What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 20 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 20 of 62

5120-12-041-6028

5120-12-361-1409
Mechanical Puller

123611409
505.44.0018: RNCC: 3 | RNVC: 2

27 Aug 2003

5120-12-314-2155
Montierhuelse

123142155
0852 8772: RNCC: 3 | RNVC: 2
8528772: RNCC: 5 | RNVC: 2

17 Jun 1988

5120-12-010-5216

5120-12-197-5417
Feststellein Platte

121975417
4900059-751280.000.0: RNCC: 3 | RNVC: 2
4900059-751280-000-0: RNCC: 5 | RNVC: 2
WW 306 889 AU: RNCC: 5 | RNVC: 9
WW306889-AU: RNCC: 5 | RNVC: 9

31 Oct 1983

5120-12-139-2515
Abpreszvorrichtung

121392515
070M01200: RNCC: 3 | RNVC: 2
VQ76348: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-375-3578
Spanner Wrench

123753578
03356S: RNCC: 3 | RNVC: 2
275525: RNCC: 5 | RNVC: 2

23 May 2008

5120-12-367-8662
Mechanical Puller

123678662
12137673248: RNCC: 3 | RNVC: 2
12137673248: RNCC: 5 | RNVC: 2

25 Oct 2005

5120-12-392-4358
Electronic Equipment Alignment Tool

123924358
T4845 26: RNCC: 3 | RNVC: 2

7 Jun 2013

5120-12-011-0071

5120-12-094-1225

5120-12-126-5565
Socket Wrench

121265565
30352820400000: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-010-9643

5120-12-327-8336
Schluessel

123278336
VG95211-ML-123278336: RNCC: 2 | RNVC: 2
347-640-060: RNCC: 3 | RNVC: 2

11 Mar 1992

5120-12-126-2986
Offset Screwdriver

121262986
C39407-A39-C4: RNCC: 3 | RNVC: 2
FGWZ4AA2: RNCC: 5 | RNVC: 2
108432: RNCC: 5 | RNVC: 9
5414B: RNCC: 5 | RNVC: 9
10646: RNCC: 5 | RNVC: 9
20646: RNCC: 5 | RNVC: 9
10646: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-358-7764
Schluesseleinsatz

123587764
80996030226: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-387-2634
Installation And Re

123872634
055.205: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-12-320-7613
Ausrichtwerk Griff

123207613
6387579: RNCC: 3 | RNVC: 2
1165395: RNCC: 5 | RNVC: 2

14 Feb 1990

5120-12-338-4373
Mechanical Puller Attachment

123384373
000589343400: RNCC: 3 | RNVC: 2
000 589 34 34 00: RNCC: 5 | RNVC: 2

10 Jul 1995

5120-12-168-5277
Spanner Wrench

121685277
0277086404: RNCC: 3 | RNVC: 2

18 Mar 1977

5120-12-304-3891
Aufdrueckwerkzeug

123043891
12402000: RNCC: 3 | RNVC: 9

11 Jul 1985

5120-12-041-6025

5120-12-335-6866
Pliers

123356866
0852 2285: RNCC: 3 | RNVC: 2
8522285: RNCC: 5 | RNVC: 2

13 Sep 1994

5120-12-324-9447
Mechanical Puller Attachment

123249447
820-225: RNCC: 3 | RNVC: 2

12 Apr 1991

5120-12-314-5261
Bearing And Bushing Inserter

123145261
D11.49023-0178: RNCC: 3 | RNVC: 2

15 Jul 1988

5120-12-320-9361
Hand Pinzettensatz

123209361
250A-10-1000: RNCC: 3 | RNVC: 2
250A-10-1000: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-12-329-4568
Zange Einsatz

123294568
621-60405: RNCC: 3 | RNVC: 2

21 Aug 1992

5120-12-149-5871
Socket Wrench

121495871
NO PRIMARY REF 12-149-5871: RNCC: 3 | RNVC: 2
105132: RNCC: 5 | RNVC: 9
1936E1-2X9-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-131-7146
Dorn

121317146
3155890139: RNCC: 3 | RNVC: 2
3155890139: RNCC: 3 | RNVC: 9
315589013900: RNCC: 5 | RNVC: 2
315589013900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-363-8708
Bearing And Bushing Inserter And Remover

123638708
T670P5001108: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-166-0404
Refrigeration Valve Stem Wrench Socket

121660404
R6810M4: RNCC: 3 | RNVC: 2
R6810M4: RNCC: 5 | RNVC: 2
108889: RNCC: 5 | RNVC: 2

24 Jul 1976

5120-12-338-1430
Rotating Members Aligning Tool

123381430
603 589 01 40 00: RNCC: 3 | RNVC: 2

30 May 1995

5120-12-364-4732
Socket Wrench Crowfoot Attachment

123644732
02210016-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-380-2480
Hand Roller

123802480
125.584: RNCC: 3 | RNVC: 2

9 Oct 2009

5120-12-176-8749
Reduzierstueck

121768749
111680: RNCC: 3 | RNVC: 9

20 Dec 1978

5120-12-021-6799

5120-12-322-3508
Socket Wrench

123223508
1945NB-M4: RNCC: 3 | RNVC: 2
105327: RNCC: 5 | RNVC: 2

14 Aug 1990

5120-12-368-5022
Mechanical Puller

123685022
714522130: RNCC: 3 | RNVC: 2

20 Mar 2006

5120-12-342-6695
Electrical Contact Remover

123426695
18781 24248: RNCC: 2 | RNVC: 2
1878124248: RNCC: 3 | RNVC: 2
18781 24248: RNCC: 5 | RNVC: 9

13 Mar 1997

5120-12-355-9093
Open End Wrench

123559093
F3 0002775: RNCC: 3 | RNVC: 2

4 Jan 2002

5120-12-175-6756
Socket Head Screw Key Set

121756756
1997M7T: RNCC: 3 | RNVC: 9
105943: RNCC: 5 | RNVC: 2

10 Oct 1978

5120-12-355-3227
Mechan Druckstueck

123553227
5555124: RNCC: 3 | RNVC: 2

31 Oct 2001

5120-12-383-4579
Mechanical Puller Step Plate

123834579
T661P1004110: RNCC: 3 | RNVC: 2

22 Oct 2010

5120-12-170-1038
Spanner Wrench

121701038
12709-11000W3: RNCC: 3 | RNVC: 2
335912-9020.000: RNCC: 3 | RNVC: 2
12709-11000W3: RNCC: 5 | RNVC: 2
12709-11000W3: RNCC: 5 | RNVC: 9
335912-9020.000: RNCC: 5 | RNVC: 9

27 Jun 1977

5120-12-168-7652
Stiftauszi Einsatz

121687652
4900072-010000: RNCC: 2 | RNVC: 2
100332-10000W3: RNCC: 3 | RNVC: 2
4900072-010000: RNCC: 5 | RNVC: 2
100332-10000W3: RNCC: 5 | RNVC: 9
4900072-010000: RNCC: 5 | RNVC: 9

6 Apr 1977

5120-12-146-0579
Spanner Wrench

121460579
510117-05: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-306-8268
Box Wrench

123068268
NM386-21: RNCC: 3 | RNVC: 2
25300259: RNCC: 5 | RNVC: 2
NM386-21: RNCC: 5 | RNVC: 9

8 Apr 1986

5120-12-339-9185
Seal Inserter And Remover

123399185
F6451947: RNCC: 3 | RNVC: 2
F6 451947: RNCC: 5 | RNVC: 2
(241)A4249F6451947: RNCC: 8 | RNVC: 2
F6451947: RNCC: 8 | RNVC: 2

1 Feb 1996

5120-12-369-3264
Open End Box Wrench

123693264
122-12X13: RNCC: 3 | RNVC: 2
00.29.92.82: RNCC: 5 | RNVC: 2

22 Jun 2006

5120-12-357-2426
Socket Wrench Handle

123572426
0005810302: RNCC: 3 | RNVC: 2

24 May 2002

5120-12-189-9742
Hand Terminal Crimping Tool

121899742
WZ 65: RNCC: 3 | RNVC: 9
WZ65: RNCC: 5 | RNVC: 9

29 Oct 1981

5120-12-198-6071
Mechanical Puller Forcing Screw

121986071
5870204006: RNCC: 3 | RNVC: 2
026061: RNCC: 5 | RNVC: 2
5870204006: RNCC: 5 | RNVC: 9

14 Feb 1984

5120-12-306-3088
Open End Wrench

123063088
600103/35: RNCC: 3 | RNVC: 2
S03600103/35: RNCC: 3 | RNVC: 2
S03600103/35: RNCC: 5 | RNVC: 9

18 Feb 1986

5120-12-044-4918

5120-12-335-0892
Dreh Winkelscheibe

123350892
F30276912: RNCC: 3 | RNVC: 2

21 Jul 1994

5120-12-382-1988
Retaining Ring Pliers

123821988
EJ 1140: RNCC: 3 | RNVC: 2
01.57.86.72: RNCC: 5 | RNVC: 2

20 May 2010

5120-12-140-3441
Sheet Metalworking Dolly Block

121403441
031A309: RNCC: 3 | RNVC: 2
288: RNCC: 3 | RNVC: 2
1918N: RNCC: 3 | RNVC: 2
5141980004: RNCC: 5 | RNVC: 2
56390: RNCC: 5 | RNVC: 2
3008: RNCC: 5 | RNVC: 9
190: RNCC: 5 | RNVC: 9
1918: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-140-9170
Mechanical Puller

121409170
120600: RNCC: 3 | RNVC: 2
4611: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-143-3035
Open End Wrench

121433035
RELWZ37A: RNCC: 3 | RNVC: 2
RELWZ37A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-154-2549
Spanner Wrench

121542549
R24236: RNCC: 3 | RNVC: 2
R24236: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-345-6775
Cross Tip Screwdriver

123456775
ESD250710: RNCC: 3 | RNVC: 2

14 Apr 1998

5120-12-311-6787
Face Spanner Wrench Socket

123116787
80996036001: RNCC: 3 | RNVC: 2
80.99603.6001: RNCC: 5 | RNVC: 2
V986: RNCC: 5 | RNVC: 2

6 Oct 1987

5120-12-021-2523

5120-12-365-9733
Cross Tip Screwdriver

123659733
47651001-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-391-9372
Socket Wrench

123919372
SSG30G: RNCC: 3 | RNVC: 2

19 Apr 2013

5120-12-156-3052
Hebel

121563052
144703403: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-157-2616
Eindrueck- Huelse

