What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 88 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 88of 112

5110-21-639-4567
Hand File

216394567
NO PRIMARY REF 21-639-4567: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-12-126-1467
Hand Reamer

121261467
NO PRIMARY REF 12-126-1467: RNCC: 3 | RNVC: 2
30DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-024-9702
Hand File

270249702
00120103: RNCC: 2 | RNVC: 1

22 Dec 2004

5110-15-221-5354
Disco Acciaio X Tag

152215354
DISC0ACCIAI0MM300: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-217-5486
Scalpelli A Punta

152175486
EXRI7905133: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-27-014-8926
Hand Reamer

270148926
3455ATF16401: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-15-165-3648
Lima Triangolare Ta

151653648
25643D10: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-126-1764

5110-13-102-8945
Hand Reamer

131028945
A175-2M0RSEAFSTR: RNCC: 3 | RNVC: 9
LETIGRE7310-2: RNCC: 5 | RNVC: 2

1 Apr 1975

5110-99-151-0288

5110-99-874-6267
Hand Operated Cable Cutter

998746267
NO PRIMARY REF 99-874-6267: RNCC: 3 | RNVC: 2
621-629: RNCC: 5 | RNVC: 2
04391058: RNCC: 5 | RNVC: 2

3 Nov 1999

5110-21-105-2123
Punch And Die Punch

211052123
2-3/32: RNCC: 3 | RNVC: 1
2: RNCC: 3 | RNVC: 1
300080094: RNCC: 3 | RNVC: 2
1F29: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-12-135-2992
Hand Reamer

121352992
838-52: RNCC: 3 | RNVC: 2
513G003-52: RNCC: 3 | RNVC: 2

30 May 1969

5110-99-978-1906
Nut Splitter

999781906
NS1: RNCC: 3 | RNVC: 2
NS1: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-22-221-4093
Hand Hacksaw Frame

222214093
90 12 10: RNCC: 3 | RNVC: 2
5701604012103: RNCC: 5 | RNVC: 2
72-2035-6: RNCC: 6 | RNVC: 9

15 Dec 1972

5110-15-217-6309
Frattasso Gomma Piu

152176309
FRATTASSO21/15: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-17-015-5876
Hand File

170155876
TVA5110-2-263-005-1.1.9: RNCC: 3 | RNVC: 2
003614: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
12100603: RNCC: 5 | RNVC: 2
F1FA13376: RNCC: 6 | RNVC: 9

17 Jun 1972

5110-12-126-2482
Kommutatorsa Blatt

121262482
NO PRIMARY REF 12-126-2482: RNCC: 3 | RNVC: 2
686246-0-65MM: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-666-9821
Saw Blade

996669821
TL-502-865: RNCC: 3 | RNVC: 2

28 Nov 2007

5110-15-208-3786
Alesatore

152083786
3AAXFCFRDP6-8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-865-8941
Miter Box Saw

218658941
4: RNCC: 3 | RNVC: 1

19 May 1972

5110-12-373-3949
Compass Saw Blade

123733949
2608656042: RNCC: 3 | RNVC: 2

29 Oct 2007

5110-15-191-2294
Madrevite Per Tubi

151912294
EX5110RN0650510: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-14-544-7953
Diagonal Cutting Pliers

145447953
391.16VE: RNCC: 3 | RNVC: 2

24 Feb 2005

5110-22-610-5067
Hand File

226105067
1-160-08-2-3: RNCC: 3 | RNVC: 2

27 May 2005

5110-99-215-4209
File Handle

992154209
NO PRIMARY REF 99-215-4209: RNCC: 3 | RNVC: 2
7311518193379: RNCC: 5 | RNVC: 2
9-485-13-1P: RNCC: 5 | RNVC: 2
020AO-007: RNCC: 6 | RNVC: 9

30 Jan 2002

5110-12-167-6912
Hand File

121676912
DIN7261-G150-1: RNCC: 2 | RNVC: 2
DIN7261G150-1: RNCC: 5 | RNVC: 9
G150-1DIN7261: RNCC: 5 | RNVC: 9

12 Jan 1977

5110-25-103-4252
Hand Drill

251034252
103: RNCC: 3 | RNVC: 2
0324-0207: RNCC: 5 | RNVC: 2
206060-4: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-136-0422
Tronchese

151360422
1816-1-130: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-22-623-5915
Hand File

226235915
21-293: RNCC: 3 | RNVC: 2

14 Feb 2012

5110-21-105-1221
Hand File

211051221
39GP53: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-14-351-7957

5110-12-318-2714
Hand Cable Stripper

123182714
CYVB: RNCC: 3 | RNVC: 2
2501: RNCC: 5 | RNVC: 2
COREX CYVB: RNCC: 5 | RNVC: 2
2501: RNCC: 5 | RNVC: 2

26 Jun 1989

5110-12-338-1968
Diagonal Cutting Pliers

123381968
7405140: RNCC: 3 | RNVC: 2
5/LTT 237 02: RNCC: 5 | RNVC: 1
7402140: RNCC: 5 | RNVC: 2
00.12.59.95: RNCC: 5 | RNVC: 2
4003773042419: RNCC: 5 | RNVC: 2

2 Jun 1995

5110-21-893-1050
Hand Reamer

218931050
18-10010: RNCC: 3 | RNVC: 2
4600: RNCC: 5 | RNVC: 1

14 May 1983

5110-14-332-7405
Hand Cable Stripper

143327405
MS3191-11: RNCC: 3 | RNVC: 2

2 Jul 1975

5110-99-355-4400
Nozzle Pliers

993554400
379366: RNCC: 3 | RNVC: 2
WKAT-379366: RNCC: 5 | RNVC: 2
052J3-030: RNCC: 6 | RNVC: 9

21 Jul 2005

5110-14-574-3846
Hand File

145743846
TRI-D200+MAN2: RNCC: 3 | RNVC: 2

15 Jan 2013

5110-15-184-6134
Raschietto

151846134
3ZFEFLTVM55: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-27-016-0668
Diagonal Cutting Pliers

270160668
10131KP0136: RNCC: 2 | RNVC: 1
3860150180: RNCC: 2 | RNVC: 1
3860150180: RNCC: 5 | RNVC: 9

17 Dec 2002

5110-27-011-7677
Hand Reamer

270117677
09013KR1081: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-213-3616
Lama Per Sega 21' 5

152133616
23-21: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-857-8318
Scraper Blade

218578318
W2 1-2B: RNCC: 3 | RNVC: 2
CW-2-1/2-B: RNCC: 5 | RNVC: 2

12 Feb 1970

5110-37-180-1104
Woodworking Butt Chisel

371801104
KS-B-3602: RNCC: 2 | RNVC: 2
ROK MIL SPEC 5180-0001: RNCC: 2 | RNVC: 2
KSB3602: RNCC: 3 | RNVC: 2
5110-97-180-1104: RNCC: 5 | RNVC: 9

