What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 15 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 15 of 62

5120-12-120-6688
Swivel Knob Jeweler's Screwdriver

121206688
52705500: RNCC: 3 | RNVC: 2
415-3: RNCC: 3 | RNVC: 9
0-5X3DIN8320MESSINGVERNICKELT: RNCC: 5 | RNVC: 9
DIN8320-A0,5X3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-195-8390
Auswechselwerkzeug

121958390
P-896880: RNCC: 3 | RNVC: 2
P-896880-403: RNCC: 5 | RNVC: 2
P-896880-407: RNCC: 5 | RNVC: 2
P896880-403: RNCC: 5 | RNVC: 2
P896880-405: RNCC: 5 | RNVC: 2
P896880-407: RNCC: 5 | RNVC: 2
P-896880-405: RNCC: 5 | RNVC: 2
MAGERD 2720: RNCC: 5 | RNVC: 9

21 Apr 1983

5120-12-121-5707
Hammer Handle

121215707
DIN5112-600-B-ES: RNCC: 2 | RNVC: 2
44-600,ESCHE: RNCC: 3 | RNVC: 2
600X42-1DIN5112: RNCC: 5 | RNVC: 9
600X42-1DIN5112BGEFIRNISZT: RNCC: 5 | RNVC: 9
20-600: RNCC: 5 | RNVC: 9
DIN5112-600X42,1BGEFIRNISZT: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-5311
Ratchet Wrench

123815311
26A-3/8X7/16: RNCC: 3 | RNVC: 2
41552428: RNCC: 5 | RNVC: 2

1 Mar 2010

5120-12-121-8658
Quick Adjusting Screw Clamp

121218658
DIN5117-150: RNCC: 2 | RNVC: 2
TG16: RNCC: 3 | RNVC: 2
E16-8: RNCC: 3 | RNVC: 2
6001508: RNCC: 3 | RNVC: 2
6-3: RNCC: 3 | RNVC: 2
0100/HOLZ03: RNCC: 3 | RNVC: 9
00.20.32.92: RNCC: 5 | RNVC: 2
150DIN5117: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-362-1466
Socket Wrench Socket

123621466
A6800DZ-7/32: RNCC: 3 | RNVC: 2
00.44.63.01: RNCC: 5 | RNVC: 2
1758110: RNCC: 5 | RNVC: 2

14 Jan 2004

5120-12-361-9968
Socket Wrench Set

123619968
96593420: RNCC: 3 | RNVC: 2

15 Dec 2003

5120-12-384-0630
Pin Inserter

123840630
520049: RNCC: 3 | RNVC: 2

18 Jan 2011

5120-12-377-0855
Seal Inserter And Remover

123770855
600800107: RNCC: 3 | RNVC: 2

10 Dec 2008

5120-12-172-6379
Einstellvorrichtung

121726379
1X56099065: RNCC: 3 | RNVC: 2
V99065: RNCC: 5 | RNVC: 2

31 Jan 1978

5120-12-093-7588

5120-12-094-1216

5120-12-123-7102

5120-12-384-5679
Socket Head Screw Key

123845679
F30002816: RNCC: 3 | RNVC: 2

9 Mar 2011

5120-12-333-4793
Mast Einsetzer

123334793
9108510103: RNCC: 3 | RNVC: 2

22 Dec 1993

5120-12-378-6735
Mounting Lever

123786735
312475: RNCC: 3 | RNVC: 2

30 Apr 2009

5120-12-041-2670

5120-12-168-8170
Reifenmontiereisens

121688170
2234A: RNCC: 3 | RNVC: 2

6 Apr 1977

5120-12-384-8268
Plastic Mallet

123848268
51.000.034: RNCC: 3 | RNVC: 2
53.000.030: RNCC: 3 | RNVC: 2
53.000.030: RNCC: 5 | RNVC: 2
51.000.034: RNCC: 5 | RNVC: 2

1 Apr 2011

5120-12-123-5518
Socket Wrench

121235518
1501: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-146-5134

5120-12-090-1528

5120-12-363-9843
Bearing And Bushing Inserter

123639843
T671P5002256: RNCC: 3 | RNVC: 2

10 Aug 2004

5120-12-177-5050
Spanner Wrench

121775050
700503-8077W1: RNCC: 3 | RNVC: 2
700503-8077W1: RNCC: 5 | RNVC: 9

5 Feb 1979

5120-12-361-1198
Box Wrench

123611198
CBD32558P05: RNCC: 3 | RNVC: 2

26 Aug 2003

5120-12-361-2884
Socket Wrench Extension

123612884
9835125: RNCC: 3 | RNVC: 2
020530: RNCC: 5 | RNVC: 2

12 Sep 2003

5120-12-365-9168
Swivel Knob Jeweler's Screwdriver

123659168
T4882X 11: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-378-5614
Boiler Tube Wire Brush

123785614
826703: RNCC: 3 | RNVC: 2

22 Apr 2009

5120-12-368-2527
Socket Wrench Screwdriver Attachment

123682527
01120003-TCS: RNCC: 3 | RNVC: 2

17 Jan 2006

5120-12-351-8925
Seal Inserter

123518925
5870 048 225: RNCC: 3 | RNVC: 2

11 Sep 2000

5120-12-138-5633

5120-12-094-0369

5120-12-356-3020
Lifting Pneumatic Bag Kit

123563020
416.9100: RNCC: 3 | RNVC: 2

13 Feb 2002

5120-12-140-2926

5120-12-339-4920
Screwdriver Bit Set And Handle

123394920
M612242: RNCC: 3 | RNVC: 9

28 Nov 1995

5120-12-185-9325
Lager- Und Einsatz

121859325
5870055061: RNCC: 3 | RNVC: 2
2250340: RNCC: 5 | RNVC: 2
5870055061: RNCC: 5 | RNVC: 9

11 Nov 1980

5120-12-327-7355
Electrical Contact Remover

123277355
0999-000-0087: RNCC: 3 | RNVC: 2

25 Feb 1992

5120-12-324-4722
Drive Pin Punch

123244722
335910-0106.000: RNCC: 2 | RNVC: 2
335910-0106.000: RNCC: 3 | RNVC: 2
335910-0106.000: RNCC: 5 | RNVC: 9

20 Feb 1991

5120-12-385-5800
Piston Ring Expander

123855800
034.110: RNCC: 3 | RNVC: 2
11.49002-0035: RNCC: 5 | RNVC: 2
034.110: RNCC: 5 | RNVC: 2
11.49002-0035: RNCC: 5 | RNVC: 2

17 Jun 2011

5120-12-150-1563
Loetvorrichtung

121501563
TFS49-99020: RNCC: 3 | RNVC: 2
TFS49-99020: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-9819
Vise Jaw Caps

121749819
3S55053-0000: RNCC: 3 | RNVC: 2

15 Aug 1978

5120-12-133-6828

5120-12-177-7493
Electronic Equipment Alignment Tool

121777493
1-306: RNCC: 3 | RNVC: 2

16 Feb 1979

5120-12-186-3397
Electronic Equipment Alignment Tool

121863397
1-906: RNCC: 3 | RNVC: 2

17 Dec 1980

5120-12-365-0103
Flat Tip Screwdriver

123650103
4-632: RNCC: 3 | RNVC: 2

23 Nov 2004

5120-12-338-2552
Lamp Extractor

123382552
11-906.0: RNCC: 3 | RNVC: 2

12 Jun 1995

5120-12-156-1536
Socket Wrench

121561536
NM392-10: RNCC: 3 | RNVC: 2
NM392-10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-337-2250
We Montierwerkzeug

123372250
11.49009-0070: RNCC: 3 | RNVC: 2
055.077: RNCC: 5 | RNVC: 2
055.077: RNCC: 5 | RNVC: 9
11.49009-0070: RNCC: 5 | RNVC: 9

3 Feb 1995

5120-12-173-4211
Hand Screw Starter

121734211
8067-4-5X100: RNCC: 3 | RNVC: 9
C5719296N: RNCC: 5 | RNVC: 2
131818: RNCC: 5 | RNVC: 2

13 Apr 1978

5120-12-196-1541
Einbauwerkz Spindel

121961541
VG95211-ML-121961541: RNCC: 2 | RNVC: 2
1.3-4037-407: RNCC: 3 | RNVC: 2
MAGERD 8771: RNCC: 5 | RNVC: 9

7 Jun 1983

5120-12-304-6223
Screw Thread Insert Inserter

123046223
23305-264500-02-0: RNCC: 2 | RNVC: 2

6 Aug 1985

5120-12-121-8025
Blacksmith's Punch

121218025
5057-02-12: RNCC: 3 | RNVC: 2
5057ES12: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-140-5905

5120-12-319-4528
Lager- Und Einsatz

123194528
99374309: RNCC: 3 | RNVC: 2

3 Oct 1989

5120-12-196-7853
Ratchet Wrench

121967853
RBM1719S: RNCC: 3 | RNVC: 2

16 Aug 1983

5120-12-198-6070
Mechanical Puller Forcing Screw

121986070
5870204015: RNCC: 3 | RNVC: 2
026060: RNCC: 5 | RNVC: 2
5870204015: RNCC: 5 | RNVC: 9

14 Feb 1984

5120-12-302-7414
Socket Wrench Screwdriver Attachment

123027414
FP01.17C: RNCC: 3 | RNVC: 2

28 Jan 1985

5120-12-184-4260
Flat Tip Screwdriver

121844260
1900TRG: RNCC: 3 | RNVC: 2

24 Jul 1980

5120-12-135-7855
Mechanical Puller

121357855
WA28445: RNCC: 3 | RNVC: 2
WA28445: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-6134
Socket Wrench Crowfoot Attachment

123646134
02190022-TCS: RNCC: 3 | RNVC: 2

14 Oct 2004

5120-12-023-1447

5120-12-340-2333
Mechanical Puller Attachment

123402333
0851 4781.001: RNCC: 3 | RNVC: 2
1386965: RNCC: 5 | RNVC: 9

16 Mar 1996

5120-12-390-1232
Seal Remover

123901232
437589013300: RNCC: 3 | RNVC: 2

8 Oct 2012

5120-12-145-8056
Aufpreszvorrichtung

121458056
838589024300: RNCC: 3 | RNVC: 2
8385890243: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-177-1091

5120-12-139-3102

5120-12-312-6630
Torque Wrench Adapter

123126630
4987016: RNCC: 3 | RNVC: 2

25 Jan 1988

5120-12-336-5100
Bearing And Bushing Inserter

123365100
0852 0676: RNCC: 3 | RNVC: 2
8520676: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-333-9607
Hand Terminal Crimping Tool

