What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

What is a Hand Lead Seal Press?

A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.

What is a Hand Beading Tool?

A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.

Hand Tools, Nonedged, Nonpowered - Germany (DE)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Germany (DE) - NCB is 12

Page 12 of 62

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by Germany

51	20	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - Germany (DE)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Hand Vise? 31 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 25 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 111 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 93 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 587 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 13 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
What is a Hand Tube Flaring Tool? 32 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 17 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 21 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 76 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 1670 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
What is a Pipe Wrench? 54 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 165 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 55 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 77 Items
What is a Screwdriver Bit? 446 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 17 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1303 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 876 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1273 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 17 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 282 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 49 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 669 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 39 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 17 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Wrecking Bar? 10 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 12 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 356 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 484 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 37 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 110 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 13 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 54 Items
What is a Hole Sheet Metal Holder? 40 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 10 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 62 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 11 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Socket Wrench Handle Bar? 160 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 33 Items
Riveter,Blind,Hand 31 Items
What is a Hand Shovel? 24 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 37 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 20 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Block,Dolly,Sheet Metalworking 33 Items
What is a Piston Ring Compressor? 61 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fuse Puller? 22 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 12 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 54 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 406 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 11 Items
What is a Lamp Extractor? 95 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Carpenters' Pincers? 16 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 20 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Hand Pipe And Sewer Auger? 15 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 23 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 36 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 11 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 26 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
Replacing Tool,Engine Valve Seat Insert 10 Items
What is a Rivet Bucking Bar? 20 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 154 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 175 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 30 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 16 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Hand Helical Spring Puller Hook? 12 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 12 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 224 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 208 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 61 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 163 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 42 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 14 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 16 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Marlinespike? 11 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 104 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 39 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Socket Wrench Adapter-Extension? 11 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 21 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 149 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Wrench Extension Handle? 36 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Wrench Head Socket? 13 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 267 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 18 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 40 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 35 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 998 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 350 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 102 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 468 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 42 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 14 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 27 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Pin Vise? 12 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Dapping Punch? 16 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Tire Iron? 29 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 123 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 61 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 241 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 48 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 32 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
Spoon,Body And Fender 15 Items
What is a Wrench Kit? 26 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Screw Extractor Set? 14 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 24 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 17 Items
Pick,Digging 13 Items
What is a Hand Intrenching Tool? 13 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Piston Ring Expander? 28 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 15 Items
Mallet,Rubber 11 Items
What is a Rack Bar Jack? 24 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Hand Tube Flaring Punch? 15 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 14 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 15 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is an Etching Needle? 10 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Mechanical Puller? 1147 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 505 Items
What is a Slip Joint Pliers? 95 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 11 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 112 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 14 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 16 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 35 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 19 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 32 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 73 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Refrigeration Valve Stem Wrench Socket? 10 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 27 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Mechanical Puller Step Plate? 72 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 26 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 34 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Hand Yoke Riveter? 13 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is a Hand Material Handling Hook? 17 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 22 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 68 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 10 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Mechanical Puller Forcing Screw? 66 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 66 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 18 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 16 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 25 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 37 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 11 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 84 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 177 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 40 Items
Handle,Shovel 22 Items
What is a Torque Wrench Set? 13 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 12 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 626 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 59 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 466 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 23 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 18 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 80 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 23 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 12 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 12 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Seal Inserter And Remover? 42 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 158 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is an Electrical Contact Inserter And Remover? 21 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 28 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Piston Inserter? 39 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 23 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 11 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 20 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 13 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 10 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 145 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 10 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 11 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 28 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 12 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Bearing Staking Installation Tool? 14 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 15 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Pedal Adjustment Tool Compressor? 38 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Plug Electrical Connector Extractor? 20 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Screwdriver Handle? 12 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 11 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 313 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Flat Tip And Cross Tip Screwdriver Set? 22 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 14 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 442 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 29 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Arm,Handling Tool 16 Items
What is a Splicing Sleeve Compressing Tool? 11 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
Handle,Hydraulic Jack 30 Items
What is a Manual Impact Wrench? 17 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Torque Screwdriver? 15 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.

Stock Items From Supply Class 5120 Page 12 of 62

5120-12-362-4411
Mater Saug- Griff

123624411
T5082: RNCC: 3 | RNVC: 2
845-768: RNCC: 5 | RNVC: 2

25 Feb 2004

5120-12-130-4374
Montierstange

121304374
4157827: RNCC: 3 | RNVC: 2
4157-827: RNCC: 5 | RNVC: 2
180-0108: RNCC: 5 | RNVC: 9
180-108: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-163-6645
Abziehvorrichtung

121636645
26-21C1493G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-120-9177
Spanner Wrench

121209177
571G201-10-50: RNCC: 3 | RNVC: 2
H21756: RNCC: 5 | RNVC: 2
209-29: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-170-8660
Spanner Wrench

121708660
342081: RNCC: 3 | RNVC: 2

17 Aug 1977

5120-12-170-2623

5120-12-347-5670
Slip Joint Pliers

123475670
135-5VDE: RNCC: 3 | RNVC: 2

8 Jan 1999

5120-12-317-1478
Crimping Tool Die

123171478
300455461: RNCC: 3 | RNVC: 2

14 Mar 1989

5120-12-181-5083
Socket Wrench

121815083
131500: RNCC: 3 | RNVC: 2
4619: RNCC: 5 | RNVC: 2
89231035: RNCC: 5 | RNVC: 2

26 Nov 1979

5120-12-130-6348
Socket Wrench Socket

121306348
46DWN30: RNCC: 3 | RNVC: 2
90199: RNCC: 5 | RNVC: 2
46DWN30: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-331-3542
Torque Wrench

123313542
8952F: RNCC: 3 | RNVC: 2
180843: RNCC: 5 | RNVC: 2

27 Apr 1993

5120-12-168-1500
Screw Thread Insert Inserter

121681500
01500410000: RNCC: 3 | RNVC: 2
F3 0005122: RNCC: 5 | RNVC: 2
01552100000: RNCC: 5 | RNVC: 9

23 Feb 1977

5120-12-377-9997
Socket Head Screw Key

123779997
00905: RNCC: 3 | RNVC: 2
334-2,0X200: RNCC: 5 | RNVC: 2

4 Mar 2009

5120-12-135-0214
Socket Wrench

121350214
NO PRIMARY REF 12-135-0214: RNCC: 3 | RNVC: 2
105402: RNCC: 5 | RNVC: 9
1945NKBZ3-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-154-1037
Presz- Und S Griff

121541037
CH2183-2: RNCC: 3 | RNVC: 2
8205893931/00: RNCC: 5 | RNVC: 2
8205893931/00: RNCC: 5 | RNVC: 2
8205893931/00: RNCC: 5 | RNVC: 2
CH2183-2: RNCC: 5 | RNVC: 9
820589393100: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-171-3421
Torque Wrench

121713421
668087: RNCC: 3 | RNVC: 9
4506-12M: RNCC: 5 | RNVC: 9

30 Sep 1977

5120-12-380-2638
Drive Pin Punch

123802638
350761: RNCC: 3 | RNVC: 2
94191-010 W1: RNCC: 5 | RNVC: 2

13 Oct 2009

5120-12-302-4246
Pliers

123024246
2503-125: RNCC: 3 | RNVC: 2
21 04: RNCC: 5 | RNVC: 9
2103120: RNCC: 5 | RNVC: 9
2103125: RNCC: 5 | RNVC: 9
2104: RNCC: 5 | RNVC: 9
2104-120: RNCC: 5 | RNVC: 9

28 Dec 1984

5120-12-310-0559
Socket Wrench

123100559
4983055: RNCC: 3 | RNVC: 2
MAGERD G441: RNCC: 5 | RNVC: 9

2 Apr 1987

5120-12-196-1660
Montierhuelse

121961660
1.3-4030-407: RNCC: 3 | RNVC: 2
MAGERD 8772: RNCC: 5 | RNVC: 9

7 Jun 1983

5120-12-365-2917
Seal Inserter

123652917
8090 798 005: RNCC: 3 | RNVC: 2

16 Dec 2004

5120-12-378-5460
Socket Wrench

123785460
MK-S026000 200: RNCC: 3 | RNVC: 2
0276 0773: RNCC: 5 | RNVC: 2

21 Apr 2009

5120-12-165-6053
Hand Tube Bender

121656053
2.5182: RNCC: 3 | RNVC: 2
107993: RNCC: 5 | RNVC: 9
R4450M10: RNCC: 5 | RNVC: 9

1 Jun 1976

5120-12-163-6097
Mechanical Puller

121636097
105-41901W1: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-386-8653
Spanner Wrench

123868653
0.411.1861: RNCC: 3 | RNVC: 2
0.411.1861: RNCC: 5 | RNVC: 2

10 Oct 2011

5120-12-311-6711
Hand Hydraulic Jack

123116711
NM553: RNCC: 3 | RNVC: 2
12MPNM553: RNCC: 5 | RNVC: 9
NM553: RNCC: 5 | RNVC: 9

5 Oct 1987

5120-12-374-4065
Mounting Sleeve

123744065
346589016100: RNCC: 3 | RNVC: 2

14 Feb 2008

5120-12-141-2553
Socket Head Screw Key

121412553
571F201B: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-091-4753

5120-12-023-1444

5120-12-305-9585
Seal Inserter

123059585
01TC34821: RNCC: 3 | RNVC: 2

14 Jan 1986

5120-12-319-8663
Flat Tip Screwdriver

123198663
66330-3,5: RNCC: 3 | RNVC: 2
250A-01-0102: RNCC: 5 | RNVC: 2
250A-01-0102: RNCC: 5 | RNVC: 9

10 Nov 1989

5120-12-384-1564
Mechanical Puller

123841564
80996026035: RNCC: 3 | RNVC: 2
80.99602-6035: RNCC: 5 | RNVC: 2

27 Jan 2011

5120-12-156-1613
Box Wrench

121561613
NM287-05: RNCC: 3 | RNVC: 2
NM287-05: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-360-7006
Hand Terminal Crimping Tool

123607006
05L8516: RNCC: 3 | RNVC: 2
HTI15: RNCC: 3 | RNVC: 2
0015382730: RNCC: 5 | RNVC: 2

1 Jul 2003

5120-12-364-3453
Ratchet Wrench

123643453
41130708-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-365-9662
Mechanical Puller

123659662
204-0: RNCC: 3 | RNVC: 2

22 Feb 2005

5120-12-326-2687
Bearing And Bushing Inserter

123262687
F30149065: RNCC: 3 | RNVC: 2

23 Aug 1991

5120-12-374-7677
Mechanical Puller

123747677
8001550: RNCC: 3 | RNVC: 2
1.06/21: RNCC: 5 | RNVC: 2
4036976104288: RNCC: 5 | RNVC: 2
8001550: RNCC: 5 | RNVC: 2
1.06/21: RNCC: 5 | RNVC: 2
4036976104288: RNCC: 5 | RNVC: 2
8001550: RNCC: 5 | RNVC: 2

18 Mar 2008

5120-12-167-8760
Einbauwerkzeug

121678760
MS90455-1: RNCC: 3 | RNVC: 2

31 Jan 1977

5120-12-375-8438
Flat Tip Screwdriver

123758438
00697: RNCC: 3 | RNVC: 2
302-4,5X125: RNCC: 3 | RNVC: 2

10 Jul 2008

5120-12-372-7932
Flat Tip Screwdriver Set

123727932
05105656001: RNCC: 3 | RNVC: 2
334/355/6: RNCC: 5 | RNVC: 2
105656: RNCC: 5 | RNVC: 9

22 Aug 2007

5120-12-326-0198
Mater Saug- Griff

123260198
603.0: RNCC: 3 | RNVC: 2

30 Jul 1991

5120-12-364-3376
Socket Wrench Socket

123643376
02010014-TCS: RNCC: 3 | RNVC: 2

11 Sep 2004

5120-12-142-0249
Hand Storage Battery Carrier

121420249
91K: RNCC: 3 | RNVC: 2
042D055: RNCC: 3 | RNVC: 2
3081: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-360-0237
Electrical Contact Remover

