What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 8 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 8of 112

5110-01-435-6862
Hand Diamond Point Chisel

014356862
CD832: RNCC: 3 | RNVC: 2
CD832 WILDE: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-6845
Thread Restorer File

014356845
TR1: RNCC: 3 | RNVC: 2

29 Aug 1996

5110-01-435-6839
Diagonal Cutting Pliers

014356839
933-7SC: RNCC: 3 | RNVC: 2

29 Aug 1996

5110-01-435-6840
Hand Hacksaw Blade

014356840
62645: RNCC: 3 | RNVC: 9
62645 COOPER/NICHOLSON: RNCC: 5 | RNVC: 2
62645: RNCC: C | RNVC: 1

29 Aug 1996

5110-01-435-6831
Scraping Knife

014356831
01440: RNCC: 3 | RNVC: 2
01440 HYDE: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-6826
Thread Restorer File

014356826
177-2: RNCC: 3 | RNVC: 2
177-2 GENERAL TOOL: RNCC: 5 | RNVC: 2
31240: RNCC: 5 | RNVC: 2
177-2: RNCC: 5 | RNVC: 9

29 Aug 1996

5110-01-435-6821
Hand Hacksaw Blade

014356821
62640: RNCC: 3 | RNVC: 9
62640: RNCC: 5 | RNVC: 2
62640 COOPER/NICHOLSON: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-6814
Thread Restorer File

014356814
TR2: RNCC: 3 | RNVC: 2

29 Aug 1996

5110-01-435-6790
Hand Metal Cutting Shears

014356790
P107-D: RNCC: 3 | RNVC: 2
00727226110749: RNCC: 5 | RNVC: 2
P107-D FIRST CHOICE TOOL: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-6761
Craftsman's Knife

014356761
54020: RNCC: 3 | RNVC: 2
54020 HYDE: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-6759
Hand Hacksaw Blade

014356759
62646: RNCC: 3 | RNVC: 2

29 Aug 1996

5110-01-435-6752
Metal Cutting Hand Saw

29 Aug 1996

5110-01-435-6746
Hand Hacksaw Blade

014356746
62641: RNCC: 3 | RNVC: 9
62641 COOPER/NICHOLSON: RNCC: 5 | RNVC: 2
62641: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-6699
Thread Restorer File

014356699
177-8: RNCC: 3 | RNVC: 2
177-8 GENERAL TOOL: RNCC: 5 | RNVC: 2
31242: RNCC: 5 | RNVC: 2
177-8: RNCC: 5 | RNVC: 9

29 Aug 1996

5110-01-435-6694
Hand Cape Chisel

014356694
CP832: RNCC: 3 | RNVC: 2
CP832 WILDE: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-6690
Hand Wire Stripper-Crimper

014356690
540: RNCC: 3 | RNVC: 2
540 WILDE: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-6682
Hand Cold Chisel

014356682
B107.47: RNCC: 3 | RNVC: 1
CC832: RNCC: 3 | RNVC: 2
CC832 WILDE: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-6679
Hand Diamond Point Chisel

014356679
CD632: RNCC: 3 | RNVC: 2
CD632 WILDE: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-3912
Spring Action Scissors

014353912
9926 7097: RNCC: 3 | RNVC: 2

22 Aug 1996

5110-01-435-3906
Knife And Ax Set

014353906
WR1810: RNCC: 3 | RNVC: 2

22 Aug 1996

5110-01-435-3909
Knife And Ax Set

014353909
WR1610: RNCC: 3 | RNVC: 2

22 Aug 1996

5110-01-435-3506
Pocket Knife

014353506
C3: RNCC: 3 | RNVC: 2

21 Aug 1996

5110-01-435-0152
Hand Operated Cable Cutter

014350152
000810063-000: RNCC: 3 | RNVC: 2
180000012ITEM2: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-435-0148
Hand Operated Cable Cutter

014350148
000810062-000: RNCC: 3 | RNVC: 2
180000012ITEM1: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9999
Hand File

014349999
08832: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-435-0009
Hand File

014350009
12084: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9989
Hand File

014349989
00136: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9990
Coping Saw

014349990
80170A: RNCC: 3 | RNVC: 9
80170A: RNCC: 5 | RNVC: 2
80170: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9995
Hand File

014349995
02465: RNCC: 3 | RNVC: 9
02465: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9988
Hand File

014349988
11781: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9996
Hand File

014349996
12166: RNCC: 3 | RNVC: 9
12166: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-435-0001
Hand File

014350001
08894: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9991
Hand File

014349991
00161: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9985
Hand File

014349985
A-A-2318: RNCC: 4 | RNVC: 1
12134: RNCC: 5 | RNVC: 2
12134: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9986
Hand File

014349986
10260: RNCC: 3 | RNVC: 9
10260: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9983
Hand File

014349983
10165: RNCC: 3 | RNVC: 9
10165: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9982
Hand File

014349982
08799: RNCC: 3 | RNVC: 9
08799: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9987
Hand File

014349987
00024: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9977
Hand File

014349977
02435: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9979
Hand File

014349979
08768: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9980
Hand File

014349980
11748: RNCC: 3 | RNVC: 1
11748: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9965
Hand File

014349965
00047: RNCC: 3 | RNVC: 9
00047: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9973
Hand File

014349973
03367: RNCC: 3 | RNVC: 9
03367: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9974
Hand File

014349974
01232: RNCC: 3 | RNVC: 9
01232: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9976
Hand File

014349976
02401: RNCC: 3 | RNVC: 9
02401: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9968
Hand File

014349968
00001: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9969
Hand File

014349969
00070: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9971
Hand File

014349971
00113: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9970
Hand File

12 Aug 1996

5110-01-434-9909
File Handle

014349909
21485: RNCC: 3 | RNVC: 2
21485: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9915
Hand Wire Stripper

014349915
105CG: RNCC: 3 | RNVC: 9
105CG: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9900
Hand File

014349900
04729: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9903
Hand File

014349903
13376: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9898
Hand File

014349898
13114: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9897
Hand File

014349897
02969: RNCC: 3 | RNVC: 9
02969: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9899
Hand File

014349899
13000: RNCC: 3 | RNVC: 9
13000: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9904
Hand File

014349904
13196: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9902
Hand File

014349902
12790: RNCC: 3 | RNVC: 9
12790: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9892
Hand File

014349892
12857: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9895
Hand File

014349895
12282: RNCC: 3 | RNVC: 9
12282: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9894
Hand File

014349894
01260: RNCC: 3 | RNVC: 9
01260: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9891
Hand File

