What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

What is an Automatic Center Punch?

An Automatic Center Punch (PUNCH,CENTER,AUTOMATIC) is a spring actuated center punch, which when pressed against an object forms an indentation mark without the use of a hammer. The force is adjustable by regulating the stroke.

What is a Handsaw Filing Vise?

A Handsaw Filing Vise (VISE,HANDSAW FILING) is a clamping device consisting of a base, one stationary jaw and one jaw actuated by either a cam, an eccentric lever, or a screw lever, and designed to be clamp-mounted or bolted to a bench, table or the like. It may include a filing guide. Excludes VISE, BANDSAW FILING.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Hand Saw Set?

A Hand Saw Set (SAW SET,HAND) is a hand tool, designed for setting the cutting position of saw teeth to form a kerf wider than the thickness of the saw blade. In operation, it is held in the hand to set the saw teeth. See also SAW SETTING MACHINE.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Liquid Fuel Fire Pot?

A Liquid Fuel Fire Pot (FIRE POT,LIQUID FUEL) is a heating unit, with a bail like handle for hand carrying, provided with burners for liquid fuel to generate heat to melt solder, wax, and the like in a pot which fits into or is a part of the top assembly. An integral pressure pump is used to compress the air in the unit to furnish the fuel to the burners under pressure. It may have provisions for heating soldering irons.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Watchmaker's Blower?

A Watchmaker's Blower (BLOWER,WATCHMAKER'S) is a hand tool consisting of a tubular or bulblike body and a stem or nozzle. It is made of metal or rubber, for use in blowing dust from watch parts, instrument parts, and the like.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Sewing Palm?

A Sewing Palm (PALM,SEWING) is a metallic disk attached to a strap and worn on the palm of the hand. It is used to push the needle through the canvas in sewing sails and like items.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

What is a Friction Igniter?

A Friction Igniter (IGNITER,FRICTION) is an item having a file and flint at one end which when rubbed together produce a spark.

What is a Plier Type Eyelet Punch?

A Plier Type Eyelet Punch (PUNCH,EYELET,PLIER TYPE) is a device which punches or pierces a hole and in addition fastens or sets a metal eyelet in cloth, paper and similar material. It is similar to a plier in general form. See also PRESS, GROMMET AND EYELET, HAND OPERATED.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

What is a Wood Caulking Iron?

A Wood Caulking Iron (CAULKING IRON,WOOD) is refer to Reference Drawing Group A before using item name. See also CAULKING TOOL, HAND; HAWSING IRON and YARNING IRON.

What is a Yarning Iron?

A Yarning Iron is refer to Reference Drawing Group AH before using item name. See also CAULKING TOOL, HAND; CAULKING IRON, WOOD and HAWSING IRON.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

Hand Tools, Nonedged, Nonpowered

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 64 of 880

NSN Format for Hand Tools, Nonedged, Nonpowered

51	20	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5120 Hand Tools, Nonedged, Nonpowered

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Additional Information for Hand Tools, Nonedged, Nonpowered

