What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 78 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 78of 112

5110-25-001-5937

5110-15-221-5200
Lama Al Widia Diam

152215200
LCL2M21001: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-175-1445

5110-14-300-3831

5110-66-019-7365
Hand Reamer

660197365
HAND REAMER: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-15-191-1917
Cesoia Ferro

151911917
610: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-22-619-1490
Hand Cable Stripper

226191490
316232: RNCC: 3 | RNVC: 2
23000295: RNCC: 3 | RNVC: 2

13 May 2009

5110-14-257-7575

5110-66-011-4827
Hand Reamer

660114827
606A01875: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-33-206-1004
Hand Metal Stamping Die Set

332061004
0303540: RNCC: 3 | RNVC: 2

6 Aug 2007

5110-21-639-5659
Hand Metal Cutting Punch And Die Set

216395659
7: RNCC: 3 | RNVC: 1
310070156: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-230-4033
Lima Tonda

152304033
2562/2/8: RNCC: 3 | RNVC: 2
511015E065336: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-208-4772
Alesatore

152084772
3AAWFCFRDP20: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-400-6876
Tube Decoupe Joint

144006876
DEC0UPE J0INT LISSE 46MM: RNCC: 3 | RNVC: 2

8 May 1985

5110-15-214-8615
Tagliatubi Per Plas

152148615
42MM: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-27-015-5603
Hand File

270155603
14001YP20819: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-15-165-4251
Ricambio Matrice E

151654251
10RN1: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-137-9835
Lama X Seghetto 150

151379835
1728001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-141-1947
Pialletto A Mano

151411947
1-12-628: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-165-4258
Seghetto A Mano

151654258
181389: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-22-609-1716
Hand Reamer

226091716
013700084150: RNCC: 3 | RNVC: 2

22 Dec 2004

5110-12-155-9063
Wood Scraper

121559063
NM117: RNCC: 3 | RNVC: 2
NM117: RNCC: 5 | RNVC: 9

30 May 1969

5110-25-103-8698
Circle Cutter

251038698
10T0200MM: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-220-2088
Giravite Taglio Ant

152202088
1224/BA: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-328-0399
Diagonal Cutting Pliers

123280399
2675PP: RNCC: 3 | RNVC: 2

1 Apr 1992

5110-15-125-7431
Tagliatubi Per Tubi

151257431
622B: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-98-104-8069
Hand Posthole Auger

981048069
NZCES 1223: RNCC: 6 | RNVC: 9

13 Feb 1974

5110-15-197-0435
Pliers

151970435
PN UAS 00006575: RNCC: 3 | RNVC: 2
5110F76023138: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-281-5421

5110-17-121-3236
Schaaf Beitel

171213236
MAG 383492: RNCC: 3 | RNVC: 2

4 Jun 2008

5110-15-188-5434
Hand Metal Cutting Shears

151885434
MK132: RNCC: 3 | RNVC: 2
(241)AF120MK132: RNCC: 5 | RNVC: 2

5 Oct 2009

5110-15-184-1873
Machete Tipo Jaguar

151841873
C0MM621006010060: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-143-2789
Cylinder Rid Reamer

151432789
ART.800: RNCC: 3 | RNVC: 2

10 Dec 1996

5110-21-805-5974
Craftsman's Knife

218055974
KN625: RNCC: 3 | RNVC: 2
99: RNCC: 5 | RNVC: 2

25 Jul 1966

5110-66-015-7858
Fastener Die

660157858
1030: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-214-1338
Forbici Per Elettri

152141338
2175: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-259-3875

5110-99-417-8741
Panel Saw

994178741
475000: RNCC: 3 | RNVC: 2

5 May 1998

5110-14-310-4969
Poincon Decoupage

143104969
568-4-7: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-216-9387
Tagliarame Grande 4

152169387
4-16: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-165-3935
Cacciaspina Tipo Lu

151653935
31L6: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-134-5406
Lima Abrasiva Arkas

151345406
7624GD: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-231-7908

5110-14-511-0310
Cutting Punch Insert

145110310
245A.T18: RNCC: 3 | RNVC: 2

25 Nov 1998

5110-25-105-7646

5110-15-208-4784
Alesatore

152084784
3AAWFCFRDP29: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-4751
Lima

152084751
3LPKPQAGDDN160: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-122-2495

5110-99-844-7500

5110-21-639-5621

5110-66-010-8529
Poppet Valve Reamer

5110-15-192-9886
Cassette 13Pz Chiav

151929886
9300098: RNCC: 3 | RNVC: 2
(241)AD7829300098: RNCC: 5 | RNVC: 2

31 Mar 2010

5110-21-639-4900
Firmer Chisel

216394900
720: RNCC: 3 | RNVC: 1
230: RNCC: 3 | RNVC: 1

29 Aug 1964

5110-99-156-3198
Valve Seat Cutter

991563198
641: RNCC: 3 | RNVC: 2
MS641: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-219-1073
Coltello Fatmax

152191073
420-5984: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-145-2724
Scissors

151452724
99220209: RNCC: 3 | RNVC: 2
(241)A451799220209: RNCC: 5 | RNVC: 2

23 Jun 1997

5110-99-252-8401
Deburring Too Blade

992528401
B60: RNCC: 3 | RNVC: 2
1C/8695: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-305-6442
Hand Reamer

123056442
16100-3X10: RNCC: 3 | RNVC: 9

28 Nov 1985

5110-22-603-9379
Knife Blade

226039379
11: RNCC: 3 | RNVC: 2

3 Jun 2003

5110-21-857-8465
Punch

218578465
701005-951: RNCC: 3 | RNVC: 2

12 Mar 1970

5110-15-234-6707
Tagliapiastrelle Pe

152346707
64837: RNCC: 3 | RNVC: 2
511015E132090: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-12-146-3653

5110-12-383-1209
Ceramic-Til Cutter

123831209
164: RNCC: 3 | RNVC: 2

15 Sep 2010

5110-21-851-3035
Hand Cable Stripper

218513035
SHEATHMASTER GL: RNCC: 3 | RNVC: 2
GL: RNCC: 5 | RNVC: 2
0: RNCC: 5 | RNVC: 9

6 Oct 1968

5110-15-165-4012
Sega Circolare Da M

151654012
4850G400: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-369-6677
Coupe-Papier Lame

143696677
0926-1: RNCC: 3 | RNVC: 2
2265: RNCC: 5 | RNVC: 9

17 Apr 1981

5110-15-208-2652
Alesatore

152082652
3AACPEFMFN44-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-192-9881
Chiavi Telescopiche

