What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 86 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 86of 112

5110-99-453-9258
Deliv Grinding Tool

994539258
B2718F16: RNCC: 3 | RNVC: 2
37G971: RNCC: 6 | RNVC: 9
37G971: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-010-7452
Hand Reamer

270107452
99999-NIIN-DA0037348: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-075-8401
Hand Optical Fiber Cleaving Tool

990758401
NO PRIMARY REF 99-075-8401: RNCC: 3 | RNVC: 2
10-0760: RNCC: 5 | RNVC: 2
97HC01A: RNCC: 6 | RNVC: 9

28 Feb 1997

5110-99-884-6556
Knock Punch And Die

998846556
QMA17.5M: RNCC: 3 | RNVC: 2
022OA-003: RNCC: 6 | RNVC: 9
022QZ-050: RNCC: 6 | RNVC: 9

4 Sep 2002

5110-22-119-5473
Plate Steel Shears

221195473
139 685: RNCC: 3 | RNVC: 2

24 Apr 1985

5110-14-427-1066
Dressage Outil

144271066
540781: RNCC: 3 | RNVC: 2

6 Oct 1988

5110-12-120-2219
Hand Rasp

121202219
19143: RNCC: 3 | RNVC: 2
3502S: RNCC: 5 | RNVC: 9
BDIN8348: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-011-7739
Hand Reamer

270117739
10111KR5031: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-22-269-1028
Grinding Ring

222691028
62074-09H-0249: RNCC: 3 | RNVC: 2
62074-09H-0249: RNCC: 5 | RNVC: 2

7 Jun 1996

5110-15-110-5155
Pliers

151105155
2189-160: RNCC: 3 | RNVC: 2

7 Sep 1989

5110-27-039-9387
Diagonal Cutting Pliers

270399387
G12-18-0160: RNCC: 2 | RNVC: 1
G12-18-0160: RNCC: 5 | RNVC: 9

28 Dec 2007

5110-15-199-0783
Double Bow Cutting Punch

151990783
3703-49: RNCC: 3 | RNVC: 2
C3703-49: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-98-104-6909
Dovetail Saw

5110-98-105-8799

5110-27-010-6728
Hand File

270106728
99999-NIIN-DA0014275: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-25-115-4710
Wood Scraper

251154710
223 7320: RNCC: 5 | RNVC: 2
223-7320: RNCC: 5 | RNVC: 2
204901-5: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-99-910-4899
Hand File

999104899
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13385: RNCC: 6 | RNVC: 9
9104899: RNCC: 6 | RNVC: 9
1A913: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-842-9150
Injector Reamer Set

998429150
NO PRIMARY REF 99-842-9150: RNCC: 3 | RNVC: 2
GA88: RNCC: 3 | RNVC: 2
LV7RRGA88: RNCC: 6 | RNVC: 9
W20RR112: RNCC: 6 | RNVC: 9
W20RRGA88: RNCC: 6 | RNVC: 9
729-719007: RNCC: 6 | RNVC: 9
18Q926: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-044-1326
Diagonal Cutting Pliers

270441326
E06-11-0140: RNCC: 2 | RNVC: 1
E06-11-0140: RNCC: 5 | RNVC: 9

12 Jan 2009

5110-15-160-9085
Chiave Usag

151609085
F720176741: RNCC: 2 | RNVC: 2

6 Oct 2000

5110-14-244-0750

5110-17-703-3604
Paper Cutter

177033604
SNYAPPARAAT PAPIER ELEKTRISCH: RNCC: 3 | RNVC: 1

30 Sep 1971

5110-15-218-3286
Giravite Torx

152183286
7/01713: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-129-5489

5110-33-204-3386
Diagonal Cutting Pliers

332043386
6.227: RNCC: 3 | RNVC: 2

6 Jul 2005

5110-22-603-4448
Hand File

226034448
1-110-12-3-3: RNCC: 3 | RNVC: 2

8 Apr 2003

5110-21-104-9824
Woodworking Butt Chisel

211049824
1F21100: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-33-158-4981
Tube Cutter Cutting Wheel

331584981
276.194: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-134-4897
Segaccio Con Manico

151344897
5444-400: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-99-910-4147
Instrument Broach

999104147
DEF1198: RNCC: 4 | RNVC: 1
1A3995: RNCC: 6 | RNVC: 9
FA10541: RNCC: 6 | RNVC: 9
9104147: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-121-4107
Hand File

121214107
DIN7261-B200-3: RNCC: 2 | RNVC: 2
3122203: RNCC: 3 | RNVC: 2
1122-200-3: RNCC: 3 | RNVC: 2
B200-3DIN7261: RNCC: 5 | RNVC: 2
C200X3DIN8333: RNCC: 5 | RNVC: 9
DIN7261B200-3: RNCC: 5 | RNVC: 9
1126-200-3: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-270-4910

5110-21-849-7784
Hand Operated Wire Rope Cutter

218497784
1A: RNCC: 3 | RNVC: 2
5110-0278: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-217-5495
Ronchesi Pastorini

152175495
EXRI7905514: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-220-6923
Segaccio

152206923
1940: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-304-2957

5110-17-109-5994
Diagonal Cutting Pliers

171095994
SL5120-2-263-074: RNCC: 3 | RNVC: 2

28 Nov 1995

5110-15-123-7274
Tipo Nerva Ugnetto

151237274
37PM: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-214-8283
Coltello Multilama

152148283
ARMY-KNIFE: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-264-6125
Hand Masonry Drill

142646125
1112-7: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-21-903-3423
Reamer

219033423
TLD2060AR2-3: RNCC: 3 | RNVC: 2

26 Aug 1988

5110-14-244-4242

5110-12-126-1274
Hand File

121261274
2102103: RNCC: 3 | RNVC: 2
M50X3DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-248-5516

5110-12-140-1497
Hand Reamer

121401497
101.08.000: RNCC: 3 | RNVC: 2
101-08-000: RNCC: 5 | RNVC: 2
800-1HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-183-1530
Cesoia Per Lamiera

151831530
203DN: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-639-6405

5110-98-857-3275

5110-12-120-9368
Hand File

121209368
DIN7262-E250-3: RNCC: 2 | RNVC: 2
1212-250-3: RNCC: 3 | RNVC: 2
E250-3DIN7262: RNCC: 5 | RNVC: 2
A250XE3DIN8332: RNCC: 5 | RNVC: 9
DIN7262E250-3: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-910-5168
Auger Handle

999105168
A3-9807-0: RNCC: 3 | RNVC: 2
A3-9807: RNCC: 5 | RNVC: 1
FA14326: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-230-5402
Lima Mezzatonda

152305402
511015E064493: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-27-011-5039
Hand File

270115039
10121ME0082: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-99-573-5473

5110-99-747-2722
Chipless Cutter

997472722
D12530-001: RNCC: 3 | RNVC: 2
D12530001: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-391-4264
Hand Operated Wire Rope Cutter