12 Sep 1989

5110-19-004-3516
Hand File

190043516
8AT-9105-10-7: RNCC: 3 | RNVC: 2

26 Jan 2011

5110-22-285-2755
Tool For Split Rive

222852755
275.95.14.00: RNCC: 3 | RNVC: 2

16 Apr 2002

5110-99-347-5608
Cutter

993475608
024959: RNCC: 3 | RNVC: 2
1391571: RNCC: 5 | RNVC: 2

20 Nov 2013

5110-21-892-1808
Uphols Cutting Tool

218921808
3100070: RNCC: 3 | RNVC: 2

20 Feb 1983

5110-25-150-2667
Cleaningneed Holder

251502667
20885: RNCC: 3 | RNVC: 2

21 Feb 1997

5110-98-202-2113
Hand Reamer Set

982022113
NZCES 405: RNCC: 3 | RNVC: 2

13 May 1988

5110-99-136-9858

5110-33-190-2485

5110-33-190-2395

5110-15-123-2648
Tronchese Con Tagli

151232648
2085-200: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-512-1980
Pipe Cutter

995121980
NO PRIMARY REF 99-512-1980: RNCC: 3 | RNVC: 2
206-3485: RNCC: 5 | RNVC: 2

4 May 2011

5110-14-391-2870
Machoire

143912870
ESP1323M11-29: RNCC: 3 | RNVC: 2
ESP1341M11-29: RNCC: 3 | RNVC: 2

1 Mar 1984

5110-14-375-0964
Grattoir A Plaquett

143750964
GM25: RNCC: 3 | RNVC: 2

30 Jan 1982

5110-99-465-6935
Wood Turning Tool

994656935
1C5286: RNCC: 3 | RNVC: 2

29 Jan 1980

5110-15-213-8497
Scalpello X Legno D

152138497
016253: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-828-9803
Hand Reamer

998289803
18G1R55-1: RNCC: 3 | RNVC: 2
18G1255: RNCC: 5 | RNVC: 1

25 Apr 1991

5110-15-123-6555
Curvatubi Per Tubi

151236555
2505/8: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-66-120-5138
Turning Chisel

661205138
M986 1/2 IN.: RNCC: 3 | RNVC: 2
7600112: RNCC: 3 | RNVC: 2

16 Jun 1984

5110-98-205-6470
Hand File

982056470
DFAMPD00101 G: RNCC: 2 | RNVC: 2

27 Jun 2001

5110-22-610-1197
Hand File

226101197
168-8-5.2-1P: RNCC: 3 | RNVC: 2

8 Apr 2005

5110-15-126-1468
Serie Stampi Trafor

151261468
3679-1-70: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-22-221-4111
Glass Cutter

222214111
DIAMANT,M/SKAFT,STAALHOLDER: RNCC: 3 | RNVC: 2

15 Dec 1972

5110-14-475-9774
Hand Metal Stamping Die Set

144759774
400238: RNCC: 3 | RNVC: 2

17 May 1995

5110-15-137-9551
Pinza Spelafili

151379551
1142026: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-120-5203
Hand Rasp

121205203
DIN7263-C300-1: RNCC: 2 | RNVC: 2
19138-300-1: RNCC: 3 | RNVC: 2
1552301: RNCC: 3 | RNVC: 2
1552-300-1: RNCC: 3 | RNVC: 2
C300-1DIN7263: RNCC: 5 | RNVC: 2
1552-250-2: RNCC: 5 | RNVC: 9
B300X1DIN8334R: RNCC: 5 | RNVC: 9
DIN7263C300-1: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-385-2471
Oval Cutting Punch

123852471
50.000.185: RNCC: 3 | RNVC: 2

12 May 2011

5110-66-098-3148
Bolt Cutter

660983148
CJ36: RNCC: 3 | RNVC: 2
390MA: RNCC: 3 | RNVC: 2

28 Jul 1978

5110-15-182-8998
Kit Intestazione Fi

151828998
RT29367: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-836-0454

5110-12-127-0559
Bucksaw

121270559
NO PRIMARY REF 12-127-0559: RNCC: 3 | RNVC: 2
GW12300-600: RNCC: 5 | RNVC: 9
65-600: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-849-8069
Hand File

218498069
39GP30: RNCC: 4 | RNVC: 1
5110-0624: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-184-7319
Ferro Semplice Per

151847319
3IANSRSE45: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-170-3873
Hand File

121703873
A375X2DIN8335: RNCC: 2 | RNVC: 9

8 Jul 1977

5110-14-215-0219

5110-99-495-3566
Calibration Cylinde

994953566
MC1278064: RNCC: 3 | RNVC: 2

17 May 2002

5110-98-205-5569
Hand File

982055569
DFAMPD00101 F: RNCC: 2 | RNVC: 2

3 Apr 2001

5110-15-165-3738
Raspe Mod. Usag 990

151653738
990A: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4206
Tronchese

151654206
539019: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-899-4885
Tube Seal

218994885
R25948-16: RNCC: 3 | RNVC: 2

4 Sep 1985

5110-27-010-4636
Plumber's Saw Blade

270104636
07002YD0057: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-22-615-8840
Craftsman's Knife

226158840
0735891: RNCC: 3 | RNVC: 2

1 Oct 2007

5110-98-105-8740
Hand Reamer

981058740
NO PRIMARY REF 98-105-8740: RNCC: 3 | RNVC: 2
METRIC 2003-2.5MM: RNCC: 5 | RNVC: 2

30 May 1978

5110-15-218-8436
Tronchesina Taglio

152188436
E66: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-4733
Alesatore

152084733
3AARFCFRDP23: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-210-6910

5110-12-126-2000
Hand Reamer

121262000
NO PRIMARY REF 12-126-2000: RNCC: 3 | RNVC: 2
27DIN859SCHNELLARBEITSSTAHL: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-214-2685
Manico Per Martello

152142685
MANICOMARTELLO: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-184-7335
Ascia

151847335
NSN511015R557230: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-137-8572
Tagliavetro Con Tes

151378572
6126/5: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-21-872-1415
Electricians' Scissors

218721415
175E: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

19 May 1976

5110-25-102-7712
Hand Reamer Set

251027712
11K0MP: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-17-025-7664
Hand File

170257664
3721: RNCC: 3 | RNVC: 2

15 May 1970

5110-15-101-0058
Pliers

151010058
114NT145: RNCC: 3 | RNVC: 2

11 Feb 1987

5110-12-126-1478
Hand Reamer

121261478
DIN206-B8-HSS: RNCC: 2 | RNVC: 2
301-B8: RNCC: 3 | RNVC: 2
8DIN206SSSPIRALGENUTET: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-144-6801
Succhiello 980E Mm.

