What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 19 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 19 of 62

5120-12-314-1736
Bearing And Bushing Inserter

123141736
0852 8773: RNCC: 3 | RNVC: 2
8528773: RNCC: 5 | RNVC: 2

15 Jun 1988

5120-12-131-4933
Socket Wrench

121314933
CH2278-13: RNCC: 3 | RNVC: 2
027M07100: RNCC: 5 | RNVC: 2
VM61-020: RNCC: 5 | RNVC: 2
VM61020: RNCC: 5 | RNVC: 2
CH2278-13: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-4087
Spanner Wrench

121744087
7882097: RNCC: 3 | RNVC: 2
1000025-858000: RNCC: 5 | RNVC: 2
7882-097: RNCC: 5 | RNVC: 2

29 Jun 1978

5120-12-182-4194
Montierwerk Huelse

121824194
VW416B: RNCC: 3 | RNVC: 9

30 Jan 1980

5120-12-369-9203
Socket Head Screw Key Set

123699203
238-274-51: RNCC: 3 | RNVC: 2
00.40.85.11: RNCC: 5 | RNVC: 2

28 Aug 2006

5120-12-010-9641

5120-12-126-2638
Machinist's Scriber

121262638
35405: RNCC: 3 | RNVC: 2
545B040: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-366-8563
Machinist's Vise

123668563
SM10: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-12-172-6380
Montagewerkzeug

121726380
1X56099067: RNCC: 3 | RNVC: 2
V99067: RNCC: 5 | RNVC: 2

31 Jan 1978

5120-12-021-2682

5120-12-335-3146
Schluesseleinsatz

123353146
0852 1513: RNCC: 3 | RNVC: 2
8521513: RNCC: 5 | RNVC: 2

9 Aug 1994

5120-12-020-5472

5120-12-093-7216

5120-12-168-5316
Electronic Equipment Alignment Tool

121685316
98-03: RNCC: 3 | RNVC: 2

18 Mar 1977

5120-12-378-6565
Torque Wrench

123786565
6295-1CT: RNCC: 3 | RNVC: 2
4000896026203: RNCC: 5 | RNVC: 2

29 Apr 2009

5120-12-356-2863
Montierdorn

123562863
80996170029: RNCC: 3 | RNVC: 2
80.99617-0029: RNCC: 5 | RNVC: 2

8 Feb 2002

5120-12-369-4756
Flat Tip Screwdriver

123694756
BE-8240: RNCC: 3 | RNVC: 2
01.75.59.02: RNCC: 5 | RNVC: 2
0047765: RNCC: 5 | RNVC: 2

7 Jul 2006

5120-12-010-9672

5120-12-197-2660
Spanner Wrench

121972660
4983030: RNCC: 3 | RNVC: 2
MAGERD 0454: RNCC: 5 | RNVC: 9

5 Oct 1983

5120-12-150-5714
Schluesseleinsatz

121505714
838589000800: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-127-2139

5120-12-163-6090
Mechanical Puller

121636090
105-31702W4: RNCC: 3 | RNVC: 2
4351: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-335-4102
Socket Wrench Socket

123354102
0852 5025: RNCC: 3 | RNVC: 2
8525025: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-310-5131
Schluessel

123105131
4985034: RNCC: 3 | RNVC: 2
MAGERD 0414: RNCC: 5 | RNVC: 9

27 May 1987

5120-12-010-8775

5120-12-351-3874
Pliers

123513874
VG95211-ML-123513874: RNCC: 2 | RNVC: 2
ZTP-SS2: RNCC: 3 | RNVC: 2

20 Jul 2000

5120-12-137-6802
Torque Wrench

121376802
NO PRIMARY REF 12-137-6802: RNCC: 3 | RNVC: 2
0005892221: RNCC: 5 | RNVC: 2
50410012: RNCC: 5 | RNVC: 9
72A12: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-1604
Box Wrench

121561604
NM286-12: RNCC: 3 | RNVC: 2
NM286-12: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-5157
Mechanical Puller

121535157
2360-264030.00.0: RNCC: 2 | RNVC: 2
2360-264030.00.0: RNCC: 3 | RNVC: 2
2360-264030-00-0: RNCC: 5 | RNVC: 2
2360-264030.00.0: RNCC: 5 | RNVC: 9
2360-264030.00.0: RNCC: 5 | RNVC: 9
2360-264030-00-0: RNCC: 5 | RNVC: 9
2360-264030-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-311-2617
Spaten Aufnahme

123112617
2300005-4153.01: RNCC: 2 | RNVC: 2
2300005-4153-01: RNCC: 3 | RNVC: 2
2300005-4153-01: RNCC: 5 | RNVC: 2
2300005-4153-01: RNCC: 5 | RNVC: 9

11 Aug 1987

5120-12-010-9620

5120-12-365-6617
Box Wrench

123656617
CBD30085G01: RNCC: 3 | RNVC: 2

24 Jan 2005

5120-12-166-2283
Justier- Schluessel

121662283
264-269: RNCC: 3 | RNVC: 2

13 Aug 1976

5120-12-183-5476
Spanner Wrench

121835476
1000042-195100: RNCC: 3 | RNVC: 2
MAGERD 7621: RNCC: 5 | RNVC: 9

26 Apr 1980

5120-12-190-7744
Bearing And Bushing Inserter

121907744
140300: RNCC: 3 | RNVC: 2

14 Dec 1981

5120-12-166-2576
Socket Wrench

121662576
05889: RNCC: 3 | RNVC: 2
05889: RNCC: 5 | RNVC: 9

19 Aug 1976

5120-12-368-1976
Socket Wrench Socket

123681976
02410038-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-377-8911
Socket Wrench

123778911
2215810001: RNCC: 3 | RNVC: 2
A2215810001: RNCC: 5 | RNVC: 2

19 Feb 2009

5120-12-369-9488
Pliers

123699488
3772-1D-120: RNCC: 3 | RNVC: 2

30 Aug 2006

5120-12-364-6763
Drive Pin Punch

123646763
70090001-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-324-9228
Mitnehmersch Stift

123249228
15 501: RNCC: 3 | RNVC: 2

10 Apr 1991

5120-12-123-5494
Socket Wrench

121235494
1945NBM15: RNCC: 3 | RNVC: 2
105342: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-351-3885
Craftsman's Tweezers

123513885
1511120: RNCC: 3 | RNVC: 2
00.15.28.73: RNCC: 5 | RNVC: 2

20 Jul 2000

5120-12-170-8664
Dorn

121708664
342089: RNCC: 3 | RNVC: 2
342089: RNCC: 5 | RNVC: 2
342089: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-392-6777
Mechanical Puller

123926777
CTP40915G001: RNCC: 3 | RNVC: 2

27 Jun 2013

5120-12-191-3915
Spanner Wrench

121913915
148E168: RNCC: 3 | RNVC: 2

1 Feb 1982

5120-12-319-4699
Lager- Und Einsatz

123194699
99366657: RNCC: 3 | RNVC: 2

4 Oct 1989

5120-12-385-6720
Mechanical Puller Attachment

123856720
055.157: RNCC: 3 | RNVC: 2
11490090381: RNCC: 5 | RNVC: 2

29 Jun 2011

5120-12-171-1582
Ausbauwerkzeug

121711582
VG95211-ML-121711582: RNCC: 2 | RNVC: 2
105-15103W5: RNCC: 3 | RNVC: 2

12 Sep 1977

5120-12-379-2802
Torque Wrench Adapter

123792802
1963724: RNCC: 3 | RNVC: 2
1963724: RNCC: 5 | RNVC: 2
4002805929278: RNCC: 5 | RNVC: 2
7118-41: RNCC: 5 | RNVC: 2
4002805929278: RNCC: 5 | RNVC: 2
7118-41: RNCC: 5 | RNVC: 2

9 Jul 2009

5120-12-362-4108
Flat Tip Screwdriver

123624108
T49025 2575: RNCC: 3 | RNVC: 2
66450: RNCC: 3 | RNVC: 2
01.75.03.43: RNCC: 5 | RNVC: 2
DIN5265-C-B0,4X2,5X75: RNCC: 5 | RNVC: 9

18 Feb 2004

5120-12-369-3410
Crimping Tool Die

123693410
974950: RNCC: 3 | RNVC: 2

22 Jun 2006

5120-12-364-5663
Socket Wrench Crowfoot Attachment

123645663
02200019-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-194-7959
Spanner Wrench

121947959
F6271438: RNCC: 3 | RNVC: 2
F600000271438: RNCC: 5 | RNVC: 9

8 Dec 1982

5120-12-384-8953
Hand-Operated Grommet And Eyelet Press

123848953
50.000.044: RNCC: 3 | RNVC: 2

7 Apr 2011

5120-12-026-1714

5120-12-367-6018
Hand Beading Tool

123676018
5390017: RNCC: 3 | RNVC: 2

8 Sep 2005

5120-12-369-5627
Torque Wrench

123695627
4550-75: RNCC: 3 | RNVC: 2
4550-75: RNCC: 3 | RNVC: 2
1521365: RNCC: 5 | RNVC: 2

25 Jul 2006

5120-12-135-5956

5120-12-092-2268

5120-12-191-5577
Open End Wrench

121915577
9291386130: RNCC: 3 | RNVC: 2
0110606060000: RNCC: 5 | RNVC: 2

10 Feb 1982

5120-12-387-1239
Electrical Contact Remover

123871239
1830-22103: RNCC: 3 | RNVC: 2
80.99606-6140: RNCC: 5 | RNVC: 2
80996066140: RNCC: 5 | RNVC: 2

8 Nov 2011

5120-12-133-2462
Rack Bar Jack

121332462
03.9312-0100.4/01: RNCC: 3 | RNVC: 2
000589183100: RNCC: 3 | RNVC: 2
03.9312-0100.4/31: RNCC: 5 | RNVC: 2
3931201004: RNCC: 5 | RNVC: 2
3-9312-0100-4: RNCC: 5 | RNVC: 2
3.9312-0100.4: RNCC: 5 | RNVC: 2
03.9312-01004/01: RNCC: 5 | RNVC: 9
000589183100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-385-5579
Hand Tube Flaring Tool