143914264
412.16: RNCC: 3 | RNVC: 2
3148511754603: RNCC: 5 | RNVC: 2
412-16: RNCC: 5 | RNVC: 2
91493247: RNCC: 5 | RNVC: 2
0715 06 73: RNCC: 5 | RNVC: 2
0175460: RNCC: 5 | RNVC: 9

1 Mar 1984

5110-21-104-9520
Bucksaw Blade

211049520
430: RNCC: 3 | RNVC: 1
403: RNCC: 3 | RNVC: 1
1F116000: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-21-841-7956
Hand Rasp

218417956
14INHORSERASPTANGED: RNCC: 3 | RNVC: 2
918057: RNCC: 5 | RNVC: 2
18057: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-15-197-0929
Razor Blade Glass Scraper

151970929
PN UAS 00013300: RNCC: 3 | RNVC: 2
3470F76024500: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-397-4854
Craftsman's Knife

143974854
73022000: RNCC: 3 | RNVC: 2

14 Dec 1984

5110-15-213-3255
Cesoia Per Metallo

152133255
MA225R: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-876-0204
Hand Metal Stamping Die Set

218760204
3593: RNCC: 3 | RNVC: 1
1568T180: RNCC: 3 | RNVC: 2
1568Y18: RNCC: 5 | RNVC: 9

19 Apr 1977

5110-15-218-3265
Pinzetta Di Precisi

152183265
7/01503: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-4545
Alesatore

152084545
3AARPERMDQ12-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-371-5779
Hand Cold Chisel

123715779
311 350 1: RNCC: 3 | RNVC: 2

19 Apr 2007

5110-14-573-5238
Hand Hacksaw Blade

145735238
668B.10: RNCC: 3 | RNVC: 2

18 Oct 2012

5110-99-609-5706
Radius Cutter

996095706
HU14798: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-99-411-1663
Finger Grip Hand Saw

994111663
TL-502-244: RNCC: 3 | RNVC: 2

28 Nov 2007

5110-66-149-3490
Pocket Scissors

661493490
NO PRIMARY REF 66-149-3490: RNCC: 3 | RNVC: 2
937: RNCC: 5 | RNVC: 2

3 Apr 2003

5110-99-910-5678
Hollo Cutting Punch

999105678
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
920 8068 28MM: RNCC: 5 | RNVC: 2
07243200: RNCC: 5 | RNVC: 2
DL9A: RNCC: 5 | RNVC: 9
DL9A-H2037: RNCC: 5 | RNVC: 9
H2037: RNCC: 6 | RNVC: 9
F1FA16084: RNCC: 6 | RNVC: 9
1B2998: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-5675
Tinner's Hollow Cutting Punch

999105675
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
07242803: RNCC: 5 | RNVC: 2
920 8068 22MM: RNCC: 5 | RNVC: 2
DL9A: RNCC: 6 | RNVC: 9
DL9A-H2035: RNCC: 6 | RNVC: 9
H2035: RNCC: 6 | RNVC: 9
F1FA16081: RNCC: 6 | RNVC: 9
1B2994: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-16-001-0033
Hand File

160010033
413111602025: RNCC: 3 | RNVC: 2

1 Aug 2001

5110-21-870-0789
Dielectric Trim Jig

218700789
KTD86: RNCC: 3 | RNVC: 2

16 Aug 1973

5110-22-121-5546
Chisel

221215546
304: RNCC: 3 | RNVC: 2

25 May 1990

5110-25-145-4757
Hand Drill

5110-17-031-3971
Afsteek- Mes

5110-21-639-6424

5110-21-639-6442

5110-21-639-6278

5110-15-006-7718
Scraper Ic

150067718
20005-034-00: RNCC: 3 | RNVC: 2

24 Nov 1979

5110-17-015-5870
Hand File

170155870
TVA5110-2-263-005-1.1.6: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
12100802: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-12-122-2490
Hand Reamer

121222490
DIN204-B1: RNCC: 2 | RNVC: 2
445-1: RNCC: 3 | RNVC: 2
11682010: RNCC: 3 | RNVC: 2
024012-1: RNCC: 3 | RNVC: 2
D1DIN204: RNCC: 5 | RNVC: 2
513E201HSSFERTIG1SPIRALGENUTET: RNCC: 5 | RNVC: 9
DIN204-D1: RNCC: 5 | RNVC: 9
DIN204D1: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-217-9474
Cesoia Per Lamiera

152179474
PASTORINO563: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-119-9552

5110-25-103-4258

5110-25-103-3211

5110-25-119-8266
Metal Cuttin Shears

5110-25-119-9364

5110-25-119-9366

5110-12-126-1934
Craftsman's Knife

121261934
5153: RNCC: 3 | RNVC: 2

30 May 1969

5110-27-000-7997
Hand Cape Chisel

270007997
5010 03 0026: RNCC: 3 | RNVC: 2

7 Jun 1991

5110-99-465-6081

5110-99-465-6083

5110-14-296-8611
Cylinder Ridge Reamer

142968611
R7064601: RNCC: 3 | RNVC: 2
R706-46: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-98-107-7164
Hand Reamer

981077164
PARALLEL61/64X5X10IN.: RNCC: 3 | RNVC: 2

10 Feb 1984

5110-99-975-2618
Hand File

999752618
F-102: RNCC: 3 | RNVC: 2

22 Mar 2012

5110-14-529-3835
Hand Metal Cutting Shears

145293835
982.G: RNCC: 3 | RNVC: 2
3148512170105: RNCC: 5 | RNVC: 2
982G: RNCC: 5 | RNVC: 2

28 Mar 2002

5110-15-220-5707
Giravite Isolato Wi

152205707
125X5,5: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-136-2453
Tronchese Piccola

151362453
1616-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-208-5008
Scalpello

152085008
3SANMMPPZ250X26: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-637-4388
Adjustable Re Pilot

216374388
1G: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-66-151-3255
Hand Reamer

661513255
038674: RNCC: 3 | RNVC: 2
05869301: RNCC: 5 | RNVC: 2

28 Aug 2003

5110-21-905-9551
Key Way Cutt Rivnut

219059551
C8575: RNCC: 3 | RNVC: 2

25 Jan 1989

5110-15-208-5015
Scalpello Da Murato

152085015
3SANMRRRZ500X25: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-639-5553
Tinner's Hollow Cutting Punch

216395553
101-1-7/8: RNCC: 3 | RNVC: 2
39GP44: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-15-138-0725
Tronchese A Taglio

151380725
086001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-136-3673
Pialetto In Metallo

151363673
5784: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-639-4257
Hand File

