What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 81 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 81of 112

5110-17-115-7055
Rectangular Cutting Punch

171157055
1370400: RNCC: 3 | RNVC: 2

22 May 2003

5110-20-004-7591
Hand File

200047591
FHRB10: RNCC: 3 | RNVC: 2

20 Apr 2009

5110-15-184-7370
Forbici

151847370
4FABCN250: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-98-853-7998
Special Repair Tool

988537998
TL3193: RNCC: 3 | RNVC: 2

8 Mar 1979

5110-25-103-9123

5110-12-369-4162
Knockout Punch And Die Set

123694162
109003K: RNCC: 3 | RNVC: 2

30 Jun 2006

5110-21-105-2049
Single Bow Cutting Punch

211052049
148: RNCC: 3 | RNVC: 1
GGGP831: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-99-428-7602
Chisel And Gouge Handle

994287602
BS1943: RNCC: 4 | RNVC: 1
F1FA14370: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-801-0775
End Cutting Nippers

218010775
39GP16: RNCC: 4 | RNVC: 1
20301: RNCC: 5 | RNVC: 2
REVC: RNCC: 6 | RNVC: 9

9 Jun 1964

5110-33-103-9405
Straight Trimmers Shears

331039405
697.607: RNCC: 3 | RNVC: 2

23 Jun 1995

5110-15-208-4508
Alesatore 'Francese

152084508
3AAEFCFRDP4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-910-9993
Hand Reamer

999109993
BS122PT2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
9/64"PARALLEL HAND REAMER: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-190-6456
Hand File

121906456
2408-140-1: RNCC: 3 | RNVC: 2
2142141: RNCC: 3 | RNVC: 2
2142-140-1: RNCC: 3 | RNVC: 9
BC547B: RNCC: 5 | RNVC: 2

7 Dec 1981

5110-99-428-9648
Hand Reamer

994289648
BS122: RNCC: 4 | RNVC: 1
F1FA16352: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-165-3790
Tronchese Per Macca

151653790
1807200: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-22-600-4868
Hand Metal Cutting Shears

4 Jul 2002

5110-14-574-3664
Brick Chisel

145743664
7105300201: RNCC: 3 | RNVC: 2

14 Jan 2013

5110-14-335-6248
Lime-Scie

5110-14-287-8399

5110-15-161-9693
Paranco Di Sollevam

151619693
13.90: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-15-208-4693
Lima

152084693
3LCN0VCNBSN300: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4526
Alesatore

152084526
3AARPERMDQ23: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-149-9388
Craftsman's Knife

661499388
NO PRIMARY REF 66-149-9388: RNCC: 3 | RNVC: 2
00546040: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-22-115-3392

5110-21-859-0552
Hand Hacksaw Blade

218590552
31E1024: RNCC: 3 | RNVC: 2

14 May 1970

5110-15-132-5198
Dopp Lamiera Cesoia

151325198
R708G: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-639-4134
Hand File

216394134
39GP53: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-66-150-8854
Hand Graver

661508854
BATENG: RNCC: 3 | RNVC: 2

5 Sep 2003

5110-21-639-4842
Hand File

216394842
39GP53: RNCC: 4 | RNVC: 1

29 Oct 1963

5110-99-440-4334
Engraving Cutter

994404334
C21443: RNCC: 3 | RNVC: 2
W4WDTL110-862: RNCC: 6 | RNVC: 9

1 Mar 1977

5110-66-149-8119
Bolt Cutter

661498119
NO PRIMARY REF 66-149-8119: RNCC: 3 | RNVC: 2
05538001: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-98-104-1203
Hand Hacksaw Blade

981041203
300MM-18 BI-METAL: RNCC: 3 | RNVC: 2
FH1218 ECLIPSE HICUT: RNCC: 6 | RNVC: 9

1 Jun 1990

5110-21-889-5307
Dielectric Ca Knife

218895307
TD487R: RNCC: 3 | RNVC: 2

9 May 1982

5110-15-004-9145
Raschietto

150049145
63903165013: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-15-216-5455
Pialletto In Ghisa

152165455
ABC5746: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-244-0842

5110-15-183-4642
Coltello

151834642
663A: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-19-005-0947
Single Bit Ax

190050947
33870035: RNCC: 3 | RNVC: 2

30 Nov 2012

5110-66-017-2405
Hand File

660172405
905258: RNCC: 3 | RNVC: 2
HALFR0UNDFILE: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-21-870-0791
Dielectric Trim Jig

218700791
KTD117: RNCC: 3 | RNVC: 2

16 Aug 1973

5110-14-336-5412

5110-98-107-5984
Hand File

981075984
300MM,THREE SQUARE,BASTARD: RNCC: 5 | RNVC: 9

3 Nov 1983

5110-15-134-4433
Legno Denti Me Lama

151344433
40101: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-139-8064
Seghetto Lama

151398064
1001953: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-122-2537
Hand Reamer

121222537
513A103SS27-32: RNCC: 3 | RNVC: 2

30 May 1969

5110-27-013-2141
Single Bow Cutting Punch

270132141
570-33: RNCC: 2 | RNVC: 1

15 May 2002

5110-21-872-0465
Applicator And Scre

218720465
A18080: RNCC: 3 | RNVC: 2

22 Apr 1975

5110-21-840-9645
Knockout Punch And Die

218409645
730: RNCC: 3 | RNVC: 1
GGGP836: RNCC: 4 | RNVC: 1

26 Oct 1965

5110-14-295-6806

5110-15-215-3996
Pinza Becchi Piatti

152153996
280A0002: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-136-0766
Lima Triang.Lungh.8

151360766
2603-1-8: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-12-126-1666

5110-15-209-1035
Serie Punte

152091035
233PC: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-809-1888
Hand Metal Cutting Shears

218091888
39GP33: RNCC: 3 | RNVC: 2

9 Nov 1968

5110-22-613-8785
Cable Stripper Blade

226138785
5703484940002: RNCC: 3 | RNVC: 2
MC300: RNCC: 3 | RNVC: 2
2997100969: RNCC: 5 | RNVC: 2

18 Aug 2006

5110-12-010-5207

5110-12-156-3220

5110-14-244-3673

5110-13-103-0792
Jointer Plane

131030792
B12LUXE46: RNCC: 3 | RNVC: 9

1 Apr 1975

5110-15-216-3680
Ago Con Impugnetura

152163680
0330230: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-149-7490
Hand File

661497490
NO PRIMARY REF 66-149-7490: RNCC: 3 | RNVC: 2
07080201: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-99-910-5901
Pipe Cutter Cutting Wheel

999105901
DEF STAN 51-11 (PART 25): RNCC: 4 | RNVC: 1
DEFSTAN51-11PT25: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4912
Hand File

999104912
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
9104912: RNCC: 6 | RNVC: 9
FA13447: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-153-2065
Freisenker Fraeser

121532065
CH279-23FE: RNCC: 3 | RNVC: 2
1201 9475: RNCC: 5 | RNVC: 2
CH279-23FE: RNCC: 5 | RNVC: 9
A26-50-127: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-312-4156
Diagonal Cutting Pliers