123600237
VG95236T04BB001: RNCC: 2 | RNVC: 2

28 Mar 2003

5120-12-130-8592
Socket Wrench Socket

121308592
SU28: RNCC: 3 | RNVC: 2
7810SZ7-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-041-5748

5120-12-318-9091

5120-12-364-5660
Socket Wrench Crowfoot Attachment

123645660
02200016-TCS: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-12-321-1358
Schluessel

123211358
F30270635: RNCC: 3 | RNVC: 2
F362510270635: RNCC: 5 | RNVC: 9

2 Apr 1990

5120-12-368-8269
Socket Wrench Screwdriver Attachment

123688269
3245TXL 27: RNCC: 3 | RNVC: 2
00.50.34.87: RNCC: 5 | RNVC: 2

26 Apr 2006

5120-12-374-5052
Pipe Wrench

123745052
JD-KRZ4: RNCC: 3 | RNVC: 2

21 Feb 2008

5120-12-094-0329

5120-12-348-7858
Socket Wrench Screwdriver Attachment

123487858
A6709Z-7/32: RNCC: 3 | RNVC: 2
44A-7/32: RNCC: 3 | RNVC: 2
01450014: RNCC: 5 | RNVC: 2
01 45 00 14: RNCC: 5 | RNVC: 9

18 Aug 1999

5120-12-180-3945
Gas- Loetlampe

121803945
4071120: RNCC: 3 | RNVC: 9
19-11: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-12-317-1934
Torque Wrench Adapter

123171934
P-896438-404: RNCC: 3 | RNVC: 2
P896438-404: RNCC: 5 | RNVC: 2

16 Mar 1989

5120-12-121-6862
Craftsman's Tweezers

121216862
5468-180: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-195-9555
Socket Wrench

121959555
537152-0063.000: RNCC: 3 | RNVC: 2
53 71 52-0063: RNCC: 5 | RNVC: 9
537152-0063: RNCC: 5 | RNVC: 9
537152-0063.000: RNCC: 5 | RNVC: 9

5 May 1983

5120-12-362-5687
Craftsman's Tweezers

123625687
54.0084.960.70: RNCC: 3 | RNVC: 2
5468-112: RNCC: 5 | RNVC: 2

6 Mar 2004

5120-12-392-9356
Socket Head Screw Key

123929356
10759A-2-1/16: RNCC: 3 | RNVC: 2
43564004: RNCC: 5 | RNVC: 2
4018754085101: RNCC: 5 | RNVC: 2

24 Jul 2013

5120-12-172-2787
Spanner Wrench

121722787
335929-9019.000: RNCC: 3 | RNVC: 2
1240-11000W1: RNCC: 5 | RNVC: 2
1240-11000W1: RNCC: 5 | RNVC: 2
335929-9019.000: RNCC: 5 | RNVC: 9

10 Jan 1978

5120-12-327-2289
Spanner Wrench

123272289
009-039.100-000W9: RNCC: 3 | RNVC: 2

18 Dec 1991

5120-12-355-9282
Hand Blind Riveter

123559282
GBM20-M5: RNCC: 3 | RNVC: 2
721-0019: RNCC: 5 | RNVC: 2
7210019: RNCC: 5 | RNVC: 2

8 Jan 2002

5120-12-319-3209
Ausdrueckwerkzeug

123193209
61495700: RNCC: 3 | RNVC: 2

22 Sep 1989

5120-12-368-8085
Combination Box And Open End Wrench

123688085
40100707-TCS: RNCC: 3 | RNVC: 2

24 Apr 2006

5120-12-360-6728
Face Spanner Wrench Socket

123606728
0015384130: RNCC: 3 | RNVC: 2

26 Jun 2003

5120-12-091-6758

5120-12-389-5097
Torque Wrench Adapter

123895097
R809236: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-12-392-7414
Open End Box Wrench

123927414
SEWZG017: RNCC: 3 | RNVC: 2

3 Jul 2013

5120-12-174-8364
Flat Tip Screwdriver

121748364
NM254-01: RNCC: 3 | RNVC: 2
NM254-01: RNCC: 5 | RNVC: 9

7 Aug 1978

5120-12-175-1477
Haltevorrichtung

121751477
VG95211-ML-121751477: RNCC: 2 | RNVC: 2
1X56 136 905: RNCC: 3 | RNVC: 2
1X56136905: RNCC: 5 | RNVC: 9

28 Aug 1978

5120-12-389-1482
C Clamp

123891482
584.02-109100-000: RNCC: 3 | RNVC: 2
646611: RNCC: 5 | RNVC: 2

30 May 2012

5120-12-388-5027
Open End Wrench

123885027
2346399: RNCC: 3 | RNVC: 2

27 Mar 2012

5120-12-176-6570
Adjustable Wrench

121766570
416A: RNCC: 3 | RNVC: 9

11 Dec 1978

5120-12-390-1310
Installation And Re

123901310
437589194300: RNCC: 3 | RNVC: 2

9 Oct 2012

5120-12-312-1392
Mechanical Puller Attachment

123121392
80996060243: RNCC: 3 | RNVC: 2
80.99606.0243: RNCC: 5 | RNVC: 2

26 Nov 1987

5120-12-010-9609

5120-12-126-3143
Drive Pin Punch

121263143
JDF15-150: RNCC: 3 | RNVC: 2
5180-0022-8: RNCC: 5 | RNVC: 9
5180-022-8: RNCC: 5 | RNVC: 9
TL5180-0022-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-8790
Scratch Awl

121278790
907-40: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-367-0405
Schluessel

123670405
0000LLCA45298: RNCC: 3 | RNVC: 2

1 Jul 2005

5120-12-023-1936

5120-12-126-3304
Blacksmith's Top Swage

121263304
0001801-10: RNCC: 3 | RNVC: 2
5048020010: RNCC: 3 | RNVC: 2
5048.02-10: RNCC: 5 | RNVC: 2
18-10: RNCC: 5 | RNVC: 9
0B10DIN5104: RNCC: 5 | RNVC: 9
5048-10: RNCC: 5 | RNVC: 9
DIN5104-OB10: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-140-1954
Box Wrench

121401954
640-32: RNCC: 3 | RNVC: 2
2A32: RNCC: 3 | RNVC: 2
5-32: RNCC: 3 | RNVC: 2
42020032: RNCC: 5 | RNVC: 2
07100: RNCC: 5 | RNVC: 2
2A131: RNCC: 5 | RNVC: 9
1307110004: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-377-2232
Socket Wrench Handle

123772232
512SGS: RNCC: 3 | RNVC: 2

18 Dec 2008

5120-12-335-4913
Hand Hammer

123354913
3026050: RNCC: 3 | RNVC: 2
51228050: RNCC: 3 | RNVC: 2

23 Aug 1994

5120-12-304-9598
Bearing And Bushing Inserter

123049598
6796930W11: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-12-366-1952
Tool Handle Wedge

123661952
TL5120-0137-040: RNCC: 2 | RNVC: 2
8594350: RNCC: 3 | RNVC: 2
E-5-500: RNCC: 3 | RNVC: 9
E-5-500: RNCC: 5 | RNVC: 2
4010883859431: RNCC: 5 | RNVC: 2
4010883859431: RNCC: 5 | RNVC: 9
8594350: RNCC: 5 | RNVC: 9
5120-0137-040: RNCC: 5 | RNVC: 9

18 Mar 2005

5120-12-143-3301
Hand Hydraulic Jack

121433301
116015000021: RNCC: 3 | RNVC: 2
8-212-023-000: RNCC: 5 | RNVC: 2
8.212.023.000: RNCC: 5 | RNVC: 2
20-0134: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-188-7012
Spanner Wrench

121887012
100278-74000.01.0: RNCC: 2 | RNVC: 2
100278-74000.01.0: RNCC: 3 | RNVC: 2
100278-74000-01-0: RNCC: 5 | RNVC: 9
100278-74000.01.0: RNCC: 5 | RNVC: 9

27 Jul 1981

5120-12-126-3195
Quick Adjusting Screw Clamp

121263195
E12-6: RNCC: 3 | RNVC: 2
51104-120: RNCC: 3 | RNVC: 2
86050-120: RNCC: 3 | RNVC: 2
860500-120: RNCC: 3 | RNVC: 2
0100/HOLZ02: RNCC: 3 | RNVC: 9
250A-13-1302: RNCC: 5 | RNVC: 2
86050-120: RNCC: 5 | RNVC: 2
250A-13-1302: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-178-4464
Saddler's Sewing Awl Needle

121784464
6890-2-100: RNCC: 3 | RNVC: 9

20 Apr 1979

5120-12-190-6056
Schluessel

121906056
1413568: RNCC: 3 | RNVC: 2
1413568/3: RNCC: 5 | RNVC: 9
1413568-3: RNCC: 5 | RNVC: 9

7 Dec 1981

5120-12-361-1779
Mechanical Puller Attachment

123611779
80996280083: RNCC: 3 | RNVC: 2
80.99628-0083: RNCC: 5 | RNVC: 2

1 Sep 2003

5120-12-381-8828
Combination Box And Open End Wrench Set

123818828
0130000S: RNCC: 3 | RNVC: 2

14 Apr 2010

5120-12-133-6829
Hand Hydraulic Jack

121336829
S40: RNCC: 3 | RNVC: 2
3901918: RNCC: 3 | RNVC: 2
583901918: RNCC: 5 | RNVC: 9
583901918: RNCC: 5 | RNVC: 9
S40: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-383-9794
Special Purpose Combination Wrench

123839794
7092645: RNCC: 3 | RNVC: 2

5 Jan 2011

5120-12-023-0159

5120-12-392-9801
Cross Tip Screwdriver

123929801
501 010 10: RNCC: 3 | RNVC: 2
4007157221032: RNCC: 5 | RNVC: 2
501.010.10: RNCC: 5 | RNVC: 9

29 Jul 2013

5120-12-368-1028
Socket Head Screw Key

123681028
43260010-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-187-9651
Crimping Tool Die

121879651
2733.0: RNCC: 3 | RNVC: 2
E1: RNCC: 5 | RNVC: 2

20 May 1981

5120-12-387-4692
Screw Thread Insert Inserter

123874692
01500127500: RNCC: 3 | RNVC: 2
H-PSG M 27 X 2: RNCC: 5 | RNVC: 2

21 Dec 2011

5120-12-368-6513
Open End Wrench

123686513
146A-3/8X3/8: RNCC: 3 | RNVC: 2
00.25.62.40: RNCC: 5 | RNVC: 2

4 Apr 2006

5120-12-172-8184
Mutter

121728184
VG95211-ML-121728184: RNCC: 2 | RNVC: 2
1X56 136 240-5: RNCC: 3 | RNVC: 2
1X56136240-5: RNCC: 5 | RNVC: 9

22 Feb 1978

5120-12-363-6888
Electrical Contact Remover

123636888
80996060592: RNCC: 3 | RNVC: 2

14 Jul 2004

5120-12-384-1583
Cyli Mounting Tool

123841583
F6787880: RNCC: 3 | RNVC: 2

27 Jan 2011

5120-12-335-9626
Bearing And Bushing Inserter

123359626
0851 4500: RNCC: 3 | RNVC: 2
8514500: RNCC: 5 | RNVC: 2

6 Oct 1994

5120-12-368-9339
Socket Wrench Socket

123689339
DIN3124-S46X25: RNCC: 2 | RNVC: 2
00.52.18.77: RNCC: 5 | RNVC: 2

8 May 2006

5120-12-196-7528
Gummi Einfuehrkegel

121967528
KDEP2884: RNCC: 3 | RNVC: 2
0535351: RNCC: 5 | RNVC: 2
535351: RNCC: 5 | RNVC: 9

10 Aug 1983

5120-12-311-0093
Spanner Wrench

123110093
272.324 812: RNCC: 3 | RNVC: 2

16 Jul 1987

5120-12-364-3137
Socket Wrench Socket

123643137
01240005-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-324-3422
Rotating Members Aligning Tool

