What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 16 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 16 of 62

5120-12-139-5755

5120-12-196-4379
Socket Head Screw Key

121964379
22607: RNCC: 3 | RNVC: 2
T4431 5: RNCC: 3 | RNVC: 2
334-5,0X100: RNCC: 3 | RNVC: 2
205100: RNCC: 3 | RNVC: 2
1338-5X100: RNCC: 3 | RNVC: 2
01338105060: RNCC: 5 | RNVC: 2
334-5.0X100: RNCC: 5 | RNVC: 9

6 Jul 1983

5120-12-123-5837
Socket Wrench Socket

121235837
4015 2 1/4: RNCC: 3 | RNVC: 2
065759: RNCC: 3 | RNVC: 2
8900DZ2 1-4: RNCC: 3 | RNVC: 2
55A2 1-4: RNCC: 3 | RNVC: 2
50750122: RNCC: 3 | RNVC: 2
TVA5120-2-263-027: RNCC: 5 | RNVC: 1
TVA5120-2-263-027/1.1.59: RNCC: 5 | RNVC: 2
65-6-2 1-4: RNCC: 5 | RNVC: 2
110623: RNCC: 5 | RNVC: 2
05410076: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-153-5090
Dorn

121535090
CH2520-114NM: RNCC: 3 | RNVC: 2
8205892243/00: RNCC: 5 | RNVC: 2
820589224300: RNCC: 5 | RNVC: 2
CH2520-114NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-314-3531
Socket Wrench Set

123143531
75-51-M: RNCC: 3 | RNVC: 2
00075510083: RNCC: 5 | RNVC: 2
43021: RNCC: 5 | RNVC: 2
4487350010: RNCC: 5 | RNVC: 9
904ZN: RNCC: 5 | RNVC: 9

29 Jun 1988

5120-12-131-4966
Socket Wrench

121314966
NO PRIMARY REF 12-131-4966: RNCC: 3 | RNVC: 2
129804: RNCC: 5 | RNVC: 9
1945UM7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-361-1947
Boerdelwer Einsatz

123611947
80996060101: RNCC: 3 | RNVC: 2
80.99606-0101: RNCC: 5 | RNVC: 2

2 Sep 2003

5120-12-150-3924
P Haltevorrichtung

121503924
1X46914921: RNCC: 3 | RNVC: 2
V91492-1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-332-7860
Swivel Knob Jeweler's Screwdriver

123327860
4-366: RNCC: 3 | RNVC: 2

20 Sep 1993

5120-12-129-3301
Box Wrench

121293301
2W9-16X5-8: RNCC: 3 | RNVC: 2
2E9-16X5-8BSW: RNCC: 5 | RNVC: 9
06860: RNCC: 5 | RNVC: 9
630W9-16X5-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-341-6562
Socket Head Screw Key

123416562
10767A-3/16: RNCC: 3 | RNVC: 2
05022076001: RNCC: 3 | RNVC: 2
950PKL-3/16: RNCC: 5 | RNVC: 2
43570012: RNCC: 5 | RNVC: 2
43570012: RNCC: 5 | RNVC: 2
022076: RNCC: 5 | RNVC: 9

11 Oct 1996

5120-12-170-8006
Socket Head Screw Key

121708006
5100069-002000: RNCC: 3 | RNVC: 2
5100069-002000: RNCC: 5 | RNVC: 2
109712U: RNCC: 5 | RNVC: 9

11 Aug 1977

5120-12-388-5839
Oil Filter Wrench

123885839
WKZBDS0270430: RNCC: 3 | RNVC: 2

3 Apr 2012

5120-12-153-8748
Mechanical Puller

121538748
50000006000048: RNCC: 3 | RNVC: 2
P1873: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-360-3207
Box Wrench Set

123603207
713 305 42: RNCC: 3 | RNVC: 2

8 May 2003

5120-12-371-3471
Plier Clamp

123713471
514: RNCC: 3 | RNVC: 2
00.13.74.16: RNCC: 5 | RNVC: 2

19 Mar 2007

5120-12-005-0346

5120-12-192-9553
Plier Wrench

121929553
40390087: RNCC: 3 | RNVC: 2

7 Jun 1982

5120-12-342-2577
Montierhuelse

123422577
5870651048: RNCC: 3 | RNVC: 2

13 Jan 1997

5120-12-330-4478
Mechanical Puller

123304478
0852 4914: RNCC: 3 | RNVC: 2
8524914: RNCC: 5 | RNVC: 2

16 Dec 1992

5120-12-177-5045
Spanner Wrench

121775045
700120W6: RNCC: 3 | RNVC: 2
700120W6: RNCC: 5 | RNVC: 9

5 Feb 1979

5120-12-336-5856
Montierdorn

123365856
0851 6686: RNCC: 3 | RNVC: 2
8516686: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-140-2925

5120-12-389-0973
Pliers

123890973
182020091: RNCC: 3 | RNVC: 2

25 May 2012

5120-12-181-8137
Dorn

121818137
VW240A: RNCC: 3 | RNVC: 9

17 Dec 1979

5120-12-364-6809
Socket Wrench Socket

123646809
02020013-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-181-7302
Dorn

121817302
1X56136640: RNCC: 3 | RNVC: 2

12 Dec 1979

5120-12-327-1282
Socket Wrench

123271282
9291380619: RNCC: 3 | RNVC: 2
300.0390.0009.7: RNCC: 5 | RNVC: 2

4 Dec 1991

5120-12-323-0617
Hinged Posthole Digger

123230617
23777 G-F: RNCC: 3 | RNVC: 2

22 Oct 1990

5120-12-349-4152
Montage- Hebel

123494152
2300211-990600.009.0: RNCC: 2 | RNVC: 2
2300211-990600.009.0: RNCC: 3 | RNVC: 2

11 Nov 1999

5120-12-195-5126
Cross Tip Screwdriver

121955126
8080-3: RNCC: 3 | RNVC: 2

7 Mar 1983

5120-12-158-1048
Spanner Wrench

121581048
SS2882-4: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-002-0403

5120-12-150-4845
Socket Wrench

121504845
DIN659-13: RNCC: 2 | RNVC: 2
40303: RNCC: 3 | RNVC: 2
1070-13: RNCC: 3 | RNVC: 2
13DIN659: RNCC: 5 | RNVC: 2
13DIN659GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-4214
Box Wrench

121334214
113-5/16X11/32AF: RNCC: 3 | RNVC: 2
00.27.31.15: RNCC: 5 | RNVC: 2
4SZ5-16X11-32: RNCC: 5 | RNVC: 9
100303: RNCC: 5 | RNVC: 9
TL5120-0074-310: RNCC: 5 | RNVC: 9
4DZ5-16X11-32: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-170-8572
Ein- Und Ausbauvorr

121708572
NO PRIMARY REF 12-170-8572: RNCC: 3 | RNVC: 2
185924: RNCC: 5 | RNVC: 2
185924: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-156-1660
Retaining Ring Pliers

121561660
CH1772-10FE: RNCC: 3 | RNVC: 2
CH1772-10FE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-2533
Machinist's Vise

121262533
NO PRIMARY REF 12-126-2533: RNCC: 3 | RNVC: 2
DIN5115-D80DREHBAR: RNCC: 5 | RNVC: 9
MADREDREHBAR: RNCC: 5 | RNVC: 9
D80DIN5115DREHBAR: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-146-0587
L Aufdrueck- Huelse

121460587
23114-7101-04: RNCC: 2 | RNVC: 2
510155: RNCC: 5 | RNVC: 2
510155: RNCC: 5 | RNVC: 9
23114-7101-04: RNCC: 5 | RNVC: 9
510155: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-308-1774
Elektron Auszieher

123081774
T2375 3: RNCC: 3 | RNVC: 2
PUL-A-DIP202: RNCC: 3 | RNVC: 2
PUL-A-DIP14/20PIN/0.3 INCH: RNCC: 5 | RNVC: 2
603-086: RNCC: 5 | RNVC: 2

11 Sep 1986

5120-12-133-3760
Socket Wrench Crowfoot Attachment

121333760
540A7-16: RNCC: 3 | RNVC: 2
FC14: RNCC: 3 | RNVC: 2
02500028: RNCC: 5 | RNVC: 2
AN8506-1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-186-0442
Schluessel

121860442
E46-516-4: RNCC: 3 | RNVC: 2
72047: RNCC: 5 | RNVC: 9
53409: RNCC: 5 | RNVC: 9
E46-516-4: RNCC: 5 | RNVC: 9

25 Nov 1980

5120-12-147-6746
Socket Wrench

121476746
201-9-16: RNCC: 3 | RNVC: 2
895-9-16: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-146-7577
Aufziehvorrichtung

121467577
02066: RNCC: 3 | RNVC: 2
25704-360460.00.0: RNCC: 3 | RNVC: 2
25704-360460-00-0: RNCC: 5 | RNVC: 2
02066: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-1320
Socket Wrench Extension

121811320
1076: RNCC: 3 | RNVC: 2

29 Oct 1979

5120-12-320-6072
Wrench Extension Handle

123206072
42090606: RNCC: 3 | RNVC: 2
42090606: RNCC: 5 | RNVC: 2

30 Jan 1990

5120-12-181-1426
Wrench Kit

121811426
001589430900: RNCC: 3 | RNVC: 9

29 Oct 1979

5120-12-181-3941
Spannvorrichtung

121813941
310589006300: RNCC: 3 | RNVC: 9

19 Nov 1979

5120-12-134-2605

5120-12-329-0385
Hand Screw Starter

123290385
62220510: RNCC: 3 | RNVC: 2

11 Jul 1992

5120-12-044-5034

5120-12-126-1556

5120-12-380-4298
Screwdriver Bit

123804298
00654: RNCC: 3 | RNVC: 2
284-T6-T8: RNCC: 5 | RNVC: 2

29 Oct 2009

5120-12-349-5877
Spanner Wrench

123495877
726.104.140: RNCC: 3 | RNVC: 2
81971180021: RNCC: 3 | RNVC: 2

7 Dec 1999

5120-12-194-9219

5120-12-126-3390
Drive Pin Punch

121263390
434BECU6: RNCC: 3 | RNVC: 2
434BECU6: RNCC: 3 | RNVC: 9
253-6MM: RNCC: 5 | RNVC: 9
1891-6MM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-8185
Open End Box Wrench

123408185
24A-5/16X3/8: RNCC: 3 | RNVC: 2
251AF-5/16X3/8: RNCC: 3 | RNVC: 2
41482024: RNCC: 5 | RNVC: 2
2510101: RNCC: 5 | RNVC: 2

19 Jun 1996

5120-12-126-2138
Flat Tip Screwdriver

121262138
C8000-8-150: RNCC: 3 | RNVC: 2
C407-Z4-C63: RNCC: 5 | RNVC: 2
1100438: RNCC: 5 | RNVC: 2
C8000-1X8X150: RNCC: 5 | RNVC: 9
901604: RNCC: 5 | RNVC: 9
110043: RNCC: 5 | RNVC: 9
C8000-1-2X8X150: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-152-7355
Swivel Knob Jeweler's Screwdriver

