What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 76 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 76of 112

5110-15-214-9178
Forbice Mm.250

152149178
3695: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-216-9391
Fresa Perforatrice

152169391
00321: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-244-0674

5110-21-876-0188
Hand Metal Stamping Die Set

218760188
2593: RNCC: 3 | RNVC: 1
1567Y271: RNCC: 3 | RNVC: 2

5 Apr 1977

5110-12-132-1884
Hand Reamer

121321884
141062: RNCC: 3 | RNVC: 2
1350-1-2-1 1-2: RNCC: 5 | RNVC: 9
5008-1 1-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-37-520-7314
Hand Cable Stripper

375207314
P-951: RNCC: 3 | RNVC: 2

28 Jan 2011

5110-15-216-4030
Fustella Da Cm 3

152164030
FUSELLAQ3: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-870-2962
Hand File

218702962
39GP30TYPEA: RNCC: 4 | RNVC: 1
5110-0475: RNCC: 5 | RNVC: 9

19 Nov 1974

5110-66-149-8184
Jack Plane

661498184
NO PRIMARY REF 66-149-8184: RNCC: 3 | RNVC: 2
07200405: RNCC: 5 | RNVC: 2

8 Apr 2003

5110-99-370-8122
Hand Reamer

5110-15-218-0019
Alfabeto A Punzone

152180019
ART2880-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-3767
Serie Punzoni Abc

151653767
36831005: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-192-9593
Pliers

151929593
7704217: RNCC: 3 | RNVC: 2
(241)AD3517704217: RNCC: 5 | RNVC: 2

30 Mar 2010

5110-98-205-9639
Hand Metal Stamping Die Set

982059639
DFAMPD03218: RNCC: 2 | RNVC: 2

27 Nov 2003

5110-15-208-3793
Alesatore

152083793
3AAXFCFRDP7-7: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-122-2550
Hand Reamer

121222550
7: RNCC: 3 | RNVC: 2

30 May 1969

5110-17-046-2036
Diagonal Cutting Pliers

170462036
EREM125E: RNCC: 3 | RNVC: 9

15 Jan 1981

5110-15-123-2977
Scalpello Mm.25X175

151232977
14582571: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-385-5456
Couteau Taille Elec

143855456
7M280: RNCC: 3 | RNVC: 2

26 Jul 1983

5110-66-064-4872
Hand File

660644872
5SLIMTAPERSEC0NDCUT: RNCC: 3 | RNVC: 2

10 Jan 1974

5110-26-301-1998
Hand Valve Seat Rotary Tool

263011998
AI030010: RNCC: 3 | RNVC: 2

26 Jun 2013

5110-21-639-4858
Hand File

216394858
941588: RNCC: 3 | RNVC: 2
ZW32: RNCC: 3 | RNVC: 2
39GP53: RNCC: 4 | RNVC: 1
41567: RNCC: 5 | RNVC: 9
3W: RNCC: C | RNVC: 1

6 Jun 1968

5110-15-002-5206
Assortimento Insert

150025206
06920032: RNCC: 3 | RNVC: 2
MR3461692SP3: RNCC: 5 | RNVC: 2

2 Sep 2013

5110-12-180-4743
Hand File

121804743
DIN7262-C150-2: RNCC: 2 | RNVC: 2
1238150: RNCC: 3 | RNVC: 2
1238-150-2: RNCC: 3 | RNVC: 2
C150-2DIN7262: RNCC: 5 | RNVC: 9
DIN7262C150-2: RNCC: 5 | RNVC: 9

12 Sep 1979

5110-15-222-0334
Lima Piatta Paralle

152220334
1-100-08-3-3: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-432-8787

5110-99-432-8792

5110-21-809-3223

5110-14-399-1595
Diagonal Cutting Pliers

143991595
232-14-CP: RNCC: 3 | RNVC: 2
232-14CP: RNCC: 3 | RNVC: 2
3272670213616: RNCC: 5 | RNVC: 2

6 Mar 1985

5110-15-217-1654
Segaccio

152171654
147SCP: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-210-4575
Segaccio

152104575
EX5110RN0641645: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-706-0424
Linoleumsn Gutsstel

5110-15-124-9408
Punzoni In Acciaio

151249408
3689-4: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-138-0806
Cesoia A Doppia Lev

151380806
203202: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-137-5766
Tenaglie Mm160

151375766
7/1787: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-134-3928
Lima Per Meccanici

151343928
2562-1-6: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-262-8132
Tariere Torse A Vis

142628132
12-4-40: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-15-208-4851
Alesatore

152084851
3AAXFCFRDP24-9: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-209-6498
Lama Ric. X Coltell

152096498
AM53022000: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-386-1120
Tube Cutter

123861120
5.2005: RNCC: 3 | RNVC: 2

9 Aug 2011

5110-14-244-0759

5110-12-379-3998
Wire Stripper Blade

123793998
12 49 21: RNCC: 3 | RNVC: 2
4003773057581: RNCC: 5 | RNVC: 2

20 Jul 2009

5110-14-244-3718

5110-99-434-7350

5110-15-001-2780
Hand Operated Cable Cutter

150012780
2793SSA95E: RNCC: 3 | RNVC: 2

12 Jun 2013

5110-22-610-5018
Craftsman's Knife

226105018
4.326.209.024: RNCC: 3 | RNVC: 2

27 May 2005

5110-17-701-5294
Draadknip Tang

177015294
10-3615178-36: RNCC: 3 | RNVC: 2
10-3615178-36: RNCC: 5 | RNVC: 9

29 Nov 1970

5110-17-701-3836
Scraping Knife

177013836
NO PRIMARY REF 17-701-3836: RNCC: 3 | RNVC: 2
002943: RNCC: 5 | RNVC: 2
KOTTENHOFF 465: RNCC: 5 | RNVC: 2

14 May 1970

5110-41-000-7524
Hand File

410007524
5076981-40: RNCC: 3 | RNVC: 2

12 Aug 2008

5110-99-910-5731
Bow Saw

999105731
UKD1SPR0V2108: RNCC: 4 | RNVC: 1
FA16625: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-176-8731
Hand Reamer

121768731
11610050: RNCC: 3 | RNVC: 9
7590B2: RNCC: 3 | RNVC: 9
539A2: RNCC: 3 | RNVC: 9

20 Dec 1978

5110-21-639-4284
Hand File

216394284
39GP30: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-15-230-5334
Cesoia A Lame Largh

152305334
511015E062608: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-219-4652
Chiavi Combinate 6-

152194652
00142/S26: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-221-9142
Serie Segacci Per L

152219142
5445/2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-156-3223

5110-15-171-8216
Forbici Da Elettric

151718216
FORBICI DA ELETTRICISTA VALEX: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-22-613-2400
Cable Stripper Blade

226132400
734-860: RNCC: 3 | RNVC: 2

2 May 2006

5110-14-270-3959

5110-12-130-2779
Hand Hacksaw Frame

121302779
NO PRIMARY REF 12-130-2779: RNCC: 3 | RNVC: 2
102518: RNCC: 5 | RNVC: 9
703N: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-123-6405
Lima Fresatrice Con

151236405
2610/3-12: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-17-015-5934
Hand File

