What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

What is a Flexible Carbon Scraper?

A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.

What is a Bearing Scraper?

A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.

What is an Electricians' Scissors?

An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.

What is a Crosscut Hand Saw?

A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.

What is a Miter Box Saw?

A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.

What is a Metal Cutting Hand Saw?

A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.

What is a Dimpling Punch?

A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.

A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.

A Hand Rasp (RASP,HAND) is excludes FILE, HAND.

What is a Hand Hacksaw Blade?

A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.

What is a Single Bit Ax?

A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.

What is a Turning Chisel?

A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.

What is a Firmer Gouge?

A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.

What is a Brick Chisel?

A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.

What is a Hand Cold Chisel?

A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.

What is a Hand Cape Chisel?

A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.

What is a Hand Diamond Point Chisel?

A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.

What is a Hand Half Round Nose Chisel?

A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.

What is a Hand Rivet Buster Chisel?

A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.

What is a Bent Trimmers Shears?

A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.

What is a Straight Trimmers Shears?

A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.

What is an Embroidery Scissors?

An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.

What is a Scraping Knife?

A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.

What is a Thread Restorer File?

A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.

What is a Hand File Set?

A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.

What is a Hand Leather Stamping Die Set?

A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.

Hand Tools, Edged, Nonpowered - United States (US)

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United States (US) - NCB is 00 to 09

Page 34 of 35

NSN Format for Hand Tools, Edged, Nonpowered
Codified by United States

51	10	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

FSC 5110 Hand Tools, Edged, Nonpowered - United States (US)

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 864 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 10 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 12 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 12 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Bolt Cutter? 42 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Pipe Cutter? 42 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Hand Metal Cutting Shears? 143 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 11 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
Punch,Cutting,Double Bow 27 Items
Punch,Cutting,Single Bow 22 Items
What is an Exposed Blade Tube Deburring Tool? 55 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 31 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Pocket Knife? 183 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Pliers? 111 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Craftsman's Knife? 186 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 1028 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Dimpling Die? 103 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
Reamer,Cylinder Ridge 19 Items
What is a Glass Cutter? 13 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is an End Cutting Nippers? 39 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 17 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
What is an Edge Cutting Trimming Tool? 12 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 259 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Metal Stamping Die? 104 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Flexible Carbon Scraper? 10 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Bearing Scraper? 28 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 11 Items
What is an Electricians' Scissors? 16 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Crosscut Hand Saw? 46 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Miter Box Saw? 10 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 85 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
Saw,Compass 11 Items
What is a Dimpling Punch? 72 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 27 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 24 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Hand Hacksaw Blade? 133 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Single Bit Ax? 29 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Turning Chisel? 12 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 11 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 18 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 212 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 16 Items
What is a Hand Cape Chisel? 47 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 38 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 21 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Rivet Buster Chisel? 12 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Bent Trimmers Shears? 18 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 23 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is an Embroidery Scissors? 11 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Scraping Knife? 99 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 37 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 88 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 11 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 37 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 12 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Hand Metal Cutting Punch And Die Set? 12 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Knockout Punch And Die? 176 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Paper Cutter? 15 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Tube Cutter? 101 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 128 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Hand Metal Cutting Punch And Die? 10 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 252 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Hand Operated Cable Cutter? 112 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 51 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 31 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Craftsman's Knife Set? 11 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 25 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 39 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 29 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 14 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
Jaws,Bolt Cutter 17 Items
What is a Tube Cutter Cutting Wheel? 25 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a File Handle? 70 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
What is a Hand Optical Fiber Stripper? 34 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 30 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
What is a Knife Blade? 131 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Cable Stripper Blade? 16 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Wire Stripper Blade Set? 48 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 27 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Operated Cable Cutter Blade? 12 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 169 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
Blade,Scraper 65 Items
What is a Scraping Knife Set? 15 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 34 of 35

5110-00-095-2702
Hand Reamer

000952702
PWA1040: RNCC: 3 | RNVC: 2

1 Jan 1960

5110-00-095-2890
Reamer

000952890
PWA2766-9: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-903-2547
Hand Reamer

009032547
X2-0-35-2: RNCC: 3 | RNVC: 2

10 Feb 1967

5110-01-071-3661
Knife Blade

010713661
611: RNCC: 3 | RNVC: 9

6 Feb 1979

5110-01-077-8865
Dimpling Die

010778865
ZT1878-1-4: RNCC: 3 | RNVC: 2

1 Jun 1979

5110-00-293-3380
Single Bit Ax Handle

002933380
70-005: RNCC: 3 | RNVC: 2
USDA FOREST SERVICE 5100-9: RNCC: 5 | RNVC: 9
NFES 1812: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-079-2835
Dimpling Punch

010792835
ZT1867-1/4-28: RNCC: 3 | RNVC: 2

30 Jun 1979

5110-00-540-5789
Single Bow Cutting Punch

005405789
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY6CLBST2SZ20: RNCC: 5 | RNVC: 1
GGG-P-831: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-255-6085
Turning Gouge

002556085
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-224-8735
Hand Reamer

002248735
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 3/32 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-490-3880
Die-Dimpling Female

004903880
40B3907-13: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-049-1575
Hand Bull Point Chisel

010491575
01 378 H7: RNCC: 3 | RNVC: 2

12 Oct 1977

5110-00-227-5033
Paring Gouge

002275033
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL3STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-596-1093
Craftsman's Knife

005961093
GGG-K-481: RNCC: 4 | RNVC: 1
GGG-K-481 TY6: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-228-3189
Hand Hacksaw Blade

002283189
GGG-B-451: RNCC: 4 | RNVC: 1
GGG-B-451 TY1GRBCL2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-222-8972
Hand Reamer

002228972
A-A-2936: RNCC: 4 | RNVC: 1
A-A-2936 CL2: RNCC: 5 | RNVC: 1
GGG-R-180 TY7CL3GRB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-507-2512
Dimpling Punch

005072512
39D2451-1: RNCC: 3 | RNVC: 2
12-1-23: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-596-4358
Hand Reamer

005964358
53C20381-7450: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-596-4363
Hand Reamer

005964363
53C20381-11240: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-596-4367
Hand Reamer

005964367
53C20381-3100: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-01-031-2058
Wire Rope Cutter Cutting Punch

010312058
10005: RNCC: 3 | RNVC: 2
10005: RNCC: 5 | RNVC: 9

20 Nov 1976

5110-00-795-0040
Hand Reamer

007950040
7950040: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-00-795-0248
Hand Reamer

007950248
7950248: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-047-0207
Hand Reamer

010470207
TA5061: RNCC: 3 | RNVC: 2

27 Aug 1977

5110-00-234-6336
Jeweler's Saw Blade

002346336
5110-00-234-6336: RNCC: 3 | RNVC: 2
GGG-B-471: RNCC: 4 | RNVC: 1
GGG-B-471 TY2: RNCC: 5 | RNVC: 1
49.411: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-01-019-7932
Dimpling Die

010197932
MM-210-3-L5/8: RNCC: 3 | RNVC: 2

19 Apr 1976

5110-00-221-1245
Combination Plane

002211245
GGG-P-436: RNCC: 4 | RNVC: 1
GGG-P-436 TY4: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-555-0790
Hand Rasp

005550790
5110-00-555-0790: RNCC: 3 | RNVC: 2
48962: RNCC: 5 | RNVC: 2
A-A-2328: RNCC: 5 | RNVC: 9
GGG-F-325 TY26: RNCC: 5 | RNVC: 9
48962: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-039-9488
Hand File

010399488
36476: RNCC: 3 | RNVC: 2
GGG-F-331 TY6: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
36476: RNCC: 5 | RNVC: 9

28 Apr 1977

5110-01-039-9486
Hand File

010399486
A-A-2430: RNCC: 4 | RNVC: 1
36723: RNCC: 5 | RNVC: 2
36723: RNCC: 5 | RNVC: 9

28 Apr 1977

5110-00-253-8668
Hand Reamer

002538668
A-A-2936: RNCC: 4 | RNVC: 1
A-A-2936 CL2: RNCC: 5 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY7CL3STA: RNCC: 5 | RNVC: 9
TY242: RNCC: 5 | RNVC: 9
242: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-257-5270
Drilling Post And Ratchet Drill

002575270
101: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-540-5993
Hand Reamer

005405993
256557-18: RNCC: 3 | RNVC: 2
256557-18: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-449-7316
Gasket Cutting Punch

004497316
743: RNCC: 3 | RNVC: 2
FRS PGH8-4: RNCC: 3 | RNVC: 2
PGH8-4: RNCC: 5 | RNVC: 9
HP12: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-965-0974
Diagonal Cutting Pliers

009650974
B107.500: RNCC: 3 | RNVC: 1
B107.11 TY1CL1STA: RNCC: 5 | RNVC: 1
B107.11: RNCC: 5 | RNVC: 1
84CG: RNCC: 5 | RNVC: 2
A-A-2330: RNCC: 5 | RNVC: 9
GGG-P-468: RNCC: 5 | RNVC: 9
GGG-P-468 TY1CL1: RNCC: 5 | RNVC: 9
84CG: RNCC: 5 | RNVC: 9

1 Jan 1960

5110-00-015-8342
Die Assembly

000158342
ZT3856-1-8: RNCC: 3 | RNVC: 2

1 Jan 1961

5110-00-756-1045
Dimpling Die

007561045
4-G200F-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-293-0446
Hand Bushing Splitting Tool

002930446
GA1: RNCC: 3 | RNVC: 2
169: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-1957
Ratchet Bit Brace

002931957
GGG-B-671: RNCC: 4 | RNVC: 1
GGG-B-671 TY1CL2STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-293-3027
Hand Reamer

002933027
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
128RB: RNCC: 5 | RNVC: 9
761-1280-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-294-4459
Hand Reamer

002944459
53C20381-6229: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-087-9891
Blade

010879891
35F2462: RNCC: 3 | RNVC: 2

3 Jan 1980

5110-00-677-5707
Fastener Collar Cutter

006775707
105-12: RNCC: 3 | RNVC: 2
105-10: RNCC: 5 | RNVC: 2
105-12: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-123-1141
Knife Blade

011231141
X8: RNCC: 3 | RNVC: 9
8: RNCC: 5 | RNVC: 9

6 Dec 1981

5110-01-079-2837
Dimpling Punch

010792837
ZT1791-1: RNCC: 3 | RNVC: 2

30 Jun 1979

5110-00-398-2680
Hand Reamer

003982680
PWA2017-3: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-156-0130
Hand File

001560130
A-A-2315: RNCC: 4 | RNVC: 1
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY12CL1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-156-0248
Hand File

1 Jan 1963

5110-01-048-5294
Tube Cutter Cutting Wheel

010485294
33185: RNCC: 3 | RNVC: 2
33185: RNCC: 5 | RNVC: 2
07049802: RNCC: 5 | RNVC: 2
E-3469: RNCC: 5 | RNVC: 9

27 Sep 1977

5110-00-239-7765
Hand File

002397765
A-A-2441: RNCC: 4 | RNVC: 1
41618: RNCC: 5 | RNVC: 2
41618: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
41618: RNCC: 5 | RNVC: 9
GGG-F-331 TY17: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-937-7630
Injector Nut Carbon Remover