151929881
3950100: RNCC: 3 | RNVC: 2
(241)AD7823950100: RNCC: 5 | RNVC: 2

31 Mar 2010

5110-14-336-5405

5110-12-368-7617
Diagonal Cutting Pliers

123687617
72 01 180: RNCC: 3 | RNVC: 2
00.12.45.81: RNCC: 5 | RNVC: 2
4003773028482: RNCC: 5 | RNVC: 2

13 Apr 2006

5110-22-607-4988
Pocket Knife

226074988
83.1215.06.303: RNCC: 3 | RNVC: 2

24 Jun 2004

5110-14-232-2687

5110-66-149-8802
Hand Deburrin Blade

661498802
B10: RNCC: 3 | RNVC: 2
75011914: RNCC: 3 | RNVC: 2
02516656: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-98-206-0971
Hand File

982060971
DFAMPD04109 SQUARE: RNCC: 2 | RNVC: 2

19 Aug 2004

5110-25-103-8071
Hand Hacksaw Frame

251038071
8T012IN: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-14-338-3924
Diagonal Cutting Pliers

143383924
425: RNCC: 3 | RNVC: 2
3148511758502: RNCC: 5 | RNVC: 2
8034723D00: RNCC: 5 | RNVC: 2
0714 07 40: RNCC: 5 | RNVC: 2
0175850: RNCC: 5 | RNVC: 9

6 Nov 1976

5110-27-011-5038
Hand File

270115038
10121ME0079: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-27-011-5037
Hand File

270115037
10121ME0078: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-190-0019
Cacciavite Con Lama

151900019
660500/7: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-21-637-5477
Hand Reamer

216375477
B174-2: RNCC: 3 | RNVC: 1
149: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

6 Jun 1968

5110-15-216-8821
Hand Operated Cable Cutter

152168821
083N17: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-528-0620
Hand Optical Fiber Stripper

145280620
F780026000: RNCC: 3 | RNVC: 2

12 Dec 2001

5110-15-159-3196
Electricians' Scissors

151593196
PN UAS 00038982: RNCC: 3 | RNVC: 2
5120F76033259: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-12-140-1383

5110-22-609-4145
Hole Saw

226094145
540130024: RNCC: 3 | RNVC: 2

24 Jan 2005

5110-15-208-5386
Lama Sega A Mano Fa

152085386
3NANLECYZ09P10X700: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-102-3768

5110-25-102-3804

5110-22-301-3131

5110-98-201-1751
Knockout Punch And Die

982011751
ARC 25MM: RNCC: 3 | RNVC: 2

25 Jun 1987

5110-66-016-5061
Peening Tool

660165061
135000: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-99-500-6320
Reamer

5110-14-205-8242

5110-21-105-1207
Hand File

211051207
1F62430: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-14-244-0785

5110-15-218-2411
Lama Hm 100 Mm

152182411
DT1306: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-5017
Scalpello

152085017
3SANMRPTZ200X10: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-17-125-0568
Hand Operated Cable Cutter

171250568
TL0584: RNCC: 3 | RNVC: 2

11 Sep 2013

5110-14-264-4826

5110-25-105-8026
Craftsman's Knife

251058026
KS9: RNCC: 5 | RNVC: 2
SAMEKNIVEN: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-99-910-5892
Blacksmith's Chisel Set

999105892
H2314: RNCC: 2 | RNVC: 2
H2314: RNCC: 6 | RNVC: 9
1A437: RNCC: 6 | RNVC: 9
FA16845: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-160-1707
Tronchesine

151601707
F720132501: RNCC: 2 | RNVC: 2

6 Oct 2000

5110-99-423-8737

5110-14-321-0709

5110-15-208-5306
Lima

152085306
3LCNPQCND0N400: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-98-205-9642
Hand File

982059642
DFAMPD03221: RNCC: 2 | RNVC: 2

27 Nov 2003

5110-12-384-9881
Hand Hacksaw Frame

123849881
907.2100: RNCC: 3 | RNVC: 2

15 Apr 2011

5110-15-214-9665
Tagliacavo

152149665
2620-80: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-3784
Alesatore

152083784
3AAXFCFRDP6-6: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-222-0735
Punte Da Centro N-4

152220735
8600G4: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-137-9542
Cesoia A Taglio Dri

151379542
1126025: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-208-4785
Alesatore Cilindr.T

152084785
3AAWFCFRDP29-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-117-9836
Facing And P Cutter

221179836
ME26644: RNCC: 3 | RNVC: 2

14 Dec 1981

5110-25-100-4298

5110-22-302-9004

5110-22-302-8743

5110-15-236-6102
Sega Ad Arco Cm.80

152366102
511015E034327: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-12-343-9047
Diagonal Cutting Pliers

123439047
1219-225: RNCC: 3 | RNVC: 2
01219022521: RNCC: 5 | RNVC: 2

13 Aug 1997

5110-12-120-9456

5110-15-220-1416
Raspa Con Manico Da

152201416
3RFLMZCNBSM400: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-217-2886
Ricambio Per Cesoia

152172886
8032524: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-5317
Pettine Per Filetta

152085317
4PINDC4-5X0-75: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-23-111-1435
Pliers

231111435
300424: RNCC: 3 | RNVC: 2

29 Jan 1991

5110-98-206-8436
Hand File Set

982068436
4911234: RNCC: 3 | RNVC: 2

11 Apr 2008

5110-99-465-3187

5110-15-218-0935
Lima

152180935
HB4SQ: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-218-0963
Levacoppiglie

152180963
3ASA: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-401-8457
Lames Pince Coupant

144018457
79278398: RNCC: 3 | RNVC: 2

13 Jun 1985

5110-21-639-4000
Glass Cutter

216394000
478: RNCC: 3 | RNVC: 2
478: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-66-013-9784
Hand Metal Cutting Shears

660139784
E110C: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-66-013-5160
Firmer Gouge

660135160
M437: RNCC: 3 | RNVC: 1
163: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-14-321-0711

5110-15-192-9885
Cassette 25Pz Polig

151929885
9200951: RNCC: 3 | RNVC: 2
(241)AD7829200951: RNCC: 5 | RNVC: 2

31 Mar 2010

5110-15-175-9044
Forette Per Serratu

151759044
2446-250: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-210-1768
Sega Tagliacornici

152101768
1452503: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-389-0320
Hand Cold Chisel