121572616
7404798001: RNCC: 3 | RNVC: 2
3135554R1: RNCC: 5 | RNVC: 2
0694718: RNCC: 5 | RNVC: 2
7404798001: RNCC: 5 | RNVC: 9
694718: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-6203
Beha Ueberlaufrohr

121356203
075M00300: RNCC: 3 | RNVC: 2
839589099000: RNCC: 5 | RNVC: 2
8395890990: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-363-9046
Bearing And Bushing Inserter And Remover

123639046
T670P5001258: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-090-1468

5120-12-168-3396
Dorn

121683396
4159927: RNCC: 3 | RNVC: 2

10 Mar 1977

5120-12-090-1453

5120-12-311-9715
Spanner Wrench

123119715
272.312 945: RNCC: 2 | RNVC: 2
272.312 945: RNCC: 3 | RNVC: 2
272.312945: RNCC: 5 | RNVC: 2

5 Nov 1987

5120-12-127-5312
Hand Terminal Crimping Tool

121275312
59239: RNCC: 3 | RNVC: 2
59239: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-363-9698
Bearing And Bushing Inserter

123639698
T671P5002221: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-375-0245
Handling Tool Arm

123750245
TA3017G001: RNCC: 3 | RNVC: 2

15 Apr 2008

5120-12-182-1567
Verstemmvorrichtung

121821567
01TC31020: RNCC: 3 | RNVC: 2

16 Jan 1980

5120-12-199-7358
Mechanical Puller

121997358
GAV22/40: RNCC: 3 | RNVC: 9
GAV22/40: RNCC: 5 | RNVC: 2
M213029: RNCC: 5 | RNVC: 9

26 May 1984

5120-12-357-9122
Socket Wrench Crowfoot Attachment

123579122
J0433557D311-000A1-004: RNCC: 3 | RNVC: 2

14 Aug 2002

5120-12-357-2273
Duese Reiniger

123572273
0986611159: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-331-6242
Seal Remover

123316242
80996020126: RNCC: 3 | RNVC: 2
80.99602.0126: RNCC: 5 | RNVC: 2
V1124: RNCC: 5 | RNVC: 2

1 Jun 1993

5120-12-150-3964
Screwdriver Bit

121503964
1X46112752: RNCC: 3 | RNVC: 2
V112752: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-041-2677

5120-12-180-2927
Socket Wrench Set

121802927
7400DZ11H: RNCC: 3 | RNVC: 9

31 Aug 1979

5120-12-306-8010
Tap And Reamer Wrench

123068010
51005100: RNCC: 3 | RNVC: 9

3 Apr 1986

5120-12-326-2692
Seal Inserter

123262692
F30277006: RNCC: 3 | RNVC: 2

23 Aug 1991

5120-12-326-0176
Engine Valve Seat Insert Replacing Tool

123260176
103589021500: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-170-3109
Mallet Handle

121703109
DIN5128-340: RNCC: 2 | RNVC: 2
340DIN5128: RNCC: 5 | RNVC: 2

7 Jul 1977

5120-12-149-5826
Socket Wrench

121495826
NO PRIMARY REF 12-149-5826: RNCC: 3 | RNVC: 2
26R5-8X3-4WW: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-092-2888

5120-12-343-0370
Socket Head Screw Key Set

123430370
4409A: RNCC: 3 | RNVC: 2

24 Apr 1997

5120-12-133-2529
Triebnietmaschine

121332529
4420007UND4420111: RNCC: 3 | RNVC: 2
36697: RNCC: 5 | RNVC: 9
4420003: RNCC: 5 | RNVC: 9
173GX: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-304-9460
Retaining Ring Pliers

123049460
6796966W11: RNCC: 3 | RNVC: 2

10 Sep 1985

5120-12-129-3338

5120-12-135-7842
Gl Einpresz- Huelse

121357842
W38558: RNCC: 3 | RNVC: 2
W38558: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-328-4105
Preformed Packing Inserter

123284105
6000039: RNCC: 3 | RNVC: 2

15 May 1992

5120-12-342-6691
Bearing And Bushing Inserter

123426691
18781 24252: RNCC: 2 | RNVC: 2
1878124252: RNCC: 3 | RNVC: 2
18781 24252: RNCC: 5 | RNVC: 9

13 Mar 1997

5120-12-380-4393
Spanner Wrench

123804393
ZG7300G041: RNCC: 3 | RNVC: 2

30 Oct 2009

5120-12-392-6751
Torque Wrench Adapter

123926751
CTP40501G001: RNCC: 3 | RNVC: 2

27 Jun 2013

5120-12-177-5820
Socket Wrench

121775820
720S: RNCC: 3 | RNVC: 2
34CLKW: RNCC: 3 | RNVC: 2
1925210012: RNCC: 5 | RNVC: 2
08070: RNCC: 5 | RNVC: 2
4303000S: RNCC: 5 | RNVC: 9

7 Feb 1979

5120-12-364-5672
Open End Wrench

123645672
40031415-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-363-9845
Bearing And Bushing Inserter

123639845
T671P5002262: RNCC: 3 | RNVC: 2

10 Aug 2004

5120-12-137-8320

5120-12-388-5689
Socket Wrench Socket

123885689
001.806: RNCC: 3 | RNVC: 2
001.806: RNCC: 5 | RNVC: 2

2 Apr 2012

5120-12-376-4072
Screwdriver Bit

123764072
05002976001: RNCC: 3 | RNVC: 2
87-TX30-TX40: RNCC: 5 | RNVC: 2

25 Sep 2008

5120-12-123-5971

5120-12-133-4768
Spanner Wrench

121334768
3L17227: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-369-7406
Ge Montierwerkzeug

123697406
437589104300: RNCC: 3 | RNVC: 2
7083656: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-180-0965
Socket Wrench

121800965
320-991201: RNCC: 3 | RNVC: 2

20 Aug 1979

5120-12-139-5792

5120-12-150-0191
Mechanical Puller

121500191
000P29860B0250: RNCC: 3 | RNVC: 2
P29860: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-187-8644
Hole Sheet Metal Holder

121878644
2072K-44: RNCC: 3 | RNVC: 2

13 May 1981

5120-12-312-9661
Mechanical Puller Attachment

123129661
01TC31850: RNCC: 3 | RNVC: 2

23 Feb 1988

5120-12-174-9817
Spanner Wrench

121749817
2S55055-0000: RNCC: 3 | RNVC: 2

15 Aug 1978

5120-12-126-1858
Gasrohr Klemmfutter

121261858
141070: RNCC: 3 | RNVC: 2
1470: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-314-2156
Socket Wrench Adapter

123142156
0852 9878: RNCC: 3 | RNVC: 2
8529878: RNCC: 5 | RNVC: 2

17 Jun 1988

5120-12-388-5862
Mounting Punch

123885862
MTDL870300500SXX0J: RNCC: 3 | RNVC: 2

3 Apr 2012

5120-12-318-2043
Ratchet Wrench

123182043
R0-0-VKT10: RNCC: 3 | RNVC: 2

20 Jun 1989

5120-12-322-5271
Spring Inserter And Remover

123225271
525-60: RNCC: 3 | RNVC: 2

29 Aug 1990

5120-12-328-6983
Seal Inserter

123286983
F30276497: RNCC: 3 | RNVC: 2

16 Jun 1992

5120-12-330-0129
Mechanical Puller

123300129
0851 6699: RNCC: 3 | RNVC: 2
8516699: RNCC: 5 | RNVC: 2

22 Oct 1992

5120-12-370-6263
Trowel

123706263
703 160 00: RNCC: 3 | RNVC: 2
02.33.38.58: RNCC: 5 | RNVC: 2

1 Dec 2006

5120-12-364-5617
Wire Twister Pliers

123645617
65751220-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-170-5705
Mechanical Puller

121705705
18-1: RNCC: 3 | RNVC: 2

20 Jul 1977

5120-12-362-2399
Open End Wrench

123622399
66.353.011: RNCC: 3 | RNVC: 2
66353011: RNCC: 5 | RNVC: 9

28 Jan 2004

5120-12-368-3090
Ge Montierwerkzeug

123683090
4615800101: RNCC: 3 | RNVC: 2

15 Feb 2006

5120-12-150-3954
Anziehvorrichtung

121503954
833589025900: RNCC: 3 | RNVC: 2
8335890259: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-135-2093

5120-12-133-2347

5120-12-023-6063

5120-12-372-2741
Mechanical Puller

123722741
20-1+S: RNCC: 3 | RNVC: 2

3 Jul 2007

5120-12-196-7289
Socket Wrench Screwdriver Attachment

121967289
FAML8: RNCC: 3 | RNVC: 2

8 Aug 1983

5120-12-333-5911
Spanner Wrench

123335911
27321W1: RNCC: 3 | RNVC: 2

11 Jan 1994

5120-12-325-8891
Schluessel

123258891
307.601-60521.00: RNCC: 3 | RNVC: 2

18 Jul 1991

5120-12-191-7859
Face Spanner Wrench Socket

121917859
E3-2010190: RNCC: 2 | RNVC: 2
E3-2010190: RNCC: 3 | RNVC: 2
5120121917859: RNCC: 5 | RNVC: 2
E3-2010190: RNCC: 5 | RNVC: 9

5 Mar 1982

5120-12-166-1963
Mechanical Puller

121661963
8475614: RNCC: 3 | RNVC: 2
8206-883: RNCC: 5 | RNVC: 2

12 Aug 1976

5120-12-156-1579
Socket Wrench Socket

121561579
NM293-24: RNCC: 3 | RNVC: 2
NM293-24: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-7317
Spanner Wrench

121907317
4900144-13000: RNCC: 2 | RNVC: 2
332104-8120.910: RNCC: 3 | RNVC: 2
332104-8120-910: RNCC: 5 | RNVC: 9
332104-8120.910: RNCC: 5 | RNVC: 9

10 Dec 1981

5120-12-147-6102
Saug-Un Gewindedorn

121476102
WZ75: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-139-3065

5120-12-153-2069
Drehmomentschluesse

121532069
CH278-9FE: RNCC: 3 | RNVC: 2
1206 1064: RNCC: 5 | RNVC: 2
3-416-0-018-010-7: RNCC: 5 | RNVC: 2
3-416-0-018-010-7: RNCC: 5 | RNVC: 9
CH278-9FE: RNCC: 5 | RNVC: 9
A26-50-87: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-6578
Mechanical Puller Attachment

