What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 89 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 89of 112

5110-66-149-8152
Hand Metal Cutting Shears

661498152
NO PRIMARY REF 66-149-8152: RNCC: 3 | RNVC: 2
09919011: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-22-617-0117
Blacksmith's Chisel

226170117
3380-22: RNCC: 3 | RNVC: 2

22 Apr 2008

5110-99-833-2342
Reamerline

998332342
R6Y206/27: RNCC: 3 | RNVC: 2
26DL-96096: RNCC: 6 | RNVC: 9

20 Jun 2002

5110-15-230-5383
Tronchesi Taglienti

152305383
511015E064249: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-217-5489
Seghetto Facom

152175489
EXRI7905213: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-17-118-2290
Entry Tool Pack

171182290
DE-METP: RNCC: 3 | RNVC: 2

16 Jan 2006

5110-15-122-7973
Tagliatubi Per Tubi

151227973
330: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-310-4213
Bloc De Presertissa

143104213
PS20K: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-475-8233
Hand Cable Stripper

144758233
R299510000: RNCC: 3 | RNVC: 2
R299510: RNCC: 5 | RNVC: 2
85-695-2652: RNCC: 6 | RNVC: 9

3 May 1995

5110-15-159-9358
Punti Graffettatric

151599358
M77-1000: RNCC: 3 | RNVC: 2
(241)AE208M77-1000: RNCC: 5 | RNVC: 2

15 Apr 2004

5110-27-010-6695
Hand File

270106695
99999-NIIN-DA0014313: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-25-122-6473

5110-25-102-7244

5110-99-454-1879

5110-66-016-4780
Ridge Reamer Pad

660164780
851208: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-184-6178
Bedano

151846178
3QANFLM30: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-208-4867
Cesoia

152084867
4KCAAMDX250: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-868-1792
Ice Ax

218681792
ASCHENBRENNERICEAXE: RNCC: 3 | RNVC: 1

15 Dec 1972

5110-25-106-1247
Double Bow Cutting Punch

251061247
NO PRIMARY REF25-106-1247: RNCC: 3 | RNVC: 2
1711-1907: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-15-209-8271
Seghetto Mm250

152098271
607-250: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-165-5342
Pipe Cutter

121655342
NO PRIMARY REF 12-165-5342: RNCC: 3 | RNVC: 2
4485MD: RNCC: 5 | RNVC: 9

25 May 1976

5110-27-000-8044
Single Bow Cutting Punch

270008044
5700 24 0005: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-99-127-9998

5110-22-618-3689
Tube Cutter

226183689
11800751: RNCC: 3 | RNVC: 2

4 Dec 2008

5110-99-705-6446
Canopy Cracker

997056446
MC1151: RNCC: 3 | RNVC: 2
MC1151000: RNCC: 5 | RNVC: 2
0227H-003: RNCC: 6 | RNVC: 9
021YQ-005: RNCC: 6 | RNVC: 9

22 Jul 2002

5110-12-126-1894
Cutting Punch Insert

121261894
TL5110-0033-B8: RNCC: 2 | RNVC: 2
8660: RNCC: 3 | RNVC: 2
1660: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-177-5815
Locheisen

121775815
6888-4X18: RNCC: 3 | RNVC: 9

7 Feb 1979

5110-12-137-9876

5110-22-221-4615
Bearing Scraper

222214615
KLINGE 125X15MMTOTAL 235MM: RNCC: 3 | RNVC: 2

9 Jan 1973

5110-41-000-5762
Diagonal Cutting Pliers

410005762
590005238140: RNCC: 3 | RNVC: 2

6 Feb 2008

5110-21-883-1787
Hand File

218831787
39GP30: RNCC: 4 | RNVC: 1

3 Feb 1981

5110-22-116-8408

5110-15-222-0006
Serie Lame Seghetto

152220006
TFS618R: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-216-5635
Lama Per Seghetto (

152165635
HSBM1018: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-727-0615

5110-23-111-2546
Hand Wire Stripper

231112546
720526: RNCC: 3 | RNVC: 2

31 May 1991

5110-14-274-2427

5110-22-302-9028

5110-22-302-8978

5110-12-320-7270
Bucksaw

123207270
2-730: RNCC: 3 | RNVC: 2
87-700: RNCC: 3 | RNVC: 2
65-700 FESTE ANGEL: RNCC: 5 | RNVC: 9

9 Feb 1990

5110-15-208-4869
Estrattore

152084869
5EAZPREL9-4A15: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-98-103-3609
Smooth Plane

981033609
NO PRIMARY REF 98-103-3609: RNCC: 3 | RNVC: 2
3 SMOOTH: RNCC: 5 | RNVC: 2
03: RNCC: 5 | RNVC: 2

1 Jun 1990

5110-21-859-0425

5110-17-700-9996
Hand Steen Boor

5110-14-503-8404

5110-22-304-1767

5110-99-719-8791

5110-66-037-7729
Miter Box

660377729
19-114: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

24 Feb 1971

5110-99-940-4297
Pocket Knife

999404297
50-0951-000: RNCC: 3 | RNVC: 2
50-0951-000: RNCC: 5 | RNVC: 9

25 Apr 1991

5110-14-280-8776
Hand Masonry Drill

142808776
2402-24: RNCC: 3 | RNVC: 2
24B: RNCC: 3 | RNVC: 2
4492M24: RNCC: 3 | RNVC: 9

1 Jan 1971

5110-15-234-7178
Spatola Con Manico

152347178
422-40: RNCC: 3 | RNVC: 2
SERIE 172: RNCC: 3 | RNVC: 2
511015E045528: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-17-110-0510
Allesknipper

171100510
0102504: RNCC: 3 | RNVC: 2

17 Apr 1996

5110-99-135-5207
Combination Plane

991355207
H6684: RNCC: 2 | RNVC: 2
050C: RNCC: 3 | RNVC: 1

25 Apr 1991

5110-21-639-4357
Hand File

216394357
39GP30: RNCC: 4 | RNVC: 1
41F1572: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-12-120-4758
Rip Hand Saw

121204758
513-500: RNCC: 3 | RNVC: 2
1245001: RNCC: 5 | RNVC: 2
142-500: RNCC: 5 | RNVC: 9
500DIN7244: RNCC: 5 | RNVC: 9
DIN7244-500: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-131-7014
Reamer Blade Set

121317014
131.12.400: RNCC: 3 | RNVC: 2
131-12-400: RNCC: 5 | RNVC: 2
700-13HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-028-5392
Diagonal Cutting Pliers