014349891
5110-01-434-9891: RNCC: 3 | RNVC: 2
12051: RNCC: 5 | RNVC: 1
12051: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9893
Hand File

014349893
12199: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9889
Hand File

014349889
02926: RNCC: 3 | RNVC: 9
02926: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9886
Hand File

014349886
A-A-2312: RNCC: 4 | RNVC: 1
05026: RNCC: 5 | RNVC: 1
05026: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9878
Diagonal Cutting Pliers

014349878
S55: RNCC: 3 | RNVC: 9
S55: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9888
Hand File

014349888
02884: RNCC: 3 | RNVC: 9
02884: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9882
Hand Cold Chisel

014349882
70-311: RNCC: 3 | RNVC: 2
70-311: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9877
Hand Cold Chisel

014349877
70-317: RNCC: 3 | RNVC: 2
70-317: RNCC: 3 | RNVC: 9
70-317: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9876
Hand Cold Chisel

014349876
70-301: RNCC: 3 | RNVC: 2
70-301: RNCC: 3 | RNVC: 9
70-301: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9875
Diagonal Cutting Pliers

014349875
S54: RNCC: 3 | RNVC: 9
S54: RNCC: C | RNVC: 1

12 Aug 1996

5110-01-434-9871
Hand Cold Chisel

014349871
70-309: RNCC: 3 | RNVC: 9
CC1632B: RNCC: 5 | RNVC: 2
70-309: RNCC: 5 | RNVC: 9
70-309: RNCC: C | RNVC: 1

12 Aug 1996

5110-01-434-9851
Metal Cutting Hand Saw

014349851
70-867: RNCC: 3 | RNVC: 2
70-867: RNCC: 3 | RNVC: 9
70-867: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9820
Hand File

014349820
A-A-2311: RNCC: 4 | RNVC: 1
03830: RNCC: 5 | RNVC: 1
03830: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9817
Hand File

014349817
A-A-2311: RNCC: 4 | RNVC: 1
03731: RNCC: 5 | RNVC: 1
03731: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9806
Hand File

014349806
03434: RNCC: 3 | RNVC: 9
03434: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9805
Hand File

014349805
03632: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9809
Hand File

014349809
03467: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9803
Hand File

014349803
03500: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9807
Hand File

014349807
A-A-2311: RNCC: 4 | RNVC: 1
03698: RNCC: 5 | RNVC: 1
03698: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9804
Hand File

014349804
03665: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9797
Hand File

014349797
03401: RNCC: 3 | RNVC: 9
03401: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9801
Hand File

014349801
03533: RNCC: 3 | RNVC: 9
03533: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9802
Hand Wire Stripper-Crimper-Cutter

014349802
67-908: RNCC: 3 | RNVC: 2
67-908: RNCC: 3 | RNVC: 9
67-908: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9799
Hand Wire Stripper-Crimper-Cutter

014349799
67-905: RNCC: 3 | RNVC: 2
67-905: RNCC: 3 | RNVC: 9
67-905: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9794
Hand Wire Stripper

014349794
67-891: RNCC: 3 | RNVC: 2
67-891: RNCC: 3 | RNVC: 9
67-891: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9784
Hand Wire Stripper-Crimper-Cutter

014349784
67-901: RNCC: 3 | RNVC: 2
67-901: RNCC: 3 | RNVC: 9
67-901: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9787
Hand Wire Stripper

014349787
67-895: RNCC: 3 | RNVC: 2
67-895: RNCC: 3 | RNVC: 9
67-895: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9766
End Cutting Nippers

014349766
67-535: RNCC: 3 | RNVC: 2
67-535: RNCC: 3 | RNVC: 9
67-535: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9754
Hand Cold Chisel

014349754
1284: RNCC: 3 | RNVC: 9
1284: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9724
Hand Metal Cutting Shears

12 Aug 1996

5110-01-434-9730
Hand Metal Cutting Shears

12 Aug 1996

5110-01-434-9722
Hand Metal Cutting Shears

12 Aug 1996

5110-01-434-9728
Hand Metal Cutting Shears

12 Aug 1996

5110-01-434-9725
Hand Metal Cutting Shears

12 Aug 1996

5110-01-434-9697
Hand Cold Chisel

014349697
70-319: RNCC: 3 | RNVC: 2
70-319: RNCC: 3 | RNVC: 9
70-319: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9723
Hand Metal Cutting Shears

12 Aug 1996

5110-01-434-9654
Hand Diamond Point Chisel

014349654
70-425: RNCC: 3 | RNVC: 2
70-425: RNCC: 3 | RNVC: 9
70-425: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9660
Hand Diamond Point Chisel

014349660
70-431: RNCC: 3 | RNVC: 2
70-431: RNCC: 3 | RNVC: 9
70-431: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9634
Hand File

014349634
13229: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9647
Hand Diamond Point Chisel

014349647
70-423: RNCC: 3 | RNVC: 2
70-423: RNCC: 3 | RNVC: 9
70-423: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9633
Hand Diamond Point Chisel

014349633
70-419: RNCC: 3 | RNVC: 2
70-419: RNCC: 3 | RNVC: 9
70-419: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9643
Hand File

014349643
13425: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9631
Hand File

014349631
13343: RNCC: 3 | RNVC: 9
13343: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9622
Hand Cold Chisel

014349622
70-361: RNCC: 3 | RNVC: 2
70-361: RNCC: 3 | RNVC: 9
70-361: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9629
Hand Cape Chisel

014349629
70-397: RNCC: 3 | RNVC: 2
70-397: RNCC: 3 | RNVC: 9
70-397: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9628
Hand File

014349628
12967: RNCC: 3 | RNVC: 1
12967: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9626
Hand Cold Chisel

014349626
70-369: RNCC: 3 | RNVC: 2
70-369: RNCC: 3 | RNVC: 9
70-369: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9621
Hand Cape Chisel

014349621
70-391: RNCC: 3 | RNVC: 2
70-391: RNCC: 3 | RNVC: 9
70-391: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9625
Hand File

014349625
12248: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9632
Hand Cape Chisel

014349632
70-395: RNCC: 3 | RNVC: 2
70-395: RNCC: 3 | RNVC: 9
70-395: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9615
Hand File

014349615
06001: RNCC: 3 | RNVC: 9
06001: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9614
Hand Diamond Point Chisel

014349614
70-429: RNCC: 3 | RNVC: 2
70-429: RNCC: 3 | RNVC: 9
70-429: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9613
Hand Cold Chisel

014349613
70-353: RNCC: 3 | RNVC: 2
70-353: RNCC: 3 | RNVC: 9
70-353: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9620
Hand File