123890320
106/125MM: RNCC: 3 | RNVC: 2

21 May 2012

5110-12-388-0985
Turning Chisel

123880985
1853.05: RNCC: 3 | RNVC: 2

23 Feb 2012

5110-66-019-7352
Hand Reamer

660197352
HAND REAMER: RNCC: 3 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-14-218-7167

5110-22-307-3019
Hand Wire Stripper

223073019
510AE: RNCC: 3 | RNVC: 2
EREM510AE: RNCC: 3 | RNVC: 2
EREM510AE: RNCC: 5 | RNVC: 2

11 Mar 1986

5110-15-192-9893
Pinze Amperometrich

151929893
17600050: RNCC: 3 | RNVC: 2
(241)AD78217600050: RNCC: 5 | RNVC: 2

31 Mar 2010

5110-99-888-8939
Brick And Mason Saw

998888939
5229: RNCC: 3 | RNVC: 2

2 Feb 1993

5110-66-013-7611
Hand Reamer

660137611
HAND REAMER: RNCC: 3 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-15-202-6266
Hand Cold Chisel Set

152026266
2642410: RNCC: 3 | RNVC: 2
(241)AA1362642410: RNCC: 5 | RNVC: 2

28 May 2007

5110-21-105-1166
Hand File

211051166
39GP30: RNCC: 4 | RNVC: 1
309260: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-17-109-0289
Sealing Surface Milling Cutter

171090289
0694925: RNCC: 3 | RNVC: 2

21 Jun 1995

5110-12-324-1281
Craftsman's Knife

123241281
8383901: RNCC: 3 | RNVC: 2

23 Jan 1991

5110-98-107-5969
Hand File

981075969
350MM,MILSAW,BASTARD,2 SQ EDGES: RNCC: 5 | RNVC: 9

4 Nov 1983

5110-99-942-0123
Hand Reamer

999420123
BS122PT2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
F1FA16306: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-942-0108
Hand Reamer

999420108
BS122PT2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
20MM PARALLEL HAND REAMER: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-101-2159
Diagonal Cutting Pliers

151012159
024: RNCC: 3 | RNVC: 2
(241)A1572024: RNCC: 5 | RNVC: 2

15 May 1987

5110-15-165-3726
Fresa Cilindrica Fr

151653726
C270200: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-186-0809
Morsetto Per Saldar

151860809
MORSETTO90: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-22-619-5511
Tube Cutter

226195511
2419515: RNCC: 3 | RNVC: 2

5 Aug 2009

5110-99-120-3686

5110-25-147-5018
Folding Multi-Tool

5110-15-137-4780
Per Metall Seghetto

151374780
2502G: RNCC: 3 | RNVC: 2
2502G: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-306-1728
Hand File

123061728
953.008.000: RNCC: 3 | RNVC: 9

3 Feb 1986

5110-15-136-0410
Tronchese Con Tagli

151360410
1797-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-99-910-9960
Hand Reamer

999109960
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16215: RNCC: 6 | RNVC: 9
10118: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-369-6676
Coupe-Papier Lame

143696676
0925-1: RNCC: 3 | RNVC: 2
2263: RNCC: 5 | RNVC: 9

17 Apr 1981

5110-37-555-9099
Screw Driver(+)

375559099
PA-SD-1: RNCC: 5 | RNVC: 1

22 Mar 2004

5110-15-123-6550
Cesoia Per Lamiera

151236550
2087/1: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-123-2842
Lima Triangolare Da

151232842
2603/1-6: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-27-014-9033
Single Bow Cutting Punch

270149033
5120ATFD0440: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-15-195-3065
Pocket Knife

151953065
1777T: RNCC: 3 | RNVC: 2

14 Mar 2011

5110-15-217-1126
Puntatrice

152171126
NSN5110DV7000736: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-613-6446
Spade Chisel

226136446
812354: RNCC: 3 | RNVC: 2

6 Jul 2006

5110-15-132-6965
Archetto Per Seghet

151326965
2650G: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-840-8152

5110-12-393-0257
Metal Cutting Hand Saw

123930257
325: RNCC: 3 | RNVC: 2

31 Jul 2013

5110-12-336-0885
Brick Chisel

123360885
6615.11: RNCC: 3 | RNVC: 2
6615110000: RNCC: 5 | RNVC: 2

20 Oct 1994

5110-14-295-6808

5110-21-805-3727
Hand Reamer

218053727
0L: RNCC: 3 | RNVC: 2

5 Feb 1964

5110-12-368-9810
Double Bow Cutting Punch

123689810
0100620: RNCC: 3 | RNVC: 2
00.09.47.74: RNCC: 5 | RNVC: 2

10 May 2006

5110-25-149-9474
Universal Saks Fisk

251499474
9951: RNCC: 3 | RNVC: 2

2 Jun 2003

5110-25-101-9373

5110-22-210-7398

5110-99-910-5087
Hand File

999105087
C00RDPATH4096: RNCC: 3 | RNVC: 2
FA13590: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-208-3823
Alesatore

152083823
3AARFCFRDP16-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-065-1463
Handle File Wood

150651463
2448-80: RNCC: 3 | RNVC: 2

1 Jun 1987

5110-15-208-8771
Tronchese In Acciai

152088771
3TANCNCNFRN150: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-236-7977
Sbavatore Tubo Inte

152367977
011006: RNCC: 3 | RNVC: 2
511015E157101: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-22-610-5076
Circle Cutter

226105076
4.328.903.926: RNCC: 3 | RNVC: 2

27 May 2005

5110-15-207-2276
Finger Grip Hand Saw

152072276
S.F.M: RNCC: 3 | RNVC: 2
(241)AJ720S.F.M: RNCC: 5 | RNVC: 2

25 Sep 2012

5110-14-496-7094
Ciseau

144967094
841-8A: RNCC: 3 | RNVC: 2
F300 0T 021 9430: RNCC: 6 | RNVC: 9

15 Oct 1997

5110-15-195-3874
Lama A Gancio Doppi

151953874
CUT4RC: RNCC: 3 | RNVC: 2
(241)A5964CUT4RC: RNCC: 5 | RNVC: 2

21 Mar 2011

5110-98-851-7358

5110-99-812-3700

5110-99-812-3680

5110-15-125-2173
Cesoia Per Lamiera

151252173
204004: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-187-1193
Pinza

151871193
014720110: RNCC: 3 | RNVC: 2
1472FS: RNCC: 3 | RNVC: 2
(241)A0873014720110: RNCC: 5 | RNVC: 2
(241)A08731472FS: RNCC: 5 | RNVC: 2

19 Feb 2009

5110-17-701-4854
Smooth Plane

177014854
3112-50: RNCC: 3 | RNVC: 2
STANLEY4C: RNCC: 3 | RNVC: 2

14 May 1970

5110-25-723-3464
Craftsman's Knife

257233464
DS20568: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-12-005-0365

5110-98-200-5767
Hand File

982005767
3604002: RNCC: 3 | RNVC: 2

26 Sep 1986

5110-99-910-5835
Ship Scraper

999105835
H2233: RNCC: 3 | RNVC: 2
H2233: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-244-0706

5110-14-343-5984
Jeu De Molettes

143435984
90007009: RNCC: 3 | RNVC: 2

16 Jun 1977

5110-14-244-0711

5110-15-188-3333
Scraper Blade

151883333
09870041: RNCC: 3 | RNVC: 2
17057: RNCC: 5 | RNVC: 2
987 E32: RNCC: 5 | RNVC: 2
391531113206: RNCC: 6 | RNVC: 9