009377630
J-9418-1: RNCC: 3 | RNVC: 2

30 Jan 1967

5110-00-585-8425
Woodworking Butt Chisel

005858425
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 3 | RNVC: 1
102BC: RNCC: 5 | RNVC: 2
16-904: RNCC: 5 | RNVC: 2
16-904: RNCC: 5 | RNVC: 2
1042: RNCC: 5 | RNVC: 2
GGG-C-311: RNCC: 5 | RNVC: 9
B107.44: RNCC: 5 | RNVC: 9
B107.44 TY2: RNCC: 5 | RNVC: 9
GGG-C-311 TY1CL3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-537-2000
Craftsman's Knife

005372000
A-A-50906: RNCC: 4 | RNVC: 1
12: RNCC: 5 | RNVC: 2
55700: RNCC: 5 | RNVC: 2
GG-K-508 TY1STB: RNCC: 5 | RNVC: 9
GG-K-00508: RNCC: 5 | RNVC: 9
GG-K-508: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-097-9494
Hand Reamer

000979494
901354-2: RNCC: 3 | RNVC: 2
4S90148-101A: RNCC: 5 | RNVC: 2

24 May 1968

5110-00-892-5944
Hand File

008925944
A-A-2319: RNCC: 4 | RNVC: 1
02150: RNCC: 5 | RNVC: 2
02150: RNCC: 5 | RNVC: 9
GGG-F-325 TY16CL2: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-00-501-2216
Hand Reamer

005012216
5012216: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-371-9626
Pressure Chamber Scraper

003719626
A4955-50: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-520-9718
Hand Reamer

005209718
8708142: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-239-7752
Hand File

002397752
GGG-F-331: RNCC: 4 | RNVC: 1
GGG-F-331 TY16: RNCC: 5 | RNVC: 1
41486: RNCC: 5 | RNVC: 2
MS15641-4: RNCC: 5 | RNVC: 9
41486: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-860-4728
Hand Operated Cable Cutter

008604728
8690FS: RNCC: 3 | RNVC: 2
88000: RNCC: 5 | RNVC: 2

6 Oct 1967

5110-00-239-7748
Hand File

002397748
5110-00-239-7748: RNCC: 3 | RNVC: 2
A-A-2440: RNCC: 5 | RNVC: 1
41454: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
GGG-F-331 TY16: RNCC: 5 | RNVC: 9
41454: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-203-4645
Hand File

002034645
5110-00-203-4645: RNCC: 3 | RNVC: 1
85706: RNCC: 3 | RNVC: 1
TEAX1FK: RNCC: 5 | RNVC: 2
81AC005: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY13CL2STC: RNCC: 5 | RNVC: 9
A-A-2316: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-350-3635
Hand Wire Stripper

003503635
103S: RNCC: 3 | RNVC: 2

7 Jan 1972

5110-00-596-1151
Hand Reamer Set

005961151
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
A-A-2930: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL2GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-1147
Hand Reamer

005961147
50031TYPEA2GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-203-4730
Hand File

002034730
A-A-2320: RNCC: 4 | RNVC: 1
12857: RNCC: 5 | RNVC: 2
12857: RNCC: 5 | RNVC: 9
GGG-F-325 TY17STC: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-805-1232
Riffler

008051232
A-A-2464: RNCC: 4 | RNVC: 1
MS15677-3: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
GGG-F-331 TY20CL10: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-00-004-3990
Knockout Punch And Die

000043990
730-11-16: RNCC: 3 | RNVC: 2

7 Jun 1972

5110-00-193-4992
Firmer Gouge

001934992
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL1STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-188-6352
Hand Reamer

001886352
30040: RNCC: 3 | RNVC: 9
30040: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-555-0786
Hand File

005550786
A-A-2307: RNCC: 4 | RNVC: 1
00161: RNCC: 5 | RNVC: 2
GGG-F-325 TY1CL2: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
00161: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-190-5810
Hand Oil Groove Chisel

001905810
S5455: RNCC: 3 | RNVC: 1
F165-858-1509: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-540-1693
Crosscut Hand Saw

005401693
S-1: RNCC: 3 | RNVC: 2
S-1: RNCC: 5 | RNVC: 9
A-A-2480: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-541-0596
Firmer Gouge

005410596
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL1STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-357-6844
Hand Reamer

003576844
GH437: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-234-6524
Hand File

002346524
A-A-2321: RNCC: 4 | RNVC: 1
A-A-2321 TY1: RNCC: 5 | RNVC: 1
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY18CL1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-357-6857
Hand Reamer Set

003576857
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY8CL2GRA: RNCC: 5 | RNVC: 9
41R2313-50: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-364-2854
Wire Stripper

003642854
45-098: RNCC: 3 | RNVC: 2
79DH416-00: RNCC: 5 | RNVC: 2

18 Feb 1974

5110-00-937-7629
Injector Nut Spray Tip Carbon Remover

009377629
J-9418-5: RNCC: 3 | RNVC: 2

30 Jan 1967

5110-00-690-8018
Die Set Curve Face

006908018
RSAX: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-449-3743
Channel Chisel

004493743
201-3002: RNCC: 3 | RNVC: 2
CC-1: RNCC: 5 | RNVC: 9
CC-1: RNCC: C | RNVC: 1

1 Jan 1963

5110-00-316-4781
Cylinder Reseating Tool

003164781
3273295: RNCC: 3 | RNVC: 2
3273295: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-316-4783
Air Reseating Tool

003164783
3273297: RNCC: 3 | RNVC: 2
3273297: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-316-4784
Air Reseating Tool

003164784
3273298: RNCC: 3 | RNVC: 2
3273298: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-316-4773
Fuel Reseating Tool

003164773
3275819: RNCC: 3 | RNVC: 2
3276421: RNCC: 3 | RNVC: 2
3228393: RNCC: 3 | RNVC: 2
3228393: RNCC: 5 | RNVC: 9
3275819: RNCC: 5 | RNVC: 9
3276421: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-679-4678
Knife Blade

006794678
X24: RNCC: 3 | RNVC: 9
GGG-K-00450: RNCC: 4 | RNVC: 1
24: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-3392
Single Bit Ax Handle

002933392
NNH0093: RNCC: 4 | RNVC: 1

1 Jan 1963

5110-00-293-2507
Hand Hacksaw Blade

002932507
GGG-B-451: RNCC: 4 | RNVC: 1

1 Jan 1963

5110-01-077-8871
Dimpling Die

010778871
ZT1752-5-32: RNCC: 3 | RNVC: 2

1 Jun 1979

5110-00-478-6494
Rivet Peening Punch

004786494
W1365-1: RNCC: 3 | RNVC: 9
WI365-1: RNCC: 5 | RNVC: 2

15 Jan 1971

5110-00-918-3027
Plate Assem Adapter

009183027
4067-193: RNCC: 3 | RNVC: 9
4067-185: RNCC: 5 | RNVC: 9

1 Jan 1960

5110-00-595-9296
Hand Reamer

005959296
B94.2: RNCC: 3 | RNVC: 1
761-0900-000: RNCC: 3 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
90RB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-0877
Coping Saw

005960877
GGG-F-671: RNCC: 4 | RNVC: 1
GGG-F-671 TY7STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-596-1050
Hand Boilermaker's Chisel

005961050
DE51-S5101-443664-1513: RNCC: 3 | RNVC: 2
F165-858-1513: RNCC: 5 | RNVC: 9
1513: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-1145
Hand Reamer

005961145
50031TYPEA2GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-596-1152
Hand Reamer Set

005961152
A-A-2937: RNCC: 4 | RNVC: 1
GGG-R-180 TY3CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-489-8135
Hand Operated Hawser Cutter

004898135
11-340: RNCC: 3 | RNVC: 9
G10780: RNCC: 5 | RNVC: 9
41-610: RNCC: 5 | RNVC: 9

17 Sep 1969

5110-00-293-3039
Hand Reamer

002933039
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-1066
Hand Operated Wire Rope Cutter

002931066
5110-00-293-1066: RNCC: 3 | RNVC: 2
131: RNCC: 5 | RNVC: 2
2: RNCC: 5 | RNVC: 9
GGG-C-800 TY3SZ3: RNCC: 5 | RNVC: 9
A-A-30275: RNCC: 5 | RNVC: 9
GGG-C-800: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-2477
Adz Handle

002932477
5110-00-293-2477: RNCC: 3 | RNVC: 2
NN-H-0093 GRB: RNCC: 5 | RNVC: 9
NN-H-0093: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-784-7948
Tube Deburring Tool Stem

007847948
D9849-13-21: RNCC: 3 | RNVC: 2

14 Apr 1972

5110-00-329-6105
Impeller Dri Reamer

003296105
923238: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-220-9549
Dimpling Punch

002209549
48C19983-10: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-316-9196
Hand Reamer

003169196
C161-71-4: RNCC: 3 | RNVC: 2
5344392: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-690-8573
Reamer Hand

006908573
7065758: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-708-3505
Fly Cutter

007083505
7083505: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-223-3765
Scissors

002233765
722699-223: RNCC: 3 | RNVC: 2
763-1-2: RNCC: 5 | RNVC: 2

7 Oct 1970

5110-00-223-6267
Hand Bench Shears

002236267
B107.16: RNCC: 3 | RNVC: 1
GGG-S-291 TY1CL2: RNCC: 5 | RNVC: 9
GGG-S-291: RNCC: 5 | RNVC: 9
MS16508: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-323-4732
Hand File

003234732
5110-00-323-4732: RNCC: 3 | RNVC: 2
01964: RNCC: 5 | RNVC: 2
A-A-2319: RNCC: 5 | RNVC: 9
GGG-F-325 TY16CL2: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
01964: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-222-1104
Turning Gouge

002221104
5110-00-222-1104: RNCC: 3 | RNVC: 1
GGG-C-311 TY2CL2: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-560-2452
Caulking Chisel

005602452
808599: RNCC: 3 | RNVC: 2

1 Jan 1960

5110-00-233-9695
Hand File

002339695
40675: RNCC: 3 | RNVC: 2
A-A-2437: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
40675: RNCC: 5 | RNVC: 9
GGG-F-331 TY13CL2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-9717
Hand Rasp

002339717
A-A-2326: RNCC: 4 | RNVC: 1
17683N: RNCC: 5 | RNVC: 2
17683: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY24STB: RNCC: 5 | RNVC: 9
17683: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-363-7763
Die

003637763
8067409: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-212-2590
Cylinder Exh Holder

002122590
807158: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-084-3301
Scraping Knife

010843301
900-10: RNCC: 3 | RNVC: 2

17 Oct 1979

5110-00-294-4435
Hand Reamer

002944435
53C20381-2482: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-293-0248
Lead Picking Chisel

002930248
30048: RNCC: 3 | RNVC: 2
077: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-679-4669
Knife Blade

006794669
X19: RNCC: 3 | RNVC: 9
GGG-K-00450: RNCC: 4 | RNVC: 1
GGG-K-00450 ST1TY1CL2: RNCC: 5 | RNVC: 1
00190: RNCC: 5 | RNVC: 2
19: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-383-3451
Hand File