121266578
22-3: RNCC: 3 | RNVC: 2
7083622: RNCC: 5 | RNVC: 2
000589353300: RNCC: 5 | RNVC: 2
0005893533/00: RNCC: 5 | RNVC: 2
8126H3: RNCC: 5 | RNVC: 9
8828-3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-150-2741
Mechanical Puller

121502741
23176-264570-00-0: RNCC: 2 | RNVC: 2
23176-264570.00.0: RNCC: 2 | RNVC: 2
23176-264570-00-0: RNCC: 5 | RNVC: 2
23176-264570.00.0: RNCC: 5 | RNVC: 2
23176-264570-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-358-4232
Spanner Wrench

123584232
CB 00107: RNCC: 3 | RNVC: 2

17 Oct 2002

5120-12-359-6712
Bearing And Bushing Inserter And Remover

123596712
T623P5003051: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-319-3188
Crimping Tool Die

123193188
62141 106: RNCC: 3 | RNVC: 2
62051 106: RNCC: 5 | RNVC: 2

22 Sep 1989

5120-12-123-4835
Open End Wrench

121234835
DIN133-41: RNCC: 2 | RNVC: 2
2300-41: RNCC: 3 | RNVC: 2
133-41: RNCC: 3 | RNVC: 2
452-41: RNCC: 3 | RNVC: 2
175-41: RNCC: 3 | RNVC: 2
01750005: RNCC: 5 | RNVC: 2
41DIN133: RNCC: 5 | RNVC: 2
1102110005: RNCC: 5 | RNVC: 9
571A301-41: RNCC: 5 | RNVC: 9
50520: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-8508
Box Wrench

121718508
DIN897-18X19: RNCC: 2 | RNVC: 2
23-18X19: RNCC: 3 | RNVC: 2
41071819: RNCC: 5 | RNVC: 2
237825: RNCC: 5 | RNVC: 9
2S-M18X19: RNCC: 5 | RNVC: 9
18X19DIN897: RNCC: 5 | RNVC: 9
220-CS-18X19: RNCC: 5 | RNVC: 9

22 Nov 1977

5120-12-390-2165
Mechanical Puller Adapter

123902165
F6370987: RNCC: 3 | RNVC: 2

17 Oct 2012

5120-12-391-0104
Mechanical Puller Attachment

123910104
F6555793: RNCC: 3 | RNVC: 2

15 Jan 2013

5120-12-194-9812
Mechanical Puller

121949812
1X56119913: RNCC: 3 | RNVC: 2

23 Dec 1982

5120-12-391-4050
Socket Wrench

123914050
SSG20G: RNCC: 3 | RNVC: 2

11 Mar 2013

5120-12-306-7575
Driftpin

123067575
12745: RNCC: 3 | RNVC: 2
32.053.003: RNCC: 5 | RNVC: 2
32053003: RNCC: 5 | RNVC: 2

27 Mar 1986

5120-12-189-4700
Drive Pin Punch

121894700
312589091500: RNCC: 3 | RNVC: 2

29 Sep 1981

5120-12-023-1484

5120-12-316-9942
Seal Inserter

123169942
180589006100: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-12-385-6942
Ventil Heber

123856942
62922301: RNCC: 3 | RNVC: 2

30 Jun 2011

5120-12-146-5137
Dorn

121465137
1X56099063: RNCC: 3 | RNVC: 2
V99063: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-145-9610
Montagevorrichtung

121459610
6365890731: RNCC: 3 | RNVC: 2
636589073100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-369-7716
Ventil Auszieher

123697716
4906001: RNCC: 2 | RNVC: 2
4906001: RNCC: 3 | RNVC: 2

16 Aug 2006

5120-12-388-2736
Pliers Set

123882736
BK203115: RNCC: 3 | RNVC: 2

7 Mar 2012

5120-12-385-4047
Bearing And Bushing Remover

123854047
S004907: RNCC: 3 | RNVC: 2

31 May 2011

5120-12-194-9218

5120-12-050-0826

5120-12-321-7863
Bearing And Bushing Inserter

123217863
41810-T602: RNCC: 3 | RNVC: 2

26 Jun 1990

5120-12-314-1591
Mechanical Puller

123141591
VY921021: RNCC: 3 | RNVC: 2

14 Jun 1988

5120-12-339-6004
Seal Inserter

123396004
80996040103: RNCC: 3 | RNVC: 2

11 Dec 1995

5120-12-369-2260
Torque Wrench Adapter

123692260
58211019-TCS: RNCC: 3 | RNVC: 2

7 Jun 2006

5120-12-195-1561
Spanner Wrench

121951561
80996070088: RNCC: 3 | RNVC: 2
80.99607.0088: RNCC: 5 | RNVC: 2
V1014: RNCC: 5 | RNVC: 2
51.97701.5006: RNCC: 5 | RNVC: 9

18 Jan 1983

5120-12-132-2729
Piston Ring Compressor

121322729
VW123A: RNCC: 3 | RNVC: 2
VW123A: RNCC: 3 | RNVC: 2
2523-77: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-198-3496
Fuehrungs- Platte

121983496
620 589 00 21 00: RNCC: 3 | RNVC: 2
1X56 137 121: RNCC: 3 | RNVC: 2
620589002100: RNCC: 5 | RNVC: 2

18 Jan 1984

5120-12-341-6178
Flat Tip Screwdriver Set

123416178
SZ-SORTI 1: RNCC: 3 | RNVC: 2
12 02 08 5: RNCC: 5 | RNVC: 2

2 Oct 1996

5120-12-322-8754
Torque Wrench Adapter

123228754
000589210100: RNCC: 3 | RNVC: 2

1 Oct 1990

5120-12-121-1089
Flat Tip Screwdriver

121211089
97108: RNCC: 3 | RNVC: 2
880480: RNCC: 3 | RNVC: 2
17832: RNCC: 5 | RNVC: 2
1678B1,6X8-150: RNCC: 5 | RNVC: 9
30312: RNCC: 5 | RNVC: 9
1149P150X8: RNCC: 5 | RNVC: 9
201-21: RNCC: 5 | RNVC: 9
A1-6X8X150DIN5265: RNCC: 5 | RNVC: 9
A1-6X8X150DIN5265GALNI5: RNCC: 5 | RNVC: 9
DIN5265-A1,6X8X150: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-361-5313
Hand Screw Starter

123615313
111661: RNCC: 3 | RNVC: 2

14 Oct 2003

5120-12-126-2595
Spreizfeder Zange

121262595
1IN: RNCC: 3 | RNVC: 2
1IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-027-9637

5120-12-181-5052
Spanner Wrench

121815052
321589010700: RNCC: 3 | RNVC: 9

26 Nov 1979

5120-12-163-8897
Halter

121638897
1X56134517: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-180-0991
Torque Wrench Adapter

121800991
P-896723-405: RNCC: 3 | RNVC: 2
P896723-405: RNCC: 5 | RNVC: 2
MAGERD3264: RNCC: 5 | RNVC: 9

20 Aug 1979

5120-12-336-9791
Screwdriver Bit

123369791
05072715001: RNCC: 3 | RNVC: 2
52951-080: RNCC: 3 | RNVC: 2
072715: RNCC: 3 | RNVC: 9
2110S-1,6X10: RNCC: 5 | RNVC: 2
72715: RNCC: 5 | RNVC: 9

4 Jan 1995

5120-12-325-5376
Seal Inserter

123255376
19.4700.415.3009: RNCC: 3 | RNVC: 2
19.4700.415.3009: RNCC: 5 | RNVC: 9
19.4700.500.3011POS3: RNCC: 5 | RNVC: 9

14 Jun 1991

5120-12-092-2244

5120-12-336-5075
Ku Montierwerkzeug

123365075
0851 6248: RNCC: 3 | RNVC: 2
8516248: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-139-3159
Box Wrench

121393159
820589020300: RNCC: 3 | RNVC: 2
8205890203: RNCC: 3 | RNVC: 2
022M02100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-388-6535
Installation Tool

123886535
80996060567: RNCC: 3 | RNVC: 2
80.99606-0567: RNCC: 5 | RNVC: 2

10 Apr 2012

5120-12-360-1925
Bearing And Bushing Inserter

123601925
80996040054: RNCC: 3 | RNVC: 2
80.99604-0054: RNCC: 5 | RNVC: 2

15 Apr 2003

5120-12-331-5953
Box Wrench

123315953
144130: RNCC: 3 | RNVC: 2
144 130: RNCC: 5 | RNVC: 2
81016342: RNCC: 5 | RNVC: 2
144 130: RNCC: 5 | RNVC: 9

25 May 1993

5120-12-371-5044
Dreh Haltewerkzeug

123715044
71007559: RNCC: 3 | RNVC: 2

10 Apr 2007

5120-12-350-2573
Bl Ausbeulwerkzeug

123502573
016: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-327-2728
Socket Wrench Screwdriver Attachment

123272728
140310: RNCC: 3 | RNVC: 2

3 Jan 1992

5120-12-323-8245
Face Spanner Wrench Socket

123238245
853 0895: RNCC: 3 | RNVC: 2
0853 0895: RNCC: 5 | RNVC: 2
8530895: RNCC: 5 | RNVC: 2

20 Dec 1990

5120-12-385-5569
Rotating Members Aligning Tool

123855569
Y4277016: RNCC: 3 | RNVC: 2

15 Jun 2011

5120-12-172-0487
Socket Wrench

121720487
6400M7: RNCC: 3 | RNVC: 2
157295: RNCC: 5 | RNVC: 2

13 Dec 1977

5120-12-137-2683

5120-12-185-9322
Schluesseleinsatz

121859322
5870656030: RNCC: 3 | RNVC: 2
2250310: RNCC: 5 | RNVC: 2
5870656030: RNCC: 5 | RNVC: 9

11 Nov 1980

5120-12-365-7563
Zange Einsatz

123657563
CBD32063P04: RNCC: 3 | RNVC: 2

1 Feb 2005

5120-12-176-6773
Druckstueck

121766773
425589013400: RNCC: 3 | RNVC: 2

13 Dec 1978

5120-12-383-7554
Hand Timber Carrier

123837554
KFP: RNCC: 3 | RNVC: 2

3 Dec 2010

5120-12-313-7909
Ratchet Wrench

123137909
31KR15: RNCC: 3 | RNVC: 2
625 388: RNCC: 5 | RNVC: 2

5 May 1988

5120-12-041-2678

5120-12-368-8274
Socket Wrench Screwdriver Attachment

123688274
3245TXL 30: RNCC: 3 | RNVC: 2
00.50.32.85: RNCC: 5 | RNVC: 2

26 Apr 2006

5120-12-336-6461
Montierhuelse

123366461
09990000004: RNCC: 3 | RNVC: 2

5 Dec 1994

5120-12-301-8780
Auszieher

123018780
4984004: RNCC: 3 | RNVC: 2

14 Nov 1984

5120-12-382-7489
Drive Pin Punch

123827489
70070005-TCS: RNCC: 3 | RNVC: 2

4 Aug 2010

5120-12-126-3067
Flat Tip Screwdriver

121263067
71013: RNCC: 3 | RNVC: 2
810-10X250: RNCC: 3 | RNVC: 2
810-250X10MM: RNCC: 5 | RNVC: 2
19690-59R2058D40: RNCC: 5 | RNVC: 2
DIN5265-A2X10X250: RNCC: 5 | RNVC: 9
200-8: RNCC: 5 | RNVC: 9
A2X10X250DIN5265: RNCC: 5 | RNVC: 9
A2X10X250DIN5265GALNI5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-173-2293
Mechanical Puller