014349620
13033: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9617
Metal Cutting Hand Saw

014349617
70-869: RNCC: 3 | RNVC: 2
70-869: RNCC: 3 | RNVC: 9
70-869: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9611
Hand Diamond Point Chisel

014349611
70-427: RNCC: 3 | RNVC: 2
70-427: RNCC: 3 | RNVC: 9
70-427: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9604
Hand File

014349604
04695: RNCC: 3 | RNVC: 9
04695: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9608
Hand File

014349608
04960: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9597
Hand File

014349597
04861: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9610
Hand File

014349610
04828: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9595
Hand Cape Chisel

014349595
70-399: RNCC: 3 | RNVC: 2
70-399: RNCC: 3 | RNVC: 9
70-399: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9596
Hand File

014349596
03896: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9589
Hand File

014349589
13147: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9584
Hand File

014349584
13081: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9590
Hand File

014349590
04762: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9581
Hand Cold Chisel

014349581
70-367: RNCC: 3 | RNVC: 2
70-367: RNCC: 3 | RNVC: 9
70-367: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9578
Hand Cold Chisel

014349578
70-357: RNCC: 3 | RNVC: 2
70-357: RNCC: 3 | RNVC: 9
70-357: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9582
Hand File

014349582
12824: RNCC: 3 | RNVC: 9
12824: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9566
Hand File

014349566
04896: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9572
Diagonal Cutting Pliers

014349572
P56: RNCC: 3 | RNVC: 9
P56: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9573
Hand File

12 Aug 1996

5110-01-434-9569
Diagonal Cutting Pliers

014349569
P54: RNCC: 3 | RNVC: 9
P54: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9575
Hand Cold Chisel

014349575
70-355: RNCC: 3 | RNVC: 2
70-355: RNCC: 3 | RNVC: 9
70-355: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9560
Hand File

014349560
04795: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9562
Hand File

014349562
08673: RNCC: 3 | RNVC: 1
08673: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9558
Diagonal Cutting Pliers

014349558
PMS54G: RNCC: 3 | RNVC: 9
PMS54G: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9543
Hand File

12 Aug 1996

5110-01-434-9541
Hand File

014349541
08704: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9534
Hand File

014349534
06084: RNCC: 3 | RNVC: 9
06084: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9535
Hand File

014349535
08306: RNCC: 3 | RNVC: 9
08306: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9518
Hand File

014349518
06117: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9527
Hand File

014349527
07688: RNCC: 3 | RNVC: 9
07688: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9521
Diagonal Cutting Pliers

014349521
P63: RNCC: 3 | RNVC: 9
P63: RNCC: C | RNVC: 1

12 Aug 1996

5110-01-434-9523
Hand Cold Chisel

12 Aug 1996

5110-01-434-9498
Hand File

014349498
08497: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9476
Hand File

12 Aug 1996

5110-01-434-9481
Hand File

014349481
07719: RNCC: 3 | RNVC: 9
07719: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9468
Hand File

014349468
06034: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9361
Hand File

014349361
05804: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9354
Hand File

014349354
05698: RNCC: 3 | RNVC: 9
05698: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9349
Hand File

014349349
05675: RNCC: 3 | RNVC: 9
05675: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9341
Hand File

014349341
10225: RNCC: 3 | RNVC: 9
10225: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9344
Hand File

014349344
A-A-2312: RNCC: 4 | RNVC: 1
05125: RNCC: 5 | RNVC: 1
05125: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9345
Hand File

014349345
05225: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9338
Hand File

014349338
05738: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9337
Hand File

014349337
10095: RNCC: 3 | RNVC: 9
10095: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9331
Hand File

014349331
05258: RNCC: 3 | RNVC: 9
05258: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9333
Hand File

014349333
08642: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9335
Hand File

014349335
05059: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9328
Hand File

014349328
11559: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9322
Hand File

12 Aug 1996

5110-01-434-9334
Hand File

014349334
05307: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9318
Hand Wire Stripper-Crimper

014349318
WS19H: RNCC: 3 | RNVC: 9
WS19H: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9314
Diagonal Cutting Pliers

014349314
P43: RNCC: 3 | RNVC: 9
P43: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9321
Hand File

014349321
05853: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9312
Hand File

014349312
08529: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9295
Hand Wire Stripper-Crimper

014349295
WS210H: RNCC: 3 | RNVC: 2
WS210H: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9292
Hand File

014349292
05771: RNCC: 3 | RNVC: 9
05771: RNCC: C | RNVC: 1

12 Aug 1996

5110-01-434-9288
Hand File

014349288
05652: RNCC: 3 | RNVC: 9
05652: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9293
Diagonal Cutting Pliers

014349293
S56PH: RNCC: 3 | RNVC: 9
S56PH: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9284
Hand File

014349284
21854: RNCC: 3 | RNVC: 2
9-NF21854: RNCC: 3 | RNVC: 2
12019: RNCC: 3 | RNVC: 2
12019: RNCC: 5 | RNVC: 9
21854: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9285
Hand File

014349285
11592: RNCC: 3 | RNVC: 9
11592: RNCC: 5 | RNVC: 2

12 Aug 1996

5110-01-434-9272
Hand File

014349272
08560: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9280
Hand File

014349280
05194: RNCC: 3 | RNVC: 2

12 Aug 1996

5110-01-434-9269
Hand File

12 Aug 1996

5110-01-434-9228
Hand Half Round Nose Chisel

014349228
70-453: RNCC: 3 | RNVC: 2
70-453: RNCC: 3 | RNVC: 9
70-453: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9223
Hand Half Round Nose Chisel

014349223
70-455: RNCC: 3 | RNVC: 2
70-455: RNCC: 3 | RNVC: 9
70-455: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9174
Hand Rivet Buster Chisel

014349174
70-481: RNCC: 3 | RNVC: 2
70-481: RNCC: 3 | RNVC: 9
70-481: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9172
Hand Half Round Nose Chisel

014349172
70-451: RNCC: 3 | RNVC: 2
70-451: RNCC: 3 | RNVC: 9
70-451: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9180
Hand Cold Chisel Set

014349180
70-561: RNCC: 3 | RNVC: 2
70-561: RNCC: 3 | RNVC: 9
70-561: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9170
Hand Half Round Nose Chisel

014349170
70-449: RNCC: 3 | RNVC: 2
70-449: RNCC: 3 | RNVC: 9
70-449: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-9167
Hand Half Round Nose Chisel

