What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 14 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 14 of 62

5120-12-364-4723
Socket Head Screw Key

123644723
43550006-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-306-7428
Spanner Wrench

123067428
9031282: RNCC: 3 | RNVC: 2
32400053300000: RNCC: 5 | RNVC: 2

25 Mar 1986

5120-12-332-6911
Spanner Wrench

123326911
9108510214: RNCC: 3 | RNVC: 2

7 Sep 1993

5120-12-121-6889

5120-12-195-0079
Mechanical Puller Attachment

121950079
1X56122208: RNCC: 3 | RNVC: 2

29 Dec 1982

5120-12-172-6489
Dorn

121726489
1X56136697: RNCC: 3 | RNVC: 2
V136697: RNCC: 5 | RNVC: 2
0535940: RNCC: 5 | RNVC: 2

3 Feb 1978

5120-12-129-1391
Crowfoot Wrench Head Socket

121291391
NO PRIMARY REF 12-129-1391: RNCC: 3 | RNVC: 2
108398: RNCC: 5 | RNVC: 9
5130Z15-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-363-4446
Tap And Reamer Wrench

123634446
FF9990001C: RNCC: 3 | RNVC: 2

16 Jun 2004

5120-12-166-2579
Abziehglocke

121662579
1680506005: RNCC: 3 | RNVC: 2
550 589 32 59-00: RNCC: 5 | RNVC: 2
5505893259/00: RNCC: 5 | RNVC: 2
550589325900: RNCC: 5 | RNVC: 2
KDAW9995-40: RNCC: 5 | RNVC: 9

19 Aug 1976

5120-12-181-5093
Ein- Und Ausziehvor

121815093
143630: RNCC: 3 | RNVC: 2
698-776-0000: RNCC: 5 | RNVC: 2
89231042: RNCC: 5 | RNVC: 2
181225: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-335-4449
Mechanical Puller

123354449
0852 5030: RNCC: 3 | RNVC: 2
8525030: RNCC: 5 | RNVC: 2

18 Aug 1994

5120-12-315-0625
Spanner Wrench

123150625
DIN6368-27: RNCC: 2 | RNVC: 2
52204: RNCC: 3 | RNVC: 2

10 Sep 1988

5120-12-194-8850
Hand Klaue Stange

121948850
5100225-100-01: RNCC: 2 | RNVC: 2
5100225-100-01: RNCC: 3 | RNVC: 2

15 Dec 1982

5120-12-127-5313
Torque Wrench

121275313
DSH2: RNCC: 3 | RNVC: 2
414-0176-01: RNCC: 5 | RNVC: 2
5120-40362: RNCC: 6 | RNVC: 9

30 May 1969

5120-12-130-1794
Schluessel

121301794
NO PRIMARY REF 12-130-1794: RNCC: 3 | RNVC: 2
10H1246: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-176-7349
Buchse

121767349
VG95211-ML-121767349: RNCC: 2 | RNVC: 2
1121-31502W1-05: RNCC: 3 | RNVC: 2

15 Dec 1978

5120-12-127-8572

5120-12-700-6198
Spade

127006198
4201450: RNCC: 3 | RNVC: 2
STANDARDSPATEN: RNCC: 5 | RNVC: 9

29 Sep 1992

5120-12-093-7210

5120-12-351-9375
Mechanical Puller Attachment

123519375
CBD45308P02: RNCC: 3 | RNVC: 2

19 Sep 2000

5120-12-338-0076
Gl Montierwerkzeug

123380076
7129131100: RNCC: 3 | RNVC: 2

10 May 1995

5120-12-340-7083
Piston Inserter

123407083
1212 8427: RNCC: 3 | RNVC: 2

29 May 1996

5120-12-372-0289
Flat Tip Screwdriver

123720289
MAT0050145: RNCC: 3 | RNVC: 2

12 Jun 2007

5120-12-300-3212
Ausdrueckwerkzeug

123003212
117-31706W1: RNCC: 3 | RNVC: 2

24 Jul 1984

5120-12-177-2186
Socket Wrench Socket

121772186
NO PRIMARY REF 12-177-2186: RNCC: 3 | RNVC: 2
01720099: RNCC: 5 | RNVC: 9
40EL0BA: RNCC: 5 | RNVC: 9

19 Jan 1979

5120-12-327-5548
Spanner Wrench

123275548
009-030.183-004W4: RNCC: 3 | RNVC: 2

3 Feb 1992

5120-12-359-7511
Seal Inserter And Remover

123597511
T622P3006101: RNCC: 3 | RNVC: 2

7 Mar 2003

5120-12-344-1066
Quick Adjusting Screw Clamp

123441066
TG80S12: RNCC: 3 | RNVC: 2

11 Sep 1997

5120-12-198-2542
Ku Montierwerkzeug

121982542
5259202: RNCC: 3 | RNVC: 2
52-59202-1: RNCC: 5 | RNVC: 2

5 Jan 1984

5120-12-147-8909
Spanner Wrench

121478909
6176245: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-4890
Sheet Metalworking Dolly Block

121234890
031A311: RNCC: 3 | RNVC: 2
3041: RNCC: 5 | RNVC: 2
2032: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-344-0103
Torque Wrench Multiplier

123440103
10200000: RNCC: 3 | RNVC: 2

28 Aug 1997

5120-12-358-7765
Schluessel

123587765
80996036006: RNCC: 3 | RNVC: 2

13 Nov 2002

5120-12-381-2036
Spanner Wrench

123812036
DIN1810-A300-320: RNCC: 2 | RNVC: 2
54841: RNCC: 3 | RNVC: 2

20 Jan 2010

5120-12-377-6418
Driftpin

123776418
235588: RNCC: 3 | RNVC: 2
94607-412.01: RNCC: 5 | RNVC: 2
235588: RNCC: 5 | RNVC: 2

30 Jan 2009

5120-12-177-5785
Torque Wrench Adapter

121775785
UHB301-24: RNCC: 3 | RNVC: 2
UHB301-24: RNCC: 5 | RNVC: 9

7 Feb 1979

5120-12-307-1721
Machinist's Vise

123071721
874100-160: RNCC: 3 | RNVC: 2
87410150: RNCC: 5 | RNVC: 2
10206AND10216: RNCC: 5 | RNVC: 9

16 May 1986

5120-12-190-1805
Socket Wrench Extension

121901805
2360-264433.00.0: RNCC: 2 | RNVC: 2
2360-264433.00.0: RNCC: 3 | RNVC: 2
2360-264433.00.0: RNCC: 5 | RNVC: 2
2360-264433-00-0: RNCC: 5 | RNVC: 9
2360-264433.00.0: RNCC: 5 | RNVC: 9

10 Nov 1981

5120-12-383-7428
Socket Wrench Screwdriver Attachment

123837428
54TX-T70: RNCC: 3 | RNVC: 2
4018754132362: RNCC: 5 | RNVC: 2
03100070: RNCC: 5 | RNVC: 2
4700729: RNCC: 5 | RNVC: 2
FORTUM TX70-1/2INX55: RNCC: 5 | RNVC: 2

2 Dec 2010

5120-12-355-3190
Drive Pin Punch

123553190
4909766: RNCC: 3 | RNVC: 2
6503.201.10.01.002: RNCC: 5 | RNVC: 2

31 Oct 2001

5120-12-010-1547

5120-12-315-2898
Mechanical Puller

123152898
0852 0678: RNCC: 3 | RNVC: 2
8520678: RNCC: 5 | RNVC: 2
MAGERD 5587: RNCC: 5 | RNVC: 9

11 Oct 1988

5120-12-384-9739
Socket Wrench Handle

123849739
918.3997: RNCC: 3 | RNVC: 2

14 Apr 2011

5120-12-139-3169

5120-12-304-6560
Rohr Heber

123046560
HK 398165: RNCC: 3 | RNVC: 2
HK 398165: RNCC: 5 | RNVC: 2

12 Aug 1985

5120-12-151-8431

5120-12-170-2610

5120-12-131-4614
Socket Wrench Socket

121314614
JD5120-12-131-4614: RNCC: 3 | RNVC: 2
40ADSQ3-8: RNCC: 5 | RNVC: 2
01430024: RNCC: 5 | RNVC: 2
108781: RNCC: 5 | RNVC: 9
850AK3-8: RNCC: 5 | RNVC: 9
6700AZ3-8: RNCC: 5 | RNVC: 9
6700AZ3-8IN: RNCC: 5 | RNVC: 9
54566: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-139-8580

5120-12-010-5182

5120-12-137-8395
Hammer Handle

121378395
DIN5135-300-B-ES: RNCC: 2 | RNVC: 2
A300DIN5135: RNCC: 5 | RNVC: 9
A300DIN5135BLACKIERT: RNCC: 5 | RNVC: 9
DIN5135-A300BLACKIERT: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-318-9080
Hand Tube Bender

123189080
0-10-000-000-40300: RNCC: 3 | RNVC: 2

24 Aug 1989

5120-12-309-7042
Spanner Wrench

123097042
25010815: RNCC: 3 | RNVC: 2
14021-12002W0601: RNCC: 5 | RNVC: 2
14021-12002W6: RNCC: 5 | RNVC: 9

18 Feb 1987

5120-12-325-9999
Dreh Haltewerkzeug

123259999
603589012100: RNCC: 3 | RNVC: 2

29 Jul 1991

5120-12-381-8946
Socket Wrench Extension

123818946
F1.4928-00-98-00.33-00: RNCC: 3 | RNVC: 2
1202522: RNCC: 5 | RNVC: 2

15 Apr 2010

5120-12-134-2634
Stabf Gewindegriff

121342634
244018: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-339-9694
Ausdrueckwerkzeug

123399694
5069593: RNCC: 3 | RNVC: 2
698-463-0010: RNCC: 5 | RNVC: 2

7 Feb 1996

5120-12-177-1000
Buchse

121771000
VG95211-ML-121771000: RNCC: 2 | RNVC: 2
105-60701W5.01: RNCC: 3 | RNVC: 2
105-60701W5-01: RNCC: 5 | RNVC: 2

15 Jan 1979

5120-12-344-6004
Ge Montierwerkzeug

123446004
1X56112776: RNCC: 3 | RNVC: 2

12 Nov 1997

5120-12-300-7796
Mechanical Puller Step Plate

123007796
389589066300: RNCC: 3 | RNVC: 2
0963239: RNCC: 5 | RNVC: 2
0963239: RNCC: 5 | RNVC: 9

30 Aug 1984

5120-12-339-7362
Socket Head Screw Key

123397362
ZG8144T006: RNCC: 3 | RNVC: 2
51605-104: RNCC: 3 | RNVC: 2
ZG8144T006: RNCC: 5 | RNVC: 9

8 Jan 1996

5120-12-140-5460
Schmiede Untersatz

121405460
NO PRIMARY REF 12-140-5460: RNCC: 3 | RNVC: 2
510079A: RNCC: 5 | RNVC: 9
14200 UND 14200-1: RNCC: 5 | RNVC: 9
5120-0039ITEMA: RNCC: 5 | RNVC: 9
5120-039ITEMA: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-140-4939