216394257
39GP30: RNCC: 4 | RNVC: 1

1 Feb 1965

5110-12-371-5274
Knife Blade

123715274
71: RNCC: 3 | RNVC: 2
00.21.61.27: RNCC: 5 | RNVC: 2
71.60: RNCC: 5 | RNVC: 2

13 Apr 2007

5110-14-558-0332
Hand Metal Cutting Shears

145580332
980: RNCC: 3 | RNVC: 2
779245: RNCC: 5 | RNVC: 2
91883618: RNCC: 5 | RNVC: 2

25 Aug 2008

5110-99-581-6851
Grooving Tool

995816851
UX18922RRA: RNCC: 3 | RNVC: 2
LE463B1: RNCC: 6 | RNVC: 9
F815 942431: RNCC: 6 | RNVC: 9

24 Apr 1996

5110-21-104-9518
Bucksaw Blade

211049518
403: RNCC: 3 | RNVC: 1
430: RNCC: 3 | RNVC: 1
1F115950: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-21-105-1215
Hand File

211051215
39GP53: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-14-338-1611

5110-14-257-7556

5110-15-165-4090
Lima Piatta

151654090
2560412: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-98-200-9264
Reamer Blade Set

982009264
NO PRIMARY REF 98-200-9264: RNCC: 3 | RNVC: 2
ST 11: RNCC: 5 | RNVC: 2

20 Feb 1987

5110-21-855-3505
File Handle

218553505
4STR0NGH0LDFILEHANDLE: RNCC: 3 | RNVC: 2
5110-0769: RNCC: 6 | RNVC: 9

19 Sep 1969

5110-99-130-2042

5110-21-639-4396
Hand File

216394396
912051: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-21-639-4171
Ice Shaver

216394171
649C: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-37-517-8579
Scraping Knife

375178579
X5211: RNCC: 3 | RNVC: 2
X5211: RNCC: 5 | RNVC: 2

30 Jun 2009

5110-66-017-2411
Hand File

660172411
911969: RNCC: 3 | RNVC: 1
ROUNDFILE: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-99-717-9758
Jointer Plane

997179758
08: RNCC: 3 | RNVC: 2

4 Feb 1981

5110-15-165-4083
Forbice Elettricist

151654083
1128A: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-244-0872

5110-12-122-2524
Hand Reamer

121222524
513A103SS17-32: RNCC: 3 | RNVC: 2

30 May 1969

5110-27-010-6700
Hand File

270106700
99999-NIIN-DA0037204: RNCC: 2 | RNVC: 1
31999C: RNCC: 2 | RNVC: 1
31999C: RNCC: 5 | RNVC: 2

18 Jun 2002

5110-15-199-0761
Double Bow Cutting Punch

151990761
3703-27: RNCC: 3 | RNVC: 2
C3703-27: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-124-0763
Serie Punzoni

151240763
3683-1-2: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-20-004-4911
Hand Optical Fiber Stripper

200044911
CPTRB-L: RNCC: 3 | RNVC: 2

14 Jan 2009

5110-15-208-4659
Fustella Per Guarni

152084659
3FANGRF025: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-8240
Alesatore

152088240
3AANPERMD27: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-3798
Lima Per Meccanica

151653798
256034: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-521-4217
Hand Metal Stamping Die Set

145214217
292A.6: RNCC: 3 | RNVC: 2

26 Jul 2000

5110-14-370-7464
Hand Metal Cutting Shears

143707464
883A.G: RNCC: 3 | RNVC: 2
883G: RNCC: 5 | RNVC: 2
3148512102519: RNCC: 5 | RNVC: 2

5 Jun 1981

5110-15-216-4900
Levachiodi Grande

152164900
LEVACHIODIGRANDE: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-343-7619
Hand Cable Stripper

123437619
15568106: RNCC: 3 | RNVC: 2
155.681.06: RNCC: 5 | RNVC: 9

23 Jul 1997

5110-22-302-8307

5110-22-302-8975

5110-99-773-2608
Hand Masonry Drill

5110-99-445-9560

5110-22-113-7004

5110-14-270-3969

5110-15-208-5358
Tenaglia

152085358
4TAGFLCNCN300: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-132-4220
Hand Reamer

251324220
64876: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-13-102-8827
Hand File

131028827
NBN496A5-200B2: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-12-300-8652
Hand File

123008652
2123163: RNCC: 3 | RNVC: 2
2415-160-3: RNCC: 3 | RNVC: 2
2123-160-3: RNCC: 5 | RNVC: 2

5 Sep 1984

5110-15-136-0765
Lima Triangolare

151360765
2603-2-6: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-33-155-9579
Firmer Chisel

331559579
119.115/1: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-15-136-2527
Sgorbia Per Scultor

151362527
6072-3-8: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-123-7157
Tronchese Per Elett

151237157
1798/8: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-33-209-0480
Paper Cutter

332090480
913: RNCC: 3 | RNVC: 2
8421411013519: RNCC: 5 | RNVC: 2
977250: RNCC: 5 | RNVC: 2
33S009013: RNCC: 5 | RNVC: 2

26 May 2011

5110-27-014-5888
Hand File

270145888
NF1610: RNCC: 2 | RNVC: 1
NF1610: RNCC: 2 | RNVC: 1

11 Nov 2002

5110-27-000-7990
Hand Cape Chisel

270007990
5010 03 0010: RNCC: 3 | RNVC: 2

7 Jun 1991

5110-27-014-8942
Hand Reamer

270148942
3455ATF16445: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-14-268-6323

5110-25-100-5343

5110-15-217-5487
Scalpelli A Taglio

152175487
EXRI7905134: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-639-6356
Wood Scraper

216396356
0: RNCC: 3 | RNVC: 2
1F116650: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-15-192-8611
Tagliabalsa

151928611
L-18: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-12-127-7378

5110-99-000-5516
Pocket Knife

990005516
8101033: RNCC: 3 | RNVC: 2
OPINEL NO.10 CARBON: RNCC: 5 | RNVC: 2
CK10: RNCC: 5 | RNVC: 2

29 Dec 2009

5110-15-208-4715
Lima Ad Ago Taglio

152084715
3LCNT0CNMDN140: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-210-7757
Lime Per Ferro Picc

152107757
LFERP: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-141-2989

5110-15-216-1598
Pialla Da Falegname

152161598
PIALLA: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-131-4844
Reamer Blade Set

121314844
141.11.400: RNCC: 3 | RNVC: 2
141-11-400: RNCC: 5 | RNVC: 2
200-62HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-13-107-9907
Rigid Handle Machete

131079907
607-5020: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-14-264-4923
Hand Metal Stamping Die Set

142644923
DELA.3231.13: RNCC: 3 | RNVC: 2
4651-15: RNCC: 3 | RNVC: 9
3231-13: RNCC: 5 | RNVC: 9
342-02-15: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-57-440-1889
Hand File

574401889
8AT-9105-10-15: RNCC: 3 | RNVC: 2

3 Nov 2009

5110-66-149-7469
Hand File

661497469
NO PRIMARY REF 66-149-7469: RNCC: 3 | RNVC: 2
07074505: RNCC: 5 | RNVC: 2

8 Apr 2003

5110-99-445-9559

5110-15-209-7662
Fustella

152097662
FUSTELLA: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-235-9512
Raschietto A Tre Ta

152359512
72080001: RNCC: 3 | RNVC: 2
511015E143816: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-234-2952
Serie Lime Ad Ago

