What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 17 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 17 of 62

5120-12-305-2415
Schluessel

123052415
PYOW008: RNCC: 3 | RNVC: 2
99865030007: RNCC: 5 | RNVC: 2

11 Oct 1985

5120-12-357-7744
Eindrueckwerkzeug

123577744
510018: RNCC: 3 | RNVC: 2

22 Jul 2002

5120-12-093-7212

5120-12-339-9294
Spatula

123399294
129 044: RNCC: 3 | RNVC: 2

2 Feb 1996

5120-12-120-6570
Hand Hammer

121206570
6610-400: RNCC: 3 | RNVC: 2
705-400: RNCC: 3 | RNVC: 2
38843: RNCC: 3 | RNVC: 9
705-400G: RNCC: 5 | RNVC: 2
7050004: RNCC: 5 | RNVC: 2
400SDIN1041: RNCC: 5 | RNVC: 9
2-400MST: RNCC: 5 | RNVC: 9
DIN1041-400S: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-304-9462
Mechanical Puller

123049462
6796941-200W32: RNCC: 3 | RNVC: 2

10 Sep 1985

5120-12-186-0059
Open End Box Wrench

121860059
2817110: RNCC: 3 | RNVC: 2
2817-110: RNCC: 5 | RNVC: 2

19 Nov 1980

5120-12-123-0074
Trowel

121230074
54830-15: RNCC: 3 | RNVC: 2
105-16: RNCC: 3 | RNVC: 2
54830015: RNCC: 5 | RNVC: 2
637L212-15: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-2541
Hand Powered Poppet Valve Lapper

121352541
795-3: RNCC: 3 | RNVC: 2
012C151: RNCC: 3 | RNVC: 2
4120003: RNCC: 3 | RNVC: 2
62585900: RNCC: 5 | RNVC: 2
52680: RNCC: 5 | RNVC: 2
5798620003: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-331-0699
Rohr- Zange

123310699
181113: RNCC: 3 | RNVC: 9
1074-1: RNCC: 5 | RNVC: 2

18 Mar 1993

5120-12-171-3144
Ausdrueckvorrichtun

121713144
VG95211-ML-121713144: RNCC: 2 | RNVC: 2
105-31711W2: RNCC: 3 | RNVC: 2

29 Sep 1977

5120-12-362-0810
Inserted Hammer Face

123620810
462-40: RNCC: 3 | RNVC: 2
E225-40: RNCC: 3 | RNVC: 2
00.75.29.60: RNCC: 5 | RNVC: 2

6 Jan 2004

5120-12-363-9688
C Clamp

123639688
T671P5002121: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-383-2184
Socket Wrench Extension

123832184
509QR/3: RNCC: 3 | RNVC: 2
13011004: RNCC: 5 | RNVC: 2

27 Sep 2010

5120-12-391-9718
Mechanical Puller Attachment

123919718
5039000-990001.002.0: RNCC: 3 | RNVC: 2

23 Apr 2013

5120-12-163-8898

5120-12-175-5972
Zentrier- Dorn

121755972
406589006100: RNCC: 3 | RNVC: 2
406 589 00 61: RNCC: 5 | RNVC: 2

3 Oct 1978

5120-12-127-2810
Kegel Auftreibrohr

121272810
WU51: RNCC: 3 | RNVC: 2
WU51: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-170-8418
Pliers

121708418
185823: RNCC: 3 | RNVC: 2
185823: RNCC: 5 | RNVC: 2
185823: RNCC: 5 | RNVC: 9
185825: RNCC: 5 | RNVC: 9
239515185823: RNCC: 5 | RNVC: 9
185825: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-390-2610
Seal Inserter

123902610
80996170147: RNCC: 3 | RNVC: 2
80.99617.0147: RNCC: 5 | RNVC: 2

23 Oct 2012

5120-12-347-4393
Crimping Tool Die

123474393
C50: RNCC: 3 | RNVC: 2

10 Dec 1998

5120-12-313-8821
Spanner Wrench

123138821
4207422: RNCC: 3 | RNVC: 2

17 May 1988

5120-12-094-1304

5120-12-384-8821
Machinist's Vise

123848821
46.000.141: RNCC: 3 | RNVC: 2

6 Apr 2011

5120-12-355-3945
Seal Inserter

123553945
5555133: RNCC: 3 | RNVC: 2

9 Nov 2001

5120-12-173-8320
Wood Mallet

121738320
DIN7462-B60: RNCC: 2 | RNVC: 2
B60DIN7462: RNCC: 5 | RNVC: 9

16 May 1978

5120-12-341-6765
Mechanical Puller Attachment

123416765
80996280081: RNCC: 3 | RNVC: 2
921-060-30: RNCC: 5 | RNVC: 2

12 Oct 1996

5120-12-156-1578
Socket Wrench Socket

121561578
NM293-23: RNCC: 3 | RNVC: 2
NM293-23: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-335-4106
Mechanical Puller

123354106
0852 3063: RNCC: 3 | RNVC: 2
8523063: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-139-8568
Verbindungsn Zange

121398568
3125890261: RNCC: 3 | RNVC: 2
312589026100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-355-2056
Torque Wrench Adapter

123552056
6402-1S: RNCC: 3 | RNVC: 2
725QR/5: RNCC: 3 | RNVC: 2
58253005: RNCC: 5 | RNVC: 2

22 Oct 2001

5120-12-153-7970
Schluessel

121537970
CH2522-2-2: RNCC: 3 | RNVC: 2
560589070800: RNCC: 5 | RNVC: 2
5605890708/00: RNCC: 5 | RNVC: 2
CH2522-2-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-2151
Griff

121712151
80996170005: RNCC: 3 | RNVC: 2
80.99617-0005: RNCC: 5 | RNVC: 2

19 Sep 1977

5120-12-383-7118
Mechan Adaptersatz

123837118
064308: RNCC: 3 | RNVC: 2
064308: RNCC: 5 | RNVC: 2

29 Nov 2010

5120-12-196-7603
Mechanical Puller

121967603
KDEP2911: RNCC: 3 | RNVC: 2
0535342: RNCC: 5 | RNVC: 2
535342: RNCC: 5 | RNVC: 9

11 Aug 1983

5120-12-070-0137

5120-12-317-1472
Crimping Tool Die

123171472
300438441: RNCC: 3 | RNVC: 2

14 Mar 1989

5120-12-355-2876
Socket Wrench

123552876
388: RNCC: 3 | RNVC: 2
01481: RNCC: 5 | RNVC: 2

30 Oct 2001

5120-12-312-3806
Preformed Packing Inserter

123123806
KDEP2897: RNCC: 3 | RNVC: 2
KDEP 2897: RNCC: 5 | RNVC: 2

22 Dec 1987

5120-12-312-7828
Gear Inserter

123127828
1X56115497: RNCC: 3 | RNVC: 2
1X56 115 497: RNCC: 5 | RNVC: 2
V115497: RNCC: 5 | RNVC: 2

4 Feb 1988

5120-12-174-4093
Druckstueck

121744093
7882622: RNCC: 3 | RNVC: 2
1000025-850000-09: RNCC: 5 | RNVC: 2
1000025-850000.09: RNCC: 5 | RNVC: 2
7882-622: RNCC: 5 | RNVC: 2

29 Jun 1978

5120-12-357-7339
Spring Inserter And Remover

123577339
F6144873: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-358-8688
Socket Wrench Set

123588688
96593120: RNCC: 3 | RNVC: 2

22 Nov 2002

5120-12-380-3511
Chain Type Ratchet Lever Puller

123803511
C85 3000: RNCC: 3 | RNVC: 2
4025092050197: RNCC: 5 | RNVC: 2

22 Oct 2009

5120-12-332-5320
Socket Wrench

123325320
3249: RNCC: 3 | RNVC: 2

18 Aug 1993

5120-12-305-6382
Swivel Knob Jeweler's Screwdriver

123056382
2003F00: RNCC: 3 | RNVC: 9

28 Nov 1985

5120-12-310-5398
Bearing And Bushing Inserter

123105398
80996170127: RNCC: 3 | RNVC: 2
80.99617.0127: RNCC: 5 | RNVC: 2

29 May 1987

5120-12-366-5888
Seal Inserter

123665888
0855-03-37-00/35: RNCC: 3 | RNVC: 2
314272: RNCC: 5 | RNVC: 2

11 May 2005

5120-12-126-3916

5120-12-190-7764
Seal Inserter

121907764
61974300: RNCC: 3 | RNVC: 2
619 743 00: RNCC: 5 | RNVC: 9

14 Dec 1981

5120-12-357-7461
Pliers

123577461
261: RNCC: 3 | RNVC: 2

18 Jul 2002

5120-12-154-7515
Montagevorrichtung

121547515
390-230B00-00: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-171-1937
Montagewerkzeug

121711937
1X56 136 582: RNCC: 3 | RNVC: 2
81668506009: RNCC: 5 | RNVC: 2
81.66850-6009: RNCC: 5 | RNVC: 2
1X56136582: RNCC: 5 | RNVC: 9

16 Sep 1977

5120-12-343-8174
Hand Hydraulic Jack

123438174
42261335: RNCC: 3 | RNVC: 2

31 Jul 1997

5120-12-381-9020
Pipe Wrench

123819020
0530850S: RNCC: 3 | RNVC: 2

15 Apr 2010

5120-12-133-4535

5120-12-179-5369
Spanner Wrench

121795369
0003-3997-000: RNCC: 3 | RNVC: 2
0003-3997-000: RNCC: 5 | RNVC: 9

4 Jul 1979

5120-12-332-7070
Bearing And Bushing Inserter

123327070
117-46300W1: RNCC: 3 | RNVC: 2
117-46300-W1: RNCC: 5 | RNVC: 9

8 Sep 1993

5120-12-360-5805
Mechanical Puller Adapter

123605805
5275380330: RNCC: 3 | RNVC: 2

11 Jun 2003

5120-12-126-3041

5120-12-362-5505
Schluessel

123625505
120 589 14 07 00: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-12-393-6995
Mechanical Puller Body

123936995
A-0261-001-02: RNCC: 3 | RNVC: 2

2 Oct 2013

5120-12-197-6869
Socket Wrench

121976869
NO PRIMARY REF 12-197-6869: RNCC: 3 | RNVC: 2
336-4,0X120: RNCC: 5 | RNVC: 9

14 Nov 1983

5120-12-025-6630

5120-12-134-2638
Abpreszvorrichtung

121342638
070M01000: RNCC: 3 | RNVC: 2
VQ56789: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-133-3576
Socket Wrench