5120-12-178-4624
Ausbauwerkzeug

121784624
CET0: RNCC: 3 | RNVC: 2

26 Apr 1979

5120-12-196-7847
Ratchet Wrench

121967847
RBM1213S: RNCC: 3 | RNVC: 2

16 Aug 1983

5120-12-366-6001
Zange Einsatz

123666001
202681: RNCC: 3 | RNVC: 2

11 May 2005

5120-12-337-5479
Torque Wrench

123375479
75720: RNCC: 3 | RNVC: 9
7114C: RNCC: 5 | RNVC: 9

10 Mar 1995

5120-12-329-9801
Mitnehmersch Stift

123299801
0852 3140.004: RNCC: 3 | RNVC: 2
8523140.004: RNCC: 5 | RNVC: 2

17 Oct 1992

5120-12-378-3745
Socket Wrench Handle

123783745
863F: RNCC: 3 | RNVC: 2
4000896061471: RNCC: 5 | RNVC: 2

1 Apr 2009

5120-12-157-0671

5120-12-315-3138
Bearing And Bushing Remover

123153138
4900153-31311-00: RNCC: 3 | RNVC: 2
4900153-31311-00: RNCC: 5 | RNVC: 9

12 Oct 1988

5120-12-176-7306
Einpreszwerkzeug

121767306
VG95211-ML-121767306: RNCC: 2 | RNVC: 2
105-42123W2: RNCC: 3 | RNVC: 2

15 Dec 1978

5120-12-374-3683
Socket Wrench Extension

123743683
11010012-TCS: RNCC: 3 | RNVC: 2

12 Feb 2008

5120-12-152-7535
Blindniete Zugkopf

121527535
TL5120-0061SEC2-1-7: RNCC: 2 | RNVC: 2
5120-0061SEC2-1-7: RNCC: 5 | RNVC: 9
5120-061SEC2-1-7: RNCC: 5 | RNVC: 9
411545: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-1246
Ratchet Wrench

123641246
50 500 34 901: RNCC: 3 | RNVC: 2
8691840023: RNCC: 5 | RNVC: 2

21 Aug 2004

5120-12-336-5846
Montierdorn

123365846
0850 6464: RNCC: 3 | RNVC: 2
8506464: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-192-3636
Screwdriver Bit

121923636
VM86084: RNCC: 3 | RNVC: 2

19 Apr 1982

5120-12-177-7514
Magnet

121777514
326000: RNCC: 3 | RNVC: 9
326A: RNCC: 5 | RNVC: 9

16 Feb 1979

5120-12-190-3447
Socket Wrench Socket

121903447
101600: RNCC: 3 | RNVC: 2
698-728-0000: RNCC: 5 | RNVC: 2

23 Nov 1981

5120-12-144-0364
Screwdriver Bit

121440364
0101-47-2-10: RNCC: 3 | RNVC: 2
0101-47-2-10: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-172-5261
Craftsman's Tweezers

121725261
5580: RNCC: 3 | RNVC: 2
154792: RNCC: 5 | RNVC: 2

23 Jan 1978

5120-12-309-9588
Socket Wrench Handle Bar

123099588
3740169: RNCC: 3 | RNVC: 2

23 Mar 1987

5120-12-140-9211
Dorn

121409211
4615E: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-1327

5120-12-149-8099
Aufziehvorrichtung

121498099
67-101A2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-360-1045
Wrench Extension Handle

123601045
AS576-1833A-04-03: RNCC: 3 | RNVC: 2

8 Apr 2003

5120-12-347-1872
Montierdorn

123471872
0853 1029: RNCC: 3 | RNVC: 2

10 Nov 1998

5120-12-382-7487
Drive Pin Punch

123827487
70070004-TCS: RNCC: 3 | RNVC: 2

4 Aug 2010

5120-12-318-6912
Combination Box And Open End Wrench

123186912
DIN3113-AK5,5: RNCC: 3 | RNVC: 9
698-704-0041: RNCC: 5 | RNVC: 2

8 Aug 1989

5120-12-362-4716
Flat Tip Screwdriver

123624716
54.0084.960.15: RNCC: 3 | RNVC: 2
8030-5.5-25: RNCC: 5 | RNVC: 2

27 Feb 2004

5120-12-371-3898
Leveling-Support Jack Set

123713898
272B00002: RNCC: 3 | RNVC: 2
6.542-032.0: RNCC: 5 | RNVC: 2

22 Mar 2007

5120-12-315-7640
Socket Head Screw Key

123157640
334-77: RNCC: 3 | RNVC: 2

25 Nov 1988

5120-12-130-3391

5120-12-358-2746
Socket Wrench

123582746
71112316193: RNCC: 3 | RNVC: 2

7 Oct 2002

5120-12-362-3161
Torque Wrench Adapter

123623161
2446-STT 70: RNCC: 3 | RNVC: 2
2446-STT 70: RNCC: 5 | RNVC: 2

5 Feb 2004

5120-12-374-9376
Mechanical Puller Attachment

123749376
5177356: RNCC: 3 | RNVC: 2
438373: RNCC: 5 | RNVC: 2

8 Apr 2008

5120-12-370-3513
Drahthakenst Stiel

123703513
1045: RNCC: 3 | RNVC: 2

27 Oct 2006

5120-12-135-2247
Socket Wrench

121352247
NO PRIMARY REF 12-135-2247: RNCC: 3 | RNVC: 2
4244D65040800: RNCC: 5 | RNVC: 2
D65040800: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-172-8624
Socket Wrench

121728624
9291380455: RNCC: 3 | RNVC: 2
40-126-682: RNCC: 5 | RNVC: 2
844072: RNCC: 5 | RNVC: 2
929-138-0455: RNCC: 5 | RNVC: 2
003.526.030.120: RNCC: 5 | RNVC: 9
5J3909: RNCC: 6 | RNVC: 9

27 Feb 1978

5120-12-041-8728

5120-12-353-8357
Montierdorn

123538357
CBD45320P01: RNCC: 3 | RNVC: 2

15 May 2001

5120-12-176-1336

5120-12-366-8625
Socket Wrench Crowfoot Attachment

123668625
440MJ10: RNCC: 3 | RNVC: 2
01210010: RNCC: 5 | RNVC: 2
01210010: RNCC: 5 | RNVC: 2

16 Jun 2005

5120-12-150-9038
Schluessel

121509038
A14NAN2258: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-307-0024
Zy Montierwerkzeug

123070024
9030022: RNCC: 3 | RNVC: 2

25 Apr 1986

5120-12-319-9804
Rivet Bucking Bar

123199804
602: RNCC: 3 | RNVC: 2

24 Nov 1989

5120-12-351-4407
Montierhuelse

123514407
8343 798 002: RNCC: 3 | RNVC: 2

26 Jul 2000

5120-12-325-5627
Seal Inserter

123255627
366589001500: RNCC: 3 | RNVC: 2

18 Jun 1991

5120-12-385-1843
Screwdriver Bit

123851843
27079: RNCC: 3 | RNVC: 2
2859-PH2: RNCC: 5 | RNVC: 2

9 May 2011

5120-12-361-1202
Box Wrench

123611202
CBD32569G01: RNCC: 3 | RNVC: 2

26 Aug 2003

5120-12-388-6734
Installation And Re

123886734
113.219: RNCC: 3 | RNVC: 2
113.219: RNCC: 5 | RNVC: 2

12 Apr 2012

5120-12-362-4252
Ausdrueckwerkzeug

123624252
1X53 174 806: RNCC: 3 | RNVC: 2

19 Feb 2004

5120-12-310-4616
Socket Head Screw Key

123104616
08123701000: RNCC: 3 | RNVC: 2
08123701145: RNCC: 5 | RNVC: 2
0812 370 1145: RNCC: 5 | RNVC: 9

22 May 1987

5120-12-384-9707
Flat Tip Screwdriver

123849707
911.1141: RNCC: 3 | RNVC: 2

14 Apr 2011

5120-12-371-4022
Socket Head Screw Key Set

123714022
211-298-51: RNCC: 3 | RNVC: 2
00.41.45.71: RNCC: 5 | RNVC: 2

26 Mar 2007

5120-12-361-1934
Spanner Wrench

123611934
000-070: RNCC: 3 | RNVC: 2

2 Sep 2003

5120-12-309-6572
Schluessel

123096572
335927-9038.000: RNCC: 3 | RNVC: 2
6264.10-12: RNCC: 5 | RNVC: 2
335927-9038-000: RNCC: 5 | RNVC: 9
335927-9038.000: RNCC: 5 | RNVC: 9

13 Feb 1987

5120-12-155-9385
Spanner Wrench

121559385
1096950-30: RNCC: 2 | RNVC: 2
NM011-11-2: RNCC: 5 | RNVC: 2
NM011-11-2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-137-8104
Jaw Cable Grip

121378104
18-1-12: RNCC: 3 | RNVC: 2
50359-1-12: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-2949
Screw Extractor

121262949
TL5120-0052-30A: RNCC: 2 | RNVC: 2
1412-4,8: RNCC: 3 | RNVC: 2
906/2: RNCC: 3 | RNVC: 2
104044: RNCC: 5 | RNVC: 2
1412: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-121-4805

5120-12-139-3085
Schluessel

121393085
8205893607: RNCC: 3 | RNVC: 2
023M03600: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-379-2016
Bearing And Bushing Inserter And Remover