121527355
2025/0-0,19X0,8: RNCC: 3 | RNVC: 2
DIN8320B0,16X0,8: RNCC: 5 | RNVC: 9
B0-16X0-8DIN8320: RNCC: 5 | RNVC: 9
DIN8320-B0,16X0,8: RNCC: 5 | RNVC: 9
DIN8320-B0,19X0,8: RNCC: 5 | RNVC: 9
DIN8320B-0,16X0,8: RNCC: 5 | RNVC: 9
190-008: RNCC: 5 | RNVC: 9
B0,16X0,8DIN8320: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-154-1021
Presz- Und S Griff

121541021
CH2183-2NM: RNCC: 3 | RNVC: 2
8205892243/02: RNCC: 5 | RNVC: 2
820589224302: RNCC: 5 | RNVC: 2
CH2183-2NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-170-9759
Flat Tip Screwdriver

121709759
140-125-7: RNCC: 3 | RNVC: 2
1470-1,2X7X125: RNCC: 3 | RNVC: 2
9710-125X7: RNCC: 3 | RNVC: 2
433 1,0X7-125: RNCC: 3 | RNVC: 9
110814: RNCC: 5 | RNVC: 2
178543: RNCC: 5 | RNVC: 2
01470012580: RNCC: 5 | RNVC: 2
F30006244: RNCC: 5 | RNVC: 2
9710-4: RNCC: 5 | RNVC: 9
9710-4-1X7X125: RNCC: 5 | RNVC: 9

26 Aug 1977

5120-12-322-5165
Seal Inserter

123225165
038.007.5: RNCC: 3 | RNVC: 2
790521077: RNCC: 5 | RNVC: 2
038.007.5-4: RNCC: 5 | RNVC: 2

29 Aug 1990

5120-12-358-0180
Box Wrench

123580180
DIN3111-41: RNCC: 2 | RNVC: 2

3 Sep 2002

5120-12-300-4858
Spanner Wrench

123004858
G005/113000: RNCC: 3 | RNVC: 2
G005/113000: RNCC: 5 | RNVC: 9

7 Aug 1984

5120-12-123-5359
Socket Wrench

121235359
DIN659-17: RNCC: 2 | RNVC: 2
17DIN659: RNCC: 3 | RNVC: 2
0864-17-0115DIN659: RNCC: 5 | RNVC: 2
17DIN659: RNCC: 5 | RNVC: 2
17DIN659GALNI8: RNCC: 5 | RNVC: 9
5168K17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-362-1143
Crimpzange Kopf

123621143
118323101: RNCC: 3 | RNVC: 2
CSV10-0097: RNCC: 5 | RNVC: 2
80996250097: RNCC: 5 | RNVC: 2
80996250055: RNCC: 5 | RNVC: 9

12 Jan 2004

5120-12-173-2296
Zentrierbolzen

121732296
009-017.410-000W3: RNCC: 3 | RNVC: 2
009-017-410-000W3: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-12-133-3215
Crimping Tool Die

121333215
05012: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-381-8989
Combination Box And Open End Wrench Set

123818989
0137100S: RNCC: 3 | RNVC: 2

15 Apr 2010

5120-12-342-2118
Ge Montierwerkzeug

123422118
1X56136416: RNCC: 3 | RNVC: 2

7 Jan 1997

5120-12-132-2724
Schwu Halteklammer

121322724
VW215B: RNCC: 3 | RNVC: 2
VW215B: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-335-0981
Socket Wrench Socket

123350981
F30006126: RNCC: 3 | RNVC: 2

22 Jul 1994

5120-12-135-7465

5120-12-390-2832
Bearing And Bushing Inserter And Remover

123902832
F0098333: RNCC: 3 | RNVC: 2

25 Oct 2012

5120-12-335-4107
Socket Wrench Socket

123354107
0852 3857: RNCC: 3 | RNVC: 2
8523857: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-314-3082
Bearing And Bushing Inserter

123143082
0852 8754: RNCC: 3 | RNVC: 2
8528754: RNCC: 5 | RNVC: 2

24 Jun 1988

5120-12-171-0615
Spanner Wrench

121710615
12706-1370.005W1: RNCC: 3 | RNVC: 2
12706-1370-005W1: RNCC: 5 | RNVC: 9
12706-1370.005W1: RNCC: 5 | RNVC: 9

5 Sep 1977

5120-12-380-6283
Torque Wrench

123806283
F30510423: RNCC: 3 | RNVC: 2

13 Nov 2009

5120-12-303-2889
Open End Wrench

123032889
28685: RNCC: 3 | RNVC: 2
GC523R: RNCC: 5 | RNVC: 2

13 Mar 1985

5120-12-349-4149
Socket Head Screw Key

123494149
2300211-991000.003.0: RNCC: 2 | RNVC: 2
2300211-991000.003.0: RNCC: 3 | RNVC: 2

11 Nov 1999

5120-12-317-3734
Offset Screwdriver

123173734
C2047-4: RNCC: 3 | RNVC: 2
106046: RNCC: 5 | RNVC: 2
C2047M4: RNCC: 5 | RNVC: 9
85-693-8772: RNCC: 6 | RNVC: 9

3 Apr 1989

5120-12-194-4607
Mechanical Puller Attachment

121944607
KDAL5492/0/7: RNCC: 3 | RNVC: 2
EFAL1011680715000: RNCC: 5 | RNVC: 2
KDAL5492-0-7: RNCC: 5 | RNVC: 2

4 Nov 1982

5120-12-152-7789
Schluessel

121527789
510070-10701: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-142-0253
Screwdriver Bit

121420253
100-P2: RNCC: 3 | RNVC: 2
52224020: RNCC: 3 | RNVC: 2
056620: RNCC: 5 | RNVC: 9
851-1GR2-50: RNCC: 5 | RNVC: 9
851-1H GR.2X50: RNCC: 5 | RNVC: 9
571E223BGR2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-187-3589
Torque Wrench Adapter

121873589
5801411-4146-001: RNCC: 3 | RNVC: 2
5801411-4146.001: RNCC: 3 | RNVC: 2
41461: RNCC: 5 | RNVC: 2

2 Apr 1981

5120-12-190-7550
Okular Zange

121907550
4900144-15000: RNCC: 2 | RNVC: 2
332104-8120.903: RNCC: 3 | RNVC: 2
332104-8120-903: RNCC: 5 | RNVC: 9
332104-8120.903: RNCC: 5 | RNVC: 9

14 Dec 1981

5120-12-350-2563
Hand Vise

123502563
723/100: RNCC: 3 | RNVC: 2

8 Mar 2000

5120-12-195-3840
Ausdrueckwerkzeug

121953840
S4-4600480: RNCC: 3 | RNVC: 2
S4-4600480-405: RNCC: 5 | RNVC: 9
S4-4600480-407: RNCC: 5 | RNVC: 9
S4-4600480: RNCC: 5 | RNVC: 9
S4-4600480-403: RNCC: 5 | RNVC: 9
MAGERD 5796: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-12-177-5049
Spanner Wrench

121775049
700503-8162W1: RNCC: 3 | RNVC: 2
700503-8162W1: RNCC: 5 | RNVC: 9

5 Feb 1979

5120-12-361-1201
Box Wrench

123611201
CBD32568P02: RNCC: 3 | RNVC: 2

26 Aug 2003

5120-12-147-4329
Face Spanner Wrench Socket

121474329
1X46104945: RNCC: 3 | RNVC: 2
V104945: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-178-6127
Klebepresse

121786127
2V2782B: RNCC: 3 | RNVC: 2
2V2782B: RNCC: 5 | RNVC: 9

3 May 1979

5120-12-146-9891
Jack Elevating Block

121469891
2332-811: RNCC: 2 | RNVC: 2
2332-811: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-314-9579
Spanner Wrench

123149579
P-0-719: RNCC: 3 | RNVC: 2
P-0-719: RNCC: 5 | RNVC: 9

1 Sep 1988

5120-12-370-9121
Socket Head Screw Key

123709121
0613 140 15: RNCC: 3 | RNVC: 2
54962: RNCC: 3 | RNVC: 2
00.43.40.72: RNCC: 5 | RNVC: 2
4001002549623: RNCC: 5 | RNVC: 2

16 Jan 2007

5120-12-333-5683
Drive Pin Punch

123335683
076-240080-909-0: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-700-7920
Socket Wrench

127007920
3424 0515 04: RNCC: 2 | RNVC: 2

5 May 1993

5120-12-333-5659
Seal Inserter

123335659
1842701: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-157-3294
Montierhuelse

121573294
25704-360460.01.0: RNCC: 2 | RNVC: 2
02064: RNCC: 3 | RNVC: 2
25704-360460.01.0: RNCC: 3 | RNVC: 2
25704-360460-01-0: RNCC: 5 | RNVC: 2
25704-360460.01.0: RNCC: 5 | RNVC: 2
25704-360460-01-0: RNCC: 5 | RNVC: 2
02064: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-161-8906
Elektron Auszieher

121618906
3528: RNCC: 3 | RNVC: 2
91630633: RNCC: 5 | RNVC: 2
147478: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-091-6169

5120-12-324-5285
Auswechs Klemmteil

123245285
944602000: RNCC: 3 | RNVC: 2

27 Feb 1991

5120-12-368-8432
Socket Wrench Screwdriver Attachment

123688432
3245-TXL 60: RNCC: 3 | RNVC: 2
00.50.39.92: RNCC: 5 | RNVC: 2

27 Apr 2006

5120-12-192-3901
Aufhaengevorrichtun

121923901
T80090039: RNCC: 3 | RNVC: 2
T811000090039: RNCC: 5 | RNVC: 9

20 Apr 1982

5120-12-343-9346
Torque Wrench

123439346
JD856608020BW: RNCC: 3 | RNVC: 2

15 Aug 1997

5120-12-146-8063

5120-12-363-2947
Piston Inserter

123632947
F6348804: RNCC: 3 | RNVC: 2

20 May 2004

5120-12-340-3484
Claw Bar

123403484
BRECHEISEN 80 CM M. GEISZFUSZ: RNCC: 3 | RNVC: 2

28 Mar 1996

5120-12-176-6006
Inserted Hammer Face

121766006
TL5120-0126-B101: RNCC: 2 | RNVC: 2
3508060: RNCC: 3 | RNVC: 2
250860E60: RNCC: 5 | RNVC: 9

6 Dec 1978

5120-12-309-6571
Schluessel

123096571
335927-9037.000: RNCC: 3 | RNVC: 2
6264.10-11: RNCC: 5 | RNVC: 2
335927-9037-000: RNCC: 5 | RNVC: 9
335927-9037.000: RNCC: 5 | RNVC: 9
33 59 27-9037.000: RNCC: 5 | RNVC: 9

13 Feb 1987

5120-12-195-1808
Box Wrench

121951808
DIN7447-11: RNCC: 2 | RNVC: 2
161411: RNCC: 3 | RNVC: 2
61740VDE11: RNCC: 3 | RNVC: 2
980111: RNCC: 3 | RNVC: 2
9517-11: RNCC: 5 | RNVC: 9
61740VDE11: RNCC: 5 | RNVC: 9
2VDE11: RNCC: 5 | RNVC: 9

