What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 74 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 74of 112

5110-14-226-7434
Hand Masonry Drill

142267434
NO PRIMARY REF14-226-7434: RNCC: 3 | RNVC: 2
566-19: RNCC: 5 | RNVC: 9

1 Jan 1966

5110-13-102-8918
Hand Reamer

131028918
NBN485H8-15-5CS: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-66-150-3297
Diagonal Cutting Pliers

661503297
NO PRIMARY REF 66-150-3297: RNCC: 3 | RNVC: 2
07589100: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-21-892-1498
Glass Cutting Wheel

218921498
A3-01-124: RNCC: 3 | RNVC: 2

21 Jan 1983

5110-12-317-8969
Tailor's Shears

123178969
DIN32612-290: RNCC: 2 | RNVC: 2
1104-29: RNCC: 3 | RNVC: 2

23 May 1989

5110-99-731-8438
Reamerline

997318438
R6Y206/43: RNCC: 3 | RNVC: 2
26DL-96103: RNCC: 6 | RNVC: 9

20 Jun 2002

5110-15-196-9204
Single Bow Cutting Punch

151969204
PN UAS 00013762: RNCC: 3 | RNVC: 2
5110F76025952: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-66-013-2376
Hand Masonry Drill

660132376
2306: RNCC: 3 | RNVC: 1
0713 5703: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-15-235-9513
Spazzola Metallica

152359513
77090010: RNCC: 3 | RNVC: 2
511015E143817: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-208-4540
Alesatore

152084540
3AARPERMDQ14-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-136-1149
Spessi Etro 13 Lame

151361149
4730-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-213-6520
Scalpello Per Faleg

152136520
3-16-539: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-358-2786
Hand File

123582786
0 400 602: RNCC: 3 | RNVC: 2
400 602: RNCC: 5 | RNVC: 2

7 Oct 2002

5110-21-893-1385
Hand File Set

218931385
2: RNCC: 3 | RNVC: 1
FF1919V: RNCC: 3 | RNVC: 2

13 Aug 1983

5110-27-000-8049
Single Bow Cutting Punch

270008049
5700 24 0010: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-22-607-3417
Hand File

226073417
0352.0168.6144: RNCC: 3 | RNVC: 2

9 Jun 2004

5110-15-215-3993
Pinza A Becchi Piat

152153993
23500130: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-215-4020
Inserto A Croce

152154020
390CPH06: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-222-2077
Straight Tri Shears

222222077
342105: RNCC: 3 | RNVC: 2

8 Aug 1973

5110-12-184-8605
Bolt Cutter

121848605
2756-800: RNCC: 3 | RNVC: 9

23 Aug 1980

5110-15-176-2360
Serie Sgorbie

151762360
EX5110RI5203066: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-66-093-8572
Bolt Cutter

660938572
30KC: RNCC: 3 | RNVC: 2
DEF(AUST)5810: RNCC: 4 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

22 Dec 1978

5110-15-136-1296
Archetti

151361296
2755: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-218-2846
Spazzola Acciaio Ta

152182846
T120MA14: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-214-6626
Forbice

152146626
CDT1: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-176-8368
Hand Reamer

121768368
DIN206-B30-HSS: RNCC: 2 | RNVC: 2
301-FORM B-30: RNCC: 3 | RNVC: 2
F1131-30: RNCC: 3 | RNVC: 2
7586C30: RNCC: 5 | RNVC: 9
536C30: RNCC: 5 | RNVC: 9
B30DIN206HSS: RNCC: 5 | RNVC: 9
13010-30: RNCC: 5 | RNVC: 9

20 Dec 1978

5110-21-639-4624
Hand File

216394624
907851: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1
5110-0446: RNCC: 5 | RNVC: 9

26 Jan 1966

5110-12-126-2116
Straight Trimmers Shears

121262116
D864: RNCC: 3 | RNVC: 2
1262/C-22: RNCC: 3 | RNVC: 2
99-220: RNCC: 3 | RNVC: 2
00.20.24.84: RNCC: 5 | RNVC: 2
0808391082349: RNCC: 5 | RNVC: 9
99-250: RNCC: 5 | RNVC: 9
1391246209230011: RNCC: 5 | RNVC: 9
99-250: RNCC: 5 | RNVC: 9

30 May 1969

5110-13-102-8936
Hand Reamer

131028936
D0C98-8: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-15-219-4651
Filiera Tonda Din 2

152194651
165T615-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-039-2130
Valve Seat Cutter

660392130
144512: RNCC: 3 | RNVC: 2

23 Apr 1971

5110-14-424-1035
Exposed Blade Tube Deburring Tool

144241035
10-100: RNCC: 3 | RNVC: 2

12 May 1988

5110-99-150-7488
Reamer

5110-15-208-2671
Alesatore

152082671
3AAWFCCNFQ28-8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-137-9549
Cesoia Tagliacavi C

151379549
1132170: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-14-336-2630
Scie A Meta Monture

5110-14-244-3668

5110-15-124-1209
Lama Sega Circolare

151241209
7938: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-12-146-5155

5110-14-400-6877
Tube Decoupe Joint

144006877
DEC0UPE J0INT LISSE 48MM: RNCC: 3 | RNVC: 2

8 May 1985

5110-12-010-5195

5110-21-639-6056
Compass Saw Blade

216396056
D-4B: RNCC: 3 | RNVC: 1
18: RNCC: 5 | RNVC: 1
D-4B: RNCC: 5 | RNVC: 2
4: RNCC: 5 | RNVC: 2
247: RNCC: 5 | RNVC: 2

6 Jun 1968

5110-15-210-8489
Cutter Standard Per

152108489
P-450: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-910-9963
Hand Reamer

999109963
BS122 PART 2: RNCC: 4 | RNVC: 1
10121: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16218: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-369-8309
Hand Metal Cutting Shears

123698309
D29BSS-2: RNCC: 3 | RNVC: 2
00.19.53.13: RNCC: 5 | RNVC: 2

21 Aug 2006

5110-12-350-3204
Hand Reamer

123503204
104/A: RNCC: 3 | RNVC: 2

15 Mar 2000

5110-99-942-0156
Hand Reamer

999420156
BS122 PART 2: RNCC: 4 | RNVC: 1
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16348: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-366-6580
Tube Cutter

123666580
08023509004: RNCC: 3 | RNVC: 2
760090: RNCC: 5 | RNVC: 2
08.02350-9004: RNCC: 5 | RNVC: 2

19 May 2005

5110-21-639-6130
Bow Saw

216396130
282: RNCC: 3 | RNVC: 1
5110-1020: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-22-601-3456
End Cutting Nippers

226013456
2223D-150: RNCC: 3 | RNVC: 2

25 Sep 2002

5110-27-045-2352
Hand File

270452352
J56-206H: RNCC: 2 | RNVC: 1

17 Apr 2009

5110-98-201-4213
Scrub Clear Slasher

982014213
SLASHER: RNCC: 3 | RNVC: 2
SLASHER: RNCC: 5 | RNVC: 9

19 Oct 1987

5110-14-242-9336
Hand Masonry Drill

142429336
2402M10: RNCC: 3 | RNVC: 2
10B: RNCC: 3 | RNVC: 2
M10: RNCC: 3 | RNVC: 2
4492M10: RNCC: 3 | RNVC: 9

1 Jan 1967

5110-14-244-0687

5110-22-126-7084
Buskryder

221267084
235R: RNCC: 3 | RNVC: 2

21 Feb 2001

5110-14-244-3720

5110-13-102-8709
Ship Scraper

131028709
6696: RNCC: 3 | RNVC: 9
2616: RNCC: 5 | RNVC: 9

1 Apr 1975

5110-21-883-1748
Riffler

218831748
STYLE12: RNCC: 3 | RNVC: 1
941126: RNCC: 5 | RNVC: 2

27 Jan 1981

5110-26-301-1991
Diagonal Cutting Pliers

263011991
P038: RNCC: 3 | RNVC: 2

26 Jun 2013

5110-13-108-2071
Jeweler's Broach Set

131082071
1962-28T080: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-15-208-4838
Alesatore