123243422
601589052100: RNCC: 3 | RNVC: 2

7 Feb 1991

5120-12-070-0203

5120-12-140-9823
Schluessel

121409823
5099: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-124-1768
Driftpin

121241768
299666: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-333-7707
Box Wrench

123337707
8010: RNCC: 3 | RNVC: 2
7152319: RNCC: 3 | RNVC: 2
304-13X17: RNCC: 3 | RNVC: 2
00.29.94.84: RNCC: 5 | RNVC: 2

3 Feb 1994

5120-12-195-2809
Drahthakenst Gabel

121952809
510190-10: RNCC: 2 | RNVC: 2
510190-10: RNCC: 3 | RNVC: 2
510190-10: RNCC: 5 | RNVC: 9

1 Feb 1983

5120-12-120-5641
Pliers

121205641
53400010: RNCC: 3 | RNVC: 2
8300160: RNCC: 3 | RNVC: 9
5014: RNCC: 5 | RNVC: 2
594-431: RNCC: 5 | RNVC: 2
412: RNCC: 5 | RNVC: 2
573D101: RNCC: 5 | RNVC: 9
160DIN5250: RNCC: 5 | RNVC: 9
DIN5250-160: RNCC: 5 | RNVC: 9
53400: RNCC: 5 | RNVC: 9
4524: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-0995
Spanner Wrench

123810995
DIN1810-B52-55: RNCC: 2 | RNVC: 2
6337040: RNCC: 3 | RNVC: 2
40 Z 52-55: RNCC: 5 | RNVC: 2
4010886633700: RNCC: 5 | RNVC: 2
6337040: RNCC: 5 | RNVC: 2
40 Z 52-55: RNCC: 5 | RNVC: 2
4010886633700: RNCC: 5 | RNVC: 2
391418115109: RNCC: 6 | RNVC: 9

11 Jan 2010

5120-12-336-5530
Face Spanner Wrench Socket

123365530
5870 401 115: RNCC: 3 | RNVC: 2
5870-401-115: RNCC: 5 | RNVC: 2

28 Nov 1994

5120-12-310-0719
Spanner Wrench

123100719
707106-0000.902: RNCC: 3 | RNVC: 2
70 7106-0000 902: RNCC: 5 | RNVC: 9

3 Apr 1987

5120-12-314-9581
Spanner Wrench

123149581
P-0-721A: RNCC: 3 | RNVC: 2
P-0-721: RNCC: 5 | RNVC: 9
P-O-721: RNCC: 5 | RNVC: 9

1 Sep 1988

5120-12-162-7986
Socket Head Screw Key

121627986
NO PRIMARY REF 12-162-7986: RNCC: 3 | RNVC: 2
4-7829-883: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-151-9965
Gleithammer

121519965
2360-264153.00.0: RNCC: 2 | RNVC: 2
2360-264153.00.0: RNCC: 3 | RNVC: 2
2360-264153-00-0: RNCC: 5 | RNVC: 2
2360-264153-00-0: RNCC: 5 | RNVC: 2
2360-264153.00.0: RNCC: 5 | RNVC: 2
2360-264153.00.0: RNCC: 5 | RNVC: 9
2360-264153-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-6900
Pneumatic Tire Valve Repair Tool

121206900
022H003: RNCC: 3 | RNVC: 2
1001-12: RNCC: 3 | RNVC: 2
5628023: RNCC: 3 | RNVC: 2
TL5180-0028-6B: RNCC: 5 | RNVC: 9
5180-0028FIG1-1: RNCC: 5 | RNVC: 9
5180-028FIG1-1: RNCC: 5 | RNVC: 9
5180-0028-6B: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-3410
Socket Head Screw Key

123123410
4900294-200: RNCC: 3 | RNVC: 2

18 Dec 1987

5120-12-368-6860
Socket Wrench Screwdriver Attachment

123686860
8802-T30: RNCC: 3 | RNVC: 2
3244-TX 30: RNCC: 3 | RNVC: 2
00.47.67.14: RNCC: 5 | RNVC: 2

6 Apr 2006

5120-12-374-6143
Bearing And Bushing Inserter

123746143
5075891133/00: RNCC: 3 | RNVC: 2

29 Feb 2008

5120-12-357-7536
Ru Montierwerkzeug

123577536
RD99-00-012000.01: RNCC: 3 | RNVC: 2

19 Jul 2002

5120-12-123-5122
Open End Wrench

121235122
6-11X14: RNCC: 3 | RNVC: 2
DIN3110-11X14: RNCC: 4 | RNVC: 1
606529: RNCC: 5 | RNVC: 2
11X14DIN3110: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-368-8526
Socket Wrench Adapter

123688526
770-S11: RNCC: 3 | RNVC: 2
00.52.13.72: RNCC: 5 | RNVC: 2

28 Apr 2006

5120-12-343-6373
Pliers

123436373
216319: RNCC: 3 | RNVC: 2

10 Jul 1997

5120-12-368-2598
Combination Box And Open End Wrench

123682598
40483838-TCS: RNCC: 3 | RNVC: 2

18 Jan 2006

5120-12-351-4236
Bearing And Bushing Inserter

123514236
0986611679: RNCC: 3 | RNVC: 2

25 Jul 2000

5120-12-312-5342
Spanner Wrench

123125342
061122: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-12-192-5301

5120-12-368-8728
Socket Wrench Handle

123688728
770-S2: RNCC: 3 | RNVC: 2
00.52.02..61: RNCC: 5 | RNVC: 2

3 May 2006

5120-12-700-6681
Hand Manhole Cover Hook

127006681
4209394: RNCC: 3 | RNVC: 2
SCHACHTHAKEN: RNCC: 5 | RNVC: 9

6 Oct 1992

5120-12-123-4910
Hand Caulking Tool

121234910
3010: RNCC: 3 | RNVC: 2
031A342: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-342-0109
Montierdorn

123420109
111790: RNCC: 3 | RNVC: 2
111790: RNCC: 5 | RNVC: 2
0111790: RNCC: 5 | RNVC: 9

29 Nov 1996

5120-12-010-1373

5120-12-196-1535
Ausdrueckwerkzeug

121961535
VG95211-ML-121961535: RNCC: 2 | RNVC: 2
1.3-4038-407: RNCC: 3 | RNVC: 2
MAGERD 8764: RNCC: 5 | RNVC: 9

7 Jun 1983

5120-12-127-4122
Mechanical Puller

121274122
18171630100008: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-149-5493
Piston Ring Compressor

121495493
022533-06085: RNCC: 3 | RNVC: 2
TS453: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-9160
Drive Pin Punch

121749160
59182: RNCC: 3 | RNVC: 2
C 6706 709: RNCC: 5 | RNVC: 2
M20107-1: RNCC: 5 | RNVC: 2
C 6706 709: RNCC: 5 | RNVC: 2

7 Aug 1978

5120-12-382-7850
Cross Tip Screwdriver

123827850
46360006-TCS: RNCC: 3 | RNVC: 2

9 Aug 2010

5120-12-134-2602
La Haltevorrichtung

121342602
009M01701: RNCC: 3 | RNVC: 2
VM65787: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-369-1437
Spatula

123691437
3/2: RNCC: 3 | RNVC: 2
02.32.95.15: RNCC: 5 | RNVC: 2

30 May 2006

5120-12-123-5982

5120-12-360-5114
Open End Wrench

123605114
N0300574: RNCC: 3 | RNVC: 2

28 May 2003

5120-12-368-1496
Lifting Pneumatic Bag

123681496
71313: RNCC: 3 | RNVC: 2

15 Dec 2005

5120-12-336-2518
Weapons Handling Bar

123362518
1000089-90200.01: RNCC: 2 | RNVC: 2
1000089-90200.01: RNCC: 3 | RNVC: 2

4 Nov 1994

5120-12-322-0960
Aligning Punch

123220960
0852 5027: RNCC: 3 | RNVC: 2
8525027: RNCC: 5 | RNVC: 2

24 Jul 1990

5120-12-021-6800

5120-12-174-6053
Inserted Hammer Face

121746053
TL5120-0126-A107: RNCC: 2 | RNVC: 2
3206050: RNCC: 3 | RNVC: 2
220650: RNCC: 5 | RNVC: 9

13 Jul 1978

5120-12-135-0034
Open End Wrench

121350034
3114-22: RNCC: 3 | RNVC: 2
790014477: RNCC: 5 | RNVC: 2
61280-22: RNCC: 5 | RNVC: 2
612800-22: RNCC: 5 | RNVC: 2
0063635: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-364-3563
Mechanical Puller

123643563
2048-9879-010: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-316-5766
Retaining Ring Pliers

123165766
770188: RNCC: 3 | RNVC: 2
B125DIN5254-GERAUHT: RNCC: 5 | RNVC: 9
DIN5254-B125GERAUHT: RNCC: 5 | RNVC: 9

25 Jan 1989

5120-12-301-4551
Box Wrench

123014551
NO PRIMARY REF 12-301-4551: RNCC: 3 | RNVC: 2
1M24: RNCC: 5 | RNVC: 9

16 Oct 1984

5120-12-139-3057
Schluessel

121393057
8205890303: RNCC: 3 | RNVC: 2
022M00900: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-311-1329
Lager- Und Einsatz

123111329
406589114300: RNCC: 3 | RNVC: 2

29 Jul 1987

5120-12-186-1944
Zugstange

121861944
23305-264300.02.0: RNCC: 2 | RNVC: 2
23305-264300-02-0: RNCC: 3 | RNVC: 2
23305-264300.02.0: RNCC: 5 | RNVC: 9
HT30/6891/01: RNCC: 5 | RNVC: 9
23305-264300-02-0: RNCC: 5 | RNVC: 9

5 Dec 1980

5120-12-374-9525
Inspection Mirror

123749525
JD-TK-6000: RNCC: 3 | RNVC: 2

9 Apr 2008

5120-12-126-2472
Hand Hammer

121262472
NO PRIMARY REF 12-126-2472: RNCC: 3 | RNVC: 2
4324: RNCC: 5 | RNVC: 9
107603: RNCC: 5 | RNVC: 9
3722: RNCC: 5 | RNVC: 9
251: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-371-4041
Wrench Kit

123714041
770- RDSMU: RNCC: 3 | RNVC: 2
00.51.00.56: RNCC: 5 | RNVC: 2

26 Mar 2007

5120-12-165-0250
Flat Tip Screwdriver

121650250
63-0715: RNCC: 3 | RNVC: 2
05007635001: RNCC: 3 | RNVC: 2
334-1,0X7X150: RNCC: 3 | RNVC: 9
8000-1X7X150: RNCC: 3 | RNVC: 9
8000-7X150: RNCC: 3 | RNVC: 9
334-1,2X7X150: RNCC: 5 | RNVC: 2
143138: RNCC: 5 | RNVC: 2
8000-9: RNCC: 5 | RNVC: 9
07635: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-321-9330
Spanner Wrench

123219330
2171-9856-000: RNCC: 3 | RNVC: 2
2171-9856-000: RNCC: 5 | RNVC: 9

10 Jul 1990

5120-12-152-7677
Open End Wrench

121527677
5254-2000-04: RNCC: 2 | RNVC: 2

30 May 1969

5120-12-185-1205
Hand Contact Burnisher

121851205
FE831-47: RNCC: 3 | RNVC: 9
06831047: RNCC: 3 | RNVC: 9

11 Sep 1980

5120-12-346-9603
Driftpin

123469603
F6454927: RNCC: 3 | RNVC: 2

2 Oct 1998

5120-12-340-4526
Crowbar

123404526
578022: RNCC: 3 | RNVC: 2

17 Apr 1996

5120-12-196-4221
Open End Wrench

121964221
C105-A12-C52: RNCC: 3 | RNVC: 2
C105A12C52: RNCC: 5 | RNVC: 2

6 Jul 1983

5120-12-092-2475

5120-12-120-6687

5120-12-150-5715
Schluesseleinsatz

121505715
838589010800: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-139-3152
Schluessel