003833451
A-A-2307: RNCC: 4 | RNVC: 1
00001: RNCC: 5 | RNVC: 2
GGG-F-325 TY1CL1: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
00001: RNCC: 5 | RNVC: 9

21 Mar 1974

5110-00-806-9551
Diagonal Cutting Pliers

008069551
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 11 TY1CL1: RNCC: 5 | RNVC: 1
A-A-2330: RNCC: 5 | RNVC: 9
GGG-P-468: RNCC: 5 | RNVC: 9
B107.11: RNCC: 5 | RNVC: 9
B107.11 TY1CL1: RNCC: 5 | RNVC: 9
GGG-P-468 TY1CL2: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-00-357-6177
Chuck Holder

003576177
192: RNCC: 3 | RNVC: 2
192: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-357-6833
Hand Reamer Set

003576833
B94.2: RNCC: 3 | RNVC: 1
41R568: RNCC: 5 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL3GRB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-540-6983
Hand Hacksaw Blade

1 Jan 1963

5110-00-541-8746
Knockout Punch And Die

005418746
GGP836TYPE1CLASS2: RNCC: 4 | RNVC: 1

1 Jan 1963

5110-00-808-6073
Microminiature Needle Tip

008086073
MT C-110: RNCC: 3 | RNVC: 9
MT23S: RNCC: 5 | RNVC: 9
MT C-110: RNCC: C | RNVC: 1

26 Apr 1968

5110-00-529-5092
Pipe Cutter

005295092
5110-00-529-5092: RNCC: 3 | RNVC: 2
6-S: RNCC: 5 | RNVC: 2
32850: RNCC: 5 | RNVC: 2
GGG-C-771: RNCC: 5 | RNVC: 9
GGG-C-771 TY1CL1STB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-163-5979
Tube Deburring Tool Stem

001635979
D9850-13-09: RNCC: 3 | RNVC: 2

7 Feb 1973

5110-00-784-7947
Tube Deburring Tool Stem

007847947
D9849-13-20: RNCC: 3 | RNVC: 2

14 Apr 1972

5110-00-585-8426
Woodworking Butt Chisel

005858426
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1
104BC: RNCC: 5 | RNVC: 2
16-906: RNCC: 5 | RNVC: 2
16-906: RNCC: 5 | RNVC: 2
1044: RNCC: 5 | RNVC: 2
B107.44: RNCC: 5 | RNVC: 9
B107.44 TY2: RNCC: 5 | RNVC: 9
GGG-C-311 TY1CL3: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-156-0050
Hand File

001560050
A-A-2313: RNCC: 4 | RNVC: 1
A-A-2313 TY1: RNCC: 5 | RNVC: 1
05853N: RNCC: 5 | RNVC: 2
GGG-F-325 TY10CL2STA: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
05853: RNCC: 5 | RNVC: 9
05853: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-796-6847
Nibbling Tool Punch

007966847
REPLACEMENTPUNCH: RNCC: 3 | RNVC: 2
60656: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-00-180-0948
Knockout Punch And Die

001800948
GGG-P-836: RNCC: 4 | RNVC: 1
GGG-P-836 TY2: RNCC: 5 | RNVC: 1
735 7/8: RNCC: 5 | RNVC: 2
5110-00-180-0948: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-591-0411
Hand Valve Seat Cutter

005910411
262730: RNCC: 3 | RNVC: 2
262730: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-224-3856
Hand Reamer

002243856
50031BTYPEA1GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1961

5110-00-555-8281
Hand Reamer

005558281
WU7419: RNCC: 3 | RNVC: 2
226143PC2: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-253-4760
Transistor Lead Cutter

002534760
4011057-0501: RNCC: 3 | RNVC: 2

16 Jul 1969

5110-00-782-5712
Jeweler's Broach

007825712
2830: RNCC: 3 | RNVC: 9

1 Jan 1960

5110-00-238-9666
Hand File

002389666
A-A-2320: RNCC: 4 | RNVC: 1
13376: RNCC: 5 | RNVC: 2
13376: RNCC: 5 | RNVC: 9
GGG-F-325 TY17STC: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-395-8448
Hand Reamer

003958448
923245: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-632-9720
Male Refacing Tool

006329720
1C2664: RNCC: 3 | RNVC: 9
1C2664: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-784-7946
Tube Deburring Tool Stem

007847946
D9849-13-16: RNCC: 3 | RNVC: 2

14 Apr 1972

5110-00-025-2279
Hand Reamer

000252279
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
118RB: RNCC: 5 | RNVC: 9
118RB: RNCC: 5 | RNVC: 9
761-1180-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-383-3460
Hand File

003833460
VIZENFLAT8: RNCC: 3 | RNVC: 9

8 Apr 1974

5110-00-595-9297
Hand Reamer

005959297
B94.2: RNCC: 3 | RNVC: 1
761-0930-000: RNCC: 3 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
93RB: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-1148
Hand Reamer

005961148
B94.2: RNCC: 3 | RNVC: 1
764-1590-000: RNCC: 3 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
159RL: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-595-9696
Hand Reamer

005959696
53C20381-4690: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-242-0147
Hand File

002420147
5110-00-242-0147: RNCC: 3 | RNVC: 2
A-A-2445: RNCC: 5 | RNVC: 1
37877: RNCC: 5 | RNVC: 2
GGG-F-331 TY18CL4: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
37877: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-242-8185
Hand File

002428185
A-A-2321: RNCC: 4 | RNVC: 1
A-A-2321 TY3: RNCC: 5 | RNVC: 1
14698: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
14698: RNCC: 5 | RNVC: 9
GGG-F-325 TY18CL3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-142-4928
Hand Hacksaw Blade

001424928
GGG-B-451: RNCC: 4 | RNVC: 1
GGG-B-451 TY1GRACL1: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-142-5008
Two Man Crosscut Saw

001425008
GGG-S-64: RNCC: 4 | RNVC: 1
GGG-S-64 TY2CL1STA: RNCC: 5 | RNVC: 1

1 Jan 1960

5110-00-142-5009
Dovetail Saw

001425009
GGG-S-65: RNCC: 4 | RNVC: 1
GGG-S-65 TY7: RNCC: 5 | RNVC: 1
25: RNCC: 5 | RNVC: 1
25: RNCC: 5 | RNVC: 2
25: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-024-9681
Rigid Handle Machete

000249681
5110-00-024-9681: RNCC: 3 | RNVC: 2
A-A-2981: RNCC: 5 | RNVC: 9
GGG-M-45: RNCC: 5 | RNVC: 9
GGG-M-45 CL2SZ2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-025-2285
Machine And Reamer

000252285
150RL: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-186-4171
Hand Reamer

001864171
R2426: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-186-4207
Hand Reamer

001864207
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY14CL1GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-8208
Woodcarving Gouge

001868208
5: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-203-9642
Bent Trimmers Shears

002039642
5110-00-203-9642: RNCC: 3 | RNVC: 2
GGG-S-278 TY1CL2: RNCC: 5 | RNVC: 9
GGG-S-278: RNCC: 5 | RNVC: 9

1 Jan 1961

5110-00-204-0940
Dimpling Die

002040940
33D902-4: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-204-1638
Hand Reamer

002041638
53C20381-4990: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-186-8156
Firmer Chisel

001868156
302: RNCC: 3 | RNVC: 2
GGG-C-311 TY1CL4STA OR C: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9
302: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-034-4851
Hand Operated Cable Cutter

000344851
0390CSP: RNCC: 3 | RNVC: 2
0390CSP: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-480-6792
Fitting Repair Facer

004806792
PWA18812: RNCC: 3 | RNVC: 2

2 Sep 1970

5110-00-188-0740
Hand Reamer

001880740
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9
102CS 1-5/32: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-595-9273
Hand Reamer

005959273
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-595-9565
Floor Scraper

005959565
S-110: RNCC: 3 | RNVC: 2
S-110-2267: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-1143
Hand Reamer

005961143
B94.2: RNCC: 3 | RNVC: 1
761-0750-000: RNCC: 3 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
75RB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-199-0464
Hand Reamer

001990464
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL3: RNCC: 5 | RNVC: 9
1007B: RNCC: 5 | RNVC: 9
1100S 31/64 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-073-9977
Tool Front Assembly

010739977
MRN56252A4: RNCC: 3 | RNVC: 2

24 Mar 1979

5110-00-133-1885
Wire Stripper Blade Set

001331885
AS5768: RNCC: 3 | RNVC: 1
45-1611-1: RNCC: 3 | RNVC: 2
45-1611-1: RNCC: 3 | RNVC: 2
AS5768/1-B5: RNCC: 5 | RNVC: 1
45-1611-1: RNCC: 5 | RNVC: 2
VG95236T16BA003: RNCC: 5 | RNVC: 2
45-1611-1: RNCC: 5 | RNVC: 9

2 Jul 1974

5110-01-070-9670
Roofer's Scraper

010709670
583500: RNCC: 3 | RNVC: 2

26 Jan 1979

5110-00-053-3338
Cutter

000533338
PWA16671: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-188-0574
Turning Chisel

001880574
19-7: RNCC: 3 | RNVC: 2
GGG-C-311 TY1CL9STC: RNCC: 5 | RNVC: 9
19-7: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-188-6353
Hand Reamer

001886353
30050: RNCC: 3 | RNVC: 9
30050: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-006-1289
Craftsmans Knife Blade

010061289
GGG-K-00450: RNCC: 4 | RNVC: 1

14 Jul 1975

5110-00-662-8868
Hand Operated Angle Cutter

006628868
5110-00-662-8868: RNCC: 3 | RNVC: 2
2790HKP: RNCC: 5 | RNVC: 2
A-A-2969: RNCC: 5 | RNVC: 9
GGG-C-735 CL1: RNCC: 5 | RNVC: 9
2790HKP: RNCC: 5 | RNVC: 9
GGG-C-735: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-509-8076
Fastener Setting Punch

005098076
89-9951: RNCC: 3 | RNVC: 2
1155-23: RNCC: 5 | RNVC: 2
9951: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-203-6736
Hand Reamer

002036736
50031BTYPEA2GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-203-6499
Bearing Scraper

002036499
581: RNCC: 3 | RNVC: 9

5 Nov 2003

5110-00-156-0080
Hand File

001560080
5110-00-156-0080: RNCC: 3 | RNVC: 2
37898: RNCC: 5 | RNVC: 2
37905: RNCC: 5 | RNVC: 9
37905: RNCC: 5 | RNVC: 9
A-A-2446: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-156-0245
Hand File

1 Jan 1963

5110-01-035-3355
Drywall Tape Knife

010353355
84389 05348: RNCC: 3 | RNVC: 2
05 348: RNCC: 5 | RNVC: 9
84389 05348: RNCC: 5 | RNVC: 9

9 Feb 1977

5110-01-037-4762
Hand Cable Stripper

010374762
KTJ17: RNCC: 3 | RNVC: 2
KTJ17: RNCC: 5 | RNVC: 9

18 Mar 1977

5110-00-559-0117
Rivet Cutter

005590117
C4: RNCC: 3 | RNVC: 9

8 Nov 1974

5110-00-631-8930
Hand Reamer

006318930
266370-2: RNCC: 3 | RNVC: 2
266370-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-039-1125
Hand Reamer