123339607
971900: RNCC: 3 | RNVC: 9

2 Mar 1994

5120-12-139-5766

5120-12-357-6131
Socket Wrench

123576131
909120616: RNCC: 3 | RNVC: 2

8 Jul 2002

5120-12-163-5257
Mechanical Puller

121635257
60382300: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-092-2303

5120-12-317-6845
Mechanical Puller

123176845
2169-9960-010: RNCC: 3 | RNVC: 2
2169-9960-010: RNCC: 5 | RNVC: 9

28 Apr 1989

5120-12-356-8469
Montierdorn

123568469
E102541/28: RNCC: 3 | RNVC: 2

10 Apr 2002

5120-12-322-3766
Spanner Wrench

123223766
12791-110000.024: RNCC: 2 | RNVC: 2
009-039.110-024W5: RNCC: 3 | RNVC: 2
12791-110000.024: RNCC: 5 | RNVC: 2

16 Aug 1990

5120-12-388-9502
Driftpin

123889502
80996030363: RNCC: 3 | RNVC: 2
80.99603-0363: RNCC: 5 | RNVC: 2

9 May 2012

5120-12-183-7687
Spanner Wrench

121837687
6063903: RNCC: 3 | RNVC: 2
5234-120000: RNCC: 5 | RNVC: 2

20 May 1980

5120-12-376-7784
Combination Box And Open End Wrench

123767784
6512490: RNCC: 3 | RNVC: 2
4010886651247: RNCC: 5 | RNVC: 2
534-14: RNCC: 5 | RNVC: 2
6512490: RNCC: 5 | RNVC: 2
4010886651247: RNCC: 5 | RNVC: 2
534-14: RNCC: 5 | RNVC: 2

6 Nov 2008

5120-12-175-5308
Wrench Kit

121755308
W396: RNCC: 2 | RNVC: 9
5120-00306: RNCC: 6 | RNVC: 9

25 Sep 1978

5120-12-336-7207
Oelfilt Schluessel

123367207
2169-1: RNCC: 3 | RNVC: 2
F30045822: RNCC: 3 | RNVC: 2
5719640009: RNCC: 5 | RNVC: 2
F3 0045822: RNCC: 5 | RNVC: 2

14 Dec 1994

5120-12-383-5085
Mounting Lever

123835085
308292: RNCC: 3 | RNVC: 2

2 Nov 2010

5120-12-383-4581
Mechanical Puller

123834581
T661P1004106: RNCC: 3 | RNVC: 2

22 Oct 2010

5120-12-350-4791
Montierdorn

123504791
170030: RNCC: 3 | RNVC: 2

4 Apr 2000

5120-12-337-9672
Socket Head Screw Key

123379672
52.3108.029.00: RNCC: 2 | RNVC: 2
52.3108.029.00: RNCC: 3 | RNVC: 2

8 May 1995

5120-12-157-7313
Schluessel

121577313
NO PRIMARY REF 12-157-7313: RNCC: 3 | RNVC: 2
1092106-9401: RNCC: 5 | RNVC: 9
4-7823-596: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-3584
S Abdrueckschraube

121333584
883-181: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5161
Open End Wrench

121235161
DIN894-80: RNCC: 2 | RNVC: 2
894-80: RNCC: 3 | RNVC: 2
4004-80: RNCC: 3 | RNVC: 2
80DIN894: RNCC: 5 | RNVC: 2
40040800: RNCC: 5 | RNVC: 2
TVA5120-2-263-025.1.1.131: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-173-4654
Spanner Wrench

121734654
V7001-013-841-9: RNCC: 3 | RNVC: 2

18 Apr 1978

5120-12-123-5701
Socket Wrench Socket

121235701
NO PRIMARY REF 12-123-5701: RNCC: 3 | RNVC: 2
05420058: RNCC: 5 | RNVC: 9
56A1 5-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-393-9066
Torque Wrench Adapter

123939066
354814: RNCC: 3 | RNVC: 2
94523-400 W2: RNCC: 5 | RNVC: 2

21 Oct 2013

5120-12-139-3115
Dorn

121393115
8205890139: RNCC: 3 | RNVC: 2
016M02000: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-3107

5120-12-181-5098
Montagevorrichtung

121815098
142520: RNCC: 3 | RNVC: 2
89415111: RNCC: 5 | RNVC: 2
142520: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-363-3294
Combination Box And Open End Wrench

123633294
0130013S: RNCC: 3 | RNVC: 2
1900009: RNCC: 5 | RNVC: 2

27 May 2004

5120-12-305-3539
Screw Thread Insert Inserter

123053539
01500225000: RNCC: 3 | RNVC: 2

25 Oct 1985

5120-12-333-7740
Hyd Ausbauwerkzeug

123337740
1840801: RNCC: 3 | RNVC: 2

4 Feb 1994

5120-12-367-6959
Socket Head Screw Key

123676959
627140-2: RNCC: 3 | RNVC: 2

27 Sep 2005

5120-12-314-2777
Montierhuelse

123142777
0852 9873: RNCC: 3 | RNVC: 2
8529873: RNCC: 5 | RNVC: 2

23 Jun 1988

5120-12-153-5065
Montagestutzen

121535065
V0M010L: RNCC: 3 | RNVC: 2
909129404: RNCC: 5 | RNVC: 2
V0M010L: RNCC: 5 | RNVC: 2
V0RM0NTAGESTUTZEN10L: RNCC: 5 | RNVC: 2
101736: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-380-3265
Seal Inserter

123803265
730589043300: RNCC: 3 | RNVC: 2

20 Oct 2009

5120-12-140-2583
Hole Sheet Metal Holder

121402583
2071S30: RNCC: 3 | RNVC: 2
2072KU32: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-363-9689
Bearing And Bushing Inserter

123639689
T671P5002122: RNCC: 3 | RNVC: 2

7 Aug 2004

5120-12-342-6602
Crimping Tool Die

123426602
210794: RNCC: 3 | RNVC: 2

12 Mar 1997

5120-12-304-0778
Lamp Extractor

123040778
300-0002: RNCC: 3 | RNVC: 2
300-0002D2714: RNCC: 5 | RNVC: 2

10 Jun 1985

5120-12-154-5464
Spade

121545464
5120-001LANG: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-322-9504
Socket Wrench Socket

123229504
DIN3124-20X12,5L: RNCC: 2 | RNVC: 2

10 Oct 1990

5120-12-307-0992
Hydrau Druckstueck

123070992
041.618.5: RNCC: 3 | RNVC: 9

7 May 1986

5120-12-179-7559
Oelfilt Schluessel

121797559
170050: RNCC: 3 | RNVC: 2
2172: RNCC: 3 | RNVC: 2
5798640002: RNCC: 5 | RNVC: 2
2172: RNCC: 5 | RNVC: 2
C 5714 131: RNCC: 5 | RNVC: 2
C 5714 131: RNCC: 5 | RNVC: 2
8410114: RNCC: 5 | RNVC: 2

25 Jul 1979

5120-12-379-6890
Socket Head Screw Key

123796890
2115-T55: RNCC: 3 | RNVC: 2
4000896012213: RNCC: 5 | RNVC: 2

24 Aug 2009

5120-12-176-2801
Face Spanner Wrench Socket

121762801
403 589 03 07/00: RNCC: 3 | RNVC: 2
403 589 03 07/00: RNCC: 5 | RNVC: 2
4035890307/00: RNCC: 5 | RNVC: 2
403 589 030700: RNCC: 5 | RNVC: 2
403589030700: RNCC: 5 | RNVC: 9

23 Nov 1978

5120-12-301-5978
Socket Head Screw Key

123015978
NO PRIMARY REF 12-301-5978: RNCC: 3 | RNVC: 2
1997MBL-5: RNCC: 5 | RNVC: 9

25 Oct 1984

5120-12-327-7297
Screw Thread Insert Tang Breakoff Tool

123277297
01580403000: RNCC: 3 | RNVC: 2
0158 0403 000: RNCC: 5 | RNVC: 2
0158-0403-000: RNCC: 5 | RNVC: 2

25 Feb 1992

5120-12-127-2825
Schluessel

121272825
WU72: RNCC: 3 | RNVC: 2
WU72: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-345-6834
Socket Wrench Screwdriver Attachment

123456834
F30371451: RNCC: 3 | RNVC: 2

15 Apr 1998

5120-12-393-5520
Socket Wrench

123935520
3323002: RNCC: 3 | RNVC: 2
03323002: RNCC: 5 | RNVC: 2

24 Sep 2013

5120-12-309-3107
Spanner Wrench

123093107
4986016: RNCC: 3 | RNVC: 2

13 Jan 1987

5120-12-166-0414
Socket Wrench Adapter

121660414
R6967: RNCC: 3 | RNVC: 2
108999: RNCC: 5 | RNVC: 2
R6967: RNCC: 5 | RNVC: 2
R6967: RNCC: 6 | RNVC: 9
1L685: RNCC: 6 | RNVC: 9

24 Jul 1976

5120-12-198-7527
Lager- Und Einsatz

121987527
5870058022: RNCC: 3 | RNVC: 2
026059: RNCC: 5 | RNVC: 2
5870058022: RNCC: 5 | RNVC: 9

23 Feb 1984

5120-12-311-0628
Spanner Wrench

123110628
395589010700: RNCC: 3 | RNVC: 2

22 Jul 1987

5120-12-390-1209
Mounting Punch

123901209
900589001500: RNCC: 3 | RNVC: 2

8 Oct 2012

5120-12-362-5508
Schluessel

123625508
119 589 00 03 00: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-12-196-4125
Socket Wrench Crowfoot Attachment

121964125
VRM604061-11-010: RNCC: 3 | RNVC: 2

5 Jul 1983

5120-12-369-2683
Magnetic Retrieving Tool

123692683
80996390009: RNCC: 3 | RNVC: 2
80.99639-0009: RNCC: 5 | RNVC: 2

13 Jun 2006

5120-12-368-2308
Mechanical Puller Attachment

123682308
731589006300: RNCC: 3 | RNVC: 2

11 Jan 2006

5120-12-310-9439
Spanner Wrench

123109439
624589003100: RNCC: 3 | RNVC: 2

10 Jul 1987

5120-12-185-9408
Socket Head Screw Key

121859408
C407A53A17: RNCC: 3 | RNVC: 2
C407-A53-A17: RNCC: 5 | RNVC: 2

11 Nov 1980

5120-12-367-1081
Bearing And Bushing Inserter

123671081
0907926: RNCC: 3 | RNVC: 2

11 Jul 2005

5120-12-381-9044
Hand Hammer

123819044
1060600S: RNCC: 3 | RNVC: 2

15 Apr 2010

5120-12-196-7850
Ratchet Wrench

121967850
RBM78S: RNCC: 3 | RNVC: 2

16 Aug 1983

5120-12-331-6647
Schluessel

123316647
002 560: RNCC: 3 | RNVC: 2

4 Jun 1993

5120-12-363-8855
Bearing And Bushing Inserter

123638855
T670P5001220: RNCC: 3 | RNVC: 2

3 Aug 2004

5120-12-175-3437
Socket Wrench

121753437
01TC30999: RNCC: 3 | RNVC: 2

11 Sep 1978

5120-12-387-9957
Cable Type Ratchet Lever Puller

123879957
Y32: RNCC: 3 | RNVC: 2
4025092078870: RNCC: 5 | RNVC: 2
Y32: RNCC: 5 | RNVC: 2

14 Feb 2012

5120-12-357-0244
Socket Wrench Screwdriver Attachment

123570244
0008312-401: RNCC: 3 | RNVC: 2
0008312-401: RNCC: 5 | RNVC: 9

25 Apr 2002

5120-12-326-5475
Drift Punch

123265475
4900506: RNCC: 3 | RNVC: 2

4 Oct 1991

5120-12-197-1490
Schluessel

121971490
01TC32312: RNCC: 3 | RNVC: 2

26 Sep 1983

5120-12-135-2056
Screwdriver Bit

121352056
851H5-5-2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-334-8484
Montierhuelse

