What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 22 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 22 of 62

5120-12-371-9015
Spatula

123719015
327220: RNCC: 3 | RNVC: 2

29 May 2007

5120-12-384-8593
Saddler's Harness Awl Blade

123848593
50.000.009: RNCC: 3 | RNVC: 2

5 Apr 2011

5120-12-307-3670
Box Wrench

123073670
3700587: RNCC: 2 | RNVC: 2
3700587: RNCC: 3 | RNVC: 2

10 Jun 1986

5120-12-041-5738

5120-12-154-1808
Kupplu Halteplatte

121541808
0676110000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-317-0974
Hand Armament Subsystem Carrier

123170974
4089345: RNCC: 3 | RNVC: 2

10 Mar 1989

5120-12-317-1290
Rohrbiege Aufnahme

123171290
HL8: RNCC: 3 | RNVC: 2

13 Mar 1989

5120-12-360-8014
Mechanical Puller

123608014
PKZX0FQ0: RNCC: 3 | RNVC: 2

11 Jul 2003

5120-12-023-2544

5120-12-189-7024
Lamp Cap Extractor

121897024
1301: RNCC: 3 | RNVC: 2

19 Oct 1981

5120-12-021-2658

5120-12-157-0034
Socket Wrench

121570034
4653: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-306-7426
Seal Inserter

123067426
9110404: RNCC: 3 | RNVC: 2
32000047101000: RNCC: 5 | RNVC: 2

25 Mar 1986

5120-12-370-6297
Trowel

123706297
740 030 00: RNCC: 3 | RNVC: 2
02.33.66.86: RNCC: 5 | RNVC: 2

4 Dec 2006

5120-12-320-9363
Craftsman's Tweezers

123209363
71763-AM: RNCC: 3 | RNVC: 2
727530-AM: RNCC: 3 | RNVC: 2
250A-10-1002: RNCC: 5 | RNVC: 2
250A-10-1002: RNCC: 5 | RNVC: 9
71763-AM: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-12-371-7407
Montierwerk Huelse

123717407
904589086300: RNCC: 3 | RNVC: 2

10 May 2007

5120-12-365-9611
Screwdriver Bit

123659611
284-6X6: RNCC: 3 | RNVC: 2
00639: RNCC: 5 | RNVC: 2

22 Feb 2005

5120-12-372-8051
Float

123728051
828 280 00: RNCC: 3 | RNVC: 2
02.33.77.00: RNCC: 5 | RNVC: 2

23 Aug 2007

5120-12-304-5228
Schluesseleinsatz

123045228
31R17: RNCC: 3 | RNVC: 2
624608: RNCC: 5 | RNVC: 2

26 Jul 1985

5120-12-133-3981
Screwdriver Bit

121333981
55Z5-16: RNCC: 3 | RNVC: 2
109082: RNCC: 5 | RNVC: 2
6990Z5-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-384-2005
Bearing And Bushing Inserter

123842005
80996170060: RNCC: 3 | RNVC: 2
80.99617-0060: RNCC: 5 | RNVC: 2

2 Feb 2011

5120-12-121-8255
Open End Wrench

121218255
NO PRIMARY REF 12-121-8255: RNCC: 3 | RNVC: 2
132898: RNCC: 5 | RNVC: 9
226998: RNCC: 5 | RNVC: 9
1953Z3-4X13-16: RNCC: 5 | RNVC: 9
6AF3-4X13-16: RNCC: 5 | RNVC: 9
6-3-4X13-16: RNCC: 5 | RNVC: 9
6AF3-4X13-16: RNCC: 5 | RNVC: 9
1953Z3/4X13/16: RNCC: 5 | RNVC: 9
6A2426: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-369-3993
Open End Wrench

123693993
0008060-801: RNCC: 3 | RNVC: 2
028013802: RNCC: 5 | RNVC: 2

29 Jun 2006

5120-12-341-6223
Crimping Tool Die

123416223
VG95236T11AB003: RNCC: 2 | RNVC: 2
MRP0856: RNCC: 3 | RNVC: 9
MRP0856: RNCC: 5 | RNVC: 2

3 Oct 1996

5120-12-195-1563
Face Spanner Wrench Socket

121951563
80.99603.0038: RNCC: 3 | RNVC: 2

18 Jan 1983

5120-12-191-2940
Piston Ring Expander

121912940
CH1992/19: RNCC: 3 | RNVC: 2
1206 9067: RNCC: 3 | RNVC: 2
3.601.0.018.017.6: RNCC: 5 | RNVC: 9
1206 9067: RNCC: 5 | RNVC: 9
12069067: RNCC: 5 | RNVC: 9
3-601-0-018-017-6: RNCC: 5 | RNVC: 9
3.601.0.018.017.6: RNCC: 5 | RNVC: 9

26 Jan 1982

5120-12-157-9071

5120-12-357-7350
Seal Inserter

123577350
F30278776: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-332-6915
Bearing And Bushing Remover

123326915
9108510144: RNCC: 3 | RNVC: 2

7 Sep 1993

5120-12-126-2639

5120-12-152-1769
Spanner Wrench

121521769
160CZN1172: RNCC: 3 | RNVC: 2
000000-0015.310: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-368-6681
Socket Wrench Set

123686681
1400-IMU: RNCC: 3 | RNVC: 2
00.45.51.89: RNCC: 5 | RNVC: 2

5 Apr 2006

5120-12-700-4337
Pry Bar

127004337
730.99.266: RNCC: 2 | RNVC: 2

19 May 1992

5120-12-368-7426
Socket Wrench Screwdriver Attachment

123687426
3530-XZN 10: RNCC: 3 | RNVC: 2
00.47.59.06: RNCC: 5 | RNVC: 2

11 Apr 2006

5120-12-121-6906

5120-12-339-7882
Montierwerk Huelse

123397882
110400: RNCC: 3 | RNVC: 2
698-724-0000: RNCC: 5 | RNVC: 2

17 Jan 1996

5120-12-120-4579
Cable Type Ratchet Lever Puller

121204579
GREIFZUG3000: RNCC: 3 | RNVC: 2
5120-016: RNCC: 5 | RNVC: 9
5120-21250: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-350-2716
Bl Ausbeulwerkzeug

123502716
066KR: RNCC: 3 | RNVC: 2

9 Mar 2000

5120-12-041-2685

5120-12-092-2304

5120-12-139-2466
Schluesselsatz

121392466
027M05000: RNCC: 3 | RNVC: 2
VM55573: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-338-3139
Hand Shovel

123383139
69.09: RNCC: 3 | RNVC: 2
69.09: RNCC: 5 | RNVC: 2

21 Jun 1995

5120-12-312-1526
Bearing And Bushing Inserter

123121526
142600: RNCC: 3 | RNVC: 2
80.99606-0285: RNCC: 5 | RNVC: 2
80996060285: RNCC: 5 | RNVC: 2
E7375-00-00: RNCC: 5 | RNVC: 2

27 Nov 1987

5120-12-131-5375
Schluessel

121315375
NO PRIMARY REF 12-131-5375: RNCC: 3 | RNVC: 2
AT0MATWR54: RNCC: 5 | RNVC: 2
AT0MATWR54: RNCC: 5 | RNVC: 9
AT0MATWR54: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-6593
Spanner Wrench

123056593
196209: RNCC: 3 | RNVC: 2
196209: RNCC: 5 | RNVC: 9
264-1240: RNCC: 5 | RNVC: 9
196209: RNCC: 5 | RNVC: 9

2 Dec 1985

5120-12-148-0666
Ventilmontagedorn

121480666
053907: RNCC: 3 | RNVC: 2
WZ80: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-375-6902
Screwdriver Bit

123756902
1802542: RNCC: 3 | RNVC: 2
2141 PZ 1: RNCC: 5 | RNVC: 2
1802542: RNCC: 5 | RNVC: 2
2141 PZ 1: RNCC: 5 | RNVC: 2

24 Jun 2008

5120-12-177-0292
Spanner Wrench

121770292
331700: RNCC: 3 | RNVC: 2
331700: RNCC: 3 | RNVC: 9
0331700: RNCC: 5 | RNVC: 9

8 Jan 1979

5120-12-120-6019
Hand Abrasive Wheel Dresser

121206019
TL5120-0100: RNCC: 2 | RNVC: 2
33801: RNCC: 3 | RNVC: 2
141270: RNCC: 3 | RNVC: 2
569420: RNCC: 3 | RNVC: 2
56900: RNCC: 5 | RNVC: 2
5690: RNCC: 5 | RNVC: 9
TK5120-019: RNCC: 5 | RNVC: 9
6090: RNCC: 5 | RNVC: 9
5120-90672: RNCC: 6 | RNVC: 9
5120-90672: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-133-3958
Screwdriver Bit

121333958
NO PRIMARY REF 12-133-3958: RNCC: 3 | RNVC: 2
109047: RNCC: 5 | RNVC: 9
6988M5: RNCC: 5 | RNVC: 9
6988M6-2X0-90: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-5213
Sch Durchdrehhebel

121535213
CH1774-2NM: RNCC: 3 | RNVC: 2
820589406100: RNCC: 5 | RNVC: 2
8205894061/00: RNCC: 5 | RNVC: 2
CH1774-2NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-2821
Retaining Ring Pliers

121532821
CH1772-12FE: RNCC: 3 | RNVC: 2
A30.9010-31: RNCC: 5 | RNVC: 2
12019978: RNCC: 5 | RNVC: 2
1201 9978: RNCC: 5 | RNVC: 2
A30-9010-31: RNCC: 5 | RNVC: 9
CH1772-12FE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-024-1251

5120-12-358-7767
Bearing And Bushing Inserter

123587767
80996040156: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-358-7771
Montierdorn

123587771
80996060395: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-389-4744
Inspection Mirror

123894744
13120N: RNCC: 3 | RNVC: 2
77480002: RNCC: 5 | RNVC: 2

11 Jul 2012

5120-12-159-9559
Face Spanner Wrench Socket

121599559
3215890207: RNCC: 3 | RNVC: 2
321589020700: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-301-3180
Seal Inserter

123013180
105-14110W1: RNCC: 3 | RNVC: 2

5 Oct 1984

5120-12-380-4820
Torque Wrench Adapter

123804820
8600429: RNCC: 3 | RNVC: 2

3 Nov 2009

5120-12-373-4073
Flat Tip Screwdriver

123734073
60103: RNCC: 3 | RNVC: 2
4001002601031: RNCC: 5 | RNVC: 2

30 Oct 2007

5120-12-378-7665
Cable Type Ratchet Lever Puller

123787665
DIN14800-MZ32: RNCC: 2 | RNVC: 2
059545: RNCC: 3 | RNVC: 2
3950-00316: RNCC: 6 | RNVC: 9

11 May 2009

5120-12-123-5445
Socket Wrench

121235445
NO PRIMARY REF 12-123-5445: RNCC: 3 | RNVC: 2
24-316: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-394-3589
Open End Wrench

