What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 79 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 79of 112

5110-66-147-6062
Tube Reamer

5110-15-234-1199
Manico Per Lima

152341199
511015E032588: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-34-030-0583
Tinner's Hollow Cutting Punch

340300583
OREA 761: RNCC: 3 | RNVC: 2
OREA 761: RNCC: 6 | RNVC: 9

4 Jul 2003

5110-15-161-8186
Lima Piatta Beta 10

151618186
LIMA PIATTA BETA 10'': RNCC: 3 | RNVC: 2

1 Oct 2000

5110-12-126-3079
Craftsman's Knife

121263079
121-260: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-140-0049
Spatola Con Manico

151400049
54100: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-98-205-4738
Rabbet Plane

982054738
DFAMPD00183: RNCC: 2 | RNVC: 2

11 Oct 2000

5110-15-161-8282
Cutter Lama Spezzab

151618282
1771001: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-14-468-4137
Tube Cutter Cutting Wheel

144684137
167620: RNCC: 3 | RNVC: 2
338A.F5: RNCC: 3 | RNVC: 2
3148511676202: RNCC: 5 | RNVC: 2

25 Feb 1994

5110-12-195-7567
Hand File

121957567
1212R-200MM-3: RNCC: 3 | RNVC: 2

11 Apr 1983

5110-27-015-5545
Hand File

270155545
14001YP21637: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-15-136-2215
Testa Di Ricambio P

151362215
1100R1050: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-27-006-6518
Hand File

270066518
E104206: RNCC: 2 | RNVC: 1
E104206: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-21-104-9854
Turning Chisel

211049854
476: RNCC: 3 | RNVC: 1

4 Jun 1968

5110-14-527-0334
Enclosed Blade Tube Deburring Tool

145270334
D9850-14M1410: RNCC: 3 | RNVC: 2

26 Sep 2001

5110-99-781-7056

5110-66-150-2344
Scraping Knife

661502344
NO PRIMARY REF 66-150-2344: RNCC: 3 | RNVC: 2
00408656: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-14-244-0915

5110-15-212-2867
Assortimento

152122867
EX5110RN0648614: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-3497
Scalpello

152083497
3SANMMPPZ200X26: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-244-0876

5110-41-002-1622
Hand File

410021622
525: RNCC: 3 | RNVC: 2

1 Feb 2013

5110-12-384-8370
Diagonal Cutting Pliers

123848370
46.000.124: RNCC: 3 | RNVC: 2

4 Apr 2011

5110-99-911-5316
Hacksaw Frame

999115316
40PG: RNCC: 3 | RNVC: 2

22 Sep 1992

5110-21-639-4059
Single Bit Ax Handle

216394059
39GP10: RNCC: 4 | RNVC: 1
REVM: RNCC: 6 | RNVC: 9

12 Feb 1970

5110-21-639-4843
Hand File

216394843
39GP53: RNCC: 4 | RNVC: 1

29 Oct 1963

5110-66-013-5571
Hand File

660135571
WARDING6IN: RNCC: 3 | RNVC: 1
00809642: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-21-639-5238
Hand Cold Chisel

216395238
C22: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-27-047-2948
Tailor's Shears

270472948
350618: RNCC: 2 | RNVC: 1

19 Nov 2009

5110-99-120-2183
Hand Reamer

991202183
BS3088: RNCC: 4 | RNVC: 1
H6: RNCC: 5 | RNVC: 2
H20741: RNCC: 5 | RNVC: 2
H02741: RNCC: 5 | RNVC: 2
DEFSTAN51-9: RNCC: 6 | RNVC: 9
1G259: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-155-9488
Hand Wire Stripper

121559488
NM225: RNCC: 3 | RNVC: 2
NM225: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-363-6919
Glass Cutter

123636919
BO 4000.0E: RNCC: 3 | RNVC: 2

15 Jul 2004

5110-15-208-4908
Alesatore Serie

152084908
3AANGERMNN11S8A31-5CN: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-210-8588
Utensile Di Precisi

152108588
3759: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-131-7511
Scraping Knife

661317511
CSB10: RNCC: 3 | RNVC: 2

7 Dec 1988

5110-98-851-7357
Hand File

988517357
8 IN MAGICUT FLAT: RNCC: 3 | RNVC: 1
WUNDACUT WILTSHIRE: RNCC: 3 | RNVC: 1

2 Dec 1976

5110-21-905-9634
Cross Chisel

219059634
W5751171: RNCC: 3 | RNVC: 2

4 Mar 1989

5110-15-165-4140
Serie 6 Estrattori

151654140
95SE6: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4165
Fustelle In Serie D

151654165
37034A40: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-120-6802
Lochpfeife

121206802
317-3: RNCC: 3 | RNVC: 2

30 May 1969

5110-27-015-8820
Hand Metal Cutting Shears

270158820
99999-NIIN-DA0034248: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-15-074-6192
File Holder

150746192
12UNART110PIATTAPARALLELA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-58-000-0718
Single Bit Ax

580000718
121131: RNCC: 3 | RNVC: 2

24 Oct 2008

5110-12-362-5187
Diagonal Cutting Pliers

123625187
54.0084.960.59: RNCC: 3 | RNVC: 2
2678B: RNCC: 5 | RNVC: 2

4 Mar 2004

5110-12-127-2871
Ventilsitzf Halter

121272871
4623A: RNCC: 3 | RNVC: 2

30 May 1969

5110-17-015-5969
Hand File

170155969
TVA5110-2-263-006-1.1.2: RNCC: 3 | RNVC: 2
TVA5110-2-263-006: RNCC: 5 | RNVC: 1
12000402: RNCC: 5 | RNVC: 2
1127: RNCC: 5 | RNVC: 9

17 Jun 1972

5110-15-123-6402
Lima A Coltello Con

151236402
2605/2-10: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-66-016-5091
Recess Cutter

660165091
124003: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-99-458-1228

5110-15-000-6737
Shear

150006737
B21000300: RNCC: 3 | RNVC: 2

28 Mar 2013

5110-37-507-4960
Diagonal Cutting Pliers

375074960
80065169: RNCC: 3 | RNVC: 2
T6EA014: RNCC: 5 | RNVC: 2

17 Nov 2000

5110-15-165-4107
Lama Per Seghetto I

151654107
A2643G: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-121-4525
Diagonal Cutting Pliers

151214525
TW4.0000.100.88: RNCC: 3 | RNVC: 2
TW4.0000.100.88: RNCC: 5 | RNVC: 9

31 May 1996

5110-17-109-7494
Hand Hacksaw Frame

171097494
218: RNCC: 3 | RNVC: 2
JUNIOR: RNCC: 3 | RNVC: 2
1400046: RNCC: 5 | RNVC: 2

23 Jan 1996

5110-66-151-8817
Diagonal Cutting Pliers

661518817
28225: RNCC: 3 | RNVC: 2

19 Feb 2004

5110-15-197-2558
Screw Thread Insert Breaker

151972558
PN UAS 00025863: RNCC: 3 | RNVC: 2
5120F76011989: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-27-019-8375
Hand Cape Chisel