123792016
105-42121W5: RNCC: 3 | RNVC: 2

2 Jul 2009

5120-12-389-3347
Torque Wrench Adapter

123893347
210589001600: RNCC: 3 | RNVC: 2
210589001600: RNCC: 5 | RNVC: 2

21 Jun 2012

5120-12-330-0165
Schluessel

123300165
9689160065: RNCC: 3 | RNVC: 2
91729483: RNCC: 5 | RNVC: 2

22 Oct 1992

5120-12-363-9036
Bearing And Bushing Inserter

123639036
T670P5001244: RNCC: 3 | RNVC: 2

4 Aug 2004

5120-12-168-5270
Ausziehvorrichtung

121685270
0276161101: RNCC: 3 | RNVC: 2

18 Mar 1977

5120-12-340-7274
Socket Head Screw Key

123407274
334-4,0X350: RNCC: 3 | RNVC: 2
009150: RNCC: 5 | RNVC: 2
4010995009150: RNCC: 5 | RNVC: 2

31 May 1996

5120-12-394-5414
Mounting Lever

123945414
4.006-415.0: RNCC: 3 | RNVC: 2

11 Dec 2013

5120-12-153-7961
Socket Wrench Socket

121537961
CH1773-21: RNCC: 3 | RNVC: 2
5605890408/00: RNCC: 5 | RNVC: 2
560589040800: RNCC: 5 | RNVC: 2
CH1773-21: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-340-2332
Mechanical Puller Attachment

123402332
0851 6640.001: RNCC: 3 | RNVC: 2
1383788: RNCC: 5 | RNVC: 9

16 Mar 1996

5120-12-355-1889
Spanner Wrench

123551889
B59600: RNCC: 3 | RNVC: 2

22 Oct 2001

5120-12-342-1653
Ge Montierwerkzeug

123421653
1X56119914: RNCC: 3 | RNVC: 2

19 Dec 1996

5120-12-381-5343
Swivel Knob Jeweler's Screwdriver

123815343
24035850: RNCC: 3 | RNVC: 2
4007157317582: RNCC: 5 | RNVC: 2

1 Mar 2010

5120-12-305-8122
Spanner Wrench

123058122
0376490: RNCC: 3 | RNVC: 2
0376490: RNCC: 5 | RNVC: 2

17 Dec 1985

5120-12-356-9302
Spanner Wrench

123569302
DIN1810-B120-130: RNCC: 2 | RNVC: 2
40Z-120-130: RNCC: 3 | RNVC: 2
633763: RNCC: 5 | RNVC: 2
97047653: RNCC: 5 | RNVC: 2

17 Apr 2002

5120-12-130-1394
Drive Pin Punch

121301394
NO PRIMARY REF 12-130-1394: RNCC: 3 | RNVC: 2
107529: RNCC: 5 | RNVC: 9
3658-A-2,5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-140-9212
Dorn

121409212
4615A: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-145-8052
Zentriervorrichtung

121458052
837589286300: RNCC: 3 | RNVC: 2
8375892863: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-337-1799
Eindrueckwerkzeug

123371799
8516220: RNCC: 3 | RNVC: 2

30 Jan 1995

5120-12-335-0785
Bearing And Bushing Inserter

123350785
F6271434: RNCC: 3 | RNVC: 2

20 Jul 1994

5120-12-376-0203
Drive Pin Punch

123760203
957311: RNCC: 3 | RNVC: 2

1 Aug 2008

5120-12-317-5032
Lamp Extractor

123175032
06762002: RNCC: 3 | RNVC: 9

13 Apr 1989

5120-12-363-2950
Piston Inserter

123632950
F6780520: RNCC: 3 | RNVC: 2

20 May 2004

5120-12-129-4517

5120-12-162-4675
Spanner Wrench

121624675
4085157: RNCC: 3 | RNVC: 2
776-5: RNCC: 3 | RNVC: 2
FZ4491: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5349
Socket Head Screw Key

121235349
1997Z7-8: RNCC: 3 | RNVC: 2
1010-7-8: RNCC: 3 | RNVC: 2
42796: RNCC: 3 | RNVC: 2
10760ACV-7/8: RNCC: 3 | RNVC: 2
105995: RNCC: 5 | RNVC: 2
13713: RNCC: 5 | RNVC: 2
43550044: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-342-1367
Box Wrench

123421367
8A-2 3/4: RNCC: 3 | RNVC: 2
42410084: RNCC: 5 | RNVC: 2

17 Dec 1996

5120-12-306-9727
Pipe Wrench

123069727
3112254: RNCC: 3 | RNVC: 2

23 Apr 1986

5120-12-178-9642
Tool Handle Wedge

121789642
6798-7: RNCC: 3 | RNVC: 9

28 May 1979

5120-12-139-7592
Mechanical Puller

121397592
3155892133: RNCC: 3 | RNVC: 2
315589213300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-158-8564
Mechanical Puller

121588564
F30272092: RNCC: 3 | RNVC: 2
F362800272092: RNCC: 5 | RNVC: 2
000589793300: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-348-6330
Ratchet Wrench

123486330
31KVR27: RNCC: 3 | RNVC: 2

28 Jul 1999

5120-12-126-4939

5120-12-341-0019
Socket Head Screw Key Set

123410019
160K: RNCC: 3 | RNVC: 2

16 Jul 1996

5120-12-129-3295
Box Wrench

121293295
2W1-4X5-16: RNCC: 3 | RNVC: 2
06800: RNCC: 5 | RNVC: 9
630W1-4X5-16: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-365-6671
Pipe Wrench

123656671
075226: RNCC: 3 | RNVC: 2

24 Jan 2005

5120-12-021-5703

5120-12-194-3032
Mechan Druckstueck

121943032
105-14181W1.01: RNCC: 3 | RNVC: 2
105-14181W1-01: RNCC: 5 | RNVC: 2

20 Oct 1982

5120-12-130-7888
Socket Wrench Socket

121307888
TL5120-0121-150: RNCC: 2 | RNVC: 2
880-18: RNCC: 3 | RNVC: 2
30-18: RNCC: 3 | RNVC: 2
456-18: RNCC: 3 | RNVC: 2
DIN3124-S18X10: RNCC: 5 | RNVC: 1
623466: RNCC: 5 | RNVC: 2
2386110013: RNCC: 5 | RNVC: 2
02110018: RNCC: 5 | RNVC: 2
109303: RNCC: 5 | RNVC: 9
7400SM18: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-151-6513
Abzieh Quertraeger

121516513
23111-7156.07: RNCC: 2 | RNVC: 2
23111-7156.07: RNCC: 3 | RNVC: 2
23111-7156-07: RNCC: 5 | RNVC: 9
23111-7156-07: RNCC: 5 | RNVC: 9
23111-7156.07: RNCC: 5 | RNVC: 9
23111-7156-07: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-133-3549
Socket Wrench Screwdriver Attachment

121333549
8801A-7/32: RNCC: 3 | RNVC: 2
2486120004: RNCC: 5 | RNVC: 2
10190: RNCC: 5 | RNVC: 2
8801A7-32: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-171-7500
Socket Wrench Set

121717500
W326: RNCC: 2 | RNVC: 9
6721N-M: RNCC: 3 | RNVC: 2
6721NM: RNCC: 3 | RNVC: 9
108830: RNCC: 5 | RNVC: 2
5120-00366: RNCC: 6 | RNVC: 9

10 Nov 1977

5120-12-149-5823
Inserted Hammer Face

121495823
05000120001: RNCC: 3 | RNVC: 2
935 4: RNCC: 3 | RNVC: 2
100L GR. 4/35: RNCC: 5 | RNVC: 2
00120: RNCC: 5 | RNVC: 9
200L-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-342-1456
Hand Terminal Crimping Tool

123421456
210783: RNCC: 3 | RNVC: 2

18 Dec 1996

5120-12-133-4659
Ueberlaufbehaelter

121334659
078M00100: RNCC: 3 | RNVC: 2
5185891563: RNCC: 3 | RNVC: 2
518589156300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-363-8864
Bearing And Bushing Inserter

123638864
T670P5001233: RNCC: 3 | RNVC: 2

3 Aug 2004

5120-12-339-4016
Socket Wrench

123394016
12504: RNCC: 3 | RNVC: 2
18100016: RNCC: 5 | RNVC: 2

20 Nov 1995

5120-12-391-0557
Gear Inserter

123910557
F30378391: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-12-358-2507
Screwdriver Bit

123582507
614784075: RNCC: 3 | RNVC: 2
614 784 075: RNCC: 5 | RNVC: 2

1 Oct 2002

5120-12-325-8800
Mechanical Puller

123258800
000589503400: RNCC: 3 | RNVC: 2
20117: RNCC: 3 | RNVC: 2

17 Jul 1991

5120-12-312-1388
Mechanical Puller

123121388
80996066001: RNCC: 3 | RNVC: 2
80.99606.6001: RNCC: 5 | RNVC: 2

26 Nov 1987

5120-12-126-3056
Hand Hammer

121263056
50560-9-0: RNCC: 3 | RNVC: 2
5081ES500: RNCC: 3 | RNVC: 2
574A005B500: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-139-3610
Flat Tip Screwdriver

121393610
GF125247: RNCC: 3 | RNVC: 2
F1311-252470: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-121-5746
Zuggerae Drahtseil

121215746
30270: RNCC: 3 | RNVC: 2
803-005-20: RNCC: 5 | RNVC: 9
30352814900000: RNCC: 5 | RNVC: 9
30352814902000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-326-0171
Retaining Ring Pliers

123260171
000589523700: RNCC: 3 | RNVC: 2
1847-3: RNCC: 3 | RNVC: 2
5374520027: RNCC: 5 | RNVC: 9

30 Jul 1991

5120-12-374-3571
Socket Wrench Socket

123743571
03010023-TCS: RNCC: 3 | RNVC: 2

11 Feb 2008

5120-12-181-3079
Drive Pin Punch

121813079
23305-264100.14.0: RNCC: 2 | RNVC: 2
23305-264100.14.0: RNCC: 3 | RNVC: 2
23305-264100-14-0: RNCC: 5 | RNVC: 2
HT39/6891/01: RNCC: 5 | RNVC: 9
23305-264100.14.0: RNCC: 5 | RNVC: 9
23305-264100-14-0: RNCC: 5 | RNVC: 9

14 Nov 1979

5120-12-145-6824
Pedal Adjustment Tool Compressor

121456824
23176-264020-00-0: RNCC: 2 | RNVC: 2
23176-264020.00.0: RNCC: 2 | RNVC: 2
23176-264020-00-0: RNCC: 5 | RNVC: 2
23176-264020.00.0: RNCC: 5 | RNVC: 2
23176-264020-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-338-6628
Torque Wrench

123386628
730R/10: RNCC: 3 | RNVC: 2
96502010: RNCC: 5 | RNVC: 2

10 Aug 1995

5120-12-194-4112
Drive Pin Punch Set

121944112
112: RNCC: 3 | RNVC: 2
748200-8: RNCC: 3 | RNVC: 2
3659/8T: RNCC: 3 | RNVC: 2
1472573: RNCC: 5 | RNVC: 2
3659-8T: RNCC: 5 | RNVC: 2
147257: RNCC: 5 | RNVC: 9
74820: RNCC: 5 | RNVC: 9