123943589
H01.024775: RNCC: 3 | RNVC: 2

25 Nov 2013

5120-12-385-4915
Hand Rivet Set

123854915
4910028: RNCC: 3 | RNVC: 2

8 Jun 2011

5120-12-366-2137
Socket Wrench Socket

123662137
12180030-TCS: RNCC: 3 | RNVC: 2

22 Mar 2005

5120-12-309-5778
Hand Hammer

123095778
03399011: RNCC: 3 | RNVC: 9
BKL399/011 SCHUHMACHERHAMMER: RNCC: 3 | RNVC: 9

4 Feb 1987

5120-12-130-4095

5120-12-167-9697
Spanner Wrench

121679697
335914-9009.000: RNCC: 2 | RNVC: 2
335914-9009.000: RNCC: 3 | RNVC: 2
1255-31000W2: RNCC: 5 | RNVC: 2
335914-9009.000: RNCC: 5 | RNVC: 9
1255-31000W2: RNCC: 5 | RNVC: 9
335914-9009.000: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-359-6695
Bearing And Bushing Inserter And Remover

123596695
T622P3003160: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-348-6326
Flat Tip Screwdriver Set

123486326
7372/S7: RNCC: 3 | RNVC: 2

28 Jul 1999

5120-12-363-8865
Bearing And Bushing Inserter

123638865
T670P5001234: RNCC: 3 | RNVC: 2

3 Aug 2004

5120-12-330-5540
Stud Inserter

123305540
0851 0490: RNCC: 3 | RNVC: 2
8510490: RNCC: 5 | RNVC: 2

8 Jan 1993

5120-12-314-2767
Mechan Druckstueck

123142767
0853 1633: RNCC: 3 | RNVC: 2
8531633: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-168-1283
Spanner Wrench

121681283
335914-9018.000: RNCC: 3 | RNVC: 2
1255-31000W10: RNCC: 5 | RNVC: 2
335914-9018.000: RNCC: 5 | RNVC: 2
1255-31000W10: RNCC: 5 | RNVC: 2
335914-9018.000: RNCC: 5 | RNVC: 9
1255-31000W10: RNCC: 5 | RNVC: 9
335914-9018.000: RNCC: 5 | RNVC: 9

18 Feb 1977

5120-12-392-4544
Screwdriver Bit

123924544
SF55BIT20: RNCC: 3 | RNVC: 2

10 Jun 2013

5120-12-340-6698
Nietzugst Fuehrung

123406698
349301: RNCC: 3 | RNVC: 2

22 May 1996

5120-12-023-1808

5120-12-339-9309
Schluessel

123399309
255401: RNCC: 3 | RNVC: 2
120002: RNCC: 3 | RNVC: 2
120002 2-63 AMP: RNCC: 5 | RNVC: 2
7047-70006-40-3: RNCC: 5 | RNVC: 2

2 Feb 1996

5120-12-152-0706
Spanner Wrench

121520706
23111-7102.11: RNCC: 2 | RNVC: 2
23111-7102.11: RNCC: 3 | RNVC: 2
23111-7102-11: RNCC: 5 | RNVC: 9
23111-7102.11: RNCC: 5 | RNVC: 9
23111-7102-11: RNCC: 5 | RNVC: 9
23111-7102-11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-352-8842
Pliers

123528842
2521G-140: RNCC: 3 | RNVC: 2
0100293: RNCC: 5 | RNVC: 2

2 Jan 2001

5120-12-326-3090
Torque Wrench Adapter

123263090
52250-080: RNCC: 3 | RNVC: 2

28 Aug 1991

5120-12-341-1344
Driftpin

123411344
212660: RNCC: 3 | RNVC: 2
212660: RNCC: 3 | RNVC: 2
0212660: RNCC: 5 | RNVC: 9

31 Jul 1996

5120-12-171-5360
Auszieher

121715360
335929-9008.000: RNCC: 3 | RNVC: 2
1239W1: RNCC: 5 | RNVC: 2
1239W1: RNCC: 5 | RNVC: 2
335929-9008.000: RNCC: 5 | RNVC: 9

21 Oct 1977

5120-12-070-0078

5120-12-325-9020
Combination Box And Open End Wrench

123259020
2060070: RNCC: 3 | RNVC: 2

22 Jul 1991

5120-12-345-4451
Hand Blind Riveter

123454451
NTS: RNCC: 3 | RNVC: 2
7030010: RNCC: 5 | RNVC: 2

17 Mar 1998

5120-12-358-7780
Mechanical Puller Attachment

123587780
80996230003: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-193-6672

5120-12-123-5527

5120-12-180-4098
Lamp Cap Extractor

121804098
5260502: RNCC: 3 | RNVC: 2
603-145: RNCC: 3 | RNVC: 2
492 005: RNCC: 5 | RNVC: 2

10 Sep 1979

5120-12-319-6539
Ratchet Wrench

123196539
V731.43.211: RNCC: 3 | RNVC: 2
145012: RNCC: 3 | RNVC: 2
731.43.211: RNCC: 5 | RNVC: 2

23 Oct 1989

5120-12-342-6604
Crimping Tool Die

123426604
210796: RNCC: 3 | RNVC: 2

12 Mar 1997

5120-12-359-6707
Bearing And Bushing Inserter And Remover

123596707
T623P3002051: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-388-5030
Spanner Wrench

123885030
1368571: RNCC: 3 | RNVC: 2

27 Mar 2012

5120-12-381-6110
Lifting Pneumatic Bag Kit

123816110
PNEUHEBEPZH2000: RNCC: 3 | RNVC: 2

9 Mar 2010

5120-12-347-4392
Crimping Tool Die

123474392
C35: RNCC: 3 | RNVC: 2

10 Dec 1998

5120-12-325-1590
Wuergezangenteil

123251590
1237-825: RNCC: 3 | RNVC: 2
DTCT6.0/10.0: RNCC: 3 | RNVC: 2
1237-825: RNCC: 5 | RNVC: 9
DTCT6.0/10.0: RNCC: 5 | RNVC: 9

8 May 1991

5120-12-187-1732
Montierhuelse

121871732
05000261067: RNCC: 3 | RNVC: 2

9 Mar 1981

5120-12-392-7387
Socket Wrench

123927387
225001: RNCC: 2 | RNVC: 2
225001: RNCC: 3 | RNVC: 2

3 Jul 2013

5120-12-380-5109
Torque Wrench Adapter

123805109
RRT017338: RNCC: 3 | RNVC: 2

4 Nov 2009

5120-12-166-7734
Schluessel

121667734
30-79350-0119: RNCC: 3 | RNVC: 2
A125: RNCC: 5 | RNVC: 2

21 Oct 1976

5120-12-357-7153
Socket Wrench Crowfoot Attachment

123577153
J0433557D311-000A1-002: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-175-4263
Flat Tip Screwdriver

121754263
8000-1X6X250: RNCC: 3 | RNVC: 9
131479: RNCC: 5 | RNVC: 2

15 Sep 1978

5120-12-365-0813
Box Wrench Set

123650813
K-705-10-M: RNCC: 3 | RNVC: 2
50705945580: RNCC: 5 | RNVC: 2

26 Nov 2004

5120-12-393-7889
Schalter Auszieher

123937889
84-918: RNCC: 3 | RNVC: 2

10 Oct 2013

5120-12-390-0633
Spanner Wrench

123900633
KV2023: RNCC: 3 | RNVC: 2

28 Sep 2012

5120-12-171-6853
Socket Head Screw Key

121716853
17DWN34: RNCC: 3 | RNVC: 2
97564: RNCC: 5 | RNVC: 2

3 Nov 1977

5120-12-315-7128
Combination Box And Open End Wrench

123157128
11M-38: RNCC: 3 | RNVC: 2
1B-38: RNCC: 3 | RNVC: 2
400-38: RNCC: 3 | RNVC: 2
1829322: RNCC: 5 | RNVC: 2
00400038082: RNCC: 5 | RNVC: 2
11-C-38: RNCC: 5 | RNVC: 9
11-N-38: RNCC: 5 | RNVC: 9
230014: RNCC: 5 | RNVC: 9
1B38: RNCC: 5 | RNVC: 9

23 Nov 1988

5120-12-133-3974
Screwdriver Bit

121333974
55Z5-64: RNCC: 3 | RNVC: 2
114451: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-308-0459
Retaining Ring Pliers

123080459
798: RNCC: 3 | RNVC: 2
52750: RNCC: 5 | RNVC: 2
5753770001: RNCC: 5 | RNVC: 2

25 Aug 1986

5120-12-126-2558
Pliers

121262558
NO PRIMARY REF 12-126-2558: RNCC: 3 | RNVC: 2
B200SDIN5236GERAUHT: RNCC: 5 | RNVC: 2
573A402: RNCC: 5 | RNVC: 9
5M8936-221-39: RNCC: 5 | RNVC: 9
106383: RNCC: 5 | RNVC: 9
2477B: RNCC: 5 | RNVC: 9
DIN5236-B200SGERAUHT: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-9211
Okular Zange

121909211
332104-8140.901: RNCC: 3 | RNVC: 2
4900144-14000: RNCC: 3 | RNVC: 2
332104-8140-901: RNCC: 5 | RNVC: 9
332104-8140.901: RNCC: 5 | RNVC: 9

23 Dec 1981

5120-12-181-7089
Abziehschraube

121817089
264-595: RNCC: 3 | RNVC: 2

12 Dec 1979

5120-12-364-7243
Socket Wrench Crowfoot Attachment

123647243
000589690300: RNCC: 3 | RNVC: 2

22 Oct 2004

5120-12-022-0287

5120-12-390-1304
Bearing Staking Installation Tool

123901304
437589154300: RNCC: 3 | RNVC: 2

9 Oct 2012

5120-12-334-3563
Seal Inserter

123343563
S52276: RNCC: 3 | RNVC: 2

29 Apr 1994

5120-12-172-8249
Torque Wrench Adapter

121728249
NO PRIMARY REF 12-172-8249: RNCC: 3 | RNVC: 2
58123641: RNCC: 5 | RNVC: 9
752-36-41: RNCC: 5 | RNVC: 9

22 Feb 1978

5120-12-150-0189
Einstampfvorrichtun

121500189
7443012V1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-127-7660
Torque Wrench