170155934
TVA5110-2-263-005-1.1.24: RNCC: 3 | RNVC: 2
TVA5110-2-263-005: RNCC: 5 | RNVC: 1
12500802: RNCC: 5 | RNVC: 2

17 Jun 1972

5110-15-212-7263
Sega A Tazza Con De

152127263
HM4308-43: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-98-102-3496

5110-22-621-2978
Tube Cutter

226212978
150.10A-20-3: RNCC: 3 | RNVC: 2
1474790: RNCC: 5 | RNVC: 2

13 Sep 2010

5110-14-310-4953
Poincon Decoupage

143104953
568-4-3: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-216-3967
5 Filiera Da 10X1

152163967
K300-M27: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-500-0348
Bolt Cutter

995000348
BC918: RNCC: 3 | RNVC: 2
B-3908: RNCC: 5 | RNVC: 2

4 Mar 1992

5110-21-868-0538
Hand Operated Wire Rope Cutter

218680538
W: RNCC: 3 | RNVC: 2

14 Jul 1972

5110-12-333-7471
Hand Wire Stripper

123337471
3419 A: RNCC: 3 | RNVC: 2
1812409: RNCC: 5 | RNVC: 2

31 Jan 1994

5110-15-216-2682
Sega A Tazza Hss Mm

152162682
HO238: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-305-8303
Knockout Punch And Die

123058303
18.521.1: RNCC: 3 | RNVC: 2
74331210: RNCC: 3 | RNVC: 9

19 Dec 1985

5110-21-105-0028
Punch And Die S Die

211050028
2: RNCC: 3 | RNVC: 1
310080141: RNCC: 3 | RNVC: 2
1F5: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-12-010-5204

5110-21-876-0370
Circle Cutter

218760370
11: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

6 Sep 1977

5110-66-153-9568
Hand Reamer

661539568
UCT050070: RNCC: 3 | RNVC: 2

3 Jan 2006

5110-12-311-3513
Hand Cable Stripper

123113513
4018064: RNCC: 3 | RNVC: 2
109.73: RNCC: 5 | RNVC: 9
10973: RNCC: 5 | RNVC: 9
18064: RNCC: 5 | RNVC: 9

21 Aug 1987

5110-14-244-0649

5110-27-007-4254
Hand File

270074254
100X13X3 NO:2: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-14-330-9395
Hand Metal Cutting Shears

143309395
884A: RNCC: 3 | RNVC: 2
0714 03 09: RNCC: 5 | RNVC: 2
0210281: RNCC: 5 | RNVC: 2
884: RNCC: 5 | RNVC: 2
91640385: RNCC: 5 | RNVC: 2
0210280: RNCC: 5 | RNVC: 9

2 Jul 1975

5110-15-191-7157
Portalame

151917157
04-22022: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-98-854-4495

5110-99-135-9990

5110-27-013-2144
Single Bow Cutting Punch

270132144
570-36: RNCC: 2 | RNVC: 1

15 May 2002

5110-14-202-1916
Revolving Head Cutting Punch

142021916
NO PRIMARY REF14-202-1916: RNCC: 3 | RNVC: 2
17: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-14-395-8909
Diagonal Cutting Pliers

143958909
0139960: RNCC: 3 | RNVC: 2
3272670230385: RNCC: 5 | RNVC: 2
171.18EL: RNCC: 5 | RNVC: 2
227-20: RNCC: 5 | RNVC: 2
171-18EL: RNCC: 5 | RNVC: 2
4273-19: RNCC: 5 | RNVC: 9

30 Oct 1984

5110-15-199-0759
Double Bow Cutting Punch

151990759
3703-25: RNCC: 3 | RNVC: 2
C3703-25: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-14-420-0776
Tube Cutter

144200776
330: RNCC: 3 | RNVC: 2

18 Nov 1987

5110-15-197-2540
Screw Thread Insert Breaker

151972540
PN UAS 00037778: RNCC: 3 | RNVC: 2
5120F76032405: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-17-700-9753
Woodworking Butt Chisel

177009753
1172.32: RNCC: 3 | RNVC: 2
3010: RNCC: 5 | RNVC: 9
3010 1 1-4: RNCC: 5 | RNVC: 9

15 May 1970

5110-15-052-4715
Gimlet

150524715
1364-5: RNCC: 3 | RNVC: 2

10 Apr 1974

5110-15-208-3809
Alesatore

152083809
3AAXFCFRDP17-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-264-9026

5110-15-214-9027
Pinza Per Fascette

152149027
505300: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-133-0414
Lima Tonda Con Mani

151330414
2602-3-8: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-208-9253
Raschietto Putti L.

152089253
2489: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-910-5173
Auger Handle

999105173
A3-9807-5: RNCC: 3 | RNVC: 2
A3-9807: RNCC: 5 | RNVC: 1
FA14331: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-428-5986
De Centrage Guide

144285986
4602PSE103-0003: RNCC: 3 | RNVC: 2

8 Dec 1988

5110-15-199-1070
Straight Trimmers Shears

151991070
2050-300: RNCC: 3 | RNVC: 2
B2050-300: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-17-042-7847
Hand File

170427847
12980500: RNCC: 3 | RNVC: 2

22 Jul 1973

5110-66-146-7934
Bolt Cutter

661467934
HITNBC0300: RNCC: 3 | RNVC: 2
05537206: RNCC: 5 | RNVC: 2
05537206: RNCC: 5 | RNVC: 2

9 Aug 2000

5110-43-000-0276
Hand Operated Wire Rope Cutter

430000276
30.91.320.00.00: RNCC: 3 | RNVC: 2

30 Jan 2004

5110-15-186-7291
Punta Spacca Ghiacc

151867291
CP12: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-17-115-3728
Pliers

171153728
3770H: RNCC: 3 | RNVC: 2

15 Jan 2003

5110-14-310-7665
Couteau Coupe-Cable

143107665
971C16: RNCC: 3 | RNVC: 2
97116: RNCC: 5 | RNVC: 2

1 Jan 1974

5110-12-190-8625
Hand Reamer

121908625
123520: RNCC: 3 | RNVC: 2
123 520: RNCC: 5 | RNVC: 9

17 Dec 1981

5110-15-209-7056
Spatola Acciaio Den

152097056
ART.1135: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-490-9433
Cisaille

144909433
4193 102 666 000: RNCC: 3 | RNVC: 2
F300 0T 000 6951: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-15-185-7345
Lama X Seghetto

151857345
D2726/0: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-66-150-2136
Hand Hacksaw Blade

661502136
NO PRIMARY REF 66-150-2136: RNCC: 3 | RNVC: 2
09407701: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-361-4486
Hand Reamer

123614486
59753A0000-01: RNCC: 3 | RNVC: 2

1 Oct 2003

5110-15-208-4756
Lima

152084756
3LPKTRAGMDN160: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-221-4736
Taglialamiera

152214736
EX5110RI7421514: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-531-8684
Metal Shipping And Storage Drum Cutter

145318684
943M41: RNCC: 3 | RNVC: 2
943M41: RNCC: 5 | RNVC: 2

24 Sep 2002

5110-15-143-3556
Pinze Per Anelli La

151433556
127-280: RNCC: 3 | RNVC: 2
ART-127: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-66-064-3880
Craftsman's Knife

