What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 75 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 75of 112

5110-15-212-3171
Lama A Nastro Da 49

152123171
LAMANASTRO493X25: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-216-0538
Lima Piatta Raspa C

152160538
LPTRM10: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-216-0384
Lima A Triangolo Ta

152160384
3LCNTRCNDOM5P: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-177-8370
Fraeserdorn

121778370
2462-7-5: RNCC: 3 | RNVC: 9

28 Feb 1979

5110-13-118-0035
Bow Saw

131180035
9-30-51-KP: RNCC: 3 | RNVC: 2

8 Nov 2000

5110-15-208-3778
Alesatore

152083778
3AAXFCFRDP5-8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-125-6838
Lima Per Meccanica

151256838
2565/2-8: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-244-0841

5110-17-701-5354
File Handle

177015354
171-80: RNCC: 3 | RNVC: 2

31 Aug 1971

5110-12-351-9121
End Cutting Nippers

123519121
6472120: RNCC: 3 | RNVC: 2
4003773017882: RNCC: 5 | RNVC: 2
00.15.95.43: RNCC: 5 | RNVC: 2

14 Sep 2000

5110-25-116-3272
Wood Scraper

5110-33-209-4182
Hand Operated Wire Rope Cutter

332094182
0738089200: RNCC: 3 | RNVC: 2

7 Dec 2011

5110-14-366-7143

5110-21-893-1370
Embossing Carriage

218931370
459: RNCC: 3 | RNVC: 2

7 Aug 1983

5110-99-910-4993
Hand File

999104993
C00RDPATH4021: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT6: RNCC: 6 | RNVC: 9
1A987: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-22-607-3274
Hand File

226073274
1-170-08-2-0: RNCC: 3 | RNVC: 2
8020002: RNCC: 3 | RNVC: 2

8 Jun 2004

5110-21-637-4309
Hand Masonry Drill

216374309
MS17065-1: RNCC: 2 | RNVC: 2
13 1-4: RNCC: 3 | RNVC: 2
1215-12: RNCC: 3 | RNVC: 2

18 Dec 1967

5110-21-880-8933
Craftsman's Knife

218808933
275-0453: RNCC: 3 | RNVC: 2
L: RNCC: 5 | RNVC: 2

3 Jul 1980

5110-15-220-4401
Coltello

152204401
COLTELLO: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-117-5226

5110-22-304-2919

5110-22-304-2915

5110-15-000-3910
Wire Stripper Blade

150003910
UTAV6399: RNCC: 3 | RNVC: 2

27 Feb 2013

5110-12-010-5254

5110-12-126-1674

5110-12-126-1920
Hand Cold Chisel

121261920
3639A: RNCC: 3 | RNVC: 2
1074432: RNCC: 5 | RNVC: 2
107443: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-304-0838

5110-14-451-4104
Double Bow Cutting Punch

144514104
245.J2DIAM24: RNCC: 3 | RNVC: 2

19 Nov 1991

5110-99-335-4849
Hand File

993354849
BS498: RNCC: 4 | RNVC: 1
37-50073: RNCC: 5 | RNVC: 2

11 Dec 1995

5110-66-039-2138
Valve Seat Cutter

660392138
145411: RNCC: 3 | RNVC: 2

23 Apr 1971

5110-12-318-2713
Cable Stripper Blade

123182713
CR: RNCC: 3 | RNVC: 2
2510: RNCC: 5 | RNVC: 2
CR: RNCC: 5 | RNVC: 2
2510: RNCC: 5 | RNVC: 2

26 Jun 1989

5110-25-128-7335
Multipurpose Folding Knife

251287335
197-29471: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-15-125-9933
Lame Per Ferro

151259933
S918E: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-25-121-0548

5110-33-106-4227
Diagonal Cutting Pliers

331064227
5.260: RNCC: 3 | RNVC: 2

19 Dec 1997

5110-21-808-5271
Single Bow Cutting Punch

218085271
147: RNCC: 3 | RNVC: 1
1804-5: RNCC: 3 | RNVC: 1

2 Aug 1968

5110-99-724-1590
Blade Set

997241590
45-611: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-21-899-4738
Paper Cutter

218994738
M328 41340: RNCC: 3 | RNVC: 2

2 Aug 1985

5110-66-019-7355
Hand Reamer

660197355
HAND REAMER: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-14-324-7007

5110-14-244-0699

5110-12-340-3775
End Cutting Nippers

123403775
3799HEF: RNCC: 3 | RNVC: 2

2 Apr 1996

5110-13-121-4969
Hand Cable Stripper

131214969
033262: RNCC: 3 | RNVC: 2

22 Nov 2012

5110-66-150-1496
Hand Rasp

661501496
NO PRIMARY REF 66-150-1496: RNCC: 3 | RNVC: 2
07155408: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-126-2495
Bucksaw Blade

121262495
DIN7245-D700S: RNCC: 2 | RNVC: 2
D700SDIN7245: RNCC: 5 | RNVC: 2
D550DIN7245: RNCC: 5 | RNVC: 9
DIN7245D700S: RNCC: 5 | RNVC: 9

30 May 1969

5110-41-000-7533
Hand Metal Stamping Die

410007533
GEPS14/6Z: RNCC: 3 | RNVC: 2

18 Aug 2008

5110-27-000-7826
Diagonal Cutting Pliers

270007826
3700 46 2160: RNCC: 2 | RNVC: 1
3700 46 0160: RNCC: 2 | RNVC: 1
3700 46 2160: RNCC: 2 | RNVC: 1
3700 46 0160: RNCC: 2 | RNVC: 1
3700 46 0160: RNCC: 2 | RNVC: 1
3700 46 0160: RNCC: 3 | RNVC: 2
3700 46 0160: RNCC: 5 | RNVC: 1
3700 46 2160: RNCC: 5 | RNVC: 9
AST-100-019: RNCC: 5 | RNVC: 9
3700462160: RNCC: 5 | RNVC: 9

11 Dec 2002

5110-66-149-7535
Hand File

661497535
NO PRIMARY REF 66-149-7535: RNCC: 3 | RNVC: 2
07083800: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-21-905-9595
File Handle

219059595
1200-140MM: RNCC: 3 | RNVC: 2

4 Mar 1989

5110-99-910-9982
Hand Reamer

999109982
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16252: RNCC: 6 | RNVC: 9
10144: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-942-0084
Hand Reamer

999420084
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-807-1125
Hand Reamer

218071125
RP687: RNCC: 3 | RNVC: 2

23 Nov 1966

5110-15-165-4211
Tronchese

151654211
071: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-98-206-0934
Hand File Set

982060934
DFAMPD04108: RNCC: 2 | RNVC: 2

13 Aug 2004

5110-14-570-9777
Doweling Jig

145709777
6501CEG100001: RNCC: 3 | RNVC: 2

9 Feb 2012

5110-12-307-5426
Rectangular Cutting Punch

123075426
042 6070: RNCC: 3 | RNVC: 2
3443: RNCC: 5 | RNVC: 9

30 Jun 1986

5110-15-208-5029
Scalpello

152085029
3SANFLCNZ28: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-613-8828
Cable Stripper Blade

226138828
5703484940033: RNCC: 3 | RNVC: 2
MC301: RNCC: 3 | RNVC: 2
2997100972: RNCC: 5 | RNVC: 2

21 Aug 2006

5110-99-130-2297
St Cutter Blade Kit

991302297
J015: RNCC: 3 | RNVC: 2
DP3629: RNCC: 3 | RNVC: 2
J015: RNCC: 5 | RNVC: 2

10 May 1980

5110-15-136-3010
Coltello A Lame Ret

151363010
0846-04716: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-816-6393
Dimpling Die