121277660
GR: RNCC: 3 | RNVC: 2
1826-59: RNCC: 5 | RNVC: 2
414-0173-01: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-163-6646
Spanner Wrench

121636646
26-21C1610P01: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-300-4865
Spanner Wrench

123004865
G005/111000: RNCC: 3 | RNVC: 2
G005/111000: RNCC: 5 | RNVC: 9

7 Aug 1984

5120-12-193-3887
Seal Inserter

121933887
601589106300: RNCC: 3 | RNVC: 2

19 Jul 1982

5120-12-390-8420
Bearing And Bushing Remover

123908420
F30372229: RNCC: 3 | RNVC: 2

19 Dec 2012

5120-12-368-8205
Ratchet Wrench

123688205
41140910-TCS: RNCC: 3 | RNVC: 2

25 Apr 2006

5120-12-380-2466
Hand Roller

123802466
125.489: RNCC: 3 | RNVC: 2
4128007: RNCC: 5 | RNVC: 2

9 Oct 2009

5120-12-363-2364
Bearing And Bushing Inserter

123632364
F30377365: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-140-9227
Spanner Wrench

121409227
4610: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-363-9053
Bearing And Bushing Inserter

123639053
T670P5001265: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-199-2828
Bearing And Bushing Inserter

121992828
44 12 40: RNCC: 3 | RNVC: 2
441240: RNCC: 5 | RNVC: 2
441240: RNCC: 5 | RNVC: 9

7 Apr 1984

5120-12-181-3538
Open End Wrench

121813538
DIN3114-50: RNCC: 2 | RNVC: 2
50DIN3114: RNCC: 5 | RNVC: 2

14 Nov 1979

5120-12-133-6187
Mechanical Puller

121336187
435-181: RNCC: 3 | RNVC: 2
S660-200-150: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-121-1183
Cross Tip Screwdriver

121211183
126030: RNCC: 3 | RNVC: 9
550VSMGR02/40: RNCC: 3 | RNVC: 9
350PRGRO2: RNCC: 5 | RNVC: 9
08780: RNCC: 5 | RNVC: 9
150PR-02/40: RNCC: 5 | RNVC: 9
150PRGR02: RNCC: 5 | RNVC: 9
350-PRGR02/40: RNCC: 5 | RNVC: 9
350PRGR02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-139-3086
Torque Wrench Multiplier

121393086
2364TD1000: RNCC: 3 | RNVC: 2
CVR-F362450017207: RNCC: 5 | RNVC: 2
CVR-F362450017207: RNCC: 5 | RNVC: 2
F30017207: RNCC: 5 | RNVC: 2
F362450017207: RNCC: 5 | RNVC: 2
0005891663: RNCC: 5 | RNVC: 9
091M03100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-373-7692
We Montierwerkzeug

123737692
F6276884: RNCC: 3 | RNVC: 2

5 Dec 2007

5120-12-350-1650
Mechanical Finger

123501650
464-630770.000: RNCC: 3 | RNVC: 2
464-630770.000: RNCC: 5 | RNVC: 9

23 Feb 2000

5120-12-091-2754

5120-12-041-6040

5120-12-385-4512
Mechanical Puller

123854512
F6557942: RNCC: 3 | RNVC: 2

6 Jun 2011

5120-12-005-0072

5120-12-362-6087
Mechanical Puller

123626087
4434382200: RNCC: 3 | RNVC: 2
SAF 4434382200: RNCC: 5 | RNVC: 2

11 Mar 2004

5120-12-154-6184
Monta Gewindestueck

121546184
23111-7199.21: RNCC: 2 | RNVC: 2
23111-7199.21: RNCC: 3 | RNVC: 2
23111-7199.21: RNCC: 5 | RNVC: 9
23111-7199.21: RNCC: 5 | RNVC: 9

3 Nov 1977

5120-12-322-3758
Socket Wrench

123223758
54.0070.145.03LV: RNCC: 2 | RNVC: 2
54.0070.145.03LV: RNCC: 5 | RNVC: 2

16 Aug 1990

5120-12-312-9350
Mechanical Finger

123129350
KDEP 2915: RNCC: 3 | RNVC: 2

19 Feb 1988

5120-12-135-8746
Haken

121358746
35-10-63: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-171-5367
Spanner Wrench

121715367
1238-07W1: RNCC: 3 | RNVC: 2
1238-07W1: RNCC: 5 | RNVC: 2
1238-07W1: RNCC: 5 | RNVC: 9

21 Oct 1977

5120-12-177-6253
Haltevorrichtung

121776253
UFG314-21: RNCC: 3 | RNVC: 2
UFG314-21: RNCC: 3 | RNVC: 9

9 Feb 1979

5120-12-121-4447
Socket Wrench Socket

121214447
NO PRIMARY REF 12-121-4447: RNCC: 3 | RNVC: 2
D18A40: RNCC: 5 | RNVC: 9
D18A40: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-168-0924
Spatula

121680924
DIN7216-A70: RNCC: 2 | RNVC: 2
A70DIN7216: RNCC: 5 | RNVC: 9
DIN7216A70: RNCC: 5 | RNVC: 9

14 Feb 1977

5120-12-178-7455
Socket Wrench Extension

121787455
23111-4637.00: RNCC: 2 | RNVC: 2
23111-4637.00: RNCC: 3 | RNVC: 2
23111-4637-00: RNCC: 5 | RNVC: 2
23111-4637-00: RNCC: 5 | RNVC: 9
23111-4637.00: RNCC: 5 | RNVC: 9
23111-4637-00: RNCC: 5 | RNVC: 9

14 May 1979

5120-12-379-7121
Torque Wrench

123797121
07147122: RNCC: 3 | RNVC: 2
7147122: RNCC: 3 | RNVC: 9
391416200106: RNCC: 6 | RNVC: 9

25 Aug 2009

5120-12-367-6340
Hand Hammer

123676340
46305: RNCC: 3 | RNVC: 2
00.75.23.54: RNCC: 5 | RNVC: 2

15 Sep 2005

5120-12-044-4898

5120-12-092-2278

5120-12-392-7277
Socket Wrench Crowfoot Attachment

123927277
SEWZG001: RNCC: 3 | RNVC: 2

2 Jul 2013

5120-12-315-0662
Hand Beading Tool

123150662
15368801: RNCC: 3 | RNVC: 2

13 Sep 1988

5120-12-369-0698
Socket Head Screw Key

123690698
500-270-08: RNCC: 3 | RNVC: 2
00.43.07.39: RNCC: 5 | RNVC: 2

18 May 2006

5120-12-171-2102
Splicing Sleeve Compressing Tool

121712102
NO PRIMARY REF 12-171-2102: RNCC: 3 | RNVC: 2
B1-1264: RNCC: 5 | RNVC: 9

16 Sep 1977

5120-12-161-3333
Schluessel

121613333
VG95211-ML-121613333: RNCC: 2 | RNVC: 2
160-88602: RNCC: 3 | RNVC: 2
160-88602: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-6428
Socket Wrench

123056428
DIN 3125-15: RNCC: 2 | RNVC: 9
4510016: RNCC: 3 | RNVC: 2
52164150: RNCC: 3 | RNVC: 9

28 Nov 1985

5120-12-176-8737
Flat Tip Screwdriver

121768737
8020-0-6X4-5X40: RNCC: 3 | RNVC: 9
510184-020: RNCC: 5 | RNVC: 2
060932.4.970.55: RNCC: 5 | RNVC: 2
131538: RNCC: 5 | RNVC: 2
205785: RNCC: 5 | RNVC: 9

20 Dec 1978

5120-12-173-5142
Spanner Wrench

121735142
009-017.418-010W2: RNCC: 3 | RNVC: 2
009-017-418-010W2: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-12-126-1420
Hand Rivet Set

121261420
NO PRIMARY REF 12-126-1420: RNCC: 3 | RNVC: 2
B9DIN6434: RNCC: 5 | RNVC: 9
DIN6434-B9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-311-6481
Socket Wrench

123116481
33-11/32: RNCC: 3 | RNVC: 2
12500A-11/32: RNCC: 3 | RNVC: 2
635 707: RNCC: 5 | RNVC: 2
43490022: RNCC: 5 | RNVC: 2
4510108: RNCC: 5 | RNVC: 9

30 Sep 1987

5120-12-369-7587
Mechanical Puller

123697587
904589003300: RNCC: 3 | RNVC: 2
7083666: RNCC: 5 | RNVC: 2

15 Aug 2006

5120-12-198-5061
Spanner Wrench

121985061
393489: RNCC: 3 | RNVC: 2

3 Feb 1984

5120-12-385-1026
Spanner Wrench

123851026
I010890: RNCC: 3 | RNVC: 2
4052063108908: RNCC: 5 | RNVC: 2

2 May 2011

5120-12-357-0259
Ge Montierwerkzeug

123570259
5206717: RNCC: 3 | RNVC: 2

25 Apr 2002

5120-12-343-3853
Bearing And Bushing Inserter And Remover

123433853
437589094300: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-368-1007
Swivel Knob Jeweler's Screwdriver

123681007
47510006-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-091-6447

5120-12-386-5173
Cyli Mounting Tool

123865173
F6781569: RNCC: 3 | RNVC: 2

7 Sep 2011

5120-12-389-5169
Torque Wrench

123895169
R810786: RNCC: 3 | RNVC: 2

17 Jul 2012

5120-12-336-5866
Montierdorn

123365866
0852 5015: RNCC: 3 | RNVC: 2
8525015: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-390-1207
Installation And Re

123901207
437589134300: RNCC: 3 | RNVC: 2

8 Oct 2012

5120-12-335-9623
Spanner Wrench

123359623
0851 3610: RNCC: 3 | RNVC: 2
8513610: RNCC: 5 | RNVC: 2

6 Oct 1994

5120-12-327-2727
Torque Wrench

123272727
131808: RNCC: 3 | RNVC: 2

3 Jan 1992

5120-12-363-8367
Bearing And Bushing Inserter

123638367
T671P5001116: RNCC: 3 | RNVC: 2

29 Jul 2004

5120-12-343-6908
Sheet Metalworking Dolly Block

123436908
10838: RNCC: 3 | RNVC: 2
70210003: RNCC: 5 | RNVC: 2

15 Jul 1997

5120-12-133-4533

5120-12-126-1402
Hand Rivet Set

121261402
DIN6435-B6: RNCC: 2 | RNVC: 2
585 006: RNCC: 3 | RNVC: 2
B6DIN6435: RNCC: 5 | RNVC: 2
251-6: RNCC: 5 | RNVC: 2
2552-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-336-7710
Screwdriver Bit