660643880
NO PRIMARY REF 66-064-3880: RNCC: 3 | RNVC: 2

20 Jan 1974

5110-21-639-4903
Firmer Chisel

216394903
720: RNCC: 3 | RNVC: 1

29 Aug 1964

5110-15-165-4056
Forbice Tipo Per Uf

151654056
2165250: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-25-120-3280
Hand File

251203280
10SBF5110HVK2: RNCC: 2 | RNVC: 1
FS 5110-0649 POS 3: RNCC: 2 | RNVC: 2

1 Jan 1984

5110-21-849-7988
Hand Cold Chisel

218497988
39GP43: RNCC: 4 | RNVC: 1
5110-0145: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-12-126-1476
Hand Reamer

121261476
NO PRIMARY REF 12-126-1476: RNCC: 3 | RNVC: 2
6DIN206SSSPIRALGENUTET: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-176-4461
Sponderuola Stanley

151764461
076S: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-12-126-1471

5110-22-618-4532
Hand Cable Stripper

226184532
0-0525421-8: RNCC: 3 | RNVC: 2

5 Jan 2009

5110-15-123-9992
Lame Per Sega A Nas

151239992
4820G25: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-22-607-3747
Hand File

226073747
1-104-12-2-0: RNCC: 3 | RNVC: 2
8019266: RNCC: 3 | RNVC: 2

11 Jun 2004

5110-33-206-8729
Mattock Head Ax

332068729
1129-1: RNCC: 3 | RNVC: 2
8413093112901: RNCC: 5 | RNVC: 2

13 Aug 2008

5110-99-798-7739
De-Burring Tool

997987739
STD354/5: RNCC: 3 | RNVC: 2
3AP-95894: RNCC: 6 | RNVC: 9

5 Aug 2002

5110-99-910-5904
C Smiths Set Chisel

999105904
S40: RNCC: 3 | RNVC: 2
H2317: RNCC: 6 | RNVC: 9
1A2748: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-140-1398

5110-99-881-4484

5110-27-019-3096
Hand File

270193096
10131ME1028: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-25-138-3641
Hand O Cable Cutter

5110-15-143-4883
Ugnetto Nervato

151434883
352002: RNCC: 3 | RNVC: 2
352-150: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-21-903-3341
Jeweler's Broach Set

219033341
15.505: RNCC: 3 | RNVC: 2
15-505: RNCC: 5 | RNVC: 2
15.505: RNCC: 5 | RNVC: 2

25 Jun 1988

5110-15-213-6946
Attrezzo Multiuso

152136946
ZK610: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-6028
Lima

152086028
3LCNC0CNMDN254: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-135-0364
Hand File Set

251350364
505688130: RNCC: 5 | RNVC: 2

6 Apr 1987

5110-17-042-7825
Hand File

170427825
12300402: RNCC: 3 | RNVC: 2

22 Jul 1973

5110-15-214-8596
Lima Triangolare Sg

152148596
3LCNTRCNBSM200: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-8320
Cesoia

152088320
4KCAFRSX240: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-219-8571
Graffettatrice Chio

152198571
30135005: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-138-0689
Tronchese Per Elett

151380689
021001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-367-6449
Hand- Entgrater

123676449
TUB RA2060: RNCC: 3 | RNVC: 2

19 Sep 2005

5110-33-156-5970
Diagonal Cutting Pliers

331565970
8217.01100: RNCC: 3 | RNVC: 2
633.016: RNCC: 3 | RNVC: 2
710.010/V: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-14-397-4873
Outil De Denudage

143974873
73120020: RNCC: 3 | RNVC: 2

14 Dec 1984

5110-15-165-3948
Stampini In Zinco D

151653948
304240: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-171-9874
Lama Ober Mod.3.28.

151719874
LAMA OBER MOD.3.28.90.05: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-141-1953
Serie Scalpelli Per

151411953
5175: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-22-620-3216
Tube Cutter

226203216
01DGN4003C-63: RNCC: 3 | RNVC: 2

15 Feb 2010

5110-21-634-5700

5110-15-204-3399
Hand Metal Stamping Die Set

152043399
47478003: RNCC: 3 | RNVC: 2
(241)ACA6447478003: RNCC: 5 | RNVC: 2

25 Oct 2011

5110-27-018-5166
Hand File

270185166
14001YP21660: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-27-025-8083
Tel Kesme Mak Kilif

270258083
5120KK0001119: RNCC: 2 | RNVC: 1
5120275000560: RNCC: 2 | RNVC: 1

13 Apr 2005

5110-17-114-0265
Schaar

171140265
013-1197: RNCC: 3 | RNVC: 2

8 May 2001

5110-66-042-3609
Hand Reamer Set

660423609
30046: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
30046: RNCC: 5 | RNVC: 2
85-693-7840: RNCC: 6 | RNVC: 9

14 Jul 1971

5110-22-270-2187

5110-22-270-2177

5110-22-210-5180

5110-14-204-8157
Single Bit Ax Handle

142048157
NO PRIMARY REF14-204-8157: RNCC: 3 | RNVC: 2
ST9SMGB0I2-311: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-66-150-3779
Firmer Chisel

661503779
NO PRIMARY REF 66-150-3779: RNCC: 3 | RNVC: 2
07118801: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-22-305-9394
Hand Wire Stripper

223059394
MK2FC: RNCC: 3 | RNVC: 2
STRIPAX: RNCC: 3 | RNVC: 2

25 Apr 1980

5110-27-011-6664
Hand File

270116664
09013YE1251: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-22-617-9683
File Handle

226179683
4034077012: RNCC: 3 | RNVC: 2

23 Sep 2008

5110-14-244-0874

5110-21-637-5606
Hand Reamer

216375606
CRITCHLEYANGLEBLADE: RNCC: 3 | RNVC: 1
1F108350: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-99-432-8977

5110-15-111-8265
Cassettoattrezzi

151118265
032228/1: RNCC: 3 | RNVC: 2

1 Jul 1990

5110-15-236-6627
Taglialamiera A Lev

152366627
0714 03 20: RNCC: 3 | RNVC: 2
511015E061848: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-165-3683
Sgorbia Larga Con M

151653683
605920: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-98-108-3223
Bench Wire Stripper

5110-98-104-7593

5110-66-013-5517

5110-17-121-2270
Hand File

171212270
SWIX TAA100: RNCC: 3 | RNVC: 2

16 Apr 2008

5110-13-113-9905
Craftsman's Knife

131139905
10: RNCC: 3 | RNVC: 2

25 Jun 1991

5110-15-210-5780
Scalpello Ottagonal

152105780
20240: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-716-9879

5110-15-181-7813
Setaccio Iso 8Mm

151817813
15-D2515/J: RNCC: 3 | RNVC: 2

19 Dec 2008

5110-15-230-4238
Scalpello Per Legno

152304238
6050/2-4: RNCC: 3 | RNVC: 2
511015E094223: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-27-010-6591
Hand File

270106591
99999-NIIN-DA0037146: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-219-4649
Filiera Tonda Din 2

152194649
165T615-3/4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-074-6201
File Holder

150746201
260ART2627-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-15-182-4554
Kit Ligarex Pinza B

151824554
A630160: RNCC: 3 | RNVC: 2

19 Dec 2008

5110-15-165-4277
Scalpello Nervato C

151654277
0035014: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-98-205-6546
Hand File