121393152
8205890407: RNCC: 3 | RNVC: 2
023M02500: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-374-6635
Mechanical Puller Adapter

123746635
F6147640: RNCC: 3 | RNVC: 2

5 Mar 2008

5120-12-349-5567
Zahnstangen Halter

123495567
5400049-118130.00: RNCC: 3 | RNVC: 2
24900002: RNCC: 5 | RNVC: 2

2 Dec 1999

5120-12-196-1659
Justierschraube

121961659
1.3-4043-407: RNCC: 3 | RNVC: 2
MAGERD 8770: RNCC: 5 | RNVC: 9

7 Jun 1983

5120-12-127-5422

5120-12-143-9804
Einstell- Dorn

121439804
4015891361: RNCC: 3 | RNVC: 2
4015891361: RNCC: 3 | RNVC: 9
401589136100: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-181-9540
Abziehvorrichtung

121819540
01TC30084: RNCC: 3 | RNVC: 2

28 Dec 1979

5120-12-368-1012
Pliers

123681012
65297160-TCS: RNCC: 3 | RNVC: 2

7 Dec 2005

5120-12-380-1199
Wrench

123801199
SW5008G031: RNCC: 3 | RNVC: 2

29 Sep 2009

5120-12-316-3078
Socket Head Screw Key Blade

123163078
9926BP: RNCC: 3 | RNVC: 2
42520700: RNCC: 3 | RNVC: 9
99-26BP: RNCC: 5 | RNVC: 9

9 Jan 1989

5120-12-314-1734
Bearing And Bushing Inserter

123141734
0852 8769: RNCC: 3 | RNVC: 2
8528769: RNCC: 5 | RNVC: 2

15 Jun 1988

5120-12-167-8762
Ein- Und Ausbauwerk

121678762
FDPJET1: RNCC: 3 | RNVC: 2

31 Jan 1977

5120-12-342-2279
Socket Wrench Socket

123422279
80996030196: RNCC: 3 | RNVC: 2
80.99603-0196: RNCC: 5 | RNVC: 2

8 Jan 1997

5120-12-126-3388
Drive Pin Punch

121263388
434BECU4: RNCC: 3 | RNVC: 2
434BECU4: RNCC: 3 | RNVC: 9
253-4MM: RNCC: 5 | RNVC: 9
1891-4MM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-390-8691
Flat Tip Screwdriver

123908691
911.1185: RNCC: 3 | RNVC: 2

20 Dec 2012

5120-12-184-7142
Drive Pin Punch

121847142
0852 2031: RNCC: 3 | RNVC: 2
8522031: RNCC: 5 | RNVC: 2

14 Aug 1980

5120-12-139-2517
Box Wrench Set

121392517
022M01700: RNCC: 3 | RNVC: 2
080M01700: RNCC: 5 | RNVC: 2
VM77476: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-123-5486

5120-12-146-5901
Spanner Wrench

121465901
23182-9700.04: RNCC: 2 | RNVC: 2
23182-9700.04: RNCC: 3 | RNVC: 2
23182-9700-04: RNCC: 5 | RNVC: 9
23182-9700-04: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-0679
Crowfoot Wrench Head Socket

121290679
NO PRIMARY REF 12-129-0679: RNCC: 3 | RNVC: 2
108379: RNCC: 5 | RNVC: 9
5110Z5-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-350-2709
Bl Ausbeulwerkzeug

123502709
064/A: RNCC: 3 | RNVC: 2

9 Mar 2000

5120-12-392-4547
Socket Head Screw Key

123924547
6000056-990000.002.0: RNCC: 3 | RNVC: 2

10 Jun 2013

5120-12-320-5625
Box Wrench

123205625
2-10X12: RNCC: 3 | RNVC: 2
52056070: RNCC: 5 | RNVC: 2

26 Jan 1990

5120-12-387-6977
Mounting To Sleeve

123876977
F6557134: RNCC: 3 | RNVC: 2

25 Jan 2012

5120-12-310-5394
Seal Inserter

123105394
80996140032: RNCC: 3 | RNVC: 2
80.99614.0032: RNCC: 5 | RNVC: 2

29 May 1987

5120-12-044-4938

5120-12-387-7065
Rotat Holding Tool

123877065
T80092300: RNCC: 3 | RNVC: 2

25 Jan 2012

5120-12-123-5963
Socket Wrench

121235963
3045810001: RNCC: 3 | RNVC: 2
3045810001: RNCC: 3 | RNVC: 9

30 May 1969

5120-12-312-0251
Face Spanner Wrench Socket

123120251
1000042-193642: RNCC: 3 | RNVC: 2

11 Nov 1987

5120-12-041-2674

5120-12-309-8160
Spanner Wrench

123098160
001-218.012-000W1: RNCC: 2 | RNVC: 2
001-218.012-000W1: RNCC: 3 | RNVC: 2

6 Mar 1987

5120-12-365-5748
Hand Tube Bender

123655748
278280: RNCC: 3 | RNVC: 2
278280: RNCC: 3 | RNVC: 2

17 Jan 2005

5120-12-315-1521
Boerdelwer Einsatz

123151521
1650: RNCC: 3 | RNVC: 2
4597-50: RNCC: 3 | RNVC: 2

22 Sep 1988

5120-12-365-6621
Box Wrench

123656621
CBD30102P07: RNCC: 3 | RNVC: 2

24 Jan 2005

5120-12-194-9816
Mechanical Puller Attachment

121949816
1X56136316: RNCC: 3 | RNVC: 2

23 Dec 1982

5120-12-360-0176
Open End Wrench

123600176
595146: RNCC: 3 | RNVC: 2

28 Mar 2003

5120-12-196-4080
Open End Wrench

121964080
NO PRIMARY REF 12-196-4080: RNCC: 3 | RNVC: 2
445084: RNCC: 5 | RNVC: 9

4 Jul 1983

5120-12-123-5838
Socket Wrench Socket

121235838
4015 2 3/8: RNCC: 3 | RNVC: 2
8900DZ2 3-8: RNCC: 3 | RNVC: 2
TVA5120-2-263-027: RNCC: 5 | RNVC: 1
110624: RNCC: 5 | RNVC: 2
TVA5120-2-263-027/1.1.60: RNCC: 5 | RNVC: 2
05410078: RNCC: 5 | RNVC: 9
55A2 3-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-375-8360
Drive Pin Punch

123758360
957313: RNCC: 3 | RNVC: 2
51287034: RNCC: 5 | RNVC: 2

9 Jul 2008

5120-12-314-1777
Spanner Wrench

123141777
Z01: RNCC: 3 | RNVC: 2
Z01: RNCC: 5 | RNVC: 9

15 Jun 1988

5120-12-177-6321
Kolbenringeinbauban

121776321
112910: RNCC: 3 | RNVC: 9

9 Feb 1979

5120-12-321-8039
Sp Montierwerkzeug

123218039
844601927: RNCC: 3 | RNVC: 2

28 Jun 1990

5120-12-123-5128
Open End Wrench

121235128
4507-25000-02: RNCC: 3 | RNVC: 2
JD311022X27: RNCC: 3 | RNVC: 2
6-22X27: RNCC: 3 | RNVC: 2
A6-229: RNCC: 5 | RNVC: 2
0003-4208-320: RNCC: 5 | RNVC: 2
WA1600: RNCC: 5 | RNVC: 2
0003-4208-320: RNCC: 5 | RNVC: 9
6-229: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-193-9161
Torque Wrench

121939161
6293-1CT + 6414: RNCC: 3 | RNVC: 2
3340/3A: RNCC: 3 | RNVC: 2
6293-1CT UND 6414: RNCC: 5 | RNVC: 9
730A/40UND734/20: RNCC: 5 | RNVC: 9
6260420004 + 6264410001: RNCC: 5 | RNVC: 9
5120-40322: RNCC: 6 | RNVC: 9

13 Sep 1982

5120-12-323-4894
Mechanical Puller Attachment

123234894
01TC35345: RNCC: 3 | RNVC: 2

30 Nov 1990

5120-12-368-1746
Spanner Wrench

123681746
252648: RNCC: 3 | RNVC: 9

27 Dec 2005

5120-12-368-1112
Socket Wrench Screwdriver Attachment

123681112
01050004-TCS: RNCC: 3 | RNVC: 2

8 Dec 2005

5120-12-163-6619
Eindrueckwerkzeug

121636619
26-21C1196P010: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-378-8753
Mechanical Puller

123788753
07145250: RNCC: 3 | RNVC: 2
391443113406: RNCC: 6 | RNVC: 9
A0714 52 50: RNCC: 6 | RNVC: 9

25 May 2009

5120-12-333-4595
Friction Igniter

123334595
136: RNCC: 3 | RNVC: 2

20 Dec 1993

5120-12-336-7713
Screwdriver Bit

123367713
600-0,5X4: RNCC: 3 | RNVC: 2

21 Dec 1994

5120-12-174-3270
Spanner Wrench

121743270
776-60-90-5: RNCC: 3 | RNVC: 2
5800686-9.030: RNCC: 5 | RNVC: 2
5800686-9-030: RNCC: 5 | RNVC: 2

26 Jun 1978

5120-12-305-3837
Spanner Wrench

123053837
NO PRIMARY REF 12-305-3837: RNCC: 3 | RNVC: 2
PT-01-934-04/W-1833-02: RNCC: 5 | RNVC: 9

29 Oct 1985

5120-12-315-6523
Socket Wrench

123156523
000-EG-4/188: RNCC: 3 | RNVC: 2
0279: RNCC: 5 | RNVC: 2

16 Nov 1988

5120-12-141-3018
Flat Tip Screwdriver

121413018
36054060: RNCC: 3 | RNVC: 2
05110006001: RNCC: 3 | RNVC: 2
302-4,0X200: RNCC: 3 | RNVC: 2
110006: RNCC: 3 | RNVC: 9
335-0,8X4X200: RNCC: 5 | RNVC: 2
006952: RNCC: 5 | RNVC: 2
4010995006952: RNCC: 5 | RNVC: 2
SSDE68: RNCC: 5 | RNVC: 9
335-5X200: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-143-9068
Combination Box And Open End Wrench

121439068
0005893003: RNCC: 3 | RNVC: 2
000589300300: RNCC: 5 | RNVC: 2
0005893003: RNCC: 5 | RNVC: 2
0005893003: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-311-0627
Seal Inserter

123110627
387589011500: RNCC: 3 | RNVC: 2

22 Jul 1987

5120-12-137-4188

5120-12-197-5419
Socket Wrench Socket

121975419
5801411-64: RNCC: 3 | RNVC: 2
1648074: RNCC: 5 | RNVC: 9

31 Oct 1983

5120-12-340-7082
Mechanical Puller

123407082
1212 8983: RNCC: 3 | RNVC: 2

29 May 1996

5120-12-152-1775
Schluessel

121521775
532686-9006.000: RNCC: 3 | RNVC: 2
532686-9006: RNCC: 5 | RNVC: 9
532686-9006.000: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-157-7527
Socket Wrench Screwdriver Attachment

121577527
985-8: RNCC: 3 | RNVC: 2
2487110004: RNCC: 5 | RNVC: 2
11640: RNCC: 5 | RNVC: 9
6.086.425.0008.1: RNCC: 5 | RNVC: 9
6-086-425-0008-1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-381-9830
Hand Hydraulic Jack