123367710
600-1,2X8: RNCC: 3 | RNVC: 2

21 Dec 1994

5120-12-349-3921
Mechanical Puller

123493921
2519-000000.000.0: RNCC: 2 | RNVC: 2
2519-000000.000.0: RNCC: 3 | RNVC: 2

9 Nov 1999

5120-12-390-8103
Carrier Socket

123908103
SK1018-992001.000.0: RNCC: 3 | RNVC: 2

13 Dec 2012

5120-12-145-4273
Vise Jaw Caps

121454273
NO PRIMARY REF 12-145-4273: RNCC: 3 | RNVC: 2
4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-335-4105
Mechanical Puller

123354105
0852 3061: RNCC: 3 | RNVC: 2
8523061: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-358-8687
Fixed Open End Wrench Set

123588687
96593414: RNCC: 3 | RNVC: 2

22 Nov 2002

5120-12-368-1970
Socket Wrench Socket

123681970
02410020-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-321-1672
Mechanical Puller

123211672
0852 3041: RNCC: 3 | RNVC: 2
8523041FC9569160: RNCC: 5 | RNVC: 2
8523041: RNCC: 5 | RNVC: 2

6 Apr 1990

5120-12-325-8115
Lager- Und Einsatz

123258115
5870057009: RNCC: 3 | RNVC: 2
790511277: RNCC: 5 | RNVC: 2
5870 057 009: RNCC: 5 | RNVC: 9
5870057009: RNCC: 5 | RNVC: 9

12 Jul 1991

5120-12-159-5791
Zentrier- Dorn

121595791
3145890161: RNCC: 3 | RNVC: 2
314589016100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-166-1961
Mechanical Puller

121661961
1X56136565: RNCC: 3 | RNVC: 2
8470237: RNCC: 5 | RNVC: 2
8207708: RNCC: 5 | RNVC: 2

12 Aug 1976

5120-12-197-3597
Mechanical Puller

121973597
4982042: RNCC: 3 | RNVC: 2

17 Oct 1983

5120-12-010-9656

5120-12-133-3687
Einsch Gewindedorn

121333687
799-181: RNCC: 3 | RNVC: 2
S529R1-8IN100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-175-2794
Manual Impact Wrench

121752794
NO PRIMARY REF 12-175-2794: RNCC: 3 | RNVC: 2
109980: RNCC: 5 | RNVC: 9
7860: RNCC: 5 | RNVC: 9
7860N: RNCC: 5 | RNVC: 9

6 Sep 1978

5120-12-342-1976
Cross Tip Screwdriver

123421976
815-559: RNCC: 3 | RNVC: 2

2 Jan 1997

5120-12-311-2551
Spanner Wrench

123112551
57478-645: RNCC: 3 | RNVC: 2
KB-57478-645: RNCC: 5 | RNVC: 2

11 Aug 1987

5120-12-183-9683
Socket Wrench Socket

121839683
A6700DM-11: RNCC: 3 | RNVC: 2
91619060: RNCC: 5 | RNVC: 2
6700DM11: RNCC: 5 | RNVC: 9

7 Jun 1980

5120-12-346-7890
Spanner Wrench

123467890
70660-405: RNCC: 3 | RNVC: 2

10 Sep 1998

5120-12-149-5862
Socket Wrench

121495862
NO PRIMARY REF 12-149-5862: RNCC: 3 | RNVC: 2
105199: RNCC: 5 | RNVC: 9
1937M19: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-313-3764
Mechanical Puller

123133764
1000025-861000: RNCC: 2 | RNVC: 2
7883227: RNCC: 3 | RNVC: 2
7883-227: RNCC: 5 | RNVC: 2

26 Mar 1988

5120-12-344-7920
Dreh Haltewerkzeug

123447920
99360322: RNCC: 3 | RNVC: 2

9 Dec 1997

5120-12-021-2463

5120-12-354-8819
Seal Inserter

123548819
1X54 183 725: RNCC: 3 | RNVC: 2
15006269: RNCC: 5 | RNVC: 2

31 Aug 2001

5120-12-126-1778

5120-12-364-3381
Socket Wrench Socket

123643381
02010019-TCS: RNCC: 3 | RNVC: 2

11 Sep 2004

5120-12-192-6680
Schluessel

121926680
212-663: RNCC: 3 | RNVC: 9

12 May 1982

5120-12-307-5106
Pliers

123075106
000589493700: RNCC: 3 | RNVC: 2
00589493700: RNCC: 5 | RNVC: 2

25 Jun 1986

5120-12-368-6625
Screwdriver Bit

123686625
3243-TX25: RNCC: 3 | RNVC: 2
00.45.21.59: RNCC: 5 | RNVC: 2

4 Apr 2006

5120-12-357-7742
Eindrueckwerkzeug

123577742
F30276145: RNCC: 3 | RNVC: 2

22 Jul 2002

5120-12-370-9265
Quick Adjusting Screw Clamp

123709265
G100H: RNCC: 3 | RNVC: 2
00.20.76.39: RNCC: 5 | RNVC: 2

17 Jan 2007

5120-12-328-3755
Hand Beading Tool

123283755
ZF 1X56 137246: RNCC: 3 | RNVC: 2
0694903: RNCC: 5 | RNVC: 2

12 May 1992

5120-12-141-2998
Hand Hammer

121412998
6407-60: RNCC: 3 | RNVC: 2
200-7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-192-3327
Open End Wrench

121923327
41-1180-2900.000.0: RNCC: 2 | RNVC: 2
41-1180-2900.000.0: RNCC: 3 | RNVC: 2
41-1180-2900.000.0: RNCC: 5 | RNVC: 9

15 Apr 1982

5120-12-363-7694
Electronic Equipment Alignment Tool

123637694
4845-1,8: RNCC: 3 | RNVC: 2
104-8700: RNCC: 5 | RNVC: 2
T4845 18: RNCC: 5 | RNVC: 2

22 Jul 2004

5120-12-171-9802
Abziehvorrichtung

121719802
354589003300: RNCC: 3 | RNVC: 2

5 Dec 1977

5120-12-357-0243
Driftpin

123570243
0008312-001: RNCC: 3 | RNVC: 2
0008312-001: RNCC: 5 | RNVC: 9

25 Apr 2002

5120-12-121-6878

5120-12-373-7747
Mechanical Puller Attachment

123737747
F30272093: RNCC: 3 | RNVC: 2

6 Dec 2007

5120-12-351-9572
Socket Head Screw Key

123519572
ISO2936-11: RNCC: 2 | RNVC: 2

20 Sep 2000

5120-12-333-9466
Spanner Wrench

123339466
3SB1902-0AE: RNCC: 3 | RNVC: 2

25 Feb 1994

5120-12-302-5722
Boerdelwer Einsatz

123025722
105-13141W5: RNCC: 3 | RNVC: 2
105-13141W4: RNCC: 5 | RNVC: 9

14 Jan 1985

5120-12-156-1552
Flat Tip Screwdriver

121561552
NM255-08: RNCC: 3 | RNVC: 2
JD5120-12-156-1552: RNCC: 5 | RNVC: 2
NM255-08: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-0201
Socket Wrench

121350201
NO PRIMARY REF 12-135-0201: RNCC: 3 | RNVC: 2
105386: RNCC: 5 | RNVC: 9
1945NKBM5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-4494
Screwdriver Bit

121294494
NO PRIMARY REF 12-129-4494: RNCC: 3 | RNVC: 2
10K2: RNCC: 5 | RNVC: 9
205915: RNCC: 5 | RNVC: 9
10K2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-352-1911
Socket Wrench Socket

123521911
TL5120-0132-E2: RNCC: 2 | RNVC: 2
50TX-E11: RNCC: 3 | RNVC: 2
03270011: RNCC: 5 | RNVC: 2

24 Oct 2000

5120-12-362-7154
Socket Wrench Handle

123627154
245/12-SPANNER: RNCC: 3 | RNVC: 2
24570003: RNCC: 5 | RNVC: 2

23 Mar 2004

5120-12-195-6866
Brechstan Aufnahme

121956866
25892-1120: RNCC: 2 | RNVC: 2
25892-1120: RNCC: 3 | RNVC: 2
25 892-1120: RNCC: 5 | RNVC: 9

28 Mar 1983

5120-12-391-0227
Ejecti Guide Plate

123910227
Y4341902: RNCC: 3 | RNVC: 2

16 Jan 2013

5120-12-162-6545
Montagevorrichtung

121626545
V507: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-022-8138

5120-12-196-7392
Mechanical Puller Attachment

121967392
1X56136417: RNCC: 3 | RNVC: 2
0535890: RNCC: 5 | RNVC: 2
535890: RNCC: 5 | RNVC: 9

9 Aug 1983

5120-12-167-9759
Open End Wrench

121679759
NO PRIMARY REF 12-167-9759: RNCC: 3 | RNVC: 2
8M5-5: RNCC: 5 | RNVC: 9
229377: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-345-5569
Bearing And Bushing Inserter

123455569
550589013300: RNCC: 3 | RNVC: 2
550 589 01 33-00: RNCC: 5 | RNVC: 2

31 Mar 1998

5120-12-343-6375
Pliers

123436375
217416: RNCC: 3 | RNVC: 2

10 Jul 1997

5120-12-021-2466

5120-12-321-6925
Brechstange Mit Nag

5120-12-329-3589
Pliers

123293589
2713RF: RNCC: 3 | RNVC: 2
147419: RNCC: 5 | RNVC: 2

12 Aug 1992

5120-12-381-5338
Spanner Wrench

123815338
T10025: RNCC: 3 | RNVC: 2

1 Mar 2010

5120-12-144-5578

5120-12-371-8804
Ge Montierwerkzeug

123718804
15010324: RNCC: 3 | RNVC: 2

24 May 2007

5120-12-198-3961
Box Wrench

121983961
DIN7444-42: RNCC: 2 | RNVC: 2
7444SW42: RNCC: 5 | RNVC: 2
42DIN7444: RNCC: 5 | RNVC: 2
7444MM42: RNCC: 5 | RNVC: 9
7444MM42: RNCC: 5 | RNVC: 9

24 Jan 1984

5120-12-133-3594
Open End Wrench

121333594
NO PRIMARY REF 12-133-3594: RNCC: 3 | RNVC: 2
105810: RNCC: 5 | RNVC: 9
1953M8X9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-197-6868
Socket Wrench Socket