152084838
3AAXFCFRDP16: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-122-6472

5110-25-122-8491

5110-21-806-0605
Revolving Head Cutting Punch

218060605
186-8IN: RNCC: 3 | RNVC: 2

5 Feb 1964

5110-12-131-6457

5110-15-190-3124
Sponderuola

151903124
5QLESE14: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-21-639-4206
Hand File

216394206
39GP30: RNCC: 4 | RNVC: 1
REVB: RNCC: 6 | RNVC: 9

1 Feb 1965

5110-22-309-2993
Pocket Folding Multi-Tool

223092993
SUPER TOOL 200: RNCC: 3 | RNVC: 2

3 May 2002

5110-14-518-2672
Diagonal Cutting Pliers

145182672
407-8MT: RNCC: 3 | RNVC: 2

1 Feb 2000

5110-98-106-8015
Tread Strip Die

981068015
DIE TREAD STRIP: RNCC: 3 | RNVC: 2

10 Sep 1981

5110-15-221-2994
Tagliatubi Alupex

152212994
TAG: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-244-0784

5110-21-639-4886
Hand File

216394886
39GP53: RNCC: 4 | RNVC: 1
5.5RHNRO: RNCC: 5 | RNVC: 2
37416: RNCC: 5 | RNVC: 2

2 Sep 1964

5110-21-639-6476
Bearing Scraper Set

216396476
2: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-136-2919
Scalpelli In Serie

151362919
6056-9: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-14-547-8123
Exposed Blade Tube Deburring Tool

145478123
D9851M0606: RNCC: 3 | RNVC: 2
D9851M0606: RNCC: 5 | RNVC: 9

16 Nov 2005

5110-27-024-7380
Hand File

270247380
200X22X5: RNCC: 2 | RNVC: 1

27 Nov 2004

5110-15-215-0699
Cutter

152150699
5280/8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-217-6280
Punzoni

152176280
GERMANY 4: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-888-3976
Hand Metal Cutting Punch And Die

218883976
2: RNCC: 3 | RNVC: 2

21 Mar 1982

5110-99-264-0505
Knife Blade

992640505
10504244: RNCC: 3 | RNVC: 2
5 706915 042443: RNCC: 5 | RNVC: 2

18 May 2005

5110-15-218-3266
Pinzetta Di Precisi

152183266
7/01504: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-196-6168
Hand Operated Cable Cutter

121966168
53338010: RNCC: 3 | RNVC: 2
9506230: RNCC: 3 | RNVC: 2
4003773006305: RNCC: 5 | RNVC: 2
53 338010: RNCC: 5 | RNVC: 9

25 Jul 1983

5110-15-185-5837
Sega 300Mm Ausonia

151855837
SEGA300MM: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-190-9002
Matrice Esagonale

151909002
9782: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-13-103-0049
Framing Chisel

131030049
B336-8: RNCC: 3 | RNVC: 9

1 Apr 1975

5110-21-637-5745
Hand Reamer

216375745
B94-2: RNCC: 3 | RNVC: 1
50-11154: RNCC: 3 | RNVC: 2
B174-2: RNCC: 4 | RNVC: 1
B5-14: RNCC: 5 | RNVC: 1

4 Jun 1968

5110-14-264-0417
Hand Metal Cutting Shears

142640417
122-1-22: RNCC: 3 | RNVC: 2
438-22LA: RNCC: 3 | RNVC: 2
3906-22: RNCC: 3 | RNVC: 9
560LI0N1-220: RNCC: 5 | RNVC: 2
13-55-220: RNCC: 5 | RNVC: 2
336-04-22: RNCC: 5 | RNVC: 9
560-1-22: RNCC: 5 | RNVC: 9

1 Jan 1970

5110-66-147-6886
Hand Operated Cable Cutter

661476886
FEL-C7: RNCC: 3 | RNVC: 2
0756 4112: RNCC: 5 | RNVC: 2

27 Nov 2001

5110-66-149-8110
Bolt Cutter

661498110
NO PRIMARY REF 66-149-8110: RNCC: 3 | RNVC: 2
00029954: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-15-143-5482
Chiave

151435482
RT601S4200: RNCC: 3 | RNVC: 2
RT601S4200: RNCC: 3 | RNVC: 2
RT601S4200: RNCC: 5 | RNVC: 9

11 Dec 1996

5110-14-271-6963

5110-22-618-1643
Tube Cutter

226181643
0005.01: RNCC: 3 | RNVC: 2

28 Oct 2008

5110-12-121-5868
Hand Metal Cutting Shears

121215868
NO PRIMARY REF 12-121-5868: RNCC: 3 | RNVC: 2
4764: RNCC: 5 | RNVC: 9

30 May 1969

5110-19-003-7327
Hand Hacksaw Frame

190037327
130.51.005.0: RNCC: 3 | RNVC: 2
93010 (H): RNCC: 3 | RNVC: 2
403 8-12IN: RNCC: 5 | RNVC: 2

30 Mar 2010

5110-12-002-1491

5110-99-562-8587
Hand Hacksaw Frame

995628587
HSG325: RNCC: 3 | RNVC: 2
12400028484: RNCC: 5 | RNVC: 2

5 Oct 2011

5110-22-609-7426
Hand File

226097426
0714.61.04: RNCC: 3 | RNVC: 2

23 Feb 2005

5110-15-191-6435
Mascherina Ottone C

151916435
MASCHERINA58X42X0,6: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-15-195-2413
Hand Metal Cutting Shears

151952413
011020020: RNCC: 3 | RNVC: 2

8 Mar 2011

5110-12-324-7584
Compass Saw Blade

123247584
147-7: RNCC: 3 | RNVC: 2
1490007: RNCC: 5 | RNVC: 2

21 Mar 1991

5110-15-172-4229
Punta A Tracciare U

151724229
PUNTA A TRACCIARE USAG MODELLO 9: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-99-137-0975
Hand Wire Stripper

991370975
H35-7: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-17-111-7774
Hand File Set

171117774
KSSG 91-4,0: RNCC: 3 | RNVC: 2

15 Apr 1998

5110-14-573-0434
Knife Blade

145730434
844.TTL10: RNCC: 3 | RNVC: 2
3148517705661: RNCC: 5 | RNVC: 2
770566: RNCC: 5 | RNVC: 2

6 Sep 2012

5110-15-208-5351
Tronchese

152085351
3TANCNCELIN160: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-4084
Coltello Multiuso

151654084
221A: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-189-9048
Tronchesi Inox Tagl

151899048
158-5748: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-99-131-3918
Piston Spanner

991313918
MC1276060: RNCC: 3 | RNVC: 2

16 May 2002

5110-13-111-4040
Hand Operated Glass Cutting Machine

131114040
NO PRIMARY REF 13-111-4040: RNCC: 3 | RNVC: 2
2110L0043-220X120CM: RNCC: 5 | RNVC: 2

13 Nov 1980

5110-15-183-4813
Lama Per Sega A Man

151834813
C0MM631003020089: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-99-911-0000
Hand Reamer

999110000
BS122PT2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-206-1406
Ru Removal Tool Kit

992061406
S1021-5: RNCC: 3 | RNVC: 2
3A4524: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-199-0742
Double Bow Cutting Punch

151990742
3703-8: RNCC: 3 | RNVC: 2
C3703-8: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-233-0751
Coltello

152330751
0-10-499: RNCC: 3 | RNVC: 2
511015E061783: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-99-910-9954
Hand Reamer