20 Jan 1983

5120-12-311-7236
Ge Montierwerkzeug

123117236
80996066002: RNCC: 3 | RNVC: 2
80.99606.6002: RNCC: 5 | RNVC: 2

12 Oct 1987

5120-12-143-9496
Cross Tip Screwdriver

121439496
1013W4: RNCC: 2 | RNVC: 2
1013W4: RNCC: 3 | RNVC: 2
300009: RNCC: 5 | RNVC: 2
300009: RNCC: 5 | RNVC: 2
1013W4: RNCC: 5 | RNVC: 9
490003: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-354-0308
Mechanical Puller Attachment

123540308
000589903300: RNCC: 3 | RNVC: 2

29 May 2001

5120-12-317-4945
Torque Wrench

123174945
2656: RNCC: 3 | RNVC: 2
38431: RNCC: 5 | RNVC: 2

13 Apr 1989

5120-12-366-5536
Driftpin

123665536
100690: RNCC: 3 | RNVC: 2

9 May 2005

5120-12-310-1965
Spanner Wrench

123101965
1328.02: RNCC: 3 | RNVC: 2

16 Apr 1987

5120-12-332-8436
Seal Inserter

123328436
9136418: RNCC: 3 | RNVC: 2

27 Sep 1993

5120-12-151-8423

5120-12-304-9458
Face Spanner Wrench Socket

123049458
6795597W11: RNCC: 3 | RNVC: 2

10 Sep 1985

5120-12-384-3781
Bushing Extracting Pliers

123843781
T80090507: RNCC: 3 | RNVC: 2

18 Feb 2011

5120-12-094-0362

5120-12-041-2672

5120-12-154-1521

5120-12-394-6141
Socket Wrench Socket

123946141
13672: RNCC: 3 | RNVC: 2

18 Dec 2013

5120-12-120-5760
Hand Screw Jack

121205760
EL42: RNCC: 3 | RNVC: 2
609646: RNCC: 5 | RNVC: 2
11609646: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-363-2380
Mechanical Puller

123632380
F6554889: RNCC: 3 | RNVC: 2

14 May 2004

5120-12-199-6851
Socket Wrench Socket

121996851
DIN3124-S41X20L: RNCC: 2 | RNVC: 2
56-41: RNCC: 3 | RNVC: 2
64470-41: RNCC: 5 | RNVC: 2
644700-41: RNCC: 5 | RNVC: 2
F30006132: RNCC: 5 | RNVC: 2
05020041: RNCC: 5 | RNVC: 2
52566410: RNCC: 5 | RNVC: 9
52566-410: RNCC: 5 | RNVC: 9
8905SM41: RNCC: 5 | RNVC: 9

22 May 1984

5120-12-368-4037
Zy Montierwerkzeug

123684037
310740: RNCC: 3 | RNVC: 2
0852-03-10-00/35: RNCC: 5 | RNVC: 2

7 Mar 2006

5120-12-327-8796
Combination Box And Open End Wrench Set

123278796
1952Z/11T: RNCC: 3 | RNVC: 2
105772: RNCC: 5 | RNVC: 2

17 Mar 1992

5120-12-153-4997
Einbauvorrichtung

121534997
CH1920-14: RNCC: 3 | RNVC: 2
CH1920-14: RNCC: 5 | RNVC: 9
6-0888-01-7-0201: RNCC: 5 | RNVC: 9
6.0888.01.7.0201: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-380-3193
Cross Tip Screwdriver

123803193
668000-2K: RNCC: 3 | RNVC: 2

20 Oct 2009

5120-12-390-7516
Socket Wrench Screwdriver Attachment

123907516
02050008-TCS: RNCC: 3 | RNVC: 2

7 Dec 2012

5120-12-317-5192
Screwdriver Bit

123175192
F15006: RNCC: 3 | RNVC: 2

14 Apr 1989

5120-12-314-1727
Bearing And Bushing Inserter

123141727
0852 8757: RNCC: 3 | RNVC: 2
8528757: RNCC: 5 | RNVC: 2

15 Jun 1988

5120-12-328-3685
Pliers

123283685
1816-22: RNCC: 3 | RNVC: 2
5377980004: RNCC: 5 | RNVC: 2

12 May 1992

5120-12-337-1630
Socket Wrench Handle

123371630
401: RNCC: 3 | RNVC: 2
11050002: RNCC: 5 | RNVC: 2

26 Jan 1995

5120-12-021-6818

5120-12-158-9741
Electronic Equipment Alignment Tool

121589741
1-911: RNCC: 3 | RNVC: 2
700-10G: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-199-4984
Screw Thread Insert Extractor

121994984
SRM 0812 R: RNCC: 3 | RNVC: 2
SRM 0812 R: RNCC: 5 | RNVC: 9

3 May 1984

5120-12-147-6411
Combination Box And Open End Wrench

121476411
4020LM5-5: RNCC: 3 | RNVC: 2
107774: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-171-2726
Socket Wrench

121712726
251244050010: RNCC: 3 | RNVC: 2
251244050010: RNCC: 5 | RNVC: 2

23 Sep 1977

5120-12-307-1920
Mechanical Puller

123071920
320-991420: RNCC: 3 | RNVC: 2

21 May 1986

5120-12-377-3040
Ante Mounting Tool

123773040
313314: RNCC: 3 | RNVC: 2

6 Jan 2009

5120-12-139-3613
Schraubendreher

121393613
GF33670: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-3123

5120-12-129-6638
Hand Hammer

121296638
NO PRIMARY REF 12-129-6638: RNCC: 3 | RNVC: 2
A500DIN7239: RNCC: 5 | RNVC: 9
DIN7239-A500: RNCC: 5 | RNVC: 9
653A104-500: RNCC: 5 | RNVC: 9
5120R1ES500: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-163-3691
Socket Wrench

121633691
HL370790: RNCC: 3 | RNVC: 2
MS348789-98: RNCC: 5 | RNVC: 2
HL370790: RNCC: 5 | RNVC: 9
HL370790: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5999
Socket Wrench

121235999
NO PRIMARY REF 12-123-5999: RNCC: 3 | RNVC: 2
105225: RNCC: 5 | RNVC: 9
1937Z5-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-151-6549
Visi Nietunterlage

121516549
1004-0109V2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-158-5321
Box Wrench

121585321
NO PRIMARY REF 12-158-5321: RNCC: 3 | RNVC: 2
27-21X23: RNCC: 5 | RNVC: 9
41092123: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-306-9233
Open End Wrench

123069233
C900M30X32: RNCC: 3 | RNVC: 2
4200514: RNCC: 3 | RNVC: 2
905033: RNCC: 3 | RNVC: 2
402-30X32: RNCC: 3 | RNVC: 2
402-30X32: RNCC: 3 | RNVC: 9
C-900M30X32: RNCC: 5 | RNVC: 2
135128: RNCC: 5 | RNVC: 2
402BECU30X32: RNCC: 5 | RNVC: 2
402BECU30X32: RNCC: 5 | RNVC: 9

16 Apr 1986

5120-12-150-6246
Mechanical Puller Step Plate

121506246
23176-264260-01-0: RNCC: 2 | RNVC: 2
23176-264260.01.0: RNCC: 2 | RNVC: 2
23176-264260-01-0: RNCC: 5 | RNVC: 2
23176-264260.01.0: RNCC: 5 | RNVC: 2
23176-264260-01-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-120-6207
Wrench Kit

121206207
TL5120-0082: RNCC: 2 | RNVC: 2
5120-053SATZB: RNCC: 5 | RNVC: 9
W044: RNCC: 5 | RNVC: 9
40-40A25-8-23S: RNCC: 5 | RNVC: 9
96010153: RNCC: 5 | RNVC: 9
5120-0053SATZB: RNCC: 5 | RNVC: 9
TL5120-0053SATZB: RNCC: 5 | RNVC: 9
5120-01047: RNCC: 6 | RNVC: 9
5120-01046: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-198-2391
Open End Wrench

121982391
092201639: RNCC: 3 | RNVC: 2

4 Jan 1984

5120-12-342-8414
Mechanical Puller

123428414
18 910 6401: RNCC: 3 | RNVC: 2

9 Apr 1997

5120-12-140-2919

5120-12-140-5394

5120-12-350-8474
Machinist's Vise

123508474
10805: RNCC: 3 | RNVC: 2

29 May 2000

5120-12-365-9159
Swivel Knob Jeweler's Screwdriver

123659159
T4877X 06: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-366-8556
Swivel Knob Jeweler's Screwdriver

123668556
T4877XESDTX20: RNCC: 3 | RNVC: 2

15 Jun 2005

5120-12-162-8671
Einstell- Dorn

121628671
212650: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-363-8710
Bearing And Bushing Inserter

123638710
T670P5001203: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-338-9476
Welle

123389476
4986018: RNCC: 3 | RNVC: 2

15 Sep 1995

5120-12-365-7562
Zange Einsatz

123657562
CBD32063P03: RNCC: 3 | RNVC: 2

1 Feb 2005

5120-12-091-4752

5120-12-337-8051
Sc Montierwerkzeug

123378051
64172055-01: RNCC: 3 | RNVC: 2
64172055-01: RNCC: 5 | RNVC: 2
AA006695: RNCC: 6 | RNVC: 9

13 Apr 1995

5120-12-153-9125
Gleiske Haltebuegel

121539125
131-08-01-8: RNCC: 3 | RNVC: 2
583901517: RNCC: 5 | RNVC: 2
510069EB131-08-01-8: RNCC: 5 | RNVC: 2
3901517: RNCC: 5 | RNVC: 2
583901517: RNCC: 5 | RNVC: 9
583901517: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-168-5619
Socket Wrench Crowfoot Attachment

121685619
1950M22: RNCC: 3 | RNVC: 2
440-22: RNCC: 3 | RNVC: 2
1950M-22: RNCC: 5 | RNVC: 2
1950-M22: RNCC: 5 | RNVC: 2
105581: RNCC: 5 | RNVC: 2
F30027425: RNCC: 5 | RNVC: 2
02190022: RNCC: 5 | RNVC: 2
1055813: RNCC: 5 | RNVC: 2
85-800-5958: RNCC: 6 | RNVC: 9

22 Mar 1977

5120-12-337-2246
Verspannvorrichtung

123372246
11.49028-0348: RNCC: 3 | RNVC: 2
021.102: RNCC: 5 | RNVC: 2
021.102: RNCC: 5 | RNVC: 9
11.49028-0348: RNCC: 5 | RNVC: 9