2 Sep 2009

5110-14-201-7238

5110-99-137-6826

5110-15-165-3846
Lima Per Meccanica

151653846
256415: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-364-2543
Diagonal Cutting Pliers

123642543
66005160-TCS: RNCC: 3 | RNVC: 2

4 Sep 2004

5110-32-077-9520
Single Bit Ax

320779520
A312932: RNCC: 3 | RNVC: 2

22 Sep 2003

5110-15-230-4114
Tronchese A Taglien

152304114
1818/1-250: RNCC: 3 | RNVC: 2
511015E075466: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-14-552-8124
Diagonal Cutting Pliers

145528124
405.10E: RNCC: 3 | RNVC: 2
3148511751251: RNCC: 5 | RNVC: 2
405.10E: RNCC: 5 | RNVC: 2

5 Feb 2007

5110-27-019-2662
Hand File

270192662
10131ME1022: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-21-639-5243
Hand Diamond Point Chisel

216395243
39GP43: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-22-221-4695

5110-22-221-4765

5110-15-208-4614
Alesatore Cilindric

152084614
3AAEFCFMDQ13: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-98-200-5471
Hand Reamer

982005471
3/32: RNCC: 3 | RNVC: 2

21 Aug 1986

5110-14-325-4235

5110-34-037-6593
Hand Hacksaw Frame

340376593
22203294: RNCC: 5 | RNVC: 2

2 Oct 2009

5110-21-889-5768
Flexible Saw

218895768
WOODMANSMODEL: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

27 Jun 1982

5110-99-428-9642
Hand Reamer

994289642
BS122: RNCC: 4 | RNVC: 1
F1FA16334: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-22-113-7453

5110-66-010-8520
Poppet Valve Reamer

660108520
13745: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-27-014-8924
Hand Reamer

270148924
3455ATF16399: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-25-103-7840
Twist Drill

251037840
M0RAB0RREN: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-15-192-9867
Attrezzo Sbavatubi

151929867
3450001: RNCC: 3 | RNVC: 2
(241)AD7823450001: RNCC: 5 | RNVC: 2

31 Mar 2010

5110-98-103-0655
Hand File

981030655
150MM HALF-RD BASTARD: RNCC: 3 | RNVC: 2
150MM HALF-RD BASTARD: RNCC: 5 | RNVC: 9

18 Jun 1976

5110-14-244-0779

5110-15-214-7154
Cesoia Per Lamiera

152147154
MOD-PL4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-149-7080
Lame Fixe

151497080
EM05029: RNCC: 3 | RNVC: 2
LF3000SC: RNCC: 5 | RNVC: 2

7 May 1999

5110-25-131-0980
Hand Cable Stripper

5110-14-458-6720
Pliers

144586720
387.18VSE: RNCC: 3 | RNVC: 2
3148511725726: RNCC: 5 | RNVC: 2
H24144: RNCC: 5 | RNVC: 2
0715 01 82: RNCC: 5 | RNVC: 2
0172572: RNCC: 5 | RNVC: 9
387.18VSE: RNCC: 5 | RNVC: 9

29 Oct 1992

5110-16-001-6934
Hand File

160016934
286211212525: RNCC: 3 | RNVC: 2

11 Mar 2002

5110-14-264-4816

5110-15-232-1293
Custodia Segaccio

152321293
80611: RNCC: 3 | RNVC: 2
511015E157079: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-12-126-1296
Glass Cutter

121261296
DIN7209-A10: RNCC: 2 | RNVC: 2
A10DIN7209: RNCC: 5 | RNVC: 2
DIN7209A10: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-208-3831
Alesatore

152083831
3AAXFCFRDP22-7: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-213-5579
Seghetto Snap-On

152135579
HS151: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-382-8741
Diagonal Cutting Pliers

123828741
66036115-TCS: RNCC: 3 | RNVC: 2

18 Aug 2010

5110-99-465-4117

5110-99-407-7156
Pliers

994077156
HL000800: RNCC: 3 | RNVC: 2

3 May 2006

5110-17-123-8107
Ruimer

171238107
9C4053NSCMB5416: RNCC: 3 | RNVC: 2
9C4053: RNCC: 5 | RNVC: 2

13 Jul 2011

5110-15-208-2586
Scalpello

152082586
3SANFLSUM20: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-27-011-1261
Hand File

270111261
10121ME0087: RNCC: 2 | RNVC: 1
6Q386038: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-12-316-7904
Craftsman's Knife

123167904
26426.04: RNCC: 3 | RNVC: 2
07L135: RNCC: 5 | RNVC: 2
26426: RNCC: 5 | RNVC: 9
26426,00: RNCC: 5 | RNVC: 9
26426,04: RNCC: 5 | RNVC: 9

14 Feb 1989

5110-21-639-4802
Hand File

216394802
39GP53: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-33-156-4505
Hand Operated Cable Cutter

331564505
007.370: RNCC: 3 | RNVC: 2

18 Mar 1994

5110-14-239-5192

5110-17-701-5800
Hand File

177015800
12301203 NICHOLSON: RNCC: 3 | RNVC: 2
003637: RNCC: 3 | RNVC: 2

14 May 1970

5110-12-358-3928
Pipe Cutter

123583928
922910: RNCC: 3 | RNVC: 2

15 Oct 2002

5110-14-244-4279
Pliers

142444279
10-035: RNCC: 3 | RNVC: 2
0UTF2: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-12-391-8432
Hand- Entgrater

123918432
RDTA0-01-02: RNCC: 3 | RNVC: 2

11 Apr 2013

5110-14-281-4993
Bent Trimmers Shears

142814993
220: RNCC: 3 | RNVC: 2

1 Jan 1971

5110-15-214-6077
Cesoia Lamiera

152146077
R3-C: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-373-9572
Denudeur Crayon

143739572
AV17: RNCC: 3 | RNVC: 2

8 Dec 1981

5110-58-000-1216
Single Bit Ax

580001216
122180: RNCC: 3 | RNVC: 2

12 May 2009

5110-33-156-6048
Hand Metal Cutting Shears

331566048
909.036: RNCC: 3 | RNVC: 2

23 Feb 1994

5110-27-011-7730
Hand Reamer

270117730
10111KR5030: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-604-7386
Bolt Knockout Cap

5110-15-232-0839
Spatola Acciaio 60M

152320839
015: RNCC: 3 | RNVC: 2
511015E121809: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-17-116-3064
Glass Cutter