014349167
70-447: RNCC: 3 | RNVC: 2
70-447: RNCC: 3 | RNVC: 9
70-447: RNCC: 5 | RNVC: 9

12 Aug 1996

5110-01-434-7721
Hand Cold Chisel

014347721
102: RNCC: 3 | RNVC: 2
102: RNCC: 5 | RNVC: 9

6 Aug 1996

5110-01-434-7714
Hand Cold Chisel

014347714
106: RNCC: 3 | RNVC: 2
106: RNCC: 5 | RNVC: 9

6 Aug 1996

5110-01-434-7705
Hand Cold Chisel

014347705
109: RNCC: 3 | RNVC: 2
109: RNCC: 5 | RNVC: 9

6 Aug 1996

5110-01-434-4190
Exposed Blade Tube Deburring Tool

014344190
4291A16: RNCC: 3 | RNVC: 2

29 Jul 1996

5110-01-432-5220
Hand Wire Stripper

7 Jun 1996

5110-01-432-3017
Brick Chisel

014323017
777: RNCC: 3 | RNVC: 2
BL414: RNCC: 3 | RNVC: 2
1234-0: RNCC: 3 | RNVC: 2
00018371012348: RNCC: 5 | RNVC: 2

2 Jun 1996

5110-01-432-3296
Double Bit Ax Handle

014323296
883: RNCC: 3 | RNVC: 2

3 Jun 1996

5110-01-432-3299
Single Bit Ax Handle

014323299
882: RNCC: 3 | RNVC: 2

3 Jun 1996

5110-01-432-3151
Electrician's Chisel

014323151
B107.45: RNCC: 3 | RNVC: 1
925: RNCC: 3 | RNVC: 2
470-0: RNCC: 5 | RNVC: 2

3 Jun 1996

5110-01-432-3015
Brick Chisel

014323015
337-0: RNCC: 3 | RNVC: 2
790: RNCC: 3 | RNVC: 2
00018371000352: RNCC: 5 | RNVC: 2

2 Jun 1996

5110-01-432-3149
Plugging Chisel

014323149
476: RNCC: 3 | RNVC: 2
00018371004763: RNCC: 5 | RNVC: 2

3 Jun 1996

5110-01-432-3023
Hand Bull Point Chisel

014323023
480: RNCC: 3 | RNVC: 2
00018371004800: RNCC: 5 | RNVC: 2

2 Jun 1996

5110-01-432-3020
Hand Bull Point Chisel

014323020
478: RNCC: 3 | RNVC: 2

2 Jun 1996

5110-01-432-3019
Hand Bull Point Chisel

014323019
482-0: RNCC: 3 | RNVC: 2
92: RNCC: 3 | RNVC: 2
00018371004824: RNCC: 5 | RNVC: 2

2 Jun 1996

5110-01-432-3021
Hand Bull Point Chisel

014323021
485: RNCC: 3 | RNVC: 2
00018371004855: RNCC: 5 | RNVC: 2

2 Jun 1996

5110-01-432-3022
Hand Bull Point Chisel

014323022
486: RNCC: 3 | RNVC: 2
00018371004862: RNCC: 5 | RNVC: 2

2 Jun 1996

5110-01-432-3018
Brick Chisel

014323018
BL413: RNCC: 3 | RNVC: 2
776: RNCC: 3 | RNVC: 2
1233-0: RNCC: 3 | RNVC: 2
00018371012331: RNCC: 5 | RNVC: 2

2 Jun 1996

5110-01-432-3014
Brick Chisel

014323014
1235-0: RNCC: 3 | RNVC: 2
BL415: RNCC: 3 | RNVC: 2
00018371012355: RNCC: 5 | RNVC: 2

2 Jun 1996

5110-01-432-3016
Brick Chisel

014323016
BL412: RNCC: 3 | RNVC: 2
1232-0: RNCC: 3 | RNVC: 2
00018371012324: RNCC: 5 | RNVC: 2

2 Jun 1996

5110-01-431-6427
Hand Cape Chisel

014316427
1930: RNCC: 3 | RNVC: 9

16 May 1996

5110-01-431-6286
Hand Metal Cutting Shears

16 May 1996

5110-01-431-5866
Hand Metal Cutting Shears

16 May 1996

5110-01-431-5871
Hand Metal Cutting Shears

014315871
210: RNCC: 3 | RNVC: 2

16 May 1996

5110-01-431-4945
Hand Cold Chisel

014314945
1815: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4944
Hand Cold Chisel

014314944
1816: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4940
Hand Cold Chisel

014314940
1809: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4935
Hand Cold Chisel

014314935
1808: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4934
Hand Cold Chisel

014314934
1718: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4939
Hand Cold Chisel

014314939
1814: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4930
Hand Cold Chisel

014314930
1608: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4924
Hand Cold Chisel

014314924
1609: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4925
Hand Cold Chisel

014314925
1818: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4911
Hand Cold Chisel

014314911
1506: RNCC: 3 | RNVC: 1

13 May 1996

5110-01-431-4920
Hand Cold Chisel

014314920
1406: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4915
Hand Cold Chisel

13 May 1996

5110-01-431-4912
Hand Cold Chisel

014314912
1607: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4857
Hand Cold Chisel

13 May 1996

5110-01-431-4856
Hand Cold Chisel

014314856
1205: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4874
Hand Half Round Nose Chisel

014314874
1938: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4883
Hand Rivet Buster Chisel

014314883
B107.48: RNCC: 3 | RNVC: 1
2924: RNCC: 5 | RNVC: 9

13 May 1996

5110-01-431-4880
Hand Half Round Nose Chisel

014314880
1940: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4869
Hand Half Round Nose Chisel

014314869
1941: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4863
Hand Half Round Nose Chisel

014314863
1937: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4864
Hand Half Round Nose Chisel

014314864
1939: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4860
Hand Diamond Point Chisel

014314860
1946: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4803
Hand Cape Chisel

014314803
1934: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4786
Hand Cape Chisel

014314786
1932: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4816
Hand Diamond Point Chisel

014314816
1944: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4811
Hand Diamond Point Chisel

014314811
1943: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4808
Tube Cutter

014314808
7200: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4807
Hand Diamond Point Chisel

014314807
1936: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4794
Hand Cape Chisel

014314794
1951: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4775
Hand Cape Chisel

13 May 1996

5110-01-431-4793
Hand Diamond Point Chisel

014314793
1935: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4787
Hand Cold Chisel

014314787
1918: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4785
Hand Cape Chisel

014314785
1952: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4770
Hand Cape Chisel

014314770
1931: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4772
Hand Cape Chisel

014314772
1933: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4763
Hand Cold Chisel