3 Feb 1995

5120-12-342-6112
Crimping Tool Die

123426112
VG95236T11AC002: RNCC: 2 | RNVC: 2
MRP0858: RNCC: 3 | RNVC: 9

6 Mar 1997

5120-12-374-4003
Pliers

123744003
65086160-TCS: RNCC: 3 | RNVC: 2

13 Feb 2008

5120-12-362-2856
Jaw Cable Grip

123622856
70536-001: RNCC: 3 | RNVC: 2

3 Feb 2004

5120-12-365-7463
Spanner Wrench

123657463
57091A0000-01: RNCC: 3 | RNVC: 2
M47603: RNCC: 5 | RNVC: 2

31 Jan 2005

5120-12-362-4939
Flat Tip Screwdriver

123624939
54.0084.960.27: RNCC: 3 | RNVC: 2
8060VDE-10-200: RNCC: 5 | RNVC: 2

3 Mar 2004

5120-12-381-7700
Torque Wrench

123817700
1400150: RNCC: 3 | RNVC: 2
1400150: RNCC: 5 | RNVC: 2
756-01: RNCC: 5 | RNVC: 2
756-01: RNCC: 5 | RNVC: 2

29 Mar 2010

5120-12-313-7469
Hand Yoke Riveter

123137469
NV1-030583: RNCC: 3 | RNVC: 2
VN208: RNCC: 5 | RNVC: 2

30 Apr 1988

5120-12-157-0688
Offset Screwdriver

121570688
2876007000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-382-6913
Torque Wrench Adapter

123826913
UT819: RNCC: 3 | RNVC: 2

26 Jul 2010

5120-12-381-8975
Offset Screwdriver

123818975
0831300S: RNCC: 3 | RNVC: 2

15 Apr 2010

5120-12-346-8617
Montierhuelse

123468617
80996060312: RNCC: 3 | RNVC: 2

21 Sep 1998

5120-12-375-7294
Plug Electrical Connector Extractor

123757294
0015387030: RNCC: 3 | RNVC: 2

30 Jun 2008

5120-12-126-1917
Watchmaker's Blower

121261917
4332302: RNCC: 3 | RNVC: 2
4735: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-163-6623
Einbauwerkzeug

121636623
26-21C1228P010: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-313-6484
Hand Caulking Tool

123136484
7 208 13 04 00: RNCC: 3 | RNVC: 2
5110700004: RNCC: 5 | RNVC: 2
SUS-9-0301: RNCC: 5 | RNVC: 2
7208130400: RNCC: 5 | RNVC: 2

21 Apr 1988

5120-12-320-8281
Ratchet Wrench

123208281
2654-330290.00: RNCC: 1 | RNVC: 2
2654-330290.00: RNCC: 3 | RNVC: 2
679-00170000: RNCC: 5 | RNVC: 9

21 Feb 1990

5120-12-383-1459
Mechanical Puller

123831459
AR001-01-01-004: RNCC: 3 | RNVC: 2

17 Sep 2010

5120-12-356-4570
Mechanical Puller Attachment

123564570
04003854: RNCC: 3 | RNVC: 2

1 Mar 2002

5120-12-381-0747
Lining Bar

123810747
5417-212000A00C: RNCC: 3 | RNVC: 2

7 Jan 2010

5120-12-196-4038
Hand Powered Poppet Valve Lapper

121964038
795-4: RNCC: 3 | RNVC: 2
4120004: RNCC: 3 | RNVC: 2
5798620002: RNCC: 5 | RNVC: 9

4 Jul 1983

5120-12-339-0752
Flat Tip Screwdriver

123390752
NO PRIMARY REF 12-339-0752: RNCC: 3 | RNVC: 2
3930140011: RNCC: 5 | RNVC: 9
829-6: RNCC: 5 | RNVC: 9

9 Oct 1995

5120-12-370-1103
Hand Hydraulic Jack

123701103
150.021.0: RNCC: 3 | RNVC: 2
ATN10-175: RNCC: 5 | RNVC: 2

21 Sep 2006

5120-12-155-9419
Flat Tip Screwdriver

121559419
NM256-02: RNCC: 3 | RNVC: 2
JD5120-12-155-9419: RNCC: 5 | RNVC: 2
NM256-02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-316-1442
Socket Wrench Screwdriver Attachment

123161442
ZG4121T003: RNCC: 3 | RNVC: 2
ZG 4121 T003: RNCC: 5 | RNVC: 9
ZG4121T003: RNCC: 5 | RNVC: 9

24 Dec 1988

5120-12-195-4572
Spanner Wrench

121954572
1X56 122 372: RNCC: 3 | RNVC: 2
1X56122372: RNCC: 5 | RNVC: 2

28 Feb 1983

5120-12-092-2255

5120-12-186-8043
Socket Head Screw Key Set

121868043
DIN911TZ14: RNCC: 3 | RNVC: 2
1997LZ14T: RNCC: 3 | RNVC: 2

6 Feb 1981

5120-12-329-3635
Socket Wrench Socket

123293635
4990023: RNCC: 3 | RNVC: 2

12 Aug 1992

5120-12-365-6618
Torque Wrench Adapter

123656618
CBD30102G01: RNCC: 3 | RNVC: 2

24 Jan 2005

5120-12-178-6475
Socket Wrench Socket

121786475
01TC30076: RNCC: 3 | RNVC: 2

7 May 1979

5120-12-092-2249

5120-12-383-7011
Spanner Wrench

123837011
1X56.136.600: RNCC: 3 | RNVC: 2

26 Nov 2010

5120-12-343-7271
Swivel Knob Jeweler's Screwdriver

123437271
240 355 90: RNCC: 3 | RNVC: 2

17 Jul 1997

5120-12-181-5087
Eindrueckvorrichtun

121815087
141020: RNCC: 3 | RNVC: 2
4682: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-382-2014
Pliers

123822014
EG 1550: RNCC: 3 | RNVC: 2
01.57.76.62: RNCC: 5 | RNVC: 2

20 May 2010

5120-12-382-1994
Retaining Ring Pliers

123821994
EJ 5500: RNCC: 3 | RNVC: 2
01.57.90.76: RNCC: 5 | RNVC: 2

20 May 2010

5120-12-306-5890
Combination Box And Open End Wrench

123065890
1B-2AF: RNCC: 3 | RNVC: 2
600784: RNCC: 5 | RNVC: 2

12 Mar 1986

5120-12-344-6442
Seal Inserter

123446442
99370362: RNCC: 3 | RNVC: 2

19 Nov 1997

5120-12-368-6527
Socket Wrench

123686527
210-16X18: RNCC: 3 | RNVC: 2
00.38.35.52: RNCC: 5 | RNVC: 2

4 Apr 2006

5120-12-370-7251
Driftpin

123707251
3282/49: RNCC: 3 | RNVC: 2

14 Dec 2006

5120-12-353-9257
Plier Wrench

123539257
950589003700: RNCC: 3 | RNVC: 2
950 589 00 37 00: RNCC: 5 | RNVC: 2

18 May 2001

5120-12-191-8738
Montagevorrichtung

121918738
66607400: RNCC: 3 | RNVC: 2
E671-M5: RNCC: 5 | RNVC: 2

15 Mar 1982

5120-12-188-0821
Mechanical Puller

121880821
6680089127.01: RNCC: 3 | RNVC: 2

1 Jun 1981

5120-12-164-6321
Spanner Wrench

121646321
264-473: RNCC: 3 | RNVC: 2
264-473: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-127-2821
Gummi Einfuehrkegel

121272821
4643: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-347-9960
Hand Hose Fitting Swaging Tool Kit

123479960
WZ13: RNCC: 3 | RNVC: 2
610870: RNCC: 5 | RNVC: 2

24 Mar 1999

5120-12-352-8767
Mechanical Puller

123528767
CBD45306G01: RNCC: 3 | RNVC: 2

28 Dec 2000

5120-12-371-9017
Spatula

123719017
327313: RNCC: 3 | RNVC: 2

29 May 2007

5120-12-127-8514

5120-12-172-6382
Dorn

121726382
1X56099070: RNCC: 3 | RNVC: 2
0535409: RNCC: 5 | RNVC: 2
V99070: RNCC: 5 | RNVC: 2
535409: RNCC: 5 | RNVC: 9

31 Jan 1978

5120-12-332-9810
Bearing And Bushing Inserter

123329810
321589081500: RNCC: 3 | RNVC: 2

18 Oct 1993

5120-12-336-5850
Montierdorn

123365850
0851 6505: RNCC: 3 | RNVC: 2
8516505: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-364-6130
Socket Wrench Crowfoot Attachment

123646130
02190018-TCS: RNCC: 3 | RNVC: 2

14 Oct 2004

5120-12-360-0811
Aligning Punch

123600811
SMJ209-001-107: RNCC: 3 | RNVC: 2

4 Apr 2003

5120-12-133-3978
Screwdriver Bit

121333978
685/6: RNCC: 3 | RNVC: 2
653934: RNCC: 5 | RNVC: 2
1414966: RNCC: 5 | RNVC: 2
7761-06: RNCC: 5 | RNVC: 9
6990M6: RNCC: 5 | RNVC: 9
1414966-4A: RNCC: 5 | RNVC: 9
1414966/4: RNCC: 5 | RNVC: 9
1414966/4A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-4460
Pliers

123054460
NO PRIMARY REF 12-305-4460: RNCC: 3 | RNVC: 2
2458S: RNCC: 5 | RNVC: 9

7 Nov 1985

5120-12-141-1301
Schluessel

121411301
5800416-0101.002: RNCC: 2 | RNVC: 2
5800416-0101.002: RNCC: 3 | RNVC: 2
6P367-101-2: RNCC: 5 | RNVC: 2
2223628701: RNCC: 5 | RNVC: 2
5800416-0101-002: RNCC: 5 | RNVC: 2
5800416-0101-002: RNCC: 5 | RNVC: 9
5800416-0101.002: RNCC: 5 | RNVC: 9
22236 28701: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-8345
Ratchet Wrench

121998345
31K/6: RNCC: 3 | RNVC: 2
62900-150: RNCC: 5 | RNVC: 2
629000: RNCC: 5 | RNVC: 2
624306: RNCC: 5 | RNVC: 2

5 Jun 1984

5120-12-163-3908
Hebeoese

121633908
510195-010-00: RNCC: 2 | RNVC: 2
169106001: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-308-1335
Box Wrench

123081335
03.339.02.02.0: RNCC: 3 | RNVC: 2
65.202.020.22: RNCC: 5 | RNVC: 2
D-03.339.02.02.0: RNCC: 5 | RNVC: 2

4 Sep 1986

5120-12-312-9990
Lager- Und Einsatz

123129990
000589564300: RNCC: 3 | RNVC: 2
7083628: RNCC: 5 | RNVC: 2

24 Feb 1988

5120-12-380-6258
Spanner Wrench

123806258
F30006187: RNCC: 3 | RNVC: 2

13 Nov 2009

5120-12-370-3999
Ratchet Wrench

123703999
300: RNCC: 3 | RNVC: 2

2 Nov 2006

5120-12-022-0327

5120-12-091-4755

5120-12-382-8826
Flat Tip Screwdriver

123828826
47601008-TCS: RNCC: 3 | RNVC: 2

19 Aug 2010

5120-12-133-3717

5120-12-380-6590
Ratchet Wrench

123806590
503.4813: RNCC: 3 | RNVC: 2

17 Nov 2009

5120-12-387-8062
Seal Remover

123878062
F6783824: RNCC: 3 | RNVC: 2

31 Jan 2012

5120-12-387-7119
Bearing And Bushing Inserter And Remover

123877119
F6783605: RNCC: 3 | RNVC: 2

26 Jan 2012

5120-12-385-4354
Horseshoe Hot Fitting Tongs

123854354
53.000.047: RNCC: 3 | RNVC: 2
53.000.047: RNCC: 5 | RNVC: 2

1 Jun 2011

5120-12-342-6698
Spanner Wrench

123426698
18781 24278: RNCC: 2 | RNVC: 2
1878124278: RNCC: 3 | RNVC: 2
18781 24278: RNCC: 5 | RNVC: 9

13 Mar 1997

5120-12-393-9126
Socket Wrench

123939126
05013402001: RNCC: 3 | RNVC: 2
495-7X230: RNCC: 5 | RNVC: 2

21 Oct 2013

5120-12-154-3184
Socket Wrench Handle

121543184
NM296-03: RNCC: 3 | RNVC: 2
586-2581: RNCC: 5 | RNVC: 2
586-2581: RNCC: 5 | RNVC: 2
NM296-03: RNCC: 5 | RNVC: 9
586-2581: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5223
Box Wrench

