What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 21 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 21 of 62

5120-12-163-6642
Einbauwerkzeug

121636642
26-21C1483G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-314-4792
Craftsman's Tweezers

123144792
71780: RNCC: 3 | RNVC: 2
29-SA: RNCC: 3 | RNVC: 2
727690: RNCC: 5 | RNVC: 2
727690-AM: RNCC: 5 | RNVC: 2
250A-10-1006: RNCC: 5 | RNVC: 2
250A-10-1006: RNCC: 5 | RNVC: 9
71780: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-12-362-4015
Socket Head Screw Key

123624015
T4881XESD15: RNCC: 3 | RNVC: 2

17 Feb 2004

5120-12-140-9230
Oelfueh Druckstueck

121409230
4621C: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-143-2613

5120-12-369-3303
Eindrueckwerkzeug

123693303
80996140026: RNCC: 3 | RNVC: 2
80.99614-0026: RNCC: 5 | RNVC: 2

22 Jun 2006

5120-12-180-4061
Socket Wrench

121804061
NO PRIMARY REF 12-180-4061: RNCC: 3 | RNVC: 2
700-2: RNCC: 5 | RNVC: 9

10 Sep 1979

5120-12-345-5617
Schluessel

123455617
030.06.0007: RNCC: 3 | RNVC: 2

31 Mar 1998

5120-12-094-1538

5120-12-380-4208
Mounting Sleeve

123804208
105-60356W1: RNCC: 3 | RNVC: 2

28 Oct 2009

5120-12-336-5202
Bearing And Bushing Remover

123365202
2-866-39791: RNCC: 3 | RNVC: 2
2-866-39791: RNCC: 5 | RNVC: 2

22 Nov 1994

5120-12-328-6478
Pliers

123286478
KDAW9995/24: RNCC: 3 | RNVC: 2
F30371299: RNCC: 5 | RNVC: 2
F362890371299: RNCC: 5 | RNVC: 2

11 Jun 1992

5120-12-126-3177
Hand Hammer Head

121263177
1936-500: RNCC: 3 | RNVC: 2
5207-500: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-374-6878
Mecha Ejector Tool

123746878
5075891015/00: RNCC: 3 | RNVC: 2

6 Mar 2008

5120-12-158-9735
Electronic Equipment Alignment Tool

121589735
700-4D: RNCC: 3 | RNVC: 2
1-903: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-371-9179
Tap And Reamer Wrench

123719179
10020: RNCC: 3 | RNVC: 2

30 May 2007

5120-12-342-8935
Face Spanner Wrench Socket

123428935
E.33.082.40-6468: RNCC: 3 | RNVC: 2

14 Apr 1997

5120-12-133-2703
Stanz- Stempelsatz

121332703
TL5120-0059-10: RNCC: 2 | RNVC: 2
109: RNCC: 3 | RNVC: 2
705201070: RNCC: 5 | RNVC: 2
STPLL13: RNCC: 5 | RNVC: 2
STPLL13: RNCC: 5 | RNVC: 9
109: RNCC: 5 | RNVC: 9
5120-0059-11: RNCC: 5 | RNVC: 9
5120-059-11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-163-6617
Dorn

121636617
26-21C1118G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-360-8741
Mechanical Puller

123608741
0854 1936: RNCC: 3 | RNVC: 2

18 Jul 2003

5120-12-170-5130
Trennvorrichtung

121705130
17-1: RNCC: 3 | RNVC: 2
17-1 KUKO: RNCC: 5 | RNVC: 9

18 Jul 1977

5120-12-326-0310
Lifting Pneumatic Bag Kit

123260310
S-1151: RNCC: 3 | RNVC: 2

31 Jul 1991

5120-12-314-4886
Hand Hammer

123144886
5140.A-0: RNCC: 3 | RNVC: 2

12 Jul 1988

5120-12-092-2296

5120-12-146-0416
Socket Wrench Handle Bar

121460416
6162492: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-4330

5120-12-368-1116
Jewelers' Pliers

123681116
65176120-TCS: RNCC: 3 | RNVC: 2

8 Dec 2005

5120-12-384-2429
Bar Replacing Tool

123842429
235641: RNCC: 3 | RNVC: 2
94549-700: RNCC: 5 | RNVC: 2
235641: RNCC: 5 | RNVC: 2
235641: RNCC: 5 | RNVC: 2
235641: RNCC: 5 | RNVC: 2

7 Feb 2011

5120-12-372-4443
Socket Wrench

123724443
41288903400: RNCC: 3 | RNVC: 2

17 Jul 2007

5120-12-196-7373
Seal Inserter

121967373
1X56097745: RNCC: 3 | RNVC: 2

9 Aug 1983

5120-12-393-7293
Spanner Wrench

123937293
10104350: RNCC: 3 | RNVC: 2

7 Oct 2013

5120-12-176-5137
Mechanical Puller

121765137
83091436056: RNCC: 3 | RNVC: 2
83.09143.6056: RNCC: 5 | RNVC: 2

5 Dec 1978

5120-12-323-4098
Woven Cable Grip

123234098
01584: RNCC: 3 | RNVC: 2

23 Nov 1990

5120-12-338-3928
Torque Wrench Adapter

123383928
6408: RNCC: 3 | RNVC: 2
6263400007: RNCC: 5 | RNVC: 2

3 Jul 1995

5120-12-182-0144
Schluesseleinsatz

121820144
5222-130.005: RNCC: 2 | RNVC: 2
009-515.130-005: RNCC: 2 | RNVC: 2
009-515.130-005: RNCC: 3 | RNVC: 2
009-515-130-005: RNCC: 5 | RNVC: 2
09-515-130-005: RNCC: 5 | RNVC: 2
5222-130-005: RNCC: 5 | RNVC: 2
5222-130.005: RNCC: 5 | RNVC: 9

7 Jan 1980

5120-12-195-9553
Spanner Wrench

121959553
537152-9108.000: RNCC: 3 | RNVC: 2
53 71 52-9108: RNCC: 5 | RNVC: 9
537152-9108: RNCC: 5 | RNVC: 9
537152-9108.000: RNCC: 5 | RNVC: 9

5 May 1983

5120-12-369-6711
Einsetz- Und Auszie

123696711
B7032689: RNCC: 3 | RNVC: 2

8 Aug 2006

5120-12-370-1699
Socket Head Screw Key

123701699
62906009007: RNCC: 3 | RNVC: 2

27 Sep 2006

5120-12-172-6846
Socket Wrench Handle

121726846
8816GK: RNCC: 3 | RNVC: 2
09115: RNCC: 5 | RNVC: 2
2635860008: RNCC: 5 | RNVC: 2
7710: RNCC: 5 | RNVC: 9
8816GK: RNCC: 5 | RNVC: 9
3093GRN: RNCC: 5 | RNVC: 9

13 Feb 1978

5120-12-328-3535
Socket Wrench Socket

123283535
F362600279252: RNCC: 3 | RNVC: 2
F30279252: RNCC: 5 | RNVC: 2
F3 6260 0279252: RNCC: 5 | RNVC: 2

8 May 1992

5120-12-365-7602
Socket Wrench Crowfoot Attachment

123657602
01490034-TCS: RNCC: 3 | RNVC: 2

1 Feb 2005

5120-12-319-4698
Lager- Und Einsatz

123194698
99374377: RNCC: 3 | RNVC: 2

4 Oct 1989

5120-12-181-7301
Aufziehvorrichtung

121817301
1X56136686: RNCC: 3 | RNVC: 2

12 Dec 1979

5120-12-364-2385
Bearing And Bushing Inserter

123642385
387589081500: RNCC: 3 | RNVC: 2

3 Sep 2004

5120-12-150-1841
Torque Wrench

121501841
NO PRIMARY REF 12-150-1841: RNCC: 3 | RNVC: 2
K756WAL: RNCC: 5 | RNVC: 9
5120-41: RNCC: 5 | RNVC: 9
5120-40302: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-333-5740
Montierhuelse

123335740
425589041400: RNCC: 3 | RNVC: 2
7083650: RNCC: 5 | RNVC: 2
425589041400: RNCC: 5 | RNVC: 9

6 Jan 1994

5120-12-393-9512
Cross Tip Screwdriver

123939512
27756: RNCC: 3 | RNVC: 2
311-PH0X100: RNCC: 5 | RNVC: 2

24 Oct 2013

5120-12-330-4475
Mechanical Puller Attachment

123304475
26-21C1623G01P23: RNCC: 3 | RNVC: 2

16 Dec 1992

5120-12-316-0275
Dreh Winkelscheibe

123160275
NO PRIMARY REF 12-316-0275: RNCC: 3 | RNVC: 2
8200-02: RNCC: 5 | RNVC: 9

15 Dec 1988

5120-12-324-5776
Dreh Haltewerkzeug

123245776
601589024000: RNCC: 3 | RNVC: 2

1 Mar 1991

5120-12-374-3575
Socket Wrench Socket

123743575
03010021-TCS: RNCC: 3 | RNVC: 2

11 Feb 2008

5120-12-022-0331

5120-12-364-6796
Socket Wrench Socket

123646796
03010028-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-332-0175
Socket Wrench Handle Bar

123320175
070510: RNCC: 3 | RNVC: 9

15 Jul 1993

5120-12-383-8345
Torque Wrench

123838345
705: RNCC: 3 | RNVC: 2

13 Dec 2010

5120-12-344-1136
Box Wrench

123441136
8300089: RNCC: 3 | RNVC: 2

15 Sep 1997

5120-12-192-8397
Montagewerkzeug

121928397
1121-60911W1: RNCC: 3 | RNVC: 2

26 May 1982

5120-12-383-1874
Seal Inserter

123831874
F30274310: RNCC: 3 | RNVC: 2

23 Sep 2010

5120-12-171-3423
Manual Impact Wrench

121713423
4060: RNCC: 3 | RNVC: 2
05073460001: RNCC: 3 | RNVC: 2
2351: RNCC: 3 | RNVC: 9
2351/15: RNCC: 5 | RNVC: 2
2091/15: RNCC: 5 | RNVC: 2
4439350003: RNCC: 5 | RNVC: 9
73460: RNCC: 5 | RNVC: 9