123855579
F30376963: RNCC: 3 | RNVC: 2

15 Jun 2011

5120-12-170-6727
Spanner Wrench

121706727
4239269: RNCC: 3 | RNVC: 2

27 Jul 1977

5120-12-150-6109
Seit Montageplatte

121506109
1X46104918: RNCC: 3 | RNVC: 2
V104918: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-374-3627
Socket Wrench Socket

123743627
01140010-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-318-0778
Flat Tip Screwdriver

123180778
04160: RNCC: 3 | RNVC: 9

8 Jun 1989

5120-12-327-1565
Aligning Punch

123271565
01TC33517: RNCC: 3 | RNVC: 2

9 Dec 1991

5120-12-315-4362
Seal Inserter

123154362
4987052: RNCC: 3 | RNVC: 2

21 Oct 1988

5120-12-195-1558
Face Spanner Wrench Socket

121951558
80.99603.0087: RNCC: 3 | RNVC: 2

18 Jan 1983

5120-12-313-0851
Torque Wrench Adapter

123130851
P-896438-409: RNCC: 3 | RNVC: 2
P896438-409: RNCC: 5 | RNVC: 2

3 Mar 1988

5120-12-190-7328
Auswechselwerkzeug

121907328
6008R-0800.00.0: RNCC: 2 | RNVC: 2
6008R-0800.00.0: RNCC: 3 | RNVC: 2
5120121907328: RNCC: 5 | RNVC: 2
6008R-0800.00.0: RNCC: 5 | RNVC: 2
6008R-0800.00.0: RNCC: 5 | RNVC: 9

10 Dec 1981

5120-12-185-7865
Electrical Contact Inserter

121857865
C 334-A27-C99: RNCC: 3 | RNVC: 2
C334-A27-C99: RNCC: 3 | RNVC: 2
C334A27C99: RNCC: 3 | RNVC: 2
C 5734 891: RNCC: 5 | RNVC: 2
C 5734 891: RNCC: 5 | RNVC: 2

30 Oct 1980

5120-12-328-6985
Dreh Winkelscheibe

123286985
F30273549: RNCC: 3 | RNVC: 2

16 Jun 1992

5120-12-139-3016
Abziehvorrichtung

121393016
8205890033: RNCC: 3 | RNVC: 2
006M00700: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-129-8795
Spanner Wrench

121298795
1687950044: RNCC: 3 | RNVC: 2
EF3141A: RNCC: 5 | RNVC: 2
KDAL5499: RNCC: 5 | RNVC: 9
1687950044: RNCC: 5 | RNVC: 9
EF3141A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-5800
Socket Head Screw Key Set

123885800
24189: RNCC: 3 | RNVC: 2
369SZ13B: RNCC: 5 | RNVC: 2

3 Apr 2012

5120-12-184-6004
Spanner Wrench

121846004
110300: RNCC: 3 | RNVC: 2

5 Aug 1980

5120-12-319-4357
Lager- Und Einsatz

123194357
99374348: RNCC: 3 | RNVC: 2

2 Oct 1989

5120-12-196-4078
Open End Wrench

121964078
NO PRIMARY REF 12-196-4078: RNCC: 3 | RNVC: 2
445082: RNCC: 5 | RNVC: 9
445082: RNCC: 5 | RNVC: 9

4 Jul 1983

5120-12-357-8944
Ratchet Wrench

123578944
714 251 14: RNCC: 3 | RNVC: 2

8 Aug 2002

5120-12-021-2659

5120-12-137-1366
Open End Wrench

121371366
D03385: RNCC: 3 | RNVC: 2
D3385: RNCC: 5 | RNVC: 2
D03385: RNCC: 5 | RNVC: 9
D3385: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-349-0048
Socket Head Screw Key Set

123490048
1997MF/6T: RNCC: 3 | RNVC: 2

13 Sep 1999

5120-12-389-5140
Torque Wrench Adapter

123895140
R809292: RNCC: 3 | RNVC: 2

17 Jul 2012

5120-12-375-8621
Pipe Wrench

123758621
85 01 250: RNCC: 3 | RNVC: 2
8501250: RNCC: 5 | RNVC: 9

14 Jul 2008

5120-12-324-3696
Mechanical Puller

123243696
460589023300: RNCC: 3 | RNVC: 2

8 Feb 1991

5120-12-190-7847
Bearing And Bushing Inserter

121907847
80.99616.0058: RNCC: 3 | RNVC: 2
80996160058: RNCC: 3 | RNVC: 2

15 Dec 1981

5120-12-364-3457
Socket Head Screw Key

123643457
43550014-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-361-1204
Box Wrench

123611204
CBD32569P02: RNCC: 3 | RNVC: 2

26 Aug 2003

5120-12-324-9231
Mitnehmersch Stift

123249231
15 504: RNCC: 3 | RNVC: 2

10 Apr 1991

5120-12-354-1939
Socket Wrench

123541939
189101701: RNCC: 3 | RNVC: 2

19 Jun 2001

5120-12-144-6091
Face Spanner Wrench Socket

121446091
838589000700: RNCC: 3 | RNVC: 2
8385890007: RNCC: 5 | RNVC: 2
8385890007000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-373-1090
Socket Wrench

123731090
137430: RNCC: 3 | RNVC: 2
01.89.69.54: RNCC: 5 | RNVC: 2

27 Sep 2007

5120-12-381-9021
Pipe Wrench

123819021
0530460S: RNCC: 3 | RNVC: 2

15 Apr 2010

5120-12-161-7501

5120-12-368-1029
Offset Screwdriver

123681029
73272003-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-185-2542
Drive Pin Punch

121852542
264-120X10X8,0: RNCC: 3 | RNVC: 2
B8DIN6458: RNCC: 5 | RNVC: 9
DIN6458-B8: RNCC: 5 | RNVC: 9

25 Sep 1980

5120-12-192-8058
Bearing And Bushing Inserter

121928058
352 589 06 15 00: RNCC: 3 | RNVC: 2
352589061500: RNCC: 3 | RNVC: 2

26 May 1982

5120-12-390-4215
Seal Inserter

123904215
F30372568: RNCC: 3 | RNVC: 2

12 Nov 2012

5120-12-010-9676

5120-12-127-5310
Hand Terminal Crimping Tool

121275310
47386: RNCC: 3 | RNVC: 2
47386: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-383-1063
Mechanical Puller

123831063
F30376363: RNCC: 3 | RNVC: 2

14 Sep 2010

5120-12-365-9737
Box Wrench

123659737
41071213-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-328-6972
Dreh Haltewerkzeug

123286972
F6375360: RNCC: 3 | RNVC: 2

16 Jun 1992

5120-12-120-5706
Gasoline Blowtorch

121205706
NO PRIMARY REF 12-120-5706: RNCC: 3 | RNVC: 2
DIN8502-UA0,5-18RMS: RNCC: 5 | RNVC: 9
UA0-5-18RDIN8502MS: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-329-9669
Mechanical Puller Attachment

123299669
0851 8573.003: RNCC: 3 | RNVC: 2
8518573.003: RNCC: 5 | RNVC: 2

16 Oct 1992

5120-12-321-1264
Mater Saug- Griff

123211264
121: RNCC: 3 | RNVC: 2
54.1035.650.03LV: RNCC: 3 | RNVC: 2

30 Mar 1990

5120-12-353-8747
Screwdriver Bit

123538747
0015896009/00: RNCC: 3 | RNVC: 2
001589600900: RNCC: 5 | RNVC: 2

16 May 2001

5120-12-355-3951
Abzieh- Und Aufdrue

123553951
5555205: RNCC: 3 | RNVC: 2

9 Nov 2001

5120-12-024-3315

5120-12-167-9681
Spanner Wrench

121679681
335914-9005.000: RNCC: 3 | RNVC: 2
1255-20000W1: RNCC: 5 | RNVC: 2
1255-20000W1: RNCC: 5 | RNVC: 2
335914-9005.000: RNCC: 5 | RNVC: 9
335914-9005.000: RNCC: 8 | RNVC: 2

7 Feb 1977

5120-12-338-5272
Aufweit Spannbacke

123385272
608381: RNCC: 3 | RNVC: 2

24 Jul 1995

5120-12-301-9071
Lager- Und Einsatz

123019071
01TC34585: RNCC: 3 | RNVC: 2

16 Nov 1984

5120-12-139-2485
Ausbauvorrichtung

121392485
003M03400: RNCC: 3 | RNVC: 2
VM70472: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-333-5672
Seal Inserter

123335672
1841301: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-354-0314
Seal Inserter

123540314
714589031500: RNCC: 3 | RNVC: 2
714 589 03 15 00: RNCC: 5 | RNVC: 2

29 May 2001

5120-12-342-8421
We Montierwerkzeug

123428421
18 910 7623: RNCC: 3 | RNVC: 2
18 911 4003: RNCC: 5 | RNVC: 9

9 Apr 1997

5120-12-310-2791
Aligning Punch

123102791
33765.0M0: RNCC: 3 | RNVC: 2

4 May 1987

5120-12-363-8859
Bearing And Bushing Inserter

123638859
T670P5001224: RNCC: 3 | RNVC: 2

3 Aug 2004

5120-12-366-9168
Lamp Cap Extractor

123669168
4920-23166: RNCC: 3 | RNVC: 2
4920-23166: RNCC: 6 | RNVC: 9

21 Jun 2005

5120-12-374-3196
Magnetic Retrieving Tool

123743196
BM 50.702: RNCC: 3 | RNVC: 2

7 Feb 2008

5120-12-091-4760

5120-12-359-6713
Ausdrueck Gehaeuse

123596713
T623P5003101: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-041-2694

5120-12-126-1707

5120-12-133-4362
Abziehvorrichtung

121334362
3L17046: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-313-9259
Hand Screw Starter