270198375
10091KISK0014: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-27-000-7816
Diagonal Cutting Pliers

270007816
3510 45 0115: RNCC: 2 | RNVC: 1
3510 49 0115: RNCC: 2 | RNVC: 1
3510 19 0115: RNCC: 3 | RNVC: 2
3510490115: RNCC: 5 | RNVC: 9

11 Jun 1991

5110-15-208-4987
Scalpello Per Mecca

152084987
3SANMMPUZ300X16: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-160-2861
Tronchese

151602861
F720116931: RNCC: 2 | RNVC: 2

6 Oct 2000

5110-14-540-7914
Straight Trimmers Shears

145407914
CISAILLECRANBOS: RNCC: 3 | RNVC: 2
CICAILLECRANBOS: RNCC: 5 | RNVC: 2

23 Apr 2004

5110-98-205-4747
Hand Metal Cutting Shears

982054747
DFAMPD00186: RNCC: 2 | RNVC: 2

12 Oct 2000

5110-27-014-8918
Hand Reamer

270148918
3455ATF16392: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-20-004-7584
Hand File

200047584
FFS10: RNCC: 3 | RNVC: 2

20 Apr 2009

5110-19-005-1563
Rigid Handle Machete

190051563
26621018: RNCC: 3 | RNVC: 2

12 Jul 2013

5110-27-014-8925
Hand Reamer

270148925
3455ATF16400: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-33-158-4997
Firmer Chisel

331584997
119.140: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-12-137-9215
Double Bow Cutting Punch

121379215
606227: RNCC: 3 | RNVC: 2
240-29: RNCC: 5 | RNVC: 2

30 May 1969

5110-21-866-8553

5110-15-209-0610
Assortimento Di 6 L

152090610
0669200: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-639-3966
Single Bit Ax

216393966
39GP3: RNCC: 4 | RNVC: 1
REVA: RNCC: 6 | RNVC: 9

23 Jul 1969

5110-27-019-4627
Hand File

270194627
10091KEGE0109: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-141-4759
Cesoia Ds

151414759
694401260: RNCC: 3 | RNVC: 2

9 Jun 1997

5110-17-029-6913
Hand Reamer

170296913
K13,5-15,5: RNCC: 3 | RNVC: 2
K13,5-15,5: RNCC: 5 | RNVC: 9
K13-5-15-5: RNCC: 6 | RNVC: 9
K13-5T0T15-5: RNCC: 6 | RNVC: 9

15 May 1970

5110-25-102-9907
Hand File

251029907
14SBF5110HVK2: RNCC: 2 | RNVC: 1
FS 5110-0641 POS 7: RNCC: 2 | RNVC: 2
329DF: RNCC: 3 | RNVC: 2
48300130: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-99-910-6472
Hand Metal Stamping Die Set

999106472
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
01304071: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H2607: RNCC: 6 | RNVC: 9
H2607: RNCC: 6 | RNVC: 9
FA17792: RNCC: 6 | RNVC: 9
H2607: RNCC: 6 | RNVC: 9
1C2357: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-165-3821
Lima Per Meccanica

151653821
256518: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-304-6762

5110-14-539-4411
Hand Metal Cutting Shears

145394411
883B: RNCC: 3 | RNVC: 2
3148516295200: RNCC: 5 | RNVC: 2

14 Jan 2004

5110-14-451-9727
Hand Operated Cable Cutter

144519727
413A.32: RNCC: 3 | RNVC: 2
3148511754887: RNCC: 5 | RNVC: 2
0175488: RNCC: 5 | RNVC: 9
413.A32: RNCC: 5 | RNVC: 9

16 Dec 1991

5110-25-116-2769
Finer Sag

251162769
02774: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-21-639-5810
Hand Metal Stamping Die Set

216395810
101: RNCC: 3 | RNVC: 1
1550: RNCC: 3 | RNVC: 1
GGGD280: RNCC: 4 | RNVC: 1
1F146200: RNCC: 5 | RNVC: 9
313415: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-17-118-6394
Sawing Jig

171186394
CH3110LDW: RNCC: 3 | RNVC: 2

13 Jun 2006

5110-17-025-4477
Hand File

170254477
5001506-5: RNCC: 3 | RNVC: 2
350092K7LIGPL14: RNCC: 3 | RNVC: 2
3014404K2LIGPL21: RNCC: 3 | RNVC: 2

14 May 1970

5110-99-942-0153
Hand Reamer

999420153
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16345: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-214-0798
Serie Pettini Da 1

152140798
Q300225: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-560-9865
Diagonal Cutting Pliers

145609865
416.12E: RNCC: 3 | RNVC: 2
175524: RNCC: 5 | RNVC: 2
3148511755242: RNCC: 5 | RNVC: 2

4 Jun 2009

5110-15-137-4801
Per Dadi Ing Chiave

151374801
830: RNCC: 3 | RNVC: 2
830: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-192-5006
Supporto Chiavi Com

151925006
420090: RNCC: 3 | RNVC: 2
(241)AJ236420090: RNCC: 5 | RNVC: 2

22 Mar 2010

5110-99-911-1890
Hand Reamer

999111890
ST13: RNCC: 3 | RNVC: 2

29 Jan 1998

5110-14-573-6714
End Cutting Nippers

145736714
412.42: RNCC: 3 | RNVC: 2
0175483: RNCC: 5 | RNVC: 2
175483: RNCC: 5 | RNVC: 2

31 Oct 2012

5110-21-920-1420
Hand File

219201420
HSM14: RNCC: 3 | RNVC: 2

25 May 1999

5110-15-209-2386
Forbici Per Erba

152092386
FORBICIERBA: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-27-011-7718
Hand Reamer

270117718
10111KR500: RNCC: 2 | RNVC: 1
09013KR1048: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-206-3993
Hand Cable Stripper

152063993
9025134: RNCC: 3 | RNVC: 2
(241)A67199025134: RNCC: 5 | RNVC: 2

5 Jun 2012

5110-14-249-8213
Hand Diamond Point Chisel

142498213
M0B49S120: RNCC: 3 | RNVC: 2
2103: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-27-014-8917
Hand Reamer

