What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 18 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 18 of 62

5120-12-306-5331
Boerdelwer Einsatz

123065331
105-41069W3: RNCC: 3 | RNVC: 2

6 Mar 1986

5120-12-313-3995
Mechanical Puller Attachment

123133995
80996020024: RNCC: 3 | RNVC: 2
80.99602.0024: RNCC: 5 | RNVC: 2

29 Mar 1988

5120-12-155-8788
Platea Abschlaeger

121558788
4263161: RNCC: 3 | RNVC: 2
17081: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-9584
Seal Inserter

123059584
01TC33602: RNCC: 3 | RNVC: 2

14 Jan 1986

5120-12-363-8705
Bearing And Bushing Inserter And Remover

123638705
T670P5001105: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-316-0538
Socket Wrench Screwdriver Attachment

123160538
140305: RNCC: 3 | RNVC: 2

17 Dec 1988

5120-12-148-0665
Ventilmontagedorn

121480665
053908: RNCC: 3 | RNVC: 2
WZ79: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-702-9021
Spanner Wrench

127029021
4709100-90: RNCC: 3 | RNVC: 2

5 Sep 1996

5120-12-380-5205
Socket Wrench Socket

123805205
1878256894: RNCC: 3 | RNVC: 2

5 Nov 2009

5120-12-306-8046
Seal Inserter

123068046
9110405: RNCC: 3 | RNVC: 2
32000047102000: RNCC: 5 | RNVC: 2
81761355: RNCC: 5 | RNVC: 9
F.100 32 000 0471 02 000: RNCC: 5 | RNVC: 9

3 Apr 1986

5120-12-370-8852
Bearing And Bushing Inserter

123708852
80996040246: RNCC: 3 | RNVC: 2
80.99604-0246: RNCC: 5 | RNVC: 2

12 Jan 2007

5120-12-150-6198
Spanner Wrench

121506198
23176-264480-00-0: RNCC: 2 | RNVC: 2
23176-264480.00.0: RNCC: 2 | RNVC: 2
23176-264480.00.0: RNCC: 5 | RNVC: 2
23176-264480-00-0: RNCC: 5 | RNVC: 2
23176-264480-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-331-5298
Torque Wrench

123315298
CH-150-EH: RNCC: 3 | RNVC: 2
CH-150: RNCC: 5 | RNVC: 2

17 May 1993

5120-12-131-5424
Socket Head Screw Key

121315424
59183-4: RNCC: 3 | RNVC: 2
G35: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-140-6778
Montageschiene

121406778
R19485: RNCC: 3 | RNVC: 2
R19485: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-339-1133
Montierwerk Huelse

123391133
1X56137134: RNCC: 3 | RNVC: 2
0694817: RNCC: 5 | RNVC: 2

11 Oct 1995

5120-12-041-6066

5120-12-120-5229
Saddler's Awl Haft

121205229
4542414: RNCC: 3 | RNVC: 2
477: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-351-9582
Socket Head Screw Key

123519582
ISO2936-2L: RNCC: 2 | RNVC: 2

20 Sep 2000

5120-12-311-6479
Aufstec Schluessel

5120-12-373-3765
Schraub Spannbacke

123733765
L134M3201217: RNCC: 3 | RNVC: 2

26 Oct 2007

5120-12-161-7503

5120-12-343-3269
Socket Wrench Socket

123433269
417/1: RNCC: 3 | RNVC: 2
96112701: RNCC: 5 | RNVC: 2

5 Jun 1997

5120-12-158-9732
Electronic Equipment Alignment Tool

121589732
1-901: RNCC: 3 | RNVC: 2
700-1A: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-388-9345
M Indentation Tool

123889345
80996046032: RNCC: 3 | RNVC: 2
80.99604-6032: RNCC: 5 | RNVC: 2

8 May 2012

5120-12-379-6484
Rack Bar Jack

123796484
200265: RNCC: 3 | RNVC: 2
1094.8: RNCC: 5 | RNVC: 2

19 Aug 2009

5120-12-362-6203
Electrical Contact Remover

123626203
2500261-993501.000.0: RNCC: 2 | RNVC: 2
2500261-993501.000.0: RNCC: 3 | RNVC: 2

12 Mar 2004

5120-12-126-3384
Gum Einzieh- Ahle

121263384
36943: RNCC: 3 | RNVC: 2
C 5791 990: RNCC: 5 | RNVC: 2
C 5791 990: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-382-3097
Wrench

123823097
M34206: RNCC: 3 | RNVC: 2
M34206: RNCC: 5 | RNVC: 2

2 Jun 2010

5120-12-365-5305
Socket Wrench Set

123655305
T4819: RNCC: 3 | RNVC: 2

12 Jan 2005

5120-12-120-6766
Hammer Handle

121206766
723: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-176-2229
Drive Pin Punch

121762229
51288028: RNCC: 3 | RNVC: 9
957312: RNCC: 5 | RNVC: 2

13 Nov 1978

5120-12-365-2920
Seal Inserter

123652920
8096 798 001: RNCC: 3 | RNVC: 2

16 Dec 2004

5120-12-301-3644
Flat Tip Screwdriver

123013644
NO PRIMARY REF 12-301-3644: RNCC: 3 | RNVC: 2
1149P250X8: RNCC: 5 | RNVC: 9
1149P250X8: RNCC: 5 | RNVC: 9

10 Oct 1984

5120-12-150-3953
Kurbelw Schutzrohr

121503953
837589086300: RNCC: 3 | RNVC: 2
8375890863: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-145-3609
Schraubendreher

121453609
6180202: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-342-1968
Montierhuelse

123421968
5510404: RNCC: 3 | RNVC: 2

2 Jan 1997

5120-12-321-6128
Face Spanner Wrench Socket

123216128
272.369 545: RNCC: 2 | RNVC: 2
272.369 545: RNCC: 3 | RNVC: 2
CTWH-KPT14R: RNCC: 5 | RNVC: 2

7 Jun 1990

5120-12-151-8430

5120-12-348-8291
Hand Terminal Crimping Tool

123488291
72.012-730.002: RNCC: 3 | RNVC: 2

25 Aug 1999

5120-12-332-6136
Spanner Wrench

123326136
532117-8071.906: RNCC: 3 | RNVC: 2
532117-8071.906: RNCC: 5 | RNVC: 9

30 Aug 1993

5120-12-385-1015
Socket Wrench

123851015
252069010303: RNCC: 3 | RNVC: 2

2 May 2011

5120-12-369-0506
Inserted Hammer Face

123690506
3201030: RNCC: 3 | RNVC: 2
00.74.68.96: RNCC: 5 | RNVC: 2

17 May 2006

5120-12-171-9801
Spanner Wrench

121719801
302589000700: RNCC: 3 | RNVC: 2

5 Dec 1977

5120-12-334-0423
Gl Montierwerkzeug

123340423
7 622 13 04 03: RNCC: 3 | RNVC: 2

14 Mar 1994

5120-12-133-3994
Socket Head Screw Key Blade

121333994
NO PRIMARY REF 12-133-3994: RNCC: 3 | RNVC: 2
7809ZL5-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-334-6763
Swivel Knob Jeweler's Screwdriver

123346763
TL5120-0111-16: RNCC: 2 | RNVC: 2
010075: RNCC: 5 | RNVC: 9
2125-0,25X1,2: RNCC: 5 | RNVC: 9

8 Jun 1994

5120-12-144-5314
Dorn

121445314
0003-0200-000: RNCC: 3 | RNVC: 2
0003-0200-000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-1722
Mechanical Puller Adapter

121991722
83-139W32: RNCC: 3 | RNVC: 2

3 Apr 1984

5120-12-350-3248
Drive Pin Punch

123503248
5600023-990100.008.0: RNCC: 2 | RNVC: 2
5600023-990100.008.0: RNCC: 3 | RNVC: 2

15 Mar 2000

5120-12-350-2578
Bl Ausbeulwerkzeug

123502578
201/A: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-700-6200
Mattock-Pick Handle

127006200
4209385: RNCC: 3 | RNVC: 2
STIEL F. KREUZHACKE: RNCC: 5 | RNVC: 9

29 Sep 1992

5120-12-312-1886
Bearing And Bushing Remover

123121886
105-45041W7: RNCC: 3 | RNVC: 2

1 Dec 1987

5120-12-360-1956
Lifting Pneumatic Bag

123601956
416.1820: RNCC: 3 | RNVC: 2

16 Apr 2003

5120-12-358-1611
Flat Tip And Cross Tip Screwdriver Set

123581611
61393225: RNCC: 3 | RNVC: 2
613 932 25: RNCC: 5 | RNVC: 2

20 Sep 2002

5120-12-198-9868
Face Spanner Wrench Socket

121989868
01TC33012: RNCC: 3 | RNVC: 2

20 Mar 1984

5120-12-135-5962

5120-12-172-6490
Dorn

121726490
1X56136698: RNCC: 3 | RNVC: 2
0535941: RNCC: 5 | RNVC: 2
V136698: RNCC: 5 | RNVC: 2

3 Feb 1978

5120-12-359-6709
Auswechs Klemmteil

123596709
T623P3002120: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-194-8601
Bearing And Bushing Inserter

121948601
E4-2027170: RNCC: 3 | RNVC: 2
E4-2027170: RNCC: 5 | RNVC: 9

14 Dec 1982

5120-12-317-5193
Screwdriver Bit

123175193
F15012: RNCC: 3 | RNVC: 2

14 Apr 1989

5120-12-363-6156
Drive Pin Punch

123636156
T631P3005101: RNCC: 3 | RNVC: 2

9 Jul 2004

5120-12-174-7764
Jack Elevating Block

121747764
4045830080: RNCC: 3 | RNVC: 2

1 Aug 1978

5120-12-185-7862
Spanner Wrench

121857862
C249-A23-B35: RNCC: 3 | RNVC: 2
C249A23B35: RNCC: 3 | RNVC: 2
C 5707 991: RNCC: 5 | RNVC: 2
C 5707 991: RNCC: 5 | RNVC: 2

30 Oct 1980

5120-12-311-6795
Seal Inserter

123116795
80996170134: RNCC: 3 | RNVC: 2
80.99617.0134: RNCC: 5 | RNVC: 2
V954: RNCC: 5 | RNVC: 2

6 Oct 1987

5120-12-300-4456
Spring Inserter And Remover

123004456
2214: RNCC: 3 | RNVC: 2

1 Aug 1984

5120-12-199-9087
Fixed Open End Wrench Set

121999087
52 017010: RNCC: 3 | RNVC: 9

15 Jun 1984

5120-12-363-9554
Bearing And Bushing Inserter And Remover

123639554
T671P5002116: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-195-1741
Combination Box And Open End Wrench