123124156
E3357-DF: RNCC: 3 | RNVC: 2

30 Dec 1987

5110-98-203-0144
Scraping Knife

5110-33-102-2101

5110-17-055-7125
Cable Cutter

170557125
KL1485: RNCC: 3 | RNVC: 2

23 Apr 1985

5110-15-175-6016
Chiave Speciale Cro

151756016
MM65XDIAM. MM27: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-14-250-8359

5110-27-007-8138
Hand File

270078138
150MM KARE: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-27-019-4748
Hand File

270194748
10091KEGE0050: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-33-005-4271
Bent Trimmers Shears

330054271
326: RNCC: 3 | RNVC: 2

23 Jul 2001

5110-27-011-7736
Hand Reamer

270117736
10111KR5063: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-208-7751
Alesatore

152087751
3AANGERMDN27-5X31: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-27-010-6681
Hand File

270106681
99999-NIIN-DA0014067: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-910-5020
Hand File

999105020
COORDPATH4062: RNCC: 2 | RNVC: 2
H00974: RNCC: 5 | RNVC: 2
FA13435: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-184-7316
Ferro Semplice Per

151847316
3IANSRSE46: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-190-3552
Foretto

151903552
3NANLEFTNNNP300: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-21-885-2566
Tube Cutter Cutting Wheel

218852566
E-2191: RNCC: 3 | RNVC: 2

28 Jul 1981

5110-21-639-6370
Scraper Blade

216396370
25: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-27-011-7731
Hand Reamer

270117731
10111KR5032: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-27-011-7694
Hand Reamer

270117694
09013KR1058: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-321-1686
Handbeta Aufreiber

123211686
607: RNCC: 3 | RNVC: 9
4010886652282: RNCC: 5 | RNVC: 2
6522880: RNCC: 5 | RNVC: 2

6 Apr 1990

5110-99-962-9015
Magazine Knife

999629015
NO PRIMARY REF 99-962-9015: RNCC: 3 | RNVC: 2
N0D1545: RNCC: 3 | RNVC: 2
410772: RNCC: 6 | RNVC: 9

27 Oct 1987

5110-66-150-2188
Hand Diamond Point Chisel

661502188
NO PRIMARY REF 66-150-2188: RNCC: 3 | RNVC: 2
07136809: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-230-6977
Utensile Per Prefil

152306977
A40023245: RNCC: 3 | RNVC: 2
511015E131128: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-208-2571
Pialla

152082571
5PLELUDL750X68V: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-98-205-9641
Hand File

982059641
DFAMPD03220: RNCC: 2 | RNVC: 2

27 Nov 2003

5110-99-469-4906

5110-15-184-7318
Ferro Semplice Per

151847318
3IANSRSE42: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-17-042-7832
Hand File

170427832
12501002: RNCC: 3 | RNVC: 2

22 Jul 1973

5110-15-184-6416
Lima

151846416
NSN511015R520548: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-17-701-5683
Hand File

177015683
3666: RNCC: 3 | RNVC: 2

14 May 1970

5110-12-126-2029
Hand Reamer

121262029
111.19.000: RNCC: 3 | RNVC: 2
111-19-000: RNCC: 5 | RNVC: 2
600-6HC: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-104-1007
Lima

151041007
2/20671-13.03.73-01-US-A: RNCC: 3 | RNVC: 2

30 May 1989

5110-15-172-7182
Spingipezzuola 50 M

151727182
SPINGIPEZZUOLA 50 MM.KLEEN BORE: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-17-003-0491
Compass Saw

170030491
9: RNCC: 3 | RNVC: 2
41B1121: RNCC: 6 | RNVC: 9

17 Jun 1972

5110-15-208-3145
Alesatore

152083145
3AAXFCFRDP4-4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-782-2968
Hand File

997822968
057100: RNCC: 3 | RNVC: 2

11 Sep 1987

5110-99-782-2092
Hand Hacksaw Blade

997822092
HHB-PROG: RNCC: 3 | RNVC: 2
H00047: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-14-244-3659

5110-15-209-0611
Tenaglioli Di Preci

152090611
306A: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-37-513-4856

5110-17-003-3617
Frees

5110-37-513-8629

5110-25-102-1256

5110-27-019-4743
Hand File

270194743
10091KEGE0035: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-570-8965
Hand Cable Stripper

145708965
370-2: RNCC: 3 | RNVC: 2

1 Feb 2012

5110-99-942-0110
Hand Reamer

999420110
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
22MM PARALLEL HAND REAMER: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-942-0021
Hand Reamer

999420021
BS122 PART 2: RNCC: 4 | RNVC: 1
02-5373: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-810-1620
Hand Reamer

998101620
FV669109: RNCC: 3 | RNVC: 2
RH7260: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-17-007-2795
Hand File

170072795
TS5110-0774-8IN: RNCC: 3 | RNVC: 2
TS5110-0774: RNCC: 5 | RNVC: 1
11000800: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-22-221-4080
Wood File Handle

222214080
73-0572-3: RNCC: 3 | RNVC: 2

18 Jan 1972

5110-27-014-1976
Diagonal Cutting Pliers

270141976
04021304552: RNCC: 2 | RNVC: 1

24 Sep 2002

5110-15-209-7057
Spatola Manicata Mm

152097057
ART.4896(MM30): RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-052-2441
Utensile Con Mandri

150522441
2100-2200N2642: RNCC: 3 | RNVC: 2

15 Jun 1971

5110-99-865-5003
Hand Reamer

998655003
FV143189: RNCC: 3 | RNVC: 2
RE17951: RNCC: 5 | RNVC: 2
LV10FV143189: RNCC: 6 | RNVC: 9
16C6083: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-208-2616
Alesatore

152082616
3AANFCFMEQ40: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-074-6258
Handle File Wood

150746258
140ART34700: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-212-4249
Cesoia Taglialamier

152124249
540A: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-370-9519
Hand Operated Cable Cutter

123709519
9511500: RNCC: 3 | RNVC: 2
4003773026778: RNCC: 5 | RNVC: 2

19 Jan 2007

5110-21-104-9998
Steel Strapping Cutter

211049998
1290G: RNCC: 3 | RNVC: 2
10: RNCC: 3 | RNVC: 2
GGGC835: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-17-701-3808
Draw Knife

177013808
78385: RNCC: 3 | RNVC: 2
41K351: RNCC: 6 | RNVC: 9

16 May 1970

5110-99-122-9845

5110-12-375-0500
Gla Schneidradsatz

123750500
EIC124T: RNCC: 3 | RNVC: 2

16 Apr 2008

5110-15-235-9422
Raschietto Guarnizi

152359422
12718: RNCC: 3 | RNVC: 2
511015E126971: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-22-304-0489

5110-14-204-9385

5110-14-266-7028

5110-66-038-5420
Hand File

660385420
912051: RNCC: 3 | RNVC: 2
07077308: RNCC: 5 | RNVC: 2
07077308: RNCC: 5 | RNVC: 2
912051: RNCC: 5 | RNVC: 2
R0UNDFILE: RNCC: 5 | RNVC: 9