30 Sep 1977

5120-12-185-7859
Auszieher

121857859
C407-A6-A1: RNCC: 2 | RNVC: 2
C407-A6-A1: RNCC: 3 | RNVC: 2
C 5791 998: RNCC: 5 | RNVC: 2
C 5791 998: RNCC: 5 | RNVC: 2
C407A6A1: RNCC: 5 | RNVC: 9

30 Oct 1980

5120-12-135-9096
Wrecking Bar

121359096
NO PRIMARY REF 12-135-9096: RNCC: 3 | RNVC: 2
5180-0165-55: RNCC: 5 | RNVC: 2
5180-0165 FIG 1: RNCC: 5 | RNVC: 9
5180-0165FIG1: RNCC: 5 | RNVC: 9
5180-165 FIG 1: RNCC: 5 | RNVC: 9
5180-165-55: RNCC: 5 | RNVC: 9
5180-165FIG1: RNCC: 5 | RNVC: 9
5120-17372: RNCC: 6 | RNVC: 9
5120-17372: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-170-4738
Huelse

121704738
99366650: RNCC: 3 | RNVC: 2
120620: RNCC: 3 | RNVC: 2
8470063: RNCC: 5 | RNVC: 2
141308: RNCC: 5 | RNVC: 2
8207123: RNCC: 5 | RNVC: 2

14 Jul 1977

5120-12-152-5607

5120-12-393-6515
Socket Wrench Screwdriver Attachment

123936515
2003503: RNCC: 3 | RNVC: 2
4010886876428: RNCC: 5 | RNVC: 2
IN 32 L 14-155: RNCC: 5 | RNVC: 2
2003503: RNCC: 5 | RNVC: 2
4010886876428: RNCC: 5 | RNVC: 2
IN 32 L 14-155: RNCC: 5 | RNVC: 2

30 Sep 2013

5120-12-139-3113

5120-12-364-3471
Combination Box And Open End Wrench

123643471
40081313-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-368-2339
Bearing And Bushing Remover

123682339
262757: RNCC: 3 | RNVC: 2
262757: RNCC: 5 | RNVC: 2

12 Jan 2006

5120-12-362-1319
Vise Jaw Caps

123621319
10845: RNCC: 3 | RNVC: 2

13 Jan 2004

5120-12-330-3463
Full Tracked Vehicle Track Connecting Fixture

123303463
2653-990930.00: RNCC: 2 | RNVC: 2
2653-990930.00: RNCC: 3 | RNVC: 2

4 Dec 1992

5120-12-370-9180
Flat Tip Screwdriver

123709180
64504: RNCC: 3 | RNVC: 2
4001002645042: RNCC: 5 | RNVC: 2
01.71.84.15: RNCC: 5 | RNVC: 2

16 Jan 2007

5120-12-163-6091
Einbauwerkzeug

121636091
105-31702W8: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-134-2628
Aus- Und Einbauvorr

121342628
038M00700: RNCC: 3 | RNVC: 2
VM53114: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-148-2504
Montierhuelse

121482504
4891033: RNCC: 3 | RNVC: 2
2810018: RNCC: 5 | RNVC: 2
02965962: RNCC: 5 | RNVC: 2
83091400019: RNCC: 5 | RNVC: 2
2810-018: RNCC: 5 | RNVC: 9
2965962ED5165-86: RNCC: 5 | RNVC: 9
489103: RNCC: 5 | RNVC: 9
83.09140-0019: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1309
Blacksmith's Bottom Fuller

121261309
NO PRIMARY REF 12-126-1309: RNCC: 3 | RNVC: 2
B25DIN7443: RNCC: 5 | RNVC: 9
24-25: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-343-7083
Socket Wrench

123437083
4328-12: RNCC: 3 | RNVC: 2
43280012: RNCC: 5 | RNVC: 2

16 Jul 1997

5120-12-176-1330
Socket Head Screw Key

121761330
C1997M8: RNCC: 3 | RNVC: 2
148547: RNCC: 5 | RNVC: 2
907808: RNCC: 5 | RNVC: 9
C1997M8MM: RNCC: 6 | RNVC: 9

9 Nov 1978

5120-12-363-1748
Sp Montierwerkzeug

123631748
092037774: RNCC: 3 | RNVC: 2

8 May 2004

5120-12-370-4191
Retaining Ring Pliers Set

123704191
96650004: RNCC: 3 | RNVC: 2

6 Nov 2006

5120-12-338-6316
Mechanical Puller Step Plate

123386316
7-637-1901-102: RNCC: 3 | RNVC: 2
7-637-1901-102: RNCC: 5 | RNVC: 9

7 Aug 1995

5120-12-178-9188
Tragegriff

121789188
3951-21300-05: RNCC: 2 | RNVC: 2

25 May 1979

5120-12-390-1231
Mechanical Puller

123901231
SK1337-990100.001.0: RNCC: 3 | RNVC: 2

8 Oct 2012

5120-12-123-5949
Socket Wrench Crowfoot Attachment

121235949
NO PRIMARY REF 12-123-5949: RNCC: 3 | RNVC: 2
1950Z1-7-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-8130
Chain Type Ratchet Lever Puller

121908130
EAN050548: RNCC: 3 | RNVC: 2
5120121908130: RNCC: 5 | RNVC: 2
446900000: RNCC: 5 | RNVC: 2
KN21108-0,75-2: RNCC: 5 | RNVC: 2
446900000: RNCC: 5 | RNVC: 9
TVA3950-2-155-001-1.1.2: RNCC: 5 | RNVC: 9
KN21108: RNCC: 5 | RNVC: 9

16 Dec 1981

5120-12-094-0356

5120-12-091-2910

5120-12-313-6931

5120-12-196-2349
Face Spanner Wrench Socket

121962349
01TC32030: RNCC: 3 | RNVC: 2

15 Jun 1983

5120-12-328-6978
Seal Inserter

123286978
F30276905: RNCC: 3 | RNVC: 2

16 Jun 1992

5120-12-041-5945

5120-12-126-5975
Clamp Base Bench Vise

121265975
651A301: RNCC: 3 | RNVC: 2
5216: RNCC: 5 | RNVC: 2
31: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-8675

5120-12-026-7421

5120-12-181-3078
Socket Wrench Set

121813078
1040: RNCC: 3 | RNVC: 2

14 Nov 1979

5120-12-370-4080
Open End Box Wrench Set

123704080
96838171: RNCC: 3 | RNVC: 2

3 Nov 2006

5120-12-133-3880
Combination Box And Open End Wrench

121333880
87AF3-4: RNCC: 3 | RNVC: 2
1952Z3-4: RNCC: 3 | RNVC: 2
1B-3/4: RNCC: 3 | RNVC: 2
14A3-4: RNCC: 3 | RNVC: 2
40504040: RNCC: 5 | RNVC: 2
87AF3/4: RNCC: 5 | RNVC: 2
105756: RNCC: 5 | RNVC: 2
6006010: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-333-4787
Piston Inserter

123334787
9108510041: RNCC: 3 | RNVC: 2

22 Dec 1993

5120-12-167-1560
Socket Wrench

121671560
14021-15001W3: RNCC: 3 | RNVC: 2

25 Nov 1976

5120-12-182-1224
Rohr

121821224
5230-200-3: RNCC: 2 | RNVC: 2
W2358-30-3: RNCC: 2 | RNVC: 2
W2358-30-3: RNCC: 3 | RNVC: 2
5230-200-3: RNCC: 5 | RNVC: 2

14 Jan 1980

5120-12-166-3115
Flat Tip Screwdriver

121663115
8000-6-150: RNCC: 3 | RNVC: 2
8000-6X150: RNCC: 3 | RNVC: 2
131477: RNCC: 5 | RNVC: 2
1314774: RNCC: 5 | RNVC: 2
1121198L00: RNCC: 5 | RNVC: 2
8000-1X6X150: RNCC: 5 | RNVC: 9
149-6: RNCC: 5 | RNVC: 9

23 Jul 1976

5120-12-364-2839
Socket Head Screw Key

123642839
05023105001: RNCC: 3 | RNVC: 2
354-2,0X75: RNCC: 5 | RNVC: 2
023105: RNCC: 5 | RNVC: 9

7 Sep 2004

5120-12-329-1630
Mater Saug- Griff

123291630
600.0: RNCC: 3 | RNVC: 2
VERIBOR 600-0 40KG: RNCC: 5 | RNVC: 2
VERIBOR 600-0 40KG: RNCC: 5 | RNVC: 2
954/18474: RNCC: 5 | RNVC: 2

22 Jul 1992

5120-12-351-4403
Retaining Ring Installation Tool

123514403
7672 798 001: RNCC: 3 | RNVC: 2

26 Jul 2000

5120-12-332-6129
Spanner Wrench

123326129
532113-8115.905: RNCC: 3 | RNVC: 2
532113-8115.905: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-372-7550
Spatula

123727550
5/8: RNCC: 3 | RNVC: 2

17 Aug 2007

5120-12-364-0833
Drift Punch

123640833
711589031500: RNCC: 3 | RNVC: 2

19 Aug 2004

5120-12-390-0847
Lamp Extractor

123900847
611009013: RNCC: 3 | RNVC: 2
61.1009013: RNCC: 5 | RNVC: 2

2 Oct 2012

5120-12-340-9388
Flat Tip Screwdriver

123409388
3055/4: RNCC: 3 | RNVC: 2
42753: RNCC: 5 | RNVC: 2

9 Jul 1996

5120-12-093-7222

5120-12-325-1589
Hand Terminal Crimping Tool

123251589
1237-809: RNCC: 3 | RNVC: 2
DTCT: RNCC: 3 | RNVC: 2
1237-809: RNCC: 5 | RNVC: 9
DTCT: RNCC: 5 | RNVC: 9

8 May 1991

5120-12-024-1255

5120-12-141-3030
Socket Wrench

121413030
NO PRIMARY REF 12-141-3030: RNCC: 3 | RNVC: 2
590-5-32IN125LG: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-372-8011
Trowel