999109954
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16209: RNCC: 6 | RNVC: 9
10112: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-124-0722
Tronchese

151240722
1815/5-180: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-98-107-0858
Musical Reed Cutter

981070858
SELMAR-BARITONE SAXOPHONE CUTTER: RNCC: 3 | RNVC: 2

4 Aug 1982

5110-27-010-6565
Hand File

270106565
99999-NIIN-DA0037294: RNCC: 2 | RNVC: 1

21 Jun 2002

5110-99-803-0106

5110-99-556-2519

5110-21-637-4382
Adjustable Re Pilot

216374382
1A: RNCC: 3 | RNVC: 2
H 4/P: RNCC: 3 | RNVC: 2
4: RNCC: 5 | RNVC: 2

30 Nov 1965

5110-15-165-3965
Ricambio Coltello P

151653965
161B: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-230-4261
Funi E Cavi Cesoia

152304261
1896/2: RNCC: 3 | RNVC: 2
511015E095423: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-15-209-8033
Lama

152098033
F7545TCT: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-129-7908
Hand Reamer Set

661297908
ST1864L-40KT: RNCC: 3 | RNVC: 2

8 Sep 2000

5110-14-332-8397
Straight Trimmers Shears

143328397
683-7: RNCC: 3 | RNVC: 2

2 Jul 1975

5110-15-136-2477
Cacciaspine

151362477
3623-3-4: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-66-013-5572
Hand File

660135572
WARDING 8 IN: RNCC: 3 | RNVC: 1
07087000: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-21-849-9317
Scraping Knife

218499317
S4F: RNCC: 3 | RNVC: 2
4214: RNCC: 3 | RNVC: 2
D303TYPE1: RNCC: 4 | RNVC: 1
5110-0854: RNCC: 5 | RNVC: 9
5110P4S: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-98-108-3501
Woodworking Butt Chisel

981083501
M383-82: RNCC: 3 | RNVC: 2

22 Aug 1985

5110-12-126-2784
Ratchet Bit Brace

121262784
NO PRIMARY REF 12-126-2784: RNCC: 3 | RNVC: 2
577C011: RNCC: 5 | RNVC: 9

30 May 1969

5110-66-150-2350
Scraping Knife

661502350
NO PRIMARY REF 66-150-2350: RNCC: 3 | RNVC: 2
07194401: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-143-0916
Cacciaspine Esagon.

151430916
02707268: RNCC: 3 | RNVC: 2

13 Nov 1996

5110-15-165-3775
Ugnetto

151653775
364001: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-22-626-0182
Hand Hacksaw Blade

226260182
3906-250-32: RNCC: 3 | RNVC: 2

25 Oct 2013

5110-15-209-7068
Spatola Manicata Mm

152097068
ART.4896(MM40): RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-209-7060
Scalpello Manico Le

152097060
ART.90(MM18): RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-131-6368
Hand Reamer

991316368
A05470AAR: RNCC: 3 | RNVC: 2
1MEVDTK: RNCC: 6 | RNVC: 9

1 Apr 2003

5110-15-165-3901
Barretta Per Inciso

151653901
9504225: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-208-2610
Scalpello

152082610
3SAGMMCNZ150X22: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-235-9483
Pinza Universale Mm

152359483
65016160: RNCC: 3 | RNVC: 2
511015E142396: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-25-125-0411

5110-15-208-4835
Alesatore

152084835
3AAXFCFRDP13: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-876-0445
Ice Chisel

218760445
5110-1919: RNCC: 3 | RNVC: 2

5 Jul 1977

5110-15-141-1982
Fissatrice Sparapun

151411982
ROCAMA-16: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-99-910-5170
Auger Handle

999105170
A3-9807-2: RNCC: 3 | RNVC: 2
A3-9807: RNCC: 5 | RNVC: 1
FA14328: RNCC: 6 | RNVC: 9
1B5241: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-230-0216
Lima Piatta

152300216
6-1/2D-P: RNCC: 3 | RNVC: 2
511015E123592: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-99-136-1401

5110-25-103-5056

5110-12-343-7250
Hand Metal Cutting Shears

123437250
13135: RNCC: 3 | RNVC: 2
75270001: RNCC: 5 | RNVC: 2

17 Jul 1997

5110-25-103-5103

5110-21-639-5060
Turning Chisel

216395060
476: RNCC: 3 | RNVC: 1
476: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-15-147-9651
Adz

151479651
60155418: RNCC: 3 | RNVC: 2

26 May 1998

5110-27-018-7900
Hand File

270187900
09013KE1020: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-27-019-5770
Hand File

270195770
07002YE0132: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-27-019-4351
Hand File

270194351
10091KEGE0014: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-27-043-9546
Hand Operated Glass Cutting Machine

270439546
HASAL 310: RNCC: 2 | RNVC: 1

24 Dec 2008

5110-15-207-4846
Hand Cable Stripper

152074846
SPC: RNCC: 3 | RNVC: 2
(241)AA045SPC: RNCC: 5 | RNVC: 2

17 Oct 2012

5110-14-254-3208
End Cutting Nippers

142543208
2833: RNCC: 3 | RNVC: 2

1 Jan 1969

5110-27-014-9014
Single Bow Cutting Punch

270149014
5110ATFD0126: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-14-488-5528
Hand Metal Cutting Shears

144885528
880: RNCC: 3 | RNVC: 2
880: RNCC: 5 | RNVC: 2
0210090: RNCC: 5 | RNVC: 2
3148512100904: RNCC: 5 | RNVC: 2
0714 03 15: RNCC: 5 | RNVC: 2

21 May 1997

5110-15-165-4110
Leva Con Attacco Qu

151654110
245401: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-17-117-9989
Bordscha Messenset

171179989
732058: RNCC: 3 | RNVC: 2

19 Oct 2005

5110-12-151-3216
Ven Schneideinsatz

121513216
200-67: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-214-6617
Sega Per Cornici

152146617
EXRI3109070: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-165-4008
Triangolo Per Seghe

151654008
2380G: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-221-4900
Cesoia

152214900
EX5110RN0401403: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-17-701-5405
End Cutting Nippers

177015405
NO PRIMARY REF 17-701-5405: RNCC: 3 | RNVC: 2
525-5: RNCC: 6 | RNVC: 9
522-5 1-2: RNCC: 6 | RNVC: 9
522-5-1-2: RNCC: 6 | RNVC: 9
4-5 1-2: RNCC: 6 | RNVC: 9

15 May 1970

5110-15-124-0354
Lama Di Ricambio

151240354
5487: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-14-391-6459
Hand Operated Wire Rope Cutter

143916459
996A3: RNCC: 3 | RNVC: 2
996-3: RNCC: 5 | RNVC: 2

21 Mar 1984

5110-15-215-6238
Taglierina Supporto

152156238
78508385: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-244-0697

5110-14-330-2079

5110-14-257-7566

5110-15-137-9268
Tagliatubi Per Rame

151379268
0332001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-165-4064
Lame Per Seghetto

151654064
E02438: RNCC: 3 | RNVC: 2
E02438: RNCC: 5 | RNVC: 9

1 Nov 2002

5110-66-109-0266
Co Refacing Outfit

661090266
AEW5951-2: RNCC: 3 | RNVC: 2

25 Jan 1981

5110-22-610-5049
Circle Cutter

226105049
4.328.903.922: RNCC: 3 | RNVC: 2

27 May 2005

5110-14-376-6303
Electricians' Scissors

143766303
NO PRIMARY REF14-376-6303: RNCC: 3 | RNVC: 2
2816-4: RNCC: 5 | RNVC: 9

28 Apr 1982

5110-12-140-3308
Hand Wire Stripper

121403308
79BSC: RNCC: 3 | RNVC: 2
100686: RNCC: 3 | RNVC: 2
8098-160C: RNCC: 3 | RNVC: 2
187160: RNCC: 5 | RNVC: 9
4400CPI: RNCC: 5 | RNVC: 9
1144: RNCC: 5 | RNVC: 9
2169ETI: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-122-2511
Hand Reamer