123348484
7271182: RNCC: 3 | RNVC: 2

28 Jun 1994

5120-12-365-4819
Piston Inserter

123654819
F6783662: RNCC: 3 | RNVC: 2

7 Jan 2005

5120-12-321-4818
Socket Wrench Handle

123214818
3790.10.36.00: RNCC: 3 | RNVC: 2
10 0021 756: RNCC: 5 | RNVC: 2

23 May 1990

5120-12-021-2680

5120-12-302-2635
Pliers

123022635
0005810838: RNCC: 3 | RNVC: 2

13 Dec 1984

5120-12-358-7169
Mechanical Puller

123587169
80996010135: RNCC: 3 | RNVC: 2
80.99601.0135: RNCC: 5 | RNVC: 2

7 Nov 2002

5120-12-358-7781
Bearing And Bushing Inserter

123587781
80996330005: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-312-7827
Spanner Wrench

123127827
1X56099057: RNCC: 3 | RNVC: 2
1X56 099 057: RNCC: 5 | RNVC: 2
V99057: RNCC: 5 | RNVC: 2

4 Feb 1988

5120-12-171-8172
Flat Tip Screwdriver Set

121718172
52736010: RNCC: 3 | RNVC: 9

18 Nov 1977

5120-12-174-1244
Spannvorrichtung

121741244
30AM004: RNCC: 3 | RNVC: 2

6 Jun 1978

5120-12-302-4261

5120-12-133-6764
Torque Wrench

121336764
NO PRIMARY REF 12-133-6764: RNCC: 3 | RNVC: 2
22385: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-1524
Bearing And Bushing Inserter

123121524
142610: RNCC: 3 | RNVC: 2
80.99606-0278: RNCC: 5 | RNVC: 2
80996060278: RNCC: 5 | RNVC: 2
E7324-00-00: RNCC: 5 | RNVC: 2
3-104-KHD: RNCC: 5 | RNVC: 2

27 Nov 1987

5120-12-190-9039
Socket Wrench

121909039
0003-4195-030: RNCC: 3 | RNVC: 2
0003-4195-030: RNCC: 5 | RNVC: 9

21 Dec 1981

5120-12-127-3968
Screwdriver Bit

121273968
NO PRIMARY REF 12-127-3968: RNCC: 3 | RNVC: 2
109181: RNCC: 5 | RNVC: 9
7090M4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-8278
Socket Wrench Screwdriver Attachment

123688278
3245TXL 50X140: RNCC: 3 | RNVC: 2
00.50.36.89: RNCC: 5 | RNVC: 2

26 Apr 2006

5120-12-319-0673
Elektron Auszieher

123190673
T2375 6: RNCC: 3 | RNVC: 2
GX-6: RNCC: 3 | RNVC: 2

4 Sep 1989

5120-12-317-1767
Socket Head Screw Key

123171767
1402435/3: RNCC: 3 | RNVC: 9

15 Mar 1989

5120-12-358-7509
Socket Wrench Set

123587509
14899.3: RNCC: 3 | RNVC: 2

11 Nov 2002

5120-12-161-7504
Kabelklem Abzieher

121617504
69357-5: RNCC: 3 | RNVC: 2

21 Jun 1980

5120-12-179-9715
Buchse

121799715
160010-2: RNCC: 3 | RNVC: 2
80.99635-0005: RNCC: 5 | RNVC: 2
80996350005: RNCC: 5 | RNVC: 2

14 Aug 1979

5120-12-195-3017
Spanner Wrench

121953017
61390019004: RNCC: 3 | RNVC: 2
6.139-0019-0(4): RNCC: 5 | RNVC: 9

7 Feb 1983

5120-12-155-9472
Socket Head Screw Key

121559472
M290-120: RNCC: 3 | RNVC: 2
M290-120: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-370-2202
Plier Wrench

123702202
4004250: RNCC: 3 | RNVC: 2
6563-250: RNCC: 3 | RNVC: 2
00.13.48.87: RNCC: 5 | RNVC: 2
65632250: RNCC: 5 | RNVC: 2

5 Oct 2006

5120-12-190-9201
Schluessel

121909201
0003-537-000: RNCC: 3 | RNVC: 2
000-3341-000: RNCC: 5 | RNVC: 9
0003-3341-000: RNCC: 5 | RNVC: 9
000-3341-000: RNCC: 5 | RNVC: 9
0003-3341-000: RNCC: 5 | RNVC: 9

22 Dec 1981

5120-12-148-2755
Open End Wrench

121482755
C22407-A25-C1: RNCC: 3 | RNVC: 2
40 141-100: RNCC: 3 | RNVC: 2
C22407A25C1: RNCC: 5 | RNVC: 2
40141-100: RNCC: 5 | RNVC: 2
C22407A25C1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-306-0089
Drive Pin Punch

123060089
3659D2,4: RNCC: 3 | RNVC: 2
3659D-2.4: RNCC: 5 | RNVC: 2

20 Jan 1986

5120-12-374-3593
Socket Wrench Socket

123743593
02040012-TCS: RNCC: 3 | RNVC: 2

11 Feb 2008

5120-12-321-0773
Mechanical Puller Forcing Screw

123210773
99366686: RNCC: 3 | RNVC: 2

26 Mar 1990

5120-12-187-1933

5120-12-158-6240
Stift

121586240
96072016: RNCC: 3 | RNVC: 2
92792302: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-383-1993
Tube Fitting Wrenching Socket

123831993
4222 320 001: RNCC: 3 | RNVC: 2

23 Sep 2010

5120-12-140-9180
Dorn

121409180
4625: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-360-3176
Socket Wrench

123603176
9015810201: RNCC: 3 | RNVC: 2

8 May 2003

5120-12-191-5430
Socket Wrench

121915430
31.390.088: RNCC: 3 | RNVC: 2
31390088: RNCC: 5 | RNVC: 2

9 Feb 1982

5120-12-021-2653

5120-12-136-0815

5120-12-384-9078
Saddler's Pegging Awl Blade

123849078
50.000.013: RNCC: 3 | RNVC: 2

8 Apr 2011

5120-12-023-1403

5120-12-146-5129
Socket Wrench

121465129
1X46096824: RNCC: 3 | RNVC: 2
V96824: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-380-2478
Hand Roller

123802478
125.485: RNCC: 3 | RNVC: 2
4128002: RNCC: 5 | RNVC: 2

9 Oct 2009

5120-12-368-6875
Socket Wrench Screwdriver Attachment

123686875
3244-TX 45: RNCC: 3 | RNVC: 2
00.47.69.16: RNCC: 5 | RNVC: 2

6 Apr 2006

5120-12-368-1981
Socket Wrench Socket

123681981
01530022-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-373-4565
Socket Head Screw Key

123734565
0613 133 03: RNCC: 3 | RNVC: 2

6 Nov 2007

5120-12-363-9285
Bearing And Bushing Inserter And Remover

123639285
T670P5001293: RNCC: 3 | RNVC: 2

5 Aug 2004

5120-12-168-3591
Okular Zange

121683591
12709-22000W8: RNCC: 3 | RNVC: 2
12709-22000W8: RNCC: 5 | RNVC: 2
12709-22000W8: RNCC: 5 | RNVC: 9

10 Mar 1977

5120-12-365-3299
Bearing And Bushing Inserter

123653299
5580332: RNCC: 3 | RNVC: 2
(241)A42495580332: RNCC: 8 | RNVC: 2
5580332: RNCC: 8 | RNVC: 2

21 Dec 2004

5120-12-142-1649
Haken

121421649
2876001000: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-182-6725
Radnabe Abzieher

121826725
3906-28000-000: RNCC: 3 | RNVC: 9
WU73: RNCC: 5 | RNVC: 9

20 Feb 1980

5120-12-389-4264
Swivel Knob Jeweler's Screwdriver

123894264
05118024001: RNCC: 3 | RNVC: 2
2050-PH1X80: RNCC: 5 | RNVC: 2

4 Jul 2012

5120-12-314-9578
Spanner Wrench

123149578
P-0-720: RNCC: 3 | RNVC: 2
P-0-720: RNCC: 5 | RNVC: 9

1 Sep 1988

5120-12-384-8445
Drift Punch

123848445
W4: RNCC: 3 | RNVC: 2

4 Apr 2011

5120-12-389-5306
Flat Tip Screwdriver

123895306
46211035-TCS: RNCC: 3 | RNVC: 2

18 Jul 2012

5120-12-126-5514
Schluessel

121265514
4015890003: RNCC: 3 | RNVC: 2
4015890003: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-163-6640
Spanner Wrench

121636640
26-21C1475G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-339-3227
Mechanical Puller

123393227
E11.59661-0447: RNCC: 3 | RNVC: 2
596-090: RNCC: 5 | RNVC: 2
E11.59661-0447: RNCC: 5 | RNVC: 9
596-090: RNCC: 5 | RNVC: 9

9 Nov 1995

5120-12-133-3618
Open End Wrench

121333618
895-16X17: RNCC: 3 | RNVC: 2
C 5702 337 EC: RNCC: 5 | RNVC: 2
C 5702 337 EC: RNCC: 5 | RNVC: 2
105814: RNCC: 5 | RNVC: 9
1953M 16X17: RNCC: 5 | RNVC: 9
1953M16X17: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5061
Open End Wrench

121235061
C20407-Z9-A5: RNCC: 3 | RNVC: 2
C20407A9A5: RNCC: 5 | RNVC: 2
C20407Z9A5: RNCC: 5 | RNVC: 2
TFS70-04699: RNCC: 5 | RNVC: 2
TFS70-04699: RNCC: 5 | RNVC: 9
C20407A9A5: RNCC: 5 | RNVC: 9
TFS70-04699: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-2537
Rohrbieger Dorn