171163064
150.012.410: RNCC: 3 | RNVC: 2
HGC7: RNCC: 5 | RNVC: 2
150.012.410: RNCC: 5 | RNVC: 2

31 Dec 2003

5110-17-115-5383
Hand Reamer

171155383
86405: RNCC: 3 | RNVC: 2

14 Mar 2003

5110-66-061-3654
Single Bit Ax Handle

660613654
HANDLESINGLEBIT: RNCC: 3 | RNVC: 2

10 Nov 1973

5110-15-176-7992
Lima Con Manico Da

151767992
2600/3: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-98-107-7117
Hand Reamer

981077117
PARALLEL7/32X2X4IN.: RNCC: 3 | RNVC: 2

7 Feb 1984

5110-15-218-2278
Confezione Lame Alt

152182278
X22013: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-463-2005
Pliers

5110-15-137-5764
Tronchese A Taglio

151375764
7/1784: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-99-747-3653

5110-21-637-5963

5110-21-639-5690

5110-15-125-2931
Flexible Armored Cable Cutter And Crimper

151252931
083002: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-66-013-5499
Hand File

660135499
HALFR0UNDFILE: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-15-002-4641
Drill

150024641
34004 20 2362: RNCC: 3 | RNVC: 2

29 Aug 2013

5110-15-184-7364
Forbici

151847364
4FSACN300: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-147-2148
Accetta Con Manico

151472148
188600: RNCC: 3 | RNVC: 2

20 Oct 1997

5110-21-639-5225
Hand Half Round Nose Chisel

216395225
250: RNCC: 3 | RNVC: 1
3B: RNCC: 3 | RNVC: 1
3B: RNCC: 3 | RNVC: 1
C19: RNCC: 3 | RNVC: 2
MS17072-3: RNCC: 3 | RNVC: 2
39GP43: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-22-607-3748
Hand File

226073748
1-100-14-1-0: RNCC: 3 | RNVC: 2
8019150: RNCC: 3 | RNVC: 2

11 Jun 2004

5110-14-513-3795
Diagonal Cutting Pliers

145133795
406.MT: RNCC: 3 | RNVC: 2

17 Mar 1999

5110-66-013-5761
Hand Rasp

660135761
HALFRDW00D: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-15-145-8897
Punzone Marca Ubold

151458897
3644: RNCC: 3 | RNVC: 2

11 Jul 1997

5110-15-185-8291
Pinza Tagliatubi Go

151858291
PTG1: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-466-5538
Steel Stamp

994665538
1C5023: RNCC: 3 | RNVC: 2

18 Jan 1977

5110-15-192-9887
Pinze Regolabili Cr

151929887
10480024: RNCC: 3 | RNVC: 2
(241)AD78210480024: RNCC: 5 | RNVC: 2

31 Mar 2010

5110-99-593-2795
Hand Reamer Set

995932795
XP.44: RNCC: 3 | RNVC: 2

28 Nov 1997

5110-21-639-6331
Circular Plane

216396331
20: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-15-191-8669
Troncacavi

151918669
050-245: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-99-826-5419
Hand Reamer

998265419
GA5010: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-15-184-7372
Punta Da Tracciare

151847372
NSN511015R557548: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-27-007-4253
Hand File

270074253
100X13X3 NO:3: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-15-208-5357
Tenaglia

152085357
4TAGFLCNTA180: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-010-8528
Poppet Valve Reamer

5110-21-105-2490
Hand Metal Cutting Shears

211052490
1710: RNCC: 3 | RNVC: 2

4 Jun 1968

5110-21-639-5191
Hand Cold Chisel

216395191
C4: RNCC: 3 | RNVC: 2
39GP43: RNCC: 4 | RNVC: 1
C4: RNCC: 5 | RNVC: 2

12 Aug 1963

5110-27-011-5425
Hand Reamer

270115425
10121MR0002: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-27-014-9016
Single Bow Cutting Punch

270149016
5110ATFD0128: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-33-156-4496
Diagonal Cutting Pliers

331564496
005.480: RNCC: 3 | RNVC: 2

18 Mar 1994

5110-15-134-2745
Taglient Tronchese

151342745
1807-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-176-4389
Lama Per Sega Mm. 5

151764389
ART4754: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-192-8386
Scalpello Sds A Cuc

151928386
P16318: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-15-123-6340
Lima A Mazzo Piatta

151236340
2580-2: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-22-606-1798
Breast Drill

226061798
C3465.0: RNCC: 3 | RNVC: 2

20 Jan 2004

5110-27-000-7993
Hand Cape Chisel

270007993
5010 03 0018: RNCC: 3 | RNVC: 2

7 Jun 1991

5110-15-190-0171
Tronchese Frontali

151900171
KX4: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-215-5772
Tranciacavi Isolato

152155772
9517500: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-2735
Scalpello

152082735
3SANMMPPZ150X16: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-168-5185
Firmer Chisel

991685185
M313: RNCC: 3 | RNVC: 1
M313 6MM: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-37-508-2973
Hand Reamer

375082973
60758727: RNCC: 3 | RNVC: 2
60758727: RNCC: 5 | RNVC: 2

26 Nov 2001

5110-15-208-4618
Alesatore

152084618
3AAXFCFMDQ24: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-013-5475
Hand Rasp

660135475
HALFRDW00D: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-21-111-5081
Hand Bull Point Chisel

211115081
584: RNCC: 3 | RNVC: 1
584: RNCC: 3 | RNVC: 1
01377H7: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-165-4253
Squadra A Cappello

151654253
1666A150: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-562-6467
Bolt Cutter Jaws

145626467
990.LB0: RNCC: 3 | RNVC: 2
3148517495135: RNCC: 5 | RNVC: 2

10 Nov 2009

5110-15-213-7312
Scalpello Per Legno

152137312
016-539: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-98-203-9792

5110-99-469-6203
Hand Reamer

994696203
1G521: RNCC: 3 | RNVC: 2

18 Jan 1977

5110-21-888-3876
Hand Reamer

218883876
1683: RNCC: 3 | RNVC: 1
1683: RNCC: 5 | RNVC: 1

27 Feb 1982

5110-99-433-4736

5110-99-713-7067
Diagonal Cutting Pliers

997137067
PW77: RNCC: 3 | RNVC: 2
AK186: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-208-4158
Lima

152084158
3LCNQUCNBSN101-6: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4538
Alesatore

152084538
3AARPERMDQ15-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-039-2132
Valve Seat Cutter