270148917
3455ATF16391: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-21-865-0037
Single Bit Ax

218650037
7216: RNCC: 3 | RNVC: 2
16: RNCC: 5 | RNVC: 2

17 Feb 1972

5110-21-888-3985
Wood Scraper

218883985
H250: RNCC: 3 | RNVC: 2

21 Mar 1982

5110-14-480-1648
Tube Cutter Cutting Wheel

144801648
238M.5: RNCC: 3 | RNVC: 2
0155205: RNCC: 5 | RNVC: 2
3148511552056: RNCC: 5 | RNVC: 2

22 Feb 1996

5110-21-901-6809
Knockout Punch And Die Set

219016809
730: RNCC: 3 | RNVC: 1

11 Dec 1986

5110-25-110-8991

5110-99-607-2225

5110-99-607-1439

5110-66-039-2121
Valve Seat Cutter

660392121
144402: RNCC: 3 | RNVC: 2

23 Apr 1971

5110-66-086-8313
Hand Reamer

660868313
652 3644: RNCC: 3 | RNVC: 2

23 Aug 1976

5110-66-011-4825
Hand Reamer

660114825
606A01250: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-66-125-3407
Brick Chisel

661253407
605: RNCC: 3 | RNVC: 2

3 Apr 1986

5110-21-895-4543
Stone Brick Cutter

218954543
11313: RNCC: 3 | RNVC: 2

27 May 1984

5110-99-291-1343
Craftsman's Knife

992911343
10504239: RNCC: 3 | RNVC: 2
5 706915 042399: RNCC: 5 | RNVC: 2

18 May 2005

5110-34-037-4128
Allen K Socket

340374128
22202204: RNCC: 5 | RNVC: 2

1 Oct 2009

5110-98-205-4760
Hand Reamer

982054760
DFAMPD00207 J: RNCC: 2 | RNVC: 2

12 Oct 2000

5110-15-141-1056
Tronchese A Taglio

151411056
405.12MT: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-186-4528
Tronchesina

151864528
4444123: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-14-244-0818

5110-14-529-7851
Hand Metal Stamping Die Set

145297851
293A-5: RNCC: 3 | RNVC: 2
3148511663417: RNCC: 5 | RNVC: 2

10 Apr 2002

5110-15-191-4122
Spazzola

151914122
505670: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-25-106-4349
Hand Cold Chisel

251064349
3533026: RNCC: 3 | RNVC: 2
6172677: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-21-883-1747
Riffler

218831747
STYLE10: RNCC: 3 | RNVC: 1
941096: RNCC: 5 | RNVC: 2

27 Jan 1981

5110-15-208-4894
Pialla

152084894
5PLECNDL46X250: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4700
Lima

152084700
3LTRPQCND0N400X40: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-103-3419
Bolt Cutter

251033419
1SBF5110HVK5: RNCC: 2 | RNVC: 1

1 Jan 1984

5110-15-212-8747
Flangiatubi Univers

152128747
525F: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-370-5765
Hand Operated Cable Cutter

123705765
9536280: RNCC: 3 | RNVC: 2
01.88.86.68: RNCC: 5 | RNVC: 2
4003773026891: RNCC: 5 | RNVC: 2

24 Nov 2006

5110-14-484-8707
Poi Sabre D'abattis

144848707
SABRE D'ABATIS PLIANT NU.77000.: RNCC: 3 | RNVC: 2

12 Dec 1996

5110-17-118-0066
Uitsteekmes

171180066
LISTA 90.922: RNCC: 3 | RNVC: 2

20 Oct 2005

5110-17-109-7096
Paper Cutter

171097096
MEYERS, FORMAAT A3, TYPE 460: RNCC: 3 | RNVC: 2
3967091: RNCC: 3 | RNVC: 2
0501275: RNCC: 5 | RNVC: 2

9 Jan 1996

5110-15-220-6324
Lama Per Tagliabals

152206324
944.S9L10: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-244-3658

5110-14-264-9034

5110-99-910-5004
Hand File

999105004
COORDPATH4034: RNCC: 2 | RNVC: 2
H20298: RNCC: 5 | RNVC: 2
1A3859: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9
FA13305: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-309-3532
Hand Reamer

123093532
DIN206-B6,5-HSS: RNCC: 2 | RNVC: 2
F1131-6,5: RNCC: 3 | RNVC: 2
301-FORM B-6,5: RNCC: 3 | RNVC: 2

19 Jan 1987

5110-15-208-4866
Cesoia

152084866
4KCAITDX220: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-490-8861
Alesoir

144908861
4067 010 001 940: RNCC: 3 | RNVC: 2
F300 0T 000 5133: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-27-019-8369
Hand Cape Chisel

270198369
10091KISK0007: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-27-019-4352
Hand File

270194352
10091KEGE0015: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-213-6661
Kit Montaggio Inser

152136661
SRM0305D: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-340-3486
Diagonal Cutting Pliers

123403486
SPEZIALSCHERE F. GURTFESSEL: RNCC: 3 | RNVC: 2

28 Mar 1996

5110-21-637-4383
Adjustable Re Pilot

216374383
H 5/P: RNCC: 3 | RNVC: 2
1B: RNCC: 3 | RNVC: 2
5: RNCC: 5 | RNVC: 2

30 Nov 1965

5110-25-114-2802
Saw Handle

251142802
0901728: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-26-301-1986
Pliers

263011986
PV018: RNCC: 3 | RNVC: 2

26 Jun 2013

5110-12-122-2565
Hand Reamer

121222565
4SPIRALGENUTET: RNCC: 3 | RNVC: 2

30 May 1969

5110-12-122-2493
Hand Reamer

121222493
10SPIRALGENUTET: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-230-5796
Tenaglie

152305796
1098PL/280: RNCC: 3 | RNVC: 2
511015E126425: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-123-6214
Lima Piatta Paralle

151236214
2560/3D10: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-368-9828
Double Bow Cutting Punch

123689828
0100670: RNCC: 3 | RNVC: 2
00.09.52.79: RNCC: 5 | RNVC: 2

10 May 2006

5110-15-237-8735
Lime Raspe Legno (6

152378735
2010-2040: RNCC: 3 | RNVC: 2
511015E067970: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-172-7184
Spingipezzuola 9 Mm