5 Feb 1971

5110-66-013-5566
Hand File

660135566
WARDINGFILE: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-15-208-4651
Fustella Per Guarni

152084651
3FANGRF017: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-604-3990
Eye End Gland Tool

996043990
MC1276040: RNCC: 3 | RNVC: 2

16 May 2002

5110-15-184-7340
Bedano Da Falegname

151847340
3QANFLM3: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-43-001-3334
Restraint In Cutter

430013334
OP-00: RNCC: 3 | RNVC: 2
1223: RNCC: 5 | RNVC: 2
5110PL0435841: RNCC: 6 | RNVC: 9

21 Mar 2012

5110-40-000-8180
Knife Blade

400008180
BNKV-2: RNCC: 3 | RNVC: 2

4 Dec 2008

5110-15-220-3552
Scalpelli Per Legno

152203552
1.46.30.06: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-603-7261
Hand File

226037261
LA 2402 HIEB 2 160MM: RNCC: 3 | RNVC: 2

13 May 2003

5110-15-208-4568
Alesatore

152084568
3AARFCFMEQ8-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-603-7275
Hand File

226037275
LR 12900 NR 2 150MM: RNCC: 3 | RNVC: 2

13 May 2003

5110-15-208-5323
Pettine Filettare M

152085323
4PINDC12X1-75: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-490-8827
Alesoir

144908827
4067 010 000 290: RNCC: 3 | RNVC: 2
F300 0T 000 5099: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-22-221-4227

5110-22-221-3703

5110-21-104-9842
Thonging Chisel

211049842
493: RNCC: 3 | RNVC: 1
1F105370: RNCC: D | RNVC: 9

6 Jun 1968

5110-15-000-3909
Cable Stripper Blade

150003909
UTAV6499: RNCC: 3 | RNVC: 2

27 Feb 2013

5110-27-011-6672
Hand File

270116672
09013KE1024: RNCC: 2 | RNVC: 1
60212001: RNCC: 2 | RNVC: 1
60212001: RNCC: 5 | RNVC: 2

18 Jun 2002

5110-13-118-0048
Firmer Chisel

131180048
424P-8: RNCC: 3 | RNVC: 2
00.07.05.26: RNCC: 5 | RNVC: 2
7311518238308: RNCC: 5 | RNVC: 2

8 Nov 2000

5110-57-441-1793
Hand File

574411793
2822-0024 GOST 1465-80: RNCC: 2 | RNVC: 2
2822-0024 GOST 1465-80: RNCC: 3 | RNVC: 2

28 Nov 2012

5110-22-619-5509
Tube Cutter

226195509
2566120: RNCC: 3 | RNVC: 2

5 Aug 2009

5110-14-226-0537

5110-15-192-8384
Scalpello Sds Largo

151928384
P16265: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-15-182-6737
Sega Carp. Ad Arco

151826737
SEGACARPENTIERE: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-142-9251
Half-Round File

151429251
1719-250: RNCC: 3 | RNVC: 2

22 Oct 1996

5110-99-463-2395
Scissors

994632395
NO PRIMARY REF 99-463-2395: RNCC: 3 | RNVC: 2
0451-3524: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-13-104-4806
File Hand Rd

131044806
30413254700080: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-66-161-2518
Hand Reamer

661612518
UCT 130188 2001: RNCC: 3 | RNVC: 2

7 Aug 2013

5110-14-528-0622
Hand Cable Stripper

145280622
F780025000: RNCC: 3 | RNVC: 2
3598412000338: RNCC: 5 | RNVC: 2

12 Dec 2001

5110-15-154-6202
Hand Optical Fiber Cleaving Tool

151546202
P830206: RNCC: 3 | RNVC: 2

27 Jul 2001

5110-66-120-4956
Hand Reamer

661204956
ADJUSTABLE REAMER: RNCC: 3 | RNVC: 1
653 0102: RNCC: 3 | RNVC: 2
MD: RNCC: 5 | RNVC: 9

9 Jun 1984

5110-15-001-5068
Lima Per Carrozzier

150015068
MTSB2: RNCC: 3 | RNVC: 2

9 Jul 2013

5110-22-221-3633

5110-22-221-3491

5110-51-000-7007
Hand Cold Chisel

510007007
76220-07: RNCC: 3 | RNVC: 2
76220-07: RNCC: 5 | RNVC: 2
391211111804: RNCC: 6 | RNVC: 9
49060: RNCC: 6 | RNVC: 9

12 Jun 2009

5110-99-456-2110

5110-33-156-6009
Diagonal Cutting Pliers

331566009
740.125: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-33-005-3839
Bent Trimmers Shears

330053839
76 941: RNCC: 3 | RNVC: 2

16 Jul 2001

5110-14-227-5466
Grattoir A Disque

142275466
NO PRIMARY REF14-227-5466: RNCC: 3 | RNVC: 2
11080: RNCC: 5 | RNVC: 9

1 Jan 1966

5110-22-609-2871
Hand Operated Cable Cutter

226092871
4003330001: RNCC: 3 | RNVC: 2

10 Jan 2005

5110-12-153-2074
Freisenker Fraeser

121532074
CH278-14FE: RNCC: 3 | RNVC: 2
1201 9477: RNCC: 5 | RNVC: 2
CH278-14FE: RNCC: 5 | RNVC: 9
A26-50-129: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-148-6002
Reamer Blade Set

121486002
NO PRIMARY REF 12-148-6002: RNCC: 3 | RNVC: 2
101436: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-209-9827
Forbici Olfa Multiu

152099827
OLFA: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-528-5702
Reseating Tool

995285702
Z2788D: RNCC: 3 | RNVC: 1

25 Apr 1991

5110-66-010-7948
Reamer Blade Set

660107948
MICR0SETBLADESETL: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-66-016-4921
Hand File

660164921
911781: RNCC: 3 | RNVC: 2
R0UNDFILE: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-14-248-5497

5110-12-368-6623
Diagonal Cutting Pliers

123686623
7402160: RNCC: 3 | RNVC: 2

4 Apr 2006

5110-15-235-9358
Stelo Per Impugnatu

152359358
107011: RNCC: 3 | RNVC: 2
511015E064954: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-12-368-9833
Double Bow Cutting Punch

123689833
0100690: RNCC: 3 | RNVC: 2
00.09.54.81: RNCC: 5 | RNVC: 2

10 May 2006

5110-21-866-3169
Single Bow Cutting Punch

218663169
500SIZE1A: RNCC: 3 | RNVC: 2

19 May 1972

5110-15-199-0787
Double Bow Cutting Punch

151990787
3703-56: RNCC: 3 | RNVC: 2
C3703-56: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-161-3455
Punta Carvit-Bit Mo

151613455
PUNTA CARVIT-BIT MOD.FRESA: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-14-271-7253

5110-15-216-1700
Filiera 14X1

152161700
SKF14X1: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-192-5005
Chiave Combinata 36

151925005
420036: RNCC: 3 | RNVC: 2
(241)AJ236420036: RNCC: 5 | RNVC: 2

22 Mar 2010

5110-15-191-7738
Tronchese Con Tagli

151917738
553F: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-99-480-7502
Ultra Flush Cutter