010391125
PWA53326: RNCC: 3 | RNVC: 2

16 Apr 1977

5110-00-498-8834
Handle

004988834
TL216: RNCC: 3 | RNVC: 2
MLK7101998-41: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-499-6474
Scraper Blade

004996474
68SFG1PC25: RNCC: 3 | RNVC: 2
1936-28: RNCC: 3 | RNVC: 2
1949-28: RNCC: 3 | RNVC: 2
58X782: RNCC: 3 | RNVC: 2
68SFGPC25: RNCC: 3 | RNVC: 2
58X782-4: RNCC: 3 | RNVC: 2
1936-28: RNCC: 5 | RNVC: 9
1949-28: RNCC: 5 | RNVC: 9
68SFGPC25: RNCC: 5 | RNVC: 9
68SFG1PC25: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-9153
Hand Metal Stamping Die Set

005969153
5110-00-596-9153: RNCC: 3 | RNVC: 2
GGG-D-280: RNCC: 5 | RNVC: 9
GGG-D-280 TY2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-9336
Coping Saw Blade

005969336
GGG-B-471: RNCC: 4 | RNVC: 1
GGG-B-471 TY1CL2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-596-3025
Hand Reamer

005963025
53C20381-3740: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-268-4220
Hand Wire Stripper

002684220
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 37 TY2CL1: RNCC: 5 | RNVC: 1
45-202: RNCC: 5 | RNVC: 2
GGG-S-665 TY2CL1SZ3: RNCC: 5 | RNVC: 9
B107.37: RNCC: 5 | RNVC: 9
B107.37 TY2CL1: RNCC: 5 | RNVC: 9
GGG-S-665: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-114-1544
Precision Kni Blade

011141544
68B139-5: RNCC: 3 | RNVC: 2
AA68B139-5: RNCC: 5 | RNVC: 9

13 Jun 1981

5110-01-115-4714
Butt Marker

011154714
14-374: RNCC: 3 | RNVC: 9
14-374: RNCC: 5 | RNVC: 9

8 Jul 1981

5110-00-273-0122
Hand File

002730122
5110-00-273-0122: RNCC: 3 | RNVC: 2
84-16600: RNCC: 5 | RNVC: 2
40729: RNCC: 5 | RNVC: 2
A-A-2437: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
GGG-F-331 TY13CL2: RNCC: 5 | RNVC: 9
40729: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-049-8019
Reamer Pilot

000498019
B94.2: RNCC: 3 | RNVC: 1
RMP656: RNCC: 3 | RNVC: 2
GGG-R-180 TY4SZD: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-049-8026
Reamer Pilot

000498026
RMP1343: RNCC: 3 | RNVC: 2
GGG-R-180 TY4SZK: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-045-6207
Rasp Blade

000456207
VB-105: RNCC: 3 | RNVC: 2
294BC: RNCC: 5 | RNVC: 9
21-293: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-022-7410
Gasket Cutter Blade

010227410
AX1601: RNCC: 3 | RNVC: 2
FIG3A: RNCC: 5 | RNVC: 9

4 Jun 1976

5110-01-023-6721
Pull Bar

010236721
ZT2052 1-8: RNCC: 3 | RNVC: 2
ZT2052 1-8: RNCC: 5 | RNVC: 2

24 Jun 1976

5110-01-041-6008
Hand Operated Cable Cutter

010416008
PWA53731: RNCC: 3 | RNVC: 2

28 May 1977

5110-00-243-8099
Hand File

002438099
A-A-2323: RNCC: 4 | RNVC: 1
41F1602: RNCC: 5 | RNVC: 2
16663: RNCC: 5 | RNVC: 2
16663: RNCC: 5 | RNVC: 9
GGG-F-325 TY20STA: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-243-6911
Coping Saw Blade

002436911
65: RNCC: 3 | RNVC: 2
MSC 65: RNCC: 3 | RNVC: 2
GGG-B-471 TY1CL1: RNCC: 5 | RNVC: 9
GGG-B-471: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-011-5388
Paper Cutter

010115388
G354524: RNCC: 3 | RNVC: 9
G354524: RNCC: 5 | RNVC: 9
G354524: RNCC: 5 | RNVC: 9
G354524: RNCC: 5 | RNVC: 9
G354524: RNCC: C | RNVC: 1
G354524: RNCC: C | RNVC: 1

23 Oct 1975

5110-00-049-8017
Reamer Pilot

000498017
B94.2: RNCC: 3 | RNVC: 1
RMP531: RNCC: 3 | RNVC: 2
GGG-R-180 TY4SZB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-6885
Hand File

002396885
A-A-2317: RNCC: 4 | RNVC: 1
11118: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
11118: RNCC: 5 | RNVC: 9
GGG-F-325 TY14STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-9688
Hand File

002339688
A-A-2453: RNCC: 4 | RNVC: 1
37081: RNCC: 5 | RNVC: 2
37361: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
37361: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL12: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-006-5944
Hand Cable Stripper

010065944
45-127: RNCC: 3 | RNVC: 2

19 Jul 1975

5110-00-980-7347
Hand Reamer

009807347
3376464: RNCC: 3 | RNVC: 2
ST646: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-00-033-4846
Hand Reamer

000334846
TAM5345: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-449-7320
Gasket Cutting Punch

004497320
747: RNCC: 3 | RNVC: 2
HP20: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-194-6051
Hand Reamer

001946051
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 61/64 IN.: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-193-4997
Paring Gouge

001934997
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL3STA: RNCC: 5 | RNVC: 1
14: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-1146
Hand Reamer

005961146
50031TYPEA2GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-300-6658
Cutting Blade

003006658
N010: RNCC: 3 | RNVC: 9

6 Oct 1973

5110-01-031-6686
Hollow Cutter

010316686
AT493A1: RNCC: 3 | RNVC: 9
AT493A1: RNCC: C | RNVC: 1

30 Nov 1976

5110-00-293-0025
Jeweler's Saw Blade

002930025
GGG-B-471: RNCC: 4 | RNVC: 1
GGG-B-471 TY2: RNCC: 5 | RNVC: 1
49.410: RNCC: 5 | RNVC: 2
41899E: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-033-2196
Tube Cutter Cutting Wheel

010332196
75015: RNCC: 3 | RNVC: 2

31 Dec 1976

5110-00-294-4603
Hand Reamer

002944603
53C20381-1870: RNCC: 3 | RNVC: 2
53B20381-1870: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-077-8866
Dimpling Die

010778866
ZT1868-8: RNCC: 3 | RNVC: 2

1 Jun 1979

5110-01-045-3511
Thread Restorer File

010453511
8: RNCC: 3 | RNVC: 2
TRM8: RNCC: 3 | RNVC: 2
63480: RNCC: 5 | RNVC: 9

31 Jul 1977

5110-01-048-2199
Hand Reamer

010482199
J-22525-3: RNCC: 3 | RNVC: 2
2AH834: RNCC: 5 | RNVC: 2
2AH834: RNCC: 5 | RNVC: 9
J22525-3: RNCC: 5 | RNVC: 9

22 Sep 1977

5110-00-156-0233
Hand File

1 Jan 1963

5110-00-330-6359
Push Rod Tub Cutter

003306359
PWA5689: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-01-068-1562
Craftsman's Knife

010681562
K-1: RNCC: 3 | RNVC: 2
01.58.15.04: RNCC: 5 | RNVC: 2
01.58.15.04: RNCC: 5 | RNVC: 9
K-1: RNCC: 5 | RNVC: 9

16 Nov 1978

5110-01-084-3302
Scraping Knife

010843302
900-6: RNCC: 3 | RNVC: 2

17 Oct 1979

5110-00-115-2357
Wire Stripper Blade Set

001152357
L-5436: RNCC: 3 | RNVC: 2
7904444-01: RNCC: 5 | RNVC: 2

13 Sep 1968

5110-00-324-9375
Soft Lead Cutter

003249375
SCB105402: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-703-6907
Valve Seat H Cutter

007036907
262944: RNCC: 3 | RNVC: 2
262944: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-3383
Double Bit Ax Handle

002933383
38171W: RNCC: 3 | RNVC: 2
NN-H-93 TY1CL3: RNCC: 5 | RNVC: 9
NN-H-93: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-0624
Breast Drill

002930624
41D1666: RNCC: 3 | RNVC: 2
GGG-D-651 TY2STB: RNCC: 5 | RNVC: 9
GGG-D-651: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-073-9978
Tool Front Assembly

010739978
MRN56252A5: RNCC: 3 | RNVC: 9

24 Mar 1979

5110-00-394-5221
Snap R Dimpling Die

003945221
4G200: RNCC: 3 | RNVC: 2
4G200: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-733-7129
Shovel As Saw Knife

007337129
60C90302: RNCC: 3 | RNVC: 2

1 Jan 1960

5110-00-277-9805
Double Bow Cutting Punch

002779805
GGG-P-833: RNCC: 4 | RNVC: 1
GGG-P-833 TY1CLBST1: RNCC: 5 | RNVC: 1
01022: RNCC: 5 | RNVC: 2
149-9/16: RNCC: 5 | RNVC: 2
3427A16: RNCC: 5 | RNVC: 2
1271F: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-01-026-5000
Hand Metal Stamping Die Set

010265000
GA238: RNCC: 3 | RNVC: 2

27 Aug 1976

5110-00-371-9591
Mica Undercut Blade

003719591
UC6020: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-01-032-4225
Hand Metal Stamping Die Set

010324225
GA237: RNCC: 3 | RNVC: 2

15 Dec 1976

5110-00-709-2931
Hand File

007092931
DWG5110-00-709-2931: RNCC: 3 | RNVC: 2
AT6779H: RNCC: 5 | RNVC: 9
AT6779H: RNCC: 5 | RNVC: 9
R1482: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-220-9554
Dimpling Punch

002209554
48C19983-3: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-221-1347
Drilling Post

002211347
MIL-P-1251: RNCC: 4 | RNVC: 1
89-531: RNCC: 5 | RNVC: 9
89-531: RNCC: 5 | RNVC: 9
89-531: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-220-9535
Dimpling Die

002209535
48C19983-22: RNCC: 3 | RNVC: 2
MIL-D-922: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-222-9022
Hand Reamer

002229022
5345298: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-222-9025
Hand Reamer

002229025
5345297: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-369-4882
Turning And Pivoting Graver Set

003694882
36.800: RNCC: 3 | RNVC: 2
37972: RNCC: 5 | RNVC: 9
25-838: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-473-7517
Scraper

004737517
7735: RNCC: 3 | RNVC: 2
7735: RNCC: 5 | RNVC: 2
7077224: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-596-8488
Hand Reamer

005968488
B94.2: RNCC: 3 | RNVC: 1
764-0500-000: RNCC: 3 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
50RL: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-8651
Woodcarving Gouge

005968651
5: RNCC: 3 | RNVC: 1
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL4: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-254-3469
Chisel And Gouge Handle

002543469
5110-00-254-3469: RNCC: 3 | RNVC: 2
3001: RNCC: 3 | RNVC: 9
NN-H-00106 TY1SZ1: RNCC: 5 | RNVC: 9
NN-H-00106: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-468-7370
Coupling Tool

004687370
2461-29WPCB4: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-234-6545
Hand File