014314763
1908: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-4764
Hand Cold Chisel

014314764
1912: RNCC: 3 | RNVC: 9

13 May 1996

5110-01-431-3988
Scraping Knife

014313988
PK12SA: RNCC: 3 | RNVC: 2
PK12S: RNCC: 5 | RNVC: 9

12 May 1996

5110-01-431-3961
Scraping Knife

014313961
SP16B: RNCC: 3 | RNVC: 2
SP16A: RNCC: 5 | RNVC: 9

12 May 1996

5110-01-431-3964
Scraping Knife

014313964
SP10B: RNCC: 3 | RNVC: 2
SP10A: RNCC: 5 | RNVC: 9

12 May 1996

5110-01-431-3947
Scraping Knife

014313947
SP8BA: RNCC: 3 | RNVC: 2
SP8A: RNCC: 5 | RNVC: 9

12 May 1996

5110-01-431-3002
Hand Cold Chisel Set

014313002
7318: RNCC: 3 | RNVC: 9

10 May 1996

5110-01-431-2989
Hand Cold Chisel Set

014312989
7302: RNCC: 3 | RNVC: 9

10 May 1996

5110-01-431-1969
General Purpose Scissors

014311969
SS881BCI: RNCC: 3 | RNVC: 2
SS881BC: RNCC: 5 | RNVC: 9

8 May 1996

5110-01-431-1085
Wood Chisel

014311085
47022: RNCC: 3 | RNVC: 2

7 May 1996

5110-01-431-1101
Diagonal Cutting Pliers

014311101
25207: RNCC: 3 | RNVC: 2
25207: RNCC: 3 | RNVC: 9
25207: RNCC: 5 | RNVC: 9

7 May 1996

5110-01-431-1098
Scraping Knife

014311098
PK20M: RNCC: 3 | RNVC: 2

7 May 1996

5110-01-431-1099
Diagonal Cutting Pliers

014311099
25406: RNCC: 3 | RNVC: 2
25406: RNCC: 5 | RNVC: 9

7 May 1996

5110-01-431-1096
Scraping Knife

014311096
SCG23: RNCC: 3 | RNVC: 2

7 May 1996

5110-01-431-1095
Scraping Knife

014311095
PK23M: RNCC: 3 | RNVC: 2

7 May 1996

5110-01-431-1092
Scraping Knife

014311092
SCO22: RNCC: 3 | RNVC: 2

7 May 1996

5110-01-431-1091
Wood Chisel

014311091
47023: RNCC: 3 | RNVC: 2

7 May 1996

5110-01-431-1093
Diagonal Cutting Pliers

014311093
25404: RNCC: 3 | RNVC: 2
25404: RNCC: 3 | RNVC: 9
25404: RNCC: 5 | RNVC: 9

7 May 1996

5110-01-431-1088
Wood Chisel Set

014311088
6-1/2A: RNCC: 3 | RNVC: 2

7 May 1996

5110-01-431-1082
Wood Chisel

014311082
47021: RNCC: 3 | RNVC: 2

7 May 1996

5110-01-431-1081
Wood Chisel

014311081
47020: RNCC: 3 | RNVC: 2

7 May 1996

5110-01-431-0988
Wood Chisel Set

014310988
1436C: RNCC: 3 | RNVC: 9

7 May 1996

5110-01-431-0369

6 May 1996

5110-01-431-0366

6 May 1996

5110-01-431-0364
Metal Cutting Hand Saw

014310364
HS55: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0365

6 May 1996

5110-01-431-0360
File Handle

014310360
FH10D: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0363
Hand Diamond Point Chisel

014310363
DPC6SS: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0368

6 May 1996

5110-01-431-0361

6 May 1996

5110-01-431-0362
Metal Cutting Hand Saw

014310362
HS10: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0336
Hand File

014310336
SF8AB: RNCC: 3 | RNVC: 2
SBF8AB: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-0340
Hand File

014310340
SF8A: RNCC: 3 | RNVC: 2
SBF8A: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-0329
Hand File

014310329
RBF10: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0322
Hand File

014310322
MBF6: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0335
Hand File

014310335
RF8AB: RNCC: 3 | RNVC: 2
RBF8AB: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-0334
Hand File

014310334
RBF8: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0299
Thread Restorer File

014310299
TRM8: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0324
Hand File

014310324
RF8A: RNCC: 3 | RNVC: 2
RBF8A: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-0304
Hand File

014310304
HRF8AB: RNCC: 3 | RNVC: 2
HRB8AB: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-0288
Hand Reamer

014310288
3120RR: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0315
Hand File

014310315
PF5: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0303
Hand File

014310303
TSB8: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0310
Hand File

014310310
MF8A: RNCC: 3 | RNVC: 2
MBF8A: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-0300
Hand Metal Cutting Shears

014310300
TS10: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0280

6 May 1996

5110-01-431-0295
Hand File

014310295
HRB10: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0292
Folding Scissors

014310292
SS22: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0287
Hand File

014310287
RBF12: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0277
Hand File

014310277
MBF14: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0285
Hand Metal Cutting Shears

014310285
TS2: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0291
Hand File

014310291
RBF6: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0276
Hand File

014310276
HRB12: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0275
Hand Metal Cutting Shears

014310275
TS127S: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0283
Hand File

014310283
MF8AB: RNCC: 3 | RNVC: 2
MBF8AB: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-0267
Hand File

014310267
MF4A: RNCC: 3 | RNVC: 2
SF4: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-0272
Hand File

014310272
MF3A: RNCC: 3 | RNVC: 2
SF3: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-0263
Hand File

014310263
HRF8A: RNCC: 3 | RNVC: 2
HRB8A: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-0269
Hand File

014310269
MBF12: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0261
Hand File

014310261
MF1A: RNCC: 3 | RNVC: 2
SF1: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-0260
Hand File

014310260
TSB6: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0255
Hand File

014310255
S12800C: RNCC: 3 | RNVC: 2
MF6A: RNCC: 3 | RNVC: 2
SF6: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-0257
Hand Metal Cutting Shears

014310257
TS1: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0251
Hand Reamer

014310251
KD2044: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0246
Hand File

014310246
MF5A: RNCC: 3 | RNVC: 2
SF5: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-0239
Hand File

014310239
MF2A: RNCC: 3 | RNVC: 2
SF2: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-431-0234
Hand Reamer

014310234
1221RR: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0228
Hand Wire Stripper-Crimper-Cutter

