What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 23 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 23 of 62

5120-12-139-3110
Drive Pin Punch

121393110
0005894143: RNCC: 3 | RNVC: 2
016M12000: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-335-4089
Mechanical Puller

123354089
0851 7200: RNCC: 3 | RNVC: 2
8517200: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-194-2426

5120-12-148-5918
Socket Wrench

121485918
K65031: RNCC: 3 | RNVC: 2
K65031: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-137-4186

5120-12-374-3760
Ratchet Wrench

123743760
41131719-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-141-0396
Schluessel

121410396
3215890011: RNCC: 3 | RNVC: 2
321589001100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-133-4571

5120-12-140-2585
Hole Sheet Metal Holder

121402585
2071S48: RNCC: 3 | RNVC: 2
2072KU48: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-149-6887

5120-12-374-3664
Box Wrench

123743664
41041011-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-163-0530
Dichtr Schutzhuelse

121630530
142110: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-176-1333
Socket Head Screw Key

121761333
C1997M11: RNCC: 3 | RNVC: 2
148571: RNCC: 5 | RNVC: 2
C1997M11MM: RNCC: 6 | RNVC: 9

9 Nov 1978

5120-12-310-2029
Spanner Wrench

123102029
962 251: RNCC: 3 | RNVC: 2
330024: RNCC: 5 | RNVC: 2

16 Apr 1987

5120-12-133-4645

5120-12-133-5964
Jaw Cable Grip

121335964
2913: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-380-5140
Socket Wrench Socket

123805140
1878256887: RNCC: 3 | RNVC: 2

4 Nov 2009

5120-12-381-9819
Mechanical Puller

123819819
104300: RNCC: 3 | RNVC: 2

23 Apr 2010

5120-12-365-4794
Pliers

123654794
T3770D 120: RNCC: 3 | RNVC: 2

7 Jan 2005

5120-12-360-8021
Montage- Hebel

123608021
2P-MHL: RNCC: 3 | RNVC: 2

11 Jul 2003

5120-12-366-8627
Socket Wrench Crowfoot Attachment

123668627
440MJ16: RNCC: 3 | RNVC: 2
02210016: RNCC: 5 | RNVC: 2
02210016: RNCC: 5 | RNVC: 2

16 Jun 2005

5120-12-368-2538
Combination Box And Open End Wrench

123682538
40482222-TCS: RNCC: 3 | RNVC: 2

17 Jan 2006

5120-12-091-9909

5120-12-357-9016
Hand Shovel

123579016
EXPERT II: RNCC: 3 | RNVC: 2

12 Aug 2002

5120-12-370-5494
Craftsman's Tweezers

123705494
922761: RNCC: 3 | RNVC: 2
00.19.01.58: RNCC: 5 | RNVC: 2
4003773054757: RNCC: 5 | RNVC: 2

21 Nov 2006

5120-12-357-7257
Seal Inserter

123577257
9220074000: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-093-7701

5120-12-368-1006
Swivel Knob Jeweler's Screwdriver

123681006
47520001-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-134-9231

5120-12-369-3286
Eindrueckwerkzeug

123693286
80996040220: RNCC: 3 | RNVC: 2
80.99604-0220: RNCC: 5 | RNVC: 2

22 Jun 2006

5120-12-135-6257
Zuggerae Drahtseil

121356257
803-004: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-356-2187
Bearing And Bushing Inserter

123562187
J53233750-001W5700-01: RNCC: 3 | RNVC: 2

4 Feb 2002

5120-12-388-6229
Socket Wrench Socket

123886229
880LG-20: RNCC: 3 | RNVC: 2
4000896040810: RNCC: 5 | RNVC: 2

4 Apr 2012

5120-12-369-0346
Box Wrench

123690346
TL5120-0078-145: RNCC: 2 | RNVC: 2
DIN837-B21X24: RNCC: 5 | RNVC: 1

16 May 2006

5120-12-312-3272
Werkst Druckstueck

123123272
VW4471: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-12-311-7414
Mechanical Puller

123117414
389 589 00 43 00: RNCC: 3 | RNVC: 2
389589004300: RNCC: 5 | RNVC: 2

13 Oct 1987

5120-12-126-3036

5120-12-129-2380

5120-12-365-4792
Retaining Ring Pliers

123654792
T3716: RNCC: 3 | RNVC: 2

7 Jan 2005

5120-12-363-8866
Bearing And Bushing Inserter

123638866
T670P5001235: RNCC: 3 | RNVC: 2

3 Aug 2004

5120-12-382-8673
Retaining Ring Pliers

123828673
65454003-TCS: RNCC: 3 | RNVC: 2

18 Aug 2010

5120-12-381-7695
Bracing Device

123817695
775 412: RNCC: 3 | RNVC: 2

29 Mar 2010

5120-12-368-9521
Slip Joint Pliers

123689521
88 05 300: RNCC: 3 | RNVC: 2
00.13.05.44: RNCC: 5 | RNVC: 2

9 May 2006

5120-12-156-3114
Open End Wrench

121563114
149120608: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-382-6038
Mecha Ejector Tool

123826038
41285180: RNCC: 3 | RNVC: 2

15 Jul 2010

5120-12-385-3336
Mecha Fitting Tool

123853336
60.00.41: RNCC: 3 | RNVC: 2

24 May 2011

5120-12-123-5936
Socket Wrench Crowfoot Attachment

121235936
1950Z1: RNCC: 3 | RNVC: 2
440A-1: RNCC: 3 | RNVC: 2
105612: RNCC: 5 | RNVC: 2
02490048: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-370-9973
Flat Tip Screwdriver

123709973
4-311: RNCC: 3 | RNVC: 2

24 Jan 2007

5120-12-368-8933
Rohr- Zange

123688933
136-360: RNCC: 3 | RNVC: 2
00.13.40.79: RNCC: 5 | RNVC: 2

4 May 2006

5120-12-374-3999
Socket Wrench Adapter

123743999
96121002-TCS: RNCC: 3 | RNVC: 2

13 Feb 2008

5120-12-343-7347
Cross Tip Screwdriver

123437347
512 405 40: RNCC: 3 | RNVC: 2

18 Jul 1997

5120-12-355-3827
Schraubendrehersatz

123553827
9710/S6: RNCC: 3 | RNVC: 2
1802301: RNCC: 5 | RNVC: 2

9 Nov 2001

5120-12-364-4633
Bearing And Bushing Inserter

123644633
200 890 010: RNCC: 3 | RNVC: 2

29 Sep 2004

5120-12-133-2350

5120-12-024-4802

5120-12-328-4518
Elektron Auszieher

123284518
07L1015: RNCC: 3 | RNVC: 2

21 May 1992

5120-12-387-6849
Installation And Re

123876849
F6553644: RNCC: 3 | RNVC: 2

24 Jan 2012

5120-12-120-5632
Socket Wrench

121205632
11018902000: RNCC: 3 | RNVC: 2
180U02: RNCC: 5 | RNVC: 2
75A: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-320-5629
Hammer Handle

123205629
3244030: RNCC: 3 | RNVC: 2

26 Jan 1990

5120-12-333-6642
Wrench Kit

123336642
637.3867.00: RNCC: 3 | RNVC: 2

19 Jan 1994

5120-12-199-7021
Hand Hydraulic Jack

121997021
NO PRIMARY REF 12-199-7021: RNCC: 3 | RNVC: 2
ADX6-370: RNCC: 5 | RNVC: 2
HUD6-370: RNCC: 5 | RNVC: 2
0015831215: RNCC: 5 | RNVC: 2
13527.5: RNCC: 5 | RNVC: 2
305363.6: RNCC: 5 | RNVC: 2
0005839115: RNCC: 5 | RNVC: 9
14218.2: RNCC: 5 | RNVC: 9

24 May 1984

5120-12-194-0820
Torque Wrench Adapter

121940820
TL5120-0086-170: RNCC: 2 | RNVC: 2
20/DC-9/16: RNCC: 5 | RNVC: 9
731A/10 9/16: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-374-3744
Combination Box And Open End Wrench

123743744
40084141-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-335-5162
Open End Wrench

123355162
073-140110-902-0: RNCC: 2 | RNVC: 2
073-140110-902-0: RNCC: 3 | RNVC: 2

25 Aug 1994

5120-12-369-8066
Socket Wrench Socket

123698066
135822: RNCC: 3 | RNVC: 2
0110606420000: RNCC: 5 | RNVC: 2

17 Aug 2006

5120-12-330-4329
Mechanical Puller Attachment

123304329
5187084: RNCC: 3 | RNVC: 2

12 Dec 1992

5120-12-305-4891
Retaining Ring Pliers

123054891
360589013700: RNCC: 3 | RNVC: 2

13 Nov 1985

5120-12-336-5066
Seal Inserter And Remover

123365066
0852 2457: RNCC: 3 | RNVC: 2
8522457: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-357-7256
Seal Inserter

123577256
9249994000: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-317-6022
Pin Inserter

123176022
530014: RNCC: 2 | RNVC: 9

20 Apr 1989

5120-12-120-6615

5120-12-130-6770

5120-12-150-4287
Mechanical Puller

121504287
837589063300: RNCC: 3 | RNVC: 2
8375890633: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-184-4594
Schluessel