123728011
748 008 00: RNCC: 3 | RNVC: 2
02.33.55.75: RNCC: 5 | RNVC: 2

23 Aug 2007

5120-12-199-7893

5120-12-331-4859
Socket Head Screw Key

123314859
VS8179G041: RNCC: 2 | RNVC: 2
VS8179G041: RNCC: 3 | RNVC: 2
VS8179G041: RNCC: 5 | RNVC: 9

10 May 1993

5120-12-092-2251

5120-12-355-4985
Dreh Haltewerkzeug

123554985
5555147: RNCC: 3 | RNVC: 2

20 Nov 2001

5120-12-133-3644
Open End Wrench

121333644
NO PRIMARY REF 12-133-3644: RNCC: 3 | RNVC: 2
105838: RNCC: 5 | RNVC: 9
1953Z25-32X13-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-333-5671
Seal Inserter

123335671
1842001: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-341-3920
Mechanical Puller

123413920
1213620013/2: RNCC: 3 | RNVC: 2
DRUCK NR.214,MAI 94 PN5.7: RNCC: 5 | RNVC: 9

30 Aug 1996

5120-12-193-1901
Socket Wrench Adapter

121931901
150797: RNCC: 3 | RNVC: 2

29 Jun 1982

5120-12-175-4844
Electric Melting Pot

121754844
ZWST30: RNCC: 3 | RNVC: 2

19 Sep 1978

5120-12-392-6747
Torque Wrench Adapter

123926747
CTP40302G001: RNCC: 3 | RNVC: 2

27 Jun 2013

5120-12-123-5186
Open End Wrench

121235186
894-7-8: RNCC: 3 | RNVC: 2
228303: RNCC: 5 | RNVC: 9
610-7-8: RNCC: 5 | RNVC: 9
610-7-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-380-7591
Socket Wrench

123807591
155: RNCC: 3 | RNVC: 2
000029: RNCC: 5 | RNVC: 2
4003315063070: RNCC: 5 | RNVC: 2

26 Nov 2009

5120-12-193-6659

5120-12-196-7637
Mechanical Puller

121967637
1120-31547W2: RNCC: 3 | RNVC: 2

15 Aug 1983

5120-12-193-0237
Montagewerkzeug

121930237
CH 1772/2 NM: RNCC: 3 | RNVC: 2
CH1772-2NM: RNCC: 5 | RNVC: 2
CH 1772/2 NM: RNCC: 5 | RNVC: 9
CH1772-2NM: RNCC: 5 | RNVC: 9

15 Jun 1982

5120-12-127-4110
Ausdruecker

121274110
68031660101008: RNCC: 3 | RNVC: 9
6803166010008: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-188-2606
Hole Sheet Metal Holder

121882606
2072K52: RNCC: 3 | RNVC: 2

22 Jun 1981

5120-12-186-7563
Flat Tip Screwdriver

121867563
3040-5: RNCC: 3 | RNVC: 2
42543: RNCC: 5 | RNVC: 2

2 Feb 1981

5120-12-177-5657
Okular Zange

121775657
700105-9002W2: RNCC: 3 | RNVC: 2
700105-9002W2: RNCC: 5 | RNVC: 9

7 Feb 1979

5120-12-305-2512
Bearing And Bushing Inserter

123052512
6796949W11: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-363-8857
Bearing And Bushing Inserter

123638857
T670P5001222: RNCC: 3 | RNVC: 2

3 Aug 2004

5120-12-358-3629
Ratchet Wrench

123583629
71425109: RNCC: 3 | RNVC: 2

14 Oct 2002

5120-12-375-0505
Flat Tip Screwdriver

123750505
52732550: RNCC: 3 | RNVC: 2
X00E53500013: RNCC: 5 | RNVC: 2

16 Apr 2008

5120-12-317-8211
Spanner Wrench

123178211
7158801: RNCC: 3 | RNVC: 2

17 May 1989

5120-12-358-1812
Rohr- Zange

123581812
75-10: RNCC: 3 | RNVC: 2
00.39.69.69: RNCC: 5 | RNVC: 2

24 Sep 2002

5120-12-327-1176
Face Spanner Wrench Socket

123271176
393589000700: RNCC: 3 | RNVC: 2

3 Dec 1991

5120-12-129-1383

5120-12-349-7294
Flat Tip Screwdriver

123497294
01430015080: RNCC: 3 | RNVC: 2
4720-3: RNCC: 3 | RNVC: 2
47201055: RNCC: 5 | RNVC: 2

4 Jan 2000

5120-12-302-4262

5120-12-317-1505
Lager- Un Aufnahme

123171505
1000042-192730: RNCC: 3 | RNVC: 2

14 Mar 1989

5120-12-339-1123
Piston Inserter

123391123
5870 651 042: RNCC: 3 | RNVC: 2
141.5870.651042: RNCC: 5 | RNVC: 2

11 Oct 1995

5120-12-183-0988
Huelse

121830988
4190439: RNCC: 3 | RNVC: 2

20 Mar 1980

5120-12-159-5792
Zentrier- Dorn

121595792
3125890061: RNCC: 3 | RNVC: 2
312589006100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-309-2842
Mechanical Puller Attachment

123092842
824128-3000: RNCC: 3 | RNVC: 2

9 Jan 1987

5120-12-364-5620
Open End Box Wrench

123645620
41081821-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-188-3890
Einstell- Ring

121883890
83091436121: RNCC: 3 | RNVC: 2

6 Jul 1981

5120-12-390-2679
Mechanical Puller Attachment

123902679
F6375395: RNCC: 3 | RNVC: 2

24 Oct 2012

5120-12-163-6606
Dorn

121636606
26-21C1078P011: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-180-0994
Torque Wrench Adapter

121800994
VG95211-ML-121800994: RNCC: 2 | RNVC: 2
P-895137-407: RNCC: 3 | RNVC: 2
P895137-407: RNCC: 5 | RNVC: 2
MAGERD 3018: RNCC: 5 | RNVC: 9

20 Aug 1979

5120-12-309-8126
Zentrier- Ring

123098126
4.124-Z2: RNCC: 3 | RNVC: 9
4.124-Z2/DN80: RNCC: 5 | RNVC: 9

5 Mar 1987

5120-12-341-6184
Sheet Metalworking Stake

123416184
157-1500: RNCC: 3 | RNVC: 2
157001500: RNCC: 5 | RNVC: 2

2 Oct 1996

5120-12-359-3842
Socket Wrench Set

123593842
41-0010-M: RNCC: 3 | RNVC: 2
00041001083: RNCC: 5 | RNVC: 2

30 Jan 2003

5120-12-185-3868
Socket Wrench Handle

121853868
23290-268151: RNCC: 3 | RNVC: 2
23290-268151: RNCC: 5 | RNVC: 2

3 Oct 1980

5120-12-123-5854

5120-12-339-4908
Elektron Auszieher

123394908
81668180001: RNCC: 3 | RNVC: 2

28 Nov 1995

5120-12-321-7857
Bearing And Bushing Remover

123217857
42582-T600: RNCC: 3 | RNVC: 2

26 Jun 1990

5120-12-368-5751
Bearing And Bushing Inserter Set

123685751
KVP00161: RNCC: 3 | RNVC: 2

27 Mar 2006

5120-12-163-5260
Abziehvorrichtung

121635260
60425400: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-389-3642
Sc Abklemmwerkzeug

123893642
12901: RNCC: 3 | RNVC: 2

26 Jun 2012

5120-12-364-7224
Torque Wrench Adapter

123647224
5583594: RNCC: 3 | RNVC: 2
(241)A42495583594: RNCC: 8 | RNVC: 2
5583594: RNCC: 8 | RNVC: 2

22 Oct 2004

5120-12-314-1942
Hyd Einbauwerkzeug

123141942
0852 3781: RNCC: 3 | RNVC: 2
8523781: RNCC: 5 | RNVC: 2
MAGERD 1127: RNCC: 5 | RNVC: 9

16 Jun 1988

5120-12-166-5290
Spanner Wrench

121665290
K4187-0000-02: RNCC: 3 | RNVC: 9
K4166: RNCC: 5 | RNVC: 9

16 Sep 1976

5120-12-183-1605
Torque Wrench

121831605
NO PRIMARY REF 12-183-1605: RNCC: 3 | RNVC: 2
750RAT05: RNCC: 5 | RNVC: 9

25 Mar 1980

5120-12-149-6174
Open End Wrench

121496174
NO PRIMARY REF 12-149-6174: RNCC: 3 | RNVC: 2
104883: RNCC: 5 | RNVC: 9
1930M19X22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-350-2554
Quick Adjusting Screw Clamp

123502554
319/11: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-123-5915
Socket Wrench Extension

121235915
NO PRIMARY REF 12-123-5915: RNCC: 3 | RNVC: 2
110684: RNCC: 5 | RNVC: 9
8960: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-162-6546
Kraftvervielfacher

121626546
83091956001: RNCC: 3 | RNVC: 2
V417: RNCC: 3 | RNVC: 2
83.09195-6001: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-178-4498
Mechanical Puller

121784498
55030040: RNCC: 3 | RNVC: 9

20 Apr 1979

5120-12-170-9757
Flat Tip Screwdriver

121709757
9710-2: RNCC: 3 | RNVC: 9
143774: RNCC: 5 | RNVC: 2
9710-2-0-6X4-5X90: RNCC: 5 | RNVC: 9

26 Aug 1977

5120-12-367-2711
Spanner Wrench

123672711
S010I30A1001: RNCC: 3 | RNVC: 2

27 Jul 2005

5120-12-361-5768
Electrical Contact Remover

123615768
80996060598: RNCC: 3 | RNVC: 2

20 Oct 2003

5120-12-364-3450
Socket Wrench Adapter

123643450
13030002-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-191-4590
Ausdrueckwerkzeug