982056546
DFAMPD00254 B: RNCC: 2 | RNVC: 2

6 Jul 2001

5110-21-886-6823
Miter Box And Saw

218866823
90267: RNCC: 3 | RNVC: 2

21 Sep 1981

5110-99-767-5478
Crosscut Hand Saw

997675478
5-15-281: RNCC: 3 | RNVC: 2

12 Feb 2008

5110-99-942-0029
Hand Reamer

999420029
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-886-6974
Hand Cold Chisel

218866974
C9: RNCC: 3 | RNVC: 2

10 Oct 1981

5110-99-428-9624

5110-99-428-9617

5110-99-412-6645

5110-21-876-0166
Hand Metal Stamping Die

218760166
1593: RNCC: 3 | RNVC: 1
1567T181: RNCC: 3 | RNVC: 2
1567Y181: RNCC: 5 | RNVC: 9

19 Apr 1977

5110-14-397-4869
Outil De Denudage

143974869
73115000: RNCC: 3 | RNVC: 2
73015153: RNCC: 5 | RNVC: 2
73015173: RNCC: 5 | RNVC: 2
91710798: RNCC: 5 | RNVC: 2
91710799: RNCC: 5 | RNVC: 2

14 Dec 1984

5110-21-809-1565
Hand File

218091565
903698: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-22-304-0194

5110-22-304-0256

5110-98-104-6245

5110-17-029-6914
Hand Reamer

170296914
K15,5-18: RNCC: 3 | RNVC: 2
K15,5-18: RNCC: 5 | RNVC: 9
K15-5-18: RNCC: 6 | RNVC: 9
K15-5T0T18: RNCC: 6 | RNVC: 9

15 May 1970

5110-15-213-6646
Coltello Da Sub

152136646
COLTELLOSUB: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-204-6970
Hand Reamer

992046970
PD137: RNCC: 3 | RNVC: 2
PD137/1: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-209-1073
Serie 4 Lime Triang

152091073
ABC2603: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-98-107-7179
Hand Reamer

981077179
PARALLEL1-3/8X6-1/2X13IN.: RNCC: 3 | RNVC: 2

13 Feb 1984

5110-99-425-2953
Enginee Scraper Set

994252953
NO PRIMARY REF 99-425-2953: RNCC: 3 | RNVC: 2
CSAS440SH2-6: RNCC: 5 | RNVC: 2
633504: RNCC: 6 | RNVC: 9

19 Mar 1990

5110-15-136-0599
Fresa Per Rettifica

151360599
2339-3-3-4: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-210-4949
Serie Fustelle In C

152104949
EX9900RP2706586: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-806-2715

5110-22-221-4215

5110-66-150-5749
Pocket Folding Multi-Tool

661505749
NO PRIMARY REF 66-150-5749: RNCC: 3 | RNVC: 2
04842321: RNCC: 5 | RNVC: 2

16 Apr 2003

5110-27-000-7994
Hand Cape Chisel

270007994
5010 03 0020: RNCC: 3 | RNVC: 2

7 Jun 1991

5110-27-056-2627
Diagonal Cutting Pliers

270562627
RC0245: RNCC: 5 | RNVC: 9
RCO0245: RNCC: 5 | RNVC: 9

6 Mar 2012

5110-15-220-4885
Giratubi Vbw 951 1

152204885
951-1 1/2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-150-3276
Diagonal Cutting Pliers

661503276
NO PRIMARY REF 66-150-3276: RNCC: 3 | RNVC: 2
01304514: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-17-118-2373
Diagonal Cutting Pliers

171182373
RX8152 BAHCO-LINDSTROM: RNCC: 3 | RNVC: 2

17 Jan 2006

5110-66-018-5661
Chisel And Gouge Handle

660185661
16-025: RNCC: 3 | RNVC: 2
101HANDLE: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-12-343-6509
Craftsman's Knife

123436509
07252.00: RNCC: 3 | RNVC: 2

10 Jul 1997

5110-14-319-2238

5110-14-244-0751

5110-12-391-9268
Craftsman's Knife

123919268
071566275: RNCC: 3 | RNVC: 2

18 Apr 2013

5110-15-188-9745
Scalpello Per Fughe

151889745
2000072579: RNCC: 3 | RNVC: 2
(241)AA1362000072579: RNCC: 5 | RNVC: 2

11 Jan 2010

5110-14-530-2059
Pliers

145302059
387.16VSE: RNCC: 3 | RNVC: 2

22 May 2002

5110-15-165-3976
Coltello Multiuso C

151653976
220002: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-135-6236

5110-21-893-1097
Craftsman's Knife

218931097
731241: RNCC: 3 | RNVC: 2

21 May 1983

5110-14-264-4811

5110-14-264-0002

5110-17-110-7356
Hand Reamer

171107356
P926-0,1780-0,1620: RNCC: 3 | RNVC: 2
P926-: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-15-191-7532
Serie Cacciaviti A

151917532
382: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-233-4599
Forbice Elettricist

152334599
686/A: RNCC: 3 | RNVC: 2

19 Jul 2007

5110-15-210-9310
Squadruccia Da 25 A

152109310
5230: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-191-0577
Diamante A Compasso

151910577
4499GA: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-27-011-3959
Hand File

270113959
99999-NIIN-DA0037158: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-25-105-3217
Craftsman's Knife

251053217
5110-25-06190NL: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-21-842-7955
Miter Box

218427955
200: RNCC: 3 | RNVC: 2
57-5612: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-005-9788
Steel Strapping Cutter

150059788
078102 723027: RNCC: 3 | RNVC: 2
(241)A0019078102 723027: RNCC: 5 | RNVC: 2

11 Dec 2013

5110-12-345-8916
Cable Stripper Blade

123458916
05L7790: RNCC: 3 | RNVC: 2

12 May 1998

5110-26-300-1950
Hand File

263001950
20100108: RNCC: 3 | RNVC: 2

6 Jun 2005

5110-14-264-9020

5110-27-011-6649
Hand File

270116649
09013KE1035: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-199-0744
Double Bow Cutting Punch

151990744
3703-10: RNCC: 3 | RNVC: 2
C3703-10: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-12-126-1288
Hand File

121261288
NO PRIMARY REF 12-126-1288: RNCC: 3 | RNVC: 2
F125X3DIN8336: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-889-5931
Hand File

218895931
940486: RNCC: 3 | RNVC: 2
39-GP-53: RNCC: 4 | RNVC: 1

29 Jul 1982

5110-15-232-1292
Tagliolo Metalli

152321292
80601: RNCC: 3 | RNVC: 2
511015E157078: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-21-885-2454
Hand File

218852454
HAND6INCHCUT3: RNCC: 3 | RNVC: 1

14 Jul 1981

5110-27-014-8920
Hand Reamer

270148920
3455ATF16394: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-15-189-7470
Coltello

151897470
2815FP: RNCC: 3 | RNVC: 2

26 Feb 2010

5110-15-208-5349
Tronchese

152085349
3TANFZGELIN140: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-101-5938
Hand Cold Chisel

251015938
LE310: RNCC: 3 | RNVC: 1

1 Jan 1984

5110-15-232-3579
Cesoia Per Lamiera

152323579
560/220: RNCC: 3 | RNVC: 2
511015E111884: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-165-4319
Archetto Per Seghet