152342952
A.57: RNCC: 3 | RNVC: 2

27 Aug 2007

5110-15-161-9963
Wrench

151619963
10.150.09.150.0: RNCC: 3 | RNVC: 2

15 Nov 2000

5110-99-879-5197
Reamerline

998795197
R6Y206/6: RNCC: 3 | RNVC: 2
26DL-96089: RNCC: 6 | RNVC: 9

20 Jun 2002

5110-12-173-5366
Kegel- Fraeser

121735366
636D101-2: RNCC: 3 | RNVC: 9
2230-1-2: RNCC: 5 | RNVC: 9
434-1-2: RNCC: 5 | RNVC: 9

19 Apr 1978

5110-99-911-7100
Hand Cold Chisel

999117100
CB151V: RNCC: 3 | RNVC: 2

12 Mar 1990

5110-99-127-4775
Hand Reamer

991274775
H7: RNCC: 3 | RNVC: 2

29 Jan 1998

5110-15-138-0799
Seghetto Con Lama

151380799
200001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-98-103-2585

5110-15-191-2976
Lama Per Seghetto P

151912976
310: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-98-103-2651

5110-15-190-0018
Cacciavite Con Lama

151900018
6608004,5: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-98-205-5233
Hand File

982055233
DFAMPD00100 B: RNCC: 3 | RNVC: 2

30 Jan 2001

5110-15-208-2658
Alesatore

152082658
3AACPERMFN48-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-098-3141
Hand Diamond Point Chisel

660983141
910: RNCC: 3 | RNVC: 2

28 Jul 1978

5110-98-107-7123
Hand Reamer

981077123
PARALLEL5/16X2X4IN.: RNCC: 3 | RNVC: 2

7 Feb 1984

5110-99-437-5808

5110-99-437-5876

5110-98-205-6477
Hand File

982056477
DFAMPD00272 B: RNCC: 2 | RNVC: 2

27 Jun 2001

5110-22-304-2947

5110-15-123-8008
Forbici A Lame Curv

151238008
208A145: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-509-2766
Pliers

145092766
387.20VSE: RNCC: 3 | RNVC: 2

21 Oct 1998

5110-21-637-5291
Hand Reamer

216375291
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
50-10941: RNCC: 3 | RNVC: 2
GGGR180: RNCC: 4 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1
4500 17-32: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-12-370-9187
Hand Cape Chisel

123709187
321 250 1: RNCC: 3 | RNVC: 2
00.06.26.44: RNCC: 5 | RNVC: 2

16 Jan 2007

5110-15-172-4172
Prussiana Super Ego

151724172
PRUSSIANA SUPER EGO SPAIN MOD.3: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-12-386-2277
Tube Cutter

123862277
5.2010: RNCC: 3 | RNVC: 2

17 Aug 2011

5110-15-123-6228
Punta A Tracciare

151236228
530: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-22-610-1499
Tool Assembly

226101499
4.517.183.600: RNCC: 3 | RNVC: 2

13 Apr 2005

5110-12-309-3534
Hand Reamer

123093534
DIN206-B6,305-HSS: RNCC: 2 | RNVC: 2

19 Jan 1987

5110-12-130-0492
Rectangular Cutting Punch

121300492
148D16: RNCC: 3 | RNVC: 2

30 May 1969

5110-13-103-0030
Firmer Gouge

131030030
MAPLC285: RNCC: 3 | RNVC: 2

31 Mar 1977

5110-15-221-3892
Tagliatubi Per Rame

152213892
TAGLIARAME: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-304-2912

5110-12-129-3890
Hand Reamer

121293890
NO PRIMARY REF 12-129-3890: RNCC: 3 | RNVC: 2
6-5DIN859SCHNELLARBEITSSTAHL: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-264-6124
Hand Masonry Drill

142646124
1112-6: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-27-000-7988
Hand Cape Chisel

270007988
5010 03 0008: RNCC: 3 | RNVC: 2

7 Jun 1991

5110-15-208-5034
Scalpello Da Falegn

152085034
3SANFLCNZ10: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-302-9017

5110-22-302-9016

5110-98-104-7459
Firmer Chisel

981047459
NO PRIMARY REF 98-104-7459: RNCC: 3 | RNVC: 2
5003-1/4IN: RNCC: 5 | RNVC: 2
1A910-4219: RNCC: 5 | RNVC: 2
5110-99-910-4219: RNCC: 6 | RNVC: 9

10 Dec 1973

5110-14-261-3829
Travail Du B Bedane

142613829
28-8: RNCC: 3 | RNVC: 9
C211E08: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-99-433-4488
Hand Reamer

994334488
BS122PT2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
0275-4854: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-37-555-1863
Chisel

375551863
EXP-4: RNCC: 5 | RNVC: 1

22 Mar 2004

5110-21-868-1587
Scissors

218681587
F292: RNCC: 3 | RNVC: 2

17 Nov 1972

5110-22-601-7746
Hand Hacksaw Frame

226017746
8017545: RNCC: 3 | RNVC: 2
208: RNCC: 5 | RNVC: 1
208: RNCC: 5 | RNVC: 2

24 Oct 2002

5110-21-111-7635

5110-21-111-9139

5110-12-371-3700
Hand Metal Cutting Shears

123713700
D206-250: RNCC: 3 | RNVC: 2
00.19.64.24: RNCC: 5 | RNVC: 2

21 Mar 2007

5110-27-001-2851
Flat Washer

270012851
140-009D16H64: RNCC: 3 | RNVC: 2

18 Oct 1994

5110-99-465-6924

5110-12-356-3323
Hand Operated Cable Cutter

123563323
TL5110-0039-004: RNCC: 2 | RNVC: 2
9517500: RNCC: 3 | RNVC: 2
4003773026785: RNCC: 5 | RNVC: 2

14 Feb 2002

5110-21-852-6366
Bolt Cutter Jaws

218526366
603ACC: RNCC: 3 | RNVC: 1
5110-0236: RNCC: 6 | RNVC: 9

1 Dec 1968

5110-99-579-8077
Straight Trimmers Shears

995798077
NO PRIMARY REF 99-579-8077: RNCC: 3 | RNVC: 2
422-5411: RNCC: 5 | RNVC: 2

4 Dec 2008

5110-66-157-1674

5110-22-270-6391

5110-12-303-4257
Hand Valve Seat Rotary Tool

123034257
83010-O/K: RNCC: 3 | RNVC: 9

21 Mar 1985

5110-99-762-9013
Fla Separator Blade

997629013
BLADE FOR-IT2: RNCC: 3 | RNVC: 2
KG-SL/B: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-12-133-4540

5110-27-007-8140
Hand File

270078140
200MM YUVARLAK: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-27-011-5029
Hand File

270115029
10121ME0066: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-14-451-4084
Double Bow Cutting Punch