994807502
8142: RNCC: 3 | RNVC: 2
228-4121: RNCC: 5 | RNVC: 2

1 Sep 1999

5110-66-011-4826
Hand Reamer

660114826
606A01562: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-137-8452
Levachiodi

151378452
3592: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-21-878-2253
Metal Cutting Hand Saw

218782253
HS3: RNCC: 3 | RNVC: 2
1265: RNCC: 5 | RNVC: 2
345: RNCC: 5 | RNVC: 2

9 May 1978

5110-25-105-4259
Hand Reamer Set

251054259
17B: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-221-9217
Segaccio Cm.60 Comp

152219217
ART34510: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-428-9634

5110-99-428-9631

5110-14-393-0393
Craftsman's Knife

143930393
41K: RNCC: 3 | RNVC: 2

12 Apr 1984

5110-15-183-4883
Accetta

151834883
COMM631003020001: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-66-149-9386
Craftsman's Knife

661499386
NO PRIMARY REF 66-149-9386: RNCC: 3 | RNVC: 2
03833203: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-99-135-3273
Hand File

991353273
M1LLEN1CUTHANDTANGEDF1NECUT101N: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-287-8397
Hand Metal Stamping Die

142878397
NT92-01JUIN51P0INC0N7-3MM: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-287-8397: RNCC: 3 | RNVC: 2
NT92-01JUIN51P0INC0N7-3MM: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-99-910-4940
Hand File

999104940
DEF1098: RNCC: 4 | RNVC: 1
H20301: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4941
Hand File

999104941
DEF1098: RNCC: 4 | RNVC: 1
H20964: RNCC: 5 | RNVC: 2
FA13573: RNCC: 6 | RNVC: 9
9104941: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
1A933: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-217-2889
Ricambio Per Cesoia

152172889
8010164: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-842-1810
Wire Cutters

998421810
1A 1279996: RNCC: 3 | RNVC: 2

4 Sep 1997

5110-99-836-7567
Knife Blade Set

998367567
JB98B0614: RNCC: 3 | RNVC: 2

24 Mar 2010

5110-27-010-6602
Hand File

270106602
99999-NIIN-DA0014034: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-490-9432
Cisaille

144909432
4193 102 661 000: RNCC: 3 | RNVC: 2
F300 0T 000 6950: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-98-206-0546
Scraping Knife

982060546
DFAMPD04053: RNCC: 3 | RNVC: 2

2 Jun 2004

5110-15-126-8605
Attrezzo Adattat-

151268605
RF65: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-230-3950
Raspa Mezza Tonda

152303950
2658/1-8": RNCC: 3 | RNVC: 2
511015E060154: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-214-9939
Svasatore

152149939
7795/3-16,5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-377-2532
Straight Trimmers Shears

123772532
29011430: RNCC: 3 | RNVC: 2

19 Dec 2008

5110-14-273-7500

5110-14-489-5801
Hand Metal Stamping Die

144895801
SIGLE SEA+EXP: RNCC: 3 | RNVC: 2

6 Aug 1997

5110-15-138-1215
Scalpello Piatto Mm

151381215
351112: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-14-295-6821

5110-99-275-5406
Single Bit Ax

992755406
SJ-BFG60: RNCC: 3 | RNVC: 2

5 Jul 2011

5110-12-177-5809
Locheisen

121775809
6887-11: RNCC: 3 | RNVC: 9

7 Feb 1979

5110-15-208-8229
Tronchese

152088229
3TAGFZDLCNN190: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-878-2860
Hand File

218782860
921016: RNCC: 3 | RNVC: 2
81-13650: RNCC: 5 | RNVC: 2
21016: RNCC: 5 | RNVC: 9

26 Sep 1978

5110-27-014-9035
Single Bow Cutting Punch

270149035
5120ATFD0468: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-21-849-7781
Hand File

218497781
5110-0481: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-209-7405
Tagliavetro Wolf-93

152097405
WOLF-930: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-230-5972
Scalpello Con Param

152305972
1703PM/280: RNCC: 3 | RNVC: 2
511015E155244: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-144-3478
Lima Per Metalli Me

151443478
2356GD8: RNCC: 3 | RNVC: 2
2561-3D8: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-14-244-0794

5110-15-183-3009
Fustella

151833009
160101: RNCC: 3 | RNVC: 2
160A-2MM.: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-866-8373
Scraping Knife

218668373
S5S: RNCC: 3 | RNVC: 2

16 Jun 1972

5110-15-165-3908
Barretta Per Inciso

151653908
9504280: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-19-001-8485
Single Bit Ax

190018485
75320-576B0: RNCC: 3 | RNVC: 2

11 Jul 2006

5110-99-702-0687
File Second Cut

997020687
NO PRIMARY REF 99-702-0687: RNCC: 3 | RNVC: 2
37-50058: RNCC: 5 | RNVC: 2

11 Dec 1995

5110-66-142-1208
Hand Cold Chisel

661421208
5CHC17516: RNCC: 3 | RNVC: 2
59MUM707: RNCC: 5 | RNVC: 2

5 Mar 1996

5110-15-194-2558
Pinza Becchi Piegat

151942558
010380017: RNCC: 3 | RNVC: 2
(241)A0873010380017: RNCC: 5 | RNVC: 2

20 Oct 2010

5110-15-209-0404
Pinza Spellafili

152090404
STR23: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-27-019-4355
Hand File

270194355
10091KEGE0020: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-176-4557
Lame Di Ricambio In

151764557
5232GP: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-133-2770
Tronchesi

151332770
188NT205: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-99-601-0883

5110-99-601-0860
Reamer

5110-12-394-3656
Lacquer Scraper

123943656
497525: RNCC: 3 | RNVC: 2
LZK-HM: RNCC: 5 | RNVC: 2

25 Nov 2013

5110-21-851-1977
Double Bow Cutting Punch

218511977
27: RNCC: 3 | RNVC: 1
149: RNCC: 3 | RNVC: 1
5110-0948: RNCC: 5 | RNVC: 9

2 Aug 1968

5110-99-452-9626
Hand Reamer

994529626
A04470AAR: RNCC: 3 | RNVC: 2
1MEVDTF: RNCC: 6 | RNVC: 9

1 Apr 2003

5110-22-612-8680
Grinding Wheel

226128680
201821.00: RNCC: 3 | RNVC: 2

6 Mar 2006

5110-21-639-4063
Single Bit Ax Handle

216394063
39GP10: RNCC: 4 | RNVC: 1
REVM: RNCC: 6 | RNVC: 9

9 Jun 1964

5110-99-127-5127
Straight Trimmers Shears

991275127
TDS51-F118: RNCC: 2 | RNVC: 2
1C2154: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-22-606-4146
Hand Hacksaw Frame