151446801
980005: RNCC: 3 | RNVC: 2
980E: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-12-341-7215
End Cutting Nippers

123417215
3785-3: RNCC: 3 | RNVC: 2

18 Oct 1996

5110-12-174-4353
Hand Masonry Drill Holder

121744353
2660A: RNCC: 3 | RNVC: 9
54681101: RNCC: 3 | RNVC: 9

29 Jun 1978

5110-13-104-4754
Adz Hammer Type Hd

5110-15-124-9822
Ugnetti

151249822
37-150: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-554-3229
Hand Reamer

995543229
BS328 PART 4: RNCC: 3 | RNVC: 1
B100: RNCC: 3 | RNVC: 1
B100 7/32IN.: RNCC: 5 | RNVC: 2

17 Mar 1999

5110-32-086-9726
Chain Drill Attachment

320869726
NO PRIMARY REF 32-086-9726: RNCC: 3 | RNVC: 2
202001 439: RNCC: 5 | RNVC: 2
202001 439: RNCC: 5 | RNVC: 2

23 Oct 2012

5110-66-060-8773
File Holder

660608773
21-107C: RNCC: 3 | RNVC: 2

12 Oct 1973

5110-12-371-7259
Hand Metal Stamping Die

123717259
80996060546: RNCC: 3 | RNVC: 2
80.99606-0546: RNCC: 5 | RNVC: 2

9 May 2007

5110-15-213-0282
Punzoni Numerici Da

152130282
547-492: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-865-5004
Crankcase An Reamer

998655004
NO PRIMARY REF 99-865-5004: RNCC: 3 | RNVC: 2
RE17965: RNCC: 5 | RNVC: 2
FV143203: RNCC: 5 | RNVC: 2
LV10FV143203: RNCC: 6 | RNVC: 9

17 Jan 1990

5110-99-858-5751
Sheet Metal Ripping Cutter

998585751
TL-501-435: RNCC: 3 | RNVC: 2
TL-501-435: RNCC: 3 | RNVC: 9

28 Oct 2008

5110-12-381-9139
Tube Cutter

123819139
60-000-12: RNCC: 3 | RNVC: 2

16 Apr 2010

5110-98-105-8765
Hand Reamer

981058765
NO PRIMARY REF 98-105-8765: RNCC: 3 | RNVC: 2
METRIC 2003-14MM: RNCC: 5 | RNVC: 2

30 May 1978

5110-12-130-9034

5110-12-126-2387

5110-14-351-7956

5110-12-370-9087
Reamer Blade Set

123709087
110 10 400: RNCC: 3 | RNVC: 2

16 Jan 2007

5110-25-143-0962
Hand Cable Stripper

5110-13-108-0886
Craftsman's Knife

131080886
643-4510: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-21-889-5929
Knockout Punch

218895929
AV-441: RNCC: 3 | RNVC: 2
441AV: RNCC: 5 | RNVC: 2
AV441: RNCC: 5 | RNVC: 2

29 Jul 1982

5110-15-136-1221
Apparecchiatura Per

151361221
3660-03: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-98-107-5968
Hand File

981075968
4100604: RNCC: 3 | RNVC: 2
3703902: RNCC: 3 | RNVC: 2
200MM,MILSAW,BASTARD: RNCC: 5 | RNVC: 9

4 Nov 1983

5110-15-136-5703
Rotella Tagliente

151365703
4485MR: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-98-107-7122
Hand Reamer

981077122
PARALLEL19/64X2X4IN.: RNCC: 3 | RNVC: 2

7 Feb 1984

5110-21-849-9092
Coping Saw

218499092
47: RNCC: 3 | RNVC: 1
5110-1031: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-12-331-9243
Hand Cold Chisel

123319243
100/4: RNCC: 3 | RNVC: 2
70010004: RNCC: 5 | RNVC: 2

7 Jul 1993

5110-27-007-3827
Hand File

270073827
10.0.8: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-14-274-0707
Appareil A Rainurer

142740707
U1134F9GM: RNCC: 2 | RNVC: 2
90007002: RNCC: 3 | RNVC: 2
12A42MM: RNCC: 5 | RNVC: 9

1 Jan 1971

5110-14-244-3699

5110-66-010-8523
Poppet Valve Reamer

5110-37-555-7899

5110-22-617-0116
Blacksmith's Chisel

226170116
3380-18: RNCC: 3 | RNVC: 2

22 Apr 2008

5110-99-910-4995
Hand File

999104995
C00RDPATH4025: RNCC: 3 | RNVC: 2
1A2844: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-20-007-6780
Scraper Blade

200076780
1209: RNCC: 3 | RNVC: 2

28 May 2013

5110-17-015-4142
Chisel Bar

170154142
NO PRIMARY REF 17-015-4142: RNCC: 3 | RNVC: 2

17 Jun 1972

5110-25-119-9134

5110-25-119-9133
Diagonal Cut Pliers

5110-15-141-4760
Cesoia Sn

151414760
694401270: RNCC: 3 | RNVC: 2

9 Jun 1997

5110-14-233-4385

5110-12-133-3219

5110-21-899-4797
Dimpling Punch

218994797
ZT2065-#8: RNCC: 3 | RNVC: 2
ZT2065-8: RNCC: 5 | RNVC: 2

12 Aug 1985

5110-22-304-0244

5110-12-151-3222
Ven Schneideinsatz

121513222
217.64.230STAHL4/30: RNCC: 3 | RNVC: 2
21764230: RNCC: 5 | RNVC: 9
300-24: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-841-0458
Pocket Folding Multi-Tool

998410458
8-370-05022: RNCC: 3 | RNVC: 2

7 Dec 2010

5110-14-282-8383

5110-14-469-1881
Outil De Rectificat

144691881
DLP780115: RNCC: 3 | RNVC: 2
RAB3215: RNCC: 5 | RNVC: 2

13 Apr 1994

5110-14-491-9172
Scie

144919172
301: RNCC: 3 | RNVC: 2
F300 0T 006 0587: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-15-217-6401
Lima

152176401
LIMA-: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-025-0681

5110-99-924-2809
Ship Scraper

999242809
13523: RNCC: 3 | RNVC: 2
0276-13523: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4146
Instrument Broach

999104146
DEF1198-H268: RNCC: 2 | RNVC: 2
DEF1198: RNCC: 5 | RNVC: 2
H268: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-125-2722

5110-21-849-8222
Double Bit Ax Handle

218498222
550: RNCC: 3 | RNVC: 2
5110-0761: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-15-002-4739
Reamer

150024739
34004 01 2492: RNCC: 3 | RNVC: 2

29 Aug 2013

5110-21-639-4120
Hand File

216394120
39GP30: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-99-469-7765

5110-15-202-5829
Single Bow Cutting Punch

152025829
T01-3810450: RNCC: 3 | RNVC: 2

16 May 2007

5110-14-512-0024
Hand Cable Stripper

145120024
22-395-139: RNCC: 3 | RNVC: 2

2 Feb 1999

5110-21-809-1606

5110-15-230-4191
Scalpello Per Legno

152304191
6050/2-6: RNCC: 3 | RNVC: 2
511015E090640: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-21-639-4423
Hand File

216394423
39GP30: RNCC: 4 | RNVC: 1
5110-0411: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-98-105-8804

5110-99-616-7490
Embroidery Scissors

5110-17-700-9912
Firmer Chisel

177009912
1111.06: RNCC: 3 | RNVC: 2
795-485-2: RNCC: 3 | RNVC: 2

14 May 1970

5110-12-190-1374
Hand File

121901374
DIN7261-A400-2: RNCC: 2 | RNVC: 2
3112402: RNCC: 3 | RNVC: 2
1112-400-2: RNCC: 3 | RNVC: 2
A400-2DIN7261: RNCC: 5 | RNVC: 2
DIN7261A400-2: RNCC: 5 | RNVC: 9