121951741
0X19: RNCC: 3 | RNVC: 2

20 Jan 1983

5120-12-336-6459
Electrical Contact Inserter

123366459
09990000059: RNCC: 3 | RNVC: 2

5 Dec 1994

5120-12-196-2632
Torque Wrench Adapter

121962632
01TC32526: RNCC: 3 | RNVC: 2

22 Jun 1983

5120-12-126-3303

5120-12-139-2536
Mechanical Puller

121392536
006M03400: RNCC: 3 | RNVC: 2
VM70870: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-120-6780
Sheet Metalworking Dolly Block

121206780
031A301: RNCC: 3 | RNVC: 2
3006: RNCC: 5 | RNVC: 2
56370: RNCC: 5 | RNVC: 9
1916: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-372-3680
Plier Clamp

123723680
709900: RNCC: 3 | RNVC: 2
4524510: RNCC: 5 | RNVC: 2

11 Jul 2007

5120-12-176-6862
Zentrier- Dorn

121766862
425589006100: RNCC: 3 | RNVC: 2

13 Dec 1978

5120-12-174-4886
Screwdriver Bit

121744886
8808-8: RNCC: 3 | RNVC: 2
2817-137: RNCC: 5 | RNVC: 2
2817137: RNCC: 5 | RNVC: 2
54867: RNCC: 5 | RNVC: 2
2486170003: RNCC: 5 | RNVC: 2
INX-8: RNCC: 5 | RNVC: 9

3 Jul 1978

5120-12-133-3527
Box Wrench

121333527
NO PRIMARY REF 12-133-3527: RNCC: 3 | RNVC: 2
103989: RNCC: 5 | RNVC: 9
1300M24X26: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-382-5931
Torque Wrench

123825931
51060050-TCS: RNCC: 3 | RNVC: 2

14 Jul 2010

5120-12-389-5116
Torque Wrench Adapter

123895116
R809307: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-341-6182
Sheet Metalworking Stake

123416182
140A60: RNCC: 3 | RNVC: 2
1401060: RNCC: 5 | RNVC: 2

2 Oct 1996

5120-12-364-1168
Verspannvorrichtung

123641168
T661P1002106: RNCC: 3 | RNVC: 2

21 Aug 2004

5120-12-363-9849
Bearing And Bushing Inserter

123639849
T671P5002270: RNCC: 3 | RNVC: 2

10 Aug 2004

5120-12-140-9177
Dorn

121409177
4235: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-151-5869
Montagevorrichtung

121515869
837589003100: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-159-5795
Mechanical Puller

121595795
3125891733: RNCC: 3 | RNVC: 2
312589173300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-316-7597
Mecha Aufnahmeteil

123167597
105-14101W8.02: RNCC: 3 | RNVC: 2

9 Feb 1989

5120-12-194-0851
Torque Wrench Adapter

121940851
TL5120-0086-890: RNCC: 2 | RNVC: 2
22/DC-22: RNCC: 5 | RNVC: 9
6263110020: RNCC: 5 | RNVC: 9
6612C-22: RNCC: 5 | RNVC: 9
733/10 22: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-171-3161
Stempel

121713161
VG95211-ML-121713161: RNCC: 2 | RNVC: 2
105-31781W5.03: RNCC: 3 | RNVC: 2
105-31781W5-03: RNCC: 5 | RNVC: 2

29 Sep 1977

5120-12-163-8270
Abzieher Buchse

121638270
20003: RNCC: 3 | RNVC: 2
80.99616-0012: RNCC: 5 | RNVC: 2
80996160012: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-339-9698
Eindrueckwerkzeug

123399698
5070873: RNCC: 3 | RNVC: 2
698-461-0040: RNCC: 5 | RNVC: 2

7 Feb 1996

5120-12-322-3941
Spanner Wrench

123223941
12791-111100.006: RNCC: 2 | RNVC: 2
009-039.112-006W2: RNCC: 3 | RNVC: 2
12791-111100.006: RNCC: 5 | RNVC: 2

17 Aug 1990

5120-12-388-5490
Torque Wrench

123885490
008.005: RNCC: 3 | RNVC: 2

29 Mar 2012

5120-12-362-5359
Flat Tip Screwdriver

123625359
6152031: RNCC: 3 | RNVC: 2

5 Mar 2004

5120-12-178-2142
Elektron Auszieher

121782142
A1Z10157467: RNCC: 3 | RNVC: 2
10157467: RNCC: 5 | RNVC: 2
7565133523: RNCC: 5 | RNVC: 9
7565 133523: RNCC: 5 | RNVC: 9

26 Mar 1979

5120-12-384-8160
Farriers' Nail Puller

123848160
51.000.031: RNCC: 3 | RNVC: 2
51.000.031: RNCC: 5 | RNVC: 2

31 Mar 2011

5120-12-133-4590

5120-12-387-6847
Bearing And Bushing Inserter

123876847
F30378426: RNCC: 3 | RNVC: 2

24 Jan 2012

5120-12-154-1519

5120-12-381-8376
Socket Wrench Set

123818376
911.0751: RNCC: 3 | RNVC: 2
49387: RNCC: 6 | RNVC: 9
391413324807: RNCC: 6 | RNVC: 9

8 Apr 2010

5120-12-364-2913
Cross Tip Screwdriver

123642913
47360008-TCS: RNCC: 3 | RNVC: 2

8 Sep 2004

5120-12-380-4901
Workpiece Fixture

123804901
0061 900 0107: RNCC: 3 | RNVC: 2
SSP: RNCC: 5 | RNVC: 2
SSP: RNCC: 5 | RNVC: 2

3 Nov 2009

5120-12-356-9866
Montierdorn

123569866
2300002-268100.001: RNCC: 2 | RNVC: 2
9944336: RNCC: 3 | RNVC: 2
2300002-268100.001: RNCC: 5 | RNVC: 2

23 Apr 2002

5120-12-181-5082
Ein- Und Ausziehvor

121815082
131310: RNCC: 3 | RNVC: 2
181206: RNCC: 5 | RNVC: 2
91626997: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-123-4983
Body And Fender Repair Pick

121234983
031A355: RNCC: 3 | RNVC: 2
3030: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-325-8114
Lager- Und Einsatz

123258114
5870057010: RNCC: 3 | RNVC: 2
790511377: RNCC: 5 | RNVC: 2
5870 057 010: RNCC: 5 | RNVC: 9
5870057010: RNCC: 5 | RNVC: 9

12 Jul 1991

5120-12-148-3322
Mechanical Puller

121483322
ME3865034: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-368-1021
Socket Head Screw Key

123681021
43260015-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-321-8035
Hyd Einbauwerkzeug

123218035
40197-T600: RNCC: 3 | RNVC: 2
40197-T-600: RNCC: 5 | RNVC: 2

28 Jun 1990

5120-12-179-9707
Lasche

121799707
143200-1: RNCC: 3 | RNVC: 2
80.99622-0016: RNCC: 5 | RNVC: 2
80996220016: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-390-4220
Bearing And Bushing Inserter

123904220
F0097540: RNCC: 3 | RNVC: 2

12 Nov 2012

5120-12-321-7338
Ku Montierwerkzeug

123217338
0851 6257: RNCC: 3 | RNVC: 2
8516257: RNCC: 5 | RNVC: 2

20 Jun 1990

5120-12-195-3667
Verschlusz- Hebel

121953667
P896889: RNCC: 3 | RNVC: 2
P896889-407: RNCC: 5 | RNVC: 2
P-896889-405: RNCC: 5 | RNVC: 2
P-896889-407: RNCC: 5 | RNVC: 2
P896889-405: RNCC: 5 | RNVC: 2
MAGERD 1377: RNCC: 5 | RNVC: 9

15 Feb 1983

5120-12-172-2788
Schluessel

121722788
335929-9013.000: RNCC: 3 | RNVC: 2
1240-12000W1: RNCC: 5 | RNVC: 2
1240-12000W1: RNCC: 5 | RNVC: 2
335929-9013.000: RNCC: 5 | RNVC: 9

10 Jan 1978

5120-12-350-4822
Fuehrungs- Platte

123504822
26-21C1360G003P39: RNCC: 3 | RNVC: 2

5 Apr 2000

5120-12-179-9994
Lamp Extractor

121799994
EF 106.8585: RNCC: 3 | RNVC: 2
EF1068585: RNCC: 3 | RNVC: 2
106-8585-00: RNCC: 5 | RNVC: 2
424102-14-4-2: RNCC: 5 | RNVC: 2

17 Aug 1979

5120-12-370-3802
Socket Wrench Screwdriver Attachment Set

123703802
ES54/54KK: RNCC: 3 | RNVC: 2
96838114: RNCC: 5 | RNVC: 2

31 Oct 2006

5120-12-316-3066
Socket Head Screw Key

123163066
42901706: RNCC: 3 | RNVC: 2
LN-6MMBP: RNCC: 5 | RNVC: 2

9 Jan 1989

5120-12-308-0587
Wire Twister Pliers

123080587
NO PRIMARY REF 12-308-0587: RNCC: 3 | RNVC: 2
1823238: RNCC: 5 | RNVC: 9
182323: RNCC: 5 | RNVC: 9
2855DF: RNCC: 5 | RNVC: 9
2855F-250: RNCC: 5 | RNVC: 9
2855F250: RNCC: 5 | RNVC: 9
134392: RNCC: 5 | RNVC: 9

26 Aug 1986

5120-12-328-6980
Mechanical Puller Attachment

123286980
F6341641: RNCC: 3 | RNVC: 2

16 Jun 1992

5120-12-150-0214
Montagevorrichtung

121500214
490160: RNCC: 2 | RNVC: 2
490160: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-373-3766
Eindrueckwerkzeug

123733766
L133M6503101: RNCC: 3 | RNVC: 2

26 Oct 2007

5120-12-338-3191
Hand Hydraulic Jack

123383191
47.17: RNCC: 3 | RNVC: 2
47.17: RNCC: 5 | RNVC: 2

22 Jun 1995

5120-12-378-5020
Mechanical Puller

123785020
U32935: RNCC: 3 | RNVC: 2

15 Apr 2009

5120-12-135-4073
Wrecking Bar

121354073
022F013B: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-364-6783
Socket Wrench Handle

123646783
13060012-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-310-3073
Socket Head Screw Key