121914590
2178-9960-000: RNCC: 3 | RNVC: 2
2178-9960-000: RNCC: 5 | RNVC: 9

3 Feb 1982

5120-12-196-7397
We Haltevorrichtung

121967397
1X56136583: RNCC: 3 | RNVC: 2
80996220028: RNCC: 5 | RNVC: 2
80.99622-0028: RNCC: 5 | RNVC: 2

9 Aug 1983

5120-12-377-2983
Trench Brace

123772983
063405: RNCC: 3 | RNVC: 2

5 Jan 2009

5120-12-189-4139
Blasting Cap Crimper

121894139
3001: RNCC: 3 | RNVC: 9

24 Sep 1981

5120-12-145-7294
Open End Wrench

121457294
100109-9400.20: RNCC: 2 | RNVC: 2
100109-9400-20: RNCC: 3 | RNVC: 2
100109-9400.20: RNCC: 3 | RNVC: 2
31980: RNCC: 5 | RNVC: 2
100109-9400-20: RNCC: 5 | RNVC: 2
100109-9400-20: RNCC: 5 | RNVC: 9
100109-9400-20: RNCC: 5 | RNVC: 9
100109-9400-20: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-379-0769
Screwdriver Bit

123790769
D0117782-001: RNCC: 3 | RNVC: 2
D0117782 000: RNCC: 5 | RNVC: 2

22 Jun 2009

5120-12-189-7506
Spezial- Schluessel

121897506
009-082.200-000: RNCC: 2 | RNVC: 2
4900137-350000: RNCC: 2 | RNVC: 2
009-082.200-000: RNCC: 3 | RNVC: 2
009-082.200: RNCC: 5 | RNVC: 2
4900137-350000: RNCC: 5 | RNVC: 9

21 Oct 1981

5120-12-195-1796
Box Wrench

121951796
DIN7447-14: RNCC: 2 | RNVC: 2
161414: RNCC: 3 | RNVC: 2
61740VDE14: RNCC: 3 | RNVC: 2
9514-14: RNCC: 3 | RNVC: 2
61740VDE14: RNCC: 5 | RNVC: 9
2VDE14: RNCC: 5 | RNVC: 9

20 Jan 1983

5120-12-197-9002
Einstel Schluessel

121979002
1000126-002300: RNCC: 2 | RNVC: 2
8PE 122 037-02: RNCC: 3 | RNVC: 2
SK-C1112: RNCC: 5 | RNVC: 2
080F64500: RNCC: 5 | RNVC: 2
122037-02: RNCC: 5 | RNVC: 2
8PE122037-02: RNCC: 5 | RNVC: 9

1 Dec 1983

5120-12-381-8976
Socket Wrench Handle Bar

123818976
77781: RNCC: 3 | RNVC: 2

15 Apr 2010

5120-12-092-4436

5120-12-364-4737
Socket Wrench Crowfoot Attachment

123644737
02210027-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-173-7400
Cross Tip Screwdriver

121737400
TL5120-0105-270: RNCC: 2 | RNVC: 2
153-2X250: RNCC: 3 | RNVC: 2
00116 2: RNCC: 5 | RNVC: 2
TK-KG12-5120-331-270: RNCC: 5 | RNVC: 9
TK5120-331-270: RNCC: 5 | RNVC: 9
8078L-2: RNCC: 5 | RNVC: 9
5739690002: RNCC: 5 | RNVC: 9
134454: RNCC: 5 | RNVC: 9
835LG-PH2: RNCC: 5 | RNVC: 9

5 May 1978

5120-12-341-6454
Torque Wrench

123416454
8570-10: RNCC: 3 | RNVC: 2
52248030: RNCC: 5 | RNVC: 2
52248-030: RNCC: 5 | RNVC: 9

9 Oct 1996

5120-12-167-9552
Spanner Wrench

121679552
12709-22400W1: RNCC: 2 | RNVC: 2
335912-9017.000: RNCC: 3 | RNVC: 2
12709-22400W1: RNCC: 5 | RNVC: 2
12709-22400W1: RNCC: 5 | RNVC: 2
335912-9017.000: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-337-0171
Torque Wrench

123370171
R810786: RNCC: 3 | RNVC: 2
9-2-HOF: RNCC: 5 | RNVC: 2
90002 HOF: RNCC: 5 | RNVC: 2

11 Jan 1995

5120-12-182-4160
Torque Wrench

121824160
DSG6: RNCC: 3 | RNVC: 2

30 Jan 1980

5120-12-312-2696
Mechanical Puller

123122696
80996010105: RNCC: 3 | RNVC: 2
80.99601.0105: RNCC: 5 | RNVC: 2

11 Dec 1987

5120-12-129-7728

5120-12-135-7492

5120-12-303-9951
Piston Inserter

123039951
0400 2417: RNCC: 3 | RNVC: 2
4002417: RNCC: 5 | RNVC: 2

29 May 1985

5120-12-161-9233
Ein- Und Ausbauvorr

121619233
169101103: RNCC: 3 | RNVC: 2
3532280KZ7101-86: RNCC: 3 | RNVC: 2
D169101103: RNCC: 5 | RNVC: 2
03532280: RNCC: 5 | RNVC: 9
3532280KZ7101-86: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-4319
Einbauwerkz Spindel

121474319
01500606020: RNCC: 3 | RNVC: 2
01556060010: RNCC: 5 | RNVC: 9
UD106: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-3541
Socket Wrench Socket

121943541
D33.08140-6035: RNCC: 3 | RNVC: 2
D33-08140-6035: RNCC: 5 | RNVC: 2

26 Oct 1982

5120-12-328-6462
Seal Inserter

123286462
F30370328: RNCC: 3 | RNVC: 2
F361160370328: RNCC: 5 | RNVC: 2

11 Jun 1992

5120-12-365-5394
Ratchet Screwdriver

123655394
18120000-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-345-3591
Mechanical Puller

123453591
F0 098288: RNCC: 3 | RNVC: 2

5 Mar 1998

5120-12-010-5227

5120-12-120-6762

5120-12-330-8542
Socket Wrench Handle Bar

123308542
27D: RNCC: 3 | RNVC: 2
622710: RNCC: 5 | RNVC: 2

16 Feb 1993

5120-12-368-8755
Socket Wrench Socket

123688755
770-LTXE20: RNCC: 3 | RNVC: 2
00.50.47.03: RNCC: 5 | RNVC: 2

3 May 2006

5120-12-376-0562
Open End Wrench

123760562
6585880: RNCC: 3 | RNVC: 2
4010886658581: RNCC: 5 | RNVC: 2
6585880: RNCC: 5 | RNVC: 2
895 14X15: RNCC: 5 | RNVC: 2
895 14X15: RNCC: 5 | RNVC: 2

7 Aug 2008

5120-12-134-2746
Socket Wrench

121342746
027M06700: RNCC: 3 | RNVC: 2
027M08700: RNCC: 5 | RNVC: 2
244005: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-150-3944
Screwdriver Bit

121503944
1X46104937: RNCC: 3 | RNVC: 2
V104937: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-385-5568
Bearing And Bushing Inserter

123855568
F30279978: RNCC: 3 | RNVC: 2

15 Jun 2011

5120-12-345-3740
Box Wrench

123453740
F3 0277070: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-190-2217
Socket Wrench

121902217
131530: RNCC: 3 | RNVC: 2

12 Nov 1981

5120-12-393-7602
Spanner Wrench

123937602
10112688: RNCC: 3 | RNVC: 2

9 Oct 2013

5120-12-390-2070
Bearing And Bushing Inserter

123902070
F30372734: RNCC: 3 | RNVC: 2

17 Oct 2012

5120-12-181-7404
Montagevorrichtung

121817404
3551998: RNCC: 3 | RNVC: 2

14 Dec 1979

5120-12-383-6935
Mechanical Puller

123836935
1X56.095.067: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-12-173-5115
Ausbauwerkzeug

121735115
532008G12W1: RNCC: 3 | RNVC: 2
532008G12W1: RNCC: 5 | RNVC: 2
532008G12W1: RNCC: 5 | RNVC: 9
532008G12W1: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-12-342-6111
Crimping Tool Die

123426111
VG95236T11AC001: RNCC: 2 | RNVC: 2
MRP0857: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-094-0337

5120-12-389-5376
Socket Wrench Crowfoot Attachment

123895376
02500034-TCS: RNCC: 3 | RNVC: 2

18 Jul 2012

5120-12-194-9616
Aufspann- Platte

121949616
1X56136499: RNCC: 3 | RNVC: 2

22 Dec 1982

5120-12-005-0089

5120-12-387-6848
Bearing And Bushing Remover

123876848
F6557190: RNCC: 3 | RNVC: 2

24 Jan 2012

5120-12-181-5086
Eindrueckvorrichtun

121815086
141010: RNCC: 3 | RNVC: 2
4681: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-364-6131
Socket Wrench Crowfoot Attachment

123646131
02190019-TCS: RNCC: 3 | RNVC: 2

14 Oct 2004

5120-12-358-2656
Screwdriver Bit

123582656
614787305: RNCC: 3 | RNVC: 2
614 787 305: RNCC: 5 | RNVC: 2

2 Oct 2002

5120-12-302-4184
Spindelheb Spindel

123024184
NO PRIMARY REF 12-302-4184: RNCC: 3 | RNVC: 2
M/5609/2/4: RNCC: 5 | RNVC: 9
M/5609/24: RNCC: 5 | RNVC: 9

28 Dec 1984

5120-12-156-1569
Socket Wrench Socket

121561569
NM293-13: RNCC: 3 | RNVC: 2
NM293-13: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-349-0143
Flat Tip Screwdriver Set

123490143
8030-7T: RNCC: 3 | RNVC: 2

14 Sep 1999

5120-12-384-0075
Dreh Winkelscheibe

123840075
7098052: RNCC: 3 | RNVC: 2

11 Jan 2011

5120-12-157-2038
Abzieher

121572038
2166800: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-311-0215
Socket Wrench Socket