123052537
5-3/80-035-000-21429: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-315-2905
We Montierwerkzeug

123152905
553589016300: RNCC: 3 | RNVC: 2
5535890163-00: RNCC: 5 | RNVC: 2
5535890163/00: RNCC: 5 | RNVC: 2
5535890163/00: RNCC: 5 | RNVC: 2
5535890163/00: RNCC: 5 | RNVC: 2

11 Oct 1988

5120-12-359-6694
Trim Biegewerkzeug

123596694
T621P4001101: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-025-0593

5120-12-370-4000
Ratchet Wrench

123704000
299: RNCC: 3 | RNVC: 2

2 Nov 2006

5120-12-363-9551
Bearing And Bushing Inserter

123639551
T671P5002113: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-12-375-0623
Aligning Punch

123750623
182307101: RNCC: 3 | RNVC: 2

17 Apr 2008

5120-12-355-9523
Mechanical Puller Forcing Screw

123559523
01500614020: RNCC: 3 | RNVC: 2

9 Jan 2002

5120-12-024-5189

5120-12-127-4109
Ausziehvorrichtung

121274109
66035411900008: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-317-6019
Pin Inserter

123176019
530011: RNCC: 2 | RNVC: 9

20 Apr 1989

5120-12-177-2992
Montagewerkzeug

121772992
321589001500: RNCC: 3 | RNVC: 2

24 Jan 1979

5120-12-381-9075
Hand Pile Extractor

123819075
7102-0102: RNCC: 3 | RNVC: 2

16 Apr 2010

5120-12-368-1022
Socket Head Screw Key

123681022
43260002-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-368-8268
Socket Wrench Screwdriver Attachment

123688268
3245TXL 25: RNCC: 3 | RNVC: 2
00.50.30.83: RNCC: 5 | RNVC: 2

26 Apr 2006

5120-12-177-1683
Grommet Inserting Punch And Die

121771683
8884: RNCC: 3 | RNVC: 9

17 Jan 1979

5120-12-370-1514
Mechanical Finger

123701514
919359: RNCC: 3 | RNVC: 2

26 Sep 2006

5120-12-123-5325

5120-12-186-6027
Werkzeug Halter

121866027
4900059-211461-000-0: RNCC: 3 | RNVC: 2
4900059-211461.000.0: RNCC: 3 | RNVC: 2
211461-000-0: RNCC: 5 | RNVC: 2

21 Jan 1981

5120-12-126-1786
Fid

121261786
TL5120-0027-A: RNCC: 2 | RNVC: 2
NM006-1: RNCC: 5 | RNVC: 9
5120-0027ITEM A: RNCC: 5 | RNVC: 9
5120-0027ITEMA: RNCC: 5 | RNVC: 9
5120-027ITEM A: RNCC: 5 | RNVC: 9
5120-027ITEMA: RNCC: 5 | RNVC: 9
TL5120-0027ITEM A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-300-3075
Socket Wrench Screwdriver Attachment

123003075
IN19L/6-90: RNCC: 3 | RNVC: 2
5120123003075: RNCC: 5 | RNVC: 2
615730: RNCC: 5 | RNVC: 2
5073336: RNCC: 5 | RNVC: 2
698-422-0050: RNCC: 5 | RNVC: 2
6930780: RNCC: 5 | RNVC: 2

24 Jul 1984

5120-12-143-9645
Socket Wrench

121439645
450-00-26-1-24: RNCC: 3 | RNVC: 2
2548: RNCC: 5 | RNVC: 2
26-01-58: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-357-7167
Pr Pressbackensatz

123577167
80C-A12: RNCC: 3 | RNVC: 2
80CA12: RNCC: 5 | RNVC: 2

16 Jul 2002

5120-12-319-8925
Combination Box And Open End Wrench Set

123198925
250A-07-0700: RNCC: 3 | RNVC: 2
250A-07-0700: RNCC: 5 | RNVC: 9

14 Nov 1989

5120-12-126-2981
Justier Stift

121262981
V23063-Z1043: RNCC: 3 | RNVC: 2
C20407A0004C001: RNCC: 5 | RNVC: 2
C20407A4C1: RNCC: 5 | RNVC: 2
TFS70-01815: RNCC: 5 | RNVC: 2
TWZ4E1: RNCC: 5 | RNVC: 2
V23063Z1043: RNCC: 5 | RNVC: 2
TWZ4E1: RNCC: 5 | RNVC: 9
C20407A0004C001: RNCC: 5 | RNVC: 9
C20407A4C1: RNCC: 5 | RNVC: 9
TFS70-01815: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-0045
Mechanical Puller Attachment

123300045
0852 3055.001: RNCC: 3 | RNVC: 2
8523055.001: RNCC: 5 | RNVC: 2

21 Oct 1992

5120-12-344-1831
Schraubst Aufnahme

123441831
HEUERLIFT160MM: RNCC: 3 | RNVC: 2
HEUERLIFT160MM: RNCC: 5 | RNVC: 9

23 Sep 1997

5120-12-375-8602
Plier Type Eyelet Punch

123758602
570: RNCC: 3 | RNVC: 2

14 Jul 2008

5120-12-348-6591
Socket Head Screw Key

123486591
F000050: RNCC: 3 | RNVC: 2

30 Jul 1999

5120-12-392-7531
Box Wrench

123927531
SEWZG027: RNCC: 3 | RNVC: 2

4 Jul 2013

5120-12-192-1298
Piston Ring Expander

121921298
BM14673F: RNCC: 3 | RNVC: 2

24 Mar 1982

5120-12-364-1726
Driftpin

123641726
F30379881: RNCC: 3 | RNVC: 2

27 Aug 2004

5120-12-092-2298

5120-12-141-1319
Pipe Vise And Stand

121411319
12202: RNCC: 3 | RNVC: 2
12202: RNCC: 5 | RNVC: 9
PI0NIERV2: RNCC: 5 | RNVC: 9
8342: RNCC: 5 | RNVC: 9
4964: RNCC: 5 | RNVC: 9
634B103-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-1994
Box Wrench Set

121741994
110 S8MK: RNCC: 3 | RNVC: 2
2M8T: RNCC: 3 | RNVC: 2
2-8: RNCC: 3 | RNVC: 2
100139: RNCC: 5 | RNVC: 2
100138: RNCC: 5 | RNVC: 9
2M8: RNCC: 5 | RNVC: 9

12 Jun 1978

5120-12-312-9614
Socket Wrench

123129614
65.7132.050.02: RNCC: 3 | RNVC: 2

22 Feb 1988

5120-12-133-4570

5120-12-319-3635
Mechan Druckstueck

123193635
99346219: RNCC: 3 | RNVC: 2

26 Sep 1989

5120-12-355-3226
Spanner Wrench

123553226
5553727: RNCC: 3 | RNVC: 2

31 Oct 2001

5120-12-373-1089
Socket Wrench

123731089
137427: RNCC: 3 | RNVC: 2
01.89.68.53: RNCC: 5 | RNVC: 2

27 Sep 2007

5120-12-347-4329
Woven Cable Grip

123474329
02.278.080.555: RNCC: 3 | RNVC: 2

10 Dec 1998

5120-12-307-5755
Montage- Hebel

123075755
CF 491 616 AE: RNCC: 2 | RNVC: 2
CF 491 616 AE: RNCC: 3 | RNVC: 2
CF 491 616 AE: RNCC: 3 | RNVC: 2

3 Jul 1986

5120-12-192-9990
Face Spanner Wrench Socket

121929990
617589000700: RNCC: 3 | RNVC: 2
617 589 00 07 00: RNCC: 3 | RNVC: 2

11 Jun 1982

5120-12-094-0319

5120-12-327-1439
Hand Hammer

123271439
2001: RNCC: 3 | RNVC: 2
20-1200GR: RNCC: 5 | RNVC: 2
20-40 MIT STIEL: RNCC: 5 | RNVC: 2

5 Dec 1991

5120-12-120-6183
Flat Tip Screwdriver

121206183
NO PRIMARY REF 12-120-6183: RNCC: 3 | RNVC: 2
131525: RNCC: 5 | RNVC: 9
8007-7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-388-9321
Mec Pressure Piece

123889321
II32202: RNCC: 3 | RNVC: 2
80.99606-0453: RNCC: 5 | RNVC: 2
80996060453: RNCC: 5 | RNVC: 2

8 May 2012

5120-12-173-6616
Mechanical Puller

121736616
379-948: RNCC: 3 | RNVC: 2
1001-8100-0066: RNCC: 5 | RNVC: 2

28 Apr 1978

5120-12-178-3293
Open End Wrench

121783293
NO PRIMARY REF 12-178-3293: RNCC: 3 | RNVC: 2
609765: RNCC: 5 | RNVC: 9
8M8BA: RNCC: 5 | RNVC: 9
12E8BA: RNCC: 5 | RNVC: 9
40769191: RNCC: 5 | RNVC: 9

12 Apr 1979

5120-12-070-0185

5120-12-386-6663
Open End Wrench

123866663
300.068.554: RNCC: 3 | RNVC: 2

21 Sep 2011

5120-12-342-2117
Ge Montierwerkzeug

123422117
1X56136311: RNCC: 3 | RNVC: 2

7 Jan 1997

5120-12-384-0124
Engine Valve Seat Insert Replacing Tool

123840124
F30450751: RNCC: 3 | RNVC: 2

12 Jan 2011

5120-12-359-6142
Mechanical Puller Adapter

123596142
T631P3003101: RNCC: 3 | RNVC: 2

21 Feb 2003

5120-12-315-9383
Mechanical Puller Attachment

123159383
63-441: RNCC: 3 | RNVC: 2
000-941-91-35: RNCC: 5 | RNVC: 2
0009419135: RNCC: 5 | RNVC: 2

8 Dec 1988

5120-12-362-4581
Cross Tip Screwdriver

123624581
54.0084.960.29: RNCC: 3 | RNVC: 2
8078-01: RNCC: 5 | RNVC: 2

26 Feb 2004

5120-12-146-9903
Open End Wrench

121469903
NM283-14: RNCC: 3 | RNVC: 2
NM283-14: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-304-4147
Bearing And Bushing Inserter

123044147
009-088.220-000W2: RNCC: 3 | RNVC: 2

16 Jul 1985

5120-12-339-8860
Socket Wrench Socket

123398860
NO PRIMARY REF 12-339-8860: RNCC: 3 | RNVC: 2
1000A-1.1/2: RNCC: 5 | RNVC: 9
2389120030: RNCC: 5 | RNVC: 9

29 Jan 1996

5120-12-173-1164
Slip Joint Pliers

121731164
8272-200: RNCC: 3 | RNVC: 2
1410200: RNCC: 3 | RNVC: 9
673889: RNCC: 3 | RNVC: 9
573C315: RNCC: 5 | RNVC: 2
113: RNCC: 5 | RNVC: 9
8272-8: RNCC: 5 | RNVC: 9