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

NSN by Country

US
United States
172992 Items

FR
France
54685 Items

UK
United Kingdom
53614 Items

IT
Italy
42007 Items

DE
Germany
30603 Items

CA
Canada
22897 Items

NO
Norway
12040 Items

DK
Denmark
11747 Items

AU
Australia
6618 Items

NZ
New Zealand
5670 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 136 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 95 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is an Automatic Center Punch? 60 Items: An Automatic Center Punch (PUNCH,CENTER,AUTOMATIC) is a spring actuated center punch, which when pressed against an object forms an indentation mark without the use of a hammer. The force is adjustable by regulating the stroke.
What is a Handsaw Filing Vise? 13 Items: A Handsaw Filing Vise (VISE,HANDSAW FILING) is a clamping device consisting of a base, one stationary jaw and one jaw actuated by either a cam, an eccentric lever, or a screw lever, and designed to be clamp-mounted or bolted to a bench, table or the like. It may include a filing guide. Excludes VISE, BANDSAW FILING.
What is a Hand Vise? 226 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 199 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 1119 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 1160 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 5192 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 162 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Mandrel,Blacksmith's 124 Items
Fuller,Bottom,Blacksmith's 27 Items
Swage,Bottom,Blacksmith's 84 Items
What is a Hand Tube Flaring Tool? 272 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Hand Saw Set? 29 Items: A Hand Saw Set (SAW SET,HAND) is a hand tool, designed for setting the cutting position of saw teeth to form a kerf wider than the thickness of the saw blade. In operation, it is held in the hand to set the saw teeth. See also SAW SETTING MACHINE.
What is a Blacksmith's Punch? 91 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Liquid Fuel Fire Pot? 11 Items: A Liquid Fuel Fire Pot (FIRE POT,LIQUID FUEL) is a heating unit, with a bail like handle for hand carrying, provided with burners for liquid fuel to generate heat to melt solder, wax, and the like in a pot which fits into or is a part of the top assembly. An integral pressure pump is used to compress the air in the unit to furnish the fuel to the burners under pressure. It may have provisions for heating soldering irons.
What is a Drain Plug Wrench? 184 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Watchmaker's Blower? 12 Items: A Watchmaker's Blower (BLOWER,WATCHMAKER'S) is a hand tool consisting of a tubular or bulblike body and a stem or nozzle. It is made of metal or rubber, for use in blowing dust from watch parts, instrument parts, and the like.
What is a Quick Adjusting Screw Clamp? 455 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Sewing Palm? 27 Items: A Sewing Palm (PALM,SEWING) is a metallic disk attached to a strap and worn on the palm of the hand. It is used to push the needle through the canvas in sewing sails and like items.
What is a Ratchet Screwdriver? 162 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 14292 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 41 Items
Fuller,Top,Blacksmith's 36 Items
Swage,Top,Blacksmith's 66 Items
What is a Pipe Wrench? 892 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 1899 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 641 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 112 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 489 Items
What is a Screwdriver Bit? 4296 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 181 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 17111 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 7971 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 6874 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 229 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
Groover,Sheet Metal,Hand 35 Items
What is a Face Spanner Wrench Socket? 2219 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 53 Items
What is a Hand Tube Bender? 366 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 5642 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 869 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
Creaser,Leather,Hand 14 Items
Seamer,Sheet Metal,Hand 16 Items
Ladle,Melting,Hand 27 Items
What is a Friction Igniter? 62 Items: A Friction Igniter (IGNITER,FRICTION) is an item having a file and flint at one end which when rubbed together produce a spark.
What is a Plier Type Eyelet Punch? 30 Items: A Plier Type Eyelet Punch (PUNCH,EYELET,PLIER TYPE) is a device which punches or pierces a hole and in addition fastens or sets a metal eyelet in cloth, paper and similar material. It is similar to a plier in general form. See also PRESS, GROMMET AND EYELET, HAND OPERATED.
Bar,Lining 17 Items
What is a Pinch Bar? 155 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 217 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 161 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 173 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 2151 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Wood Caulking Iron? 38 Items: A Wood Caulking Iron (CAULKING IRON,WOOD) is refer to Reference Drawing Group A before using item name. See also CAULKING TOOL, HAND; HAWSING IRON and YARNING IRON.
What is a Yarning Iron? 12 Items: A Yarning Iron is refer to Reference Drawing Group AH before using item name. See also CAULKING TOOL, HAND; CAULKING IRON, WOOD and HAWSING IRON.
Mallet,Serving 40 Items
What is a Pliers? 3790 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 225 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
Strainer,Paint 29 Items
What is a Driftpin? 804 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 85 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 449 Items
What is an Edge Grip Sheet Metal Holder? 34 Items: An Edge Grip Sheet Metal Holder (HOLDER,SHEET METAL,EDGE GRIP) is a U-shaped, center lever grip clamping device or a forceps operated, spring loaded clamping device designed to grip edges of two or more sheet metal parts in order to position, align, and/or hold the parts together.
What is a Hole Sheet Metal Holder? 290 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Furnace And Flue Wire Brush? 73 Items: A Furnace And Flue Wire Brush (BRUSH,WIRE,FURNACE AND FLUE) is an item having a wire fill section of varying cross-sectional shapes securely twisted in a stem wire which is extended to form a handle, or it has a means for attaching a handle.
What is a Boiler Tube Wire Brush? 71 Items: A Boiler Tube Wire Brush (BRUSH,WIRE,BOILER TUBE) is a sectional item used to clean the internal surfaces of boiler tubes, condenser tubes, heat exchanger tubes, and the like. It may be hand-operated or power driven and of the expanding or nonexpanding type. It does not contain a scraper.
What is a Screwdriver And Wrench Assembly? 87 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 413 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 38 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 114 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
Swaging Tool,Flexible Cable Terminal 35 Items
What is a Hand Nail Puller? 47 Items: A Hand Nail Puller (PULLER,NAIL,HAND) is a hand-held, hand-operated device, consisting of a handle fixed to a rammer which slides along a shaft having one pivoted jaw. The overall length may vary from 17 to 20 inches (431.8 to 508.0 millimeters) long.
Swage Block,Blacksmith's 11 Items
What is a Tack Claw? 35 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 96 Items
What is an Asphalt Rake? 12 Items: An Asphalt Rake (RAKE,ASPHALT) is a rake with a long metal shank to prevent burning of the handle. The shank, measured between the handle ferrule and the rake head, must have a length of at least 10 inches.
What is a Socket Wrench Handle Bar? 808 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 142 Items
Riveter,Blind,Hand 418 Items
What is an Eastern Pattern Scoop? 25 Items: An Eastern Pattern Scoop (SCOOP,EASTERN PATTERN) is a square pointed hand tool of open (hollow) back construction having a maximum blade width of 13-1/2 inches (342.9 mm). Refer to Reference Drawing Group BG before using item name.
What is a Sand And Gravel Scoop? 38 Items: A Sand And Gravel Scoop (SCOOP,SAND AND GRAVEL) is a round point hand tool of open (hollow) back construction having a maximum blade width of 12 3/4 inches. It is normally furnished with a D-handle which consists of a steel tubular dee with a wood grip or spool. Refer to Reference Drawing Group BG before using item name.
What is a Western Pattern Scoop? 12 Items: A Western Pattern Scoop (SCOOP,WESTERN PATTERN) is a square pointed hand tool of open (hollow) back construction having a minimum blade width more than 13-1/2 inches (342.9 mm). Refer to Reference Drawing Group BG before using item name.
What is a Hand Shovel? 428 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 239 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Trench Brace? 14 Items: A Trench Brace (BRACE,TRENCH) is aportable tool consisting of a tubular section with a round, threaded shaft, adjusting nut, and a bearing shoe at each end. Used to support the sides of trenches, ditches, and similar excavations.
What is a Blacksmiths' Tongs? 145 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
Forceps,Sheet Holder 19 Items
What is a Hand Car Mover? 16 Items: A Hand Car Mover (CAR MOVER,HAND) is a tool consisting of a pinch bar and toggle action head, having compound leverage which provides force in imparting a turning motion to a railroad car wheel for moving the car.
Digger,Posthole,Hinged 15 Items
What is a Hand Storage Battery Carrier? 67 Items: A Hand Storage Battery Carrier (CARRIER,STORAGE BATTERY,HAND) is an item used to transport a battery in level position and provide positive placement control. It may consist of straps with battery post grips or adjustable tong type brackets with handles and battery case gripping jaws. It is designed to facilitate safe handling of a BATTERY, STORAGE and prevent breakage and accidental contact with spilled acid.
What is a Digging Bar? 60 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
What is a Timber Bar? 13 Items: A Timber Bar (BAR,TIMBER) is before using, refer to Reference Drawing Group AG.
What is a Wire Stretcher? 18 Items: A Wire Stretcher (STRETCHER,WIRE) is a hand tool which utilizes any of the various types of mechanical advantage, specifically designed with a wire gripping device to stretch barbed wire and/or single strand wire. See also PULLER, RATCHET LEVER, CABLE TYPE. Excludes BLOCK AND TACKLE and items with or without attachments when designed for multiapplication purposes, such as stretching fences, moving heavy equipment, setting machinery or the like, which require a hoisting and/or pulling action.
Block,Dolly,Sheet Metalworking 184 Items
What is a Tubing Pinch-Off Tool? 23 Items: A Tubing Pinch-Off Tool (PINCH-OFF TOOL,TUBING) is a tool consisting of two opposed bars, attached by two hinged pressure bolts. Incorporated into the bars are two blades for temporarily closing tubing while making repairs, and various sized forming holes, used to open and restore the tubing to its original shape after repairs have been completed.
What is a Piston Ring Compressor? 328 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 111 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Pike Pole? 60 Items: A Pike Pole is a hand tool consisting of a wood handle with a steel pike, with or without hook, secured on one end.
What is a Hand Posthole Auger? 37 Items: A Hand Posthole Auger (AUGER,POSTHOLE,HAND) is a tool consisting of a main stem with an earth boring device at one end and either a tee handle or accommodations for a tee handle at the other end. The earth boring device may be either a cylindrical bucket with adjustable or fixed blades, or a disk type open boring device with flat spiral shaped blades. The stem may be designed to accommodate sectional extensions or may be telescopic. Excludes DIGGER, POSTHOLE, HINGED and AUGER, EARTH BORING, HAND.
What is a Fuse Puller? 125 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Fid? 73 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
Force Cup,Plumber's 29 Items
Hoe,Mortar Mixing 10 Items
Hawk,Plasterer's 11 Items
What is a Concrete Groover? 20 Items: A Concrete Groover (GROOVER,CONCRETE) is excludes jointer, brick.
What is a Timber Wedge? 48 Items: A Timber Wedge (WEDGE,TIMBER) is refer to Reference Drawing Group AD before using item name.
Hook,Cant 18 Items
Bellows,Hand 33 Items
What is a Hand Lead Seal Press? 75 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 174 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Jeweler's Burnisher? 15 Items: A Jeweler's Burnisher (BURNISHER,JEWELER'S) is a knifelike hand tool consisting of a shaped metal blade with or without a handle, used to smooth and polish metal.
What is a Brake Lining Clamp? 18 Items: A Brake Lining Clamp (CLAMP,BRAKE LINING) is a clamp designed to smooth and position band-type brake lining for attachment to a brake shoe.
Tamper,Hand 21 Items
Heading Tool,Bolt 22 Items
What is a Hand Hammer? 3706 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 124 Items
What is a Concrete Edger? 24 Items: A Concrete Edger (EDGER,CONCRETE) is a hand tool with a turned side edge having a specified radius at the bend. The handle is attached to the flat surface of the tool. An edger with the side edge turned up is considered an "inside type" whereas an edger with the side edge turned down is considered an "outside type." The end(s) may be curved or straight. It is used for finishing the edges of concrete sidewalks, paving, curbs and the like. See also CORNER TOOL, CONCRETE.
What is a Lamp Extractor? 338 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 88 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Hand Sleeve Bearing Burnisher? 21 Items: A Hand Sleeve Bearing Burnisher (BURNISHER,SLEEVE BEARING,HAND) is a tool designed for smoothing out the bore of a cylindrical bearing.
Jointer,Brick 34 Items
What is a Carpenters' Pincers? 94 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Farrier's Pincers? 52 Items: A Farrier's Pincers (PINCERS,FARRIER'S) is a plierlike hand tool having two opposing jaws which are designed for removing horseshoes. The handles may have plain or ball ends. See also NIPPERS, END CUTTING and PINCERS, CARPENTERS'.
What is a Lasting Pincers? 16 Items: A Lasting Pincers (PINCERS,LASTING) is a plierlike hand tool having two mating, serrated, curved jaws for gripping leather. The concave side of the tool contains a round or square hammer head. One handle end may contain a nail or tack pulling claw. See also PINCERS, CARPENTERS' and PINCERS, FARRIERS'.
What is a Lead Joint Runner? 13 Items: A Lead Joint Runner is a device, consisting of a piece of asbestos rope with clamp, for pouring lead in bell and spigot pipe joints.
What is a Pipe Vise And Stand? 14 Items: A Pipe Vise And Stand (VISE AND STAND,PIPE) is a device consisting of a portable stand to which is attached a pipe vise. It may include a pipe bender.
What is a Hand Pipe And Sewer Auger? 82 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Earth Boring Auger? 33 Items: A Hand Earth Boring Auger (AUGER,EARTH BORING,HAND) is a boring tool with a double twist body, formed into a cutter head at one end and a shank at the other end. The shank may be designed to accommodate a tee handle, which may be included; or may be designed to be attached to pipe or pipe fittings. The tool is used for boring and/or tunneling into the earth. Excludes AUGER, POSTHOLE, HAND and BIT, AUGER.
What is a Hand Roller? 120 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 233 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Lubrication Fitting Tool? 56 Items: A Lubrication Fitting Tool is a combination tool having an extracting and rethreading tap acting as a T-handle, with double end socket wrench, to remove worn or broken high-pressure grease fittings.
What is a Stuffing Box And Pump Packing Extractor? 79 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Hand Abrasive Wheel Dresser? 123 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 86 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is an Engine Valve Seat Insert Knockout Tool? 26 Items: An Engine Valve Seat Insert Knockout Tool (KNOCKOUT TOOL,ENGINE VALVE SEAT INSERT) is a tool with an offset point so designed that when the point is placed against the portion of a valve seat insert, a hammer blow will remove the insert.
Replacing Tool,Engine Valve Seat Insert 43 Items
What is a Rivet Bucking Bar? 460 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 791 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 2214 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Melting Pot? 17 Items: A Melting Pot (POT,MELTING) is a pot of single or double wall construction, heated by direct exposure to heat or flame from combustible fuels, and used to melt soft metals and alloys, bitumens, wax, glue, and the like. Excludes KETTLE, HEATING, BITUMEN. See also POT, MELTING, ELECTRIC.
What is an Electric Melting Pot? 44 Items: An Electric Melting Pot (POT,MELTING,ELECTRIC) is a pot of single or double wall construction, heated by self-contained electrical elements and used to melt soft metals and alloys, wax, glue, and the like.
What is a Tire Repair Valve Holding Tool? 13 Items: A Tire Repair Valve Holding Tool (HOLDING TOOL,VALVE,TIRE REPAIR) is a metal hand tool with offset handle at one end and a threaded hole at the other end, designed to hold a damaged auto tire valve while making a replacement.
Scriber,Diamond Point 14 Items
What is a Woven Cable Grip? 256 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Caulking Gun Nozzle? 125 Items: A Caulking Gun Nozzle (NOZZLE,CAULKING GUN) is an item of various configurations and opening size(s) through which semisolid materials are dispensed. It is usually designed to be threaded onto the end cap of a hand held tool.
What is a Screw Thread Insert Extractor? 101 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Armature Wedge Driver? 19 Items: An Armature Wedge Driver (DRIVER,ARMATURE WEDGE) is a hand tool designed for inserting and driving a wedge into the armature core, or stator winding, when winding or rewinding an armature.
What is a Basin Wrench? 40 Items: A Basin Wrench (WRENCH,BASIN) is a sliding tee handled wrench with jaw(s) designed to exert a turning force about an axis parallel with the leg of the handle. It is adaptable for close quarters and is used for basin nuts, ball cocks, and flush valves.
What is a Wire Splicing Clamp? 24 Items: A Wire Splicing Clamp (CLAMP,WIRE SPLICING) is a tool designed for use in effecting a connection of bare electrical wires by twisting two wires together, or by twisting conductors contained in a single and/or double tube sleeve.
What is a Friction Igniter Flint Tip? 43 Items: A Friction Igniter Flint Tip (FLINT TIP,FRICTION IGNITER) is an item consisting of a flint and mounting device for use with an IGNITER, FRICTION.
What is a Hand Cartridge Removing Hook? 11 Items: A Hand Cartridge Removing Hook (HOOK,CARTRIDGE REMOVING,HAND) is refer to Reference Drawing Group AP before using item name.
What is a Hand Helical Spring Puller Hook? 39 Items: A Hand Helical Spring Puller Hook (HOOK,HELICAL SPRING PULLER,HAND) is a hook whose curved end conforms to Style AP10 of Reference Drawing Group AP.
What is a Hand Manhole Cover Hook? 18 Items: A Hand Manhole Cover Hook (HOOK,MANHOLE COVER,HAND) is a hook whose bent end conforms to Style AP5 of Reference Drawing Group AP.
What is an Electron Tube Extractor? 114 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is an Orangewood Stick? 12 Items: An Orangewood Stick is an item of uniform diameter end to end, or of uniform diameter in the center section, with end(s) tapered either flat or conical. The tapered ends may be, but are not necessarily, of the same dimensions. See also SPUDGER.
What is a Cross Tip Screwdriver? 2258 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
Screwdriver,Clutch Tip 26 Items
What is a Swivel Knob Jeweler's Screwdriver? 473 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 261 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is a Spark Testing Screwdriver? 38 Items: A Spark Testing Screwdriver (SCREWDRIVER,SPARK TESTING) is a manual screwdriver having an integral flash indicator.
What is an Electronic Equipment Alignment Tool? 904 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 117 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 69 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Molder's Rammer? 18 Items: A Hand Molder's Rammer (RAMMER,MOLDER'S,HAND) is a tool consisting of a peen and a butt, each at opposite ends of a handle. It is used for tamping or packing molding sand in foundry work. See also RAMMER, SAND, PORTABLE, PNEUMATIC.
What is a Hand Powered Poppet Valve Lapper? 73 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is a Leatherworker's Modeling Tool? 12 Items: A Leatherworker's Modeling Tool (MODELING TOOL,LEATHERWORKER'S) is a hand tool used for working designs on leather.
What is a Marlinespike? 125 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is a Holder And Inserted Hammer Face Set? 16 Items: A Holder And Inserted Hammer Face Set is a hand hammer of the inserted face style, consisting of a HOLDER, INSERTED HAMMER FACE and three or more of FACE, HAMMER, INSERTED.
What is a Blasting Cap Crimper? 31 Items: A Blasting Cap Crimper (CRIMPER,BLASTING CAP) is a manually operated tool designed for fastening blasting caps to safety fuse.
What is a Hand Water Closet Auger? 10 Items: A Hand Water Closet Auger (AUGER,WATER CLOSET,HAND) is a flexible coiled spring wire, with a boring head at one end and a crank handle at the opposite end. Both the handle shank and a portion of the spring wire are encased in a metal guide tube. The end of the guide tube opposite the handle is shaped into a single bend to facilitate entry into the water closet bowl. Excludes AUGER, PIPE AND SEWER, HAND.
What is a Backing Out Punch? 58 Items: A Backing Out Punch (PUNCH,BACKING OUT) is a hand tool designed with a straight cylindrical punch end for backing out punches, rivets, pins and the like. It is hammerlike in appearance and fitted with a wood handle. See also PUNCH, BLACKSMITH'S; PUNCH, TRACK.
What is an Aligning Punch? 608 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 491 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 163 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 203 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 289 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 1698 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Bung Wrench? 73 Items: A Bung Wrench (WRENCH,BUNG) is a nonadjustable wrench specifically designed to remove or replace threaded bung(s) on oil, gasoline, or solvent drums. Excludes WRENCH, SPANNER. See also WRENCH, DRAIN PLUG.
