2

7 Mar 1989

5120-12-197-0006
Socket Wrench Adapter

121970006
50090802: RNCC: 3 | RNVC: 2
50090802: RNCC: 5 | RNVC: 9
50090802: RNCC: 5 | RNVC: 9

25 Mar 1986

5120-12-384-7377
Blacksmiths' Tongs

123847377
51.000.020: RNCC: 3 | RNVC: 2
51.000.020: RNCC: 5 | RNVC: 2

24 Mar 2011

5120-12-364-4635
Bearing And Bushing Inserter

123644635
200 890 009: RNCC: 3 | RNVC: 2

29 Sep 2004

5120-12-139-2529
Kurbelwe Drehkreuz

121392529
034M00800: RNCC: 3 | RNVC: 2
VM76368: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5576
Schluessel

121235576
301062: RNCC: 3 | RNVC: 2
301036: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-5777
Socket Wrench Screwdriver Attachment

123885777
001.859: RNCC: 3 | RNVC: 2

2 Apr 2012

5120-12-191-1884
Gegenhalter

121911884
1X56136967: RNCC: 3 | RNVC: 2

18 Jan 1982

5120-12-132-1091
Spanner Wrench

121321091
499202-3170: RNCC: 3 | RNVC: 2
499202-3170: RNCC: 5 | RNVC: 2
499202-3170: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-3601
Torque Wrench Adapter

123883601
6450D-41: RNCC: 3 | RNVC: 2

14 Mar 2012

5120-12-157-6783
Kabelschuh Stempel

121576783
N25-35WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-191-0673
Oese

121910673
365 0006: RNCC: 3 | RNVC: 2
365 0006-000-00.4: RNCC: 3 | RNVC: 2
3650006: RNCC: 5 | RNVC: 9

11 Jan 1982

5120-12-168-4369
Spanner Wrench

121684369
NO PRIMARY REF 12-168-4369: RNCC: 3 | RNVC: 2
12746-903-00: RNCC: 5 | RNVC: 9

10 Mar 1977

5120-12-382-9718
Mechanical Puller

123829718
SC-995: RNCC: 3 | RNVC: 2

30 Aug 2010

5120-12-174-7242
Hand Terminal Crimping Tool

121747242
K18: RNCC: 3 | RNVC: 9

25 Jul 1978

5120-12-348-6469
Abstimmwerkzeugsatz

123486469
1-200: RNCC: 3 | RNVC: 2

29 Jul 1999

5120-12-360-0131
E Auszieher Griff

123600131
VG95236T04C0001: RNCC: 2 | RNVC: 2

27 Mar 2003

5120-12-387-2668
Socket Wrench

123872668
200.095: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-12-344-1362
Schluessel

123441362
402.0390.00099: RNCC: 3 | RNVC: 2
12606380581: RNCC: 5 | RNVC: 2

17 Sep 1997

5120-12-129-6145
Spanner Wrench Set

121296145
6179674: RNCC: 3 | RNVC: 2
1102897: RNCC: 3 | RNVC: 2
6179674: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-362-4430
Craftsman's Tweezers

123624430
T2359: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-12-196-7400
Ratchet Wrench

121967400
29344: RNCC: 3 | RNVC: 2
2350-12-28: RNCC: 5 | RNVC: 2
2350-12MITEINSATZ 28MM: RNCC: 5 | RNVC: 2

9 Aug 1983

5120-12-126-6499
Communications Equipment Spring Adjuster

121266499
NO PRIMARY REF 12-126-6499: RNCC: 3 | RNVC: 2
108408: RNCC: 5 | RNVC: 9
5400C: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-5365
Spanner Wrench

121715365
1238-01.6W11: RNCC: 3 | RNVC: 2
335929-9007.000: RNCC: 5 | RNVC: 2
1238-01-6W11: RNCC: 5 | RNVC: 2
1238-01-6W11: RNCC: 5 | RNVC: 9
1238-01.6W11: RNCC: 5 | RNVC: 9

21 Oct 1977

5120-12-123-5121
Open End Wrench

121235121
FS1976001001: RNCC: 3 | RNVC: 9
224898: RNCC: 5 | RNVC: 9
6-1112: RNCC: 5 | RNVC: 9
6-11X12: RNCC: 5 | RNVC: 9
6-11X12: RNCC: 5 | RNVC: 9
450-11X12: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-1917
Einstellvorrichtung