660392132
144515: RNCC: 3 | RNVC: 2

23 Apr 1971

5110-21-866-3168
Single Bow Cutting Punch

218663168
500SIZE00A: RNCC: 3 | RNVC: 2

19 May 1972

5110-14-426-8245
Hand Operated Wire Rope Cutter

144268245
0219560: RNCC: 3 | RNVC: 2
997.P22: RNCC: 5 | RNVC: 2
997P22: RNCC: 5 | RNVC: 2
TID17031: RNCC: 5 | RNVC: 2
0715 06 01: RNCC: 5 | RNVC: 2

23 Sep 1988

5110-27-011-6652
Hand File

270116652
09013KE1073: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-98-205-6464
Hand File

982056464
DFAMPD00271 A: RNCC: 2 | RNVC: 2

27 Jun 2001

5110-15-172-6036
Seghetto Usag Mod.2

151726036
SEGHETTO USAG MOD.200 REGOLABILE: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-209-6536
Fustella

152096536
3702-5: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-132-7275
In P Lame A Gancio

151327275
2817KM: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-33-156-4500
Diagonal Cutting Pliers

331564500
4702.020: RNCC: 3 | RNVC: 2
62552: RNCC: 3 | RNVC: 2
006.275: RNCC: 3 | RNVC: 2

18 Mar 1994

5110-27-055-9680
Hand File

270559680
FLF 14: RNCC: 2 | RNVC: 1
ESAS FLF 14: RNCC: 2 | RNVC: 1

18 Jan 2012

5110-27-015-5533
Hand File

270155533
14001YP21611: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-99-863-5518
Hand Reamer

998635518
A10470AAR: RNCC: 3 | RNVC: 2
1MEVDTX: RNCC: 6 | RNVC: 9

1 Apr 2003

5110-15-165-4143
Serie Cacciaviti

151654143
1200S4: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-17-115-0184
Hand Wire Stripper

171150184
91.A1100: RNCC: 3 | RNVC: 2

1 Jul 2002

5110-14-570-9781
Doweling Jig

145709781
6501CEG100010: RNCC: 3 | RNVC: 2

9 Feb 2012

5110-27-014-9009
Single Bow Cutting Punch

270149009
5110ATFD0121: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-15-000-2069
Diagonal Cutting Pliers

150002069
723040 180: RNCC: 3 | RNVC: 2

8 Feb 2013

5110-15-185-6504
Lima Per Sega A Nas

151856504
D2586: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-885-2040
Hand File

218852040
916069: RNCC: 3 | RNVC: 2

2 Jun 1981

5110-99-545-5263
Tool Setting

5110-33-190-2478

5110-17-110-7385
Hand Ruimer

5110-21-637-7573

5110-99-465-3607

5110-66-013-5502

5110-66-085-0786
Hand File

660850786
12-60730: RNCC: 3 | RNVC: 2

25 Mar 1975

5110-14-272-3619

5110-15-188-3334
Scraper Blade

151883334
09870042: RNCC: 3 | RNVC: 2
987 E50: RNCC: 5 | RNVC: 2
17058: RNCC: 5 | RNVC: 2
391531113305: RNCC: 6 | RNVC: 9

2 Sep 2009

5110-98-205-4833
Hand Metal Cutting Shears

982054833
DFAMPD00204 175S: RNCC: 2 | RNVC: 2

18 Oct 2000

5110-25-102-3763

5110-25-102-3757

5110-25-102-3822

5110-33-003-6193
Knockout Punch And Die

330036193
33002: RNCC: 3 | RNVC: 2

25 May 1998

5110-15-143-5074
Serie Di 6 Lime Ad

151435074
991SE6: RNCC: 3 | RNVC: 2
991021: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-15-184-7054
Raspa

151847054
3RFLMZCNBSN355-6: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-230-4115
Cesoia Per Reggetta

152304115
2085/3: RNCC: 3 | RNVC: 2
511015E075467: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-175-6253
Lama X Seghetto Alt

151756253
265312: RNCC: 3 | RNVC: 2
265312: RNCC: 5 | RNVC: 9

14 Feb 2004

5110-15-213-3480
Punta Bit -Lama A T

152133480
SDM211B: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-116-3271
Brick Chisel

251163271
02784: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-27-006-6516
Hand File

270066516
E103208: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-14-532-1115
End Cutting Nippers

145321115
N673301GC131: RNCC: 3 | RNVC: 2

9 Oct 2002

5110-17-115-7056
Rectangular Cutting Punch

171157056
1370390: RNCC: 3 | RNVC: 2

22 May 2003

5110-14-490-8837
Alesoir

144908837
4067 010 000 305: RNCC: 3 | RNVC: 2
F300 0T 000 5109: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-14-552-8027
Tube Cutter Cutting Wheel

145528027
337.F5: RNCC: 3 | RNVC: 2
337.F5: RNCC: 5 | RNVC: 2
3148511675847: RNCC: 5 | RNVC: 2

2 Feb 2007

5110-15-208-5377
Sega

152085377
5NCNFE900: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-153-2345
Bolt Cutter

991532345
T918H: RNCC: 3 | RNVC: 2

9 Jul 2012

5110-27-019-4795
Hand File

270194795
10091KEGE0080: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-12-177-4820
Saegeblatt

121774820
51842: RNCC: 3 | RNVC: 9

1 Feb 1979

5110-15-209-6719
Chiave A Nastro Art

152096719
2518WOLFGR2: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-780-8801
Canister Cutter

997808801
C.E.A.67: RNCC: 3 | RNVC: 2

19 Mar 1990

5110-15-136-3106
Punzoni Acciaio Mm.

151363106
3681/1-3: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-188-3285
Diagonal Cutting Pliers

151883285
182054: RNCC: 3 | RNVC: 2
13196: RNCC: 5 | RNVC: 2
182 B 160: RNCC: 5 | RNVC: 2
391129155404: RNCC: 6 | RNVC: 9

2 Sep 2009

5110-15-173-0826
Lama A Zebra Bimeta

151730826
060330013: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-135-9400
Scalpello Con P

151359400
354A: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-12-314-5287
Bieger Und Schneide

123145287
TP9: RNCC: 3 | RNVC: 2

16 Jul 1988

5110-14-266-7043

5110-99-434-7355

5110-15-208-4885
Pialla Legno Lun.Mm

152084885
5PLE260X60X44V: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-384-8282
Farriers' Chisel

123848282
51.000.045: RNCC: 3 | RNVC: 2
53.000.041: RNCC: 3 | RNVC: 2
51.000.045: RNCC: 5 | RNVC: 2
53.000.041: RNCC: 5 | RNVC: 2

1 Apr 2011

5110-15-186-3662
Cesoia A Cricchetto

151863662
342A: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-21-637-4385
Adjustable Re Pilot

216374385
1D: RNCC: 3 | RNVC: 2
51101374: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-15-184-7353
Bedano Da Falegname