002346545
A-A-2318: RNCC: 4 | RNVC: 1
32.395: RNCC: 5 | RNVC: 2
GGG-F-325 TY16CL1STA: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-097-7839
Hand Hacksaw Blade

000977839
5110-00-097-7839: RNCC: 3 | RNVC: 2
RS1214-5: RNCC: 5 | RNVC: 2
GGG-B-451 TY1GRACL1: RNCC: 5 | RNVC: 9
GGG-B-451: RNCC: 5 | RNVC: 9
HSBM1214: RNCC: C | RNVC: 1

31 May 1968

5110-00-233-9709
Hand File

002339709
5110-00-233-9709: RNCC: 3 | RNVC: 2
37228: RNCC: 5 | RNVC: 2
GGG-F-331 TY18CL3: RNCC: 5 | RNVC: 9
A-A-2444: RNCC: 5 | RNVC: 9
37228: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-131-4016
Hand Reamer

001314016
TFIM25.0055-405: RNCC: 3 | RNVC: 9
TLD 7310 R-4-5: RNCC: 5 | RNVC: 2
TLD 7310 R-4-5: RNCC: 5 | RNVC: 9

21 Mar 1975

5110-00-131-4344
Hand Reamer

001314344
B94.2: RNCC: 3 | RNVC: 1
TFIM25.0057-406: RNCC: 3 | RNVC: 9
B94.2: RNCC: 5 | RNVC: 1
TLD 7311 R-4-6: RNCC: 5 | RNVC: 2
TLD 7311 R-4-6: RNCC: 5 | RNVC: 9

21 Mar 1975

5110-00-561-0728
Graver Sharpener

005610728
36.880: RNCC: 3 | RNVC: 2
7681015: RNCC: 5 | RNVC: 2
36-880-1: RNCC: 5 | RNVC: 9
HV-25-942: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-144-5432
Super Cutter Holder

001445432
803034: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-095-2886
Hand Reamer

000952886
PWA2766-3: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-095-3260
Reamer

000953260
PWA798: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-095-3292
Hand Reamer

000953292
TAM3574-14: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-596-0808
Bearing Scraper Set

005960808
PD5110-00-596-0808: RNCC: 3 | RNVC: 2
GGG-S-113 TY2: RNCC: 5 | RNVC: 9
GGG-S-113: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-451-7219
Key Cutting Tool

004517219
3600: RNCC: 3 | RNVC: 2
2122-100: RNCC: 5 | RNVC: 9

17 May 1971

5110-00-348-4777
Hand Reamer

003484777
GH312: RNCC: 3 | RNVC: 2
G312: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-230-1508
Hand Wire Stripper

012301508
44210-013: RNCC: 3 | RNVC: 2
44210-013: RNCC: 3 | RNVC: 9
350X777: RNCC: 5 | RNVC: 2
DS-MCO: RNCC: 5 | RNVC: 9

10 Apr 1986

5110-00-554-9756
File Handle

005549756
F51751: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-383-3458
Hand File

003833458
81-141000: RNCC: 3 | RNVC: 2

21 Mar 1974

5110-01-226-6620
Craftsman's Knife

012266620
10-300: RNCC: 3 | RNVC: 9
1400633: RNCC: 5 | RNVC: 2
10-300: RNCC: 5 | RNVC: 9

21 Feb 1986

5110-00-596-2489
Hand Reamer

005962489
53C20381-1890: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-541-3358
Hand File

005413358
5110-00-541-3358: RNCC: 3 | RNVC: 2
36450: RNCC: 5 | RNVC: 2
A-A-2429: RNCC: 5 | RNVC: 9
GGG-F-331 TY6: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
36450: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-542-2044
Knife Blade

005422044
5110-00-542-2044: RNCC: 3 | RNVC: 2
GGG-K-00450: RNCC: 5 | RNVC: 9
17: RNCC: 5 | RNVC: 9
X17: RNCC: 5 | RNVC: 9
5110PL0876577: RNCC: 6 | RNVC: 9

1 Jan 1963

5110-00-785-1433
Pipe Cutter

007851433
590K8: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-00-399-3625
Steam Lance

003993625
NY420-517PC1792: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-596-4359
Hand Reamer

005964359
53C20381-7490: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-595-8278
Glass Cutter

005958278
GGG-C-751: RNCC: 4 | RNVC: 1
GGG-C-751 TY3CL2MLB: RNCC: 5 | RNVC: 1
MS16315-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-1131
Hand Reamer

005961131
B94.2: RNCC: 3 | RNVC: 1
761-0960-000: RNCC: 3 | RNVC: 9
96RB: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-9378
Hand Reamer

005969378
B94.2: RNCC: 3 | RNVC: 1
764-0960-000: RNCC: 3 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
96RL: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-366-1469
Reamer

003661469
8070959: RNCC: 3 | RNVC: 9
8070959: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-019-4350
Pin Straightener And Cutter

000194350
8415748-501: RNCC: 3 | RNVC: 2
8415748-501: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-555-1803
Hand File

005551803
A-A-2431: RNCC: 4 | RNVC: 1
36987: RNCC: 5 | RNVC: 2
36987: RNCC: 5 | RNVC: 2
GGG-F-331 TY9: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
36987: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-405-4042
Asbestos Cement Pipe Cutter

004054042
3890-18: RNCC: 3 | RNVC: 2
ACC3: RNCC: 5 | RNVC: 9

31 Mar 1971

5110-00-030-2051
Hand Metal Stamping Die

000302051
5110-00-030-2051: RNCC: 3 | RNVC: 2
KM-157: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-273-0204
Riffler

002730204
A-A-2471: RNCC: 4 | RNVC: 1
GGG-F-331 TY20CL17: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
MS15684-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-294-4428
Hand Reamer

002944428
53C20381-5606: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-294-4601
Hand Reamer

002944601
53C20381-11200: RNCC: 3 | RNVC: 9
53C20381-11200: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-293-3021
Hand Reamer

002933021
B94.2: RNCC: 3 | RNVC: 1
7080236: RNCC: 5 | RNVC: 2
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
761-0810-000: RNCC: 5 | RNVC: 9
81RB: RNCC: 5 | RNVC: 9
M3-656: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-439-4788
End Cutting Nippers

004394788
RV24RE: RNCC: 3 | RNVC: 2
RV24: RNCC: 5 | RNVC: 9
RV24: RNCC: 5 | RNVC: 9
RV24RC: RNCC: 5 | RNVC: 9
RV24RD: RNCC: 5 | RNVC: 9
RV24RE: RNCC: 5 | RNVC: 9

15 Dec 1969

5110-00-439-7262
Scraper

004397262
PWA3277-13: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-440-5422
Fuel Filter Reamer

004405422
6797728: RNCC: 3 | RNVC: 2
6797728: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-440-9219
Reamer

004409219
923242: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-432-9181
Dimpling Die

004329181
4G100F2: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-408-2026
Hand Operated Cable Cutter

004082026
AIW6700: RNCC: 3 | RNVC: 2
312B: RNCC: 5 | RNVC: 9
AIW6496: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-411-2207
Cylinder Ridge Reamer

004112207
WR25: RNCC: 3 | RNVC: 9

15 Aug 1969

5110-00-814-2027
Crash Ax

008142027
42D8331: RNCC: 3 | RNVC: 9

27 Mar 1968

5110-00-442-1010
Electrode Cutt Tool

004421010
11-1118: RNCC: 3 | RNVC: 2
11-1118: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-768-4826
Tube Fitting Refacing Tool Set

007684826
1C2777: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-00-958-7599
Radio Freq Dresser

009587599
REC101760REVA: RNCC: 3 | RNVC: 1

25 May 1966

5110-00-614-1455
Diagonal Cutting Pliers

006141455
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 22 TY1CL1STB: RNCC: 5 | RNVC: 1
EC54-CJ: RNCC: 5 | RNVC: 2
D224-4-1/2C: RNCC: 5 | RNVC: 2
B107.22: RNCC: 5 | RNVC: 9
B107.22 TY1CL1STBDEC: RNCC: 5 | RNVC: 9
62: RNCC: 5 | RNVC: 9
EC54-CJ: RNCC: 5 | RNVC: 9
4CP18: RNCC: C | RNVC: 1
4CP28: RNCC: C | RNVC: 1

1 Jan 1963

5110-00-956-3281
Hand Wire Stripper

009563281
2441891P1: RNCC: 3 | RNVC: 1

1 Jan 1962

5110-00-175-3629
Craftsman's Knife

001753629
7016-0003P1: RNCC: 3 | RNVC: 2
63: RNCC: 5 | RNVC: 9
7016-0003: RNCC: 5 | RNVC: 9

27 Nov 1971

5110-00-161-6919
Bent Trimmers Shears

001616919
GGG-S-278: RNCC: 4 | RNVC: 1
GGG-S-278 TY1CL2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-316-4771
Air Reseating Tool

003164771
3241932: RNCC: 3 | RNVC: 2
3228388: RNCC: 3 | RNVC: 2
3241932: RNCC: 5 | RNVC: 9
3228388: RNCC: 5 | RNVC: 9
3241932: RNCC: 5 | RNVC: 9
3241932: RNCC: C | RNVC: 1

1 Jan 1963

5110-00-938-1779
Hand Reamer

009381779
ST211: RNCC: 3 | RNVC: 2

17 Mar 1967

5110-00-186-8194
Woodcarving Gouge

001868194
30: RNCC: 3 | RNVC: 1
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL4: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-186-8176
Turning Chisel

001868176
19-9: RNCC: 3 | RNVC: 2
GGG-C-311: RNCC: 5 | RNVC: 9
19-9: RNCC: 5 | RNVC: 9
2N5272: RNCC: 5 | RNVC: 9
GGG-C-311 TY1CL9STB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-049-8021
Reamer Pilot

000498021
RMP781: RNCC: 3 | RNVC: 2
GGG-R-180 TY4SZF: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-728-7992
Hand File

007287992
A-A-2437: RNCC: 4 | RNVC: 1
40663: RNCC: 5 | RNVC: 2
GGG-F-331 TY13CL2: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
40663: RNCC: 5 | RNVC: 9

1 Jan 1961

5110-00-156-0231
Hand File

001560231
GGG-F-331: RNCC: 4 | RNVC: 1
GGG-F-331 TY19CL10: RNCC: 5 | RNVC: 1
MS15665-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-4193
Hand Reamer

001864193
B94.2: RNCC: 3 | RNVC: 1
1636: RNCC: 5 | RNVC: 1
21495: RNCC: 5 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY5CL1STAGRA: RNCC: 5 | RNVC: 9
21495: RNCC: 5 | RNVC: 9
1636: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-004-5969
Die Assembly Ram

010045969
ZT185302-3-16: RNCC: 3 | RNVC: 2

10 Jun 1975

5110-01-004-5954
Die Assembly Ram

010045954
ZT175202-5-32: RNCC: 3 | RNVC: 2

10 Jun 1975

5110-00-618-2719
Hand File

006182719
A-A-2316: RNCC: 4 | RNVC: 1
09469: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
09469: RNCC: 5 | RNVC: 9
GGG-F-325 TY13CL3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-585-2391
Hand File