121844594
66286-400: RNCC: 3 | RNVC: 2

24 Jul 1980

5120-12-332-7218
Mechanical Puller Forcing Screw

123327218
25704-360276.00.0: RNCC: 2 | RNVC: 2
1000099-360210.01.0: RNCC: 2 | RNVC: 2
25704-360276.00.0: RNCC: 3 | RNVC: 2

10 Sep 1993

5120-12-381-5443
Socket Wrench Socket

123815443
40ADV-9/32: RNCC: 3 | RNVC: 2
01650018: RNCC: 5 | RNVC: 2

2 Mar 2010

5120-12-178-3277
Open End Wrench

121783277
6-5/8X3/4W: RNCC: 3 | RNVC: 2
TVA5120-2-263-028: RNCC: 5 | RNVC: 1
TVA5120-2-263-028-1.1.38: RNCC: 5 | RNVC: 2
03760: RNCC: 5 | RNVC: 9
450W2024: RNCC: 5 | RNVC: 9
450WV5-8X3-4: RNCC: 5 | RNVC: 9
10E5/8X3/4: RNCC: 5 | RNVC: 9
40733640: RNCC: 5 | RNVC: 9
10E11/16X7/8: RNCC: 5 | RNVC: 9
10E11/16X7/8BS: RNCC: 5 | RNVC: 9

12 Apr 1979

5120-12-363-0107
Spanner Wrench

123630107
170090: RNCC: 3 | RNVC: 2
030-1224: RNCC: 5 | RNVC: 2

24 Apr 2004

5120-12-365-7823
Craftsman's Tweezers

123657823
T2315A: RNCC: 3 | RNVC: 2

2 Feb 2005

5120-12-134-2676
Dorn

121342676
016M08900: RNCC: 3 | RNVC: 2
VM76385: RNCC: 5 | RNVC: 2
VM76385: RNCC: 5 | RNVC: 2
VM76385: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-180-0999
Ausbauwerkzeug

121800999
01TC30081: RNCC: 3 | RNVC: 2
MAGERD 4400: RNCC: 5 | RNVC: 9

20 Aug 1979

5120-12-120-5763
Hand Screw Jack

121205763
23092: RNCC: 3 | RNVC: 2
EL20: RNCC: 3 | RNVC: 2
0005834115: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-178-3269
Socket Wrench

121783269
1936M30X32: RNCC: 3 | RNVC: 2
105150: RNCC: 5 | RNVC: 2

12 Apr 1979

5120-12-121-6896

5120-12-121-5930
Richt- Platte

121215930
RM400X400: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-330-1224
Drive Pin Punch Set

123301224
34223260: RNCC: 3 | RNVC: 2
34223260: RNCC: 5 | RNVC: 2

5 Nov 1992

5120-12-199-5067
Face Spanner Wrench Socket

121995067
839589060800: RNCC: 3 | RNVC: 2

4 May 1984

5120-12-192-5869
Spanner Wrench

121925869
30MS022: RNCC: 3 | RNVC: 2

6 May 1982

5120-12-333-5839
Torque Wrench

123335839
016060: RNCC: 3 | RNVC: 2

7 Jan 1994

5120-12-387-5249
Hand Screw Jack

123875249
2801063: RNCC: 3 | RNVC: 2

5 Jan 2012

5120-12-172-0917
Flat Tip Screwdriver

121720917
5550-4-5: RNCC: 3 | RNVC: 2
147575: RNCC: 5 | RNVC: 2

19 Dec 1977

5120-12-189-3449
Gewindedorn

121893449
30/6: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-12-188-5912
Gewindedorn

121885912
053470 E: RNCC: 3 | RNVC: 2

20 Jul 1981

5120-12-343-8166
Socket Wrench Set

123438166
TL5120-0054: RNCC: 2 | RNVC: 2
TK-KG12-5120-684: RNCC: 5 | RNVC: 9
TK5120-010: RNCC: 5 | RNVC: 9
5120-01046: RNCC: 6 | RNVC: 9

31 Jul 1997

5120-12-179-5014
Chain Type Ratchet Lever Puller

121795014
0831018: RNCC: 3 | RNVC: 2

2 Jul 1979

5120-12-350-7893
Drive Pin Punch Set

123507893
3658A/6: RNCC: 3 | RNVC: 2
1075354: RNCC: 5 | RNVC: 2

22 May 2000

5120-12-360-9414
Socket Wrench Screwdriver Attachment Set

123609414
986/9: RNCC: 3 | RNVC: 2

25 Jul 2003

5120-12-177-4828
Tool Handle Wedge

121774828
6798-4: RNCC: 3 | RNVC: 9
3575-2: RNCC: 5 | RNVC: 9

1 Feb 1979

5120-12-026-2039

5120-12-351-9592

5120-12-358-3634
Ratchet Wrench

123583634
71425117: RNCC: 3 | RNVC: 2

14 Oct 2002

5120-12-375-9616
Socket Head Screw Key

123759616
349312: RNCC: 3 | RNVC: 2

24 Jul 2008

5120-12-378-7487
Mounting Sleeve

123787487
652606: RNCC: 3 | RNVC: 2

8 May 2009

5120-12-126-1824

5120-12-363-8716
Bearing And Bushing Inserter And Remover

123638716
T670P5001209: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-316-5267
Spanner Wrench

123165267
G004/111500: RNCC: 3 | RNVC: 2
G004/111500: RNCC: 5 | RNVC: 9

23 Jan 1989

5120-12-341-3972
Spanner Wrench

123413972
80996060231: RNCC: 3 | RNVC: 2
80.99606-0231: RNCC: 5 | RNVC: 2

30 Aug 1996

5120-12-343-6801
Swivel Knob Jeweler's Screwdriver

123436801
240 043 90: RNCC: 3 | RNVC: 2

14 Jul 1997

5120-12-070-0202

5120-12-319-4365
Mechanical Puller Step Plate

123194365
99345055: RNCC: 3 | RNVC: 2

2 Oct 1989

5120-12-023-2574

5120-12-314-1131
Box Wrench

123141131
4201016: RNCC: 3 | RNVC: 2

8 Jun 1988

5120-12-380-1172
Swivel Knob Jeweler's Screwdriver

123801172
T4882X0ESD: RNCC: 3 | RNVC: 2

29 Sep 2009

5120-12-365-7600
Socket Wrench Extension

123657600
11040000-TCS: RNCC: 3 | RNVC: 2

1 Feb 2005

5120-12-369-7256
Seal Inserter

123697256
142670: RNCC: 3 | RNVC: 2
142670: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-158-9754
Electronic Equipment Alignment Tool

121589754
770D: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-363-2373
Socket Wrench

123632373
F30377661: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-021-6825

5120-12-130-3471

5120-12-370-1875
Pipe Wrench

123701875
2171-5: RNCC: 3 | RNVC: 2
HAZET 2171-5: RNCC: 5 | RNVC: 2

28 Sep 2006

5120-12-348-2842
Screwdriver Bit

123482842
05002970001: RNCC: 3 | RNVC: 2
87-TX10-TX15: RNCC: 5 | RNVC: 2
002970: RNCC: 5 | RNVC: 9

25 May 1999

5120-12-140-9567
Schluessel

121409567
RP312-11: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-196-9824
Screw Thread Insert Inserter

121969824
01500204000: RNCC: 3 | RNVC: 2

7 Sep 1983

5120-12-328-6476
Preformed Packing Inserter

123286476
KDEP2869: RNCC: 3 | RNVC: 2
F30371304: RNCC: 5 | RNVC: 2
F361210371304: RNCC: 5 | RNVC: 2

11 Jun 1992

5120-12-166-1960
Hebevorrichtung

121661960
1X56136563: RNCC: 3 | RNVC: 2
8470236: RNCC: 5 | RNVC: 2
8207707: RNCC: 5 | RNVC: 2

12 Aug 1976

5120-12-351-9376
Mechanical Puller Attachment

123519376
CBD45308P03: RNCC: 3 | RNVC: 2

19 Sep 2000

5120-12-324-4521
Hand Beading Tool

123244521
VN210-4: RNCC: 3 | RNVC: 2
NV1-030749-4: RNCC: 5 | RNVC: 2

18 Feb 1991

5120-12-306-3527
Drive Pin Punch

123063527
5072698: RNCC: 3 | RNVC: 2

24 Feb 1986

5120-12-336-5092
Bearing And Bushing Inserter

123365092
0851 5127: RNCC: 3 | RNVC: 2
8515127: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-150-9083
Elektron Auszieher

121509083
AWN187A1: RNCC: 3 | RNVC: 2
AWN187A1: RNCC: 3 | RNVC: 2
A1AWN187: RNCC: 5 | RNVC: 2
A1AWN187: RNCC: 5 | RNVC: 2
A1AWN187: RNCC: 5 | RNVC: 9
AWN187A1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-3773
Korr Fuehrungsdorn

121293773
3155890131: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-177-5039
Spanner Wrench

