What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 90 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 90of 112

5110-99-269-1181
Hand Optical Fiber Stripper

992691181
3757-1: RNCC: 3 | RNVC: 2

20 Mar 2001

5110-15-117-1214
Diagonal Cutting Pliers

151171214
182 I: RNCC: 3 | RNVC: 2
164897455: RNCC: 5 | RNVC: 2

5 Aug 1993

5110-14-244-0903

5110-14-244-0716

5110-12-126-1976

5110-66-064-5048
Diagonal Cutting Pliers

660645048
625D45: RNCC: 3 | RNVC: 2

13 Jan 1974

5110-12-351-9118
Diagonal Cutting Pliers

123519118
8132 UND 813: RNCC: 3 | RNVC: 2

14 Sep 2000

5110-27-025-8085
Single Bit Ax Handle

270258085
500275000008: RNCC: 2 | RNVC: 1
5110KK0001117: RNCC: 2 | RNVC: 1

13 Apr 2005

5110-22-615-4629
Hand Operated Wire Rope Cutter

226154629
260210C12: RNCC: 3 | RNVC: 2

26 Jun 2007

5110-12-191-2945
Venti Fraeswerkzeug

121912945
CH1992/30: RNCC: 3 | RNVC: 2
1206 9081: RNCC: 3 | RNVC: 2
1206 9081: RNCC: 5 | RNVC: 9
12069081: RNCC: 5 | RNVC: 9
3-601-0-018-041-6: RNCC: 5 | RNVC: 9
3.601.0.018.041.6: RNCC: 5 | RNVC: 9
3.601.0.018.041.6: RNCC: 5 | RNVC: 9

26 Jan 1982

5110-25-103-7586
Hand Reamer

251037586
3SBF5110HVK6: RNCC: 2 | RNVC: 1
9-10X175FS5110-0684: RNCC: 2 | RNVC: 2
FS 5110-0684 POS 2: RNCC: 2 | RNVC: 2
TYPE K 9-10: RNCC: 3 | RNVC: 2
2370/1: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-66-012-6308
Tailor's Shears

660126308
SHEARS TAILORS 12 IN. O/A LG: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-123-2764
Lima Piatta Taglio

151232764
2600-2-10: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-129-5470
Hand Reamer

121295470
DIN206-A10-HSS: RNCC: 2 | RNVC: 2
5101HSS10: RNCC: 3 | RNVC: 2
11601HSS10: RNCC: 5 | RNVC: 2
10DIN206HSS: RNCC: 5 | RNVC: 9
A10DIN206: RNCC: 5 | RNVC: 9
DIN 206-A 10-HSS: RNCC: 5 | RNVC: 9
DIN206-A-10-HSS: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-893-1047
Hand Reamer

218931047
18-10007: RNCC: 3 | RNVC: 2
4600: RNCC: 5 | RNVC: 1

14 May 1983

5110-22-221-4575

5110-21-868-1354

5110-15-165-3760
Forbici Lama Dritta

151653760
208S: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-3994
Lima Piatta Paralle

151653994
2350G: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-17-123-8111
Boor

171238111
3C1692NSCMB5416: RNCC: 3 | RNVC: 2
3C1692: RNCC: 5 | RNVC: 2

13 Jul 2011

5110-15-165-4139
Assortimento Portai

151654139
390SE28: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-13-113-3996
One Man Crosscut Saw

131133996
99006331: RNCC: 3 | RNVC: 2

25 May 1988

5110-25-122-6161
Hand Hacksaw Blade

251226161
ECLIPSE6IN: RNCC: 3 | RNVC: 2
1400636: RNCC: 5 | RNVC: 2
LE269: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-99-787-6851
Single Bit Axe

997876851
BS2945: RNCC: 4 | RNVC: 1

25 Apr 1991

5110-12-350-9158
Hand Metal Cutting Shears

123509158
116-260-LINKS: RNCC: 3 | RNVC: 9

5 Jun 2000

5110-16-001-7112
Hand File

160017112
286213821820: RNCC: 3 | RNVC: 2

13 Mar 2002

5110-12-304-2329
Hand File

123042329
NO PRIMARY REF 12-304-2329: RNCC: 3 | RNVC: 2
1172-100-3: RNCC: 5 | RNVC: 9

28 Jun 1985

5110-17-116-1562
Hand Hacksaw Blade

171161562
3906-300-14-100P: RNCC: 3 | RNVC: 2

22 Oct 2003

5110-99-717-9763
Smooth Plane

997179763
NO PRIMARY REF 99-717-9763: RNCC: 3 | RNVC: 2
H1204: RNCC: 5 | RNVC: 2

3 Dec 1979

5110-15-195-3879
Punta Per Pompetta

151953879
189B: RNCC: 3 | RNVC: 2
(241)A5964189B: RNCC: 5 | RNVC: 2

21 Mar 2011

5110-98-107-0402
Scraper

981070402
ST 328: RNCC: 3 | RNVC: 2

9 Jun 1982

5110-15-213-7038
Taglierina

152137038
TA405A: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-713-6369
Hand Reamer

997136369
HY215406: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-15-208-3801
Alesatore

152083801
3AAXFCFRDP4-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-141-0682
Tronchese Con Tagli

151410682
456/160: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-204-2705
Coltello Stanley

152042705
OMP-HUT-026: RNCC: 3 | RNVC: 2
(241)AE591OMP-HUT-026: RNCC: 5 | RNVC: 2

13 Oct 2011

5110-25-101-3594
Hand Metal Cutting Shears

251013594
NO PRIMARY REF25-101-3594: RNCC: 3 | RNVC: 2
J4777-000292: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-99-910-4949
Hand File

999104949
DEF1098: RNCC: 4 | RNVC: 1
9104949: RNCC: 6 | RNVC: 9
1A1151: RNCC: 6 | RNVC: 9
FA13583: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-331-7053
Cutting Punch Insert

123317053
53831012: RNCC: 3 | RNVC: 2

9 Jun 1993

5110-12-353-8548
Entgrater Klinge

123538548
107061: RNCC: 3 | RNVC: 2

15 May 2001

5110-12-370-8864
Hand Wire Stripper

123708864
9030500000: RNCC: 3 | RNVC: 2
01.53.33.07: RNCC: 5 | RNVC: 2
CST: RNCC: 5 | RNVC: 2

12 Jan 2007

5110-99-120-0944
Wood Scraper Blade

991200944
H2235: RNCC: 2 | RNVC: 2
FA16736: RNCC: 6 | RNVC: 9
1C5440: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-433-2020
Toolbox