3 Nov 1982

5120-12-135-0210
Socket Wrench

121350210
NO PRIMARY REF 12-135-0210: RNCC: 3 | RNVC: 2
105399: RNCC: 5 | RNVC: 9
1945NKBZ1-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-341-6186
Hand Sheet Metal Seamer

123416186
194B120: RNCC: 3 | RNVC: 2
19420120: RNCC: 5 | RNVC: 2

2 Oct 1996

5120-12-700-4266
Hand Leather Creaser

127004266
FALZBEIN NVA: RNCC: 2 | RNVC: 2

12 May 1992

5120-12-195-0845
Mechanical Puller

121950845
0851 8478: RNCC: 3 | RNVC: 2
8518478: RNCC: 5 | RNVC: 2

11 Jan 1983

5120-12-041-5650

5120-12-358-4884
Hand Tube Bender

123584884
240018: RNCC: 3 | RNVC: 2

21 Oct 2002

5120-12-340-7086
Bearing And Bushing Inserter And Remover

123407086
2802 4507: RNCC: 3 | RNVC: 2

29 May 1996

5120-12-372-8578
Switch Adjusting Tool

123728578
DF Z00 409 AA: RNCC: 2 | RNVC: 2
DF Z00 409 AA: RNCC: 3 | RNVC: 2

29 Aug 2007

5120-12-134-2724
Auf U. A Haltering

121342724
007M00505: RNCC: 3 | RNVC: 2
007M00705: RNCC: 5 | RNVC: 2
VM68674-3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-170-2620

5120-12-163-3270
Dorn

121633270
92010393: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-390-0462
Door Lock Open Tool

123900462
KV2005: RNCC: 3 | RNVC: 2

27 Sep 2012

5120-12-389-3032
Bearing And Bushing Inserter

123893032
631589203500: RNCC: 3 | RNVC: 2
631589203500: RNCC: 5 | RNVC: 2

19 Jun 2012

5120-12-090-1343

5120-12-127-1850
Socket Wrench Handle

121271850
NO PRIMARY REF 12-127-1850: RNCC: 3 | RNVC: 2
238872: RNCC: 5 | RNVC: 9
32284: RNCC: 5 | RNVC: 9
32284: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-0766
Hand Terminal Crimping Tool

121990766
S9: RNCC: 3 | RNVC: 2
S9: RNCC: 5 | RNVC: 9

23 Mar 1984

5120-12-142-0254
Mechanisch Traverse

121420254
501: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-199-2520
Socket Wrench Socket

121992520
DIN3124-S13X6,3L: RNCC: 2 | RNVC: 2
1455-T13: RNCC: 3 | RNVC: 2
20L-13: RNCC: 3 | RNVC: 2
40L-13: RNCC: 3 | RNVC: 2
00.44.17.52: RNCC: 5 | RNVC: 2
6800M13: RNCC: 5 | RNVC: 9

6 Apr 1984

5120-12-387-2762
Socket Wrench

123872762
S3157-A-26.3: RNCC: 3 | RNVC: 2

23 Nov 2011

5120-12-337-3694
Hole Sheet Metal Holder

123373694
218-2072KU-26: RNCC: 3 | RNVC: 2
2072KU-26: RNCC: 5 | RNVC: 2

21 Feb 1995

5120-12-325-0957
Dreh Haltewerkzeug

123250957
62395401: RNCC: 3 | RNVC: 2
62395401-503: RNCC: 5 | RNVC: 2
623.954.01: RNCC: 5 | RNVC: 2
62395401-50: RNCC: 5 | RNVC: 2
6.11.082: RNCC: 5 | RNVC: 9
6.11.082.00: RNCC: 5 | RNVC: 9

30 Apr 1991

5120-12-190-3226
Hand Tube Flaring Tool

121903226
20-P1E-P17418-M27420: RNCC: 3 | RNVC: 2
20P1EP17418M27420: RNCC: 5 | RNVC: 2

19 Nov 1981

5120-12-340-4486
Socket Head Screw Key

123404486
05138261001: RNCC: 3 | RNVC: 2
141598: RNCC: 3 | RNVC: 2
TX15S: RNCC: 5 | RNVC: 2
367-BO-TX15X80: RNCC: 5 | RNVC: 2
138261: RNCC: 5 | RNVC: 9
367-BOTX15: RNCC: 5 | RNVC: 9

16 Apr 1996

5120-12-372-5833
Tap Extractor

123725833
33-8B: RNCC: 3 | RNVC: 2
01.98.86.01: RNCC: 5 | RNVC: 2

1 Aug 2007

5120-12-330-4413
Hydraulic Jack Handle

123304413
241901: RNCC: 3 | RNVC: 2

15 Dec 1992

5120-12-186-7597
Bearing And Bushing Inserter

121867597
05000261136: RNCC: 3 | RNVC: 2

2 Feb 1981

5120-12-090-1529

5120-12-371-1744
Torque Wrench Adapter

123711744
58611024-TCS: RNCC: 3 | RNVC: 2

23 Feb 2007

5120-12-385-4458
Einstel Schluessel

123854458
10120653-BUND: RNCC: 3 | RNVC: 2

6 Jun 2011

5120-12-365-2952
Bearing And Bushing Inserter

123652952
135893: RNCC: 3 | RNVC: 2

16 Dec 2004

5120-12-354-0318
Seal Inserter

123540318
745589011500: RNCC: 3 | RNVC: 2
745 589 01 15 00: RNCC: 5 | RNVC: 2

29 May 2001

5120-12-373-9223
Hand Terminal Crimping Tool

123739223
N00001A0002: RNCC: 3 | RNVC: 2

19 Dec 2007

5120-12-362-9881
Bearing And Bushing Inserter And Remover

123629881
T631P3005051: RNCC: 3 | RNVC: 2

22 Apr 2004

5120-12-329-5396
Socket Wrench Socket

123295396
58918420: RNCC: 3 | RNVC: 2
52565420: RNCC: 5 | RNVC: 9

28 Aug 1992

5120-12-365-7603
Torque Wrench Adapter

123657603
58211009-TCS: RNCC: 3 | RNVC: 2

1 Feb 2005

5120-12-390-3967
Gear Inserter

123903967
F0095798: RNCC: 3 | RNVC: 2

8 Nov 2012

5120-12-333-7411
Mechanical Puller

123337411
105-31501W6: RNCC: 3 | RNVC: 2

28 Jan 1994

5120-12-127-9054
Mechanical Puller

121279054
WU71: RNCC: 3 | RNVC: 2
WU71: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-196-8021
Cross Tip Screwdriver

121968021
8080-8: RNCC: 3 | RNVC: 2
4736-8: RNCC: 3 | RNVC: 2
159344: RNCC: 5 | RNVC: 2
1593445: RNCC: 5 | RNVC: 2

17 Aug 1983

5120-12-390-6124
Torque Screwdriver

123906124
775/3: RNCC: 3 | RNVC: 2
4018754141623: RNCC: 5 | RNVC: 2
7113145: RNCC: 5 | RNVC: 2
51060003: RNCC: 5 | RNVC: 2

28 Nov 2012

5120-12-323-0620
Hand Manhole Cover Hook

123230620
01017 G-R: RNCC: 3 | RNVC: 2

22 Oct 1990

5120-12-330-7023
Open End Wrench

123307023
2500179-992330.017.0: RNCC: 2 | RNVC: 2
2500179-992330.017.0: RNCC: 3 | RNVC: 2

28 Jan 1993

5120-12-302-5723
Hand Beading Tool

123025723
105-40001W1: RNCC: 3 | RNVC: 2

14 Jan 1985

5120-12-127-4163

5120-12-181-9122
Mechanical Puller

121819122
327589023500: RNCC: 3 | RNVC: 9

21 Dec 1979

5120-12-332-7075
Aufdrueckwerkzeug

123327075
P-0-875: RNCC: 3 | RNVC: 2

9 Sep 1993

5120-12-333-5684
Drive Pin Punch

123335684
076-240080-910-0: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-12-365-5398
Flat Tip Screwdriver

123655398
47281040-TCS: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-12-385-3917
Socket Head Screw Key

123853917
10092567: RNCC: 3 | RNVC: 2
10092567: RNCC: 5 | RNVC: 2

30 May 2011

5120-12-363-2192
Montierdorn

123632192
F30377888: RNCC: 3 | RNVC: 2

13 May 2004

5120-12-150-4480
Face Spanner Wrench Socket

121504480
838589020700: RNCC: 3 | RNVC: 2
8385890207: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-317-4334
Cross Tip Screwdriver

123174334
08720: RNCC: 3 | RNVC: 9

6 Apr 1989

5120-12-010-9680

5120-12-140-1148

5120-12-368-8523
Pliers

123688523
75-12: RNCC: 3 | RNVC: 2
00.39.70.90: RNCC: 5 | RNVC: 2

28 Apr 2006

5120-12-309-7631
Offset Screwdriver

123097631
MV307-0000-0005: RNCC: 3 | RNVC: 2

24 Feb 1987

5120-12-155-8262
Socket Wrench Socket Set

121558262
NO PRIMARY REF 12-155-8262: RNCC: 3 | RNVC: 2
7820M: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-339-2651
Seal Inserter

123392651
5870 051 023: RNCC: 3 | RNVC: 2
141.5870.051023: RNCC: 5 | RNVC: 2

31 Oct 1995

5120-12-139-3091
Kolbenbo Laeppholz

121393091
8205893563: RNCC: 3 | RNVC: 2
043M00200: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-183-4105
Dapping Punch

121834105
4190425: RNCC: 3 | RNVC: 2

15 Apr 1980

5120-12-307-1067
Torque Wrench

123071067
NO PRIMARY REF 12-307-1067: RNCC: 3 | RNVC: 2
714 71 22: RNCC: 5 | RNVC: 2
0278: RNCC: 5 | RNVC: 2
730AR/10: RNCC: 5 | RNVC: 9
96506010: RNCC: 5 | RNVC: 9

9 May 1986

5120-12-152-0737
Kraf Auflagebuegel

121520737
23111-7184.00: RNCC: 2 | RNVC: 2
23111-7184.00: RNCC: 3 | RNVC: 2
23111-7184.00: RNCC: 5 | RNVC: 9
23111-7184-00: RNCC: 5 | RNVC: 9
23111-7184-00: RNCC: 5 | RNVC: 9
23111-7184-00: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-151-6720
Socket Wrench Socket

121516720
NM293-12: RNCC: 3 | RNVC: 2
31-353-016-4: RNCC: 5 | RNVC: 2
NM293-12: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-9720
Socket Head Screw Key