005852391
A-A-2316: RNCC: 4 | RNVC: 1
09389: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
09389: RNCC: 5 | RNVC: 9
GGG-F-325 TY13CL3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-004-5961
Die Assembly Ram

010045961
ZT185302-1-4: RNCC: 3 | RNVC: 2

10 Jun 1975

5110-00-540-5783
Hand File

005405783
A-A-2307: RNCC: 4 | RNVC: 1
00113: RNCC: 5 | RNVC: 2
GGG-F-325 TY1CL2: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
00113: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-398-2849
Han0 Bushing Reamer

003982849
PWA538: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-826-8857
Cable Sheathing Cutter

008268857
N2060: RNCC: 3 | RNVC: 2
138PAREN770: RNCC: 5 | RNVC: 2
138PAREN770: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-00-399-5632
Reseating Tool

003995632
B3139612: RNCC: 3 | RNVC: 2
384TD: RNCC: 5 | RNVC: 9
MAFB3087FPC189: RNCC: 5 | RNVC: 9
N384TD: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-299-8405
Craftsman's Knife

002998405
5110-00-299-8405: RNCC: 3 | RNVC: 2
70: RNCC: 5 | RNVC: 2
60022: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-299-8442
Rectangular Cutting Punch

002998442
151-1 X 5/32: RNCC: 3 | RNVC: 2
01772: RNCC: 5 | RNVC: 2
GGG-P-833 TY1CLASZ7: RNCC: 5 | RNVC: 9
GGG-P-833: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-473-7396
Bearing Scraper

004737396
7078946: RNCC: 3 | RNVC: 2
50-38: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-062-1395
Reamer

010621395
DB30504: RNCC: 3 | RNVC: 2
6106-1: RNCC: 5 | RNVC: 9

11 Jul 1978

5110-00-440-7998
Hand Reamer

004407998
99-39: RNCC: 3 | RNVC: 2
99-39: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-440-5425
Fuel Filter Reamer

004405425
6797727: RNCC: 3 | RNVC: 2
6797727: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-455-5443
Hand Operated Cable Cutter

004555443
0190CSP: RNCC: 3 | RNVC: 2
0190CS: RNCC: 5 | RNVC: 9
0190CSP: RNCC: 5 | RNVC: 9

23 Apr 1969

5110-00-255-6086
Turning Gouge

002556086
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-892-5844
Keyhole Saw Blade

008925844
MSC-1442: RNCC: 3 | RNVC: 2
GGG-S-65 TY15STC: RNCC: 5 | RNVC: 9
GGG-S-65: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-489-8136
Adapter Pin

004898136
2S8231: RNCC: 3 | RNVC: 2

17 Sep 1969

5110-00-529-3660
Firmer Gouge

005293660
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL1STB: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-529-3681
Edge Cutting Trimming Tool

005293681
126-2: RNCC: 3 | RNVC: 2
126 1-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-116-1037
Hand Cold Chisel

011161037
C-16: RNCC: 3 | RNVC: 2
1000531/4: RNCC: 5 | RNVC: 2
C-16: RNCC: 5 | RNVC: 9

20 Jul 1981

5110-00-366-1467
Hand Reamer

003661467
8064804: RNCC: 3 | RNVC: 2
8064804: RNCC: 3 | RNVC: 9
8064804: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-293-0443
Bearing Scraper

002930443
52.103: RNCC: 3 | RNVC: 2
WM-MS: RNCC: 5 | RNVC: 2
58-12: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-0465
Hatchet Handle

002930465
11734: RNCC: 3 | RNVC: 2
11734: RNCC: 5 | RNVC: 9
NN-H-93 TY4CL1: RNCC: 5 | RNVC: 9
NN-H-93: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-3046
Hand Reamer

002933046
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
65RL: RNCC: 5 | RNVC: 9
764-0650-000: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-096-4657
Hand Metal Cutting Shears

010964657
B107.500: RNCC: 3 | RNVC: 1
M1R-S1: RNCC: 5 | RNVC: 1
B107.500 CAT 16 TY2CL3: RNCC: 5 | RNVC: 1
M1R-S1 COOPER/WISS: RNCC: 5 | RNVC: 2
58013: RNCC: 5 | RNVC: 2
B107.16 TY2CL3: RNCC: 5 | RNVC: 9
9L: RNCC: 5 | RNVC: 9
M1RS1: RNCC: 5 | RNVC: 9
B107.16: RNCC: 5 | RNVC: 9
9L: RNCC: 5 | RNVC: 9

21 Jun 1980

5110-00-873-8779
Hand Reamer

008738779
B168-223-1: RNCC: 3 | RNVC: 2
5110-00-873-8779: RNCC: 5 | RNVC: 2
B168-223: RNCC: 5 | RNVC: 9

3 Nov 1967

5110-00-186-6716
Hand Reamer

001866716
B94.2: RNCC: 3 | RNVC: 1
103HS 37/64 IN.: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-7591
Hand File

002397591
A-A-2444: RNCC: 4 | RNVC: 1
37961: RNCC: 5 | RNVC: 2
GGG-F-331 TY18CL3: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
37961: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-4176
Hand Reamer

001864176
R3436: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-473-7274
Hand Reamer

004737274
221614: RNCC: 3 | RNVC: 2
6248607: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-473-7295
Hand Reamer

004737295
213778: RNCC: 3 | RNVC: 2
6248605: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-473-7298
Hand Reamer

004737298
6248330: RNCC: 3 | RNVC: 2
T18: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-473-7309
Refacer

004737309
6296135: RNCC: 3 | RNVC: 2
C-3172/C-3173: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-439-8006
Hand Reamer

004398006
TAM3574-57: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-439-8020
Hand Reamer

004398020
TAM3574-9: RNCC: 3 | RNVC: 2

1 Jan 1961

5110-00-293-3050
Hand Reamer

002933050
B94.2: RNCC: 3 | RNVC: 1
761-0500-000: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
50RB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-224-9926
Ship Scraper

002249926
PD5110-00-224-9926: RNCC: 3 | RNVC: 2
341-A: RNCC: 5 | RNVC: 2
GGG-S-116: RNCC: 5 | RNVC: 9
GGG-S-116 TY4: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-222-4998
Hollow Drill Sharpener

002224998
A4950: RNCC: 3 | RNVC: 9
K351: RNCC: 5 | RNVC: 9

9 May 1973

5110-00-440-5418
Fuel Filter Reamer

004405418
6797729: RNCC: 3 | RNVC: 2
6797729: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-289-0008
Hand Metal Stamping Die Set

002890008
5110-00-289-0008: RNCC: 3 | RNVC: 2
GGG-D-280: RNCC: 5 | RNVC: 9
MS16534-17: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-203-6537
Hand Round Nose Chisel

002036537
GGG-C-313: RNCC: 4 | RNVC: 1
GGG-C-313 TY6CL2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-156-0124
Hand File

001560124
40121: RNCC: 3 | RNVC: 2
40121: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-095-2925
Hand Reamer

000952925
PWA2969-2: RNCC: 3 | RNVC: 2
PWA2969-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-095-3290
Hand Reamer

000953290
TAM3574-12: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-095-3240
Hand Reamer

000953240
PWA638-3: RNCC: 3 | RNVC: 2

1 Jan 1960

5110-00-095-3295
Hand Reamer

000953295
TAM3574-23: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-424-0518
Cylinder Ridge Reamer

004240518
9B3086: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-189-3373
Hand Reamer

001893373
49C20285-248: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-189-3374
Hand Reamer

001893374
49C20285-188: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-189-9475
Hand Metal Stamping Die

001899475
GGG-D-280: RNCC: 4 | RNVC: 1
GGG-D-280 TY2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-227-5028
Paring Gouge

002275028
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL3STA: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-227-5034
Turning Gouge

002275034
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL2: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-203-9811
Hand File

002039811
A-A-2320: RNCC: 4 | RNVC: 1
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY17STB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-188-0742
Hand Reamer

001880742
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
102CS 1-7/32 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-220-9553
Dimpling Punch

002209553
48C19983-11: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-220-9537
Dimpling Die

002209537
48C19983-17: RNCC: 3 | RNVC: 2
MIL-D-922: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-220-9545
Dimpling Die

002209545
48C19983-21: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-224-8841
Valve Stem Guide Cleaner

002248841
5110-00-224-8841: RNCC: 3 | RNVC: 2
37559: RNCC: 5 | RNVC: 9
22810: RNCC: 5 | RNVC: 9
N343: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-224-3870
Hand Reamer

002243870
50031BTYPEA1GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-224-3852
Hand Reamer

002243852
50031BTYPEA1GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-439-7232
Reamer

004397232
PWA318: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-540-6070
Hand Reamer

005406070
256557-20: RNCC: 3 | RNVC: 2
256557-20: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-220-9546
Dimpling Die

1 Jan 1963

5110-00-595-8406
Craftsman's Knife

005958406
5110-00-595-8406: RNCC: 3 | RNVC: 2
113: RNCC: 5 | RNVC: 2
3241: RNCC: 5 | RNVC: 9
X3241: RNCC: 5 | RNVC: 9
GGG-K-00450: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-1029
Double Bit Ax

005961029
5100-9 TYA: RNCC: 4 | RNVC: 1

1 Jan 1963

5110-00-357-5881
Piston Ring Filer

003575881
870: RNCC: 3 | RNVC: 2
GGG-F-001391: RNCC: 5 | RNVC: 9
MIL-F-14292: RNCC: 5 | RNVC: 9
870: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-188-0761
Hand Reamer

001880761
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9
102CS 1-13/16 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-188-0576
Turning Chisel

001880576
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY1CL9STD: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-188-6356
Hand Reamer

001886356
30080: RNCC: 3 | RNVC: 9
30080: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-8171
Paring Chisel

001868171
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1
046305: RNCC: 5 | RNVC: 2
32-8: RNCC: 5 | RNVC: 2
828-C3208: RNCC: 5 | RNVC: 2
GGG-C-311: RNCC: 5 | RNVC: 9
B107.44 TY2: RNCC: 5 | RNVC: 9
GGG-C-311 TY1CL8STA: RNCC: 5 | RNVC: 9
32-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-234-6569
Hand File

002346569
A-A-2314: RNCC: 4 | RNVC: 1
06992: RNCC: 5 | RNVC: 2
GGG-F-325 TY11STA: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
06992: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-199-0456
Hand Reamer

001990456
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
1001: RNCC: 5 | RNVC: 9
30960: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL3: RNCC: 5 | RNVC: 9
30960: RNCC: C | RNVC: 1

1 Jan 1963

5110-00-234-6562
Hand File

002346562
A-A-2318: RNCC: 4 | RNVC: 1
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY16CL1STC: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-188-0767
Hand Reamer

001880767
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
102CS 2 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-4356
Hand Reamer

005964356
53C20381-6210: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-233-9687
Hand File

002339687
5110-00-233-9687: RNCC: 3 | RNVC: 2
37165: RNCC: 5 | RNVC: 2
GGG-F-331 TY18CL5: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
37165: RNCC: 5 | RNVC: 9
A-A-2446: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-203-6731
Hand Reamer

002036731
50031BTYPEA2GRADEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-878-3497
Hand File Set