660285392
MS54-5: RNCC: 3 | RNVC: 1
47-4JCSN: RNCC: 3 | RNVC: 2
RE1200-27: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-12-127-7387
Single Bow Cutting Punch

121277387
DIN7200-B15: RNCC: 2 | RNVC: 2
B15DIN7200: RNCC: 5 | RNVC: 2
DIN7200B15: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-129-3913
Hand Reamer

121293913
DIN859-B13,5-HSS: RNCC: 2 | RNVC: 2
11606999-13,5: RNCC: 3 | RNVC: 2
011011-13,5: RNCC: 3 | RNVC: 2
415-13,50: RNCC: 3 | RNVC: 2
13-5DIN859SCHNELLARBEITSSTAHLSP-: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-122-2486
Hand Reamer

121222486
105.21.000: RNCC: 3 | RNVC: 2
105-21-000: RNCC: 5 | RNVC: 2
LLSS: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-018-6071
Hand Reamer

270186071
5110-42276-00007: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-184-1872
Accetta Tipo Pompie

151841872
C0MM621006010059: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-104-9838

5110-12-364-3158
Craftsman's Knife

123643158
77020000-TCS: RNCC: 3 | RNVC: 2

9 Sep 2004

5110-15-165-3678
Tagliatubo D'accia

151653678
1064G182: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-219-4643
Maschio Gas Cil.1-1

152194643
165T325-1-1/8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-807-1131

5110-15-230-4041
Archetto Per Seghet

152304041
2764/0: RNCC: 3 | RNVC: 2
511015E068581: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-12-126-1490
Hand Reamer

121261490
NO PRIMARY REF 12-126-1490: RNCC: 3 | RNVC: 2
5-3DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-122-8505
Kabelsaks

5110-99-910-5013

5110-25-100-1985
Hand Cape Chisel

5110-25-101-9354

5110-25-145-7605
Mattock Head Ax

5110-25-116-3273
Loevsag

5110-25-120-3924

5110-25-120-3923

5110-37-180-1113

5110-99-252-8403
Deburring Too Blade

992528403
D80: RNCC: 3 | RNVC: 2
1C/8697: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-559-5565
End Cutting Nippers

145595565
191A.18EL: RNCC: 3 | RNVC: 9

26 Jan 2009

5110-32-001-1479
File Handle

320011479
NO PRIMARY REF 32-001-1479: RNCC: 3 | RNVC: 2
03338E: RNCC: 5 | RNVC: 9

26 Oct 1976

5110-99-910-6484
Hand Metal Stamping Die

999106484
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H2637: RNCC: 6 | RNVC: 9
H2637: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-175-2989
Plumber's Saw Blade

121752989
666-016: RNCC: 3 | RNVC: 2
40026106: RNCC: 3 | RNVC: 2
51843007: RNCC: 3 | RNVC: 2
4046525: RNCC: 3 | RNVC: 2

6 Sep 1978

5110-22-612-7824
Exposed Blade Tube Deburring Tool

226127824
799300300: RNCC: 3 | RNVC: 2

21 Feb 2006

5110-21-899-4594
Hand Cape Chisel

218994594
193: RNCC: 3 | RNVC: 2

29 May 1985

5110-12-374-3949
Hand Cold Chisel

123743949
70020003-TCS: RNCC: 3 | RNVC: 2

13 Feb 2008

5110-15-184-7045
Manico

151847045
5GLELRCN60: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-392-9689
Hand Cable Stripper

123929689
BN541343: RNCC: 3 | RNVC: 2
541343: RNCC: 5 | RNVC: 2

26 Jul 2013

5110-22-618-5372
Tube Cutter

226185372
00093873: RNCC: 3 | RNVC: 2

19 Jan 2009

5110-21-104-9851
Turning Chisel

211049851
476: RNCC: 3 | RNVC: 1
GGG-C-311: RNCC: 4 | RNVC: 1
REVB: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-12-120-9401
Hand File

121209401
2142203: RNCC: 3 | RNVC: 2
2408-200-3: RNCC: 3 | RNVC: 2
F100X3DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-112-0094

5110-99-881-4500

5110-19-004-2535
Bent Trimmers Shears

190042535
25914100: RNCC: 3 | RNVC: 2

10 Nov 2010

5110-21-637-4317
Hand Masonry Drill

216374317
13 3-8: RNCC: 3 | RNVC: 2
1225-12: RNCC: 3 | RNVC: 2
8D4317: RNCC: 6 | RNVC: 9

4 Jun 1968

5110-12-174-5274
Broad Hatchet

121745274
DIN5131-B 1200IS: RNCC: 2 | RNVC: 9
3352-1200: RNCC: 5 | RNVC: 9
1200-1SDIN5131B: RNCC: 5 | RNVC: 9

5 Jul 1978

5110-15-190-3116
Cesola

151903116
DLLMM600: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-99-978-1908
Nut Splitter

999781908
NS3: RNCC: 3 | RNVC: 2
NS3: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-99-721-6388

5110-15-208-4652
Fustella Per Guarni

152084652
3FANGRF018: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-254-0455

5110-22-221-3879
Hand File

222213879
OEBERG 2-308-16-1: RNCC: 5 | RNVC: 2
KAP.01: RNCC: 5 | RNVC: 9
NAALEFIL: RNCC: 5 | RNVC: 9

13 Dec 1972

5110-15-165-3766
Archetto Per Seghet

151653766
28031: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-122-4737
Pliers

151224737
1082-160: RNCC: 3 | RNVC: 2

30 Jul 1996

5110-66-012-0764
Firmer Chisel

660120764
4 7-8IN X 5-8IN: RNCC: 3 | RNVC: 2
16-710: RNCC: 3 | RNVC: 2
16-146: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-21-639-3983

5110-25-140-9116
Hand File

5110-66-149-7539
Hand File

661497539
NO PRIMARY REF 66-149-7539: RNCC: 3 | RNVC: 2
07083101: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-15-214-0946
Piccone Acciaio For

152140946
50228: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-8109
Alesatore

152088109
3AAWFCFRDP4-7: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-238-1886
Pinza Forassegni

152381886
3170: RNCC: 3 | RNVC: 2
511015E147546: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-14-305-6056

5110-66-150-5798
Scraper Blade

661505798
NO PRIMARY REF 66-150-5798: RNCC: 3 | RNVC: 2
00410055: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-99-910-5553
Cutting Punch