994332020
MC1278170: RNCC: 3 | RNVC: 2

17 May 2002

5110-25-103-9174

5110-25-102-1416

5110-22-301-1335

5110-25-103-8067
Track Chisel

5110-12-356-5264
Hand Operated Wire Rope Cutter

123565264
SH24: RNCC: 3 | RNVC: 2
72519000: RNCC: 5 | RNVC: 2

7 Mar 2002

5110-15-165-4154
Cesoia Tagliacanali

151654154
05920: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-3814
Lima Per Meccanica

151653814
2561312: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-136-0498

5110-21-639-6016
Miter Box And Saw

216396016
19-264: RNCC: 3 | RNVC: 2
GGG-M-451: RNCC: 4 | RNVC: 1
2246B: RNCC: 5 | RNVC: 9
246: RNCC: 5 | RNVC: 9
74: RNCC: 5 | RNVC: 9
246A: RNCC: 5 | RNVC: 9
REVC: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-21-105-2228
Hand Reamer

211052228
B94-2: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
140: RNCC: 5 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

6 Jun 1968

5110-66-158-9228
To General Assembly

661589228
208532: RNCC: 3 | RNVC: 2

22 Oct 2010

5110-12-177-9627
Fraeserfuehrung

121779627
2470-8-8-5: RNCC: 3 | RNVC: 9

9 Mar 1979

5110-15-137-8347
Lima Triangolare

151378347
2564/1-6: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-213-4307
Lama Per Seghetto B

152134307
BIMETAL: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-145-5799
Paranco Con 18 Mt.

151455799
25901003: RNCC: 3 | RNVC: 2

11 Jul 1997

5110-15-139-8063
Seghetto Archetto

151398063
1001952: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-22-600-1369
Hole Saw

226001369
30033: RNCC: 3 | RNVC: 2

30 May 2002

5110-15-176-2364
Fascia Per Segmenti

151762364
EX5110RI5204503: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-12-126-1559

5110-14-274-8084

5110-33-003-8246
Hand Metal Cutting Shears

330038246
604127: RNCC: 3 | RNVC: 2

16 Jun 1998

5110-22-221-4487

5110-12-370-0771
Ladies' Scissors

123700771
73224: RNCC: 3 | RNVC: 2

18 Sep 2006

5110-21-851-4408

5110-22-221-4630
Ship Scrapper

222214630
75-4003-5: RNCC: 3 | RNVC: 2

10 Jan 1973

5110-14-205-8245

5110-14-266-7025

5110-12-307-1105
Cable Stripper Blade

123071105
726369-1: RNCC: 3 | RNVC: 2

12 May 1986

5110-15-136-3713
Alesatore Cilindric

151363713
H1466-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-639-6119
Metal Cutting Hand Saw

216396119
350: RNCC: 3 | RNVC: 2
240: RNCC: 3 | RNVC: 2
29: RNCC: 5 | RNVC: 2
240: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-15-214-4460
Alesatore A Grande

152144460
040-8.5/9.5: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-639-4166
Hand File

216394166
02215: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-27-049-0511
Diagonal Cutting Pliers

270490511
3510140115: RNCC: 2 | RNVC: 2
3510140115: RNCC: 2 | RNVC: 2
3510140115: RNCC: 2 | RNVC: 2
3510140115: RNCC: 2 | RNVC: 2

29 Mar 2010

5110-27-005-7286
Cutting Punch Insert

270057286
DIN-6450-C3: RNCC: 3 | RNVC: 2

20 Jan 1998

5110-12-305-4666
Sheet Metal Ripping Cutter

123054666
84000/2-1183: RNCC: 3 | RNVC: 2
TL4240-0054-26: RNCC: 5 | RNVC: 2
84000/2-1183: RNCC: 5 | RNVC: 9

11 Nov 1985

5110-25-101-0747
Ha Wire Rope Cutter

5110-25-100-5859

5110-14-545-6325
Hand Operated Cable Cutter

145456325
153566: RNCC: 3 | RNVC: 2

26 Apr 2005

5110-14-530-3358
Cutting Punch Insert

145303358
245A.T34: RNCC: 3 | RNVC: 2
3148511586006: RNCC: 5 | RNVC: 2

31 May 2002

5110-66-098-3138
Hand Cape Chisel

660983138
708: RNCC: 3 | RNVC: 2

28 Jul 1978

5110-12-369-7021
Brick Chisel

123697021
3512001: RNCC: 3 | RNVC: 2
00.06.66.84: RNCC: 5 | RNVC: 2

9 Aug 2006

5110-99-713-8257
Hand Metal Stamping Die

997138257
DFHQ2593: RNCC: 3 | RNVC: 2
FHQ2593: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-236-7396
Pinza Crimpatrice

152367396
FT047A: RNCC: 3 | RNVC: 2
511015E101792: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-123-7698
Seghetto Aeg St 500

151237698
STE 500: RNCC: 3 | RNVC: 2
STE 500: RNCC: 5 | RNVC: 9

8 Oct 1996

5110-99-920-1297
Pliers

999201297
405.12RMT: RNCC: 3 | RNVC: 2
GSIPTGAMA4B2081205RETPLIERS: RNCC: 6 | RNVC: 9

7 Feb 2006

5110-99-131-0348

5110-98-800-4412
Hand Reamer

988004412
NO PRIMARY REF 98-800-4412: RNCC: 3 | RNVC: 2
PE8544: RNCC: 5 | RNVC: 2

4 Mar 1976

5110-21-639-4189

5110-15-214-9936
Forbici

152149936
3719: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-19-001-0139
Metal Cutting Hand Saw

190010139
248.002: RNCC: 3 | RNVC: 2

3 Apr 2004

5110-22-610-5777
Hand Reamer

226105777
4.204.980.120: RNCC: 3 | RNVC: 2

2 Jun 2005

5110-21-639-5563
Hand Metal Cutting Punch And Die Set

216395563
5: RNCC: 3 | RNVC: 1
300050094: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-208-2648
Alesatore

152082648
3AAWFCCNFQ27-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-123-9729
Cesoia

151239729
1894-0-750: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-568-0564
Tube Cutter