123139259
390-0,6-5,5-225: RNCC: 3 | RNVC: 2

20 May 1988

5120-12-371-5172
Mechanical Puller

123715172
71007554: RNCC: 3 | RNVC: 2

11 Apr 2007

5120-12-186-7294
Mechanical Puller

121867294
99346228: RNCC: 3 | RNVC: 2
430800: RNCC: 5 | RNVC: 9
430800: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-090-1733

5120-12-092-2890

5120-12-325-0813
Spanner Wrench

123250813
52820-W15: RNCC: 3 | RNVC: 2

30 Apr 1991

5120-12-041-5742

5120-12-377-6478
Telescoping Pole

123776478
54.1100.173.01: RNCC: 3 | RNVC: 2

30 Jan 2009

5120-12-092-2273

5120-12-325-0192
Socket Wrench Handle

123250192
DIN7436-12,5: RNCC: 2 | RNVC: 2
125302: RNCC: 3 | RNVC: 2
9840: RNCC: 3 | RNVC: 2
170194: RNCC: 5 | RNVC: 9
8154VDE: RNCC: 5 | RNVC: 9

22 Apr 1991

5120-12-192-3586
Hebevorrichtung

121923586
41-1180-0900.000.0: RNCC: 2 | RNVC: 2
41-1180-0900.000.0: RNCC: 3 | RNVC: 2
41-1180-0900.000.0: RNCC: 5 | RNVC: 2

19 Apr 1982

5120-12-313-4260
Mechanical Puller Step Plate

123134260
80996080012: RNCC: 3 | RNVC: 2
80.99608.0012: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-380-2882
Screwdriver Handle

123802882
31498: RNCC: 3 | RNVC: 2
2691ESD: RNCC: 5 | RNVC: 2

15 Oct 2009

5120-12-190-8619
Lager- Und Einsatz

121908619
NO PRIMARY REF 12-190-8619: RNCC: 3 | RNVC: 2
416270: RNCC: 5 | RNVC: 9

17 Dec 1981

5120-12-364-5671
Open End Wrench

123645671
40031213-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-320-6952
Spanner Wrench

123206952
03962W1: RNCC: 3 | RNVC: 2

8 Feb 1990

5120-12-161-6598
Spanner Wrench

121616598
1712180112: RNCC: 3 | RNVC: 2
17121 80112: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-6191
Seal Inserter

121766191
23290-268160: RNCC: 2 | RNVC: 2

11 Dec 1978

5120-12-378-0055
Ratchet Wrench

123780055
41131011-TCS: RNCC: 3 | RNVC: 2

4 Mar 2009

5120-12-377-3569
Flat Tip Screwdriver Set

123773569
117700: RNCC: 3 | RNVC: 2

12 Jan 2009

5120-12-327-8468
Socket Head Screw Key Set

123278468
1997Z-21T: RNCC: 3 | RNVC: 2
130243: RNCC: 5 | RNVC: 2

12 Mar 1992

5120-12-328-6964
Bearing And Bushing Inserter

123286964
F6370980: RNCC: 3 | RNVC: 2
F600002370980: RNCC: 5 | RNVC: 2

16 Jun 1992

5120-12-149-7909
Anziehvorrichtung

121497909
838589185900: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-325-7505

5120-12-333-6780
Crimping Tool Die

123336780
401N: RNCC: 3 | RNVC: 2

21 Jan 1994

5120-12-021-2561

5120-12-190-3667
Open End Box Wrench

121903667
MKV1150/4501.01.02.07-SW24: RNCC: 3 | RNVC: 2

24 Nov 1981

5120-12-192-1299
Ausziehvorrichtung

121921299
3D16933: RNCC: 3 | RNVC: 2
3D16933: RNCC: 5 | RNVC: 2
3D16933: RNCC: 5 | RNVC: 2

24 Mar 1982

5120-12-023-0178

5120-12-367-7313
Mechanical Puller

123677313
124589033300: RNCC: 3 | RNVC: 2

4 Oct 2005

5120-12-322-4066
Box Wrench

123224066
C25-M10X11: RNCC: 3 | RNVC: 2
148032: RNCC: 5 | RNVC: 2

20 Aug 1990

5120-12-176-6871
Montagewerkzeug

121766871
435589003500: RNCC: 3 | RNVC: 2

13 Dec 1978

5120-12-361-5769
Electrical Contact Remover

123615769
80996060599: RNCC: 3 | RNVC: 2

20 Oct 2003

5120-12-145-9634
Schluessel

121459634
23114-7153-00: RNCC: 2 | RNVC: 2
510160: RNCC: 3 | RNVC: 2
510160: RNCC: 5 | RNVC: 9
23114-7153-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-6255
Montagewerkzeug

121776255
UMG047-71: RNCC: 3 | RNVC: 2
UMG047-71: RNCC: 5 | RNVC: 9

9 Feb 1979

5120-12-123-4993
Hand Rivet Set

121234993
30677: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-363-9704
Bearing And Bushing Inserter

123639704
T671P5002242: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-321-1210
Auf Spann- Buegel

123211210
62253400: RNCC: 3 | RNVC: 2

29 Mar 1990

5120-12-126-4796

5120-12-123-5876
Box Wrench

121235876
113AF3/16X13/64MB: RNCC: 3 | RNVC: 2
113AF3-16X13-64MB: RNCC: 5 | RNVC: 2
100300: RNCC: 5 | RNVC: 9
4SZ3-16X13-64: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1747
Hand Bellows

121261747
1375-70: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-185-0733
Bearing And Bushing Inserter

121850733
VW244A: RNCC: 3 | RNVC: 2

6 Sep 1980

5120-12-132-2728
Montage- Bock

121322728
VW314: RNCC: 3 | RNVC: 2
VW314: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-384-0373
Seal Inserter

123840373
F30379297: RNCC: 3 | RNVC: 2

13 Jan 2011

5120-12-193-6850

5120-12-130-9499
Socket Head Screw Key

121309499
DIN6911-17: RNCC: 2 | RNVC: 2
WA64: RNCC: 3 | RNVC: 2
CS17: RNCC: 3 | RNVC: 2
17DIN6911: RNCC: 5 | RNVC: 2
2094-17: RNCC: 5 | RNVC: 9
57422: RNCC: 5 | RNVC: 9
17DIN6911GALNI8: RNCC: 5 | RNVC: 9
43509: RNCC: 5 | RNVC: 9
134426: RNCC: 5 | RNVC: 9
1997MF17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-353-1169
Torque Wrench Adapter Set

123531169
J0433557D311-000A1: RNCC: 3 | RNVC: 2

30 Jan 2001

5120-12-359-5544
Bearing And Bushing Inserter

123595544
T622P3005101: RNCC: 3 | RNVC: 2

18 Feb 2003

5120-12-363-8421
Bearing And Bushing Inserter

123638421
T671P5001230: RNCC: 3 | RNVC: 2

30 Jul 2004

5120-12-094-0334

5120-12-312-8916
Open End Wrench

123128916
1081429: RNCC: 2 | RNVC: 2
1081429: RNCC: 3 | RNVC: 2

17 Feb 1988

5120-12-165-7079
Abzieher

121657079
306-4910: RNCC: 3 | RNVC: 2

22 Jun 1976

5120-12-170-8571
Einstellvorrichtung

121708571
NO PRIMARY REF 12-170-8571: RNCC: 3 | RNVC: 2
213204: RNCC: 5 | RNVC: 2
213204: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-191-9351
Mechanical Puller Step Plate

121919351
99363247: RNCC: 3 | RNVC: 2
420200: RNCC: 5 | RNVC: 9

16 Mar 1982

5120-12-157-6787
Kabelschuh Stempel

121576787
N95-120-150WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-359-8811
Bearing And Bushing Inserter And Remover

123598811
T623P3003051: RNCC: 3 | RNVC: 2

18 Mar 2003

5120-12-199-8655
Offset Screwdriver

121998655
52 798010: RNCC: 3 | RNVC: 9

8 Jun 1984

5120-12-368-9866
Socket Wrench Screwdriver Attachment

123689866
3243-TX 20: RNCC: 3 | RNVC: 2
00.45.20.58: RNCC: 5 | RNVC: 2

10 May 2006

5120-12-388-0855
Cable Type Ratchet Lever Puller

123880855
7410.01.06: RNCC: 3 | RNVC: 2
HIT6: RNCC: 5 | RNVC: 2

23 Feb 2012

5120-12-161-0085
Montierhebel

121610085
100355-000600: RNCC: 2 | RNVC: 2
100355-000600: RNCC: 3 | RNVC: 2
100355-000600: RNCC: 5 | RNVC: 9
100355-000600: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-700-3672
Hand Hammer

127003672
51-090706094: RNCC: 2 | RNVC: 2

14 Apr 1992

5120-12-156-1628
Screw Extractor

121561628
M457-05: RNCC: 3 | RNVC: 2
M457-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-389-2558
Pneumatic Tire Valve Core Inserter And Remover