What is a Socket Wrench Ratchet Attachment? 168 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 226 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Socket Wrench Head Socket Adapter? 25 Items: A Crowfoot Socket Wrench Head Socket Adapter (ADAPTER,SOCKET,CROWFOOT SOCKET WRENCH HEAD) is an item with one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having a square external plug to fit into the internal square drive of a SOCKET, SOCKET WRENCH.
What is a Crowfoot Socket Wrench Head? 85 Items: A Crowfoot Socket Wrench Head (HEAD,CROWFOOT SOCKET WRENCH) is a component with a square internal drive eccentric to an open-wall opening designed to receive any of a series of wrenching sockets, adapters, or attachments. See also CROWFOOT ATTACHMENT, SOCKET WRENCH and SOCKET, CROWFOOT WRENCH HEAD.
What is a Crowfoot Wrench Head Socket? 155 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 2506 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 216 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 394 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 350 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 10313 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 5310 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 1038 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Lineman's Wrench? 11 Items: A Lineman's Wrench (WRENCH,LINEMAN'S) is an item having an opening at each end. Each end opening has two sizes. In addition, the larger end is provided with a hole for turning in standard pole steps.
What is a Mechanic's Bench Block? 35 Items: A Mechanic's Bench Block (BLOCK,BENCH,MECHANIC'S) is a metal block with the working surface drilled and grooved. It is used for driving pins or dowels in round or flat work.
What is a Flexible Conduit Ferrule Swaging Tool? 12 Items: A Flexible Conduit Ferrule Swaging Tool (SWAGING TOOL,FLEXIBLE CONDUIT FERRULE) is a hand operated device designed to attach a ferrule to the end of a flexible conduit.
What is a Torque Wrench? 4484 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 306 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 47 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Capstan Bar? 20 Items: A Capstan Bar (BAR,CAPSTAN) is a straight barlike item used to turn a capstan head.
What is a Claw Bar? 79 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Tube Fitting Wrenching Socket? 56 Items: A Tube Fitting Wrenching Socket (SOCKET,WRENCHING,TUBE FITTING) is an item specifically designed to remove and replace copper, brass, or similar soft metal fittings without damaging same.
What is a Hand Contact Burnisher? 80 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Pin Vise? 92 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Shock Type Wheel Stud Nut Wrench? 65 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Geared Socket Wheel Stud Nut Wrench? 70 Items: A Geared Socket Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,GEARED SOCKET) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft having a geared head, while the outer nut is held stationary by a separate hexagonal holding wrench. It is designed to be activated by a standard socket wrench (lug wrench) when fitted to a single geared driving shaft or it may be activated by removable sliding bar handles for each of the gear driving shafts. Excludes WRENCH, SOCKET. See also WRENCH, WHEEL STUD NUT, SHOCK TYPE.
What is a Dapping Punch? 32 Items: A Dapping Punch (PUNCH,DAPPING) is an item consisting of steel bar having one end ball shaped. It is used to form flat metal sheets into a hemispherical shape by working it against a die and striking the opposite end of punch with a hammer.
What is a Socket Head Screw Crowfoot Wrench Attachment? 27 Items: A Socket Head Screw Crowfoot Wrench Attachment (CROWFOOT WRENCH ATTACHMENT,SOCKET HEAD SCREW) is an attachment designed with a collar to fit into a HEAD, CROWFOOT SOCKET WRENCH having a hexagon plug (drive tang) extending therefrom.
What is a Drift Pin Set? 48 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 214 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Tire Removing Tool? 25 Items: A Tire Removing Tool is a unit consisting of two matched metal items, one having a drop center hook at one end. It may or may not have a flat blade on the opposite end. The other item has a flat serrated or curved blade that fits through the drop center hook end. See Reference Drawing Group AY before using. See also TIRE IRON.
What is a Woodworker's Vise? 32 Items: A Woodworker's Vise (VISE,WOODWORKER'S) is a clamping device consisting of a base, one or two jaws actuated by a screw or a cam and rack, and two guide bars, designed to be bolt mounted to a bench, table or the like. When so mounted, the jaw top(s) is flush with the top of the bench or table. Excludes VISE, PATTERNMAKER'S.
What is a Socket Head Screw Key Set? 1256 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Sheet Metal Worker's Vise? 26 Items: A Sheet Metal Worker's Vise (VISE,SHEET METAL WORKER'S) is a clamping device consisting of one stationary and one manual screw actuated jaw, and one or more guide bars or rods. The jaws are high tapered and extra deep and are normally smooth faced. Designed to be bolt mounted on bench, table, or the like. Excludes vises having pipe holding jaws. See also VISE, BENCH AND PIPE.
What is a Blacksmith's Vise? 33 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Patternmaker's Vise? 11 Items: A Patternmaker's Vise (VISE,PATTERNMAKER'S) is a clamping device consisting of a body, square guide beam, front jaw, back jaw, tilt jaw, tilt support with vise lock, screw, and screw handle. Designed to be bolt mounted to a bench, table, or the like and so constructed as to allow 360 degree rotation of jaws and a 90 degree tilt of the vise from the normal horizontal position to a vertical position. Capable of being locked at any angle of the tilt. See also VISE, WOODWORKER'S and VISE, MULTIPOSITION.
What is a Machinist's Vise? 396 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Bench And Pipe Vise? 75 Items: A Bench And Pipe Vise (VISE,BENCH AND PIPE) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, each with integral or detachable pipe holding (serrated) jaws, and one or more guide bars or rods. Designed to be clamped or bolted to a bench, table or the like.
What is a Clamp Base Bench Vise? 96 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Hand Rivet Set Assortment? 15 Items: A Hand Rivet Set Assortment (RIVET SET ASSORTMENT,HAND) is a group of two or more RIVET SET, HAND having different characteristics.
What is a Fixed Open End Wrench Set? 521 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Solid Center Punch Set? 25 Items: A Solid Center Punch Set (PUNCH SET,CENTER,SOLID) is a group of PUNCH, CENTER, SOLID having different characteristics.
What is a Prick Punch? 44 Items: A Prick Punch (PUNCH,PRICK) is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a tapered needlelike point which is ground to an included angle of approximately 25 degrees to 30 degrees. Excludes PUNCH, CENTER, SOLID; PUNCH, COPPERING.
What is a Nail Set? 93 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Ratcheting Crowfoot Wrench Set? 24 Items: A Ratcheting Crowfoot Wrench Set (WRENCH SET,CROWFOOT,RATCHETING) is a collection of various size SOCKET, CROWFOOT WRENCH HEAD; HEAD, CROWFOOT SOCKET WRENCH and handle(s). It may include universal joints, ratcheting adapters, and other attachments used therewith.
What is a Socket Wrench Set? 1481 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 89 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 642 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 284 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 81 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
What is a Pole Raising Support? 21 Items: A Pole Raising Support (SUPPORT,POLE RAISING) is an item having a curved fork on upper end attached to either a pole handle or a collapsible crossed leg frame, with point(s) on the lower end(s) to prevent slippage, specifically designed for raising and positioning a wooden pole. See also PIKE POLE.
Pin Straightener,Electron Tube 38 Items
Handle,Mattock-Pick 58 Items
What is an Electron Tube Socket Contact Positioner? 10 Items: An Electron Tube Socket Contact Positioner (CONTACT POSITIONER,ELECTRON TUBE SOCKET) is an item whose contact configuration is identical to that of a standard electron tube base and which is designed to be inserted into an electron tube socket for the specific purpose of rigidly restraining the displacement of the socket contact terminals while excessive heat is being applied on, or near the terminals as a result of a soldering operation.
What is a Cant Hook And Peavy Handle? 13 Items: A Cant Hook And Peavy Handle (HANDLE,CANT HOOK AND PEAVY) is an item made of nonmetallic material, designed to be attached to a metallic hinged hook, which may have a sharply pointed end. It is used to provide a grip for grasping and turning over logs.
What is a Nail Set Assortment? 10 Items: A Nail Set Assortment is a group of two or more NAIL SET having different diameter points.
What is a Spudger? 16 Items: A Spudger is a hand tool of nonconductive material with a conical point on one end and a chisel-like point on the other end. It is designed to locate or position electric leads in wired equipment.
What is a Stuffing Box And Pump Packing Extractor Set? 20 Items: A Stuffing Box And Pump Packing Extractor Set (EXTRACTOR SET,STUFFING BOX AND PUMP PACKING) is a group of EXTRACTOR, STUFFING BOX AND PUMP PACKING having different characteristics.
What is a Sheet Metal Workers' Tongs? 30 Items: A Sheet Metal Workers' Tongs (TONGS,SHEET METAL WORKERS') is a long handled forged steel clamping tool having a wide jaw 6 inches (152.4 millimeters) or over in length. It may or may not have a locking ring at end of handle. Used to draw together sheet metal for cleating and/or for turning operations. See also TONGS, BLACKSMITHS'.
Spoon,Body And Fender 66 Items
What is a Wrench Kit? 305 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Tap Extractor Set? 14 Items: A Tap Extractor Set (EXTRACTOR SET,TAP) is a group of EXTRACTOR, TAP having different characteristics.
What is a Saddler's Sewing Awl? 22 Items: A Saddler's Sewing Awl (AWL,SADDLER'S SEWING) is an item consisting of a haft with replaceable straight sewing machine type or curved type needle(s) and/or straight diamond point type needle(s). The automatic type contains a bobbin in the haft.
What is a Brad Awl? 44 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Saddler's Harness Awl? 10 Items: A Saddler's Harness Awl (AWL,SADDLER'S HARNESS) is an item consisting of one or more BLADE, SADDLER'S HARNESS AWL, and a haft.
Pricker,Sailmaker's 16 Items
What is a Scratch Awl? 126 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 181 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 519 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 115 Items
Jack,Bumper 62 Items
Jack,Reel,Hand 34 Items
Pick,Digging 146 Items
What is a Spade? 63 Items: A Spade is a sturdy cutting and digging tool having a thick handle and a heavy flat blade that can be pressed into ground with the foot.
What is a Hand Intrenching Tool? 62 Items: A Hand Intrenching Tool (INTRENCHING TOOL,HAND) is a shovel type tool or a pick and shovel combination having standard cutting blade edges or specially designed blade edges for cutting and chopping. It may have a handgrip on the handle. It is designed to be used by individual soldiers primarily for intrenching. Refer to Reference Drawing Group BG for styles.
What is a Hand Fire Shovel? 13 Items: A Hand Fire Shovel (FIRE SHOVEL,HAND) is a one-hand shovel used for firing solid fuel in stoves, forges, and the like. Excludes SHOVEL, HAND.
Peavy 13 Items
What is a Piston Ring Expander? 181 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Blowtorch,Gasoline 38 Items
Blowtorch,Kerosene 18 Items
What is a Hand Electrical Conduit Bender? 73 Items: A Hand Electrical Conduit Bender (BENDER,ELECTRICAL CONDUIT,HAND) is a hand-actuated tool used for cold bending rigid electric conduit. It consists of a head having an opening to receive the conduit and has provision for attaching a pipe type handle. It may be furnished with or without a handle. Excludes benders for pipe, tube, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Joint Breaking Wedge? 60 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Blade,Saddler's Harness Awl 27 Items
Lifter,Foundry,Molder's 10 Items
Mallet,Plastic 127 Items
Mallet,Rawhide 40 Items
Mallet,Rubber 101 Items
What is a Wood Mallet? 156 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 106 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 71 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Pneumatic Tire Valve Repair Tool? 41 Items: A Pneumatic Tire Valve Repair Tool (REPAIR TOOL,PNEUMATIC TIRE VALVE) is a four-way hand tool designed to repair valve stem cap threads, inside valve core threads, to smooth valve mouths, and to insert or remove valve cores for standard or large bore tire valves. See also INSERTER AND REMOVER, PNEUMATIC TIRE VALVE CORE.
What is a Body And Fender Repair Pick? 24 Items: A Body And Fender Repair Pick (PICK,BODY AND FENDER REPAIR) is a tool designed with one end having a special curved or angled shape with a pointed or chisel like tip to insert under trimmings for straightening, and the other end either straight or tee handled. It is used in automotive body and fender repair. See also PUNCH, BODY AND FENDER REPAIR.
What is a Hand Tube Swaging Tool Kit? 67 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Swaging Punch? 31 Items: A Hand Tube Swaging Punch (PUNCH,TUBE SWAGING,HAND) is a noncutting punchlike tool, having a formed shank on one end and a flared head on the other, designed for enlarging inside diameters of ductile metallic tubing to permit insertion of tubing of the same size. In use, the tool is driven into the end of tubing clamped in a tube flaring bar which is not included with this item. See also SWAGING TOOL KIT, TUBE, HAND.
What is a Handicraft Snap Fastener Setter? 10 Items: A Handicraft Snap Fastener Setter (SETTER,SNAP FASTENER,HANDICRAFT) is an item consisting of 2 dies and a spacing base to which is fastened 2 anvils. It is specifically adapted to space and set several size snap fasteners on such articles as gloves, purses, key cases and the like. Excludes setters designed for a specific size and type fastener.
What is a Jeweler's Staking Tool? 21 Items: A Jeweler's Staking Tool (STAKING TOOL,JEWELER'S) is an item consisting of a staking frame and die, having additional punches and stumps. The punches may or may not be inverted and used as stumps. Used to remove and/or replace wheel staffs and the like. Excludes FRICTION JEWELING KIT, JEWELER'S.
What is an Abrasive Wheel Dresser Cutters? 44 Items: An Abrasive Wheel Dresser Cutters (CUTTERS,ABRASIVE WHEEL DRESSER) is a group of steel disks having hardened cutting teeth around the perimeter, with separators (washers). Used as a replacement set in a revolving cutter type DRESSER, ABRASIVE WHEEL, HAND.
What is a Hand Tube Flaring Punch? 72 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hand Tube Belling Punch? 25 Items: A Hand Tube Belling Punch (PUNCH,TUBE BELLING,HAND) is a noncutting punchlike tool having a shaped head on one end which is designed to bell out and solidly seat the ends of condenser tubes, evaporator tubes, and the like when the tube is installed in the tube sheet. It is generally used after the flaring operation.
What is a Hand Screw? 39 Items: A Hand Screw is a clamping device consisting of two wood or wood faced jaws, actuated by two, handled, metal or wood spindle screws. The spindle screws operate independently to permit the jaws to be set at an angle to each other.
What is a Hose Strap Band Clamping Tool? 84 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 120 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Handle Sliding T-Head? 33 Items: A Socket Wrench Handle Sliding T-Head (SLIDING T-HEAD,SOCKET WRENCH HANDLE) is an item having a square male end designed to fit into the female end of a wrench socket or attachment and has provisions for a sliding bar, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH.
What is an Etching Needle? 20 Items: An Etching Needle (NEEDLE,ETCHING) is a styluslike tool mounted in a handle. It is used in preparing metal lithographic plates and photo engravings. See also ETCHING POINT.
What is a Cementing And Vulcanizing Stitcher? 17 Items: A Cementing And Vulcanizing Stitcher (STITCHER,CEMENTING AND VULCANIZING) is a hand-held item consisting of a metal circular disk on an axle attached to a handle. The width of the disk face is not more than 1/4 inch (6.35 millimeters).See also ROLLER, HAND.
What is a Mechanical Puller? 10827 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 1466 Items
What is a Snow Pusher? 27 Items: A Snow Pusher is a handled item with a curved blade designed for pushing snow, cleaning walks and the like. See also SHOVEL, HAND.
What is a Hand Tube Bender Set? 44 Items: A Hand Tube Bender Set (BENDER SET,TUBE,HAND) is a group of BENDER, TUBE, HAND having different characteristics. See also BENDER SET, ELECTRICAL CONDUIT, HAND.
Fork,Stone 11 Items
What is a Slip Joint Pliers? 951 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Jewelers' Pliers? 28 Items: A Jewelers' Pliers (PLIERS,JEWELERS') is a tool having jaws designed for use in the assembly and repair of jewelry, watches, and the like. See also PLIERS and PLIERS (as modified).
What is a Typewriter Repair Pliers? 23 Items: A Typewriter Repair Pliers (PLIERS,TYPEWRITER REPAIR) is a tool having jaws designed for use in typewriter repair operations, such as attaching, detaching, cutting, and aligning bars, keys, and the like. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 76 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 1347 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Hog Ring Staple Pliers? 14 Items: A Hog Ring Staple Pliers (PLIERS,HOG RING STAPLE) is refer to Reference Drawing Group A. See also PLIERS; and PLIERS (as modified).
What is a Valve Spring Compressor? 203 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
Haft,Saddler's Awl 20 Items
What is a Socket Wrench Socket Set? 939 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 353 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Jeweler's Assembly Block Set? 11 Items: A Jeweler's Assembly Block Set (ASSEMBLY BLOCK SET,JEWELER'S) is a collection of hollow formed blocks, designed for holding round watch movements during repair and/or assembly.
What is a Screwdriver Bit Set? 238 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 126 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is a Torch And Regulator Wrench? 43 Items: A Torch And Regulator Wrench (WRENCH,TORCH AND REGULATOR) is a nonadjustable tool having multisize openings for turning mixing head nuts, hose connection nuts, cylinder connection nuts, and the like on welding and cutting outfits.
What is an Inspection Mirror? 462 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 115 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Straight And Offset Cross Tip Screwdriver Set? 13 Items: A Straight And Offset Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP,STRAIGHT AND OFFSET) is a group of SCREWDRIVER, CROSS TIP and SCREWDRIVER, OFFSET with cross tip(s) only, having different characteristics.
What is a Spanner Wrench Set? 147 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Watch Balance Screw Screwdriver And Holder? 10 Items: A Watch Balance Screw Screwdriver And Holder (SCREWDRIVER AND HOLDER,WATCH BALANCE SCREW) is a manual screwdriver which is designed to insert and remove various sizes of watch balance screws. The item consists of a blade and a set of gripping jaws. It holds the screw by gripping the head while the blade is inserted in the slot.
Needle,Saddler's Sewing Awl 10 Items
What is a Hand Hydraulic Jack Kit? 104 Items: A Hand Hydraulic Jack Kit (JACK KIT,HYDRAULIC,HAND) is an item consisting of one or more JACK, HYDRAULIC, HAND with various attachments to harness the ram action for pulling, clamping, lifting, spreading, pressing and/or bending in addition to the pushing action of the hydraulic hand jack.
What is an Internal Gripping Pipe Wrench? 35 Items: An Internal Gripping Pipe Wrench (WRENCH,PIPE,INTERNAL GRIPPING) is a hand tool designed to be inserted into the end of nipples and pipes, and grip the inner surface by a cam or expansion action. It is used to turn items which may not protrude sufficiently to grip externally, or where an exterior plating or thread may not be marred. The tool is turned by applying a wrench to the protruding section.
What is an Offset Screwdriver Set? 29 Items: An Offset Screwdriver Set (SCREWDRIVER SET,OFFSET) is a group of SCREWDRIVER, OFFSET having different characteristics.
What is a Flat Tip-Cross Tip Screwdriver? 84 Items: A Flat Tip-Cross Tip Screwdriver (SCREWDRIVER,FLAT TIP-CROSS TIP) is a manual screwdriver having a single, reversible blade with one flat tip and one cross tip. The item is designed to securely retain the blade in the handle, yet permit instantaneous removal and insertion.
What is a Refrigeration Valve Stem Wrench Socket? 33 Items: A Refrigeration Valve Stem Wrench Socket (SOCKET,WRENCH,REFRIGERATION VALVE STEM) is an item having a 1/4 inch (6.3 mm) square external drive on one end, and a square internal opening at the other end. The outside diameter is specially sized to clear openings in refrigeration valve bonnets and covers for reaching recessed stems. It is designed for use with a ratchet wrench for opening and/or closing square stem refrigeration valves.
What is a Drive Pin Punch Set? 177 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 26 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Drift Punch Set? 40 Items: A Drift Punch Set (PUNCH SET,DRIFT) is a group of PUNCH, DRIFT having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 89 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 219 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Hand Sheet Metal Pipe Crimping Tool? 31 Items: A Hand Sheet Metal Pipe Crimping Tool (CRIMPING TOOL,SHEET METAL PIPE,HAND) is a hand tool designed for contracting the ends of sheet metal pipe by crimping. The crimping roll type consists of a set of two crimping rolls which are rotated by means of two handles and a ratchet. The length of crimp is adjustable. The formed jaw type is a plierlike tool having two mating formed jaws which form a single indentation with each closing of the jaws upon the metal.
What is a Solid Center Punch? 393 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 109 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Brake Shoe Adjusting Tool? 62 Items: A Brake Shoe Adjusting Tool (ADJUSTING TOOL,BRAKE SHOE) is a bar of steel having flat, angled, blade ends designed to insert through the slot in a brake back plate to turn the brake shoe adjusting nut by a prying action.
What is a Hand Yoke Riveter? 95 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is an Electronic Equipment Tuning Wand? 37 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is an Inserted Hammer Face Holder? 135 Items: An Inserted Hammer Face Holder (HOLDER,INSERTED HAMMER FACE) is a HAMMER, HAND of the inserted face style, furnished without FACE, HAMMER, INSERTED.