218166393
ZT2953-3/32: RNCC: 3 | RNVC: 2
ZT2953-3-32: RNCC: 5 | RNVC: 2

28 Aug 1964

5110-12-126-1444
Hand Reamer

121261444
NO PRIMARY REF 12-126-1444: RNCC: 3 | RNVC: 2
7DIN206SS: RNCC: 5 | RNVC: 9

30 May 1969

5110-34-037-6603
Batte Tool Kti

340376603
44800081: RNCC: 5 | RNVC: 2

1 Oct 2009

5110-98-107-7168
Hand Reamer

981077168
PARALLEL1-1/32X5X10IN.: RNCC: 3 | RNVC: 2

10 Feb 1984

5110-99-466-1370
Hand Reamer

994661370
NO PRIMARY REF 99-466-1370: RNCC: 3 | RNVC: 2
1G526: RNCC: 5 | RNVC: 2
3/32: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-230-9551
Scalpello

152309551
SG/9000: RNCC: 3 | RNVC: 2
511015E142195: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-068-3972
Handle File Wood

150683972
2625/130: RNCC: 3 | RNVC: 2

23 Sep 1983

5110-22-304-0208

5110-22-304-0251

5110-22-255-2749

5110-27-000-8046
Single Bow Cutting Punch

270008046
5700 24 0007: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-21-905-9855
Straight Trimmers Shears

219059855
S1180-5: RNCC: 3 | RNVC: 2

6 Jul 1989

5110-21-876-0195
Hand Metal Stamping Die Set

218760195
2585: RNCC: 3 | RNVC: 1
1567Y211: RNCC: 3 | RNVC: 2

13 Apr 1977

5110-15-165-3770
Raschietto Per Met

151653770
32681: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-385-2749
Oval Cutting Punch

123852749
50.000.106: RNCC: 3 | RNVC: 2

17 May 2011

5110-98-105-8748
Hand Reamer

981058748
NO PRIMARY REF 98-105-8748: RNCC: 3 | RNVC: 2
METRIC 2003-5.5MM: RNCC: 5 | RNVC: 2

30 May 1978

5110-21-901-6473
Hand File

219016473
936823: RNCC: 3 | RNVC: 2

13 Jun 1986

5110-15-214-4482
Set Lime Ad Ago

152144482
AS.12LTP180T4: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-639-4383
Hand File

216394383
911525: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1
1F56600: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-14-490-8857
Alesoir

144908857
4067 010 001 863: RNCC: 3 | RNVC: 2
F300 0T 000 5129: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-14-338-3098

5110-15-193-3527
Angle Die Grinder

151933527
1934AN: RNCC: 3 | RNVC: 2

7 May 2010

5110-98-205-5263
Hand Metal Cutting Shears

982055263
DFAMPD00252: RNCC: 2 | RNVC: 2

5 Feb 2001

5110-12-389-1153
Scraping Knife

123891153
23159: RNCC: 3 | RNVC: 2
430 40: RNCC: 5 | RNVC: 2

29 May 2012

5110-66-010-9000
Hand Reamer Set

660109000
019154: RNCC: 3 | RNVC: 2
MICR0SETN01: RNCC: 3 | RNVC: 2
CES10130: RNCC: 5 | RNVC: 2
05880704: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-17-120-2918
Hand Metal Cutting Shears

171202918
09257101: RNCC: 3 | RNVC: 2
ZV.09257101: RNCC: 5 | RNVC: 2

26 Mar 2007

5110-22-612-4572
Single Bow Cutting Punch

226124572
71508: RNCC: 3 | RNVC: 2

12 Jan 2006

5110-98-205-6548
Hand File

982056548
DFAMPD00100 G: RNCC: 2 | RNVC: 2

6 Jul 2001

5110-15-218-3555
Cacciavite A Taglio

152183555
SGD306A: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-608-9901
Hand Reamer

226089901
F1131*42: RNCC: 3 | RNVC: 2
F1131*42: RNCC: 3 | RNVC: 2

7 Dec 2004

5110-15-161-9410
Scalpello Marca Dre

151619410
SCAL005: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-27-024-5118
Hand File

270245118
00124081: RNCC: 2 | RNVC: 1
07701676934: RNCC: 2 | RNVC: 1

6 Nov 2004

5110-15-184-7327
Ferro Per Sponderuo

151847327
3IANSRSQ12: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-171-0429
File Handle

121710429
51575010: RNCC: 3 | RNVC: 9

1 Sep 1977

5110-12-368-9743
Hand Metal Cutting Shears

123689743
D122S: RNCC: 3 | RNVC: 2
00.19.90.50: RNCC: 5 | RNVC: 2

10 May 2006

5110-15-209-4016
Kit Punzoni Alfabet

152094016
KIT-PUNZ0-9 A-Z: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-329-8807
Hand Reamer

123298807
HSS012011-7: RNCC: 3 | RNVC: 2

8 Oct 1992

5110-15-144-5182
Scalpelli Ad Unghia

151445182
A2931G125: RNCC: 3 | RNVC: 2
3603-2-1: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-15-148-9871
Lever

151489871
LC: RNCC: 3 | RNVC: 2

9 Nov 1998

5110-15-002-4744
Countersink Cutter

150024744
34004 14 2099: RNCC: 3 | RNVC: 2

29 Aug 2013

5110-15-165-3789
Tronchese Per Mecca

151653789
1807180: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-143-3999
Utensile Da Tornio

151433999
777-14-20: RNCC: 3 | RNVC: 2
777/14-20: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-12-129-3899
Hand Reamer

121293899
DIN859-B21-HSS: RNCC: 2 | RNVC: 2
11606999-21: RNCC: 3 | RNVC: 2
415-21,00: RNCC: 3 | RNVC: 2
011011-21: RNCC: 3 | RNVC: 2
11606HSS21: RNCC: 5 | RNVC: 2
21DIN859SCHNELLARBEITSSTAHLSPIR-: RNCC: 5 | RNVC: 9

30 May 1969

5110-37-515-8073
Electricians' Scissors

375158073
P220: RNCC: 3 | RNVC: 2

26 Sep 2008

5110-27-059-9631
Hand Operated Wire Rope Cutter

270599631
8 INC: RNCC: 2 | RNVC: 1

16 Dec 2013

5110-66-010-7933
Adjustab Blade Set

660107933
M.H. BLADE SET: RNCC: 3 | RNVC: 2
365 300330: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-15-208-5352
Tronchese

152085352
3TAHFDCNDRN155: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-104-9991
Revolving He Cutter

211049991
155-1: RNCC: 3 | RNVC: 2
310827: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-99-737-8739
Cutter

997378739
21825766: RNCC: 3 | RNVC: 2
GA5020/1: RNCC: 5 | RNVC: 9
GAV5020/1: RNCC: 5 | RNVC: 9

25 Apr 1991

5110-12-173-9341
Zentriervorrichtung

121739341
4650A: RNCC: 3 | RNVC: 2

23 May 1978

5110-99-131-0959
Craftsmans Knife

991310959
608.03: RNCC: 3 | RNVC: 2

16 Feb 1994

5110-66-146-7424
Hand Reamer

661467424
547162A: RNCC: 3 | RNVC: 2
547162A: RNCC: 5 | RNVC: 2

24 Aug 2000

5110-15-215-4380
Falcioni Da Siepi V

152154380
FALCIONIDASIEPIVALSECCHI: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-210-2338
Bloccaggio Rapido F

152102338
MR80P: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-987-8688
Craftsman's Knife

999878688
0-10-550: RNCC: 3 | RNVC: 2

24 Mar 1995

5110-15-124-3520
Cesoia Tagliacavo L

151243520
148002: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-175-5891
Serie Lime 6 Pz.