121235223
NO PRIMARY REF 12-123-5223: RNCC: 3 | RNVC: 2
41060910: RNCC: 5 | RNVC: 9
22-9X10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-387-3721
Mechanical Puller

123873721
D0132307-001: RNCC: 3 | RNVC: 2

5 Dec 2011

5120-12-330-4935
Socket Wrench Socket

123304935
20-7BA: RNCC: 3 | RNVC: 2
616869: RNCC: 5 | RNVC: 2

22 Dec 1992

5120-12-700-3622
Socket Wrench Extension

127003622
51-083126024: RNCC: 2 | RNVC: 2

9 Apr 1992

5120-12-358-4874
Crimpzange Kopf

123584874
118098101: RNCC: 3 | RNVC: 2
80996250089: RNCC: 3 | RNVC: 2
CSV10-0089: RNCC: 5 | RNVC: 2
80.99625-0089: RNCC: 5 | RNVC: 2
80.99625-0035: RNCC: 5 | RNVC: 9
80996250035: RNCC: 5 | RNVC: 9

21 Oct 2002

5120-12-163-0529
Dichtr Schutzhuelse

121630529
142100: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-364-1827
Mechanical Puller

123641827
F6553608: RNCC: 3 | RNVC: 2

28 Aug 2004

5120-12-192-8057
Bearing And Bushing Inserter

121928057
460 589 12 15 00: RNCC: 3 | RNVC: 2
460589121500: RNCC: 3 | RNVC: 2

26 May 1982

5120-12-157-1660
Ein- Und Ausbauwerk

121571660
1125890861: RNCC: 3 | RNVC: 2
1115890161: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-370-9390
Machinist's Vise

123709390
10807 UND 10215: RNCC: 3 | RNVC: 2
00.10.11.41: RNCC: 5 | RNVC: 2

18 Jan 2007

5120-12-150-5717
Anziehvorrichtung

121505717
838589195900: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-094-1539

5120-12-090-5461

5120-12-129-8043

5120-12-384-9892
Lifting Pneumatic Bag Kit

123849892
3110000800: RNCC: 3 | RNVC: 2
063522: RNCC: 5 | RNVC: 2
4240-02306: RNCC: 6 | RNVC: 9

15 Apr 2011

5120-12-316-5765
Retaining Ring Pliers

123165765
770167: RNCC: 3 | RNVC: 2
D125DIN5256-GERAUHT: RNCC: 5 | RNVC: 9
DIN5256-D125GERAUHT: RNCC: 5 | RNVC: 9

25 Jan 1989

5120-12-321-0695
Ver Schluesselsatz

123210695
250A-19-1900: RNCC: 3 | RNVC: 2
250A-19-1900: RNCC: 5 | RNVC: 9

22 Mar 1990

5120-12-386-9975
Spanner Wr Adapter

123869975
66-031-02-0106267: RNCC: 3 | RNVC: 2
10106267: RNCC: 5 | RNVC: 2

25 Oct 2011

5120-12-144-6296
Trag Montagestempel

121446296
2360-264127.00.0: RNCC: 2 | RNVC: 2
2360-264127.00.0: RNCC: 3 | RNVC: 2
2360-264127-00-0: RNCC: 5 | RNVC: 2
2360-264127-00-0: RNCC: 5 | RNVC: 2
2360-264127.00.0: RNCC: 5 | RNVC: 2
2360-264127.00.0: RNCC: 5 | RNVC: 9
2360-264127-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-134-3261
Fuehrungskegel

121343261
26-50-08-4: RNCC: 3 | RNVC: 2
26-50-08-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-5528
Montagewerkzeug

121715528
2360-264152.01.0: RNCC: 2 | RNVC: 2
2360-264152.01.0: RNCC: 3 | RNVC: 2
2360-264152-01-0: RNCC: 5 | RNVC: 2
35D2641-01520: RNCC: 5 | RNVC: 2
2360-264152-01-0: RNCC: 5 | RNVC: 2
2360-264152-01-0: RNCC: 5 | RNVC: 9
2360-264152.01.0: RNCC: 5 | RNVC: 9
2360-264152.01.0: RNCC: 5 | RNVC: 9

24 Oct 1977

5120-12-151-8412
Haken

121518412
C22407-A6-C3: RNCC: 3 | RNVC: 2
C22407A6C3: RNCC: 5 | RNVC: 2
C22407A6C3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-9938
Aligning Punch

123819938
42-80016-600: RNCC: 3 | RNVC: 2
42-80-016.6: RNCC: 5 | RNVC: 2

26 Apr 2010

5120-12-317-8239
Mechanical Puller

123178239
22/1 AND 21/4: RNCC: 3 | RNVC: 2
0000 9799 351: RNCC: 3 | RNVC: 2

17 May 1989

5120-12-174-8366
Craftsman's Tweezers

121748366
NM451-01: RNCC: 3 | RNVC: 2
NM451-01: RNCC: 5 | RNVC: 9

7 Aug 1978

5120-12-193-6404
Mechanical Puller Step Plate

121936404
1S51320-0000: RNCC: 3 | RNVC: 2
1S51320-0000-405: RNCC: 5 | RNVC: 2
1S51320-0000-407: RNCC: 5 | RNVC: 2
1S51320-0000-403: RNCC: 5 | RNVC: 2
MAGERD 3543: RNCC: 5 | RNVC: 2

16 Aug 1982

5120-12-194-8630
Elektron Auszieher

121948630
54701199: RNCC: 3 | RNVC: 2
PUL-TO5: RNCC: 5 | RNVC: 9
54174199: RNCC: 5 | RNVC: 9

14 Dec 1982

5120-12-164-6327
Spanner Wrench

121646327
264-475: RNCC: 3 | RNVC: 2
264-475: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-312-9138
Spanner Wrench

123129138
KDEP 2993: RNCC: 3 | RNVC: 2

18 Feb 1988

5120-12-312-0054
Wrench Extension Handle

123120054
1000042-193644: RNCC: 3 | RNVC: 2

10 Nov 1987

5120-12-174-6766
Pipe Wrench

121746766
212C: RNCC: 3 | RNVC: 9
4165: RNCC: 5 | RNVC: 9
2182: RNCC: 5 | RNVC: 9

19 Jul 1978

5120-12-351-3279
Cable Type Ratchet Lever Puller

123513279
Y16: RNCC: 3 | RNVC: 2

13 Jul 2000

5120-12-149-5849
Socket Wrench

121495849
1936M20X21: RNCC: 3 | RNVC: 2
105145: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-344-7835
Elektron Auszieher

123447835
54.0054.850.00: RNCC: 3 | RNVC: 2

9 Dec 1997

5120-12-383-9641
Mounting Sleeve

123839641
7083971: RNCC: 3 | RNVC: 2

30 Dec 2010

5120-12-323-9822
Box Wrench

123239822
DIN837-A11X13: RNCC: 2 | RNVC: 2
22-11X13: RNCC: 5 | RNVC: 9

14 Jan 1991

5120-12-374-4496
Flat Tip Screwdriver

123744496
08065070300: RNCC: 3 | RNVC: 2
08.06507-0300: RNCC: 5 | RNVC: 2

19 Feb 2008

5120-12-342-8418
Montierdorn

123428418
18 912 2605: RNCC: 3 | RNVC: 2

9 Apr 1997

5120-12-127-2807
Tonne Auftreibrohr

121272807
WU56: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-331-7364
Riemen Spanner

123317364
144600: RNCC: 3 | RNVC: 2
0144: RNCC: 3 | RNVC: 2
144 600: RNCC: 5 | RNVC: 9

15 Jun 1993

5120-12-141-9658
Mechanical Puller Adapter

121419658
Y218-31: RNCC: 3 | RNVC: 2
510: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-196-1538
Ausdrueckwerkzeug

121961538
VG95211-ML-121961538: RNCC: 2 | RNVC: 2
1.3-4033-407: RNCC: 3 | RNVC: 2
MAGERD 8767: RNCC: 5 | RNVC: 9

7 Jun 1983

5120-12-185-4812
Sheet Holder Forceps

121854812
2052: RNCC: 3 | RNVC: 2
230-2052: RNCC: 5 | RNVC: 2

9 Oct 1980

5120-12-147-6732
Socket Wrench

121476732
895-3-16: RNCC: 3 | RNVC: 2
201-3-16: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-303-6957
Spanner Wrench

123036957
DIN6368-22: RNCC: 2 | RNVC: 2
44743: RNCC: 3 | RNVC: 2
22DIN6368: RNCC: 5 | RNVC: 2

23 Apr 1985

5120-12-307-2507
Pipe Vise

123072507
3800064-3500: RNCC: 2 | RNVC: 2
SPANNBOCK: RNCC: 5 | RNVC: 9

27 May 1986

5120-12-172-6202
Open End Wrench

121726202
30-79350-5089: RNCC: 3 | RNVC: 2

31 Jan 1978

5120-12-329-8083
Cantilever Jaw Clamp

123298083
655A106: RNCC: 3 | RNVC: 9
18-168: RNCC: 5 | RNVC: 9

1 Oct 1992

5120-12-170-6928
Spanner Wrench

121706928
1213-100-6: RNCC: 3 | RNVC: 2
1213-100-6: RNCC: 5 | RNVC: 9

28 Jul 1977

5120-12-164-8834
Flat Tip Screwdriver

121648834
1900TRQ: RNCC: 3 | RNVC: 2
6004.03: RNCC: 3 | RNVC: 2
205-2-8-75: RNCC: 3 | RNVC: 2
1712310006: RNCC: 5 | RNVC: 2
205-2: RNCC: 5 | RNVC: 9
17123 10006: RNCC: 5 | RNVC: 9
0-6X2-8DIN5266: RNCC: 5 | RNVC: 9
DIN5266-0,6X2,8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-311-0462
We Montierwerkzeug

123110462
395589006300: RNCC: 3 | RNVC: 2

21 Jul 1987

5120-12-146-5139

5120-12-094-0366

5120-12-391-0558
Bearing And Bushing Inserter

123910558
F30378886: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-12-167-9550
Spanner Wrench

121679550
12709-22000W6: RNCC: 2 | RNVC: 2
335912-9016.000: RNCC: 3 | RNVC: 2
12709-22000W6: RNCC: 5 | RNVC: 2
12709-22000W6: RNCC: 5 | RNVC: 2
335912-9016.000: RNCC: 5 | RNVC: 9