121732293
009-017-200-000W68: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-12-340-7665
Torque Wrench

123407665
R810637: RNCC: 3 | RNVC: 2
MINI: RNCC: 5 | RNVC: 2

6 Jun 1996

5120-12-340-8297
Drive Pin Punch Set

123408297
7180012: RNCC: 3 | RNVC: 2

20 Jun 1996

5120-12-198-3399
Flat Tip Screwdriver

121983399
402-8: RNCC: 3 | RNVC: 2

18 Jan 1984

5120-12-359-6704
Mechanical Puller

123596704
T623P3001051: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-163-5261
Abziehvorrichtung

121635261
60436300: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-337-2242
Socket Wrench Socket

123372242
11.49001-0326: RNCC: 3 | RNVC: 2
221.040: RNCC: 5 | RNVC: 2
11.49001-0326: RNCC: 5 | RNVC: 9
221.040: RNCC: 5 | RNVC: 9

3 Feb 1995

5120-12-700-0806
Spanner Wrench

127000806
51-00086010094: RNCC: 2 | RNVC: 2

25 Jun 1991

5120-12-164-8072
Offset Screwdriver

121648072
NO PRIMARY REF 12-164-8072: RNCC: 3 | RNVC: 2
106052: RNCC: 5 | RNVC: 9
2047-26: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-140-3495
Electronic Equipment Alignment Tool

121403495
NO PRIMARY REF 12-140-3495: RNCC: 3 | RNVC: 2
108755: RNCC: 5 | RNVC: 9
5600G: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-374-6367
Centering Ring

123746367
2383AS-1G: RNCC: 3 | RNVC: 2

3 Mar 2008

5120-12-329-3297
Socket Head Screw Key

123293297
591801-9009.000: RNCC: 3 | RNVC: 2
591801-9009-000: RNCC: 5 | RNVC: 2

6 Aug 1992

5120-12-123-5371
Socket Wrench

121235371
DIN896-A41X46: RNCC: 2 | RNVC: 2
A41X46DIN896: RNCC: 5 | RNVC: 2
A41X46DIN896GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-3214

5120-12-196-4803
Mechanical Puller

121964803
1X56136501: RNCC: 3 | RNVC: 2

11 Jul 1983

5120-12-133-6831

5120-12-384-0771
Inspection Mirror

123840771
550.1138: RNCC: 3 | RNVC: 2

19 Jan 2011

5120-12-161-4666
Abziehvorrichtung

121614666
7001803000000: RNCC: 3 | RNVC: 2
70018030000000: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-360-4957
Mechanical Puller

123604957
CBD30031G01: RNCC: 3 | RNVC: 2

27 May 2003

5120-12-368-8219
Socket Wrench Screwdriver Attachment

123688219
02050007-TCS: RNCC: 3 | RNVC: 2

25 Apr 2006

5120-12-163-5259
Ausziehvorrichtung

121635259
60410100: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-130-1309
Spanner Wrench

121301309
771-20-42: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-384-8305
Drift Punch

123848305
46.000.044: RNCC: 3 | RNVC: 2

1 Apr 2011

5120-12-311-2991
Socket Wrench Extension

123112991
427-1,5: RNCC: 3 | RNVC: 2
427K: RNCC: 5 | RNVC: 9

13 Aug 1987

5120-12-194-0457
Drift Punch

121940457
60019: RNCC: 3 | RNVC: 2
M20107/4: RNCC: 5 | RNVC: 2
790531577: RNCC: 5 | RNVC: 2
C 6706 710: RNCC: 5 | RNVC: 2
C 6706 710: RNCC: 5 | RNVC: 2

27 Sep 1982

5120-12-123-5940
Socket Wrench Crowfoot Attachment

121235940
1950Z3-4: RNCC: 3 | RNVC: 2
440A-3/4: RNCC: 3 | RNVC: 2
105608: RNCC: 5 | RNVC: 2
440A3-4IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-372-7554
Spatula

123727554
5/5: RNCC: 3 | RNVC: 2

17 Aug 2007

5120-12-364-9203
Screwdriver Bit

123649203
02060008-TCS: RNCC: 3 | RNVC: 2

16 Nov 2004

5120-12-168-7653
Stiftauszi Einsatz

121687653
4900072-011000: RNCC: 2 | RNVC: 2
100332-10000W4: RNCC: 3 | RNVC: 2
4900072-011000: RNCC: 5 | RNVC: 2
100332-10000W4: RNCC: 5 | RNVC: 9
4900072-011000: RNCC: 5 | RNVC: 9

6 Apr 1977

5120-12-703-1180
Pliers

127031180
139-006-11: RNCC: 3 | RNVC: 2

3 Dec 1997

5120-12-166-1966
Schlagstange

121661966
8524216: RNCC: 3 | RNVC: 2
8207-636: RNCC: 5 | RNVC: 2

12 Aug 1976

5120-12-124-2409
Driftpin

121242409
299660: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-364-1731
Ge Montierwerkzeug

123641731
F6347310: RNCC: 3 | RNVC: 2

27 Aug 2004

5120-12-196-9883
Face Spanner Wrench Socket

121969883
01TC32247: RNCC: 3 | RNVC: 2

7 Sep 1983

5120-12-168-3687
Schluessel

121683687
2360-264308.00.0: RNCC: 2 | RNVC: 2
90600932000002: RNCC: 3 | RNVC: 2
2360-264308.00.0: RNCC: 3 | RNVC: 2
2360-264308.00.0: RNCC: 5 | RNVC: 2
2360-264308-00-0: RNCC: 5 | RNVC: 2
906093: RNCC: 5 | RNVC: 2
2360-264308-00-0: RNCC: 5 | RNVC: 2
2360-264308-00-0: RNCC: 5 | RNVC: 9
2360-264308.00.0: RNCC: 5 | RNVC: 9

10 Mar 1977

5120-12-126-2035
Hand Vise

121262035
51013125: RNCC: 3 | RNVC: 2
51013500: RNCC: 3 | RNVC: 9
4321-29: RNCC: 5 | RNVC: 2
51013-125: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-360-3285
Screwdriver Bit

123603285
9015810070: RNCC: 3 | RNVC: 2

9 May 2003

5120-12-319-6857
Montierwerk Huelse

123196857
4900059-751800.000.0/5: RNCC: 3 | RNVC: 2

25 Oct 1989

5120-12-199-0789
Tool

121990789
RTM20-5: RNCC: 3 | RNVC: 2

23 Mar 1984

5120-12-316-8257
Torque Wrench

123168257
730AR/5: RNCC: 3 | RNVC: 2

16 Feb 1989

5120-12-147-6420
Vorg Sperr- Hebel

121476420
2895-039: RNCC: 3 | RNVC: 2
2895039: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-172-1872
Socket Wrench Crowfoot Attachment

121721872
3S51613-0000: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-362-3455
Torque Wrench Set

123623455
6635-00126: RNCC: 3 | RNVC: 2
6635-00126: RNCC: 6 | RNVC: 9

10 Feb 2004

5120-12-368-8140
Rohr- Zange

123688140
136-315: RNCC: 3 | RNVC: 2
00.13.39.78: RNCC: 5 | RNVC: 2

24 Apr 2006

5120-12-371-3648
Socket Wrench Screwdriver Attachment

123713648
3510-IN 7: RNCC: 3 | RNVC: 2
00.47.22.66: RNCC: 5 | RNVC: 2

20 Mar 2007

5120-12-171-5361
Spanner Wrench

121715361
1239-07W1: RNCC: 3 | RNVC: 2
1239-07W1: RNCC: 5 | RNVC: 2
1239-07W1: RNCC: 5 | RNVC: 9

21 Oct 1977

5120-12-305-4987
Hand Abrasive Wheel Dresser

123054987
W12-01-564: RNCC: 3 | RNVC: 2

14 Nov 1985

5120-12-702-7553
Schluessel

127027553
40-13706617202: RNCC: 2 | RNVC: 2

13 Dec 1995

5120-12-338-3138
Box Wrench

123383138
DIN3111-27: RNCC: 2 | RNVC: 2

21 Jun 1995

5120-12-342-6104
Crimping Tool Die

123426104
VG95236T11AA105: RNCC: 2 | RNVC: 2
MRP0847: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-010-9611

5120-12-172-0099
Socket Wrench

121720099
1945NBM14: RNCC: 3 | RNVC: 9
105341: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-384-8053
Blacksmith's Anvil

123848053
51.000.010: RNCC: 3 | RNVC: 2
51.000.010: RNCC: 5 | RNVC: 2

30 Mar 2011

5120-12-359-8098
Auswechs Klemmteil

123598098
T623P3002101: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-12-388-5622
Bearing Installation Tool Base

123885622
030.515: RNCC: 3 | RNVC: 2

30 Mar 2012

5120-12-301-3645
Plier Wrench

123013645
NO PRIMARY REF 12-301-3645: RNCC: 3 | RNVC: 2
166AF: RNCC: 5 | RNVC: 9
166AF: RNCC: 5 | RNVC: 9
166AF-N: RNCC: 5 | RNVC: 9
166AF-N: RNCC: 5 | RNVC: 9