008783497
HBR40K: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-00-142-5170
Hand Cable Stripper

001425170
5110-00-142-5170: RNCC: 3 | RNVC: 2
45-018: RNCC: 5 | RNVC: 9

7 Jun 1968

5110-00-892-5846
Compass Saw Blade

008925846
101-W: RNCC: 3 | RNVC: 9
GGG-S-65 TY4: RNCC: 5 | RNVC: 9
GGG-S-65: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-00-293-3035
Hand Reamer

002933035
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180: RNCC: 5 | RNVC: 9
118RL: RNCC: 5 | RNVC: 9
764-1180-000: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-293-3428
Hand File

002933428
A-A-2321: RNCC: 4 | RNVC: 1
14729: RNCC: 5 | RNVC: 2
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY18CL3: RNCC: 5 | RNVC: 9
14729: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-294-4461
Hand Reamer

002944461
53C20381-7475: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-294-4600
Hand Reamer

002944600
53B20381-5620: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-892-5847
Keyhole Saw

008925847
5110-00-892-5847: RNCC: 3 | RNVC: 2
GGG-S-65 TY15STC: RNCC: 5 | RNVC: 9
GGG-S-65: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-00-012-2252
Hand Reamer

000122252
810431: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-293-3297
Firmer Gouge

002933297
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL1STA: RNCC: 5 | RNVC: 1
330: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-241-9143
Hand File

002419143
5110-00-241-9143: RNCC: 3 | RNVC: 2
A-A-2316: RNCC: 5 | RNVC: 9
GGG-F-325 TY13CL2STB: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-394-5397
Hand Reamer

003945397
QB70015-2: RNCC: 3 | RNVC: 2
QB70015-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-7735
Hand File

002397735
A-A-2437: RNCC: 4 | RNVC: 1
GGG-F-331: RNCC: 5 | RNVC: 9
GGG-F-331 TY13CL2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-840-1072
Hand Reamer

008401072
GGG-R-180: RNCC: 4 | RNVC: 1
GGG-R-180 TY2CL1GRB: RNCC: 5 | RNVC: 1

1 Jan 1962

5110-00-473-7278
Hand Reamer

004737278
221625: RNCC: 3 | RNVC: 2
5345291: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-033-4938
Hand Reamer

000334938
923239: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-245-9542
Hand Commutator Slotter And Scraper

002459542
20-006: RNCC: 3 | RNVC: 2
8079491: RNCC: 3 | RNVC: 2
A-A-52130: RNCC: 4 | RNVC: 1
MIL-S-17709: RNCC: 5 | RNVC: 9
MIL-S-17709 TYE: RNCC: 5 | RNVC: 9
MS16526-1: RNCC: 5 | RNVC: 9
6: RNCC: 5 | RNVC: 9
8079491: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-3262
Hand File

002393262
A-A-2443: RNCC: 4 | RNVC: 1
37081: RNCC: 5 | RNVC: 2
GGG-F-331 TY18CL2: RNCC: 5 | RNVC: 9
37081: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-3270
Hand File

002393270
5110-00-239-3270: RNCC: 3 | RNVC: 2
37821: RNCC: 5 | RNVC: 2
A-A-2443: RNCC: 5 | RNVC: 9
GGG-F-331 TY18CL2: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
37821: RNCC: 5 | RNVC: 9
34922: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-242-3770
Craftsman's Knife

002423770
65030: RNCC: 3 | RNVC: 2
BG72: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-189-3352
Hand Reamer

001893352
49C20285-624: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-241-9133
Hand File

002419133
5110-00-241-9133: RNCC: 3 | RNVC: 2
08385: RNCC: 5 | RNVC: 2
A-A-2316: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY13CL2STB: RNCC: 5 | RNVC: 9
08385: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-241-9166
Hand File

002419166
5110-00-241-9166: RNCC: 3 | RNVC: 2
32389: RNCC: 5 | RNVC: 1
15062: RNCC: 5 | RNVC: 2
08894: RNCC: 5 | RNVC: 2
A-A-2316: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY13CL2STC: RNCC: 5 | RNVC: 9
08894: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-012-2257
Hand Reamer

000122257
810433: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-222-2120
Hand Half Round Nose Chisel

002222120
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL5: RNCC: 5 | RNVC: 1
10505: RNCC: 5 | RNVC: 2
G10-2120: RNCC: 5 | RNVC: 2
GGG-C-313: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL5: RNCC: 5 | RNVC: 9
GGG-C-313 TY6CL1STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-6694
Hand Reamer

001866694
B94.2: RNCC: 3 | RNVC: 1
5110-00-186-6694: RNCC: 5 | RNVC: 2
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
103HS 15/64 IN.: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-186-8179
Turning Chisel

001868179
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY1CL9STD: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-186-8197
Woodcarving Gouge

001868197
30: RNCC: 3 | RNVC: 1
GGG-C-311: RNCC: 4 | RNVC: 1
GGG-C-311 TY2CL4: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-224-8969
Dimpling Punch

002248969
40B3907-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-221-1376
Hardy

002211376
G10-1376: RNCC: 3 | RNVC: 2
GGG-T-00563 TY5: RNCC: 5 | RNVC: 1
GGG-T-00563: RNCC: 5 | RNVC: 1
GGG-T-563: RNCC: 5 | RNVC: 9
GGG-T-563 TY5: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-225-0864
Carbon Scraper

002250864
226162: RNCC: 3 | RNVC: 2
22667: RNCC: 5 | RNVC: 9

1 Jan 1961

5110-00-225-0863
Carbide Scraper

002250863
226163: RNCC: 3 | RNVC: 2
226163: RNCC: 5 | RNVC: 2
22663: RNCC: 5 | RNVC: 9
22668: RNCC: 5 | RNVC: 9

1 Jan 1961

5110-00-928-9445
Cylinder Ridge Reamer

009289445
WT-42744: RNCC: 3 | RNVC: 2
T42744: RNCC: 5 | RNVC: 9

24 Apr 1968

5110-00-131-3969
Hand Reamer

001313969
TFIM25.0055-404: RNCC: 3 | RNVC: 9
TLD 7310 R-4-4: RNCC: 5 | RNVC: 2

21 Mar 1975

5110-00-131-4345
Hand Reamer

001314345
TFIM25.0057-407: RNCC: 3 | RNVC: 9
TLD 7311 R-4-7: RNCC: 5 | RNVC: 2
TLD 7311 R-4-7: RNCC: 5 | RNVC: 9

21 Mar 1975

5110-00-474-9195
Hand Reamer

004749195
5380697: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-474-9193
Hand Reamer

004749193
6296271: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-181-7234
Hand Reamer

001817234
TAM3574-47: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-228-7009
Cylinder Ridge Reamer

002287009
5110-00-228-7009: RNCC: 3 | RNVC: 2
MIL-C-82069: RNCC: 5 | RNVC: 9
MILR82069: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-142-7238
Hand Reamer

001427238
TAM2114: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-223-5349
One Man Crosscut Saw

002235349
PD5110-00-223-5349: RNCC: 3 | RNVC: 2
GGG-S-64: RNCC: 5 | RNVC: 9
GGG-S-64 TY1STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-220-9544
Dimpling Die

002209544
48C19983-18: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-338-0382
Mattock Head Ax

003380382
5120-00-293-3467: RNCC: 3 | RNVC: 2
GGG-A-926: RNCC: 4 | RNVC: 1
GGG-A-926 TY3: RNCC: 5 | RNVC: 1
355: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-9698
Hand File

002339698
GGG-F-331: RNCC: 4 | RNVC: 1
GGG-F-331 TY18CL3: RNCC: 5 | RNVC: 1
37221: RNCC: 5 | RNVC: 2
37221: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-194-5980
Hand Reamer

001945980
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9
103HS 1-9/32 IN.: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-204-0725
Hand File

002040725
A-A-2323: RNCC: 4 | RNVC: 1
GGG-F-325: RNCC: 5 | RNVC: 9
GGG-F-325 TY20STC: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-359-6479
Knife Blade

003596479
X22: RNCC: 3 | RNVC: 9
GGG-K-450: RNCC: 4 | RNVC: 1
GGG-K-450 TY1CL2ST2: RNCC: 5 | RNVC: 1
22: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-908-7193
Cutter

009087193
PWA21288: RNCC: 3 | RNVC: 2

1 Jan 1960

5110-00-224-8970
Dimpling Die

002248970
36D1328-3: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-223-7781
Craftsman's Knife

002237781
5110-00-223-7781: RNCC: 3 | RNVC: 2
60132: RNCC: 5 | RNVC: 2
337: RNCC: 5 | RNVC: 2
GGG-K-481 TY3: RNCC: 5 | RNVC: 9
GGG-K-481: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-221-8133
Hand Side Cutting Chisel

002218133
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 44 TY2: RNCC: 5 | RNVC: 1
G10-8133: RNCC: 5 | RNVC: 2
B107.44: RNCC: 5 | RNVC: 9
GGG-C-313 TY7: RNCC: 5 | RNVC: 9
GGG-C-313: RNCC: 5 | RNVC: 9
9546: RNCC: 5 | RNVC: 9
5403-012: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-223-8202
Edge Cutting Trimming Tool

002238202
125: RNCC: 3 | RNVC: 1

1 Jan 1963

5110-00-223-9727
Flexible Armored Cable Cutter And Crimper

002239727
35-382: RNCC: 3 | RNVC: 2
45-079: RNCC: 5 | RNVC: 9
35-781: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-199-0455
Hand Reamer

001990455
B94.2: RNCC: 3 | RNVC: 1
30930: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
30930: RNCC: 5 | RNVC: 9
1000: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL3: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-049-8024
Reamer Pilot

000498024
RMP1062: RNCC: 3 | RNVC: 2
GGG-R-180 TY4SZI: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-049-8025
Reamer Pilot

000498025
RMP1187: RNCC: 3 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY4SZJ: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-223-1103
Hand Diamond Point Chisel

002231103
B107.410: RNCC: 3 | RNVC: 1
B107.410 CAT 48 TY1CL4: RNCC: 5 | RNVC: 1
G10-1103: RNCC: 5 | RNVC: 2
GGG-C-313 TY2STA: RNCC: 5 | RNVC: 9
GGG-C-313: RNCC: 5 | RNVC: 9
B107.48: RNCC: 5 | RNVC: 9
B107.48 TY1CL4: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-223-4972
Jeweler's Saw Frame

002234972
5110-00-223-4972: RNCC: 3 | RNVC: 2
SF19: RNCC: 5 | RNVC: 9
GGG-F-671: RNCC: 5 | RNVC: 9
GGG-F-671 TY5STA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-223-5028
Ratchet Drill

002235028
A-A-2558: RNCC: 4 | RNVC: 1
89-525: RNCC: 5 | RNVC: 9
89-525: RNCC: 5 | RNVC: 9
GGG-D-698: RNCC: 5 | RNVC: 9
89-525: RNCC: 5 | RNVC: 9
15C: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-223-5362
Crosscut Hand Saw

002235362
GGG-S-65: RNCC: 4 | RNVC: 1
GGG-S-65 TY5: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-220-9536
Dimpling Die

002209536
48C19983-14: RNCC: 3 | RNVC: 2
MIL-D-922: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-316-4777
Lube Reseating Tool