151755891
EX5110RI4217451: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-12-370-9274
Hand Cold Chisel

123709274
310 350 1: RNCC: 3 | RNVC: 2
00.06.09.27: RNCC: 5 | RNVC: 2

17 Jan 2007

5110-14-270-3956

5110-14-527-0338
Enclosed Blade Tube Deburring Tool

145270338
D9851-14M1008: RNCC: 3 | RNVC: 2

26 Sep 2001

5110-99-209-5535
Cutter Assembly

992095535
NO PRIMARY REF 99-209-5535: RNCC: 3 | RNVC: 2
ST162: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-218-0891
Punta Per Martello

152180891
434080052: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-175-9174
Brick Chisel

121759174
51264520: RNCC: 3 | RNVC: 9
51264030: RNCC: 5 | RNVC: 9

25 Oct 1978

5110-20-004-7153
Bowsaw / Hacksaw

200047153
57-7481-8: RNCC: 3 | RNVC: 2

1 Apr 2009

5110-15-212-4381
Forbici Per Potatur

152124381
SHARK8.5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-13-120-6815
Tailor's Shears

131206815
N5135: RNCC: 3 | RNVC: 2
N5135: RNCC: 5 | RNVC: 9

13 Oct 2009

5110-99-910-5790
Saws Nested Blade

999105790
UKD1S2108A: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-12-316-6084
Hand Hacksaw Frame

123166084
424300: RNCC: 3 | RNVC: 2

27 Jan 1989

5110-12-322-9636

5110-12-177-4548
Hand File

121774548
2901020: RNCC: 3 | RNVC: 2

31 Jan 1979

5110-15-220-5058
Scalpello Per Faleg

152205058
SCALPELLOMM.30: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-910-9989
Hand Reamer

999109989
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA1627: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-157-0033
Drehwerkzeug

121570033
4663N: RNCC: 3 | RNVC: 2
4663: RNCC: 5 | RNVC: 2

30 May 1969

5110-21-639-6367
Wood Scraper

216396367
3116: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-98-102-0157
Hand File

981020157
150MM RD 2ND CUT: RNCC: 3 | RNVC: 2
6IN.ROUND SECOND CUT: RNCC: 3 | RNVC: 2
150MM RD 2ND CUT: RNCC: 5 | RNVC: 9
FA396V STUBS: RNCC: 6 | RNVC: 9

9 Aug 1979

5110-99-131-7830
Hand Reamer

991317830
ST4: RNCC: 3 | RNVC: 2

29 Jan 1998

5110-66-042-3601
Rabbet Plane

660423601
BS 3623: RNCC: 3 | RNVC: 1
12-079: RNCC: 3 | RNVC: 2

21 Jun 1971

5110-13-102-8915
Hand Reamer

131028915
NBN485H8-14CS: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-22-608-7063
Single Bit Ax

226087063
4.329.415.402: RNCC: 3 | RNVC: 2

13 Nov 2004

5110-66-076-9588
Hand File

660769588
6IN 3 SQUARE BASTARD: RNCC: 3 | RNVC: 2

26 Sep 1974

5110-15-183-3005
Fustella

151833005
160104: RNCC: 3 | RNVC: 2
160A-3,5MM.: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-137-9530
Tronchese A Taglien

151379530
1088016: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-141-1055
Tronchese A Taglio

151411055
405.10MT: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-14-541-1614
Travail Du B Bedane

145411614
7010060201: RNCC: 3 | RNVC: 2

14 May 2004

5110-15-208-2646
Alesatore

152082646
3AAWFCCNFQ26-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-3649
Fustella A Cavallot

151653649
308154: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-639-6440
Bearing Scraper

216396440
C: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-15-136-1912
Tronchese

151361912
1795-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-172-6168
Serie Lime Facom Mo

151726168
SERIE LIME FACOM MOD.STG: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-21-890-3572
A Hand Reamer Pilot

218903572
1651: RNCC: 3 | RNVC: 1
51101389: RNCC: 3 | RNVC: 2

27 Nov 1982

5110-14-497-2763
Coupe-Boulon

144972763
1140-0: RNCC: 3 | RNVC: 2
F300 0T 022 9303: RNCC: 6 | RNVC: 9

15 Oct 1997

5110-15-199-0849
Hand Metal Stamping Die Set

151990849
3681/1-8: RNCC: 3 | RNVC: 2
K3681/1-8: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-22-610-3315
Pliers

226103315
541D250: RNCC: 3 | RNVC: 2

11 May 2005

5110-27-000-8050
Single Bow Cutting Punch

270008050
5700 24 0011: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-15-145-5656
Serie Lime Facom Mo

151455656
511015C000008: RNCC: 3 | RNVC: 2

11 Jul 1997

5110-12-368-7590
Diagonal Cutting Pliers

123687590
74 05 250: RNCC: 3 | RNVC: 2
00.12.63.02: RNCC: 5 | RNVC: 2

13 Apr 2006

5110-25-132-4222
Hand Reamer

251324222
64925: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-15-165-3733
Pinze Per Anelli La

151653733
ART127: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-214-1484
Coltello Con Fodero

152141484
KER1060A: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-123-2400
Tronca Cavi Elettri

151232400
1132IS-230: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-37-515-8076
Scraping Knife

375158076
SCRC50: RNCC: 3 | RNVC: 2

26 Sep 2008

5110-15-216-1716
Filiera 20X1.5

152161716
SKF20X1-5: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-120-5141
Hand Oil Groove Chisel

121205141
2641-8: RNCC: 3 | RNVC: 2
197-8: RNCC: 5 | RNVC: 9
8DIN6455: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-910-5159
Turning Gouge

999105159
BS1943: RNCC: 4 | RNVC: 1
9105159: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-66-150-3872
Bolt Cutter Jaws

661503872
NO PRIMARY REF 66-150-3872: RNCC: 3 | RNVC: 2
07141409: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-639-4429
Hand File

216394429
905026: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1
1F59000: RNCC: 5 | RNVC: 9

4 Jun 1968

5110-99-601-0884
Hand Reamer

5110-99-607-2839

5110-15-134-4204
Raschietto

151344204
6042: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-66-013-5511
Hand File

660135511
R0UND6IN: RNCC: 3 | RNVC: 1
07076202: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-12-341-9619
Hand Operated Cable Cutter

123419619
9517200: RNCC: 3 | RNVC: 2
4003773026952: RNCC: 5 | RNVC: 2

21 Nov 1996

5110-15-208-4986
Scalpello Per Mecca

152084986
3SANMMUTZ250X9: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-244-0849

5110-12-385-2617
Oval Cutting Punch

123852617
50.000.189: RNCC: 3 | RNVC: 2

13 May 2011

5110-14-325-3426

5110-99-717-9754
Fore Plane

997179754
06: RNCC: 3 | RNVC: 2

28 Jun 1980

5110-25-102-4115

5110-25-100-4307
Compass Saw

5110-25-102-3825
Hand File

5110-15-216-7138
Cesoia Prosnip

152167138
20SL: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-184-8057
Forbici

151848057
4FNMELDR130: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-27-018-7897
Hand File

270187897
09013KE1012: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-98-203-2806
Paper Cutter

982032806
0124C: RNCC: 3 | RNVC: 2

23 Aug 1989

5110-21-893-0838
Hand Graver

218930838
36-582-1: RNCC: 3 | RNVC: 2
GR-100-2: RNCC: 3 | RNVC: 2
36-582: RNCC: 5 | RNVC: 2
25-555-2: RNCC: 5 | RNVC: 9

21 Mar 1983

5110-66-085-0785
Hand File

660850785
9104841-121: RNCC: 3 | RNVC: 2

25 Mar 1975

5110-12-148-6014
Hand Reamer

121486014
NO PRIMARY REF 12-148-6014: RNCC: 3 | RNVC: 2
101577: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-329-8799
Hand Reamer