9 Nov 1981

5110-21-639-4471

5110-21-639-5588

5110-21-639-5581

5110-14-400-6249
Pliers

144006249
FE500046639: RNCC: 3 | RNVC: 2
TH109: RNCC: 5 | RNVC: 2

8 May 1985

5110-15-237-7974
Forbici Per Elettri

152377974
MISTRAL: RNCC: 3 | RNVC: 2

27 Aug 2007

5110-99-657-6544

5110-99-541-4165
Hand Stencil Cutting Die Set

995414165
STAMPSSTEELF1G0T09-20MMH1GH: RNCC: 3 | RNVC: 2
AS600837: RNCC: 5 | RNVC: 1

25 Apr 1991

5110-22-303-8656

5110-27-028-4884
Hand File

270284884
NF1612: RNCC: 2 | RNVC: 1
NF1612: RNCC: 2 | RNVC: 1

4 Jan 2006

5110-15-215-0803
Cutter

152150803
TK205: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-199-0737
Double Bow Cutting Punch

151990737
3703-3: RNCC: 3 | RNVC: 2
C3703-3: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-21-105-1696
Scraping Knife

211051696
K30: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-27-019-4744
Hand File

270194744
10091KEGE0040: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-27-019-4786
Hand File

270194786
10091KEGE0064: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-165-3855
Cesoia Per Cavi

151653855
71505: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-171-2511
Hand- Fraeser

121712511
VG95211-ML-121712511: RNCC: 2 | RNVC: 2
105-31821W4-020.01: RNCC: 3 | RNVC: 2
105-31821W4-020-01: RNCC: 5 | RNVC: 2

21 Sep 1977

5110-25-101-9333
Singl Cutting Punch

5110-25-106-8451
Cutter Retainer

5110-21-883-1644

5110-17-117-8728
Craftsman's Knife

171178728
PMES,SNIJ,V/ALU ZAK,GILL-MUN: RNCC: 3 | RNVC: 2

22 Aug 2005

5110-99-942-0015
Hand Reamer

999420015
BS122PT2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
5/8" PARALELL HAND REAMER: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-176-8358
Hand Reamer

121768358
DIN206-B20-HSS: RNCC: 2 | RNVC: 2
301-FORM B-20: RNCC: 3 | RNVC: 2
F1131-20: RNCC: 3 | RNVC: 2
7586C20: RNCC: 5 | RNVC: 9
536C20: RNCC: 5 | RNVC: 9
B20DIN206HSS: RNCC: 5 | RNVC: 9
13010-20: RNCC: 5 | RNVC: 9

20 Dec 1978

5110-17-110-7352
Hand Reamer

171107352
P926-0,1440-0,1310: RNCC: 3 | RNVC: 2
P926-: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-15-174-8646
Taglierina F.O.

151748646
7023 4 009-00: RNCC: 3 | RNVC: 2

17 Oct 2003

5110-12-131-4717
Hand Reamer

121314717
141.08.000: RNCC: 3 | RNVC: 2
141-08-000: RNCC: 5 | RNVC: 2
200-37HC: RNCC: 5 | RNVC: 9
V8-9-9-5HARTCHR0M: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-1504
Hand Reamer

121261504
NO PRIMARY REF 12-126-1504: RNCC: 3 | RNVC: 2
12-5DIN206SS: RNCC: 5 | RNVC: 9
DIN206-A12-5-HSS: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-013-7604
Hand Reamer

660137604
HAND REAMER: RNCC: 3 | RNVC: 1
650 5008: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-99-136-4046
Rabbet Plane

5110-14-318-2586
Diagonal Cutting Pliers

143182586
406: RNCC: 3 | RNVC: 2

1 Jan 1975

5110-15-165-3848
Lima Per Meccanica

151653848
256418: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-445-3286
Punch

994453286
N017: RNCC: 3 | RNVC: 2
W3WX33323: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-122-5940
Ruimerset

171225940
387657: RNCC: 3 | RNVC: 2

22 Oct 2009

5110-15-217-8085
Butteruolo

152178085
ST-2345: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-135-6231

5110-15-205-4423
Electricians' Scissors

152054423
BM 1310: RNCC: 3 | RNVC: 2
(241)A9260BM1310: RNCC: 5 | RNVC: 2

9 Mar 2012

5110-14-514-9620
Hand Optical Fiber Stripper

145149620
CT450366: RNCC: 3 | RNVC: 2

23 Jun 1999

5110-22-606-6770
Single Bit Ax

226066770
0000 881 2005: RNCC: 3 | RNVC: 2

13 Mar 2004

5110-12-148-6001
Reamer Blade Set

121486001
NO PRIMARY REF 12-148-6001: RNCC: 3 | RNVC: 2
101435: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-910-5008
Hand File

999105008
C00RDPATH4044: RNCC: 3 | RNVC: 2
H20869: RNCC: 5 | RNVC: 2
910-5008: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-100-4164
Hand File

251004164
NO PRIMARY REF25-100-4164: RNCC: 3 | RNVC: 2
41-3257-700-080: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-66-145-4768
Craftsman's Knife

661454768
999/50057/035: RNCC: 3 | RNVC: 2
440-942: RNCC: 5 | RNVC: 2

24 Sep 1999

5110-12-336-7444
Meiszel Halter

123367444
4990032-100: RNCC: 3 | RNVC: 2
MAGERD G496: RNCC: 5 | RNVC: 9

19 Dec 1994

5110-99-172-8821
Reamer Blade Set

991728821
HY BLADES: RNCC: 3 | RNVC: 2

20 Nov 1991

5110-15-184-8644
Roncola

151848644
NSN511015R589927: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-860-8278
Diagonal Cutting Pliers

218608278
942: RNCC: 3 | RNVC: 1
240: RNCC: 3 | RNVC: 1
41: RNCC: 3 | RNVC: 1
205: RNCC: 3 | RNVC: 2
024-0191-00: RNCC: 3 | RNVC: 2
1B153: RNCC: 3 | RNVC: 2
39GP16: RNCC: 4 | RNVC: 1
5110-0925: RNCC: 5 | RNVC: 9
ZCC180-051: RNCC: 5 | RNVC: 9
41P1718: RNCC: 5 | RNVC: 9

13 May 1971

5110-14-204-9945
Meche Pour Tamponno

142049945
NO PRIMARY REF14-204-9945: RNCC: 3 | RNVC: 2
1102-6: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-21-843-7756
Hand Reamer

218437756
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
712-049063: RNCC: 3 | RNVC: 2
B5-14: RNCC: 4 | RNVC: 1
50-10964: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-15-221-9430
Tagliatubo Mm.32

152219430
PG32: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-806-5272

5110-15-233-0756
Pialla Modellismo

152330756
1-12-101: RNCC: 3 | RNVC: 2
511015E070528: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-22-180-0702
Ladies' Scissors

221800702
601N-6: RNCC: 3 | RNVC: 2
841-5701-3-5: RNCC: 5 | RNVC: 9
M648505: RNCC: 5 | RNVC: 9

1 Jan 1966

5110-15-208-4871
Estrattore

152084871
5EAZPREL6-3ANN: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-434-1662
Reamer

994341662
NO PRIMARY REF 99-434-1662: RNCC: 3 | RNVC: 2
565128: RNCC: 5 | RNVC: 2

19 Mar 1990

5110-15-220-4398
Oliatore

152204398
OLIATORE: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-210-6068
Tagliapiastrelle

152106068
52P: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-204-8856
Electricians' Scissors