121775039
700503-9002W4: RNCC: 3 | RNVC: 2
700503-9002W4: RNCC: 5 | RNVC: 9

5 Feb 1979

5120-12-192-7708
Open End Wrench

121927708
2769: RNCC: 3 | RNVC: 2
615589000100: RNCC: 5 | RNVC: 2
5711620002: RNCC: 5 | RNVC: 2

24 May 1982

5120-12-020-7829

5120-12-370-3724
Socket Wrench Adapter

123703724
70V-12: RNCC: 3 | RNVC: 2
59010015: RNCC: 5 | RNVC: 2

30 Oct 2006

5120-12-371-0834
Socket Wrench

123710834
25V8: RNCC: 3 | RNVC: 2
6194770: RNCC: 5 | RNVC: 2

7 Feb 2007

5120-12-389-3333
Torque Screwdriver

123893333
05074733001: RNCC: 3 | RNVC: 2
7445ESD: RNCC: 5 | RNVC: 2

21 Jun 2012

5120-12-143-9458
Ausziehba Handhebel

121439458
001-493: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5057

5120-12-317-0375
Flat Tip Screwdriver Set

123170375
8000/5: RNCC: 3 | RNVC: 2
131844: RNCC: 5 | RNVC: 2

7 Mar 1989

5120-12-389-2786
Mechanical Puller Step Plate

123892786
201589056300: RNCC: 3 | RNVC: 2
201589056300: RNCC: 5 | RNVC: 2

15 Jun 2012

5120-12-130-3297
Flat Tip Screwdriver

121303297
16813: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-363-9045
Bearing And Bushing Inserter And Remover

123639045
T670P5001257: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-140-4246

5120-12-144-4381
Schluessel

121444381
EN060-17: RNCC: 3 | RNVC: 2
52-0001-230-04: RNCC: 3 | RNVC: 2
52-0001-000-00: RNCC: 5 | RNVC: 9
520001-230-04: RNCC: 5 | RNVC: 9
EN060-17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-1656
Cross Tip Screwdriver

121561656
M257-13: RNCC: 3 | RNVC: 2
M257-13: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-6696
Socket Wrench Crowfoot Attachment

121906696
6008R-1300.01.0: RNCC: 2 | RNVC: 2
6008R-1300.01.0: RNCC: 3 | RNVC: 2
6008R-1300.01.0: RNCC: 5 | RNVC: 2
6008R-1300.01.0: RNCC: 5 | RNVC: 9

8 Dec 1981

5120-12-368-9869
Socket Wrench Screwdriver Attachment

123689869
3243-TX 30: RNCC: 3 | RNVC: 2
00.45.23.61: RNCC: 5 | RNVC: 2

10 May 2006

5120-12-313-0529
Hydraulisc Adapter

123130529
19862: RNCC: 3 | RNVC: 2

1 Mar 1988

5120-12-307-9650
Socket Wrench Socket

123079650
130207: RNCC: 3 | RNVC: 2
9291386200: RNCC: 5 | RNVC: 2

14 Aug 1986

5120-12-348-6894
Flat Tip Screwdriver

123486894
957305: RNCC: 3 | RNVC: 2

5 Aug 1999

5120-12-330-3648
Bearing And Bushing Inserter Set

123303648
2653-990980.00: RNCC: 2 | RNVC: 2
2653-990980.00: RNCC: 3 | RNVC: 2

8 Dec 1992

5120-12-304-5222
Socket Wrench Handle

123045222
517: RNCC: 3 | RNVC: 2
13260001: RNCC: 5 | RNVC: 2
2635870007: RNCC: 5 | RNVC: 9
916G: RNCC: 5 | RNVC: 9
538: RNCC: 5 | RNVC: 9
13200001: RNCC: 5 | RNVC: 9

26 Jul 1985

5120-12-192-9989
Mechanical Puller

121929989
116589203300: RNCC: 3 | RNVC: 2

11 Jun 1982

5120-12-191-8736
Bearing And Bushing Inserter

121918736
66641800: RNCC: 3 | RNVC: 2
E671-M12: RNCC: 5 | RNVC: 2

15 Mar 1982

5120-12-176-6772
Mechanical Puller

121766772
406589053300: RNCC: 3 | RNVC: 2
128-3DB: RNCC: 5 | RNVC: 2

13 Dec 1978

5120-12-305-2551
Socket Head Screw Key

123052551
GAW1612: RNCC: 3 | RNVC: 2
334-68: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-308-9792
Pliers

123089792
33006.74: RNCC: 3 | RNVC: 2

3 Dec 1986

5120-12-070-0186

5120-12-702-8589
Flat Tip Screwdriver

127028589
50-67800930055: RNCC: 3 | RNVC: 2

5 Jan 1996

5120-12-370-7253
Driftpin

123707253
3282/40: RNCC: 3 | RNVC: 2

14 Dec 2006

5120-12-199-0779

5120-12-369-6998
Screw Extractor Set

123696998
4.606.4: RNCC: 3 | RNVC: 2
262 000 3: RNCC: 3 | RNVC: 2
01.42.51.89: RNCC: 5 | RNVC: 2

9 Aug 2006

5120-12-354-1560
Swivel Knob Jeweler's Screwdriver Set

123541560
4797: RNCC: 3 | RNVC: 2
96479710: RNCC: 5 | RNVC: 2

12 Jun 2001

5120-12-149-6897

5120-12-356-8115
Driftpin

123568115
29208: RNCC: 3 | RNVC: 2

8 Apr 2002

5120-12-311-1654
Hand Storage Battery Carrier

123111654
190: RNCC: 3 | RNVC: 2

3 Aug 1987

5120-12-135-0271
Zeiger Abheber

121350271
4263101: RNCC: 3 | RNVC: 2
3624: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-157-9817
Montier- Dorn

121579817
1X56103776: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-306-9623
Hydraulisc Adapter

123069623
3V751809: RNCC: 3 | RNVC: 2
V751809: RNCC: 5 | RNVC: 2

22 Apr 1986

5120-12-358-6267
Spanner Wrench

123586267
170070: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-12-372-0497
Socket Wrench Socket Set

123720497
1207: RNCC: 3 | RNVC: 2

14 Jun 2007

5120-12-375-3705
Socket Wrench Screwdriver Attachment Set

123753705
23100: RNCC: 3 | RNVC: 2

26 May 2008

5120-12-193-6668

5120-12-092-1439

5120-12-344-1137
Mechanical Puller Attachment

123441137
0852 0260: RNCC: 3 | RNVC: 2
8520260: RNCC: 5 | RNVC: 2

15 Sep 1997

5120-12-140-2288

5120-12-147-1304
Schluessel

121471304
WZ50: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-390-4451
Torque Wrench

123904451
351212201811: RNCC: 3 | RNVC: 2

13 Nov 2012

5120-12-358-4054
Hand Terminal Crimping Tool

123584054
9743200: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-12-359-6144
Bearing And Bushing Inserter And Remover

123596144
T631P3004051: RNCC: 3 | RNVC: 2

21 Feb 2003

5120-12-364-6786
Socket Wrench Socket

123646786
03010014-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-331-9840
Combination Box And Open End Wrench

123319840
844602204: RNCC: 3 | RNVC: 2

13 Jul 1993

5120-12-120-9500
Open End Wrench

121209500
200-9X10: RNCC: 3 | RNVC: 2
895-9X10: RNCC: 3 | RNVC: 2
35-12-03: RNCC: 5 | RNVC: 2
9X10D1N895: RNCC: 5 | RNVC: 2
21C3754: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-345-9717
Torque Wrench Adapter

123459717
3015R-009130.000.0: RNCC: 2 | RNVC: 2
3015R-009130.000.0: RNCC: 3 | RNVC: 2

25 May 1998

5120-12-335-3704
Mechanical Puller Attachment

123353704
6427547: RNCC: 3 | RNVC: 2
6427547/4: RNCC: 5 | RNVC: 9
6427547/4: RNCC: 5 | RNVC: 9

15 Aug 1994

5120-12-123-5978
Socket Wrench Socket

121235978
NO PRIMARY REF 12-123-5978: RNCC: 3 | RNVC: 2
03440034: RNCC: 5 | RNVC: 9
53A9-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-356-8218
Craftsman's Tweezers

123568218
727570-AM: RNCC: 3 | RNVC: 2
71766-AM: RNCC: 5 | RNVC: 9

9 Apr 2002

5120-12-126-3054
Hand Hammer

121263054
574A005B225: RNCC: 3 | RNVC: 2
3500N-B-230: RNCC: 3 | RNVC: 2
6150-1-2: RNCC: 3 | RNVC: 2
5081030500: RNCC: 3 | RNVC: 2
7100002: RNCC: 3 | RNVC: 2
15220500: RNCC: 3 | RNVC: 2
5081-03 1-2LBS: RNCC: 5 | RNVC: 2
5081ES225: RNCC: 5 | RNVC: 2
N:1522-1/2LBS: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-2121
Brake Repair Pliers

123682121
135 13: RNCC: 3 | RNVC: 2
4010886640531: RNCC: 5 | RNVC: 2
6405300: RNCC: 5 | RNVC: 2

9 Jan 2006

5120-12-385-5552
Hand Tube Flaring Punch

123855552
F30276887: RNCC: 3 | RNVC: 2

15 Jun 2011

5120-12-153-5066
Montagestutzen

121535066
V0M06L: RNCC: 3 | RNVC: 2
909129401: RNCC: 5 | RNVC: 2
V0RM0NTAGESTUTZEN6L: RNCC: 5 | RNVC: 2
101734: RNCC: 5 | RNVC: 2
V0M06L: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-369-0336
Trowel