123298799
HSS012011-00: RNCC: 3 | RNVC: 2

8 Oct 1992

5110-33-208-4822
Hand Metal Cutting Punch And Die

332084822
44-908: RNCC: 3 | RNVC: 2
8413947449085: RNCC: 5 | RNVC: 2

14 Jul 2010

5110-98-205-4826
Hand Metal Cutting Shears

982054826
DFAMPD00206: RNCC: 2 | RNVC: 2

18 Oct 2000

5110-15-210-4360
Lima Piatta A Punta

152104360
12000602: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-19-003-7892
Single Bow Cutting Punch

190037892
GRAZIANO REDONDO MANUAL 0.5 POL: RNCC: 3 | RNVC: 2

20 Jul 2010

5110-15-136-1398
Lama Di Ricambio Mm

151361398
1881-2-310: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-21-637-5614
Hand Reamer

216375614
CRITCHLEYANGLEBLADE: RNCC: 3 | RNVC: 1
K: RNCC: 5 | RNVC: 9
1F108550: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-15-211-1049
Scalpello Punta 50C

152111049
5.03: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-910-9984
Hand Reamer

999109984
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16256: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-9965
Hand Reamer

999109965
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16220: RNCC: 6 | RNVC: 9
10123: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-9981
Hand Reamer

999109981
BS122 PART 2: RNCC: 4 | RNVC: 1
10142: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16250: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-217-5491
Filiera 141 Ridgid

152175491
WXRI7905328: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-209-4893
Serie Lime 12 Pezzi

152094893
LIME12: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-432-8844

5110-99-432-8840

5110-21-639-5552
Tinner's Hollow Cutting Punch

216395552
ARAB: RNCC: 3 | RNVC: 2
101-1-3/4: RNCC: 3 | RNVC: 2
39GP44: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-25-105-7575

5110-15-208-4758
Lima Ago Triangolo

152084758
3LPKTRAGDDN140: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-016-5088
Recess Cutter

660165088
124011: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-230-0406

5110-22-617-4856
Pocket Scissors

226174856
861282150: RNCC: 3 | RNVC: 2

27 Jun 2008

5110-17-110-7040
Kit Schraper

171107040
330.001.001.002: RNCC: 3 | RNVC: 2

4 Feb 1997

5110-21-855-3216
Turning Chisel

218553216
476: RNCC: 3 | RNVC: 1
310415: RNCC: 6 | RNVC: 9

18 Nov 1969

5110-27-040-1813
Torna Kalemi

270401813
10X10X90: RNCC: 2 | RNVC: 1

10 Jan 2008

5110-21-806-3500

5110-17-701-4846
Spokeshave

177014846
12 151: RNCC: 3 | RNVC: 2

14 May 1970

5110-99-456-2160
Backed Saw

994562160
H6511: RNCC: 2 | RNVC: 2
F1FA16614: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-201-7241

5110-12-195-7566
Hand File

121957566
305-150-3: RNCC: 3 | RNVC: 2
305-150MM-3: RNCC: 5 | RNVC: 2
1284-150MM-3: RNCC: 5 | RNVC: 9

11 Apr 1983

5110-12-161-6361
Hand File

121616361
DIN7261-F400-1: RNCC: 2 | RNVC: 2
3162401: RNCC: 3 | RNVC: 2
F400-1DIN7261: RNCC: 5 | RNVC: 2
1162-400-1: RNCC: 5 | RNVC: 2
DIN7261F400-1: RNCC: 5 | RNVC: 9
1393716112282110: RNCC: 5 | RNVC: 9
0808396029889: RNCC: 5 | RNVC: 9
TGL 48-74114,400X16,1: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-126-2012
Nozzle Broach

121262012
162000-0,9: RNCC: 3 | RNVC: 2
1620-0-9: RNCC: 5 | RNVC: 2
235-0-9: RNCC: 5 | RNVC: 9
W446-0-9: RNCC: 5 | RNVC: 9

30 May 1969

5110-27-010-6726
Hand File

270106726
99999-NIIN-DA0014380: RNCC: 2 | RNVC: 1
TXXF-06: RNCC: 2 | RNVC: 1

11 Nov 2002

5110-99-317-8214
Scraper Blade

993178214
13961099: RNCC: 3 | RNVC: 2
FL982TF0421: RNCC: 6 | RNVC: 9

14 Jul 1999

5110-66-149-3472
Pocket Scissors

661493472
975476: RNCC: 3 | RNVC: 2
74654400: RNCC: 5 | RNVC: 2
975476: RNCC: 5 | RNVC: 2

3 Apr 2003

5110-15-208-5345
Pettine S 24 Pezzi

152085345
4PIEWT24S: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-104-9993
Revolving He Cutter

211049993
155-3: RNCC: 3 | RNVC: 2
310829: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-14-310-4963
Socle Decoupage

143104963
568-5-6: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-34-031-2125
Extension Bar

340312125
TRAK 3 TON GS CARGO TATA-4: RNCC: 3 | RNVC: 2
TRAK 3 TON GS CARGO TATA-4: RNCC: 6 | RNVC: 9

24 Feb 2004

5110-21-639-4405
Hand File

216394405
912199: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-12-126-2511
Hand Metal Cutting Shears

121262511
106-300: RNCC: 3 | RNVC: 9

30 May 1969

5110-22-610-0757
Hand File

226100757
7311518202880: RNCC: 3 | RNVC: 2

4 Apr 2005

5110-15-190-3657
Trivello Con Anello

151903657
3UANAACL12: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-99-991-3087
Reamerline

999913087
R6Y206/42: RNCC: 3 | RNVC: 2
26DL-96102: RNCC: 6 | RNVC: 9

20 Jun 2002

5110-12-126-1925
Brick Chisel

121261925
350250: RNCC: 3 | RNVC: 2
DIN7254-B250: RNCC: 4 | RNVC: 1
51264510: RNCC: 5 | RNVC: 9
130034-300X23: RNCC: 5 | RNVC: 9

30 May 1969

5110-22-221-4813
Smooth Plane

222214813
VH111-51: RNCC: 3 | RNVC: 2

1 Aug 1973

5110-99-750-8225
Circle Cutter

997508225
PLM3: RNCC: 3 | RNVC: 2
MK3/51-255: RNCC: 5 | RNVC: 2

6 Oct 1987

5110-15-219-4626
Svasatore Master D8

152194626
0208628: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-266-7020

5110-15-189-9981
Forbici Per Elettri

151899981
011280000: RNCC: 3 | RNVC: 2
(241)A53875387.AT.11.0001: RNCC: 5 | RNVC: 2
5387.AT.11.0001: RNCC: 5 | RNVC: 2

1 Mar 2010

5110-15-214-9612
Tranciabulloni 8Mm

152149612
BC450: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-357-1770
Hand Operated Cable Cutter

123571770
9516200: RNCC: 3 | RNVC: 2
4003773026761: RNCC: 5 | RNVC: 2

15 May 2002

5110-12-021-4747

5110-13-102-8928
Hand Reamer

131028928
A175-4M0RSEAFSTR: RNCC: 3 | RNVC: 9
LETIGRE7310-4: RNCC: 5 | RNVC: 2

1 Apr 1975

5110-15-199-1066
Raschietto Per Meta

151991066
3273/2-150: RNCC: 3 | RNVC: 2

12 Jan 2005

5110-15-161-4772
Serie Cacciaspine 4

151614772
SERIE CACCIASPINE 4 PEZZI: RNCC: 3 | RNVC: 2

1 Oct 2000

5110-15-230-0215
Lima Tonda

152300215
8-B: RNCC: 3 | RNVC: 2
511015E123586: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-215-4007
Cacciavite A Taglio