20 Mar 1978

5120-12-344-0397
Montierwer Einsatz

123440397
03-991-01300: RNCC: 3 | RNVC: 2

2 Sep 1997

5120-12-168-0789
Spanner Wrench

121680789
2360-264309.00.0: RNCC: 2 | RNVC: 2
2360-264309.00.0: RNCC: 3 | RNVC: 2
90600610000001: RNCC: 3 | RNVC: 2
2360-264309-00-0: RNCC: 5 | RNVC: 2
906061: RNCC: 5 | RNVC: 2
2360-264309-00-0: RNCC: 5 | RNVC: 2
2360-264309.00.0: RNCC: 5 | RNVC: 2
2360-264309-00-0: RNCC: 5 | RNVC: 9
2360-264309.00.0: RNCC: 5 | RNVC: 9

14 Feb 1977

5120-12-392-7529
Box Wrench

123927529
SEWZG026: RNCC: 3 | RNVC: 2

4 Jul 2013

5120-12-700-7937
Pinch Bar

127007937
4209397: RNCC: 2 | RNVC: 2

26 May 1993

5120-12-010-0652

5120-12-311-0002
Spanner Wrench

123110002
272.315 109: RNCC: 2 | RNVC: 2
272.315 109: RNCC: 3 | RNVC: 2

16 Jul 1987

5120-12-135-8333
Einstell- Dorn

121358333
VW219: RNCC: 3 | RNVC: 2
VW219: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-044-5794

5120-12-333-5657
Open End Wrench

123335657
1839401: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-364-3124
Socket Wrench Socket

123643124
01030005-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-364-3475
Combination Box And Open End Wrench

123643475
40081717-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-316-1771
Socket Wrench Handle Ratchet Head

123161771
1116: RNCC: 3 | RNVC: 2
2635900002: RNCC: 5 | RNVC: 2

29 Dec 1988

5120-12-312-9352
Spanner Wrench

123129352
KDEP 2961: RNCC: 3 | RNVC: 2

19 Feb 1988

5120-12-367-1076
Montierwerk Huelse

123671076
0907989: RNCC: 3 | RNVC: 2

11 Jul 2005

5120-12-172-6377
Spannbacke

121726377
1X56104910: RNCC: 3 | RNVC: 2
V104915: RNCC: 5 | RNVC: 2
0535431: RNCC: 5 | RNVC: 2
000589596300: RNCC: 5 | RNVC: 2
535431: RNCC: 5 | RNVC: 9

31 Jan 1978

5120-12-091-4757

5120-12-129-8807
Abziehglocke

121298807
1680506002: RNCC: 3 | RNVC: 2
EF3042: RNCC: 5 | RNVC: 2
EF3042: RNCC: 5 | RNVC: 9
KDAW9995-0-3: RNCC: 5 | RNVC: 9
1680506002: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-4217
Electronic Equipment Alignment Tool

121744217
1900TRB: RNCC: 3 | RNVC: 2

29 Jun 1978

5120-12-021-2522

5120-12-021-2465

5120-12-388-7699
Handling Tool Arm

123887699
030.271: RNCC: 3 | RNVC: 2
030.271: RNCC: 5 | RNVC: 2

20 Apr 2012

5120-12-369-3627
Sealant Dispenser

123693627
1551601: RNCC: 3 | RNVC: 2

26 Jun 2006

5120-12-366-2112
Schluesseleinsatz

123662112
0422 0501: RNCC: 3 | RNVC: 2

22 Mar 2005

5120-12-198-6580
Aufweitwer Einsatz

121986580
234 209: RNCC: 3 | RNVC: 2

17 Feb 1984

5120-12-149-5304
Spanner Wrench

121495304
7746J: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-189-5932
Spanner Wrench

121895932
4900168-600: RNCC: 3 | RNVC: 2

7 Oct 1981

5120-12-126-1816
Hand Hammer

121261816
206T3-50: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-368-0637
Hand Hammer

123680637
532F-3/4: RNCC: 3 | RNVC: 2
8817590: RNCC: 5 | RNVC: 2
TA527: RNCC: 5 | RNVC: 2

30 Nov 2005

5120-12-094-0073

5120-12-123-5342
Combination Box And Open End Wrench

121235342
DIN3113-A46: RNCC: 2 | RNVC: 2
13-46: RNCC: 3 | RNVC: 2
400-46: RNCC: 3 | RNVC: 2
61350-46: RNCC: 5 | RNVC: 2
613500-46: RNCC: 5 | RNVC: 2
40084646: RNCC: 5 | RNVC: 2
00400046082: RNCC: 5 | RNVC: 2
04000460: RNCC: 5 | RNVC: 9
400MM46: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-121-2840
Torque Wrench

121212840
NO PRIMARY REF 12-121-2840: RNCC: 3 | RNVC: 2
0005892421: RNCC: 5 | RNVC: 2
50030012: RNCC: 5 | RNVC: 9
73-12: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-315-4872
Combination Box And Open End Wrench

123154872
603-24: RNCC: 3 | RNVC: 2
1505110023: RNCC: 5 | RNVC: 2

29 Oct 1988

5120-12-171-5734
Aufsatz

121715734
VG95211-ML-121715734: RNCC: 2 | RNVC: 2
1X56 122 389: RNCC: 3 | RNVC: 2
1X56122389: RNCC: 5 | RNVC: 9

26 Oct 1977

5120-12-335-6875
Swivel Knob Jeweler's Screwdriver

123356875
260-1,2X40: RNCC: 3 | RNVC: 2

13 Sep 1994

5120-12-127-5314
Torque Wrench

121275314
DSK 0/2: RNCC: 3 | RNVC: 2
DSK02: RNCC: 3 | RNVC: 2
414-0179-01: RNCC: 5 | RNVC: 2
DSK3-2: RNCC: 5 | RNVC: 2
5120-40352: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-332-8174
Feder Spannersatz

123328174
VW 3140/A: RNCC: 3 | RNVC: 2
2586N/3: RNCC: 3 | RNVC: 2
3140A: RNCC: 3 | RNVC: 2
3140A/1+2: RNCC: 5 | RNVC: 2

22 Sep 1993

5120-12-384-0820
Socket Head Screw Key Set

123840820
729AF: RNCC: 3 | RNVC: 2

19 Jan 2011

5120-12-133-4523
Piston Ring Compressor

121334523
018M00200: RNCC: 3 | RNVC: 2
018M00100: RNCC: 5 | RNVC: 2
018M00600: RNCC: 5 | RNVC: 2
8395890037: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-133-3212
Crimping Tool Die

121333212
05122: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-368-8748
Socket Wrench Socket

123688748
770-LTXE14: RNCC: 3 | RNVC: 2
00.50.44.00: RNCC: 5 | RNVC: 2

3 May 2006

5120-12-338-0658
Hand Scissors Jack

123380658
155011031A: RNCC: 3 | RNVC: 2

17 May 1995

5120-12-357-7349
Montierdorn

123577349
F30274278: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-12-168-6381

5120-12-386-1584
Hydraulic Adapter

123861584
80996290046: RNCC: 3 | RNVC: 2
80996290046: RNCC: 5 | RNVC: 2
80.99629-0046: RNCC: 5 | RNVC: 2

12 Aug 2011

5120-12-190-3672
Box Wrench

121903672
MKV1150/4501.01.02.12: RNCC: 3 | RNVC: 2

24 Nov 1981

5120-12-300-1835
Spanner Wrench

123001835
IR915015: RNCC: 3 | RNVC: 2
4900229-37: RNCC: 5 | RNVC: 2

12 Jul 1984

5120-12-170-3107
Hinged Posthole Digger

121703107
06460021: RNCC: 3 | RNVC: 9
FE460-21: RNCC: 3 | RNVC: 9

7 Jul 1977

5120-12-316-7431
Spanner Wrench

123167431
AF145-1565: RNCC: 3 | RNVC: 2

8 Feb 1989

5120-12-140-9565
Einsteck Schluessel

121409565
RP863-73: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-135-0203
Socket Wrench

121350203
343-6: RNCC: 3 | RNVC: 2
1945NKBM6: RNCC: 5 | RNVC: 9
343-6SW: RNCC: 5 | RNVC: 9
105388: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-185-1916
Haken

121851916
83.09144.0037: RNCC: 3 | RNVC: 2
3630115: RNCC: 3 | RNVC: 2
365 0002: RNCC: 3 | RNVC: 2
365 0002-000-00.2: RNCC: 3 | RNVC: 2
3650002: RNCC: 5 | RNVC: 9

18 Sep 1980

5120-12-195-9215
Socket Wrench

121959215
00501691931: RNCC: 3 | RNVC: 2
05016919: RNCC: 5 | RNVC: 2
501 W 5/8X3/4IN: RNCC: 5 | RNVC: 2

3 May 1983

5120-12-191-0676
Oese

121910676
365 0009-000-00.4: RNCC: 3 | RNVC: 2
365 0009: RNCC: 3 | RNVC: 2
3650009: RNCC: 5 | RNVC: 9

11 Jan 1982

5120-12-370-6243
Trowel

123706243
748 014 00: RNCC: 3 | RNVC: 2
02.33.58.78: RNCC: 5 | RNVC: 2

1 Dec 2006

5120-12-368-9267
Socket Wrench Socket

123689267
771-S42: RNCC: 3 | RNVC: 2
00.51.85.44: RNCC: 5 | RNVC: 2

8 May 2006

5120-12-319-4363
Seal Inserter

123194363
99366654: RNCC: 3 | RNVC: 2

2 Oct 1989

5120-12-384-3050
Piston Inserter

123843050
F6557120: RNCC: 3 | RNVC: 2

10 Feb 2011

5120-12-127-2817
Ritzel Gegenhalter

121272817
WU20A: RNCC: 3 | RNVC: 2
WU20A: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-023-1099

5120-12-090-1661

5120-12-370-5954
Slip Joint Pliers

123705954
8901250: RNCC: 3 | RNVC: 2
00.12.99.38: RNCC: 5 | RNVC: 2
4003773013334: RNCC: 5 | RNVC: 2

27 Nov 2006

5120-12-126-2609
Quick Adjusting Screw Clamp

121262609
D30-30: RNCC: 3 | RNVC: 2
609290: RNCC: 3 | RNVC: 2
TG40T30: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-337-1484
Montierdorn