121471917
23176-264050-00-0: RNCC: 2 | RNVC: 2
23176-264050.00.0: RNCC: 2 | RNVC: 2
23176-264050-00-0: RNCC: 5 | RNVC: 2
23176-264050.00.0: RNCC: 5 | RNVC: 2
23176-264050-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-315-3878
Face Spanner Wrench Socket

123153878
503651: RNCC: 3 | RNVC: 2

19 Oct 1988

5120-12-153-9342
Schluessel

121539342
40X23VG95239: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-195-1438
Bearing And Bushing Inserter

121951438
7428798053: RNCC: 3 | RNVC: 2
7428798053: RNCC: 5 | RNVC: 9

17 Jan 1983

5120-12-332-6130
Spanner Wrench

123326130
532113-8122.902: RNCC: 3 | RNVC: 2
532113-8122.902: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-372-4010
Hand Hammer

123724010
1660-60: RNCC: 3 | RNVC: 2

13 Jul 2007

5120-12-392-7524
Box Wrench

123927524
SEWZG025: RNCC: 3 | RNVC: 2

4 Jul 2013

5120-12-129-9517
Socket Wrench

121299517
DIN904-10: RNCC: 2 | RNVC: 2
51701: RNCC: 3 | RNVC: 2
51701: RNCC: 3 | RNVC: 2
1170-10: RNCC: 3 | RNVC: 2
10DIN904: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-195-1012
Socket Head Screw Key

121951012
1997LZ1-16: RNCC: 3 | RNVC: 2
105904: RNCC: 5 | RNVC: 2

13 Jan 1983

5120-12-357-7541
Ru Montierwerkzeug

123577541
RD99-00-013000: RNCC: 3 | RNVC: 2

19 Jul 2002

5120-12-343-8660
Pipe Wrench

123438660
1320-12: RNCC: 3 | RNVC: 2
01320001221: RNCC: 5 | RNVC: 2

7 Aug 1997

5120-12-347-8596
Open End Wrench

123478596
450N-21X22: RNCC: 3 | RNVC: 9

24 Feb 1999

5120-12-326-0070
Mechanical Puller Attachment

123260070
2500194-992460.001.0: RNCC: 2 | RNVC: 2
2500194-992460.001.0: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-362-9107
K Einstellwerkzeug

123629107
3313: RNCC: 3 | RNVC: 2

14 Apr 2004

5120-12-383-6825
Pull And Press Tool

123836825
1X56.095.063: RNCC: 3 | RNVC: 2

24 Nov 2010

5120-12-337-8495
Craftsman's Tweezers

123378495
T2334: RNCC: 3 | RNVC: 2
2334: RNCC: 5 | RNVC: 9

24 Apr 1995

5120-12-193-4862
Bearing And Bushing Inserter

121934862
460589071500: RNCC: 3 | RNVC: 2

27 Jul 1982

5120-12-092-2264

5120-12-181-6571
Mechanical Puller Attachment

121816571
23290-268110.001: RNCC: 2 | RNVC: 2
23290-268110.001: RNCC: 3 | RNVC: 2
23290-268110-001: RNCC: 5 | RNVC: 9
23290-268110.001: RNCC: 5 | RNVC: 9

10 Dec 1979

5120-12-301-4554
Fixed Open End Wrench Set

123014554
NO PRIMARY REF 12-301-4554: RNCC: 3 | RNVC: 2
1931N-M5T: RNCC: 5 | RNVC: 9

16 Oct 1984

5120-12-313-0010
Einstel Schluessel

123130010
83.09195-0002: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-12-362-5493
Pliers

123625493
611 589 00 37 00: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-12-311-9678
Hand Scissors Jack