123690336
749 012 00: RNCC: 3 | RNVC: 2
02.33.64.84: RNCC: 5 | RNVC: 2

16 May 2006

5120-12-022-0311

5120-12-322-0332
Mechanical Puller

123220332
01TC33070: RNCC: 3 | RNVC: 2
MAGERD 4558: RNCC: 5 | RNVC: 9

19 Jul 1990

5120-12-364-6780
Craftsman's Tweezers

123646780
77510001-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-331-6211
Craftsman's Tweezers

123316211
5467: RNCC: 3 | RNVC: 2
108518: RNCC: 5 | RNVC: 2

1 Jun 1993

5120-12-324-5965
Seal Remover

123245965
2086: RNCC: 3 | RNVC: 2

4 Mar 1991

5120-12-368-1004
Swivel Knob Jeweler's Screwdriver

123681004
47520010-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-368-8753
Socket Wrench Socket

123688753
770-LTXE12: RNCC: 3 | RNVC: 2
00.50.43.96: RNCC: 5 | RNVC: 2

3 May 2006

5120-12-345-3071
Mechanical Puller

123453071
F0 096995: RNCC: 3 | RNVC: 2

2 Mar 1998

5120-12-126-2960

5120-12-120-7358

5120-12-091-4779

5120-12-337-9669
Lager- Und Einsatz

123379669
603 589 00 15 03: RNCC: 3 | RNVC: 2

8 May 1995

5120-12-351-4405
Bearing And Bushing Inserter

123514405
8054 798 051: RNCC: 3 | RNVC: 2

26 Jul 2000

5120-12-310-0970
Socket Wrench

123100970
311.2054: RNCC: 3 | RNVC: 2
3954399: RNCC: 5 | RNVC: 9

7 Apr 1987

5120-12-041-5649

5120-12-382-8991
Workpiece Fixture

123828991
R41426: RNCC: 3 | RNVC: 2

20 Aug 2010

5120-12-126-5507
Einfuehr- Huelse

121265507
1875890461: RNCC: 3 | RNVC: 2
1875890461: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-182-5570
Aufnahme

121825570
VW441: RNCC: 3 | RNVC: 9

11 Feb 1980

5120-12-388-6708
Rotat Holding Tool

123886708
113.227: RNCC: 3 | RNVC: 2

12 Apr 2012

5120-12-191-5289

5120-12-121-1087
Flat Tip Screwdriver

121211087
NO PRIMARY REF 12-121-1087: RNCC: 3 | RNVC: 2
111126: RNCC: 5 | RNVC: 9
17106: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-361-1954
Boerdelwer Einsatz

123611954
80996250024: RNCC: 3 | RNVC: 2
80.99625-0024: RNCC: 5 | RNVC: 2

2 Sep 2003

5120-12-126-3349
Hand Hammer

121263349
631A120-500: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-120-4572
Hand Hammer

121204572
5120R1ES800: RNCC: 3 | RNVC: 2
19-800: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-389-3196
Installation And Re

123893196
722589030900: RNCC: 3 | RNVC: 2
722589030900: RNCC: 5 | RNVC: 2

20 Jun 2012

5120-12-150-3938
Demontag Druckring

121503938
1X46104941: RNCC: 3 | RNVC: 2
V104941: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-304-5888
Pedal Adjustment Tool Compressor

123045888
AFG0349302: RNCC: 3 | RNVC: 2

1 Aug 1985

5120-12-325-9995
Mechanical Puller

123259995
124589013300: RNCC: 3 | RNVC: 2

29 Jul 1991

5120-12-139-3103

5120-12-129-4511

5120-12-352-3819
Stake Puller Kit

123523819
2996.09.53: RNCC: 3 | RNVC: 2

14 Nov 2000

5120-12-135-4805
Stauchvorrichtung

121354805
2466-460: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-317-1373
Flat Tip Screwdriver

123171373
139785: RNCC: 3 | RNVC: 9

13 Mar 1989

5120-12-133-3570
Socket Wrench

121333570
2331-441: RNCC: 3 | RNVC: 2
2331-441: RNCC: 5 | RNVC: 2
306-2-1-00-40: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-388-9312
M Indentation Tool

123889312
80996040322: RNCC: 3 | RNVC: 2
80.99604-0322: RNCC: 5 | RNVC: 2

8 May 2012

5120-12-343-3842
Montierdorn

123433842
427589054300: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-372-9491
Socket Wrench

123729491
D2055038: RNCC: 3 | RNVC: 2

10 Sep 2007

5120-12-307-8280
Mechanical Puller Step Plate

123078280
5L16538: RNCC: 3 | RNVC: 2
820015: RNCC: 3 | RNVC: 2

30 Jul 1986

5120-12-345-3418
Face Spanner Wrench Socket

123453418
314589030700: RNCC: 3 | RNVC: 2

3 Mar 1998

5120-12-331-3537
Sealant Dispenser

123313537
07 05 51: RNCC: 3 | RNVC: 2
158 002 01: RNCC: 5 | RNVC: 2

27 Apr 1993

5120-12-342-2116
Ge Montierwerkzeug

123422116
1X56134495: RNCC: 3 | RNVC: 2

7 Jan 1997

5120-12-094-1284

5120-12-373-2631
Crimping Tool Die

123732631
974915: RNCC: 3 | RNVC: 2
4003773046164: RNCC: 5 | RNVC: 2

15 Oct 2007

5120-12-305-2508
Mechanical Puller

123052508
6795969W11: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-382-7852
Cross Tip Screwdriver

123827852
46360010-TCS: RNCC: 3 | RNVC: 2

9 Aug 2010

5120-12-330-1997
Mechanical Puller Attachment

123301997
0851 6699.003: RNCC: 3 | RNVC: 2
8516699.003: RNCC: 5 | RNVC: 2

13 Nov 1992

5120-12-359-9234
Socket Wrench Extension

123599234
000611-770000.00: RNCC: 3 | RNVC: 2

20 Mar 2003

5120-12-134-2662
Ausbauvorrichtung

121342662
003M02300: RNCC: 3 | RNVC: 2
VM68253: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-389-3378
Hose Strap Band Clamping Tool

123893378
171589003700: RNCC: 3 | RNVC: 2
171589003700: RNCC: 5 | RNVC: 2

22 Jun 2012

5120-12-183-2177
Screwdriver Bit

121832177
12728-2000.04: RNCC: 2 | RNVC: 2
12728-2000-04: RNCC: 3 | RNVC: 2

28 Mar 1980

5120-12-194-4511
Torque Wrench Set

121944511
7426: RNCC: 3 | RNVC: 9
65990: RNCC: 5 | RNVC: 9
77675: RNCC: 5 | RNVC: 9

4 Nov 1982

5120-12-177-9984
Dorn

121779984
7418798051: RNCC: 3 | RNVC: 2

13 Mar 1979

5120-12-342-1119
Open End Wrench

123421119
TL5120-0001-165: RNCC: 2 | RNVC: 2
6-18X21: RNCC: 3 | RNVC: 2
DIN3110-18X21: RNCC: 5 | RNVC: 1
003110018002: RNCC: 5 | RNVC: 9
F30048250: RNCC: 5 | RNVC: 9

12 Dec 1996

5120-12-330-8534
Torque Wrench

123308534
2662: RNCC: 3 | RNVC: 2

16 Feb 1993

5120-12-329-0407
Open End Wrench

123290407
4200454: RNCC: 3 | RNVC: 2
420 0454: RNCC: 5 | RNVC: 2

11 Jul 1992

5120-12-336-5857
Montierdorn

123365857
0852 0536: RNCC: 3 | RNVC: 2
8520536: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-176-6849
Einpreszwerkzeug

121766849
435589014300: RNCC: 3 | RNVC: 2
435 C589 01 43 00: RNCC: 5 | RNVC: 2

13 Dec 1978

5120-12-384-3135
Piston Ring Compressor

123843135
F6554678: RNCC: 3 | RNVC: 2

11 Feb 2011

5120-12-381-1643
Screwdriver Bit Set

123811643
05056948001: RNCC: 3 | RNVC: 2
676120: RNCC: 5 | RNVC: 2
KRAFTFORM KOMPAKT 90: RNCC: 5 | RNVC: 2

15 Jan 2010

5120-12-139-3121

5120-12-364-3139
Socket Wrench Socket

123643139
01240006-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-195-8461
Face Spanner Wrench Socket

121958461
5182044: RNCC: 3 | RNVC: 2

25 Apr 1983

5120-12-321-2002
Ph Schraubendreher

123212002
361 300 01: RNCC: 3 | RNVC: 2
6350001: RNCC: 3 | RNVC: 2
150VDE: RNCC: 3 | RNVC: 2

12 Apr 1990

5120-12-384-5396
Pliers

123845396
9219690: RNCC: 3 | RNVC: 2

4 Mar 2011

5120-12-349-4037
St Montierwerkzeug

123494037
0986611298: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-368-8058
Socket Wrench Socket