151654319
ART2765: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-219-1127
Pinza Crimpatrice

152191127
294-6914: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-34-030-0582
Tinner's Hollow Cutting Punch

340300582
OREA 760: RNCC: 3 | RNVC: 2
OREA 760: RNCC: 6 | RNVC: 9

4 Jul 2003

5110-15-208-6026
Scalpello

152086026
3SANFLCNZ12: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-141-1693

5110-57-440-3985
Pliers

574403985
7814-0261 I N14.N7.X1 GOST 5547-: RNCC: 3 | RNVC: 2

7 Feb 2011

5110-17-115-7844
Mes Bladen

171157844
0-11-301: RNCC: 3 | RNVC: 2

12 Jun 2003

5110-14-428-5480
Equipe Support

144285480
4602PSE104: RNCC: 3 | RNVC: 2

8 Dec 1988

5110-14-421-6288
Support De Gravure

144216288
0437-720000: RNCC: 3 | RNVC: 2

20 Jan 1988

5110-15-187-2844
Woodcarving Gouge

151872844
2000057815: RNCC: 3 | RNVC: 2
(241)AA1362000057815: RNCC: 5 | RNVC: 2

10 Mar 2009

5110-66-049-4467
Rigid Handle Machete

660494467
ADE(M)430: RNCC: 3 | RNVC: 2

8 May 1972

5110-27-055-9676
Hand File

270559676
KNF 08: RNCC: 2 | RNVC: 1
ESAS KNF 08: RNCC: 2 | RNVC: 1

18 Jan 2012

5110-15-215-5327
Giravite Fresato

152155327
7017570: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-140-3177
Double Bow Cutting Punch

121403177
NO PRIMARY REF 12-140-3177: RNCC: 3 | RNVC: 2
1563-43: RNCC: 5 | RNVC: 9
2673-43: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-819-6365
Pipe Cutter

218196365
46IGUTI: RNCC: 3 | RNVC: 2

28 Jan 1965

5110-99-453-7401
Coning Hand Cutter

994537401
HW33834: RNCC: 3 | RNVC: 2
64DT48: RNCC: 6 | RNVC: 9

11 Jun 1979

5110-21-870-2428
Ice Auger

218702428
D0425-03: RNCC: 3 | RNVC: 2
0026-2105: RNCC: 5 | RNVC: 9

25 Jul 1974

5110-12-131-7396
Ratchet Drill

121317396
577D001-450: RNCC: 3 | RNVC: 2

30 May 1969

5110-14-483-0724
Hand Operated Wire Rope Cutter

144830724
996.8: RNCC: 3 | RNVC: 2
219510: RNCC: 5 | RNVC: 2
3148512195108: RNCC: 5 | RNVC: 2
996-8: RNCC: 5 | RNVC: 2

8 Aug 1996

5110-22-100-1142
Hand Cold Chisel

221001142
9245-2812-30: RNCC: 3 | RNVC: 2
9200 0140: RNCC: 5 | RNVC: 9

1 Jan 1963

5110-66-018-5662
Chisel And Gouge Handle

660185662
16-020: RNCC: 3 | RNVC: 2
131HANDLE: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-22-614-8459
Diagonal Cutting Pliers

226148459
2222E: RNCC: 3 | RNVC: 2

12 Feb 2007

5110-14-215-8030

5110-21-639-4793
Hand File

216394793
39GP53: RNCC: 4 | RNVC: 1

23 Jul 1969

5110-98-102-0138
Hand File

981020138
300MM RD 2ND CUT: RNCC: 3 | RNVC: 2
300MM RD 2ND CUT: RNCC: 5 | RNVC: 9
ROUND,12IN LG: RNCC: 6 | RNVC: 9
FA401G STUBS: RNCC: 6 | RNVC: 9

4 Oct 1979

5110-15-208-4609
Alesatore

152084609
3AAWFCFMDQ26: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-102-3473
Double Bow Cutting Punch

251023473
2SBF5110HVK1: RNCC: 2 | RNVC: 1
221-4180: RNCC: 5 | RNVC: 2
221 4180: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-14-428-5483
Fixation Support

144285483
4602PSE000-0002: RNCC: 3 | RNVC: 2

8 Dec 1988

5110-12-126-1804
Chisel And Gouge Handle

121261804
NO PRIMARY REF 12-126-1804: RNCC: 3 | RNVC: 2
89G: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-173-9343
Handbetaetig Griff

121739343
NO PRIMARY REF 12-173-9343: RNCC: 3 | RNVC: 2
4650C: RNCC: 5 | RNVC: 9

23 May 1978

5110-14-244-3697

5110-15-180-2317
Coping Saw

151802317
OC 1009115: RNCC: 3 | RNVC: 2

15 Feb 2008

5110-12-021-2598

5110-22-121-9936
Hand Bench Shears

221219936
PLADESAKS 2T: RNCC: 3 | RNVC: 2

15 Nov 1993

5110-25-139-2888
Hand Operated Cable Cutter

251392888
9801.24A: RNCC: 3 | RNVC: 2

14 Jan 1991

5110-66-138-3323
Hand Reamer Set

661383323
DA94097000: RNCC: 3 | RNVC: 2

5 Oct 1994

5110-21-104-9299
Hand Snow Saw

211049299
UNIT6-2-2: RNCC: 2 | RNVC: 2
308005: RNCC: 6 | RNVC: 9

4 Jun 1968

5110-99-788-5933
Hub Nut Spanner

997885933
E399: RNCC: 3 | RNVC: 2
0694852: RNCC: 5 | RNVC: 2
MCWX6651499A: RNCC: 5 | RNVC: 2
X6651499: RNCC: 5 | RNVC: 2
E399: RNCC: 5 | RNVC: 2
41028794: RNCC: 5 | RNVC: 2
694852: RNCC: 5 | RNVC: 9

25 Apr 1991

5110-21-105-0005
Pipe Cutter Cutting Wheel

211050005
GGGC771: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-99-910-5695
Hand Rasp

999105695
BS498: RNCC: 4 | RNVC: 1

25 Apr 1991

5110-66-150-3280
Diagonal Cutting Pliers

661503280
NO PRIMARY REF 66-150-3280: RNCC: 3 | RNVC: 2
07207408: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-056-3818
Rotella Per Tagliat

150563818
2412-41X19X19: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-567-3883
Doweling Jig

145673883
10165: RNCC: 3 | RNVC: 9

10 Mar 2011

5110-99-179-8323

5110-22-302-9053

5110-98-102-2142
Compass Saw

981022142
NO PRIMARY REF 98-102-2142: RNCC: 3 | RNVC: 2
G29: RNCC: 5 | RNVC: 2

6 Jun 1973

5110-14-451-4108
Double Bow Cutting Punch

144514108
245.J2DIAM30: RNCC: 3 | RNVC: 2

19 Nov 1991

5110-21-913-3486
Wire Cutter

219133486
10557977: RNCC: 3 | RNVC: 2

22 Sep 1996

5110-20-007-6784
Scraper Blade

200076784
13321: RNCC: 3 | RNVC: 2

28 May 2013

5110-14-573-0443
Coping Saw Blade

145730443
691-E10A: RNCC: 3 | RNVC: 2

6 Sep 2012

5110-99-811-2785
Hand Operated Wire Rope Cutter

998112785
995147: RNCC: 3 | RNVC: 2
97PK01661: RNCC: 6 | RNVC: 9

1 Dec 1997

5110-98-205-4720
Woodworking Butt Chisel

982054720
DFAMPD00167: RNCC: 2 | RNVC: 2

10 Oct 2000

5110-15-208-4630
Man Alesatore Fisso

152084630
3AAXFCFMEQ1-8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-37-555-9098
Screw Driver(+)