151847353
3QANFLM20: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-208-4151
Lima

152084151
3LCNMZCNMDN127: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-197-5371
Chiave A T

151975371
PN UAS 00029166: RNCC: 3 | RNVC: 2
5110F76026941: RNCC: 5 | RNVC: 9

8 Apr 2004

5110-14-264-6131
Hand Masonry Drill

142646131
1112-16: RNCC: 3 | RNVC: 2

1 Jan 1970

5110-22-210-1950
Mattock Head Ax

222101950
8905: RNCC: 3 | RNVC: 2
BRANDMANDSOEKSE: RNCC: 6 | RNVC: 9

29 Nov 1972

5110-66-060-8782
Hand Metal Cutting Shears

660608782
E114LH: RNCC: 3 | RNVC: 2
07284007: RNCC: 5 | RNVC: 2

12 Oct 1973

5110-27-011-7734
Hand Reamer

270117734
10111KR5041: RNCC: 2 | RNVC: 1
09013KR1062: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-27-040-1812
Torna Kalemi

270401812
16X16X110: RNCC: 2 | RNVC: 1

10 Jan 2008

5110-15-217-5350
Giratubi Beta 1174

152175350
EXRI7906401: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-808-7885
Thread Restorer File

218087885
TF1127A: RNCC: 3 | RNVC: 2
TR2T: RNCC: 3 | RNVC: 2
TF1127: RNCC: 5 | RNVC: 2
2249: RNCC: 5 | RNVC: 2
2666: RNCC: 5 | RNVC: 2

17 Dec 1970

5110-14-201-7236

5110-27-019-2980
Hand File

270192980
10131ME1042: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-14-554-4460
Screw Thread Insert Breaker

145544460
1735C08100: RNCC: 3 | RNVC: 2

9 Jul 2007

5110-15-002-5175
Coping Saw

150025175
E 1111 0000: RNCC: 3 | RNVC: 2
MR3131E11110000: RNCC: 5 | RNVC: 2

2 Sep 2013

5110-15-136-4000
Lame Ricambio Per A

151364000
145: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-98-205-8511
Hand Hacksaw Blade

982058511
DFAMPD03054 B: RNCC: 2 | RNVC: 2

7 Mar 2003

5110-15-165-4137
Cesioia A Cremaglie

151654137
18970: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-173-4743
Pulitore Morsetti U

151734743
6827153: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-209-6528
Archetto A Seghetto

152096528
1265-2: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4688
Alesatore Cilindr.L

152084688
3AANFCFMEQ9: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-237-6486
Cuoio Compasso

152376486
C/G/6: RNCC: 3 | RNVC: 2
511015E073898: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-27-011-5033
Hand File

270115033
10121ME0074: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-33-126-4160
End Cutting Nippers

331264160
4601.005: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-15-132-6969
Alesatore In Acciai

151326969
H1466G5: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-22-221-4229

5110-22-221-3639

5110-21-802-4580

5110-15-165-3893
Tronchesi Per Elett

151653893
7841125: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-160-1705
Forbici Elet.

151601705
F720061721: RNCC: 2 | RNVC: 2

6 Oct 2000

5110-99-541-4168
Hand Stencil Cutting Die Set

995414168
STAMPSSTEELLETTERSAT0Z5MMH1GH: RNCC: 3 | RNVC: 2
AS600837: RNCC: 5 | RNVC: 1

25 Apr 1991

5110-99-910-5341
Jack Plane

999105341
H1751: RNCC: 2 | RNVC: 2
H1751: RNCC: 6 | RNVC: 9
1B1723: RNCC: 6 | RNVC: 9
F1FA15630: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-7771
Saddlers Edge Shave

999107771
H2823: RNCC: 2 | RNVC: 2
FA18161: RNCC: 6 | RNVC: 9
1K218: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-215-5780
Chiave Ad Anello Ap

152155780
S0141080911: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-199-6264
Blade

991996264
10A: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-21-104-9535
Sheet Cutter Blade

211049535
BF708C2: RNCC: 3 | RNVC: 2
BF708C3: RNCC: 3 | RNVC: 2
BF708A2: RNCC: 5 | RNVC: 2
307915: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-15-214-8111
Portalame Con Esago

152148111
M7407HG5: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-8208
Cesoia

152088208
4KTSCCNDX300: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-176-4558
Coltelli Universali

151764558
5232GM: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-14-244-3689

5110-99-910-4847
Hand File

999104847
C00RDPATH777: RNCC: 2 | RNVC: 2
DEF1098: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT5: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-041-3483
Pinze Spelacavi

150413483
62529: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-125-1658
Forbici

151251658
209001: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-21-870-2702
Diagonal Cutting Pliers

218702702
285G: RNCC: 3 | RNVC: 2
P73D4: RNCC: 3 | RNVC: 2
41G: RNCC: 5 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

18 Feb 1975

5110-99-203-1834
Zip Gun Ripper

992031834
98768: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-14-414-6638
End Cutting Nippers

144146638
1187-18S: RNCC: 3 | RNVC: 2

23 Feb 1987

5110-22-609-3611
Hand Wire Stripper

226093611
1558 100: RNCC: 3 | RNVC: 2

18 Jan 2005

5110-99-127-9164
Hand Set Reamer

991279164
FA16150: RNCC: 2 | RNVC: 2
F1FA16150: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-023-0151

5110-21-899-4773
Pulling Bar

218994773
ZT2062 #6: RNCC: 3 | RNVC: 2
ZT2062-6: RNCC: 5 | RNVC: 2

6 Aug 1985

5110-27-015-8812
Firmer Chisel

270158812
99999-NIIN-DA0037475: RNCC: 2 | RNVC: 1

17 Dec 2002

5110-12-314-1027
Bohrsaege

123141027
44577003: RNCC: 3 | RNVC: 2
1902-2: RNCC: 3 | RNVC: 2
8398824: RNCC: 3 | RNVC: 2
101014: RNCC: 5 | RNVC: 2
151-2: RNCC: 5 | RNVC: 2
158-2: RNCC: 5 | RNVC: 2
4950201: RNCC: 5 | RNVC: 2
5958944: RNCC: 5 | RNVC: 2
595890: RNCC: 5 | RNVC: 2
90-2: RNCC: 5 | RNVC: 9

7 Jun 1988

5110-27-017-4119
Diagonal Cutting Pliers

270174119
3510 45 0110: RNCC: 2 | RNVC: 1
10013182-1: RNCC: 2 | RNVC: 1

20 Jun 2003

5110-21-639-5546
Tinner's Hollow Cutting Punch

216395546
101-1: RNCC: 3 | RNVC: 2
39GP44: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-15-216-4324
Tenaglia Knipex