145680564
TC274: RNCC: 3 | RNVC: 2
TC-274: RNCC: 5 | RNVC: 2
TC274: RNCC: 5 | RNVC: 2

5 May 2011

5110-12-325-8331
Hand Metal Stamping Die Set

123258331
DIN7353-SATZ GROSS-12,5: RNCC: 2 | RNVC: 2

12 Jul 1991

5110-33-204-3025
Double Bow Cutting Punch

332043025
2511337: RNCC: 3 | RNVC: 2
BS-33P055874: RNCC: 5 | RNVC: 2
4940-33-P05-5874: RNCC: 6 | RNVC: 9

27 Jun 2005

5110-12-376-6689
Straight Trimmers Shears

123766689
2009.113.260: RNCC: 3 | RNVC: 2
2009/R/10": RNCC: 5 | RNVC: 2

27 Oct 2008

5110-33-145-5857

5110-99-607-9354

5110-99-978-1914
Thread Restorer File

999781914
SERIES 06425: RNCC: 3 | RNVC: 1
PRESTO: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-534-0796
Diagonal Cutting Pliers

145340796
415.MT: RNCC: 3 | RNVC: 2
3148511754979: RNCC: 5 | RNVC: 2

12 Mar 2003

5110-15-184-7359
Coltelli

151847359
NSN511015R557495: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-14-530-3419
Cutting Punch Insert

145303419
245A.T42: RNCC: 3 | RNVC: 2
3148511586402: RNCC: 5 | RNVC: 2

3 Jun 2002

5110-15-190-0134
Scalpello Nervato

151900134
000350001: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-14-239-5196

5110-15-136-3940
Lama Intercambiabil

151363940
140083: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-99-433-4730

5110-99-433-4698

5110-99-433-4709

5110-98-205-4739
Block Plane

982054739
DFAMPD00181: RNCC: 2 | RNVC: 2

11 Oct 2000

5110-15-160-9086
Chiave Sett.

151609086
F720176751: RNCC: 2 | RNVC: 2

6 Oct 2000

5110-15-134-5405
Lima Abrasiva Arkas

151345405
7624GB: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-336-5417

5110-66-011-0379
Single Bit Ax Handle

660110379
AS 1729: RNCC: 3 | RNVC: 1
127-611: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-21-906-1465
Hand Hacksaw Blade

219061465
SF1232: RNCC: 3 | RNVC: 2

29 Sep 1989

5110-15-208-8321
Mola

152088321
4MIVAJDS150: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-076-9576
Hand File

660769576
6IN ROUND BASTARD: RNCC: 3 | RNVC: 2

26 Sep 1974

5110-15-165-4146
Ugello

151654146
1850UF: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4295
Lima Taglio Mezzodo

151654295
1719AR: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-221-5187
Lama Ricambio Rasch

152215187
S74001: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-135-1605
Bolt Blade Assembly

991351605
H6669: RNCC: 2 | RNVC: 2
H924F: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-14-244-3686

5110-99-726-3765
Hand Reamer

997263765
630812: RNCC: 3 | RNVC: 2

28 Jan 1986

5110-14-273-7497

5110-15-235-9475
Cesoia Per Lamiera

152359475
75230001: RNCC: 3 | RNVC: 2
511015E142388: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-25-145-7647
Mattock Head Ax

251457647
RYDDEOEKS DIV: RNCC: 5 | RNVC: 2

26 Oct 1995

5110-15-186-5060
Serie Stampini

151865060
NOREF9900TS0003072: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-14-259-3867

5110-66-066-0089
Axe Handle Guard

660660089
4845: RNCC: 3 | RNVC: 2
JAA0318: RNCC: 3 | RNVC: 2
J1JAA0318: RNCC: 5 | RNVC: 9

12 Dec 1973

5110-12-316-7908
Knife Blade

123167908
29: RNCC: 3 | RNVC: 2
29,21: RNCC: 5 | RNVC: 2
29: RNCC: 5 | RNVC: 2
29,44: RNCC: 5 | RNVC: 2
07L1368: RNCC: 5 | RNVC: 2

14 Feb 1989

5110-22-304-0607
Konis Haand Rival

223040607
V3506-2: RNCC: 6 | RNVC: 9

21 Oct 1974

5110-98-105-2068
File Handle

981052068
3IN LG,1IN OD,0.5IN FERRULE: RNCC: 6 | RNVC: 9

23 Oct 1979

5110-99-942-0117
Hand Reamer

999420117
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16300: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-942-0320
Hand Reamer

999420320
BS122 PART 2: RNCC: 4 | RNVC: 1
BS122PT2: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9
F1FA16515: RNCC: 6 | RNVC: 9
1B1983: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-639-5710
Knockout Punch And Die

216395710
MS16323-6: RNCC: 2 | RNVC: 2
730: RNCC: 3 | RNVC: 1
GGGP836: RNCC: 4 | RNVC: 1
1002436: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-214-9951
Lima Piatta

152149951
2571/10: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-4154
Lima

152084154
3LCNTRCNBSN177-8: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-134-5838
Tagliatubi Tipo Usa

151345838
313: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-101-0057
Pliers

151010057
113-160: RNCC: 3 | RNVC: 2

22 May 1987

5110-99-757-8113
Scalpel Blades

5110-14-280-8773
Hand Masonry Drill

142808773
2402-16: RNCC: 3 | RNVC: 2
16B: RNCC: 3 | RNVC: 2
4492M16: RNCC: 3 | RNVC: 9

1 Jan 1971

5110-12-309-0756
Hand File

123090756
2132161: RNCC: 3 | RNVC: 2
2407-160-1: RNCC: 3 | RNVC: 2
2-302-16-1-0: RNCC: 3 | RNVC: 2
2132-160-1: RNCC: 5 | RNVC: 2

11 Dec 1986

5110-21-812-4795

5110-99-607-1961

5110-12-127-8137
Hand File

121278137
DIN7262-A100-2: RNCC: 2 | RNVC: 2
1232100: RNCC: 3 | RNVC: 2
1232-100-2: RNCC: 3 | RNVC: 2
1232-100-2: RNCC: 5 | RNVC: 2
A100-2DIN7262: RNCC: 5 | RNVC: 9
C100EINHIEB2DIN8336: RNCC: 5 | RNVC: 9
DIN7262A100-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-221-4908
Macchina

152214908
EX5110RI7422324: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-267-4795
Double Bow Cutting Punch

142674795
8018170001: RNCC: 3 | RNVC: 2
214-17: RNCC: 3 | RNVC: 2
4638-17: RNCC: 3 | RNVC: 9
SYB0285: RNCC: 5 | RNVC: 2
345-11-17: RNCC: 5 | RNVC: 9
376-17: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-15-208-4680
Fustella