999105553
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H1880: RNCC: 6 | RNVC: 9
H1880: RNCC: 6 | RNVC: 9
FA15936: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-37-525-4253
Piston Ring Groove Reconditioning Tool

375254253
91.170: RNCC: 3 | RNVC: 2

26 Jan 2013

5110-22-100-0941
Saw Blade

221000941
KLINGE-99/700: RNCC: 3 | RNVC: 2
11.58-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-15-216-3836
Coppia Punzoni Per

152163836
PUNZONI: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-126-1642
Hand File

121261642
VG95211-ML-121261642: RNCC: 2 | RNVC: 2
1312P200: RNCC: 3 | RNVC: 2
1312-200: RNCC: 3 | RNVC: 2
1312200: RNCC: 5 | RNVC: 2
C200X2DIN8331LEICHTMETALL: RNCC: 5 | RNVC: 9
1312-200: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-639-4169
Hand File

216394169
902435: RNCC: 3 | RNVC: 2
902435: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1
02435: RNCC: 5 | RNVC: 2
REVB: RNCC: 6 | RNVC: 9

25 May 1968

5110-12-391-4417
Hand Cable Stripper

123914417
907.2184: RNCC: 3 | RNVC: 2
907.2184: RNCC: 5 | RNVC: 2

12 Mar 2013

5110-21-639-5103
Firmer Gouge

216395103
MS16549-1: RNCC: 2 | RNVC: 2
330: RNCC: 3 | RNVC: 1
GGG-C-31: RNCC: 4 | RNVC: 1
81: RNCC: 5 | RNVC: 2
1F66850: RNCC: 6 | RNVC: 9
5110-0736: RNCC: 6 | RNVC: 9
REVB: RNCC: 6 | RNVC: 9

4 Jun 1968

5110-21-807-1190

5110-27-017-9149
Hand File

270179149
OZG98: RNCC: 2 | RNVC: 1
OZG98: RNCC: 5 | RNVC: 2

7 Oct 2003

5110-12-342-8614
Diagonal Cutting Pliers

123428614
8316-200 JC: RNCC: 3 | RNVC: 2
6745080: RNCC: 5 | RNVC: 2
4010886674505: RNCC: 5 | RNVC: 2

10 Apr 1997

5110-15-221-9070
Tenaglia Sauro

152219070
SAURO-250: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-120-3684

5110-15-105-5032
Metalli Scalpello

151055032
14532073: RNCC: 3 | RNVC: 2

30 May 1989

5110-15-124-9821
Scalpello

151249821
35-200: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-208-4978
Scalpello Per Mecc.

152084978
3SANMMPTZ210X19: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-857-8412
Bucksaw Blade

218578412
51: RNCC: 3 | RNVC: 1

12 Mar 1970

5110-98-205-4740
Hand Rasp

982054740
DFAMPD00187: RNCC: 2 | RNVC: 2

11 Oct 2000

5110-21-859-0070
Punch And Die Punch

218590070
730R11: RNCC: 3 | RNVC: 2

16 Apr 1970

5110-15-185-9508
Cutter Autobloccant

151859508
0-10-480: RNCC: 3 | RNVC: 2
383-0618: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-500-8569
Hand Reamer

995008569
WWS66L/WD0110-90015: RNCC: 3 | RNVC: 2
WD01-10-90015WWS66L: RNCC: 5 | RNVC: 2
XP98PB01398: RNCC: 6 | RNVC: 9

23 Feb 1998

5110-17-110-7378
Hand Reamer

171107378
P926-0,2820-0,2660: RNCC: 3 | RNVC: 2
P926: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-13-102-8920
Hand Reamer

131028920
NBN485H8-16-5CS: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-21-109-8669

5110-21-110-0754

5110-66-098-3136
Hand Cape Chisel

5110-66-013-7582
Hand Reamer

660137582
HAND REAMER: RNCC: 3 | RNVC: 1
650 4708: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-12-177-5813
Locheisen

121775813
6888-3X11: RNCC: 3 | RNVC: 9

7 Feb 1979

5110-25-120-0845

5110-99-745-0662

5110-99-135-6228

5110-15-176-0981
Lama Per Seghetto A

151760981
2740/32: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-176-0710
Lama Bimetallica

151760710
3010X27-Z4/6: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-27-019-2661
Hand File

270192661
10131ME1017: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-99-831-6847
Hand Optical Fiber Stripper

998316847
WS-4: RNCC: 3 | RNVC: 2

20 Mar 2001

5110-14-325-1887
Hand Cable Stripper

143251887
NO PRIMARY REF14-325-1887: RNCC: 3 | RNVC: 2
L67: RNCC: 5 | RNVC: 9
85-638-3310: RNCC: 6 | RNVC: 9

2 Jul 1975

5110-12-174-6327
Hand Drill

121746327
NO PRIMARY REF 12-174-6327: RNCC: 3 | RNVC: 2
10007: RNCC: 5 | RNVC: 9

17 Jul 1978

5110-21-853-6573
Bolt Cutter Jaws

218536573
112NE: RNCC: 3 | RNVC: 2
5110-0223: RNCC: 5 | RNVC: 9

22 Mar 1969

5110-99-420-9056
Ice Axe

994209056
VERTIGEMODULAR-800G-55CMLG: RNCC: 3 | RNVC: 2

6 Jan 1994

5110-14-244-0914

5110-15-232-3898
Tagliacorde

152323898
27700: RNCC: 3 | RNVC: 2
511015E078191: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-66-016-4241
Chisel And Gouge Handle

660164241
131HANDLE: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-12-139-3042

5110-12-139-2503
Hand Reamer

121392503
043M00400: RNCC: 3 | RNVC: 2
VB52791: RNCC: 5 | RNVC: 2

30 May 1969

5110-12-343-7804
Riffler

123437804
1807 152: RNCC: 3 | RNVC: 2

25 Jul 1997

5110-99-517-4874

5110-27-010-6550
Hand File

270106550
99999-NIIN-DA0014088: RNCC: 2 | RNVC: 1

21 Jun 2002

5110-99-917-0147
Hand Saw

999170147
1-20-084: RNCC: 3 | RNVC: 2
08129-001: RNCC: 6 | RNVC: 9

28 Feb 2008

5110-27-011-3956
Hand File

270113956
99999-NIIN-DA0037152: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-425-1519
File Handle