123110215
387589020700: RNCC: 3 | RNVC: 2

17 Jul 1987

5120-12-343-8785
Mechanical Puller

123438785
2240-60: RNCC: 3 | RNVC: 2
02240006060: RNCC: 5 | RNVC: 2

8 Aug 1997

5120-12-385-7482
Hand Hammer

123857482
I002301: RNCC: 3 | RNVC: 2

6 Jul 2011

5120-12-198-6758
Pa Montierwerkzeug

121986758
201.1235: RNCC: 3 | RNVC: 2

17 Feb 1984

5120-12-360-4960
Drift Pin Set

123604960
CBD30032G01: RNCC: 3 | RNVC: 2

27 May 2003

5120-12-305-2874
Torque Wrench Adapter

123052874
01TC34824: RNCC: 3 | RNVC: 2

17 Oct 1985

5120-12-153-4608
Blindnie Mundstueck

121534608
4-17: RNCC: 3 | RNVC: 2
GES4-17: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-314-2379
Oe Stanz- Stempel

123142379
1500036: RNCC: 3 | RNVC: 2
15-36: RNCC: 5 | RNVC: 9
18836-2: RNCC: 5 | RNVC: 9

21 Jun 1988

5120-12-164-8981
Abzieh- Huelse

121648981
23305-264131.00.0: RNCC: 2 | RNVC: 2
23305-264131-00-0: RNCC: 5 | RNVC: 2
23305-264131-00-0: RNCC: 5 | RNVC: 9
23305-264131.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-4351
Open End Wrench

121744351
TL5120-0101-130: RNCC: 2 | RNVC: 2
8-12: RNCC: 3 | RNVC: 2
440-12: RNCC: 3 | RNVC: 2
12-12: RNCC: 3 | RNVC: 2
1203110027: RNCC: 5 | RNVC: 2
40061212: RNCC: 5 | RNVC: 2
52010130: RNCC: 5 | RNVC: 9
TK-KG55-5120-354-130: RNCC: 5 | RNVC: 9
TK5120-354-130: RNCC: 5 | RNVC: 9

29 Jun 1978

5120-12-370-2853
Fuse Puller

123702853
2218202: RNCC: 3 | RNVC: 2

19 Oct 2006

5120-12-146-7590
Aufdrueck- Huelse

121467590
92010206: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-360-5806
El Montierwerkzeug

123605806
5275380430: RNCC: 3 | RNVC: 2

11 Jun 2003

5120-12-303-2305
Socket Wrench

123032305
33BPN14: RNCC: 3 | RNVC: 9

7 Mar 1985

5120-12-365-7820
Craftsman's Tweezers

123657820
T2385: RNCC: 3 | RNVC: 2

2 Feb 2005

5120-12-387-5175
Mounting Sleeve

123875175
3756600111: RNCC: 3 | RNVC: 2

4 Jan 2012

5120-12-393-0009
Screwdriver Bit Set And Handle

123930009
05057135001: RNCC: 3 | RNVC: 2

30 Jul 2013

5120-12-323-4893
Mechanical Puller Attachment

123234893
01TC35344: RNCC: 3 | RNVC: 2

30 Nov 1990

5120-12-178-4474
Hand Tube Bender

121784474
278200: RNCC: 3 | RNVC: 2
53939010: RNCC: 3 | RNVC: 9
57542010: RNCC: 5 | RNVC: 2
6251.780.005.001: RNCC: 5 | RNVC: 2

20 Apr 1979

5120-12-360-0134
Electrical Contact Remover

123600134
VG95236T04CA003: RNCC: 2 | RNVC: 2

27 Mar 2003

5120-12-314-1922
Sp Montierwerkzeug

123141922
272.337 787: RNCC: 2 | RNVC: 2
272.337 787: RNCC: 3 | RNVC: 2

15 Jun 1988

5120-12-358-8449
Mechanical Puller

123588449
J0433782D311-000A1-039: RNCC: 3 | RNVC: 2

21 Nov 2002

5120-12-187-6635
Face Spanner Wrench Socket

121876635
30AM026: RNCC: 3 | RNVC: 2

24 Apr 1981

5120-12-131-7751

5120-12-336-5502

5120-12-126-6573
Piston Ring Compressor

121266573
7155725: RNCC: 3 | RNVC: 2
2475: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-369-7494
Bearing And Bushing Inserter And Remover

123697494
718589006100: RNCC: 3 | RNVC: 2
7083664: RNCC: 5 | RNVC: 2

15 Aug 2006

5120-12-355-3225
Socket Wrench

123553225
5555123: RNCC: 3 | RNVC: 2

31 Oct 2001

5120-12-326-5301
Bearing And Bushing Inserter

123265301
8471085: RNCC: 3 | RNVC: 2

1 Oct 1991

5120-12-367-1422
Seal Inserter

123671422
F30377930: RNCC: 3 | RNVC: 2

12 Jul 2005

5120-12-135-5979

5120-12-300-3531
Bearing And Bushing Inserter

123003531
406589026100: RNCC: 3 | RNVC: 2

26 Jul 1984

5120-12-317-1475
Crimping Tool Die

123171475
300455457: RNCC: 3 | RNVC: 2

14 Mar 1989

5120-12-181-5072
Socket Wrench Adapter

121815072
120060: RNCC: 3 | RNVC: 2
4672E: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-141-5565
Schluessel

121415565
50020550: RNCC: 3 | RNVC: 2
50020550: RNCC: 5 | RNVC: 9
50020550: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-6872
Abziehvorrichtung

121816872
VW176: RNCC: 3 | RNVC: 9

10 Dec 1979

5120-12-385-2689
Flat Tip Screwdriver

123852689
50.000.153: RNCC: 3 | RNVC: 2

16 May 2011

5120-12-357-7353
Bearing And Bushing Inserter

123577353
F30276330: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-389-5444
Open End Wrench

123895444
40463434-TCS: RNCC: 3 | RNVC: 2

19 Jul 2012

5120-12-135-6206
Box Wrench

121356206
518589160800: RNCC: 3 | RNVC: 2
5185891608: RNCC: 3 | RNVC: 2
026M00200: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-140-9210
Dorn

121409210
4237: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-363-9541
Bearing And Bushing Inserter

123639541
T671P5002102: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-364-4756
Grommet Inserting Punch And Die

123644756
1612213: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-126-2523
Screwdriver Bit

121262523
DIN8320-0,3X2KLINGE: RNCC: 2 | RNVC: 2
0-3X2DIN8320KLINGE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-1160
Pliers

121461160
NM481-02: RNCC: 3 | RNVC: 2
586-3184: RNCC: 5 | RNVC: 2
586-3184: RNCC: 5 | RNVC: 2
NM481-02: RNCC: 5 | RNVC: 9
586-3184: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-5793
Torque Wrench Adapter

121775793
UHN304-42: RNCC: 3 | RNVC: 2
UHN304-42: RNCC: 5 | RNVC: 9

7 Feb 1979

5120-12-130-4459
Marlinespike

121304459
TL5120-029-A: RNCC: 2 | RNVC: 2
5120-0029ITEMA: RNCC: 5 | RNVC: 9
5120-029ITEMA: RNCC: 5 | RNVC: 9
TL5120-0029ITEMA: RNCC: 5 | RNVC: 9
TL5120-029: RNCC: 5 | RNVC: 9
TL5120-029A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-1892
Spatula

121471892
NM265-04: RNCC: 3 | RNVC: 2
NM265-04: RNCC: 5 | RNVC: 2
NM265-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-314-5035
Pliers

123145035
7590: RNCC: 3 | RNVC: 2
7590: RNCC: 5 | RNVC: 9

14 Jul 1988

5120-12-092-2260

5120-12-322-3742
Open End Wrench

123223742
980008: RNCC: 3 | RNVC: 2

16 Aug 1990

5120-12-177-0291
Mechanical Puller

121770291
261650: RNCC: 3 | RNVC: 9

8 Jan 1979

5120-12-157-0032
Spann- Ring

121570032
4647A: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-390-6519
Spanner Wrench

123906519
7125088: RNCC: 3 | RNVC: 2

30 Nov 2012

5120-12-367-0186
Face Spanner Wrench Socket

123670186
SW5020G004: RNCC: 3 | RNVC: 2

29 Jun 2005

5120-12-331-0527
Duese Reiniger

123310527
3460188: RNCC: 3 | RNVC: 2

17 Mar 1993

5120-12-384-1699
Blind Riveter Nosepiece

123841699
7252156: RNCC: 3 | RNVC: 2

28 Jan 2011

5120-12-126-1784

5120-12-391-0560
Mechanical Puller Forcing Screw

123910560
F6781531: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-12-363-9703
Bearing And Bushing Inserter

123639703
T671P5002241: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-368-1020
Socket Head Screw Key Set

123681020
96432601-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-305-2431
Spanner Wrench

123052431
335934-9011.000: RNCC: 3 | RNVC: 2
335934-9011.000: RNCC: 5 | RNVC: 2
335934-9011.000: RNCC: 5 | RNVC: 9

11 Oct 1985

5120-12-142-0261
Battery Terminal Lifter-Scraper

121420261
042E226: RNCC: 3 | RNVC: 2
106487: RNCC: 5 | RNVC: 9
2560: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-336-5101
Bearing And Bushing Inserter

123365101
0852 2276: RNCC: 3 | RNVC: 2
8522276: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-025-8801

5120-12-337-0174
Socket Wrench Set

123370174
96514150: RNCC: 3 | RNVC: 2
1000: RNCC: 3 | RNVC: 2
4489350001: RNCC: 5 | RNVC: 2

11 Jan 1995

5120-12-357-6289
Mechanical Puller

123576289
F6341184: RNCC: 3 | RNVC: 2

8 Jul 2002

5120-12-306-7672
Brenner Schluessel

5120-12-324-2489
Socket Wrench Set

123242489
6400M/6T: RNCC: 3 | RNVC: 2
157309: RNCC: 5 | RNVC: 2

31 Jan 1991

5120-12-364-9576
Socket Wrench

123649576
T4840XESD40: RNCC: 3 | RNVC: 2

18 Nov 2004

5120-12-387-1924
Rotating Members Aligning Tool

123871924
F6782999: RNCC: 3 | RNVC: 2

14 Nov 2011

5120-12-149-5869
Socket Wrench

121495869
NO PRIMARY REF 12-149-5869: RNCC: 3 | RNVC: 2
105130: RNCC: 5 | RNVC: 9
1936E1-4X5-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-361-2201
Flat Tip Screwdriver