121976868
C6491-00-01: RNCC: 3 | RNVC: 2
5600: RNCC: 5 | RNVC: 2
0535705: RNCC: 5 | RNVC: 2
535705: RNCC: 5 | RNVC: 9

14 Nov 1983

5120-12-329-9798
Stud Inserter

123299798
0851 0493: RNCC: 3 | RNVC: 2
8510493: RNCC: 5 | RNVC: 2

17 Oct 1992

5120-12-334-5213
Mechanical Puller Attachment

123345213
0852 0678.009: RNCC: 3 | RNVC: 2

19 May 1994

5120-12-364-5624
Open End Wrench

123645624
40032022-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-199-6639
Mechanical Puller Attachment

121996639
206589003300: RNCC: 3 | RNVC: 2

19 May 1984

5120-12-131-2824
Treibkissen

121312824
58-78A4: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-389-5309
Socket Head Screw Key

123895309
48560006-TCS: RNCC: 3 | RNVC: 2

18 Jul 2012

5120-12-342-0747
Box Wrench

123420747
DIN7447-21: RNCC: 2 | RNVC: 2

6 Dec 1996

5120-12-170-3988
Socket Wrench Crowfoot Attachment

121703988
1950M13: RNCC: 3 | RNVC: 2
440-13: RNCC: 3 | RNVC: 2
105575: RNCC: 5 | RNVC: 2
1950-M13: RNCC: 5 | RNVC: 2
01190013: RNCC: 5 | RNVC: 2
1055752: RNCC: 5 | RNVC: 2
1950M-13: RNCC: 5 | RNVC: 2
85-800-5953: RNCC: 6 | RNVC: 9

8 Jul 1977

5120-12-121-8263
Open End Wrench

121218263
NO PRIMARY REF 12-121-8263: RNCC: 3 | RNVC: 2
105048: RNCC: 5 | RNVC: 9
1932WM12X11: RNCC: 5 | RNVC: 9
00730: RNCC: 5 | RNVC: 9
1203110012: RNCC: 5 | RNVC: 9
330-12X11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-170-9623
Hand Vise

121709623
517115: RNCC: 3 | RNVC: 2
113-116: RNCC: 3 | RNVC: 2
864200-115X7: RNCC: 3 | RNVC: 2
51007115: RNCC: 5 | RNVC: 9
260115: RNCC: 5 | RNVC: 9
103070: RNCC: 5 | RNVC: 9
846A: RNCC: 5 | RNVC: 9

24 Aug 1977

5120-12-312-5355
Face Spanner Wrench Socket

123125355
123 589 01 07 00: RNCC: 3 | RNVC: 2
123589010700: RNCC: 5 | RNVC: 2

15 Jan 1988

5120-12-389-5010
Torque Wrench Adapter

123895010
R819947: RNCC: 3 | RNVC: 2

13 Jul 2012

5120-12-392-8906
Mechanical Puller Forcing Screw

123928906
L133M2801206: RNCC: 3 | RNVC: 2

19 Jul 2013

5120-12-175-6045

5120-12-322-3506
Socket Wrench

123223506
1945NB-M5: RNCC: 3 | RNVC: 2
105329: RNCC: 5 | RNVC: 2

14 Aug 1990

5120-12-178-6128
Montagewerkzeug

121786128
1W1451: RNCC: 3 | RNVC: 2
1W1451: RNCC: 5 | RNVC: 9

3 May 1979

5120-12-342-8695
Crimping Tool Die

123428695
R35: RNCC: 3 | RNVC: 2

10 Apr 1997

5120-12-151-6557
Hand Rivet Set

121516557
100199-1101W1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-091-2908

5120-12-314-9260
Screw Thread Insert Inserter

123149260
6100040.00: RNCC: 3 | RNVC: 2
601040: RNCC: 5 | RNVC: 2

27 Aug 1988

5120-12-194-4132
Flat Tip Screwdriver

121944132
1050-200X12: RNCC: 3 | RNVC: 2
660300-12: RNCC: 3 | RNVC: 2
330SK 2X12X200: RNCC: 3 | RNVC: 9
01437020080: RNCC: 5 | RNVC: 2
1437-200: RNCC: 5 | RNVC: 2
14370200: RNCC: 5 | RNVC: 2
07035: RNCC: 5 | RNVC: 9
66030-12: RNCC: 5 | RNVC: 9
330SK2X12: RNCC: 5 | RNVC: 9

3 Nov 1982

5120-12-194-0635
Socket Wrench Set

121940635
NO PRIMARY REF 12-194-0635: RNCC: 3 | RNVC: 2
50A/18/7/512: RNCC: 5 | RNVC: 9
96034110: RNCC: 5 | RNVC: 9

28 Sep 1982

5120-12-199-0060
Spanner Wrench

121990060
428-210 100.00.0: RNCC: 3 | RNVC: 2
428-210100.00.0: RNCC: 3 | RNVC: 2
428-210100-00-0: RNCC: 5 | RNVC: 2

20 Mar 1984

5120-12-317-7980
Hand Terminal Crimping Tool

123177980
72990-380: RNCC: 3 | RNVC: 2
729900-K05: RNCC: 3 | RNVC: 2
K 05: RNCC: 3 | RNVC: 2
72990-380: RNCC: 5 | RNVC: 9

12 May 1989

5120-12-194-6308
Open End Wrench

121946308
SK571/1: RNCC: 3 | RNVC: 2
SK571-1: RNCC: 5 | RNVC: 2

23 Nov 1982

5120-12-350-4812
Zentrier- Ring

123504812
26-21C1360G003P1: RNCC: 3 | RNVC: 2

5 Apr 2000

5120-12-370-4047
Box Wrench Set

123704047
96830165: RNCC: 3 | RNVC: 2

2 Nov 2006

5120-12-373-1707
Socket Head Screw Key Set

123731707
03878: RNCC: 3 | RNVC: 2
369 H7B: RNCC: 5 | RNVC: 2

5 Oct 2007

5120-12-348-0494
Socket Wrench

123480494
0705150405: RNCC: 3 | RNVC: 2
07 05 15 04 05: RNCC: 5 | RNVC: 2

31 Mar 1999

5120-12-041-5657

5120-12-301-7171

5120-12-189-1818
Bearing And Bushing Inserter

121891818
327589021500: RNCC: 3 | RNVC: 2

9 Sep 1981

5120-12-188-8809
Einpreszwerkzeug

121888809
406589004300: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-12-154-1517

5120-12-338-1890
Handwer Handschutz

123381890
200.1115: RNCC: 3 | RNVC: 2

1 Jun 1995

5120-12-195-0957
Aligning Punch

121950957
0852 2424: RNCC: 3 | RNVC: 2
8522424: RNCC: 5 | RNVC: 2

12 Jan 1983

5120-12-194-5624
Face Spanner Wrench Socket

121945624
403589000700: RNCC: 3 | RNVC: 2

15 Nov 1982

5120-12-123-4963
Hand Hammer

121234963
031A229: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-387-2587
Socket Wrench Socket

123872587
001.797: RNCC: 3 | RNVC: 2

21 Nov 2011

5120-12-189-4435
Socket Wrench

121894435
0005891409: RNCC: 3 | RNVC: 2
000589140900: RNCC: 3 | RNVC: 2

28 Sep 1981

5120-12-156-1573
Socket Wrench Socket

121561573
NM293-17: RNCC: 3 | RNVC: 2
NM293-17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-329-2129
Torque Wrench

123292129
2680: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-12-336-5845
Montierhuelse

123365845
0850 1077: RNCC: 3 | RNVC: 2
8501077: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-366-8981
Socket Head Screw Key

123668981
1004-19: RNCC: 3 | RNVC: 2

21 Jun 2005

5120-12-134-2735
Zylinder Haltering

121342735
016M09100: RNCC: 3 | RNVC: 2
VM76491: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-369-2738
Eindrueckwerkzeug

123692738
80996040229: RNCC: 3 | RNVC: 2
80.99604-0229: RNCC: 5 | RNVC: 2

13 Jun 2006

5120-12-345-3356
Bearing And Bushing Inserter

123453356
7419-798-004: RNCC: 3 | RNVC: 2

3 Mar 1998

5120-12-155-9512
Socket Wrench Socket

121559512
NM291-09: RNCC: 3 | RNVC: 2
NM291-09: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-179-9692
Gewindebolzen

121799692
142470-1: RNCC: 3 | RNVC: 2
80.99606-0097: RNCC: 5 | RNVC: 2
80996060097: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-384-8525
Saddler's Awl Haft

123848525
50.000.012: RNCC: 3 | RNVC: 2

5 Apr 2011

5120-12-333-6526
Torque Wrench

123336526
77655: RNCC: 3 | RNVC: 9
7425: RNCC: 5 | RNVC: 9

18 Jan 1994

5120-12-139-3030
Sch Zentrierstueck

121393030
8205893407: RNCC: 3 | RNVC: 2
023M04400: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-365-9154
Swivel Knob Jeweler's Screwdriver

123659154
T4880X 410: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-362-4724
Combination Box And Open End Wrench

123624724
54.0084.960.55: RNCC: 3 | RNVC: 2
13-21: RNCC: 5 | RNVC: 2

27 Feb 2004

5120-12-323-4099
Woven Cable Grip

123234099
01585: RNCC: 3 | RNVC: 2

23 Nov 1990

5120-12-193-0396
Box Wrench

121930396
123 589 00 03 00: RNCC: 3 | RNVC: 2
123589000300: RNCC: 3 | RNVC: 2

16 Jun 1982

5120-12-021-2678

5120-12-123-5032
Open End Wrench

121235032
NO PRIMARY REF 12-123-5032: RNCC: 3 | RNVC: 2
19X22DIN658: RNCC: 5 | RNVC: 9
DIN658-19X22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-8363
Drive Pin Punch

121748363
NM253-11: RNCC: 3 | RNVC: 2
NM253-11: RNCC: 5 | RNVC: 9

7 Aug 1978

5120-12-165-1602
Pliers

121651602
5801411-3137: RNCC: 3 | RNVC: 2
36560-001: RNCC: 3 | RNVC: 2
36560-001: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-324-5679
Hand Yoke Riveter

123245679
VN209: RNCC: 3 | RNVC: 2
MOV1-030615: RNCC: 5 | RNVC: 2

28 Feb 1991

5120-12-154-1033
Open End Box Wrench

121541033
CH2267-10: RNCC: 3 | RNVC: 2
839589080300: RNCC: 5 | RNVC: 2
CH2267-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-390-2376
Mechanical Puller