123103073
1000025-810850: RNCC: 3 | RNVC: 2

7 May 1987

5120-12-023-1453

5120-12-126-5490
Abzieher Haken

121265490
3035892133: RNCC: 3 | RNVC: 2
3035892133: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-390-5170
Pin Inserter

123905170
107188: RNCC: 3 | RNVC: 2

19 Nov 2012

5120-12-318-3440
Hand Hammer

123183440
5077.02.0: RNCC: 3 | RNVC: 2
59305-2-0: RNCC: 5 | RNVC: 2

5 Jul 1989

5120-12-327-1163
Lifting Pneumatic Bag

123271163
131 01 000: RNCC: 3 | RNVC: 9
13101000: RNCC: 5 | RNVC: 2
TYP V10: RNCC: 5 | RNVC: 9

3 Dec 1991

5120-12-363-9039
Bearing And Bushing Inserter

123639039
T670P5001251: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-020-5577

5120-12-126-1521

5120-12-120-5786

5120-12-132-4300
Ausbauvorrichtung

121324300
1216 7825: RNCC: 3 | RNVC: 2
12167825: RNCC: 5 | RNVC: 9
6-420-0-690-003-6: RNCC: 5 | RNVC: 9
6.420.0.690.003.6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-130-8110
Drive Pin Punch

121308110
TL5120-0024-E: RNCC: 2 | RNVC: 2
NM253-06: RNCC: 3 | RNVC: 2
TL5120-0024ITEME: RNCC: 5 | RNVC: 2
5120-0024ITEME: RNCC: 5 | RNVC: 9
5120-024ITEME: RNCC: 5 | RNVC: 9
NM253-06: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-9334
Ejecti Guide Plate

123889334
320 005 50: RNCC: 3 | RNVC: 2
80996020180: RNCC: 5 | RNVC: 2
80.99602-0180: RNCC: 5 | RNVC: 2

8 May 2012

5120-12-121-1196
Swivel Knob Jeweler's Screwdriver

121211196
DIN8320-A0,11X0,5: RNCC: 2 | RNVC: 2
547: RNCC: 3 | RNVC: 2
TVA5120-2-263-039: RNCC: 5 | RNVC: 1
TVA5120-2-263-039-1.1.1: RNCC: 5 | RNVC: 2
A0-12X0-6DIN8320: RNCC: 5 | RNVC: 9
DIN8320-A0,12X0,6: RNCC: 5 | RNVC: 9
A0,12X0,6DIN8320: RNCC: 5 | RNVC: 9
DIN8320A0,12X0,6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-131-4340
Box Wrench

121314340
003521017000: RNCC: 3 | RNVC: 2
DIN3521-17: RNCC: 5 | RNVC: 2
DIN3521-17: RNCC: 5 | RNVC: 2
17DIN3521: RNCC: 5 | RNVC: 2
DIN3521-17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-2298
Seal Inserter

121812298
312589001500: RNCC: 3 | RNVC: 2
3125890015/00: RNCC: 5 | RNVC: 2
0730582: RNCC: 5 | RNVC: 2
HT27/5891/02: RNCC: 5 | RNVC: 9

5 Nov 1979

5120-12-126-1793
Drill Guide

121261793
TL5120-0052-130A: RNCC: 2 | RNVC: 2
1418G: RNCC: 3 | RNVC: 2
104056: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5064

5120-12-390-1029
Socket Wrench Set

123901029
096512190: RNCC: 3 | RNVC: 2

4 Oct 2012

5120-12-316-6817
Bearing And Bushing Inserter

123166817
0853 2343: RNCC: 3 | RNVC: 2
8532343: RNCC: 5 | RNVC: 2

1 Feb 1989

5120-12-363-8362
Bearing And Bushing Inserter And Remover

123638362
T671P5001111: RNCC: 3 | RNVC: 2

29 Jul 2004

5120-12-311-9365
Torque Wrench Adapter

123119365
KDEP2988: RNCC: 3 | RNVC: 2
KDEP2988: RNCC: 5 | RNVC: 2

30 Oct 1987

5120-12-342-0485
Cross Tip Screwdriver

123420485
4722ESD PH2X100: RNCC: 3 | RNVC: 2

4 Dec 1996

5120-12-139-8378
Box Wrench

121398378
000589060300: RNCC: 3 | RNVC: 2
000589060300: RNCC: 3 | RNVC: 2
0005890603: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-194-0842
Torque Wrench Adapter

121940842
TL5120-0086-780: RNCC: 2 | RNVC: 2
65790-2-36: RNCC: 5 | RNVC: 9
21/DCA-36: RNCC: 5 | RNVC: 9
732/40 36: RNCC: 5 | RNVC: 9
6264110021: RNCC: 5 | RNVC: 9
6630D-36: RNCC: 5 | RNVC: 9
732/40-36: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-152-5605
Torque Wrench Adapter

121525605
20-2-17: RNCC: 3 | RNVC: 2
169125109: RNCC: 5 | RNVC: 2
20-17-2: RNCC: 5 | RNVC: 2
7101-86-31-04: RNCC: 5 | RNVC: 9
7101-86-31.04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-382-7061
Dispenser Proportioner Nozzle

123827061
DS-2729-9049-2: RNCC: 3 | RNVC: 2

28 Jul 2010

5120-12-384-3409
Mecha Ejector Tool

123843409
Y4341042: RNCC: 3 | RNVC: 2

15 Feb 2011

5120-12-390-2677
Seal Inserter

123902677
F30378560: RNCC: 3 | RNVC: 2

24 Oct 2012

5120-12-389-2686
Spanner Wrench

123892686
642589004000: RNCC: 3 | RNVC: 2
642589004000: RNCC: 5 | RNVC: 2

14 Jun 2012

5120-12-384-8558
Mechanical Puller

123848558
F30372272: RNCC: 3 | RNVC: 2

5 Apr 2011

5120-12-387-3639
Torque Wrench Adapter

123873639
249033: RNCC: 3 | RNVC: 2

2 Dec 2011

5120-12-368-9532
Pliers

123689532
03 02 160: RNCC: 3 | RNVC: 2
00.11.86.22: RNCC: 5 | RNVC: 2

9 May 2006

5120-12-376-6525
Workpiece Fixture

123766525
BAN700: RNCC: 3 | RNVC: 2

24 Oct 2008

5120-12-145-4280
Screwdriver And Wrench Assembly

121454280
510105: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-370-2613
Socket Wrench Set

123702613
96830051: RNCC: 3 | RNVC: 2

17 Oct 2006

5120-12-133-4572

5120-12-123-5427
Box Wrench

121235427
DIN837-B41X46: RNCC: 2 | RNVC: 2
4-41X46: RNCC: 3 | RNVC: 2
41X46DIN837: RNCC: 5 | RNVC: 2
DIN837-41X46: RNCC: 5 | RNVC: 2
TVA5120-2-263-032.1.1.34: RNCC: 5 | RNVC: 2
41X46DIN837GALNI8: RNCC: 5 | RNVC: 9
237272: RNCC: 5 | RNVC: 9
4-41X46: RNCC: 5 | RNVC: 9
4-41X46: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-2528
Rohrbieger Dorn

123052528
5-1/40-035-000-21412: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-369-0536
Schluessel

123690536
53.1559.019.00: RNCC: 3 | RNVC: 2

17 May 2006

5120-12-364-6771
Drive Pin Punch

123646771
70060007-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-345-3729
Montierhuelse

123453729
F6 342705: RNCC: 3 | RNVC: 2

10 Mar 1998

5120-12-388-5492
Mounting Punch

123885492
030.263: RNCC: 3 | RNVC: 2

29 Mar 2012

5120-12-185-6467
Electronic Equipment Alignment Tool

121856467
2-237: RNCC: 3 | RNVC: 2

21 Oct 1980

5120-12-364-5644
Open End Wrench

123645644
40060808-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-132-1213
Socket Wrench

121321213
DIN904-6: RNCC: 2 | RNVC: 2
1170-6: RNCC: 3 | RNVC: 2
6DIN904: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-180-7967
Socket Head Screw Key

121807967
DIN905-9: RNCC: 2 | RNVC: 2
3015/9: RNCC: 3 | RNVC: 2
9DIN905: RNCC: 5 | RNVC: 2

4 Oct 1979

5120-12-364-5512
Flat Tip Screwdriver

123645512
48202055-TCS: RNCC: 3 | RNVC: 2

8 Oct 2004

5120-12-332-9807
Ge Montierwerkzeug

123329807
321589001400: RNCC: 3 | RNVC: 2

18 Oct 1993

5120-12-326-0180
Spanner Wrench

123260180
126589001600: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-335-0536
Seal Inserter

123350536
F30276067: RNCC: 3 | RNVC: 2

18 Jul 1994

5120-12-363-8720
Bearing And Bushing Inserter

123638720
T670P5001213: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-153-2817
Open End Wrench

121532817
CH277-19NM: RNCC: 3 | RNVC: 2
1201 9496: RNCC: 5 | RNVC: 2
CH277-19NM: RNCC: 5 | RNVC: 9
A26-50-65: RNCC: 5 | RNVC: 9
A26-50-65-3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5434
Socket Wrench

121235434
28CU: RNCC: 3 | RNVC: 2
710: RNCC: 3 | RNVC: 2
3550001: RNCC: 3 | RNVC: 2
610-31: RNCC: 3 | RNVC: 2
1925210004: RNCC: 5 | RNVC: 2
06100031: RNCC: 5 | RNVC: 2
29C-N: RNCC: 5 | RNVC: 9
29C-N: RNCC: 5 | RNVC: 9
28C: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-2433
Mechanical Puller

123122433
788-30: RNCC: 3 | RNVC: 2

8 Dec 1987

5120-12-172-1853
Spanner Wrench

121721853
903-812-0085: RNCC: 3 | RNVC: 2

3 Jan 1978

5120-12-150-2737
Ritzel Gegenhalter

121502737
23176-264370-00-0: RNCC: 2 | RNVC: 2
23176-264370.00.0: RNCC: 2 | RNVC: 2
23176-264370-00-0: RNCC: 5 | RNVC: 2
23176-264370-00-0: RNCC: 5 | RNVC: 2
23176-264370.00.0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-183-7272
Hand Terminal Crimping Tool

121837272
30460UND30461: RNCC: 3 | RNVC: 2

15 May 1980

5120-12-126-2530

5120-12-364-3153
Socket Wrench Handle

123643153
12060010-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-387-2580
Mounting Sleeve