151727184
SPINGIPEZZUOLA 9 MM.KLEEN BORE J: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-17-123-8110
Ruimer

171238110
8C3028NSCMB5416: RNCC: 3 | RNVC: 2
8C3028: RNCC: 5 | RNVC: 2

13 Jul 2011

5110-98-102-0139
Hand File

981020139
SQUARE,SECOND CUT: RNCC: 3 | RNVC: 1
300MM SQ 2ND CUT: RNCC: 3 | RNVC: 2
300MM SQ 2ND CUT: RNCC: 5 | RNVC: 9
FA176M STUBS: RNCC: 6 | RNVC: 9

14 Dec 1978

5110-17-001-7258
Els Heft

170017258
42: RNCC: 3 | RNVC: 2

17 Jun 1972

5110-12-384-1634
Diagonal Cutting Pliers

123841634
WM 22928: RNCC: 3 | RNVC: 2

28 Jan 2011

5110-99-923-4788
Firmer Chisel

999234788
M313: RNCC: 3 | RNVC: 1
M313 16MM: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-99-910-4830
Hand File

999104830
DEF1098: RNCC: 4 | RNVC: 1

25 Apr 1991

5110-15-184-7368
Forbici

151847368
4FTECN140: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-394-0659
Tube Cutter

123940659
TK-1: RNCC: 3 | RNVC: 2

4 Nov 2013

5110-25-102-8493

5110-25-102-3751

5110-25-102-3765
Hand File

5110-25-136-9953

5110-25-101-5759

5110-25-110-7293

5110-21-639-3976
Hand Operated Wire Rope Cutter

216393976
C: RNCC: 3 | RNVC: 2
C: RNCC: 3 | RNVC: 2
GGGC800: RNCC: 4 | RNVC: 1
PELWALCS: RNCC: 5 | RNVC: 2
504483: RNCC: 5 | RNVC: 9

30 Nov 1965

5110-15-136-2745
Tagliatubi A Catena

151362745
3610-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-22-613-3237
Hand File

226133237
412200X4,8: RNCC: 3 | RNVC: 2

16 May 2006

5110-15-165-4149
Chiave A Bussola

151654149
928A: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-209-8183
Tagliatubi Per Tubi

152098183
626-A: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-4051
Lame Di Ricambio Pe

151654051
53213: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-384-8107
Farrie Blade Knife

123848107
51.000.005: RNCC: 3 | RNVC: 2
51.000.005: RNCC: 5 | RNVC: 2

31 Mar 2011

5110-15-143-0919
Chiave Esagonale Pa

151430919
02707251: RNCC: 3 | RNVC: 2

13 Nov 1996

5110-15-208-8770
Cesoia Per Lattonie

152088770
4KCACNDX254: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-612-4569
Single Bow Cutting Punch

226124569
71506: RNCC: 3 | RNVC: 2

12 Jan 2006

5110-15-208-9334
Tronchese

152089334
2646N: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-193-2407
Sopporto Completo P

151932407
504177081: RNCC: 3 | RNVC: 2
(241)A4249504177081: RNCC: 5 | RNVC: 2

22 Apr 2010

5110-14-490-8834
Alesoir

144908834
4067 010 000 302: RNCC: 3 | RNVC: 2
F300 0T 000 5106: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-27-011-7711
Hand Reamer

270117711
10111KR5002: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-208-4606
Fustella

152084606
3FANGRSE51: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-639-4196
Hand File

216394196
39GP30: RNCC: 4 | RNVC: 1

1 Feb 1965

5110-14-227-9077

5110-33-155-9587
Firmer Chisel

331559587
119.150/1: RNCC: 3 | RNVC: 2

9 Jan 1991

5110-99-142-3659

5110-25-115-0760

5110-21-639-4415

5110-25-119-8125
Chisel Bar

5110-21-637-7577

5110-21-639-6435

5110-15-208-4522
Alesatore

152084522
3AARPERMDQ26: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-910-5091
Hand File

999105091
C00RDPATH4102: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-22-621-4622
Tube Cutter

226214622
41732: RNCC: 3 | RNVC: 2
5725630350: RNCC: 5 | RNVC: 2

18 Oct 2010

5110-14-574-3615
Brick Chisel

145743615
7106300201: RNCC: 3 | RNVC: 2

14 Jan 2013

5110-12-129-5509

5110-25-143-1020
Hand Reamer

5110-27-015-5601
Hand File

270155601
14001YP20839: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-27-011-6673
Hand File

270116673
09013KE1026: RNCC: 2 | RNVC: 1
60232001: RNCC: 2 | RNVC: 1
60232001: RNCC: 5 | RNVC: 2

18 Jun 2002

5110-15-159-3197
Electricians' Scissors

151593197
PN UAS 00025877: RNCC: 3 | RNVC: 2
5120F76012010: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-14-451-4112
Double Bow Cutting Punch

144514112
245.J2DIAM36: RNCC: 3 | RNVC: 2

19 Nov 1991

5110-27-011-7712
Hand Reamer

270117712
10111KR5004: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-310-4973
Poincon Decoupage

143104973
568-4-8: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-220-3776
Raspa Mezzo Tonda

152203776
10RMT8: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-230-8080
Tronchese A Taglio

152308080
511015E087299: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-22-304-7172

5110-25-112-6423

5110-25-103-9194

5110-25-102-3847
Hand File

5110-25-112-5936

5110-99-910-4999
Hand File

999104999
C00RDPATH4029: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9
1A3857: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-37-524-0735
Hand Wire Stripper

375240735
3500E-1: RNCC: 3 | RNVC: 2

9 Aug 2012

5110-25-116-5347
Hand File

251165347
187-5IN: RNCC: 3 | RNVC: 2
EXTRASLIMTAPER187-5IN: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-14-259-3853

5110-22-610-8935
Hand Optical Fiber Cleaving Tool

226108935
S323B: RNCC: 3 | RNVC: 2
S323B: RNCC: 5 | RNVC: 2

4 Jul 2005

5110-15-208-4890
Pialla

152084890
5PLECHDL42X235: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-244-0856

5110-17-124-3931
Hand Wire Stripper

171243931
1052834: RNCC: 3 | RNVC: 2

19 Jun 2012

5110-15-134-4571
Cesoia Tipo America

151344571
205002: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-33-206-0999
Hand Metal Stamping Die

332060999
0303532: RNCC: 3 | RNVC: 2

6 Aug 2007

5110-14-244-0797

5110-14-244-0682

5110-12-126-4803

5110-15-165-3708
Punteruoli A Punta

151653708
3448X100: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-201-1080
Electricians' Scissors

152011080
FORBICIELETTRICISTA: RNCC: 3 | RNVC: 2
(241)A1572FORBICIELETTRICISTA: RNCC: 5 | RNVC: 2

29 May 2006

5110-21-105-2148
Punch And Die Punch

211052148
2: RNCC: 3 | RNVC: 1
300080484: RNCC: 3 | RNVC: 2
1F55: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-99-254-0559
Pipe Cutter Roller