123892558
203589031000: RNCC: 3 | RNVC: 2
203589031000: RNCC: 5 | RNVC: 2

13 Jun 2012

5120-12-325-2248
Mechanical Puller

123252248
0852 3039: RNCC: 3 | RNVC: 2
8523039: RNCC: 5 | RNVC: 2

17 May 1991

5120-12-380-6324
Torque Wrench Adapter

123806324
7370/80: RNCC: 3 | RNVC: 2
F30450594: RNCC: 5 | RNVC: 2
58290080: RNCC: 5 | RNVC: 2

16 Nov 2009

5120-12-383-8295
Pipe Wrench

123838295
0530460C: RNCC: 3 | RNVC: 2

10 Dec 2010

5120-12-371-3508
Fixed Open End Wrench Set

123713508
146S 12M: RNCC: 3 | RNVC: 2
00.25.69.47: RNCC: 5 | RNVC: 2

19 Mar 2007

5120-12-139-2540
Ausdrueckvorrichtun

121392540
006M03800: RNCC: 3 | RNVC: 2
VM71642: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-349-3751
Socket Head Screw Key Set

123493751
634999-8005.000: RNCC: 3 | RNVC: 2

5 Nov 1999

5120-12-094-0318

5120-12-311-1054
Verspannvorrichtung

123111054
352589126300: RNCC: 3 | RNVC: 2

27 Jul 1987

5120-12-010-9654

5120-12-320-9366
Craftsman's Tweezers

123209366
71770-AM: RNCC: 3 | RNVC: 2
727580-AM: RNCC: 3 | RNVC: 2
250A-10-1005: RNCC: 5 | RNVC: 2
250A-10-1005: RNCC: 5 | RNVC: 9
71770-AM: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-12-307-4714
Box Wrench

123074714
DIN3521-27: RNCC: 2 | RNVC: 2
SW27DIN3521-GT: RNCC: 5 | RNVC: 9

20 Jun 1986

5120-12-323-2368
Open End Wrench

123232368
947409777: RNCC: 3 | RNVC: 2
3201-750.02.00.0001-000: RNCC: 5 | RNVC: 2

6 Nov 1990

5120-12-336-7034
Bearing And Bushing Remover

123367034
4900399-415720.00: RNCC: 2 | RNVC: 2
4900399-415720.00: RNCC: 3 | RNVC: 2

12 Dec 1994

5120-12-023-0168

5120-12-196-7375
Aligning Punch

121967375
1X56136579: RNCC: 3 | RNVC: 2

9 Aug 1983

5120-12-374-4469
Torque Wrench Adapter

123744469
765589010300: RNCC: 3 | RNVC: 2

18 Feb 2008

5120-12-376-9904
Screw Thread Insert Inserter

123769904
620000662: RNCC: 3 | RNVC: 2
15017309: RNCC: 5 | RNVC: 2

1 Dec 2008

5120-12-316-2170
Spanner Wrench

123162170
411 1551: RNCC: 3 | RNVC: 2

30 Dec 1988

5120-12-135-7101

5120-12-391-0782
Bearing And Bushing Remover

123910782
F6559618: RNCC: 3 | RNVC: 2

23 Jan 2013

5120-12-388-0635
Open End Box Wrench

123880635
00497242680: RNCC: 3 | RNVC: 2

22 Feb 2012

5120-12-366-2136
Inspection Mirror

123662136
77401060-TCS: RNCC: 3 | RNVC: 2

22 Mar 2005

5120-12-126-5506
Rad Einpreszhuelse

121265506
4015890331: RNCC: 3 | RNVC: 2
4015890331: RNCC: 3 | RNVC: 9
401589033100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-020-5471

5120-12-163-6076
Mechanical Puller

121636076
105-14101W2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-330-5362
Mechanical Puller

123305362
0853 0606: RNCC: 3 | RNVC: 2
8530606: RNCC: 5 | RNVC: 2

6 Jan 1993

5120-12-363-9044
Bearing And Bushing Inserter

123639044
T670P5001256: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-141-3019
Swivel Knob Jeweler's Screwdriver Set

121413019
572A001BZ0-6T03: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-700-3755
Slip Joint Pliers

127003755
53-03322103924: RNCC: 2 | RNVC: 2
088.006.026.000: RNCC: 5 | RNVC: 2

15 Apr 1992

5120-12-302-7405
Socket Wrench

123027405
SWN01-0604-16: RNCC: 3 | RNVC: 2

28 Jan 1985

5120-12-361-1944
Boerdelwer Einsatz

123611944
80996060067: RNCC: 3 | RNVC: 2
80.99606-0067: RNCC: 5 | RNVC: 2

2 Sep 2003

5120-12-023-1421

5120-12-124-2712
Richt- Platte

121242712
RM300X300: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-163-5269
Dorn

121635269
66606900: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-379-7172
Stru Mounting Tool

123797172
105-13221W1: RNCC: 3 | RNVC: 2

26 Aug 2009

5120-12-333-8669
Bearing And Bushing Inserter

123338669
327589031500: RNCC: 3 | RNVC: 2

18 Feb 1994

5120-12-322-0959
Socket Wrench Socket

123220959
0852 2420: RNCC: 3 | RNVC: 2
8522420: RNCC: 5 | RNVC: 2

24 Jul 1990

5120-12-366-8630
Socket Wrench Crowfoot Attachment

123668630
440MJ24: RNCC: 3 | RNVC: 2
02210024: RNCC: 5 | RNVC: 2
02210024: RNCC: 5 | RNVC: 2

16 Jun 2005

5120-12-373-4288
Drain Plug Wrench

123734288
B13990: RNCC: 3 | RNVC: 2
B13990: RNCC: 5 | RNVC: 2

31 Oct 2007

5120-12-369-7398
Spanner Wrench

123697398
904589000700: RNCC: 3 | RNVC: 2
7083665: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-387-0115
Offset Screwdriver

123870115
093272: RNCC: 3 | RNVC: 2
ZS200E: RNCC: 5 | RNVC: 2

26 Oct 2011

5120-12-198-3574
Schluessel

121983574
FM7022: RNCC: 3 | RNVC: 2

19 Jan 1984

5120-12-127-9056

5120-12-044-4929

5120-12-147-1306
Ventil Auszieher

121471306
WZ52: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-310-5390
Gear Inserter

123105390
80996140016: RNCC: 3 | RNVC: 2
80.99614.0016: RNCC: 5 | RNVC: 2

29 May 1987

5120-12-323-4101
Woven Cable Grip

123234101
01591: RNCC: 3 | RNVC: 2

23 Nov 1990

5120-12-326-5298
Mechanical Puller Attachment

123265298
4900342: RNCC: 3 | RNVC: 2

1 Oct 1991

5120-12-127-2822
Mechanical Puller

121272822
4639: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-377-1181
Quick Adjusting Screw Clamp

123771181
STB80M: RNCC: 3 | RNVC: 2

11 Dec 2008

5120-12-372-1349
Lu Montierwerkzeug

123721349
S533I30A1101: RNCC: 3 | RNVC: 2

20 Jun 2007

5120-12-374-9617
Socket Wrench

123749617
212270: RNCC: 3 | RNVC: 2

9 Apr 2008

5120-12-388-3916
Socket Wrench

123883916
000-201: RNCC: 3 | RNVC: 2

16 Mar 2012

5120-12-342-8419
Schluessel

123428419
18 910 1101: RNCC: 3 | RNVC: 2

9 Apr 1997

5120-12-348-1949
Ausdrueckwerkzeug

123481949
814: RNCC: 3 | RNVC: 2
46877: RNCC: 5 | RNVC: 2
7083632: RNCC: 5 | RNVC: 2
001589443300: RNCC: 5 | RNVC: 2

4 May 1999

5120-12-343-2102
Torque Wrench Adapter

123432102
5197018: RNCC: 3 | RNVC: 2

20 May 1997

5120-12-369-1750
Machinist's Vise

123691750
WSM12: RNCC: 3 | RNVC: 2
00.21.07.70: RNCC: 5 | RNVC: 2

31 May 2006

5120-12-332-5906
Sp Montierwerkzeug

123325906
0851 8908.010: RNCC: 3 | RNVC: 2

25 Aug 1993

5120-12-093-7707

5120-12-178-9805
Blindni Mundstueck

121789805
349056: RNCC: 3 | RNVC: 2
K49056: RNCC: 5 | RNVC: 2

30 May 1979

5120-12-311-6791
Mechanical Puller

123116791
80996010076: RNCC: 3 | RNVC: 2
20 081: RNCC: 3 | RNVC: 2
20081: RNCC: 5 | RNVC: 2
80.99601.0076: RNCC: 5 | RNVC: 2

6 Oct 1987

5120-12-139-3055

5120-12-135-8947

5120-12-310-6786
Mechanical Puller

123106786
99347068: RNCC: 3 | RNVC: 2
530060: RNCC: 5 | RNVC: 9

19 Jun 1987

5120-12-312-1394
Lager- Und Einsatz

123121394
83091440180: RNCC: 3 | RNVC: 2
83.09144.0180: RNCC: 5 | RNVC: 2

26 Nov 1987

5120-12-700-6686
Hand Hydraulic Jack

127006686
54-60034513620: RNCC: 2 | RNVC: 2

6 Oct 1992

5120-12-313-6565
Ge Montierwerkzeug

123136565
VW548: RNCC: 3 | RNVC: 2

22 Apr 1988

5120-12-333-4433
Spanner Wrench

123334433
409306-00: RNCC: 3 | RNVC: 2

15 Dec 1993

5120-12-126-4916
Saddler's Harness Awl Blade

121264916
264-40MM: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-183-0990
Dorn