What is a Combination Open End And Spanner Wrench? 161 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Dashpot Handling Tool? 18 Items: A Dashpot Handling Tool (HANDLING TOOL,DASHPOT) is a specially designed handling tool consisting of a handle fixed to a rammer which slides along a shaft having one C-clamp type adjustable jaw.
What is a Detent Handling Tool? 234 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Battery Filler Cap Wrench? 16 Items: A Battery Filler Cap Wrench (WRENCH,BATTERY FILLER CAP) is a specially designed hand tool, consisting of a bar, one end of which is knurled, and the other end of which is equipped with pins to fit into matching holes of a FILLER CAP, BATTERY.
What is a Cantilever Jaw Clamp? 27 Items: A Cantilever Jaw Clamp (CLAMP,CANTILEVER JAW) is a clamping device consisting of two L-shaped members, the long leg of one attached to, and pivots on, the long leg of the other member. Both short legs of each member terminate in freely rotating square pressure pads. One face of each pressure pad has a V-groove. The clamping operation is actuated by a screw which pivots on both members. It is used for holding round or flat objects with parallel or nonparallel surfaces.
What is a Gasoline Field Range Fuel Jet Cleaner? 11 Items: A Gasoline Field Range Fuel Jet Cleaner (CLEANER,FUEL JET,GASOLINE FIELD RANGE) is a hand tool having a conical-shaped cutter specifically used to clean the fuel jet of a gasoline field range.
What is a Hand Material Handling Hook? 83 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 194 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 496 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Spanner Wrench Handle? 80 Items: A Spanner Wrench Handle (HANDLE,SPANNER WRENCH) is a hand tool designed to mate with the threaded end of a spanner wrench or it is unthreaded and designed to slip onto the wrench. It is used to provide leverage.
What is a Hand Screw Jack Extension Stop? 13 Items: A Hand Screw Jack Extension Stop (STOP,HAND SCREW JACK EXTENSION) is a metallic item which is attached to the end of an EXTENSION, HAND SCREW JACK to prevent its removal from the mating part of a JACK, SCREW, HAND.
What is a Hand Screw Jack Extension Cap? 11 Items: A Hand Screw Jack Extension Cap (CAP,HAND SCREW JACK EXTENSION) is a metallic item with a centrally located hole which holds an EXTENSION, HAND SCREW JACK in position and retains a BEARING, ROLLER, THRUST. It is designed to bear the weight of an object while raising or lowering a JACK, SCREW, HAND.
What is a Socket Head Screw Socket Wrench Attachment Wrench Set? 59 Items: A Socket Head Screw Socket Wrench Attachment Wrench Set (WRENCH SET,SOCKET HEAD SCREW SOCKET WRENCH ATTACHMENT) is an assortment of various size SOCKET WRENCH ATTACHMENT, SOCKET HEAD SCREW, and HANDLE, SOCKET WRENCH. It may include universal joints, ratcheting adapters and other attachments used therewith.
What is a Combination Box And Open End Box Wrench? 94 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Combination Box And Open End Box Wrench Set? 27 Items: A Combination Box And Open End Box Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END BOX) is a group of WRENCH, BOX AND OPEN END BOX, COMBINATION having various sizes.
What is an Electrical Connector Pin Straightener? 28 Items: An Electrical Connector Pin Straightener (PIN STRAIGHTENER,ELECTRICAL CONNECTOR) is a hand tool designed with a longitudinal hole in one or both end(s) to fit over a pin contact of an electrical connector. It is used to straighten or align the contact(s) of the connector.
What is a Mechanical Puller Forcing Screw? 142 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 671 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 216 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 868 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Screwdriver Bit Extension? 44 Items: A Screwdriver Bit Extension (EXTENSION,SCREWDRIVER BIT) is an item having one end designed to fit into the end of a screwdriver bit handle and the opposite end designed to accommodate a screwdriver bit. It is specifically designed to extend the length of a screwdriver bit.
What is a Torque Wrench Multiplier? 223 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Bushing Driver Set? 74 Items: A Bushing Driver Set is a group of various sized bushing drivers designed to install and remove bushings. It may include driver nuts, adapters, and the like.
What is a Screw Thread Insert Tang Breakoff Tool? 193 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 74 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 1197 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 1757 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 374 Items
Handle,Mallet 15 Items
Handle,Shovel 103 Items
What is a Socket Wrench Spanner Attachment? 347 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Torque Wrench Set? 91 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 240 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 96 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
Parts Kit,Hydraulic Jack 15 Items
What is a Socket Wrench Spanner Attachment Set? 30 Items: A Socket Wrench Spanner Attachment Set (SPANNER ATTACHMENT SET,SOCKET WRENCH) is an item having an adjustable or fixed span of pin and/or key type ends that may be replacable.
What is a Bearing And Bushing Inserter Set? 32 Items: A Bearing And Bushing Inserter Set (INSERTER SET,BEARING AND BUSHING) is a group of two or more INSERTER, BEARING AND BUSHING having different characteristics.
What is a Bearing And Bushing Inserter? 3198 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 896 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 3207 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 230 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 602 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 1283 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 324 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Preformed Packing Remover? 64 Items: A Preformed Packing Remover (REMOVER,PREFORMED PACKING) is a hand tool designed to remove a PACKING, PREFORMED.
What is a Drill Guide? 458 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Hand Fiber Optic Contact Crimping Tool? 24 Items: A Hand Fiber Optic Contact Crimping Tool (CRIMPING TOOL,FIBER OPTIC CONTACT,HAND) is a hand held tool designed to install various types of CONTACT, FIBER OPTIC on optical conductors.
What is a Connector Fiber Optic Contact Installation Tool? 10 Items: A Connector Fiber Optic Contact Installation Tool (INSTALLATION TOOL,CONNECTOR FIBER OPTIC CONTACT) is an item designed to facilitate the placement of CONTACT, FIBER OPTIC items into CONNECTOR, PLUG, FIBER OPTIC or a CONNECTOR, RECEPTACLE, FIBER OPTIC.
What is a Connector Fiber Optic Contact Removal Tool? 28 Items: A Connector Fiber Optic Contact Removal Tool (REMOVAL TOOL,CONNECTOR FIBER OPTIC CONTACT) is an item used to disassemble CONTACT, FIBER OPTIC from a CONNECTOR, PLUG, FIBER OPTIC or a CONNECTOR, RECEPTACLE, FIBER OPTIC.
What is a Leveling-Support Jack? 607 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Square Tip Screwdriver? 94 Items: A Square Tip Screwdriver (SCREWDRIVER,SQUARE TIP) is a manual screwdriver having a single nonremoveable blade with a tip for driving and removing screws with a square recessed head.
What is a Six Point Tip Screwdriver? 478 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 402 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 1161 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 87 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 183 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 128 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 257 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 175 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Bearing And Bushing Inserter And Remover Set? 82 Items: A Bearing And Bushing Inserter And Remover Set (INSERTER AND REMOVER SET,BEARING AND BUSHING) is a group of two or more INSERTER AND REMOVER, BEARING AND BUSHING having different characteristics.
What is a Piston Inserter? 180 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 258 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 155 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 132 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 89 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Stud Remover Set? 20 Items: A Stud Remover Set (REMOVER SET,STUD) is a group of various sized items designed to remove or extract studs. It may include guides, collets, collet housings, holders, and the like. It is without facilities to drive or set studs. See also INSERTER AND REMOVER, STUD AND INSERTER, STUD.
What is a Gear Inserter? 137 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 1180 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 130 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Leveling-Support Jack Set? 39 Items: A Leveling-Support Jack Set (JACK SET,LEVELING-SUPPORT) is consists of two or more JACK, LEVELING-SUPPORT.
What is a Hand Optical Fiber Burnisher? 23 Items: A Hand Optical Fiber Burnisher (BURNISHER,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to polish the ends of FIBER, OPTIC to a smooth surface.
What is a Float? 105 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 134 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 156 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 40 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Cable Tie Installation Tool? 118 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Nonsurgical Forceps? 38 Items: A Nonsurgical Forceps (FORCEPS,NONSURGICAL) is a device designed to hold another item by grasping it in its jaws and retaining the grasp with a snap-lock type catch on its handles. It will have straight or curved, needle nose type jaws and handles with thumb and finger holes. For items designed for surgical use see FORCEPS (as modified). For items without a catch type device on the handles see PLIERS and PLIERS (as modified). See also HEAT SINK, SOLDERING AID.
What is a Bearing Staking Installation Tool? 418 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 117 Items
What is a Sealant Dispenser? 187 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 129 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Six Point Tip Screwdriver Set? 124 Items: A Six Point Tip Screwdriver Set (SCREWDRIVER SET,SIX POINT TIP) is a group of SCREWDRIVER, SIX POINT TIP having different characteristics.
What is a Hand Armament Subsystem Carrier? 70 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Pedal Adjustment Tool Compressor? 54 Items: A Pedal Adjustment Tool Compressor (COMPRESSOR,TOOL,PEDAL ADJUSTMENT) is a hand tool having hinged leverage handles designed to compress both ends of a spring to facilitate installation.
What is a Ring Retaining Pliers Tip Set? 37 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 109 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Bearing Installation Tool Base? 83 Items: A Bearing Installation Tool Base (TOOL BASE,BEARING INSTALLATION) is the base of a hand tool used for seating bearings. It may be attached to a DRILLING MACHINE (as modified) to secure bearings wherever necessary to contain the bearing within its assembly.
What is a Torque Wrench Adapter Set? 63 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is a Gas Torch? 31 Items: A Gas Torch (TORCH,GAS) is an item used for sweating, brazing, thawing, soldering, and the like, using concentrated heat obtained from combustible gases/gaseous mixtures.
What is an Electronic Component Inserter And Remover? 142 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 37 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Fuel Injection Nozzle Extractor? 37 Items: A Fuel Injection Nozzle Extractor (EXTRACTOR,FUEL INJECTION NOZZLE) is a hand tool designed specifically for extracting fuel nozzles from an internal combustion engine.
What is a Torque Handle? 102 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Hand Vise Jaw? 53 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Digging Pick Head? 13 Items: A Digging Pick Head (PICK HEAD,DIGGING) is an iron or steel double-tinted tool with provision for a handle to be inserted in an eye between the ends. The ends of the tines may both be pointed or one pointed and one chisel edge or flat faced. It is used for mining, roadmaking and stone dressing. Does not include a handle. See also PICK, DIGGING.
What is a Screwdriver Handle? 160 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is an Expansion Shield Setting Tool? 10 Items: An Expansion Shield Setting Tool (TOOL,SETTING,EXPANSION SHIELD) is a setting tool specifically designed to expand shields to fix them into hollow walls built with canty concrete blocks, gypsum boards, hollow bricks and the like.
What is a Turnlock Fastener Clinching Punch? 34 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Fin Straightener? 21 Items: A Fin Straightener (STRAIGHTENER,FIN) is an item designed to straighten refrigerator evaporator fins, heat exchanger fins and the like.
What is a Wire Twister Pliers? 134 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Sleeve Stretching Pliers? 17 Items: A Sleeve Stretching Pliers (PLIERS,SLEEVE STRETCHING) is a pair of pliers fitted with a two or three prong chuck. It is designed to install sleeves or identification bushings on the end of wire leads or cables. Excludes: COMPRESSING TOOL, SPLICING SLEEVE and CRIMPING TOOL, TERMINAL HAND.
What is a Socket Wrench Screwdriver Attachment? 2612 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Socket Wrench Crowfoot Attachment Set? 63 Items: A Socket Wrench Crowfoot Attachment Set (CROWFOOT ATTACHMENT SET,SOCKET WRENCH) is a group of various sized CROWFOOT ATTACHMENT, SOCKET WRENCH. It may include a holder or the like. Excludes WRENCH SET, CROWFOOT, RATCHETING.
What is an Inspection Mirror Head? 22 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Mechanical Puller Body? 63 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 325 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 154 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 193 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Craftsman's Tweezers Set? 24 Items: A Craftsman's Tweezers Set (TWEEZERS SET,CRAFTSMAN'S) is a collection of TWEEZERS, CRAFTMAN'S having different characteristics.
What is a Turnlock Fastener Inserter And Remover? 32 Items: A Turnlock Fastener Inserter And Remover (INSERTER AND REMOVER,TURNLOCK FASTENER) is a hand tool designed to insert or remove a FASTENER ASSEMBLY, TURNLOCK.
What is a Blind Riveter Nosepiece? 50 Items: A Blind Riveter Nosepiece (NOSEPIECE,RIVETER,BLIND) is an item specifically designed for use with a RIVETER, BLIND (as modified).
What is a Blind Riveter Mandrel? 36 Items: A Blind Riveter Mandrel (MANDREL,RIVETER,BLIND) is an item specifically designed for use with a RIVETER, BLIND (as modified).
What is a Torque Wrench Adapter? 3954 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 106 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 235 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 136 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 172 Items
What is a Splicing Sleeve Compressing Tool? 158 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 48 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
Extractor,Electronic Crystal Unit 12 Items
What is a Full Tracked Vehicle Track Connecting Fixture? 38 Items: A Full Tracked Vehicle Track Connecting Fixture (FIXTURE,TRACK CONNECTING,FULL TRACKED VEHICLE) is a fixture used to pull together two track ends, of a full tracked vehicle, for the purpose of connection. May also be used for holding the tension of a track while replacing a link.
What is a Hand Caster Fork? 13 Items: A Hand Caster Fork (FORK,CASTER,HAND) is a hand tool designed to rotate casters to a locking position while under stress of the load imposed thereon.
What is a Mechanical Puller Gear Adapter? 35 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 179 Items
Handle,Mechanical Jack 99 Items
What is a Projectile Holding Tool? 11 Items: A Projectile Holding Tool (HOLDING TOOL,PROJECTILE) is a hand tool specifically designed to facilitate the holding of a projectile in a fixed position during assembly and/or disassembly operations.
What is a Bushing Extracting Pliers? 22 Items: A Bushing Extracting Pliers (PLIERS,BUSHING EXTRACTING) is a tool having special shaped jaws designed for use in extracting bushings.
What is a Female Electrical Contact Resizing Tool? 20 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 165 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 44 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 66 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 109 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is an Automatic Center Punch Tip? 10 Items: An Automatic Center Punch Tip (TIP,AUTOMATIC CENTER PUNCH) is an item made from hardened metal designed to be attached to the end of a PUNCH, CENTER, AUTOMATIC for making indentations. The attaching end must be threaded or have other means of attaching.
What is a Combination Lock Reset Key? 17 Items: A Combination Lock Reset Key (KEY,RESET,COMBINATION LOCK) is an item specifically designed to be inserted in a combination lock to allow free movement of the tumblers and setting of a desired combination.
What is a Stake Puller Kit? 14 Items: A Stake Puller Kit (PULLER KIT,STAKE) is a collection of items, such as a tripod, pulley, and retrieving cable, specifically designed for rapid extraction of ground rods, stakes, and the like, used to ground or anchor equipment(s). It is normally used with a special sling, and may include a storage bag or case. Excludes PULLER, MECHANICAL and PULLER KIT, MECHANICAL.
What is an Electronics Pliers? 44 Items: An Electronics Pliers (PLIERS,ELECTRONICS) is a tool with clamping jaws for special works in the field of microelectronics and on circuit boards. See also PLIERS and PLIERS (as modified).
What is a Drift? 473 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hand Tube Flaring Tool Parts Kit? 15 Items: A Hand Tube Flaring Tool Parts Kit (PARTS KIT,FLARING TOOL,TUBE,HAND) is a group of parts used to replace worn or damaged parts of a FLARING TOOL, TUBE, HAND.
What is a Fish Tape? 43 Items: A Fish Tape (TAPE,FISH) is excludes FISHING TOOL, ELECTRICAL LEAD.
What is a Nutdriver? 817 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 71 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Palm-Grip Ratchet Wrench? 13 Items: A Palm-Grip Ratchet Wrench (WRENCH,RATCHET,PALM-GRIP) is a round or contoured comfortable hand grip with a ratchet-mechanism and a shifting lever for reversing the ratchet direction. It has a square male drive with a spring-load steel ball to hold mating sockets and attachments. Excludes WRENCH, RATCHET and HANDLE, SOCKET WRENCH.
What is a Nutdriver Set? 76 Items: A Nutdriver Set is an assortment of NUTDRIVER'S having various sizes, all of which have a screwdriver style handle, shaft and formed female hex or square socket at the driving end.
What is a Switch Adjusting Tool? 21 Items: A Switch Adjusting Tool (ADJUSTING TOOL,SWITCH) is an item used to adjust the quick acting mechanism of a SWITCH, SENSITIVE and other switches as modified.
What is a Ball Joint Installation Tool? 22 Items: A Ball Joint Installation Tool (INSTALLATION TOOL,BALL JOINT) is an item used to mount a BALL JOINT.
What is a Ball Joint Removal Tool? 28 Items: A Ball Joint Removal Tool (REMOVAL TOOL,BALL JOINT) is an item used to remove a BALL JOINT.
What is a Fibrous Rope Splicing Kit? 13 Items: A Fibrous Rope Splicing Kit (SPLICING KIT,FIBROUS ROPE) is a collection of items to facilitate connecting ends or making loops in similar pieces of braided or twisted synthetic or natural fibers. Item includes fids, pushers and the like.
What is a Hydraulic Fitting Crimping Tool Head? 67 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Socket Wrench Extension Set? 36 Items: A Socket Wrench Extension Set (EXTENSION SET,SOCKET WRENCH) is a group of EXTENSION, SOCKET WRENCH having various characteristics.
What is a Torque Screwdriver? 351 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Ratchet Driven Jack? 12 Items: A Ratchet Driven Jack (JACK,RATCHET DRIVEN) is a multi-function mechanical ratchet type jack that can be used for lifting, pushing, pulling, and clamping. Includes adjustable top clamp clevis for use in pulling and clamping operations.
What is a Stake Remover? 25 Items: A Stake Remover (REMOVER,STAKE) is a hand tool designed to facilitate the removal of a STAKE (as modified) from the ground.
What is a Clip Remover? 16 Items: A Clip Remover (REMOVER,CLIP) is a tool specifically designed to facilitate the removal of a clip (as modified).
What is a Starter Punch? 107 Items: A Starter Punch (PUNCH,STARTER) is a hand tool for installing and removing pins and keys and removing rivets. The point is tapered round with a blunt face. Excludes PUNCH, CENTER, SOLID.
What is a Special Purpose Combination Wrench? 117 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Loop Clamp Inserter? 11 Items: A Loop Clamp Inserter (INSERTER,CLAMP,LOOP) is an item designed for installing the different elements of a CLAMP, LOOP.
What is a Reinforcing Bar Bending Bar? 10 Items: A Reinforcing Bar Bending Bar (BAR,BENDING,REINFORCING BAR) is a hand tool designed to bend concrete reinforcing bars. Excludes, BENDER, TUBE, HAND.
What is a Screwdriver Bit Holder? 166 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 116 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.
What is a Pole Extension? 57 Items: A Pole Extension (EXTENSION,POLE) is an item designed to be mounted on a telescopic or rigid pole that is used to increase its length.
What is a Regulator Spring Adjusting Tool? 11 Items: A Regulator Spring Adjusting Tool (ADJUSTING TOOL,REGULATOR SPRING) is an item designed to adjust the spring of a regulator balancing chamber.
What is a Pry Bar Set? 15 Items: A Pry Bar Set (BAR SET,PRY) is a group of PRY Bars having different characteristics.
What is a Hand Pick And Hook Set? 12 Items: A Hand Pick And Hook Set (PICK AND HOOK SET,HAND) is a group of two or more hooks having different sizes and characteristics for insertion and removal o-rings, gaskets and springs.
What is a Strap Wrench? 43 Items: A Strap Wrench (WRENCH,STRAP) is wrench which primarily consists of a handle provided with a strap or girth. It is designed to impart a rotary movement of force to a cylindrical part or without footprint for tool receiving. For items specially designed for oil filters or tubes see CLE,OIL FILTER (53484) or CLE TUBE CLAMP (03492).
What is a Cotter Key Puller? 11 Items: A Cotter Key Puller (PULLER,COTTER KEY) is a hand tool with a curved tip for prying loose cotter keys (pins).
What is a Mechanical Puller Section? 16 Items: A Mechanical Puller Section (PULLER SECTION,MECHANICAL) is an item which constitutes a part of a PULLER,MECHANICAL (18913). Do not use if a more specific designation is appropriate. Excludes: BODY,PULLER,MECHANICAL (53210);STEP PLATE, MECHANICAL PULLER (20185).