123872580
034.100: RNCC: 3 | RNVC: 2

21 Nov 2011

5120-12-041-2707

5120-12-090-1821

5120-12-070-0213

5120-12-314-6238
Open End Wrench

123146238
0331 3825: RNCC: 3 | RNVC: 2

22 Jul 1988

5120-12-314-1733
Bearing And Bushing Inserter

123141733
0852 8767: RNCC: 3 | RNVC: 2
8528767: RNCC: 5 | RNVC: 2

15 Jun 1988

5120-12-340-7858
Plier Clamp

123407858
GRZRO: RNCC: 3 | RNVC: 2

12 Jun 1996

5120-12-372-2759
Mechanical Puller Forcing Screw

123722759
614160: RNCC: 3 | RNVC: 2

3 Jul 2007

5120-12-386-1696
Preformed Packing Inserter

123861696
510 1526: RNCC: 3 | RNVC: 2

15 Aug 2011

5120-12-150-5718
Face Spanner Wrench Socket

121505718
837589020700: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-342-0115
Bearing And Bushing Inserter

123420115
112720: RNCC: 3 | RNVC: 2
112720: RNCC: 5 | RNVC: 2
0112720: RNCC: 5 | RNVC: 9

29 Nov 1996

5120-12-123-5513

5120-12-144-0632
Einstell- Dorn

121440632
2895-027: RNCC: 3 | RNVC: 2
2895027: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-329-4317
Spanner Wrench

123294317
081-140171-000-0: RNCC: 2 | RNVC: 2
081-140171-000-0: RNCC: 3 | RNVC: 2

19 Aug 1992

5120-12-316-1050
Schluessel

123161050
CH 6754: RNCC: 3 | RNVC: 2
CH06754: RNCC: 3 | RNVC: 2
CH 6754: RNCC: 5 | RNVC: 2
CH06754: RNCC: 5 | RNVC: 2
CH6754: RNCC: 5 | RNVC: 2
CH06754: RNCC: 5 | RNVC: 9

22 Dec 1988

5120-12-373-8902
Inspection Mirror

123738902
321: RNCC: 3 | RNVC: 2

17 Dec 2007

5120-12-377-4705
Screwdriver Bit Set And Handle

123774705
08065109025: RNCC: 3 | RNVC: 2
08.06510.9025: RNCC: 3 | RNVC: 9

19 Jan 2009

5120-12-314-6076
Seal Inserter

123146076
5111808: RNCC: 3 | RNVC: 2
511180: RNCC: 5 | RNVC: 9

21 Jul 1988

5120-12-384-3955
Spring Inserter And Remover

123843955
F6783833: RNCC: 3 | RNVC: 2

21 Feb 2011

5120-12-127-9023

5120-12-334-2717
Mecha Schraubstock

5120-12-126-4946
Mechanical Puller

121264946
23: RNCC: 3 | RNVC: 2
88310: RNCC: 3 | RNVC: 2
88430: RNCC: 3 | RNVC: 2
108300: RNCC: 5 | RNVC: 9
4572: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-182-7781
Rohr- Zange

121827781
53434020: RNCC: 3 | RNVC: 9

25 Feb 1980

5120-12-334-6153
Wire Twister Pliers

123346153
05L7982: RNCC: 3 | RNVC: 2

30 May 1994

5120-12-320-4994
Crowbar

123204994
154016: RNCC: 3 | RNVC: 2
154016: RNCC: 5 | RNVC: 9

19 Jan 1990

5120-12-126-4681
Electronic Equipment Alignment Tool

121264681
NO PRIMARY REF 12-126-4681: RNCC: 3 | RNVC: 2
108691: RNCC: 5 | RNVC: 9
5509-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-3184
Pratze

121773184
23290-268090.001: RNCC: 2 | RNVC: 2
23290-268090.001: RNCC: 3 | RNVC: 2
V4940103301: RNCC: 3 | RNVC: 2
23290-268090-001: RNCC: 5 | RNVC: 9
23290-268090-001: RNCC: 5 | RNVC: 9
23290-268090.001: RNCC: 5 | RNVC: 9

29 Jan 1979

5120-12-195-1807
Box Wrench

121951807
DIN7447-10: RNCC: 2 | RNVC: 2
161410: RNCC: 3 | RNVC: 2
61740VDE10: RNCC: 3 | RNVC: 2
980110: RNCC: 3 | RNVC: 2
2VDE10: RNCC: 5 | RNVC: 9
61740VDE10: RNCC: 5 | RNVC: 9
9517-10: RNCC: 5 | RNVC: 9

20 Jan 1983

5120-12-311-9739
Open End Wrench

123119739
3114-50: RNCC: 3 | RNVC: 2
790015277: RNCC: 5 | RNVC: 2
61280-50: RNCC: 5 | RNVC: 2
612800-50: RNCC: 5 | RNVC: 2
667137: RNCC: 5 | RNVC: 2

5 Nov 1987

5120-12-176-1323
Socket Head Screw Key

121761323
C1997M6: RNCC: 3 | RNVC: 2
148512: RNCC: 5 | RNVC: 2
907806: RNCC: 5 | RNVC: 9
C1997M6MM: RNCC: 6 | RNVC: 9

9 Nov 1978

5120-12-021-2675

5120-12-174-9541
Hole Sheet Metal Holder

121749541
2072K50: RNCC: 3 | RNVC: 2

9 Aug 1978

5120-12-312-2028
Preformed Packing Inserter

123122028
105-45041W14: RNCC: 3 | RNVC: 2

2 Dec 1987

5120-12-321-1268
Mater Saug- Griff

123211268
54.1035.650.02LV: RNCC: 3 | RNVC: 2

30 Mar 1990

5120-12-354-9999
Hand Screw Jack

123549999
209621: RNCC: 3 | RNVC: 2

18 Sep 2001

5120-12-342-0012
Mechanical Puller

123420012
008560: RNCC: 3 | RNVC: 2
008560: RNCC: 5 | RNVC: 2
008560: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-12-129-8222

5120-12-369-4640
Wrench Kit

123694640
ZG7300G011: RNCC: 3 | RNVC: 2
300021601: RNCC: 5 | RNVC: 2

6 Jul 2006

5120-12-146-5128
Mechanical Puller

121465128
1X56093477: RNCC: 3 | RNVC: 2
83091436072: RNCC: 5 | RNVC: 2
0535403: RNCC: 5 | RNVC: 2
V93477: RNCC: 5 | RNVC: 9
535403: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-4907
Hand Tube Flaring Tool

121264907
NO PRIMARY REF 12-126-4907: RNCC: 3 | RNVC: 2
163A: RNCC: 5 | RNVC: 9
96634102: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-301-4553
Fixed Open End Wrench Set

123014553
NO PRIMARY REF 12-301-4553: RNCC: 3 | RNVC: 2
1930AM8: RNCC: 5 | RNVC: 9

16 Oct 1984

5120-12-177-3656
Socket Wrench

121773656
0676020000: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-366-2670
Flat Tip Screwdriver

123662670
1J0 012 255: RNCC: 3 | RNVC: 2

1 Apr 2005

5120-12-343-1051
Swivel Knob Jeweler's Screwdriver

123431051
242 105 90: RNCC: 3 | RNVC: 2

29 Apr 1997

5120-12-130-3393

5120-12-381-7766
Mounting Punch

123817766
F30379782: RNCC: 3 | RNVC: 2

30 Mar 2010

5120-12-377-4369
Pull And Press Tool

123774369
F6374263: RNCC: 3 | RNVC: 2
F6374263: RNCC: 5 | RNVC: 2

15 Jan 2009

5120-12-365-9728
Socket Head Screw Key

123659728
43150002-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-385-3545
Pin Inserter

123853545
F6374273: RNCC: 3 | RNVC: 2

25 May 2011

5120-12-123-4991
Hand Rivet Set

121234991
30673: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-194-0838
Torque Wrench Adapter

121940838
TL5120-0086-720: RNCC: 2 | RNVC: 2
732/40-22: RNCC: 3 | RNVC: 2
58224022: RNCC: 5 | RNVC: 2
7852-8 22: RNCC: 5 | RNVC: 9
21/DCA-22: RNCC: 5 | RNVC: 9
6630D-22: RNCC: 5 | RNVC: 9
R51336: RNCC: 5 | RNVC: 9
7218-22: RNCC: 5 | RNVC: 9
7693980: RNCC: 5 | RNVC: 9
6264110016: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-171-3436
Flat Tip Screwdriver

121713436
08032: RNCC: 3 | RNVC: 9
335-0,6X4,5: RNCC: 5 | RNVC: 9
131553: RNCC: 5 | RNVC: 9
8000N-0-6-4-5-150: RNCC: 5 | RNVC: 9
8000N0-6X4-5X150: RNCC: 5 | RNVC: 9

30 Sep 1977

5120-12-133-5944
Open End Wrench

121335944
NO PRIMARY REF 12-133-5944: RNCC: 3 | RNVC: 2
610A48: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-196-1480
Montierhuelse

121961480
EV4-853: RNCC: 3 | RNVC: 2
EV4-853: RNCC: 5 | RNVC: 9

7 Jun 1983

5120-12-337-0862
Eindrueckwerkzeug

123370862
S180ZZ26000-000: RNCC: 3 | RNVC: 2

18 Jan 1995

5120-12-040-0063

5120-12-182-5432
Spanner Wrench

121825432
105-45051W2: RNCC: 3 | RNVC: 2

8 Feb 1980

5120-12-181-8788
Socket Wrench Set

121818788
850: RNCC: 3 | RNVC: 2
42580: RNCC: 5 | RNVC: 2
4485350001: RNCC: 5 | RNVC: 2

21 Dec 1979

5120-12-151-6551
Halter

121516551
1004V4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-157-3292
Socket Wrench

121573292
05892: RNCC: 3 | RNVC: 2
05892: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-2557
Pliers

121262557
DIN5236-A200SGERAUHT: RNCC: 2 | RNVC: 9
2477A: RNCC: 3 | RNVC: 2
2477A: RNCC: 3 | RNVC: 2
2477A: RNCC: 5 | RNVC: 2
999: RNCC: 5 | RNVC: 9
2477A: RNCC: 5 | RNVC: 9
338A: RNCC: 5 | RNVC: 9
106381: RNCC: 5 | RNVC: 9
573A408B: RNCC: 5 | RNVC: 9
A200SDIN5236GERAUHT: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-374-4209
Wor Pressure Piece