123902376
80996010172: RNCC: 3 | RNVC: 2
80.99601-0172: RNCC: 5 | RNVC: 2

19 Oct 2012

5120-12-191-9353
Niederhalter

121919353
NO PRIMARY REF 12-191-9353: RNCC: 3 | RNVC: 2
416200: RNCC: 5 | RNVC: 9

16 Mar 1982

5120-12-319-2296
Torque Wrench

123192296
NO PRIMARY REF 12-319-2296: RNCC: 3 | RNVC: 2
12182VDE: RNCC: 5 | RNVC: 9
55010005: RNCC: 5 | RNVC: 9

14 Sep 1989

5120-12-341-1807
Torque Wrench Adapter

123411807
1095.388254-01: RNCC: 3 | RNVC: 2

6 Aug 1996

5120-12-123-5174
Open End Wrench

121235174
1931Z11-16: RNCC: 3 | RNVC: 2
104980: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-159-7556
Open End Wrench

121597556
1918-039600: RNCC: 2 | RNVC: 2
1918-039600: RNCC: 3 | RNVC: 2
1918-039600: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-4365
Spatula

121744365
5499-220 MM: RNCC: 3 | RNVC: 9
EDIN7217: RNCC: 5 | RNVC: 9

29 Jun 1978

5120-12-174-8365
Flat Tip Screwdriver

121748365
NM254-02: RNCC: 3 | RNVC: 2
NM254-02: RNCC: 5 | RNVC: 9

7 Aug 1978

5120-12-190-3664
Open End Wrench

121903664
MKV1150/4501.01.02.04: RNCC: 3 | RNVC: 2

24 Nov 1981

5120-12-315-3202
Hyd Ausbauwerkzeug

123153202
4900153-31310-00-02: RNCC: 3 | RNVC: 2
4900153-31310-02: RNCC: 5 | RNVC: 2

12 Oct 1988

5120-12-126-2568
Typewriter Repair Pliers

121262568
NO PRIMARY REF 12-126-2568: RNCC: 3 | RNVC: 2
C20407A7A50: RNCC: 5 | RNVC: 9
C20407Z7A50: RNCC: 5 | RNVC: 9
425: RNCC: 5 | RNVC: 9
TFS49-99003: RNCC: 5 | RNVC: 9
W8D: RNCC: 5 | RNVC: 9
C20407-A7-A50: RNCC: 5 | RNVC: 9
C20407-Z7-A50: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-351-9571
Socket Head Screw Key

123519571
ISO2936-10: RNCC: 2 | RNVC: 2
07153145: RNCC: 3 | RNVC: 2
201-010: RNCC: 3 | RNVC: 2
ISO2936-10: RNCC: 5 | RNVC: 2
5200.102.080.042: RNCC: 5 | RNVC: 2
(241)I9008IS02936-10: RNCC: 5 | RNVC: 2

20 Sep 2000

5120-12-172-8942
Zeiger Abheber

121728942
4263132: RNCC: 3 | RNVC: 2
17080: RNCC: 5 | RNVC: 2

2 Mar 1978

5120-12-329-0383
Socket Head Screw Key

123290383
60815310: RNCC: 3 | RNVC: 2

11 Jul 1992

5120-12-177-6324
Spezial- Schluessel

121776324
261600: RNCC: 3 | RNVC: 9

9 Feb 1979

5120-12-382-6992
Socket Wrench Adapter

123826992
13030005-TCS: RNCC: 3 | RNVC: 2

27 Jul 2010

5120-12-133-4641

5120-12-320-8947
Mechanical Puller

123208947
62030000: RNCC: 3 | RNVC: 2

1 Mar 1990

5120-12-312-9578
Pin Inserter

123129578
318261: RNCC: 3 | RNVC: 2

22 Feb 1988

5120-12-327-1103
Hand Beading Tool

123271103
15358802: RNCC: 3 | RNVC: 2
153 588 02: RNCC: 5 | RNVC: 2

3 Dec 1991

5120-12-194-4041
Eindrueckwerkzeugsa

121944041
KDAL5003: RNCC: 3 | RNVC: 2

28 Oct 1982

5120-12-310-5399
Face Spanner Wrench Socket

123105399
80996030139: RNCC: 3 | RNVC: 2
80.99603.0139: RNCC: 5 | RNVC: 2

29 May 1987

5120-12-364-3117
Socket Wrench Handle

123643117
11060010-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-094-1305

5120-12-174-5562
Socket Wrench

121745562
140102: RNCC: 3 | RNVC: 9
6975: RNCC: 5 | RNVC: 9
2325: RNCC: 5 | RNVC: 9

10 Jul 1978

5120-12-327-4151
Craftsman's Tweezers

123274151
5517I: RNCC: 3 | RNVC: 2
5517I BAHCO BELZER: RNCC: 5 | RNVC: 2
157392: RNCC: 5 | RNVC: 2

21 Jan 1992

5120-12-362-2888
Torque Wrench

123622888
2445-MTT 30: RNCC: 3 | RNVC: 2
2445-MTT 30: RNCC: 5 | RNVC: 2

3 Feb 2004

5120-12-364-3380
Socket Wrench Socket

123643380
02010018-TCS: RNCC: 3 | RNVC: 2

11 Sep 2004

5120-12-338-2040
Slip Joint Pliers

123382040
8901200: RNCC: 3 | RNVC: 2
00.12.98.37: RNCC: 5 | RNVC: 2
89 01 200: RNCC: 5 | RNVC: 9

6 Jun 1995

5120-12-321-2168
Lager- Un Aufnahme

123212168
F6144897: RNCC: 3 | RNVC: 2
F601001144897: RNCC: 5 | RNVC: 2

19 Apr 1990

5120-12-392-7474
Open End Box Wrench

123927474
SEWZG018: RNCC: 3 | RNVC: 2

4 Jul 2013

5120-12-340-0107
Open End Wrench

123400107
768.903E-0000: RNCC: 3 | RNVC: 2

13 Feb 1996

5120-12-309-9776
Driftpin

123099776
P-896264-003: RNCC: 3 | RNVC: 2
P896264-003: RNCC: 5 | RNVC: 2

25 Mar 1987

5120-12-194-3542
Face Spanner Wrench Socket

121943542
D33.08140-6036: RNCC: 3 | RNVC: 2
D33-08140-6036: RNCC: 5 | RNVC: 2

26 Oct 1982

5120-12-173-9688
Drive Pin Punch

121739688
3644-150: RNCC: 3 | RNVC: 2
107476: RNCC: 5 | RNVC: 2

26 May 1978

5120-12-172-9115
Dorn

121729115
VG95211-ML-121729115: RNCC: 2 | RNVC: 2
1X56 136 653: RNCC: 3 | RNVC: 2
1X56136653: RNCC: 5 | RNVC: 9

2 Mar 1978

5120-12-173-7399
Cross Tip Screwdriver

121737399
8078L-1: RNCC: 3 | RNVC: 2
8078L1: RNCC: 3 | RNVC: 9
1344535: RNCC: 5 | RNVC: 2
3954518: RNCC: 5 | RNVC: 2
134453: RNCC: 5 | RNVC: 2

5 May 1978

5120-12-373-0795
Mechanical Puller

123730795
BWAC011: RNCC: 3 | RNVC: 2

25 Sep 2007

5120-12-171-9962
Retaining Ring Pliers

121719962
2466B1: RNCC: 3 | RNVC: 2
140678: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-163-0524
Socket Wrench

121630524
120030: RNCC: 3 | RNVC: 2
8207121: RNCC: 5 | RNVC: 2
8409279: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-384-7507
Shaf Mounting Tool

123847507
F6550798: RNCC: 3 | RNVC: 2

25 Mar 2011

5120-12-137-8332

5120-12-331-6051
Bearing And Bushing Inserter

123316051
80996040134: RNCC: 3 | RNVC: 2
80.99604.0134: RNCC: 5 | RNVC: 2
V1136: RNCC: 5 | RNVC: 2

27 May 1993

5120-12-347-1207
Torque Wrench Adapter

123471207
F30373585: RNCC: 3 | RNVC: 2

29 Oct 1998

5120-12-304-4153
Pliers

123044153
009-017.410-023W1: RNCC: 3 | RNVC: 2

16 Jul 1985

5120-12-172-5291
Spanner Wrench

121725291
773390: RNCC: 3 | RNVC: 9

23 Jan 1978

5120-12-126-1815
Rubber Mallet

121261815
574A322: RNCC: 3 | RNVC: 2
258: RNCC: 5 | RNVC: 9
258: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-324-0723
Socket Wrench Screwdriver Attachment

123240723
A6709M-8: RNCC: 3 | RNVC: 2
175471: RNCC: 5 | RNVC: 2

18 Jan 1991

5120-12-384-8308
Drift Punch

123848308
46.000.046: RNCC: 3 | RNVC: 2

1 Apr 2011

5120-12-360-3811
Screw Thread Insert Inserter

123603811
F30373636: RNCC: 3 | RNVC: 2

15 May 2003

5120-12-322-3761
Face Spanner Wrench Socket

123223761
R6822Z: RNCC: 3 | RNVC: 2
108930: RNCC: 5 | RNVC: 2
R6822Z: RNCC: 5 | RNVC: 2

16 Aug 1990

5120-12-364-1167
Verspannvorrichtung

123641167
T661P1002105: RNCC: 3 | RNVC: 2

21 Aug 2004

5120-12-146-9898
Open End Wrench

121469898
NM283-06: RNCC: 3 | RNVC: 2
NM283-06: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-380-9812
Crimping Tool Die

123809812
76Z-0-3-51: RNCC: 3 | RNVC: 2
22544757: RNCC: 5 | RNVC: 2
76Z-0-3-51: RNCC: 5 | RNVC: 2
22544757: RNCC: 5 | RNVC: 2

17 Dec 2009

5120-12-338-6317
Mechanical Puller Step Plate

123386317
7-637-1903-103: RNCC: 3 | RNVC: 2
7-637-1903-103: RNCC: 5 | RNVC: 9

7 Aug 1995

5120-12-376-4182
Socket Wrench Socket

123764182
40TX-E4: RNCC: 3 | RNVC: 2
6193880: RNCC: 3 | RNVC: 2
850-E4: RNCC: 3 | RNVC: 2
01270004: RNCC: 5 | RNVC: 2
TX 20 E4: RNCC: 5 | RNVC: 2
4010886619384: RNCC: 5 | RNVC: 2
TX 20 E4: RNCC: 5 | RNVC: 2
4010886619384: RNCC: 5 | RNVC: 2
6193880: RNCC: 5 | RNVC: 2
4000896036653: RNCC: 5 | RNVC: 2