152084680
3FANGRF047: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-190-3660
Trivellino Con Anel

151903660
3UANASCL2: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-218-1001
Pinza Plastica Plug

152181001
17704204: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-3728
Lima Mezzatonda Tag

151653728
25611: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-264-4809

5110-21-807-6170
Punch And Die

218076170
200050281: RNCC: 3 | RNVC: 1
5: RNCC: 3 | RNVC: 1

12 Aug 1963

5110-15-217-7033
Lama A Nastro Per L

152177033
MM.5100X25: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-763-8112
Hand Hacksaw Blade

997638112
NMT-141: RNCC: 3 | RNVC: 2

7 Dec 1998

5110-22-610-1775
Hand File

226101775
1-230-12-2-0: RNCC: 3 | RNVC: 2

15 Apr 2005

5110-99-978-1004

5110-21-868-1789

5110-15-137-4531
Serie Di Fustelle

151374531
3086: RNCC: 3 | RNVC: 2
3086: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-190-3551
Foretti Da Falegnam

151903551
3NANLEFTNNNP350: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-21-639-4792
Hand File

216394792
39GP53: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-14-526-3047
Exposed Blade Tube Deburring Tool

145263047
D9851M0605: RNCC: 3 | RNVC: 2

18 Jul 2001

5110-27-000-8069
Single Bow Cutting Punch

270008069
5700 24 0030: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-12-362-7926
Bearing Scraper

123627926
290: RNCC: 3 | RNVC: 2
824: RNCC: 3 | RNVC: 2
02.19.88.66: RNCC: 5 | RNVC: 2
4000896033881: RNCC: 5 | RNVC: 2

1 Apr 2004

5110-17-113-2998
Pocket Knife

171132998
PVE102329: RNCC: 3 | RNVC: 2

19 May 2000

5110-15-220-3783
Scalpello Legno Mm.

152203783
16-537: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-141-1939
Lama Per Raschietto

151411939
0-21-515: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-25-114-0207

5110-37-080-1783

5110-12-382-7052
Pipe Cutter

123827052
7.0109: RNCC: 3 | RNVC: 2

27 Jul 2010

5110-15-064-4059
Adz

150644059
60110515: RNCC: 3 | RNVC: 2

6 May 1983

5110-14-323-9107

5110-15-105-5031
Metalli Scalpello

151055031
8093751: RNCC: 3 | RNVC: 2

30 May 1989

5110-14-281-1959
Single Bow Cutting Punch

142811959
4637-15: RNCC: 3 | RNVC: 9
153-15: RNCC: 3 | RNVC: 9
107-15: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-99-910-5900
Pipe Cutter Cutting Wheel

999105900
DEF STAN 51-11 (PART 25): RNCC: 4 | RNVC: 1
DEFSTAN51-11PT25: RNCC: 6 | RNVC: 9

21 Dec 1982

5110-14-557-5765
One Man Crosscut Saw

145575765
REF 220: RNCC: 3 | RNVC: 2
TFC01A001: RNCC: 5 | RNVC: 2
220: RNCC: 5 | RNVC: 2
CPS-U: RNCC: 5 | RNVC: 9

24 Jun 2008

5110-99-942-0104
Hand Reamer

999420104
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
18MM PARALLEL HAND REAMER: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-147-6074
Batt Renseverktoey

251476074
02-V-10: RNCC: 5 | RNVC: 2

28 Apr 1998

5110-66-011-8034
Hand Cold Chisel

660118034
BS3066: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-99-530-1839
Hand Cable Stripper

995301839
AM1: RNCC: 3 | RNVC: 2
900151: RNCC: 5 | RNVC: 2
900154 (AM1): RNCC: 5 | RNVC: 2

25 Apr 1991

5110-25-145-1761
Straight Trimmers Shears

251451761
60030: RNCC: 5 | RNVC: 2

15 Mar 1995

5110-12-144-8216
Ventil Fraeserdorn

121448216
833589016300: RNCC: 3 | RNVC: 2
8335890163: RNCC: 5 | RNVC: 2

30 May 1969

5110-15-209-2531
Scalpello Hk1810 Mm

152092531
HK1810 30X220: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-125-8829
Tenaglie Falegname

151258829
1096-200: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-209-8520
Inserto Sandvik Spu

152098520
2627-26436: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-017-2410
Hand File

660172410
R0UNDFILE: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-15-214-7099
Spazzola In Setola

152147099
ART162/V: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-3709
Tronchese A Taglien

151653709
E71: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-33-155-9580
Firmer Chisel

331559580
119.120/1: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-14-310-4947
Poincon De Rabattag

143104947
568-7-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-195-3013
Apri Chiusino A Car

151953013
L70: RNCC: 3 | RNVC: 2
(241)A6766L70: RNCC: 5 | RNVC: 2

14 Mar 2011

5110-99-122-7459
Hand Reamer

991227459
BS122PT2: RNCC: 4 | RNVC: 1
H02092: RNCC: 5 | RNVC: 2
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-186-5059
Serie Stampini

151865059
NOREF9900TS0003071: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-14-324-3427
Steel Strapping Cutter

143243427
R9903701: RNCC: 3 | RNVC: 2
R990-37: RNCC: 5 | RNVC: 9

1 Jan 1975

5110-27-010-6656
Hand File

270106656
99999-NIIN-DA0037214: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-562-9334
Hand Cable Stripper

145629334
BDT1: RNCC: 3 | RNVC: 2

7 Dec 2009

5110-12-126-3372
Circle Cutter

121263372
NO PRIMARY REF 12-126-3372: RNCC: 3 | RNVC: 2
108735: RNCC: 5 | RNVC: 9
5555G: RNCC: 5 | RNVC: 9
5555GN: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-100-5046

5110-66-014-4793
Hand File

660144793
903698: RNCC: 3 | RNVC: 2
903698: RNCC: 5 | RNVC: 2
FLATFILE: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-301-6786

5110-15-154-3169
Hand Operated Cable Cutter

151543169
295IS: RNCC: 3 | RNVC: 2

24 Apr 2001

5110-15-212-3607
Seghetto Standard

152123607
546-590: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-639-4274
Hand File

216394274
903929: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-14-411-8608
Pince Coupe Verroui

144118608
464: RNCC: 3 | RNVC: 2

10 Sep 1986

5110-12-156-1523
Circle Cutter

121561523
NM180: RNCC: 3 | RNVC: 2
NM180: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-165-3941
Compressore A Leva