123744209
2875MP95-04-1AY: RNCC: 3 | RNVC: 2

15 Feb 2008

5120-12-360-3229
Hand Screw Starter

123603229
05005110001: RNCC: 3 | RNVC: 2
186PZ1: RNCC: 5 | RNVC: 2
005110: RNCC: 5 | RNVC: 9

8 May 2003

5120-12-369-0283
Trowel

123690283
703 120 00: RNCC: 3 | RNVC: 2
02.33.36.56: RNCC: 5 | RNVC: 2

15 May 2006

5120-12-172-9538
Socket Head Screw Key

121729538
1X56 122 391: RNCC: 3 | RNVC: 2
1X56122391: RNCC: 5 | RNVC: 2

6 Mar 1978

5120-12-185-0478

5120-12-137-8264

5120-12-311-6793
Driftpin

123116793
80996170020: RNCC: 3 | RNVC: 2
80.99617.0020: RNCC: 5 | RNVC: 2

6 Oct 1987

5120-12-196-7385
Mechanical Puller

121967385
1X56126464: RNCC: 3 | RNVC: 2
1X56126464: RNCC: 5 | RNVC: 2
0535713: RNCC: 5 | RNVC: 2
535713: RNCC: 5 | RNVC: 9

9 Aug 1983

5120-12-129-8793
Spannvorrichtung

121298793
0681200007: RNCC: 3 | RNVC: 2
EF2720: RNCC: 5 | RNVC: 2
EF2720: RNCC: 5 | RNVC: 9
0681200007: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-392-9110
Spanner Wrench Set

123929110
71016541: RNCC: 3 | RNVC: 2

23 Jul 2013

5120-12-131-6368
Socket Wrench

121316368
AWENTW2544A57: RNCC: 3 | RNVC: 2
AWENTW2544A57: RNCC: 5 | RNVC: 2
AWENTW2544A57: RNCC: 5 | RNVC: 2
AWENTW2544A57: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-319-9811
Rivet Bucking Bar

123199811
690: RNCC: 3 | RNVC: 2

24 Nov 1989

5120-12-373-9313
Pruef- Spiegelsatz

123739313
060031: RNCC: 3 | RNVC: 2

19 Dec 2007

5120-12-305-2509
Bearing And Bushing Inserter

123052509
6796946W11: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-305-2550
Socket Head Screw Key

123052550
334-65: RNCC: 3 | RNVC: 2
GAW1610: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-126-1854
Tool Handle Wedge

121261854
KRALLE9: RNCC: 3 | RNVC: 2
KRALLE9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-026-1717

5120-12-314-6726
Rack Bar Jack

123146726
2996.51.70: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-12-373-4936
Socket Wrench Crowfoot Attachment

123734936
02211018: RNCC: 3 | RNVC: 2

8 Nov 2007

5120-12-315-3741
Elektron Auszieher

123153741
2339-100001.002.0: RNCC: 2 | RNVC: 2
2339-100001.002.0: RNCC: 3 | RNVC: 2

18 Oct 1988

5120-12-341-6554
Socket Head Screw Key

123416554
05022079001: RNCC: 3 | RNVC: 2
10767A-1,3/0,050: RNCC: 3 | RNVC: 2
43570130: RNCC: 5 | RNVC: 2
950PKL-0,05: RNCC: 5 | RNVC: 2

11 Oct 1996

5120-12-164-8975
Abziehplatte

121648975
23305-264110.01.0: RNCC: 2 | RNVC: 2
23305-264110-01-0: RNCC: 5 | RNVC: 2
23305-264110-01-0: RNCC: 5 | RNVC: 9
23305-264110.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-386-7852
Hydraulic Adapter

123867852
84187/2660-04: RNCC: 3 | RNVC: 2

29 Sep 2011

5120-12-041-6027

5120-12-192-2755
Electron Tube Extractor

121922755
5181021: RNCC: 3 | RNVC: 2

1 Jan 2000

5120-12-368-1104
Cross Tip Screwdriver

123681104
47360006-TCS: RNCC: 3 | RNVC: 2

8 Dec 2005

5120-12-317-4336
Cross Tip Screwdriver

123174336
08740: RNCC: 3 | RNVC: 9

6 Apr 1989

5120-12-196-5867
Box Wrench

121965867
4561: RNCC: 3 | RNVC: 2
5713650004: RNCC: 5 | RNVC: 2
13258: RNCC: 5 | RNVC: 2
2598: RNCC: 5 | RNVC: 9

20 Jul 1983

5120-12-363-9538
Bearing And Bushing Inserter

123639538
T670P5001297: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-328-0834
Socket Wrench

123280834
5655801: RNCC: 2 | RNVC: 2
5655801: RNCC: 3 | RNVC: 2

3 Apr 1992

5120-12-023-1402

5120-12-382-1920
Socket Head Screw Key

123821920
0250030S: RNCC: 3 | RNVC: 2

20 May 2010

5120-12-347-1871
Montierdorn

123471871
0851 6799: RNCC: 3 | RNVC: 2

10 Nov 1998

5120-12-177-6325
Montagevorrichtung

121776325
331600: RNCC: 3 | RNVC: 9

9 Feb 1979

5120-12-383-6824
Ku Montierwerkzeug

123836824
1X56.136.559: RNCC: 3 | RNVC: 2

24 Nov 2010

5120-12-024-3341

5120-12-376-2673
Joint Breaking Wedge

123762673
1X56 137 410: RNCC: 3 | RNVC: 2

3 Sep 2008

5120-12-374-4243
Socket Head Screw Key

123744243
2875WKSK: RNCC: 3 | RNVC: 2

15 Feb 2008

5120-12-174-9875
Hand Screw Starter

121749875
8065N1B: RNCC: 3 | RNVC: 2
52560103: RNCC: 3 | RNVC: 9
1732: RNCC: 3 | RNVC: 9
130007: RNCC: 5 | RNVC: 2
30555: RNCC: 5 | RNVC: 9

15 Aug 1978

5120-12-336-6249
Fe Montierwerkzeug

123366249
KD5072-0000: RNCC: 3 | RNVC: 2
5072-0000: RNCC: 5 | RNVC: 2

1 Dec 1994

5120-12-378-1235
Socket Wrench

123781235
0102: RNCC: 3 | RNVC: 2

13 Mar 2009

5120-12-324-7593
Bearing And Bushing Inserter

123247593
19.0146.190.1002: RNCC: 3 | RNVC: 2
19.0146.190.1002: RNCC: 5 | RNVC: 9

21 Mar 1991

5120-12-357-7727
Pliers

123577727
791/2: RNCC: 3 | RNVC: 2

22 Jul 2002

5120-12-193-7622
Mechanical Puller

121937622
318 589 00 35 00: RNCC: 3 | RNVC: 2
318589003500: RNCC: 3 | RNVC: 2

30 Aug 1982

5120-12-157-6430
Torque Wrench Adapter

121576430
20-0-17: RNCC: 3 | RNVC: 2
20-17-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-174-5088
Combination Box And Open End Wrench

121745088
1000-19: RNCC: 3 | RNVC: 2
185-19: RNCC: 3 | RNVC: 2
DIN3113-A19: RNCC: 5 | RNVC: 2
DIN3113-AK19: RNCC: 5 | RNVC: 2
C 5703 817 DC: RNCC: 5 | RNVC: 2
61 350/19: RNCC: 5 | RNVC: 2
AK19DIN3113: RNCC: 5 | RNVC: 2
01850014: RNCC: 5 | RNVC: 2
C 5703 817 DC: RNCC: 5 | RNVC: 2
200C19: RNCC: 5 | RNVC: 9

3 Jul 1978

5120-12-150-2738
Kupplu Druckplatte

121502738
23176-264220-00-0: RNCC: 2 | RNVC: 2
23176-264220.00.0: RNCC: 2 | RNVC: 2
23176-264220-00-0: RNCC: 5 | RNVC: 2
23176-264220.00.0: RNCC: 5 | RNVC: 2
23176-264220-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-023-2577

5120-12-312-8111
Torque Wrench

123128111
116589022100: RNCC: 3 | RNVC: 2
116 589 02 21 00: RNCC: 5 | RNVC: 2

10 Feb 1988

5120-12-133-3710

5120-12-323-7579
Spanner Wrench

123237579
99350114: RNCC: 3 | RNVC: 2
350 114: RNCC: 5 | RNVC: 2

13 Dec 1990

5120-12-364-3484
Hand Hammer

123643484
70110004-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-363-9544
Bearing And Bushing Inserter

123639544
T671P5002106: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-164-8783
Open End Box Wrench

121648783
1949M14X15: RNCC: 3 | RNVC: 2
00.27.89.73: RNCC: 5 | RNVC: 2
130454: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-129-9518
Spanner Wrench

121299518
42094-142: RNCC: 2 | RNVC: 2
R17829: RNCC: 3 | RNVC: 2
4060-956: RNCC: 5 | RNVC: 2
4060956: RNCC: 5 | RNVC: 2
R17829: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-0485
Hand Screw Jack

121740485
183011031A: RNCC: 3 | RNVC: 2

6 Jun 1978

5120-12-180-6134
Arretierhebel

121806134
1X56137056: RNCC: 3 | RNVC: 2

21 Sep 1979

5120-12-198-6073
Mechanical Puller Adapter

121986073
5870610002: RNCC: 3 | RNVC: 2
026091: RNCC: 5 | RNVC: 2
5870610002: RNCC: 5 | RNVC: 9

14 Feb 1984

5120-12-306-1690
Socket Head Screw Key

123061690
9039450: RNCC: 3 | RNVC: 2

3 Feb 1986

5120-12-186-7354
Schlagbuchse

121867354
99374325: RNCC: 3 | RNVC: 2
412220: RNCC: 5 | RNVC: 9
412220: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-126-5427
Gleitsch Auszieher

121265427
1875890733: RNCC: 3 | RNVC: 2
1875890733: RNCC: 3 | RNVC: 9
187589073300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-311-6792
Bearing And Bushing Inserter

123116792
80996170017: RNCC: 3 | RNVC: 2
80.99617.0017: RNCC: 5 | RNVC: 2
V839: RNCC: 5 | RNVC: 2

6 Oct 1987

5120-12-388-4835
Ejecti Guide Plate

123884835
1X56 137 152: RNCC: 3 | RNVC: 2

26 Mar 2012

5120-12-168-1497
Screw Thread Insert Inserter

121681497
01500105000: RNCC: 3 | RNVC: 2
01532050000: RNCC: 5 | RNVC: 9
01565050000: RNCC: 5 | RNVC: 9

23 Feb 1977

5120-12-383-6967
Mechanical Puller

123836967
1X56.122.319: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-12-139-2476
Spanner Wrench