121830990
4190429: RNCC: 3 | RNVC: 2

20 Mar 1980

5120-12-319-3637
Bearing And Bushing Inserter

123193637
99374249: RNCC: 3 | RNVC: 2

26 Sep 1989

5120-12-355-3952
Mechanical Puller

123553952
5555206: RNCC: 3 | RNVC: 2

9 Nov 2001

5120-12-385-9978
Cable Type Ratchet Lever Puller

123859978
SZ-832-ST: RNCC: 3 | RNVC: 2

28 Jul 2011

5120-12-388-2800
Telescoping Pole

123882800
5355-0250: RNCC: 3 | RNVC: 2

7 Mar 2012

5120-12-365-3494
Ge Montierwerkzeug

123653494
5583238: RNCC: 3 | RNVC: 2
M55.093.070: RNCC: 5 | RNVC: 2

22 Dec 2004

5120-12-334-3938
Mechanical Puller

123343938
350: RNCC: 3 | RNVC: 2

3 May 1994

5120-12-174-1485
Socket Wrench Extension

121741485
351271109930: RNCC: 3 | RNVC: 2

7 Jun 1978

5120-12-123-5569
Combination Box And Open End Wrench

121235569
0276004002: RNCC: 3 | RNVC: 2
8797950500: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-184-7144
Einbauwerkzeug

121847144
0850 8000: RNCC: 3 | RNVC: 2
8508000: RNCC: 5 | RNVC: 2

14 Aug 1980

5120-12-305-3714

5120-12-311-9366
Spanner Wrench

123119366
KDEP2989: RNCC: 3 | RNVC: 2
KDEP2989: RNCC: 5 | RNVC: 2

30 Oct 1987

5120-12-386-0172
Mechanical Puller

123860172
F6782566: RNCC: 3 | RNVC: 2

1 Aug 2011

5120-12-364-5634
Combination Box And Open End Wrench

123645634
40082323-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-337-2058
Piston Inserter

123372058
11.49021-0276: RNCC: 3 | RNVC: 2
034.071: RNCC: 5 | RNVC: 2
034.071: RNCC: 5 | RNVC: 9
11.49021-0276: RNCC: 5 | RNVC: 9

1 Feb 1995

5120-12-314-0467
Socket Wrench Socket

123140467
5187019: RNCC: 3 | RNVC: 2

1 Jun 1988

5120-12-385-6051
Rotating Members Aligning Tool

123856051
Y4276250: RNCC: 3 | RNVC: 2

21 Jun 2011

5120-12-373-4940
Socket Wrench Crowfoot Attachment

123734940
02211027: RNCC: 3 | RNVC: 2

8 Nov 2007

5120-12-321-7860
Bearing And Bushing Remover

123217860
41812-T600: RNCC: 3 | RNVC: 2

26 Jun 1990

5120-12-390-4104
Mecha Fitting Tool

123904104
F6270932: RNCC: 3 | RNVC: 2

9 Nov 2012

5120-12-368-8079
Combination Box And Open End Wrench

123688079
40101010-TCS: RNCC: 3 | RNVC: 2

24 Apr 2006

5120-12-384-0568
Bearing And Bushing Inserter

123840568
F6783825: RNCC: 3 | RNVC: 2

17 Jan 2011

5120-12-129-3319
Open End Wrench

121293319
156BA2X4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-382-7402
Screwdriver Bit

123827402
05060189001: RNCC: 3 | RNVC: 2
867/4ZTX25X89: RNCC: 5 | RNVC: 2

3 Aug 2010

5120-12-385-5770
Mounting Sleeve

123855770
F6550755: RNCC: 3 | RNVC: 2

17 Jun 2011

5120-12-198-6584
Aufweitwer Einsatz

121986584
234 305: RNCC: 3 | RNVC: 2

17 Feb 1984

5120-12-147-1852
Dorn

121471852
1365890339: RNCC: 3 | RNVC: 2
136589033900: RNCC: 5 | RNVC: 2
136589033900: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-331-8511
Spanner Wrench

123318511
523510-0000 902: RNCC: 3 | RNVC: 2

28 Jun 1993

5120-12-152-7217
Schluesseleinsatz

121527217
PV640: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-002-1270

5120-12-156-1538
Box Wrench

121561538
NM285-03: RNCC: 3 | RNVC: 2
NM285-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-316-3074
Socket Head Screw Key Blade

123163074
99764BP: RNCC: 3 | RNVC: 2
42520800: RNCC: 3 | RNVC: 9
99-764BP: RNCC: 5 | RNVC: 9

9 Jan 1989

5120-12-368-7446
An Montierwerkzeug

123687446
313983: RNCC: 3 | RNVC: 2
0855-03-12-00/37: RNCC: 5 | RNVC: 2

12 Apr 2006

5120-12-312-0015
Face Spanner Wrench Socket

123120015
01TC34552: RNCC: 3 | RNVC: 2

10 Nov 1987

5120-12-332-5817
Ku Montierwerkzeug

123325817
0852 5001: RNCC: 3 | RNVC: 2
8525001: RNCC: 5 | RNVC: 2

24 Aug 1993

5120-12-127-2823
Mechanical Puller

121272823
4640: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-187-6634
Face Spanner Wrench Socket

121876634
30AM018: RNCC: 3 | RNVC: 2

24 Apr 1981

5120-12-306-0015
Verspannvorrichtung

123060015
530131: RNCC: 3 | RNVC: 2

17 Jan 1986

5120-12-193-0151
Druckstueck

121930151
601 589 01 63 00: RNCC: 3 | RNVC: 2
601589016300: RNCC: 3 | RNVC: 2

14 Jun 1982

5120-12-127-2563

5120-12-369-6143
Box Wrench

123696143
N000-5597: RNCC: 3 | RNVC: 2

1 Aug 2006

5120-12-134-2739

5120-12-170-8663
Dorn

121708663
342087: RNCC: 3 | RNVC: 2
342087: RNCC: 5 | RNVC: 2
342087: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-382-2176
Pliers

123822176
0621200C: RNCC: 3 | RNVC: 2

21 May 2010

5120-12-331-8543
Socket Wrench Handle Bar

123318543
81668076016: RNCC: 3 | RNVC: 9

29 Jun 1993

5120-12-126-2546
Scratch Awl

121262546
NO PRIMARY REF 12-126-2546: RNCC: 3 | RNVC: 2
104499: RNCC: 5 | RNVC: 9
1825: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-0009
Torque Wrench

121900009
26-21C1449P011E: RNCC: 3 | RNVC: 2

2 Nov 1981

5120-12-322-2885
Schluessel

123222885
271-01-0402: RNCC: 3 | RNVC: 2
271-01-0402: RNCC: 5 | RNVC: 9

8 Aug 1990

5120-12-336-9960
Hand Terminal Crimping Tool

123369960
VG95236T14B0002: RNCC: 2 | RNVC: 2
900645: RNCC: 3 | RNVC: 2
PZ50: RNCC: 3 | RNVC: 2

9 Jan 1995

5120-12-186-7351
Seal Inserter

121867351
99366627: RNCC: 3 | RNVC: 2
445060: RNCC: 5 | RNVC: 9
445060: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-328-9957
Hand Beading Tool

123289957
15342801: RNCC: 3 | RNVC: 2
153 428 01: RNCC: 5 | RNVC: 2

8 Jul 1992

5120-12-332-5318
Ge Montierwerkzeug

123325318
3184: RNCC: 3 | RNVC: 2

18 Aug 1993

5120-12-192-5420
Lamp Extractor

121925420
3SX1301: RNCC: 3 | RNVC: 2

3 May 1982

5120-12-180-0961
Socket Wrench Crowfoot Attachment

121800961
320-991108: RNCC: 3 | RNVC: 2

20 Aug 1979

5120-12-005-0339

5120-12-371-7693
Ge Montierwerkzeug

123717693
80996066109: RNCC: 3 | RNVC: 2
80.99606-6109: RNCC: 5 | RNVC: 2

14 May 2007

5120-12-120-5616
Hand Hammer

121205616
NO PRIMARY REF 12-120-5616: RNCC: 3 | RNVC: 2
2967-100MST: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-149-9858
Torque Wrench

121499858
NO PRIMARY REF 12-149-9858: RNCC: 3 | RNVC: 2
109601: RNCC: 5 | RNVC: 9
171247: RNCC: 5 | RNVC: 9
7451F: RNCC: 5 | RNVC: 9
7451M: RNCC: 5 | RNVC: 9
5120-40372: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-172-9107
Haltevorrichtung

121729107
VG95211-ML-121729107: RNCC: 2 | RNVC: 2
1X56 136 643: RNCC: 3 | RNVC: 2
1X56136643: RNCC: 5 | RNVC: 9

2 Mar 1978

5120-12-319-8130
Slip Joint Pliers

123198130
DIN5231F-115: RNCC: 2 | RNVC: 2
70500-125: RNCC: 5 | RNVC: 2
250A-08-0803: RNCC: 5 | RNVC: 2
250A-08-0803: RNCC: 5 | RNVC: 9

7 Nov 1989

5120-12-373-1819
Combination Box And Open End Wrench

123731819
11M-16: RNCC: 3 | RNVC: 2

8 Oct 2007

5120-12-157-6777
Kabelschuhh Matrize

121576777
B185WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-330-4883
Spanner Wrench

123304883
591801-9079.000: RNCC: 3 | RNVC: 2

22 Dec 1992

5120-12-300-1839
Spanner Wrench

123001839
IR915088: RNCC: 3 | RNVC: 2
4900229-38: RNCC: 5 | RNVC: 2

12 Jul 1984

5120-12-024-7156

5120-12-126-6545

5120-12-350-8379
Hydraulic Jack Handle

123508379
99466707: RNCC: 3 | RNVC: 2

26 May 2000

5120-12-135-2945

5120-12-327-7045
Mechanical Puller

123277045
2300013-7122.00: RNCC: 2 | RNVC: 2
9875965: RNCC: 3 | RNVC: 2
9875965: RNCC: 5 | RNVC: 2
2300013-7122.00: RNCC: 5 | RNVC: 9
9875965: RNCC: 5 | RNVC: 9