014310228
TCT2000: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0222
Hand Wire Stripper

014310222
TCT15E: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0221
Diagonal Cutting Pliers

014310221
M437G: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0216
Hand Wire Stripper-Crimper

014310216
TCT18E: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0220
Diagonal Cutting Pliers

014310220
M337G: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0219
Hand Terminal Crimping Tool

014310219
TCT12: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0218
Hand Wire Stripper

014310218
TCT7E: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-431-0213
Diagonal Cutting Pliers

014310213
M435G: RNCC: 3 | RNVC: 2

6 May 1996

5110-01-430-9970
Hand Hacksaw Blade

6 May 1996

5110-01-430-9902
Hand Hacksaw Blade

014309902
15-926: RNCC: 3 | RNVC: 2
1HG94: RNCC: 5 | RNVC: 2

6 May 1996

5110-01-430-9849
Hand Hacksaw Blade

014309849
15-955: RNCC: 3 | RNVC: 9
1HG92: RNCC: 5 | RNVC: 2
15-955: RNCC: 5 | RNVC: 9

6 May 1996

5110-01-430-8932
Bearing Scraper

014308932
478: RNCC: 3 | RNVC: 2
42321: RNCC: 5 | RNVC: 2
478: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8655
Hand Hacksaw Blade

014308655
22-224: RNCC: 3 | RNVC: 2
22-224: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-8652
Hand Hacksaw Blade

014308652
22-018: RNCC: 3 | RNVC: 2
22-018: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-8656
Hand Hacksaw Blade

014308656
22-232: RNCC: 3 | RNVC: 2
22-232: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-8649
Hand Hacksaw Blade

014308649
22-324: RNCC: 3 | RNVC: 2
22-324: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-8650
Hand Hacksaw Blade

014308650
22-424: RNCC: 3 | RNVC: 2

3 May 1996

5110-01-430-8651
Hand Hacksaw Blade

014308651
22-432: RNCC: 3 | RNVC: 2
22-432: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-8653
Hand Hacksaw Blade

014308653
22-024: RNCC: 3 | RNVC: 2
22-024: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-8654
Hand Hacksaw Blade

014308654
22-218: RNCC: 3 | RNVC: 2
22-218: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-8648
Hand Hacksaw Blade

014308648
22-318: RNCC: 3 | RNVC: 2
22-318: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-8626
Thread Restorer File

014308626
2249: RNCC: 3 | RNVC: 2
2249: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-8618
Hand Metal Cutting Shears

014308618
23-102C: RNCC: 3 | RNVC: 2

3 May 1996

5110-01-430-8628
Thread Restorer File

014308628
2229: RNCC: 3 | RNVC: 2

3 May 1996

5110-01-430-8614
Hand Metal Cutting Shears

014308614
23-101C: RNCC: 3 | RNVC: 2
23-101C: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-8615
Hand Metal Cutting Shears

014308615
23-100C: RNCC: 3 | RNVC: 2

3 May 1996

5110-01-430-8503
Hand Hacksaw Blade

014308503
61229: RNCC: 3 | RNVC: 2
61229: RNCC: 3 | RNVC: 9
61229: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8501
Hand Hacksaw Blade

014308501
61227: RNCC: 3 | RNVC: 2
61227: RNCC: 3 | RNVC: 9
61227: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8499
Hand Hacksaw Blade

014308499
61226: RNCC: 3 | RNVC: 2
61226: RNCC: 3 | RNVC: 9
61226: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8504
Hand Hacksaw Blade

014308504
61230: RNCC: 3 | RNVC: 2
61230: RNCC: 3 | RNVC: 9
61230: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8500
Hand Hacksaw Blade

014308500
61228: RNCC: 3 | RNVC: 2
61228: RNCC: 3 | RNVC: 9
61228: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8496
Hand Hacksaw Blade

014308496
61214: RNCC: 3 | RNVC: 2
61214: RNCC: 3 | RNVC: 9
61214: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8508
Hand Hacksaw Blade

014308508
61231: RNCC: 3 | RNVC: 2
61231: RNCC: 3 | RNVC: 9
61231: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8497
Metal Cutting Hand Saw

014308497
61017: RNCC: 3 | RNVC: 2
61017: RNCC: 3 | RNVC: 9
61017: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8493
Metal Cutting Hand Saw

014308493
61015: RNCC: 3 | RNVC: 2
61015: RNCC: 3 | RNVC: 9
61015: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8490
Hand Cold Chisel Set

014308490
25658: RNCC: 3 | RNVC: 2
25658: RNCC: 3 | RNVC: 9
25658: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8494
Metal Cutting Hand Saw

014308494
61010: RNCC: 3 | RNVC: 2
61010: RNCC: 3 | RNVC: 9
61010: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8489
Hand Cold Chisel

014308489
25650: RNCC: 3 | RNVC: 2
25650: RNCC: 3 | RNVC: 9
25650: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8487
Hand Cold Chisel

014308487
25649: RNCC: 3 | RNVC: 2
25649: RNCC: 3 | RNVC: 9
25649: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8446
Hand Cold Chisel

014308446
25665: RNCC: 3 | RNVC: 2
25665: RNCC: 3 | RNVC: 9
25665: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8430
Hand Cape Chisel

014308430
25662: RNCC: 3 | RNVC: 2
25662: RNCC: 3 | RNVC: 9
25662: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8442
Hand Cold Chisel

014308442
25664: RNCC: 3 | RNVC: 2
25664: RNCC: 3 | RNVC: 9
25664: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8434
Hand Diamond Point Chisel

014308434
25660: RNCC: 3 | RNVC: 2
25660: RNCC: 3 | RNVC: 9
25660: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8437
Hand Half Round Nose Chisel

014308437
25661: RNCC: 3 | RNVC: 2
25661: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8423
Hand Diamond Point Chisel

014308423
25659: RNCC: 3 | RNVC: 2
25659: RNCC: 3 | RNVC: 9
25659: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8433
Hand Cape Chisel

014308433
25663: RNCC: 3 | RNVC: 2
25663: RNCC: 3 | RNVC: 9
25663: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8409
Hand Cold Chisel

014308409
25654: RNCC: 3 | RNVC: 2
25654: RNCC: 3 | RNVC: 9
25654: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8419
Hand Cold Chisel

014308419
25657: RNCC: 3 | RNVC: 2
25657: RNCC: 3 | RNVC: 9
25657: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8418
Hand Cold Chisel

014308418
25655: RNCC: 3 | RNVC: 2
25655: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8402
Hand Cold Chisel

014308402
25652: RNCC: 3 | RNVC: 2
25652: RNCC: 3 | RNVC: 9
25652: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8411
Hand Cold Chisel