375559098
NSSA03: RNCC: 5 | RNVC: 1

22 Mar 2004

5110-99-246-6293
Gland Tool Handle

992466293
MC1270101: RNCC: 3 | RNVC: 2

17 May 2002

5110-15-136-6328
Contatti Lima

151366328
5-261: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-12-133-0466
Hand Belt Cutter

121330466
122: RNCC: 3 | RNVC: 2

30 May 1969

5110-66-013-5573
Hand File

660135573
916573: RNCC: 3 | RNVC: 2
WARDINGFILE: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-15-208-7680
Scalpello

152087680
3SANMMPPZ180X19: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-639-6050
Compass Saw

216396050
18: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-99-131-3924
Cradle Support

991313924
MC1278030: RNCC: 3 | RNVC: 2

17 May 2002

5110-17-029-5255
Craftsman's Knife

170295255
DESIGN 6INCH: RNCC: 3 | RNVC: 2
002944: RNCC: 5 | RNVC: 2
199: RNCC: 5 | RNVC: 2

16 May 1970

5110-12-127-4682
Craftsman's Knife

121274682
1976FKFZ750: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-208-4668
Fustella Per Guarni

152084668
3FANGRF034: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-287-8281
Tube Cutter

142878281
2102-3: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-15-199-0739
Double Bow Cutting Punch

151990739
3703-5: RNCC: 3 | RNVC: 2
C3703-5: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-208-5392
Lama Sega Falegname

152085392
3NANLENTZ06P30X600: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-23-112-3324
Currycomb

231123324
000589015300: RNCC: 3 | RNVC: 2

4 Jan 1994

5110-99-132-1204
Snow Knife Saw

5110-22-302-9060

5110-12-133-5834
Adz

121335834
241MITSTIEL: RNCC: 3 | RNVC: 2
3368-90MITSTIEL: RNCC: 3 | RNVC: 2
350-0950/91-0800: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-186-3835
Sturatore Manuale

151863835
WIRAX M 7,5: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-910-5002
Hand File

999105002
COORDPATH4032: RNCC: 2 | RNVC: 2
H20297: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9
1A3858: RNCC: 6 | RNVC: 9
FA13304: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-757-6154
Blade

997576154
BLADE FOR CUTTER PLASTIC AND RU-: RNCC: 3 | RNVC: 1
1B/6131: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-17-121-1107
Ontbramer Mes

171211107
N80 NOGA: RNCC: 3 | RNVC: 2

21 Feb 2008

5110-15-208-3783
Alesatore

152083783
3AAXFCFRDP6-4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-4566
Alesatore

152084566
3AARFCFMEQ13-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-859-0071
Punch And Die S Die

218590071
730R12: RNCC: 3 | RNVC: 2

16 Apr 1970

5110-15-123-6546
Pinze A Fustella

151236546
2006: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-208-8450
Alesatore

152088450
3AAWFCFRDP6-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-32-084-1612
Scraping Knife

320841612
2001609637: RNCC: 3 | RNVC: 2

20 Apr 2010

5110-99-910-9983
Hand Reamer

999109983
BS122PT2: RNCC: 4 | RNVC: 1
F1FA16254: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-354-3334
Craftsman's Knife

123543334
9854180: RNCC: 3 | RNVC: 2
4003773026563: RNCC: 5 | RNVC: 2
9854: RNCC: 5 | RNVC: 9

3 Jul 2001

5110-99-608-9011
Slave Shim

996089011
MC1276071: RNCC: 3 | RNVC: 2

16 May 2002

5110-12-195-2700
Hand Operated Cable Cutter

121952700
9527600: RNCC: 3 | RNVC: 2
53338020: RNCC: 3 | RNVC: 2
53338 020: RNCC: 5 | RNVC: 2
4003773021797: RNCC: 5 | RNVC: 2

1 Feb 1983

5110-21-883-1880
Hand File

218831880
39GP30: RNCC: 4 | RNVC: 1

24 Feb 1981

5110-12-388-0981
Turning Chisel

123880981
1805.16: RNCC: 3 | RNVC: 2

23 Feb 2012

5110-99-562-5393
Seal Installation

995625393
MC1276151: RNCC: 3 | RNVC: 2

16 May 2002

5110-15-190-3553
Alesatore

151903553
4448: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-208-5035
Scalpello

152085035
3SANFLCNM8: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-150-5218
Knife Blade

661505218
NO PRIMARY REF 66-150-5218: RNCC: 3 | RNVC: 2
07645905: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-66-150-5219
Knife Blade

661505219
NO PRIMARY REF 66-150-5219: RNCC: 3 | RNVC: 2
08884914: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-17-006-1878
File Handle

170061878
TS5110-0505-140MM: RNCC: 3 | RNVC: 2
TS5110-0505: RNCC: 5 | RNVC: 1

17 Jun 1972

5110-21-893-0954
Hand Cable Stripper

218930954
KMS 109.23: RNCC: 5 | RNVC: 2
AD-7006: RNCC: 5 | RNVC: 9
AD7006: RNCC: 5 | RNVC: 9
078093: RNCC: 6 | RNVC: 9

17 Apr 1983

5110-98-205-4851
Hand Hacksaw Blade

982054851
DFAMPD00200 A: RNCC: 2 | RNVC: 2

24 Oct 2000

5110-15-210-3676
Lama Per Seghetto A

152103676
A5044: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-190-8808
Coppia Ganasce Di R

151908808
202B: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-12-161-8008
Schab- Und Schneidw

121618008
3527: RNCC: 3 | RNVC: 2
147451: RNCC: 5 | RNVC: 2

30 May 1969

5110-12-126-1982

5110-14-257-7568

5110-25-148-9600
Hand Optical Fiber Cleaving Tool

251489600
FCP-22: RNCC: 3 | RNVC: 2

21 Mar 2001

5110-25-119-7807
Steel Strapping Cutter

251197807
FS 5110-0395: RNCC: 2 | RNVC: 2
CU30: RNCC: 3 | RNVC: 2
1290T: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-99-220-3987
Glass Cutter

992203987
S28-655: RNCC: 3 | RNVC: 2
H6HF11066: RNCC: 6 | RNVC: 9
63C1907: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-203-6801
Diagonal Cutting Pliers

152036801
188058: RNCC: 3 | RNVC: 2

24 Jun 2011

5110-17-110-9583
Pocket Knife

171109583
1 52 53: RNCC: 3 | RNVC: 2

17 Jun 1997

5110-15-159-9340
Diagonal Cutting Pliers

151599340
TRLAB: RNCC: 3 | RNVC: 2
(241)AE208TRLAB: RNCC: 5 | RNVC: 2

15 Apr 2004

5110-21-889-5871
Potters Needle

218895871
PNH: RNCC: 3 | RNVC: 2

18 Jul 1982

5110-14-319-2237

5110-15-190-3718
Pettine

151903718
4PESGA1-4-3-8X19: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-21-639-5184
Hand Cold Chisel