123819830
EBJ-4GC: RNCC: 3 | RNVC: 2
EBJ-04GC: RNCC: 5 | RNVC: 2

23 Apr 2010

5120-12-177-9208
Socket Wrench

121779208
NO PRIMARY REF 12-177-9208: RNCC: 3 | RNVC: 2
26R623-1X1-1-8: RNCC: 5 | RNVC: 9

7 Mar 1979

5120-12-337-5569
Aligning Punch

123375569
62749901: RNCC: 3 | RNVC: 2

13 Mar 1995

5120-12-196-7604
St Montierwerkzeug

121967604
KDEP1041: RNCC: 3 | RNVC: 2
0535340: RNCC: 5 | RNVC: 2
535340: RNCC: 5 | RNVC: 9

11 Aug 1983

5120-12-366-0332
Boiler Tube Wire Brush

123660332
GLZ4798011P1: RNCC: 3 | RNVC: 2

2 Mar 2005

5120-12-319-9802
Plier Clamp

123199802
758-4: RNCC: 3 | RNVC: 2
5370980015: RNCC: 5 | RNVC: 2

24 Nov 1989

5120-12-314-0468
Open End Wrench

123140468
5187017: RNCC: 3 | RNVC: 2

1 Jun 1988

5120-12-179-5353
Federspanner

121795353
VG95211-ML-121795353: RNCC: 2 | RNVC: 2
AFG006046: RNCC: 3 | RNVC: 2

4 Jul 1979

5120-12-190-3222
Hand Tube Flaring Tool

121903222
06-P17408-M27406: RNCC: 3 | RNVC: 2
6P17408M27406: RNCC: 5 | RNVC: 2

19 Nov 1981

5120-12-334-3078
Socket Wrench Handle Bar

123343078
35D-14: RNCC: 3 | RNVC: 2
DIN900-A14: RNCC: 4 | RNVC: 1
632643: RNCC: 5 | RNVC: 2
35 D-14: RNCC: 5 | RNVC: 2
35D-14: RNCC: 5 | RNVC: 2

26 Apr 1994

5120-12-384-5314
Socket Head Screw Key

123845314
0159030123000: RNCC: 3 | RNVC: 2
159KU-12: RNCC: 5 | RNVC: 2

3 Mar 2011

5120-12-179-6478
Socket Wrench Socket

121796478
NO PRIMARY REF 12-179-6478: RNCC: 3 | RNVC: 2
40E10BA: RNCC: 5 | RNVC: 9
01710089: RNCC: 5 | RNVC: 9

13 Jul 1979

5120-12-154-0434
Schluessel

121540434
510305-0500: RNCC: 2 | RNVC: 2
510305-0500: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-156-3106
Hebel

121563106
144006201: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-341-0781
Bearing And Bushing Inserter

123410781
142600-5: RNCC: 3 | RNVC: 2

25 Jul 1996

5120-12-155-8246
Pliers

121558246
65155135: RNCC: 3 | RNVC: 2
DIN5235-D: RNCC: 4 | RNVC: 1
65156135: RNCC: 5 | RNVC: 2
106712: RNCC: 5 | RNVC: 9
2713D: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-327-7407
Torque Wrench

123277407
NO PRIMARY REF 12-327-7407: RNCC: 3 | RNVC: 2
180848: RNCC: 5 | RNVC: 9
6976CF: RNCC: 5 | RNVC: 9

26 Feb 1992

5120-12-324-4721
Drive Pin Punch

123244721
335910-0105.000: RNCC: 2 | RNVC: 2
335910-0105.000: RNCC: 3 | RNVC: 2
335910-0105.000: RNCC: 5 | RNVC: 9

20 Feb 1991

5120-12-389-4869
Cable Type Ratchet Lever Puller

123894869
T532 MZUB: RNCC: 3 | RNVC: 2
5120-21250: RNCC: 6 | RNVC: 9

12 Jul 2012

5120-12-123-5361
Socket Wrench

121235361
DIN659-19: RNCC: 2 | RNVC: 2
S4-6804-111: RNCC: 3 | RNVC: 2
A19H715: RNCC: 3 | RNVC: 2
19DIN659: RNCC: 3 | RNVC: 2
A19H715: RNCC: 3 | RNVC: 2
19DIN659: RNCC: 5 | RNVC: 2
5168K19: RNCC: 5 | RNVC: 9
19DIN659GALNI8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5443
Socket Wrench

121235443
NO PRIMARY REF 12-123-5443: RNCC: 3 | RNVC: 2
24-311: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-347-2665
Piston Ring Compressor

123472665
57405-645: RNCC: 3 | RNVC: 2

18 Nov 1998

5120-12-193-9381
Nietzugst Fuehrung

121939381
349444: RNCC: 3 | RNVC: 2

15 Sep 1982

5120-12-368-3166
Socket Head Screw Key

123683166
43270020-TCS: RNCC: 3 | RNVC: 2

16 Feb 2006

5120-12-126-1844
Tool Handle Wedge

121261844
KRALLE1: RNCC: 3 | RNVC: 2
51250010: RNCC: 3 | RNVC: 2
GW4360-13: RNCC: 3 | RNVC: 2
4394-13: RNCC: 5 | RNVC: 2
51250-1: RNCC: 5 | RNVC: 9
KRALLE1: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-130-4012

5120-12-131-7885
Hand-Operated Grommet And Eyelet Press

121317885
TL5120-0059-1: RNCC: 2 | RNVC: 2
WP150E: RNCC: 3 | RNVC: 2
WP150E: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-129-8790
Abziehzange

121298790
1687965013: RNCC: 3 | RNVC: 2
EF3113: RNCC: 5 | RNVC: 2
KDAW9995-13: RNCC: 5 | RNVC: 9
EF3113: RNCC: 5 | RNVC: 9
1687965013: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-312-7489
Hand Terminal Crimping Tool

123127489
901250: RNCC: 3 | RNVC: 2
PZ4: RNCC: 5 | RNVC: 2
0015380630: RNCC: 5 | RNVC: 2

2 Feb 1988

5120-12-379-1975
Hand Beading Tool

123791975
105-42322W3: RNCC: 3 | RNVC: 2

2 Jul 2009

5120-12-177-5052
Spanner Wrench

121775052
700503-9002W5: RNCC: 3 | RNVC: 2
700503-9002W5: RNCC: 5 | RNVC: 9

5 Feb 1979

5120-12-368-7514
Socket Wrench Set

123687514
870-MU: RNCC: 3 | RNVC: 2
00.47.94.41: RNCC: 5 | RNVC: 2

12 Apr 2006

5120-12-364-4729
Torque Wrench Adapter

123644729
02181009-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-364-3118
Socket Wrench Extension

123643118
11011001-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5120-12-350-7736
Spanner Wrench

123507736
961380: RNCC: 3 | RNVC: 2

18 May 2000

5120-12-393-7313
Mecha Ejector Tool

123937313
8452331203: RNCC: 3 | RNVC: 2

7 Oct 2013

5120-12-318-2890
Mechanical Puller Attachment

123182890
116589063400: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-12-171-2461
Socket Wrench Socket

121712461
1X56 136 813: RNCC: 3 | RNVC: 2
1X56136813: RNCC: 5 | RNVC: 2

21 Sep 1977

5120-12-319-3081
Socket Head Screw Key

123193081
000.081.46565: RNCC: 3 | RNVC: 2
334-2,5X200: RNCC: 3 | RNVC: 2
906Q-2,5: RNCC: 3 | RNVC: 2
46110: RNCC: 5 | RNVC: 2
906Q46110: RNCC: 5 | RNVC: 2

21 Sep 1989

5120-12-161-6709
Lamp Extractor

121616709
40071328723: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-131-7706
Spanner Wrench

121317706
AWENTW2544A40: RNCC: 3 | RNVC: 2
AWENTW2544A40: RNCC: 5 | RNVC: 2
AWENTW2544A40: RNCC: 5 | RNVC: 2
AWENTW2544A40: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-3084
Schluessel

121393084
8205893707: RNCC: 3 | RNVC: 2
023M03700: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-139-3083

5120-12-192-8055
Bearing And Bushing Inserter

121928055
305 589 00 15 00: RNCC: 3 | RNVC: 2
305589001500: RNCC: 3 | RNVC: 2

26 May 1982

5120-12-306-4038
Aligning Punch

123064038
4900059-751750.000.0: RNCC: 3 | RNVC: 2

26 Feb 1986

5120-12-322-0331
Ge Montierwerkzeug

123220331
220 299.0: RNCC: 3 | RNVC: 2
NO. 220.299.0: RNCC: 5 | RNVC: 2
947.97.500.01.2: RNCC: 5 | RNVC: 2

19 Jul 1990

5120-12-172-8742
Eastern Pattern Scoop

121728742
61888: RNCC: 3 | RNVC: 9

27 Feb 1978

5120-12-330-9676
Socket Wrench Socket

123309676
8531631-11: RNCC: 3 | RNVC: 2

4 Mar 1993

5120-12-155-9541
Cross Tip Screwdriver

121559541
M257-11: RNCC: 3 | RNVC: 2
M257-11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-127-2772
Auszieher

121272772
83.09143-6053: RNCC: 3 | RNVC: 2
83091436053: RNCC: 3 | RNVC: 2
WL57BW: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-171-3135
Auflage

121713135
VG95211-ML-121713135: RNCC: 2 | RNVC: 2
105-31702W12.01: RNCC: 3 | RNVC: 2
105-31702W12-01: RNCC: 5 | RNVC: 2

29 Sep 1977

5120-12-323-0448
Hand Hammer

123230448
653A102-18: RNCC: 3 | RNVC: 9
653A10218: RNCC: 5 | RNVC: 9

18 Oct 1990

5120-12-189-5930
Socket Head Screw Key

121895930
4900168-400: RNCC: 3 | RNVC: 2

7 Oct 1981

5120-12-365-9185
Socket Wrench

123659185
T4840X 30: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-12-388-8087
Leveling-Support Jack

123888087
26015986: RNCC: 3 | RNVC: 2

24 Apr 2012

5120-12-153-7941
Schluessels Bolzen

121537941
CH1775-7: RNCC: 3 | RNVC: 2
839589340700: RNCC: 5 | RNVC: 2
CH1775-7: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-324-7007
Hand Rivet Set

123247007
VN208-4: RNCC: 3 | RNVC: 2
NV1-030583-4: RNCC: 5 | RNVC: 2

18 Mar 1991

5120-12-176-2821
Dorn

121762821
23290-268180.000: RNCC: 2 | RNVC: 2
23290-268180.000: RNCC: 3 | RNVC: 2
23290-268180: RNCC: 5 | RNVC: 9

23 Nov 1978

5120-12-145-7094
Spanner Wrench

121457094
K2647: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-353-8482
Socket Wrench

123538482
001589460900: RNCC: 3 | RNVC: 2
001589460900: RNCC: 5 | RNVC: 2
001589460900: RNCC: 5 | RNVC: 2

15 May 2001

5120-12-092-2293

5120-12-092-4415

5120-12-363-2948
Piston Inserter

123632948
F6348805: RNCC: 3 | RNVC: 2

20 May 2004

5120-12-140-2283

5120-12-317-9131
Pliers

123179131
0901180: RNCC: 3 | RNVC: 9
TVA5120-2-263-004-1.1.1: RNCC: 5 | RNVC: 2

24 May 1989

5120-12-306-4037
Tap And Reamer Extension

123064037
14929-14,5: RNCC: 3 | RNVC: 2

26 Feb 1986

5120-12-133-3460
Socket Wrench Handle Bar

121333460
3.415.0.018.013.4: RNCC: 3 | RNVC: 2
1205 1841: RNCC: 5 | RNVC: 2
A26-50-28-3: RNCC: 5 | RNVC: 9
A26-50-28-3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-330-7376
Flat Tip Screwdriver