152048856
11.280.000: RNCC: 3 | RNVC: 2
(241)A087311.280.000: RNCC: 5 | RNVC: 2

23 Jan 2012

5110-33-000-1551

5110-33-102-2064

5110-37-513-8854

5110-14-204-9944
Meche Pour Tamponno

142049944
NO PRIMARY REF14-204-9944: RNCC: 3 | RNVC: 2
1102-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-13-118-0045
Back Saw

131180045
248-10-U13/14-HP: RNCC: 3 | RNVC: 2

8 Nov 2000

5110-33-155-9586
Firmer Chisel

331559586
119.145/1: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-12-171-2513
Hand- Fraeser

121712513
VG95211-ML-121712513: RNCC: 2 | RNVC: 2
105-13141W3-020.01: RNCC: 3 | RNVC: 2
105-13141W3-020-01: RNCC: 5 | RNVC: 2

21 Sep 1977

5110-12-122-2518
Hand Reamer

121222518
513A103SS13-32: RNCC: 3 | RNVC: 2

30 May 1969

5110-21-105-1220
Hand File

211051220
39GP53: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-37-518-7078
Diagonal Cutting Pliers

375187078
T6MA019: RNCC: 3 | RNVC: 2

8 Oct 2009

5110-66-057-3264
Broad Hatchet

5110-66-135-0683

5110-21-806-0390

5110-99-802-2349
Hand Reamer

5110-37-501-8720

5110-99-122-5026
Hand Metal Cutting Shears

991225026
E123-8IN: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-22-283-1125

5110-21-809-4057
Hand File

218094057
NO PRIMARY REF 21-809-4057: RNCC: 3 | RNVC: 2

11 Sep 1964

5110-17-701-5680
Hand File

177015680
NO PRIMARY REF 17-701-5680: RNCC: 3 | RNVC: 2

14 May 1970

5110-12-362-9234
Hand File

123629234
1112-PLUS-PH200: RNCC: 3 | RNVC: 2
4007220006924: RNCC: 5 | RNVC: 2

15 Apr 2004

5110-13-120-8098
Hand File

131208098
01.78.09.58: RNCC: 3 | RNVC: 2

9 Mar 2010

5110-21-893-1368
Tracer

218931368
704: RNCC: 3 | RNVC: 2

7 Aug 1983

5110-15-190-0568
Tronchese

151900568
2450227: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-216-5361
Lima Tipo Bastardo

152165361
3LCNCNCNBSM10P: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-019-7362
Hand Reamer

660197362
HAND REAMER: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-15-208-5296
Lima Ad Ago Taglio

152085296
3LPKC0AGDDN140: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-215-5813
Tronchese Knipex

152155813
MM250: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-299-0571
Poi Sabre D'abattis

142990571
NT.AIR.41-24.06/60: RNCC: 2 | RNVC: 2
0-76900-00000-50: RNCC: 3 | RNVC: 2
85-100-8949: RNCC: 6 | RNVC: 9

1 Jan 1973

5110-15-213-7310
Scalpello Per Legno

152137310
016-548: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-541-4173
Hand Stencil Cutting Die Set

995414173
STAMPSSTEELLETTERSAT0Z50MMH1GH: RNCC: 3 | RNVC: 2
AS600837: RNCC: 5 | RNVC: 1

25 Apr 1991

5110-12-313-3568
Reamer Blade Set

123133568
120.09.400: RNCC: 3 | RNVC: 2

24 Mar 1988

5110-15-237-5897
Raschietto Per Meta

152375897
FR01041004: RNCC: 3 | RNVC: 2
511015E068476: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-37-514-8010
Knockout Punch And Die

375148010
50146645: RNCC: 3 | RNVC: 2
50146645: RNCC: 5 | RNVC: 2

11 Mar 2008

5110-25-102-7804
Double Bow Cutting Punch

251027804
NO PRIMARY REF25-102-7804: RNCC: 3 | RNVC: 2
221 4310: RNCC: 5 | RNVC: 2
221-4310: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-12-126-1463
Hand Reamer

121261463
NO PRIMARY REF 12-126-1463: RNCC: 3 | RNVC: 2
26DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-866-8366
Hand Cold Chisel

218668366
PPC812: RNCC: 3 | RNVC: 2

16 Jun 1972

5110-99-764-0601
Punch

997640601
CH754-422: RNCC: 3 | RNVC: 2

2 Sep 1989

5110-21-105-3201
Edge Cutting Trimming Tool

211053201
126: RNCC: 3 | RNVC: 1
311263: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-99-273-0231
Hand File

992730231
953-003-060: RNCC: 3 | RNVC: 2

26 Feb 2007

5110-98-106-1174
Reamer Blade Set

981061174
NO PRIMARY REF 98-106-1174: RNCC: 3 | RNVC: 2
F1/FA 16186: RNCC: 5 | RNVC: 2

9 Mar 1979

5110-14-428-8454
Diagonal Cutting Pliers

144288454
NO PRIMARY REF14-428-8454: RNCC: 3 | RNVC: 2
0176200: RNCC: 5 | RNVC: 2
436: RNCC: 5 | RNVC: 2
91626659: RNCC: 5 | RNVC: 2

22 Dec 1988

5110-27-010-6551
Hand File

270106551
99999-NIIN-DA0014086: RNCC: 2 | RNVC: 1

21 Jun 2002

5110-14-559-7477
Hand File

145597477
NO PRIMARY REF 14-559-7477: RNCC: 3 | RNVC: 2
694 510 443 006: RNCC: 5 | RNVC: 2
90-123: RNCC: 5 | RNVC: 2

12 Feb 2009

5110-15-123-2591
Sgainacavi

151232591
ART162: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-17-031-3984
Diagonal Cutting Pliers

170313984
2111-4: RNCC: 3 | RNVC: 2

11 Feb 1968

5110-21-849-8241
Hand File

218498241
39GP53: RNCC: 4 | RNVC: 1
5110-0679: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-230-4046
Lima Abrasiva Trian

152304046
9735/1-150X10: RNCC: 3 | RNVC: 2
511015E067148: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-99-433-4484
Hoseclip Machine

994334484
NO PRIMARY REF 99-433-4484: RNCC: 3 | RNVC: 2
HN9-1: RNCC: 5 | RNVC: 2
0274-13299: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-110-7440
Asbestos Cement Pipe And Conduit Taper Joint Cutter

171107440
SL5120-2-263-101: RNCC: 3 | RNVC: 2

18 Feb 1997

5110-66-080-7133
Paring Gouge

660807133
161: RNCC: 3 | RNVC: 1

25 Oct 1974

5110-15-205-0513
Motosega Oleo

152050513
GS 260: RNCC: 3 | RNVC: 2
(241)A4155GS260: RNCC: 5 | RNVC: 2

15 Feb 2012

5110-15-173-5628
Coltello Retraibile

151735628
8211702/ELE: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-21-639-3979
Double Bit Ax

216393979
101: RNCC: 3 | RNVC: 1
D0UBLEBITAXEWITHHANDLE: RNCC: 3 | RNVC: 1
35M2K: RNCC: 3 | RNVC: 2
39GP3: RNCC: 4 | RNVC: 1
MDB35036: RNCC: 5 | RNVC: 2
REVM: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-15-221-3891
Cesoia Per Tubo