994251519
NO PRIMARY REF 99-425-1519: RNCC: 3 | RNVC: 2
7311518193386: RNCC: 5 | RNVC: 2
9-485-09-10: RNCC: 5 | RNVC: 2
020AD-009: RNCC: 6 | RNVC: 9
9-485-09-10: RNCC: 6 | RNVC: 9

30 Jan 2002

5110-21-848-1888
Hand Reamer

218481888
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
D500: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

4 Jun 1968

5110-15-144-3474
Lima Mezza Tonda A

151443474
2356GB8: RNCC: 3 | RNVC: 2
2561-1B8: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-21-105-2386

5110-99-650-2408

5110-22-121-4809

5110-66-120-4944
Hand Reamer

661204944
ADJUSTABLE REAMER: RNCC: 3 | RNVC: 1
653 0004: RNCC: 3 | RNVC: 2
MA8: RNCC: 5 | RNVC: 9

14 Jun 1984

5110-27-019-4750
Hand File

270194750
10091KEGE0053: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-236-4995
Lama

152364995
76372: RNCC: 3 | RNVC: 2
511015E104562: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-22-609-9986
Craftsman's Knife

226099986
KDH-11YE: RNCC: 3 | RNVC: 2

21 Mar 2005

5110-15-158-1647
Matrici Sx

151581647
MATRICI SX: RNCC: 2 | RNVC: 2

18 Dec 2003

5110-21-844-5329
Bearing Scraper

218445329
3696: RNCC: 3 | RNVC: 2

4 Jun 1968

5110-15-216-0098
Lima

152160098
LIMA: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-185-0768
Fustella Di Taglio

151850768
FUSTELLA DI TAGLIO: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-220-6938
Mazzuola

152206938
MAZZUOLA: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-112-5728
Dyserivalsaet

221125728
983: RNCC: 3 | RNVC: 2
842-7141-1: RNCC: 5 | RNVC: 9

12 May 1970

5110-15-171-4956
Cesoia Doppia Leva

151714956
CESOIA DOPPIA LEVA BETA ART.1122: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-122-7691
Ugnetto Da 150

151227691
ART36: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-98-103-2887

5110-66-013-5504
Hand File

660135504
911525: RNCC: 3 | RNVC: 2
R0UND4IN: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-12-379-4000
Wire Stripper Blade

123794000
12 19 180: RNCC: 3 | RNVC: 2
4003773022145: RNCC: 5 | RNVC: 2

20 Jul 2009

5110-14-490-8737
Cisaill

144908737
4065 030 000 578: RNCC: 3 | RNVC: 2
F300 0T 000 4983: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-15-237-5896
Raschietto Per Meta

152375896
1878: RNCC: 3 | RNVC: 2
511015E068459: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-14-264-4913
Hand Metal Stamping Die Set

142644913
4650-12: RNCC: 3 | RNVC: 9

1 Jan 1970

5110-25-102-7800
Double Bow Cutting Punch

251027800
2SBF5110HVK1: RNCC: 2 | RNVC: 1
221 4240: RNCC: 5 | RNVC: 2
221-4240: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-66-077-5395
Hand File

660775395
4IN SAFE EDGE FLAT BASTARD: RNCC: 3 | RNVC: 2
5110-99-910-4876: RNCC: 6 | RNVC: 9

26 Sep 1974

5110-98-205-3879
Hand File

982053879
DFAMPD00078/KNIFE: RNCC: 2 | RNVC: 2
DFAMPD00078/G: RNCC: 3 | RNVC: 2

29 Jun 2000

5110-17-101-1527
Snyapparaat

171011527
H/W-4/838D-1150BAR: RNCC: 3 | RNVC: 2
H/W-4/838D-1150BAR: RNCC: 5 | RNVC: 9

9 Dec 1986

5110-25-101-4629
Rissepipe

251014629
2MMBR: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-127-2971
Raschietto

151272971
A90313: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-165-3701
Coltello Di Salvat

151653701
85601: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-22-303-5657

5110-12-148-5996
Reamer Blade Set

121485996
NO PRIMARY REF 12-148-5996: RNCC: 3 | RNVC: 2
101430: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-104-4600

5110-98-104-4604
Therm Wire Stripper

5110-15-208-4554
Fustella Abitabile

152084554
3FATGRAI12: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-206-4672
Hand Masonry Drill

152064672
3367661: RNCC: 3 | RNVC: 2
(241)AD3493367661: RNCC: 5 | RNVC: 2

12 Jun 2012

5110-99-812-3704
Seat Facing Cutter

998123704
HB18347: RNCC: 3 | RNVC: 2
LV3RRHB18347: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-208-2611
Scalpello

152082611
3SAGMMCNZ170X27: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-41-000-5252
Knockout Punch And Die

410005252
80512: RNCC: 3 | RNVC: 2

13 Nov 2007

5110-17-123-8701
Boor

171238701
3C1885NSCMB5416: RNCC: 3 | RNVC: 2
3C1885: RNCC: 5 | RNVC: 2

9 Aug 2011

5110-12-010-5234

5110-12-129-5474

5110-12-126-2636
Hand Cold Chisel

121262636
74100-130-12: RNCC: 3 | RNVC: 2
574B004-12: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-125-3593
Forbice Media 200Mm

151253593
1784-200: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-66-039-2131
Valve Seat Cutter

660392131
144513: RNCC: 3 | RNVC: 2

23 Apr 1971

5110-12-146-8060
Diagonal Cutting Pliers

121468060
NM278: RNCC: 3 | RNVC: 2
NM278: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-146-3991
Serie Scalpelli Ste

151463991
1104: RNCC: 3 | RNVC: 2

11 Jul 1997

5110-21-893-1369
Thonging Chisel

218931369
491: RNCC: 3 | RNVC: 1

7 Aug 1983

5110-22-616-3501
Hand Cable Stripper

226163501
1558130901: RNCC: 3 | RNVC: 2

3 Jan 2008

5110-14-295-6805

5110-15-074-7583
Griffa Girabecchino

150747583
282: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-074-6198
File Holder

150746198
14INART110MEZZ0T0NDA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-490-8846
Alesoir

144908846
4067 010 001 848: RNCC: 3 | RNVC: 2
F300 0T 000 5118: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-41-001-8800
Diagonal Cutting Pliers

410018800
7439-288: RNCC: 3 | RNVC: 2

17 Jan 2012

5110-66-149-7467
Hand File

661497467
NO PRIMARY REF 66-149-7467: RNCC: 3 | RNVC: 2
00809523: RNCC: 5 | RNVC: 2

8 Apr 2003

5110-15-176-4650
Punta Ad Ago Per Sa

151764650
0715-94-151: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-99-779-0836
Hand Reamer