992540559
7100206: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-21-102-5442
Hand File

211025442
REF NOT ON FILE: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-004-9219
Chiave A Forchetta

150049219
A894M75MM: RNCC: 3 | RNVC: 2

9 Dec 2013

5110-98-104-3476
Swiv Deburring Tool

5110-15-141-1052
Serie Spaccadadi

151411052
289.19: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-99-614-8728
Taper Lapping Pins

996148728
H39087A1: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-14-244-0896

5110-98-106-8515
Jeweler's Saw

981068515
45328: RNCC: 3 | RNVC: 2
45328: RNCC: 5 | RNVC: 9

2 Dec 1981

5110-13-113-9514
Craftsman's Knife

131139514
19: RNCC: 3 | RNVC: 2

19 Mar 1991

5110-98-106-8511
Hand Commutator Slotting Tool

981068511
1370X1/4X.010: RNCC: 3 | RNVC: 2
1370X1/4X.010: RNCC: 5 | RNVC: 9

13 Jan 1982

5110-99-717-9765
Rabbet Plane

5110-23-111-1852
Electricians' Scissors

231111852
720525: RNCC: 3 | RNVC: 2

5 Mar 1991

5110-99-910-4850
Hand File

999104850
DEF1098: RNCC: 4 | RNVC: 1
H780: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-208-4822
Alesatore Cilin.Tip

152084822
3AAXFCFRDP5-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-213-6457
Sega Circolare A Ta

152136457
4518B: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-138-0791
Tronchese A Doppia

151380791
194004: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-208-4625
Alesatore Cilin.Man

152084625
3AAXFCFMEQ2-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-137-9532
Tronchese A Taglien

151379532
1092210: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-330-4457
Wire Stripper Blade

123304457
3418-15C: RNCC: 3 | RNVC: 2

16 Dec 1992

5110-14-463-9762
De Demont Outillage

144639762
854-500-303-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5110-22-618-0693
Tube Cutter

226180693
3145703: RNCC: 3 | RNVC: 2

13 Oct 2008

5110-14-232-4837

5110-14-244-0884

5110-14-282-8297

5110-66-159-8641
Scraping Knife

661598641
ZT1112: RNCC: 3 | RNVC: 2

6 Mar 2012

5110-21-892-1495
Miter Box

218921495
H114: RNCC: 3 | RNVC: 2

21 Jan 1983

5110-22-608-0202
Hand File

226080202
8737915936: RNCC: 3 | RNVC: 2

31 Aug 2004

5110-21-639-4288
Hand File

216394288
39GP30: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-15-209-2651
Sponderuola Per Lev

152092651
SPONDERUOLA: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-244-3715

5110-15-186-3647
Pala Con Impug.Larg

151863647
PPELD: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-639-4287
Hand File

216394287
39GP30: RNCC: 4 | RNVC: 1

19 Apr 1967

5110-25-139-2896
Glass Cutter

251392896
9801.12A: RNCC: 3 | RNVC: 2

14 Jan 1991

5110-14-275-8959

5110-15-137-9540
Cesoia Lama Stretta

151379540
1114030: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-383-8446
Craftsman's Knife

123838446
0731801C: RNCC: 3 | RNVC: 2

13 Dec 2010

5110-25-145-8877
Nested Saws

251458877
180014: RNCC: 3 | RNVC: 2
180014B55: RNCC: 3 | RNVC: 2

4 Dec 1995

5110-22-623-1998
Craftsman's Knife

226231998
21730204: RNCC: 3 | RNVC: 2

10 Nov 2011

5110-22-621-9343
Craftsman's Knife

6 Jan 2011

5110-25-113-2119

5110-25-105-7601

5110-98-201-0559
Hand File

982010559
3713300: RNCC: 3 | RNVC: 2

15 Apr 1987

5110-99-513-4218
Cassette Cutter

995134218
903203: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-15-235-9473
Tronchese Mm. 160

152359473
66025160: RNCC: 3 | RNVC: 2
511015E142386: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-208-4569
Alesatore Cilindric

152084569
3AARFCFMEQ5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-812-3757

5110-15-165-3750
Tagliabulloni Da Mm

151653750
3095760: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-534-0792
Diagonal Cutting Pliers

145340792
405.12C: RNCC: 3 | RNVC: 2
3148511751848: RNCC: 5 | RNVC: 2

12 Mar 2003

5110-33-155-1015

5110-33-126-9007

5110-15-165-3937
Raccordo Per Avvita

151653937
8923: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4279
Lima Piatta

151654279
1719AQ: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-373-3944
Compass Saw Blade

123733944
2608656021: RNCC: 3 | RNVC: 2

29 Oct 2007

5110-15-216-2762
Set Sonde Ricambio

152162762
RS0611098: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-159-5562
Knife Blade

661595562
AL98001-2: RNCC: 3 | RNVC: 2

19 Sep 2011

5110-21-639-4212
Hand File

216394212
39GP30: RNCC: 4 | RNVC: 1
309255: RNCC: 5 | RNVC: 9

25 May 1968

5110-15-208-4574
Alesatore

152084574
3AANFCFMEQ11-50: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-105-2018
Double Bow Cutting Punch

211052018
27: RNCC: 3 | RNVC: 1
149: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-15-216-1701
Filiera 12X1

152161701
SKF12X1: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-5394
Lama Sega Falegname

152085394
3NANLENTZ11P35X500: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-120-4878
Single Bit Axe

991204878
H6014: RNCC: 2 | RNVC: 2
A3: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-22-618-8116
Cable Stripper Blade

226188116
23000936: RNCC: 3 | RNVC: 2

5 Mar 2009

5110-15-212-7191
Lame Sega Alternati

152127191
T127D: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-230-5797
Cesoia Destrorsa

152305797
1123/250: RNCC: 3 | RNVC: 2
511015E126426: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-66-010-8562
Poppet Reamer Guide

660108562
1351375: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-99-924-2667
Hollo Cutting Punch

5110-66-061-3882
Hand File

660613882
6INXFNARR0WPILLAR: RNCC: 3 | RNVC: 1

10 Nov 1973

5110-15-165-3806
Lima Per Meccanica

151653806
256118: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-13-104-4791
Reamer Hand Pliers