123689720
598101-990000.025.0: RNCC: 3 | RNVC: 2
1010-24-SONDERLAENGE: RNCC: 5 | RNVC: 2

9 May 2006

5120-12-179-5277
Gum Dreidorn- Zange

121795277
NA-8/10: RNCC: 3 | RNVC: 2
6174: RNCC: 3 | RNVC: 9

4 Jul 1979

5120-12-189-2367
Socket Wrench

121892367
DIN87310-12: RNCC: 2 | RNVC: 2

14 Sep 1981

5120-12-178-3272
Socket Wrench Set

121783272
6821NZ: RNCC: 3 | RNVC: 2
1089269: RNCC: 5 | RNVC: 2
108926: RNCC: 5 | RNVC: 9
6821N-Z: RNCC: 5 | RNVC: 9
X807: RNCC: 5 | RNVC: 9
6821 N-Z: RNCC: 5 | RNVC: 9
5120-00076: RNCC: 6 | RNVC: 9

12 Apr 1979

5120-12-371-6309
Socket Head Screw Key

123716309
625400-TX25: RNCC: 3 | RNVC: 2

27 Apr 2007

5120-12-390-0113
Ratchet Wrench

123900113
23215: RNCC: 3 | RNVC: 2

25 Sep 2012

5120-12-390-3164
Mechanical Puller

123903164
F6270936: RNCC: 3 | RNVC: 2

29 Oct 2012

5120-12-133-3209
Splicing Sleeve Compressing Tool

121333209
05525: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-5970

5120-12-133-0602
Socket Wrench

121330602
DIN659SW95: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-091-7162

5120-12-183-5477
Socket Wrench

121835477
1000042-197000: RNCC: 3 | RNVC: 2
MAGERD 7646: RNCC: 5 | RNVC: 9

26 Apr 1980

5120-12-181-8132
Druckstempel

121818132
VW412: RNCC: 3 | RNVC: 9

17 Dec 1979

5120-12-318-2834
Vise Jaw Caps

123182834
10846: RNCC: 3 | RNVC: 2
10846: RNCC: 5 | RNVC: 9

26 Jun 1989

5120-12-331-9885
Brake Shoe Adjusting Tool

123319885
2582: RNCC: 3 | RNVC: 2
5732720001: RNCC: 5 | RNVC: 2

13 Jul 1993

5120-12-315-2405
Bearing And Bushing Remover

123152405
0853 1238: RNCC: 3 | RNVC: 2
8531238: RNCC: 5 | RNVC: 2

6 Oct 1988

5120-12-371-3514
Box Wrench Set

123713514
120S 12M: RNCC: 3 | RNVC: 2
00.27.77.61: RNCC: 5 | RNVC: 2

19 Mar 2007

5120-12-315-3880
Face Spanner Wrench Socket

123153880
503653: RNCC: 3 | RNVC: 2

19 Oct 1988

5120-12-338-3612
Open End Wrench

123383612
8310344018: RNCC: 3 | RNVC: 2

27 Jun 1995

5120-12-130-9081
Spanner Wrench

121309081
5078289: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-374-0245
Spanner Wrench

123740245
314949: RNCC: 3 | RNVC: 2

10 Jan 2008

5120-12-070-0219

5120-12-174-7574
Spanner Wrench

121747574
105-45041W3: RNCC: 3 | RNVC: 2

27 Jul 1978

5120-12-373-4294
Seal Installation Tool

123734294
1X53176711: RNCC: 3 | RNVC: 2
1X53176711: RNCC: 5 | RNVC: 2

31 Oct 2007

5120-12-165-5344
Hand Tube Bender

121655344
2.5186: RNCC: 3 | RNVC: 2
107998: RNCC: 5 | RNVC: 9
R4450M16: RNCC: 5 | RNVC: 9

25 May 1976

5120-12-343-3270
Socket Wrench Socket

123433270
433/1: RNCC: 3 | RNVC: 2
96122701: RNCC: 5 | RNVC: 2

5 Jun 1997

5120-12-130-7901
Socket Wrench Socket

121307901
456A5-8: RNCC: 3 | RNVC: 2
02510036: RNCC: 5 | RNVC: 2
7400SZ5-8: RNCC: 5 | RNVC: 9
109316: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-322-6695
Socket Wrench Screwdriver Attachment

123226695
2300223-264100.05.0: RNCC: 2 | RNVC: 2
2300223-264100.05.0: RNCC: 3 | RNVC: 2

11 Sep 1990

5120-12-023-1414

5120-12-338-3926
Torque Wrench

123383926
6003CT: RNCC: 3 | RNVC: 2
6260420017: RNCC: 5 | RNVC: 2

3 Jul 1995

5120-12-129-6006

5120-12-358-7167
Mechanical Puller

123587167
80996280085: RNCC: 3 | RNVC: 2
80.99628.0085: RNCC: 5 | RNVC: 2

7 Nov 2002

5120-12-194-3033
Mechan Druckstueck

121943033
105-31729W1.03: RNCC: 3 | RNVC: 2
105-31729W1-03: RNCC: 5 | RNVC: 2

20 Oct 1982

5120-12-193-6660
Werkzeugausstattung

121936660
C74451-Z1073-U58: RNCC: 3 | RNVC: 2

18 Aug 1982

5120-12-151-9800
Socket Head Screw Key

121519800
NO PRIMARY REF 12-151-9800: RNCC: 3 | RNVC: 2
132083: RNCC: 5 | RNVC: 9
1996-133: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-387-0035
Socket Wrench Socket

123870035
80996030343: RNCC: 3 | RNVC: 2
80.99603-0343: RNCC: 5 | RNVC: 2

25 Oct 2011

5120-12-345-5148
Inspection Mirror

123455148
12921-40: RNCC: 3 | RNVC: 2
77 40 20 40: RNCC: 5 | RNVC: 2

26 Mar 1998

5120-12-382-1991
Retaining Ring Pliers

123821991
EJ 3220: RNCC: 3 | RNVC: 2
01.57.88.74: RNCC: 5 | RNVC: 2

20 May 2010

5120-12-134-2642
Ko Fuehrungsbolzen

121342642
010M02900: RNCC: 3 | RNVC: 2
VM56028: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-383-6929
Mechanical Puller Step Plate

123836929
1X56.095.059: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-12-308-5534
Bearing And Bushing Inserter

123085534
99374374: RNCC: 3 | RNVC: 2
416580: RNCC: 5 | RNVC: 9
374374: RNCC: 5 | RNVC: 9

22 Oct 1986

5120-12-197-5975
Combination Box And Open End Wrench

121975975
087352: RNCC: 3 | RNVC: 2

7 Nov 1983

5120-12-347-1877
Montierdorn

123471877
0852 5106: RNCC: 3 | RNVC: 2

10 Nov 1998

5120-12-358-4058
Crimping Tool Die

123584058
974940: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-12-335-3151
Spanner Wrench

123353151
0852 0086: RNCC: 3 | RNVC: 2
8520086: RNCC: 5 | RNVC: 2

9 Aug 1994

5120-12-303-9332
Box Wrench

123039332
2802 7133: RNCC: 3 | RNVC: 2
GH56-1-5323-1: RNCC: 5 | RNVC: 9
GH56-1-5323-1: RNCC: 5 | RNVC: 9
GH56-1-5323-1: RNCC: 5 | RNVC: 9
2802 7133: RNCC: 5 | RNVC: 9
1290 0052: RNCC: 5 | RNVC: 9

22 May 1985

5120-12-389-2148
Spanner Wrench

123892148
9997036-990301.000.0: RNCC: 3 | RNVC: 2

6 Jun 2012

5120-12-190-4620
Driftpin

121904620
6008R-2500.01.0: RNCC: 3 | RNVC: 2

30 Nov 1981

5120-12-023-1395

5120-12-186-7293
Socket Wrench Socket

121867293
99366603: RNCC: 3 | RNVC: 2
430820: RNCC: 5 | RNVC: 9
430820: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-377-5315
Piston Ring Expander

123775315
038967: RNCC: 3 | RNVC: 2

22 Jan 2009

5120-12-392-1771
Mecha Ejector Tool

123921771
96746230: RNCC: 3 | RNVC: 2

13 May 2013

5120-12-134-2732
Mechanical Puller

121342732
002M02700: RNCC: 3 | RNVC: 2
VM65372: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-377-6790
Socket Wrench

123776790
9830011200: RNCC: 3 | RNVC: 2

3 Feb 2009

5120-12-139-3130

5120-12-364-3136
Socket Wrench Socket

123643136
01020045-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-139-5760
Socket Wrench

121395760
028M00300: RNCC: 3 | RNVC: 2
5185890308: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-388-7635
Ratchet Wrench

123887635
522.3236: RNCC: 3 | RNVC: 2

19 Apr 2012

5120-12-091-2900

5120-12-168-5761
Spanner Wrench

121685761
0273A14: RNCC: 3 | RNVC: 2

23 Mar 1977

5120-12-342-6603
Crimping Tool Die

123426603
210795: RNCC: 3 | RNVC: 2

12 Mar 1997

5120-12-129-4515
Retaining Ring Pliers

121294515
2465: RNCC: 3 | RNVC: 2
573K602: RNCC: 5 | RNVC: 2
106356: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-370-0934
Cross Tip Screwdriver

123700934
05008752001: RNCC: 3 | RNVC: 2
08.06502-4200: RNCC: 5 | RNVC: 2
08065024200: RNCC: 5 | RNVC: 2
350SK-PH2: RNCC: 5 | RNVC: 2
667700-2: RNCC: 5 | RNVC: 2
105012: RNCC: 5 | RNVC: 9
550SPH-2X100: RNCC: 5 | RNVC: 9

19 Sep 2006

5120-12-365-9190
Socket Wrench

123659190
T4840X 50: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-369-7407
Dapping Punch

123697407
904589031500: RNCC: 3 | RNVC: 2
7083675: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-319-3634
Mechanical Puller Attachment

123193634
99346221: RNCC: 3 | RNVC: 2

26 Sep 1989

5120-12-149-6905
Stoeszelklemmer

121496905
2941: RNCC: 3 | RNVC: 2
1687953010: RNCC: 5 | RNVC: 2
EFEP91: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-185-6668
Face Spanner Wrench Socket

121856668
4900059-721100-000-0: RNCC: 3 | RNVC: 2
4900059-721100.000.0: RNCC: 3 | RNVC: 2
721100-000-0: RNCC: 5 | RNVC: 2