20 Feb 1992

5120-12-391-7620
Pliers

123917620
30661: RNCC: 3 | RNVC: 2
Z06916160: RNCC: 5 | RNVC: 2
Z06916-160: RNCC: 5 | RNVC: 2

4 Apr 2013

5120-12-185-3922
Spanner Wrench

121853922
M9-5X0-5CZN1171SCHAFTGEBLANI: RNCC: 3 | RNVC: 2

3 Oct 1980

5120-12-129-7760

5120-12-126-5917
Sheet Metalworking Dolly Block

121265917
1637: RNCC: 3 | RNVC: 2
031A305: RNCC: 3 | RNVC: 2
256: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-023-0161

5120-12-313-4273
Mechanical Puller Attachment

123134273
80996020161: RNCC: 3 | RNVC: 2
80.99602.0035: RNCC: 5 | RNVC: 2
80996020035: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-163-6070
Einfuehr- Huelse

121636070
VG95211-ML-121636070: RNCC: 2 | RNVC: 2
105-10151W2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-156-1534
Socket Wrench

121561534
NM392-08: RNCC: 3 | RNVC: 2
NM392-08: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-319-4364
Lager- Und Einsatz

123194364
99374025: RNCC: 3 | RNVC: 2

2 Oct 1989

5120-12-070-0152

5120-12-336-6642
Crimping Tool Die

123366642
09990000111: RNCC: 3 | RNVC: 2
0999000011100: RNCC: 5 | RNVC: 2
09990000111: RNCC: 5 | RNVC: 2
114-7712: RNCC: 5 | RNVC: 2
114-7712: RNCC: 5 | RNVC: 2

6 Dec 1994

5120-12-176-2825
Montagewerkzeug

121762825
403589016300: RNCC: 3 | RNVC: 2

23 Nov 1978

5120-12-362-4720
Combination Box And Open End Wrench

123624720
54.0084.960.51: RNCC: 3 | RNVC: 2
13-17: RNCC: 5 | RNVC: 2

27 Feb 2004

5120-12-362-4583
Open End Wrench

123624583
54.0084.960.38: RNCC: 3 | RNVC: 2
10-4X5: RNCC: 5 | RNVC: 2

26 Feb 2004

5120-12-170-8188

5120-12-346-5743
Open End Box Wrench

123465743
RX18A: RNCC: 3 | RNVC: 2

12 Aug 1998

5120-12-166-2580
Spanner Wrench

121662580
1687950097: RNCC: 3 | RNVC: 2
KDEP2990: RNCC: 5 | RNVC: 9

19 Aug 1976

5120-12-341-0017
Socket Wrench Socket

123410017
770-SM21: RNCC: 3 | RNVC: 2
1000Z-21: RNCC: 3 | RNVC: 2
001491: RNCC: 5 | RNVC: 2
770S-21: RNCC: 5 | RNVC: 2

16 Jul 1996

5120-12-363-8355
Bearing And Bushing Inserter And Remover

123638355
T671P5001104: RNCC: 3 | RNVC: 2

29 Jul 2004

5120-12-328-9185
Pin Vise

123289185
4512013: RNCC: 3 | RNVC: 2

1 Jul 1992

5120-12-354-8191
Seal Inserter

123548191
F6554698: RNCC: 3 | RNVC: 2

28 Aug 2001

5120-12-359-4734
Socket Wrench Adapter-Extension

123594734
AS576-1833A-04: RNCC: 3 | RNVC: 2

10 Feb 2003

5120-12-351-9615
Hand Hammer

123519615
5036040045: RNCC: 3 | RNVC: 2
5036.04.0045: RNCC: 5 | RNVC: 2

20 Sep 2000

5120-12-121-1337
Pliers

121211337
665SCB: RNCC: 3 | RNVC: 2
0058044: RNCC: 5 | RNVC: 2
2656S: RNCC: 5 | RNVC: 2
26-140: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-379-6581
Face Spanner Wrench Socket

123796581
0854 7060: RNCC: 3 | RNVC: 2

19 Aug 2009

5120-12-365-5396
Flat Tip Screwdriver

123655396
47241060-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-384-3079
Socket Wrench Socket

123843079
F30378352: RNCC: 3 | RNVC: 2

11 Feb 2011

5120-12-141-5647

5120-12-135-3867

5120-12-130-7968
Fliehk Haltebuegel

121307968
NO PRIMARY REF 12-130-7968: RNCC: 3 | RNVC: 2
2327: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-331-5892
Seal Inserter

123315892
VW10-203: RNCC: 3 | RNVC: 2

25 May 1993

5120-12-190-5613
Gegenhalter

121905613
416190: RNCC: 3 | RNVC: 2

2 Dec 1981

5120-12-357-4121
Lifting Pneumatic Bag

123574121
121 00 000: RNCC: 3 | RNVC: 2

18 Jun 2002

5120-12-366-8631
Socket Wrench Crowfoot Attachment

123668631
440MJ27: RNCC: 3 | RNVC: 2
02210027: RNCC: 5 | RNVC: 2
02210027: RNCC: 5 | RNVC: 2

16 Jun 2005

5120-12-172-5286
Keil

121725286
02010306006: RNCC: 3 | RNVC: 9

23 Jan 1978

5120-12-348-7176
Socket Wrench Crowfoot Attachment

123487176
F30373587: RNCC: 3 | RNVC: 2

10 Aug 1999

5120-12-353-8486
Socket Wrench

123538486
001589510900: RNCC: 3 | RNVC: 2
001589510900: RNCC: 5 | RNVC: 2
001589510900: RNCC: 5 | RNVC: 2

15 May 2001

5120-12-393-6883
Mechanical Puller Attachment

123936883
A-0261-005-05: RNCC: 3 | RNVC: 2

2 Oct 2013

5120-12-123-5036

5120-12-132-1659
Socket Wrench

121321659
25-32: RNCC: 3 | RNVC: 2
5164866: RNCC: 5 | RNVC: 2
28M-32: RNCC: 5 | RNVC: 9
91A-32-CR: RNCC: 5 | RNVC: 9
075110: RNCC: 5 | RNVC: 9
75-32: RNCC: 5 | RNVC: 9
211621: RNCC: 5 | RNVC: 9
25-32: RNCC: 5 | RNVC: 9
25-32: RNCC: 5 | RNVC: 9
1834821: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-362-4332
Zangensatz

123624332
T3703D: RNCC: 3 | RNVC: 2

24 Feb 2004

5120-12-380-6581
Ratchet Wrench

123806581
503.4817: RNCC: 3 | RNVC: 2

17 Nov 2009

5120-12-357-2286
Duese Reiniger

123572286
0986611142: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-367-8673
Rohrbiege Aufnahme

123678673
581460: RNCC: 3 | RNVC: 2
1011581460: RNCC: 5 | RNVC: 2
REMS581460: RNCC: 5 | RNVC: 2

25 Oct 2005

5120-12-391-3263
Plug Electrical Connector Extractor

123913263
1553: RNCC: 3 | RNVC: 2
74620003: RNCC: 5 | RNVC: 2

6 Mar 2013

5120-12-357-5194
Eindrueckwerkzeug

123575194
80996066030: RNCC: 3 | RNVC: 2
80.99606-6030: RNCC: 5 | RNVC: 2

27 Jun 2002

5120-12-139-8577

5120-12-168-5148
Verbindungsbuechse

121685148
VG95211-ML-121685148: RNCC: 2 | RNVC: 2
160-88507-05: RNCC: 3 | RNVC: 2
160-88507-05: RNCC: 5 | RNVC: 9

18 Mar 1977

5120-12-369-0349
Box Wrench

123690349
TL5120-0078-185: RNCC: 2 | RNVC: 2
DIN837-B30X34: RNCC: 5 | RNVC: 1

16 May 2006

5120-12-155-8251
Wrench Kit

121558251
6824NZ: RNCC: 3 | RNVC: 2
108939: RNCC: 5 | RNVC: 2
1089399: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-364-3129
Socket Wrench Socket

123643129
01030009-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-389-9716
Torque Wrench

123899716
50031200: RNCC: 3 | RNVC: 2

19 Sep 2012

5120-12-364-5981
Spanner Wrench

123645981
385589070700: RNCC: 3 | RNVC: 2

13 Oct 2004

5120-12-342-8610
Mechanical Puller

123428610
111 111 0001/2: RNCC: 3 | RNVC: 2
L1Z BD IT-5.4: RNCC: 5 | RNVC: 2

10 Apr 1997

5120-12-155-0187
Open End Wrench

121550187
NO PRIMARY REF 12-155-0187: RNCC: 3 | RNVC: 2
5M.8936.222.11: RNCC: 5 | RNVC: 2
5M8936-222-11: RNCC: 5 | RNVC: 2
1953C-M14X17: RNCC: 5 | RNVC: 9
105780: RNCC: 5 | RNVC: 9
179976: RNCC: 5 | RNVC: 9
1953M14X17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-390-1509
Quick Adjusting Screw Clamp