5110-12-365-9364
Diagonal Cutting Pliers

123659364
170D: RNCC: 3 | RNVC: 2

21 Feb 2005

5110-23-111-1855
Hand File

231111855
720529: RNCC: 3 | RNVC: 2

5 Mar 1991

5110-15-230-5401
Lima Mezzatonda

152305401
1719C/M250: RNCC: 3 | RNVC: 2

19 Jul 2007

5110-66-016-5065
Rolling Tool Shoe

660165065
134200: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-220-6720
Trancia Hit 350

152206720
HIT350: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-33-203-3954
Diagonal Cutting Pliers

332033954
6.277: RNCC: 3 | RNVC: 2

1 Apr 2004

5110-99-446-8662

5110-99-454-1511

5110-99-551-1949
Safety Scissors

5110-99-664-2477

5110-15-137-9594
Tronchese Elettroni

151379594
1184002: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-126-1911
Rectangular Cutting Punch

121261911
148D13: RNCC: 3 | RNVC: 2

30 May 1969

5110-66-086-8310
Hand Reamer

660868310
652 3617: RNCC: 3 | RNVC: 2

15 Jan 1976

5110-66-120-4958
Hand Reamer

661204958
ADJUSTABLE REAMER: RNCC: 3 | RNVC: 1
653 0120: RNCC: 3 | RNVC: 2
MF: RNCC: 5 | RNVC: 9

9 Jun 1984

5110-99-840-1666
Metal Cutting Hand Saw

998401666
268: RNCC: 3 | RNVC: 2
268: RNCC: 5 | RNVC: 2
SANDVIK 268: RNCC: 5 | RNVC: 2
268: RNCC: 6 | RNVC: 9

10 Feb 1993

5110-14-513-3793
Electricians' Scissors

145133793
841.4: RNCC: 3 | RNVC: 2
0714 03 16: RNCC: 5 | RNVC: 2

17 Mar 1999

5110-14-490-0607
Diagonal Cutting Pliers

144900607
435.RC: RNCC: 3 | RNVC: 2
0176153: RNCC: 5 | RNVC: 2
3148511761533: RNCC: 5 | RNVC: 2

10 Sep 1997

5110-66-013-7579
Hand Reamer

660137579
HAND REAMER: RNCC: 3 | RNVC: 1
650 4673: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-208-4603
Alesatori Conici Mm

152084603
3AAWFPCNDN6-4X8-98: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-465-9914
Planing Iron

994659914
3B2641: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-15-219-7060
Lama Bosch Per Segh

152197060
234XCF: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-206-4521
Bit Lama Cacciavite

152064521
S0108400010: RNCC: 3 | RNVC: 2
(241)AFA97S0108400010: RNCC: 5 | RNVC: 2

12 Jun 2012

5110-14-540-8406
Glass Cutter

145408406
003902: RNCC: 3 | RNVC: 2

23 Apr 2004

5110-15-215-4356
Sega Da Ferro

152154356
15-205: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-123-2761
Cesoia Per Lamiera

151232761
205001: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-66-154-9062
Firmer Chisel

661549062
16-265: RNCC: 3 | RNVC: 2
0381 5001: RNCC: 5 | RNVC: 2

4 Oct 2006

5110-14-266-6996

5110-22-618-4029
Crosscut Hand Saw

226184029
6345485: RNCC: 3 | RNVC: 2

10 Dec 2008

5110-12-373-1462
Hand Hacksaw Blade

123731462
441155: RNCC: 3 | RNVC: 2
01.89.36.21: RNCC: 5 | RNVC: 2

2 Oct 2007

5110-15-221-7460
Segaccio

152217460
5110RN0401934: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-619-6955
Wire Stripper Blade Set

226196955
C4-0296: RNCC: 3 | RNVC: 2

8 Sep 2009

5110-12-374-6884
Hand Cold Chisel

123746884
100-6: RNCC: 3 | RNVC: 2
70010006: RNCC: 5 | RNVC: 2

6 Mar 2008

5110-15-208-3648
Alesatore Tipo Fran

152083648
3AAXFCFMDP4-7: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-889-5843
Knockout Punch And Die

218895843
730-2-1/8: RNCC: 3 | RNVC: 2

18 Jul 1982

5110-15-191-2046
Trapano Manuale A 2

151912046
MANUALE DA MM 13: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-98-205-4758
Hand Reamer

982054758
DFAMPD00207 H: RNCC: 2 | RNVC: 2

12 Oct 2000

5110-21-893-1119
Craftsmans Kn Blade

218931119
24: RNCC: 3 | RNVC: 1
1024: RNCC: 5 | RNVC: 1
0524L: RNCC: 5 | RNVC: 2
424: RNCC: 5 | RNVC: 2
XF424: RNCC: 5 | RNVC: 2
313769-9: RNCC: 5 | RNVC: 9
32989: RNCC: 6 | RNVC: 9

29 May 1983

5110-15-208-3826
Alesatore

152083826
3AARFCFRDP19-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-385-3355
Craftsman's Knife

123853355
51.000.047A: RNCC: 3 | RNVC: 2
51.000.047A: RNCC: 5 | RNVC: 2

24 May 2011

5110-21-807-1194
Pinking Shears

218071194
FL0RIAN: RNCC: 3 | RNVC: 2

1 Mar 1965

5110-12-126-2023

5110-15-123-5446
Giravite Intaglio

151235446
322211: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-99-875-3031
Hand Reamer

998753031
A05560DA: RNCC: 3 | RNVC: 2
A05560DAP: RNCC: 5 | RNVC: 2
1MEVDTL: RNCC: 6 | RNVC: 9

1 Apr 2003

5110-15-170-1508
Seghetto Completo

151701508
15M968350: RNCC: 3 | RNVC: 2

5 Nov 2002

5110-15-216-1599
Sega Da Falegname

152161599
SEGA: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-215-2642
Troncatore Oleo Mac

152152642
MAC980TTA: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-27-011-6655
Hand File

270116655
09013KE1086: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-910-9958
Hand Reamer

999109958
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16213: RNCC: 6 | RNVC: 9
10116: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-208-2680
Lima

152082680
3LMMC0T0D0N6P: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4713
Lima

152084713
3LPKPNAGD0N140: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-5018
Scalpello

152085018
3SANMRPTZ250X12: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-27-011-7745
Hand Reamer

270117745
10111KR5062: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-305-8294
Knockout Punch And Die