121222511
513A203HSS15-64: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-208-4587
Alesatore Conico Pe

152084587
3AAXFPFMBQ1-1X1-8: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-256-8862

5110-14-201-3807
Rigid Handle Machete

142013807
0RT3-310: RNCC: 3 | RNVC: 2
0RT3-310: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-21-008-4115
Tube Cutter

210084115
412: RNCC: 3 | RNVC: 1

30 Nov 1965

5110-15-208-3824
Alesatore

152083824
3AARFCFRDP17-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-055-8053
Handwerk Mes Bladen

170558053
1992 5: RNCC: 3 | RNVC: 2
STANLEY 1992 5: RNCC: 5 | RNVC: 2

25 Feb 1985

5110-15-208-5331
Pettine Filettare M

152085331
4PESDC3X0-50: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-456-2156
Heavy Pocket Saw

994562156
COMMANDOSAW: RNCC: 3 | RNVC: 2
24846: RNCC: 5 | RNVC: 2
020: RNCC: 5 | RNVC: 2
CM020: RNCC: 5 | RNVC: 2
F020: RNCC: 5 | RNVC: 2
M020: RNCC: 5 | RNVC: 2
COMMANDO SAW: RNCC: 6 | RNVC: 9
F1FA16683: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-120-0898
Hole Cutt Tommy Bar

991200898
H5712: RNCC: 2 | RNVC: 2
H5712: RNCC: 6 | RNVC: 9
FA11551: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-182-9680
Tagliapiastrelle

151829680
43P: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-98-205-4186
Hand Cold Chisel

982054186
DFAMPD00094: RNCC: 2 | RNVC: 2

14 Aug 2000

5110-15-165-3807
Lima Per Meccanica

151653807
2561110: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-13-118-7069
Knife Blade

131187069
BR1010: RNCC: 3 | RNVC: 2

16 Jul 2003

5110-15-165-3711
Punta Per Tracciare

151653711
4810250: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-180-6994
Pinza Multifunzione

151806994
1028548: RNCC: 3 | RNVC: 2
(241)A39601028548: RNCC: 5 | RNVC: 2

4 Jul 2008

5110-26-301-1987
Hand Cable Stripper

263011987
PV156: RNCC: 3 | RNVC: 2

26 Jun 2013

5110-99-269-3783
Paper Cutter

992693783
T1250: RNCC: 3 | RNVC: 2

4 Jan 2012

5110-14-244-0773

5110-12-393-7791
Rip Hand Saw

123937791
256-26: RNCC: 3 | RNVC: 2
7311518000080: RNCC: 5 | RNVC: 2

10 Oct 2013

5110-27-014-8947
Hand Reamer

270148947
3455ATF16453: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-33-156-6051
Hand Metal Cutting Shears

331566051
911.019: RNCC: 3 | RNVC: 2

23 Feb 1994

5110-25-116-5234
Hand Reamer

251165234
11753-0: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-99-910-4186

5110-99-910-4171

5110-99-910-5931
Hand Metal Cutting Shears

999105931
H2348: RNCC: 2 | RNVC: 2
FA16888: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-061-7737
Chain Saw Filing Guide

150617737
8610500: RNCC: 3 | RNVC: 2

7 Sep 1982

5110-27-011-7687
Hand Reamer

270117687
09013KR1014: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-204-6824
Diagonal Cutting Pliers

152046824
B18130160: RNCC: 3 | RNVC: 2
(241)A0302B18130160: RNCC: 5 | RNVC: 2

9 Dec 2011

5110-15-165-3784
Cacciaspine

151653784
361662: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-144-1215

5110-15-213-9093
Rullo In Ferro

152139093
RULLO: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-889-5306
Coaxial Cabl Cutter

218895306
TD487G1: RNCC: 3 | RNVC: 2

9 May 1982

5110-21-102-3175
Expansion Rea Pilot

211023175
MBB: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-14-543-5311
Hand Optical Fiber Cleaving Tool

145435311
974-146130-00: RNCC: 3 | RNVC: 2

18 Nov 2004

5110-27-040-1809
Hand File

270401809
4" BICAK: RNCC: 2 | RNVC: 1

10 Jan 2008

5110-66-013-7580
Hand Reamer

660137580
650 4682: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-14-244-0869

5110-15-211-7942
Spanderruola Mod. 7

152117942
M0D78: RNCC: 5 | RNVC: 3
M0D78: RNCC: 5 | RNVC: 9

16 Nov 2005

5110-98-204-6066
Pocket Knife

982046066
S31: RNCC: 3 | RNVC: 2

3 Jul 1996

5110-15-222-0555
Set Pulitori Mozzi

152220555
46611140: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-214-9591
Spatula

152149591
SPATOLA5CM: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-194-9144
Hand Metal Stamping Die

121949144
510022: RNCC: 2 | RNVC: 9

16 Dec 1982

5110-21-859-0402
Hand File

218590402
39GP53: RNCC: 4 | RNVC: 1

14 May 1970

5110-21-639-5028
Floor Chisel

216395028
950: RNCC: 3 | RNVC: 1
950: RNCC: 3 | RNVC: 1
12310: RNCC: 3 | RNVC: 2
23601: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-15-221-9535
Raschietto 200 Mm.

152219535
2914G: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-27-059-9893
Hand Optical Fiber Stripper

270599893
1630135: RNCC: 2 | RNVC: 1

20 Dec 2013

5110-14-439-7984
End Cutting Nippers

144397984
491.16EL: RNCC: 3 | RNVC: 2
3148511797501: RNCC: 5 | RNVC: 2
91453930: RNCC: 5 | RNVC: 2
0715 02 02: RNCC: 5 | RNVC: 2
0179750: RNCC: 5 | RNVC: 9

23 May 1990

5110-99-910-4232
Firmer Chisel

999104232
BS1943: RNCC: 4 | RNVC: 1
FA11303: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-5694
Hand Rasp

999105694
BS498: RNCC: 4 | RNVC: 1
FA16115: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-25-102-7242
Bolt Cutter

251027242
1SBF5110HVK5: RNCC: 2 | RNVC: 1

1 Jan 1984

5110-21-639-6287

5110-21-639-6296

5110-14-206-8211
Revolving Head Cutting Punch

142068211
8020030001: RNCC: 3 | RNVC: 2
4640: RNCC: 3 | RNVC: 9
SYB0273: RNCC: 5 | RNVC: 2

1 Jan 1964

5110-99-622-4938
Oscillato Extractor

996224938
SDB213998: RNCC: 3 | RNVC: 2
39001-586-10: RNCC: 5 | RNVC: 2
SDB213998: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-14-216-6740
Flexible Carbon Scraper

142166740
CS1: RNCC: 3 | RNVC: 2
41S665: RNCC: 5 | RNVC: 9

1 Jan 1965

5110-99-733-7262

5110-17-026-0600
Bearing Scraper

170260600
333-68-16: RNCC: 3 | RNVC: 2

15 May 1970

5110-15-184-7350
Bedano Da Falegname

151847350
3QANFLM15: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-27-011-7707
Hand Reamer

270117707
09013KR0999: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-942-0060

5110-99-942-0274

5110-66-149-3752

5110-99-120-0893
Cut Wire Rope Blade

991200893
H525: RNCC: 2 | RNVC: 2
H525: RNCC: 6 | RNVC: 9
1A3744: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-165-4103
Spatola Con Lama Ri