003164777
3241925: RNCC: 3 | RNVC: 2
3241925: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-009-5039
Hand File

000095039
A-A-2321: RNCC: 4 | RNVC: 1
15024: RNCC: 5 | RNVC: 2
GGG-F-325 TY18CL4: RNCC: 5 | RNVC: 9
15024: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9

4 Aug 1972

5110-00-289-0009
Hand Reamer Set

002890009
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL1GRB: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-805-1231
Riffler

008051231
5110-00-805-1231: RNCC: 3 | RNVC: 2
31.941: RNCC: 5 | RNVC: 2
36114: RNCC: 5 | RNVC: 2
GGG-F-331: RNCC: 5 | RNVC: 9
36114: RNCC: 5 | RNVC: 9
A-A-2465: RNCC: 5 | RNVC: 9
GGG-F-331 TY20CL11: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-00-127-8393
Cable Cutter Blade

001278393
H3281: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-01-077-5434
End Cutting Nippers

010775434
209: RNCC: 3 | RNVC: 2

26 May 1979

5110-00-012-2259
Hand Reamer

000122259
810435: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-116-9397
End Cutting Nippers

001169397
B107.500: RNCC: 3 | RNVC: 1
B107.500 CAT 11 TY4CL1: RNCC: 5 | RNVC: 1
14100083: RNCC: 5 | RNVC: 2
B107.11: RNCC: 5 | RNVC: 9
B107.11 TY4CL1: RNCC: 5 | RNVC: 9
1099: RNCC: 5 | RNVC: 9

5 Sep 1973

5110-00-449-7314
Gasket Cutting Punch

004497314
5110-00-449-7314: RNCC: 3 | RNVC: 2
FRS PGH8-2: RNCC: 3 | RNVC: 2
741: RNCC: 5 | RNVC: 2
PGH8-2: RNCC: 5 | RNVC: 9
HP8: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-115-2358
Wire Stripper Blade Set

001152358
L-5211: RNCC: 3 | RNVC: 2
L-5211: RNCC: 3 | RNVC: 2
VG95236T16AA009: RNCC: 5 | RNVC: 2
L5211: RNCC: 5 | RNVC: 2
L-5211: RNCC: 5 | RNVC: 2
L5211: RNCC: 5 | RNVC: 2
7904444-00: RNCC: 5 | RNVC: 2

13 Sep 1968

5110-00-720-0873
Keyhole Saw Blade

1 Jan 1963

5110-01-010-7892
Hand Wire Stripper

010107892
45-179: RNCC: 3 | RNVC: 2
GGG-S-665: RNCC: 5 | RNVC: 9
GGG-S-665 TY2CL2STA: RNCC: 5 | RNVC: 9

6 Oct 1975

5110-00-003-0537
Tube Deburring Tool Stem

000030537
D9850-13-12: RNCC: 3 | RNVC: 2

17 May 1972

5110-00-003-1537
Tube Cutter Cutting Wheel

000031537
D9853-214: RNCC: 3 | RNVC: 9

24 May 1972

5110-00-095-3278
Hand Reamer

000953278
TAM1994: RNCC: 3 | RNVC: 2

1 Jan 1961

5110-00-005-8056
Adjustment Ratchet

000058056
D9872-113: RNCC: 3 | RNVC: 9

19 Jun 1972

5110-00-050-9934
Bench Wire Stripper

000509934
766K: RNCC: 3 | RNVC: 1

1 Jan 1961

5110-00-051-3936
Wire Cutting And Skinning Tool

000513936
99050024: RNCC: 3 | RNVC: 2
A26251-1: RNCC: 5 | RNVC: 9
99050024: RNCC: 5 | RNVC: 9
A26251-1: RNCC: 5 | RNVC: 9

1 Jan 1961

5110-00-144-5188
Inl Cutter Assembly

001445188
PWA251-24: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-888-8738
Hand Reamer Set

008888738
901354-1: RNCC: 3 | RNVC: 2

1 Apr 1968

5110-01-174-4495
Pocket Knife

011744495
GA198: RNCC: 3 | RNVC: 2

19 Mar 1984

5110-00-348-4778
Hand Reamer

003484778
B94.2: RNCC: 3 | RNVC: 1
GH343: RNCC: 3 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL3: RNCC: 5 | RNVC: 9
G343: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-677-5706
Fastener Collar Cutter

006775706
105-10: RNCC: 3 | RNVC: 2
42-10: RNCC: 5 | RNVC: 9
105-10: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-684-3920
Knockout Punch And Die

006843920
GGG-P-836: RNCC: 4 | RNVC: 1
GGG-P-836 TY1CL1: RNCC: 5 | RNVC: 1
25340: RNCC: 5 | RNVC: 2
5110-00-684-3920: RNCC: 5 | RNVC: 2
730BB-11/16: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-595-9282
Hand Reamer Set

005959282
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY8CL2GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
A-A-2930: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-1049
Hand Boilermaker's Chisel

005961049
MS228075: RNCC: 3 | RNVC: 9
4556082: RNCC: 5 | RNVC: 2
4556082: RNCC: 5 | RNVC: 9
4556082: RNCC: C | RNVC: 1

1 Jan 1963

5110-00-055-6856
Cable Cutter Assy

000556856
781595-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-260-1642
Hand Reamer

002601642
B94.2: RNCC: 3 | RNVC: 1
C24516: RNCC: 5 | RNVC: 2
21244: RNCC: 5 | RNVC: 2
712-046168: RNCC: 5 | RNVC: 2
GGG-R-180: RNCC: 5 | RNVC: 9
A-A-2928: RNCC: 5 | RNVC: 9
GGG-R-180 TY1CL1GRA: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-273-0203
Riffler

002730203
A-A-2462: RNCC: 4 | RNVC: 1
GGG-F-331: RNCC: 5 | RNVC: 9
MS15675-1: RNCC: 5 | RNVC: 9
GGG-F-331 TY20CL8: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-004-5965
Die Assembly Ram

010045965
ZT186802-1-4-28: RNCC: 3 | RNVC: 2

10 Jun 1975

5110-00-293-1458
Hand Reamer

002931458
B94.2: RNCC: 3 | RNVC: 1
GGG-R-180 TY1CL2GRB: RNCC: 5 | RNVC: 9
108CS 1/2 IN.: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-640-5424
Firmer Chisel

006405424
B107.410: RNCC: 3 | RNVC: 1
5110-00-640-5424: RNCC: 3 | RNVC: 2
B107.410 CAT44 TY2: RNCC: 5 | RNVC: 1
309: RNCC: 5 | RNVC: 2
GGG-C-311 TY1CL4STA OR C: RNCC: 5 | RNVC: 9
309: RNCC: 5 | RNVC: 9
GGG-C-311: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-640-6734
Fore Plane

006406734
5110-00-640-6734: RNCC: 3 | RNVC: 2
12-906: RNCC: 5 | RNVC: 2
12-906: RNCC: 5 | RNVC: 2
GGG-P-436: RNCC: 5 | RNVC: 9
MS16390-3: RNCC: 5 | RNVC: 9
GGG-P-436 TY6CLCSZ18: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-162-2203
Bent Trimmers Shears

001622203
5110-00-162-2203: RNCC: 3 | RNVC: 2
GGG-S-278: RNCC: 5 | RNVC: 9
GGG-S-278 TY1CL2: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-596-4365
Hand Reamer

005964365
53C20381-2470: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-278-1063
Support Ramp Assembly

002781063
2624304: RNCC: 3 | RNVC: 2

8 Aug 1973

5110-00-273-0101
Cable Saw

002730101
15-643: RNCC: 3 | RNVC: 2
GGG-S-65: RNCC: 4 | RNVC: 1
GGG-S-65 TY3: RNCC: 5 | RNVC: 1
P93: RNCC: 5 | RNVC: 2
MS16327-1: RNCC: 5 | RNVC: 9
24: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-268-2904
Hand File

002682904
A-A-2454: RNCC: 4 | RNVC: 1
40972: RNCC: 5 | RNVC: 2
GGG-F-331 TY21CL2: RNCC: 5 | RNVC: 9
GGG-F-331: RNCC: 5 | RNVC: 9
40972: RNCC: 5 | RNVC: 9
34868: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-595-9707
Hand Reamer

005959707
53C20381-12450: RNCC: 3 | RNVC: 9

1 Jan 1963

5110-00-247-1566
Bearing Scraper

002471566
GGG-S-113: RNCC: 4 | RNVC: 1
GGG-S-113 TY1: RNCC: 5 | RNVC: 1

1 Jan 1963

5110-00-095-6702
Hand Reamer

000956702
HSP1397: RNCC: 3 | RNVC: 2
HSP1397: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-00-012-2251
Hand Reamer

000122251
810430: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-012-2250
Hand Reamer

000122250
810429: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-00-240-6023
Chisel Bar

002406023
B107.410: RNCC: 3 | RNVC: 1
695: RNCC: 3 | RNVC: 2
B107.410 CAT48 TY1CL1: RNCC: 5 | RNVC: 1
AJA-695: RNCC: 5 | RNVC: 2
GGG-B-101 TY1: RNCC: 5 | RNVC: 9
GGG-B-101: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-268-3883
Craftsman's Knife

002683883
5110-00-268-3883: RNCC: 3 | RNVC: 2
GGG-K-481: RNCC: 5 | RNVC: 9
GGG-K-481 TY2CL1ST2: RNCC: 5 | RNVC: 9
DEXTER7: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-239-7621
Hand File

002397621
A-A-2434: RNCC: 4 | RNVC: 1
39881: RNCC: 5 | RNVC: 2
39881: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-01-146-2583
Pipe Cutter Cutting Wheel

011462583
E-1032-S: RNCC: 3 | RNVC: 2
44190: RNCC: 5 | RNVC: 2

26 Jan 1983

5110-00-293-3036
Hand Reamer

002933036
B94.2: RNCC: 3 | RNVC: 1
764-1210-000: RNCC: 5 | RNVC: 9
GGG-R-180 TY3CL3GRA: RNCC: 5 | RNVC: 9
GGG-R-180: RNCC: 5 | RNVC: 9
121RL: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-233-9716
Hand Rasp

002339716
A-A-2326: RNCC: 4 | RNVC: 1
17615N: RNCC: 5 | RNVC: 2
GGG-F-325 TY24STB: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
17615: RNCC: 5 | RNVC: 9
17615: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-241-9140
Hand File

002419140
5110-00-241-9140: RNCC: 3 | RNVC: 2
08768: RNCC: 5 | RNVC: 2
A-A-2316: RNCC: 5 | RNVC: 9
GGG-F-325: RNCC: 5 | RNVC: 9
08768: RNCC: 5 | RNVC: 9
GGG-F-325 TY13CL2STB: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-00-131-4341
Hand Reamer

001314341
B94.2: RNCC: 3 | RNVC: 1
TFIM25.0057-404: RNCC: 3 | RNVC: 2
TLD 7311 R-4-4: RNCC: 5 | RNVC: 2
TLD 7311 R-4-4: RNCC: 5 | RNVC: 9

21 Mar 1975

5110-00-176-2921
Blade Cutter Holder

001762921
HSP1403: RNCC: 3 | RNVC: 2

1 Jan 1963

Load More Results