123058294
74331103: RNCC: 3 | RNVC: 9

19 Dec 1985

5110-98-107-3783
Hand Reamer

981073783
07984-2000000: RNCC: 3 | RNVC: 2
07984-2000000: RNCC: 5 | RNVC: 9

18 May 1983

5110-12-367-9842
Pocket Folding Multi-Tool

123679842
PRT-VIII: RNCC: 3 | RNVC: 2

15 Nov 2005

5110-12-368-6956
Hand Cable Stripper

123686956
30120: RNCC: 3 | RNVC: 2

7 Apr 2006

5110-12-371-0408
Reamer Blade Set

123710408
130.45.400: RNCC: 3 | RNVC: 2

30 Jan 2007

5110-14-371-9921

5110-12-123-7106
Adz Handle

121237106
18-600: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-208-8706
Alesatori Serie In

152088706
66-8614B4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-513-4399
Wire Stripper Frame

995134399
H35/5: RNCC: 3 | RNVC: 2
875/32/3: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-117-9789
Pocket Knife

171179789
5154-22CM: RNCC: 3 | RNVC: 2
228/495/1: RNCC: 5 | RNVC: 2

7 Oct 2005

5110-21-865-8290
Ratchet Bit Brace

218658290
26-1602: RNCC: 3 | RNVC: 2
1710: RNCC: 3 | RNVC: 2
0026-1602: RNCC: 5 | RNVC: 9

14 Apr 1972

5110-14-207-7591

5110-15-165-3991
Tagliadischi Per Ve

151653991
44991200: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-212-4106
Cesoia Angolatrice

152124106
45/90: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-169-5926
Prolunga In.

151695926
F72015532: RNCC: 3 | RNVC: 2

5 Nov 2002

5110-14-244-0650

5110-12-126-2947
Craftsman's Knife

121262947
120060: RNCC: 3 | RNVC: 2
62355: RNCC: 3 | RNVC: 2
844300: RNCC: 3 | RNVC: 2
8443: RNCC: 5 | RNVC: 2
2237: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-276-1679
Tollerance Plate

992761679
MC1278113: RNCC: 3 | RNVC: 2

17 May 2002

5110-21-890-3025
Brick Chisel

218903025
01 134 H7: RNCC: 3 | RNVC: 2

1 Aug 1982

5110-15-184-7333
Ferro Per Sponderuo

151847333
3IANSRSQ22: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-14-244-0661

5110-15-054-1383
Bucksaw

150541383
56-5-560-700: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-21-639-4266

5110-21-639-5649

5110-15-235-9474
Tronchese Mm.160

152359474
66185160: RNCC: 3 | RNVC: 2
511015E142387: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-27-011-7702
Hand Reamer

270117702
09013KR1004: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-209-0613
Cacciaspine In Acci

152090613
0669055: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-4034
Punta Per Tracciare

151654034
4ASHAR: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-3660
Lima Per Metalli Me

151653660
25613D8: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-476-5801
Pipe Cutter

994765801
32895: RNCC: 3 | RNVC: 2

19 Oct 2004

5110-14-274-7910
Scie A Montur Lame

142747910
E73-028-550: RNCC: 2 | RNVC: 2

1 Jan 1971

5110-66-014-5519
Craftsman's Knife

660145519
3542: RNCC: 3 | RNVC: 2
3036: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-12-386-2804
Craftsman's Knife

123862804
50.000.062: RNCC: 3 | RNVC: 2

22 Aug 2011

5110-21-866-8371
Pocket Knife

218668371
397: RNCC: 3 | RNVC: 1

16 Jun 1972

5110-15-230-5455
Hand Operated Cable Cutter

152305455
1132IN/230: RNCC: 3 | RNVC: 2

19 Jul 2007

5110-27-011-7681
Hand Reamer

270117681
09013KR1085: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-14-511-1385
Cutting Punch Insert

145111385
245A.T26: RNCC: 3 | RNVC: 2

2 Dec 1998

5110-14-438-5478
Diagonal Cutting Pliers

144385478
1190-P0PVC: RNCC: 3 | RNVC: 2

26 Mar 1990

5110-14-219-2144

5110-25-140-7288
Hand File

5110-14-530-8783
Tube Cutter

145308783
336.54: RNCC: 3 | RNVC: 2
3148511675809: RNCC: 5 | RNVC: 2

11 Jul 2002

5110-27-011-1258
Hand File

270111258
07002YE0212: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-216-4566
Lima Piatta Per Fer

152164566
SAURO256: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-013-5493
Hand File

660135493
914106: RNCC: 3 | RNVC: 2
4074: RNCC: 5 | RNVC: 1
TRIANGULARSAWFILE: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-12-312-0293
Hand Metal Cutting Punch And Die

123120293
1964-70: RNCC: 3 | RNVC: 2

11 Nov 1987

5110-15-220-5214
Scalpello

152205214
200-35: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-002-6546
Pliers

150026546
393: RNCC: 3 | RNVC: 2

17 Sep 2013

5110-14-451-4088
Double Bow Cutting Punch

144514088
245.J2DIAM16: RNCC: 3 | RNVC: 2

19 Nov 1991

5110-14-303-2726
Poignee Tamponnoir

143032726
4492: RNCC: 3 | RNVC: 9

1 Jan 1973

5110-15-193-0712
Portautensile Inter

151930712
9745G: RNCC: 3 | RNVC: 2
(241)AA0039745G: RNCC: 5 | RNVC: 2

12 Apr 2010

5110-22-609-1092
Wood Scraper

226091092
5930: RNCC: 3 | RNVC: 2

16 Dec 2004

5110-12-385-3417
Craftsman's Knife

123853417
51.000.048: RNCC: 3 | RNVC: 2
53.000.044: RNCC: 3 | RNVC: 2
51.000.048: RNCC: 5 | RNVC: 2
53.000.044: RNCC: 5 | RNVC: 2

24 May 2011

5110-99-120-5543
File Handle

991205543
H1319: RNCC: 2 | RNVC: 2
F1FA14413: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-208-6025
Scalpello

152086025
3SANFLSUG15: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-910-5306

5110-99-910-5335

5110-66-011-4834
Hand Reamer

660114834
606A04375: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-21-859-0377
Hand File