121333576
315-2-1-00-30: RNCC: 3 | RNVC: 2
2323-990-2: RNCC: 5 | RNVC: 2
2323-990-2: RNCC: 5 | RNVC: 2
DBSB1-521ITEM4: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-146-8059
Flat Tip Screwdriver

121468059
NM256-05: RNCC: 3 | RNVC: 2
JD5120-12-146-8059: RNCC: 5 | RNVC: 2
NM256-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-5582
Mechanical Puller

121815582
NO PRIMARY REF 12-181-5582: RNCC: 3 | RNVC: 2
042E201: RNCC: 5 | RNVC: 9
2562: RNCC: 5 | RNVC: 9

30 Nov 1979

5120-12-303-8435
Spanner Wrench

123038435
009-030.105-005W3: RNCC: 3 | RNVC: 2
12790-110000.005: RNCC: 5 | RNVC: 2
009-039.105-005W3: RNCC: 5 | RNVC: 9

7 May 1985

5120-12-363-0359
Mechanical Puller

123630359
01TC33092: RNCC: 3 | RNVC: 2
01TC33092: RNCC: 5 | RNVC: 2

28 Apr 2004

5120-12-353-2082
Socket Wrench Socket

123532082
CBD45071P02: RNCC: 3 | RNVC: 2

12 Feb 2001

5120-12-391-0781
Mounting To Sleeve

123910781
F6558561: RNCC: 3 | RNVC: 2

23 Jan 2013

5120-12-311-0214
Eindrueckwerkzeug

123110214
387589004300: RNCC: 3 | RNVC: 2

17 Jul 1987

5120-12-124-1769
Driftpin

121241769
299665: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-389-8156
Seal Inserter

123898156
F30374076: RNCC: 3 | RNVC: 2

28 Aug 2012

5120-12-311-0942
Bearing And Bushing Inserter

123110942
395589011500: RNCC: 3 | RNVC: 2

24 Jul 1987

5120-12-357-7130
Eindrueckwerkzeug

123577130
520008: RNCC: 3 | RNVC: 2

15 Jul 2002

5120-12-091-4761

5120-12-133-4520

5120-12-123-5881
Box Wrench

121235881
113-5X5,5: RNCC: 3 | RNVC: 2
113M5X5,5: RNCC: 5 | RNVC: 2
113MM5X5,5MB: RNCC: 5 | RNVC: 2
100294: RNCC: 5 | RNVC: 9
4SM5X5,5: RNCC: 5 | RNVC: 9
4SM5X5-5: RNCC: 5 | RNVC: 9
41010555: RNCC: 5 | RNVC: 9
17-5X5-5*: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-1577
Socket Wrench Socket

121561577
NM293-21: RNCC: 3 | RNVC: 2
NM293-21: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-185-7205
Flat Tip Screwdriver

121857205
NO PRIMARY REF 12-185-7205: RNCC: 3 | RNVC: 2
335U5X300: RNCC: 5 | RNVC: 9

25 Oct 1980

5120-12-321-0208
Mechanical Puller

123210208
467-416/0851-01-00-00: RNCC: 3 | RNVC: 2

16 Mar 1990

5120-12-166-1970
Abzieher Spindel

121661970
8475447: RNCC: 3 | RNVC: 2
8207-629: RNCC: 5 | RNVC: 2

12 Aug 1976

5120-12-337-6967
Box Wrench

123376967
2A-70: RNCC: 3 | RNVC: 2
2A70: RNCC: 3 | RNVC: 2
603503: RNCC: 5 | RNVC: 2
8300003: RNCC: 5 | RNVC: 2

29 Mar 1995

5120-12-368-2539
Combination Box And Open End Wrench

123682539
40482424-TCS: RNCC: 3 | RNVC: 2

17 Jan 2006

5120-12-305-4795
Mechanical Puller Step Plate

123054795
314589006300: RNCC: 3 | RNVC: 2

12 Nov 1985

5120-12-306-8920
Spanner Wrench

123068920
66636800: RNCC: 3 | RNVC: 2

15 Apr 1986

5120-12-023-1393

5120-12-366-2715
Seal Inserter And Remover

123662715
142640: RNCC: 3 | RNVC: 2

4 Apr 2005

5120-12-365-0528
Mechanical Puller

123650528
CBD45463G01: RNCC: 3 | RNVC: 2

25 Nov 2004

5120-12-363-9696
Bearing And Bushing Inserter

123639696
T671P5002215: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-384-8278
Hand Hammer

123848278
51.000.039: RNCC: 3 | RNVC: 2
51.000.039: RNCC: 5 | RNVC: 2

1 Apr 2011

5120-12-385-5084
Socket Wrench Screwdriver Attachment

123855084
7997751: RNCC: 3 | RNVC: 2
7997751: RNCC: 5 | RNVC: 2

9 Jun 2011

5120-12-123-4844
Open End Wrench

121234844
DIN133-85: RNCC: 2 | RNVC: 2
2300-85: RNCC: 3 | RNVC: 2
133-85: RNCC: 3 | RNVC: 2
452-85: RNCC: 3 | RNVC: 2
85DIN133: RNCC: 5 | RNVC: 2
571A301-85: RNCC: 5 | RNVC: 9
1102110014: RNCC: 5 | RNVC: 9
50610: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-152-0727
Schluessel

121520727
23111-7220.00: RNCC: 2 | RNVC: 2
23111-7220.00: RNCC: 3 | RNVC: 2
23111-7220-00: RNCC: 5 | RNVC: 9
23111-7220.00: RNCC: 5 | RNVC: 9
23111-7220-00: RNCC: 5 | RNVC: 9
23111-7220-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-334-9495
Bearing And Bushing Inserter

123349495
11.49023-0179: RNCC: 3 | RNVC: 2
11.49023-0179: RNCC: 5 | RNVC: 2
11.49023-0179: RNCC: 5 | RNVC: 2
11.49023-0179: RNCC: 5 | RNVC: 9

5 Jul 1994

5120-12-363-2362
Bearing And Bushing Inserter

123632362
F30377258: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-328-4270
Seal Inserter

123284270
F623019375365: RNCC: 3 | RNVC: 2
F6375365: RNCC: 5 | RNVC: 2

16 May 1992

5120-12-197-6224
Box Wrench

121976224
110360: RNCC: 3 | RNVC: 2
110360: RNCC: 3 | RNVC: 2

8 Nov 1983

5120-12-199-6636
Box Wrench

121996636
206589000900: RNCC: 3 | RNVC: 2

19 May 1984

5120-12-321-6130
Face Spanner Wrench Socket

123216130
272.369 555: RNCC: 2 | RNVC: 2
272.369 555: RNCC: 3 | RNVC: 2
CTWH-KPT18R: RNCC: 5 | RNVC: 2

7 Jun 1990

5120-12-310-4575
Face Spanner Wrench Socket

123104575
01TC11012: RNCC: 3 | RNVC: 2
01TC11012: RNCC: 5 | RNVC: 9

22 May 1987

5120-12-335-3157
Screwdriver Bit

123353157
0852 5029: RNCC: 3 | RNVC: 2
8525029: RNCC: 5 | RNVC: 2

9 Aug 1994

5120-12-021-2555

5120-12-124-2408
Driftpin

121242408
299661: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-370-7675
Face Spanner Wrench Socket

123707675
5176326: RNCC: 3 | RNVC: 2

19 Dec 2006

5120-12-126-4688
Electronic Equipment Alignment Tool

121264688
NO PRIMARY REF 12-126-4688: RNCC: 3 | RNVC: 2
108708: RNCC: 5 | RNVC: 9
5521: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-337-9777
Hand Tube Bender

123379777
5082-0000: RNCC: 3 | RNVC: 2

8 May 1995

5120-12-320-9970
Hand- Hammersatz

123209970
250A-15-1500: RNCC: 3 | RNVC: 2
250A-15-1500: RNCC: 5 | RNVC: 9

14 Mar 1990

5120-12-313-7907
Ratchet Wrench

123137907
31KR13: RNCC: 3 | RNVC: 2
625 353: RNCC: 5 | RNVC: 2

5 May 1988

5120-12-340-8060
Mechanical Puller Attachment

123408060
33215: RNCC: 3 | RNVC: 2
7746305: RNCC: 3 | RNVC: 2
33215: RNCC: 5 | RNVC: 9

14 Jun 1996

5120-12-161-4299
Electronic Equipment Alignment Tool

121614299
1712180110: RNCC: 3 | RNVC: 2
17121 80110: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-023-1423

5120-12-044-4915

5120-12-139-8578
Abziehvorrichtung

121398578
3125890833: RNCC: 3 | RNVC: 2
312589083300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-700-6689
Hand Hydraulic Jack

127006689
54-60034513436: RNCC: 2 | RNVC: 2

6 Oct 1992

5120-12-335-9401
Mechanical Puller

123359401
0851 3222: RNCC: 3 | RNVC: 2
8513222: RNCC: 5 | RNVC: 2

4 Oct 1994

5120-12-364-3121
Socket Wrench Extension

123643121
11010014-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-188-7977
Mechanical Puller

121887977
406589046300: RNCC: 3 | RNVC: 2

29 Jul 1981

5120-12-308-5636
Montage- Hebel

123085636
99372218: RNCC: 3 | RNVC: 2
410870: RNCC: 5 | RNVC: 9
410870: RNCC: 5 | RNVC: 9

23 Oct 1986

5120-12-195-5317
Socket Wrench

121955317
5182053: RNCC: 3 | RNVC: 2

1 Jan 2000

5120-12-070-0183

5120-12-094-1293

5120-12-187-3362

5120-12-134-2729
Socket Wrench

121342729
027M06300: RNCC: 3 | RNVC: 2
VM65793: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-166-9822
Abzieher Haken

121669822
26-21C1012G002P7: RNCC: 3 | RNVC: 2

10 Nov 1976

5120-12-391-7139
Mechanical Puller Step Plate

123917139
80996230036: RNCC: 3 | RNVC: 2
80.99623-0036: RNCC: 5 | RNVC: 2

28 Mar 2013

5120-12-314-0838
Hammer Aufnahme

123140838
5803471-201811.00: RNCC: 2 | RNVC: 2

4 Jun 1988

5120-12-197-0335
Socket Wrench Screwdriver Attachment

121970335
44A-1/8: RNCC: 3 | RNVC: 2
00025313083: RNCC: 3 | RNVC: 2
999/4/42556/467: RNCC: 5 | RNVC: 1
01450008: RNCC: 5 | RNVC: 2
01 45 00 08: RNCC: 5 | RNVC: 9
44A1/8: RNCC: 5 | RNVC: 9
00025183183: RNCC: 5 | RNVC: 9