Stock Items From Supply Class 5120 Page 64of 880

5120-01-435-0669
Inserted Hammer Face

014350669
69-163: RNCC: 3 | RNVC: 2
69-163: RNCC: 3 | RNVC: 9
69-163: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0674
Inserted Hammer Face

014350674
69-185: RNCC: 3 | RNVC: 2
69-185: RNCC: 3 | RNVC: 9
69-185: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0671
Inserted Hammer Face

014350671
69-176: RNCC: 3 | RNVC: 2
69-176: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0645
Inserted Hammer Face

014350645
69-151: RNCC: 3 | RNVC: 2
69-151: RNCC: 3 | RNVC: 9
69-151: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0642
Inserted Hammer Face

014350642
69-148: RNCC: 3 | RNVC: 2
69-148: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0656
Inserted Hammer Face

014350656
69-189: RNCC: 3 | RNVC: 2
69-189: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0662
Slip Joint Pliers

014350662
67-767: RNCC: 3 | RNVC: 2
67-767: RNCC: 3 | RNVC: 9
67-767: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0659
Inserted Hammer Face

014350659
69-183: RNCC: 3 | RNVC: 2
69-183: RNCC: 3 | RNVC: 9
69-183: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0644
Inserted Hammer Face

014350644
69-188: RNCC: 3 | RNVC: 2
69-188: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0649
Inserted Hammer Face

014350649
69-168: RNCC: 3 | RNVC: 2
69-168: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0625
Inserted Hammer Face

014350625
69-146: RNCC: 3 | RNVC: 2
69-146: RNCC: 3 | RNVC: 9
69-146: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0628
Inserted Hammer Face

014350628
69-166: RNCC: 3 | RNVC: 2
69-166: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0641
Inserted Hammer Face

014350641
69-156: RNCC: 3 | RNVC: 2
69-156: RNCC: 3 | RNVC: 9
69-156: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0648
Inserted Hammer Face

014350648
69-171: RNCC: 3 | RNVC: 2
69-171: RNCC: 3 | RNVC: 9
69-171: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0639
Slip Joint Pliers

014350639
67-783: RNCC: 3 | RNVC: 2
67-783: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0626
Inserted Hammer Face

014350626
69-155: RNCC: 3 | RNVC: 1
69-155: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0629
Inserted Hammer Face

014350629
69-182: RNCC: 3 | RNVC: 2
69-182: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0638
Inserted Hammer Face

014350638
69-175: RNCC: 3 | RNVC: 2
69-175: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0627
Inserted Hammer Face

014350627
69-186: RNCC: 3 | RNVC: 2
69-186: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0619
Inserted Hammer Face

014350619
69-169: RNCC: 3 | RNVC: 2
69-169: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0633
Slip Joint Pliers

014350633
67-771: RNCC: 3 | RNVC: 2
67-771: RNCC: 3 | RNVC: 9
67-771: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0636
Inserted Hammer Face

014350636
69-179: RNCC: 3 | RNVC: 2
69-179: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0632
Inserted Hammer Face

014350632
69-142: RNCC: 3 | RNVC: 2
69-142: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0622
Inserted Hammer Face

014350622
69-141: RNCC: 3 | RNVC: 2
69-141: RNCC: 3 | RNVC: 9
69-141: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0623
Inserted Hammer Face

014350623
69-161: RNCC: 3 | RNVC: 2
69-161: RNCC: 5 | RNVC: 9

13 Aug 1996

5120-01-435-0022
Socket Head Screw Key

014350022
86752: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-435-0021
Socket Head Screw Key

014350021
86506: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-435-0023
Socket Head Screw Key

014350023
86753: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-435-0013
Nutdriver

014350013
8: RNCC: 3 | RNVC: 9
8: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-435-0010
Craftsman's Tweezers

12 Aug 1996

5120-01-435-0019
Craftsman's Tweezers

12 Aug 1996

5120-01-435-0007
Craftsman's Tweezers

12 Aug 1996

5120-01-435-0008
Flat Tip Screwdriver

014350008
R1810: RNCC: 3 | RNVC: 9
R1810: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9981
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9984
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9919
Plier Wrench

12 Aug 1996

5120-01-434-9959
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9978
Flat Tip Screwdriver

014349978
2243-10: RNCC: 3 | RNVC: 9
2243-10: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9975
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9961
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9972
Flat Tip Screwdriver

12 Aug 1996

NSN 5120-01-434-9955 014349955 SCREWDRIVER,FLAT TIP

5120-01-434-9955
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9962
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9963
Cross Tip Screwdriver

12 Aug 1996

5120-01-434-9957
Flat Tip Screwdriver

014349957
2142-4: RNCC: 3 | RNVC: 9
2142-4: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9953
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9935
Socket Head Screw Key

014349935
86860: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9941
Socket Head Screw Key

014349941
86857: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9954
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9946
Socket Head Screw Key

014349946
86864: RNCC: 3 | RNVC: 2

12 Aug 1996

NSN 5120-01-434-9958 014349958 SCREWDRIVER,CROSS TIP

5120-01-434-9958
Cross Tip Screwdriver

12 Aug 1996

5120-01-434-9945
Socket Head Screw Key

014349945
86862: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9927
Socket Head Screw Key

014349927
86710: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9936
Socket Head Screw Key

014349936
86706: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9938
Socket Head Screw Key

014349938
86861: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9923
Plier Wrench

12 Aug 1996

5120-01-434-9925
Socket Head Screw Key

014349925
86707: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9930
Socket Head Screw Key

014349930
86712: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9931
Socket Head Screw Key

014349931
86215: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9937
Socket Head Screw Key

014349937
86709: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9933
Socket Head Screw Key

014349933
86705: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9934
Socket Head Screw Key

014349934
86859: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9939
Socket Head Screw Key

014349939
86863: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9928
Socket Head Screw Key

014349928
86711: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9926
Plier Wrench

12 Aug 1996

5120-01-434-9924
Socket Head Screw Key

014349924
86704: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9917
Socket Head Screw Key

014349917
86212: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9929
Socket Head Screw Key

014349929
86708: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9913
Plier Wrench

12 Aug 1996

5120-01-434-9910
Plier Wrench

12 Aug 1996

5120-01-434-9911
Plier Wrench

12 Aug 1996

5120-01-434-9916
Plier Wrench

12 Aug 1996

5120-01-434-9918
Plier Wrench

12 Aug 1996

5120-01-434-9920
Socket Head Screw Key

014349920
86213: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9908
Plier Wrench

12 Aug 1996

5120-01-434-9907
Slip Joint Pliers

014349907
78C: RNCC: 3 | RNVC: 9
78C: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9872
C Clamp

014349872
78-108: RNCC: 3 | RNVC: 2
78-108: RNCC: 3 | RNVC: 9
78-108: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9879
Pliers

014349879
31-8: RNCC: 3 | RNVC: 9
31-8: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9881
Pliers

014349881
82-8: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9858
C Clamp

014349858
78-103: RNCC: 3 | RNVC: 2
78-103: RNCC: 3 | RNVC: 9
78-103: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9859
C Clamp

014349859
78-102: RNCC: 3 | RNVC: 2
78-102: RNCC: 3 | RNVC: 9
78-102: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9870
C Clamp

014349870
78-107: RNCC: 3 | RNVC: 2
78-107: RNCC: 3 | RNVC: 9
78-107: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9866
C Clamp

014349866
78-673: RNCC: 3 | RNVC: 2
78-673: RNCC: 3 | RNVC: 9
78-673: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9852
C Clamp

014349852
78-080: RNCC: 3 | RNVC: 2
78-080: RNCC: 3 | RNVC: 9
78-080: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9862
C Clamp

014349862
78-106: RNCC: 3 | RNVC: 2
78-106: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9863
C Clamp

014349863
78-672: RNCC: 3 | RNVC: 2
78-672: RNCC: 3 | RNVC: 9
78-672: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9855
C Clamp

014349855
78-081: RNCC: 3 | RNVC: 2
78-081: RNCC: 3 | RNVC: 9
78-081: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9864
C Clamp

014349864
78-638: RNCC: 3 | RNVC: 2
78-638: RNCC: 3 | RNVC: 9
78-638: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9854
C Clamp

014349854
78-091: RNCC: 3 | RNVC: 2
78-091: RNCC: 3 | RNVC: 9
78-091: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9856
C Clamp

014349856
78-093: RNCC: 3 | RNVC: 2
78-093: RNCC: 3 | RNVC: 9
78-093: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9832
Tapered Punch

014349832
70-199: RNCC: 3 | RNVC: 2
70-199: RNCC: 3 | RNVC: 9
70-199: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9844
Tapered Punch

014349844
70-197: RNCC: 3 | RNVC: 2
70-197: RNCC: 3 | RNVC: 9
70-197: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9826
Tapered Punch

014349826
70-189: RNCC: 3 | RNVC: 2
70-189: RNCC: 3 | RNVC: 9
70-189: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9841
Aligning Punch

014349841
70-221: RNCC: 3 | RNVC: 2
70-221: RNCC: 3 | RNVC: 9
70-221: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9823
Tapered Punch

014349823
70-187: RNCC: 3 | RNVC: 2
70-187: RNCC: 3 | RNVC: 9
70-187: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9822
Flat Tip Screwdriver

014349822
S3164: RNCC: 3 | RNVC: 9
S3164: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9831
Flat Tip Screwdriver

014349831
S148: RNCC: 3 | RNVC: 9
S148: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9836
Tapered Punch

014349836
70-201: RNCC: 3 | RNVC: 2
70-201: RNCC: 3 | RNVC: 9
70-201: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9849
C Clamp