014308411
25656: RNCC: 3 | RNVC: 2
25656: RNCC: 3 | RNVC: 9
25656: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8405
Hand Cold Chisel

014308405
25651: RNCC: 3 | RNVC: 2
25651: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-8372
Hand Rivet Buster Chisel

014308372
B107.48: RNCC: 3 | RNVC: 1
B107.48 TY1CL3: RNCC: 5 | RNVC: 1
25666: RNCC: 5 | RNVC: 9
25666: RNCC: 5 | RNVC: 9
25666: RNCC: C | RNVC: 1

3 May 1996

5110-01-430-7693
Hand Wire Stripper-Crimper

014307693
2162: RNCC: 3 | RNVC: 2
2162: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-7507
Hand File

014307507
2153: RNCC: 3 | RNVC: 2
2153: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-7505
Metal Cutting Hand Saw

014307505
21-045C: RNCC: 3 | RNVC: 2

3 May 1996

5110-01-430-7439
Hand Diamond Point Chisel

014307439
33-161: RNCC: 3 | RNVC: 2
33-161: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-7441
Hand Wire Stripper

014307441
2154: RNCC: 3 | RNVC: 2
2154: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-7443
Craftsman's Knife

014307443
31-101C: RNCC: 3 | RNVC: 9
31-101C: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-7444
Craftsman's Knife

014307444
31-200C: RNCC: 3 | RNVC: 9
31-200C: RNCC: 5 | RNVC: 9

3 May 1996

5110-01-430-7440
Hand Diamond Point Chisel

014307440
33-160: RNCC: 3 | RNVC: 2
33-160: RNCC: 3 | RNVC: 9

3 May 1996

5110-01-430-6835
Hand Half Round Nose Chisel

2 May 1996

5110-01-430-6840
Hand Half Round Nose Chisel

2 May 1996

5110-01-430-6841
Hand Cold Chisel Set

2 May 1996

5110-01-430-6831
Hand Diamond Point Chisel

2 May 1996

5110-01-430-6823
Hand Cape Chisel

2 May 1996

5110-01-430-6826
Hand Diamond Point Chisel

2 May 1996

5110-01-430-6812

2 May 1996

5110-01-430-6790
Hand Half Round Nose Chisel

2 May 1996

5110-01-430-6785
Hand Cape Chisel

2 May 1996

5110-01-430-6789
Hand Half Round Nose Chisel

2 May 1996

5110-01-430-6788
Hand Half Round Nose Chisel

2 May 1996

5110-01-430-6791
Hand Cold Chisel Set

2 May 1996

5110-01-430-6783
Hand Diamond Point Chisel

2 May 1996

5110-01-430-6787
Hand Diamond Point Chisel

2 May 1996

5110-01-430-6786
Hand Diamond Point Chisel

2 May 1996

5110-01-430-6704
Hand Cold Chisel

2 May 1996

5110-01-430-6645
Hand Wire Stripper

014306645
3420: RNCC: 3 | RNVC: 9

2 May 1996

5110-01-430-6697
Hand Cold Chisel

2 May 1996

5110-01-430-6694
Hand Cold Chisel

2 May 1996

5110-01-430-6679
Hand Cold Chisel

2 May 1996

5110-01-430-6668
Hand Wire Stripper

014306668
84-213: RNCC: 3 | RNVC: 2
6R637: RNCC: 5 | RNVC: 2

2 May 1996

5110-01-430-6615
Hand Cold Chisel

2 May 1996

5110-01-430-6627
Hand Cold Chisel

2 May 1996

5110-01-430-6617
Hand Cold Chisel

2 May 1996

5110-01-430-6624
Hand Cold Chisel

2 May 1996

5110-01-430-6610
Woodworking Butt Chisel Set

014306610
3034C: RNCC: 3 | RNVC: 9

2 May 1996

5110-01-430-6618
Woodworking Butt Chisel Set

2 May 1996

5110-01-430-6611
Hand Cold Chisel

2 May 1996

5110-01-430-6593
Hand Cold Chisel

2 May 1996

5110-01-430-6603

2 May 1996

5110-01-430-6604
Hand Cold Chisel

2 May 1996

5110-01-430-6592
Hand Cold Chisel

2 May 1996

5110-01-430-6591

2 May 1996

5110-01-430-6586

2 May 1996

5110-01-430-6588
Hand Wire Stripper

014306588
69: RNCC: 3 | RNVC: 2
41036: RNCC: 5 | RNVC: 2
046X069: RNCC: 5 | RNVC: 2
69: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-430-6578

2 May 1996

5110-01-430-6587
Hand Wire Stripper-Crimper

2 May 1996

5110-01-430-6574

2 May 1996

5110-01-430-6536
Hand Cape Chisel

2 May 1996

5110-01-430-6534
Hand Wire Stripper-Crimper-Cutter

014306534
3421: RNCC: 3 | RNVC: 9

2 May 1996

5110-01-430-6531
Hand Cape Chisel

2 May 1996

5110-01-430-6505
Hand Cold Chisel

2 May 1996

5110-01-430-6517
Hand Cold Chisel

2 May 1996

5110-01-430-6499
Hand Cold Chisel

2 May 1996

5110-01-430-6490

2 May 1996

5110-01-430-6486
Hand Cold Chisel

2 May 1996

5110-01-430-6432
Hand Cold Chisel Set

2 May 1996

5110-01-430-6424
Hand Cape Chisel

2 May 1996

5110-01-430-6415
Hand Cape Chisel

2 May 1996

5110-01-430-6417
Hand Cape Chisel

2 May 1996

5110-01-430-6408
Hand Cold Chisel

2 May 1996

5110-01-430-6407
Hand Cape Chisel

2 May 1996

5110-01-430-6405
Hand Cold Chisel

2 May 1996

5110-01-430-6396
Hand Cold Chisel

2 May 1996

5110-01-430-6390
Hand Cold Chisel

2 May 1996

5110-01-430-6340
Hand Wire Stripper-Crimper-Cutter

2 May 1996

5110-01-430-6272
Wood Chisel

014306272
73: RNCC: 3 | RNVC: 2

2 May 1996

5110-01-430-6269
Wood Chisel

014306269
75: RNCC: 3 | RNVC: 2

2 May 1996

5110-01-430-6259
Hand Cold Chisel

014306259
116: RNCC: 3 | RNVC: 2
116: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-430-6252
Hand Cold Chisel

014306252
115: RNCC: 3 | RNVC: 2
115: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-430-6240
Hand Cold Chisel

014306240
112: RNCC: 3 | RNVC: 2
112: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-430-6241
Hand Cold Chisel