12 Sep 1983

5120-12-127-0422
Socket Wrench Socket

121270422
NO PRIMARY REF 12-127-0422: RNCC: 3 | RNVC: 2
109507: RNCC: 5 | RNVC: 9
7410DM9: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-9496
Socket Wrench

121559496
NM393-06: RNCC: 3 | RNVC: 2
NM393-06: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-345-5146
Inserted Hammer Face

123455146
10956R-60: RNCC: 3 | RNVC: 2
2507: RNCC: 3 | RNVC: 2
79 05 00 60: RNCC: 5 | RNVC: 2
00.74.16.44: RNCC: 5 | RNVC: 2

26 Mar 1998

5120-12-170-8415
Spanner Wrench

121708415
NO PRIMARY REF 12-170-8415: RNCC: 3 | RNVC: 2
213168: RNCC: 5 | RNVC: 2
213168: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-176-1111
Retaining Ring Pliers

121761111
VW161A: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-189-3447
Hand Blind Riveter

121893447
GBM30: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-12-127-3805
Schluessel

121273805
83.09155-0001: RNCC: 3 | RNVC: 2
83091550001: RNCC: 3 | RNVC: 2
03.07360-4740: RNCC: 5 | RNVC: 2
03073604740: RNCC: 5 | RNVC: 2
307F4740: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-351-4245
Seal Inserter

123514245
9255004000: RNCC: 3 | RNVC: 2

25 Jul 2000

5120-12-373-4644
Flat Tip And Cross Tip Screwdriver Set

123734644
0613 942 26: RNCC: 3 | RNVC: 2

6 Nov 2007

5120-12-344-8268
Spanner Wrench

123448268
6735934: RNCC: 3 | RNVC: 2
6735934: RNCC: 5 | RNVC: 9

15 Dec 1997

5120-12-010-9678

5120-12-334-5387
Mechanical Puller Attachment

123345387
0853 0170.012: RNCC: 3 | RNVC: 2

20 May 1994

5120-12-349-4870
Box Wrench

123494870
2A-85: RNCC: 3 | RNVC: 2
2A-85: RNCC: 5 | RNVC: 2

22 Nov 1999

5120-12-372-6540
Flat Tip Screwdriver

123726540
48201080: RNCC: 3 | RNVC: 2
48201080: RNCC: 5 | RNVC: 2
4018754123032: RNCC: 5 | RNVC: 2
0020652: RNCC: 5 | RNVC: 2

8 Aug 2007

5120-12-385-6099
Mecha Fitting Tool

123856099
F6453596: RNCC: 3 | RNVC: 2

21 Jun 2011

5120-12-022-8152

5120-12-127-4633

5120-12-010-5243

5120-12-309-6013
Drift Punch

123096013
W5747 220A: RNCC: 3 | RNVC: 2

6 Feb 1987

5120-12-318-0774
Flat Tip Screwdriver

123180774
04105: RNCC: 3 | RNVC: 9

8 Jun 1989

5120-12-129-0678
Crowfoot Wrench Head Socket

121290678
NO PRIMARY REF 12-129-0678: RNCC: 3 | RNVC: 2
108378: RNCC: 5 | RNVC: 9
5110Z9-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-369-3269
Eindrueckwerkzeug

123693269
80996040099: RNCC: 3 | RNVC: 2
80.99604-0099: RNCC: 5 | RNVC: 2

22 Jun 2006

5120-12-133-3620
Open End Wrench

121333620
NO PRIMARY REF 12-133-3620: RNCC: 3 | RNVC: 2
105811: RNCC: 5 | RNVC: 9
1953M10X11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-358-3630
Ratchet Wrench

123583630
71425110: RNCC: 3 | RNVC: 2
12154: RNCC: 5 | RNVC: 2
12154: RNCC: 5 | RNVC: 2
52044-110: RNCC: 5 | RNVC: 2

14 Oct 2002

5120-12-133-3675
Box Wrench

121333675
23A5-16X11-32: RNCC: 3 | RNVC: 2
41472022: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-159-7559
Cable Type Ratchet Lever Puller

121597559
ZUGHUB3000: RNCC: 3 | RNVC: 2
1918-040000-001: RNCC: 5 | RNVC: 2
1918-040000-001: RNCC: 5 | RNVC: 2
ZUGHUB2500: RNCC: 5 | RNVC: 9
ZUGHUB3000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-372-2783
Quick Adjusting Screw Clamp

123722783
507-060: RNCC: 3 | RNVC: 2

4 Jul 2007

5120-12-337-2241
St Montierwerkzeug

123372241
11.49031-0029: RNCC: 3 | RNVC: 2
112.004: RNCC: 5 | RNVC: 2
11.49031-0029: RNCC: 5 | RNVC: 9
112.004: RNCC: 5 | RNVC: 9

3 Feb 1995

5120-12-155-9403
Female Square Drive Screwdriver Bit Holder

121559403
NM304-23: RNCC: 3 | RNVC: 2
NM304-23: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-2917
Cross Tip Screwdriver

123642917
48301002-TCS: RNCC: 3 | RNVC: 2

8 Sep 2004

5120-12-005-0333

5120-12-378-9921
Socket Wrench Socket

123789921
3700523-514: RNCC: 3 | RNVC: 2
3700523-514: RNCC: 5 | RNVC: 9

10 Jun 2009

5120-12-372-7456
Socket Wrench Handle

123727456
415SG-QR: RNCC: 3 | RNVC: 2
11110030: RNCC: 5 | RNVC: 2

16 Aug 2007

5120-12-380-2485
Hand Roller

123802485
125.583: RNCC: 3 | RNVC: 2

9 Oct 2009

5120-12-365-5403
Cross Tip Screwdriver

123655403
47301000-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-331-4483
Montierhuelse

123314483
566-957: RNCC: 3 | RNVC: 2
5440404: RNCC: 5 | RNVC: 2

5 May 1993

5120-12-134-2681
Socket Wrench

121342681
021M00800: RNCC: 3 | RNVC: 2
VM73473: RNCC: 3 | RNVC: 2
080M01300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-304-1384
Socket Wrench Socket

123041384
907: RNCC: 3 | RNVC: 9

13 Jun 1985

5120-12-337-1487
Montierdorn

123371487
8523068.003: RNCC: 3 | RNVC: 2
0852 3068.003: RNCC: 5 | RNVC: 2

25 Jan 1995

5120-12-347-5573
Seal Inserter

123475573
739 589 03 15 00: RNCC: 3 | RNVC: 2
739589031500: RNCC: 5 | RNVC: 2

6 Jan 1999

5120-12-390-2570
Screwdriver Bit

123902570
04126: RNCC: 3 | RNVC: 2
7041Z-PH1: RNCC: 5 | RNVC: 2
1566741: RNCC: 5 | RNVC: 2
0557 9109: RNCC: 5 | RNVC: 2

23 Oct 2012

5120-12-176-1775
Eintreibwerkzeug

121761775
3027: RNCC: 3 | RNVC: 2
B183 012 233: RNCC: 5 | RNVC: 2

13 Nov 1978

5120-12-381-2796
Socket Wrench Set

123812796
55/10/6: RNCC: 3 | RNVC: 2
644000: RNCC: 5 | RNVC: 2
96050104: RNCC: 5 | RNVC: 2

28 Jan 2010

5120-12-390-2075
Bearing And Bushing Inserter

123902075
F30370047: RNCC: 3 | RNVC: 2

17 Oct 2012

5120-12-392-4360
Electronic Equipment Alignment Tool

123924360
T4845 13: RNCC: 3 | RNVC: 2

7 Jun 2013

5120-12-141-9786
Open End Wrench

121419786
571A203B1IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-147-1305
Socket Wrench Handle Bar

121471305
WZ51: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-021-6826

5120-12-339-0258
Spanner Wrench

123390258
23935: RNCC: 3 | RNVC: 2
ME23935: RNCC: 5 | RNVC: 9

28 Sep 1995

5120-12-380-7736
Socket Wrench

123807736
1370: RNCC: 3 | RNVC: 2

27 Nov 2009

5120-12-382-0864
Screwdriver Handle

123820864
03767: RNCC: 3 | RNVC: 2
282: RNCC: 5 | RNVC: 2

6 May 2010

5120-12-198-5810
Face Spanner Wrench Socket

121985810
5870401083: RNCC: 3 | RNVC: 2
026048: RNCC: 5 | RNVC: 2
5870401073: RNCC: 5 | RNVC: 9
5870401083: RNCC: 5 | RNVC: 9
5870401070: RNCC: 5 | RNVC: 9

14 Feb 1984

5120-12-391-3537
Hand Terminal Crimping Tool

123913537
10641: RNCC: 3 | RNVC: 2

7 Mar 2013

5120-12-347-9222
Elektron Auszieher

123479222
U2-PC-INSERT: RNCC: 3 | RNVC: 2

12 Mar 1999

5120-12-330-7690
Socket Wrench

123307690
88-0109: RNCC: 3 | RNVC: 2

5 Feb 1993

5120-12-306-5376
Ratchet Wrench

123065376
KN30/14-11X155: RNCC: 3 | RNVC: 2
8491840150: RNCC: 3 | RNVC: 2

7 Mar 1986

5120-12-155-9510
Socket Wrench Socket

121559510
NM291-07: RNCC: 3 | RNVC: 2
NM291-07: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-303-3965
Torque Wrench Adapter

123033965
P-896922: RNCC: 3 | RNVC: 2
P896922: RNCC: 5 | RNVC: 2
P896922-403: RNCC: 5 | RNVC: 2
P896922-405: RNCC: 5 | RNVC: 2
MAGERD 2879: RNCC: 5 | RNVC: 2
P896922-407: RNCC: 5 | RNVC: 2

19 Mar 1985

5120-12-122-8100
Tap And Reamer Wrench

121228100
DIN1814-4: RNCC: 2 | RNVC: 2
181-4: RNCC: 3 | RNVC: 2
805D: RNCC: 3 | RNVC: 2
83110: RNCC: 3 | RNVC: 2
7500-4: RNCC: 3 | RNVC: 2
68-4: RNCC: 3 | RNVC: 2
TVA5120-2-263-012: RNCC: 5 | RNVC: 1
TVA5120-2-263-012-1.1.6: RNCC: 5 | RNVC: 2
01.41.49.84: RNCC: 5 | RNVC: 2
5-5X16DIN1814: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-5952
Mechanical Puller