10 Oct 1984

5120-12-348-6077
Socket Wrench Set

123486077
622210-9: RNCC: 3 | RNVC: 2
62221-9T: RNCC: 5 | RNVC: 9

26 Jul 1999

5120-12-314-8381
Hand Hammer

123148381
802-40: RNCC: 3 | RNVC: 2
267-40: RNCC: 3 | RNVC: 2
51216140: RNCC: 5 | RNVC: 2
176567: RNCC: 5 | RNVC: 9
3625R-40: RNCC: 5 | RNVC: 9
1954-4: RNCC: 5 | RNVC: 9

17 Aug 1988

5120-12-348-7348
Fuel Injection Nozzle Extractor

123487348
F30371763: RNCC: 3 | RNVC: 2

11 Aug 1999

5120-12-364-2909
Socket Wrench Handle

123642909
12100002-TCS: RNCC: 3 | RNVC: 2

8 Sep 2004

5120-12-364-3478
Socket Head Screw Key Set

123643478
96432602-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-312-7490
Spanner Wrench

123127490
272.323 961: RNCC: 2 | RNVC: 2
272.323 961: RNCC: 3 | RNVC: 2

2 Feb 1988

5120-12-317-1477
Crimping Tool Die

123171477
300455460: RNCC: 3 | RNVC: 2

14 Mar 1989

5120-12-139-2471
Kurb Verlaengerung

121392471
014M05500: RNCC: 3 | RNVC: 2
VM51960: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-130-7397
Screwdriver Bit

121307397
820H5-5-3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-309-9706
Spanner Wrench

123099706
4.124-E2-1: RNCC: 3 | RNVC: 9

24 Mar 1987

5120-12-350-4818
Fuehrungs- Platte

123504818
26-21C1360G003P32: RNCC: 3 | RNVC: 2

5 Apr 2000

5120-12-126-1598
Pliers

121261598
NO PRIMARY REF 12-126-1598: RNCC: 3 | RNVC: 2
1106-180: RNCC: 5 | RNVC: 9
1106: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-354-3821
Fixed Open End Wrench Set

123543821
W00025: RNCC: 3 | RNVC: 2
61091-13: RNCC: 5 | RNVC: 2

5 Jul 2001

5120-12-349-9403
Socket Wrench Set

123499403
45/14/5I: RNCC: 3 | RNVC: 2
96020132: RNCC: 5 | RNVC: 2

26 Jan 2000

5120-12-389-5277
Socket Wrench Socket

123895277
01010035-TCS: RNCC: 3 | RNVC: 2

17 Jul 2012

5120-12-369-0369
Open End Wrench

123690369
40060404-TCS: RNCC: 3 | RNVC: 2

16 May 2006

5120-12-331-0694
Retaining Ring Pliers

123310694
71996A1S: RNCC: 3 | RNVC: 9

18 Mar 1993

5120-12-154-2540
Box Wrench

121542540
3TS47T12612: RNCC: 3 | RNVC: 2
3TS47T12612: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-302-6483
Drive Pin Punch

123026483
NO PRIMARY REF 12-302-6483: RNCC: 3 | RNVC: 2
107561: RNCC: 5 | RNVC: 9
3659SP-1.9: RNCC: 5 | RNVC: 9
3659SP1,9: RNCC: 5 | RNVC: 9

18 Jan 1985

5120-12-126-5816
Jack Elevating Block

121265816
2843-017: RNCC: 3 | RNVC: 2
2843-030: RNCC: 5 | RNVC: 2
2843017: RNCC: 5 | RNVC: 2
2843030: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-374-4047
Screwdriver Bit

123744047
930589003300: RNCC: 3 | RNVC: 2
KL1559-2DC: RNCC: 5 | RNVC: 2

14 Feb 2008

5120-12-141-2954
Open End Wrench

121412954
NO PRIMARY REF 12-141-2954: RNCC: 3 | RNVC: 2
1929Z5-16X7-16IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-175-2793
Sheet Metalworking Dolly Block

121752793
NO PRIMARY REF 12-175-2793: RNCC: 3 | RNVC: 2
107614: RNCC: 5 | RNVC: 9
3736: RNCC: 5 | RNVC: 9

6 Sep 1978

5120-12-156-1558
Socket Wrench Handle Ratchet Head

121561558
CH1772-42-5NM: RNCC: 3 | RNVC: 2
CH1772-42-5NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-3057
Hand Hammer

121263057
5081ES565: RNCC: 3 | RNVC: 2
50811021250: RNCC: 5 | RNVC: 2
107302: RNCC: 5 | RNVC: 9
3500NB570: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-139-8581

5120-12-314-0874
Bearing And Bushing Inserter And Remover

123140874
131320: RNCC: 3 | RNVC: 2
E6482-00-00: RNCC: 5 | RNVC: 2
698-758-0000: RNCC: 5 | RNVC: 2

4 Jun 1988

5120-12-140-6258
Magnetic Retrieving Tool

121406258
TL5120-0131-001: RNCC: 2 | RNVC: 2
410/02: RNCC: 3 | RNVC: 2
121D20: RNCC: 5 | RNVC: 9
121D24: RNCC: 5 | RNVC: 9
5120-12-196-4553: RNCC: 6 | RNVC: 9
5120-45202: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-173-0336
Spanner Wrench

121730336
702993-0190901: RNCC: 3 | RNVC: 2
702993-0190.901: RNCC: 5 | RNVC: 2

15 Mar 1978

5120-12-327-7178
Gewindeein Spindel

123277178
01500676620: RNCC: 3 | RNVC: 2
0150 0676 620: RNCC: 5 | RNVC: 2
0150-0676-620: RNCC: 5 | RNVC: 2

24 Feb 1992

5120-12-353-6071
Drive Pin Punch

123536071
1111683: RNCC: 3 | RNVC: 2

17 Apr 2001

5120-12-150-8929
Spanner Wrench

121508929
DIN1810-B68-75: RNCC: 2 | RNVC: 2
08062011710: RNCC: 3 | RNVC: 2
68-75-1810Z: RNCC: 3 | RNVC: 2
B68-75DIN1810: RNCC: 5 | RNVC: 2
DIN1810B68-75: RNCC: 5 | RNVC: 9
154179: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-180-1616
Screwdriver Bit

121801616
54CV12: RNCC: 3 | RNVC: 2
3041 12: RNCC: 3 | RNVC: 2
991-12: RNCC: 3 | RNVC: 2
50-34-12: RNCC: 3 | RNVC: 2
00050340583: RNCC: 5 | RNVC: 2
F30027754: RNCC: 5 | RNVC: 2
03090012: RNCC: 5 | RNVC: 2
2487180012: RNCC: 5 | RNVC: 9

27 Aug 1979

5120-12-126-6543

5120-12-129-3300

5120-12-369-7490
Eindrueckwerkzeug

123697490
437589114300: RNCC: 3 | RNVC: 2
7083657: RNCC: 5 | RNVC: 2

15 Aug 2006

5120-12-094-1309

5120-12-357-7813
Pliers

123577813
2201140: RNCC: 3 | RNVC: 2
DIN5257-A140: RNCC: 4 | RNVC: 1
71050-140: RNCC: 5 | RNVC: 2
773/140: RNCC: 5 | RNVC: 2
710500-140: RNCC: 5 | RNVC: 2

23 Jul 2002

5120-12-325-3332
Ratchet Wrench

123253332
NO PRIMARY REF 12-325-3332: RNCC: 3 | RNVC: 2
1322Z7/16: RNCC: 5 | RNVC: 9
174246: RNCC: 5 | RNVC: 9

27 May 1991

5120-12-348-6010
Fixed Open End Wrench Set

123486010
TL5120-0101-156: RNCC: 2 | RNVC: 2
12/15PC: RNCC: 3 | RNVC: 2
61240-15T: RNCC: 5 | RNVC: 9

23 Jul 1999

5120-12-090-1344

5120-12-336-0970
Drahtwickler

123360970
08L682: RNCC: 3 | RNVC: 2

24 Oct 1994

5120-12-387-3234
Spanner Wrench

123873234
249027: RNCC: 3 | RNVC: 2

29 Nov 2011

5120-12-349-4035
Spanner Wrench

123494035
0986611738: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-146-2856
Dorn

121462856
1215890043: RNCC: 3 | RNVC: 2
121589004300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-022-0307

5120-12-193-4247
Bearing And Bushing Inserter

121934247
460589101500: RNCC: 3 | RNVC: 2

21 Jul 1982

5120-12-129-5868

5120-12-360-8016
Montierdorn

123608016
MTD0020: RNCC: 3 | RNVC: 2

11 Jul 2003

5120-12-305-8083
Bearing And Bushing Inserter

123058083
TK-BA35-5120-463: RNCC: 2 | RNVC: 2
237-112.0005.4: RNCC: 3 | RNVC: 2
237-112.0005.4: RNCC: 5 | RNVC: 9

17 Dec 1985

5120-12-178-2870
Montagevorrichtung

121782870
11365-645: RNCC: 3 | RNVC: 2

12 Apr 1979

5120-12-129-3310
Open End Wrench

121293310
350-BSW3/8X7/16: RNCC: 3 | RNVC: 2
039715: RNCC: 3 | RNVC: 2
TVA5120-2-263-028: RNCC: 5 | RNVC: 1
TVA5120-2-263-028-1.1.34: RNCC: 5 | RNVC: 2
227706: RNCC: 5 | RNVC: 9
6-3-8X7-16: RNCC: 5 | RNVC: 9
6-3-8X7-16: RNCC: 5 | RNVC: 9
450W3-8X7-16: RNCC: 5 | RNVC: 9
10E3/8X7/16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-366-1953
Tool Handle Wedge

123661953
TL5120-0137-030: RNCC: 2 | RNVC: 2
8594190: RNCC: 3 | RNVC: 2
E-5-300: RNCC: 3 | RNVC: 9
4010883859417: RNCC: 5 | RNVC: 2
E-5-300: RNCC: 5 | RNVC: 2
4010883859417: RNCC: 5 | RNVC: 9
8594190: RNCC: 5 | RNVC: 9

18 Mar 2005

5120-12-150-6255
Schluessel

121506255
510277: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-172-6372
Einstellvorrichtung

121726372
1X56103751: RNCC: 3 | RNVC: 2
V103751: RNCC: 5 | RNVC: 2

31 Jan 1978

5120-12-140-0255
Hand Hammer

121400255
477BSB3000: RNCC: 3 | RNVC: 2
477BSB3000: RNCC: 3 | RNVC: 9
A3SDIN1042: RNCC: 4 | RNVC: 1
235-3MST: RNCC: 5 | RNVC: 9
9042: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-322-8836
Tool