226064146
222: RNCC: 3 | RNVC: 2
206-2117: RNCC: 5 | RNVC: 2
7311518011505: RNCC: 5 | RNVC: 9

11 Feb 2004

5110-14-514-6713
Hand Operated Cable Cutter

145146713
CC32A: RNCC: 3 | RNVC: 2

8 Jun 1999

5110-25-152-2988
Hand Wire Stripper

251522988
ABIKO 001: RNCC: 3 | RNVC: 2
8566-0108: RNCC: 5 | RNVC: 2

11 Oct 2006

5110-12-126-1511
Hand Reamer

121261511
NO PRIMARY REF 12-126-1511: RNCC: 3 | RNVC: 2
16-5DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-854-7660
Hand Powered Poppet Valve Lapper

988547660
NO PRIMARY REF 98-854-7660: RNCC: 3 | RNVC: 2
317 TT-30: RNCC: 5 | RNVC: 2

5 May 1981

5110-12-137-9290
Double Bow Cutting Punch

121379290
DIN7200-A21: RNCC: 2 | RNVC: 2
0100210: RNCC: 3 | RNVC: 2
606219: RNCC: 3 | RNVC: 2
240-21: RNCC: 5 | RNVC: 2
00.09.06.33: RNCC: 5 | RNVC: 2
A21DIN7200: RNCC: 5 | RNVC: 2
DIN7200A21: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-138-3425
Nut Splitter Cutter

991383425
031612: RNCC: 3 | RNVC: 2
316: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-118-9984

5110-22-221-4442

5110-99-120-0894
Ha Wire Rope Cutter

991200894
H518: RNCC: 2 | RNVC: 2
H518: RNCC: 6 | RNVC: 9
1A3745: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-126-2654
Kommutator Saege

121262654
736: RNCC: 3 | RNVC: 2
49090-100: RNCC: 3 | RNVC: 2
120540: RNCC: 3 | RNVC: 2
2205-00: RNCC: 5 | RNVC: 9
6862460HNESAEGEBLAETTER: RNCC: 5 | RNVC: 9
2205HALTER: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-639-4880
Hand File

216394880
39GP53: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-15-208-8196
Tronchese

152088196
3TAGFZDLDRL130: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-230-5533
Tenaglia Cementisti

152305533
511015E080116: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-66-022-7245
Hand Reamer

660227245
DDE20362: RNCC: 2 | RNVC: 2

1 Jan 1968

5110-15-176-3826
Miniseghetto Con Im

151763826
1725SN: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-12-325-6290
Plane Cutter Bit

123256290
1609200978: RNCC: 3 | RNVC: 2

24 Jun 1991

5110-15-125-1345
Troncabilloni Da 10

151251345
196-1000: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-216-9573
Lime Assortite

152169573
0622: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4848
Alesatore

152084848
3AAXFCFRDP23-9: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-305-6433
Knockout Punch And Die

123056433
74331215: RNCC: 3 | RNVC: 9

28 Nov 1985

5110-12-173-9338
Zentriervorrichtung

121739338
4612A: RNCC: 3 | RNVC: 2

23 May 1978

5110-14-201-5375

5110-21-639-5960
Hand Metal Stamping Die Set

216395960
101: RNCC: 3 | RNVC: 1
GGGD280: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-15-212-8072
Ganasce Per Orologi

152128072
16689: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-368-9808
Double Bow Cutting Punch

123689808
0100610: RNCC: 3 | RNVC: 2
00.09.46.73: RNCC: 5 | RNVC: 2

10 May 2006

5110-21-814-1251
Die Dimpling Body

218141251
ZT177101-3/16: RNCC: 3 | RNVC: 2
ZT177101-3-16: RNCC: 5 | RNVC: 2

13 Jun 1964

5110-98-205-4746
Crosscut Hand Saw

982054746
DFAMPD00191/10: RNCC: 2 | RNVC: 2

12 Oct 2000

5110-15-213-3295
Lima Rettangolare A

152133295
1-143-08-1-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-716-2475
Trimming Tool

997162475
XT978: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-12-126-1997

5110-15-169-4949
Tronchesine

151694949
F72013250: RNCC: 3 | RNVC: 2

5 Nov 2002

5110-26-301-1983
Diagonal Cutting Pliers

263011983
PV098: RNCC: 3 | RNVC: 2

26 Jun 2013

5110-12-355-8007
Hand Metal Cutting Shears

123558007
148-320: RNCC: 3 | RNVC: 9

14 Dec 2001

5110-21-637-5201
Hand Reamer

216375201
B94-2: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1
140: RNCC: 5 | RNVC: 1

6 Jun 1968

5110-12-382-5279
Ax Holder

123825279
9999075-971190.000.0: RNCC: 3 | RNVC: 2

1 Jul 2010

5110-13-103-3249
Hand Reamer

131033249
7280-24-5: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-12-176-8357
Hand Reamer

121768357
DIN206-B19-HSS: RNCC: 2 | RNVC: 2
301-FORM B-19: RNCC: 3 | RNVC: 2
F1131-19: RNCC: 3 | RNVC: 2
13010-19: RNCC: 5 | RNVC: 9
7586C19: RNCC: 5 | RNVC: 9
536C19: RNCC: 5 | RNVC: 9
B19DIN206HSS: RNCC: 5 | RNVC: 9

20 Dec 1978

5110-21-865-0029

5110-15-123-7965
Forbici Mod.Abc

151237965
2166-285: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-266-7014

5110-27-008-5760
Hand File

270085760
30.0102012: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-12-140-0254

5110-66-150-5140
Bow Saw Blade

661505140
NO PRIMARY REF 66-150-5140: RNCC: 3 | RNVC: 2
07249408: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-700-3854
Hand Cold Chisel

127003854
51-084001004: RNCC: 2 | RNVC: 2

22 Apr 1992

5110-14-264-4817

5110-14-244-0704

5110-22-269-1007
Starter Val Grinder

222691007
62071-15H-3101: RNCC: 3 | RNVC: 2
62071-15H-3101: RNCC: 5 | RNVC: 2

7 Jun 1996

5110-66-024-1502
Hand Reamer

660241502
ADJUSTABLE REAMER: RNCC: 3 | RNVC: 1
653 0086: RNCC: 3 | RNVC: 2
MB: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-21-899-4795
Dimpling Punch

218994795
ZT2065-#10: RNCC: 3 | RNVC: 2
ZT2065-10: RNCC: 5 | RNVC: 2

12 Aug 1985

5110-15-221-9294
Scalpello Per Legno

152219294
1031-10: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-137-3603
Hand Operated Wire Rope Cutter

251373603
20-07: RNCC: 5 | RNVC: 2

12 May 1989

5110-12-126-1889
Cutting Punch Insert

121261889
TL5110-0033-B3: RNCC: 2 | RNVC: 2
8560: RNCC: 3 | RNVC: 2
1560: RNCC: 5 | RNVC: 9

30 May 1969

5110-13-113-7434
Tip Cutting Pliers

131137434
582E: RNCC: 3 | RNVC: 2

13 Mar 1990

5110-15-208-8252
Alesatore Cilindric

152088252
3AAWFCFRDP16: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-98-207-4408
File Handle