123307376
DA51: RNCC: 3 | RNVC: 9

2 Feb 1993

5120-12-315-7639
Socket Head Screw Key

123157639
334-71: RNCC: 3 | RNVC: 2

25 Nov 1988

5120-12-358-1995
Screw Extractor

123581995
69014: RNCC: 3 | RNVC: 2
690 14: RNCC: 5 | RNVC: 2

25 Sep 2002

5120-12-364-6133
Socket Wrench Crowfoot Attachment

123646133
02190021-TCS: RNCC: 3 | RNVC: 2

14 Oct 2004

5120-12-156-1018
Adapter

121561018
25704-360830.00.0: RNCC: 3 | RNVC: 2
03135: RNCC: 3 | RNVC: 2
25704-360830-00-0: RNCC: 5 | RNVC: 2
03135: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-372-1247
Pliers

123721247
DUMMYALN0254: RNCC: 3 | RNVC: 2
EFT-0254: RNCC: 5 | RNVC: 2

20 Jun 2007

5120-12-368-2114
Socket Head Screw Key

123682114
DIN65253-5: RNCC: 2 | RNVC: 2
42 X 5: RNCC: 3 | RNVC: 2
4010886635001: RNCC: 5 | RNVC: 2
6350060: RNCC: 5 | RNVC: 2

9 Jan 2006

5120-12-190-3676
Socket Wrench Handle Bar

121903676
MKV1150/4501.01.02.17: RNCC: 3 | RNVC: 2

24 Nov 1981

5120-12-126-4648
Flat Tip Screwdriver

121264648
C20407-A7-A29: RNCC: 3 | RNVC: 2
C20407A7A29: RNCC: 5 | RNVC: 2
C20407A7A29: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-193-0260
Hand Shovel

121930260
NM 643-02: RNCC: 3 | RNVC: 2
NM643-02: RNCC: 5 | RNVC: 2
NM 643-02: RNCC: 5 | RNVC: 9
NM643-02: RNCC: 5 | RNVC: 9

15 Jun 1982

5120-12-154-1018
Open End Box Wrench

121541018
CH2267-10NM: RNCC: 3 | RNVC: 2
839589070300: RNCC: 5 | RNVC: 2
CH2267-10NM: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-386-7684
Hydra Removal Tool

123867684
895-038-599: RNCC: 3 | RNVC: 2

28 Sep 2011

5120-12-364-4718
Socket Wrench Ratchet Attachment

123644718
12140000-TCS: RNCC: 3 | RNVC: 2

30 Sep 2004

5120-12-382-5768
Socket Wrench Socket

123825768
02110008-TCS: RNCC: 3 | RNVC: 2

12 Jul 2010

5120-12-382-8750
Mounting Punch

123828750
950589026300: RNCC: 3 | RNVC: 2

18 Aug 2010

5120-12-364-6762
Cross Tip Screwdriver

123646762
48301004-TCS: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-12-357-7718
Ausbeulwerkzeugsatz

123577718
191: RNCC: 3 | RNVC: 2

22 Jul 2002

5120-12-351-3428
Hand Terminal Crimping Tool

123513428
235-6428: RNCC: 3 | RNVC: 2

17 Jul 2000

5120-12-142-0286

5120-12-311-0939
Seal Inserter

123110939
387589071500: RNCC: 3 | RNVC: 2
387 589 07 15 00: RNCC: 5 | RNVC: 2

24 Jul 1987

5120-12-304-3536
Bearing And Bushing Inserter

123043536
460589023100: RNCC: 3 | RNVC: 2

10 Jul 1985

5120-12-312-2169
Eindrueckwerkzeugsa

123122169
30-204: RNCC: 3 | RNVC: 2
30-204/MATRA: RNCC: 5 | RNVC: 2

4 Dec 1987

5120-12-123-4842
Open End Wrench

121234842
DIN133-75: RNCC: 2 | RNVC: 2
2300-75: RNCC: 3 | RNVC: 2
133-75: RNCC: 3 | RNVC: 2
452-75: RNCC: 3 | RNVC: 2
75DIN133: RNCC: 5 | RNVC: 2
860N0310: RNCC: 5 | RNVC: 9
571A301-75: RNCC: 5 | RNVC: 9
1102110012: RNCC: 5 | RNVC: 9
50590: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-121-6975
Shovel Handle

121216975
NO PRIMARY REF 12-121-6975: RNCC: 3 | RNVC: 2
AE-800DIN20152-ES: RNCC: 5 | RNVC: 9
AE800DIN20152ESCHE: RNCC: 5 | RNVC: 9
DIN20152-AE800ESCHE: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-326-5300
Bearing And Bushing Inserter

123265300
4900344: RNCC: 3 | RNVC: 2

1 Oct 1991

5120-12-181-2514
Piston Ring Compressor

121812514
794U-3: RNCC: 3 | RNVC: 2
80.99625.0001: RNCC: 5 | RNVC: 2
5753630006: RNCC: 5 | RNVC: 2
036343: RNCC: 5 | RNVC: 2
80996250001: RNCC: 5 | RNVC: 2
71076-04130: RNCC: 5 | RNVC: 2
000589206100: RNCC: 5 | RNVC: 2
794U3: RNCC: 5 | RNVC: 2

7 Nov 1979

5120-12-380-2844
Screwdriver Bit

123802844
00579: RNCC: 3 | RNVC: 2
269-PH000-PH00: RNCC: 5 | RNVC: 2

15 Oct 2009

5120-12-145-1014
Montagevorrichtung

121451014
837589306300: RNCC: 3 | RNVC: 2
8375893063/00: RNCC: 5 | RNVC: 2
8375891663: RNCC: 5 | RNVC: 2
8375893063: RNCC: 5 | RNVC: 2
8375893063/00: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-171-5366
Spanner Wrench

121715366
1238-06.2W4: RNCC: 3 | RNVC: 2
1238-06-2W4: RNCC: 5 | RNVC: 2
1238-06.2W4: RNCC: 5 | RNVC: 9
1238-06-2W4: RNCC: 5 | RNVC: 9

21 Oct 1977

5120-12-126-2238
Typewriter Repair Pliers

121262238
NO PRIMARY REF 12-126-2238: RNCC: 3 | RNVC: 2
W48: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-389-8123
Schloszoe Werkzeug

123898123
KV3061: RNCC: 3 | RNVC: 2

27 Aug 2012

5120-12-392-7410
Open End Box Wrench

123927410
SEWZG014: RNCC: 3 | RNVC: 2

3 Jul 2013

5120-12-176-9524
Chain Type Ratchet Lever Puller

121769524
50423: RNCC: 3 | RNVC: 2

3 Jan 1979

5120-12-126-2164

5120-12-364-2922
Zange Einsatz

123642922
69760001-TCS: RNCC: 3 | RNVC: 2

8 Sep 2004

5120-12-351-9558
Socket Head Screw Key

123519558
ISO2936-0,7: RNCC: 2 | RNVC: 2

20 Sep 2000

5120-12-379-3840
Hand Hydraulic Jack

123793840
693.04-1: RNCC: 3 | RNVC: 2

17 Jul 2009

5120-12-131-5824
Dreidornz Dornsatz

121315824
ERSATZDORNSATZ NA-1 K/3: RNCC: 3 | RNVC: 2
ERSATZDORNSATZNA1K3: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-163-6631
Spanner Wrench

121636631
26-21C1361G001: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-126-3322
Hand Hammer

121263322
470BSB100: RNCC: 3 | RNVC: 2
470BSB100: RNCC: 3 | RNVC: 9
226-100MST: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-7692
Torque Wrench Multiplier

121997692
8602-21: RNCC: 3 | RNVC: 2
8602-21: RNCC: 5 | RNVC: 9
770140: RNCC: 5 | RNVC: 9

29 May 1984

5120-12-340-4884
Electronic Equipment Alignment Tool

123404884
1-554: RNCC: 3 | RNVC: 2

23 Apr 1996

5120-12-134-2679
Torque Wrench Multiplier

121342679
IP15.4KRS-U: RNCC: 3 | RNVC: 2
2364LW750: RNCC: 3 | RNVC: 2
3IP220: RNCC: 5 | RNVC: 2
0005893763: RNCC: 5 | RNVC: 2
000589376300: RNCC: 5 | RNVC: 2
0005893763: RNCC: 5 | RNVC: 2
F30005695: RNCC: 5 | RNVC: 2
F362450005695: RNCC: 5 | RNVC: 2
000589376300: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-023-0173

5120-12-191-4640
Lamp Extractor

121914640
ZG4105G001: RNCC: 3 | RNVC: 2
ZG4105G001: RNCC: 5 | RNVC: 9

4 Feb 1982

5120-12-021-7294

5120-12-130-7792

5120-12-170-2609

5120-12-383-4699
Spanner Wr Adapter

123834699
584.01-059112-002: RNCC: 3 | RNVC: 2
642902: RNCC: 5 | RNVC: 2

25 Oct 2010

5120-12-183-0986
Face Spanner Wrench Socket

121830986
5870656005: RNCC: 3 | RNVC: 2
4198525: RNCC: 3 | RNVC: 2
8208611: RNCC: 5 | RNVC: 2
8410700: RNCC: 5 | RNVC: 2
5870 656 005: RNCC: 5 | RNVC: 2
2250300: RNCC: 5 | RNVC: 2

20 Mar 1980

5120-12-302-8977
Spanner Wrench

123028977
4-128889: RNCC: 3 | RNVC: 2

6 Feb 1985

5120-12-196-7394
Mechanical Puller

121967394
1X56136505: RNCC: 3 | RNVC: 2

9 Aug 1983

5120-12-010-1982

5120-12-304-5220
Open End Box Wrench

123045220
1949M6X7: RNCC: 3 | RNVC: 2
1949M-6-7: RNCC: 5 | RNVC: 2
130452: RNCC: 5 | RNVC: 2

26 Jul 1985

5120-12-314-9582
Spanner Wrench

123149582
P-0-722A: RNCC: 3 | RNVC: 2
P-0-722: RNCC: 5 | RNVC: 9

1 Sep 1988

5120-12-147-3204
Dorn

121473204
1X46914901: RNCC: 3 | RNVC: 2
V91490-1: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-362-6807
Auswechselwe Griff

123626807
4000A-930172.000.0: RNCC: 3 | RNVC: 2

18 Mar 2004

5120-12-041-5741

5120-12-325-8806
Mechanical Puller

123258806
312589143300: RNCC: 3 | RNVC: 2

17 Jul 1991

5120-12-174-3207
Crimping Tool Die

121743207
FA0010-31: RNCC: 3 | RNVC: 2
FA0010-31: RNCC: 5 | RNVC: 9

21 Jun 1978

5120-12-177-7641
Auszieher

121777641
VG95211-ML-121777641: RNCC: 2 | RNVC: 2
TM0-051078: RNCC: 3 | RNVC: 2

19 Feb 1979

5120-12-183-9563
Spanner Wrench

121839563
2500075-971000.000.0: RNCC: 2 | RNVC: 2
2500075-971000.000.0: RNCC: 3 | RNVC: 2
5120121839563: RNCC: 5 | RNVC: 2
2500075-971000-000-0: RNCC: 5 | RNVC: 9
2500075-971000.000-0: RNCC: 5 | RNVC: 9
2500075-971000.000.0: RNCC: 5 | RNVC: 9

7 Jun 1980

5120-12-385-8732
Flat Tip And Cross Tip Screwdriver Set

123858732
05018283001: RNCC: 3 | RNVC: 2
932S/6: RNCC: 5 | RNVC: 2
442-0616: RNCC: 5 | RNVC: 2

18 Jul 2011

5120-12-182-4999
Spreitzstueck

121824999
7570131000A: RNCC: 3 | RNVC: 2

8 Feb 1980

5120-12-369-7374
Solid Center Punch

123697374
431 120 0: RNCC: 3 | RNVC: 2
4311200: RNCC: 5 | RNVC: 2
00.08.73.00: RNCC: 5 | RNVC: 2

14 Aug 2006

5120-12-369-1890
Drive Pin Punch Set

123691890
424 120 0: RNCC: 3 | RNVC: 2
00.07.98.22: RNCC: 5 | RNVC: 2

1 Jun 2006

5120-12-371-2547
Screwdriver Bit Set And Handle

123712547
2262/7: RNCC: 3 | RNVC: 2

7 Mar 2007

5120-12-356-7427
Mechanical Puller Set

123567427
69-A: RNCC: 3 | RNVC: 2

28 Mar 2002

5120-12-135-2054
Screwdriver Bit

121352054
850H5-5-2: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-362-6549
Screwdriver Bit