151653941
17501000CC: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-66-158-2990
Shouldered Punch

661582990
502AMR288-5: RNCC: 3 | RNVC: 2
502AMR288-5: RNCC: 5 | RNVC: 2

29 Oct 2009

5110-66-158-7146
Hand Reamer

661587146
TF01529-1: RNCC: 3 | RNVC: 2

24 Jun 2010

5110-66-061-0878
Hand Reamer

660610878
AS B43 PT 2: RNCC: 3 | RNVC: 1

24 Oct 1976

5110-15-184-8058
Manico

151848058
5GLEPHMD130130: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-98-205-4940
File Handle

982054940
DFAMPD00223: RNCC: 2 | RNVC: 2

17 Nov 2000

5110-15-141-1958
Tronchesino

151411958
84-302: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-98-800-7994
Hand Wire Stripper

988007994
NO PRIMARY REF 98-800-7994: RNCC: 3 | RNVC: 2
12210726: RNCC: 5 | RNVC: 2

18 Mar 1976

5110-12-131-3840
Framing Chisel

121313840
DIN5143-16GA: RNCC: 2 | RNVC: 2
16GADIN5143: RNCC: 5 | RNVC: 2
166-16: RNCC: 5 | RNVC: 9
341-16MM: RNCC: 5 | RNVC: 9
16DIN5143MG: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-130-0860

5110-17-115-0926
Beitel Handvat

171150926
25910: RNCC: 3 | RNVC: 2

8 Aug 2002

5110-99-910-9961
Hand Reamer

999109961
BS122PT2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
F1FA16216: RNCC: 6 | RNVC: 9
10119: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-214-8298
Forbici Per Lamiera

152148298
A-12: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-639-5709
Knockout Punch And Die

216395709
MS16323-5: RNCC: 2 | RNVC: 2
730: RNCC: 3 | RNVC: 1
GGGP836: RNCC: 4 | RNVC: 1
1002435: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-99-051-2840
Cleaning Tool

5110-99-458-1231

5110-14-264-4814

5110-14-229-2678
Burin Pour Les Ruba

142292678
VTR250-1096: RNCC: 3 | RNVC: 2

1 Jan 1967

5110-98-852-0085
Inlet Valve Cutter

988520085
NO PRIMARY REF 98-852-0085: RNCC: 3 | RNVC: 2
T31661S1A: RNCC: 5 | RNVC: 2

2 Nov 1978

5110-99-465-3620
Sheet Metal Punch

994653620
NO PRIMARY REF 99-465-3620: RNCC: 3 | RNVC: 2
1B5559: RNCC: 5 | RNVC: 2
1B5559: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-244-0676

5110-15-209-7813
Segaccio Sandvik

152097813
SANDVIK244: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-190-3122
Sponderuola

151903122
5QLESE10: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-208-3785
Alesatore

152083785
3AAXFCFRDP6-7: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-27-013-4219
Yan K Pense Takimi

270134219
10131KP0307: RNCC: 2 | RNVC: 1

13 Jun 2002

5110-17-121-6939
Turning And Pivoting Graver Set

171216939
ICT-1: RNCC: 3 | RNVC: 2

31 Oct 2008

5110-15-136-3783
Punzoni

151363783
7262-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-205-1941
Estrattore

152051941
0171120001: RNCC: 3 | RNVC: 2
11040-1: RNCC: 3 | RNVC: 2
(241)AA0640171120001: RNCC: 5 | RNVC: 2

24 Feb 2012

5110-21-639-5179
Hand Cold Chisel

216395179
495: RNCC: 3 | RNVC: 1
39GP43: RNCC: 4 | RNVC: 1
REVA: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-21-637-5608
Hand Reamer

216375608
CRITCHLEYANGLEBLADE: RNCC: 3 | RNVC: 1
1F108400: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-21-806-9389

5110-17-110-7381
Hand Reamer

171107381
P926-0,3125-0,2650: RNCC: 3 | RNVC: 2
P926: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-66-150-2123
Hand Hacksaw Blade

661502123
NO PRIMARY REF 66-150-2123: RNCC: 3 | RNVC: 2
07507409: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-99-136-3873
Lightweight Axe

5110-25-123-2641

5110-15-185-7546
Lama Tre Tagli Per

151857546
TRF-TAGLI: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-134-5635
Pialla A Spondervol

151345635
5837-21: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-98-200-9272
Reamer Blade Set

982009272
NO PRIMARY REF 98-200-9272: RNCC: 3 | RNVC: 2
ST 2: RNCC: 5 | RNVC: 2

20 Feb 1987

5110-25-101-9359

5110-13-120-5718
Lead Picking Chisel

131205718
00.20.25.85: RNCC: 3 | RNVC: 2

3 Apr 2009

5110-15-210-7756
Raspa Per Legno Pic

152107756
RSLP: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-219-1654
Seghetto

152191654
HS5A: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-458-1234

5110-21-845-1900

5110-14-273-7538

5110-12-121-3685
Hand Masonry Drill

121213685
NO PRIMARY REF 12-121-3685: RNCC: 3 | RNVC: 2
620425: RNCC: 5 | RNVC: 9
619-25: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-488-4873
Hand Metal Stamping Die Set

144884873
292A.3: RNCC: 3 | RNVC: 2
292A-3: RNCC: 5 | RNVC: 2
3148511663219: RNCC: 5 | RNVC: 2
0166321: RNCC: 5 | RNVC: 9
MO003461: RNCC: 6 | RNVC: 9

14 May 1997

5110-21-888-4001
Craftsman's Knife

218884001
L-1: RNCC: 3 | RNVC: 2

27 Mar 1982

5110-33-155-9819
Hand Metal Cutting Shears

331559819
909.030/1: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-21-874-2694
Craftsman's Knife

218742694
H1299: RNCC: 3 | RNVC: 2
1299: RNCC: 5 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

26 Apr 1977

5110-15-165-4135
Lima Fresatrice Pia

151654135
2610214: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4247
Punzone Per Centri

151654247
545389: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-397-4874
Outil De Denudage

143974874
73120030: RNCC: 3 | RNVC: 2
R073120030: RNCC: 5 | RNVC: 2
73020053: RNCC: 5 | RNVC: 2
91710801: RNCC: 5 | RNVC: 2

14 Dec 1984

5110-14-319-2240

5110-25-101-5544
Craftsman's Knife

251015544
SAMEC0: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-99-621-5936

5110-21-849-7780
Hand File

218497780
5110-0490: RNCC: 3 | RNVC: 2
8F4105: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-208-4965
Punzone Acc. Lungh.