152213891
CES0SIAXTUB0: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-190-0013
Battente Di Ricambi

151900013
013900160: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-165-4163
Seghetto Ad Arco

151654163
084604778: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-639-6306

5110-25-103-9154

5110-15-208-4972
Scalpello

152084972
3SAHMMCNZ250X30: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-607-1860

5110-25-100-8927
Single Bit Ax

5110-99-604-7387
Bolt Knockout Cap

5110-12-373-3934
Hand Valve Seat Rotary Tool

123733934
234 14 120: RNCC: 3 | RNVC: 2
234.14.120: RNCC: 5 | RNVC: 2

29 Oct 2007

5110-15-215-1170
Cesoia A Leva

152151170
PL5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-244-0708

5110-12-131-4841
Reamer Blade Set

121314841
141.08.400: RNCC: 3 | RNVC: 2
141-08-400: RNCC: 5 | RNVC: 2
200-59HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-910-6481
Hand Metal Stamping Die

999106481
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A-H2633: RNCC: 5 | RNVC: 9
DL9A: RNCC: 5 | RNVC: 9
H2633: RNCC: 6 | RNVC: 9
H2633: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-126-2062
Gimlet

121262062
DIN7481-30: RNCC: 2 | RNVC: 2
281-30: RNCC: 3 | RNVC: 2
M281-30: RNCC: 3 | RNVC: 2
2-30: RNCC: 3 | RNVC: 2
30DIN7481: RNCC: 5 | RNVC: 2

30 May 1969

5110-21-862-5798
Hand File

218625798
39GP30: RNCC: 4 | RNVC: 1
5110-0373: RNCC: 6 | RNVC: 9

17 Jun 1971

5110-17-701-4757
Hand Reamer

177014757
3-75H7DIN206SS: RNCC: 2 | RNVC: 1
586-3-75: RNCC: 3 | RNVC: 2
DIN206: RNCC: 4 | RNVC: 1

14 May 1970

5110-15-214-9134
Portalima Pansar

152149134
9-458-14-0-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-295-6818

5110-13-107-7584
Ladies' Scissors

131077584
741-7220: RNCC: 3 | RNVC: 2
BC830: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-27-010-6631
Hand File

270106631
99999-NIIN-DA0037297: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-66-061-3894

5110-15-165-4076
Scalpello

151654076
35250: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-208-8324
Alesatore

152088324
3AANGERMLQ31X34X139: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-130-9635
Korrekt Fraesstahl

121309635
900-15VD3H3-30: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-133-3602
Forbici Per Elettri

151333602
1129-145: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-66-012-4500
Bolt Cutter Jaws

660124500
J942F: RNCC: 3 | RNVC: 2
DEF(AUST)5810: RNCC: 4 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
810: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-14-244-3669

5110-14-264-4806

5110-14-244-3687

5110-66-150-2179
Hand Cold Chisel

661502179
NO PRIMARY REF 66-150-2179: RNCC: 3 | RNVC: 2
03902503: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-112-2717

5110-15-212-7264
Sega A Tazza Con De

152127264
HM4108-41: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-132-2349
Reamer Blade Set

121322349
101.13.400: RNCC: 3 | RNVC: 2
101-13-400: RNCC: 5 | RNVC: 2
800-20HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-103-2890

5110-14-244-4278
Diagonal Cutting Pliers

142444278
10-041: RNCC: 3 | RNVC: 2
0UTF8: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-12-126-1540
Hand Metal Cutting Shears

121261540
5730021-300RECHTS: RNCC: 3 | RNVC: 2
107-300RECHTS: RNCC: 3 | RNVC: 9

30 May 1969

5110-27-010-6665
Hand File

270106665
99999-NIIN-DA0037193: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-21-888-3983
Bolt Cutter

218883983
84-205: RNCC: 3 | RNVC: 2

21 Mar 1982

5110-66-076-9570
Hand File

660769570
6IN KNIFE BASTARD: RNCC: 3 | RNVC: 2

26 Sep 1974

5110-22-607-6030
Diagonal Cutting Pliers

226076030
187-8286: RNCC: 3 | RNVC: 2

8 Jul 2004

5110-98-201-7965

5110-21-105-2162

5110-22-303-3672

5110-15-213-9518
Serie Stanpini Lett

152139518
SSTL40: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-401-2865

5110-25-103-9127

5110-22-600-8221
Hand Hacksaw Blade

226008221
91.2458.01.224: RNCC: 3 | RNVC: 2

6 Aug 2002

5110-12-385-4211
Hand Cable Stripper

123854211
16 60 100 SB: RNCC: 3 | RNVC: 2
4003773040811: RNCC: 5 | RNVC: 2

31 May 2011

5110-14-266-7022

5110-21-849-9088
Ship Scraper

218499088
5110-1116: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-207-6832
Taglia Tubi

152076832
2420/1X35: RNCC: 3 | RNVC: 2
(241)A03022420/1X35: RNCC: 5 | RNVC: 2

9 Nov 2012

5110-12-021-2496

5110-13-103-0079
Firmer Chisel

131030079
B325-326-16: RNCC: 3 | RNVC: 9

1 Apr 1975

5110-15-064-7883
Adz

150647883
192-0692/11: RNCC: 3 | RNVC: 2

1 Mar 1983

5110-21-851-2312
Firmer Gouge

218512312
927A: RNCC: 3 | RNVC: 1
5110-0741: RNCC: 6 | RNVC: 9

6 Oct 1968

5110-25-103-4825
Bearing Scraper

251034825
SBF5110HVK9-1: RNCC: 2 | RNVC: 1
B100X13-5FS5110-0613: RNCC: 2 | RNVC: 2

1 Jan 1984

5110-66-036-1717
Single Bow Cutting Punch

660361717
F2479: RNCC: 3 | RNVC: 1

2 Oct 1970

5110-99-745-9300
Hand File

997459300
FA643G: RNCC: 3 | RNVC: 2

13 Jul 1982

5110-99-739-3344
End Cutting Nippers

997393344
8247DS: RNCC: 3 | RNVC: 2
7285DS: RNCC: 5 | RNVC: 9
7285AS: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-002-4636
Reamer

150024636
34004 01 2482: RNCC: 3 | RNVC: 2

29 Aug 2013

5110-22-274-1119

5110-21-106-1200

5110-21-105-2198

5110-15-165-4283
Scalpello Per Legno

151654283
605636: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-109-1513

5110-66-150-1887
Hand Hacksaw Frame

661501887
NO PRIMARY REF 66-150-1887: RNCC: 3 | RNVC: 2
00872855: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-127-2973
Lisciatoio Foro Gui

151272973
A90330: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-990-6760
Stanley Knife

999906760
SGE1000B16: RNCC: 3 | RNVC: 2

2 Feb 2002

5110-14-375-3402
Hand Metal Stamping Die Set

143753402
1.01.09.100: RNCC: 3 | RNVC: 2
1-01-09-100: RNCC: 5 | RNVC: 2

26 Feb 1982

5110-66-013-7593
Hand Reamer

660137593
650 4860: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-244-4241

5110-12-133-6918
Craftsman's Knife

121336918
1171: RNCC: 3 | RNVC: 2
3015: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-428-7440