152154007
483L0009: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-637-5275
Hand Reamer

216375275
4500: RNCC: 3 | RNVC: 1
50-10933: RNCC: 3 | RNVC: 2
GGGR180: RNCC: 4 | RNVC: 1
B174-2: RNCC: 4 | RNVC: 1
B94-2: RNCC: 4 | RNVC: 1
TMEX2: RNCC: 5 | RNVC: 1
B5-14 9-32: RNCC: 5 | RNVC: 2
4500 9-32: RNCC: 5 | RNVC: 2

7 Nov 1966

5110-21-800-6733
Scraping Knife

218006733
K31: RNCC: 3 | RNVC: 2
B38-2178: RNCC: 3 | RNVC: 2
B38WH3X4 1-2: RNCC: 5 | RNVC: 2

5 Feb 1964

5110-17-110-7376
Hand Reamer

171107376
P926-0,2760-0,2600: RNCC: 3 | RNVC: 2
P926: RNCC: 6 | RNVC: 9

18 Feb 1997

5110-15-214-9660
Tronchese A Taglio

152149660
2101G-125: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-27-011-7715
Hand Reamer

270117715
10111KR5016: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-134-5740
Ricambio Coltelli

151345740
314CFA5: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-182-5828
Tagliacavo

151825828
615-9114: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-27-010-6598
Hand File

270106598
41F1103: RNCC: 2 | RNVC: 1
99999-NIIN-DA0037228: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-33-202-4833
Firmer Chisel

332024833
424-18: RNCC: 3 | RNVC: 2

10 Jul 2003

5110-15-192-8020
Scalpello Largo

151928020
050945: RNCC: 3 | RNVC: 2

26 Mar 2010

5110-66-120-4953
Hand Reamer

661204953
ADJUSTABLE REAMER: RNCC: 3 | RNVC: 1
653 0077: RNCC: 3 | RNVC: 2
MA: RNCC: 5 | RNVC: 9

14 Jun 1984

5110-15-165-3664
Alesatore Registrab

151653664
6221275: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-16-005-3981
Pocket Knife

160053981
54172-001: RNCC: 3 | RNVC: 2
54172-001: RNCC: 5 | RNVC: 2
54172-001: RNCC: 5 | RNVC: 2

17 Mar 2006

5110-27-010-6679
Hand File

270106679
99999-NIIN-DA0014069: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-309-0757
Hand File

123090757
2407-160-2: RNCC: 3 | RNVC: 2
2132162: RNCC: 3 | RNVC: 2
51402206: RNCC: 5 | RNVC: 2
2132-160-2: RNCC: 5 | RNVC: 2

11 Dec 1986

5110-21-814-2555
Cutting Pliers

218142555
D224-4 1-2C: RNCC: 3 | RNVC: 2
EC54: RNCC: 3 | RNVC: 2
EC54F: RNCC: 5 | RNVC: 2
204-6: RNCC: 5 | RNVC: 9
620G: RNCC: 5 | RNVC: 9
211S: RNCC: 5 | RNVC: 9

12 May 1964

5110-15-236-1248
Seghetto Potatura M

152361248
R340-317: RNCC: 3 | RNVC: 2
511015E068440: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-236-0588
Cassetta Lame 2 Pas

152360588
739-562: RNCC: 3 | RNVC: 2
511015E070131: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-12-146-5106
Hand Cold Chisel

121465106
NM247-03: RNCC: 3 | RNVC: 2
NM247-03: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-150-2184
Hand Cold Chisel

661502184
NO PRIMARY REF 66-150-2184: RNCC: 3 | RNVC: 2
07656800: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-12-130-9626
Ven Schneideinsatz

121309626
21861210: RNCC: 3 | RNVC: 2
218.61.210: RNCC: 5 | RNVC: 2
900-6VD3C3: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-218-8620
Tronchese

152188620
66079110: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-98-106-9091
Hand Hacksaw Blade

981069091
12X1/2X0.025 PROGRESSIVE: RNCC: 3 | RNVC: 2

16 Mar 1982

5110-27-011-5042
Hand File

270115042
10121ME0088: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-218-3270
Pinzetta Di Precisi

152183270
7/01512: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-608-7147
Hole Saw

226087147
4213210160: RNCC: 3 | RNVC: 2

13 Nov 2004

5110-12-124-4229
Pocket Knife

121244229
58536H: RNCC: 3 | RNVC: 2

30 May 1969

5110-14-469-1879
Outil De Rectificat

144691879
DLP780110: RNCC: 3 | RNVC: 2
RAB3213: RNCC: 5 | RNVC: 2

13 Apr 1994

5110-15-138-1291
Spaccadadi

151381291
490/1: RNCC: 3 | RNVC: 2
490001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-165-4022
Impugnatura Di Legn

151654022
9723: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-27-010-6714
Hand File

270106714
99999-NIIN-DA0037104: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-155-8803
Pocket Knife

121558803
2484: RNCC: 3 | RNVC: 2

30 May 1969

5110-12-331-6061
Knife Blade

123316061
73.21: RNCC: 3 | RNVC: 2
73: RNCC: 5 | RNVC: 2

27 May 1993

5110-21-883-1730
Riffler

218831730
STYLE3: RNCC: 3 | RNVC: 1
941012: RNCC: 5 | RNVC: 2

27 Jan 1981

5110-17-702-2660
Hand File

177022660
3722: RNCC: 3 | RNVC: 2

15 May 1970

5110-22-601-7175
Chisel Bar

21 Oct 2002

5110-14-414-6639
Pliers

144146639
85220S: RNCC: 3 | RNVC: 2

23 Feb 1987

5110-12-360-1801
Knife Blade

123601801
98.70: RNCC: 3 | RNVC: 2

14 Apr 2003

5110-98-205-9585
Bow Saw

982059585
DFAMPD03188: RNCC: 2 | RNVC: 2

17 Nov 2003

5110-22-606-5660
Hand Cold Chisel

226065660
157388: RNCC: 3 | RNVC: 2

27 Feb 2004

5110-20-004-7587
Hand File

200047587
FMS8: RNCC: 3 | RNVC: 2

20 Apr 2009

5110-99-342-1197
Hand Saw

993421197
5-20-088: RNCC: 3 | RNVC: 2
08129-002: RNCC: 6 | RNVC: 9

28 Feb 2008

5110-12-307-7238
Hand File

123077238
2113161: RNCC: 3 | RNVC: 2
2416-160-1: RNCC: 3 | RNVC: 2
2113-160-1: RNCC: 5 | RNVC: 2

18 Jul 1986

5110-34-037-6992
Knife Blade

340376992
CUT-BL-MIKI-02: RNCC: 5 | RNVC: 2

2 Sep 2008

5110-21-865-8255
Hand File

218658255
NO PRIMARY REF 21-865-8255: RNCC: 3 | RNVC: 2

14 Apr 1972

5110-14-244-0721

5110-99-466-8569
Hand File

994668569
BS498 PART 1: RNCC: 4 | RNVC: 1
3393: RNCC: 5 | RNVC: 1
BS496 PART 1: RNCC: 5 | RNVC: 2
1A4547: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-883-1798
Hand File

218831798
39GP30: RNCC: 4 | RNVC: 1

27 Jan 1981

5110-15-208-5031
Scalpello

152085031
3SANFLCNZ25: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-876-0115
Hand File