121355952
7700/2: RNCC: 3 | RNVC: 2
20-10: RNCC: 3 | RNVC: 2
4532B: RNCC: 3 | RNVC: 2
JD5120-12-135-5952: RNCC: 3 | RNVC: 2
2240-20: RNCC: 3 | RNVC: 2
48715: RNCC: 5 | RNVC: 2
108211: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-302-4598
Schluessel

123024598
5870240003: RNCC: 3 | RNVC: 2
KDW33/66: RNCC: 5 | RNVC: 9
5870240003: RNCC: 5 | RNVC: 9

29 Dec 1984

5120-12-094-0358

5120-12-312-4118
Pliers

123124118
243DTI: RNCC: 3 | RNVC: 2

30 Dec 1987

5120-12-366-2671
Socket Wrench

123662671
7L0 012 219: RNCC: 3 | RNVC: 2

1 Apr 2005

5120-12-364-6758
Retaining Ring Pliers

123646758
65466031-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-300-4800
Flat Tip Screwdriver

123004800
8002: RNCC: 3 | RNVC: 2
110168: RNCC: 5 | RNVC: 2

4 Aug 1984

5120-12-340-7812
Sealant Dispenser

123407812
2717 MANGUN 200 ML: RNCC: 3 | RNVC: 2

12 Jun 1996

5120-12-310-2899
Hand Tube Flaring Tool

123102899
7208130700: RNCC: 3 | RNVC: 2

6 May 1987

5120-12-301-4556
Craftsman's Tweezers

123014556
NO PRIMARY REF 12-301-4556: RNCC: 3 | RNVC: 2
5469BK: RNCC: 5 | RNVC: 9

16 Oct 1984

5120-12-179-9682
Lasche

121799682
80996220017: RNCC: 3 | RNVC: 2
143210-1: RNCC: 5 | RNVC: 2
80.99622-0017: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-140-9229
Oelfueh Druckstueck

121409229
4621B: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-370-6338
Socket Wrench

123706338
980422: RNCC: 3 | RNVC: 2
01.89.66.51: RNCC: 5 | RNVC: 2

4 Dec 2006

5120-12-198-7378
Socket Head Screw Key

121987378
1997LM14: RNCC: 3 | RNVC: 2

22 Feb 1984

5120-12-372-2440
Montage- Hebel

123722440
105-45041W6: RNCC: 3 | RNVC: 2

29 Jun 2007

5120-12-194-3674
Eindrueckwerkzeugsa

121943674
S4-4600370: RNCC: 3 | RNVC: 2
S4-4600370: RNCC: 5 | RNVC: 9

26 Oct 1982

5120-12-153-5222
Schwingh Klemmhebel

121535222
CH1773-107NM: RNCC: 3 | RNVC: 2
561589001600: RNCC: 5 | RNVC: 2
5615890016/00: RNCC: 5 | RNVC: 2
CH1773-107NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-150-0190
Einstampfvorrichtun

121500190
74-75-795V1: RNCC: 3 | RNVC: 2
7475795V1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-186-2859
Open End Box Wrench

121862859
24-27X36: RNCC: 3 | RNVC: 2
00.27.99.83: RNCC: 5 | RNVC: 2
6410.141.000.029: RNCC: 5 | RNVC: 2
0005812036: RNCC: 5 | RNVC: 2
41082736: RNCC: 5 | RNVC: 2
91635029: RNCC: 5 | RNVC: 2
24141082736: RNCC: 5 | RNVC: 9

13 Dec 1980

5120-12-390-4301
Bearing And Bushing Remover

123904301
F0095804: RNCC: 3 | RNVC: 2

13 Nov 2012

5120-12-354-0316
Seal Inserter

123540316
750589001500: RNCC: 3 | RNVC: 2
750 589 00 15 00: RNCC: 5 | RNVC: 2

29 May 2001

5120-12-323-7583
Lager- Und Einsatz

123237583
99370366: RNCC: 3 | RNVC: 2
370 366: RNCC: 5 | RNVC: 2

13 Dec 1990

5120-12-186-7332
Abstandsstueck

121867332
99366623: RNCC: 3 | RNVC: 2
420084: RNCC: 5 | RNVC: 9
420084: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-342-2580
Seal Inserter

123422580
5870048089: RNCC: 3 | RNVC: 2

13 Jan 1997

5120-12-367-8661
Socket Head Screw Key

123678661
71117667948: RNCC: 3 | RNVC: 2
71117667948: RNCC: 5 | RNVC: 2

25 Oct 2005

5120-12-123-5133
Open End Wrench

121235133
NO PRIMARY REF 12-123-5133: RNCC: 3 | RNVC: 2
40015055: RNCC: 5 | RNVC: 9
1-50X55: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-3816
Mechanical Puller Attachment

123403816
02.4306.14.00: RNCC: 3 | RNVC: 2

2 Apr 1996

5120-12-317-0199
Bearing And Bushing Inserter

123170199
1000042-192700: RNCC: 3 | RNVC: 2
MAGERD 7678: RNCC: 5 | RNVC: 9

3 Mar 1989

5120-12-194-9521
Spanner Wrench

121949521
1X56136497: RNCC: 3 | RNVC: 2

21 Dec 1982

5120-12-139-2496
Einbauvorrichtung

121392496
009M01100: RNCC: 3 | RNVC: 2
VM55834: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-385-2401
Tack Claw

123852401
50.000.061: RNCC: 3 | RNVC: 2

12 May 2011

5120-12-130-6247
Open End Wrench

121306247
LG143778: RNCC: 3 | RNVC: 2
WZ50: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-193-6670

5120-12-156-9799
Hand Hammer

121569799
1154-00-00: RNCC: 3 | RNVC: 2
TK-BA24-8465-056-BILD1: RNCC: 5 | RNVC: 2
285: RNCC: 5 | RNVC: 9
TK-BA24-8465-056-A: RNCC: 5 | RNVC: 9
TK-BA54-8465-056-BILD1: RNCC: 5 | RNVC: 9
TK8465-021-1: RNCC: 5 | RNVC: 9
TK8465-056-A: RNCC: 5 | RNVC: 9
8465-0058FIG1: RNCC: 5 | RNVC: 9
TL8465-0058FIG1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-307-4538
Box Wrench

123074538
NO PRIMARY REF 12-307-4538: RNCC: 3 | RNVC: 2
101-19/32X11/16: RNCC: 5 | RNVC: 2
41443538: RNCC: 5 | RNVC: 2
220 A.F.-CS-19/32X11/16: RNCC: 5 | RNVC: 9
238 031: RNCC: 5 | RNVC: 9

19 Jun 1986

5120-12-182-2969
Open End Wrench

121822969
TL5120-0101-155: RNCC: 2 | RNVC: 2
104932: RNCC: 5 | RNVC: 9
1931M17: RNCC: 5 | RNVC: 9
C 5702 429 EC: RNCC: 5 | RNVC: 9
C 5702 429 EC: RNCC: 5 | RNVC: 9

23 Jan 1980

5120-12-332-8200
Craftsman's Tweezers

123328200
5-131: RNCC: 3 | RNVC: 2
5465: RNCC: 3 | RNVC: 2
108512: RNCC: 5 | RNVC: 2

23 Sep 1993

5120-12-126-1695
Mechanical Puller

121261695
4520M: RNCC: 3 | RNVC: 2
220: RNCC: 3 | RNVC: 2
145-20: RNCC: 3 | RNVC: 2
108136: RNCC: 5 | RNVC: 2
1081362: RNCC: 5 | RNVC: 2
7882-401: RNCC: 5 | RNVC: 2
7882401: RNCC: 5 | RNVC: 2
4520: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-7090
Mechanical Puller

121817090
264-594: RNCC: 3 | RNVC: 2

12 Dec 1979

5120-12-129-8796
Abziehvorrichtung

121298796
0681200005: RNCC: 3 | RNVC: 2
EF2583A: RNCC: 5 | RNVC: 2
KDAL5473: RNCC: 5 | RNVC: 9
0681200005: RNCC: 5 | RNVC: 9
EF2583A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-339-4726
Gl Montierwerkzeug

123394726
10135: RNCC: 2 | RNVC: 2
10135: RNCC: 3 | RNVC: 2

27 Nov 1995

5120-12-364-9578
Socket Wrench

123649578
T4840XESD50: RNCC: 3 | RNVC: 2

18 Nov 2004

5120-12-330-0048
Mechanical Puller

123300048
0852 0362: RNCC: 3 | RNVC: 2
8520362: RNCC: 5 | RNVC: 2

21 Oct 1992

5120-12-330-3656
Socket Wrench

123303656
2653-991200.15: RNCC: 2 | RNVC: 2
2653-991200.15: RNCC: 3 | RNVC: 2

8 Dec 1992

5120-12-312-7992
Lager- Und Einsatz

123127992
1X56115486: RNCC: 3 | RNVC: 2
V115486: RNCC: 5 | RNVC: 2
1X56 115 486: RNCC: 5 | RNVC: 2

5 Feb 1988

5120-12-174-9237
Schluesseleinsatzsa

121749237
NO PRIMARY REF 12-174-9237: RNCC: 3 | RNVC: 2
149438: RNCC: 5 | RNVC: 9
157635: RNCC: 5 | RNVC: 9
4115-2-1-4: RNCC: 5 | RNVC: 9
4115Z2D: RNCC: 5 | RNVC: 9

7 Aug 1978

5120-12-198-2170
We Montierwerkzeug

121982170
52-59205-3: RNCC: 3 | RNVC: 2

2 Jan 1984

5120-12-123-5977
Socket Wrench Socket

121235977
53A3-4: RNCC: 3 | RNVC: 2
03440040: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-170-9622