216395184
495: RNCC: 3 | RNVC: 1
C2: RNCC: 3 | RNVC: 2
MS17070-3: RNCC: 3 | RNVC: 2
39GP43: RNCC: 4 | RNVC: 1
C2: RNCC: 5 | RNVC: 2
402: RNCC: 5 | RNVC: 2

1 Feb 1965

5110-14-485-8282
Diagonal Cutting Pliers

144858282
427.E: RNCC: 3 | RNVC: 2
NF ISO 9654: RNCC: 4 | RNVC: 1
3148511759141: RNCC: 5 | RNVC: 2
194-2630: RNCC: 5 | RNVC: 2
0175914: RNCC: 5 | RNVC: 9
FACO427.E: RNCC: 5 | RNVC: 9

17 Feb 1997

5110-14-262-8127
Tariere Torse A Vis

142628127
12-4-30: RNCC: 2 | RNVC: 2

1 Jan 1970

5110-21-639-6170
Saw Handle

216396170
66: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-215-9528
Ricambio Lama Mobil

152159528
148122: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-045-4388
Hand Operated Wire Rope Cutter

660454388
0533000000401: RNCC: 3 | RNVC: 2
W8WAA0401: RNCC: 6 | RNVC: 9

14 Feb 1973

5110-12-120-5145

5110-14-366-7141

5110-21-865-0383
Pipe Cutter

218650383
6B: RNCC: 3 | RNVC: 2

17 Mar 1972

5110-15-124-6752
Lima Triangolare Ta

151246752
2564-3DS: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-66-154-3018
Hand Rasp

661543018
917903: RNCC: 3 | RNVC: 2
07094909: RNCC: 5 | RNVC: 2

19 Apr 2006

5110-15-221-9296
Scalpello Per Legno

152219296
1031-6: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-428-7272

5110-98-201-9448
Ship Scraper

982019448
NO PRIMARY REF 98-201-9448: RNCC: 3 | RNVC: 2
951-1936: RNCC: 3 | RNVC: 2
103/86: RNCC: 5 | RNVC: 2

29 Mar 1988

5110-27-010-6718
Hand File

270106718
99999-NIIN-DA0037122: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-27-014-8946
Hand Reamer

270148946
3455ATF16451: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-27-011-5020
Hand File

270115020
10121ME0023: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-14-294-6644
Hand Masonry Drill Holder

142946644
2403: RNCC: 3 | RNVC: 2
14TB: RNCC: 3 | RNVC: 2

1 Jan 1973

5110-27-014-9000
Single Bow Cutting Punch

270149000
5110ATFD0112: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-22-221-4593
Hand Cold Chisel

222214593
8IN,I-PROFIL 26MM: RNCC: 3 | RNVC: 2

8 Jan 1973

5110-15-220-5304
Pinza X Capicorda B

152205304
PINZAXCAPICORDA: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-701-4876
Hand Reamer

177014876
9-5H7DIN206SS: RNCC: 2 | RNVC: 1
586-9-5: RNCC: 3 | RNVC: 2
DIN206: RNCC: 4 | RNVC: 1

13 Nov 1972

5110-98-200-5773
Hand File

982005773
3704006: RNCC: 3 | RNVC: 2

26 Sep 1986

5110-15-184-7326
Ferro

151847326
3IANSRSQ10: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-211-6745
Seghetto Alternativ

152116745
923: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-031-5383

5110-15-165-3715
Lima Mezza Tonda Co

151653715
260124: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-859-0386
Hand File

218590386
39GP53: RNCC: 4 | RNVC: 1

14 May 1970

5110-21-809-3202
Block Plane

218093202
33: RNCC: 3 | RNVC: 2

20 Mar 1964

5110-14-300-8872

5110-99-428-9627

5110-99-206-1397
Ru Removal Tool Kit

5110-99-120-0448

5110-15-208-5395
Lama Raschiare Fale

152085395
3ZANFLTVZ70X140: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-218-2847
Spazzola Acciaio Ta

152182847
T150MA14: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-16-001-0984
Metal Cutting Hand Saw

160010984
876500: RNCC: 3 | RNVC: 2
876500: RNCC: 5 | RNVC: 9

10 Sep 2001

5110-27-000-8064
Single Bow Cutting Punch

270008064
5700 24 0025: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-15-214-6935
Inpugnatura

152146935
EXRI3109412: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-130-0495
Rectangular Cutting Punch

121300495
148D10: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-165-4233
Spatola Semiflessib

151654233
0710060: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-33-156-6050
Hand Metal Cutting Shears

331566050
911.016: RNCC: 3 | RNVC: 2

23 Feb 1994

5110-15-213-9864
Portacomparatore Pe

152139864
185000095A01: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-244-0700

5110-14-351-7948

5110-33-103-9423
Straight Trimmers Shears

331039423
900.528: RNCC: 3 | RNVC: 2

23 Jun 1995

5110-14-541-0196
Tube Cutter

145410196
175003: RNCC: 3 | RNVC: 2
PIP1840: RNCC: 5 | RNVC: 2
171003: RNCC: 5 | RNVC: 9

5 May 2004

5110-27-011-6666
Hand File

270116666
09013YE1253: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-33-200-2170
Hand Bull Point Chisel

332002170
28130208: RNCC: 3 | RNVC: 2

6 Nov 2001

5110-12-140-9218
Di Fraesvorrichtung

121409218
124440: RNCC: 3 | RNVC: 2
4650: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-203-1310

5110-99-203-5689

5110-98-203-4323
Knockout Punch And Die

982034323
010B: RNCC: 3 | RNVC: 2

14 Nov 1989

5110-21-883-1731
Riffler

218831731
STYLE8: RNCC: 3 | RNVC: 1
941078: RNCC: 5 | RNVC: 2

18 Feb 1981

5110-66-015-5167
Hand Reamer

660155167
TAPER SOCKET REAMER: RNCC: 3 | RNVC: 1
652 4515: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-175-6205
Segaccio

151756205
172P-330: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-14-576-3298
Rip Hand Saw

145763298
0695 931: RNCC: 3 | RNVC: 2

12 Jun 2013

5110-15-165-4285
Scalpello Per Legno

151654285
6056318: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-220-6922
Seghetto 18'

152206922
SEGHETTO18': RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-392-0802
Entgrater Klinge

123920802
071442024: RNCC: 3 | RNVC: 2

2 May 2013

5110-15-192-4985
Chiave Combinata 35

151924985
420035: RNCC: 3 | RNVC: 2
(241)AJ236420035: RNCC: 5 | RNVC: 2

22 Mar 2010

5110-15-185-2263
Spaccadati Usag 490

151852263
USAG490: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-136-0337
File Holder

151360337
2422G: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-230-8079
Lama Per Pneumatici