123901509
SQ-20-SP-BG: RNCC: 3 | RNVC: 2

10 Oct 2012

5120-12-314-7202
Ge Montierwerkzeug

123147202
1743204: RNCC: 3 | RNVC: 2

3 Aug 1988

5120-12-353-4704
Montierdorn

123534704
323817: RNCC: 3 | RNVC: 2
961708: RNCC: 5 | RNVC: 2
323817: RNCC: 5 | RNVC: 2

28 Mar 2001

5120-12-310-9880
We Montierwerkzeug

123109880
1X56137201: RNCC: 3 | RNVC: 2
620589003100: RNCC: 5 | RNVC: 2

15 Jul 1987

5120-12-311-6799
Bearing And Bushing Inserter

123116799
80996140043: RNCC: 3 | RNVC: 2
80.99614.0043: RNCC: 5 | RNVC: 2
V822: RNCC: 5 | RNVC: 2

6 Oct 1987

5120-12-194-9615
Monta Gewindestueck

121949615
1X56136495: RNCC: 3 | RNVC: 2

22 Dec 1982

5120-12-192-1292
Abziehvorrichtung

121921292
1683462022: RNCC: 3 | RNVC: 2
EFEP372: RNCC: 3 | RNVC: 2

24 Mar 1982

5120-12-321-2121
Socket Wrench Crowfoot Attachment

123212121
105-45021W8: RNCC: 3 | RNVC: 2

17 Apr 1990

5120-12-357-7537
Ru Montierwerkzeug

123577537
RD99-00-012000.02: RNCC: 3 | RNVC: 2

19 Jul 2002

5120-12-166-2279
Schraubendreher

121662279
1687950006: RNCC: 3 | RNVC: 2
KDEP2873: RNCC: 5 | RNVC: 9

13 Aug 1976

5120-12-377-1762
Mechanical Puller

123771762
305616: RNCC: 3 | RNVC: 2

16 Dec 2008

5120-12-044-4895

5120-12-346-4116
Rack Bar Jack

123464116
14 32 186: RNCC: 3 | RNVC: 2

22 Jul 1998

5120-12-324-6153
Seal Inserter

123246153
601589024300: RNCC: 3 | RNVC: 2

7 Mar 1991

5120-12-315-6958
Spanner Wrench

123156958
503663: RNCC: 3 | RNVC: 2

22 Nov 1988

5120-12-335-1041
Socket Wrench Socket

123351041
580589000800: RNCC: 3 | RNVC: 2

25 Jul 1994

5120-12-386-2948
Pliers

123862948
50.000.083: RNCC: 3 | RNVC: 2

22 Aug 2011

5120-12-135-5981

5120-12-129-8780
Abziehzange

121298780
1687965014: RNCC: 3 | RNVC: 2
EF3147: RNCC: 5 | RNVC: 2
KDAW9995-3: RNCC: 5 | RNVC: 9
1687965014: RNCC: 5 | RNVC: 9
EF3147: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-365-1254
Drive Pin Punch

123651254
JDMS8-13-100: RNCC: 3 | RNVC: 2

30 Nov 2004

5120-12-130-3384
Tap And Reamer Extension

121303384
DIN377-16: RNCC: 2 | RNVC: 2
83336: RNCC: 3 | RNVC: 2
207117: RNCC: 3 | RNVC: 2
3110-16: RNCC: 3 | RNVC: 2
807-16: RNCC: 3 | RNVC: 2
16DIN377: RNCC: 5 | RNVC: 2
4826-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-339-8432
Swivel Knob Jeweler's Screwdriver

123398432
242 000 90: RNCC: 3 | RNVC: 2
T4882X 000: RNCC: 3 | RNVC: 2
7278PH-000: RNCC: 3 | RNVC: 2
1827823: RNCC: 5 | RNVC: 2

24 Jan 1996

5120-12-390-5850
Caulking Gun

123905850
18206: RNCC: 3 | RNVC: 2
SIKA BHP 600: RNCC: 5 | RNVC: 2
7112474: RNCC: 5 | RNVC: 2

26 Nov 2012

5120-12-384-1623
Open End Wrench

123841623
WM 22828: RNCC: 3 | RNVC: 2

28 Jan 2011

5120-12-372-3079
Schluesseleinsatz

123723079
S281I30A1001: RNCC: 3 | RNVC: 2

5 Jul 2007

5120-12-093-7700

5120-12-173-0338
Spanner Wrench

121730338
709126-0000902: RNCC: 3 | RNVC: 2
709126-0000.902: RNCC: 5 | RNVC: 2

15 Mar 1978

5120-12-702-9028
Schluessel

127029028
4709100-50-1: RNCC: 3 | RNVC: 2

5 Sep 1996

5120-12-023-2543

5120-12-326-5284
Bearing And Bushing Inserter

123265284
4900331: RNCC: 3 | RNVC: 2

1 Oct 1991

5120-12-312-4096
Screwdriver And Wrench Assembly

123124096
KDEP2966: RNCC: 3 | RNVC: 2
KDEP 2966: RNCC: 5 | RNVC: 2

29 Dec 1987

5120-12-338-0659
Schluessel

123380659
1H0011221: RNCC: 3 | RNVC: 2

17 May 1995

5120-12-381-9283
Slip Joint Pliers

123819283
0503000C: RNCC: 3 | RNVC: 2

19 Apr 2010

5120-12-350-2707
Bl Ausbeulwerkzeug

123502707
141: RNCC: 3 | RNVC: 2

9 Mar 2000

5120-12-342-6784
Ratchet Wrench

123426784
25-14X15: RNCC: 3 | RNVC: 2
41131415: RNCC: 5 | RNVC: 2

13 Mar 1997

5120-12-094-0213

5120-12-182-5244
Druckstueck

121825244
VW460-3: RNCC: 3 | RNVC: 9

8 Feb 1980

5120-12-357-9999
Ratchet Wrench

123579999
3293U-3: RNCC: 3 | RNVC: 2

29 Aug 2002

5120-12-374-5963
Hand Lead Seal Press

123745963
1141106-00: RNCC: 3 | RNVC: 2

28 Feb 2008

5120-12-373-4615
Socket Head Screw Key

123734615
0613 131 10: RNCC: 3 | RNVC: 2

6 Nov 2007

5120-12-373-2619
Socket Wrench Screwdriver Attachment

123732619
8502-T8: RNCC: 3 | RNVC: 2

15 Oct 2007

5120-12-363-8361
Bearing And Bushing Inserter

123638361
T671P5001110: RNCC: 3 | RNVC: 2

29 Jul 2004

5120-12-373-3522
Mechanical Puller

123733522
L133M7901101: RNCC: 3 | RNVC: 2

24 Oct 2007

5120-12-385-5560
Rotat Holding Tool

123855560
F6452221: RNCC: 3 | RNVC: 2

15 Jun 2011

5120-12-313-7908
Ratchet Wrench

123137908
31KR14: RNCC: 3 | RNVC: 2
625 361: RNCC: 5 | RNVC: 2

5 May 1988

5120-12-182-5434
Face Spanner Wrench Socket

121825434
105-45051W5: RNCC: 3 | RNVC: 2

8 Feb 1980

5120-12-123-5993
Socket Wrench Socket

121235993
NO PRIMARY REF 12-123-5993: RNCC: 3 | RNVC: 2
7410DZ5-16: RNCC: 5 | RNVC: 9
A7410DZ-5/16: RNCC: 5 | RNVC: 9
182041: RNCC: 5 | RNVC: 9
109519: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-191-7978
Screwdriver Bit

121917978
990-5: RNCC: 3 | RNVC: 2
54X5: RNCC: 3 | RNVC: 2
3024 5: RNCC: 3 | RNVC: 2
1404411: RNCC: 3 | RNVC: 2
55010: RNCC: 5 | RNVC: 2
03060005: RNCC: 5 | RNVC: 2
52516050: RNCC: 5 | RNVC: 2
1404411-9: RNCC: 5 | RNVC: 9
1404411/9: RNCC: 5 | RNVC: 9
2487170001: RNCC: 5 | RNVC: 9

5 Mar 1982

5120-12-175-9628
Solid Center Punch

121759628
51296500: RNCC: 3 | RNVC: 2
3643-100: RNCC: 3 | RNVC: 2
105-100X10: RNCC: 3 | RNVC: 2
51296010: RNCC: 3 | RNVC: 9
957323: RNCC: 5 | RNVC: 2
107465: RNCC: 5 | RNVC: 2
70050001: RNCC: 5 | RNVC: 2
70050001: RNCC: 5 | RNVC: 2
51296-100: RNCC: 5 | RNVC: 9
70 05 00 01: RNCC: 5 | RNVC: 9

30 Oct 1978

5120-12-178-6716
Socket Wrench

121786716
98035083660: RNCC: 3 | RNVC: 2
0133: RNCC: 5 | RNVC: 2

9 May 1979

5120-12-317-1476
Crimping Tool Die

123171476
300455458: RNCC: 3 | RNVC: 2

14 Mar 1989

5120-12-364-8582
Op Montierwerkzeug

123648582
5520111: RNCC: 3 | RNVC: 2

9 Nov 2004

5120-12-173-8177
Combination Open End And Spanner Wrench

121738177
0191877: RNCC: 3 | RNVC: 9
FZM10900: RNCC: 5 | RNVC: 9

16 May 1978

5120-12-315-3877
Aligning Punch

123153877
503655: RNCC: 3 | RNVC: 2

19 Oct 1988

5120-12-331-2404
Lamp Extractor

123312404
5.05800.028: RNCC: 3 | RNVC: 2
5L.8949.001.11: RNCC: 5 | RNVC: 2
0005331632: RNCC: 5 | RNVC: 2

6 Apr 1993

5120-12-324-1268
Inspection Mirror

123241268
2-282: RNCC: 3 | RNVC: 2

23 Jan 1991

5120-12-156-6212
Spanner Wrench

121566212
DIN3116-C35: RNCC: 2 | RNVC: 2
DIN3116C35: RNCC: 3 | RNVC: 2
C35DIN3116: RNCC: 5 | RNVC: 2
1304211: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-0162
Schluessel