5110-22-221-2170
Hand Hacksaw Blade

222212170
72-2309-0: RNCC: 3 | RNVC: 2

1 Dec 1972

5110-21-887-7591
Deburring Tool

218877591
CP-10: RNCC: 3 | RNVC: 2

24 Jan 1982

5110-12-365-5970
Diagonal Cutting Pliers

123655970
66024140: RNCC: 3 | RNVC: 2

18 Jan 2005

5110-66-159-1147
Keyhole Saw

661591147
2014100: RNCC: 3 | RNVC: 2

23 Feb 2011

5110-15-161-4743
Scalpello Per Meta

151614743
7314151-83029: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-15-208-4513
Alesatore

152084513
3AARFCFMNP15: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-305-6441
Diagonal Cutting Pliers

123056441
2666FKK: RNCC: 3 | RNVC: 2
1496593: RNCC: 5 | RNVC: 2
149659: RNCC: 5 | RNVC: 9

28 Nov 1985

5110-12-126-1671

5110-21-874-4642
Center Wire Cutter

218744642
0690C: RNCC: 3 | RNVC: 2

2 Feb 1977

5110-15-207-7652
File Flat

152077652
20239: RNCC: 3 | RNVC: 2
(241)AF76620239: RNCC: 5 | RNVC: 2

16 Nov 2012

5110-21-104-9825
Woodworking Butt Chisel

211049825
3590A16: RNCC: 3 | RNVC: 1
GGGC311: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-66-054-4716
Hand Wire Stripper

660544716
NO PRIMARY REF 66-054-4716: RNCC: 3 | RNVC: 2
1951: RNCC: 5 | RNVC: 2
999/4/42556/484: RNCC: 5 | RNVC: 2

26 Oct 1972

5110-14-298-7821
A Monture Scie

142987821
NO PRIMARY REF14-298-7821: RNCC: 3 | RNVC: 2
232TM75-155LI0N75: RNCC: 5 | RNVC: 2
23217475M: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-27-011-6661
Hand File

270116661
09013KE1095: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-130-2041

5110-14-572-9847
Hand Metal Cutting Punch And Die Set

145729847
658689: RNCC: 3 | RNVC: 2
3148516586896: RNCC: 5 | RNVC: 2

3 Sep 2012

5110-66-105-4605
Hand File

661054605
3604100: RNCC: 3 | RNVC: 2

9 Dec 1987

5110-15-165-4290
Scalpello Con Param

151654290
35PM200: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-66-064-4876
Combination Plane

660644876
BS 3623: RNCC: 3 | RNVC: 1
12-250: RNCC: 3 | RNVC: 2
50C0MBINATI0NPLANE: RNCC: 3 | RNVC: 2

6 Nov 1974

5110-99-122-9844
Hand Wire Stripper

991229844
H35-2: RNCC: 3 | RNVC: 2
1C/1229844: RNCC: 6 | RNVC: 9
TYPE H35/2: RNCC: 6 | RNVC: 9
D/ST62A/232/1/218: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-136-1911
Tronchese

151361911
1796-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-27-017-9127
Hand File

270179127
60261002: RNCC: 2 | RNVC: 1
60261002: RNCC: 5 | RNVC: 2

7 Oct 2003

5110-15-172-6205
Serie Raspe Corradi

151726205
SERIE RASPE CORRADI DA 6 A 12 P: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-22-607-3278
Hand File

226073278
1-170-10-3-0: RNCC: 3 | RNVC: 2
8020040: RNCC: 3 | RNVC: 2

8 Jun 2004

5110-25-139-2891
Hand Cable Stripper

251392891
9801.10C: RNCC: 3 | RNVC: 2

14 Jan 1991

5110-12-140-1442

5110-15-125-1069
Tagliacavi Cromato

151251069
1132-170: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-144-1211

5110-99-135-8213

5110-21-807-1184

5110-17-017-6891
Hand File

170176891
GGGF325TYPE9: RNCC: 2 | RNVC: 2
TE9WTV1-3-8-25: RNCC: 3 | RNVC: 2

17 Jun 1972

5110-98-102-0292
Diagonal Cutting Pliers

981020292
190-7 FULLER: RNCC: 3 | RNVC: 2
PW1452/7 ELLIOTT: RNCC: 6 | RNVC: 9
542-7C CRESCENT: RNCC: 6 | RNVC: 9

10 Aug 1979

5110-22-617-3463
Bolt Cutter

226173463
4559-24: RNCC: 3 | RNVC: 2
108090: RNCC: 5 | RNVC: 2
LOBSTER 108090: RNCC: 5 | RNVC: 2
1358738: RNCC: 5 | RNVC: 2
0714 06 610: RNCC: 5 | RNVC: 2
470-4733: RNCC: 6 | RNVC: 9

9 Jun 2008

5110-22-624-3682
Hand Operated Cable Cutter

226243682
257-1712: RNCC: 3 | RNVC: 2

18 Sep 2012

5110-27-018-6070
Hand Reamer

270186070
5110-42276-00003: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-99-309-1968

5110-21-872-0860
Revolving Head Cutting Punch

218720860
186-8IN: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

7 Oct 1975

5110-17-124-3932
Hand Wire Stripper

171243932
1066753: RNCC: 3 | RNVC: 2

19 Jun 2012

5110-15-144-5049
Scalpello Per Legno

151445049
5216G10: RNCC: 3 | RNVC: 2
6060-10: RNCC: 3 | RNVC: 2
8270-10: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-21-876-0385
Hand Masonry Drill

218760385
MT1006: RNCC: 3 | RNVC: 1
5133-3317: RNCC: 6 | RNVC: 9

21 Jun 1977

5110-12-170-4607
Hand Reamer

121704607
DIN206-B12-HSS: RNCC: 2 | RNVC: 9
301-FORM-12: RNCC: 3 | RNVC: 2
F1131-12: RNCC: 3 | RNVC: 2
11602HSS12: RNCC: 3 | RNVC: 9
513A201HSS12SPIRALGENUTET: RNCC: 3 | RNVC: 9
536C12: RNCC: 3 | RNVC: 9
B12DIN206HSS: RNCC: 5 | RNVC: 2
334-12: RNCC: 5 | RNVC: 9

14 Jul 1977

5110-15-176-0903
Lame Ricambio In As

151760903
1772015: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-19-001-0689
Hand Cold Chisel

190010689
207.105: RNCC: 3 | RNVC: 2

13 Aug 2004

5110-21-107-4565
Pocket Knife

211074565
UNIT6-2-6: RNCC: 2 | RNVC: 2
313226: RNCC: 6 | RNVC: 9
C1450: RNCC: 6 | RNVC: 9
C1472: RNCC: 6 | RNVC: 9

4 Jun 1968

5110-15-208-4872
Estrattore Universa

152084872
5EAZPREL6-2A11: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-27-010-6566
Hand File

270106566
99999-NIIN-DA0037331: RNCC: 2 | RNVC: 1

21 Jun 2002

5110-21-868-0145
Craftsman's Knife

218680145
334B70: RNCC: 3 | RNVC: 2
200-11-615: RNCC: 5 | RNVC: 9

14 Jul 1972

5110-12-198-9975
Drehwerkz Luenette

121989975
216.55.200: RNCC: 3 | RNVC: 2

20 Mar 1984

5110-21-111-5070
Hand Reamer

211115070
MB: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-15-165-3867
Tenaglia

151653867
630G280: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4194
Cacciavite 4X100