23 Oct 1980

5120-12-306-8643
Mechanical Puller

123068643
8470052: RNCC: 3 | RNVC: 2
2-8206-884: RNCC: 5 | RNVC: 2
8206884: RNCC: 5 | RNVC: 2

11 Apr 1986

5120-12-151-8444

5120-12-344-8985
Mechanical Puller

123448985
272.401327GZ: RNCC: 3 | RNVC: 2

8 Jan 1998

5120-12-368-2605
Combination Box And Open End Wrench

123682605
40483535-TCS: RNCC: 3 | RNVC: 2

18 Jan 2006

5120-12-384-7379
Blacksmiths' Tongs

123847379
51.000.021: RNCC: 3 | RNVC: 2
51.000.021: RNCC: 5 | RNVC: 2

24 Mar 2011

5120-12-157-6774
Kabelschuhh Matrize

121576774
B95WHK5: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-357-7255
Seal Inserter

123577255
9249984000: RNCC: 3 | RNVC: 2

16 Jul 2002

5120-12-171-9959
Socket Wrench Extension

121719959
6361: RNCC: 3 | RNVC: 2
108777: RNCC: 5 | RNVC: 2

8 Dec 1977

5120-12-346-5803
Montierdorn

123465803
41121-T602: RNCC: 3 | RNVC: 2

12 Aug 1998

5120-12-182-2051
Kolben Spannband

121822051
2523-83: RNCC: 3 | RNVC: 9
VW123B: RNCC: 3 | RNVC: 9

18 Jan 1980

5120-12-126-5983

5120-12-304-5225
Ratchet Wrench

123045225
31K10: RNCC: 3 | RNVC: 2
624322: RNCC: 5 | RNVC: 2

26 Jul 1985

5120-12-339-1131
Seal Inserter

123391131
5870 051 025: RNCC: 3 | RNVC: 2
141.5870.051025: RNCC: 5 | RNVC: 2

11 Oct 1995

5120-12-359-6700
Eindrueckwerkzeugte

123596700
T622P3008101: RNCC: 3 | RNVC: 2

26 Feb 2003

5120-12-194-3553
Pliers

121943553
29: RNCC: 3 | RNVC: 2
05L7400: RNCC: 5 | RNVC: 2

26 Oct 1982

5120-12-196-0170
Socket Head Screw Key

121960170
334-6,0X450: RNCC: 3 | RNVC: 2

16 May 1983

5120-12-380-8708
Socket Wrench Handle

123808708
2300519-970255.000.0: RNCC: 3 | RNVC: 2

7 Dec 2009

5120-12-362-7202
Screwdriver Bit

123627202
8507-PZ3: RNCC: 3 | RNVC: 2

23 Mar 2004

5120-12-365-1141
Bearing And Bushing Inserter

123651141
H14831010: RNCC: 3 | RNVC: 2

30 Nov 2004

5120-12-024-4797

5120-12-120-5848

5120-12-341-1496
Montierdorn

123411496
363608: RNCC: 3 | RNVC: 2

1 Aug 1996

5120-12-354-0317
Seal Inserter

123540317
740589001500: RNCC: 3 | RNVC: 2

29 May 2001

5120-12-163-6648
Montagevorrichtung

121636648
26-21C1615G01: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-174-9821
Dorn

121749821
3S55050-0000: RNCC: 3 | RNVC: 2

15 Aug 1978

5120-12-005-1680

5120-12-192-0311
Spanner Wrench

121920311
F1149001-0065: RNCC: 3 | RNVC: 2

22 Mar 1982

5120-12-327-8469
Socket Head Screw Socket Wrench Attachment Wrench Set

123278469
NO PRIMARY REF 12-327-8469: RNCC: 3 | RNVC: 2
160334: RNCC: 5 | RNVC: 9
7466: RNCC: 5 | RNVC: 9

12 Mar 1992

5120-12-183-9840
Screwdriver Bit

121839840
05073165001: RNCC: 3 | RNVC: 2
2230S-14: RNCC: 3 | RNVC: 9
2230S-14X50: RNCC: 5 | RNVC: 2
2230-14: RNCC: 5 | RNVC: 9
73165: RNCC: 5 | RNVC: 9

7 Jun 1980

5120-12-190-6052
Schluessel

121906052
1400967: RNCC: 3 | RNVC: 2
1400967-4: RNCC: 5 | RNVC: 9
1400967/4: RNCC: 5 | RNVC: 9

7 Dec 1981

5120-12-137-8809

5120-12-151-6546
Montagevorrichtung

121516546
2B2001U1V35: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-321-5352
Spanner Wrench

123215352
VG95922ST: RNCC: 2 | RNVC: 2

29 May 1990

5120-12-384-0416
Mechanical Puller

123840416
7092654: RNCC: 3 | RNVC: 2

13 Jan 2011

5120-12-178-3101
Socket Head Screw Key

121783101
1839501: RNCC: 3 | RNVC: 2
0043360: RNCC: 3 | RNVC: 2

12 Apr 1979

5120-12-364-3148
Socket Wrench Socket

123643148
01140006-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-376-5343
Socket Head Screw Key

123765343
43715: RNCC: 3 | RNVC: 2

14 Oct 2008

5120-12-139-3006
Dorn

121393006
8205890339: RNCC: 3 | RNVC: 2
016M01800: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-3119
Beha Ueberlaufrohr

121393119
5185890190: RNCC: 3 | RNVC: 2
075M01600: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-362-4250
Mechanical Puller

123624250
1X53 173 138: RNCC: 3 | RNVC: 2
T632G30T0002: RNCC: 5 | RNVC: 2

19 Feb 2004

5120-12-131-7153
Abziehvorrichtung

121317153
0005891433: RNCC: 3 | RNVC: 2
0005891433: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-190-5612
Gegenhalter

121905612
416010: RNCC: 3 | RNVC: 2

2 Dec 1981

5120-12-365-7822
Craftsman's Tweezers

123657822
T2302: RNCC: 3 | RNVC: 2

2 Feb 2005

5120-12-325-6661
Spanner Wrench

123256661
5105.020.09.01: RNCC: 3 | RNVC: 2
7820353142: RNCC: 5 | RNVC: 2
78203 53142: RNCC: 5 | RNVC: 9

27 Jun 1991

5120-12-020-5414

5120-12-333-7525
Mechanical Puller Forcing Screw

123337525
26-21C1050 G002-P3: RNCC: 3 | RNVC: 2
26-21C1050G002P3: RNCC: 5 | RNVC: 2

1 Feb 1994

5120-12-305-2542
Rohrbieger Dorn

123052542
5-1/20-022-000-21438: RNCC: 3 | RNVC: 2

15 Oct 1985

5120-12-146-7573
Aufdrueck- Huelse

121467573
02063: RNCC: 3 | RNVC: 2
25704-360400.05.0: RNCC: 3 | RNVC: 2
25704-360400-05-0: RNCC: 5 | RNVC: 2
02063: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-311-1631
Socket Wrench

123111631
C 5707 256: RNCC: 3 | RNVC: 2
C 5707 256: RNCC: 3 | RNVC: 2
6-598-00-021: RNCC: 3 | RNVC: 2
C5707256: RNCC: 5 | RNVC: 2
C5707256: RNCC: 5 | RNVC: 2

3 Aug 1987

5120-12-173-7406
Drive Pin Punch

121737406
3659-1-9: RNCC: 3 | RNVC: 2
159735: RNCC: 5 | RNVC: 2

5 May 1978

5120-12-363-8160
Bearing And Bushing Inserter And Remover

123638160
T670P5001240: RNCC: 3 | RNVC: 2

28 Jul 2004

5120-12-365-9732
Flat Tip Screwdriver

123659732
47601006-TCS: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-12-312-8839
Hand Hammer

123128839
5140.C-2: RNCC: 3 | RNVC: 2
55813-3-0: RNCC: 5 | RNVC: 2

16 Feb 1988

5120-12-370-4294
Socket Wrench Screwdriver Attachment Set

123704294
54TXB/9: RNCC: 3 | RNVC: 2
96031007: RNCC: 5 | RNVC: 2

6 Nov 2006

5120-12-168-6937
Socket Head Screw Key Set

121686937
1997ZB11T: RNCC: 3 | RNVC: 9
106015: RNCC: 5 | RNVC: 2

28 Mar 1977

5120-12-368-1986
Socket Wrench Socket

123681986
01530012-TCS: RNCC: 3 | RNVC: 2

5 Jan 2006

5120-12-194-7956
Socket Wrench Crowfoot Attachment

121947956
F30278532: RNCC: 3 | RNVC: 2
F362110278532: RNCC: 5 | RNVC: 2

8 Dec 1982

5120-12-312-0252
Hand Hammer

123120252
1000042-193648: RNCC: 3 | RNVC: 2

11 Nov 1987

5120-12-330-8568
Dreh Winkelscheibe

123308568
0524062: RNCC: 3 | RNVC: 2

17 Feb 1993

5120-12-141-9791
Open End Wrench

121419791
571A203B1 7-16IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-335-2521
Electrical Contact Inserter And Remover

123352521
NO PRIMARY REF 12-335-2521: RNCC: 3 | RNVC: 2
282891: RNCC: 5 | RNVC: 9

1 Aug 1994

5120-12-390-3046
Socket Head Screw Key

123903046
7000-500-040: RNCC: 3 | RNVC: 2

29 Oct 2012

5120-12-305-0106
Socket Wrench

123050106
SWN 06.0354/17: RNCC: 3 | RNVC: 2

17 Sep 1985

5120-12-153-5003
Halter

121535003
CH1313-1-1: RNCC: 3 | RNVC: 2
1205 1863: RNCC: 3 | RNVC: 2
12051863: RNCC: 5 | RNVC: 2
3.415.0.018.039.6: RNCC: 5 | RNVC: 2
3-415-0-018-039-6: RNCC: 5 | RNVC: 9
6-0888-01-9-0301: RNCC: 5 | RNVC: 9
CH1313-1-1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-8173
Pliers

123688173
2430 G-140 IP: RNCC: 3 | RNVC: 2
00.14.76.21: RNCC: 5 | RNVC: 2
0102143: RNCC: 5 | RNVC: 2

25 Apr 2006

5120-12-327-8470
Flat Tip Screwdriver

123278470
8000-0,4X2,5X60: RNCC: 3 | RNVC: 2
811-2,5-60: RNCC: 3 | RNVC: 2
05110000001: RNCC: 3 | RNVC: 2
110000: RNCC: 3 | RNVC: 9
335-0,4X2,5X60: RNCC: 5 | RNVC: 2
179349: RNCC: 5 | RNVC: 2
8000-0-4X2-5X60: RNCC: 5 | RNVC: 9