014306241
114: RNCC: 3 | RNVC: 2
114: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-430-6237
Hand Cold Chisel

014306237
110: RNCC: 3 | RNVC: 2
110: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-430-6238
Hand Cold Chisel

014306238
111: RNCC: 3 | RNVC: 2
111: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-430-6191
Nested Saws

014306191
15-190: RNCC: 3 | RNVC: 1

2 May 1996

5110-01-430-6155
Nested Saws

014306155
15-090: RNCC: 3 | RNVC: 2
15-090: RNCC: 5 | RNVC: 2
5R763: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-430-6117
Craftsman's Knife

014306117
9000: RNCC: 3 | RNVC: 2

2 May 1996

5110-01-430-6100
Hand Hacksaw Blade

014306100
15-928A: RNCC: 3 | RNVC: 2
5R899: RNCC: 5 | RNVC: 2

2 May 1996

5110-01-430-6064

2 May 1996

5110-01-430-6054

2 May 1996

5110-01-430-6040

2 May 1996

5110-01-430-6036
Hand Hacksaw Blade

014306036
15-928: RNCC: 3 | RNVC: 2
5R897: RNCC: 5 | RNVC: 2

2 May 1996

5110-01-430-6044

2 May 1996

5110-01-430-6013
Hand Hacksaw Blade

014306013
15-908A: RNCC: 3 | RNVC: 2
5R890: RNCC: 5 | RNVC: 2

2 May 1996

5110-01-430-6025
Hand Cold Chisel

014306025
104: RNCC: 3 | RNVC: 2
104: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-430-6016
Hand Hacksaw Blade

014306016
15-924A: RNCC: 3 | RNVC: 2
5R896: RNCC: 5 | RNVC: 2

2 May 1996

5110-01-430-6011
Hand Hacksaw Blade

014306011
15-924: RNCC: 3 | RNVC: 9
5R894: RNCC: 5 | RNVC: 2
15-924: RNCC: 5 | RNVC: 9

2 May 1996

5110-01-430-6006
Hand Hacksaw Blade

014306006
15-902: RNCC: 3 | RNVC: 2
5R882: RNCC: 5 | RNVC: 2

2 May 1996

5110-01-430-5991
Hand Hacksaw Blade

014305991
15-804: RNCC: 3 | RNVC: 2
5R867: RNCC: 5 | RNVC: 2

2 May 1996

5110-01-430-5965
Hand Hacksaw Blade

014305965
15-828: RNCC: 3 | RNVC: 2
5R879: RNCC: 5 | RNVC: 2

2 May 1996

5110-01-430-5962

2 May 1996

5110-01-430-5986
Hand Hacksaw Blade

014305986
15-922: RNCC: 3 | RNVC: 2
5R891: RNCC: 5 | RNVC: 2

2 May 1996

5110-01-430-5978
Hand Hacksaw Blade

014305978
15-904: RNCC: 3 | RNVC: 2
5R885: RNCC: 5 | RNVC: 2

2 May 1996

5110-01-430-5955
Hand Wire Stripper

014305955
958: RNCC: 3 | RNVC: 2

2 May 1996

5110-01-430-5953
Hand Hacksaw Blade

014305953
15-808: RNCC: 3 | RNVC: 2
5R870: RNCC: 5 | RNVC: 2

2 May 1996

5110-01-430-5939
Cable Saw

1 Jan 1900

5110-01-430-5952
Hand Hacksaw Blade

014305952
15-908: RNCC: 3 | RNVC: 2
5R888: RNCC: 5 | RNVC: 2

2 May 1996

5110-01-430-5930
Hand Hacksaw Blade

014305930
15-802: RNCC: 3 | RNVC: 2
5R864: RNCC: 5 | RNVC: 2

2 May 1996

5110-01-430-5919
Nested Saws

014305919
15-191: RNCC: 3 | RNVC: 1

2 May 1996

5110-01-430-5455
Craftsman's Knife

1 May 1996

5110-01-430-5258
Hand File Set

30 Apr 1996

5110-01-430-5338
Contact Point Dresser

1 May 1996

5110-01-430-5259
Hand File Set

014305259
HBF500BL: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5318
Contact Point Dresser

1 May 1996

5110-01-430-5257

30 Apr 1996

5110-01-430-5253
Hand File Set

014305253
CF310K: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5252
Hand File Set

014305252
CF308K: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5249
Hand File Set

014305249
HRB3K: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5250
Hand File Set

014305250
MBF4K: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5254
Hand File Set

014305254
HBF300G: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5255
Hand File Set

014305255
HBF300O: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5246
Pocket Knife

014305246
APG1: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5247
Hand File Set

30 Apr 1996

5110-01-430-5245
Knife Blade

014305245
PK200-B: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5248
Hand File Set

014305248
S12800: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5229
Tube Cutter Cutting Wheel

014305229
TC127F-B: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5240
Hand File Set

014305240
HBF300BL: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5242
Hand Operated Cable Cutter

014305242
BCC3: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5243
Hand Operated Cable Cutter

014305243
PBC911: RNCC: 3 | RNVC: 2
BCC60: RNCC: 5 | RNVC: 9

30 Apr 1996

5110-01-430-5235
Knife Blade

014305235
PK300-B: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5231
Pocket Knife

014305231
PK1080: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5237
Hand File Set

014305237
RBF4K: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5233
Sportsman's Knife

014305233
GK5803: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5228
Scraping Knife

014305228
SCO27: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5226
Tube Cutter

30 Apr 1996

5110-01-430-5224
Tube Cutter Cutting Wheel

014305224
TC160C: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5218
Hand File Set

014305218
HBF200BL: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5222
Hand File Set

014305222
HBF200O: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5214
Hand File Set

30 Apr 1996

5110-01-430-5201
Hand File Set

014305201
HBF200Y: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5158
Scraping Knife

014305158
SCO25: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5151
Scraping Knife

014305151
SCO24: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5150
Scraping Knife

014305150
SCO23: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5149
Scraping Knife

014305149
SCO21: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5146
Scraping Knife

014305146
SCG24: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5143
Scraping Knife

014305143
SCG21: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5136
Scraping Knife

014305136
PK23RM: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5134
Scraping Knife

014305134
PK23B: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5133
Hand Metal Cutting Shears

014305133
TS20L: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5128
Scraping Knife

014305128
PK21B: RNCC: 3 | RNVC: 2

30 Apr 1996

5110-01-430-5119
Scraping Knife

014305119
PK25B: RNCC: 3 | RNVC: 2

30 Apr 1996

Load More Results