123371484
0852 4469: RNCC: 3 | RNVC: 2
8524469: RNCC: 5 | RNVC: 2

25 Jan 1995

5120-12-357-6287
Mechanical Puller

123576287
F6375388: RNCC: 3 | RNVC: 2

8 Jul 2002

5120-12-313-6180
Spanner Wrench

123136180
80996030134: RNCC: 3 | RNVC: 2
80.99603.0134: RNCC: 5 | RNVC: 2

20 Apr 1988

5120-12-156-7211
Socket Head Screw Key

121567211
109120301: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-333-6028
Mechanical Puller

123336028
03961W1: RNCC: 3 | RNVC: 2

12 Jan 1994

5120-12-335-0535
Seal Inserter

123350535
F30276069: RNCC: 3 | RNVC: 2

18 Jul 1994

5120-12-367-1090
Auswechs Klemmteil

123671090
14589171: RNCC: 3 | RNVC: 2

11 Jul 2005

5120-12-384-0379
Mounting Sleeve

123840379
F6780579: RNCC: 3 | RNVC: 2

13 Jan 2011

5120-12-328-3641
Socket Wrench Screwdriver Attachment

123283641
F30279439: RNCC: 3 | RNVC: 2

9 May 1992

5120-12-381-5138
Slip Joint Pliers

123815138
P550503: RNCC: 3 | RNVC: 2

25 Feb 2010

5120-12-127-2759
Achs Hakenschraube

121272759
83.09143-0030: RNCC: 3 | RNVC: 2
83091430030: RNCC: 3 | RNVC: 2
WL12A: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-161-6799
Pliers

121616799
RP24.20: RNCC: 3 | RNVC: 2
RP24-20: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-168-7655
Stiftauszi Einsatz

121687655
4900072-013000: RNCC: 2 | RNVC: 2
100332-10000W6: RNCC: 3 | RNVC: 2
4900072-013000: RNCC: 5 | RNVC: 2
100332-10000W6: RNCC: 5 | RNVC: 9
4900072-013000: RNCC: 5 | RNVC: 9

6 Apr 1977

5120-12-185-0084
Craftsman's Tweezers

121850084
9379-105-R: RNCC: 3 | RNVC: 2
T2316: RNCC: 3 | RNVC: 2
5-132: RNCC: 3 | RNVC: 2
5465R: RNCC: 3 | RNVC: 2
7314151085223: RNCC: 5 | RNVC: 2
2316: RNCC: 5 | RNVC: 9
108516: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-12-387-5885
Socket Wrench

123875885
260J73104: RNCC: 3 | RNVC: 2
260/J 731 04: RNCC: 5 | RNVC: 2
004000: RNCC: 5 | RNVC: 2

11 Jan 2012

5120-12-152-5603
Torque Wrench Adapter

121525603
20-2-14: RNCC: 3 | RNVC: 2
20-14-2: RNCC: 5 | RNVC: 2
169125107: RNCC: 5 | RNVC: 2
7101-86-31-02: RNCC: 5 | RNVC: 9
7101-86-31.02: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-121-1039

5120-12-360-3228
Hand Screw Starter

123603228
05005115001: RNCC: 3 | RNVC: 2
186PZ2: RNCC: 5 | RNVC: 2
005115: RNCC: 5 | RNVC: 9

8 May 2003

5120-12-364-3143
Socket Wrench Socket

123643143
01240010-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-338-4371
Spanner Wrench

123384371
387589000700: RNCC: 3 | RNVC: 2
387 589 00 07 00: RNCC: 5 | RNVC: 2

10 Jul 1995

5120-12-311-6480
Aufstec Schluessel

5120-12-023-1409

5120-12-092-3878

5120-12-358-0778
Hand Sheet Metal Pipe Crimping Tool

123580778
VG95236T12A0001: RNCC: 2 | RNVC: 2
11210: RNCC: 3 | RNVC: 2
11210: RNCC: 5 | RNVC: 2

10 Sep 2002

5120-12-321-3168
Spanner Wrench

123213168
4729: RNCC: 3 | RNVC: 2

4 May 1990

5120-12-342-6593
Mechanical Puller

123426593
2955: RNCC: 3 | RNVC: 2

12 Mar 1997

5120-12-353-8488
Socket Wrench

123538488
001589530900: RNCC: 3 | RNVC: 2

15 May 2001

5120-12-332-0104
Spanner Wrench

123320104
272.395 047 EZ: RNCC: 3 | RNVC: 2

15 Jul 1993

5120-12-368-8646
Socket Wrench Socket

123688646
770-LTXE11: RNCC: 3 | RNVC: 2
00.50.42.95: RNCC: 5 | RNVC: 2

2 May 2006

5120-12-349-4028
Open End Box Wrench

123494028
0986611452: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-361-1998
Torque Wrench Adapter

123611998
CBD32094P01: RNCC: 3 | RNVC: 2

3 Sep 2003

5120-12-392-2513
Drive Pin Punch

123922513
108-175X6: RNCC: 3 | RNVC: 2
70070012: RNCC: 5 | RNVC: 2

21 May 2013

5120-12-343-3349
Electronic Equipment Alignment Tool

123433349
06L7625: RNCC: 3 | RNVC: 2

9 Jun 1997

5120-12-125-2646

5120-12-194-8600
Face Spanner Wrench Socket

121948600
E4-2027160: RNCC: 3 | RNVC: 2
5120B 197: RNCC: 5 | RNVC: 2
E4-2027160: RNCC: 5 | RNVC: 9

14 Dec 1982

5120-12-307-0802
Montage- Hebel

123070802
FM7006: RNCC: 3 | RNVC: 2

6 May 1986

5120-12-151-6553
Montagevorrichtung

121516553
1004-0700V1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-393-9128
Socket Wrench

123939128
05013405001: RNCC: 3 | RNVC: 2
495-10X230: RNCC: 5 | RNVC: 2

21 Oct 2013

5120-12-199-7135
Socket Wrench

121997135
IR915209: RNCC: 3 | RNVC: 2
4900237-11: RNCC: 5 | RNVC: 2
IR915209: RNCC: 5 | RNVC: 9

24 May 1984

5120-12-375-2903
Socket Wrench Socket

123752903
9246-09400: RNCC: 3 | RNVC: 9
09400: RNCC: 5 | RNVC: 2
9246 01: RNCC: 5 | RNVC: 2
9246-09400: RNCC: 5 | RNVC: 9

15 May 2008

5120-12-307-1620
Screwdriver Bit

123071620
TL5120-0132-G1: RNCC: 2 | RNVC: 2
3245TX-20: RNCC: 3 | RNVC: 2
992-T20: RNCC: 3 | RNVC: 2
54TX-T20: RNCC: 3 | RNVC: 2
ITX19-T20: RNCC: 3 | RNVC: 2
00.50.20.73: RNCC: 5 | RNVC: 2
11710: RNCC: 5 | RNVC: 2
03100020: RNCC: 5 | RNVC: 2
2487130001: RNCC: 5 | RNVC: 9
INXT19-20: RNCC: 5 | RNVC: 9

15 May 1986

5120-12-135-2824
Stud Inserter And Remover

121352824
NO PRIMARY REF 12-135-2824: RNCC: 3 | RNVC: 2
109614: RNCC: 5 | RNVC: 9
7492: RNCC: 5 | RNVC: 9
71020000: RNCC: 5 | RNVC: 9
902: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-9242
Schluessel

121479242
890-0825-05: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-183-1604
Torque Wrench

121831604
NO PRIMARY REF 12-183-1604: RNCC: 3 | RNVC: 2
750RAT1: RNCC: 5 | RNVC: 9

25 Mar 1980

5120-12-316-5191
Spanner Wrench

123165191
DIN1810-B205-220: RNCC: 2 | RNVC: 2
40Z205-220: RNCC: 3 | RNVC: 2
00737: RNCC: 5 | RNVC: 2
0737: RNCC: 5 | RNVC: 2
633828: RNCC: 5 | RNVC: 2

23 Jan 1989

5120-12-349-4017
Socket Wrench

123494017
0986611453: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-12-364-4730
Torque Wrench Adapter

123644730
02181010-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-181-6881
Open End Wrench

121816881
2513-32A: RNCC: 3 | RNVC: 9
VW113A: RNCC: 3 | RNVC: 9

10 Dec 1979

5120-12-364-3455
Ratchet Wrench

123643455
41131213-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-343-3835
Dreh Haltewerkzeug

123433835
406589053100: RNCC: 3 | RNVC: 2

12 Jun 1997

5120-12-133-6179
Grommet Inserting Punch And Die

121336179
1500020: RNCC: 3 | RNVC: 2
3630040: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-2808
Dista Auftreibrohr

121272808
WU57: RNCC: 3 | RNVC: 2
WU57: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-5772

5120-12-126-5982

5120-12-327-6645
Craftsman's Tweezers

123276645
5469R: RNCC: 3 | RNVC: 2
400000-3337-000: RNCC: 5 | RNVC: 2
108542: RNCC: 5 | RNVC: 2

14 Feb 1992

5120-12-159-5102
Screwdriver Bit

121595102
41-1,2X8: RNCC: 3 | RNVC: 2
01040012: RNCC: 5 | RNVC: 2
41-1,2X9: RNCC: 5 | RNVC: 9
41-1-2: RNCC: 5 | RNVC: 9
85-600-9021: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-129-3322
Socket Wrench Socket

121293322
1455-BA/2: RNCC: 3 | RNVC: 2
1019 BA2: RNCC: 3 | RNVC: 2
20-2BA: RNCC: 3 | RNVC: 2
616915: RNCC: 5 | RNVC: 2
H24129: RNCC: 5 | RNVC: 2
11121: RNCC: 5 | RNVC: 2
108788: RNCC: 5 | RNVC: 9
6700SEBA2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5840
Socket Wrench Socket

121235840
DIN3124-S30X20L: RNCC: 2 | RNVC: 2
56-30: RNCC: 3 | RNVC: 2
001589150900: RNCC: 5 | RNVC: 2
S30X20LDIN3124: RNCC: 5 | RNVC: 2
05020030: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-149-5828
Socket Wrench

121495828
NO PRIMARY REF 12-149-5828: RNCC: 3 | RNVC: 2
26R7-8X1WW: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-3643
Open End Wrench

121333643
NO PRIMARY REF 12-133-3643: RNCC: 3 | RNVC: 2
105837: RNCC: 5 | RNVC: 9
1953Z3-4X7-8: RNCC: 5 | RNVC: 9
1953Z3-4X-7-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-147-1919
Zentriervorrichtung

121471919
23176-264140-00-0: RNCC: 2 | RNVC: 2
23176-264140.00.0: RNCC: 2 | RNVC: 2
23176-264140-00-0: RNCC: 5 | RNVC: 2
23176-264140-00-0: RNCC: 5 | RNVC: 2
23176-264140.00.0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-126-2154
Screwdriver Bit