123228836
01500284830: RNCC: 3 | RNVC: 2

2 Oct 1990

5120-12-366-8555
Socket Head Screw Key Set

123668555
4730XESD: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-12-363-9842
Bearing And Bushing Inserter

123639842
T671P5002255: RNCC: 3 | RNVC: 2

10 Aug 2004

5120-12-382-6768
Face Spanner Wrench Socket

123826768
0928140: RNCC: 3 | RNVC: 2

23 Jul 2010

5120-12-335-3148
Zentrier- Ring

123353148
0852 3139: RNCC: 3 | RNVC: 2
8523139: RNCC: 5 | RNVC: 2

9 Aug 1994

5120-12-383-4101
Spanner Wr Adapter

123834101
000-164: RNCC: 3 | RNVC: 2

18 Oct 2010

5120-12-311-8226
Spanner Wrench

123118226
32 400 0850 00 001: RNCC: 3 | RNVC: 2
9043565: RNCC: 5 | RNVC: 2

20 Oct 1987

5120-12-302-8026
Face Spanner Wrench Socket

123028026
406589020700: RNCC: 3 | RNVC: 2

30 Jan 1985

5120-12-319-4524
Lager- Und Einsatz

123194524
99374118: RNCC: 3 | RNVC: 2

3 Oct 1989

5120-12-156-1665
Chain Type Ratchet Lever Puller

121561665
NM545: RNCC: 3 | RNVC: 2
NM545: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-375-5300
Hand Vise

123755300
00008810401: RNCC: 3 | RNVC: 2

11 Jun 2008

5120-12-131-6818

5120-12-340-1988
Mechanical Puller Attachment

123401988
80996060305: RNCC: 3 | RNVC: 2
9157994000: RNCC: 3 | RNVC: 2
915799-4000: RNCC: 5 | RNVC: 2

13 Mar 1996

5120-12-145-9295
Rohrvor Schluessel

121459295
25704-360300.04.0: RNCC: 2 | RNVC: 2
25704-360300-04-0: RNCC: 3 | RNVC: 2
25704-360300.04.0: RNCC: 3 | RNVC: 2
25704-360300-04-0: RNCC: 3 | RNVC: 2
25704-360300.04.0: RNCC: 3 | RNVC: 2
25704-360300.04.0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5215
Box Wrench

121235215
NO PRIMARY REF 12-123-5215: RNCC: 3 | RNVC: 2
2-25-27: RNCC: 5 | RNVC: 9
235369: RNCC: 5 | RNVC: 9
235369: RNCC: 5 | RNVC: 9
2C-25X27: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-333-0420
Hose Strap Band Clamping Tool

123330420
GS4EH: RNCC: 3 | RNVC: 2

21 Oct 1993

5120-12-330-3158
Machinist's Vise

123303158
10815: RNCC: 3 | RNVC: 2
10815: RNCC: 5 | RNVC: 9

2 Dec 1992

5120-12-368-8087
Combination Box And Open End Wrench

123688087
40101111-TCS: RNCC: 3 | RNVC: 2

24 Apr 2006

5120-12-306-8049
Seal Inserter

123068049
9998622: RNCC: 3 | RNVC: 2
SE296000A: RNCC: 5 | RNVC: 2
81761223: RNCC: 5 | RNVC: 9
SE 296000A: RNCC: 5 | RNVC: 9

3 Apr 1986

5120-12-325-8934
Adjustable Wrench

123258934
592 00 04: RNCC: 3 | RNVC: 2

19 Jul 1991

5120-12-382-3778
Six Point Tip Screwdriver

123823778
7904827: RNCC: 3 | RNVC: 2

14 Jun 2010

5120-12-343-3840
Montierhuelse

123433840
418589064300: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-141-0937

5120-12-094-1294

5120-12-123-5276
Combination Box And Open End Wrench

121235276
600NA-1.5/8: RNCC: 3 | RNVC: 2
13A1 5-8: RNCC: 3 | RNVC: 2
40486666: RNCC: 5 | RNVC: 2
04360: RNCC: 5 | RNVC: 9
1506120020: RNCC: 5 | RNVC: 9
600A-1 5/8: RNCC: 5 | RNVC: 9
600A1 5-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-196-4552
Magnetic Retrieving Tool

121964552
360/1: RNCC: 3 | RNVC: 2
51156010: RNCC: 3 | RNVC: 2

11 Jul 1983

5120-12-307-9260

5120-12-170-8414
Spanner Wrench

121708414
106769: RNCC: 3 | RNVC: 2
106769: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-316-3072
Socket Head Screw Key Blade

123163072
9922BP: RNCC: 3 | RNVC: 2
42520300: RNCC: 3 | RNVC: 9
99-22BP: RNCC: 5 | RNVC: 9

9 Jan 1989

5120-12-347-3370
Trowel

123473370
691-165: RNCC: 3 | RNVC: 2

30 Nov 1998

5120-12-300-5554
Drive Pin Punch

123005554
AZ0468-15: RNCC: 3 | RNVC: 2
F48912: RNCC: 5 | RNVC: 9

14 Aug 1984

5120-12-171-0616
Schluessel

121710616
12706-1000W11: RNCC: 2 | RNVC: 2
335930-9009.000: RNCC: 3 | RNVC: 2
12706-1000W11: RNCC: 5 | RNVC: 2
335930-9009.000: RNCC: 5 | RNVC: 9

5 Sep 1977

5120-12-135-7853
Ausbauvorrichtung

121357853
WA28449: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-327-1564
Aligning Punch

123271564
01TC33516: RNCC: 3 | RNVC: 2

9 Dec 1991

5120-12-092-2252

5120-12-319-4526
Lager- Und Einsatz

123194526
99366653: RNCC: 3 | RNVC: 2

3 Oct 1989

5120-12-313-2864
Socket Wrench

123132864
49 2410 81: RNCC: 3 | RNVC: 2

18 Mar 1988

5120-12-126-1303

5120-12-192-7108
Spanner Wrench

121927108
01TC34403: RNCC: 3 | RNVC: 2
01TC33500: RNCC: 5 | RNVC: 9

17 May 1982

5120-12-368-2534
Cross Tip Screwdriver

123682534
47311001-TCS: RNCC: 3 | RNVC: 2

17 Jan 2006

5120-12-380-2462
Hand Roller

123802462
125.585: RNCC: 3 | RNVC: 2

9 Oct 2009

5120-12-126-2133

5120-12-313-8819
Box Wrench

123138819
4201012: RNCC: 3 | RNVC: 2

17 May 1988

5120-12-368-8550
Socket Wrench Handle

123688550
770-S3: RNCC: 3 | RNVC: 2
00.52.03.62: RNCC: 5 | RNVC: 2

28 Apr 2006

5120-12-022-0304

5120-12-130-6248
Open End Wrench

121306248
LG142631: RNCC: 3 | RNVC: 2
WZ32: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-325-5541
Socket Wrench

123255541
DIN896B30X34: RNCC: 2 | RNVC: 2

17 Jun 1991

5120-12-352-3336
Drive Pin Punch

123523336
22015.0.00.100.00P0S.4: RNCC: 3 | RNVC: 2

8 Nov 2000

5120-12-371-4160
Ge Montierwerkzeug

123714160
VM76853: RNCC: 3 | RNVC: 2

27 Mar 2007

5120-12-123-5385

5120-12-379-6309
Mechanical Puller

123796309
8546603: RNCC: 3 | RNVC: 2

18 Aug 2009

5120-12-387-4014
Hand Terminal Crimping Tool

123874014
6365-CT: RNCC: 3 | RNVC: 2
6365-CT: RNCC: 5 | RNVC: 2

9 Dec 2011

5120-12-163-8887
Abzieher

121638887
VG95211-ML-121638887: RNCC: 2 | RNVC: 2
1X56 122 267: RNCC: 3 | RNVC: 2
1X56122267: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-173-1826
Flat Tip Screwdriver

121731826
D5270-A6-Z3: RNCC: 3 | RNVC: 2
TFS00-08139: RNCC: 5 | RNVC: 9
D5270A6Z3: RNCC: 5 | RNVC: 9

22 Mar 1978

5120-12-374-9594
Socket Head Screw Key Set

123749594
HFU411-238-58: RNCC: 3 | RNVC: 2

9 Apr 2008

5120-12-364-6812
Socket Wrench Socket

123646812
02020016-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-353-4542
Drain Plug Wrench

123534542
3703: RNCC: 3 | RNVC: 2
018932: RNCC: 5 | RNVC: 2

26 Mar 2001

5120-12-314-2771
Montierhuelse

123142771
0852 8759: RNCC: 3 | RNVC: 2
8528759: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-343-3849
Montierhuelse

123433849
437589003300: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-335-3156
Spanner Wrench

123353156
0852 5028: RNCC: 3 | RNVC: 2
8525028: RNCC: 5 | RNVC: 2

9 Aug 1994

5120-12-340-3485
Hand Intrenching Tool

123403485
KLAPPSPATEN: RNCC: 3 | RNVC: 2

28 Mar 1996

5120-12-130-7896
Screwdriver Bit

121307896
NO PRIMARY REF 12-130-7896: RNCC: 3 | RNVC: 2
75Z7-32: RNCC: 5 | RNVC: 9
114728: RNCC: 5 | RNVC: 9
7090Z7-32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-179-9690
Buchse

121799690
80996060095: RNCC: 3 | RNVC: 2
80.99606-0095: RNCC: 5 | RNVC: 2
142480-8: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-130-9339
Socket Wrench Socket

121309339
NO PRIMARY REF 12-130-9339: RNCC: 3 | RNVC: 2
109577: RNCC: 5 | RNVC: 9
7420Z3-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-324-9967
Retaining Ring Pliers

123249967
NO PRIMARY REF 12-324-9967: RNCC: 3 | RNVC: 2
5374510005: RNCC: 5 | RNVC: 2
1844D-8: RNCC: 5 | RNVC: 9

22 Apr 1991

5120-12-126-3318
Hand Hammer

121263318
DIN1041-150S: RNCC: 2 | RNVC: 2
150SDIN1041: RNCC: 5 | RNVC: 2
2-150MST: RNCC: 5 | RNVC: 9
102050: RNCC: 5 | RNVC: 9
342A150: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-387-6315
Pinch Bar