151654194
327005: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-208-4916
Alesatori

152084916
3AANGERMCN10-5A31-5S10CN: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-303-8499
Stripper-Wire-Hand

12 Jun 1974

5110-25-103-3322

5110-21-807-1178

5110-15-209-6538
Cesoia

152096538
H65-85: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-98-106-1132
Sheet Metal C Blade

981061132
NO PRIMARY REF 98-106-1132: RNCC: 3 | RNVC: 2
MONODEX: RNCC: 5 | RNVC: 2

2 Mar 1979

5110-21-105-2131
Punch And Die Punch

211052131
2: RNCC: 3 | RNVC: 1
2-7/32: RNCC: 3 | RNVC: 1
300080219: RNCC: 3 | RNVC: 2
1F37: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-12-309-3535
Hand Reamer

123093535
DIN206-B4,74H11-HSS: RNCC: 2 | RNVC: 2

19 Jan 1987

5110-98-205-4730
Craftsman's Knife

982054730
DFAMPD00178: RNCC: 2 | RNVC: 2

11 Oct 2000

5110-17-701-5884
Crosscut Hand Saw

177015884
NO PRIMARY REF 17-701-5884: RNCC: 3 | RNVC: 2
331X8428: RNCC: 5 | RNVC: 2

15 May 1970

5110-27-051-2915
Hand Reamer

270512915
B00301010600: RNCC: 2 | RNVC: 9

14 Oct 2010

5110-15-000-0670
Pliers

150000670
1137BA: RNCC: 3 | RNVC: 2
011370801: RNCC: 5 | RNVC: 2

23 Jan 2013

5110-99-910-4223
Firmer Chisel

999104223
DEF STAN 51-11:PART 27: RNCC: 4 | RNVC: 1
BS1943: RNCC: 4 | RNVC: 1
BS1943-TABLE1A: RNCC: 6 | RNVC: 9
TABLE1A: RNCC: 6 | RNVC: 9
H408: RNCC: 6 | RNVC: 9
1A389: RNCC: 6 | RNVC: 9
FA11286: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-98-107-7128
Hand Reamer

981077128
PARALLEL25/64X2-1/2X5IN.: RNCC: 3 | RNVC: 2

8 Feb 1984

5110-98-102-0118
Hand File

981020118
150MM TAPER SAW X-SLIM: RNCC: 3 | RNVC: 2
150MM TAPER SAW X-SLIM: RNCC: 5 | RNVC: 9
TAPER,EXTRA SLIM 6IN LG: RNCC: 6 | RNVC: 9
FD51R STUBS: RNCC: 6 | RNVC: 9

4 Oct 1979

5110-15-199-0788
Double Bow Cutting Punch

151990788
3703-58: RNCC: 3 | RNVC: 2
C3703-58: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-22-603-7645
Hand File

226037645
LR 12900 NR4 150MM: RNCC: 3 | RNVC: 2

20 May 2003

5110-98-103-3618

5110-13-113-9516
Craftsman's Knife

131139516
23: RNCC: 3 | RNVC: 2

19 Mar 1991

5110-21-849-8244
Hand File

218498244
FF19H: RNCC: 3 | RNVC: 2
39GP53: RNCC: 4 | RNVC: 1
5110-0665: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-12-126-2492
Aushaenge-Sa Haken

121262492
NO PRIMARY REF 12-126-2492: RNCC: 3 | RNVC: 2
166: RNCC: 5 | RNVC: 9
LDIN7245: RNCC: 5 | RNVC: 9

30 May 1969

5110-13-108-1546
Leather Shears

131081546
643-0330: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-66-150-5797
Scraper Blade

661505797
NO PRIMARY REF 66-150-5797: RNCC: 3 | RNVC: 2
00069207: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-851-3579
Crosscut Hand Saw

218513579
D8: RNCC: 3 | RNVC: 1
5110-1052: RNCC: 5 | RNVC: 9

6 Oct 1968

5110-17-120-0754
Oval Cutting Punch

171200754
1370360: RNCC: 3 | RNVC: 2

29 Jan 2007

5110-12-351-9119
Diagonal Cutting Pliers

123519119
7841125: RNCC: 3 | RNVC: 2
4003773025177: RNCC: 5 | RNVC: 2

14 Sep 2000

5110-25-103-5062

5110-25-103-9129

5110-25-103-9052

5110-12-129-3919
Hand Reamer

121293919
DIN859-B10,5-HSS: RNCC: 2 | RNVC: 2
415-10,5: RNCC: 3 | RNVC: 2
11606999-10,5: RNCC: 3 | RNVC: 2
011011-10,5: RNCC: 3 | RNVC: 2
513A204HSS10-5SPIRALGENUTET: RNCC: 5 | RNVC: 9
10-5DIN859SCHNELLARBEITSSTAHLSP-: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-149-7483
Hand File

661497483
NO PRIMARY REF 66-149-7483: RNCC: 3 | RNVC: 2
07079607: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-27-000-8014
Hand Cold Chisel

270008014
5500 47 0250: RNCC: 3 | RNVC: 2

23 Oct 1990

5110-27-018-7892
Hand File

270187892
09013KE1007: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-25-101-0786
Back Saw

251010786
FS 5110-0693: RNCC: 2 | RNVC: 2
41-6954-120-140: RNCC: 5 | RNVC: 2
213 0040: RNCC: 5 | RNVC: 2
213-0040: RNCC: 5 | RNVC: 2
203121-3: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-21-639-4929
Woodworking Butt Chisel

216394929
5002C: RNCC: 3 | RNVC: 1
750C: RNCC: 3 | RNVC: 1
200: RNCC: 3 | RNVC: 1
750: RNCC: 3 | RNVC: 1
423-38: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-17-029-9483
Hand File

170299483
TVA5110-2-263-005-1.1.18: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
12400803: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-12-315-5703
Schleifpapi Locher

123155703
932-313-098: RNCC: 3 | RNVC: 2

9 Nov 1988

5110-12-140-1390

5110-21-866-8956
Rabbet Plane

218668956
79: RNCC: 3 | RNVC: 2

14 Jul 1972

5110-12-176-8367
Hand Reamer

121768367
DIN206-B29-HSS: RNCC: 2 | RNVC: 2
301-FORM B-29: RNCC: 3 | RNVC: 2
F1131-29: RNCC: 3 | RNVC: 2
7586C29: RNCC: 5 | RNVC: 9
536C29: RNCC: 5 | RNVC: 9
B29DIN206HSS: RNCC: 5 | RNVC: 9
13010-29: RNCC: 5 | RNVC: 9

20 Dec 1978

5110-15-215-4861
Cesoia A Leva

152154861
EX5110-RI-530-0092: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-185-0767
Archetto Stanley Co

151850767
15245: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-885-1856
Handicraft Wood Carving Chisel Kit

218851856
M152: RNCC: 3 | RNVC: 2

7 Apr 1981

5110-15-184-7603
Raschietto Con Mani

151847603
3ZANVRLCM: RNCC: 3 | RNVC: 2

30 Dec 2008

Load More Results