997790836
NO PRIMARY REF 99-779-0836: RNCC: 3 | RNVC: 2
TS528: RNCC: 5 | RNVC: 2
FJ1931-5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-883-1796
Hand File

218831796
39GP30: RNCC: 4 | RNVC: 1

27 Jan 1981

5110-99-970-8476

5110-15-137-8459
Punzoni E Scalpelli

151378459
3622/1-1: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-208-4533
Alesatore

152084533
3AARPERMDQ18-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-171-6519
Serie Scalpelli Eco

151716519
C9160: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-17-701-4768
Hand Reamer

177014768
16-75H7DIN206SS: RNCC: 2 | RNVC: 1
DIN206: RNCC: 4 | RNVC: 1

27 Apr 1970

5110-17-051-2434
Oval Cutting Punch

170512434
471200: RNCC: 3 | RNVC: 2

12 Mar 1980

5110-12-339-1969
Diagonal Cutting Pliers

123391969
7732115ESD: RNCC: 3 | RNVC: 2
4003773025122: RNCC: 5 | RNVC: 2

24 Oct 1995

5110-15-161-7782
Forbici Dritte Usag

151617782
FORBICI DRITTE USAG MOD.FRED: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-14-259-3868

5110-15-193-5260
Taglierino

151935260
D009T: RNCC: 3 | RNVC: 2
(241)AE936D009T: RNCC: 5 | RNVC: 2

27 May 2010

5110-15-126-9055
Limaserie6

151269055
ZA210: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-120-9470
Hand File

121209470
2113203: RNCC: 3 | RNVC: 2
2113-200-3: RNCC: 5 | RNVC: 2
B100X3DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-19-004-3411
Straight Trimmers Shears

190043411
091.869: RNCC: 3 | RNVC: 2
REF. 8096-140: RNCC: 5 | RNVC: 2

19 Jan 2011

5110-12-195-6326
Hand Reamer

121956326
WN50F-6: RNCC: 3 | RNVC: 2

21 Mar 1983

5110-15-232-0523
Metro Doppio Inox 2

152320523
M01 9402: RNCC: 3 | RNVC: 2
511015E076651: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-185-6545
Punteruolo In Accia

151856545
C3711/1: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-189-9980
Forbici Lung. 250Mm

151899980
017840025: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-165-4281
Pialletto Completo

151654281
5738: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-98-857-3293

5110-15-165-3714
Lima Quadra Con Man

151653714
260424: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-25-127-1149

5110-98-205-4722
Firmer Chisel

982054722
DFAMPD00093 6MM: RNCC: 2 | RNVC: 2

10 Oct 2000

5110-12-375-9326
Straight Trimmers Shears

123759326
1024.121.260: RNCC: 3 | RNVC: 2
1024/S/10IN: RNCC: 5 | RNVC: 2

22 Jul 2008

5110-12-320-8380
Pocket Knife

123208380
844500-3: RNCC: 3 | RNVC: 2
84450-3: RNCC: 3 | RNVC: 2
84450-3: RNCC: 5 | RNVC: 2
250A-11-1107: RNCC: 5 | RNVC: 2
250A-11-1107: RNCC: 5 | RNVC: 9

21 Feb 1990

5110-66-150-4166
Woodworking Butt Chisel Set

661504166
NO PRIMARY REF 66-150-4166: RNCC: 3 | RNVC: 2
02431500: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-208-4859
Cesoia

152084859
4KCYUNSX250: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-219-9201
Asta

152199201
AR51: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-4888
Pialla

152084888
5PLELUDL50X600: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-549-0989
Vine Scissors

995490989
145: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-22-126-7022
Chisel

221267022
307046: RNCC: 3 | RNVC: 2

21 Feb 2001

5110-27-012-1437
Kaporta Punta Cekti

270121437
8800 KAM: RNCC: 2 | RNVC: 1

15 Jan 2002

5110-22-610-7928
Hand Reamer

226107928
F3417MK5: RNCC: 3 | RNVC: 2

22 Jun 2005

5110-15-233-4393
Taglierina Piccola

152334393
17115K500: RNCC: 3 | RNVC: 2
511015E022286: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-13-120-5936
Oval Cutting Punch

131205936
09016O01: RNCC: 3 | RNVC: 2

8 May 2009

5110-15-208-4813
Alesatore Cilindr.T

152084813
3AAXFCFRDP3-4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-889-5042
Craftsman's Knife

218895042
C-6: RNCC: 3 | RNVC: 2

3 Apr 1982

5110-15-173-1227
Scalpello Sandvik M

151731227
1031-25: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-66-010-9112
Single Bow Cutting Punch

660109112
2868-7: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-532-7101
Craftsman's Knife

145327101
844.D: RNCC: 3 | RNVC: 2
1133950P00: RNCC: 5 | RNVC: 2

4 Dec 2002

5110-15-192-9882
Morse Ribaltabili D

151929882
3990010: RNCC: 3 | RNVC: 2
(241)AD7823990010: RNCC: 5 | RNVC: 2

31 Mar 2010

5110-15-124-0743
Pialla A Metallo Ri

151240743
5786: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-22-221-3865

5110-22-221-4458

5110-21-806-4016

5110-21-885-2608
Tool Seating And Tr

218852608
QTBIX16A: RNCC: 3 | RNVC: 2
QTB1X16A: RNCC: 3 | RNVC: 2
129-0120-060: RNCC: 5 | RNVC: 2
A0270165: RNCC: 5 | RNVC: 2

28 Jul 1981

5110-12-307-7240
Straight Trimmers Shears

123077240
DIN32608-B200-ST: RNCC: 2 | RNVC: 2
1350-20: RNCC: 3 | RNVC: 2
B200DIN32608-ST: RNCC: 5 | RNVC: 2

18 Jul 1986

5110-15-232-3543
Scalpello

152323543
531P/125: RNCC: 3 | RNVC: 2
511015E110012: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-220-4896
Tranciabulloni Mod.