982074408
DEMPD10057: RNCC: 2 | RNVC: 2

31 Jan 2011

5110-21-808-8247
Hand Reamer

218088247
717: RNCC: 3 | RNVC: 1

9 Nov 1968

5110-15-216-9578
Falsa Squadra

152169578
0628: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-209-0866
Tronche Di Alta Pre

152090866
312 SR: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-300-9042

5110-15-208-4855
Cesoia

152084855
4KCACNDX320: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4547
Alesatore

152084547
3AARPERMDQ11: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-388-5046
Diagonal Cutting Pliers

123885046
70 02 140: RNCC: 3 | RNVC: 2
4003773023098: RNCC: 5 | RNVC: 2

27 Mar 2012

5110-21-805-5973

5110-21-805-5988

5110-27-010-6553
Hand File

270106553
99999-NIIN-DA0039336: RNCC: 2 | RNVC: 1

21 Jun 2002

5110-17-113-1432
Hand Reamer

171131432
Y6905 045055: RNCC: 3 | RNVC: 2

29 Feb 2000

5110-99-433-5028
Hand Operated Cable Cutter

994335028
308049: RNCC: 3 | RNVC: 2

8 Nov 2010

5110-21-859-0387
Hand File

218590387
39GP53: RNCC: 4 | RNVC: 1

14 May 1970

5110-12-192-8901
Brick Chisel

121928901
20.109.500: RNCC: 3 | RNVC: 2
1-554501: RNCC: 3 | RNVC: 2
20.109.500: RNCC: 3 | RNVC: 9
LU.32-500X35MM: RNCC: 5 | RNVC: 2
LU.32-500X35MM: RNCC: 5 | RNVC: 9

1 Jun 1982

5110-27-021-2743
Plumber's Saw Blade

270212743
10131ML1002: RNCC: 2 | RNVC: 1
AA 46 V: RNCC: 5 | RNVC: 9
300*13*0,8-18 08EVR0001: RNCC: 5 | RNVC: 9

15 Dec 2003

5110-12-141-1196
Hand Reamer

121411196
DIN859-B7-HSS: RNCC: 2 | RNVC: 2
302-B7: RNCC: 3 | RNVC: 2
302-FORM B-7,0: RNCC: 5 | RNVC: 2
7DIN859SCHNELLARBEITSSTAHLSPIRA-: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-910-6836
Wire Stripper Blade

999106836
45-1774-1: RNCC: 3 | RNVC: 2
45-1774-1: RNCC: 5 | RNVC: 2
VG95236T16BA0: RNCC: 5 | RNVC: 2
45-1774-1: RNCC: 5 | RNVC: 2
1M1098: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-98-102-0397
Tailor's Shears

981020397
BLUNT POINTS 9IN: RNCC: 3 | RNVC: 2

14 Dec 1978

5110-15-230-5453
Lama Ricambio Cesoi

152305453
0342010: RNCC: 3 | RNVC: 2

19 Jul 2007

5110-15-002-4728
Reamer

150024728
34004 01 2489: RNCC: 3 | RNVC: 2

29 Aug 2013

5110-25-143-4191
Hand Wire Stripper

251434191
TG-1013: RNCC: 3 | RNVC: 2

29 Nov 1993

5110-21-849-9078
Hand Ice Saw Handle

218499078
352: RNCC: 3 | RNVC: 2
5110-0796: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-12-135-4129
Firmer Chisel

121354129
NO PRIMARY REF 12-135-4129: RNCC: 3 | RNVC: 2
B24HLDIN5141: RNCC: 5 | RNVC: 9
B24HLDIN5141MG: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-122-8438
Hand Reamer

991228438
BS122PT2: RNCC: 4 | RNVC: 1
1G549: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-192-9865
Pinze Tagliatubi Pe

151929865
3410001: RNCC: 3 | RNVC: 2
(241)AD7823410001: RNCC: 5 | RNVC: 2

31 Mar 2010

5110-99-609-5705
Hollow Cutter

996095705
HU14706: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-25-143-1589

5110-99-938-8103
Wire Blade Assembly

999388103
FV2281896: RNCC: 3 | RNVC: 2

1 Oct 2009

5110-99-560-8550
Hand File

995608550
600100440: RNCC: 3 | RNVC: 2

13 Oct 1998

5110-14-469-1878
Outil De Rectificat

144691878
DLP705300: RNCC: 3 | RNVC: 2
RAB3211: RNCC: 5 | RNVC: 2

13 Apr 1994

5110-21-849-9901
Engraving Tool

218499901
Z3886: RNCC: 3 | RNVC: 2

2 Aug 1968

5110-98-857-2025
Hand File

988572025
NO PRIMARY REF 98-857-2025: RNCC: 3 | RNVC: 2
BASTARD: RNCC: 5 | RNVC: 2

23 Aug 1983

5110-14-400-4656

5110-14-407-8829

5110-25-130-3825
Diagonal Cut Pliers

5110-21-847-4937
Hand Wire Stripper

218474937
760: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-66-021-7224
Hand Metal Stamping Die

660217224
47: RNCC: 4 | RNVC: 1
DEF(AUST)5047: RNCC: 4 | RNVC: 1

1 Jan 1968

5110-66-063-9667
Craftsman's Knife

660639667
10-109A: RNCC: 3 | RNVC: 2

18 Sep 1975

5110-17-124-0425
Hand Reamer

171240425
513.32.09.116: RNCC: 3 | RNVC: 2

4 Nov 2011

5110-12-311-5618
Pinking Shears

123115618
03399029 240MM: RNCC: 3 | RNVC: 9

17 Sep 1987

5110-21-849-8068
Hand File

218498068
WEBSAW: RNCC: 3 | RNVC: 1
917010: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1
5110-0622: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-16-005-9218
Single Bit Ax

160059218
3003: RNCC: 3 | RNVC: 2
3003/600G-CT: RNCC: 5 | RNVC: 2
413217004000: RNCC: 5 | RNVC: 2
413217004000: RNCC: 5 | RNVC: 9

21 Feb 2008

5110-14-283-5077
Pliers

142835077
401: RNCC: 3 | RNVC: 2
401: RNCC: 5 | RNVC: 2
3148511750001: RNCC: 5 | RNVC: 2
0178019L00: RNCC: 5 | RNVC: 2
91463566: RNCC: 5 | RNVC: 2
0175000: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-27-042-3953
Hand Reamer

270423953
RAYBA MONOFAZE: RNCC: 2 | RNVC: 1

13 Aug 2008

5110-98-107-1731

5110-66-093-8569
Bolt Cutter Jaws

5110-15-132-6895
Coltello Per Rifila

151326895
T3700: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-12-360-5714
Hand Cable Stripper

123605714
53631040: RNCC: 3 | RNVC: 2
0005385030: RNCC: 5 | RNVC: 2

10 Jun 2003

5110-15-165-3887
Cesoie Per Cavi

151653887
71500: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-25-113-8896