123612201
10-00 000.24: RNCC: 3 | RNVC: 2

4 Sep 2003

5120-12-382-0289
Open End Wrench

123820289
22-42921-017: RNCC: 3 | RNVC: 2

29 Apr 2010

5120-12-155-9404
Screwdriver Bit

121559404
NM304-33: RNCC: 3 | RNVC: 2
NM304-33: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-163-6643
Ein- Und Ausbauwerk

121636643
26-21C1485P010: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-134-8964
Socket Wrench

121348964
NO PRIMARY REF 12-134-8964: RNCC: 3 | RNVC: 2
1009910-0074: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-198-7828
Einstel Schluessel

121987828
1000151-901000.01: RNCC: 2 | RNVC: 2
1000151-901000.01: RNCC: 3 | RNVC: 2

27 Feb 1984

5120-12-320-4834
Spanner Wrench

123204834
23190013: RNCC: 3 | RNVC: 9

18 Jan 1990

5120-12-308-8319
Seal Inserter

123088319
80996170132: RNCC: 3 | RNVC: 2
80.99617.0132: RNCC: 5 | RNVC: 2

21 Nov 1986

5120-12-312-2456
Mechanical Puller

123122456
1106 890 4501: RNCC: 3 | RNVC: 2

8 Dec 1987

5120-12-355-4998
Montierdorn

123554998
5559299: RNCC: 3 | RNVC: 2

20 Nov 2001

5120-12-010-9651

5120-12-325-2348
Pliers

123252348
14195: RNCC: 3 | RNVC: 2
115.02: RNCC: 5 | RNVC: 9

21 May 1991

5120-12-358-7762
Spanner Wrench

123587762
80996030043: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-143-3037
Schluessel

121433037
RELWZ40A: RNCC: 3 | RNVC: 2
RELWZ40A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-332-9805
Bearing And Bushing Inserter

123329805
312589081500: RNCC: 3 | RNVC: 2

18 Oct 1993

5120-12-180-1000
Socket Wrench Attachment Universal Joint

121801000
01TC30026: RNCC: 3 | RNVC: 2

20 Aug 1979

5120-12-308-9044
Spanner Wrench

123089044
164638: RNCC: 3 | RNVC: 2
164638: RNCC: 5 | RNVC: 9
164638: RNCC: 5 | RNVC: 9

27 Nov 1986

5120-12-179-5813
Zugseil

121795813
08160-25M: RNCC: 3 | RNVC: 2

11 Jul 1979

5120-12-313-8626
Pliers

123138626
930VDE2: RNCC: 3 | RNVC: 2

14 May 1988

5120-12-302-9968
Blacksmiths' Tongs

123029968
57106040: RNCC: 3 | RNVC: 9

15 Feb 1985

5120-12-353-6144
Montierdorn

123536144
9256904000: RNCC: 3 | RNVC: 2

17 Apr 2001

5120-12-301-2828
Craftsman's Tweezers

123012828
5578: RNCC: 3 | RNVC: 2

3 Oct 1984

5120-12-368-1023
Socket Head Screw Key

123681023
43260025-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-383-1304
Pliers

123831304
621-80005: RNCC: 3 | RNVC: 2

16 Sep 2010

5120-12-363-8365
Bearing And Bushing Inserter And Remover

123638365
T671P5001114: RNCC: 3 | RNVC: 2

29 Jul 2004

5120-12-177-3373
Dorn

121773373
2300002-268000.001: RNCC: 2 | RNVC: 2
2300002-268000.001: RNCC: 3 | RNVC: 2
2300002-268000-001: RNCC: 5 | RNVC: 9
2300002-268000.001: RNCC: 5 | RNVC: 9

29 Jan 1979

5120-12-042-3568

5120-12-120-6014
Motorke Austreiber

121206014
43016817800: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-316-3063
Socket Head Screw Key

123163063
42901403: RNCC: 3 | RNVC: 2
LN-3MMBP: RNCC: 5 | RNVC: 2

9 Jan 1989

5120-12-175-8183
Spanner Wrench

121758183
264-619: RNCC: 3 | RNVC: 2
264-619: RNCC: 5 | RNVC: 2

23 Oct 1978

5120-12-381-7803
Socket Head Screw Key Set

123817803
0715311110: RNCC: 3 | RNVC: 2
A0715 311 110: RNCC: 5 | RNVC: 2
391417146202: RNCC: 6 | RNVC: 9
49381: RNCC: 6 | RNVC: 9

30 Mar 2010

5120-12-390-4218
Mechanical Puller Attachment

123904218
F6451948: RNCC: 3 | RNVC: 2

12 Nov 2012

5120-12-044-4920

5120-12-041-2715

5120-12-177-5512
Socket Head Screw Key

121775512
090348: RNCC: 3 | RNVC: 2
4850-951: RNCC: 5 | RNVC: 2

5 Feb 1979

5120-12-179-5812
Cable Type Ratchet Lever Puller

121795812
TU8RAL6014: RNCC: 3 | RNVC: 2
TU8: RNCC: 5 | RNVC: 2

11 Jul 1979

5120-12-320-0125
Open End Wrench

123200125
54.0024.210.01: RNCC: 3 | RNVC: 2

28 Nov 1989

5120-12-146-7137
Open End Wrench

121467137
34-685: RNCC: 3 | RNVC: 2
U00596: RNCC: 3 | RNVC: 2
U596: RNCC: 5 | RNVC: 2
U00596: RNCC: 5 | RNVC: 9
U596: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-385-1027
Combination Box And Open End Wrench

123851027
I002427: RNCC: 3 | RNVC: 2

2 May 2011

5120-12-157-2039
Seal Inserter

121572039
3982300: RNCC: 3 | RNVC: 2
2172200: RNCC: 5 | RNVC: 9
3705100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-360-5319
Lamp Cap Extractor

123605319
5275380030: RNCC: 3 | RNVC: 2

3 Jun 2003

5120-12-309-8299
Seal Inserter

123098299
4.124-E2-2/25: RNCC: 3 | RNVC: 9

6 Mar 1987

5120-12-382-0041
Torque Wrench Adapter

123820041
42-80023-065: RNCC: 3 | RNVC: 2

27 Apr 2010

5120-12-371-0135
Adjustable Wrench

123710135
7102-0036: RNCC: 3 | RNVC: 2

25 Jan 2007

5120-12-163-8890
Abzieher

121638890
VG95211-ML-121638890: RNCC: 2 | RNVC: 2
1X56 122 276: RNCC: 3 | RNVC: 2
1X56122276: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-3983
Einziehvorrichtung

121273983
18170220201008: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-183-0936
Mechanical Puller

121830936
4199454: RNCC: 3 | RNVC: 2

20 Mar 1980

5120-12-176-6853
Dorn

121766853
406589041500: RNCC: 3 | RNVC: 2
7083644: RNCC: 5 | RNVC: 2

13 Dec 1978

5120-12-127-2116
Open End Wrench

121272116
420 0484: RNCC: 3 | RNVC: 2
4200484: RNCC: 3 | RNVC: 2
C900M17X19: RNCC: 3 | RNVC: 2
103183: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-369-7247
Valve Tappet Adjusting Tool

123697247
100340: RNCC: 3 | RNVC: 2
100340: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-195-8861
Retaining Ring Installation Tool

121958861
8518472: RNCC: 3 | RNVC: 2
0851 8472: RNCC: 5 | RNVC: 2

27 Apr 1983

5120-12-376-1258
Hand Powered Poppet Valve Lapper

123761258
12731/37: RNCC: 3 | RNVC: 2
74050037: RNCC: 5 | RNVC: 2

14 Aug 2008

5120-12-384-3259
Bearing And Bushing Inserter And Remover

123843259
F0099975: RNCC: 3 | RNVC: 2

14 Feb 2011

5120-12-311-1826
Ge Montierwerkzeug

123111826
395589006303: RNCC: 3 | RNVC: 2

4 Aug 1987

5120-12-094-1230

5120-12-198-6578
Aufweitwer Einsatz

121986578
234 206: RNCC: 3 | RNVC: 2

17 Feb 1984

5120-12-314-2783
Montierhuelse

123142783
0852 9377: RNCC: 3 | RNVC: 2
8529377: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-182-2052
Driftpin

121822052
2531A: RNCC: 3 | RNVC: 9
VW131A: RNCC: 3 | RNVC: 9

18 Jan 1980

5120-12-374-3729
Socket Wrench Crowfoot Attachment

123743729
03190034-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-353-8744
Box Wrench

123538744
000589560300: RNCC: 3 | RNVC: 2

16 May 2001

5120-12-381-3088
Socket Wrench Handle

123813088
632600: RNCC: 3 | RNVC: 2

1 Feb 2010

5120-12-196-9327
Bearing And Bushing Inserter

121969327
1S51336-0000: RNCC: 3 | RNVC: 2
MAGERD 3550: RNCC: 5 | RNVC: 9

31 Aug 1983

5120-12-164-4810
Spanner Wrench

121644810
5800820-12: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-371-8548
Handicraft Snap Fastener Setter

123718548
2280.779.10: RNCC: 3 | RNVC: 2

23 May 2007

5120-12-392-7490
Box Wrench

123927490
SEWZG020: RNCC: 3 | RNVC: 2

4 Jul 2013

5120-12-344-4029
Torque Wrench Adapter

123444029
ZG8106G035: RNCC: 2 | RNVC: 2
ZG8106G035: RNCC: 3 | RNVC: 2
5120123444029: RNCC: 5 | RNVC: 2
ZG8106G035: RNCC: 5 | RNVC: 9

23 Oct 1997

5120-12-366-9069
Abzieh- Und Aufdrue

123669069
F6457256: RNCC: 3 | RNVC: 2

21 Jun 2005

5120-12-338-2866
Box Wrench

123382866
2A-30: RNCC: 3 | RNVC: 2
52052030: RNCC: 5 | RNVC: 2
97047649: RNCC: 5 | RNVC: 2
603406: RNCC: 5 | RNVC: 2

14 Jun 1995

5120-12-336-5097
Ge Montierwerkzeug

123365097
0851 6766: RNCC: 3 | RNVC: 2
8516766: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-178-6471
Abziehvorrichtung