152308079
924L: RNCC: 3 | RNVC: 2

19 Jul 2007

5110-99-428-7619

5110-99-345-7275
Hand Operated Wire Rope Cutter

993457275
T01651: RNCC: 3 | RNVC: 2

17 Sep 2007

5110-21-816-6401
Dimpling Die

218166401
ZT2963-1/4-28: RNCC: 3 | RNVC: 2
ZT2963-1-4-28: RNCC: 5 | RNVC: 2

28 Aug 1964

5110-99-477-5243
Preforming Tool

994775243
554B: RNCC: 3 | RNVC: 2
554B: RNCC: 5 | RNVC: 2

11 Apr 2006

5110-19-005-1512
Pipe Cutter

190051512
44036/050: RNCC: 3 | RNVC: 2

24 Jun 2013

5110-15-176-5238
Cutter Autobloccant

151765238
383-0602: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-66-149-9393
Craftsman's Knife

661499393
NO PRIMARY REF 66-149-9393: RNCC: 3 | RNVC: 2
07193606: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-27-024-5019
Hand Metal Cutting Shears

270245019
04021704611: RNCC: 2 | RNVC: 1

5 Nov 2004

5110-14-244-0657

5110-21-849-8240
Hand File

218498240
39GP53: RNCC: 4 | RNVC: 1
5110-0694: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-14-426-2416
Screw Thread Insert Breaker

144262416
01586030000: RNCC: 3 | RNVC: 2
1735C03050: RNCC: 5 | RNVC: 2

9 Aug 1988

5110-33-204-8268
Diagonal Cutting Pliers

332048268
62343: RNCC: 3 | RNVC: 2
62315: RNCC: 6 | RNVC: 9

8 Feb 2006

5110-15-128-2611
Archetto Per Seghet

151282611
2762: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-295-6814

5110-14-540-7897
End Cutting Nippers

145407897
PARERGE15: RNCC: 3 | RNVC: 2

23 Apr 2004

5110-12-137-0694
Adz Handle

121370694
6779-800: RNCC: 3 | RNVC: 2

30 May 1969

5110-99-830-8269
Screw Holder

5110-17-701-5672
Hand File

177015672
3614: RNCC: 3 | RNVC: 2

14 May 1970

5110-15-217-7574
Taglia Bordo

152177574
TAGLIABORDO: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-123-9985
Shave Hook Scraper

121239985
9985: RNCC: 3 | RNVC: 2
1106: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-105-3200
Edge Cutting Trimming Tool

211053200
126: RNCC: 3 | RNVC: 1
311262: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-21-639-5221
Hand Half Round Nose Chisel

216395221
3B: RNCC: 3 | RNVC: 1
3B: RNCC: 3 | RNVC: 1
645: RNCC: 3 | RNVC: 1
CG645: RNCC: 3 | RNVC: 1
39GP43: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-15-138-1214
Scalpello Piatto Mm

151381214
351111: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-99-942-0251

5110-99-942-0272

5110-12-358-0680
Hand Metal Cutting Shears

123580680
7130342: RNCC: 3 | RNVC: 2
713 03 42: RNCC: 5 | RNVC: 2

9 Sep 2002

5110-99-910-4287
Hand Masonry Drill

999104287
TL45REVD: RNCC: 4 | RNVC: 1

25 Apr 1991

5110-15-174-9591
Tronchese Per Elett

151749591
2101G-140: RNCC: 3 | RNVC: 2

17 Oct 2003

5110-22-221-4772
Diagonal Cut Pliers

222214772
KNIPEX 7006-180: RNCC: 3 | RNVC: 2
TANG: RNCC: 5 | RNVC: 9
76-0885-6: RNCC: 6 | RNVC: 9

31 Jul 1973

5110-12-381-2844
Straight Trimmers Shears

123812844
72175: RNCC: 3 | RNVC: 2

28 Jan 2010

5110-14-563-3457
Knife Blade

145633457
RD-AC-1023: RNCC: 3 | RNVC: 2
10317436: RNCC: 6 | RNVC: 9

28 Jan 2010

5110-12-121-6844
Hand Metal Cutting Shears

121216844
DIN6438-200: RNCC: 2 | RNVC: 2
201-200: RNCC: 3 | RNVC: 9
200DIN6438: RNCC: 5 | RNVC: 2
5730010-200RECHTS: RNCC: 5 | RNVC: 9
5730014-200RECHTS: RNCC: 5 | RNVC: 9
5730016-200: RNCC: 5 | RNVC: 9
5730017-200: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-172-2228

5110-33-158-6404
End Cutting Nippers

331586404
4710.014: RNCC: 3 | RNVC: 2

15 Feb 1994

5110-33-156-6065
Hand Metal Cutting Shears

331566065
917.018: RNCC: 3 | RNVC: 2

23 Feb 1994

5110-14-204-8443

5110-21-639-6359
Wood Scraper

216396359
82: RNCC: 3 | RNVC: 2

25 May 1968

5110-12-331-7060
Cutting Punch Insert

123317060
53831004: RNCC: 3 | RNVC: 2

9 Jun 1993

5110-15-220-4657
Mazzetta Muratore

152204657
1250: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-614-2810
Firmer Chisel

226142810
1031-18: RNCC: 3 | RNVC: 2
504440018: RNCC: 5 | RNVC: 2

17 Oct 2006

5110-14-420-2465
Ciseau Contre-Fils

144202465
490577: RNCC: 3 | RNVC: 9

25 Nov 1987

5110-15-165-3804
Lima Per Meccanica

151653804
256114: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-172-9090
Universal File

5110-66-149-7479
Hand File

661497479
NO PRIMARY REF 66-149-7479: RNCC: 3 | RNVC: 2
07075106: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-22-608-7977
Hand Wire Stripper

226087977
45-265: RNCC: 3 | RNVC: 2

20 Nov 2004

5110-14-445-8071
Lot D'outillage

144458071
10061797: RNCC: 3 | RNVC: 2

26 Feb 1991

5110-99-204-2130

5110-98-205-4920
Knife Blade

982054920
DFAMPD00215: RNCC: 2 | RNVC: 2

14 Nov 2000

5110-14-490-8862
Alesoir

144908862
4067 010 001 941: RNCC: 3 | RNVC: 2
F300 0T 000 5134: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-17-042-7826
Hand File

170427826
12500402: RNCC: 3 | RNVC: 2

22 Jul 1973

5110-66-150-2991
Hand Cold Chisel Set

661502991
NO PRIMARY REF 66-150-2991: RNCC: 3 | RNVC: 2
03517710: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-214-7993
Scalpello Per Elett

152147993
3650: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-27-000-7987
Hand Cape Chisel

270007987
5010 03 0006: RNCC: 3 | RNVC: 2

7 Jun 1991

5110-15-215-5333
Seghetto Con Lama

152155333
70184000: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4783
Alesatore

152084783
3AAWFCFRDP27-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-37-555-9101
Screw Drivers

375559101
Q95012280: RNCC: 3 | RNVC: 2
29622464-6: RNCC: 5 | RNVC: 9

22 Mar 2004

5110-13-113-9908
Craftsman's Knife

131139908
13: RNCC: 3 | RNVC: 2

25 Jun 1991

5110-15-208-3647
Alesatore

152083647
3AAXFCFRDP4-6: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-567-8456
Line Cutter

145678456
1266180007: RNCC: 3 | RNVC: 2
CO070052: RNCC: 5 | RNVC: 2

15 Apr 2011

5110-14-244-0848

5110-66-013-7717
Hand Reamer

660137717
TAPER SOCKET REAMER: RNCC: 3 | RNVC: 1
652 4622: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-99-942-0211

Load More Results