5120-12-129-5864

5120-12-120-9360

5120-12-367-1083
Face Spanner Wrench Socket

123671083
0927728: RNCC: 3 | RNVC: 2

11 Jul 2005

5120-12-363-0231
Socket Wrench Socket

123630231
001589790900: RNCC: 3 | RNVC: 2

27 Apr 2004

5120-12-176-0038
Cross Tip Screwdriver

121760038
C8078-1: RNCC: 3 | RNVC: 2
292-1X80: RNCC: 5 | RNVC: 2
148652: RNCC: 5 | RNVC: 2
C8078-1: RNCC: 5 | RNVC: 2

2 Nov 1978

5120-12-179-2014
Zentriervorrichtung

121792014
2-225: RNCC: 3 | RNVC: 2

15 Jun 1979

5120-12-310-1229
Cross Tip Screwdriver

123101229
8078PZD-VDE-3: RNCC: 3 | RNVC: 2

8 Apr 1987

5120-12-310-5915
Lamp Extractor

123105915
FZ1.90900.001: RNCC: 3 | RNVC: 2
1.90900.001: RNCC: 5 | RNVC: 2

4 Jun 1987

5120-12-321-1211
Piston Ring Compressor

123211211
62196400: RNCC: 3 | RNVC: 2

29 Mar 1990

5120-12-364-9577
Socket Wrench

123649577
T4840XESD45: RNCC: 3 | RNVC: 2

18 Nov 2004

5120-12-050-0669

5120-12-358-1612
Socket Wrench Set

123581612
96513110: RNCC: 3 | RNVC: 2
965 13 110: RNCC: 5 | RNVC: 2

20 Sep 2002

5120-12-333-5661
Seal Inserter

123335661
1843301: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-373-8788
Pliers

123738788
0301160: RNCC: 3 | RNVC: 2
4003773013235: RNCC: 5 | RNVC: 2

14 Dec 2007

5120-12-070-0138

5120-12-198-5359
Socket Wrench

121985359
1945NB-M7: RNCC: 3 | RNVC: 2
105333: RNCC: 5 | RNVC: 2
1945NB-M-7MM: RNCC: 5 | RNVC: 2

7 Feb 1984

5120-12-313-0857
Torque Wrench Adapter

123130857
P-896438-417: RNCC: 3 | RNVC: 2
P896438-417: RNCC: 5 | RNVC: 2

3 Mar 1988

5120-12-187-0500
Ratchet Wrench

121870500
CF 463 910: RNCC: 2 | RNVC: 2
CF 463 910 -R: RNCC: 3 | RNVC: 2
CF 463 910 -R: RNCC: 3 | RNVC: 2
CF4639100R: RNCC: 5 | RNVC: 2
CF 463 910 AR: RNCC: 5 | RNVC: 2
CF463910AR: RNCC: 5 | RNVC: 2
CF4639100R: RNCC: 5 | RNVC: 2
CF463910AR: RNCC: 5 | RNVC: 2
CF 463 910 AR: RNCC: 5 | RNVC: 2
CF 463 910 AR: RNCC: 5 | RNVC: 2

25 Feb 1981

5120-12-170-8656
Spanner Wrench

121708656
342095: RNCC: 3 | RNVC: 2

17 Aug 1977

5120-12-199-7906
Tool

121997906
SP691: RNCC: 3 | RNVC: 2
SP691: RNCC: 5 | RNVC: 9

30 May 1984

5120-12-181-9736
Druckstempel

121819736
VW409: RNCC: 3 | RNVC: 9

28 Dec 1979

5120-12-144-8199
Mechanical Puller

121448199
63202: RNCC: 3 | RNVC: 2
63202: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-310-6379
Spanner Wrench

123106379
60074-645: RNCC: 3 | RNVC: 2

11 Jun 1987

5120-12-380-2846
Screwdriver Bit

123802846
00580: RNCC: 3 | RNVC: 2
269-PH0-PH1: RNCC: 5 | RNVC: 2

15 Oct 2009

5120-12-090-6322

5120-12-161-5809
Flat Tip Screwdriver

121615809
1712180111: RNCC: 3 | RNVC: 2
17121 80111: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-7259
Spanner Wrench

121297259
6153156: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-186-7362
Mechanical Puller

121867362
99347048: RNCC: 3 | RNVC: 2
450020: RNCC: 5 | RNVC: 9
450020: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-315-9048
Driftpin

123159048
F30140348: RNCC: 3 | RNVC: 2
F30140348: RNCC: 5 | RNVC: 2
F30140348: RNCC: 5 | RNVC: 2

7 Dec 1988

5120-12-388-0608
Open End Box Wrench

123880608
00497101280: RNCC: 3 | RNVC: 2

22 Feb 2012

5120-12-340-3277
Hand Terminal Crimping Tool

123403277
5106.021.01.01: RNCC: 3 | RNVC: 2

26 Mar 1996

5120-12-139-8573

5120-12-159-0042
Torque Wrench Adapter

121590042
2768-1: RNCC: 3 | RNVC: 2
000589320700: RNCC: 5 | RNVC: 2
5711620001: RNCC: 5 | RNVC: 2
13402: RNCC: 5 | RNVC: 2
2768: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-365-7817
Craftsman's Tweezers

123657817
T2340: RNCC: 3 | RNVC: 2

2 Feb 2005

5120-12-385-7935
Ratchet Wrench Set

123857935
7.0490: RNCC: 3 | RNVC: 2

8 Jul 2011

5120-12-187-4220
Vise Jaw Caps

121874220
06801010: RNCC: 3 | RNVC: 9

8 Apr 1981

5120-12-388-7586
Ratchet Wrench

123887586
522.2427: RNCC: 3 | RNVC: 2

19 Apr 2012

5120-12-166-2578
Socket Wrench

121662578
05891: RNCC: 3 | RNVC: 2
05891: RNCC: 5 | RNVC: 9

19 Aug 1976

5120-12-171-0074
Spanner Wrench

121710074
213187: RNCC: 3 | RNVC: 2
213187: RNCC: 5 | RNVC: 9

1 Sep 1977

5120-12-134-2685
Einpre Druckbuchse

121342685
016M07300: RNCC: 3 | RNVC: 2
VM76370: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-024-1250

5120-12-335-4438
Mechanical Puller

123354438
0852 0261: RNCC: 3 | RNVC: 2
8520261: RNCC: 5 | RNVC: 2

18 Aug 1994

5120-12-300-8824
Drive Pin Punch

123008824
4208552: RNCC: 3 | RNVC: 2

7 Sep 1984

5120-12-304-5233
Swivel Knob Jeweler's Screwdriver

123045233
52714-100: RNCC: 3 | RNVC: 2
52714/2: RNCC: 5 | RNVC: 2

26 Jul 1985

5120-12-183-9686
Socket Wrench Socket

121839686
DIN3124-14X6,3: RNCC: 2 | RNVC: 2
91654376: RNCC: 5 | RNVC: 2
230/743/2: RNCC: 5 | RNVC: 2
A6700DM-14: RNCC: 5 | RNVC: 2
8812386011: RNCC: 5 | RNVC: 2
91619145: RNCC: 5 | RNVC: 2
6700DM14: RNCC: 5 | RNVC: 9
6700DM-14: RNCC: 5 | RNVC: 9

7 Jun 1980

5120-12-336-1004
Spanner Wrench

123361004
628100-90/6: RNCC: 3 | RNVC: 2
885182577: RNCC: 5 | RNVC: 2
885335314: RNCC: 5 | RNVC: 2
62810-90/6: RNCC: 5 | RNVC: 9

24 Oct 1994

5120-12-313-4266
Zentrier- Ring

123134266
80996040071: RNCC: 3 | RNVC: 2
80.99604.0071: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-385-4771
Retaining Ring Pliers

123854771
500.1035: RNCC: 3 | RNVC: 2
391129141107: RNCC: 6 | RNVC: 9

7 Jun 2011

5120-12-176-1120
Schluessel

121761120
2012: RNCC: 3 | RNVC: 2

9 Nov 1978

5120-12-021-2587

5120-12-137-0982

5120-12-363-8861
Bearing And Bushing Inserter And Remover

123638861
T670P5001226: RNCC: 3 | RNVC: 2

3 Aug 2004

5120-12-142-6334
Einsteck Schluessel

121426334
144: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-385-0173
Torque Screwdriver

123850173
775/30: RNCC: 3 | RNVC: 2
51060030: RNCC: 5 | RNVC: 2
10339058: RNCC: 6 | RNVC: 9

19 Apr 2011

5120-12-341-0015
Hand Hammer

123410015
1680: RNCC: 3 | RNVC: 2
5119350016: RNCC: 3 | RNVC: 2
00.73.10.35: RNCC: 5 | RNVC: 2
5119.35-450G: RNCC: 5 | RNVC: 2

16 Jul 1996

5120-12-176-5015
Torque Wrench Multiplier

121765015
1X56 136 858-1: RNCC: 3 | RNVC: 2
1X56136858-1: RNCC: 5 | RNVC: 9

30 Nov 1978

5120-12-339-6003
Mechanical Puller

123396003
80996020118: RNCC: 3 | RNVC: 2

11 Dec 1995

5120-12-344-6444
Seal Inserter

123446444
99374253: RNCC: 3 | RNVC: 2

19 Nov 1997

5120-12-171-8270
Fuse Puller

121718270
2215702: RNCC: 3 | RNVC: 2

18 Nov 1977

5120-12-344-0105
Socket Wrench Handle Bar

123440105
10110017: RNCC: 3 | RNVC: 2

28 Aug 1997

5120-12-376-7015
Flat Tip Screwdriver

123767015
0801020C: RNCC: 3 | RNVC: 2
NNSR1020: RNCC: 5 | RNVC: 2
38411: RNCC: 5 | RNVC: 2

29 Oct 2008

5120-12-376-5153
Socket Head Screw Key

123765153
43702: RNCC: 3 | RNVC: 2

10 Oct 2008

5120-12-170-0647

5120-12-372-6273
Hand Terminal Crimping Tool

123726273
975206: RNCC: 3 | RNVC: 2
4003773025474: RNCC: 5 | RNVC: 2

6 Aug 2007

5120-12-041-5743

5120-12-312-1890
Preformed Packing Inserter

123121890
105-45041W15: RNCC: 3 | RNVC: 2

1 Dec 1987

5120-12-387-7404
Centering Ring

123877404
Y4341124: RNCC: 3 | RNVC: 2

27 Jan 2012

5120-12-390-4019
Ejecti Guide Plate

123904019
F6784954: RNCC: 3 | RNVC: 2

8 Nov 2012

5120-12-156-1598
Box Wrench

121561598
NM286-01: RNCC: 3 | RNVC: 2
NM286-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-9520
Open End Wrench

121299520
4060177: RNCC: 3 | RNVC: 2
R06296: RNCC: 3 | RNVC: 2
R6296: RNCC: 5 | RNVC: 2
4060-177: RNCC: 5 | RNVC: 2
R06296: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-6051
Hand Hammer