151654103
915440: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-010-5178

5110-15-116-3712
Diagonal Cutting Pliers

151163712
595E/CP: RNCC: 3 | RNVC: 2

28 Apr 1993

5110-12-371-5698
Knife Blade

123715698
37040: RNCC: 3 | RNVC: 2
37 BR: RNCC: 5 | RNVC: 2

19 Apr 2007

5110-98-203-4328
Knockout Punch And Die

982034328
010J: RNCC: 3 | RNVC: 2

14 Nov 1989

5110-15-208-4791
Lima

152084791
3LPKMZAGMDN160: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-023-0156

5110-14-239-5189

5110-99-496-0803
Paint Scraper

994960803
21 4384: RNCC: 3 | RNVC: 2

3 Feb 1993

5110-21-800-3799

5110-21-849-8173
Hand File

218498173
39GP30: RNCC: 4 | RNVC: 1
5110-0532: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-99-365-4554
Hex Wrench Steel

993654554
BO768: RNCC: 3 | RNVC: 2

29 Apr 2004

5110-21-104-9965
Hand Operated Asbestos Cement Shingle Cutter

211049965
GGGC736: RNCC: 4 | RNVC: 1
REVA: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-12-022-8064

5110-17-121-7398
Hand Cable Stripper

171217398
T10271: RNCC: 3 | RNVC: 2

19 Nov 2008

5110-12-126-3288
Nozzle Broach Set

121263288
162000: RNCC: 3 | RNVC: 2
235: RNCC: 3 | RNVC: 2
1620: RNCC: 5 | RNVC: 2
101456: RNCC: 5 | RNVC: 2
W446: RNCC: 5 | RNVC: 9
515K: RNCC: 5 | RNVC: 9
322: RNCC: 5 | RNVC: 9
513G002: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-010-5206

5110-22-609-6970
Hand File Set

226096970
L1230AL06: RNCC: 3 | RNVC: 2

17 Feb 2005

5110-21-639-4877

5110-21-639-4595

5110-98-200-9269
Reamer Blade Set

982009269
NO PRIMARY REF 98-200-9269: RNCC: 3 | RNVC: 2
ST 16: RNCC: 5 | RNVC: 2

20 Feb 1987

5110-23-113-7806
D 45 H7 Reamer

231137806
T813-01-74: RNCC: 3 | RNVC: 2

30 May 2003

5110-33-161-6846
Two Man Crosscut Saw

331616846
31.11: RNCC: 2 | RNVC: 2

24 Jul 1995

5110-14-244-3683

5110-15-205-0507
Mattock Head Ax

152050507
156001400: RNCC: 3 | RNVC: 2
(241)A4155156001400: RNCC: 5 | RNVC: 2

15 Feb 2012

5110-27-011-7680
Hand Reamer

270117680
09013KR1084: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-15-210-4795
Fustella

152104795
EX5110RN0406435: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-301-5033
File Handle

123015033
0811 490 7860: RNCC: 3 | RNVC: 9

19 Oct 1984

5110-21-105-0138

5110-14-324-7020
Tube Cutter

143247020
2103300: RNCC: 3 | RNVC: 2
M54: RNCC: 5 | RNVC: 2

1 Jan 1975

5110-27-047-8710
Craftsman's Knife

270478710
SUNGER BICAGI: RNCC: 2 | RNVC: 1

21 Dec 2009

5110-15-197-2556
Screw Thread Insert Breaker

151972556
PN UAS 00022127: RNCC: 3 | RNVC: 2
5120F76014733: RNCC: 5 | RNVC: 9

2 Apr 2004

5110-14-295-6800

5110-12-314-7791
Saw Handle

123147791
NO PRIMARY REF 12-314-7791: RNCC: 3 | RNVC: 2
352-40: RNCC: 5 | RNVC: 9
SAEGEGRIFF-352-40: RNCC: 5 | RNVC: 9

10 Aug 1988

5110-12-364-6472
Hand Wire Stripper

123646472
K41: RNCC: 3 | RNVC: 2

19 Oct 2004

5110-14-393-3756

5110-27-011-7673
Hand Reamer

270117673
09013KR1077: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-37-516-5906

5110-25-128-9256
Hole Saw

251289256
1730: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-12-192-7688
Auflage

121927688
VG95211-ML-121927688: RNCC: 2 | RNVC: 2
105-13141W3.010: RNCC: 3 | RNVC: 2
105-13141W3-010: RNCC: 5 | RNVC: 2

19 May 1982

5110-99-300-6577
Hand Groover Blade

993006577
NO PRIMARY REF 99-300-6577: RNCC: 3 | RNVC: 2
11000: RNCC: 5 | RNVC: 2

4 Mar 1993

5110-99-693-0931
Pliers

996930931
TL-502-224: RNCC: 3 | RNVC: 2

28 Nov 2007

5110-16-001-6938
Hand File

160016938
286211602525: RNCC: 3 | RNVC: 2

11 Mar 2002

5110-99-606-8018

5110-12-126-1480
Hand Reamer

121261480
DIN9-A2,5: RNCC: 2 | RNVC: 2
F3317-2,5: RNCC: 3 | RNVC: 2
501-A2,5: RNCC: 3 | RNVC: 2
501-FORM A-2,5: RNCC: 5 | RNVC: 2
513E204HSS2-5: RNCC: 5 | RNVC: 9
A2-5DIN9: RNCC: 5 | RNVC: 9
DIN9-A2-5: RNCC: 5 | RNVC: 9
2-5DIN9SCHNELLARBEITSSTAHL: RNCC: 5 | RNVC: 9
DIN9A2-5: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-899-4785
Dimpling Die

218994785
ZT2063-#6: RNCC: 3 | RNVC: 2
ZT2063-6: RNCC: 5 | RNVC: 2

8 Aug 1985

5110-99-910-5917
Spokeshave

999105917
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H2333: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
DL9A-H2333: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-27-007-8139
Hand File

270078139
150MM UCGEN: RNCC: 2 | RNVC: 1

20 Jun 2002

5110-99-764-7677
Hand Hacksaw Frame

997647677
60B: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-22-603-3317
Hand File

226033317
411 BECU: RNCC: 3 | RNVC: 2
411 BECU: RNCC: 5 | RNVC: 2

25 Mar 2003

5110-33-103-9422
Hand Operated Cable Cutter

331039422
790.296: RNCC: 3 | RNVC: 2

23 Jun 1995

5110-15-199-0740
Double Bow Cutting Punch

151990740
3703-6: RNCC: 3 | RNVC: 2
C3703-6: RNCC: 5 | RNVC: 2

12 Jan 2005

5110-15-176-7820
Coltello

151767820
5282/1: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-27-046-7166
End Cutting Nippers

270467166
04022904823: RNCC: 2 | RNVC: 1

2 Oct 2009

5110-17-701-4984
Spiraa Schraapstaal

177014984
2730: RNCC: 3 | RNVC: 2

14 May 1970

5110-15-233-3519
Serie Lime Ad Ago

152333519
T300: RNCC: 3 | RNVC: 2
2260: RNCC: 3 | RNVC: 2
511015E039208: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-21-901-6641
Bent Trimmers Shears

219016641
28: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

8 Aug 1986

5110-15-230-5662
Tronchese Diagonale

152305662
1084/200: RNCC: 3 | RNVC: 2
511015E089942: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-27-011-5023
Hand File

270115023
10121ME0050: RNCC: 2 | RNVC: 1

20 Jan 2003

5110-15-195-8937
Pliers

151958937
A9064230112AC: RNCC: 3 | RNVC: 2
(241)AJ611A9064230112AC: RNCC: 5 | RNVC: 2

23 May 2011

5110-33-156-4495
Diagonal Cutting Pliers

331564495
005.460: RNCC: 3 | RNVC: 2

18 Mar 1994

5110-15-217-8569
Fustelle A Cavallot

152178569
3702/3: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-910-5184
File Handle