014349849
78-061: RNCC: 3 | RNVC: 2
78-061: RNCC: 3 | RNVC: 9
78-061: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9813
Starter Punch

014349813
70-159: RNCC: 3 | RNVC: 2
70-159: RNCC: 3 | RNVC: 9
70-159: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9815
Flat Tip Screwdriver

014349815
S146: RNCC: 3 | RNVC: 9
S146: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9821
Starter Punch

014349821
70-167: RNCC: 3 | RNVC: 2
70-167: RNCC: 3 | RNVC: 9
70-167: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9814
Flat Tip Screwdriver

014349814
B107.600: RNCC: 3 | RNVC: 1
B107.15 TY2: RNCC: 5 | RNVC: 1
B107.15: RNCC: 5 | RNVC: 1
S141: RNCC: 5 | RNVC: 2
S141: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9798
Nutdriver

014349798
3709: RNCC: 3 | RNVC: 9
3709: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9775
Scratch Awl

014349775
2245: RNCC: 3 | RNVC: 9
2245: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9800
Slip Joint Pliers

014349800
HL18P: RNCC: 3 | RNVC: 2
HL18P: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9796
Slip Joint Pliers

014349796
HL112P: RNCC: 3 | RNVC: 2
HL112P: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9793
Nutdriver

014349793
3706: RNCC: 3 | RNVC: 9
3706: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9783
Socket Wrench

014349783
3710: RNCC: 3 | RNVC: 9
3710: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9782
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9781
Socket Wrench

014349781
3707: RNCC: 3 | RNVC: 9
3707: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9780
Six Point Tip Screwdriver

014349780
CTD-25: RNCC: 3 | RNVC: 9
CTD-25: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9778
Brake Repair Pliers

014349778
67-887: RNCC: 3 | RNVC: 2
67-887: RNCC: 3 | RNVC: 9
67-887: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9791
Pliers

014349791
67-837: RNCC: 3 | RNVC: 2
67-837: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9777
Six Point Tip Screwdriver

014349777
CTD-20: RNCC: 3 | RNVC: 9

12 Aug 1996

5120-01-434-9790
Slip Joint Pliers

014349790
HL110: RNCC: 3 | RNVC: 9
HL110: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9789
Slip Joint Pliers

014349789
K36H: RNCC: 3 | RNVC: 9
K36H: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9786
Socket Wrench

014349786
3711: RNCC: 3 | RNVC: 9
3711: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9771
Flat Tip Screwdriver

014349771
3143-6V: RNCC: 3 | RNVC: 9
3143-6V: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9785
Cross Tip Screwdriver

014349785
3302: RNCC: 3 | RNVC: 9
3302: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9773
Cross Tip Screwdriver

12 Aug 1996

5120-01-434-9772
Hose Clamp Pliers

014349772
67-699: RNCC: 3 | RNVC: 2
67-699: RNCC: 3 | RNVC: 9
67-699: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9769
Cross Tip Screwdriver

12 Aug 1996

5120-01-434-9764
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9767
Six Point Tip Screwdriver

014349767
CTD-15: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9765
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9757
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9762
Six Point Tip Screwdriver

014349762
CTD-6: RNCC: 3 | RNVC: 9
CTD-6: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9763
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9745
Socket Head Screw Key

014349745
84306: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9751
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9744
Socket Head Screw Key

014349744
84414: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9731
Socket Head Screw Key

014349731
84407: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9732
Socket Head Screw Key

014349732
84408: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9742
Hand Tube Flaring Tool

12 Aug 1996

5120-01-434-9739
Socket Head Screw Key

014349739
84413: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9738
Socket Head Screw Key

014349738
84409: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9741
Socket Head Screw Key

014349741
84411: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9733
Socket Head Screw Key

014349733
84410: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9734
Socket Head Screw Key

014349734
84412: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9735
Socket Head Screw Key

014349735
84406: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9736
Socket Head Screw Key

014349736
84415: RNCC: 3 | RNVC: 2

12 Aug 1996

NSN 5120-01-434-9726 014349726 CLAMP,PLIER

5120-01-434-9726
Plier Clamp

12 Aug 1996

NSN 5120-01-434-9719 014349719 CLAMP,PLIER

5120-01-434-9719
Plier Clamp

12 Aug 1996

5120-01-434-9729
Plier Clamp

014349729
9R: RNCC: 3 | RNVC: 2

12 Aug 1996

NSN 5120-01-434-9717 014349717 CLAMP,PLIER

5120-01-434-9717
Plier Clamp

12 Aug 1996

5120-01-434-9714
Flat Tip Screwdriver

014349714
B107.600: RNCC: 3 | RNVC: 1
B107.15: RNCC: 5 | RNVC: 1
B107.15 TY2: RNCC: 5 | RNVC: 1
R5166: RNCC: 5 | RNVC: 2
R5166: RNCC: 5 | RNVC: 9

12 Aug 1996

NSN 5120-01-434-9727 014349727 CLAMP,PLIER

5120-01-434-9727
Plier Clamp

12 Aug 1996

5120-01-434-9694
Socket Wrench Socket

12 Aug 1996

5120-01-434-9718
Flat Tip Screwdriver

014349718
S3168: RNCC: 3 | RNVC: 9
S3168: RNCC: C | RNVC: 1

12 Aug 1996

5120-01-434-9720
Six Point Tip Screwdriver

014349720
XTD-6: RNCC: 3 | RNVC: 9
XTD-6: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9703
Cross Tip Screwdriver

12 Aug 1996

5120-01-434-9706
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9705
Cross Tip Screwdriver

12 Aug 1996

5120-01-434-9704
Flat Tip Screwdriver

014349704
R3610: RNCC: 3 | RNVC: 9
R3610: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9696
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9701
Rawhide Mallet

014349701
13001: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9698
Rawhide Mallet

014349698
13002: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9695
C Clamp

014349695
78-333: RNCC: 3 | RNVC: 2
78-333: RNCC: 3 | RNVC: 9
78-333: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9689
Open End Box Wrench

014349689
21511: RNCC: 3 | RNVC: 2
21511: RNCC: 3 | RNVC: 9
21511: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9693
C Clamp

014349693
78-304: RNCC: 3 | RNVC: 2
78-304: RNCC: 3 | RNVC: 9
78-304: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9690
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9682
C Clamp

014349682
78-111: RNCC: 3 | RNVC: 2
78-111: RNCC: 3 | RNVC: 9
78-111: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9691
Socket Wrench Handle

014349691
B107.10: RNCC: 3 | RNVC: 1
B107.10 TY1CL2: RNCC: 5 | RNVC: 1
11904: RNCC: 5 | RNVC: 1
B107.10 TY1CL2: RNCC: 5 | RNVC: 1
B107.10M: RNCC: 5 | RNVC: 9
11904: RNCC: 5 | RNVC: 9
B107.10M TY1CL2: RNCC: 5 | RNVC: 9
B107.10M TY1CL2: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9688
C Clamp

014349688
78-116: RNCC: 3 | RNVC: 2
78-116: RNCC: 3 | RNVC: 9
78-116: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9684
C Clamp

014349684
78-118: RNCC: 3 | RNVC: 2
78-118: RNCC: 3 | RNVC: 9
78-118: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9687
C Clamp

014349687
78-306: RNCC: 3 | RNVC: 2
78-306: RNCC: 3 | RNVC: 9
78-306: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9680
Socket Head Screw Key

014349680
LN6MM: RNCC: 3 | RNVC: 2
LN6MM: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9681
Socket Head Screw Key

014349681
LN764BP: RNCC: 3 | RNVC: 2
LN764BP: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9679
C Clamp

014349679
78-308: RNCC: 3 | RNVC: 2
78-308: RNCC: 3 | RNVC: 9
78-308: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9670
C Clamp

014349670
78-119: RNCC: 3 | RNVC: 2
78-119: RNCC: 3 | RNVC: 9
78-119: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9678
C Clamp

014349678
78-112: RNCC: 3 | RNVC: 1
78-112: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9674
C Clamp

014349674
78-303: RNCC: 3 | RNVC: 2
78-303: RNCC: 3 | RNVC: 9
78-303: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9666
Socket Head Screw Key

014349666
LN27: RNCC: 3 | RNVC: 1
LN27: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9653
C Clamp

014349653
78-109: RNCC: 3 | RNVC: 2
78-109: RNCC: 3 | RNVC: 9
78-109: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9662
C Clamp

014349662
78-113: RNCC: 3 | RNVC: 2
78-113: RNCC: 3 | RNVC: 9
78-113: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9667
Socket Head Screw Key

014349667
LN22BP: RNCC: 3 | RNVC: 2
LN22BP: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9655
Socket Head Screw Key

014349655
LN964: RNCC: 3 | RNVC: 1
LN964: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9652
Socket Head Screw Key

014349652
LN4MM: RNCC: 3 | RNVC: 2
LN4MM: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9637
Socket Head Screw Key

014349637
LN-1.27MM: RNCC: 3 | RNVC: 9

12 Aug 1996

5120-01-434-9599
Prick Punch

014349599
70-253: RNCC: 3 | RNVC: 2
70-253: RNCC: 3 | RNVC: 9
70-253: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9606
Solid Center Punch

014349606
70-239: RNCC: 3 | RNVC: 2
70-239: RNCC: 3 | RNVC: 9
70-239: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9579
Hand Hammer

014349579
69-517: RNCC: 3 | RNVC: 2
69-517: RNCC: 3 | RNVC: 9
69-517: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9577
Pliers

014349577
CN777-6: RNCC: 3 | RNVC: 9
CN777-6: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9574
Pliers

014349574
DN54-CG: RNCC: 3 | RNVC: 9
DN54-CG: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9565
Hand Hammer

014349565
69-480: RNCC: 3 | RNVC: 2
69-480: RNCC: 3 | RNVC: 9
69-480: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9567
Hand Hammer

014349567
69-440: RNCC: 3 | RNVC: 2
69-440: RNCC: 3 | RNVC: 9
69-440: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9571
Prick Punch

014349571
70-257: RNCC: 3 | RNVC: 2
70-257: RNCC: 3 | RNVC: 9
70-257: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9563
Pliers

014349563
SN56PH: RNCC: 3 | RNVC: 9
SN56PH: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9548
Hand Hammer

014349548
69-308: RNCC: 3 | RNVC: 2
69-308: RNCC: 3 | RNVC: 9
69-308: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9550
Hand Hammer

014349550
69-330: RNCC: 3 | RNVC: 2
69-330: RNCC: 3 | RNVC: 9
69-330: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9549
Hand Hammer

014349549
69-605: RNCC: 3 | RNVC: 2
69-605: RNCC: 3 | RNVC: 9
69-605: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9542
Pliers

014349542
SN54: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9530
Hand Hammer

014349530
69-350: RNCC: 3 | RNVC: 2
69-350: RNCC: 3 | RNVC: 9
69-350: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9526
Inserted Hammer Face Holder

014349526
69-001: RNCC: 3 | RNVC: 1
69-001: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9525
Pliers

014349525
LN56PH: RNCC: 3 | RNVC: 9
LN56PH: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9517
Hand Hammer

014349517
69-452: RNCC: 3 | RNVC: 2
69-452: RNCC: 3 | RNVC: 9
69-452: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9511
Inserted Hammer Face Holder

014349511
69-003: RNCC: 3 | RNVC: 2
69-003: RNCC: 3 | RNVC: 9
69-003: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9514
Slip Joint Pliers

014349514
923-7: RNCC: 3 | RNVC: 9
923-7: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9501
Socket Head Screw Key

014349501
84458: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9502
Hand Hammer

014349502
69-412: RNCC: 3 | RNVC: 2
69-412: RNCC: 3 | RNVC: 9
69-412: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9497
Socket Head Screw Key

014349497
84456: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9494
Hand Hammer

014349494
69-406: RNCC: 3 | RNVC: 2
69-406: RNCC: 3 | RNVC: 9
69-406: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9491
Socket Head Screw Key

014349491
84315: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9488
Socket Head Screw Key

014349488
84314: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9483
Hand Hammer

014349483
69-310: RNCC: 3 | RNVC: 2
69-310: RNCC: 3 | RNVC: 9
69-310: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9485
Socket Head Screw Key

014349485
84310: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9482
Socket Head Screw Key

014349482
84454: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9475
Socket Head Screw Key

014349475
86761: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9480
Socket Head Screw Key

014349480
84309: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9474
Socket Head Screw Key

014349474
84312: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9470
Inserted Hammer Face Holder

014349470
69-009: RNCC: 3 | RNVC: 2
69-009: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9467
Socket Head Screw Key

014349467
84311: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9466
Socket Head Screw Key

014349466
86757: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9462
Socket Head Screw Key

014349462
86754: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9458
Socket Head Screw Key

014349458
86762: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9450
Socket Head Screw Key

014349450
84361: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9448
Socket Head Screw Key

014349448
86758: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9449
Rawhide Mallet

014349449
11005: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9437
Socket Head Screw Key

014349437
84457: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9442
Socket Head Screw Key

014349442
86614: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9444
Socket Head Screw Key

014349444
86755: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9443
Socket Head Screw Key

014349443
84356: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9433
Socket Head Screw Key

014349433
84363: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9436
Socket Head Screw Key

014349436
86611: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9429
Socket Head Screw Key

014349429
86615: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9434
Pliers

014349434
LN775-5 1/2: RNCC: 3 | RNVC: 9
LN775-5 1/2: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9435
Socket Head Screw Key

014349435
84463: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9432
Socket Head Screw Key

014349432
86610: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9424
Socket Head Screw Key

014349424
84354: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9426
Socket Head Screw Key

014349426
84357: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9423
Socket Head Screw Key

014349423
86186: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9425
Socket Head Screw Key

014349425
84455: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9428
Socket Head Screw Key

014349428
86607: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9420
Socket Head Screw Key

014349420
86608: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9416
Socket Head Screw Key

014349416
86809: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9418
Socket Head Screw Key

014349418
86182: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9417
Socket Head Screw Key

014349417
84313: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9422
Socket Head Screw Key

014349422
86714: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9415
Socket Head Screw Key

014349415
86605: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9421
Socket Head Screw Key

014349421
84459: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9412
Socket Head Screw Key

014349412
86180: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9409
Socket Head Screw Key

014349409
86805: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9413
Socket Head Screw Key

014349413
86187: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9410
Socket Head Screw Key

014349410
86715: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9404
Socket Head Screw Key

014349404
86183: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9400
Socket Head Screw Key

014349400
86806: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9408
Socket Head Screw Key

014349408
84308: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9403
Socket Head Screw Key

014349403
84307: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9405
Socket Head Screw Key

014349405
86802: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9406
Socket Head Screw Key

014349406
86810: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9398
Socket Head Screw Key

014349398
86804: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9399
Socket Head Screw Key

014349399
86760: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9391
Socket Head Screw Key

014349391
86756: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9402
Socket Head Screw Key

014349402
86807: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9401
Socket Head Screw Key

014349401
86856: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9393
Socket Head Screw Key