25 Sep 2008

5120-12-304-0896
Socket Wrench Socket

123040896
TMU121: RNCC: 3 | RNVC: 2

10 Jun 1985

5120-12-367-1089
Fuehrungs- Platte

123671089
0907991: RNCC: 3 | RNVC: 2

11 Jul 2005

5120-12-194-6749

5120-12-126-2552
Piston Ring Expander

121262552
35-10-15: RNCC: 3 | RNVC: 2
FW208F1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-3373
Mechanical Puller

121263373
D0-08-43789: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-351-2767
Mechanical Puller Attachment

123512767
3099-00-171200: RNCC: 3 | RNVC: 2

10 Jul 2000

5120-12-120-5515
Clamp Base Bench Vise

121205515
TL5120-0122: RNCC: 2 | RNVC: 2
51036120: RNCC: 3 | RNVC: 2
LB/A: RNCC: 3 | RNVC: 2
8324-2: RNCC: 5 | RNVC: 9
47-2: RNCC: 5 | RNVC: 9
60DIN7202: RNCC: 5 | RNVC: 9
DIN7202-60: RNCC: 5 | RNVC: 9
A60 MIT BUEGEL: RNCC: 5 | RNVC: 9
5120-90250: RNCC: 6 | RNVC: 9
5120-90250: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-324-4467
Blindn Nietzugkopf

123244467
349305: RNCC: 3 | RNVC: 2

18 Feb 1991

5120-12-370-2873
Combination Box And Open End Wrench Set

123702873
96830006: RNCC: 3 | RNVC: 2

20 Oct 2006

5120-12-311-3352
Spanner Wrench

123113352
01TC34934: RNCC: 3 | RNVC: 2

19 Aug 1987

5120-12-343-6906
Sheet Metalworking Dolly Block

123436906
10835: RNCC: 3 | RNVC: 2
70210002: RNCC: 5 | RNVC: 2

15 Jul 1997

5120-12-023-0656

5120-12-373-4933
Socket Wrench Crowfoot Attachment

123734933
02211020: RNCC: 3 | RNVC: 2

8 Nov 2007

5120-12-337-6353
Socket Wrench

123376353
0976009102: RNCC: 3 | RNVC: 2
S000976009102000: RNCC: 5 | RNVC: 2

21 Mar 1995

5120-12-348-7180
Drive Pin Punch

123487180
F30378334: RNCC: 3 | RNVC: 2

10 Aug 1999

5120-12-194-9813
Mechanical Puller

121949813
1X56122227: RNCC: 3 | RNVC: 2

23 Dec 1982

5120-12-127-5650

5120-12-183-1602
Socket Wrench Extension

121831602
320-991017: RNCC: 3 | RNVC: 2

25 Mar 1980

5120-12-335-9632
Spanner Wrench

123359632
0851 9923: RNCC: 3 | RNVC: 2
8519923: RNCC: 5 | RNVC: 2

6 Oct 1994

5120-12-364-2332
Piston Inserter

123642332
F6783621: RNCC: 3 | RNVC: 2

2 Sep 2004

5120-12-363-2377
Dreh Haltewerkzeug

123632377
F6554885: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-094-1285

5120-12-328-7258
Bearing And Bushing Remover

123287258
F30278328: RNCC: 3 | RNVC: 2
F362800278328: RNCC: 5 | RNVC: 2

18 Jun 1992

5120-12-149-5873
Socket Wrench

121495873
NO PRIMARY REF 12-149-5873: RNCC: 3 | RNVC: 2
1941FM16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-7307
Einpreszwerkzeug

121767307
VG95211-ML-121767307: RNCC: 2 | RNVC: 2
105-42322W1: RNCC: 3 | RNVC: 2

15 Dec 1978

5120-12-364-5961
Socket Wrench Crowfoot Attachment

123645961
02190015-TCS: RNCC: 3 | RNVC: 2

13 Oct 2004

5120-12-354-6782
Tubing Pinch-Off Tool

123546782
BN102745: RNCC: 3 | RNVC: 2

15 Aug 2001

5120-12-371-3624
Fixed Open End Wrench Set

123713624
100S 12AF: RNCC: 3 | RNVC: 2
00.25.11.86: RNCC: 5 | RNVC: 2

20 Mar 2007

5120-12-041-2704

5120-12-184-4593
Seal Inserter

121844593
GLZ4611408: RNCC: 3 | RNVC: 2

24 Jul 1980

5120-12-147-1089
Spanner Wrench

121471089
6143574: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-092-2894

5120-12-364-3460
Combination Box And Open End Wrench

123643460
40094040-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-126-5461
Schluessel

121265461
3155890007: RNCC: 3 | RNVC: 2
315589000700: RNCC: 5 | RNVC: 2
315589000700: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-344-1063
Quick Adjusting Screw Clamp

123441063
TG100S12: RNCC: 3 | RNVC: 2

11 Sep 1997

5120-12-371-1828
Bearing Staking Installation Tool

123711828
960602: RNCC: 3 | RNVC: 2

26 Feb 2007

5120-12-324-9961
Socket Wrench Set

123249961
75-60-AF: RNCC: 3 | RNVC: 2
00075600083: RNCC: 5 | RNVC: 2
4487350015: RNCC: 5 | RNVC: 9
900AZN: RNCC: 5 | RNVC: 9

22 Apr 1991

5120-12-364-6474
Combination Box And Open End Wrench Set

123646474
5803912-302310.00: RNCC: 2 | RNVC: 2
5803912-302310.00: RNCC: 3 | RNVC: 2

19 Oct 2004

5120-12-176-6856
Dorn

121766856
424589001500: RNCC: 3 | RNVC: 2

13 Dec 1978

5120-12-157-0625
Socket Wrench Handle Bar

121570625
25159701404: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-137-9780

5120-12-181-9721
Dorn

121819721
VW133B: RNCC: 3 | RNVC: 9

28 Dec 1979

5120-12-010-9627

5120-12-389-5093
Torque Wrench Adapter

123895093
R809233: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-156-1554
Plier Wrench

121561554
NM484: RNCC: 3 | RNVC: 2
NM484: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-3665
Socket Wrench Handle Bar

121473665
WZ44: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-365-2922
Bearing And Bushing Inserter And Remover

123652922
8098 798 151: RNCC: 3 | RNVC: 2

16 Dec 2004

5120-12-192-3881
Seal Inserter

121923881
F30275785: RNCC: 3 | RNVC: 2
F361210275785: RNCC: 3 | RNVC: 2

20 Apr 1982

5120-12-153-8493
Socket Wrench Socket

121538493
CH1773-3: RNCC: 3 | RNVC: 2
5605890008/00: RNCC: 5 | RNVC: 2
560589000800: RNCC: 5 | RNVC: 2
CH1773-3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-7341
Zylinderbolzen

121767341
VG95211-ML-121767341: RNCC: 2 | RNVC: 2
105-42322W1.02: RNCC: 3 | RNVC: 2
105-42322W1-02: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-324-6951
Mechanical Puller

123246951
3201-750.07.70.000-000: RNCC: 3 | RNVC: 2
926787877: RNCC: 5 | RNVC: 2

18 Mar 1991

5120-12-193-5196
Lamp Extractor

121935196
NO PRIMARY REF 12-193-5196: RNCC: 3 | RNVC: 2
5L.8949.001.01: RNCC: 5 | RNVC: 2
FRST4: RNCC: 5 | RNVC: 9

29 Jul 1982

5120-12-187-1939
Pliers

121871939
JD5120-12-187-1939: RNCC: 3 | RNVC: 2
2660C: RNCC: 5 | RNVC: 9

11 Mar 1981

5120-12-128-9118
Spanner Wrench

121289118
1216 8556: RNCC: 3 | RNVC: 2
12168556: RNCC: 5 | RNVC: 9
6-420-9-690-001-5: RNCC: 5 | RNVC: 9
6.420.9.690.001.5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-367-6950
Rohrbiege Aufnahme

123676950
581180: RNCC: 3 | RNVC: 2
REMS581180: RNCC: 5 | RNVC: 2
1011581180: RNCC: 5 | RNVC: 2

27 Sep 2005

5120-12-362-5507
Socket Wrench

123625507
117 58 02 07 00: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-12-370-4663
Wire Pike

123704663
F6209: RNCC: 3 | RNVC: 2

10 Nov 2006

5120-12-372-6481
Flat Tip Screwdriver

123726481
59108902305: RNCC: 3 | RNVC: 2

8 Aug 2007

5120-12-337-7011
Socket Wrench

123377011
2876014001: RNCC: 3 | RNVC: 2
S002876014001000: RNCC: 5 | RNVC: 2

29 Mar 1995

5120-12-382-3790
Wrench Kit

123823790
CBD45465G01: RNCC: 3 | RNVC: 2

14 Jun 2010

5120-12-163-5262
Schluessel

121635262
60458000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-330-5947
Hand Beading Tool

123305947
15312401: RNCC: 3 | RNVC: 2
153 124 01: RNCC: 5 | RNVC: 2

13 Jan 1993

5120-12-167-9696
Spanner Wrench

121679696
1255-35500W1: RNCC: 3 | RNVC: 2
1255-35500W1: RNCC: 5 | RNVC: 2
1255-35500W1: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-328-5705
Dapping Punch

123285705
F30096498: RNCC: 3 | RNVC: 2
F361130096498: RNCC: 5 | RNVC: 2

3 Jun 1992

5120-12-317-4333
Cross Tip Screwdriver

123174333
08710: RNCC: 3 | RNVC: 9

6 Apr 1989

5120-12-002-0654

5120-12-132-2718
Jewelers' Pliers

121322718
NO PRIMARY REF 12-132-2718: RNCC: 3 | RNVC: 2
106818: RNCC: 5 | RNVC: 9
27871: RNCC: 5 | RNVC: 9
2787I: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-148-5395
Spanner Wrench

121485395
100155-070-210: RNCC: 2 | RNVC: 2
100155-070-210: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-197-0001
Drive Pin Punch

121970001
01TC32556: RNCC: 3 | RNVC: 2

8 Sep 1983

5120-12-312-3494
Mechanical Puller

123123494
KDEP2858: RNCC: 3 | RNVC: 2
KDEP 2858: RNCC: 5 | RNVC: 2

18 Dec 1987

5120-12-150-4288
Ausbauvorrichtung

121504288
837589113100: RNCC: 3 | RNVC: 2
8375891131: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-163-8905
Montagering

121638905
1X56136428: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-332-8083
Op Montierwerkzeug