999105184
H1317: RNCC: 2 | RNVC: 2
FA14411: RNCC: 3 | RNVC: 2
UKD1SPR0V2209: RNCC: 5 | RNVC: 1
H20142: RNCC: 5 | RNVC: 2
H01101: RNCC: 5 | RNVC: 2
F1FA14410: RNCC: 6 | RNVC: 9
9105184: RNCC: 6 | RNVC: 9
1B5067: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-221-1479
Tronchese

152211479
188B160: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-4708
Lima

152084708
3LCNQUCND0N225: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-910-5116
File And Burnisher

999105116
COORDPATH4000: RNCC: 2 | RNVC: 2
H21305: RNCC: 5 | RNVC: 2
FA13220: RNCC: 6 | RNVC: 9
1A3845: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-12-182-5571
Hand Reamer

121825571
123530: RNCC: 3 | RNVC: 9
4632: RNCC: 5 | RNVC: 9

11 Feb 1980

5110-21-876-2883
Hand Masonry Drill

218762883
SAFI: RNCC: 3 | RNVC: 1
5133-3311: RNCC: 6 | RNVC: 9

30 Aug 1977

5110-17-025-7657
Hand File

170257657
NO PRIMARY REF 17-025-7657: RNCC: 3 | RNVC: 2
003722: RNCC: 5 | RNVC: 2

15 May 1970

5110-66-149-7485
Hand File

661497485
NO PRIMARY REF 66-149-7485: RNCC: 3 | RNVC: 2
07079801: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-99-423-8742

5110-99-419-4353

5110-12-135-2993
Hand Reamer

121352993
513G003-15: RNCC: 3 | RNVC: 2
838-15: RNCC: 3 | RNVC: 2

30 May 1969

5110-15-215-0706
Confezione Lame Pz.

152150706
C5281: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-090-1683

5110-66-146-7426
Hand Reamer

661467426
547162C: RNCC: 3 | RNVC: 2
547162C: RNCC: 5 | RNVC: 2

24 Aug 2000

5110-12-126-1652

5110-66-150-3385
Hand Operated Cable Cutter

661503385
K40: RNCC: 3 | RNVC: 2
02534866: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-14-257-7559

5110-22-601-0325
Back Spotfac Cutter

226010325
AT403B: RNCC: 5 | RNVC: 2

27 Aug 2002

5110-14-556-1662
Paper Cutter

145561662
1040465: RNCC: 3 | RNVC: 2

7 Feb 2008

5110-15-133-0108
Serie Punzoni

151330108
38S6A: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-220-3693
Seghetto Tipo Puk

152203693
08105: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-33-210-3329
Hand File

332103329
2112: RNCC: 3 | RNVC: 2

3 Aug 2012

5110-25-138-4591
Isbor Skjaer

251384591
125MM: RNCC: 3 | RNVC: 2

13 Mar 1990

5110-99-628-8108

5110-15-233-4348
Spatola Mm.60

152334348
59505: RNCC: 3 | RNVC: 2
511015E055367: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-66-154-9215
Seatbelt Cutter

661549215
980.005.022: RNCC: 3 | RNVC: 2
10726: RNCC: 3 | RNVC: 2

9 Oct 2006

5110-25-128-9242
Firmer Chisel

251289242
HK384: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-12-156-7430
Plumber's Hand Saw

121567430
4046510: RNCC: 3 | RNVC: 2
40025101: RNCC: 3 | RNVC: 2
665-010: RNCC: 5 | RNVC: 2
665010: RNCC: 5 | RNVC: 2
8266200: RNCC: 5 | RNVC: 9
51840010: RNCC: 5 | RNVC: 9
611981: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-402-1125

5110-99-910-4249
Paring Chisel

999104249
DEFSTAN51-11 PART 27: RNCC: 4 | RNVC: 1
DL9A: RNCC: 5 | RNVC: 9
DL9A-H434: RNCC: 5 | RNVC: 9
H434: RNCC: 6 | RNVC: 9
FA11339: RNCC: 6 | RNVC: 9
H434: RNCC: 6 | RNVC: 9
1A425: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-942-0133
Hand Reamer

999420133
BS122 PART 2: RNCC: 4 | RNVC: 1
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16316: RNCC: 6 | RNVC: 9
DEFSTAN51-9: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-9966
Hand Reamer

999109966
BS122 PART 2: RNCC: 4 | RNVC: 1
DEFSTAN51-9: RNCC: 6 | RNVC: 9
BS122PT2: RNCC: 6 | RNVC: 9
F1FA16221: RNCC: 6 | RNVC: 9
10124: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-176-0711
Lama Bimetallica

151760711
3010X27-Z5/7: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-165-4085
Ravvivamola A Rotel

151654085
763200030: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4252
Ricambio Matrice E

151654252
215R: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-14-551-1644
Glass Cutter

145511644
356: RNCC: 3 | RNVC: 2

30 Aug 2006

5110-15-205-4408
Metal Cutting Hand Saw

152054408
BM 1341: RNCC: 3 | RNVC: 2
(241)A9260BM1341: RNCC: 5 | RNVC: 2

9 Mar 2012

5110-99-232-8740
Hand Reamer

992328740
A06070DA: RNCC: 3 | RNVC: 2
A06070DAP: RNCC: 5 | RNVC: 2
1MEVDTN: RNCC: 6 | RNVC: 9

1 Apr 2003

5110-21-105-1300

5110-21-105-0109

5110-21-639-5543

5110-15-214-6790
Serie Alfabeto

152146790
VSC24A: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-122-0645
Exposed Blade Tube Deburring Tool

171220645
7122004: RNCC: 3 | RNVC: 2

3 Apr 2009

5110-15-189-9093
Seghetto Bahco Ergo

151899093
359-5387: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-12-120-6606
Flexible Carbon Scraper

121206606
2486: RNCC: 3 | RNVC: 2
106407: RNCC: 5 | RNVC: 2
615: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-165-3882
Tronchesino Abc Mm.

151653882
17945: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-807-1200
Craftsman's Knife

218071200
77: RNCC: 3 | RNVC: 2

26 Jun 1964

5110-27-015-5602
Hand File

270155602
14001YP20843: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-27-014-9019
Single Bow Cutting Punch

270149019
5110ATFD0131: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-22-610-3469
File Handle

226103469
07146157: RNCC: 3 | RNVC: 2
0357-0176-8080: RNCC: 3 | RNVC: 2

12 May 2005

5110-12-139-8865
Hand File

121398865
NO PRIMARY REF 12-139-8865: RNCC: 3 | RNVC: 2
B100X5DIN8334: RNCC: 5 | RNVC: 9

30 May 1969

5110-12-330-2969
Hand Wire Stripper

123302969
734300-1: RNCC: 3 | RNVC: 2

28 Nov 1992

5110-21-899-5342
Die

218995342
AV-126: RNCC: 3 | RNVC: 2
126AV: RNCC: 5 | RNVC: 2
AV126: RNCC: 5 | RNVC: 2

17 Dec 1985

5110-99-214-0724

5110-22-117-5637
Chisel

221175637
3083-3077: RNCC: 3 | RNVC: 2

5 Aug 1981

5110-12-385-4388
Farriers' Chisel

123854388
52.000.015: RNCC: 3 | RNVC: 2
52.000.015: RNCC: 5 | RNVC: 2

1 Jun 2011

5110-15-210-4160
Archetto Per Seghet

152104160
1205: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-221-1235
Forbici

152211235
7716100: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4604
Alesatore Cilindric

152084604
3AANFCFMEQ4-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-135-9692
Cesoia Tagliacavo 6

151359692
148L: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-15-184-9302
Tagliaforapiastrell