152204896
UTILEX-600MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-465-8071

5110-15-208-4836
Alesatore

152084836
3AAXFCFRDP14: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-023-1939

5110-15-235-9514
Scalpello Piatto Mm

152359514
70010008: RNCC: 3 | RNVC: 2
511015E143818: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-27-011-3967
Hand File

270113967
99999-NIIN-DA0037172: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-22-601-8524
Die

226018524
HD51-114N: RNCC: 3 | RNVC: 2

30 Oct 2002

5110-25-102-9909
Hand File

251029909
14SBF5110HVK2: RNCC: 2 | RNVC: 1
FS 5110-0641 POS 11: RNCC: 2 | RNVC: 2

1 Jan 1984

5110-99-910-5301
End Cutting Nippers

999105301
UKD1SPR0V48: RNCC: 4 | RNVC: 1
FA15362: RNCC: 6 | RNVC: 9
910-5301: RNCC: 6 | RNVC: 9
1B4408: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-264-6130
Hand Masonry Drill

142646130
1112-14: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-17-701-5356
File Handle

177015356
003565: RNCC: 3 | RNVC: 2

31 Aug 1971

5110-12-391-2464
Shave Hook Scraper

123912464
25/70: RNCC: 3 | RNVC: 2

28 Feb 2013

5110-27-018-5163
Hand File

270185163
14001YP21657: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-221-4730
Hand Operated Cable Cutter

152214730
EX5110RI7422025: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-3909
Steel Strapping Cutter

151653909
206A: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-33-103-9421
Hand Operated Cable Cutter

331039421
790.280: RNCC: 3 | RNVC: 2

23 Jun 1995

5110-15-218-4662
Taglierino

152184662
5233GA: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-179-9833
Pocket Knife

121799833
TASCHENK0MBIWERKZEUG: RNCC: 3 | RNVC: 9

14 Aug 1979

5110-99-833-4104

5110-21-848-0665

5110-15-197-2547
Screw Thread Insert Breaker

151972547
PN UAS 00043303: RNCC: 3 | RNVC: 2
5110F76035617: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-15-192-1334
Curva Tubi

151921334
M775B: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-27-024-8558
Kuyumcu Makasi

270248558
12-47: RNCC: 2 | RNVC: 1

11 Dec 2004

5110-14-314-8609

5110-12-369-1711
Hand Metal Cutting Shears

123691711
D27B: RNCC: 3 | RNVC: 2
00.19.52.12: RNCC: 5 | RNVC: 2

31 May 2006

5110-15-198-4682
Hand Optical Fiber Cleaving Tool

151984682
G432002: RNCC: 3 | RNVC: 2

28 Sep 2004

5110-25-134-5964
Hand Wire Stripper

5110-25-119-9563

5110-15-199-0776
Double Bow Cutting Punch

151990776
3703-42: RNCC: 3 | RNVC: 2
C3703-42: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-21-870-0794
Hand Metal Stamping Die Set

218700794
1300: RNCC: 3 | RNVC: 1
5110-1851: RNCC: 5 | RNVC: 9

16 Aug 1973

5110-17-115-0973
Miter Box Saw

171150973
1-20-800: RNCC: 3 | RNVC: 2

9 Aug 2002

5110-15-215-7796
Tenaglia A Branche

152157796
ART.54: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-27-010-4638
Plumber's Saw Blade

270104638
07002YD0099: RNCC: 2 | RNVC: 1
DA0057098: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-27-011-7691
Hand Reamer

270117691
09013KR1055: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-074-7526
Electricians' Scissors

150747526
125ART1042: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-159-3200
Electricians' Scissors

151593200
PN UAS 00013807: RNCC: 3 | RNVC: 2
5120F76025949: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-14-298-4545
Diagonal Cutting Pliers

142984545
405-10: RNCC: 3 | RNVC: 2
3148511751206: RNCC: 5 | RNVC: 2
91490746: RNCC: 5 | RNVC: 2
0714 07 37: RNCC: 5 | RNVC: 2
91490746: RNCC: 5 | RNVC: 9
MO002004: RNCC: 6 | RNVC: 9

1 Jan 1973

5110-14-363-1522
Single Bow Cutting Punch

143631522
D4: RNCC: 3 | RNVC: 2
D4: RNCC: 5 | RNVC: 9
85-689-9241: RNCC: 6 | RNVC: 9

3 Apr 1980

5110-15-212-4960
Taglia Cerchi

152124960
05141-NAT12001: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-924-2678

5110-25-140-0952
Single Bit Ax

5110-15-192-2448
Cutter Stanley

151922448
CUTTSTANL: RNCC: 3 | RNVC: 2

2 Mar 2010

5110-15-208-8110
Lima

152088110
3LMZPNPEBSN: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-27-000-7989
Hand Cape Chisel

270007989
5010 03 0010: RNCC: 3 | RNVC: 2

7 Jun 1991

5110-15-132-7086
Tronchese A Cernier

151327086
P581G160: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-22-616-8065
Tube Cutter

226168065
02526453: RNCC: 3 | RNVC: 2

10 Mar 2008

5110-66-149-3489
Pocket Scissors

661493489
NO PRIMARY REF 66-149-3489: RNCC: 3 | RNVC: 2
576604: RNCC: 5 | RNVC: 2

3 Apr 2003

5110-23-113-7807
D 45 H7 Caliber

231137807
T813-01-75: RNCC: 3 | RNVC: 2

30 May 2003

5110-22-610-5648
Hand Metal Cutting Shears

226105648
0714-03-17: RNCC: 3 | RNVC: 2

1 Jun 2005

5110-15-208-7753
Sega Telaio Lama Mt

152087753
5NCNC01000: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-910-9990
Hand Reamer

999109990
BS122 PART 2: RNCC: 4 | RNVC: 1
BS122PT2: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9
F1FA1629: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-564-6737
Pocket Folding Multi-Tool

145646737
186399552: RNCC: 3 | RNVC: 2
3.0323.3CN.FR1: RNCC: 3 | RNVC: 2
41170101: RNCC: 5 | RNVC: 2
186399573: RNCC: 5 | RNVC: 2

25 May 2010

5110-14-274-7903
A Monture Scie

142747903
4559-80TEN0NS: RNCC: 3 | RNVC: 9

1 Jan 1971

5110-15-210-9843
Pinza Crimpatrice I

152109843
HT2008: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-3761
Lima

151653761
991A: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-237-6903
Angolare Pino Lucid

152376903
17811110: RNCC: 3 | RNVC: 2
511015E077667: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-98-105-8782

5110-27-011-5040
Hand File

270115040
10121ME0084: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-37-526-7837
Hand Wire Stripper

375267837
3000C: RNCC: 3 | RNVC: 2

30 Aug 2013

5110-21-636-4841

5110-15-175-2693
Alesatore

151752693
3AAXFCFRDP11-75: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-12-339-1971
Diagonal Cutting Pliers

