5110-22-222-6750

5905-14-290-0652 5905142900652 142900652 is a thermally sensitive resistor whose primary function is to exhibit a change in electrical resistance with a change in body temperature. item may be mounted in a probe or housing. for ballast tube type resistors, see resistor (1), current regulating. excludes transmitter (1), temperature, electrical resistance and temperature element, resistance meteorological.

5325-99-437-8107 5325994378107 994378107 is a stud, turnlock fastener over which may be assembled an eyelet, turnlock fastener. stud(s) without cam slots or cam lead threads are provided with a crosspin or eared nut for locking with the mating receptacle, turnlock fastener. may be spring loaded. for like items having a threaded fastener, see screw assembly, panel or screw, panel fastener.

5310-21-844-5279 5310218445279 218445279 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

Account Upgrade 1005-00-040-9419Ammunition; Consists Of 1 Assembly P/N 192-61028-1; 1 Subassembly P/N 192-6
ADPEC : 0 1005-00-040-9419 is a Ammunition; Consists Of 1 Assembly P/N 192-61028-1; 1 Subassembly P/N 192-6

5325-99-993-0271 5325999930271 999930271 is a pinlike item designed to turn within and be held in place by an eyelet, turnlock fastener; ring, retaining; or the surface of the item it fastens. it is provided with either a cam slot, cam lead threads, or a hold for accommodating a pin. securing is accomplished by mating with a lockspring, turnlock fastener or receptacle, turnlock fastener. it has either provisions to accommodate a knob or extension or has a head which has provisions to facilitate turning.