Hand Tools, Edged, Nonpowered from Norway (NO)

Question 1

What is Federal Supply Class 5110?

Accepted Answer

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Question 2

What is NATO Supply Classification Class 5110?

Accepted Answer

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Question 3

Which Federal Supply Group is FSC 5110 in?

Accepted Answer

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Question 4

Which NATO Supply Classification Group is NSC 5110 in?

Accepted Answer

NSC 5110is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Question 5

What is a Hand File?

Accepted Answer

A Hand File (FILE,HAND) is excludes RASP, HAND.

Question 6

What is a Hand Metal Cutting Shears?

Accepted Answer

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

Question 7

What is a Craftsman's Knife?

Accepted Answer

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

Question 8

What is a Hand Reamer?

Accepted Answer

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

Question 9

What is an End Cutting Nippers?

Accepted Answer

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

Question 10

What is a Hand Wire Stripper?

Accepted Answer

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

Question 11

What is a Bearing Scraper?

Accepted Answer

A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and&#47;or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.

Question 12

What is a Hand Hacksaw Blade?

Accepted Answer

A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.

Question 13

What is a Single Bit Ax?

Accepted Answer

A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.

Question 14

What is a Hand Cold Chisel?

Accepted Answer

A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches &#40;457.2 mm&#41; in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.

Question 15

What is a Hand Cape Chisel?

Accepted Answer

A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.

Question 16

What is a Hand File Set?

Accepted Answer

A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.

Question 17

What is a Hand Metal Stamping Die Set?

Accepted Answer

A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.

Question 18

What is a Diagonal Cutting Pliers?

Accepted Answer

A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).

Question 19

What is a Hand Operated Cable Cutter?

Accepted Answer

A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.

Question 20

What is a Knockout Punch And Die Set?

Accepted Answer

A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.

Question 21

What is a Firmer Chisel?

Accepted Answer

A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches &#40;203.2 mm&#41; long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.

Question 22

What is a File Handle?

Accepted Answer

A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.

Hand Tools, Edged, Nonpowered - Norway (NO)

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by Norway (NO) - NCB is 25

Page 5 of 5

NSN Format for Hand Tools, Edged, Nonpowered
Codified by Norway

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

Supply Items Included in Federal Supply Class 5110

Stock Items From Supply Class 5110 Page 5 of 5