12 Mar 1992

5120-12-381-7693
Seal Remover

123817693
225265: RNCC: 3 | RNVC: 2

29 Mar 2010

5120-12-139-8570
Abziehvorrichtung

121398570
3125890333: RNCC: 3 | RNVC: 2
312589033300: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-357-7612
Electrical Contact Inserter And Remover

123577612
5300.780.008.000: RNCC: 3 | RNVC: 2

19 Jul 2002

5120-12-361-1516
Zy Montierwerkzeug

123611516
5309308: RNCC: 3 | RNVC: 2
6503.201.10.30.000: RNCC: 5 | RNVC: 2

28 Aug 2003

5120-12-303-4254
Hand Hammer

123034254
51196350: RNCC: 3 | RNVC: 9

21 Mar 1985

5120-12-183-9837
Screwdriver Bit

121839837
05073105001: RNCC: 3 | RNVC: 2
2220GR3: RNCC: 3 | RNVC: 9
2220S-PH3X45: RNCC: 5 | RNVC: 2

7 Jun 1980

5120-12-364-6801
Socket Wrench Socket

123646801
03020015-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-155-8786
Zeiger Abheber

121558786
4263001: RNCC: 3 | RNVC: 2
3611: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-359-3254
Spanner Wrench

123593254
01000007: RNCC: 3 | RNVC: 2
IF-3000-110-1: RNCC: 5 | RNVC: 2

23 Jan 2003

5120-12-393-6895
Gear Inserter

123936895
A-0261-004: RNCC: 3 | RNVC: 2

2 Oct 2013

5120-12-123-5425
Box Wrench

121235425
DIN837-B32X36: RNCC: 2 | RNVC: 2
085145: RNCC: 3 | RNVC: 2
4-32X36: RNCC: 3 | RNVC: 2
32X36DIN837: RNCC: 5 | RNVC: 2
DIN837-32X36: RNCC: 5 | RNVC: 2
TVA5120-2-264-14H-32X36MM: RNCC: 5 | RNVC: 2
237256: RNCC: 5 | RNVC: 9
4-32X36: RNCC: 5 | RNVC: 9
4-32X36: RNCC: 5 | RNVC: 9
32X36DIN837GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-305-4613
Blacksmiths' Tongs

123054613
6171.01-600: RNCC: 3 | RNVC: 2
51315-6-0: RNCC: 5 | RNVC: 2

8 Nov 1985

5120-12-358-3635
Ratchet Wrench

123583635
71425119: RNCC: 3 | RNVC: 2

14 Oct 2002

5120-12-333-6699
Hand Blind Riveter

123336699
09171: RNCC: 3 | RNVC: 2
948917: RNCC: 3 | RNVC: 2
917 1: RNCC: 5 | RNVC: 2

20 Jan 1994

5120-12-316-9119
Torque Wrench Adapter

123169119
21/5-41: RNCC: 3 | RNVC: 2

22 Feb 1989

5120-12-364-6791
Socket Wrench Socket

123646791
03010019-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-133-4532

5120-12-367-1085
Montierwerk Huelse

123671085
0907891: RNCC: 3 | RNVC: 2

11 Jul 2005

5120-12-172-7939
Vorstech- Ahle

5120-12-123-5613

5120-12-346-2272
Electrical Contact Inserter

123462272
280-433: RNCC: 3 | RNVC: 2

30 Jun 1998

5120-12-344-1825
Machinist's Vise

123441825
HEUERFRONT100MMDREHBAR: RNCC: 3 | RNVC: 2
HEUERFRONT100MMDREHBAR: RNCC: 5 | RNVC: 9

23 Sep 1997

5120-12-141-9650
Slip Joint Pliers

121419650
NO PRIMARY REF 12-141-9650: RNCC: 3 | RNVC: 2
573D002: RNCC: 5 | RNVC: 2
106499: RNCC: 5 | RNVC: 9
2566A: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-6941
Box Wrench

121816941
110310: RNCC: 3 | RNVC: 2
89231025: RNCC: 5 | RNVC: 2
89415107: RNCC: 5 | RNVC: 2
698-725-0000: RNCC: 5 | RNVC: 2
191207A: RNCC: 5 | RNVC: 9

10 Dec 1979

5120-12-126-2580

5120-12-385-3319
Solid Center Punch

123853319
51.000.080: RNCC: 3 | RNVC: 2
53.000.061: RNCC: 3 | RNVC: 2
51.000.080: RNCC: 5 | RNVC: 2
53.000.061: RNCC: 5 | RNVC: 2

24 May 2011

5120-12-385-6098
Pull And Press Tool

123856098
F6379012: RNCC: 3 | RNVC: 2

21 Jun 2011

5120-12-139-7642
Tragseil

121397642
3125890731: RNCC: 3 | RNVC: 2
312589073100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-140-9825
Schraube

121409825
527: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-092-3877

5120-12-324-4463
Ratchet Wrench

123244463
349309: RNCC: 3 | RNVC: 2

18 Feb 1991

5120-12-358-1994
Screwdriver Bit Set And Handle

123581994
61380: RNCC: 3 | RNVC: 2
613 80: RNCC: 5 | RNVC: 2

25 Sep 2002

5120-12-340-3454
Socket Wrench Set

123403454
STECKSCHLUESSEL: RNCC: 3 | RNVC: 2

28 Mar 1996

5120-12-133-4805
Socket Head Screw Key Set

121334805
1997Z9T: RNCC: 3 | RNVC: 2
105998: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-331-8903
Spanner Wrench

123318903
1590: RNCC: 3 | RNVC: 2

1 Jul 1993

5120-12-333-5734
Mechanical Puller Attachment

123335734
63-638: RNCC: 3 | RNVC: 2
000589413400: RNCC: 3 | RNVC: 2
000589413400: RNCC: 5 | RNVC: 9

6 Jan 1994

5120-12-123-5591
Schluesseleinsatzsa

121235591
NO PRIMARY REF 12-123-5591: RNCC: 3 | RNVC: 2
107882: RNCC: 5 | RNVC: 9
4115-3-4-5: RNCC: 5 | RNVC: 9
4115-3B: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-090-9778

5120-12-353-4670
Ausdrueckwerkzeug

123534670
5605890561/00: RNCC: 3 | RNVC: 2
560589056100: RNCC: 5 | RNVC: 2

28 Mar 2001

5120-12-021-2588

5120-12-321-7861
Bearing And Bushing Inserter

123217861
41810-T600: RNCC: 3 | RNVC: 2

26 Jun 1990

5120-12-317-1396
Face Spanner Wrench Socket

123171396
319589030700: RNCC: 3 | RNVC: 2

13 Mar 1989

5120-12-374-4333
Socket Head Screw Key Set

123744333
270-160-08: RNCC: 3 | RNVC: 2
00.40.94.20: RNCC: 5 | RNVC: 2

18 Feb 2008

5120-12-192-8049
Bearing And Bushing Inserter

121928049
615 589 01 15 00: RNCC: 3 | RNVC: 2
615589011500: RNCC: 3 | RNVC: 2

26 May 1982

5120-12-198-0171
Drive Pin Punch

121980171
FM7017: RNCC: 3 | RNVC: 2
MAGERD 9809: RNCC: 5 | RNVC: 9

12 Dec 1983

5120-12-326-0184
Hydraulisc Adapter

123260184
460589026300: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-021-3508

5120-12-368-1178
Lamp Cap Extractor

123681178
JD5120121936378 -TCS: RNCC: 3 | RNVC: 2

12 Dec 2005

5120-12-320-0191
Socket Head Screw Key

123200191
A1Z10158504: RNCC: 3 | RNVC: 2
10158504: RNCC: 5 | RNVC: 2
9213 190948: RNCC: 5 | RNVC: 9

28 Nov 1989

5120-12-153-7298
Electronic Equipment Alignment Tool

121537298
5553: RNCC: 3 | RNVC: 2
137863: RNCC: 5 | RNVC: 2
1-M 380-3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-367-6551
Screwdriver Bit

123676551
41K-0,6X3,5: RNCC: 3 | RNVC: 2
00.45.03.41: RNCC: 5 | RNVC: 2
01280006: RNCC: 5 | RNVC: 2

20 Sep 2005

5120-12-309-9435
Cross Tip Screwdriver

123099435
64840-1: RNCC: 3 | RNVC: 2
1405-1: RNCC: 3 | RNVC: 2
250A-02-0201: RNCC: 5 | RNVC: 2
66770 1: RNCC: 5 | RNVC: 2
01405001080: RNCC: 5 | RNVC: 2
250A-02-0201: RNCC: 5 | RNVC: 9
08905: RNCC: 5 | RNVC: 9
350SPRGR1/80: RNCC: 5 | RNVC: 9

20 Mar 1987

5120-12-334-6169
Lifting Pneumatic Bag

123346169
1310 0013 00: RNCC: 3 | RNVC: 2
WRSOM0358: RNCC: 3 | RNVC: 2
1310001300: RNCC: 5 | RNVC: 2
V24L: RNCC: 5 | RNVC: 2
131 05 000: RNCC: 5 | RNVC: 9

30 May 1994

5120-12-355-9096
Hydraulic Jack Parts Kit

123559096
0005800626: RNCC: 3 | RNVC: 2

4 Jan 2002

5120-12-317-4332
Cross Tip Screwdriver

123174332
08705: RNCC: 3 | RNVC: 9

6 Apr 1989

5120-12-135-8946

5120-12-156-1609
Box Wrench

121561609
NM286-20: RNCC: 3 | RNVC: 2
NM286-20: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-149-5856
Socket Wrench

121495856
NO PRIMARY REF 12-149-5856: RNCC: 3 | RNVC: 2
105187: RNCC: 5 | RNVC: 9
1937M7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-9063
Schluessel

121279063
10074ALU: RNCC: 3 | RNVC: 2
10074ALU: RNCC: 3 | RNVC: 2
10074ALU: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-364-1949
Dreh Haltewerkzeug

123641949
F6557955: RNCC: 3 | RNVC: 2

31 Aug 2004

5120-12-158-5934
Screw Thread Insert Tang Breakoff Tool

121585934
01586040000: RNCC: 3 | RNVC: 2
01581040000: RNCC: 5 | RNVC: 9
01581697000: RNCC: 5 | RNVC: 9
01584040000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-369-3973
Machinist's Vise

123693973
10815 UND 10617: RNCC: 3 | RNVC: 2
00.10.00.30: RNCC: 5 | RNVC: 2

29 Jun 2006

5120-12-361-4749
Mechanical Puller Attachment

123614749
038.011.0-4: RNCC: 3 | RNVC: 2
909189405: RNCC: 5 | RNVC: 2

7 Oct 2003

5120-12-137-0988
Kuehlwa Abziehring

121370988
35-10-16: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-354-0310
Seal Inserter