218590377
39GP53: RNCC: 4 | RNVC: 1

14 May 1970

5110-98-107-7126
Hand Reamer

981077126
PARALLEL23/64X2-1/2X5IN.: RNCC: 3 | RNVC: 2

8 Feb 1984

5110-15-210-7071
Scalpello Per Mecca

152107071
C3602/4-150: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-061-3889

5110-12-177-9629
Korrektions Fraeser

121779629
2473B35: RNCC: 3 | RNVC: 9

9 Mar 1979

5110-12-378-9665
Pliers

123789665
08852002: RNCC: 3 | RNVC: 2
A0885 20 02: RNCC: 5 | RNVC: 2
391243225310: RNCC: 6 | RNVC: 9

4 Jun 2009

5110-98-203-4326
Knockout Punch And Die

982034326
010G: RNCC: 3 | RNVC: 2

14 Nov 1989

5110-98-102-0116
Hand File

981020116
150MM SQ 2ND CUT: RNCC: 3 | RNVC: 2
150MM SQ 2ND CUT: RNCC: 5 | RNVC: 9
FA171G STUBS: RNCC: 6 | RNVC: 9

1 Jun 1990

5110-66-060-3307
Hand Rasp

660603307
506: RNCC: 3 | RNVC: 2

30 Sep 1973

5110-14-565-4451
Hand Reamer

145654451
885238: RNCC: 3 | RNVC: 2

19 Aug 2010

5110-13-118-7066
Countersink Rotodri

131187066
RD9000: RNCC: 3 | RNVC: 2

16 Jul 2003

5110-15-159-9426
Graffettatrice M77

151599426
M77: RNCC: 3 | RNVC: 2
(241)AE208M77: RNCC: 5 | RNVC: 2

15 Apr 2004

5110-66-013-2377
Hand Masonry Drill

660132377
2308: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-15-222-0305
Lima

152220305
HBF4SQ: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-114-4362
Coltello Lama Curva

151144362
C5752141: RNCC: 3 | RNVC: 2

11 Jun 1992

5110-15-210-7793
Confezione 10 Lame

152107793
115225: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-119-5134
File Holder

251195134
13252: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-27-018-7887
Hand File

270187887
09013KE1002: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-197-2563
Screw Thread Insert Breaker

151972563
PN UAS 00031557: RNCC: 3 | RNVC: 2
5130F76028467: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-12-177-7516
Fraeser

121777516
395363: RNCC: 3 | RNVC: 9
395C2: RNCC: 5 | RNVC: 9

16 Feb 1979

5110-14-244-0681

5110-15-191-8544
Giravite Wiha

151918544
WIHA-309-13X200: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-12-129-5493

5110-12-126-4806
Bucksaw Blade

121264806
NO PRIMARY REF 12-126-4806: RNCC: 3 | RNVC: 2
288G2-5: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-124-0582
Bordatrice

151240582
2433: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-340-7592

5110-99-139-3895
Firmer Chisel

991393895
M601: RNCC: 3 | RNVC: 1
M601 13MM: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-221-2248
Spellafibre A Caldo

152212248
7728481: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-910-0869
Hand Reamer

219100869
99390310: RNCC: 3 | RNVC: 2

11 Nov 1993

5110-15-208-4541
Alesatore

152084541
3AARPERMDQ14-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-3649
Alesatore Tipo Fran

152083649
3AAXFCFMDP4-8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-199-0738
Double Bow Cutting Punch

151990738
3703-4: RNCC: 3 | RNVC: 2
C3703-4: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-98-205-4713
Hand File

982054713
DFAMPD00175: RNCC: 2 | RNVC: 2

10 Oct 2000

5110-21-639-4149
Hand File

216394149
39GP30: RNCC: 4 | RNVC: 1

23 Sep 1966

5110-14-204-8158
Chisel And Gouge Handle

142048158
E73-202-123: RNCC: 2 | RNVC: 2

1 Jan 1963

5110-25-101-9335
Single Bow Cutting Punch

251019335
10MMDIA: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-51-000-7434
File Handle

510007434
A0714 61 613: RNCC: 3 | RNVC: 2
391349117309: RNCC: 6 | RNVC: 9
48035: RNCC: 6 | RNVC: 9

25 Jan 2010

5110-21-105-1195
Hand File

211051195
39GP53: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-14-271-6964

5110-99-910-5155
Patternmakers Gouge

999105155
BS1943: RNCC: 4 | RNVC: 1
FA14023: RNCC: 6 | RNVC: 9
9105155: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4988
Tension File

999104988
COORDPATH5067: RNCC: 2 | RNVC: 2

25 Apr 1991

5110-99-853-3385
Diagonal Cutting Pliers

998533385
HTRN NEW 1H 0095: RNCC: 2 | RNVC: 2
503AECP: RNCC: 3 | RNVC: 2
7293C0: RNCC: 3 | RNVC: 2
L7293C0: RNCC: 5 | RNVC: 2
503AECP: RNCC: 5 | RNVC: 2

10 Aug 1993

5110-12-179-0281
Hand File

121790281
DICK0FIL4-260MM: RNCC: 3 | RNVC: 9

30 May 1979

5110-99-466-1364

5110-15-199-0747
Double Bow Cutting Punch

151990747
3703-13: RNCC: 3 | RNVC: 2
C3703-13: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-12-358-1152
Hand File Set

123581152
209 S5K: RNCC: 3 | RNVC: 2

16 Sep 2002

5110-15-171-1353
Giratubi Rafra

151711353
A0137008: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-173-0852
Svasatore Wurth Mod

151730852
06501710: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-34-041-3076
Glass Cutter

340413076
1299104203: RNCC: 3 | RNVC: 2
1299104203: RNCC: 6 | RNVC: 9

28 Sep 2011

5110-21-895-4284
Tube Cutter

218954284
51101391: RNCC: 3 | RNVC: 2

6 Mar 1984

5110-17-701-3852
Craftsman's Knife

177013852
NO PRIMARY REF 17-701-3852: RNCC: 3 | RNVC: 2
DICK3538: RNCC: 5 | RNVC: 9

14 May 1970

5110-99-910-4938
Hand File

999104938
DEF1098: RNCC: 4 | RNVC: 1
9104938: RNCC: 6 | RNVC: 9
1A929: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9
FA13570: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-701-3764
Hand Metal Stamping Die Set

177013764
SLAGH00FDLETTERS: RNCC: 3 | RNVC: 1

16 May 1970

5110-14-321-0708

5110-15-165-3670
Legno Lar Scalpello

151653670
828014: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-33-207-3175
Metal Cutting Hand Saw

332073175
5585.01450: RNCC: 3 | RNVC: 2
1000.015: RNCC: 6 | RNVC: 9

2 Mar 2009

5110-14-264-4805

5110-14-275-8961

5110-21-639-4326
Hand File

216394326
39GP30: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-15-210-5747
Mini-Archetto

152105747
208: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-197-0438
Pliers

151970438
PN UAS 00006483: RNCC: 3 | RNVC: 2
5110F76006208: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-12-194-3007
Reamer Blade Set

121943007
KNIVE-WN50F-7: RNCC: 3 | RNVC: 2
HSS012013-7: RNCC: 5 | RNVC: 9

20 Oct 1982

Load More Results