218760115
40506: RNCC: 3 | RNVC: 2
ZU62: RNCC: 3 | RNVC: 2
39GP53: RNCC: 4 | RNVC: 1
6P: RNCC: C | RNVC: 1

22 Mar 1977

5110-14-221-8231

5110-14-241-0387

5110-22-611-2317
Finger Grip Hand Saw

226112317
2700-22-XT7-HP: RNCC: 3 | RNVC: 2
7311518191672: RNCC: 3 | RNVC: 2

11 Aug 2005

5110-14-201-5338
Blacksmith's Chisel

142015338
3842-38EMMANCHE: RNCC: 3 | RNVC: 2
M0B6-38EC: RNCC: 3 | RNVC: 2

1 Jan 1962

5110-14-377-9461
Boiler Tube Cutter Cutter Bit

143779461
200-123: RNCC: 3 | RNVC: 2

10 Jun 1982

5110-22-607-5115
Diagonal Cutting Pliers

226075115
535E: RNCC: 3 | RNVC: 2
535E: RNCC: 5 | RNVC: 2

25 Jun 2004

5110-15-210-5458
Coltelli In Acciaio

152105458
367: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-883-1718
Riffler

218831718
STYLE2: RNCC: 3 | RNVC: 1
941006: RNCC: 5 | RNVC: 2

27 Jan 1981

5110-15-125-3182
Bastone Per Ravviva

151253182
3956: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-209-2404
Spatola Da Mm. 70

152092404
SPATOLAMM70: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-218-0228
Lima A Coltello

152180228
5-250-06-0-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-886-7135
Dimpling Die

218867135
ZT1863-#5/16-24: RNCC: 3 | RNVC: 2
ZT1863-5-16-24: RNCC: 5 | RNVC: 2

9 Nov 1981

5110-66-047-4633
Therm Wire Stripper

660474633
RE1300-47: RNCC: 3 | RNVC: 2

18 Feb 1972

5110-14-439-7336
Couteau A Degainer

144397336
05340001000: RNCC: 3 | RNVC: 2
534-001: RNCC: 5 | RNVC: 2
3597470085509: RNCC: 5 | RNVC: 2

21 May 1990

5110-99-428-9647
Hand Reamer

994289647
BS122: RNCC: 4 | RNVC: 1
F1FA16351: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-124-9685
Coltello A Serraman

151249685
1130: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-173-2129
Lama Usag Mod.200 M

151732129
200105: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-197-5412
Chiave Universale P

151975412
PN UAS 00036426: RNCC: 3 | RNVC: 2
5110F76030582: RNCC: 5 | RNVC: 9

8 Apr 2004

5110-15-208-4824
Alesatore Cilin.Tip

152084824
3AAXFCFRDP6-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-105-9097
Diagonal Cutting Pliers

251059097
2113-4: RNCC: 3 | RNVC: 2
2113-4: RNCC: 3 | RNVC: 2

1 Jan 1984

5110-20-002-7109
Hand Operated Wire Rope Cutter

200027109
PWC56365: RNCC: 3 | RNVC: 2

24 May 2006

5110-15-221-4901
Archetto

152214901
EX5110RN0401258: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-134-3916
Pinza Con Tronchese

151343916
IC253G200: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-12-342-0624
Hand Hacksaw Blade

123420624
310: RNCC: 3 | RNVC: 2

5 Dec 1996

5110-15-208-4578
Alesatore

152084578
3AANFCFMEQ13-75: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-014-5893
Hand Hacksaw Blade

660145893
HSF2412: RNCC: 3 | RNVC: 2
06901006: RNCC: 5 | RNVC: 2
0974 1111: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-14-259-3855

5110-21-851-2638
Single Bit Ax

218512638
52: RNCC: 3 | RNVC: 2
5110-0013: RNCC: 5 | RNVC: 9

6 Oct 1968

5110-14-264-7862
Tube Cutter

142647862
NO PRIMARY REF14-264-7862: RNCC: 3 | RNVC: 2
310-3: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-25-102-7806
Double Bow Cutting Punch

251027806
SBF5110HVK1A: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-16-002-7103
Hand File Set

160027103
286213931626: RNCC: 3 | RNVC: 2
413113931606: RNCC: 3 | RNVC: 2
413113931626: RNCC: 3 | RNVC: 2

10 Dec 2002

5110-15-235-9449
Archetto Fisso

152359449
72210001: RNCC: 3 | RNVC: 2
511015E131810: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-13-120-5932
Cutting Punch Insert

131205932
P18 500 00 PLAT: RNCC: 3 | RNVC: 2

8 May 2009

5110-15-212-3526
Tronchese Isolament

152123526
011001: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-101-9366

5110-25-110-9734

5110-22-623-1999
Scraper Blade

226231999
21730205: RNCC: 3 | RNVC: 2

10 Nov 2011

5110-27-019-4630
Hand File

270194630
10091KEGE0076: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-19-003-7889
Single Bow Cutting Punch

190037889
GRAZIANO REDONDO MANUAL N13: RNCC: 3 | RNVC: 2

20 Jul 2010

5110-27-058-9411
Hand File

270589411
TSF 04: RNCC: 2 | RNVC: 1
TSF 04: RNCC: 5 | RNVC: 9

2 May 2013

5110-17-109-9351
Boormal Antennebeve

171099351
818.5271: RNCC: 3 | RNVC: 2

13 Mar 1996

5110-17-101-6989
Steel Strapping Cutter

171016989
TVA3450-2-265-058-2.2: RNCC: 3 | RNVC: 2
TYMER SUPER: RNCC: 5 | RNVC: 9

16 Sep 1987

5110-12-131-6991
Drehwerkzeug Pilot

121316991
217.71.147: RNCC: 3 | RNVC: 2
300-14: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-105-2389
Bearing Scraper

211052389
D: RNCC: 3 | RNVC: 2
1F116800: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-25-100-8904

5110-14-572-6082
Diagonal Cutting Pliers

145726082
416.E: RNCC: 3 | RNVC: 2

17 Jul 2012

5110-15-171-8703
Giravite Prensile T

151718703
GIRAVITE PRENSILE TAGLIO FACOM M: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-216-4653
Lima Tonda Taglio B

152164653
3LCNTOCNBSN10P: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-134-5512
Sega A Dorso

151345512
4720G: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-216-4857
Scalpello A Spatola

152164857
3SANCNPPZ400: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-105-1494
Saw Handle

211051494
2: RNCC: 3 | RNVC: 1
1F77520: RNCC: 5 | RNVC: 2

4 Jun 1968

5110-21-639-5711
Knockout Punch And Die

216395711
MS16323-7: RNCC: 2 | RNVC: 2
730: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-12-381-9023
Hand Hacksaw Blade

123819023
1110300C: RNCC: 3 | RNVC: 2
1110300S: RNCC: 5 | RNVC: 9

15 Apr 2010

5110-15-215-3986
Chiave Da 11 Pastor

152153986
88300011: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-98-200-9271
Reamer Blade Set

982009271
NO PRIMARY REF 98-200-9271: RNCC: 3 | RNVC: 2
ST 18: RNCC: 5 | RNVC: 2

20 Feb 1987

5110-21-849-7778
Hand File

218497778
5110-0351: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-99-229-5124
Pocket Folding Multi-Tool

992295124
KT-200-626: RNCC: 3 | RNVC: 2

4 Jan 2011

5110-99-549-6232
Diagonal Cutting Pliers

995496232
609-433: RNCC: 3 | RNVC: 2
609-433: RNCC: 5 | RNVC: 2

11 Sep 2003

5110-12-120-9074
Hand Hacksaw Blade

121209074
A300X16X24DIN6494LEGIERTERWSTAHL: RNCC: 2 | RNVC: 2
40221102: RNCC: 3 | RNVC: 2
A300X22DIN6494: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-187-3272
Hand Metal Cutting Shears