152084965
3GANCNLI0T5X150: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-472-3914
Hand Metal Cutting Shears

144723914
985.ST: RNCC: 3 | RNVC: 2
3148512171003: RNCC: 5 | RNVC: 2
985ST: RNCC: 5 | RNVC: 2
0714 03 01: RNCC: 5 | RNVC: 2
0217100: RNCC: 5 | RNVC: 9

19 Oct 1994

5110-15-176-2597
Lima Quadra Usag

151762597
ART.990085: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-165-4021
Lima Diamantata Ad

151654021
972130: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-889-5874
Pott Throwing Stick

218895874
TS1: RNCC: 3 | RNVC: 2

18 Jul 1982

5110-66-010-8215
Double Bow Cutting Punch

660108215
96: RNCC: 3 | RNVC: 1
07244607: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-25-100-4139
Pipe Cutter

251004139
FS 5110-0399 POS 1: RNCC: 2 | RNVC: 2
41-2528-800-020: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-14-393-3035
Pince Coupante

143933035
5-1881D43127-204: RNCC: 3 | RNVC: 2
K0385-9036180: RNCC: 3 | RNVC: 2
K0385-7830-1850: RNCC: 5 | RNVC: 2

7 Apr 1984

5110-12-129-1370
Hand Reamer

121291370
0: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-211-2151
Lama 1 Taglio Asr

152112151
201: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-123-2614
Pinza A Becchi Mezz

151232614
ART1178: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-22-121-8494
Single Bit Ax

221218494
560H-2: RNCC: 3 | RNVC: 2
5702268856027: RNCC: 5 | RNVC: 2
885602: RNCC: 5 | RNVC: 2

14 Apr 1992

5110-15-208-4922
Alesatore

152084922
3AARFCFRDP4-8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-039-2124
Valve Seat Cutter

660392124
144503: RNCC: 3 | RNVC: 2

23 Apr 1971

5110-15-237-6906
Battiscopa Tanganic

152376906
13931100: RNCC: 3 | RNVC: 2
511015E077670: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-13-121-1601
Scraper Blade

131211601
01.00.100: RNCC: 3 | RNVC: 2

28 Apr 2011

5110-17-701-5703
Circle Cutter

177015703
5560BSS600: RNCC: 3 | RNVC: 2

15 May 1970

5110-14-287-8395
Hand Metal Stamping Die

142878395
NT92-01JUIN51P0INC0N5-3MM: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-287-8395: RNCC: 3 | RNVC: 2
NT92-01JUIN51P0INC0N5-3MM: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-27-011-3954
Hand File

270113954
99999-NIIN-DA0014035: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-121-1080
Hand Cape Chisel

121211080
DIN6451-A125: RNCC: 2 | RNVC: 2
A125DIN6451: RNCC: 5 | RNVC: 2
15600125: RNCC: 5 | RNVC: 2
DIN6451A125: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-120-0876
Bolt Cutter

991200876
924F: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H512: RNCC: 6 | RNVC: 9
FA11500: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
DL9A-H512: RNCC: 6 | RNVC: 9
H512: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-962-4057

5110-12-311-2350
Knockout Punch And Die

123112350
18.524.16: RNCC: 3 | RNVC: 2

7 Aug 1987

5110-14-274-8346

5110-99-120-5668
Wood Block

991205668
UKD1S2184: RNCC: 3 | RNVC: 1
8989: RNCC: 5 | RNVC: 2
F1FA10931: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-122-7972
Forbici 207

151227972
207001: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-190-3662
Trivellone Lungh.Mm

151903662
3UAN0RQU22X450: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-14-244-0889

5110-12-340-9102
Diagonal Cutting Pliers

123409102
5980005: RNCC: 3 | RNVC: 2

3 Jul 1996

5110-15-208-3774
Alesatore

152083774
3AAXFCFRDP5-3: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-57-440-1059
End Cutting Nippers

574401059
7814-0132 8XF KD21.XR GOST 28037: RNCC: 3 | RNVC: 2

4 Mar 2009

5110-22-126-7052
Pipe Cutter

221267052
KLP1/8-2IN: RNCC: 3 | RNVC: 2

21 Feb 2001

5110-25-102-6174
Circle Cutter

251026174
10T0100MMDIA: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-183-4895
Tronchesine

151834895
COMM631003020034: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-165-4246
Miniseghetto

151654246
734393: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4003
Lima Ad Ago Per Met

151654003
2302G: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-126-1261
Hand File

121261261
1352P200: RNCC: 3 | RNVC: 2
1352200: RNCC: 5 | RNVC: 2
1652-200: RNCC: 5 | RNVC: 9
1652W200-2: RNCC: 5 | RNVC: 9
B200X2DIN8334LEICHTMETALL: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-010-6537
Hand File

270106537
99999-NIIN-DA0037253: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-99-910-5698
Hand Rasp

999105698
BS498: RNCC: 4 | RNVC: 1

25 Apr 1991

5110-21-639-4799
Hand File

216394799
35901: RNCC: 3 | RNVC: 2
39GP53: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-15-165-3861
Forbici Per Carta

151653861
644G260: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-910-4161
Instrument Broach

999104161
DEF1198: RNCC: 4 | RNVC: 1
1A4009: RNCC: 6 | RNVC: 9
9104161: RNCC: 6 | RNVC: 9
FA10555: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4148
Instrument Broach

999104148
DEF1198: RNCC: 4 | RNVC: 1
9104148: RNCC: 6 | RNVC: 9
FA10542: RNCC: 6 | RNVC: 9
1A3996: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4066
Single Bit Ax

999104066
H96: RNCC: 2 | RNVC: 2
BS2945: RNCC: 4 | RNVC: 1
308282: RNCC: 5 | RNVC: 2
JA0064: RNCC: 6 | RNVC: 9
1A2668: RNCC: 6 | RNVC: 9
6150925: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-5175
Axe Handle

999105175
BS2945: RNCC: 4 | RNVC: 1
H20029: RNCC: 5 | RNVC: 2
FA14350: RNCC: 6 | RNVC: 9
1A3729: RNCC: 6 | RNVC: 9
9105175: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-639-6391
Ship Scraper

216396391
517: RNCC: 3 | RNVC: 2
272: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-12-155-9467
Hand Rasp