144514084
245.J2DIAM12: RNCC: 3 | RNVC: 2

19 Nov 1991

5110-99-423-8745
Metal Mar Stamp Set

994238745
NO PRIMARY REF 99-423-8745: RNCC: 3 | RNVC: 2
9084-9: RNCC: 5 | RNVC: 2
566576: RNCC: 6 | RNVC: 9
99-423-8739: RNCC: 6 | RNVC: 9

19 Mar 1990

5110-22-611-1753
Hand File

226111753
4-272-06-3-0: RNCC: 3 | RNVC: 2

5 Aug 2005

5110-33-210-3682
Hand File

332103682
4007-6 BAS: RNCC: 3 | RNVC: 2
ISO 234-1: RNCC: 4 | RNVC: 1
8414299426908: RNCC: 5 | RNVC: 2

25 Sep 2012

5110-14-262-8133
Tariere Torse A Vis

142628133
12-4-42: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-14-553-5591
Hand Optical Fiber Stripper

145535591
JR-25: RNCC: 3 | RNVC: 2
JR-25: RNCC: 5 | RNVC: 2

17 Apr 2007

5110-34-037-2854
Paper Cutter

340372854
CUT-BD-RGG-01(K: RNCC: 5 | RNVC: 2

9 Jan 2009

5110-99-942-0040
Hand Reamer

999420040
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16388: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-755-2179
Nested Saws

997552179
RE100HAC 211/4: RNCC: 3 | RNVC: 2

22 Mar 2006

5110-22-607-3296
Hand File

226073296
1-106-12-1-0: RNCC: 3 | RNVC: 2
8019327: RNCC: 3 | RNVC: 2

8 Jun 2004

5110-99-930-8502
Cutting Chisel

999308502
MC.73.H: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-66-081-2304
Seat Valve Cutter

660812304
678-083607: RNCC: 3 | RNVC: 2
T4591: RNCC: 3 | RNVC: 2

6 Nov 1974

5110-41-000-6743
Bow Saw

410006743
7028-059: RNCC: 3 | RNVC: 2

7 May 2008

5110-14-561-0987
Hand File

145610987
FRC.B300: RNCC: 3 | RNVC: 2
0647800: RNCC: 5 | RNVC: 2
3148516478009: RNCC: 5 | RNVC: 2

15 Jun 2009

5110-12-155-9473
End Cutting Nippers

121559473
M462: RNCC: 3 | RNVC: 2
M462: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-136-3726
Punte Da Centro In

151363726
1365G2: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-37-513-6006

5110-15-221-9747
Cutter

152219747
K2000: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-639-3149
Hand Metal Cutting Shears

216393149
39GP33: RNCC: 4 | RNVC: 1
S47: RNCC: 5 | RNVC: 2

1 Feb 1965

5110-66-146-7943
Hand Hacksaw Frame

661467943
980957: RNCC: 3 | RNVC: 2
00909959: RNCC: 5 | RNVC: 2

9 Aug 2000

5110-15-231-0408
Custodia Per Roncol

152310408
16534 AEP: RNCC: 3 | RNVC: 2
511015E061932: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-216-9583
Coltello Tipo Cutte

152169583
0635: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-616-8247
File Handle

226168247
75054888: RNCC: 3 | RNVC: 2

12 Mar 2008

5110-15-209-5323
Sega Taglia Cornici

152095323
ST550: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-120-0914
Drill Masonry Bit

991200914
H5378: RNCC: 2 | RNVC: 2
FA15429: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-011-5035
Hand File

270115035
10121ME0076: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-15-215-3155
Kit Giraviti Abc

152153155
A1482/9: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-104-2718

5110-14-541-3849
Hand Cable Stripper

145413849
T10280: RNCC: 3 | RNVC: 9

3 Jun 2004

5110-21-639-5662

5110-21-639-6277

5110-21-639-6317

5110-14-250-0454
Hand Round Nose Chisel

142500454
M0B50-140: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-267-4801
Double Bow Cutting Punch

142674801
214-36: RNCC: 3 | RNVC: 2
8018360001: RNCC: 3 | RNVC: 2
4638-36: RNCC: 3 | RNVC: 9
SYQ0836: RNCC: 5 | RNVC: 2
376-36: RNCC: 5 | RNVC: 9
345-11-36: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-99-910-4992
Hand File

999104992
C00RDPATH4020: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9
1A3853: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-5748
Hand Hacksaw Blade

999105748
UKD1SPR0V2110B-H5002: RNCC: 2 | RNVC: 2
H20131: RNCC: 5 | RNVC: 2
SAN 22832A: RNCC: 6 | RNVC: 9
51-11PT7: RNCC: 6 | RNVC: 9
1L61: RNCC: 6 | RNVC: 9
9105748: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-191-6817
Lima Con Manico Mez

151916817
2602/1: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-14-310-4966
Poincon De Rabattag

143104966
568-7-6: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-22-603-7278
Hand File

226037278
LR 12915 NR 2 150MM: RNCC: 3 | RNVC: 2

13 May 2003

5110-21-105-1678
Craftsman's Knife

211051678
3: RNCC: 3 | RNVC: 2
F252-3: RNCC: 5 | RNVC: 9
1F85720: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-14-370-1121
End Cutting Nippers

143701121
390: RNCC: 3 | RNVC: 2
130074: RNCC: 5 | RNVC: 2

18 May 1981

5110-25-120-2932
Single Bit Ax Handle

251202932
610-660MMT0TALLG: RNCC: 5 | RNVC: 1

1 Jan 1984

5110-12-387-4012
Hand Cable Stripper

123874012
6362-TH: RNCC: 3 | RNVC: 2

9 Dec 2011

5110-12-126-2935
Hand File

121262935
2401-180-2: RNCC: 3 | RNVC: 2
2112182: RNCC: 3 | RNVC: 2
2112-180-2: RNCC: 5 | RNVC: 2
B85X2DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-010-6677
Hand File

270106677
99999-NIIN-DA0014071: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-316-2453
Saw Handle

123162453
NO PRIMARY REF 12-316-2453: RNCC: 3 | RNVC: 2
354-20: RNCC: 5 | RNVC: 9
SAEGEGRIFF-354-20: RNCC: 5 | RNVC: 9

4 Jan 1989

5110-15-176-4385
Lama

151764385
ART8659: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-22-621-1169
Hand File

226211169
168-8-4.8-3P: RNCC: 3 | RNVC: 2

30 Jul 2010

5110-12-373-4716
Thread Restorer File

123734716
97-3: RNCC: 3 | RNVC: 2
4021176490491: RNCC: 5 | RNVC: 2

6 Nov 2007

5110-21-639-3970
Single Bit Ax

216393970
39GP3: RNCC: 4 | RNVC: 1
41A1277: RNCC: 5 | RNVC: 2
6150925: RNCC: 5 | RNVC: 2
5110-0019: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-12-140-0248
Hand Cape Chisel