121873272
2704: RNCC: 3 | RNVC: 2
7314151066956: RNCC: 5 | RNVC: 2

30 Mar 1981

5110-99-978-1907
Nut Splitter

999781907
NS2: RNCC: 3 | RNVC: 2
NS2: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-21-849-7993
Bolt Cutter

218497993
603ACC: RNCC: 3 | RNVC: 2
5110-0231: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-99-910-4248
Paring Chisel

999104248
DEFSTAN51-11 PART 27: RNCC: 4 | RNVC: 1
DL9A: RNCC: 5 | RNVC: 9
DL9A-H433: RNCC: 5 | RNVC: 9
1A424: RNCC: 6 | RNVC: 9
H433: RNCC: 6 | RNVC: 9
FA11338: RNCC: 6 | RNVC: 9
H433: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-371-7765
Wire Stripper Blade

143717765
414113: RNCC: 3 | RNVC: 2
14: RNCC: 5 | RNVC: 2
414013: RNCC: 5 | RNVC: 2
Z: RNCC: 5 | RNVC: 2
85-689-9257: RNCC: 6 | RNVC: 9

5 Aug 1981

5110-12-301-5048
Hand File

123015048
2132163: RNCC: 3 | RNVC: 2
2407-160-3: RNCC: 3 | RNVC: 2
2132-160-3: RNCC: 5 | RNVC: 2

19 Oct 1984

5110-21-899-4799
Dimpling Punch

218994799
ZT2055-3/16: RNCC: 3 | RNVC: 2
ZT2055-3-16: RNCC: 5 | RNVC: 2

12 Aug 1985

5110-14-398-5696
End Cutting Nippers

143985696
5175-12: RNCC: 3 | RNVC: 2

31 Jan 1985

5110-41-001-5474
Pocket Knife

410015474
7626-037: RNCC: 3 | RNVC: 2

24 Aug 2010

5110-15-206-3367
Electricians' Scissors

152063367
768810-140: RNCC: 3 | RNVC: 2
(241)AK761768810-140: RNCC: 5 | RNVC: 2

4 Jun 2012

5110-66-138-0241
Thread Restorer

661380241
NES1-55DEG: RNCC: 3 | RNVC: 2

9 Sep 1993

5110-15-221-9170
Taglia Balsa Stanle

152219170
98-611: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-4152
Tronchese

151654152
185002: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-202-8635
Electricians' Scissors

152028635
6015: RNCC: 3 | RNVC: 2
(241)AG4126015: RNCC: 5 | RNVC: 2

27 Aug 2007

5110-27-057-5807
Hand File

270575807
09013KE1081: RNCC: 5 | RNVC: 9

5 Sep 2012

5110-27-014-8943
Hand Reamer

270148943
3455ATF16447: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-15-208-4550
Alesatore

152084550
3AARPERMDQ8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-158-8576
Hand File Set

661588576
505 69 81-92: RNCC: 3 | RNVC: 2
505 69 81-92: RNCC: 5 | RNVC: 2

7 Sep 2010

5110-15-074-6199
File Holder

150746199
16INART110MEZZ0T0NDA: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-22-610-7925
Hand Reamer

226107925
F3417MK3: RNCC: 3 | RNVC: 2

22 Jun 2005

5110-15-197-0483
Sheet Metal Clip Punch

151970483
PN UAS 00028200: RNCC: 3 | RNVC: 2
5130F76010826: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-12-314-0286
Hand Wire Stripper

123140286
AB MK 1 F: RNCC: 3 | RNVC: 9

31 May 1988

5110-15-106-7546
Lama Tagliafili

151067546
9928/7: RNCC: 3 | RNVC: 2

30 May 1989

5110-21-887-7486
Concret Hand Chisel

218877486
84-3/4: RNCC: 3 | RNVC: 2

9 Jan 1982

5110-15-184-7587
Tagliabulloni

151847587
NSN511015R560121: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-66-093-8567
Bolt Cutter

660938567
24KC: RNCC: 3 | RNVC: 2
DEF(AUST)5810: RNCC: 4 | RNVC: 1

10 Sep 1977

5110-21-639-4281
Hand File

216394281
39GP30: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-15-212-2524
Confezione Lame

152122524
A2226: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-122-2522
Hand Reamer

121222522
513A103SS1-2: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-175-4182
Lama Di Ricambio

151754182
1897-2: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-208-4571
Alesatore Cilindric

152084571
3AAWFCFRDP15-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-063-9666
Knife Blade

660639666
1275MB: RNCC: 3 | RNVC: 1

30 Sep 1973

5110-66-010-8513
Poppet Valve Reamer

5110-22-615-4542
Wood Scraper

226154542
4293500370: RNCC: 3 | RNVC: 2

25 Jun 2007

5110-13-116-5229
Hand Optical Fiber Cleaving Tool

131165229
45-223: RNCC: 3 | RNVC: 2

29 Apr 1997

5110-13-109-0127
Assembl Handle File

131090127
3052001515: RNCC: 3 | RNVC: 2
OREA44: RNCC: 5 | RNVC: 2

1 Apr 1975

5110-66-153-9570
Hand Reamer

661539570
UCT 050072: RNCC: 3 | RNVC: 2

3 Jan 2006

5110-99-607-9115

5110-99-466-5541

5110-15-134-4430
Lama Legno Denti Gr

151344430
40108: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-99-607-1859

5110-15-208-4511
Alesatori Di Precis

152084511
3AAEFCFRDP7: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-906-2631
Bearing Scraper

219062631
C 5755 101 E: RNCC: 3 | RNVC: 2

29 Oct 1991

5110-15-183-1903
Pinza A Becchi Pieg

151831903
010340017: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-165-4263
Telaio Universale P

151654263
1588977: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-572-9010
Hand Operated Wire Rope Cutter

145729010
997A.20: RNCC: 3 | RNVC: 2

24 Aug 2012

5110-15-230-6978
Utensile Per Prefil

152306978
A40023248: RNCC: 3 | RNVC: 2
511015E131129: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-21-840-9647
Knockout Punch And Die

218409647
730: RNCC: 3 | RNVC: 1
GGGP836: RNCC: 4 | RNVC: 1

26 Oct 1965

5110-21-637-5289
Hand Reamer

216375289
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
TMEX3BE: RNCC: 3 | RNVC: 2
50-10940: RNCC: 3 | RNVC: 2
GGGR180: RNCC: 4 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1
1612: RNCC: 5 | RNVC: 1
4500-1-2: RNCC: 5 | RNVC: 2

25 May 1968

5110-12-121-3216
Pinking Shears

121213216
84: RNCC: 3 | RNVC: 2
40413-220: RNCC: 3 | RNVC: 2
686Z7-1-2IN: RNCC: 5 | RNVC: 2
5141: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-910-4207
Hand Cold Chisel

999104207
4025: RNCC: 3 | RNVC: 2
BS3066-TABLE 3: RNCC: 4 | RNVC: 1
FA11264: RNCC: 6 | RNVC: 9
FA11253: RNCC: 6 | RNVC: 9
910-4207: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-370-8403
Hand Metal Stamping Die Set

143708403
NO PRIMARY REF14-370-8403: RNCC: 3 | RNVC: 2
130535: RNCC: 5 | RNVC: 2
C0P415-6: RNCC: 5 | RNVC: 9

5 Jun 1981

5110-21-876-0446
Ice Chisel

218760446
5110-1920: RNCC: 3 | RNVC: 2

5 Jul 1977

5110-66-149-7494
Hand File

661497494
NO PRIMARY REF 66-149-7494: RNCC: 3 | RNVC: 2
07071906: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-15-192-0855
Chiave Snodata A Ca