5110-14-505-1912
Hand Operated Cable Cutter

145051912
NO PRIMARY REF14-505-1912: RNCC: 3 | RNVC: 2
3148511754900: RNCC: 5 | RNVC: 2
414: RNCC: 5 | RNVC: 2

11 Mar 1998

5110-12-021-2507

5110-66-120-4957
Hand Reamer

661204957
ADJUSTABLE REAMER: RNCC: 3 | RNVC: 1
653 0111: RNCC: 3 | RNVC: 2
ME: RNCC: 5 | RNVC: 9

9 Jun 1984

5110-99-812-3682
Bore Cutter

998123682
EMT193-2: RNCC: 3 | RNVC: 2
LV3RREMT193-2: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-536-5298
Hand Metal Stamping Die Set

145365298
293A.2: RNCC: 3 | RNVC: 2
3148511663158: RNCC: 5 | RNVC: 2

28 Aug 2003

5110-99-465-6038
Web Equ Repair Tool

994656038
1C1864: RNCC: 3 | RNVC: 2
CUTTER NO2: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-204-9611

5110-12-306-6652
Diagonal Cutting Pliers

123066652
1350659: RNCC: 3 | RNVC: 2
135065: RNCC: 5 | RNVC: 9
2646GS: RNCC: 5 | RNVC: 9

19 Mar 1986

5110-27-000-8111
Hand Metal Cutting Shears

270008111
6820 05 0300: RNCC: 2 | RNVC: 1
5120270008111: RNCC: 2 | RNVC: 1
6820 05 0300: RNCC: 3 | RNVC: 2
10131KM0156: RNCC: 3 | RNVC: 2
6820 05 0300: RNCC: 5 | RNVC: 1

11 Jun 1991

5110-15-207-5823
Mattock Head Ax

152075823
GG121420: RNCC: 3 | RNVC: 2
(241)AD247GG121420: RNCC: 5 | RNVC: 2

31 Oct 2012

5110-27-010-6710
Hand File

270106710
99999-NIIN-DA0037114: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-25-100-6601
Knockout Punch And Die Set

251006601
2IN: RNCC: 5 | RNVC: 1

1 Jan 1984

5110-22-303-6454

5110-22-303-6459

5110-99-924-2807
Ship Scraper

999242807
13521: RNCC: 3 | RNVC: 2
0276-13521: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-333-1930
Kreisschnei Messer

123331930
140A: RNCC: 3 | RNVC: 2

9 Nov 1993

5110-21-637-5593
Hand Reamer

216375593
CRITCHLEYANGLEBLADE: RNCC: 3 | RNVC: 1
1F108040: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-21-807-1164
Cylinder Ridge Reamer

218071164
SR2: RNCC: 3 | RNVC: 2

5 Feb 1964

5110-21-808-8248
Hand Reamer

218088248
B94-2: RNCC: 3 | RNVC: 1
B174-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1
717-1 1-2: RNCC: 5 | RNVC: 2

9 Jun 1964

5110-99-754-4189
Hand Metal Cutting Shears

997544189
10504311N: RNCC: 3 | RNVC: 2
METS/7/7/020: RNCC: 5 | RNVC: 1

7 Jan 2013

5110-15-183-3004
Fustella

151833004
160105: RNCC: 3 | RNVC: 2
160A-4MM.: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-004-9142
Lama

150049142
63502112021: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-12-311-2349
Knockout Punch And Die

123112349
18.524.15: RNCC: 3 | RNVC: 2

7 Aug 1987

5110-99-388-6601
Hand File

993886601
958003670: RNCC: 3 | RNVC: 2

20 Oct 2010

5110-16-006-1647
Hand File

160061647
286211213035: RNCC: 3 | RNVC: 2
8595055900259: RNCC: 5 | RNVC: 2
PSO 300/3: RNCC: 5 | RNVC: 2

9 Dec 2008

5110-15-190-3671
Sgorbia Da Falegnam

151903671
4QMZM30: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-25-133-0196

5110-99-309-2523
Kevlar Scissors

993092523
C124: RNCC: 3 | RNVC: 2
C124: RNCC: 5 | RNVC: 2
CEMIC 124: RNCC: 5 | RNVC: 2
XP97PL01094: RNCC: 6 | RNVC: 9

15 Dec 1997

5110-14-244-0723

5110-25-134-4451

5110-27-000-8091
Hand Metal Cutting Shears

270008091
6211 05 0300: RNCC: 2 | RNVC: 1
10131KM0155: RNCC: 3 | RNVC: 2
6211 05 0300: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-15-204-8300
Cutter 18Mm

152048300
1771BM: RNCC: 3 | RNVC: 2
(241)AK0621771BM: RNCC: 5 | RNVC: 2

13 Jan 2012

5110-21-843-6361

5110-99-423-8487
Cutter

994238487
NO PRIMARY REF 99-423-8487: RNCC: 3 | RNVC: 2
563596: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-27-010-6584
Hand File

270106584
99999-NIIN-DA0014073: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-141-1934
Serie Scalpelli

151411934
ST510: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-171-8611
Bearing Scraper

121718611
455010: RNCC: 3 | RNVC: 2

22 Nov 1977

5110-66-150-5328
Plane Cutter Bit

661505328
NO PRIMARY REF 66-150-5328: RNCC: 3 | RNVC: 2
05538409: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-14-572-2254
Pliers

145722254
NO PRIMARY REF 14-572-2254: RNCC: 3 | RNVC: 2
830072: RNCC: 5 | RNVC: 2

15 Jun 2012

5110-21-639-4923
Woodworking Butt Chisel

216394923
200: RNCC: 3 | RNVC: 1
750C: RNCC: 3 | RNVC: 1
3590A13: RNCC: 3 | RNVC: 2
1F21150: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-210-6092
Tronchese Mm.130

152106092
EH101MA: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-3736
Tagliadadi

151653736
1411G3: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-901-6123
Seat Belt Cutter

219016123
861W634: RNCC: 3 | RNVC: 2

14 Mar 1986

5110-66-150-3513
Razor Blade Glass Scraper

661503513
28.593: RNCC: 3 | RNVC: 2
03812305: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-66-026-1155
Plane Blade

660261155
12-603: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-98-102-1804
Smooth Plane

981021804
NO PRIMARY REF 98-102-1804: RNCC: 3 | RNVC: 2
04: RNCC: 5 | RNVC: 2
4SMOOTH: RNCC: 5 | RNVC: 2

1 Jun 1990

5110-25-100-4141
Hand Masonry Drill

251004141
NO PRIMARY REF25-100-4141: RNCC: 3 | RNVC: 2
41-3054-100-500: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-99-984-8300
Scraper

999848300
ACC80892: RNCC: 3 | RNVC: 2

7 Mar 2011

5110-15-237-8733
Tagliatubo Per Rame

152378733
2-A: RNCC: 3 | RNVC: 2
511015E038759: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-189-4189
Diagonal Cutting Pliers

151894189
07150173: RNCC: 3 | RNVC: 2
7150173: RNCC: 3 | RNVC: 2
(241)A936307150173: RNCC: 5 | RNVC: 2

19 Feb 2010

5110-21-865-8950
Ice Auger

218658950
78-8011: RNCC: 3 | RNVC: 2

19 May 1972

5110-15-165-4203
Tenaglia

151654203
5101: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-120-0883
Bolt Cutter Blade

