5120-66-065-1735

9912 https//www.nsnlookup.com /cage Dept Of Defence (Army Office) (CAGE Code Z9992) Nov 1972 5120-66-065-1735

Bucking Bar E1206-1CRNCC: 3 | RNVC: 2 | DAC: 21206-1CRNCC: 5 | RNVC: 9 | DAC: 9 10 Jan 1974 5120-66-065-1735

5310-01-666-1529 5310016661529 016661529 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

: 9 25 Oct 1974 5820-66-056-1743 Yoke Assy Z1TSEW8-387RNCC: 5 | RNVC: 9 | DAC: 9 27 Nov 1972 5120-66-065-1735

2007 5120-16-005-7413 Rivet Bucking Bar 88.14/34129013RNCC: 3 | RNVC: 2 | DAC: 1 5 Jun 2007 5120-66-065-1735