123391971
7813125ESD: RNCC: 3 | RNVC: 2
4003773025153: RNCC: 5 | RNVC: 2

24 Oct 1995

5110-12-370-5987
Diagonal Cutting Pliers

123705987
7002125: RNCC: 3 | RNVC: 2
4003773034025: RNCC: 5 | RNVC: 2

28 Nov 2006

5110-17-700-9797
Firmer Gouge

177009797
1312.06: RNCC: 3 | RNVC: 2

16 May 1970

5110-14-264-4827

5110-21-109-8559

5110-66-150-3383
Hand Operated Cable Cutter

661503383
NO PRIMARY REF 66-150-3383: RNCC: 3 | RNVC: 2
00793900: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-885-1846
Cutter And Trimmer

218851846
KTJ-17: RNCC: 3 | RNVC: 2

7 Apr 1981

5110-98-205-4827
Hand Drill

982054827
DFAMPD00172 A: RNCC: 2 | RNVC: 2

18 Oct 2000

5110-21-807-1002
Hand Metal Stamping Die Set

218071002
101: RNCC: 3 | RNVC: 1
GGGD280: RNCC: 4 | RNVC: 1
1F141350: RNCC: 6 | RNVC: 9
313417: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-99-978-1141
Wire Cutter Blade

999781141
95955: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-15-132-5230
Sgorbia Manicata -

151325230
5235G6-6: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-33-208-8762
Hand Drill

332088762
2208-0: RNCC: 3 | RNVC: 2

8 Apr 2011

5110-15-218-6426
Lima Per Alluminio

152186426
416NA-3,5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-551-7745
Enclosed Blade Tube Deburring Tool

145517745
221250: RNCC: 3 | RNVC: 2
2212 542: RNCC: 5 | RNVC: 2

23 Oct 2006

5110-12-129-1360
Hand Reamer

121291360
6: RNCC: 3 | RNVC: 2

30 May 1969

5110-99-724-9072
Hand Reamer

997249072
A03980AAR: RNCC: 3 | RNVC: 2
1MEVDTD: RNCC: 6 | RNVC: 9

1 Apr 2003

5110-15-165-3844
Lima Per Meccanica

151653844
2562312: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-22-303-3671

5110-15-165-3646
Lime Ad Ago Serie

151653646
34582: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-137-9828
Lime Per Contatti

151379828
1721010: RNCC: 3 | RNVC: 2
1721XB6: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-208-4881
Pialla

152084881
5PFECHRE41X175: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-371-5280
Craftsman's Knife

123715280
445: RNCC: 3 | RNVC: 2
00.21.58.24: RNCC: 5 | RNVC: 2
445.02: RNCC: 5 | RNVC: 2

13 Apr 2007

5110-15-172-7971
Tagliatubi Ega Masi

151727971
TAGLIATUBI EGA MASIER MOD.GAR 22: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-165-3837
Lima Per Meccanica

151653837
2562110: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-13-116-4911
Hand Operated Cable Cutter

131164911
N30S/98970: RNCC: 3 | RNVC: 2
N30S/98985: RNCC: 3 | RNVC: 2

4 Apr 1997

5110-99-910-6468
Hand Metal Stamping Die Set

999106468
01026087: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H2603: RNCC: 6 | RNVC: 9
H2603: RNCC: 6 | RNVC: 9
H2603: RNCC: 6 | RNVC: 9
1C3244: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-045-2406
Hand File

270452406
J55-308H: RNCC: 2 | RNVC: 1

17 Apr 2009

5110-99-910-4238
Firmer Chisel

999104238
DEF STAN 51-11:PART 27-H423: RNCC: 2 | RNVC: 2
H423: RNCC: 3 | RNVC: 2
DEF STAN 51-11:PART 27: RNCC: 5 | RNVC: 2
H423: RNCC: 6 | RNVC: 9
FA11325: RNCC: 6 | RNVC: 9
910-4238: RNCC: 6 | RNVC: 9
1A417: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-155-9371
Single Bit Ax

121559371
NM310: RNCC: 3 | RNVC: 2
NM310: RNCC: 5 | RNVC: 9

30 May 1969

5110-16-006-6863
Hand Hacksaw Frame

160066863
22 2956: RNCC: 3 | RNVC: 2
391239152210: RNCC: 6 | RNVC: 9

23 Aug 2011

5110-21-910-0385
Block Plane

219100385
10P65.01: RNCC: 3 | RNVC: 2

6 Nov 1992

5110-21-843-5291
Hand Reamer

218435291
382964: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-98-104-4976

5110-98-854-9345
Diamond Poin Chisel

5110-27-029-6932
Diagonal Cutting Pliers

270296932
7002160: RNCC: 2 | RNVC: 1

2 May 2006

5110-21-637-6868
Hand Reamer

216376868
353H: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-17-007-8643
Hand Metal Stamping Die

170078643
H02890-103: RNCC: 3 | RNVC: 2

17 Jun 1972

5110-17-701-5741
Hand File

177015741
NO PRIMARY REF 17-701-5741: RNCC: 3 | RNVC: 2

14 May 1970

5110-27-040-1807
Hand File

270401807
1O" BALIK SIRTI: RNCC: 2 | RNVC: 1

10 Jan 2008

5110-99-122-7456

5110-21-639-4823
File Handle

216394823
1: RNCC: 3 | RNVC: 2
ETF111: RNCC: 3 | RNVC: 2
921485: RNCC: 5 | RNVC: 2
50FH: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-15-165-4228
Punzone In Mzw Da 6

151654228
0810060: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-66-010-9110
Single Bow Cutting Punch

660109110
27177: RNCC: 3 | RNVC: 2
2871-6: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-21-105-2147
Punch And Die Punch

211052147
2: RNCC: 3 | RNVC: 1
300080469: RNCC: 3 | RNVC: 2
1F54: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-15-220-1910
Aprichiusini Kit

152201910
T4Y+S: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-16-006-1653
Hand File

160061653
286211503035: RNCC: 3 | RNVC: 2
8595055900662: RNCC: 5 | RNVC: 2
PZT 300/3: RNCC: 5 | RNVC: 2

9 Dec 2008

5110-13-102-8796
Hand File

131028796
D0C84-3: RNCC: 3 | RNVC: 2

31 Mar 1977

5110-15-210-1786
Alesatore A Manicot

152101786
60MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-144-4858
Isolata 1 Tronchese

151444858
582G: RNCC: 3 | RNVC: 2
P581G130: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-15-208-2649
Alesatore