7 Feb 1977

5120-12-381-9037
Hand Hammer

123819037
1060300S: RNCC: 3 | RNVC: 2

15 Apr 2010

5120-12-334-2714
Socket Wrench Set

123342714
D30GAU-10: RNCC: 3 | RNVC: 2
623954: RNCC: 5 | RNVC: 2

20 Apr 1994

5120-12-137-3328
Jaw Cable Grip

121373328
54013-30700: RNCC: 2 | RNVC: 2
169189101: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-3548
Socket Wrench Handle Bar

123053548
170X10X35X8: RNCC: 3 | RNVC: 2

25 Oct 1985

5120-12-381-7805
Socket Wrench

123817805
07151603: RNCC: 3 | RNVC: 2
A0715 16 03: RNCC: 5 | RNVC: 2
391819911910: RNCC: 6 | RNVC: 9
48982: RNCC: 6 | RNVC: 9

30 Mar 2010

5120-12-340-2651
Screw Thread Insert Tang Breakoff Tool

123402651
01580406000: RNCC: 3 | RNVC: 2

20 Mar 1996

5120-12-369-8521
Swivel Knob Jeweler's Screwdriver

123698521
05118008001: RNCC: 3 | RNVC: 2
2035-0,40X2,5X80: RNCC: 5 | RNVC: 2
118008: RNCC: 5 | RNVC: 9
2035-0,40X2,5: RNCC: 5 | RNVC: 9

22 Aug 2006

5120-12-120-5966
Hammer Handle

121205966
DIN5111-X-380-B-ES-LACKIERT: RNCC: 2 | RNVC: 2
46-380,ESCHE,GERADE: RNCC: 3 | RNVC: 2
00.76.31.65: RNCC: 5 | RNVC: 2
19-380: RNCC: 5 | RNVC: 9
380DIN5111: RNCC: 5 | RNVC: 9
380DIN5111BLACKIERT: RNCC: 5 | RNVC: 9
DIN5111-380-BLACKIERT: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-323-8083
Ratchet Wrench

123238083
629400-1: RNCC: 3 | RNVC: 2
62940-1: RNCC: 5 | RNVC: 2

20 Dec 1990

5120-12-185-4701
Socket Head Screw Key

121854701
05022910001: RNCC: 3 | RNVC: 2
352-3/16: RNCC: 5 | RNVC: 2
952-3-16: RNCC: 5 | RNVC: 9
22910: RNCC: 5 | RNVC: 9

9 Oct 1980

5120-12-181-8428
Hand Screw Starter

121818428
2784-4.5: RNCC: 3 | RNVC: 2
52725030: RNCC: 3 | RNVC: 9
2784-4-5: RNCC: 3 | RNVC: 9
106809: RNCC: 5 | RNVC: 2
2784-4,5: RNCC: 5 | RNVC: 2
2784-4-5MM: RNCC: 5 | RNVC: 2
0242632C00: RNCC: 5 | RNVC: 2

19 Dec 1979

5120-12-325-9828
Torque Wrench Adapter

123259828
TL5120-0086-060: RNCC: 2 | RNVC: 2
731/10-12: RNCC: 5 | RNVC: 9

2 Dec 1997

5120-12-163-6596
Spanner Wrench

121636596
26-21C1046P010: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-181-5090
Einpreszwerkzeug

121815090
143610: RNCC: 3 | RNVC: 2
181208: RNCC: 5 | RNVC: 2
89231041: RNCC: 5 | RNVC: 2
698-777-0000: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-372-2262
Hand Tube Swaging Tool Kit

123722262
268620-001: RNCC: 3 | RNVC: 2

28 Jun 2007

5120-12-332-8514
Socket Head Screw Key

123328514
6705031: RNCC: 3 | RNVC: 2
3-17460 NR6/SW14: RNCC: 5 | RNVC: 9

27 Sep 1993

5120-12-306-0090
Drive Pin Punch

123060090
3659D2,8: RNCC: 3 | RNVC: 2
3659D-2.9: RNCC: 5 | RNVC: 9
3659D2,9: RNCC: 5 | RNVC: 9

20 Jan 1986

5120-12-193-4470
Haltewerkzeug

121934470
116589014000: RNCC: 3 | RNVC: 2
116 589 01 4000: RNCC: 5 | RNVC: 2

22 Jul 1982

5120-12-388-8475
Drift Punch

123888475
711589021500: RNCC: 3 | RNVC: 2

27 Apr 2012

5120-12-154-2554
Spanner Wrench

121542554
R22749: RNCC: 3 | RNVC: 2
R22749: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-135-8961

5120-12-133-3224
Crimping Tool Die

121333224
05011: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-387-6822
Mechanical Puller Attachment

123876822
F6780532: RNCC: 3 | RNVC: 2

24 Jan 2012

5120-12-357-6249
Bearing And Bushing Inserter And Remover

123576249
7677 798 051: RNCC: 3 | RNVC: 2

8 Jul 2002

5120-12-321-2206
Box Wrench

123212206
2AK85: RNCC: 3 | RNVC: 2
2AK85: RNCC: 5 | RNVC: 2

19 Apr 1990

5120-12-182-4200
Kolben Spannband

121824200
130540: RNCC: 3 | RNVC: 9
4627: RNCC: 5 | RNVC: 9

30 Jan 1980

5120-12-134-2627
Aus Und Einbauvorri

121342627
009M01400: RNCC: 3 | RNVC: 2
VM53360: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-041-2669

5120-12-309-8496
Rohrbieger Rolle

123098496
840527-00.06: RNCC: 3 | RNVC: 2

11 Mar 1987

5120-12-361-1945
Boerdelwer Einsatz

123611945
80996060099: RNCC: 3 | RNVC: 2
80.99606-0099: RNCC: 5 | RNVC: 2

2 Sep 2003

5120-12-024-1249

5120-12-091-3176

5120-12-363-9550
Bearing And Bushing Inserter And Remover

123639550
T671P5002112: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-376-6943
Craftsman's Tweezers

123766943
65ASA: RNCC: 3 | RNVC: 2

29 Oct 2008

5120-12-121-6891

5120-12-172-9133
Socket Wrench

121729133
1X56122384: RNCC: 3 | RNVC: 2

2 Mar 1978

5120-12-005-0312

5120-12-334-6762
Swivel Knob Jeweler's Screwdriver

123346762
TL5120-0111-15: RNCC: 2 | RNVC: 2
010070: RNCC: 5 | RNVC: 9
2125-0,23X1,5: RNCC: 5 | RNVC: 9

8 Jun 1994

5120-12-171-1950
Montagewerkzeug

121711950
80.99617-0008: RNCC: 3 | RNVC: 2
80996170008: RNCC: 3 | RNVC: 2

16 Sep 1977

5120-12-152-0716
Dorn

121520716
23111-7199.10: RNCC: 2 | RNVC: 2
23111-7199.10: RNCC: 3 | RNVC: 2
23111-7199-10: RNCC: 5 | RNVC: 9
23111-7199.10: RNCC: 5 | RNVC: 9
23111-7199-10: RNCC: 5 | RNVC: 9
23111-7199-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-185-1347
Socket Wrench

121851347
P-895149-407: RNCC: 3 | RNVC: 2
P895149-407: RNCC: 5 | RNVC: 2
MAGERD2730: RNCC: 5 | RNVC: 9

13 Sep 1980

5120-12-123-5028
Open End Wrench

121235028
NO PRIMARY REF 12-123-5028: RNCC: 3 | RNVC: 2
10X11DIN658: RNCC: 5 | RNVC: 9
DIN658-10X11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-4563
Hand Beading Tool

123684563
FDIE-B100: RNCC: 3 | RNVC: 2

14 Mar 2006

5120-12-359-3716
Torque Wrench

123593716
AS565-1817A: RNCC: 3 | RNVC: 2
T622P30T0001: RNCC: 5 | RNVC: 2
T622P3002051: RNCC: 5 | RNVC: 9

29 Jan 2003

5120-12-368-2532
Open End Wrench

123682532
40035507-TCS: RNCC: 3 | RNVC: 2

17 Jan 2006

5120-12-323-4892
Mechanical Puller Attachment

123234892
01TC35284: RNCC: 3 | RNVC: 2

30 Nov 1990

5120-12-139-3061
Dr Anschluszstueck

121393061
8205891663: RNCC: 3 | RNVC: 2
073M00300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-379-2023
Bearing And Bushing Inserter And Remover

123792023
105-20001W4: RNCC: 3 | RNVC: 2

2 Jul 2009

5120-12-090-1685

5120-12-156-1530
Drive Pin Punch

121561530
NM350-13: RNCC: 3 | RNVC: 2
NM350-13: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-353-1126
Hand Shovel

123531126
B1186-00: RNCC: 3 | RNVC: 2
B1186-00: RNCC: 5 | RNVC: 2

29 Jan 2001

5120-12-194-0394
Mechanical Puller

121940394
3S55120-0000: RNCC: 3 | RNVC: 2
3S55120-0000-403: RNCC: 3 | RNVC: 2
3S55120-0000-405: RNCC: 5 | RNVC: 2
3S55120-0000-407: RNCC: 5 | RNVC: 2
MAGERD 1530: RNCC: 5 | RNVC: 9

27 Sep 1982

5120-12-302-5323
Schluessel

123025323
162 019: RNCC: 3 | RNVC: 9
162 019: RNCC: 3 | RNVC: 9
162019: RNCC: 5 | RNVC: 9
162 019: RNCC: 5 | RNVC: 9

10 Jan 1985

5120-12-120-6782
Socket Wrench Handle Bar

121206782
14018937600: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-021-6828

5120-12-303-3135
Aligning Punch

123033135
206589016100: RNCC: 3 | RNVC: 2

13 Mar 1985

5120-12-311-6135
Socket Head Screw Key

123116135
M542172: RNCC: 3 | RNVC: 9
M542172: RNCC: 5 | RNVC: 2

25 Sep 1987

5120-12-389-2771
Lamp Extractor

123892771
129589000900: RNCC: 3 | RNVC: 2
129589000900: RNCC: 5 | RNVC: 2

15 Jun 2012

5120-12-369-4685
Drive Pin Punch

123694685
HD 1016: RNCC: 3 | RNVC: 2
01.55.24.04: RNCC: 5 | RNVC: 2

6 Jul 2006

5120-12-005-0494

5120-12-370-9505
Spanner Wrench

123709505
4002-2SW: RNCC: 3 | RNVC: 2

19 Jan 2007

5120-12-325-7726
Okular Zange

123257726
3V5050-A: RNCC: 3 | RNVC: 2
3V5050-A: RNCC: 5 | RNVC: 9

8 Jul 1991

5120-12-316-7643
Socket Wrench

123167643
DIN7440-10X200: RNCC: 2 | RNVC: 9
9804-10: RNCC: 3 | RNVC: 2
137410: RNCC: 3 | RNVC: 2
2900-VDE10: RNCC: 3 | RNVC: 9
1448072: RNCC: 5 | RNVC: 2