121400248
261-300: RNCC: 3 | RNVC: 2
222-300: RNCC: 3 | RNVC: 2
1560-300: RNCC: 3 | RNVC: 2
01560030021: RNCC: 5 | RNVC: 2
A300DIN6451: RNCC: 5 | RNVC: 9
DIN6451A300: RNCC: 5 | RNVC: 9
15600300: RNCC: 5 | RNVC: 9
DIN6451-A300: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-165-3897
Sgorbia Per Falegna

151653897
5211G6: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-133-1760

5110-14-295-6812

5110-21-105-1214
Hand File

211051214
39GP53: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-15-208-4796
Cavachiodi

152084796
3GANCFSQMA350: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-013-5507
Hand File

660135507
R0UNDFILE: RNCC: 3 | RNVC: 1
07076406: RNCC: 5 | RNVC: 2
07076406: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-12-177-9628
Fraeserfuehrung

121779628
2470-8-9: RNCC: 3 | RNVC: 9

9 Mar 1979

5110-99-122-7461
Hand Reamer

991227461
BS122PT2: RNCC: 4 | RNVC: 1
H02094: RNCC: 5 | RNVC: 2
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-208-5378
Sega

152085378
5NCNFE1000: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-612-4581
Single Bow Cutting Punch

226124581
71514: RNCC: 3 | RNVC: 2

12 Jan 2006

5110-22-607-8932
Single Bit Ax

226078932
11912: RNCC: 3 | RNVC: 2

17 Aug 2004

5110-22-615-9705
Hand Operated Wire Rope Cutter

226159705
519 9005: RNCC: 3 | RNVC: 2

17 Oct 2007

5110-15-215-3995
Tronchese Pastorino

152153995
250AU120: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-618-3691
Tube Cutter

226183691
10539012: RNCC: 3 | RNVC: 2

4 Dec 2008

5110-12-182-6279
Pipe Cutter

121826279
000589122800: RNCC: 3 | RNVC: 2
41040457: RNCC: 3 | RNVC: 2

20 Feb 1980

5110-21-840-0088
Hand Reamer

218400088
NO PRIMARY REF 21-840-0088: RNCC: 3 | RNVC: 2

26 Mar 1965

5110-15-233-0737
Scalpello

152330737
1.18.544: RNCC: 3 | RNVC: 2
CAMO-214125: RNCC: 3 | RNVC: 2
PI-013-45: RNCC: 3 | RNVC: 2
511015E030477: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-25-112-5394

5110-15-191-7158
Sbavatore Manuale P

151917158
04-K-380: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-27-000-7996
Hand Cape Chisel

270007996
5010 03 0024: RNCC: 3 | RNVC: 2

7 Jun 1991

5110-27-011-7729
Hand Reamer

270117729
10111KR5029: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-310-4962
Poincon De Rabattag

143104962
568-7-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-14-262-8131
Tariere Torse A Vis

142628131
12-4-38: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-134-4243
Sega Ad Arco

151344243
5559-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-136-2428
Sega Per Caviglie

151362428
5486: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-397-4875
Calibre De Fraisage

143974875
73140000: RNCC: 3 | RNVC: 2

14 Dec 1984

5110-21-105-2488
Hand Metal Cutting Shears

211052488
010: RNCC: 3 | RNVC: 2
39GP33: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-15-208-2614
Scalpello Da Murato

152082614
3SANMRPJZ380X23: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-149-8125
Pipe Cutter

661498125
NO PRIMARY REF 66-149-8125: RNCC: 3 | RNVC: 2
07048007: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-12-148-6022
Reamer Blade Set

121486022
NO PRIMARY REF 12-148-6022: RNCC: 3 | RNVC: 2
101591: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-786-2731
Wire Wrapping Tool

997862731
WSU 30M: RNCC: 3 | RNVC: 2
605-239: RNCC: 5 | RNVC: 2
97002C: RNCC: 5 | RNVC: 2
992559204: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-150-3285
Diagonal Cutting Pliers

661503285
NO PRIMARY REF 66-150-3285: RNCC: 3 | RNVC: 2
04390957: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-99-910-5781
Crosscut Hand Saw

999105781
DEFSTAN51-11 PART 24: RNCC: 4 | RNVC: 1
1C2146: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
DL9A-H2187: RNCC: 6 | RNVC: 9
H2187: RNCC: 6 | RNVC: 9
FA16666: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-855-3507
File Handle

218553507
2STR0NGH0LDFILEHANDLE: RNCC: 3 | RNVC: 2
5110-0767: RNCC: 6 | RNVC: 9

19 Sep 1969

5110-21-815-1814

5110-15-217-8080
Butteruolo

152178080
ST-2331: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-27-010-7980
Double Bit Ax

270107980
99999-NIIN-DA0026893: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-216-9386
Fresa Sedi X Rubine

152169386
00316: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-3684
Sega A Dorso Manico

151653684
5472250: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-264-9027

5110-99-845-1450

5110-12-362-3793
Hand Hacksaw Frame

123623793
T0836A: RNCC: 3 | RNVC: 2

13 Feb 2004

5110-15-208-2651
Alesatore

152082651
3AAWFCCNFQ27-6: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-209-6876
Scalpello A Vanghet

152096876
245295: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-124-0312
Confezione Lame

151240312
8422: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-136-1278
Punta Per Tracciare

151361278
4811: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-98-203-1617
Hand Reamer Set

982031617
NZCES 538: RNCC: 3 | RNVC: 2

12 Jun 1989

5110-15-136-0838
Tronchese

151360838
1082MQ160: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-98-205-3878
Hand File

982053878
DFAMPD00078/JOINT: RNCC: 2 | RNVC: 2
DFAMPD00078/F: RNCC: 3 | RNVC: 2

29 Jun 2000

5110-12-133-3222
Hand Reamer

121333222
DIN206-B3,2-HSS: RNCC: 2 | RNVC: 2
413-3,20: RNCC: 3 | RNVC: 2
11602032: RNCC: 3 | RNVC: 2
010011-3,2: RNCC: 3 | RNVC: 2
3-2DIN206SSSPIRALGENUTET: RNCC: 5 | RNVC: 9

30 May 1969

5110-17-029-6917
Hand Reamer

170296917
K24-27,5: RNCC: 3 | RNVC: 2
K24-27,5: RNCC: 5 | RNVC: 9
K24-27-5: RNCC: 6 | RNVC: 9
K24T0T27-5: RNCC: 6 | RNVC: 9

15 May 1970

5110-21-805-5970
Jeweler's Saw Blade

218055970
SW630: RNCC: 3 | RNVC: 1
4534: RNCC: 5 | RNVC: 1

16 Aug 1967

5110-98-205-5370
Hand File

982055370
DFAMPD00101 D: RNCC: 2 | RNVC: 2

5 Mar 2001

5110-15-221-2539
Serie Fustelle

152212539
SERIEFUSTELLE-A: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-639-5643
Hand Metal Cutting Punch And Die Set

216395643
5: RNCC: 3 | RNVC: 1
310050219: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-99-434-7273