121392476
023M09200: RNCC: 3 | RNVC: 2
VM71383: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-314-0464
Socket Wrench Socket

123140464
5187021: RNCC: 3 | RNVC: 2

1 Jun 1988

5120-12-173-1657
Battery Filler Cap Wrench

121731657
92913804810: RNCC: 3 | RNVC: 2
003.526.030.111: RNCC: 5 | RNVC: 9
9291380468: RNCC: 5 | RNVC: 9

22 Mar 1978

5120-12-343-8662
Hand Hammer

123438662
2152: RNCC: 3 | RNVC: 2
02152000000: RNCC: 5 | RNVC: 2

7 Aug 1997

5120-12-363-5330
Socket Wrench Handle

123635330
154373: RNCC: 3 | RNVC: 2
160-160MM: RNCC: 5 | RNVC: 2

25 Jun 2004

5120-12-347-3260
Dreh Winkelscheibe

123473260
21-540: RNCC: 3 | RNVC: 2

26 Nov 1998

5120-12-181-1321
Socket Wrench Attachment Universal Joint

121811321
1080: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-126-3350

5120-12-311-9553
Mechanical Puller Attachment

123119553
63-436: RNCC: 3 | RNVC: 2
000-941-91-42: RNCC: 5 | RNVC: 2
000.941.91.42: RNCC: 5 | RNVC: 2
0009419142: RNCC: 5 | RNVC: 2

5 Nov 1987

5120-12-383-6931
Mechanical Puller

123836931
1X56.095.068: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-12-365-1140
Bearing And Bushing Inserter

123651140
H14831007: RNCC: 3 | RNVC: 2

30 Nov 2004

5120-12-385-5519
Driftpin

123855519
F30451103: RNCC: 3 | RNVC: 2

15 Jun 2011

5120-12-358-1547
Socket Wrench Set

123581547
9651132: RNCC: 3 | RNVC: 2
965 11 32: RNCC: 5 | RNVC: 2

19 Sep 2002

5120-12-139-2537
Abziehvorrichtung

121392537
006M04300: RNCC: 3 | RNVC: 2
VM75315: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-176-6869
Face Spanner Wrench Socket

121766869
322589000900: RNCC: 3 | RNVC: 2

13 Dec 1978

5120-12-332-7516
Mater Saug- Griff

123327516
600.1: RNCC: 3 | RNVC: 2
000000-0103.256: RNCC: 5 | RNVC: 2

15 Sep 1993

5120-12-348-3847
Torque Wrench

123483847
000589109901: RNCC: 3 | RNVC: 2

14 Jun 1999

5120-12-337-8381
Leveling-Support Jack

123378381
SH0.090.002.103: RNCC: 3 | RNVC: 2

20 Apr 1995

5120-12-120-6947

5120-12-382-6910
Torque Wrench Adapter

123826910
HU26895: RNCC: 3 | RNVC: 2

26 Jul 2010

5120-12-335-3145
Drift Punch

123353145
0852 1505: RNCC: 3 | RNVC: 2
8521505: RNCC: 5 | RNVC: 2

9 Aug 1994

5120-12-197-1100
Western Pattern Scoop

121971100
61889: RNCC: 3 | RNVC: 2

21 Sep 1983

5120-12-185-2546
Socket Wrench

121852546
DIN3112-30A: RNCC: 2 | RNVC: 2
0991069: RNCC: 5 | RNVC: 2
30ADIN3112: RNCC: 5 | RNVC: 2
DIN3112-30: RNCC: 5 | RNVC: 9
DIN3112-30-A: RNCC: 5 | RNVC: 9

25 Sep 1980

5120-12-157-0273
Socket Head Screw Key

121570273
NO PRIMARY REF 12-157-0273: RNCC: 3 | RNVC: 2
954-1-8: RNCC: 5 | RNVC: 9
44903: RNCC: 5 | RNVC: 9
106005: RNCC: 5 | RNVC: 9
1997ZB1-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-7348
Socket Wrench

121277348
0616-007-16U3-004: RNCC: 3 | RNVC: 2
616-7-16U3-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-7569
Spanner Wrench

121467569
25704-360400-01-0: RNCC: 3 | RNVC: 2
02168: RNCC: 3 | RNVC: 2
25704-360400.01.0: RNCC: 3 | RNVC: 2
02168: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-351-8083
Pliers

123518083
W/200-133264/15: RNCC: 3 | RNVC: 2

28 Aug 2000

5120-12-129-3312
Open End Wrench

121293312
039721: RNCC: 3 | RNVC: 2
TVA5120-2-263-028: RNCC: 5 | RNVC: 1
TVA5120-2-263-028-1.1.36: RNCC: 5 | RNVC: 2
6-1-2X9-16: RNCC: 5 | RNVC: 9
227714: RNCC: 5 | RNVC: 9
6-1-2X9-16: RNCC: 5 | RNVC: 9
03680: RNCC: 5 | RNVC: 9
450W1/2X9/16: RNCC: 5 | RNVC: 9
450WV1/2X9/16: RNCC: 5 | RNVC: 9
10E1/2X9/16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-1615
Swivel Knob Jeweler's Screwdriver

123121615
2025/0-0,15X0,6: RNCC: 3 | RNVC: 2
DIN8320-B0,15X0,6: RNCC: 5 | RNVC: 9

27 Nov 1987

5120-12-155-9530
Electron Tube Extractor

121559530
NM339-01: RNCC: 3 | RNVC: 2
NM339-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-153-2090
Socket Wrench Socket

121532090
NM294-02: RNCC: 3 | RNVC: 2
1201 9498: RNCC: 5 | RNVC: 2
NM294-02: RNCC: 5 | RNVC: 9
A26-50-90: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-323-1718
Mechanical Puller Attachment

123231718
927490377: RNCC: 3 | RNVC: 2
3201-750.07.73.200-000: RNCC: 5 | RNVC: 2

30 Oct 1990

5120-12-131-2836
Box Wrench

121312836
90195: RNCC: 3 | RNVC: 2
55X70DWN32: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-070-0170

5120-12-369-0574
Inserted Hammer Face

123690574
3208030: RNCC: 3 | RNVC: 2
00.74.93.24: RNCC: 5 | RNVC: 2

17 May 2006

5120-12-132-2194
Hand Screw Starter

121322194
9746: RNCC: 3 | RNVC: 2
110844: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-342-8420
Mechanical Puller

123428420
18 910 5303: RNCC: 3 | RNVC: 2

9 Apr 1997

5120-12-342-6599
Face Spanner Wrench Socket

123426599
5037149: RNCC: 3 | RNVC: 2

12 Mar 1997

5120-12-198-7550
Mechanical Puller Set

121987550
5870650001: RNCC: 3 | RNVC: 2
790514077: RNCC: 5 | RNVC: 2
026014: RNCC: 5 | RNVC: 2
5870650001: RNCC: 5 | RNVC: 9

23 Feb 1984

5120-12-332-6507
Pliers

123326507
9689160189: RNCC: 3 | RNVC: 2
91739774: RNCC: 5 | RNVC: 2

1 Sep 1993

5120-12-323-4103
Woven Cable Grip

123234103
01524: RNCC: 3 | RNVC: 2

23 Nov 1990

5120-12-344-6009
Ge Montierwerkzeug

123446009
1X56136458: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-386-1401
Pole Extension

123861401
1832883: RNCC: 3 | RNVC: 2

11 Aug 2011

5120-12-356-4454
Mechanical Puller

123564454
PBAC001: RNCC: 3 | RNVC: 2

28 Feb 2002

5120-12-149-6902

5120-12-340-9361
Face Spanner Wrench Socket

123409361
740589000700: RNCC: 3 | RNVC: 2
740 589 00 07 00: RNCC: 5 | RNVC: 2

6 Jul 1996

5120-12-129-8800

5120-12-391-0174
Cran Mounting Tool

123910174
F6555644: RNCC: 3 | RNVC: 2

15 Jan 2013

5120-12-390-6409
Cross Tip Screwdriver

123906409
159.1023: RNCC: 3 | RNVC: 2

29 Nov 2012

5120-12-314-2324
Boerdelwer Einsatz

123142324
4597-53: RNCC: 3 | RNVC: 2
1653: RNCC: 3 | RNVC: 2

17 Jun 1988

5120-12-330-0170
Schluessel

123300170
9689160178: RNCC: 3 | RNVC: 2
91729488: RNCC: 5 | RNVC: 2

22 Oct 1992

5120-12-311-4817
Spanner Wrench

123114817
272.324.815: RNCC: 3 | RNVC: 2

8 Sep 1987

5120-12-366-9638
Open End Wrench

123669638
0000LLCC96432: RNCC: 3 | RNVC: 2

24 Jun 2005

5120-12-192-1058
Montagewerkzeug

121921058
5D23018: RNCC: 3 | RNVC: 2
5D23018: RNCC: 5 | RNVC: 2
5D23018: RNCC: 5 | RNVC: 2

23 Mar 1982

5120-12-199-5025
Schalter Auszieher

121995025
C22298-A1000-C254: RNCC: 3 | RNVC: 2
C22298A1000C254: RNCC: 5 | RNVC: 2

3 May 1984

5120-12-353-8489
Socket Wrench

123538489
001589540900: RNCC: 3 | RNVC: 2

15 May 2001

5120-12-303-3989
Blindni Mundstueck

123033989
327 501: RNCC: 3 | RNVC: 2

20 Mar 1985

5120-12-010-9610

5120-12-198-0206
Spanner Wrench

121980206
751 M5: RNCC: 3 | RNVC: 2

12 Dec 1983

5120-12-373-8589
Electric Melting Pot

123738589
005 27 042 99: RNCC: 3 | RNVC: 2
WSB 150: RNCC: 5 | RNVC: 2

13 Dec 2007

5120-12-121-6894

5120-12-186-1924
Mechanical Puller

121861924
131300: RNCC: 3 | RNVC: 2

5 Dec 1980

5120-12-170-1042
Spanner Wrench

121701042
12709-20000W2: RNCC: 2 | RNVC: 2
335912-9005.000: RNCC: 3 | RNVC: 2
12709-20000W2: RNCC: 5 | RNVC: 2
12709-20000W2: RNCC: 5 | RNVC: 2
335912-9005.000: RNCC: 5 | RNVC: 9

27 Jun 1977

5120-12-130-9730
Socket Wrench Handle Bar

121309730
143A/01-10/9220-01 9220.0003: RNCC: 2 | RNVC: 2
143A/01-10/9220-01 9220.0003: RNCC: 3 | RNVC: 2
143A01-10-9220-01-9220-0003: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-374-6586
Mechanical Puller