151849302
NSN511015R656352: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-211-7943
Raschietto

152117943
RSCT1: RNCC: 5 | RNVC: 3
RSCT1: RNCC: 5 | RNVC: 9

16 Nov 2005

5110-22-618-8640
Finger Grip Hand Saw

226188640
540340: RNCC: 3 | RNVC: 2

16 Mar 2009

5110-21-108-7662
Tube Cutter

211087662
RF99: RNCC: 3 | RNVC: 2
KM03: RNCC: 3 | RNVC: 2
KM03A: RNCC: 3 | RNVC: 2
32910: RNCC: 3 | RNVC: 2
TC28: RNCC: 3 | RNVC: 2
39GP49: RNCC: 4 | RNVC: 1
10: RNCC: 5 | RNVC: 1
120: RNCC: 5 | RNVC: 2
35235: RNCC: 5 | RNVC: 2
MT12300: RNCC: 6 | RNVC: 9

25 May 1968

5110-17-700-9990
Hand Masonry Drill

177009990
DAK0620310: RNCC: 3 | RNVC: 2

15 May 1970

5110-12-372-4486
Diagonal Cutting Pliers

123724486
431007: RNCC: 3 | RNVC: 2

18 Jul 2007

5110-15-165-4119
Punzoni In Acciaio

151654119
368125: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-12-140-3218

5110-14-244-0822

5110-15-138-0787
Tronchese Tagliente

151380787
186003: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-221-4751
Tagliapiastrelle

152214751
EX5110RI7420248: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-104-9607
Bow Saw

211049607
282: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-13-113-5638
Hand Wire Stripper

131135638
502E: RNCC: 3 | RNVC: 2

11 Apr 1989

5110-12-175-7803
Craftsman's Knife

121757803
J0KARI28: RNCC: 3 | RNVC: 9

16 Oct 1978

5110-22-620-1014
Hand Metal Stamping Die

226201014
2255735: RNCC: 3 | RNVC: 2

14 Dec 2009

5110-15-215-8076
Scalpello Riaff.Ton

152158076
20202: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-221-4734
Attrezzo

152214734
EX5110RI7421694: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-334-6010
Straight Trimmers Shears

123346010
WRSOM0324: RNCC: 3 | RNVC: 2

27 May 1994

5110-25-105-9099
Diagonal Cut Pliers

5110-99-614-5315

5110-99-120-7296
Bladesxhand Wire St

5110-15-165-4147
Ugello

151654147
1850UP: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-230-5438
Hand Operated Cable Cutter

152305438
511015E068169: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-27-014-8948
Hand Reamer

270148948
3455ATF16455: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-66-130-0230
File Handle

661300230
GB235: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
29010: RNCC: 5 | RNVC: 2

24 Aug 1987

5110-99-744-5171
Hand File

997445171
AL-DRD-300: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-98-200-2037
Special Repair Tool

982002037
NO PRIMARY REF 98-200-2037: RNCC: 3 | RNVC: 2
MIRA BB MB 88 AD: RNCC: 5 | RNVC: 2

7 Mar 1986

5110-98-854-4497

5110-41-000-7545
Bearing Scraper

410007545
5079-233: RNCC: 3 | RNVC: 2
301 30 045: RNCC: 5 | RNVC: 2

20 Aug 2008

5110-15-186-5959
Penna Elettrica

151865959
5621000: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-137-9593
Tronchese

151379593
1184001: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-14-310-4971
Socle Decoupage

143104971
568-5-8: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-15-188-3262
Hand Metal Cutting Shears

151883262
02119001P: RNCC: 3 | RNVC: 2
211 A: RNCC: 5 | RNVC: 2
25565: RNCC: 5 | RNVC: 2
391241124205: RNCC: 6 | RNVC: 9

2 Sep 2009

5110-12-135-2994
Hand Reamer

121352994
838-7: RNCC: 3 | RNVC: 2
513G003-7: RNCC: 3 | RNVC: 2

30 May 1969

5110-12-120-1110

5110-12-197-4342
Meiszel Halter

121974342
61653: RNCC: 3 | RNVC: 2

24 Oct 1983

5110-12-126-1734

5110-14-244-3696

5110-14-244-0756

5110-25-101-8153
Jack Plane

251018153
INART5028: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-21-896-7648
Fret Saw Blade

218967648
W2: RNCC: 3 | RNVC: 2

11 Feb 1985

5110-22-308-3262
Hand Metal Cutting Shears

223083262
584D: RNCC: 3 | RNVC: 2

18 Oct 1991

5110-14-366-7140

5110-15-165-3665
Testa Pi Roditrice

151653665
98850: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-217-5348
Allargatubo

152175348
ALLARGATUBO: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-002-4737
Reamer

150024737
34004 01 2490: RNCC: 3 | RNVC: 2

29 Aug 2013

5110-12-010-5265

5110-99-120-0899
Hole Cutter Body

991200899
H5713: RNCC: 2 | RNVC: 2
H5713: RNCC: 6 | RNVC: 9
FA11552: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-833-1245
Piston Holding Bush

998331245
MC1276014: RNCC: 3 | RNVC: 2

16 May 2002

5110-99-549-0183
Hand Hacksaw Blade

995490183
AA47R: RNCC: 3 | RNVC: 2
300-32-100P: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-32-001-1423
Paring Chisel

320011423
SAF-SP-C-0033: RNCC: 4 | RNVC: 1

8 Sep 1976

5110-33-206-9521
Hand File

332069521
0904.00430: RNCC: 3 | RNVC: 2
350.513: RNCC: 3 | RNVC: 2
4006-4 FIN: RNCC: 3 | RNVC: 2
8414299422405: RNCC: 5 | RNVC: 2

24 Sep 2008

5110-15-208-4759
Alesatore

152084759
3AAWFCFRDP6: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-195-3963
Hand Metal Cutting Shears

151953963
CGSBC-24: RNCC: 3 | RNVC: 2
(241)AF517CGSBC-24: RNCC: 5 | RNVC: 2

21 Mar 2011

5110-15-158-8850
Adz

151588850
PN UAS 00038826: RNCC: 3 | RNVC: 2
5120F76032834: RNCC: 5 | RNVC: 9

31 Mar 2004

5110-19-001-6442
Keyhole Saw

190016442
80.211: RNCC: 3 | RNVC: 2

23 Jun 2006

5110-99-427-9155

5110-15-210-5212
Serie Di 3 Scalpell

152105212
SERIE3SCALPELLI: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-115-6839
Brick Chisel

171156839
385 060 1: RNCC: 3 | RNVC: 2

19 May 2003

5110-15-215-7404
Trancia

152157404
138-7: RNCC: 5 | RNVC: 3
138-7: RNCC: 5 | RNVC: 9

16 Nov 2005

5110-15-208-5344
Pettine S 24 Pezzi

152085344
4PIEDC24S: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-807-1148
S Cutting Punch Set

218071148
770: RNCC: 3 | RNVC: 2

5 Feb 1964

5110-17-701-4747
Hand Reamer

177014747
8-75H7DIN206SS: RNCC: 2 | RNVC: 1
586-8-75: RNCC: 3 | RNVC: 2
DIN206: RNCC: 4 | RNVC: 1

14 May 1970

5110-98-205-5115
Hand File

982055115
DFAMPD00100 A: RNCC: 2 | RNVC: 2

11 Jan 2001

5110-98-200-3399
Ship Scraper

982003399
2015-3 INCH: RNCC: 3 | RNVC: 2

29 Apr 1986

5110-14-512-3942
Tube Cutter

145123942
92.642.750: RNCC: 3 | RNVC: 9

12 Feb 1999

5110-12-351-4771
Hand- Entgrater

123514771
53811311: RNCC: 3 | RNVC: 2
53811310: RNCC: 5 | RNVC: 9

31 Jul 2000

5110-12-339-1966
End Cutting Nippers

123391966
T3799HF: RNCC: 3 | RNVC: 2
6432120ESD: RNCC: 3 | RNVC: 2
4003773025078: RNCC: 5 | RNVC: 2
00.16.01.49: RNCC: 5 | RNVC: 2