123119678
191011031A: RNCC: 3 | RNVC: 2
G514: RNCC: 3 | RNVC: 2

5 Nov 1987

5120-12-330-5531
Stud Inserter

123305531
0851 0472: RNCC: 3 | RNVC: 2
8510472: RNCC: 5 | RNVC: 2

8 Jan 1993

5120-12-050-0825

5120-12-326-5304
Face Spanner Wrench Socket

123265304
4900345: RNCC: 3 | RNVC: 2
3-4900345: RNCC: 5 | RNVC: 2
4900345: RNCC: 5 | RNVC: 9

1 Oct 1991

5120-12-352-8075
Drive Pin Punch

123528075
4475890115/00: RNCC: 3 | RNVC: 2

18 Dec 2000

5120-12-700-4445
Socket Wrench Extension

127004445
51-084322094: RNCC: 2 | RNVC: 2
765.93.146: RNCC: 5 | RNVC: 9

10 Jun 1992

5120-12-320-2975
Socket Head Screw Key

123202975
TL5120-0132-I10: RNCC: 2 | RNVC: 2
2115-T30: RNCC: 3 | RNVC: 2
10766-T30: RNCC: 3 | RNVC: 2
71112328872: RNCC: 5 | RNVC: 2
3933130010: RNCC: 5 | RNVC: 2
43220030: RNCC: 5 | RNVC: 2
71112328872: RNCC: 5 | RNVC: 2
4635810017: RNCC: 5 | RNVC: 2

29 Dec 1989

5120-12-170-8011
Socket Head Screw Key

121708011
5100069-007000: RNCC: 3 | RNVC: 2
5100069-007000: RNCC: 5 | RNVC: 2
110212U: RNCC: 5 | RNVC: 9

11 Aug 1977

5120-12-044-4912

5120-12-365-9448
Swivel Knob Jeweler's Screwdriver Set

123659448
T4884X ESD: RNCC: 3 | RNVC: 2

21 Feb 2005

5120-12-181-7738
Combination Box And Open End Wrench

121817738
14-6: RNCC: 3 | RNVC: 2

14 Dec 1979

5120-12-371-3643
Socket Wrench Screwdriver Attachment

123713643
3510-IN 4: RNCC: 3 | RNVC: 2
00.47.17.61: RNCC: 5 | RNVC: 2

20 Mar 2007

5120-12-306-0069
Drain Plug Wrench

123060069
2760: RNCC: 3 | RNVC: 2
4412-1: RNCC: 3 | RNVC: 2
5714640003: RNCC: 5 | RNVC: 2
04412141780: RNCC: 5 | RNVC: 2
441214178: RNCC: 5 | RNVC: 2

20 Jan 1986

5120-12-382-8522
Torch And Regulator Wrench

123828522
3.5530: RNCC: 3 | RNVC: 2

16 Aug 2010

5120-12-374-3709
Socket Wrench Extension

123743709
13010007-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-351-4246
Face Spanner Wrench Socket

123514246
9255304000: RNCC: 3 | RNVC: 2

25 Jul 2000

5120-12-123-5567

5120-12-123-5501
Socket Wrench

121235501
33-9/32: RNCC: 3 | RNVC: 2
541-9/32: RNCC: 3 | RNVC: 2
4510106: RNCC: 3 | RNVC: 2
12500A-9/32: RNCC: 3 | RNVC: 2
00541 631483: RNCC: 5 | RNVC: 2
635 685: RNCC: 5 | RNVC: 2
590-9-32: RNCC: 5 | RNVC: 9
134584: RNCC: 5 | RNVC: 9
1945NBZ9-32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-5354
Socket Wrench Socket

123125354
123 589-08 09 00: RNCC: 3 | RNVC: 2
123589080900: RNCC: 5 | RNVC: 2

15 Jan 1988

5120-12-142-0292
Torque Wrench

121420292
TER602FUA: RNCC: 3 | RNVC: 2
131278: RNCC: 5 | RNVC: 9
154555: RNCC: 5 | RNVC: 9
8976: RNCC: 5 | RNVC: 9
8976N: RNCC: 5 | RNVC: 9
5120-40532: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-391-7062
Socket Wrench Screwdriver Attachment

123917062
986KK-12: RNCC: 3 | RNVC: 2
4000896052141: RNCC: 5 | RNVC: 2

27 Mar 2013

5120-12-195-5128
Face Spanner Wrench Socket

121955128
22-310-1Y-03: RNCC: 3 | RNVC: 2

7 Mar 1983

5120-12-388-0553
Crimping Tool Die

123880553
1187-07101: RNCC: 3 | RNVC: 2
80.99625-0108: RNCC: 5 | RNVC: 2
80996250108: RNCC: 5 | RNVC: 2

22 Feb 2012

Load More Results