123746586
5075890933/00: RNCC: 3 | RNVC: 2

5 Mar 2008

5120-12-372-0302
Socket Wrench Socket

123720302
WW5-90108: RNCC: 3 | RNVC: 2
80.99603-0254: RNCC: 5 | RNVC: 2
80996030254: RNCC: 5 | RNVC: 2

12 Jun 2007

5120-12-165-0174
Open End Wrench

121650174
NO PRIMARY REF 12-165-0174: RNCC: 3 | RNVC: 2
132881: RNCC: 5 | RNVC: 9
1953M22X24: RNCC: 5 | RNVC: 9
179983: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-130-9092
Retaining Ring Pliers

121309092
N13-12BJ3: RNCC: 3 | RNVC: 2
10302101: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-349-3932
Torque Wrench Adapter

123493932
2300211-990615.000.0: RNCC: 2 | RNVC: 2
2300211-990615.000.0: RNCC: 3 | RNVC: 2
SK14-0354: RNCC: 5 | RNVC: 9

9 Nov 1999

5120-12-173-8961
Spanner Wrench

121738961
5230-300: RNCC: 2 | RNVC: 2
W2358-31: RNCC: 3 | RNVC: 2
5230-300: RNCC: 5 | RNVC: 2
5230-300: RNCC: 5 | RNVC: 9
5230-300: RNCC: 5 | RNVC: 9
W2358-31: RNCC: 5 | RNVC: 9
5230-300: RNCC: 5 | RNVC: 9

22 May 1978

5120-12-195-5434
Socket Wrench

121955434
251012219: RNCC: 3 | RNVC: 2

9 Mar 1983

5120-12-364-2331
Mechanical Jack Handle

123642331
F6782143: RNCC: 3 | RNVC: 2

2 Sep 2004

5120-12-023-0171

5120-12-194-9220

5120-12-145-8054
Socket Wrench

121458054
838589000900: RNCC: 3 | RNVC: 2
8385890009: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-336-3198
Socket Wrench Extension

123363198
DO65916039203: RNCC: 3 | RNVC: 2

10 Nov 1994

5120-12-135-8227
Zu Fuehrungshuelse

121358227
VW428: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-196-2436
Mechanical Puller Attachment

121962436
01TC32506: RNCC: 3 | RNVC: 2

16 Jun 1983

5120-12-383-2419
Seal Inserter

123832419
F6450518: RNCC: 3 | RNVC: 2

28 Sep 2010

5120-12-147-4320
Einbauwerkz Spindel

121474320
01500608020: RNCC: 3 | RNVC: 2
01556080010: RNCC: 5 | RNVC: 9
UD108: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-342-0532
Mechanical Puller Attachment

123420532
314800: RNCC: 3 | RNVC: 2
314800: RNCC: 5 | RNVC: 2
0314800: RNCC: 5 | RNVC: 9

4 Dec 1996

5120-12-342-6101
Crimping Tool Die

123426101
VG95236T11AA102: RNCC: 2 | RNVC: 2
MRP0844: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-363-8354
Bearing And Bushing Inserter

123638354
T671P5001103: RNCC: 3 | RNVC: 2

29 Jul 2004

5120-12-311-6798
Seal Inserter

123116798
80996170131: RNCC: 3 | RNVC: 2
80.99617.0131: RNCC: 5 | RNVC: 2
V953: RNCC: 5 | RNVC: 2

6 Oct 1987

5120-12-364-9367
Pliers

123649367
T3767D 120: RNCC: 3 | RNVC: 2

17 Nov 2004

5120-12-343-6907
Sheet Metalworking Dolly Block

123436907
10845: RNCC: 3 | RNVC: 2
70210008: RNCC: 5 | RNVC: 2

15 Jul 1997

5120-12-347-2502
Spanner Wrench

123472502
9710010000: RNCC: 3 | RNVC: 2

17 Nov 1998

5120-12-319-3403
Face Spanner Wrench Socket

123193403
99354210: RNCC: 3 | RNVC: 2

25 Sep 1989

5120-12-319-9817
Rivet Bucking Bar

123199817
760B10: RNCC: 3 | RNVC: 2

24 Nov 1989

5120-12-314-9583
Spanner Wrench

123149583
P-0-723B: RNCC: 3 | RNVC: 2
P-0-723: RNCC: 5 | RNVC: 9

1 Sep 1988

5120-12-313-8920
Socket Wrench

123138920
1945NB-M5,5: RNCC: 3 | RNVC: 2
105330: RNCC: 5 | RNVC: 2
1945NB-M-5,5MM: RNCC: 5 | RNVC: 2

18 May 1988

5120-12-381-0993
Spanner Wrench

123810993
DIN1810-B40-42: RNCC: 2 | RNVC: 2
6336820: RNCC: 3 | RNVC: 2
40 Z 40-42: RNCC: 5 | RNVC: 2
4010886633687: RNCC: 5 | RNVC: 2
6336820: RNCC: 5 | RNVC: 2
40 Z 40-42: RNCC: 5 | RNVC: 2
4010886633687: RNCC: 5 | RNVC: 2
391418114804: RNCC: 6 | RNVC: 9

11 Jan 2010

5120-12-164-1132
Spanner Wrench

121641132
T1050: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-359-5940
Spanner Wrench

123595940
01TC34837: RNCC: 3 | RNVC: 2

19 Feb 2003

5120-12-344-1829
Schraubst Aufnahme

123441829
HEUERLIFT120MM: RNCC: 3 | RNVC: 2
HEUERLIFT120MM: RNCC: 5 | RNVC: 9

23 Sep 1997

5120-12-387-1425
Open End Wrench

123871425
11978A: RNCC: 3 | RNVC: 2

9 Nov 2011

5120-12-070-0139

5120-12-344-6011
Ge Montierwerkzeug

123446011
1X56136455: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-367-6742
Pliers

123676742
65295160-TCS: RNCC: 3 | RNVC: 2

22 Sep 2005

5120-12-181-8828
Hand Terminal Crimping Tool

121818828
05L8450: RNCC: 3 | RNVC: 2
WZ42: RNCC: 3 | RNVC: 2
620824 NICHT MEHR LIEFERBAR: RNCC: 5 | RNVC: 9
620824: RNCC: 5 | RNVC: 9

21 Dec 1979

5120-12-389-8475
Hand Shovel

123898475
562: RNCC: 3 | RNVC: 2

30 Aug 2012

5120-12-144-5320
Schluessel

121445320
0003-4041-030: RNCC: 3 | RNVC: 2
0003-4041-030: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-309-2607
Ge Montierwerkzeug

123092607
1X56 137 364: RNCC: 3 | RNVC: 2
1X56137364: RNCC: 5 | RNVC: 2

7 Jan 1987

5120-12-319-3406
Hand Caulking Tool

123193406
99374346: RNCC: 3 | RNVC: 2

25 Sep 1989

5120-12-197-5980
Adjustable Wrench

121975980
225-36: RNCC: 3 | RNVC: 2

7 Nov 1983

5120-12-364-5666
Socket Wrench Crowfoot Attachment

123645666
02200022-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-197-6223

5120-12-314-2159
Schluessel

123142159
0852 5034: RNCC: 3 | RNVC: 2
8525034: RNCC: 5 | RNVC: 2

17 Jun 1988

5120-12-383-5533
Socket Head Screw Key

123835533
0159020073000: RNCC: 3 | RNVC: 2
159Z-7: RNCC: 5 | RNVC: 2

8 Nov 2010

5120-12-347-3114
Montierdorn

123473114
0852 3068: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-12-158-8567
Mechanical Puller Attachment

121588567
F30272095: RNCC: 3 | RNVC: 2
F362890272095: RNCC: 5 | RNVC: 2
000589853300: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-1971
Socket Wrench Socket

123681971
02410024-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-379-3598
Spanner Wrench

123793598
ZR10K-1: RNCC: 3 | RNVC: 2

15 Jul 2009

5120-12-126-3046
Socket Wrench

121263046
769S-3: RNCC: 3 | RNVC: 2
3400003: RNCC: 3 | RNVC: 2
27-32X38: RNCC: 3 | RNVC: 2
1926210004: RNCC: 5 | RNVC: 2
622540: RNCC: 5 | RNVC: 2
03400003: RNCC: 5 | RNVC: 2
769-3: RNCC: 5 | RNVC: 9
08360: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-137-1234
Spanner Wrench

121371234
T16818-2: RNCC: 3 | RNVC: 2
T16818-2: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-178-3288
Open End Wrench

121783288
NO PRIMARY REF 12-178-3288: RNCC: 3 | RNVC: 2
12E9BA: RNCC: 5 | RNVC: 9
40769090: RNCC: 5 | RNVC: 9

12 Apr 1979

5120-12-152-5611
Mechanical Puller

121525611
169106401: RNCC: 3 | RNVC: 2
0144-49-03: RNCC: 5 | RNVC: 9
02416009: RNCC: 5 | RNVC: 9
2416009UE0144-49: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-382-7585
Screwdriver Bit

123827585
05060190001: RNCC: 3 | RNVC: 2
867/4ZTX27X89: RNCC: 5 | RNVC: 2

5 Aug 2010

5120-12-337-2244
Socket Wrench Socket

123372244
11.49001-0408: RNCC: 3 | RNVC: 2
221.060: RNCC: 5 | RNVC: 2
11.49001-0408: RNCC: 5 | RNVC: 9
221.060: RNCC: 5 | RNVC: 9

3 Feb 1995

5120-12-177-0560
Ausziehvorrichtung

121770560
120630: RNCC: 3 | RNVC: 2
99346229: RNCC: 3 | RNVC: 2
698-702-0041: RNCC: 5 | RNVC: 2
8220250: RNCC: 5 | RNVC: 2
8470854: RNCC: 5 | RNVC: 2

9 Jan 1979

5120-12-319-1227
Hand Hammer

123191227
4420307: RNCC: 3 | RNVC: 2

8 Sep 1989

5120-12-304-3394
Rotating Members Aligning Tool

123043394
201589081500: RNCC: 3 | RNVC: 2

5 Jul 1985

5120-12-390-2673
Stud Inserter

123902673
F30148982: RNCC: 3 | RNVC: 2

24 Oct 2012

5120-12-186-7359
Socket Wrench Socket

121867359
99354002: RNCC: 3 | RNVC: 2
416530: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-358-2659
Screwdriver Bit