5110-15-208-3151
Alesatore

152083151
3AAXFCFRDP12-25: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-003-0136
Electricians' Scissors

150030136
5120-10546: RNCC: 3 | RNVC: 2
(241)A59645120-10546: RNCC: 5 | RNVC: 2

24 Oct 2013

5110-14-459-0298
Diagonal Cutting Pliers

144590298
192.14EG: RNCC: 3 | RNVC: 2
3148511444306: RNCC: 5 | RNVC: 2
0714 01 51: RNCC: 5 | RNVC: 2
192-14EG: RNCC: 5 | RNVC: 2
192.14 EG: RNCC: 5 | RNVC: 2
0144430: RNCC: 5 | RNVC: 9

14 Nov 1992

5110-99-423-8732
Metal Mar Stamp Set

994238732
NO PRIMARY REF 99-423-8732: RNCC: 3 | RNVC: 2
9084-12: RNCC: 5 | RNVC: 2
566017: RNCC: 6 | RNVC: 9

23 Feb 1978

5110-15-218-2374
Lima Piatta Per All

152182374
ART24-10: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-109-4767

5110-12-368-9875
Double Bow Cutting Punch

123689875
0100730: RNCC: 3 | RNVC: 2
00.09.58.85: RNCC: 5 | RNVC: 2

10 May 2006

5110-99-726-3760
Hand Reamer

997263760
631375: RNCC: 3 | RNVC: 2

28 Jan 1986

5110-22-612-4690
Exposed Blade Tube Deburring Tool

226124690
221268: RNCC: 3 | RNVC: 2

13 Jan 2005

5110-12-385-4157
Straight Trimmers Shears

123854157
53.000.001: RNCC: 3 | RNVC: 2
53.000.001: RNCC: 5 | RNVC: 2

31 May 2011

5110-99-356-7157
Eart Distance Strip

993567157
MC1275055: RNCC: 3 | RNVC: 2

30 Aug 2002

5110-15-183-2695
Lima Taglio Mezzodo

151832695
1919A/Q: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-22-221-3610
Slet Roemfil

222213610
111F/4: RNCC: 3 | RNVC: 2

1 Jan 1963

5110-15-220-6325
Forbice Facom

152206325
841.6: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-364-4039
Pipe Cutter

123644039
150/3: RNCC: 3 | RNVC: 2
60020003: RNCC: 5 | RNVC: 2

22 Sep 2004

5110-22-303-5299

5110-15-218-2347
Spazzola A Pennello

152182347
PBU3029/6: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-214-7160
Curvatubi

152147160
2155-4-12: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-814-1239
Die Dimpling Body

218141239
ZT185301-5/32: RNCC: 3 | RNVC: 2
ZT185301-5-32: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-17-026-8975
Hand File

170268975
TVA5110-2-263-007.1.1.12: RNCC: 3 | RNVC: 2
TVA5110-2-263-007: RNCC: 5 | RNVC: 1

17 Jun 1972

5110-14-310-4944
Socle Decoupage

143104944
568-5-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-33-156-6041
Hand Metal Cutting Shears

331566041
903.030: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-14-271-6026
A Main Lime

5110-23-113-9203
1 Axe With Handle

231139203
59700031: RNCC: 3 | RNVC: 2

12 Jun 2004

5110-25-146-8785
Knife Blade

251468785
3180-621-9: RNCC: 5 | RNVC: 2

28 Jan 1997

5110-15-213-6523
Scalpello Da Mm.4 P

152136523
3-16-532: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-132-9156
Lamelle Pulisci Con

151329156
AWWZ52GZA162: RNCC: 3 | RNVC: 2
AWWZ52GZA162: RNCC: 5 | RNVC: 2
AWWZ52GZA162: RNCC: 5 | RNVC: 9

9 Oct 1996

5110-21-883-1797
Hand File

218831797
39GP30: RNCC: 4 | RNVC: 1

27 Jan 1981

5110-15-234-4073
Tronchesino Diagona

152344073
UT 101: RNCC: 3 | RNVC: 2

27 Aug 2007

5110-27-010-6548
Hand File

270106548
99999-NIIN-DA0014092: RNCC: 2 | RNVC: 1
31982C: RNCC: 2 | RNVC: 1
31982C: RNCC: 5 | RNVC: 2

21 Jun 2002

5110-15-199-0766
Double Bow Cutting Punch

151990766
3703-32: RNCC: 3 | RNVC: 2
C3703-32: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-26-300-6271
Pliers

263006271
55030-4320: RNCC: 3 | RNVC: 2

22 Apr 2008

5110-99-553-1504
Cabl Stripping Tool

5110-15-190-3654
Trivello Con Anello

151903654
3UANAACL8: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-21-639-4824
File Handle

216394824
2: RNCC: 3 | RNVC: 2
2: RNCC: 3 | RNVC: 2
45FH: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-15-172-7951
Tagliabulloni Lama

151727951
TAGLIABULLONI LAMA ACCIAIO TAGLI: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-165-3905
Barretta Per Inciso

151653905
950628: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-25-121-5376
Hand Cable Stripper

251215376
LA5386: RNCC: 3 | RNVC: 1
LE772: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-99-120-0879
Bolt Cutter

991200879
930F: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
308271: RNCC: 5 | RNVC: 2
FA11503: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
DL9A-H513: RNCC: 6 | RNVC: 9
H513: RNCC: 6 | RNVC: 9
H513: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-014-6652
Hand Reamer

270146652
07002YR0067: RNCC: 2 | RNVC: 1

14 Nov 2002

5110-27-015-5547
Hand File

270155547
14001Y021639: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-27-011-5043
Hand File

270115043
10121ME0089: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-27-026-2855
Plumber's Saw Blade

270262855
DA0037578: RNCC: 2 | RNVC: 1
TESTERE, 25X315 MM: RNCC: 2 | RNVC: 1

27 Jun 2005

5110-14-461-6457
End Cutting Nippers

144616457
115360: RNCC: 3 | RNVC: 2

19 Mar 1993

5110-15-127-2602
Portalime

151272602
2626: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-13-103-4650
File Handle

131034650
6125-90: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-12-130-0493
Rectangular Cutting Punch

121300493
148D14: RNCC: 3 | RNVC: 2

30 May 1969

5110-27-019-4361
Hand File

270194361
10091KEGE0028: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-27-011-6659
Hand File

270116659
09013YE1256: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-310-7022
Lame Superieure

143107022
935860-3: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-221-9290
Scalpello Per Legno

152219290
1031-18: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-230-8368
Troncabulloni A Tag

152308368
196 NR: RNCC: 3 | RNVC: 2
511015E153741: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-054-1386
Bucksaw

150541386
56-5-575-700: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-232-3525
Cacciaspine

152323525
536/200: RNCC: 3 | RNVC: 2
511015E081528: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-14-300-3834