123688058
771-S29: RNCC: 3 | RNVC: 2
55-29: RNCC: 3 | RNVC: 2
00.51.74.33: RNCC: 5 | RNVC: 2
05010029: RNCC: 5 | RNVC: 2

24 Apr 2006

5120-12-357-6299
We Montierwerkzeug

123576299
510063: RNCC: 3 | RNVC: 2

8 Jul 2002

5120-12-129-3299
Box Wrench

121293299
2W1-2X9-16: RNCC: 3 | RNVC: 2
06840: RNCC: 5 | RNVC: 9
630W1-2X9-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-121-2839
Torque Wrench

121212839
571H001-0-25: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-364-6811
Socket Wrench Socket

123646811
02020015-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-022-8123

5120-12-372-5375
Retaining Ring Pliers

123725375
9090: RNCC: 3 | RNVC: 2

26 Jul 2007

5120-12-311-9372
Spanner Wrench

123119372
99356002: RNCC: 3 | RNVC: 2

30 Oct 1987

5120-12-377-2901
Digging Pick

123772901
061872: RNCC: 3 | RNVC: 2

2 Jan 2009

5120-12-700-4269
Schluessel

127004269
VENTILSCHLUESSEL NVA: RNCC: 2 | RNVC: 2

12 May 1992

5120-12-139-3123
Spannvorrichtung

121393123
8205891431: RNCC: 3 | RNVC: 2
014M03500: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-044-4911

5120-12-336-5531
Seal Inserter

123365531
5870 051 021: RNCC: 3 | RNVC: 2
5870-051-021: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-369-1280
Ausdrueckwerkzeug

123691280
596.008: RNCC: 3 | RNVC: 2

29 May 2006

5120-12-320-7640
Spanner Wrench

123207640
272.369 560: RNCC: 2 | RNVC: 2
272.369 560: RNCC: 3 | RNVC: 2

14 Feb 1990

5120-12-041-2676

5120-12-366-5461
Pedal Adjustment Tool Compressor

123665461
KL-9001-13: RNCC: 3 | RNVC: 2

9 May 2005

5120-12-378-3971
Spanner Wrench

123783971
0639176-01: RNCC: 3 | RNVC: 2

2 Apr 2009

5120-12-357-6132
Mechanical Puller

123576132
F30373492/45: RNCC: 3 | RNVC: 2

8 Jul 2002

5120-12-368-1980
Socket Wrench Socket

123681980
01530024-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-131-6983

5120-12-370-4195
Flat Tip And Cross Tip Screwdriver Set

123704195
96838133: RNCC: 3 | RNVC: 2

6 Nov 2006

5120-12-041-5638

5120-12-357-7442
Pliers

123577442
9091823: RNCC: 3 | RNVC: 2

18 Jul 2002

5120-12-134-2618
Socket Wrench

121342618
027M06600: RNCC: 3 | RNVC: 2
VM60407-12-021: RNCC: 5 | RNVC: 2
080M00200: RNCC: 5 | RNVC: 2
VM60407: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-152-0714
Dorn

121520714
23111-7199.08: RNCC: 2 | RNVC: 2
23111-7199.08: RNCC: 3 | RNVC: 2
23111-7199-08: RNCC: 5 | RNVC: 9
23111-7199-08: RNCC: 5 | RNVC: 9
23111-7199.08: RNCC: 5 | RNVC: 9
23111-7199-08: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-186-2653
Montagewerkzeug

121862653
512206-8692.000: RNCC: 3 | RNVC: 2
512206-8692-000: RNCC: 5 | RNVC: 2

11 Dec 1980

5120-12-316-3075
Socket Head Screw Key Blade

123163075
9924BP: RNCC: 3 | RNVC: 2
42520500: RNCC: 3 | RNVC: 9
99-24BP: RNCC: 5 | RNVC: 9

9 Jan 1989

5120-12-176-7325
Stift

121767325
VG95211-ML-121767325: RNCC: 2 | RNVC: 2
105-41121W1.05: RNCC: 3 | RNVC: 2
105-41121W1-05: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-314-2323
Boerdelwer Einsatz

123142323
4597-51-10: RNCC: 3 | RNVC: 2
1651/10: RNCC: 3 | RNVC: 2

17 Jun 1988

5120-12-327-0877
Pliers

123270877
3772-120: RNCC: 3 | RNVC: 2
3772-1H-130: RNCC: 5 | RNVC: 9

28 Nov 1991

5120-12-126-1522
Spatula

121261522
DIN7216-A30: RNCC: 2 | RNVC: 2
169010: RNCC: 3 | RNVC: 2
02.32.86.06: RNCC: 5 | RNVC: 2
2/3: RNCC: 5 | RNVC: 2
A30DIN7216: RNCC: 5 | RNVC: 2
DIN7216A30: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-186-7360
Einstell Schluessel

121867360
99372223: RNCC: 3 | RNVC: 2
410430: RNCC: 5 | RNVC: 9
410430: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-350-2557
Bl Ausbeulwerkzeug

123502557
302: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-305-7035
Dr Fuehrungshuelse

123057035
P212: RNCC: 3 | RNVC: 9
08L576: RNCC: 5 | RNVC: 9
P212: RNCC: 5 | RNVC: 9
P212: RNCC: 5 | RNVC: 9

5 Dec 1985

5120-12-358-4163
Plier Wrench

123584163
7140907: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-12-199-0771
Hand Terminal Crimping Tool

121990771
SL39: RNCC: 3 | RNVC: 2
SL39: RNCC: 5 | RNVC: 9

23 Mar 1984

5120-12-178-4193
Socket Wrench

121784193
98035081860: RNCC: 3 | RNVC: 2
0133: RNCC: 5 | RNVC: 2

20 Apr 1979

5120-12-168-5278
Nietplatte

121685278
2776018000: RNCC: 3 | RNVC: 2

18 Mar 1977

5120-12-321-1685
Pliers

123211685
8262: RNCC: 3 | RNVC: 9

6 Apr 1990

5120-12-377-2244
Socket Wrench Handle

123772244
415SGS: RNCC: 3 | RNVC: 2

18 Dec 2008

5120-12-159-5794
Mechanical Puller

121595794
100589043300: RNCC: 3 | RNVC: 2
1005890433: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-325-6282
Face Spanner Wrench Socket

123256282
385589040700: RNCC: 3 | RNVC: 2

24 Jun 1991

5120-12-381-5687
Ratchet Wrench

123815687
503.4222: RNCC: 3 | RNVC: 2

4 Mar 2010

5120-12-326-0071
Mechanical Puller Step Plate

123260071
2500194-992440.000.0: RNCC: 2 | RNVC: 2
2500194-992440.000.0: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-133-4583
Schluessel

121334583
5185890209: RNCC: 3 | RNVC: 2
022M00200: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-149-5854

5120-12-140-5003
Haken

121405003
38011-00-01: RNCC: 2 | RNVC: 2
38011-00-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-189-9158
Nadel

121899158
H81026-B200: RNCC: 3 | RNVC: 2

26 Oct 1981

5120-12-313-6569
Ge Montierwerkzeug

123136569
VW447I: RNCC: 3 | RNVC: 2

22 Apr 1988

5120-12-195-2633
Open End Wrench

121952633
420 0502: RNCC: 3 | RNVC: 2
4200502: RNCC: 3 | RNVC: 2

31 Jan 1983

5120-12-189-4694
Aligning Punch

121894694
317589006100: RNCC: 3 | RNVC: 2

29 Sep 1981

5120-12-384-6124
Hand Hammer

123846124
869100402: RNCC: 3 | RNVC: 2

11 Mar 2011

5120-12-363-9281
Bearing And Bushing Inserter And Remover

123639281
T670P5001283: RNCC: 3 | RNVC: 2

5 Aug 2004

5120-12-348-1648
Cable Type Ratchet Lever Puller

123481648
T532OZUB: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-12-135-0950
Hand Terminal Crimping Tool

121350950
69061: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-141-3642
Entlueftungshebel

121413642
1875890263: RNCC: 3 | RNVC: 2
1875890263: RNCC: 3 | RNVC: 9
187589026300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5894

5120-12-152-7166

5120-12-307-1621
Screwdriver Bit

123071621
TL5120-0132-G2: RNCC: 2 | RNVC: 2
3245-TX25: RNCC: 3 | RNVC: 2
992-T25: RNCC: 3 | RNVC: 2
ITX19-T25: RNCC: 3 | RNVC: 2
54TX-T25: RNCC: 3 | RNVC: 2
03100025: RNCC: 5 | RNVC: 2
11712: RNCC: 5 | RNVC: 2
2487130002: RNCC: 5 | RNVC: 2
00.50.21.74: RNCC: 5 | RNVC: 2
INXT19-25: RNCC: 5 | RNVC: 9

15 May 1986

5120-12-327-1290
Socket Wrench

123271290
G33929-V4581-C001-C4: RNCC: 3 | RNVC: 2
G33929-V4581-C001-C4: RNCC: 5 | RNVC: 9

5 Dec 1991

5120-12-313-3701
Pedal Adjustment Tool Compressor

123133701
2500191: RNCC: 2 | RNVC: 2
2590-01050: RNCC: 6 | RNVC: 9

25 Mar 1988

5120-12-330-0652
Inserted Hammer Face

123300652
1952-023: RNCC: 3 | RNVC: 2
H24103: RNCC: 5 | RNVC: 2
1952-023: RNCC: 5 | RNVC: 2

29 Oct 1992

5120-12-129-6235
Spanner Wrench

121296235
5067000: RNCC: 3 | RNVC: 2
5067000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-390-0209
Socket Wrench Set