121786471
01TC30099-03: RNCC: 3 | RNVC: 2
MAGERD4141: RNCC: 5 | RNVC: 9

7 May 1979

5120-12-337-9127
Piston Inserter

123379127
126 589 02 14 00: RNCC: 3 | RNVC: 2

3 May 1995

5120-12-172-6374
Dorn

121726374
1X56103771: RNCC: 3 | RNVC: 2
V103771: RNCC: 5 | RNVC: 2
0535426: RNCC: 5 | RNVC: 2
535426: RNCC: 5 | RNVC: 9

31 Jan 1978

5120-12-366-8626
Socket Wrench Crowfoot Attachment

123668626
440MJ14: RNCC: 3 | RNVC: 2
01210014: RNCC: 5 | RNVC: 2
01210014: RNCC: 5 | RNVC: 2

16 Jun 2005

5120-12-302-6991
Piston Ring Compressor

123026991
57493-645: RNCC: 3 | RNVC: 2

23 Jan 1985

5120-12-384-8708
Pull And Press Tool

123848708
B80140171: RNCC: 3 | RNVC: 2

6 Apr 2011

5120-12-142-0327
Mechanical Puller Forcing Screw

121420327
502: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-173-7140
Schluessel

121737140
4355810002: RNCC: 3 | RNVC: 2

3 May 1978

5120-12-375-5273
Mechanical Puller

123755273
Y4276271: RNCC: 3 | RNVC: 2

11 Jun 2008

5120-12-176-7827
Dorn

121767827
6402891: RNCC: 3 | RNVC: 2

20 Dec 1978

5120-12-121-6907

5120-12-350-2706
Abzieh- Und Aufdrue

123502706
313: RNCC: 3 | RNVC: 2

9 Mar 2000

5120-12-364-3370
Socket Wrench Socket

123643370
02010008-TCS: RNCC: 3 | RNVC: 2

11 Sep 2004

5120-12-381-7778
Torque Wrench

123817778
05074702001: RNCC: 3 | RNVC: 2
659934-600: RNCC: 3 | RNVC: 2
7442: RNCC: 5 | RNVC: 2

30 Mar 2010

5120-12-363-9041
Bearing And Bushing Inserter And Remover

123639041
T670P5001253: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-332-9293
Drift Pin Set

123329293
7668633101: RNCC: 3 | RNVC: 2
7668633101: RNCC: 5 | RNVC: 9

6 Oct 1993

5120-12-123-5052

5120-12-041-5947

5120-12-379-7173
Drive Pin Punch

123797173
105-13241W1: RNCC: 3 | RNVC: 2

26 Aug 2009

5120-12-332-8076
Op Montierwerkzeug

123328076
532113-8122.904: RNCC: 3 | RNVC: 2
532113-8122.904: RNCC: 5 | RNVC: 9

22 Sep 1993

5120-12-168-5276
Abziehvorrichtung

121685276
0976103100: RNCC: 3 | RNVC: 2

18 Mar 1977

5120-12-390-0233
Spanner Wrench

123900233
KV1008: RNCC: 3 | RNVC: 2

25 Sep 2012

5120-12-154-2555
Spanner Wrench

121542555
R22751: RNCC: 3 | RNVC: 2
R22751: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-9580
Pin Inserter

123129580
318270: RNCC: 3 | RNVC: 2

22 Feb 1988

5120-12-310-2208
Face Spanner Wrench Socket

123102208
01TC11826: RNCC: 3 | RNVC: 2
01TC11826: RNCC: 5 | RNVC: 9

22 Apr 1987

5120-12-376-5308
Socket Head Screw Key

123765308
43706: RNCC: 3 | RNVC: 2

14 Oct 2008

5120-12-392-1772
Mecha Ejector Tool

123921772
96746231: RNCC: 3 | RNVC: 2

13 May 2013

5120-12-157-0274
Socket Head Screw Key

121570274
NO PRIMARY REF 12-157-0274: RNCC: 3 | RNVC: 2
130272: RNCC: 5 | RNVC: 9
1997ZB9-64: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-342-1184
Open End Wrench

123421184
DIN133-34: RNCC: 2 | RNVC: 2

13 Dec 1996

5120-12-364-4722
Socket Head Screw Key

123644722
43550008-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-364-6777
Hand Hammer

123646777
70110005-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-385-9733
Socket Wrench Extension

123859733
3505: RNCC: 3 | RNVC: 2
4018754013241: RNCC: 5 | RNVC: 2
13210001: RNCC: 5 | RNVC: 2

26 Jul 2011

5120-12-307-9263
Mechanical Puller

123079263
TK-WT41-4910-001-12: RNCC: 2 | RNVC: 2
VW3047A: RNCC: 3 | RNVC: 2
3047A: RNCC: 3 | RNVC: 2
VW3047A: RNCC: 5 | RNVC: 2
C6628142: RNCC: 5 | RNVC: 2
3047: RNCC: 5 | RNVC: 9

19 May 1988

5120-12-345-5145
Inserted Hammer Face

123455145
2506: RNCC: 3 | RNVC: 2
10956R-50: RNCC: 3 | RNVC: 2
00.74.15.43: RNCC: 5 | RNVC: 2
79 05 00 50: RNCC: 5 | RNVC: 2

26 Mar 1998

5120-12-359-4299
Socket Wrench Socket

123594299
AS576-1833A-03: RNCC: 3 | RNVC: 2

5 Feb 2003

5120-12-123-5630
Socket Wrench

121235630
NO PRIMARY REF 12-123-5630: RNCC: 3 | RNVC: 2
000589160908: RNCC: 5 | RNVC: 2
01160: RNCC: 5 | RNVC: 9
1926110020: RNCC: 5 | RNVC: 9
430-24X26: RNCC: 5 | RNVC: 9
70-24X26: RNCC: 5 | RNVC: 9
213411: RNCC: 5 | RNVC: 9
27-24X26: RNCC: 5 | RNVC: 9
070100: RNCC: 5 | RNVC: 9
27-24X26: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-193-6521
Crowfoot Wrench Head Socket

121936521
30AM028: RNCC: 3 | RNVC: 2

17 Aug 1982

5120-12-344-6008
Ge Montierwerkzeug

123446008
1X56136470: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-338-4335
Face Spanner Wrench Socket

123384335
0705150420: RNCC: 3 | RNVC: 2

10 Jul 1995

5120-12-190-7435
Screw Thread Insert Inserter

121907435
23530106000: RNCC: 3 | RNVC: 2
10530106000: RNCC: 5 | RNVC: 2
1053 0106 000: RNCC: 5 | RNVC: 9
S6K: RNCC: 5 | RNVC: 9

10 Dec 1981

5120-12-336-5094
We Montierwerkzeug

123365094
0851 5133: RNCC: 3 | RNVC: 2
8515133: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-323-7360
Flat Tip Screwdriver

123237360
154: RNCC: 3 | RNVC: 2

12 Dec 1990

5120-12-338-6662
Hydraulic Jack Handle

123386662
0005834945: RNCC: 3 | RNVC: 2

11 Aug 1995

5120-12-372-7776
Ratchet Wrench

123727776
7330010: RNCC: 3 | RNVC: 2

21 Aug 2007

5120-12-336-5477
Socket Wrench Socket

123365477
900A-1.1/4: RNCC: 3 | RNVC: 2
043279: RNCC: 5 | RNVC: 2
03430056: RNCC: 5 | RNVC: 9
52A-1 1/4: RNCC: 5 | RNVC: 9

24 Nov 1994

5120-12-302-0419
Socket Head Screw Key

123020419
ET1340-G5-1/3: RNCC: 3 | RNVC: 2

29 Nov 1984

5120-12-126-4674
Electronic Equipment Alignment Tool

121264674
NO PRIMARY REF 12-126-4674: RNCC: 3 | RNVC: 2
108684: RNCC: 5 | RNVC: 9
5505: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-158-3462
Vakuum Greifer

121583462
920: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-380-3323
Seal Inserter

123803323
730589121500: RNCC: 3 | RNVC: 2

20 Oct 2009

5120-12-378-7176
Mechanical Puller Attachment

123787176
02002125: RNCC: 3 | RNVC: 2
4021176871238: RNCC: 5 | RNVC: 2

6 May 2009

5120-12-127-0414

5120-12-361-1448
Gri Ersatzteilsatz

123611448
4350: RNCC: 3 | RNVC: 2
19020000: RNCC: 5 | RNVC: 2

27 Aug 2003

5120-12-338-3025
Seal Remover

123383025
120650: RNCC: 3 | RNVC: 2

20 Jun 1995

5120-12-368-1016
Cross Tip Screwdriver

123681016
47651004-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-385-5820
Aligning Punch

123855820
F30376867: RNCC: 3 | RNVC: 2

17 Jun 2011

5120-12-394-4224
Seal Inserter

123944224
F6788557: RNCC: 3 | RNVC: 2

29 Nov 2013

5120-12-133-6830

5120-12-149-9531

5120-12-021-2525

5120-12-364-5619
Socket Head Screw Key

123645619
43150011-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-126-3324
Hand Hammer

121263324
470BSB300: RNCC: 3 | RNVC: 2
470BSB300: RNCC: 3 | RNVC: 9
226-300MST: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-8296
Manual Impact Wrench

123408296
696: RNCC: 3 | RNVC: 2
6960004: RNCC: 5 | RNVC: 2

20 Jun 1996

5120-12-010-9663

5120-12-370-8833
Socket Wrench Socket

123708833
L60050140: RNCC: 3 | RNVC: 2
80996030348: RNCC: 5 | RNVC: 2
80.99603-0348: RNCC: 5 | RNVC: 2

11 Jan 2007

5120-12-179-5352
Spanner Wrench

121795352
VG95211-ML-121795352: RNCC: 2 | RNVC: 2
AFG006049: RNCC: 3 | RNVC: 2

4 Jul 1979

5120-12-157-2612
Screwdriver Bit

121572612
3024 14: RNCC: 3 | RNVC: 2
990-14: RNCC: 3 | RNVC: 2
54X14: RNCC: 3 | RNVC: 2
3132291R1: RNCC: 5 | RNVC: 2
03060014: RNCC: 5 | RNVC: 2
00503309: RNCC: 5 | RNVC: 2
50-33-M14: RNCC: 5 | RNVC: 2
2487170006: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1628