121746051
TL5120-0126-A1: RNCC: 2 | RNVC: 2
3067034: RNCC: 3 | RNVC: 2
3067030: RNCC: 5 | RNVC: 9
206730: RNCC: 5 | RNVC: 9

13 Jul 1978

5120-12-126-1417
Hand Rivet Set

121261417
DIN6434-B6: RNCC: 2 | RNVC: 2
584 006: RNCC: 3 | RNVC: 2
250-6: RNCC: 5 | RNVC: 2
B6DIN6434: RNCC: 5 | RNVC: 2
2551-6: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-384-7471
Seal Inserter

123847471
F6376602: RNCC: 3 | RNVC: 2

24 Mar 2011

5120-12-380-6141
Socket Wrench Extension

123806141
F6781214: RNCC: 3 | RNVC: 2

12 Nov 2009

5120-12-164-2572
Spanner Wrench

121642572
1000019-6300: RNCC: 2 | RNVC: 2
1000019-6300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-092-2302

5120-12-179-2899
Ratchet Wrench

121792899
R6SKT55: RNCC: 3 | RNVC: 2

20 Jun 1979

5120-12-319-4527
Lager- Und Einsatz

123194527
99374195: RNCC: 3 | RNVC: 2

3 Oct 1989

5120-12-339-9184
Spanner Wrench

123399184
F30276211: RNCC: 3 | RNVC: 2
F3 0276211: RNCC: 5 | RNVC: 2

1 Feb 1996

5120-12-370-5508
Craftsman's Tweezers

123705508
922204: RNCC: 3 | RNVC: 2
4003773054665: RNCC: 5 | RNVC: 2
00.19.00.57: RNCC: 5 | RNVC: 2

21 Nov 2006

5120-12-139-2525
Schluessel

121392525
VM70938: RNCC: 3 | RNVC: 2
014M07600: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-363-1500
Blindni Mundstueck

123631500
7202415: RNCC: 3 | RNVC: 2

6 May 2004

5120-12-379-0871
Hand Hammer

123790871
616800: RNCC: 3 | RNVC: 2
28498: RNCC: 5 | RNVC: 2
391319122510: RNCC: 6 | RNVC: 9

22 Jun 2009

5120-12-137-6303
Socket Wrench

121376303
5081: RNCC: 3 | RNVC: 2
UE5081: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-382-5878
Torque Wrench Adapter

123825878
58250010-TCS: RNCC: 3 | RNVC: 2

13 Jul 2010

5120-12-394-2615
Hydra Removal Tool

123942615
CTP40916G001: RNCC: 3 | RNVC: 2

14 Nov 2013

5120-12-393-6888
Mechanical Puller Body

123936888
A-0261-003-02: RNCC: 3 | RNVC: 2

2 Oct 2013

5120-12-356-8258
Lifting Pneumatic Bag

123568258
139 02 000: RNCC: 3 | RNVC: 2
TYP V3: RNCC: 5 | RNVC: 2

9 Apr 2002

5120-12-370-4621
Socket Wrench

123704621
110490: RNCC: 3 | RNVC: 2
0110490: RNCC: 5 | RNVC: 2

9 Nov 2006

5120-12-156-1516
Hand Hammer

121561516
NM226-10: RNCC: 3 | RNVC: 2
NM226-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-6680
Socket Wrench Socket

121206680
50-6-19-32: RNCC: 3 | RNVC: 2
00506326: RNCC: 5 | RNVC: 2
03430035: RNCC: 5 | RNVC: 9
52A19-32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-348-6090
Flat Tip Screwdriver

123486090
660300-7: RNCC: 3 | RNVC: 2
66020-6,5: RNCC: 5 | RNVC: 9

26 Jul 1999

5120-12-146-5267

5120-12-365-1296
Screwdriver Bit

123651296
F30371457: RNCC: 3 | RNVC: 2
M55.093.024: RNCC: 5 | RNVC: 2
(241)A4249M55.093.024: RNCC: 8 | RNVC: 2

1 Dec 2004

5120-12-389-0954
Mounting Lever

123890954
07145824: RNCC: 3 | RNVC: 2

25 May 2012

5120-12-331-7654
Mechanical Puller Attachment

123317654
20041: RNCC: 3 | RNVC: 2
80996350001: RNCC: 5 | RNVC: 2
80.99635.0001: RNCC: 5 | RNVC: 9

18 Jun 1993

5120-12-363-9686
Bearing And Bushing Inserter

123639686
T671P5002119: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-314-9264
Screw Thread Insert Inserter

123149264
6100100.00: RNCC: 3 | RNVC: 2
601100: RNCC: 5 | RNVC: 2

27 Aug 1988

5120-12-390-7525
Socket Head Screw Key

123907525
43150010-TCS: RNCC: 3 | RNVC: 2

7 Dec 2012

5120-12-184-7143
Drive Pin Punch

121847143
0852 2032: RNCC: 3 | RNVC: 2
8522032: RNCC: 5 | RNVC: 2

14 Aug 1980

5120-12-140-9194
Gummi Einfuehrkegel

121409194
4634: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-127-4160

5120-12-358-7168
Bearing And Bushing Inserter

123587168
80996010167: RNCC: 3 | RNVC: 2
80.99601.0167: RNCC: 5 | RNVC: 2

7 Nov 2002

5120-12-010-9619

5120-12-365-9725
Socket Wrench Screwdriver Attachment

123659725
01120008-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-364-5980
Bearing And Bushing Inserter

123645980
321589051500: RNCC: 3 | RNVC: 2

13 Oct 2004

5120-12-358-8977
Electrical Contact Remover

123588977
80996060424: RNCC: 3 | RNVC: 2

26 Nov 2002

5120-12-025-8799

5120-12-181-5283
Torque Wrench Adapter

121815283
R809237: RNCC: 3 | RNVC: 2
RSBH24MM: RNCC: 5 | RNVC: 2
809237: RNCC: 5 | RNVC: 2
SBH24MM: RNCC: 5 | RNVC: 9
809237: RNCC: 5 | RNVC: 9

29 Nov 1979

5120-12-195-4573
Socket Wrench Socket

121954573
1X56 136 930: RNCC: 3 | RNVC: 2
1X56 136 930: RNCC: 5 | RNVC: 9
1X56136930: RNCC: 5 | RNVC: 9

28 Feb 1983

5120-12-134-2741
Schwin Klemmstueck

121342741
051M01300: RNCC: 3 | RNVC: 2
VM72752: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-323-4192
Mechanical Puller Attachment

123234192
01TC35339: RNCC: 3 | RNVC: 2

23 Nov 1990

5120-12-343-5148
Socket Wrench

123435148
140589030900: RNCC: 3 | RNVC: 2

30 Jun 1997

5120-12-369-5104
Caulking Gun Nozzle

123695104
983441: RNCC: 3 | RNVC: 2

14 Jul 2006

5120-12-368-1241
Mechanical Puller Attachment

123681241
06004054: RNCC: 3 | RNVC: 2

12 Dec 2005

5120-12-023-2508

5120-12-357-7613
Terminal Crimping Tool Contact Positioner

123577613
5300.780.010.000: RNCC: 3 | RNVC: 2

19 Jul 2002

5120-12-139-8571

5120-12-326-3416
Torque Wrench

123263416
54.0070.124.02: RNCC: 3 | RNVC: 2

3 Sep 1991

5120-12-335-4087
Mechanical Puller

123354087
0851 6848: RNCC: 3 | RNVC: 2
8516848: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-030-0091

5120-12-194-9514
Spanner Wrench

121949514
1X56099047: RNCC: 3 | RNVC: 2

21 Dec 1982

5120-12-332-8435
Spanner Wrench

123328435
9131362: RNCC: 3 | RNVC: 2

27 Sep 1993

5120-12-126-3111
Pin Vise

121263111
51003210: RNCC: 3 | RNVC: 2
GW4103-160: RNCC: 3 | RNVC: 2
576D203-160: RNCC: 3 | RNVC: 2
310170: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-140-4943

5120-12-149-4915
Abgasventi Adapter

121494915
310-816B0000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-393-7715
Caulking Gun Nozzle

123937715
050882: RNCC: 3 | RNVC: 2

9 Oct 2013

5120-12-363-0360
Mechanical Puller Attachment

123630360
01TC33093: RNCC: 3 | RNVC: 2
01TC33093: RNCC: 5 | RNVC: 2

28 Apr 2004

5120-12-388-1084
Hand Storage Battery Carrier

123881084
905 902 018: RNCC: 3 | RNVC: 2

24 Feb 2012

5120-12-020-5446

5120-12-150-4487
Abzie Druckspindel

121504487
2360-264031.00.0: RNCC: 2 | RNVC: 2
2360-264031.00.0: RNCC: 3 | RNVC: 2
2360-264031.00.0: RNCC: 5 | RNVC: 2
2360-264031-00-0: RNCC: 5 | RNVC: 2
2360-264031-00-0: RNCC: 5 | RNVC: 2
2360-264031-00-0: RNCC: 5 | RNVC: 9
2360-264031.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-350-0584
Plier Wrench

123500584
5994507000: RNCC: 3 | RNVC: 2

8 Feb 2000

5120-12-394-1838
Screwdriver Bit Set And Handle

123941838
05057110001: RNCC: 3 | RNVC: 2

8 Nov 2013

5120-12-140-1206
Kolbenst Auszieher

121401206
U04162: RNCC: 3 | RNVC: 2
U04162: RNCC: 5 | RNVC: 9
U4162: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-3157
Machinist's Scriber

123643157
77100000-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-331-4479
Craftsman's Tweezers

123314479
5440101: RNCC: 3 | RNVC: 2

5 May 1993

5120-12-311-2407
Fixed Open End Wrench Set

123112407
100/101M: RNCC: 3 | RNVC: 2

7 Aug 1987

5120-12-333-7287
Hydraulic Jack Handle

123337287
04764030: RNCC: 3 | RNVC: 2
4764030: RNCC: 5 | RNVC: 2
4764030: RNCC: 5 | RNVC: 2

28 Jan 1994

5120-12-364-6774
Drive Pin Punch

123646774
70060008-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-365-9182
Socket Wrench