24 Oct 1995

5110-15-208-4555
Fustella Abitabile

152084555
3FATGRAI15: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-216-3144
Archetto

152163144
0695552892: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-22-307-8774
Diagonal Cutting Pliers

223078774
8156: RNCC: 3 | RNVC: 2

6 Jan 1989

5110-12-126-2109

5110-15-214-8601
Lima Piatta Dolce

152148601
3LCNPNCNDOM200: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-868-1352
Hand Metal Stamping Die Set

218681352
1500: RNCC: 3 | RNVC: 1

20 Oct 1972

5110-15-218-5152
Seghetto Ad Arco Pi

152185152
SEGHETTOPICCOLO: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-150-8482
Hollo Cutting Punch

991508482
787211291: RNCC: 3 | RNVC: 2
FL991JZ0163: RNCC: 6 | RNVC: 9

4 Nov 1999

5110-12-362-5421
Craftsman's Knife

123625421
54.0084.961.37: RNCC: 3 | RNVC: 2
12320: RNCC: 5 | RNVC: 2

5 Mar 2004

5110-12-371-5277
Craftsman's Knife

123715277
71171: RNCC: 3 | RNVC: 2
00.21.60.26: RNCC: 5 | RNVC: 2

13 Apr 2007

5110-15-183-3923
Utensile

151833923
00400480: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-180-3315
Flexible Armored Cable Cutter And Crimper

151803315
(241)A4249504131205: RNCC: 3 | RNVC: 2
504131205: RNCC: 3 | RNVC: 2

18 Apr 2008

5110-15-165-4302
Lama Per Cesoia

151654302
1120RL: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-146-2592
Tagliapiastrella Ma

151462592
3075: RNCC: 3 | RNVC: 2

11 Jul 1997

5110-12-166-3102
Hand Wire Stripper

121663102
MK400: RNCC: 3 | RNVC: 2
785201: RNCC: 3 | RNVC: 2
JK00151100: RNCC: 5 | RNVC: 2
L116.950: RNCC: 5 | RNVC: 2
785: RNCC: 5 | RNVC: 9
785201: RNCC: 5 | RNVC: 9

23 Jul 1976

5110-15-209-4231
Tronchese

152094231
1188A: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-66-025-5942
Diagonal Cutting Pliers

660255942
PW773: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-12-381-8803
Montage- Messer

123818803
0731801S: RNCC: 3 | RNVC: 2

14 Apr 2010

5110-15-165-4094
Lima A Coltello

151654094
256626: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-208-4830
Alesatore Cilindr.T

152084830
3AAXFCFRDP9-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-074-7490
Bozzello

150747490
38864: RNCC: 3 | RNVC: 2

31 Dec 1975

5110-14-490-8830
Alesoir

144908830
4067 010 000 293: RNCC: 3 | RNVC: 2
F300 0T 000 5102: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-99-138-5679
General Pu Hand Saw

991385679
05500: RNCC: 3 | RNVC: 2
55: RNCC: 5 | RNVC: 2
65W00001: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-812-3651
Engine Turning Tool

998123651
EMT111: RNCC: 3 | RNVC: 2
LV3RREMT111: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-234-6327
Graffatrice

152346327
TITAN CT370U: RNCC: 3 | RNVC: 2

27 Aug 2007

5110-12-314-1112
Handbetaetig Griff

123141112
122304: RNCC: 3 | RNVC: 2
698-768-0000: RNCC: 5 | RNVC: 2
89231056: RNCC: 5 | RNVC: 2

8 Jun 1988

5110-25-109-5306
Bearing Scraper

251095306
5110-25-00147NL: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-98-104-2493
Hand Reamer Set

981042493
NO PRIMARY REF 98-104-2493: RNCC: 3 | RNVC: 2
235: RNCC: 5 | RNVC: 2

1 Jun 1990

5110-21-637-5597
Hand Reamer

216375597
CRITCHLEYANGLEBLADE: RNCC: 3 | RNVC: 1
22: RNCC: 3 | RNVC: 2
1F108120: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-23-113-4492
Fitter's Knife

231134492
8053708: RNCC: 3 | RNVC: 2

19 Dec 1999

5110-21-806-7061
Inclosed Blade Tube Deburring Tool

218067061
208F: RNCC: 3 | RNVC: 2
N172: RNCC: 3 | RNVC: 2
1149-1: RNCC: 5 | RNVC: 2

9 Jun 1964

5110-99-717-9757
Rabbet Plane

997179757
010-1-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-22-619-5513
Tube Cutter

226195513
2566117: RNCC: 3 | RNVC: 2

5 Aug 2009

5110-99-147-5711
Slide Hammer

991475711
MC1278020: RNCC: 3 | RNVC: 2

17 May 2002

5110-15-220-4886
Adattatore Angolare

152204886
4932 3443 12: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-123-9762
Sgorbia Per Falegna

151239762
5211G6: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-165-4201
Seghetto Per Metall

151654201
27260300: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-3685
Scalpello Per Legno

151653685
605638: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-210-5958
Coltello Da Combatt

152105958
ART697: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-310-4986
Poincon De Rabattag

143104986
568-7-10: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-25-100-7173
Single Bit Ax

251007173
NO PRIMARY REF25-100-7173: RNCC: 3 | RNVC: 2
210102-5: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-21-639-4289
Hand File

216394289
39GP30: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-58-000-4364
Hand Valve Seat Rotary Tool

580004364
800028/ENGINE TYPE W9L32: RNCC: 3 | RNVC: 2
3V84B0197: RNCC: D | RNVC: 9

11 May 2011

5110-17-701-3845
Craftsman's Knife

177013845
0513-09: RNCC: 3 | RNVC: 2
002936: RNCC: 5 | RNVC: 2

19 Jan 1973

5110-25-122-4871
Skjaerstaal

5110-21-866-8955
Block Plane

218668955
1247: RNCC: 3 | RNVC: 2

14 Jul 1972

5110-15-158-1644
Raschietto

151581644
RASCHIETTO: RNCC: 2 | RNVC: 2

18 Dec 2003

5110-12-370-9554
Diagonal Cutting Pliers

123709554
0612010: RNCC: 3 | RNVC: 2

22 Jan 2007

5110-21-895-4473
Hand File Set

218954473
937404: RNCC: 3 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

20 May 1984

5110-21-842-6314
Hand Operated Wire Rope Cutter

218426314
190TN: RNCC: 3 | RNVC: 2

4 Jun 1968

5110-25-100-4511
Craftsman's Knife

251004511
140MMLG: RNCC: 5 | RNVC: 1

1 Jan 1984

5110-15-117-7932
Reamer

151177932
P-175501-401/402-12C001-1004: RNCC: 3 | RNVC: 2
P175501-401/402-12C001-1004: RNCC: 5 | RNVC: 2

28 Jan 1994

5110-21-868-1568
Cylinder Ridge Reamer

218681568
WR30: RNCC: 3 | RNVC: 2

17 Nov 1972

5110-12-126-2185
Hand Metal Stamping Die Set

121262185
DIN7353-SATZKLEIN-5: RNCC: 2 | RNVC: 2
331-5KLEINBUCHSTABEN: RNCC: 3 | RNVC: 2
331005KLEINBUCHSTABEN: RNCC: 5 | RNVC: 2
SKLBTDIN7353ENG5DIN1451: RNCC: 5 | RNVC: 9
DIN7353-SATZKLEIN5: RNCC: 5 | RNVC: 9
SATZKLEIN5DIN7353: RNCC: 5 | RNVC: 9
DIN7353SATZKLEIN5: RNCC: 5 | RNVC: 9

30 May 1969

5110-98-105-8770

5110-15-189-9982
Forbici Per Elettri

151899982
011300000: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-22-304-2780

Load More Results