123876315
9999260-971000.001.0: RNCC: 3 | RNVC: 2

18 Jan 2012

5120-12-175-6775
Spanner Wrench

121756775
6723718: RNCC: 3 | RNVC: 9
RAR1932: RNCC: 5 | RNVC: 2

10 Oct 1978

5120-12-386-0036
Craftsman's Tweezers

123860036
92 84 18: RNCC: 3 | RNVC: 2
391119116508: RNCC: 6 | RNVC: 9

28 Jul 2011

5120-12-139-3072
Einstell- Dorn

121393072
010M01800: RNCC: 3 | RNVC: 2
8205894863: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-321-1142
Cementing And Vulcanizing Stitcher

123211142
5961027: RNCC: 3 | RNVC: 2

28 Mar 1990

5120-12-139-2492
Socket Wrench Socket

121392492
027M01800: RNCC: 3 | RNVC: 2
VM71639: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-182-5248
Spezial- Schluessel

121825248
VW381-14: RNCC: 3 | RNVC: 9

8 Feb 1980

5120-12-126-1524
Spatula

121261524
DIN7216-A50: RNCC: 2 | RNVC: 2
1666-50: RNCC: 3 | RNVC: 2
A50DIN7216: RNCC: 5 | RNVC: 2
01666005000: RNCC: 5 | RNVC: 2
DIN7216A50: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-149-6896

5120-12-342-1207
Socket Wrench Set

123421207
1425AU: RNCC: 3 | RNVC: 2
00.45.53.91: RNCC: 5 | RNVC: 2
40A/8/4: RNCC: 5 | RNVC: 9
96014102: RNCC: 5 | RNVC: 9

13 Dec 1996

5120-12-175-9173
Box Wrench Set

121759173
23/8: RNCC: 3 | RNVC: 2
96410704: RNCC: 5 | RNVC: 2
2SM8: RNCC: 5 | RNVC: 9
100185: RNCC: 5 | RNVC: 9

25 Oct 1978

5120-12-146-2966
Vors Ausziehbuchse

121462966
4015890833: RNCC: 3 | RNVC: 2
401589083300: RNCC: 5 | RNVC: 2
4015890833: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-172-0198
Hand Vise

121720198
51016130: RNCC: 3 | RNVC: 9
51016-130: RNCC: 5 | RNVC: 9
3351-130: RNCC: 5 | RNVC: 9
576D009-130: RNCC: 5 | RNVC: 9
3044A130: RNCC: 5 | RNVC: 9

8 Dec 1977

5120-12-120-6007
Socket Wrench

121206007
14018903500: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-368-1103
Cross Tip Screwdriver

123681103
47360004-TCS: RNCC: 3 | RNVC: 2

8 Dec 2005

5120-12-348-6471
Torque Wrench Adapter

123486471
8791-10: RNCC: 3 | RNVC: 2

29 Jul 1999

5120-12-182-5580
Mechanical Puller

121825580
3906-08000-000: RNCC: 3 | RNVC: 9
WU41A: RNCC: 5 | RNVC: 9

11 Feb 1980

5120-12-364-5923
Einstel Schluessel

123645923
80996036007: RNCC: 3 | RNVC: 2
80.99603-6007: RNCC: 5 | RNVC: 2

13 Oct 2004

5120-12-304-2808
Cross Tip Screwdriver

123042808
CF 454 354 AE: RNCC: 2 | RNVC: 2
CF 454 354 AE: RNCC: 3 | RNVC: 2
CF 454 354 -E: RNCC: 5 | RNVC: 9
CF 454 354 -E: RNCC: 5 | RNVC: 9

5 Jul 1985

5120-12-314-8384
Hole Sheet Metal Holder

123148384
219-2072KU-3,2: RNCC: 3 | RNVC: 2

17 Aug 1988

5120-12-351-9583
Socket Head Screw Key

123519583
ISO2936-2,5L: RNCC: 2 | RNVC: 2
07153118: RNCC: 3 | RNVC: 2

20 Sep 2000

5120-12-163-3495
Socket Wrench Crowfoot Attachment

121633495
1950M41: RNCC: 3 | RNVC: 2
105593: RNCC: 5 | RNVC: 2
1950M41MM: RNCC: 6 | RNVC: 9
1L640: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-174-5633
Aufziehvorrichtung

121745633
V45812: RNCC: 3 | RNVC: 2

10 Jul 1978

5120-12-336-5499

5120-12-023-6053

5120-12-329-4316
Spanner Wrench

123294316
081-140172-000-0: RNCC: 2 | RNVC: 2
081-140172-000-0: RNCC: 3 | RNVC: 2

19 Aug 1992

5120-12-126-1792
Drill Guide

121261792
TL5120-0052-120A: RNCC: 2 | RNVC: 2
1418F: RNCC: 3 | RNVC: 2
104055: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-092-2883

5120-12-380-6594
Ratchet Wrench

123806594
503.4810: RNCC: 3 | RNVC: 2

17 Nov 2009

5120-12-172-1844
Spanner Wrench

121721844
903-812-0083: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-133-3615
Open End Wrench

121333615
NO PRIMARY REF 12-133-3615: RNCC: 3 | RNVC: 2
105816: RNCC: 5 | RNVC: 9
1953M20X22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-9950
Socket Wrench Socket

121719950
6300M4-5: RNCC: 3 | RNVC: 2
108760: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-175-5674
Cross Tip Screwdriver

121755674
C8078-2: RNCC: 3 | RNVC: 2
292-2X100: RNCC: 5 | RNVC: 2
148679: RNCC: 5 | RNVC: 2

27 Sep 1978

5120-12-317-1426
Combination Box And Open End Wrench

123171426
111Z-7/16: RNCC: 3 | RNVC: 2
1828974: RNCC: 5 | RNVC: 2
111AF-C7/16: RNCC: 5 | RNVC: 9
7Z-7/16: RNCC: 5 | RNVC: 9

14 Mar 1989

5120-12-310-5396
Seal Inserter

123105396
80996170075: RNCC: 3 | RNVC: 2
80.99617.0075: RNCC: 5 | RNVC: 2

29 May 1987

5120-12-180-0963
Socket Wrench Crowfoot Attachment

121800963
320-991110: RNCC: 3 | RNVC: 2

20 Aug 1979

5120-12-324-0714
Hole Sheet Metal Holder

123240714
220-2072KU-35: RNCC: 3 | RNVC: 2
2072KU35: RNCC: 5 | RNVC: 2

18 Jan 1991

5120-12-149-5872
Socket Wrench

121495872
NO PRIMARY REF 12-149-5872: RNCC: 3 | RNVC: 2
105167: RNCC: 5 | RNVC: 9
1936Z1-1-8X1-1-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-361-1780
Mechanical Puller Attachment

123611780
80996280096: RNCC: 3 | RNVC: 2
80.99628-0096: RNCC: 5 | RNVC: 2

1 Sep 2003

5120-12-336-2999
Driftpin

123362999
5306-0011-200000: RNCC: 3 | RNVC: 2

9 Nov 1994

5120-12-195-2640
Socket Wrench Socket

121952640
C7800 15: RNCC: 3 | RNVC: 2
420 6574: RNCC: 3 | RNVC: 2
4206574: RNCC: 3 | RNVC: 2

31 Jan 1983

5120-12-331-4107
Torque Wrench

123314107
EMTSK-36/4: RNCC: 3 | RNVC: 2
5120-01610: RNCC: 6 | RNVC: 9

3 May 1993

5120-12-341-6560
Socket Head Screw Key

123416560
10767A-9/64: RNCC: 3 | RNVC: 2
410-964-58: RNCC: 3 | RNVC: 2
05022073001: RNCC: 3 | RNVC: 2
950PKL-9/64: RNCC: 5 | RNVC: 2
43570009: RNCC: 5 | RNVC: 2
43570009: RNCC: 5 | RNVC: 2
022073: RNCC: 5 | RNVC: 9

11 Oct 1996

5120-12-192-1051
Ausziehvorrichtung

121921051
3D16931: RNCC: 3 | RNVC: 2
3D16931: RNCC: 5 | RNVC: 2
3D16931: RNCC: 5 | RNVC: 2

23 Mar 1982

5120-12-132-0159

5120-12-149-6282
Box Wrench

121496282
532684-8007.000: RNCC: 3 | RNVC: 2
532684U7: RNCC: 5 | RNVC: 9
532684-8007.000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-9522
Federspanner

121559522
NM381-04: RNCC: 3 | RNVC: 2
NM381-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-359-1323
Open End Wrench

123591323
J0433557D311-000A1-056: RNCC: 3 | RNVC: 2

19 Dec 2002

5120-12-129-3329
Socket Wrench Socket

121293329
NO PRIMARY REF 12-129-3329: RNCC: 3 | RNVC: 2
BSF19-517: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-370-3990
Gl Montierwerkzeug

123703990
339: RNCC: 3 | RNVC: 2
7 570 13 12 00: RNCC: 5 | RNVC: 2

2 Nov 2006

5120-12-195-2184
Ausdrueckwerkzeug

121952184
E-05.012.25.01.0: RNCC: 3 | RNVC: 2

26 Jan 1983

5120-12-390-2395
Quick Adjusting Screw Clamp

123902395
TGJ2.506: RNCC: 3 | RNVC: 2

19 Oct 2012

5120-12-355-9092
Aufstec Schluessel

5120-12-350-9191
Hydraulic Jack Handle

123509191
00420-003-000: RNCC: 3 | RNVC: 2
420-03: RNCC: 5 | RNVC: 9

5 Jun 2000

5120-12-369-6856
Bearing And Bushing Inserter And Remover

123696856
B776031001: RNCC: 3 | RNVC: 9
81437220063: RNCC: 5 | RNVC: 2
81.43722-0063: RNCC: 5 | RNVC: 2

9 Aug 2006

5120-12-321-4415
C Clamp

123214415
TK1/135: RNCC: 3 | RNVC: 2
190033000: RNCC: 5 | RNVC: 2

17 May 1990

5120-12-377-0462
Torque Wrench Adapter

123770462
725QR/4: RNCC: 3 | RNVC: 2
58253004: RNCC: 5 | RNVC: 2

9 Dec 2008

5120-12-388-1987
Socket Wrench

123881987
122W970015.000.0: RNCC: 2 | RNVC: 2
122W970015.000.0: RNCC: 3 | RNVC: 2

1 Mar 2012

5120-12-391-0033
Socket Wrench Socket

123910033
5176153: RNCC: 3 | RNVC: 2

14 Jan 2013

5120-12-318-3422
Box Wrench

123183422
DIN3111-55: RNCC: 2 | RNVC: 2

5 Jul 1989

5120-12-150-0969
Offset Screwdriver

121500969
NM258-01: RNCC: 3 | RNVC: 2
586-2988: RNCC: 5 | RNVC: 2
586-2988: RNCC: 5 | RNVC: 2
NM258-01: RNCC: 5 | RNVC: 9
586-2988: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-024-3427