9 Feb 1989

5120-12-121-8217
Electron Tube Extractor

121218217
NO PRIMARY REF 12-121-8217: RNCC: 3 | RNVC: 2
VS0502T080: RNCC: 5 | RNVC: 2
VS0502T080: RNCC: 5 | RNVC: 9
VS502T80: RNCC: 5 | RNVC: 9
KLEINERROEHRENHEBER: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-093-7223

5120-12-304-6980
Socket Wrench Socket

123046980
120310: RNCC: 3 | RNVC: 2

13 Aug 1985

5120-12-154-9461
Hand Material Handling Hook

121549461
510047: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-301-7879
Dreh Winkelscheibe

123017879
F600000277750: RNCC: 3 | RNVC: 2

9 Nov 1984

5120-12-349-4016
Socket Wrench

123494016
0986611398: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-304-5224
Schluesseleinsatz

123045224
31R11: RNCC: 3 | RNVC: 2
624535: RNCC: 5 | RNVC: 2

26 Jul 1985

5120-12-360-0236
Electrical Contact Remover

123600236
VG95236T04BA002: RNCC: 2 | RNVC: 2

28 Mar 2003

5120-12-173-9556
Open End Wrench

121739556
NO PRIMARY REF 12-173-9556: RNCC: 3 | RNVC: 2
103209: RNCC: 5 | RNVC: 9
C900M4X5: RNCC: 5 | RNVC: 9

23 May 1978

5120-12-133-3627
Screwdriver Bit

121333627
176-181: RNCC: 3 | RNVC: 2
A44-22: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-363-8430
Bearing And Bushing Inserter

123638430
T671P5001257: RNCC: 3 | RNVC: 2

30 Jul 2004

5120-12-343-7273
Swivel Knob Jeweler's Screwdriver

123437273
240 035 90: RNCC: 3 | RNVC: 2
T4880X 315: RNCC: 3 | RNVC: 2

17 Jul 1997

5120-12-388-1493
Hydraulic Jac Base

123881493
865346901: RNCC: 3 | RNVC: 2

28 Feb 2012

5120-12-193-6676

5120-12-383-5009
Vise Jaw Set

123835009
5.4086: RNCC: 3 | RNVC: 2

28 Oct 2010

5120-12-330-4366
Mechanical Puller Attachment

123304366
26-21C1012G002P8: RNCC: 3 | RNVC: 2

15 Dec 1992

5120-12-121-5986
Untergestell

121215986
LPUU400: RNCC: 3 | RNVC: 2
7758-400X400: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-172-3927
Box Wrench

121723927
30-79350-5157: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-12-133-3690
Abstell Und Hebel

121333690
5D10393: RNCC: 3 | RNVC: 2
714-181: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-163-6078
Einbauwerkzeug

121636078
NO PRIMARY REF 12-163-6078: RNCC: 3 | RNVC: 2
105-14101-38W1: RNCC: 5 | RNVC: 2
105-14101.38W1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-338-0858
Screwdriver Bit Set And Handle

123380858
56-0049-000-00VM1: RNCC: 3 | RNVC: 2

18 May 1995

5120-12-133-3763
Socket Wrench Crowfoot Attachment

121333763
540A11-16: RNCC: 3 | RNVC: 2
FC22: RNCC: 3 | RNVC: 2
FC022: RNCC: 5 | RNVC: 2
02500038: RNCC: 5 | RNVC: 2
AN8506-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-130-6345
Socket Wrench Socket

121306345
32DWN30: RNCC: 3 | RNVC: 2
90198: RNCC: 5 | RNVC: 2
32DWN30: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-377-1167
Quick Adjusting Screw Clamp

123771167
STB40M: RNCC: 3 | RNVC: 2

11 Dec 2008

5120-12-363-1300
Aufbl Steuergeraet

123631300
127 07 000: RNCC: 3 | RNVC: 2
1270700: RNCC: 5 | RNVC: 9

6 May 2004

5120-12-312-4098
Socket Wrench Adapter

123124098
KDEP2921: RNCC: 3 | RNVC: 2
KDEP 2921: RNCC: 5 | RNVC: 2

29 Dec 1987

5120-12-340-1992
Montierhuelse

123401992
80996066015: RNCC: 3 | RNVC: 2
9200424000: RNCC: 3 | RNVC: 2
920042-4000: RNCC: 5 | RNVC: 2

13 Mar 1996

5120-12-179-5815
Cable Type Ratchet Lever Puller

121795815
TU32RAL6014: RNCC: 3 | RNVC: 2
TU32: RNCC: 5 | RNVC: 2

11 Jul 1979

5120-12-344-6440
Seal Inserter

123446440
99370420: RNCC: 3 | RNVC: 2

19 Nov 1997

5120-12-192-7120
Socket Wrench Socket

121927120
01TC32554: RNCC: 3 | RNVC: 2
01TC32123: RNCC: 5 | RNVC: 9

17 May 1982

5120-12-190-8622
Fuehrungsscheibe

121908622
NO PRIMARY REF 12-190-8622: RNCC: 3 | RNVC: 2
416250: RNCC: 5 | RNVC: 9

17 Dec 1981

5120-12-314-6499
Montierwerk Huelse

123146499
F11.49065-0356: RNCC: 3 | RNVC: 2

26 Jul 1988

5120-12-390-2603
Centering Ring

123902603
80996040313: RNCC: 3 | RNVC: 2
80.99604-0313: RNCC: 5 | RNVC: 2

23 Oct 2012

5120-12-140-9696
Kolbenb Druckstueck

121409696
0277083000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-385-5447
Pliers

123855447
515.BB03: RNCC: 3 | RNVC: 2

15 Jun 2011

5120-12-152-7219
Schluesseleinsatz

121527219
PV618: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-315-6035
Lamp Extractor

123156035
06762005: RNCC: 3 | RNVC: 9

11 Nov 1988

5120-12-333-4592
Socket Wrench Set

123334592
7819HNRN: RNCC: 3 | RNVC: 2
1831486: RNCC: 5 | RNVC: 2
19MRN-CS: RNCC: 5 | RNVC: 9
204269: RNCC: 5 | RNVC: 9

20 Dec 1993

5120-12-357-3295
Torque Wrench

123573295
8565-01: RNCC: 3 | RNVC: 2
8565-01: RNCC: 5 | RNVC: 9

7 Jun 2002

5120-12-140-3487
Electronic Equipment Alignment Tool

121403487
NO PRIMARY REF 12-140-3487: RNCC: 3 | RNVC: 2
5600F: RNCC: 5 | RNVC: 9
108754: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-131-6815
Socket Wrench

121316815
1093015-00002: RNCC: 3 | RNVC: 2
1093015-00002: RNCC: 5 | RNVC: 2
1093015-00002: RNCC: 5 | RNVC: 2
1093015-00002: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-349-3868
Torque Wrench

123493868
591801-9105.000: RNCC: 3 | RNVC: 2

9 Nov 1999

5120-12-010-1369

5120-12-341-5124
Spanner Wrench

123415124
M514294: RNCC: 3 | RNVC: 9

12 Sep 1996

5120-12-365-4793
Pliers

123654793
T3771D 120: RNCC: 3 | RNVC: 2

7 Jan 2005

5120-12-192-1063
Schluesseleinsatz

121921063
4D22126: RNCC: 3 | RNVC: 2
4D22126: RNCC: 5 | RNVC: 2
4D22126: RNCC: 5 | RNVC: 2

23 Mar 1982

5120-12-161-6220
Socket Wrench

121616220
1712180106: RNCC: 3 | RNVC: 2
17121 80106: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5283
Open End Box Wrench

121235283
1949Z-1-1.1/8: RNCC: 3 | RNVC: 2
91359191: RNCC: 5 | RNVC: 2
1055547: RNCC: 5 | RNVC: 2
1949Z1X1 1-8: RNCC: 5 | RNVC: 9
05230: RNCC: 5 | RNVC: 9
1410120006: RNCC: 5 | RNVC: 9
612A-1X1 1/8: RNCC: 5 | RNVC: 9
612A-1X1 1X8+: RNCC: 5 | RNVC: 9
612A1X1 1-8: RNCC: 5 | RNVC: 9
105554: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-155-9782
Aufziehvorrichtung

121559782
25704-364000.00.0: RNCC: 2 | RNVC: 2
25704-364000.00.0: RNCC: 3 | RNVC: 2
25704-364000-00-0: RNCC: 5 | RNVC: 2
25704-364000.00.0: RNCC: 5 | RNVC: 2
25704-364000-00-0: RNCC: 5 | RNVC: 2
25704-364000-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-129-4496
Screwdriver Bit

121294496
NO PRIMARY REF 12-129-4496: RNCC: 3 | RNVC: 2
10K3: RNCC: 5 | RNVC: 9
205923: RNCC: 5 | RNVC: 9
10K3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-7323
Druckstueck

121767323
VG95211-ML-121767323: RNCC: 2 | RNVC: 2
105-21832W1.18: RNCC: 3 | RNVC: 2
105-21832W1-18: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-023-1491

5120-12-126-2563

5120-12-023-3247

5120-12-126-2868
Naehkloben

121262868
JD5120-12-126-2868: RNCC: 3 | RNVC: 2
1066: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-132-0152
Box Wrench

121320152
0329918010: RNCC: 3 | RNVC: 2
TWH20-232: RNCC: 5 | RNVC: 2
TWH20-232: RNCC: 5 | RNVC: 2
TWH20-232: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-338-2581
Schluessel

123382581
363589012100: RNCC: 3 | RNVC: 2
363 589 01 21 00: RNCC: 5 | RNVC: 2

12 Jun 1995

5120-12-350-4796
Mechanical Puller

123504796
1668468: RNCC: 3 | RNVC: 2
1569812: RNCC: 5 | RNVC: 2

4 Apr 2000

5120-12-196-0640
Hand Vise

121960640
4982040: RNCC: 3 | RNVC: 2
MAGERD 0562: RNCC: 5 | RNVC: 9

25 May 1983

5120-12-133-7993

5120-12-193-9162
Torque Wrench

121939162
NO PRIMARY REF 12-193-9162: RNCC: 3 | RNVC: 2
73NM/6: RNCC: 5 | RNVC: 9
50240006: RNCC: 5 | RNVC: 9

7 Sep 1996

5120-12-153-4984
Socket Wrench Socket

121534984
CH1983-1-11: RNCC: 3 | RNVC: 2
6-0864-24-0-0651: RNCC: 5 | RNVC: 9
6.0864.24.0.0651: RNCC: 5 | RNVC: 9
CH1983-1-11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-0853
Box Wrench

121270853
NO PRIMARY REF 12-127-0853: RNCC: 3 | RNVC: 2
22A1-4X5-16: RNCC: 5 | RNVC: 9
41461620: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-326-0174
Bearing And Bushing Inserter

123260174
102589121500: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-305-6434
Machinist's Scriber