123626549
54.0084.960.85: RNCC: 3 | RNVC: 2
13010-8: RNCC: 5 | RNVC: 2

16 Mar 2004

5120-12-374-7968
Socket Wrench Socket

123747968
4680-1: RNCC: 3 | RNVC: 2

25 Mar 2008

5120-12-123-5367
Socket Wrench

121235367
NO PRIMARY REF 12-123-5367: RNCC: 3 | RNVC: 2
1245-0-2: RNCC: 5 | RNVC: 2
26-10X14: RNCC: 5 | RNVC: 9
26-10X14: RNCC: 5 | RNVC: 9
26-10X14: RNCC: 5 | RNVC: 9
212202: RNCC: 5 | RNVC: 9
A10X14DIN896: RNCC: 5 | RNVC: 9
DIN896-A10X14: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-123-5175
Open End Wrench

121235175
NO PRIMARY REF 12-123-5175: RNCC: 3 | RNVC: 2
1931Z3-4: RNCC: 5 | RNVC: 9
104981: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-139-3151

5120-12-376-8019
Inspection Mirror

123768019
EFIS100: RNCC: 3 | RNVC: 2

10 Nov 2008

5120-12-377-5987
Spanner Wrench

123775987
314946: RNCC: 3 | RNVC: 2
0859-03-11-00/37: RNCC: 5 | RNVC: 2

28 Jan 2009

5120-12-362-5248
Combination Box And Open End Wrench

123625248
13A-15/64: RNCC: 3 | RNVC: 2
40481515: RNCC: 5 | RNVC: 2

4 Mar 2004

5120-12-147-6743
Socket Wrench

121476743
895-7,5: RNCC: 3 | RNVC: 2
895-7-5: RNCC: 5 | RNVC: 9
200-7-5: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-174-9824
Face Spanner Wrench Socket

121749824
3S55176-0000: RNCC: 3 | RNVC: 2

15 Aug 1978

5120-12-331-5954
Aligning Punch

123315954
100700: RNCC: 3 | RNVC: 2
100 700: RNCC: 5 | RNVC: 2
91775237: RNCC: 5 | RNVC: 2
100 700: RNCC: 5 | RNVC: 9

25 May 1993

5120-12-361-2588
Retaining Ring Pliers Set

123612588
96593621: RNCC: 3 | RNVC: 2

10 Sep 2003

5120-12-313-5557
Stud Remover

123135557
2300223-264060.00.0: RNCC: 2 | RNVC: 2
2300223-264060.00.0: RNCC: 3 | RNVC: 2

15 Apr 1988

5120-12-365-0112
Socket Wrench

123650112
6-617: RNCC: 3 | RNVC: 2

23 Nov 2004

5120-12-347-1804
Woven Cable Grip

123471804
18000028: RNCC: 3 | RNVC: 2

10 Nov 1998

5120-12-325-5350
Ge Montierwerkzeug

123255350
8353397: RNCC: 3 | RNVC: 2

14 Jun 1991

5120-12-181-8127
Driftpin

121818127
2533A: RNCC: 3 | RNVC: 9
VW133A: RNCC: 3 | RNVC: 9

17 Dec 1979

5120-12-371-3645
Socket Wrench Screwdriver Attachment

123713645
3510-IN 5: RNCC: 3 | RNVC: 2
00.47.18.62: RNCC: 5 | RNVC: 2

20 Mar 2007

5120-12-385-9718
Socket Head Screw Key Set

123859718
988496: RNCC: 3 | RNVC: 2
62669 8 KOMBI: RNCC: 5 | RNVC: 2

26 Jul 2011

5120-12-146-7394

5120-12-169-3446
Socket Wrench

121693446
60487100: RNCC: 3 | RNVC: 2

6 May 1977

5120-12-371-0045
Torque Wrench

123710045
26461: RNCC: 3 | RNVC: 2
28521100: RNCC: 5 | RNVC: 9

25 Jan 2007

5120-12-359-3697
Inspection Mirror

123593697
SAFE C: RNCC: 3 | RNVC: 2

28 Jan 2003

5120-12-383-8407
Offset Screwdriver

123838407
0831300C: RNCC: 3 | RNVC: 2

13 Dec 2010

5120-12-392-6448
Socket Wrench Screwdriver Attachment

123926448
2740: RNCC: 3 | RNVC: 2
905.3.15.105.1: RNCC: 5 | RNVC: 2
4000896050093: RNCC: 5 | RNVC: 2
905.3.15.105.1: RNCC: 5 | RNVC: 2

26 Jun 2013

5120-12-391-0171
Rotating Members Aligning Tool

123910171
F6552506: RNCC: 3 | RNVC: 2

15 Jan 2013

5120-12-394-6140
Socket Wrench Socket

123946140
25262: RNCC: 3 | RNVC: 2

18 Dec 2013

5120-12-368-4478
Torque Wrench

123684478
6391-35: RNCC: 3 | RNVC: 2

13 Mar 2006

5120-12-303-4727
Rohrbieger Rolle

123034727
BAV 6/12 BIEGEROLLE ROHRD 6MM: RNCC: 3 | RNVC: 2

26 Mar 1985

5120-12-129-3307
Open End Wrench

121293307
350-BSW3/16X1/4: RNCC: 3 | RNVC: 2
035706: RNCC: 3 | RNVC: 2
6-3-16X1-4W: RNCC: 3 | RNVC: 2
6-3/16X1/4W: RNCC: 3 | RNVC: 2
TVA5120-2-263-028: RNCC: 5 | RNVC: 1
TVA5120-2-263-028-1.1.31: RNCC: 5 | RNVC: 2
10E3/16X1/4: RNCC: 5 | RNVC: 9
6-3-16X1-4: RNCC: 5 | RNVC: 9
450W3-16X1-4: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-344-7450
Torque Wrench Adapter

123447450
731/A/10-5/16: RNCC: 3 | RNVC: 2

3 Dec 1997

5120-12-139-8582
Dorn

121398582
3125891239: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-133-6836
Electron Tube Extractor

121336836
C40407-A22-A2: RNCC: 3 | RNVC: 2
RELWZ22B: RNCC: 5 | RNVC: 2
RELWZ22B: RNCC: 5 | RNVC: 9
1.6369.298: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-342-6786
Ratchet Wrench

123426786
25-17X19: RNCC: 3 | RNVC: 2
41131719: RNCC: 5 | RNVC: 2

13 Mar 1997

5120-12-152-6904
Chain Type Ratchet Lever Puller

121526904
399025-971325: RNCC: 2 | RNVC: 2
YALE6000/2: RNCC: 3 | RNVC: 2
6000/2: RNCC: 5 | RNVC: 2
6000/2: RNCC: 5 | RNVC: 9
YALE6000/2: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-364-3472
Combination Box And Open End Wrench

123643472
40081414-TCS: RNCC: 3 | RNVC: 2

14 Sep 2004

5120-12-192-5809
Stift

121925809
1X56137244: RNCC: 3 | RNVC: 2

5 May 1982

5120-12-315-1065
Handling Tool Arm

123151065
2300231-262100.000.0: RNCC: 2 | RNVC: 2
2300231-262100.000.0: RNCC: 3 | RNVC: 2

16 Sep 1988

5120-12-384-6054
Hand Terminal Crimping Tool

123846054
97 90 05: RNCC: 3 | RNVC: 2
4003773025535: RNCC: 5 | RNVC: 2

11 Mar 2011

5120-12-023-1404

5120-12-387-2588
Socket Wrench Socket

123872588
001.767: RNCC: 3 | RNVC: 2

21 Nov 2011

5120-12-350-1001
Detent Handling Tool

123501001
AFG072125-01: RNCC: 3 | RNVC: 2

15 Feb 2000

5120-12-133-3961
Screwdriver Bit

121333961
NO PRIMARY REF 12-133-3961: RNCC: 3 | RNVC: 2
109044: RNCC: 5 | RNVC: 9
6988M2: RNCC: 5 | RNVC: 9
6988M4-2X0-75: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-380-3048
Socket Head Screw Key Set

123803048
0502424001: RNCC: 3 | RNVC: 2
967 PKL/9 TORX: RNCC: 5 | RNVC: 2
967PKL/9TORX: RNCC: 5 | RNVC: 2

19 Oct 2009

5120-12-310-8889
Spanner Wrench

123108889
363589003100: RNCC: 3 | RNVC: 2

6 Jul 1987

5120-12-387-3309
Torque Screwdriver

123873309
249029: RNCC: 3 | RNVC: 2

29 Nov 2011

5120-12-388-6286
Mounting Too Guide

123886286
021.032: RNCC: 3 | RNVC: 2
021.032: RNCC: 5 | RNVC: 2

5 Apr 2012

5120-12-333-8533
Mechanical Puller

123338533
312589303300: RNCC: 3 | RNVC: 2

17 Feb 1994

5120-12-335-4085
Mechanical Puller

123354085
0851 6838: RNCC: 3 | RNVC: 2
8516838: RNCC: 5 | RNVC: 2

17 Aug 1994

5120-12-186-7319
Spanner Wrench

121867319
99354205: RNCC: 3 | RNVC: 2
420050: RNCC: 5 | RNVC: 9
420050: RNCC: 5 | RNVC: 9

2 Feb 1981

5120-12-093-7796

5120-12-195-6067
Dreh Winkelscheibe

121956067
837589015900: RNCC: 3 | RNVC: 2

16 Mar 1983

5120-12-174-4094
Schluessel

121744094
NO PRIMARY REF 12-174-4094: RNCC: 3 | RNVC: 2
2596: RNCC: 5 | RNVC: 9

29 Jun 1978

5120-12-375-7035
Socket Head Screw Key

123757035
21.7381-00-50-00.00-17: RNCC: 3 | RNVC: 2
H31438: RNCC: 5 | RNVC: 2

25 Jun 2008

5120-12-362-4589
Combination Box And Open End Wrench

123624589
54.0084.960.44: RNCC: 3 | RNVC: 2
13-10: RNCC: 5 | RNVC: 2

26 Feb 2004

5120-12-181-2108
Hand Hammer

121812108
261: RNCC: 3 | RNVC: 2

31 Oct 1979

5120-12-146-1115
Tu Fuehrungsbolzen

121461115
25704-360300.01.0: RNCC: 2 | RNVC: 2
25704-360300-01-0: RNCC: 3 | RNVC: 2
25704-360300.01.0: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-373-4623
Socket Head Screw Key

123734623
0613 131 05: RNCC: 3 | RNVC: 2

6 Nov 2007

5120-12-123-5087

5120-12-184-9727
Spanner Wrench

121849727
709162-8001W1: RNCC: 3 | RNVC: 2
709162-8001W1: RNCC: 5 | RNVC: 9

28 Aug 1980

5120-12-319-9818
Rivet Bucking Bar

123199818
763: RNCC: 3 | RNVC: 2

24 Nov 1989

5120-12-181-7431
Abziehscheibe

121817431
3574975: RNCC: 3 | RNVC: 2

14 Dec 1979

5120-12-377-3122
Trench Brace

123773122
063408: RNCC: 3 | RNVC: 2

7 Jan 2009

5120-12-140-7424
Flat Tip Screwdriver

121407424
R18830: RNCC: 3 | RNVC: 2
R18830: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-196-7851
Ratchet Wrench

121967851
RBM910SA: RNCC: 3 | RNVC: 2
RBM910S: RNCC: 5 | RNVC: 9

16 Aug 1983

5120-12-387-7022
Valve Spring Compressor

123877022
F30377634: RNCC: 3 | RNVC: 2

25 Jan 2012

5120-12-330-1531
Socket Wrench

123301531
0852 3057.003: RNCC: 3 | RNVC: 2
8523057.003: RNCC: 5 | RNVC: 2

10 Nov 1992

5120-12-134-2745
Socket Wrench

121342745
023M06800: RNCC: 3 | RNVC: 2
VM55685: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-346-0799
Hand Tube Flaring Tool