121262154
7090-7-5,5: RNCC: 3 | RNVC: 2
5010180: RNCC: 3 | RNVC: 2
800/9-7-5,5: RNCC: 5 | RNVC: 2
820H7-5-5: RNCC: 5 | RNVC: 2
52871255: RNCC: 5 | RNVC: 2
67090-7X5,5: RNCC: 5 | RNVC: 2
7090-7-0,8X5,0: RNCC: 5 | RNVC: 9
67405: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-373-5692
Quick Adjusting Screw Clamp

123735692
G60Z: RNCC: 3 | RNVC: 2

16 Nov 2007

5120-12-304-1802
Hand Terminal Crimping Tool

123041802
72990K06: RNCC: 3 | RNVC: 9

20 Jun 1985

5120-12-364-8601
Socket Wrench Crowfoot Attachment

123648601
02200032-TCS: RNCC: 3 | RNVC: 2

9 Nov 2004

5120-12-338-2603
Hyd Ausbauwerkzeug

123382603
4985062.000.01: RNCC: 3 | RNVC: 2

12 Jun 1995

5120-12-317-0401
Swivel Knob Jeweler's Screwdriver

123170401
26820: RNCC: 3 | RNVC: 9
1415-2,5X105: RNCC: 5 | RNVC: 9

7 Mar 1989

5120-12-147-4333
Dorn

121474333
1X46095100: RNCC: 3 | RNVC: 2
V95100-1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-131-7991
Grommet Inserting Punch And Die

121317991
1500025: RNCC: 3 | RNVC: 2
3630041: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-194-0808
Torque Wrench Adapter

121940808
TL5120-0086-100: RNCC: 2 | RNVC: 2
H24198: RNCC: 5 | RNVC: 2
6450C16: RNCC: 5 | RNVC: 2
7452-7 16: RNCC: 5 | RNVC: 9
6450C-16: RNCC: 5 | RNVC: 9
20/DC-16: RNCC: 5 | RNVC: 9
6263110009: RNCC: 5 | RNVC: 9
731/10 16: RNCC: 5 | RNVC: 9

29 Sep 1982

5120-12-176-6022
Jack Elevating Block

121766022
84184-3900-02: RNCC: 3 | RNVC: 2
84184-3900-02: RNCC: 5 | RNVC: 9

11 Dec 1978

5120-12-364-7247
Pedal Adjustment Tool Compressor

123647247
210589106300: RNCC: 3 | RNVC: 2
4900-14A: RNCC: 3 | RNVC: 2

22 Oct 2004

5120-12-196-8456
Socket Head Screw Key

121968456
ISO2936-18: RNCC: 2 | RNVC: 2
43022: RNCC: 3 | RNVC: 2
200-180-01: RNCC: 3 | RNVC: 2
00.40.43.66: RNCC: 5 | RNVC: 2
43222: RNCC: 5 | RNVC: 9
20415: RNCC: 5 | RNVC: 9
25102 18: RNCC: 5 | RNVC: 9
911CVB18: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-12-369-8514
Swivel Knob Jeweler's Screwdriver

123698514
05118004001: RNCC: 3 | RNVC: 2
2035-0,30X1,8X60: RNCC: 5 | RNVC: 2
118004: RNCC: 5 | RNVC: 9
2035-0,30X1,8: RNCC: 5 | RNVC: 9

22 Aug 2006

5120-12-352-1908
Socket Head Screw Key

123521908
TL5120-0132-I4: RNCC: 2 | RNVC: 2
500-090-08: RNCC: 3 | RNVC: 2
10766-T9: RNCC: 3 | RNVC: 2
00.43.02.34: RNCC: 5 | RNVC: 2
43220009: RNCC: 5 | RNVC: 2

24 Oct 2000

5120-12-391-8570
Pipe Mounting Tool

123918570
RTMT0-02-20: RNCC: 3 | RNVC: 2

12 Apr 2013

5120-12-173-6987
Screwdriver Bit

121736987
NO PRIMARY REF 12-173-6987: RNCC: 3 | RNVC: 2
109836: RNCC: 5 | RNVC: 9
7803-1: RNCC: 5 | RNVC: 9
1978-3: RNCC: 5 | RNVC: 9

3 May 1978

5120-12-133-2697
Stanz- Stempelsatz

121332697
TL5120-0059-5: RNCC: 2 | RNVC: 2
110: RNCC: 3 | RNVC: 2
705201030: RNCC: 5 | RNVC: 2
STPLL12: RNCC: 5 | RNVC: 2
5120-0059-6: RNCC: 5 | RNVC: 9
5120-059-6: RNCC: 5 | RNVC: 9
110: RNCC: 5 | RNVC: 9
STPLL12: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-2107

5120-12-348-3848
Socket Wrench Set

123483848
001589610900: RNCC: 3 | RNVC: 2
001 589 61 09 00: RNCC: 5 | RNVC: 2
001 589 61 09 00: RNCC: 5 | RNVC: 2

14 Jun 1999

5120-12-127-5311
Hand Terminal Crimping Tool

121275311
47387: RNCC: 3 | RNVC: 2
47387: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-311-0857
Ge Montierwerkzeug

123110857
435589013100: RNCC: 3 | RNVC: 2
435 589 013 100: RNCC: 5 | RNVC: 2

24 Jul 1987

5120-12-342-8969
Spanner Wrench

123428969
0003-0232-030: RNCC: 3 | RNVC: 2
0003-0232-030: RNCC: 5 | RNVC: 9

14 Apr 1997

5120-12-364-3130
Socket Wrench Socket

123643130
01030010-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-133-8141
Socket Wrench

121338141
NO PRIMARY REF 12-133-8141: RNCC: 3 | RNVC: 2
499201-3188: RNCC: 5 | RNVC: 2
105202: RNCC: 5 | RNVC: 9
1937M22: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5291
Box Wrench

121235291
2Z-19/32-11/16: RNCC: 3 | RNVC: 2
2-19-32X11-16: RNCC: 3 | RNVC: 2
20A-19/32X11/16: RNCC: 3 | RNVC: 2
180141: RNCC: 5 | RNVC: 2
602205: RNCC: 5 | RNVC: 2
41443538: RNCC: 5 | RNVC: 2
2C-Z-19/32X11/16: RNCC: 5 | RNVC: 9
2-413: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-390-1233
Bearing And Bushing Inserter

123901233
437589011500: RNCC: 3 | RNVC: 2

8 Oct 2012

5120-12-363-8863
Bearing And Bushing Inserter

123638863
T670P5001232: RNCC: 3 | RNVC: 2

3 Aug 2004

5120-12-360-5998
Pliers

123605998
0005383930: RNCC: 3 | RNVC: 2
53042125: RNCC: 3 | RNVC: 2
2724B: RNCC: 3 | RNVC: 2

13 Jun 2003

5120-12-351-4248
Auswechs Klemmteil

123514248
9255324000: RNCC: 3 | RNVC: 2

25 Jul 2000

5120-12-364-4634
Bearing And Bushing Inserter

123644634
200 890 011: RNCC: 3 | RNVC: 2

29 Sep 2004

5120-12-364-5651
Open End Box Wrench

123645651
41080810-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-336-5088
Pin Inserter

123365088
0852 5018: RNCC: 3 | RNVC: 2
8525018: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-333-8750
Splicing Sleeve Compressing Tool

123338750
901 500 000: RNCC: 3 | RNVC: 2

21 Feb 1994

5120-12-187-6315
Torque Wrench Adapter

121876315
2365/13: RNCC: 3 | RNVC: 2
N4.2.5SW13: RNCC: 5 | RNVC: 2

21 Apr 1981

5120-12-152-7353
Swivel Knob Jeweler's Screwdriver Set

121527353
2025/0 BS-8: RNCC: 3 | RNVC: 2
DIN8320-BS8: RNCC: 4 | RNVC: 1
WH 110: RNCC: 5 | RNVC: 2
190-972-ODER974: RNCC: 5 | RNVC: 9
190-972-0DER974: RNCC: 5 | RNVC: 9
C 5719 981 B: RNCC: 5 | RNVC: 9
370000-0015.365: RNCC: 5 | RNVC: 9
C 5719 981 B: RNCC: 5 | RNVC: 9
TL5180-0086-38: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-3421
Stanz- Stempelsatz

123303421
TL5120-0059-21: RNCC: 2 | RNVC: 2

3 Dec 1992

5120-12-133-2528
Stitch Spacing Marker

121332528
TL5180-0052-27: RNCC: 2 | RNVC: 2
1099GR2: RNCC: 5 | RNVC: 9
5180-0052-27: RNCC: 5 | RNVC: 9
5180-052-27: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-3457
Mattock-Pick Handle

121713457
DIN6437-800X76: RNCC: 2 | RNVC: 9
800X76DIN6437: RNCC: 5 | RNVC: 9

30 Sep 1977

5120-12-321-1676
Mechanical Puller

123211676
0852 5118: RNCC: 3 | RNVC: 2
8525118: RNCC: 5 | RNVC: 2
8525118FC9368-64: RNCC: 5 | RNVC: 2

6 Apr 1990

5120-12-131-4326
Saddler's Harness Awl Blade

121314326
TL5120-0114-4: RNCC: 2 | RNVC: 2
265-90MM: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-390-4303
Mechanical Puller Forcing Screw

123904303
F6559647: RNCC: 3 | RNVC: 2
40525: RNCC: 5 | RNVC: 2

13 Nov 2012

5120-12-377-3389
Slip Joint Pliers

123773389
061352: RNCC: 3 | RNVC: 2

12 Jan 2009

5120-12-345-3069
Montierhuelse

123453069
F3 0275387: RNCC: 3 | RNVC: 2

2 Mar 1998

5120-12-322-4415
Drive Pin Punch

123224415
54.0070.145.02: RNCC: 2 | RNVC: 2
54.0070.145.02: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-12-021-5701