123659182
T4840X 15: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-174-0876
Socket Wrench

121740876
0005811701: RNCC: 3 | RNVC: 2

6 Jun 1978

5120-12-305-4890
Bearing And Bushing Inserter

123054890
314589011500: RNCC: 3 | RNVC: 2

13 Nov 1985

5120-12-305-3716
Montierhuelse

123053716
0852 8777: RNCC: 3 | RNVC: 2
8528777: RNCC: 5 | RNVC: 2
MAGERD 1155: RNCC: 5 | RNVC: 9

28 Oct 1985

5120-12-390-2460
Fuel Injection Nozzle Extractor

123902460
F6789889: RNCC: 3 | RNVC: 2

22 Oct 2012

5120-12-357-7527
Bearing And Bushing Remover

123577527
9997001-991010.000.0: RNCC: 3 | RNVC: 2

18 Jul 2002

5120-12-153-4994
Piston Ring Compressor

121534994
CH1920-30: RNCC: 3 | RNVC: 2
6.0871.05.1.0004: RNCC: 5 | RNVC: 9
CH1920-30: RNCC: 5 | RNVC: 9
6-0871-05-1-0004: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-4705
Bung Wrench

121204705
3GR0SZ: RNCC: 3 | RNVC: 2
247AANH1: RNCC: 5 | RNVC: 2
5120-058: RNCC: 5 | RNVC: 9
TL5120-0058: RNCC: 5 | RNVC: 9
5120-0058: RNCC: 5 | RNVC: 9
5120-40072: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-121-1192
Swivel Knob Jeweler's Screwdriver Set

121211192
NO PRIMARY REF 12-121-1192: RNCC: 3 | RNVC: 2
111800: RNCC: 5 | RNVC: 2
B146: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-4117
Socket Wrench Screwdriver Attachment

121944117
TL5120-0102-080: RNCC: 2 | RNVC: 2
071512705: RNCC: 3 | RNVC: 2
2051-5: RNCC: 3 | RNVC: 2
49-5: RNCC: 3 | RNVC: 2
DIN7422-5-10: RNCC: 5 | RNVC: 1
02050005: RNCC: 5 | RNVC: 2
63750-5: RNCC: 5 | RNVC: 2
637600-5: RNCC: 5 | RNVC: 2
49 5: RNCC: 5 | RNVC: 9

3 Nov 1982

5120-12-372-0207
Socket Wrench Socket

123720207
4550-3: RNCC: 3 | RNVC: 2
MAN80.99603-0309: RNCC: 5 | RNVC: 2
80.99603-0309: RNCC: 5 | RNVC: 2
80996030309: RNCC: 5 | RNVC: 2

12 Jun 2007

5120-12-194-6448
Socket Wrench

121946448
68 02369: RNCC: 3 | RNVC: 9
6802369: RNCC: 5 | RNVC: 9

23 Nov 1982

5120-12-362-4721
Combination Box And Open End Wrench

123624721
54.0084.960.52: RNCC: 3 | RNVC: 2
13-18: RNCC: 5 | RNVC: 2

27 Feb 2004

5120-12-196-7638
Mechanical Puller Attachment

121967638
1120-31547W2.01: RNCC: 3 | RNVC: 2

15 Aug 1983

5120-12-358-8661
Mechanical Puller

123588661
80996010169: RNCC: 3 | RNVC: 2

22 Nov 2002

5120-12-362-0829
Mechanical Puller

123620829
0008305-801: RNCC: 3 | RNVC: 2

7 Jan 2004

5120-12-368-8279
Socket Wrench Screwdriver Attachment

123688279
3245-TXL 55: RNCC: 3 | RNVC: 2
00.50.37.90: RNCC: 5 | RNVC: 2

26 Apr 2006

5120-12-189-5912
Socket Wrench Handle Bar

121895912
4900-142-000-01: RNCC: 2 | RNVC: 2
7835009: RNCC: 3 | RNVC: 2
7835-009: RNCC: 5 | RNVC: 2
4900-142-000-01: RNCC: 5 | RNVC: 2
4900-142-000-01: RNCC: 5 | RNVC: 9
4900142-000-01: RNCC: 5 | RNVC: 9

7 Oct 1981

5120-12-140-2765
Drive Pin Punch

121402765
2811-004: RNCC: 3 | RNVC: 2
2811004: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-196-3718
Pipe Wrench

121963718
129: RNCC: 3 | RNVC: 2
129005: RNCC: 5 | RNVC: 2
181032: RNCC: 5 | RNVC: 9
1066: RNCC: 5 | RNVC: 9

30 Jun 1983

5120-12-140-1150

5120-12-123-5107
Open End Wrench

121235107
0010810C: RNCC: 3 | RNVC: 2
905005: RNCC: 5 | RNVC: 9
103177: RNCC: 5 | RNVC: 9
C900M8X10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-349-3925
Socket Wrench Screwdriver Attachment

123493925
54IC14: RNCC: 3 | RNVC: 2
03070014: RNCC: 5 | RNVC: 2

9 Nov 1999

5120-12-384-1656
Rotat Holding Tool

123841656
7092647: RNCC: 3 | RNVC: 2

28 Jan 2011

5120-12-364-3461
Combination Box And Open End Wrench

123643461
40094545-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-314-7339
Hyd Ausbauwerkzeug

123147339
4987034: RNCC: 3 | RNVC: 2

3 Aug 1988

5120-12-315-4357
Seal Inserter

123154357
4987040: RNCC: 3 | RNVC: 2

21 Oct 1988

5120-12-314-7473
Einsetz- Und Auszie

123147473
530009: RNCC: 2 | RNVC: 9

5 Aug 1988

5120-12-390-7392
Torque Wrench Adapter

123907392
58611034-TCS: RNCC: 3 | RNVC: 2

6 Dec 2012

5120-12-335-0554
Seal Inserter

123350554
F30276066: RNCC: 3 | RNVC: 2

18 Jul 1994

5120-12-345-3067
Mechanical Puller

123453067
F0 098339: RNCC: 3 | RNVC: 2

2 Mar 1998

5120-12-023-0175

5120-12-335-2899
Bearing And Bushing Remover

123352899
0851 6864: RNCC: 3 | RNVC: 2
8516864: RNCC: 5 | RNVC: 2

4 Aug 1994

5120-12-010-0972

5120-12-342-6549
Schluessel

123426549
VG95211-ML-123426549: RNCC: 2 | RNVC: 2
P-875221-403: RNCC: 3 | RNVC: 2
P875221-403: RNCC: 5 | RNVC: 2

12 Mar 1997

5120-12-150-2746
Motor Blindflansch

121502746
23176-264580.00.0: RNCC: 2 | RNVC: 2
23176-264580-00-0: RNCC: 2 | RNVC: 2
23176-264580-00-0: RNCC: 5 | RNVC: 2
23176-264580.00.0: RNCC: 5 | RNVC: 2
23176-264580-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-134-2757
Schluessel

121342757
027M08100: RNCC: 3 | RNVC: 2
023M11600: RNCC: 5 | RNVC: 2
VM66533: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-325-0812
Spanner Wrench

123250812
52820-W16: RNCC: 3 | RNVC: 2

30 Apr 1991

5120-12-334-0329
Hand Scissors Jack

123340329
14 32 236: RNCC: 3 | RNVC: 2

11 Mar 1994

5120-12-385-5403
Spanner Wrench

123855403
F30375694: RNCC: 3 | RNVC: 2

14 Jun 2011

5120-12-163-6088
Einpreszwerkzeug

121636088
105-31501W2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-3048

5120-12-390-7169
Feder Spannersatz

123907169
7118953: RNCC: 3 | RNVC: 2

5 Dec 2012

5120-12-336-5083
Ge Montierwerkzeug

123365083
0852 3020: RNCC: 3 | RNVC: 2
8523020: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-357-7363
Ge Montierwerkzeug

123577363
F6279434: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-388-5660
Spanner Wrench

123885660
901589010700: RNCC: 3 | RNVC: 2

2 Apr 2012

5120-12-321-6129
Face Spanner Wrench Socket

123216129
272.369 554: RNCC: 2 | RNVC: 2
272.369 554: RNCC: 3 | RNVC: 2
CTWH-KPT16R: RNCC: 5 | RNVC: 2

7 Jun 1990

5120-12-313-3173
Fl Montierwerkzeug

123133173
54 9410 81: RNCC: 3 | RNVC: 2

22 Mar 1988

5120-12-367-1086
Bearing And Bushing Inserter

123671086
0907901: RNCC: 3 | RNVC: 2

11 Jul 2005

5120-12-347-3113
Montierdorn

123473113
0852 0318: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-12-004-0067

5120-12-133-6182
Open End Wrench

121336182
3114-32: RNCC: 3 | RNVC: 2
790014877: RNCC: 5 | RNVC: 2
61280-32: RNCC: 5 | RNVC: 2
612800-32: RNCC: 5 | RNVC: 2
667099: RNCC: 5 | RNVC: 2

26 Apr 1984

5120-12-150-1560
Druckf Einsetzstab

121501560
C22407-A9-C15: RNCC: 3 | RNVC: 2
C22407A9C15: RNCC: 5 | RNVC: 2
TFS70-12227: RNCC: 5 | RNVC: 2
TFS70-12227: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-139-3140

5120-12-361-5321
Hand Terminal Crimping Tool

123615321
09990000021: RNCC: 3 | RNVC: 2
313-6607: RNCC: 5 | RNVC: 2

14 Oct 2003

5120-12-315-5354
Seal Inserter

123155354
0009419348: RNCC: 3 | RNVC: 2

3 Nov 1988

5120-12-385-3107
Hand Hammer

123853107
53.000.035: RNCC: 3 | RNVC: 2
53.000.035: RNCC: 5 | RNVC: 2

20 May 2011

5120-12-179-7287

5120-12-121-4894
Open End Wrench

121214894
TL5120-0101-260: RNCC: 2 | RNVC: 2
12A-7/16: RNCC: 3 | RNVC: 2
40462828: RNCC: 5 | RNVC: 2
TK-KG55-5120-354-260: RNCC: 5 | RNVC: 9
TK5120-354-260: RNCC: 5 | RNVC: 9
2209-34: RNCC: 5 | RNVC: 9
1931Z7/16: RNCC: 5 | RNVC: 9
TL5120-0082-510: RNCC: 5 | RNVC: 9
104976: RNCC: 5 | RNVC: 9
1931Z7-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-140-9166
Mechanical Puller

121409166
7649: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-357-7743
Eindrueckwerkzeug

123577743
510101: RNCC: 3 | RNVC: 2

22 Jul 2002

5120-12-090-1669

5120-12-357-2280
Duese Reiniger

123572280
0986611167: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-041-2687