123328083
532117-8071.911: RNCC: 3 | RNVC: 2
532117-8071.911: RNCC: 5 | RNVC: 9

22 Sep 1993

5120-12-343-8454
Bearing And Bushing Inserter

123438454
3434101400: RNCC: 3 | RNVC: 2

5 Aug 1997

5120-12-092-2266

5120-12-150-3960
Dorn

121503960
1X46106171: RNCC: 3 | RNVC: 2
V106171: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-383-8365
Combination Box And Open End Wrench Set

123838365
0130000C: RNCC: 3 | RNVC: 2

13 Dec 2010

5120-12-380-8941
Socket Wrench Socket

123808941
40DL-11: RNCC: 3 | RNVC: 2
01240011: RNCC: 5 | RNVC: 2

10 Dec 2009

5120-12-126-5558
Socket Wrench Handle Bar

121265558
4-51-042-4: RNCC: 3 | RNVC: 2
35-02-11: RNCC: 3 | RNVC: 2
451042: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-343-7090
Socket Wrench

123437090
4328-19: RNCC: 3 | RNVC: 2
43280019: RNCC: 5 | RNVC: 2

16 Jul 1997

5120-12-173-4215
Socket Wrench

121734215
DIN896-A12X13: RNCC: 2 | RNVC: 2
A12X13DIN896: RNCC: 5 | RNVC: 9

13 Apr 1978

5120-12-153-8487
Socket Wrench Socket

121538487
CH1773-4: RNCC: 3 | RNVC: 2
560589010800: RNCC: 5 | RNVC: 2
5605890108/00: RNCC: 5 | RNVC: 2
CH1773-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-3458
Mechanical Puller

121333458
CH1989-10NM: RNCC: 3 | RNVC: 2
1201 9467: RNCC: 5 | RNVC: 2
WA28445A: RNCC: 5 | RNVC: 2
CH1989-10NM: RNCC: 5 | RNVC: 9
A26-50-121: RNCC: 5 | RNVC: 9
WA28445A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-6808
Seal Inserter

123686808
313670: RNCC: 3 | RNVC: 2
0855-03-10-01/37: RNCC: 5 | RNVC: 2

6 Apr 2006

5120-12-334-9532
Open End Wrench

123349532
4900399-411350.05: RNCC: 2 | RNVC: 2
4900399-411350.05: RNCC: 3 | RNVC: 2

6 Jul 1994

5120-12-369-2740
Montierhuelse

123692740
80996060355: RNCC: 3 | RNVC: 2
80.99606-0355: RNCC: 5 | RNVC: 2

13 Jun 2006

5120-12-359-3717
Torque Wrench

123593717
AS565-1817A-01: RNCC: 3 | RNVC: 2

29 Jan 2003

5120-12-393-1910
Hose Remover

123931910
532-31847-1: RNCC: 3 | RNVC: 2
3041105: RNCC: 3 | RNVC: 2
03041105: RNCC: 5 | RNVC: 2

15 Aug 2013

5120-12-307-3763
Grommet Inserting Punch And Die

123073763
15A-25X15: RNCC: 3 | RNVC: 2
3497: RNCC: 5 | RNVC: 9

10 Jun 1986

5120-12-198-5807
Bearing And Bushing Inserter

121985807
5870048057: RNCC: 3 | RNVC: 2
790510677: RNCC: 5 | RNVC: 2
026044: RNCC: 5 | RNVC: 2
5870048057: RNCC: 5 | RNVC: 9

14 Feb 1984

5120-12-324-9229
Mitnehmersch Stift

123249229
15 502: RNCC: 3 | RNVC: 2

10 Apr 1991

5120-12-385-3285
Met Adjusting Tool

123853285
221.217: RNCC: 3 | RNVC: 2
11490220077: RNCC: 5 | RNVC: 2

24 May 2011

5120-12-126-5433
Nutmut Gegenhalter

121265433
4015890261: RNCC: 3 | RNVC: 2
4015890261: RNCC: 3 | RNVC: 9
401589026100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-5465
Spanner Wrench

121265465
3155890207: RNCC: 3 | RNVC: 2
315589020700: RNCC: 5 | RNVC: 2
315589020700: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-173-5046
Eindrueckvorrichtun

121735046
837589393300: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-12-384-7509
Screw Thread Insert Inserter

123847509
F30005127: RNCC: 3 | RNVC: 2

25 Mar 2011

5120-12-368-4463
Box Wrench

123684463
CBD32574P02: RNCC: 3 | RNVC: 2

13 Mar 2006

5120-12-127-4114
Mechanical Puller

121274114
30355710100008: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-174-2735
Pliers

121742735
1900TRL: RNCC: 3 | RNVC: 2

19 Jun 1978

5120-12-368-8067
Screwdriver Bit

123688067
08130027-TCS: RNCC: 3 | RNVC: 2

24 Apr 2006

5120-12-350-2570
Bl Ausbeulwerkzeug

123502570
024/1: RNCC: 3 | RNVC: 2
24/1: RNCC: 5 | RNVC: 2

8 Mar 2000

5120-12-305-6432
Socket Wrench

123056432
DIN 3125-16: RNCC: 2 | RNVC: 9
4510017: RNCC: 3 | RNVC: 2
52164160: RNCC: 3 | RNVC: 9

28 Nov 1985

5120-12-182-4701
Socket Wrench Crowfoot Attachment

121824701
NO PRIMARY REF 12-182-4701: RNCC: 3 | RNVC: 2
1951M36: RNCC: 5 | RNVC: 9

6 Feb 1980

5120-12-318-8881
Fuse Puller

123188881
8022: RNCC: 3 | RNVC: 9

23 Aug 1989

5120-12-365-1294
Spanner Wrench

123651294
0015382630: RNCC: 3 | RNVC: 2
M55.093.019: RNCC: 5 | RNVC: 2
(241)A4249M55.093.019: RNCC: 8 | RNVC: 2

1 Dec 2004

5120-12-364-5630
Open End Wrench

123645630
40033436-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-091-9908

5120-12-188-9521
Leit- Rolle

121889521
425589002500: RNCC: 3 | RNVC: 2

11 Aug 1981

5120-12-390-8710
Flat Tip Screwdriver

123908710
911.1186: RNCC: 3 | RNVC: 2

20 Dec 2012

5120-12-302-8892

5120-12-368-2533
Open End Wrench

123682533
40033032-TCS: RNCC: 3 | RNVC: 2

17 Jan 2006

5120-12-372-6304
Lifting Pneumatic Bag

123726304
00409R008: RNCC: 3 | RNVC: 2

7 Aug 2007

5120-12-358-2657
Screwdriver Bit

123582657
614787405: RNCC: 3 | RNVC: 2
614 787 405: RNCC: 5 | RNVC: 2

2 Oct 2002

5120-12-194-1738
Hyd Ausbauwerkzeug

121941738
3S55116-0000: RNCC: 3 | RNVC: 2
MAGERD 1616: RNCC: 5 | RNVC: 9

7 Oct 1982

5120-12-151-6615
Gehaeus Richthebel

121516615
WKW9009-0102V4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-164-8075
Offset Screwdriver

121648075
NO PRIMARY REF 12-164-8075: RNCC: 3 | RNVC: 2
106079: RNCC: 5 | RNVC: 9
2049-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-306-1392
Screwdriver Bit

123061392
NO PRIMARY REF 12-306-1392: RNCC: 3 | RNVC: 2
7809BS10: RNCC: 5 | RNVC: 9

30 Jan 1986

5120-12-380-2957
Machinist's Vise

123802957
100120: RNCC: 3 | RNVC: 2

16 Oct 2009

5120-12-347-9662
Bearing And Bushing Inserter

123479662
80996040198: RNCC: 3 | RNVC: 2
80.99604.0198: RNCC: 5 | RNVC: 2

17 Mar 1999

5120-12-133-3521
Box Wrench

121333521
1300M17X19: RNCC: 3 | RNVC: 2
103956: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-149-6883

5120-12-315-9865
Socket Wrench Set

123159865
1002: RNCC: 3 | RNVC: 2

13 Dec 1988

5120-12-370-9532
Pliers

123709532
3111160: RNCC: 3 | RNVC: 2
4003773016441: RNCC: 5 | RNVC: 2
00.15.82.30: RNCC: 5 | RNVC: 2

19 Jan 2007

5120-12-311-4759
Lamp Cap Extractor

123114759
3512 713 2514: RNCC: 3 | RNVC: 2
35127132514: RNCC: 5 | RNVC: 2
351271325140: RNCC: 5 | RNVC: 2

8 Sep 1987

5120-12-390-2387
Special Purpose Combination Wrench

123902387
3W961A: RNCC: 3 | RNVC: 2

19 Oct 2012

5120-12-124-2710
Untergestell

121242710
UU1000X1000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-090-1456

5120-12-312-3070
Lager- Und Einsatz

123123070
80996046002: RNCC: 3 | RNVC: 2
80.99604.6002: RNCC: 5 | RNVC: 2

15 Dec 1987

5120-12-365-9739
Combination Box And Open End Wrench

123659739
40482828-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-168-6380

5120-12-361-5320
Screwdriver Bit Set

123615320
2607018862: RNCC: 3 | RNVC: 2

14 Oct 2003

5120-12-366-8632
Socket Wrench Crowfoot Attachment

123668632
440MJ30: RNCC: 3 | RNVC: 2
02210030: RNCC: 5 | RNVC: 2
02210030: RNCC: 5 | RNVC: 2

16 Jun 2005

5120-12-328-3063
Spanner Wrench

123283063
5175-822: RNCC: 3 | RNVC: 2

6 May 1992

5120-12-153-5068
Montagestutzen

121535068
V0M015L: RNCC: 3 | RNVC: 2
V0RM0NTAGESTUTZEN15L: RNCC: 5 | RNVC: 2
909129405: RNCC: 5 | RNVC: 2
101738: RNCC: 5 | RNVC: 2
V0M015L: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-334-6760
Swivel Knob Jeweler's Screwdriver

123346760
TL5120-0111-13: RNCC: 2 | RNVC: 2
2125-0,19X0,8: RNCC: 5 | RNVC: 9
2125-0,20X0,8: RNCC: 5 | RNVC: 9

8 Jun 1994

5120-12-325-8116
Seal Inserter

123258116
5870048067: RNCC: 3 | RNVC: 2
790510777: RNCC: 5 | RNVC: 2
5870 048 067: RNCC: 5 | RNVC: 9
5870048067: RNCC: 5 | RNVC: 9

12 Jul 1991

5120-12-126-5504
Jack Elevating Block

121265504
5100239: RNCC: 2 | RNVC: 2
3045830080: RNCC: 5 | RNVC: 9
3045830080: RNCC: 5 | RNVC: 9

30 May 1969

Load More Results