121559467
M463-252: RNCC: 3 | RNVC: 2
M463-252: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-266-6984

5110-22-304-0173

5110-22-304-0214

5110-25-108-0599
Hand File Set

5110-21-639-3202

5110-99-977-4654

5110-66-019-7348
Hand Reamer

660197348
HAND REAMER: RNCC: 3 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-22-611-6632
Diagonal Cutting Pliers

5 Oct 2005

5110-22-624-7247
Hand Cable Stripper

226247247
012998: RNCC: 3 | RNVC: 2
275.51.00.19: RNCC: 5 | RNVC: 2

18 Dec 2012

5110-15-185-1788
Coltello Multifunzi

151851788
1960202: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-22-612-4578
Single Bow Cutting Punch

226124578
71512: RNCC: 3 | RNVC: 2

12 Jan 2006

5110-15-183-4640
Coltello Universale

151834640
5232GZ: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-208-2424
Pettine

152082424
4PINDC18X2-20: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-171-9730
Craftsman's Knife

121719730
M206: RNCC: 3 | RNVC: 2
M206: RNCC: 5 | RNVC: 9

5 Dec 1977

5110-14-304-6761

5110-99-456-2244
Cutter Spring Punch

994562244
1C1863: RNCC: 3 | RNVC: 2
F1FA16046: RNCC: 6 | RNVC: 9
F1FA16046: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-814-1243
Die Dimpling Body

218141243
ZT186801-#5/16-24: RNCC: 3 | RNVC: 2
ZT186801-5-16-24: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-15-124-8208
Spazzola A Disco Co

151248208
4011-2-40: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-942-0210

5110-99-942-0058

5110-22-221-4462

5110-22-612-8683
Grinding Wheel

226128683
209388.00: RNCC: 3 | RNVC: 2

6 Mar 2006

5110-22-222-6758
Hand Rasp

222226758
OEBERG 6-343-10-2: RNCC: 5 | RNVC: 2
KABINETRASP: RNCC: 5 | RNVC: 9
KAP.01: RNCC: 5 | RNVC: 9
72-2233-1: RNCC: 6 | RNVC: 9

11 Mar 1981

5110-21-899-4778
Dimpling Die

218994778
ZT2053-1/4: RNCC: 3 | RNVC: 2
ZT2053-1-4: RNCC: 5 | RNVC: 2

8 Aug 1985

5110-27-010-6555
Hand File

270106555
99999-NIIN-DA0014096: RNCC: 2 | RNVC: 1
31952C: RNCC: 5 | RNVC: 2

21 Jun 2002

5110-27-024-9748
Hand File

270249748
00124102: RNCC: 2 | RNVC: 1

22 Dec 2004

5110-15-220-3769
Spatola Da 50

152203769
26-713: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-368-1861
Entgrater Klinge

123681861
BR2001: RNCC: 3 | RNVC: 2

4 Jan 2006

5110-99-924-2808
Ship Scraper

999242808
13522: RNCC: 3 | RNVC: 2
0276-13522: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-112-0552

5110-66-149-9399

5110-66-010-8192
Hand File

660108192
BARRETTE 140: RNCC: 3 | RNVC: 1
1002 004: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
4CUT: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-15-217-5488
Manico Per Lima

152175488
EXRI7905149: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-33-207-2519
File Handle

332072519
0970.05000: RNCC: 3 | RNVC: 2
534.441: RNCC: 3 | RNVC: 2
369.050: RNCC: 3 | RNVC: 2

2 Feb 2009

5110-12-141-1000

5110-25-101-9361

5110-25-102-1551

5110-25-129-4035
Knife Blade

251294035
RKB2: RNCC: 3 | RNVC: 2
RKB2: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-12-338-0175
Hand Reamer

123380175
100.12.000: RNCC: 3 | RNVC: 2
TYPE:12-13,5MM: RNCC: 5 | RNVC: 2

11 May 1995

5110-15-143-4829
Scalpello Nervato

151434829
351-175: RNCC: 3 | RNVC: 2
351/175: RNCC: 3 | RNVC: 2
351004: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-14-318-2534

5110-23-114-2629
Insulate Nipper

231142629
GR 4-314: RNCC: 3 | RNVC: 2

20 Aug 2008

5110-99-762-5506
Inner-Outer Reamer

997625506
208-FSS: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-66-011-4836
Hand Reamer

660114836
606A05625: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-99-977-0207
Pipe Cutter

999770207
271U: RNCC: 3 | RNVC: 2
363SS: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-21-864-0705

5110-22-307-0212

5110-22-301-2279

5110-22-616-0042
Knife Blade

226160042
50120320: RNCC: 3 | RNVC: 2

23 Oct 2007

5110-14-282-8397

5110-66-107-8862
Hand Reamer

5110-17-115-3731
Diagonal Cutting Pliers

171153731
3799HF: RNCC: 3 | RNVC: 2

15 Jan 2003

5110-12-336-7442
Hand Cold Chisel

123367442
4990032-000.02: RNCC: 3 | RNVC: 2
MAGERD G496: RNCC: 5 | RNVC: 9

19 Dec 1994

5110-99-120-4543

5110-27-011-7674
Hand Reamer

270117674
09013KR1078: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-21-843-5184

5110-21-818-9991

5110-99-120-2176
Hand Reamer

991202176
BS3088: RNCC: 4 | RNVC: 1
H20734: RNCC: 5 | RNVC: 2
HZ: RNCC: 5 | RNVC: 2
DEFSTAN51-9: RNCC: 6 | RNVC: 9
0275-16533: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-503-8829
File Handle

995038829
NO PRIMARY REF 99-503-8829: RNCC: 3 | RNVC: 2
7311518193409: RNCC: 5 | RNVC: 2
9-486-04-1P: RNCC: 5 | RNVC: 2
020AD-011: RNCC: 6 | RNVC: 9

30 Jan 2002

5110-15-230-4193
Scalpello Per Legno

152304193
6050/2-10: RNCC: 3 | RNVC: 2
511015E090642: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-12-318-9687
Hand Reamer Set

123189687
USE: RNCC: 3 | RNVC: 2
130.00.200: RNCC: 5 | RNVC: 2

28 Aug 1989

5110-15-176-6141
Fresa Cilindrica Mm

151766141
ART53MM20: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-13-110-6211
Metal Cuttin Shears

5110-27-014-9011
Single Bow Cutting Punch

270149011
5110ATFD0123: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-15-208-4157
Lima

152084157
3LCNTRCNMDN127: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-432-9045