5120-12-040-6763

5120-12-091-3263

5120-12-368-1174
Hose Strap Band Clamping Tool

123681174
ERG299-TCS: RNCC: 3 | RNVC: 2

12 Dec 2005

5120-12-194-6689
Pliers

121946689
NO PRIMARY REF 12-194-6689: RNCC: 3 | RNVC: 2
2790A: RNCC: 5 | RNVC: 9

25 Nov 1982

5120-12-388-3859
Open End Wrench

123883859
11-40300-00: RNCC: 3 | RNVC: 2

16 Mar 2012

5120-12-371-4034
Socket Head Screw Key

123714034
520-081-07: RNCC: 3 | RNVC: 2
00.43.37.69: RNCC: 5 | RNVC: 2

26 Mar 2007

5120-12-343-5094
Spanner Wrench

123435094
038.002.0: RNCC: 3 | RNVC: 2
038.002.0-4: RNCC: 5 | RNVC: 2

30 Jun 1997

5120-12-339-9700
Mechanical Puller

123399700
5078406: RNCC: 3 | RNVC: 2
698-430-0051: RNCC: 5 | RNVC: 2

7 Feb 1996

5120-12-351-9580
Socket Head Screw Key

123519580
ISO2936-30: RNCC: 2 | RNVC: 2

20 Sep 2000

5120-12-303-7852
Spanner Wrench

123037852
009-030.140-000W8: RNCC: 3 | RNVC: 2

26 Apr 1985

5120-12-360-5113
Flat Tip Screwdriver

123605113
191012255B: RNCC: 3 | RNVC: 2

28 May 2003

5120-12-310-9007
Mechanical Puller Step Plate

123109007
304589183300: RNCC: 3 | RNVC: 2

7 Jul 1987

5120-12-358-7332
Pliers

123587332
1221-170: RNCC: 3 | RNVC: 2

8 Nov 2002

5120-12-199-0790
Wrench

121990790
TG70: RNCC: 3 | RNVC: 2

23 Mar 1984

5120-12-154-9455
Tacker

121549455
58L: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-320-7115
Pedal Adjustment Tool Compressor

123207115
309589053100: RNCC: 3 | RNVC: 2

8 Feb 1990

5120-12-331-7068
Mechanical Puller Attachment

123317068
80996100009: RNCC: 3 | RNVC: 2
80.99610.0009: RNCC: 5 | RNVC: 2

9 Jun 1993

5120-12-145-4277
Vise Jaw Caps

121454277
NO PRIMARY REF 12-145-4277: RNCC: 3 | RNVC: 2
5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-9862
Kolbenst Auszieher

123819862
26.8454-88-40-00.00-00: RNCC: 3 | RNVC: 2
1210903: RNCC: 5 | RNVC: 2

23 Apr 2010

5120-12-153-2221
Steckkar Auszieher

121532221
52-0061-142-00: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-305-2535
Rohrbieger Dorn

123052535
5-3/80-022-000-21427: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-199-3130
Socket Wrench

121993130
2-72-2005: RNCC: 3 | RNVC: 2
2-72-2005: RNCC: 5 | RNVC: 2

11 Apr 1984

5120-12-364-6765
Drive Pin Punch

123646765
70090003-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-321-2967
Drain Plug Wrench

123212967
1338401: RNCC: 3 | RNVC: 2
GZ13384B: RNCC: 5 | RNVC: 2

30 Apr 1990

5120-12-381-4835
Bearing And Bushing Inserter And Remover Set

123814835
117-80168W2: RNCC: 3 | RNVC: 2

22 Feb 2010

5120-12-157-6767
Crimping Tool Die

121576767
WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-5425
Mechanical Puller

121265425
1875890235: RNCC: 3 | RNVC: 2
1875890235: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-1555

5120-12-155-0190
Lamp Extractor

121550190
54.2502.007.00: RNCC: 3 | RNVC: 2
54-2502-007-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-313-5359
Mechanical Puller

123135359
4507-25110.00: RNCC: 3 | RNVC: 2

13 Apr 1988

5120-12-377-1113
Mechanical Puller

123771113
12614-1: RNCC: 3 | RNVC: 2
71040011: RNCC: 5 | RNVC: 2

11 Dec 2008

5120-12-387-1242
Electrical Contact Remover

123871242
1830-18103: RNCC: 3 | RNVC: 2
80.99606-6137: RNCC: 5 | RNVC: 2
80996066137: RNCC: 5 | RNVC: 2

8 Nov 2011

5120-12-150-3959
Ke Haltevorrichtung

121503959
1X46106176: RNCC: 3 | RNVC: 2
V106176: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-364-9571
Swivel Knob Jeweler's Screwdriver

123649571
4877X ESD TX09X60: RNCC: 3 | RNVC: 2
T4877XESDTX09X60: RNCC: 5 | RNVC: 9

18 Nov 2004

5120-12-130-7942
Loch- Und Nietgerae

121307942
642: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-336-5068
Bearing And Bushing Inserter

123365068
0852 4106: RNCC: 3 | RNVC: 2
8524106: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-139-3038

5120-12-139-3141

5120-12-126-2524
Screwdriver Bit

121262524
DIN8320-0,4X2,5KLINGE: RNCC: 2 | RNVC: 2
0-4X2-5DIN8320KLINGE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-321-2189
Drahthake Aufnahme

123212189
5803462-200-00: RNCC: 2 | RNVC: 2
FE97-200-00: RNCC: 3 | RNVC: 2
5803462-200-00: RNCC: 5 | RNVC: 2

19 Apr 1990

5120-12-123-5003
Open End Wrench

121235003
DIN895-30X32: RNCC: 2 | RNVC: 2
895-30X32: RNCC: 3 | RNVC: 2
K65005: RNCC: 3 | RNVC: 2
30X32DIN895: RNCC: 5 | RNVC: 2
895-30X32: RNCC: 5 | RNVC: 2
413311008000: RNCC: 5 | RNVC: 2
K65005: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-150-3915
Fuehrungs- Huelse

121503915
1X46900382: RNCC: 3 | RNVC: 2
V90038-2: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-362-7002
Socket Wrench Socket

123627002
850-3: RNCC: 3 | RNVC: 2

19 Mar 2004

5120-12-191-0671
Oese

121910671
365 0010: RNCC: 3 | RNVC: 2
365 0010-000-00.3: RNCC: 3 | RNVC: 2
3650010: RNCC: 5 | RNVC: 9

11 Jan 1982

5120-12-381-8869
Spanner Wrench

123818869
915.259.000: RNCC: 3 | RNVC: 2

14 Apr 2010

5120-12-364-2334
Seal Inserter And Remover

123642334
F6782492: RNCC: 3 | RNVC: 2

2 Sep 2004

5120-12-174-5301
Hand Screw Jack

121745301
U936: RNCC: 3 | RNVC: 2

5 Jul 1978

5120-12-193-7493
Ratchet Wrench

121937493
C12: RNCC: 3 | RNVC: 2

26 Aug 1982

5120-12-336-5071
Seal Inserter And Remover

123365071
0850 8998: RNCC: 3 | RNVC: 2
8508998: RNCC: 5 | RNVC: 2

21 Nov 1994

5120-12-362-6414
Swivel Knob Jeweler's Screwdriver Set

123626414
54.0084.961.61: RNCC: 3 | RNVC: 2
52714300: RNCC: 5 | RNVC: 2

13 Mar 2004

5120-12-358-4057
Crimping Tool Die

123584057
974909: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-12-133-3764
Socket Wrench Crowfoot Attachment

121333764
FC20: RNCC: 3 | RNVC: 2
540A5-8: RNCC: 3 | RNVC: 2
02500036: RNCC: 5 | RNVC: 2
AN8506-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-372-7553
Spatula

123727553
5/10: RNCC: 3 | RNVC: 2

17 Aug 2007

5120-12-123-5226
Box Wrench

121235226
DIN837-A12X14: RNCC: 2 | RNVC: 2
A12X14DIN837: RNCC: 5 | RNVC: 2
A12X14DIN837GALNI8: RNCC: 5 | RNVC: 9
22-12X14: RNCC: 5 | RNVC: 9
41061214: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-375-5387
Slip Joint Pliers

123755387
87 01 180: RNCC: 3 | RNVC: 2
4003773013297: RNCC: 5 | RNVC: 2
705800-180: RNCC: 5 | RNVC: 2
8701180: RNCC: 5 | RNVC: 9

11 Jun 2008

5120-12-368-5500
Open End Wrench

123685500
DIN3110-34X36: RNCC: 2 | RNVC: 2
6-34X36: RNCC: 3 | RNVC: 2
40033436: RNCC: 3 | RNVC: 2

23 Mar 2006

5120-12-151-5395
Auswechselwe Griff

121515395
2360-264152.00.0: RNCC: 2 | RNVC: 2
2360-264152.00.0: RNCC: 3 | RNVC: 2
2360-264152.00.0: RNCC: 5 | RNVC: 2
2360-264152-00-0: RNCC: 5 | RNVC: 2
2360-264152-00-0: RNCC: 5 | RNVC: 2
2360-264152.00.0: RNCC: 5 | RNVC: 9
2360-264152-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-154-6176
Kolben Spannband

121546176
820589046100: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-382-1636
Inspecti Extension

123821636
JA 90 000 103: RNCC: 3 | RNVC: 2

18 May 2010

5120-12-169-2821
Screw Thread Insert Tang Breakoff Tool

121692821
01586140000: RNCC: 3 | RNVC: 2
01585140000: RNCC: 5 | RNVC: 9

3 May 1977

5120-12-005-0338

5120-12-156-1673
Tap And Reamer Wrench

121561673
NM495-05: RNCC: 3 | RNVC: 2
NM495-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-175-9219
Ratchet Wrench

121759219
NO PRIMARY REF 12-175-9219: RNCC: 3 | RNVC: 2
96180524: RNCC: 5 | RNVC: 9
00180524: RNCC: 5 | RNVC: 9
553V24: RNCC: 5 | RNVC: 9

25 Oct 1978

5120-12-130-7962
Einschlag- Huelse

121307962
NO PRIMARY REF 12-130-7962: RNCC: 3 | RNVC: 2
1243: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-6419
Drahtwickler

123056419
HW-UW-30: RNCC: 3 | RNVC: 9
HW-UW-30: RNCC: 5 | RNVC: 9
HW-UW-30: RNCC: 5 | RNVC: 9
08L640: RNCC: 5 | RNVC: 9

28 Nov 1985

5120-12-134-2700
Piston Ring Expander

121342700
018M01000: RNCC: 3 | RNVC: 2
VM52862: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-361-9966
Inserted Hammer Face

123619966
7157216: RNCC: 3 | RNVC: 2

15 Dec 2003

5120-12-338-0657
Hand Scissors Jack

123380657
171011031H: RNCC: 3 | RNVC: 2

17 May 1995

5120-12-700-7938
Hand Hydraulic Jack

127007938
HEBER,HYDR-OST-TLF32: RNCC: 2 | RNVC: 2

26 May 1993

5120-12-364-6755
Retaining Ring Pliers

123646755
65456000-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-357-7726
Pliers

123577726
791/1: RNCC: 3 | RNVC: 2

22 Jul 2002

5120-12-358-7779
Bearing And Bushing Inserter

123587779
80996176003: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-092-3872

5120-12-186-7347
Mechanical Puller Step Plate

121867347
99374001: RNCC: 3 | RNVC: 2
410440: RNCC: 5 | RNVC: 9
410440: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-339-2173
Pliers

123392173
3532115ESD: RNCC: 3 | RNVC: 2
024859: RNCC: 5 | RNVC: 2

25 Oct 1995

5120-12-346-4034
Socket Wrench

123464034
14 34 423: RNCC: 3 | RNVC: 2

21 Jul 1998

Load More Results