014349393
86759: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9397
Socket Head Screw Key

014349397
86801: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9395
Socket Head Screw Key

014349395
86852: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9394
Socket Head Screw Key

014349394
86764: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9387
Socket Head Screw Key

014349387
86763: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9384
Socket Head Screw Key

014349384
86511: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9383
Socket Head Screw Key

014349383
86853: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9385
Socket Head Screw Key

014349385
86854: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9375
Socket Head Screw Key

014349375
84358: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9377
Nutdriver

014349377
14: RNCC: 3 | RNVC: 9
14: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9378
Socket Head Screw Key

014349378
84359: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9358
Socket Head Screw Key

014349358
86606: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9376
Socket Head Screw Key

014349376
86505: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9373
Socket Head Screw Key

014349373
86210: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9368
Socket Head Screw Key

014349368
84355: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9370
Socket Head Screw Key

014349370
86512: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9374
Socket Head Screw Key

014349374
86513: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9362
Nutdriver

014349362
16: RNCC: 3 | RNVC: 9
16: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9372
Socket Head Screw Key

014349372
86613: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9360
Nutdriver

014349360
12: RNCC: 3 | RNVC: 9
12: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9363
Socket Head Screw Key

014349363
84461: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9364
Socket Head Screw Key

014349364
86206: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9367
Socket Head Screw Key

014349367
86612: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9366
Socket Head Screw Key

014349366
86508: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9353
Socket Wrench

014349353
11: RNCC: 3 | RNVC: 9
11: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9356
Socket Head Screw Key

014349356
86211: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9359
Socket Head Screw Key

014349359
86609: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9357
Socket Head Screw Key

014349357
86188: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9350
Socket Wrench

014349350
9: RNCC: 3 | RNVC: 9
9: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9351
Socket Head Screw Key

014349351
86185: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9352
Socket Head Screw Key

014349352
86812: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9348
Socket Head Screw Key

014349348
86713: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9347
Socket Head Screw Key

014349347
86184: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9342
Socket Head Screw Key

014349342
86204: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9346
Socket Head Screw Key

014349346
86207: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9343
Socket Head Screw Key

014349343
86181: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9336
Socket Head Screw Key

014349336
86813: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9339
Socket Head Screw Key

014349339
86808: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9340
Socket Head Screw Key

014349340
86814: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9329
Socket Head Screw Key

014349329
86855: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9327
Flat Tip Screwdriver

014349327
3243-3V: RNCC: 3 | RNVC: 9
3243-3V: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9316
Flat Tip Screwdriver

014349316
SDF41: RNCC: 3 | RNVC: 9
SDF41: RNCC: 5 | RNVC: 2
443-1 1/4: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9315
Socket Head Screw Key

014349315
86510: RNCC: 3 | RNVC: 1
86510: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9324
Cross Tip Screwdriver

12 Aug 1996

5120-01-434-9308
Socket Head Screw Key

014349308
86209: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9303
Socket Head Screw Key

014349303
86208: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9304
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9307
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9302
Cross Tip Screwdriver

12 Aug 1996

5120-01-434-9310
Nutdriver

014349310
10: RNCC: 3 | RNVC: 9
10: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9305
Nutdriver

014349305
3716: RNCC: 3 | RNVC: 9
3716: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9313
Slip Joint Pliers

014349313
HL16P: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9297
Socket Head Screw Key

014349297
86815: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9296
Cross Tip Screwdriver

12 Aug 1996

5120-01-434-9298
Socket Head Screw Key

014349298
86205: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9300
Pliers

014349300
NN56PH: RNCC: 3 | RNVC: 9
NN56PH: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9299
C Clamp

014349299
78-431: RNCC: 3 | RNVC: 2
78-431: RNCC: 3 | RNVC: 9
78-431: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9286
C Clamp

014349286
78-604: RNCC: 3 | RNVC: 2
78-604: RNCC: 3 | RNVC: 9
78-604: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9287
Flat Tip Screwdriver

014349287
244-4: RNCC: 3 | RNVC: 9
244-4: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9294
C Clamp

014349294
78-636: RNCC: 3 | RNVC: 2
78-636: RNCC: 3 | RNVC: 9
78-636: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9290
Socket Head Screw Key

014349290
86811: RNCC: 3 | RNVC: 2

12 Aug 1996

5120-01-434-9291
C Clamp

014349291
78-406: RNCC: 3 | RNVC: 2
78-406: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9289
C Clamp

014349289
78-606: RNCC: 3 | RNVC: 2
78-606: RNCC: 3 | RNVC: 9
78-606: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9274
C Clamp

014349274
78-434: RNCC: 3 | RNVC: 2
78-434: RNCC: 3 | RNVC: 9
78-434: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9281
C Clamp

014349281
78-441: RNCC: 3 | RNVC: 2
78-441: RNCC: 3 | RNVC: 9
78-441: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9282
Socket Wrench

014349282
3712: RNCC: 3 | RNVC: 9
3712: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9278
C Clamp

014349278
78-338: RNCC: 3 | RNVC: 2
78-338: RNCC: 3 | RNVC: 9
78-338: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9267
Flat Tip Screwdriver

014349267
3143-4V: RNCC: 3 | RNVC: 9
3143-4V: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9277
C Clamp

014349277
78-411: RNCC: 3 | RNVC: 2
78-411: RNCC: 3 | RNVC: 9
78-411: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9276
C Clamp

014349276
78-436: RNCC: 3 | RNVC: 2
78-436: RNCC: 3 | RNVC: 9
78-436: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9266
Screw Extractor

014349266
B107.46: RNCC: 3 | RNVC: 1
70-966: RNCC: 5 | RNVC: 2
70-966: RNCC: 5 | RNVC: 9
70-966: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9259
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9275
C Clamp

014349275
78-608: RNCC: 3 | RNVC: 2
78-608: RNCC: 3 | RNVC: 9
78-608: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9265
C Clamp

014349265
78-442: RNCC: 3 | RNVC: 2
78-442: RNCC: 3 | RNVC: 9
78-442: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9270
C Clamp

014349270
78-403: RNCC: 3 | RNVC: 2
78-403: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9273
C Clamp

014349273
78-443: RNCC: 3 | RNVC: 2
78-443: RNCC: 3 | RNVC: 9
78-443: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9251
C Clamp

014349251
78-050: RNCC: 3 | RNVC: 2
78-050: RNCC: 3 | RNVC: 9
78-050: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9271
Screw Extractor Set

014349271
70-970: RNCC: 3 | RNVC: 2
70-970: RNCC: 3 | RNVC: 9
70-970: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9264
Screw Extractor

014349264
B107.46: RNCC: 3 | RNVC: 1
70-962: RNCC: 5 | RNVC: 2
70-962: RNCC: 5 | RNVC: 9
70-962: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9262
Cross Tip Screwdriver

12 Aug 1996

5120-01-434-9261
C Clamp

014349261
78-021: RNCC: 3 | RNVC: 2
78-021: RNCC: 3 | RNVC: 9
78-021: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9253
Hand Tube Flaring Tool

014349253
76-337: RNCC: 3 | RNVC: 2
76-337: RNCC: 3 | RNVC: 9
76-337: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9257
C Clamp

014349257
78-051: RNCC: 3 | RNVC: 2
78-051: RNCC: 3 | RNVC: 9
78-051: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9263
C Clamp

014349263
78-438: RNCC: 3 | RNVC: 2
78-438: RNCC: 3 | RNVC: 9
78-438: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9254
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9232
Pinch Bar

014349232
70-511: RNCC: 3 | RNVC: 1
70-511: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9244
C Clamp

014349244
78-010: RNCC: 3 | RNVC: 2
78-010: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9229
Pinch Bar

014349229
70-505: RNCC: 3 | RNVC: 2
70-505: RNCC: 3 | RNVC: 9
70-505: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9242
Pry Bar

014349242
70-519: RNCC: 3 | RNVC: 2
70-519: RNCC: 3 | RNVC: 9
70-519: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9235
Pinch Bar

014349235
70-503: RNCC: 3 | RNVC: 2
70-503: RNCC: 3 | RNVC: 9
70-503: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9250
C Clamp

014349250
78-030: RNCC: 3 | RNVC: 2
78-030: RNCC: 3 | RNVC: 9
78-030: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9243
Nutdriver

014349243
3714: RNCC: 3 | RNVC: 9
3714: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9237
Nutdriver

014349237
3708: RNCC: 3 | RNVC: 9
3708: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9241
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9238
Pinch Bar

014349238
70-509: RNCC: 3 | RNVC: 2
70-509: RNCC: 3 | RNVC: 9
70-509: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9247
Flat Tip Screwdriver

12 Aug 1996

5120-01-434-9227
C Clamp

014349227
78-408: RNCC: 3 | RNVC: 2
78-408: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9233
C Clamp

014349233
78-410: RNCC: 3 | RNVC: 2
78-410: RNCC: 3 | RNVC: 9
78-410: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9231
C Clamp

014349231
78-634: RNCC: 3 | RNVC: 2
78-634: RNCC: 3 | RNVC: 9
78-634: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9224
Pry Bar

014349224
70-539: RNCC: 3 | RNVC: 2
70-539: RNCC: 3 | RNVC: 9
70-539: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9234
Scratch Awl

014349234
73: RNCC: 3 | RNVC: 9
73: RNCC: 5 | RNVC: 2

12 Aug 1996

5120-01-434-9218
Pry Bar

014349218
70-531: RNCC: 3 | RNVC: 2
70-531: RNCC: 3 | RNVC: 9
70-531: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9236
C Clamp

014349236
78-413: RNCC: 3 | RNVC: 2
78-413: RNCC: 3 | RNVC: 9
78-413: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9208
C Clamp

014349208
78-334: RNCC: 3 | RNVC: 2
78-334: RNCC: 3 | RNVC: 9
78-334: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9210
Hand Hammer

014349210
69-655: RNCC: 3 | RNVC: 2
69-655: RNCC: 3 | RNVC: 9
69-655: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9212
C Clamp

014349212
78-433: RNCC: 3 | RNVC: 2
78-433: RNCC: 3 | RNVC: 9
78-433: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9221
Pry Bar

014349221
70-521: RNCC: 3 | RNVC: 2
70-521: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9206
Hand Hammer

014349206
69-649: RNCC: 3 | RNVC: 2
69-649: RNCC: 3 | RNVC: 9
69-649: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9211
Hand Hammer

014349211
69-653: RNCC: 3 | RNVC: 2
69-653: RNCC: 3 | RNVC: 9
69-653: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9216
C Clamp

014349216
78-336: RNCC: 3 | RNVC: 2
78-336: RNCC: 3 | RNVC: 9
78-336: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9209
C Clamp

014349209
78-432: RNCC: 3 | RNVC: 2
78-432: RNCC: 3 | RNVC: 9
78-432: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9219
C Clamp

014349219
78-440: RNCC: 3 | RNVC: 2
78-440: RNCC: 3 | RNVC: 9
78-440: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9197
C Clamp

014349197
78-020: RNCC: 3 | RNVC: 2
78-020: RNCC: 3 | RNVC: 9
78-020: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9187
Inserted Hammer Face Holder

014349187
69-069: RNCC: 3 | RNVC: 2
69-069: RNCC: 3 | RNVC: 9
69-069: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9201
C Clamp

014349201
78-031: RNCC: 3 | RNVC: 2
78-031: RNCC: 3 | RNVC: 9
78-031: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9196
Hand Hammer

014349196
69-643: RNCC: 3 | RNVC: 2
69-643: RNCC: 3 | RNVC: 9
69-643: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9185
Inserted Hammer Face Holder

014349185
69-031: RNCC: 3 | RNVC: 2
69-031: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9200
Hand Hammer

014349200
69-625: RNCC: 3 | RNVC: 2
69-625: RNCC: 3 | RNVC: 9
69-625: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9203
Screw Extractor

014349203
B107.46: RNCC: 3 | RNVC: 1
70-964: RNCC: 5 | RNVC: 2
70-964: RNCC: 5 | RNVC: 9
70-964: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9178
Inserted Hammer Face Holder

014349178
69-017: RNCC: 3 | RNVC: 1
69-017: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9184
Inserted Hammer Face Holder

014349184
69-027: RNCC: 3 | RNVC: 1
69-027: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9176
Drive Pin Punch Set

014349176
70-551: RNCC: 3 | RNVC: 2
70-551: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9162
Hand Hammer

014349162
69-651: RNCC: 3 | RNVC: 2
69-651: RNCC: 3 | RNVC: 9
69-651: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9156
Hand Hammer

014349156
69-645: RNCC: 3 | RNVC: 2
69-645: RNCC: 3 | RNVC: 9
69-645: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-9152
Inserted Hammer Face Holder