123056434
35071010: RNCC: 3 | RNVC: 9

28 Nov 1985

5120-12-186-1943
Zentrierbuchse

121861943
23303-264300-04-0: RNCC: 3 | RNVC: 2
23303-264300-04-0: RNCC: 5 | RNVC: 2
23303-264300.04.0: RNCC: 5 | RNVC: 2

5 Dec 1980

5120-12-177-3633
Ausdruecker

121773633
713A095-35: RNCC: 3 | RNVC: 9

29 Jan 1979

5120-12-306-2312
Spanner Wrench

123062312
BD9101E599: RNCC: 3 | RNVC: 2
BD9101E599: RNCC: 5 | RNVC: 9

7 Feb 1986

5120-12-323-4627
Woven Cable Grip

123234627
01531: RNCC: 3 | RNVC: 2

28 Nov 1990

5120-12-120-6772
Surveying Instrument Adjusting Pin

121206772
5412B: RNCC: 3 | RNVC: 2
108430: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-177-3181
Schlagstueck

121773181
23290-268041.000: RNCC: 2 | RNVC: 2
23290-268041.000: RNCC: 3 | RNVC: 2
23290-268041: RNCC: 5 | RNVC: 9

29 Jan 1979

5120-12-196-4553
Magnetic Retrieving Tool

121964553
360/2: RNCC: 3 | RNVC: 2
51156020: RNCC: 3 | RNVC: 2
5120-12-140-6258: RNCC: 6 | RNVC: 9

11 Jul 1983

5120-12-123-5505
Socket Wrench

121235505
NO PRIMARY REF 12-123-5505: RNCC: 3 | RNVC: 2
105355: RNCC: 5 | RNVC: 9
1945NBZ9-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-354-7172
Torque Wrench

123547172
71/20: RNCC: 3 | RNVC: 2

17 Aug 2001

5120-12-179-9709
Box Wrench

121799709
170300B: RNCC: 3 | RNVC: 2
99354219: RNCC: 3 | RNVC: 2
80.99603-0097: RNCC: 5 | RNVC: 2
80996030097: RNCC: 5 | RNVC: 2
H201-3: RNCC: 5 | RNVC: 9
H201-3: RNCC: 5 | RNVC: 9
H201-3: RNCC: 5 | RNVC: 9

14 Aug 1979

5120-12-179-9679
Socket Wrench Handle

121799679
1993GU3: RNCC: 3 | RNVC: 2
08.06631-9016: RNCC: 5 | RNVC: 2
08066319016: RNCC: 5 | RNVC: 2
6144320: RNCC: 5 | RNVC: 2
18/LTT 237 03: RNCC: 5 | RNVC: 2
065205: RNCC: 5 | RNVC: 9
770-L1GF: RNCC: 5 | RNVC: 9
614432: RNCC: 5 | RNVC: 9
7151390: RNCC: 5 | RNVC: 9
8030-10C: RNCC: 5 | RNVC: 9

14 Aug 1979

5120-12-123-5573

5120-12-702-8642
Hand Hammer

127028642
52-04066120737: RNCC: 3 | RNVC: 2

8 Jan 1996

5120-12-155-9502
Socket Wrench Extension

121559502
NM297-01: RNCC: 3 | RNVC: 2
NM297-01: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-304-9461
Mechanical Puller

123049461
6798807W11: RNCC: 3 | RNVC: 2

10 Sep 1985

5120-12-155-8789
Zusammensetzer

121558789
4211031: RNCC: 3 | RNVC: 2
17628: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-180-2928
Box Wrench

121802928
DIN7447-17: RNCC: 2 | RNVC: 2
161317: RNCC: 3 | RNVC: 2
1447773: RNCC: 5 | RNVC: 2
2VDE17: RNCC: 5 | RNVC: 9

31 Aug 1979

5120-12-388-5848
Socket Head Screw Key Set

123885848
34753: RNCC: 3 | RNVC: 2
369H9S: RNCC: 5 | RNVC: 2

3 Apr 2012

5120-12-358-2658
Screwdriver Bit

123582658
614787455: RNCC: 3 | RNVC: 2
614 787 455: RNCC: 5 | RNVC: 2

2 Oct 2002

5120-12-139-3104

5120-12-139-3122

5120-12-090-1856

5120-12-194-4812
Socket Wrench

121944812
P8: RNCC: 3 | RNVC: 2
PS120-P8: RNCC: 5 | RNVC: 2

8 Nov 1982

5120-12-364-3119
Socket Wrench Extension

123643119
11010006-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-132-4305

5120-12-140-7635
Socket Wrench

121407635
DIN3112-12: RNCC: 2 | RNVC: 2
12DIN3112: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-121-5869
Float

121215869
8830-260X120: RNCC: 3 | RNVC: 2
3149: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-321-2388
Gl Montierwerkzeug

123212388
7 129 13 03 00: RNCC: 3 | RNVC: 2
7-129-13-03-00: RNCC: 5 | RNVC: 2
SUS-9-0303: RNCC: 5 | RNVC: 2

20 Apr 1990

5120-12-379-7963
Socket Wrench Set

123797963
87AN: RNCC: 3 | RNVC: 2
96034101: RNCC: 5 | RNVC: 2
4018754079940: RNCC: 5 | RNVC: 2

2 Sep 2009

5120-12-321-7966
Zy Montierwerkzeug

123217966
41451-T600: RNCC: 3 | RNVC: 2

27 Jun 1990

5120-12-176-0474
Open End Wrench

121760474
C900M30X36: RNCC: 3 | RNVC: 2
103189: RNCC: 5 | RNVC: 2
905034: RNCC: 5 | RNVC: 9
C900M30X36: RNCC: 6 | RNVC: 9

6 Nov 1978

5120-12-379-1873
Hand Hammer

123791873
5135030025: RNCC: 3 | RNVC: 2
137.912: RNCC: 5 | RNVC: 2

1 Jul 2009

5120-12-335-3147
Schluesseleinsatz

123353147
0852 1519: RNCC: 3 | RNVC: 2
8521519: RNCC: 5 | RNVC: 2

9 Aug 1994

5120-12-126-4680
Electronic Equipment Alignment Tool

121264680
5509-3: RNCC: 3 | RNVC: 2
108690: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-379-4906
Gas Torch

123794906
3.5555: RNCC: 3 | RNVC: 2
4004625355558: RNCC: 5 | RNVC: 2
ROFIRE PIEZO 1950 C: RNCC: 5 | RNVC: 2

29 Jul 2009

5120-12-377-5053
Flat Tip And Cross Tip Screwdriver Set

123775053
117800: RNCC: 3 | RNVC: 2

21 Jan 2009

5120-12-377-3120
Trench Brace

123773120
063407: RNCC: 3 | RNVC: 2

7 Jan 2009

5120-12-391-9602
Socket Wrench Handle

123919602
425QR: RNCC: 3 | RNVC: 2
12071000: RNCC: 5 | RNVC: 2

22 Apr 2013

5120-12-150-7593
Socket Wrench

121507593
4900084-200040: RNCC: 3 | RNVC: 2
510273: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-345-6804
Zentrier- Kegel

123456804
U100-3771-006: RNCC: 3 | RNVC: 2

15 Apr 1998

5120-12-197-0855
Hand Hammer

121970855
5064.02-1000: RNCC: 3 | RNVC: 2
75009-1000: RNCC: 5 | RNVC: 9

19 Sep 1983

5120-12-192-6509
Retaining Ring Pliers

121926509
NM276-03: RNCC: 3 | RNVC: 2
NM276-03: RNCC: 5 | RNVC: 9

12 May 1982

5120-12-168-2634
Spanner Wrench

121682634
WMR0EM4-120-112: RNCC: 2 | RNVC: 2

2 Mar 1977

5120-12-188-3957
Spreitzstueck

121883957
99366664: RNCC: 3 | RNVC: 2
120630-1: RNCC: 3 | RNVC: 2
E5835-00-07: RNCC: 5 | RNVC: 2

6 Jul 1981

5120-12-371-9003
Plier Clamp

123719003
651409: RNCC: 3 | RNVC: 2

29 May 2007

5120-12-314-6933
Socket Head Screw Key

123146933
334-62: RNCC: 3 | RNVC: 2

29 Jul 1988

5120-12-173-5047
Montagevorrichtung

121735047
837589273100: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-12-344-5996
Mechanical Puller

123445996
1X56136589: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-364-5625
Open End Wrench

123645625
40032123-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-364-5668
Open End Wrench

123645668
40030607-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-373-4304
Drift

123734304
1X46174756: RNCC: 3 | RNVC: 2
1X46174756: RNCC: 5 | RNVC: 2

31 Oct 2007

5120-12-326-1592
Pliers

123261592
F30372352: RNCC: 3 | RNVC: 2

13 Aug 1991

5120-12-371-5925
Ausdrueckwerkzeug

123715925
602589023300: RNCC: 3 | RNVC: 2

20 Apr 2007

5120-12-185-5499
Montagewerkzeug

121855499
V7060-023-000-11: RNCC: 3 | RNVC: 2

14 Oct 1980

5120-12-171-1942
Bearing And Bushing Inserter

121711942
NO PRIMARY REF 12-171-1942: RNCC: 3 | RNVC: 2
80.99616-0039: RNCC: 5 | RNVC: 2
80996160039: RNCC: 5 | RNVC: 2

16 Sep 1977

5120-12-311-0308
Electrical Connector Inserter

123110308
VG95211-ML-123110308: RNCC: 2 | RNVC: 2
1486-341-008-01: RNCC: 3 | RNVC: 2

20 Jul 1987

5120-12-320-2776
Socket Wrench Crowfoot Attachment

123202776
540-12: RNCC: 3 | RNVC: 2

22 Dec 1989

5120-12-198-0207
Spanner Wrench

121980207
1136.14.01-1000: RNCC: 3 | RNVC: 2

12 Dec 1983

5120-12-343-6125
Spanner Wrench

123436125
000-001: RNCC: 3 | RNVC: 2
000-001: RNCC: 5 | RNVC: 2

8 Jul 1997

5120-12-020-5470

5120-12-133-4577
Socket Wrench

121334577
027M00900: RNCC: 3 | RNVC: 2
5185891908: RNCC: 3 | RNVC: 2
518589190800: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-363-8427
Bearing And Bushing Inserter

123638427
T671P5001254: RNCC: 3 | RNVC: 2

30 Jul 2004

5120-12-390-1513
Quick Adjusting Screw Clamp

123901513
SQ-4-SP-BG: RNCC: 3 | RNVC: 2

10 Oct 2012

5120-12-121-1552
Flat Tip Screwdriver

121211552
186-3,0X300: RNCC: 3 | RNVC: 2
002107: RNCC: 5 | RNVC: 2
4010995002107: RNCC: 5 | RNVC: 2
010475: RNCC: 5 | RNVC: 9
2035-0,5X3X300: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-159-5661
Dichtpac Auszieher

121595661
44E182-14: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-171-3432
Pliers

121713432
NO PRIMARY REF 12-171-3432: RNCC: 3 | RNVC: 2
225DIN5247GLATT: RNCC: 5 | RNVC: 9
DIN5247-225GLATT: RNCC: 5 | RNVC: 9

30 Sep 1977

5120-12-187-3364
Combination Box And Open End Wrench

121873364
NO PRIMARY REF 12-187-3364: RNCC: 3 | RNVC: 2
600W7-8: RNCC: 5 | RNVC: 2
600W7/8: RNCC: 5 | RNVC: 9

30 Mar 1981

Load More Results