152082649
3AAWFCCNFQ27-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-210-6537
Estrattore X Filett

152106537
512302: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-199-0976
Gimlet

151990976
1378-4: RNCC: 3 | RNVC: 2

12 Jan 2005

5110-27-011-5025
Hand File

270115025
10121ME0054: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-15-208-5353
Tronchese

152085353
3TAGFZDLCNN160: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-150-1498
Hand Rasp

661501498
NO PRIMARY REF 66-150-1498: RNCC: 3 | RNVC: 2
07155602: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-13-120-7710
Knife Blade Handle

131207710
NB1000: RNCC: 3 | RNVC: 2
56050: RNCC: 5 | RNVC: 2
NG-1: RNCC: 5 | RNVC: 2
NG1000: RNCC: 5 | RNVC: 2
1775910: RNCC: 5 | RNVC: 2
400-8626: RNCC: 5 | RNVC: 2

17 Feb 2010

5110-21-886-6820
Notched Blade Knife

218866820
K-422-065: RNCC: 3 | RNVC: 2
67860: RNCC: 5 | RNVC: 2

21 Sep 1981

5110-15-199-0781
Double Bow Cutting Punch

151990781
3703-47: RNCC: 3 | RNVC: 2
C3703-47: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-22-180-1624

5110-66-076-9584

5110-21-865-8230
Cutter And Cr Blade

218658230
L4211: RNCC: 3 | RNVC: 2

14 Apr 1972

5110-25-142-7594
Hand File Set

5110-14-244-3684

5110-99-427-9156

5110-25-128-9263
Hullsag

5110-27-021-0918
Hand File

270210918
6Q380346: RNCC: 2 | RNVC: 1

15 Dec 2003

5110-27-055-9682
Hand File

270559682
PLF 08: RNCC: 2 | RNVC: 1
ESAS PLF 08: RNCC: 2 | RNVC: 1

18 Jan 2012

5110-12-181-8030
Hand Cold Chisel

121818030
730-7: RNCC: 3 | RNVC: 2

17 Dec 1979

5110-99-120-2178
Hand Reamer

991202178
BS3088: RNCC: 4 | RNVC: 1
H20736: RNCC: 5 | RNVC: 2
H1: RNCC: 5 | RNVC: 2
DEFSTAN51-9: RNCC: 6 | RNVC: 9
0275-16535: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-105-2136
Punch And Die Punch

211052136
2: RNCC: 3 | RNVC: 1
300080297: RNCC: 3 | RNVC: 2
1F42: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-27-045-1600
Tailor's Shears

270451600
DA0086981: RNCC: 2 | RNVC: 1

10 Apr 2009

5110-15-213-8471
Lima A Triangolo Pe

152138471
4-202-85-2-0: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-215-4019
Inserto A Croce

152154019
390CPH04: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-210-2089
Scalpello A Punta P

152102089
9961: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-191-6804
Utensile A Svasare

151916804
757/4-2/5: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-232-8946
Tronchese A Leva

152328946
554/900: RNCC: 3 | RNVC: 2
511015E109123: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-14-287-8391
Hand Metal Stamping Die

142878391
NT92-01JUIN51P0INC0N1-3MM: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-287-8391: RNCC: 3 | RNVC: 2
NT92-01JUIN51P0INC0N1-3MM: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-27-018-7894
Hand File

270187894
09013KE1009: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-004-9342
Taglierino Per Fibr

150049342
CS30W: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-14-533-7248
Fireman's Strap Cutting Knife

145337248
303684-0: RNCC: 3 | RNVC: 2

19 Feb 2003

5110-15-230-5951
Troncabulloni

152305951
1101/750: RNCC: 3 | RNVC: 2
511015E154609: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-99-138-6691

5110-14-245-9089
Decoupejoint Specia

142459089
DEC0UPE J0INT LISSE 20MM: RNCC: 3 | RNVC: 2
0808230: RNCC: 3 | RNVC: 2
245T20: RNCC: 5 | RNVC: 2
245.T20: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-99-136-6650
Jointer Plane

991366650
07: RNCC: 3 | RNVC: 2
BS3623: RNCC: 4 | RNVC: 1
H6851: RNCC: 6 | RNVC: 9
1K274: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-021-7966
Maket Bicak

270217966
BICAK: RNCC: 2 | RNVC: 1

29 Dec 2003

5110-15-137-4817
Per Capicorda Pinza

151374817
K203G: RNCC: 3 | RNVC: 2
K203G: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-99-127-8762
Glass Cutter

991278762
2360KARB0: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-15-165-3712
Lima Tonda Con Mani

151653712
260224: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-264-9036

5110-22-614-2813
Firmer Chisel

226142813
1031-20: RNCC: 3 | RNVC: 2
504440020: RNCC: 5 | RNVC: 2

17 Oct 2006

5110-25-119-9571

5110-98-207-5048
Single Bit Ax Handle

982075048
RT AHAND1: RNCC: 3 | RNVC: 2

18 Jul 2011

5110-15-145-8898
Lima Marca Uboldi N

151458898
3925: RNCC: 3 | RNVC: 2

11 Jul 1997

5110-66-017-2229
Hollow Punch

660172229
1900 1-2IN: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-394-4105

5110-17-109-8258
Zak Mes

5110-99-445-2920

5110-99-545-4677
Sheet Metal Cutter

5110-15-184-7056
Raspa

151847056
3RFLT0CNBSN355-6: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-13-119-7027
Craftsman's Knife

131197027
BR820: RNCC: 3 | RNVC: 2
25.3.BR820.20: RNCC: 5 | RNVC: 2

22 Dec 2006

5110-12-155-9062
Rip Hand Saw

121559062
NM311: RNCC: 3 | RNVC: 2
NM311: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-268-6327

5110-99-212-4233
Eye Distance Strip

992124233
MC1275054: RNCC: 3 | RNVC: 2

20 May 2002

5110-27-041-5272
Pliers

270415272
01050201207: RNCC: 2 | RNVC: 1
01050201207: RNCC: 5 | RNVC: 9

30 May 2008

5110-14-475-0526
End Cutting Nippers

144750526
191A22EL: RNCC: 3 | RNVC: 2
3148511443101: RNCC: 5 | RNVC: 2
SYQ5654: RNCC: 5 | RNVC: 2

16 Mar 1995

5110-98-205-8797
Hand File

982058797
LP1850-3-2: RNCC: 3 | RNVC: 2

12 May 2003

Load More Results