5110-21-887-7492

3020-00-903-5858 3020009035858 009035858 is a gear, cylindrical in form, with straight teeth on the outer surface parallel to the axis of the gear. see also gear, antibacklash, spur. for bulk material, see rod, pinion.

DAC: 4 1 Jan 1970 5110-21-887-7425 Tube Cutter 39-GP-49RNCC: 4 | RNVC: 1 | DAC: 4 4 Jan 1982 5110-21-887-7492

3455-14-420-5333 3455144205333 144205333 is a rotary cutting tool with teeth on its periphery and having dished or undercut sides to afford cutting clearance. it is used for cutting off work or for narrow slotting.

4330-01-686-2518 4330016862518 016862518 is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. the removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. it may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. the degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. excludes filter element, air conditioning. see also strainer element, sediment.

5977-14-309-1682 5977143091682 143091682 is an item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. either the brush or the surface is continually moving during the transfer of energy. the brush is usually composed in part of some form of the element carbon. includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. excludes: contact, electrical; and contact assembly, electrical.