123900209
09651735: RNCC: 3 | RNVC: 2

25 Sep 2012

5120-12-147-1093
Spanner Wrench

121471093
6192910: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-146-3726

5120-12-309-0169
Mechanical Puller

123090169
1X56136699: RNCC: 3 | RNVC: 2
8213183: RNCC: 5 | RNVC: 9

8 Dec 1986

5120-12-126-2571

5120-12-181-8133
Montierwerk Huelse

121818133
VW418A: RNCC: 3 | RNVC: 9

17 Dec 1979

5120-12-184-4710
Face Spanner Wrench Socket

121844710
1000086-901010: RNCC: 2 | RNVC: 2
1000086-901010: RNCC: 5 | RNVC: 2
1000086-901010: RNCC: 5 | RNVC: 9

29 Jul 1980

5120-12-335-9393
Mechanical Puller

123359393
0850 0951: RNCC: 3 | RNVC: 2
8500951: RNCC: 5 | RNVC: 2

4 Oct 1994

5120-12-325-9024
Combination Box And Open End Wrench

123259024
2060110: RNCC: 3 | RNVC: 2

22 Jul 1991

5120-12-315-8967
Seal Inserter

123158967
0009419525: RNCC: 3 | RNVC: 2

6 Dec 1988

5120-12-365-9162
Swivel Knob Jeweler's Screwdriver

123659162
T4877X 09: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-094-0374

5120-12-310-0443
Torque Wrench

123100443
6110-1CT+: RNCC: 3 | RNVC: 2
6110-1CT: RNCC: 5 | RNVC: 2
6260400001: RNCC: 5 | RNVC: 2
6260410001: RNCC: 5 | RNVC: 9

31 Mar 1987

5120-12-377-2933
Lifting Pneumatic Bag Kit

123772933
1310004900: RNCC: 3 | RNVC: 2
063301: RNCC: 5 | RNVC: 2
4240-02276: RNCC: 6 | RNVC: 9

5 Jan 2009

5120-12-126-3028
Socket Wrench

121263028
34/20X22: RNCC: 3 | RNVC: 2
92-20X22: RNCC: 3 | RNVC: 2
4040M20X22: RNCC: 3 | RNVC: 2
29-20X22: RNCC: 3 | RNVC: 2
4300007: RNCC: 3 | RNVC: 2
092065: RNCC: 5 | RNVC: 2
107833: RNCC: 5 | RNVC: 2
07620: RNCC: 5 | RNVC: 9
1928110018: RNCC: 5 | RNVC: 9
645-20X22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-315-8971
Preformed Packing Inserter

123158971
0009419301: RNCC: 3 | RNVC: 2
000-941-93-01: RNCC: 5 | RNVC: 2

6 Dec 1988

5120-12-154-1019
Kupplung Halter

121541019
CH1776-22NM: RNCC: 3 | RNVC: 2
839589176100: RNCC: 5 | RNVC: 2
CH1776-22NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-324-5964
Seal Inserter

123245964
2080A: RNCC: 3 | RNVC: 2

4 Mar 1991

5120-12-172-1329
Lamp Extractor

121721329
5423: RNCC: 3 | RNVC: 2
1509088: RNCC: 5 | RNVC: 2
WM5423: RNCC: 5 | RNVC: 2

22 Dec 1977

5120-12-336-5095
Bearing And Bushing Inserter And Remover

123365095
0851 5139: RNCC: 3 | RNVC: 2
8515139: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-330-7377
Flat Tip Screwdriver

123307377
DA52: RNCC: 3 | RNVC: 9

2 Feb 1993

5120-12-368-7407
Socket Wrench Screwdriver Attachment

123687407
3530-XZN 5: RNCC: 3 | RNVC: 2
00.47.55.02: RNCC: 5 | RNVC: 2

11 Apr 2006

5120-12-356-7138
L Einstellwerkzeug

123567138
425589002100: RNCC: 3 | RNVC: 2

26 Mar 2002

5120-12-153-8747
Socket Wrench

121538747
50000006000045: RNCC: 3 | RNVC: 2
P1518: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-390-7522
Socket Head Screw Key

123907522
43150005-TCS: RNCC: 3 | RNVC: 2

7 Dec 2012

5120-12-345-6833
Box Wrench

123456833
F30279172: RNCC: 3 | RNVC: 2

15 Apr 1998

5120-12-387-2586
Socket Wrench Extension

123872586
001.913: RNCC: 3 | RNVC: 2
001.913: RNCC: 5 | RNVC: 2

21 Nov 2011

5120-12-131-6816
Flat Tip Screwdriver

121316816
1093015-00001: RNCC: 3 | RNVC: 2
1093015-00001: RNCC: 5 | RNVC: 2
1093015-00001: RNCC: 5 | RNVC: 9
1093015-00001: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-163-6593
Ein- Und Ausbauwerk

121636593
26-21C1015P010: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-370-3325
Hand Terminal Crimping Tool

123703325
975233: RNCC: 3 | RNVC: 2
00.16.66.17: RNCC: 5 | RNVC: 2
4003773-051862: RNCC: 5 | RNVC: 2
97 52 33: RNCC: 5 | RNVC: 2

26 Oct 2006

5120-12-384-0135
Ausziehersatz

123840135
F6784421: RNCC: 3 | RNVC: 2

12 Jan 2011

5120-12-335-4450
Mechanical Puller

123354450
0852 5039: RNCC: 3 | RNVC: 2
8525039: RNCC: 5 | RNVC: 2

18 Aug 1994

5120-12-380-3283
Craftsman's Tweezers

123803283
92 70 46: RNCC: 3 | RNVC: 2
4003773055075: RNCC: 5 | RNVC: 2

20 Oct 2009

5120-12-171-9965
Zeiger Abheber

121719965
4263111: RNCC: 3 | RNVC: 2
3625: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-373-4532
Socket Head Screw Key

123734532
54970: RNCC: 3 | RNVC: 2
0613 140 40: RNCC: 3 | RNVC: 2
4001002549708: RNCC: 5 | RNVC: 2

6 Nov 2007

5120-12-156-8067
Rohrtrage- Zange

121568067
100197-4000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-070-0198

5120-12-197-7768
Preformed Packing Inserter

121977768
620589021400: RNCC: 3 | RNVC: 2
620 589 02 14 00: RNCC: 5 | RNVC: 2

22 Nov 1983

5120-12-197-4717

5120-12-350-3241
Drive Pin Punch

123503241
5600023-990100.001.0: RNCC: 2 | RNVC: 2
5600023-990100.001.0: RNCC: 3 | RNVC: 2

15 Mar 2000

5120-12-382-8009
Socket Wrench Handle

123828009
05 3122 010: RNCC: 3 | RNVC: 2

10 Aug 2010

5120-12-336-5093
We Montierwerkzeug

123365093
0851 5128: RNCC: 3 | RNVC: 2
8515128: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-193-0254
Socket Wrench Extension

121930254
NM 297-57: RNCC: 3 | RNVC: 2
NM297-57: RNCC: 5 | RNVC: 2
NM 297-57: RNCC: 5 | RNVC: 9
NM297-57: RNCC: 5 | RNVC: 9

15 Jun 1982

5120-12-157-0103
Ausbauvorrichtung

121570103
25704-360931.00.0: RNCC: 2 | RNVC: 2
25704-360931-00-0: RNCC: 5 | RNVC: 9
25704-360931.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-121-4906
Open End Wrench

121214906
1931M-12: RNCC: 3 | RNVC: 2
25034769: RNCC: 5 | RNVC: 2
1049270: RNCC: 5 | RNVC: 2
1931M12: RNCC: 5 | RNVC: 2
2209-12: RNCC: 5 | RNVC: 9
104927: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-165-7316
Pliers

121657316
2719SB: RNCC: 3 | RNVC: 2
138118: RNCC: 5 | RNVC: 2
1393227116715019: RNCC: 5 | RNVC: 9
TGL 48-72421,140,OB 019: RNCC: 5 | RNVC: 9
0808393473079: RNCC: 5 | RNVC: 9

22 Jun 1976

5120-12-126-5824
Glas Abheber

121265824
TL5180-0042ABHERGLAS30MMD: RNCC: 2 | RNVC: 2
5180-042ABHERGLAS30MMD: RNCC: 5 | RNVC: 9
5180-0042ABHERGLAS30MMD: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-193-5710
Face Spanner Wrench Socket

121935710
3S51347-0001: RNCC: 3 | RNVC: 2
MAGERD 2782: RNCC: 5 | RNVC: 2
3S51347-0001-407: RNCC: 5 | RNVC: 2
3S51347-0001-403: RNCC: 5 | RNVC: 2
3S51347-0001-405: RNCC: 5 | RNVC: 2

4 Aug 1982

5120-12-334-9942
Bearing And Bushing Inserter

123349942
F30275606: RNCC: 3 | RNVC: 2

8 Jul 1994

5120-12-325-9030
Combination Box And Open End Wrench

123259030
2060180: RNCC: 3 | RNVC: 2

22 Jul 1991

5120-12-023-0174

5120-12-177-3670
Boerdelwerkzeug

121773670
163: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-139-2502
Einfuehrvorrichtung