5120-12-336-7544
Gewindeein Spindel

123367544
01500610920: RNCC: 3 | RNVC: 2

20 Dec 1994

5120-12-154-1807
Kolb Einsatzbuchse

121541807
0276122001: RNCC: 3 | RNVC: 2
S000276122001000: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-146-7555

5120-12-194-4119
Socket Wrench Screwdriver Attachment

121944119
TL5120-0102-100: RNCC: 2 | RNVC: 2
2051-7: RNCC: 3 | RNVC: 2
49-7: RNCC: 3 | RNVC: 2
DIN7422-7-10: RNCC: 5 | RNVC: 1
637600-7: RNCC: 5 | RNVC: 2
63750-7: RNCC: 5 | RNVC: 2
02050007: RNCC: 5 | RNVC: 2
49 7: RNCC: 5 | RNVC: 9

3 Nov 1982

5120-12-191-1693
Open End Box Wrench

121911693
CH1991/32: RNCC: 3 | RNVC: 2
1203 0378: RNCC: 5 | RNVC: 2
1203 0378: RNCC: 5 | RNVC: 9
12030378: RNCC: 5 | RNVC: 9
3-601-0-018-026-4: RNCC: 5 | RNVC: 9
3.601.0.018.026.4: RNCC: 5 | RNVC: 9
3.601.0.018.026.4: RNCC: 5 | RNVC: 9

18 Jan 1982

5120-12-121-8645
Quick Adjusting Screw Clamp

121218645
TL5120-0097-100: RNCC: 2 | RNVC: 2
TGK200: RNCC: 3 | RNVC: 2
F200-12: RNCC: 3 | RNVC: 2
DIN5117-2000: RNCC: 5 | RNVC: 1
TK-KG55-5120-203-100: RNCC: 5 | RNVC: 9
TK5120-203-100: RNCC: 5 | RNVC: 9
6-17: RNCC: 5 | RNVC: 9
2000DIN5117: RNCC: 5 | RNVC: 9
5120-007480: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-383-8367
Combination Box And Open End Wrench Set

123838367
0137100C: RNCC: 3 | RNVC: 2

13 Dec 2010

5120-12-312-8915
Montierwerk Huelse

123128915
1077868: RNCC: 2 | RNVC: 2
1077868: RNCC: 3 | RNVC: 2

17 Feb 1988

5120-12-172-9537
Dorn

121729537
1X56122387: RNCC: 3 | RNVC: 2

6 Mar 1978

5120-12-147-4340
Screw Thread Insert Tang Breakoff Tool

121474340
01585060000: RNCC: 3 | RNVC: 2
01582060000: RNCC: 5 | RNVC: 9
01582747000: RNCC: 5 | RNVC: 9
1196-4: RNCC: 5 | RNVC: 9
2-106: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-357-8520
Hand Hammer

123578520
3366.081: RNCC: 3 | RNVC: 2
9997001-991000.035.0: RNCC: 3 | RNVC: 2

1 Aug 2002

5120-12-317-6021
Pin Inserter

123176021
530013: RNCC: 2 | RNVC: 9

20 Apr 1989

5120-12-342-0486
Cross Tip Screwdriver

123420486
4723ESD PZD/SDV1X80: RNCC: 3 | RNVC: 2

4 Dec 1996

5120-12-305-4503
Mechanical Puller

123054503
0276150205: RNCC: 3 | RNVC: 2
S000276150205000: RNCC: 3 | RNVC: 2

8 Nov 1985

5120-12-359-8318
Mitnehmers Adapter

123598318
312589030704: RNCC: 3 | RNVC: 2

13 Mar 2003

5120-12-389-5104
Torque Wrench Adapter

123895104
R809301: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-310-8464
Retaining Ring Pliers

123108464
8000-A6: RNCC: 3 | RNVC: 2

2 Jul 1987

5120-12-384-7811
Shaf Mounting Tool

123847811
Y4275557: RNCC: 3 | RNVC: 2

29 Mar 2011

5120-12-334-5428
Seal Inserter

123345428
427 589 01 43 00: RNCC: 3 | RNVC: 2

20 May 1994

5120-12-341-4931
Hand Intrenching Tool

123414931
WRYUG8024: RNCC: 3 | RNVC: 2

10 Sep 1996

5120-12-126-2596
Spreizfeder Zange

121262596
2IN: RNCC: 3 | RNVC: 2
2IN: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-163-6073
Bearing And Bushing Inserter

121636073
105-14101W6: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-324-6154
Mechanical Puller

123246154
601589083300: RNCC: 3 | RNVC: 2

7 Mar 1991

5120-12-153-4981
Ueberlaufbehaelter

121534981
CH1774-21-2: RNCC: 3 | RNVC: 2
CH1774-21-2: RNCC: 5 | RNVC: 9
12158264: RNCC: 5 | RNVC: 9
6-088-8-014-010-8: RNCC: 5 | RNVC: 9
6-0888-01-4-0108: RNCC: 5 | RNVC: 9
6.088.801.4010.8: RNCC: 5 | RNVC: 9
6.0888.01.4.0108: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-175-6613
Socket Wrench

121756613
748.051.2: RNCC: 3 | RNVC: 2
102: RNCC: 5 | RNVC: 2
099-048-022-4: RNCC: 5 | RNVC: 9

10 Oct 1978

5120-12-310-4576
Face Spanner Wrench Socket

123104576
01TC11825: RNCC: 3 | RNVC: 2
01TC11825: RNCC: 5 | RNVC: 9

22 May 1987

5120-12-373-2877
Slip Joint Pliers

123732877
109224: RNCC: 3 | RNVC: 2

18 Oct 2007

5120-12-364-6773
Drive Pin Punch

123646773
70060002-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-123-5053
Open End Wrench

121235053
N0300541: RNCC: 3 | RNVC: 2
N300541: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-150-3932
Ke Haltevorrichtung

121503932
1X46106159: RNCC: 3 | RNVC: 2
V106159: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-310-3742
Socket Wrench

123103742
118265: RNCC: 3 | RNVC: 2
000-000.0052: RNCC: 5 | RNVC: 2

15 May 1987

5120-12-384-4958
Engine Valve Seat Insert Knockout Tool

123844958
F30450348: RNCC: 3 | RNVC: 2

28 Feb 2011

5120-12-330-1998
Mechanical Puller Attachment

123301998
0851 6699.007: RNCC: 3 | RNVC: 2
8516699.007: RNCC: 5 | RNVC: 2

13 Nov 1992

5120-12-362-5504
Tack Claw

123625504
611 589 00 33 00: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-12-180-0990
Torque Wrench Adapter

121800990
VG95211-ML-121800990: RNCC: 2 | RNVC: 2
P-896723-403: RNCC: 3 | RNVC: 2
P896723-403: RNCC: 5 | RNVC: 2
MAGERD 3264: RNCC: 5 | RNVC: 9

20 Aug 1979

5120-12-365-3575
Ausdrueckwerkzeug

123653575
2925SP14-01AY: RNCC: 3 | RNVC: 2

22 Dec 2004

5120-12-337-3707
Screwdriver Bit

123373707
IS19-2,5X18: RNCC: 3 | RNVC: 2
IS19-18: RNCC: 5 | RNVC: 2
00.50.13.66: RNCC: 5 | RNVC: 2
665657: RNCC: 5 | RNVC: 2

21 Feb 1995

5120-12-349-4716
Torque Wrench Adapter

123494716
2300211-991001.000.0: RNCC: 2 | RNVC: 2
2300211-991001.000.0: RNCC: 3 | RNVC: 2

18 Nov 1999

5120-12-383-5002
Workpiece Fixture

123835002
5.4082: RNCC: 3 | RNVC: 2

28 Oct 2010

5120-12-388-8468
M Indentation Tool

123888468
601589044300: RNCC: 3 | RNVC: 2

27 Apr 2012

5120-12-186-8333
Abstuetzung

121868333
99389823: RNCC: 3 | RNVC: 2
H256-2: RNCC: 5 | RNVC: 2
H256-2: RNCC: 5 | RNVC: 9

11 Feb 1981

5120-12-335-3159
Schluesseleinsatz

123353159
0852 8345: RNCC: 3 | RNVC: 2
8528345: RNCC: 5 | RNVC: 2

9 Aug 1994

5120-12-168-1122
Spanner Wrench

121681122
12709-21000W4: RNCC: 2 | RNVC: 2
335912-9012.000: RNCC: 3 | RNVC: 2
12709-21000W4: RNCC: 5 | RNVC: 2
12709-21000W4: RNCC: 5 | RNVC: 2
335912-9012.000: RNCC: 5 | RNVC: 9

18 Feb 1977

5120-12-388-4902
Ratchet Wrench

123884902
001.521: RNCC: 3 | RNVC: 2
001.521: RNCC: 5 | RNVC: 2

27 Mar 2012

5120-12-153-9066
Swivel Knob Jeweler's Screwdriver

121539066
787AM5: RNCC: 3 | RNVC: 2
102699: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-362-4009
Craftsman's Tweezers

123624009
T2391: RNCC: 3 | RNVC: 2

17 Feb 2004

5120-12-315-2779
Spanner Wrench

123152779
510032: RNCC: 2 | RNVC: 9

7 Oct 1988

5120-12-191-0319
Screw Thread Insert Inserter

121910319
01500179700: RNCC: 3 | RNVC: 2

7 Jan 1982

5120-12-308-3716
Socket Wrench

123083716
103: RNCC: 3 | RNVC: 2

3 Oct 1986

5120-12-373-4926
Socket Wrench Crowfoot Attachment

123734926
01211014: RNCC: 3 | RNVC: 2

8 Nov 2007

5120-12-186-7353
Schlagbuchse

121867353
99370434: RNCC: 3 | RNVC: 2
412210: RNCC: 5 | RNVC: 9
412210: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-338-2591
Hand Hammer

123382591
3625Y35: RNCC: 3 | RNVC: 2
1400013: RNCC: 5 | RNVC: 2
1074104: RNCC: 5 | RNVC: 2
015647: RNCC: 5 | RNVC: 2

12 Jun 1995

5120-12-349-4031
Mechanical Puller

123494031
0986612107: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-312-6789
Face Spanner Wrench Socket

123126789
123 589 02 07 00: RNCC: 3 | RNVC: 2
123589020700: RNCC: 5 | RNVC: 2

27 Jan 1988

5120-12-362-4813
Socket Wrench Set

123624813
54.0084.960.58: RNCC: 3 | RNVC: 2
96020117: RNCC: 5 | RNVC: 2

2 Mar 2004

Load More Results