5120-12-375-8764
Mechanical Puller

123758764
12.7382-00-51-02.00-00: RNCC: 3 | RNVC: 2
H23089: RNCC: 5 | RNVC: 2

16 Jul 2008

5120-12-121-5386
Tap And Reamer Wrench

121215386
83141: RNCC: 3 | RNVC: 2
514D003M1-4: RNCC: 3 | RNVC: 2
182-0: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-185-4263
Flat Tip Screwdriver

121854263
107/5: RNCC: 3 | RNVC: 2
08.06508.0005: RNCC: 3 | RNVC: 2
52730050: RNCC: 3 | RNVC: 9
405 21 05: RNCC: 3 | RNVC: 9
3660 NR 5: RNCC: 5 | RNVC: 9
A1DIN5270: RNCC: 5 | RNVC: 9

4 Oct 1980

5120-12-345-4367
Zy Montierwerkzeug

123454367
0009419213: RNCC: 3 | RNVC: 2

16 Mar 1998

5120-12-316-8238
Rohrbieger Dorn

123168238
5-100-049-000-31428: RNCC: 3 | RNVC: 2

16 Feb 1989

5120-12-190-6643
Hand Hydraulic Jack

121906643
105-82768: RNCC: 3 | RNVC: 2
28601.0: RNCC: 5 | RNVC: 9
HUS3,5-180: RNCC: 5 | RNVC: 9

7 Dec 1981

5120-12-133-4801
Box Wrench

121334801
113-10X11: RNCC: 3 | RNVC: 2
113MM10X11MB: RNCC: 5 | RNVC: 2
5M8936-220-96: RNCC: 5 | RNVC: 2
100297: RNCC: 5 | RNVC: 9
4SM10X11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-172-3937
Box Wrench

121723937
30-79350-5160: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-12-331-5900
Inspection Mirror

123315900
18.656: RNCC: 3 | RNVC: 9

25 May 1993

5120-12-301-1244
Bedienteil Hebel

123011244
1423-200.54(3): RNCC: 3 | RNVC: 2

22 Sep 1984

5120-12-369-0108
Torque Wrench

123690108
91381052-TCS: RNCC: 3 | RNVC: 2

12 May 2006

5120-12-123-5469
Spanner Wrench

121235469
DIN1810-A135-145: RNCC: 2 | RNVC: 2
047075: RNCC: 3 | RNVC: 2
260-135-145: RNCC: 3 | RNVC: 2
40-135-145: RNCC: 3 | RNVC: 2
A135-145DIN1810: RNCC: 5 | RNVC: 2
47A135-145: RNCC: 5 | RNVC: 2
DIN1810-A135-145: RNCC: 5 | RNVC: 2
47-1-135-145: RNCC: 5 | RNVC: 9
DIN1810A135-145: RNCC: 5 | RNVC: 9
232165: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-382-0972
Flat Tip And Cross Tip Screwdriver Set

123820972
21250: RNCC: 3 | RNVC: 2
530HK6: RNCC: 5 | RNVC: 2

7 May 2010

5120-12-176-7301
Auflage

121767301
VG95211-ML-121767301: RNCC: 2 | RNVC: 2
105-41110W2.01: RNCC: 3 | RNVC: 2
105-41110W2-01: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-197-3749
Electrical Contact Remover

121973749
66 83 238 206.01: RNCC: 3 | RNVC: 2
6683238206-01: RNCC: 5 | RNVC: 2

17 Oct 1983

5120-12-387-1290
Electrical Contact Remover

123871290
1230-08601: RNCC: 3 | RNVC: 2
80.99606-6134: RNCC: 5 | RNVC: 2
80996066134: RNCC: 5 | RNVC: 2

8 Nov 2011

5120-12-190-7437
Screw Thread Insert Inserter

121907437
23530110000: RNCC: 3 | RNVC: 2
10530110000: RNCC: 5 | RNVC: 2
1053 0110 000: RNCC: 5 | RNVC: 9
S10K: RNCC: 5 | RNVC: 9

10 Dec 1981

5120-12-044-4908

5120-12-336-5875
Montierdorn

123365875
0852 1545: RNCC: 3 | RNVC: 2
8521545: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-315-9047
Valve Tappet Adjusting Tool

123159047
5505890009/00: RNCC: 3 | RNVC: 2
550589000900: RNCC: 5 | RNVC: 2
550589000900: RNCC: 5 | RNVC: 2
550589000900: RNCC: 5 | RNVC: 9

7 Dec 1988

5120-12-094-1280

5120-12-355-9026
Lamp Extractor

123559026
63989001: RNCC: 3 | RNVC: 2
LZ5: RNCC: 5 | RNVC: 2

3 Jan 2002

5120-12-332-8768
Dreh Haltewerkzeug

123328768
0852 4755.006: RNCC: 3 | RNVC: 2

29 Sep 1993

5120-12-390-4159
Seal Inserter

123904159
F30378561: RNCC: 3 | RNVC: 2

9 Nov 2012

5120-12-380-5301
Spanner Wrench

123805301
1878256885: RNCC: 3 | RNVC: 2

5 Nov 2009

5120-12-198-7522
Lager- Und Einsatz

121987522
5870058020: RNCC: 3 | RNVC: 2
026054: RNCC: 5 | RNVC: 2
5870058020: RNCC: 5 | RNVC: 9

23 Feb 1984

5120-12-386-3150
Saddle Marker Tool

123863150
50.000.077: RNCC: 3 | RNVC: 2

23 Aug 2011

5120-12-318-5627
Mechanical Puller Attachment

123185627
4581NA: RNCC: 3 | RNVC: 2
130120: RNCC: 5 | RNVC: 2

26 Jul 1989

5120-12-305-4794
Mechanical Puller

123054794
314589013300: RNCC: 3 | RNVC: 2

12 Nov 1985

5120-12-324-4468
Blindn Nietzugkopf

123244468
349304: RNCC: 3 | RNVC: 2

18 Feb 1991

5120-12-376-5337
Socket Head Screw Key

123765337
43708: RNCC: 3 | RNVC: 2

14 Oct 2008

5120-12-349-4023
Montierhuelse

123494023
0986612059: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-367-9413
Sealant Dispenser

123679413
P2000-003: RNCC: 3 | RNVC: 2

9 Nov 2005

5120-12-123-4986
Body And Fender Repair Punch

121234986
031A353: RNCC: 3 | RNVC: 2
3029: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-376-2671
Socket Wrench Socket

123762671
1X56 137 019: RNCC: 3 | RNVC: 2

3 Sep 2008

5120-12-364-9792
Socket Wrench Set

123649792
T4655: RNCC: 3 | RNVC: 2

19 Nov 2004

5120-12-153-8490
Einste Verdrehhebel

121538490
CH1773-106: RNCC: 3 | RNVC: 2
5605890316/00: RNCC: 5 | RNVC: 2
560589031600: RNCC: 5 | RNVC: 2
CH1773-106: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-372-4697
Pliers

123724697
3770D-120: RNCC: 3 | RNVC: 2

19 Jul 2007

5120-12-167-4683
Hand Hydraulic Jack

121674683
TL5120-0090-50: RNCC: 2 | RNVC: 2
203.416.6: RNCC: 3 | RNVC: 2
305342.3: RNCC: 5 | RNVC: 2
AD3,5-176: RNCC: 5 | RNVC: 2
0005837615: RNCC: 5 | RNVC: 2
HUD3-5-170: RNCC: 5 | RNVC: 2
24045-1: RNCC: 5 | RNVC: 2
27729.0: RNCC: 5 | RNVC: 9
5120-00071: RNCC: 5 | RNVC: 9
TL5120-00071: RNCC: 5 | RNVC: 9

21 Dec 1976

5120-12-153-5156
Hydraulis Abzieher

121535156
2360-264420.00.0: RNCC: 2 | RNVC: 2
2360-264420.00.0: RNCC: 3 | RNVC: 2
2360-264420-00-0: RNCC: 5 | RNVC: 2
2360-264420-00-0: RNCC: 5 | RNVC: 2
2360-264420.00.0: RNCC: 5 | RNVC: 2
2360-264420.00.0: RNCC: 5 | RNVC: 9
2360-264420-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-142-0264
Mechanisch Traverse

121420264
551: RNCC: 3 | RNVC: 2
TS5120-0657-551: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-170-8574
Schluessel

121708574
NO PRIMARY REF 12-170-8574: RNCC: 3 | RNVC: 2
303202: RNCC: 5 | RNVC: 2
303202: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-369-3041
Ratchet Wrench

123693041
29594: RNCC: 3 | RNVC: 2

19 Jun 2006

5120-12-123-5118
Open End Wrench

121235118
6-9X10: RNCC: 3 | RNVC: 2
100 9X10: RNCC: 3 | RNVC: 2
1400357: RNCC: 5 | RNVC: 2
844873: RNCC: 5 | RNVC: 9
01860: RNCC: 5 | RNVC: 9
450-9X10: RNCC: 5 | RNVC: 9
450V9X10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-382-2001
Retaining Ring Pliers

123822001
EH 2180: RNCC: 3 | RNVC: 2
01.57.82.68: RNCC: 5 | RNVC: 2

20 May 2010

5120-12-090-1660

5120-12-157-2037
Abzieher

121572037
2166700: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-393-7406
Socket Wrench

123937406
SV2007: RNCC: 3 | RNVC: 2

8 Oct 2013

5120-12-170-2611

5120-12-131-3615
Pliers

121313615
NO PRIMARY REF 12-131-3615: RNCC: 3 | RNVC: 2
TGL 48-72336,200,OB 019: RNCC: 5 | RNVC: 9
200DIN5251: RNCC: 5 | RNVC: 9
200DIN5251GERAUHT: RNCC: 5 | RNVC: 9
DIN5251-200GERAUHT: RNCC: 5 | RNVC: 9
94-200: RNCC: 5 | RNVC: 9
1393226113707019: RNCC: 5 | RNVC: 9
0808393469459: RNCC: 5 | RNVC: 9

30 May 1969

Load More Results