991200883
H530: RNCC: 2 | RNVC: 2

25 Apr 1991

5110-41-001-3404
Razor Blade Glass Scraper

410013404
0891642: RNCC: 3 | RNVC: 2

4 Mar 2010

5110-98-105-8690
Hand Reamer

981058690
NO PRIMARY REF 98-105-8690: RNCC: 3 | RNVC: 2
METRIC 2050-10.0: RNCC: 5 | RNVC: 2

18 May 1978

5110-19-001-0495
Hatchet Handle

190010495
DCN4-9100: RNCC: 3 | RNVC: 2

17 Jun 2004

5110-12-385-2913
Oval Cutting Punch

123852913
50.000.115: RNCC: 3 | RNVC: 2

18 May 2011

5110-21-903-3262
Sno Handle Assembly

219033262
0026-6232: RNCC: 3 | RNVC: 2

31 Mar 1988

5110-12-170-9630
Single Bit Ax

121709630
DIN7294-B B1,25SB: RNCC: 2 | RNVC: 9
5827-1250: RNCC: 3 | RNVC: 9
7244-1250: RNCC: 3 | RNVC: 9
B1-25SBDIN7294B: RNCC: 5 | RNVC: 9
DIN7294-B-B1,25-SB: RNCC: 5 | RNVC: 9

24 Aug 1977

5110-15-172-7106
Spazzola Fs Marine

151727106
SPAZZOLA FS MARINE NYLON MM.300: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-136-3858
Cesoie

151363858
206D280: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-165-4314
Tagliabulloni 450

151654314
196020: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-716-9876

5110-66-146-7951
Hand Masonry Drill Set

661467951
080055: RNCC: 3 | RNVC: 2
04668817: RNCC: 5 | RNVC: 2

9 Aug 2000

5110-12-368-1860
Entgrater Klinge

123681860
BR1001: RNCC: 3 | RNVC: 2

4 Jan 2006

5110-15-213-6664
Kit Montaggio Inser

152136664
SRM0610D: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-150-4002
Coping Saw Blade

661504002
NO PRIMARY REF 66-150-4002: RNCC: 3 | RNVC: 2
00568004: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-23-113-9194
File Flat With Hand

231139194
RK48625: RNCC: 3 | RNVC: 2

12 Jun 2004

5110-21-105-2158
Knockout Punch And Die Set

211052158
735: RNCC: 3 | RNVC: 2
GGGP836: RNCC: 4 | RNVC: 1
6R7514-1: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-66-154-6416
Rescue Tool

661546416
RAR L H SBC: RNCC: 3 | RNVC: 2

1 Aug 2006

5110-22-609-9544
Circle Cutter

226099544
CMP-1: RNCC: 3 | RNVC: 2

16 Mar 2005

5110-99-910-9974
Hand Reamer

999109974
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16237: RNCC: 6 | RNVC: 9
10133: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-237-7637

5110-15-184-7331
Ferro Per Sponderuo

151847331
3IANSRSQ18: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-120-7295
Hand Wire St Blades

991207295
H5993: RNCC: 2 | RNVC: 2

25 Apr 1991

5110-37-525-6164
Scraping Knife

375256164
403010200: RNCC: 3 | RNVC: 2

19 Feb 2013

5110-15-165-4296
Siringa Polietilene

151654296
514717: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-211-9981
Alesatori In Serie

152119981
3AASGECNLU48S: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-200-1823

5110-22-221-4234

5110-21-111-2910

5110-12-148-6003
Reamer Blade Set

121486003
NO PRIMARY REF 12-148-6003: RNCC: 3 | RNVC: 2
101437: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-639-6265
Rabbet Plane

216396265
12-078: RNCC: 3 | RNVC: 2
78: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-99-138-1335
Firmer Gouge

991381335
DEF STAN 51-11:PART 27: RNCC: 4 | RNVC: 1
BS1943: RNCC: 4 | RNVC: 1
58R40028: RNCC: 6 | RNVC: 9
TABLE 3A: RNCC: 6 | RNVC: 9
BS1943-TABLE 3A: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-132-1893
Hand Reamer

121321893
DIN206-B11-HSS: RNCC: 2 | RNVC: 2
346A11SSH7: RNCC: 5 | RNVC: 2
11DIN206SSSPIRALGENUTET: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-639-5806
Hand Metal Stamping Die Set

216395806
1350: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-237-6902
Paraspigolo Pino Lu

152376902
16811200: RNCC: 3 | RNVC: 2
511015E077666: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-12-308-5935
Hand Reamer Set

123085935
130.00.100: RNCC: 3 | RNVC: 2
USI: RNCC: 5 | RNVC: 2

28 Oct 1986

5110-13-121-5944
Hand Optical Fiber Stripper

131215944
JR-M03: RNCC: 3 | RNVC: 2

27 May 2013

5110-14-238-2980

5110-12-137-8843
Straight Trimmers Shears

121378843
43774: RNCC: 3 | RNVC: 2

30 May 1969

5110-27-046-3758
Muk Kesme Makinasi

270463758
9151002: RNCC: 5 | RNVC: 9

3 Aug 2009

5110-12-385-2404
Knife Blade Handle

123852404
231589: RNCC: 3 | RNVC: 2

12 May 2011

5110-25-103-4711
File Handle

251034711
1SBF5110HVK8: RNCC: 2 | RNVC: 1
FS 5110-0418 POS 1: RNCC: 2 | RNVC: 2
95F: RNCC: 3 | RNVC: 2
100F: RNCC: 3 | RNVC: 2
90F: RNCC: 3 | RNVC: 2
3585-010-6: RNCC: 5 | RNVC: 2
60515310: RNCC: 5 | RNVC: 2
211034-2: RNCC: 6 | RNVC: 9
211033-4: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-21-849-8487

5110-21-105-1235

5110-15-138-1401
Serie Di Lime

151381401
991021: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-14-291-8131

5110-21-868-1353
Hand Metal Stamping Die Set

218681353
1550: RNCC: 3 | RNVC: 1

20 Oct 1972

5110-21-639-6094
Hand Hacksaw Blade

216396094
46GP1: RNCC: 4 | RNVC: 1

25 May 1968

5110-17-709-1607
Hand File

177091607
DIN8342C85X2METR0NDESMALLEZYDEN: RNCC: 2 | RNVC: 1
DIN8342C85X2MITRUNDESCHMALSEITEN: RNCC: 2 | RNVC: 2
2112R2L80: RNCC: 5 | RNVC: 9

17 Aug 1974

5110-15-211-7950
Utensile Per Tornio

152117950
12X20: RNCC: 5 | RNVC: 3
12X20: RNCC: 5 | RNVC: 9

16 Nov 2005

5110-99-120-2190
Hand Reamer

991202190
BS3088: RNCC: 4 | RNVC: 1
H13: RNCC: 6 | RNVC: 9
DEFSTA51-9: RNCC: 6 | RNVC: 9
F1FA16171: RNCC: 6 | RNVC: 9
1G273: RNCC: 6 | RNVC: 9

25 Apr 1991

Load More Results