152164324
1150-160: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-541-1728

5110-22-303-5646

5110-99-445-4651
Saw Sheath

5110-19-003-6437
Hand Wire Stripper

190036437
8098: RNCC: 3 | RNVC: 2

12 Feb 2010

5110-15-125-1645
Tronchese Isolante

151251645
188: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-66-013-7603
Hand Reamer

660137603
650 4986: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-27-010-6734
Hand File

270106734
99999-NIIN-DA0014260: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-138-8052
Scalpello Piatto Pe

151388052
14MU574C300: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-21-639-4345
Hand File

216394345
39GP30: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-15-230-5672
Hand Operated Wire Rope Cutter

152305672
1104/450: RNCC: 3 | RNVC: 2

19 Jul 2007

5110-12-127-7383
Single Bow Cutting Punch

121277383
DIN7200-B11: RNCC: 2 | RNVC: 2
B11DIN7200: RNCC: 5 | RNVC: 2
DIN7200B11: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-010-4639
Plumber's Saw Blade

270104639
07002YD0100: RNCC: 2 | RNVC: 1
DA0057099: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-21-848-2993
Short Pliers

218482993
CG71: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-98-202-8663
Ladies' Scissors

982028663
0261: RNCC: 3 | RNVC: 2

8 Feb 1989

5110-99-137-5678

5110-14-484-8704
Rigid Handle Machete

144848704
0-76700-00000-92: RNCC: 3 | RNVC: 2
SABRE ANTILLAIS NGI0-76700: RNCC: 5 | RNVC: 9

12 Dec 1996

5110-15-219-8761
Taglierino E Relati

152198761
TAGLIERINO-SET DI LAME: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-868-0539
Scraper

5110-14-550-6159
Metal Cutting Hand Saw

145506159
62: RNCC: 3 | RNVC: 2
ULTRA 62 JUNIOR: RNCC: 3 | RNVC: 2
3321670000303: RNCC: 3 | RNVC: 2
JUNIOR: RNCC: 5 | RNVC: 2
MONTURE 62: RNCC: 5 | RNVC: 2
02.13.79.39: RNCC: 5 | RNVC: 2

3 Jul 2006

5110-14-530-3357
Cutting Punch Insert

145303357
245A.T32: RNCC: 3 | RNVC: 2
3148511585900: RNCC: 5 | RNVC: 2

31 May 2002

5110-15-157-8099
Flooring Hatchet

151578099
(241)A3648RM0004220142: RNCC: 3 | RNVC: 2
RM0004220142: RNCC: 3 | RNVC: 2

26 Oct 2003

5110-99-252-3136
Hand Hacksaw Frame

992523136
15-210C: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-14-244-0694

5110-99-147-5714
Toolbox

991475714
MC1278160: RNCC: 3 | RNVC: 2

17 May 2002

5110-15-190-3661
Trivel. Elic. Lung.

151903661
3UAN0RQU26X450: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-13-119-7198
Bearing Scraper Set

131197198
67.SET.KWC2: RNCC: 3 | RNVC: 2
02.20.46.27: RNCC: 5 | RNVC: 2

18 Jan 2007

5110-27-014-8921
Hand Reamer

270148921
3455ATF16395: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-12-141-1703
Hand File

121411703
2132102: RNCC: 3 | RNVC: 2
2407-100-2: RNCC: 3 | RNVC: 2
2132-100-2: RNCC: 5 | RNVC: 2
E50X2DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-339-5385
Craftsman's Knife

123395385
80603090-4: RNCC: 3 | RNVC: 2

4 Dec 1995

5110-21-865-8256
Hand File

218658256
F1306-4C: RNCC: 3 | RNVC: 1

14 Apr 1972

5110-99-553-1845
Deck Scraper

995531845
NO PRIMARY REF 99-553-1845: RNCC: 3 | RNVC: 2
S-10G: RNCC: 5 | RNVC: 2
UWS4A1: RNCC: 6 | RNVC: 9

27 May 2004

5110-99-747-3675
Cutter Wheel

997473675
D12530-109: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-25-102-4121
Hand Reamer

251024121
15-16T01 1-16IN: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-208-4793
Lima

152084793
3LPKQUAGMDN160: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-27-011-7682
Hand Reamer

270117682
09013KR1076: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-155-6108
Diagonal Cutting Pliers

151556108
(241)A5682TRO.: RNCC: 3 | RNVC: 2
TRO.: RNCC: 3 | RNVC: 2

30 Apr 2002

5110-15-182-4241
Kit Cutter Con Brug

151824241
ART.DE096: RNCC: 3 | RNVC: 2
KIT57: RNCC: 3 | RNVC: 2

19 Dec 2008

5110-98-205-7843
Diagonal Cutting Pliers

982057843
DFAMPD02342: RNCC: 2 | RNVC: 2

28 Aug 2002

5110-21-105-2890

5110-14-312-9510
Hand Diamond Point Chisel

143129510
CI0AMPCU: RNCC: 3 | RNVC: 9

1 Jan 1974

5110-21-639-5946
Chisel And Gouge Handle

216395946
W605R: RNCC: 3 | RNVC: 2
5110-0752: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-99-401-2863
Pilot Pivot Reamer

994012863
NO PRIMARY REF 99-401-2863: RNCC: 3 | RNVC: 2
Z8105: RNCC: 5 | RNVC: 9
16C3678: RNCC: 6 | RNVC: 9

12 Jul 1979

5110-27-018-5160
Hand File

270185160
14001YP21628: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-27-042-9047
Maket Bicak

270429047
901-MB-30: RNCC: 2 | RNVC: 1
MAKET BICAGI, ALUMINYUM: RNCC: 2 | RNVC: 1

18 Sep 2008

5110-27-011-7701
Hand Reamer

270117701
09013KR1003: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-21-105-2133
Punch And Die Punch

211052133
2: RNCC: 3 | RNVC: 1
2-1/4: RNCC: 3 | RNVC: 1
300080250: RNCC: 3 | RNVC: 2
1F39: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-15-197-0441
Pliers

151970441
PN UAS 00013758: RNCC: 3 | RNVC: 2
5110F76025940: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-303-3865

5110-12-129-5496

5110-15-175-5220
Manico In Legno 310

151755220
C3432/7-400: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-17-032-1041
Hand Reamer

170321041
BS122-2-1964TAB5 11-32IN800HV: RNCC: 2 | RNVC: 2
ISO 236/1: RNCC: 4 | RNVC: 1
BS122: RNCC: 4 | RNVC: 1

17 Jun 1972

5110-22-303-5296

5110-66-151-9310
Craftsman's Knife

661519310
1490044: RNCC: 3 | RNVC: 2

4 Mar 2004

Load More Results