5110-12-126-1241
Hand File

121261241
DIN7261-B150-2: RNCC: 2 | RNVC: 2
3122152: RNCC: 3 | RNVC: 2
1122-150-2: RNCC: 3 | RNVC: 2
B150-2DIN7261: RNCC: 5 | RNVC: 2
C150X2DIN8333: RNCC: 5 | RNVC: 9
1126-150-2: RNCC: 5 | RNVC: 9
DIN7261B150-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-204-8161
Chisel And Gouge Handle

142048161
E73-202-144: RNCC: 2 | RNVC: 2

1 Jan 1963

5110-98-107-6981
Hand Reamer

981076981
TAPER SPIRAL 3/32IN: RNCC: 3 | RNVC: 2

2 Feb 1984

5110-27-010-6707
Hand File

270106707
99999-NIIN-DA0037235: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-27-010-6646
Hand File

270106646
99999-NIIN-DA0037101: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-21-857-8862
Hand File

218578862
5110-0405: RNCC: 3 | RNVC: 2

12 Mar 1970

5110-12-126-1896
Cutting Punch Insert

121261896
TL5110-0033-B10: RNCC: 2 | RNVC: 2
8700: RNCC: 3 | RNVC: 2
1700: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-132-6966
Lima Doppia Curva P

151326966
2654-190-3: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-27-011-7675
Hand Reamer

270117675
09013KR1079: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-186-9190
Diagonal Cutting Pliers

151869190
TR25PD: RNCC: 3 | RNVC: 2

5 Jan 2009

5110-33-156-6042
Hand Metal Cutting Shears

331566042
905.026: RNCC: 3 | RNVC: 2

23 Feb 1994

5110-14-526-7550
Hand Optical Fiber Stripper

145267550
CT450391: RNCC: 3 | RNVC: 2

3 Sep 2001

5110-14-431-7018
Hand Metal Cutting Shears

144317018
C17: RNCC: 3 | RNVC: 9

28 Apr 1989

5110-15-188-2154
Hand Operated Wire Rope Cutter

151882154
AV40S: RNCC: 3 | RNVC: 2
(241)AD003AV40S: RNCC: 5 | RNVC: 2

7 Aug 2009

5110-15-173-1370
Cesoia Sinistrozza

151731370
1124000: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-165-4313
Troncabulloni

151654313
195380: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-110-5411
Scissors

151105411
204-250: RNCC: 3 | RNVC: 2

7 Sep 1989

5110-21-870-2703
End Cutting Nippers

218702703
284BSG: RNCC: 3 | RNVC: 2
42G: RNCC: 5 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

28 Jan 1975

5110-22-607-1162
Exposed Blade Tube Deburring Tool

226071162
221274: RNCC: 3 | RNVC: 2

6 May 2004

5110-15-218-9183
Tronchese Mm 130

152189183
660761130: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-100-0920
Bolt Cutter

221000920
72-4200-36: RNCC: 3 | RNVC: 2
1559S-36: RNCC: 5 | RNVC: 2
12.9: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-33-208-3543
Hand File

332083543
0904.01220: RNCC: 3 | RNVC: 2
350.572: RNCC: 3 | RNVC: 2
4006-12 ENT: RNCC: 3 | RNVC: 2
ISO 234-1: RNCC: 4 | RNVC: 1
8414299425307: RNCC: 5 | RNVC: 2

21 Apr 2010

5110-15-165-4028
Seghetto Per Metall

151654028
2762332: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4044
Scalpello Per Mecca

151654044
36024250: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-17-700-9927
Firmer Gouge

177009927
1512.06: RNCC: 3 | RNVC: 2

18 May 1971

5110-15-193-2809
Attrezzo Multiuso

151932809
B66: RNCC: 3 | RNVC: 2
(241)AG180B66: RNCC: 5 | RNVC: 2

27 Apr 2010

5110-14-244-0916

5110-12-341-7665
End Cutting Nippers

123417665
608-711: RNCC: 3 | RNVC: 2

24 Oct 1996

5110-15-221-1234
Serie D Cacciavite

152211234
77160050: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-120-2177
Hand Reamer

991202177
BS3088: RNCC: 4 | RNVC: 1
H20735: RNCC: 5 | RNVC: 2
HY: RNCC: 5 | RNVC: 2
DEFSTAN51-9: RNCC: 6 | RNVC: 9
0275-16534: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-895-4296
Craftsmans Kn Blade

218954296
SL2: RNCC: 3 | RNVC: 2
AB: RNCC: 6 | RNVC: 9

11 Mar 1984

5110-12-169-2960
Hand Reamer

121692960
1000025-712000: RNCC: 2 | RNVC: 2
1000025-712000: RNCC: 3 | RNVC: 2
1000025-712000: RNCC: 5 | RNVC: 9

4 May 1977

5110-15-221-4732
Alesatore

152214732
EX5110RI7421742: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-244-3685

5110-15-216-2829
Chiave Bussola

152162829
720-22: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-13-103-3242
Hand Reamer

131033242
7280-21: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-14-204-9254
Craftsman's Knife

142049254
NO PRIMARY REF14-204-9254: RNCC: 3 | RNVC: 2
1013ADR0ITE: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-27-014-2097
Pliers

270142097
3020 46 5200: RNCC: 2 | RNVC: 1
1013100000: RNCC: 2 | RNVC: 1
8245RL-200JC: RNCC: 2 | RNVC: 1

25 Sep 2002

5110-99-135-5627
M Punch And Die Set

991355627
NO PRIMARY REF 99-135-5627: RNCC: 3 | RNVC: 2
H6682: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-17-700-9760
Woodworking Butt Chisel

177009760
3010: RNCC: 3 | RNVC: 1
1172.26: RNCC: 3 | RNVC: 2
3010 1: RNCC: 5 | RNVC: 9
326-1: RNCC: 5 | RNVC: 9
41C1497: RNCC: 5 | RNVC: 9

15 May 1970

5110-17-110-8549
Schuin Snyden Tang

171108549
578D: RNCC: 3 | RNVC: 2

22 Apr 1997

5110-25-101-0781
Hand Cold Chisel

5110-21-109-4764
Expansion Rea Pilot

211094764
87955: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-126-9462
Forbici

151269462
ZA211: RNCC: 3 | RNVC: 2
ZA211: RNCC: 5 | RNVC: 2
ZA211: RNCC: 5 | RNVC: 9

8 Oct 1996

5110-15-236-7351
Pinza Spellacavo Co

152367351
113-49F: RNCC: 3 | RNVC: 2
511015E091236: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-199-0975
Gimlet

151990975
1378-3: RNCC: 3 | RNVC: 2

12 Jan 2005

5110-15-208-4707
Lima

152084707
3LCNC0CNBSN150: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-41-000-8575
Pocket Folding Multi-Tool

410008575
614 20 218: RNCC: 3 | RNVC: 2

9 Jan 2009

5110-21-639-5185
Hand Cold Chisel

216395185
86A7/16X12: RNCC: 3 | RNVC: 2
39GP43: RNCC: 4 | RNVC: 1
REVA: RNCC: 6 | RNVC: 9

26 Jun 1964

Load More Results