123540310
740589021500: RNCC: 3 | RNVC: 2
740 589 02 15 00: RNCC: 5 | RNVC: 2

29 May 2001

5120-12-358-7990
Socket Wrench Set

123587990
23040: RNCC: 3 | RNVC: 2

15 Nov 2002

5120-12-020-5626

5120-12-327-7296
Screw Thread Insert Tang Breakoff Tool

123277296
01580404000: RNCC: 3 | RNVC: 2
0158 0404 000: RNCC: 5 | RNVC: 2
0158-0404-000: RNCC: 5 | RNVC: 2

25 Feb 1992

5120-12-181-7430
Gegenhalter

121817430
3552034: RNCC: 3 | RNVC: 2

14 Dec 1979

5120-12-185-4092
Socket Head Screw Key

121854092
0007550407: RNCC: 3 | RNVC: 2

3 Oct 1980

5120-12-318-2892
Quick Adjusting Screw Clamp

123182892
460589043100: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-12-310-9341
Spanner Wrench

123109341
71112300061: RNCC: 3 | RNVC: 2
0453-2: RNCC: 3 | RNVC: 2
97008270350: RNCC: 5 | RNVC: 2

10 Jul 1987

5120-12-362-8340
Electrical Contact Remover

123628340
9115: RNCC: 3 | RNVC: 2

6 Apr 2004

5120-12-150-3963
Dorn

121503963
1X46106167: RNCC: 3 | RNVC: 2
V106167: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-306-9462
Spanner Wrench Handle

123069462
0018-0046-000: RNCC: 3 | RNVC: 2
0018-0046-000: RNCC: 5 | RNVC: 9

18 Apr 1986

5120-12-339-9695
Eindrueckwerkzeug

123399695
5073954: RNCC: 3 | RNVC: 2
698-461-0020: RNCC: 5 | RNVC: 2

7 Feb 1996

5120-12-390-5635
Socket Head Screw Key

123905635
2014441-5: RNCC: 3 | RNVC: 2
2014441-5: RNCC: 5 | RNVC: 2

23 Nov 2012

5120-12-387-6835
Bearing And Bushing Inserter

123876835
F30378425: RNCC: 3 | RNVC: 2

24 Jan 2012

5120-12-342-1464
Socket Wrench Socket

123421464
000589390700: RNCC: 3 | RNVC: 2

18 Dec 1996

5120-12-120-6441
Hammer Handle

121206441
DIN5111-X-350-B-ES-LACKIERT: RNCC: 2 | RNVC: 2
46-350,ESCHE,GERADE: RNCC: 3 | RNVC: 2
00.76.29.63: RNCC: 5 | RNVC: 2
350DIN5111BLACKIERT: RNCC: 5 | RNVC: 9
19-350: RNCC: 5 | RNVC: 9
350DIN5111: RNCC: 5 | RNVC: 9
DIN5111-350-BLACKIERT: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-126-3141
Serving Mallet

121263141
TL5120-0026-A: RNCC: 2 | RNVC: 2
5120-0026ITEMA: RNCC: 5 | RNVC: 9
5120-026ITEMA: RNCC: 5 | RNVC: 9
TL5120-0026ITEMA: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-181-8786
Flat Tip Screwdriver

121818786
3055/3: RNCC: 3 | RNVC: 2
213-4X100: RNCC: 3 | RNVC: 2
550-IS100: RNCC: 3 | RNVC: 2
762V-100X4: RNCC: 3 | RNVC: 2
213020: RNCC: 5 | RNVC: 2
42743: RNCC: 5 | RNVC: 2
750-3: RNCC: 5 | RNVC: 9
762-100X4: RNCC: 5 | RNVC: 9
53925: RNCC: 5 | RNVC: 9
833-4: RNCC: 5 | RNVC: 9

21 Dec 1979

5120-12-361-1432
Pneumatic Tire Valve Core Inserter And Remover

123611432
5628308: RNCC: 3 | RNVC: 2

27 Aug 2003

5120-12-132-1094
Open End Wrench

121321094
AWENTW2544A58: RNCC: 3 | RNVC: 2
AWENTW2544A58: RNCC: 5 | RNVC: 2
AWENTW2544A58: RNCC: 5 | RNVC: 2
AWENTW2544A58: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-386-5596
Driftpin

123865596
F30450555: RNCC: 3 | RNVC: 2

12 Sep 2011

5120-12-372-7586
Socket Wrench

123727586
11248903400: RNCC: 3 | RNVC: 2

17 Aug 2007

5120-12-358-8686
Fixed Open End Wrench Set

123588686
96593415: RNCC: 3 | RNVC: 2

22 Nov 2002

5120-12-139-2538
Mechanical Puller

121392538
004M02200: RNCC: 3 | RNVC: 2
VM74896: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-340-2652
Gewindeein Spindel

123402652
01500678620: RNCC: 3 | RNVC: 2

20 Mar 1996

5120-12-133-3699
Open End Wrench

121333699
NO PRIMARY REF 12-133-3699: RNCC: 3 | RNVC: 2
105841: RNCC: 5 | RNVC: 9
1953Z1X1 1-8: RNCC: 5 | RNVC: 9
1953Z1X1/1-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-166-0128
Abziehglocke

121660128
2360-264171.00.0: RNCC: 2 | RNVC: 2
2360-264171.00.0: RNCC: 3 | RNVC: 2
2360-264171-00-0: RNCC: 5 | RNVC: 2
2360-264171.00.0: RNCC: 5 | RNVC: 2
2360-264171-00-0: RNCC: 5 | RNVC: 9
2360-264171.00.0: RNCC: 5 | RNVC: 9

24 Jul 1976

5120-12-324-7006
Hand Rivet Set

123247006
VN208-3: RNCC: 3 | RNVC: 2
NV1-030583-3: RNCC: 5 | RNVC: 2

18 Mar 1991

5120-12-170-8570
Einstellvorrichtung

121708570
NO PRIMARY REF 12-170-8570: RNCC: 3 | RNVC: 2
213203: RNCC: 5 | RNVC: 2
213203: RNCC: 5 | RNVC: 9

17 Aug 1977

5120-12-145-8053
Aus- Und Einziehvor

121458053
837589333300: RNCC: 3 | RNVC: 2
8375893333: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-345-6774
Swivel Knob Jeweler's Screwdriver

123456774
ESD140610: RNCC: 3 | RNVC: 2

14 Apr 1998

5120-12-092-2247

5120-12-123-4960
Hand Hammer

121234960
031A234: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-123-4908
Hand Caulking Tool

121234908
031A340: RNCC: 3 | RNVC: 2
3012: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-305-3540
Screw Thread Insert Tang Breakoff Tool

123053540
01584250000: RNCC: 3 | RNVC: 2

25 Oct 1985

5120-12-172-8625
Socket Wrench

121728625
9291380456: RNCC: 3 | RNVC: 2
003.526.030.121: RNCC: 5 | RNVC: 9

27 Feb 1978

5120-12-357-2279
Duese Reiniger

123572279
0986611166: RNCC: 3 | RNVC: 2

23 May 2002

5120-12-171-7498
Combination Box And Open End Wrench Set

121717498
1952DIN13T: RNCC: 3 | RNVC: 9
105690: RNCC: 5 | RNVC: 9

10 Nov 1977

5120-12-378-8586
Socket Wrench Set

123788586
0965900901: RNCC: 3 | RNVC: 2
A0965 900 901: RNCC: 5 | RNVC: 2
391413325101: RNCC: 6 | RNVC: 9

20 May 2009

5120-12-385-1815
Screwdriver Bit

123851815
26544: RNCC: 3 | RNVC: 2
2859-1,3: RNCC: 5 | RNVC: 2

9 May 2011

5120-12-023-1452

5120-12-121-6877

5120-12-139-3033
Dorn

121393033
8205890343: RNCC: 3 | RNVC: 2
016M02500: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-384-2658
Piston Inserter

123842658
F6348803: RNCC: 3 | RNVC: 2

8 Feb 2011

5120-12-141-6646
Hand Tube Bender

121416646
636D502B1-2IN: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-171-2455
Mechanical Puller Step Plate

121712455
VG95211-ML-121712455: RNCC: 2 | RNVC: 2
1X56 131 396: RNCC: 3 | RNVC: 2
1X56131396: RNCC: 5 | RNVC: 9

21 Sep 1977

5120-12-334-9501
Mechanical Puller Step Plate

123349501
11.49042-0125: RNCC: 3 | RNVC: 2
C11.49021-0260TEIL3: RNCC: 5 | RNVC: 2
C11.49021-0260TEIL3: RNCC: 5 | RNVC: 9
11.49042-0125: RNCC: 5 | RNVC: 9

5 Jul 1994

5120-12-123-5653
Combination Box And Open End Wrench

121235653
1B-1.1/4: RNCC: 3 | RNVC: 2
14A1 1-4: RNCC: 3 | RNVC: 2
1952Z1 1-4: RNCC: 3 | RNVC: 2
105763: RNCC: 5 | RNVC: 2
600687: RNCC: 5 | RNVC: 2
40505656: RNCC: 5 | RNVC: 2
179960: RNCC: 5 | RNVC: 9
1952C-Z1 1/4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-349-9159
Cross Tip Screwdriver

123499159
01411000280: RNCC: 3 | RNVC: 2

26 Jan 2000

5120-12-363-8717
Bearing And Bushing Inserter And Remover

123638717
T670P5001210: RNCC: 3 | RNVC: 2

31 Jul 2004

5120-12-182-1227
Schluesselteil

121821227
5224-600-5: RNCC: 2 | RNVC: 2
W2359-30-5: RNCC: 2 | RNVC: 2
W2359-30-5: RNCC: 3 | RNVC: 2
5224-600-5: RNCC: 5 | RNVC: 2

14 Jan 1980

5120-12-321-2387
Gl Montierwerkzeug

123212387
7 129 13 04 00: RNCC: 3 | RNVC: 2
SUS-9-0299: RNCC: 5 | RNVC: 2
7-129-13-04-00: RNCC: 5 | RNVC: 2

20 Apr 1990

5120-12-146-1116
Mechanical Puller

121461116
25704-360305.00.0: RNCC: 2 | RNVC: 2
25704-360305-00-0: RNCC: 3 | RNVC: 2
25704-360305.00.0: RNCC: 3 | RNVC: 2

30 May 1969

Load More Results