123582659
614787505: RNCC: 3 | RNVC: 2
614 787 505: RNCC: 5 | RNVC: 2

2 Oct 2002

5120-12-322-2821
Spanner Wrench

123222821
7368901: RNCC: 3 | RNVC: 2

8 Aug 1990

5120-12-347-5574
Mechanical Puller

123475574
625589003500: RNCC: 3 | RNVC: 2
7083662: RNCC: 5 | RNVC: 2
625 589 00 35 00: RNCC: 5 | RNVC: 2
625 589 00 35 00: RNCC: 5 | RNVC: 9

6 Jan 1999

5120-12-186-7311
Seal Inserter

121867311
99363220: RNCC: 3 | RNVC: 2
110810: RNCC: 5 | RNVC: 9
110810: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-340-8981
Schraubendrehersatz

123408981
6800001: RNCC: 3 | RNVC: 2

2 Jul 1996

5120-12-185-6476
Drive Pin Punch

121856476
51283045: RNCC: 3 | RNVC: 9

21 Oct 1980

5120-12-314-5883
Flat Tip Screwdriver

123145883
40911W1: RNCC: 3 | RNVC: 2
6000008: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-12-371-5167
Mechanical Puller

123715167
71007553: RNCC: 3 | RNVC: 2

11 Apr 2007

5120-12-380-6491
Socket Wrench Crowfoot Attachment

123806491
F30379905: RNCC: 3 | RNVC: 2

16 Nov 2009

5120-12-358-1857
Torque Wrench

123581857
714 71 24: RNCC: 3 | RNVC: 2

24 Sep 2002

5120-12-171-3152
Ausdrueckwerkzeug

121713152
105-31729W1: RNCC: 3 | RNVC: 2

29 Sep 1977

5120-12-300-8825
Open End Wrench

123008825
4200112: RNCC: 3 | RNVC: 2

7 Sep 1984

5120-12-188-7648
Preszring

121887648
406589074300: RNCC: 3 | RNVC: 2

28 Jul 1981

5120-12-314-6085
Bearing And Bushing Inserter

123146085
0852 6076: RNCC: 3 | RNVC: 2
8526076: RNCC: 5 | RNVC: 2
MAGERD 5591: RNCC: 5 | RNVC: 9

22 Jul 1988

5120-12-328-6641
Nieter Und Nietsort

123286641
54866101: RNCC: 3 | RNVC: 9

12 Jun 1992

5120-12-194-0833
Torque Wrench Adapter

121940833
TL5120-0086-640: RNCC: 2 | RNVC: 2
21/DCA-13: RNCC: 5 | RNVC: 9
7852-8 13: RNCC: 5 | RNVC: 9
6264110011: RNCC: 5 | RNVC: 9
6630D-13: RNCC: 5 | RNVC: 9
732/40 13: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-305-1660
Adjustable Wrench

123051660
1315-190: RNCC: 3 | RNVC: 2
01315007506: RNCC: 5 | RNVC: 2
13150075: RNCC: 5 | RNVC: 2

3 Oct 1985

5120-12-120-5353
Gasoline Blowtorch

121205353
NO PRIMARY REF 12-120-5353: RNCC: 3 | RNVC: 2
DIN8502-UA0,35-18RMS: RNCC: 5 | RNVC: 9
UA0-35-18RDIN8502MS: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-301-4560
Flat Tip Screwdriver

123014560
NO PRIMARY REF 12-301-4560: RNCC: 3 | RNVC: 2
8010-1-6X11X200: RNCC: 5 | RNVC: 9

16 Oct 1984

5120-12-702-9020
Socket Wrench

127029020
4709200-30-1: RNCC: 3 | RNVC: 2

5 Sep 1996

5120-12-156-1612
Box Wrench

121561612
NM287-03: RNCC: 3 | RNVC: 2
NM287-03: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-2709
Oe Stanz- Stempel

121332709
STPLL19: RNCC: 3 | RNVC: 2
STPLL19: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-1457
Hand Hammer

123711457
2951: RNCC: 3 | RNVC: 2
00.74.17.45: RNCC: 5 | RNVC: 2

20 Feb 2007

5120-12-373-2634
Crimping Tool Die

123732634
974913: RNCC: 3 | RNVC: 2
4003773030843: RNCC: 5 | RNVC: 2

15 Oct 2007

5120-12-370-9123
Socket Head Screw Key

123709123
54965: RNCC: 3 | RNVC: 2
00.43.46.78: RNCC: 5 | RNVC: 2

16 Jan 2007

5120-12-155-8548

5120-12-308-1775
Elektron Auszieher

123081775
PUL-A-DIP203: RNCC: 3 | RNVC: 2
PUL-A-DIP24/28PIN/0.6 INCH: RNCC: 5 | RNVC: 2
603-087: RNCC: 5 | RNVC: 2

11 Sep 1986

5120-12-126-1720
Screw Extractor

121261720
NO PRIMARY REF 12-126-1720: RNCC: 3 | RNVC: 2
4029-9-11: RNCC: 5 | RNVC: 9
1425: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-354-0319
Seal Inserter

123540319
403589051500: RNCC: 3 | RNVC: 2
1113066: RNCC: 5 | RNVC: 2
403 589 05 15 00: RNCC: 5 | RNVC: 2
403 589 05 15 00: RNCC: 5 | RNVC: 2

29 May 2001

5120-12-363-9543
Bearing And Bushing Inserter And Remover

123639543
T671P5002105: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-349-9196
Montierhuelse

123499196
45.004.51.179: RNCC: 3 | RNVC: 2

26 Jan 2000

5120-12-129-1376

5120-12-093-7224

5120-12-157-7822
Spannkluppe

121577822
050 108: RNCC: 3 | RNVC: 2
050108: RNCC: 3 | RNVC: 2
WZ72: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-330-0174
Schluessel

123300174
9689160902: RNCC: 3 | RNVC: 2
91729496: RNCC: 5 | RNVC: 2

22 Oct 1992

5120-12-331-9825
Bearing And Bushing Inserter Set

123319825
17560W05: RNCC: 3 | RNVC: 2

13 Jul 1993

5120-12-343-3657
Eindrueckwerkzeugsa

123433657
PM3420: RNCC: 3 | RNVC: 2

11 Jun 1997

5120-12-342-6109
Crimping Tool Die

123426109
VG95236T11AA110: RNCC: 2 | RNVC: 2
MRP0852: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-314-2775
Montierhuelse

123142775
0852 9735: RNCC: 3 | RNVC: 2
8529735: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-172-2791
Spanner Wrench

121722791
335929-9014.000: RNCC: 3 | RNVC: 2
1240-14100W2: RNCC: 5 | RNVC: 2
1240-14100W2: RNCC: 5 | RNVC: 2
335929-9014.000: RNCC: 5 | RNVC: 9

10 Jan 1978

5120-12-345-4416
Hand Screw Jack

123454416
2792.10: RNCC: 3 | RNVC: 2

16 Mar 1998

5120-12-196-2557
Z Einstellwerkzeug

121962557
0851 8465: RNCC: 3 | RNVC: 2
8518465: RNCC: 5 | RNVC: 2

20 Jun 1983

5120-12-384-5764
Torque Wrench Adapter

123845764
F30451199: RNCC: 3 | RNVC: 2

9 Mar 2011

5120-12-021-5717

5120-12-307-2655
Mechanical Puller

123072655
4900238-5300: RNCC: 2 | RNVC: 2
279.991123: RNCC: 3 | RNVC: 2
279.991123: RNCC: 5 | RNVC: 9
279.991123: RNCC: 5 | RNVC: 9

28 May 1986

5120-12-368-0626
Torque Wrench Adapter

123680626
731A/40-9/16: RNCC: 3 | RNVC: 2
58614034: RNCC: 5 | RNVC: 2

30 Nov 2005

5120-12-122-8096
Tap And Reamer Wrench

121228096
DIN1814-0: RNCC: 2 | RNVC: 2
06270000: RNCC: 3 | RNVC: 2
83100: RNCC: 3 | RNVC: 2
7500-0: RNCC: 3 | RNVC: 2
181-0: RNCC: 3 | RNVC: 2
TVA5120-2-263-012: RNCC: 5 | RNVC: 1
TVA5120-2-263-012-1.1.1: RNCC: 5 | RNVC: 2
01.41.44.79: RNCC: 5 | RNVC: 2
767-1-8: RNCC: 5 | RNVC: 9
2X5DIN1814: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5794
Socket Wrench Socket

121235794
NO PRIMARY REF 12-123-5794: RNCC: 3 | RNVC: 2
180952: RNCC: 5 | RNVC: 9
9500DZ2 5/8: RNCC: 5 | RNVC: 9
9500SZ2 5-8: RNCC: 5 | RNVC: 9
110726: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-190-0426
Ausziehvorrichtung

121900426
VG95211-ML-121900426: RNCC: 2 | RNVC: 2
P-895041-403: RNCC: 3 | RNVC: 2
P895041-403: RNCC: 5 | RNVC: 2

4 Nov 1981

5120-12-126-1959
Scratch Awl

121261959
NO PRIMARY REF 12-126-1959: RNCC: 3 | RNVC: 2
27-1-19: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-3517
Box Wrench

121333517
1300M10X11: RNCC: 3 | RNVC: 2
625-10X11: RNCC: 3 | RNVC: 2
103982: RNCC: 5 | RNVC: 2
1408110003: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-197-6246
Socket Head Screw Key

121976246
1997L-Z7/64: RNCC: 3 | RNVC: 2
130248: RNCC: 5 | RNVC: 2
1997LZ7-64: RNCC: 5 | RNVC: 2
85-691-7054: RNCC: 6 | RNVC: 9

8 Nov 1983

5120-12-388-0593
Crimping Tool Die

123880593
1185-23102: RNCC: 3 | RNVC: 2
80.99625-0105: RNCC: 5 | RNVC: 2
80996250105: RNCC: 5 | RNVC: 2

22 Feb 2012

5120-12-329-1509
Open End Wrench

123291509
DIN133-105: RNCC: 2 | RNVC: 2
133-105: RNCC: 3 | RNVC: 2

21 Jul 1992

5120-12-139-3026
Schluesseleinsatz

121393026
8205891407: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-375-9625
Ratchet Wrench

123759625
349310: RNCC: 3 | RNVC: 2

24 Jul 2008

5120-12-127-5421

5120-12-350-2720
Bl Ausbeulwerkzeug

123502720
066RTB: RNCC: 3 | RNVC: 2

9 Mar 2000

5120-12-344-7832
Elektron Auszieher

123447832
54.0053.310.00: RNCC: 3 | RNVC: 2

9 Dec 1997

Load More Results