5120-12-010-9642

5120-12-327-7953
Torque Wrench

123277953
6981C: RNCC: 3 | RNVC: 2
1807856: RNCC: 5 | RNVC: 2
180785: RNCC: 5 | RNVC: 9

6 Mar 1992

5120-12-378-7473
Socket Wrench

123787473
061440: RNCC: 3 | RNVC: 2

8 May 2009

5120-12-172-6493
Dorn

121726493
7672798052: RNCC: 3 | RNVC: 2
0535883: RNCC: 5 | RNVC: 2
535883: RNCC: 5 | RNVC: 9

3 Feb 1978

5120-12-392-6889
Mechan Mating Part

123926889
CTP40914G001: RNCC: 3 | RNVC: 2

28 Jun 2013

5120-12-168-1127
Spanner Wrench

121681127
12709-21400W1: RNCC: 3 | RNVC: 2
12709-21400W1: RNCC: 5 | RNVC: 2
12709-21400W1: RNCC: 5 | RNVC: 9

18 Feb 1977

5120-12-364-6768
Drive Pin Punch

123646768
70090006-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-357-8355
Ku Montierwerkzeug

123578355
F6275199: RNCC: 3 | RNVC: 2

30 Jul 2002

5120-12-316-9521
Drive Pin Punch

123169521
8-7300.02: RNCC: 2 | RNVC: 2
8-7300.02: RNCC: 3 | RNVC: 2
9861570: RNCC: 5 | RNVC: 2
8-7300.02: RNCC: 5 | RNVC: 9
9861570: RNCC: 5 | RNVC: 9

28 Feb 1989

5120-12-322-8532
Mechanical Puller Attachment

123228532
99366604: RNCC: 3 | RNVC: 2
530060-1: RNCC: 5 | RNVC: 9

28 Sep 1990

5120-12-181-1319
Socket Wrench Handle

121811319
1074: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-133-5004
Schluessel

121335004
AWENTW2544TZ31: RNCC: 3 | RNVC: 2
AWENTW2544TZ31: RNCC: 5 | RNVC: 2
AWENTW2544TZ31: RNCC: 5 | RNVC: 2
AWENTW2544TZ31: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-198-7785
Mechanical Puller Set

121987785
25A: RNCC: 3 | RNVC: 2

24 Feb 1984

5120-12-313-4276
Zentrier- Ring

123134276
80996040077: RNCC: 3 | RNVC: 2
80.99604.0077: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-320-7641
Spanner Wrench

123207641
272.369 562: RNCC: 2 | RNVC: 2
272.369 562: RNCC: 3 | RNVC: 2

14 Feb 1990

5120-12-192-8052
Bearing And Bushing Inserter

121928052
385 589 03 15 00: RNCC: 3 | RNVC: 2
385589031500: RNCC: 3 | RNVC: 2

26 May 1982

5120-12-133-4475

5120-12-133-2349

5120-12-140-2563
Drive Pin Punch

121402563
D041301T2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-139-5789

5120-12-137-8864

5120-12-356-7141
Bearing And Bushing Inserter

123567141
406589024300: RNCC: 3 | RNVC: 2

26 Mar 2002

5120-12-342-1969
Schluessel

123421969
5510403: RNCC: 3 | RNVC: 2

2 Jan 1997

5120-12-196-7393
Aligning Punch

121967393
1X56136489: RNCC: 3 | RNVC: 2

9 Aug 1983

5120-12-385-0242
Mechanical Puller Step Plate

123850242
F6372946: RNCC: 3 | RNVC: 2

20 Apr 2011

5120-12-093-7587

5120-12-316-4083
Socket Head Screw Key Blade

123164083
99X5: RNCC: 3 | RNVC: 2
42400104: RNCC: 3 | RNVC: 9
99-X5: RNCC: 5 | RNVC: 9

16 Jan 1989

5120-12-126-2473
Hand Hammer

121262473
NO PRIMARY REF 12-126-2473: RNCC: 3 | RNVC: 2
268-30: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-3539
Open End Wrench

121813539
DIN3114-75: RNCC: 2 | RNVC: 2
75DIN3114: RNCC: 5 | RNVC: 2

14 Nov 1979

5120-12-319-6049
Gl Montierwerkzeug

123196049
7 124 13 1300: RNCC: 3 | RNVC: 2
SUS-9-0306: RNCC: 5 | RNVC: 2

17 Oct 1989

5120-12-198-0151
Hand Screw Jack

121980151
E4783-07: RNCC: 3 | RNVC: 2

12 Dec 1983

5120-12-123-5247

5120-12-370-7687
Spanner Wrench

123707687
5176267: RNCC: 3 | RNVC: 2

19 Dec 2006

5120-12-365-9740
Combination Box And Open End Wrench

123659740
40483232-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-313-3877
Sp Montierwerkzeug

123133877
510031: RNCC: 2 | RNVC: 9

26 Mar 1988

5120-12-321-7471
Flat Tip Screwdriver

123217471
52728050: RNCC: 3 | RNVC: 2
8060VDE-0,5X3,5X100: RNCC: 3 | RNVC: 2
169099: RNCC: 5 | RNVC: 2

21 Jun 1990

5120-12-135-0212
Socket Wrench

121350212
NO PRIMARY REF 12-135-0212: RNCC: 3 | RNVC: 2
105400: RNCC: 5 | RNVC: 9
1945NKBZ5-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-166-5688
Pin Remover

121665688
K4187-0200: RNCC: 3 | RNVC: 9
K4190: RNCC: 5 | RNVC: 9

24 Sep 1976

5120-12-350-2575
Bl Ausbeulwerkzeug

123502575
041: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-385-5837
Engine Valve Seat Insert Replacing Tool

123855837
F70270050: RNCC: 3 | RNVC: 2

17 Jun 2011

5120-12-371-7248
Seal Inserter

123717248
405589001400: RNCC: 3 | RNVC: 2

9 May 2007

5120-12-150-0982
Lamp Extractor

121500982
VS502TZ5: RNCC: 3 | RNVC: 9
VS0502G005: RNCC: 5 | RNVC: 2
VS0502G005: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-5050
Spanner Wrench

121815050
312589050700: RNCC: 3 | RNVC: 9

26 Nov 1979

5120-12-174-8368
Pliers

121748368
NM483: RNCC: 3 | RNVC: 2
NM483: RNCC: 5 | RNVC: 9

7 Aug 1978

5120-12-314-3528
Socket Wrench Handle

123143528
8816G: RNCC: 3 | RNVC: 2
2635860006: RNCC: 5 | RNVC: 2
09110: RNCC: 5 | RNVC: 9
12200000: RNCC: 5 | RNVC: 9
438: RNCC: 5 | RNVC: 9

29 Jun 1988

5120-12-194-1912
Bearing And Bushing Inserter

121941912
01TC33504: RNCC: 3 | RNVC: 2

11 Oct 1982

5120-12-339-5796
Hand Vise

123395796
51016560: RNCC: 3 | RNVC: 9

7 Dec 1995

5120-12-342-6105
Crimping Tool Die

123426105
VG95236T11AA106: RNCC: 2 | RNVC: 2
MRP0848: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-123-5308

5120-12-374-4049
Screwdriver Bit

123744049
930589013300: RNCC: 3 | RNVC: 2
9305893900: RNCC: 5 | RNVC: 2

14 Feb 2008

5120-12-340-4754
Socket Wrench Screwdriver Attachment

123404754
41515: RNCC: 3 | RNVC: 9
740C5-100: RNCC: 5 | RNVC: 9

19 Apr 1996

5120-12-309-5569
Mechanical Puller

123095569
604-45.12.301-19E: RNCC: 3 | RNVC: 2

4 Feb 1987

5120-12-371-0334
Spanner Wrench

123710334
4VN184-ST: RNCC: 3 | RNVC: 2

29 Jan 2007

5120-12-364-6790
Socket Wrench Socket

123646790
03010018-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-325-6658
Spanner Wrench

123256658
5105.020.06.01: RNCC: 3 | RNVC: 2
7820353137: RNCC: 5 | RNVC: 2
78203 53137: RNCC: 5 | RNVC: 9

27 Jun 1991

5120-12-379-0637
Hous Mounting Tool

123790637
F6553631: RNCC: 3 | RNVC: 2

19 Jun 2009

5120-12-368-0380
Socket Head Screw Key

123680380
54731: RNCC: 3 | RNVC: 2
00.41.73.02: RNCC: 5 | RNVC: 2

23 Nov 2005

5120-12-341-3437
Socket Wrench Socket

123413437
WRYUG7340: RNCC: 3 | RNVC: 2
A050170190002: RNCC: 5 | RNVC: 2

27 Aug 1996

5120-12-177-5046
Spanner Wrench

121775046
700120W5: RNCC: 3 | RNVC: 2
700120W5: RNCC: 5 | RNVC: 9

5 Feb 1979

5120-12-309-9438
Mechanical Puller

123099438
601 589 08 3300: RNCC: 3 | RNVC: 2

20 Mar 1987

5120-12-320-0910
Tool Handle Wedge

123200910
6798-1: RNCC: 3 | RNVC: 9

6 Dec 1989

5120-12-133-4802
Open End Wrench

121334802
NO PRIMARY REF 12-133-4802: RNCC: 3 | RNVC: 2
5M.8936.220.93: RNCC: 5 | RNVC: 2
5M8936-220-93: RNCC: 5 | RNVC: 2
104954: RNCC: 5 | RNVC: 9
1931NM5X7: RNCC: 5 | RNVC: 9

30 May 1969

Load More Results