121392502
010M02500: RNCC: 3 | RNVC: 2
VM75448: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-390-7514
Socket Wrench Screwdriver Attachment

123907514
02050005-TCS: RNCC: 3 | RNVC: 2

7 Dec 2012

5120-12-362-8852
Socket Wrench Handle

123628852
7151391: RNCC: 3 | RNVC: 2

8 Apr 2004

5120-12-133-4636
Box Wrench

121334636
5185890003: RNCC: 3 | RNVC: 2
518589000300: RNCC: 3 | RNVC: 2
026M00500: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-347-2666
Piston Ring Compressor

123472666
57643-645: RNCC: 3 | RNVC: 2

18 Nov 1998

5120-12-307-1640
Mechanical Puller

123071640
158: RNCC: 3 | RNVC: 2

15 May 1986

5120-12-044-5797

5120-12-363-0242
Socket Wrench Socket

123630242
5583167: RNCC: 3 | RNVC: 2
(241)A42495583167: RNCC: 8 | RNVC: 2
5583167: RNCC: 8 | RNVC: 2

27 Apr 2004

5120-12-370-7318
Driftpin

123707318
1030070-991000.050.0: RNCC: 2 | RNVC: 2
1030070-991000.050.0: RNCC: 3 | RNVC: 2

14 Dec 2006

5120-12-343-6066
Spanner Wrench

123436066
100278-73000.01.0: RNCC: 2 | RNVC: 2
100278-73000.01.0: RNCC: 3 | RNVC: 2

8 Jul 1997

5120-12-140-1155

5120-12-351-4240
Seal Inserter

123514240
9254914000: RNCC: 3 | RNVC: 2

25 Jul 2000

5120-12-314-6084
Hyd Einbauwerkzeug

123146084
0852 9871: RNCC: 3 | RNVC: 2
8529871: RNCC: 5 | RNVC: 2
MAGERD 1168: RNCC: 5 | RNVC: 9

22 Jul 1988

5120-12-163-6079
Bearing And Bushing Inserter

121636079
105-14181W1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-093-7233

5120-12-352-5043
Spanner Wrench

123525043
1437.0232843: RNCC: 3 | RNVC: 2

23 Nov 2000

5120-12-307-8505
Socket Wrench

123078505
74002-801: RNCC: 3 | RNVC: 2

1 Aug 1986

5120-12-374-6669
Bearing And Bushing Inserter

123746669
F30374198: RNCC: 3 | RNVC: 2

5 Mar 2008

5120-12-394-2885
Mechanical Puller Adapter

123942885
655589006300: RNCC: 3 | RNVC: 2

18 Nov 2013

5120-12-198-7594
Hand Hammer

121987594
176: RNCC: 3 | RNVC: 2
3726: RNCC: 5 | RNVC: 9

23 Feb 1984

5120-12-394-6139
Open End Wrench

123946139
13605: RNCC: 3 | RNVC: 2

18 Dec 2013

5120-12-357-7745
Bearing And Bushing Inserter And Remover

123577745
F6143556: RNCC: 3 | RNVC: 2

22 Jul 2002

5120-12-314-1725
Ausdrueckwerkzeug

123141725
0852 6913: RNCC: 3 | RNVC: 2
8526913: RNCC: 5 | RNVC: 2

15 Jun 1988

5120-12-364-9564
Swivel Knob Jeweler's Screwdriver

123649564
4880X ESD 4,0X100: RNCC: 3 | RNVC: 2
T4880XESD410: RNCC: 5 | RNVC: 9

18 Nov 2004

5120-12-172-9120
Mechanical Puller

121729120
1X56 136 658: RNCC: 3 | RNVC: 2
1X56136658: RNCC: 5 | RNVC: 9

2 Mar 1978

5120-12-324-5680
Mechanical Puller Attachment

123245680
VM563-3: RNCC: 3 | RNVC: 2
AZV906669-3: RNCC: 5 | RNVC: 2

28 Feb 1991

5120-12-310-5405
Ausdrueckwerkzeug

123105405
80996350010: RNCC: 3 | RNVC: 2
80.99635.0010: RNCC: 5 | RNVC: 2

29 May 1987

5120-12-384-8081
Hand Hammer

123848081
51.000.029: RNCC: 3 | RNVC: 2
51.000.029: RNCC: 5 | RNVC: 2

31 Mar 2011

5120-12-193-6001
Hand Screw Starter

121936001
NO PRIMARY REF 12-193-6001: RNCC: 3 | RNVC: 2
GA230: RNCC: 5 | RNVC: 9

9 Aug 1982

5120-12-195-6010
Flat Tip Screwdriver

121956010
FM7011: RNCC: 3 | RNVC: 2
MAGERD 9803: RNCC: 5 | RNVC: 9

16 Mar 1983

5120-12-364-3116
Socket Wrench Handle

123643116
11110020-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-391-7395
Screwdriver Bit Set And Handle

123917395
36078: RNCC: 3 | RNVC: 2
2872T10: RNCC: 5 | RNVC: 2

2 Apr 2013

5120-12-368-7396
Socket Wrench Screwdriver Attachment

123687396
3530-XZN 6: RNCC: 3 | RNVC: 2
00.47.56.03: RNCC: 5 | RNVC: 2

11 Apr 2006

5120-12-317-1374
Flat Tip Screwdriver

123171374
139815: RNCC: 3 | RNVC: 9

13 Mar 1989

5120-12-333-4789
Bearing And Bushing Inserter

123334789
9108510072: RNCC: 3 | RNVC: 2

22 Dec 1993

5120-12-126-3187

5120-12-023-1398

5120-12-151-8403
Adapter

121518403
BD7001E115: RNCC: 3 | RNVC: 2
1292001-001204-115: RNCC: 5 | RNVC: 2
1292001-001204.115: RNCC: 5 | RNVC: 2
BD7001E115: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-320-9367
Inspection Mirror

123209367
081490-23: RNCC: 3 | RNVC: 2
67952-23: RNCC: 3 | RNVC: 2
250A-21-2100: RNCC: 5 | RNVC: 2
67952-23: RNCC: 5 | RNVC: 9
250A-21-2100: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-12-182-0143
Dreh- Griff

121820143
009-515.130-003: RNCC: 2 | RNVC: 2
5222-130.003: RNCC: 2 | RNVC: 2
009-515.130-003: RNCC: 3 | RNVC: 2
009-515-130-003: RNCC: 5 | RNVC: 2
5222-130-003: RNCC: 5 | RNVC: 2
09-515-130-003: RNCC: 5 | RNVC: 2
5222-130.003: RNCC: 5 | RNVC: 9

7 Jan 1980

5120-12-144-0334
Schluessel

121440334
5800571-58: RNCC: 3 | RNVC: 2
5800571-58: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-135-5868
Poker

121355868
76L: RNCC: 3 | RNVC: 2
5120-12-135-5868: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-196-9580
Mechan Druckstueck

121969580
E3-2002040: RNCC: 3 | RNVC: 2
E3-2002040: RNCC: 5 | RNVC: 9

5 Sep 1983

5120-12-163-6612
Abziehvorrichtung

121636612
26-21C1107G003: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-362-7153
Leveling-Support Jack

123627153
245/12: RNCC: 3 | RNVC: 2

23 Mar 2004

5120-12-363-1504
Blindni Mundstueck

123631504
7202628: RNCC: 3 | RNVC: 2

6 May 2004

5120-12-163-5271

5120-12-374-5533
Socket Wrench

123745533
7L0959789: RNCC: 3 | RNVC: 2

26 Feb 2008

5120-12-181-1430
Socket Wrench

121811430
312589090700: RNCC: 3 | RNVC: 9

29 Oct 1979

5120-12-320-2072
Montierwerk Huelse

123202072
214.75.516: RNCC: 3 | RNVC: 2
214.80.335: RNCC: 5 | RNVC: 2

18 Dec 1989

5120-12-199-0062
Lamp Extractor

121990062
2003 206: RNCC: 3 | RNVC: 2

20 Mar 1984

5120-12-343-6372
Flat Tip Screwdriver

123436372
111398: RNCC: 3 | RNVC: 2

10 Jul 1997

5120-12-319-5321
Spanner Wrench

123195321
335907-9041.000: RNCC: 2 | RNVC: 2
335907-9041.000: RNCC: 5 | RNVC: 2

10 Oct 1989

5120-12-141-3014
Pliers

121413014
3113160: RNCC: 3 | RNVC: 2
56530.102: RNCC: 5 | RNVC: 2
331A: RNCC: 5 | RNVC: 9
573A202A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-168-5274
Nietdorn

121685274
2776021000: RNCC: 3 | RNVC: 2

18 Mar 1977

5120-12-367-5887
Flat Tip Screwdriver

123675887
10037: RNCC: 3 | RNVC: 2

7 Sep 2005

5120-12-347-1874
Montierdorn

123471874
0852 5102: RNCC: 3 | RNVC: 2

10 Nov 1998

5120-12-374-4245
Torque Wrench

123744245
2875WKDS: RNCC: 3 | RNVC: 2

15 Feb 2008

5120-12-359-8319
Mitnehmers Adapter

123598319
312589030703: RNCC: 3 | RNVC: 2

13 Mar 2003

5120-12-364-5632
Combination Box And Open End Wrench

123645632
40082121-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-126-3038