5110-22-619-5503
Tube Cutter

226195503
2440054: RNCC: 3 | RNVC: 2

5 Aug 2009

5110-99-433-4743

5110-99-432-8928

5110-98-205-4232
File Handle

982054232
DFAMPD00090/3: RNCC: 2 | RNVC: 2

16 Aug 2000

5110-15-208-4656
Fustella

152084656
3FANGRF022: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-074-6194
File Holder

150746194
16INART110PIATTAPARALLELA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-21-859-1600
Hand File Set

218591600
39GP53: RNCC: 4 | RNVC: 1

18 Jun 1970

5110-15-171-5109
Chiave Fissa 12 X 1

151715109
CHIAVE FISSA 12 X 13 PASTORINO: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-17-120-3547
Hand Reamer

171203547
B9525.5: RNCC: 3 | RNVC: 2

10 Apr 2007

5110-15-236-6686
Spatole Conf.Da 3

152366686
0695928067: RNCC: 3 | RNVC: 2
511015E133635: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-214-4492
Set Di Marchi Contr

152144492
294.5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-34-030-0560
Chisel Bar

340300560
OREA 32: RNCC: 3 | RNVC: 2
OREA 32: RNCC: 6 | RNVC: 9

3 Jul 2003

5110-66-010-7938
Adjustab Blade Set

660107938
MICR0SETBLADESETC: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-12-136-8485
Diagonal Cutting Pliers

121368485
2663B: RNCC: 3 | RNVC: 2
106588: RNCC: 5 | RNVC: 2
2663NB: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-125-1213
Pialla In Legno Di

151251213
5830: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-125-1136
Rotella Per Tagliat

151251136
2414: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-457-9826
Diamant De Taillage

144579826
600165: RNCC: 3 | RNVC: 2
F300 0T 012 1645: RNCC: 6 | RNVC: 9

2 Oct 1992

5110-12-126-1482
Hand Reamer

121261482
DIN9-A4: RNCC: 2 | RNVC: 2
501-A4: RNCC: 3 | RNVC: 2
A4DIN9: RNCC: 5 | RNVC: 2
513E204HSS4: RNCC: 5 | RNVC: 9
DIN9A4: RNCC: 5 | RNVC: 9
4DIN9SCHNELLARBEITSSTAHL: RNCC: 5 | RNVC: 9

30 May 1969

5110-17-704-3089
Schaar Knoopsgat St

177043089
NO PRIMARY REF 17-704-3089: RNCC: 3 | RNVC: 2
09-4-1-2: RNCC: 5 | RNVC: 9

30 Sep 1971

5110-99-740-3982

5110-99-465-3174

5110-25-110-8995

5110-14-571-2263
Tube Cutter

145712263
238B.16: RNCC: 3 | RNVC: 2
FACOM 238B.16: RNCC: 5 | RNVC: 2
FACOM 238B.16: RNCC: 5 | RNVC: 2

1 Mar 2012

5110-22-269-1062
Grinding Ring

222691062
62079-10H-2164: RNCC: 3 | RNVC: 2
62079-10H-2164: RNCC: 5 | RNVC: 2

7 Jun 1996

5110-22-610-5000
Circle Cutter

226105000
4.328.903.916: RNCC: 3 | RNVC: 2

26 May 2005

5110-12-174-7232
Hand Operated Cable Cutter

121747232
MODELL K2: RNCC: 3 | RNVC: 2
80.163: RNCC: 5 | RNVC: 2
K II: RNCC: 5 | RNVC: 2
K2: RNCC: 5 | RNVC: 9

25 Jul 1978

5110-12-122-2513
Hand Reamer

121222513
513A203HSS9-32: RNCC: 3 | RNVC: 2

30 May 1969

5110-13-120-5931
Cutting Punch Insert

131205931
09014O01: RNCC: 3 | RNVC: 2

8 May 2009

5110-66-013-5541
Hand File

660135541
913229: RNCC: 3 | RNVC: 2
913229: RNCC: 5 | RNVC: 2
SQUAREFILE: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-201-9883

5110-15-123-6551
Cesoia Per Lamiera

151236551
2087/2: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-216-4147
Serie Lime Semitond

152164147
LIMESEMITONDE: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-184-6180
Bedano

151846180
3QANFLM22: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-851-2640
Two Man Crosscut Saw

218512640
13: RNCC: 3 | RNVC: 2
5110-1046: RNCC: 6 | RNVC: 9

6 Oct 1968

5110-12-120-6005
Hand Masonry Drill

30 May 1969

5110-21-883-1760
Riffler

218831760
STYLE9: RNCC: 3 | RNVC: 1
941090: RNCC: 5 | RNVC: 2

27 Jan 1981

5110-26-300-4052
Single Bit Ax

263004052
380-4083806257: RNCC: 3 | RNVC: 2

13 Jul 2007

5110-15-221-4891
Fustella

152214891
EX5110RN0406446: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-4301
Testa Di Ricambio

151654301
1100R350: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-27-045-2405
Hand File

270452405
J55-310H: RNCC: 2 | RNVC: 1

17 Apr 2009

5110-12-177-4819
Plumber's Saw Blade

121774819
666-011: RNCC: 3 | RNVC: 2
40027203: RNCC: 3 | RNVC: 2
51841010: RNCC: 3 | RNVC: 2
51841: RNCC: 5 | RNVC: 9

1 Feb 1979

5110-25-140-9117
Hand File

5110-22-115-2825

5110-12-306-6653
End Cutting Nippers

123066653
NO PRIMARY REF 12-306-6653: RNCC: 3 | RNVC: 2
147559: RNCC: 5 | RNVC: 9
2658D: RNCC: 5 | RNVC: 9

19 Mar 1986

5110-14-574-3828
Hand File

145743828
RD-D200+MAN3: RNCC: 3 | RNVC: 2

15 Jan 2013

5110-99-495-9068
Craftsman's Knife

994959068
FP-2220: RNCC: 3 | RNVC: 2

26 Oct 2000

5110-14-570-8971
Hand File

145708971
LT-20-ME: RNCC: 3 | RNVC: 2

1 Feb 2012

5110-15-209-8222
Lima Ad Ago

152098222
991-004: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-100-4179
Smooth Plane

251004179
NO PRIMARY REF25-100-4179: RNCC: 3 | RNVC: 2
41-5888-200-240: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-25-100-4303
Draw Knife

5110-25-103-0778

5110-21-877-4991
Hand Reamer

218774991
J6036: RNCC: 3 | RNVC: 2

5 Apr 1978

Load More Results