014349152
69-033: RNCC: 3 | RNVC: 2
69-033: RNCC: 3 | RNVC: 9
69-033: RNCC: 5 | RNVC: 9

12 Aug 1996

5120-01-434-7719
Box Wrench

014347719
1174: RNCC: 3 | RNVC: 2
1AMK4: RNCC: 5 | RNVC: 2

6 Aug 1996

5120-01-434-7717
Adjustable Wrench

6 Aug 1996

5120-01-434-7716
Adjustable Wrench

6 Aug 1996

NSN 5120-01-434-7713 014347713 WRENCH,BOX

5120-01-434-7713
Box Wrench

014347713
J1175: RNCC: 3 | RNVC: 2
1AMK6: RNCC: 5 | RNVC: 2
1175: RNCC: 5 | RNVC: 9

6 Aug 1996

5120-01-434-7712
Adjustable Wrench

6 Aug 1996

5120-01-434-7707
Socket Wrench Extension

6 Aug 1996

5120-01-434-7710
Box Wrench

014347710
1176: RNCC: 3 | RNVC: 2
1AMK8: RNCC: 5 | RNVC: 2

6 Aug 1996

5120-01-434-7706
Socket Wrench Handle

6 Aug 1996

5120-01-434-7701
Socket Wrench

014347701
488 5969-801: RNCC: 3 | RNVC: 2

6 Aug 1996

5120-01-434-7508
Soda Hopper

014347508
599830-6000-47: RNCC: 3 | RNVC: 2
6000-47: RNCC: 5 | RNVC: 2
FJH5915-2 TOOL NO. 7: RNCC: 5 | RNVC: 2

6 Aug 1996

5120-01-434-7510
Gear Holder Adapter Set

014347510
C-4658: RNCC: 3 | RNVC: 9

6 Aug 1996

5120-01-434-5791
Pilot

014345791
17G110836-45: RNCC: 3 | RNVC: 2

1 Aug 1996

5120-01-434-5795
Face Spanner Wrench Socket

014345795
AT-5134-3: RNCC: 3 | RNVC: 2

1 Aug 1996

5120-01-434-5794
Face Spanner Wrench Socket

014345794
AT-5134-1: RNCC: 3 | RNVC: 2

1 Aug 1996

5120-01-434-5066
Socket Head Screw Key

014345066
88305-0: RNCC: 3 | RNVC: 2

31 Jul 1996

5120-01-434-5065
Open End Wrench

014345065
88330-0: RNCC: 3 | RNVC: 2

31 Jul 1996

5120-01-434-4688
Seal Remover

014344688
C-3981B: RNCC: 3 | RNVC: 2

30 Jul 1996

5120-01-434-4687
Socket Wrench

014344687
69847-0: RNCC: 3 | RNVC: 2

30 Jul 1996

5120-01-434-4689
Socket Wrench

014344689
88692-0: RNCC: 3 | RNVC: 2

30 Jul 1996

5120-01-434-4691
Socket Wrench

014344691
69848-0: RNCC: 3 | RNVC: 2

30 Jul 1996

5120-01-434-4693
Pilot

014344693
17G110836-43: RNCC: 3 | RNVC: 2

30 Jul 1996

5120-01-434-4694
Pilot

014344694
17G110836-39: RNCC: 3 | RNVC: 2

30 Jul 1996

5120-01-434-4695
Pilot

014344695
17G110836-41: RNCC: 3 | RNVC: 2

30 Jul 1996

5120-01-434-4690
Socket Wrench

014344690
88690-0: RNCC: 3 | RNVC: 2

30 Jul 1996

5120-01-434-4192
Combination Box And Open End Wrench Set

014344192
92386: RNCC: 3 | RNVC: 2
92386: RNCC: 3 | RNVC: 9

29 Jul 1996

5120-01-434-4188
Combination Box And Open End Wrench Set

014344188
92385: RNCC: 3 | RNVC: 2
92385: RNCC: 3 | RNVC: 9

29 Jul 1996

5120-01-434-4184
Combination Box And Open End Wrench Set

014344184
92373: RNCC: 3 | RNVC: 2
92373: RNCC: 3 | RNVC: 9

29 Jul 1996

5120-01-434-4187
Combination Box And Open End Wrench Set

014344187
92374: RNCC: 3 | RNVC: 2
92374: RNCC: 3 | RNVC: 9

29 Jul 1996

5120-01-434-4191
Combination Box And Open End Wrench Set

014344191
92377: RNCC: 3 | RNVC: 2
92377: RNCC: 3 | RNVC: 9

29 Jul 1996

5120-01-434-4186
Combination Box And Open End Wrench Set

014344186
92376: RNCC: 3 | RNVC: 2
92376: RNCC: 3 | RNVC: 9

29 Jul 1996

5120-01-434-4181
Torque Wrench Adapter

014344181
PWA80488-1: RNCC: 3 | RNVC: 2

29 Jul 1996

5120-01-434-4180
Mechanical Puller Jaw

014344180
PWA80428-3: RNCC: 3 | RNVC: 2

29 Jul 1996

5120-01-434-4182
Combination Box And Open End Wrench Set

014344182
92387: RNCC: 3 | RNVC: 2
92387: RNCC: 3 | RNVC: 9

29 Jul 1996

5120-01-434-4055
Hand Hammer

29 Jul 1996

5120-01-434-3130
Bearing Cup Remover Receiver

014343130
L-4518-1: RNCC: 3 | RNVC: 2

25 Jul 1996

5120-01-434-3120
Bearing Cup Installer Adapter

014343120
L-4429-3: RNCC: 3 | RNVC: 9

25 Jul 1996

5120-01-434-3119
Clutch Installer

014343119
L-4440: RNCC: 3 | RNVC: 2

25 Jul 1996

5120-01-434-3118
Bridge Dowel

014343118
9U-5096: RNCC: 3 | RNVC: 2
8T-2669: RNCC: 5 | RNVC: 9

25 Jul 1996

5120-01-434-3112
Gear Holder

014343112
L-4434: RNCC: 3 | RNVC: 9

25 Jul 1996

5120-01-434-3111
Bearing Cup Remover

014343111
L-4517: RNCC: 3 | RNVC: 9

25 Jul 1996

5120-01-434-2693
Tube Puller

014342693
JSP-750-18: RNCC: 3 | RNVC: 2
JSP-750-18: RNCC: 5 | RNVC: 9

24 Jul 1996

5120-01-434-2472
Sizing Rotary Tool

24 Jul 1996

5120-01-434-2273
Mechanical Puller Adapter

014342273
C-4996: RNCC: 3 | RNVC: 9

24 Jul 1996

5120-01-434-2251
Bearing And Bushing Remover

014342251
L-4406: RNCC: 3 | RNVC: 2

24 Jul 1996

5120-01-434-2265
Seal Inserter

014342265
C-4193A: RNCC: 3 | RNVC: 9

24 Jul 1996

5120-01-434-2271
Bearing And Bushing Inserter

014342271
C-4637: RNCC: 3 | RNVC: 2

24 Jul 1996

5120-01-434-2272
Bearing And Bushing Inserter

014342272
L-4408: RNCC: 3 | RNVC: 2

24 Jul 1996

5120-01-434-2274
Spanner Wrench

24 Jul 1996

5120-01-434-2268
Bearing And Bushing Inserter

014342268
L-4410: RNCC: 3 | RNVC: 2

24 Jul 1996

5120-01-434-2269
Bearing And Bushing Inserter

014342269
L-4411: RNCC: 3 | RNVC: 9

24 Jul 1996

5120-01-434-2270
Seal Inserter

014342270
L-4520: RNCC: 3 | RNVC: 2

24 Jul 1996

5120-01-434-2267
Mechanical Puller

014342267
L-4407A: RNCC: 3 | RNVC: 2

24 Jul 1996

5120-01-434-2266
Mechanical Puller Adapter

014342266
L-4437: RNCC: 3 | RNVC: 9

24 Jul 1996

5120-01-434-1991
Cylinder Liner Remover

014341991
1U-7621: RNCC: 3 | RNVC: 2

23 Jul 1996

5120-01-434-1251
Valve Spring Compressor

014341251
8T-3108: RNCC: 3 | RNVC: 2

22 Jul 1996

5120-01-434-0361
Terminal Crimping Tool Contact Positioner

014340361
KJ1304-7: RNCC: 3 | RNVC: 2

17 Jul 1996

5120-01-434-0360
Hand Terminal Crimping Tool

17 Jul 1996

5120-01-433-9429
Compressor Removal Kit

014339429
43N3-102-2: RNCC: 3 | RNVC: 2

15 Jul 1996

5120-01-433-9293
Seal Inserter

014339293
A02E5842-8: RNCC: 3 | RNVC: 2

15 Jul 1996

5120-01-433-6452
Hoist Drum Sk Hd Cap Screw Removal Tool

014336452
4D07336: RNCC: 3 | RNVC: 2

6 Jul 1996

5120-01-433-6181
Bearing And Bushing Inserter

014336181
423G5844-1: RNCC: 3 | RNVC: 2

4 Jul 1996

5120-01-433-0314
Seal Inserter

014330314
423G5842-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5120-01-433-0316
Bearing And Bushing Inserter And Remover

014330316
423G0006-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5120-01-432-9368

18 Jun 1996

5120-01-432-9021
Lathe Chuck Wrench

014329021
2430 0093 WASHINGTON: RNCC: 3 | RNVC: 9

17 Jun 1996

5120-01-432-7886
Integrated Circuit Remover

13 Jun 1996

5120-01-432-7908
Valve Insert Remover

014327908
092-0315-98: RNCC: 3 | RNVC: 2

13 Jun 1996

5120-01-432-6719
Socket Wrench Socket

014326719
753B171H04: RNCC: 3 | RNVC: 2
753B171H04: RNCC: 5 | RNVC: 2

12 Jun 1996

5120-01-432-6722
Socket Wrench Socket

12 Jun 1996

5120-01-432-5179
Screwdriver Bit Set And Handle

7 Jun 1996

5120-01-432-5176
Box Wrench

7 Jun 1996

5120-01-432-4836
Mechanical Puller

014324836
376-76086-000: RNCC: 3 | RNVC: 2

6 Jun 1996

5120-01-432-4843

6 Jun 1996

5120-01-432-4837
Face Spanner Wrench Socket

014324837
076-75282: RNCC: 3 | RNVC: 2
076-75282-000: RNCC: 5 | RNVC: 2

6 Jun 1996

5120-01-432-4523
Bearing And Bushing Inserter

014324523
A02E5847-1: RNCC: 3 | RNVC: 2

6 Jun 1996

5120-01-432-3777
Pin Remover

014323777
2557331-11: RNCC: 3 | RNVC: 2

4 Jun 1996

5120-01-432-3775
Pin Remover

014323775
2557331-12: RNCC: 3 | RNVC: 2

4 Jun 1996

5120-01-432-3776
Pin Inserter

014323776
2557331-10: RNCC: 3 | RNVC: 2

4 Jun 1996

5120-01-432-3298
Hammer Handle

014323298
880: RNCC: 3 | RNVC: 2

3 Jun 1996

5120-01-432-3297
Hammer Handle

014323297
881: RNCC: 3 | RNVC: 2

3 Jun 1996

5120-01-432-3295
Mattock-Pick Handle

014323295
3MD46(NUPLA): RNCC: 3 | RNVC: 2
2027400: RNCC: 3 | RNVC: 2
884: RNCC: 3 | RNVC: 2
55551: RNCC: 3 | RNVC: 2
55551: RNCC: 5 | RNVC: 9

3 Jun 1996

5120-01-432-3285
Spanner Wrench

014323285
064-47793-000: RNCC: 3 | RNVC: 2

3 Jun 1996

5120-01-432-3152
Valve Seat Ring Wrench

014323152
972-SEAT TOOL: RNCC: 3 | RNVC: 2

3 Jun 1996

5120-01-432-3134

3 Jun 1996

5120-01-432-3142
Shingle Ripper

014323142
640: RNCC: 3 | RNVC: 2
00018371006408: RNCC: 5 | RNVC: 2

3 Jun 1996

5120-01-432-3143
Molding Tool

014323143
3471: RNCC: 3 | RNVC: 2
00018371034715: RNCC: 5 | RNVC: 2

3 Jun 1996

5120-01-432-3024
Mechanical Puller

014323024
3886371: RNCC: 3 | RNVC: 2

2 Jun 1996

5120-01-432-2810
Packing Installation Tool

014322810
2557237-4: RNCC: 3 | RNVC: 2

31 May 1996

5120-01-432-2799
Packing Installation Tool

014322799
2557237-8: RNCC: 3 | RNVC: 2

31 May 1996

5120-01-432-2802
Packing Installation Tool

014322802
2557237-1: RNCC: 3 | RNVC: 2

31 May 1996

5120-01-432-2612
Digging Bar

014322612
152: RNCC: 3 | RNVC: 2
00018371001526: RNCC: 5 | RNVC: 2

31 May 1996

5120-01-432-2613
Hand Hammer

014322613
399: RNCC: 3 | RNVC: 2
00018371003995: RNCC: 5 | RNVC: 2

31 May 1996

5120-01-432-2202
Screwdriver Bit Extension

014322202
BH23597: RNCC: 3 | RNVC: 2

30 May 1996

5120-01-432-1638
Socket Head Screw Key

014321638
58285: RNCC: 3 | RNVC: 2
58285: RNCC: 3 | RNVC: 9
58285: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1888
Socket Wrench Adapter

014321888
291745-1: RNCC: 3 | RNVC: 2

29 May 1996

5120-01-432-1632
Socket Head Screw Key

014321632
58284: RNCC: 3 | RNVC: 2
58284: RNCC: 3 | RNVC: 9
58284: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1601
Socket Head Screw Key

014321601
57321: RNCC: 3 | RNVC: 2
57321: RNCC: 3 | RNVC: 9
57321: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1663
Ratchet Wrench

014321663
RBO2428: RNCC: 3 | RNVC: 9

28 May 1996

5120-01-432-1658
Ratchet Wrench

014321658
RBO1618: RNCC: 3 | RNVC: 9

28 May 1996

5120-01-432-1656
Ratchet Wrench

014321656
RBO1214: RNCC: 3 | RNVC: 9

28 May 1996

5120-01-432-1660
Ratchet Wrench

014321660
RBO2024: RNCC: 3 | RNVC: 9

28 May 1996

5120-01-432-1661
Ratchet Wrench

014321661
RBO2022: RNCC: 3 | RNVC: 9

28 May 1996

5120-01-432-1659
Ratchet Wrench

014321659
RBO2226: RNCC: 3 | RNVC: 9

28 May 1996

5120-01-432-1651
Socket Head Screw Key

014321651
57504: RNCC: 3 | RNVC: 2
57504: RNCC: 3 | RNVC: 9
57504: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1653
Socket Head Screw Key

014321653
57510: RNCC: 3 | RNVC: 2
57510: RNCC: 3 | RNVC: 9
57510: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1652
Socket Head Screw Key

014321652
57506: RNCC: 3 | RNVC: 2
57506: RNCC: 3 | RNVC: 9
57506: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1655
Socket Head Screw Key

014321655
57508: RNCC: 3 | RNVC: 2
57508: RNCC: 3 | RNVC: 9
57508: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1646
Socket Head Screw Key Set

014321646
56382: RNCC: 3 | RNVC: 1

28 May 1996

5120-01-432-1641
Socket Head Screw Key Set

014321641
56384: RNCC: 3 | RNVC: 2
56384: RNCC: 3 | RNVC: 9
56384: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1634
Socket Head Screw Key

014321634
58287: RNCC: 3 | RNVC: 2
58287: RNCC: 3 | RNVC: 9
58287: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1631
Socket Head Screw Key

014321631
58283: RNCC: 3 | RNVC: 2
58283: RNCC: 3 | RNVC: 9
58283: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1636
Socket Head Screw Key

014321636
57502: RNCC: 3 | RNVC: 2
57502: RNCC: 3 | RNVC: 9
57502: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1639
Socket Head Screw Key Set

014321639
56257: RNCC: 3 | RNVC: 2
56257: RNCC: 3 | RNVC: 9
56257: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1630
Socket Head Screw Key

014321630
57863: RNCC: 3 | RNVC: 2
57863: RNCC: 3 | RNVC: 9
57863: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1613
Socket Head Screw Key

014321613
57325: RNCC: 3 | RNVC: 2
57325: RNCC: 3 | RNVC: 9
57325: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1611
Socket Head Screw Key

014321611
58275: RNCC: 3 | RNVC: 2
58275: RNCC: 3 | RNVC: 9
58275: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1629
Socket Head Screw Key Set

014321629
56261: RNCC: 3 | RNVC: 2
56261: RNCC: 3 | RNVC: 9
56261: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1614
Socket Head Screw Key

014321614
58276: RNCC: 3 | RNVC: 2
58276: RNCC: 3 | RNVC: 9
58276: RNCC: 5 | RNVC: 9

28 May 1996

5120-01-432-1617
Socket Head Screw Key

014321617
58277: RNCC: 3 | RNVC: 2
58277: RNCC: 3 | RNVC: 9
58277: RNCC: 5 | RNVC: 9

28 May 1996

Load More Results