5120-12-365-6612
Pliers

123656612
CBD32063G01: RNCC: 3 | RNVC: 2

24 Jan 2005

5120-12-382-8040
Cross Tip Screwdriver

123828040
05 5300 100: RNCC: 3 | RNVC: 2

10 Aug 2010

5120-12-123-5926
Combination Box And Open End Wrench

121235926
66N: RNCC: 3 | RNVC: 2
12264: RNCC: 5 | RNVC: 2
A66N: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-5463
Spanner Wrench

121265463
3155890307: RNCC: 3 | RNVC: 2
315589030700: RNCC: 5 | RNVC: 2
315589030700: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-358-1858
Hand Hydraulic Jack

123581858
715 54 12: RNCC: 3 | RNVC: 2

24 Sep 2002

5120-12-393-9123
Socket Wrench Handle

123939123
05013252001: RNCC: 3 | RNVC: 2
410-1/4X230: RNCC: 5 | RNVC: 2

21 Oct 2013

5120-12-339-9579
Schluesseleinsatz

123399579
5073326: RNCC: 3 | RNVC: 2
698-480-0011: RNCC: 5 | RNVC: 2

6 Feb 1996

5120-12-126-5508
Socket Wrench

121265508
2815-007: RNCC: 3 | RNVC: 2
0005810901: RNCC: 3 | RNVC: 9
0005810901: RNCC: 5 | RNVC: 2
70022532122001: RNCC: 5 | RNVC: 2
2815007: RNCC: 5 | RNVC: 2
571D403-27: RNCC: 5 | RNVC: 9
22532122001: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-8836
Torque Wrench Adapter

121768836
75-675: RNCC: 3 | RNVC: 2

27 Dec 1978

5120-12-364-6987
Bearing And Bushing Inserter

123646987
5805892233/03: RNCC: 3 | RNVC: 2

21 Oct 2004

5120-12-371-5224
Bearing Staking Installation Tool

123715224
5176041: RNCC: 3 | RNVC: 2
541147: RNCC: 5 | RNVC: 2

12 Apr 2007

5120-12-146-5970

5120-12-355-3943
Socket Wrench Screwdriver Attachment

123553943
5555143: RNCC: 3 | RNVC: 2

9 Nov 2001

5120-12-094-1301

5120-12-041-2667

5120-12-123-5706
Socket Wrench Socket

121235706
4014 19: RNCC: 3 | RNVC: 2
8900DM19: RNCC: 3 | RNVC: 2
1000Z19: RNCC: 3 | RNVC: 2
F30049360: RNCC: 3 | RNVC: 2
110573: RNCC: 5 | RNVC: 2
11950: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-385-2613
Hand Hammer

123852613
50.000.101: RNCC: 3 | RNVC: 2

13 May 2011

5120-12-150-3947
Schluessel

121503947
837589050900: RNCC: 3 | RNVC: 2
8375890509: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-383-6828
Spanner Wrench

123836828
1X56.104.920: RNCC: 3 | RNVC: 2

24 Nov 2010

5120-12-011-0222

5120-12-137-8336

5120-12-153-5227
Socket Wrench Socket

121535227
CH1773-4FE: RNCC: 3 | RNVC: 2
5615890108/00: RNCC: 5 | RNVC: 2
561589010800: RNCC: 5 | RNVC: 2
CH1773-4FE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-322-9498
Hand Hammer

123229498
C347-1000: RNCC: 3 | RNVC: 2
148237: RNCC: 5 | RNVC: 2
C3471000: RNCC: 5 | RNVC: 2

10 Oct 1990

5120-12-153-7964
Schluessel

121537964
CH1773-119: RNCC: 3 | RNVC: 2
5605890716/00: RNCC: 5 | RNVC: 2
560589071600: RNCC: 5 | RNVC: 2
CH1773-119: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-384-2443
Mechanical Puller Attachment

123842443
08996151410: RNCC: 3 | RNVC: 2
08.99615-1410: RNCC: 5 | RNVC: 2

7 Feb 2011

5120-12-134-4119
Socket Wrench Handle Bar

121344119
52018937800: RNCC: 3 | RNVC: 2
HKS357: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-357-7355
We Montierwerkzeug

123577355
F6276882: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-367-1613
Box Wrench

123671613
161330: RNCC: 3 | RNVC: 2
1447821: RNCC: 5 | RNVC: 2

14 Jul 2005

5120-12-368-7043
Cross Tip Screwdriver

123687043
113PH4: RNCC: 3 | RNVC: 2
01.72.40.71: RNCC: 5 | RNVC: 2
11308: RNCC: 5 | RNVC: 2

7 Apr 2006

5120-12-335-5693
Boiler Tube Wire Brush

123355693
7023.2261: RNCC: 3 | RNVC: 2
70232261: RNCC: 5 | RNVC: 2

1 Sep 1994

5120-12-042-5957

5120-12-321-9042
Body And Fender Spoon

123219042
1927: RNCC: 3 | RNVC: 2
5141980019: RNCC: 5 | RNVC: 2

9 Jul 1990

5120-12-340-2654
Gewindeein Spindel

123402654
01500679620: RNCC: 3 | RNVC: 2

20 Mar 1996

5120-12-371-3646
Combination Box And Open End Wrench Set

123713646
205S 25M: RNCC: 3 | RNVC: 2
00.31.08.04: RNCC: 5 | RNVC: 2

20 Mar 2007

5120-12-343-7274
Swivel Knob Jeweler's Screwdriver

123437274
240 033 90: RNCC: 3 | RNVC: 2
34804: RNCC: 3 | RNVC: 2
T4880X 310: RNCC: 3 | RNVC: 2
01.72.81.15: RNCC: 5 | RNVC: 2
348-3X100: RNCC: 5 | RNVC: 2

17 Jul 1997

5120-12-147-3000
Spanner Wrench

121473000
1-36-14-005: RNCC: 3 | RNVC: 2
K2795: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-389-5319
Socket Head Screw Key

123895319
48560015-TCS: RNCC: 3 | RNVC: 2

18 Jul 2012

5120-12-193-9431
Elektron Auszieher

121939431
0075128: RNCC: 3 | RNVC: 2
MAGERD 0587: RNCC: 5 | RNVC: 9

16 Sep 1982

5120-12-023-3214

5120-12-144-2094
Rotating Members Aligning Tool

121442094
837589082100: RNCC: 3 | RNVC: 2
8375890821: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-192-7713
Socket Head Screw Key

121927713
116589020700: RNCC: 3 | RNVC: 2

24 May 1982

5120-12-316-1456
Socket Head Screw Key

123161456
1X56136257: RNCC: 3 | RNVC: 2

24 Dec 1988

5120-12-150-5203
Abpreszvorrichtung

121505203
837589012500: RNCC: 3 | RNVC: 2
8375890125: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-312-9137
Face Spanner Wrench Socket

123129137
KDEP 2969: RNCC: 3 | RNVC: 2

18 Feb 1988

5120-12-140-2226

5120-12-133-3587

5120-12-312-9581
Pin Inserter

123129581
318262: RNCC: 3 | RNVC: 2

22 Feb 1988

5120-12-369-1066
Seal Inserter

123691066
0986613248: RNCC: 3 | RNVC: 2

23 May 2006

5120-12-311-9637
Socket Head Screw Socket Wrench Attachment Wrench Set

123119637
54/8/4: RNCC: 3 | RNVC: 2

5 Nov 1987

5120-12-307-4952
Bearing And Bushing Inserter

123074952
1X56137135: RNCC: 3 | RNVC: 2
0694818: RNCC: 5 | RNVC: 2
694818: RNCC: 5 | RNVC: 9

24 Jun 1986

5120-12-386-5546
Spanner Wrench

123865546
F30451003: RNCC: 3 | RNVC: 2

9 Sep 2011

5120-12-357-6150
Electrical Contact Inserter

123576150
166963: RNCC: 3 | RNVC: 2
ZBW W: RNCC: 5 | RNVC: 2

8 Jul 2002

5120-12-181-3940
Zentrierhuelse

121813940
130589006100: RNCC: 3 | RNVC: 9

19 Nov 1979

5120-12-342-9884
Bearing And Bushing Inserter And Remover

123429884
80996040027: RNCC: 3 | RNVC: 2
80.99604.0027: RNCC: 5 | RNVC: 2

21 Apr 1997

5120-12-376-5770
Spanner Wrench

123765770
19-905: RNCC: 3 | RNVC: 2

17 Oct 2008

5120-12-362-0818
Socket Wrench Handle

123620818
107428: RNCC: 3 | RNVC: 2

7 Jan 2004

5120-12-333-5667
Seal Inserter

123335667
1842401: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-313-4274
Werkst Druckstueck

123134274
80996020025: RNCC: 3 | RNVC: 2
80.99602.0025: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-368-6752
Socket Wrench Screwdriver Attachment

123686752
3520-PH1: RNCC: 3 | RNVC: 2
00.47.42.86: RNCC: 5 | RNVC: 2

5 Apr 2006

5120-12-380-6591
Ratchet Wrench

123806591
503.4811: RNCC: 3 | RNVC: 2

17 Nov 2009

Load More Results