121550162
54.2924.035.00: RNCC: 3 | RNVC: 2
54-2924-035-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-339-3224
Bearing And Bushing Inserter

123393224
E11.59699-0043: RNCC: 3 | RNVC: 2
596-050: RNCC: 5 | RNVC: 2
596-050: RNCC: 5 | RNVC: 9
E11.59699-0043: RNCC: 5 | RNVC: 9

9 Nov 1995

5120-12-337-1483
Mechan Druckstueck

123371483
0852 3766: RNCC: 3 | RNVC: 2
8523766: RNCC: 5 | RNVC: 2

25 Jan 1995

5120-12-369-3071
Open End Wrench

123693071
AE0028: RNCC: 3 | RNVC: 2

20 Jun 2006

5120-12-180-0959
Socket Wrench Crowfoot Attachment

121800959
320-991106: RNCC: 3 | RNVC: 2

20 Aug 1979

5120-12-309-5808
Socket Head Screw Key

123095808
52 141 030: RNCC: 3 | RNVC: 9
52141030: RNCC: 5 | RNVC: 2

4 Feb 1987

5120-12-175-8179
Spanner Wrench

121758179
264-624: RNCC: 3 | RNVC: 2

8 Dec 2003

5120-12-323-4105
Woven Cable Grip

123234105
01529: RNCC: 3 | RNVC: 2

23 Nov 1990

5120-12-152-8557

5120-12-383-6408
Open End Wrench

123836408
1216505: RNCC: 3 | RNVC: 2

17 Nov 2010

5120-12-123-7100

5120-12-330-9214
Slip Joint Pliers

123309214
292624: RNCC: 3 | RNVC: 2
8807250: RNCC: 3 | RNVC: 2

25 Feb 1993

5120-12-334-8348
Boerdelwer Einsatz

123348348
1650MA: RNCC: 3 | RNVC: 2
68030002: RNCC: 5 | RNVC: 2

27 Jun 1994

5120-12-325-8876
Mechanical Puller Step Plate

123258876
8206479: RNCC: 3 | RNVC: 2
8523675: RNCC: 5 | RNVC: 9

18 Jul 1991

5120-12-173-3257
Pliers

121733257
2005-125: RNCC: 3 | RNVC: 2
5980001: RNCC: 3 | RNVC: 2
2724B: RNCC: 3 | RNVC: 9
DIN5258-A125: RNCC: 4 | RNVC: 1
106760: RNCC: 5 | RNVC: 2
671126: RNCC: 5 | RNVC: 9
A125DIN5258: RNCC: 5 | RNVC: 9

5 Apr 1978

5120-12-335-4104
Mechanical Puller

123354104
0852 3043: RNCC: 3 | RNVC: 2
8523043: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-387-0178
Spanner Wrench

123870178
1230-12601: RNCC: 3 | RNVC: 2
80.99606-6135: RNCC: 5 | RNVC: 2
80996066135: RNCC: 5 | RNVC: 2

26 Oct 2011

5120-12-393-7601
Spanner Wrench

123937601
10179848: RNCC: 3 | RNVC: 2

9 Oct 2013

5120-12-336-5087
Ku Montierwerkzeug

123365087
0852 5014: RNCC: 3 | RNVC: 2
8525014: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-365-5392
Socket Wrench Screwdriver Attachment

123655392
01050003-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-150-6256
Socket Wrench

121506256
510282: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-316-2294
Catch Lever Tool

123162294
5184882: RNCC: 3 | RNVC: 2

3 Jan 1989

5120-12-344-6433
Mechanical Puller

123446433
99342145: RNCC: 3 | RNVC: 2

19 Nov 1997

5120-12-151-6578
Eindrueckvorrichtun

121516578
100199-1100V3: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-320-4839
Spanner Wrench

123204839
23190040: RNCC: 3 | RNVC: 9

18 Jan 1990

5120-12-362-4717
Combination Box And Open End Wrench

123624717
54.0084.960.48: RNCC: 3 | RNVC: 2
13-14: RNCC: 5 | RNVC: 2

27 Feb 2004

5120-12-388-8128
Montierwer Einsatz

123888128
5111013-000.02: RNCC: 2 | RNVC: 2
5111013-000.02: RNCC: 3 | RNVC: 2

25 Apr 2012

5120-12-314-7036
Mechanical Puller

123147036
F11.49025-0133: RNCC: 3 | RNVC: 2

30 Jul 1988

5120-12-381-5419
Socket Wrench Socket

123815419
46A15-16: RNCC: 3 | RNVC: 2
02420046: RNCC: 5 | RNVC: 2

2 Mar 2010

5120-12-363-8852
Bearing And Bushing Inserter

123638852
T670P5001217: RNCC: 3 | RNVC: 2

3 Aug 2004

5120-12-364-5957
Socket Wrench Crowfoot Attachment

123645957
01190011-TCS: RNCC: 3 | RNVC: 2

13 Oct 2004

5120-12-347-9661
Socket Wrench

123479661
80996030255: RNCC: 3 | RNVC: 2
80.99603.0255: RNCC: 5 | RNVC: 2

17 Mar 1999

5120-12-173-5759
Socket Wrench

121735759
009-017.620-000W4: RNCC: 3 | RNVC: 2
009-017-620-000W4: RNCC: 5 | RNVC: 9

24 Apr 1978

5120-12-136-7426

5120-12-146-0128
Socket Wrench

121460128
5072706: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-322-0716
Ausdrueckwerkzeug

123220716
0852 4104: RNCC: 3 | RNVC: 2
8524104: RNCC: 5 | RNVC: 2

20 Jul 1990

5120-12-021-5715

5120-12-332-9311
Schluesseleinsatz

123329311
D065916039201: RNCC: 3 | RNVC: 2

6 Oct 1993

5120-12-341-3569
Socket Wrench

123413569
123 581 0067: RNCC: 3 | RNVC: 2

28 Aug 1996

5120-12-356-7026
Drive Pin Punch

123567026
V843: RNCC: 3 | RNVC: 2

26 Mar 2002

5120-12-349-4021
Backing Out Punch

123494021
0986612115: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-190-5768
Spannklotz

121905768
6008R-2400.01.0: RNCC: 3 | RNVC: 2
6008R-2400.01.0: RNCC: 5 | RNVC: 2
6008R-2400.01.0: RNCC: 5 | RNVC: 2

7 Dec 1981

5120-12-196-1531
Mechanical Puller

121961531
VG95211-ML-121961531: RNCC: 2 | RNVC: 2
1.3-4055-407: RNCC: 3 | RNVC: 2
MAGERD 8695: RNCC: 5 | RNVC: 9

7 Jun 1983

5120-12-180-0997
Screwdriver Bit

121800997
P-895107-403: RNCC: 3 | RNVC: 2
P895107-403: RNCC: 5 | RNVC: 2
MAGERD 6107: RNCC: 5 | RNVC: 9

20 Aug 1979

5120-12-364-4724
Socket Wrench Extension

123644724
12010004-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-133-3657
Ausziehvorrichtung

121333657
4D13982: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-388-8478
Mechanical Puller

123888478
611589013300: RNCC: 3 | RNVC: 2

27 Apr 2012

5120-12-147-4321
Einbauwerkz Spindel

121474321
01500610020: RNCC: 3 | RNVC: 2
0200245: RNCC: 5 | RNVC: 2
01556100010: RNCC: 5 | RNVC: 9
UD110: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-338-0446
Screw Thread Insert Tang Breakoff Tool

123380446
01586090000: RNCC: 3 | RNVC: 2

16 May 1995

5120-12-371-3925
Socket Head Screw Key

123713925
42KEL3: RNCC: 3 | RNVC: 2
410-030-08: RNCC: 3 | RNVC: 2
047.03: RNCC: 5 | RNVC: 2
6370250: RNCC: 5 | RNVC: 2
83S.3L: RNCC: 5 | RNVC: 2
00.42.06.35: RNCC: 5 | RNVC: 2

23 Mar 2007

5120-12-188-7644
Pliers

121887644
3.9314-5700.6: RNCC: 3 | RNVC: 2
000589503700: RNCC: 5 | RNVC: 2
3931457006: RNCC: 5 | RNVC: 2

28 Jul 1981

5120-12-376-4071
Screwdriver Bit

123764071
05002926001: RNCC: 3 | RNVC: 2
82-PH3-1,2X7,0: RNCC: 5 | RNVC: 2

25 Sep 2008

5120-12-170-9763
Open End Wrench

121709763
DIN133-200: RNCC: 2 | RNVC: 2
2300-200: RNCC: 3 | RNVC: 2
200DIN133: RNCC: 5 | RNVC: 9

26 Aug 1977

5120-12-336-1675
Torque Wrench Adapter

123361675
4900399-411110.07: RNCC: 2 | RNVC: 2
4900399-411110.07: RNCC: 3 | RNVC: 2

3 Nov 1994

5120-12-197-4796
Electrical Contact Remover

121974796
PUL-IC40: RNCC: 3 | RNVC: 2
PUL-IC36/40: RNCC: 5 | RNVC: 2
54175099: RNCC: 5 | RNVC: 2
54701599: RNCC: 5 | RNVC: 2
81047015: RNCC: 5 | RNVC: 2

25 Oct 1983

5120-12-330-3160
Elektron Auszieher

123303160
104: RNCC: 3 | RNVC: 2
103-952: RNCC: 5 | RNVC: 2
39-9937: RNCC: 5 | RNVC: 2

2 Dec 1992

5120-12-387-1923
Bearing And Bushing Remover

123871923
F6789433: RNCC: 3 | RNVC: 2

14 Nov 2011

5120-12-132-2193
Hand Screw Starter

121322193
9749: RNCC: 3 | RNVC: 2
110845: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-044-4879

Load More Results