151920855
D173: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-14-428-2569
Craftsman's Knife

144282569
840.1: RNCC: 3 | RNVC: 2
840-1: RNCC: 5 | RNVC: 2
3148512069218: RNCC: 5 | RNVC: 2
1101043Q00: RNCC: 5 | RNVC: 2
91626668: RNCC: 5 | RNVC: 2
162-2241: RNCC: 5 | RNVC: 2
0206921: RNCC: 5 | RNVC: 9
FACOM840.1: RNCC: 5 | RNVC: 9

8 Dec 1988

5110-15-185-8993
Assortimento A File

151858993
1599510: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-158-1642
Matrici In Durallum

151581642
MATRICI IN DURALLUMINIO: RNCC: 2 | RNVC: 2

18 Dec 2003

5110-15-165-3860
Serie Scalpelli Fal

151653860
10032830: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-136-2542
Sega A Ferro

151362542
2570-3: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-244-0647

5110-15-136-3853
Cesoie

151363853
203D260: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-25-139-2907
Hand Cable Stripper

251392907
9801.32B: RNCC: 3 | RNVC: 2

14 Jan 1991

5110-15-208-4915
Alesatore

152084915
3AARFCFMDQ23: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-215-4022
Inserto Esagonale

152154022
390CE004: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-720-5978
Wire Wrapping Tool

5110-21-109-4778

5110-12-376-7594
Knife Blade

123767594
2210.113.000: RNCC: 3 | RNVC: 2

4 Nov 2008

5110-99-910-7791

5110-15-230-4558
Spazzola In Filo Ac

152304558
D2690: RNCC: 3 | RNVC: 2
511015E158206: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-99-910-5150
Paring Gouge

5110-99-910-5115

5110-15-209-0899
Tronchese A Taglien

152090899
E 158: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-27-014-8931
Hand Reamer

270148931
3455ATF16416: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-22-618-3684
Tube Cutter

226183684
11276053: RNCC: 3 | RNVC: 2

4 Dec 2008

5110-14-244-0670

5110-14-259-3858

5110-66-145-1325
Hand Operated Cable Cutter

661451325
663-724: RNCC: 3 | RNVC: 2

8 Jul 1999

5110-15-184-7323
Ferri Semplici A De

151847323
3IANDTSE40: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-123-7196
Tronchese A Taglien

151237196
1082IN-160: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-25-120-9626
Steel Edge Sharpene

251209626
T100 SWIX PIST STEEL EDGE SHARPE: RNCC: 3 | RNVC: 2
4: RNCC: 6 | RNVC: 9

18 Jan 1990

5110-15-216-0381
Tagliatubi In Lega

152160381
317: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-137-6805

5110-26-301-1995
Hand Cable Stripper

263011995
P156: RNCC: 3 | RNVC: 2

26 Jun 2013

5110-12-340-8868
Hand Cold Chisel

123408868
7140002: RNCC: 3 | RNVC: 2
01555015021: RNCC: 3 | RNVC: 2

28 Jun 1996

5110-27-047-0171
Maket Bicagi Uc

270470171
10.LU: RNCC: 2 | RNVC: 1

27 Oct 2009

5110-15-158-7282
Enclosed Blade Tube Deburring Tool

151587282
IGTBA32/48: RNCC: 3 | RNVC: 2
(241)AE164IGTBA32/48: RNCC: 5 | RNVC: 2

30 Mar 2004

5110-99-197-7940
Hand Cold Chisel

991977940
233B: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-15-221-4723
Sega

152214723
EX5110RI7422252: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-37-517-5240
Chouin Ard Pio Tool

375175240
511000AF20428: RNCC: 5 | RNVC: 2

12 Jun 2009

5110-12-126-1668

5110-66-130-3682
Hand File

661303682
FA623T: RNCC: 3 | RNVC: 2
1-102-06-2-0: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

24 Mar 1988

5110-21-807-1050
Pipe Cutter

218071050
2B: RNCC: 3 | RNVC: 2
102: RNCC: 3 | RNVC: 2

5 Feb 1964

5110-22-303-5251

5110-25-101-9367

5110-99-440-4333
Engraving Cutter

994404333
C21445: RNCC: 3 | RNVC: 2
W4WDTL110-860: RNCC: 6 | RNVC: 9

1 Mar 1977

5110-99-782-2103
Bearing Scraper

997822103
96A: RNCC: 3 | RNVC: 2
H02211: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-15-165-4027
Raspa Mezza Tonda S

151654027
267128: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-123-7178
Tronchese A Doppia

151237178
1860-210: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-368-9116
Bearing Scraper

123689116
461 100 0: RNCC: 3 | RNVC: 2
02.19.76.54: RNCC: 5 | RNVC: 2

5 May 2006

5110-15-230-8212
Punta A Tracciare

152308212
974: RNCC: 3 | RNVC: 2
511015E113562: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-98-205-4761
Hand Reamer

982054761
DFAMPD00207 K: RNCC: 2 | RNVC: 2

12 Oct 2000

5110-15-209-0896
Tronchese A Taglien

152090896
E 81: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-812-3689

5110-15-137-8366
Lama Per Archetto

151378366
2796/2X24: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-99-428-9644
Hand Reamer

994289644
BS122: RNCC: 4 | RNVC: 1
F1FA16338: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-22-100-0658

5110-22-100-0090

5110-12-326-8953
Diagonal Cutting Pliers

6 Nov 1991

5110-25-101-9343
Single Bow Cutting Punch

251019343
18MMDIA: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-12-126-3061
Hand Wire Stripper

121263061
NO PRIMARY REF 12-126-3061: RNCC: 3 | RNVC: 2
1221180: RNCC: 5 | RNVC: 9
107224: RNCC: 5 | RNVC: 9
1072247: RNCC: 5 | RNVC: 9
3418B: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-152-2166
Knife Blade

661522166
NO PRIMARY REF 66-152-2166: RNCC: 3 | RNVC: 2
46613700: RNCC: 5 | RNVC: 2

18 Jun 2004

5110-15-184-8037
Forbici

151848037
4FSACN235: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-190-3677
Sgorbia

151903677
4QMZM8: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-27-047-2700
Kombine Pense Seti

270472700
8220 00 6010: RNCC: 2 | RNVC: 1

17 Nov 2009

5110-66-013-9868
Hand Reamer

660139868
HANDREAMER: RNCC: 3 | RNVC: 1
HAND REAMER: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-15-215-9527
Ricambio Lama Fissa

152159527
148112: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-190-0129
Punzone Da 5 Mm

151900129
000300050: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-208-4770
Alesatore Cilindric

152084770
3AAWFCFRDP14-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-845-2717
Folding Knife

218452717
KN2/1: RNCC: 3 | RNVC: 2
DP43B: RNCC: 5 | RNVC: 9

19 Dec 1966

5110-14-273-7504

5110-27-039-8278
Hand Operated Cable Cutter

270398278
KM-45: RNCC: 2 | RNVC: 1

24 Dec 2007

5110-23-111-0968
Hand Reamer

231110968
953513: RNCC: 3 | RNVC: 2

12 Nov 1990

5110-14-210-7191

5110-25-102-1257

5110-99-510-9983
Hand Cable Stripper

995109983
NO PRIMARY REF 99-510-9983: RNCC: 3 | RNVC: 2
390L40-S1: RNCC: 5 | RNVC: 2

2 Aug 2011

5110-15-184-7080
Accetta

151847080
3580-0700: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-12-362-3559
Craftsman's Knife

123623559
T0965: RNCC: 3 | RNVC: 2

11 Feb 2004

5110-14-411-8599
Lames Cisaille Jeu

144118599
884.L65: RNCC: 3 | RNVC: 2
3148512103202: RNCC: 5 | RNVC: 2
884L65: RNCC: 5 | RNVC: 2
0210320: RNCC: 5 | RNVC: 9

10 Sep 1986

Load More Results