123460799
150110: RNCC: 3 | RNVC: 2

8 Jun 1998

5120-12-313-4259
Auswechselwe Griff

123134259
80996170054: RNCC: 3 | RNVC: 2
80.99617.0054: RNCC: 5 | RNVC: 2

30 Mar 1988

5120-12-124-4857

5120-12-341-0745
Eindrueckwerkzeug

123410745
80996040104: RNCC: 3 | RNVC: 2
1X56137452: RNCC: 5 | RNVC: 2

25 Jul 1996

5120-12-343-5194
Vise Jaw Caps

123435194
HASALU-135OF: RNCC: 3 | RNVC: 2
51069040: RNCC: 3 | RNVC: 2
51069/040: RNCC: 5 | RNVC: 9

1 Jul 1997

5120-12-192-4375
Durchdrehhebel Mit

121924375
CH1778/1: RNCC: 3 | RNVC: 2
590589046100: RNCC: 5 | RNVC: 2
590589046100: RNCC: 5 | RNVC: 2
5905890461/00: RNCC: 5 | RNVC: 2
590589046100: RNCC: 5 | RNVC: 2
CH1778/1: RNCC: 5 | RNVC: 9

26 Apr 1982

5120-12-343-7076
Socket Wrench Set

123437076
45A/19/9: RNCC: 3 | RNVC: 2
96024107: RNCC: 5 | RNVC: 2
965 12 160: RNCC: 5 | RNVC: 2

16 Jul 1997

5120-12-307-4004
Driftpin

123074004
M514047-44: RNCC: 3 | RNVC: 2

12 Jun 1986

5120-12-305-8599
We Montierwerkzeug

123058599
4900059-752060.000.0: RNCC: 2 | RNVC: 2
4900059-752060.000.0: RNCC: 3 | RNVC: 2

27 Dec 1985

5120-12-132-0157
Schaekeloeffner

121320157
5120-031ITEMA: RNCC: 2 | RNVC: 2
50: RNCC: 3 | RNVC: 2

30 May 1969

5120-12-150-6197
Spanner Wrench

121506197
23176-264450.00.0: RNCC: 2 | RNVC: 2
23176-264450-00-0: RNCC: 2 | RNVC: 2
23176-264450-00-0: RNCC: 5 | RNVC: 2
23176-264450.00.0: RNCC: 5 | RNVC: 2
23176-264450-00-0: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-189-8176
Torque Wrench Adapter

121898176
2300109-990940.001.0: RNCC: 2 | RNVC: 2
2300109-990940.001.0: RNCC: 3 | RNVC: 2
2300109-990940.001.0: RNCC: 3 | RNVC: 2
2300109-990940-001-0: RNCC: 5 | RNVC: 2

21 Oct 1981

5120-12-171-3441
Flat Tip Screwdriver

121713441
8060-0-5X3X100: RNCC: 3 | RNVC: 9
139963: RNCC: 5 | RNVC: 2
8060-3X100: RNCC: 5 | RNVC: 9

30 Sep 1977

5120-12-090-1447

5120-12-190-4580
Socket Wrench Set

121904580
7440M: RNCC: 3 | RNVC: 2
109593: RNCC: 5 | RNVC: 2

26 Nov 1981

5120-12-316-6424
Mechanical Puller

123166424
401589123300: RNCC: 3 | RNVC: 2

30 Jan 1989

5120-12-390-4525
Socket Wrench

123904525
3201.15.9165L200: RNCC: 3 | RNVC: 2

14 Nov 2012

5120-12-322-9567
Lamp Cap Extractor

123229567
08850: RNCC: 3 | RNVC: 2
08850: RNCC: 3 | RNVC: 9

11 Oct 1990

5120-12-352-3333
Drive Pin Punch

123523333
22015.0.00.100.00P0S.1: RNCC: 3 | RNVC: 2

8 Nov 2000

5120-12-352-3332
Drive Pin Punch

123523332
22015.0.00.101.00: RNCC: 3 | RNVC: 2

8 Nov 2000

5120-12-368-9151
Schluessel

123689151
598101-990000.020.0: RNCC: 3 | RNVC: 2

5 May 2006

5120-12-337-8347
Open End Wrench

123378347
1500.730.1: RNCC: 3 | RNVC: 2

19 Apr 1995

5120-12-121-1222
Offset Screwdriver

121211222
2047-10: RNCC: 3 | RNVC: 2
106049: RNCC: 5 | RNVC: 2
2047 1,6X10X175: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-135-0029
Mechanical Puller

121350029
4526-2: RNCC: 3 | RNVC: 2
12-2: RNCC: 3 | RNVC: 2
108178: RNCC: 5 | RNVC: 2
248177: RNCC: 5 | RNVC: 9
940-11: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-199-2102

5120-12-355-0203
Bearing And Bushing Inserter And Remover

123550203
J53233750-001C532-01: RNCC: 3 | RNVC: 2
4920-24756: RNCC: 6 | RNVC: 9

24 Sep 2001

5120-12-374-6397
Mecha Ejector Tool

123746397
5075890125/00: RNCC: 3 | RNVC: 2

3 Mar 2008

5120-12-155-9380
Socket Head Screw Key

121559380
NM290-69: RNCC: 3 | RNVC: 2
NM290-69: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-359-3728
Bearing And Bushing Inserter

123593728
VTR173-03-01: RNCC: 3 | RNVC: 2

29 Jan 2003

5120-12-194-7411
Face Spanner Wrench Socket

121947411
000 941 7034: RNCC: 3 | RNVC: 2
0009417034: RNCC: 3 | RNVC: 2

1 Dec 1982

5120-12-010-9664

5120-12-168-6478
Socket Head Screw Key

121686478
4900071-013000: RNCC: 3 | RNVC: 2
4900071-013000: RNCC: 5 | RNVC: 2
105112U: RNCC: 5 | RNVC: 9

25 Mar 1977

5120-12-126-2997
Machinist's Vise

121262997
NO PRIMARY REF 12-126-2997: RNCC: 3 | RNVC: 2
C70DIN5115: RNCC: 5 | RNVC: 9
DIN5115-C70: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-301-4557
Socket Wrench Handle

123014557
NO PRIMARY REF 12-301-4557: RNCC: 3 | RNVC: 2
7494: RNCC: 5 | RNVC: 9

16 Oct 1984

5120-12-151-5396
Hydraulis Abzieher

121515396
2360-264180.00.0: RNCC: 2 | RNVC: 2
2360-264180.00.0: RNCC: 3 | RNVC: 2
2360-264180-00-0: RNCC: 5 | RNVC: 2
2360-264180.00.0: RNCC: 5 | RNVC: 2
2360-264180-00-0: RNCC: 5 | RNVC: 2
2360-264180-00-0: RNCC: 5 | RNVC: 9
2360-264180.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-349-3749
Socket Head Screw Key

123493749
6-903: RNCC: 3 | RNVC: 2
353-3,0X75: RNCC: 3 | RNVC: 2
05023110001: RNCC: 3 | RNVC: 2
354-3,0X75: RNCC: 5 | RNVC: 9
023110: RNCC: 5 | RNVC: 9

5 Nov 1999

5120-12-310-9009
Mechanical Puller Step Plate

123109009
387589016300: RNCC: 3 | RNVC: 2

7 Jul 1987

5120-12-190-5614
Fuehrungsbuechse

121905614
412160: RNCC: 3 | RNVC: 2

2 Dec 1981

5120-12-369-9007
Socket Wrench Socket

123699007
50-34: RNCC: 3 | RNVC: 2
50-12-34: RNCC: 3 | RNVC: 2
03010034: RNCC: 5 | RNVC: 2
00050003483: RNCC: 5 | RNVC: 2

24 Aug 2006

5120-12-123-5450
Socket Wrench

121235450
3359004002: RNCC: 3 | RNVC: 2
023E002-14: RNCC: 3 | RNVC: 2
A11402: RNCC: 5 | RNVC: 2
3303985: RNCC: 5 | RNVC: 2
583303985: RNCC: 5 | RNVC: 2
583303985: RNCC: 5 | RNVC: 9
583303985: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-196-6260
Socket Wrench

121966260
NO PRIMARY REF 12-196-6260: RNCC: 3 | RNVC: 2
48-C-MM21: RNCC: 5 | RNVC: 9
48-21: RNCC: 5 | RNVC: 9
48-C-MM21: RNCC: 5 | RNVC: 9

25 Jul 1983

5120-12-333-7527
Retaining Ring Pliers

123337527
131560: RNCC: 3 | RNVC: 2
E7125-00-01: RNCC: 5 | RNVC: 2
3-119-KHD: RNCC: 5 | RNVC: 2

1 Feb 1994

5120-12-373-1028
Craftsman's Tweezers

123731028
923437: RNCC: 3 | RNVC: 2

27 Sep 2007

5120-12-308-4002
Mechanical Puller

123084002
2500096-360276.00.0: RNCC: 2 | RNVC: 2
2500096-360276.00.0: RNCC: 3 | RNVC: 2
2500096-360276.00.0: RNCC: 5 | RNVC: 2

6 Oct 1986

5120-12-151-8443

5120-12-176-7328
Gegenlager

121767328
VG95211-ML-121767328: RNCC: 2 | RNVC: 2
105-41121W1.02: RNCC: 3 | RNVC: 2
105-41121W1-02: RNCC: 5 | RNVC: 2

15 Dec 1978

5120-12-390-0450
Door Lock Open Tool

123900450
KV1058: RNCC: 3 | RNVC: 2

27 Sep 2012

5120-12-126-2093

5120-12-149-5833
Socket Wrench

121495833
210 AF 13/16X7/8: RNCC: 3 | RNVC: 2
26R-AF-C 13/16X7/8: RNCC: 5 | RNVC: 9
26R-AF-C 13/16X7/8: RNCC: 5 | RNVC: 9
26R13-16X7-8: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-175-5661
Pliers

121755661
2718B: RNCC: 3 | RNVC: 9
10/160 C5 SL: RNCC: 5 | RNVC: 2
106738: RNCC: 5 | RNVC: 2

27 Sep 1978

5120-12-134-2750
Abpreszvorrichtung

121342750
070M00900: RNCC: 3 | RNVC: 2
VQ60510: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-345-9735
Montierdorn

123459735
124080: RNCC: 3 | RNVC: 2

26 May 1998

5120-12-372-0071
Screw Extractor

123720071
701736: RNCC: 3 | RNVC: 2

11 Jun 2007

5120-12-161-5808
Socket Head Screw Key

121615808
1712180109: RNCC: 3 | RNVC: 2
17121 80109: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-120-5586
Rack Bar Jack

121205586
DIN7355-A3: RNCC: 2 | RNVC: 2
0810037: RNCC: 3 | RNVC: 2
03: RNCC: 5 | RNVC: 2
A3DIN7355: RNCC: 5 | RNVC: 2
3DIN7355: RNCC: 5 | RNVC: 9
301-3: RNCC: 5 | RNVC: 9

30 May 1969

5120-12-164-7522
Socket Wrench Crowfoot Attachment

121647522
1950M46: RNCC: 3 | RNVC: 2
105596: RNCC: 5 | RNVC: 2

30 May 1969

5120-12-388-0609
Open End Box Wrench

123880609
00497091180: RNCC: 3 | RNVC: 2

22 Feb 2012

5120-12-383-8449
Hand Hammer

123838449
1060600C: RNCC: 3 | RNVC: 2

13 Dec 2010

5120-12-040-0064

Load More Results