What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 7 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 7of 112

5110-01-582-3917
End Cutting Nippers

015823917
4-1242: RNCC: 3 | RNVC: 2
01.57.71.57: RNCC: 5 | RNVC: 2

19 Feb 2010

5110-01-580-9960
Tube Cutter

015809960
12841: RNCC: 3 | RNVC: 2
1492: RNCC: 3 | RNVC: 2
146/229/6: RNCC: 5 | RNVC: 2

4 Jan 2010

NSN 5110-01-580-7933 015807933 KNIFE,CRAFTSMAN'S

5110-01-580-7933
Craftsman's Knife

29 Dec 2009

5110-01-579-5607
Craftsman's Knife

17 Nov 2009

5110-01-578-1725
Tube Cutter

29 Sep 2009

5110-01-574-9113
Knife Electricians

15 Jun 2009

5110-01-574-9097
Diagonal Cutting Pliers

15 Jun 2009

5110-01-574-0611
Pocket Knife

015740611
22-01534: RNCC: 3 | RNVC: 2

14 May 2009

5110-01-570-3570
Pocket Folding Multi-Tool

015703570
ST1N: RNCC: 3 | RNVC: 2

23 Dec 2008

5110-01-566-0511
Metal Cutting Hand Saw

18 Aug 2008

5110-01-565-9091
Pocket Scissors

12 Aug 2008

5110-01-565-7749
Ceramic Cutter

015657749
41625600: RNCC: 3 | RNVC: 2

6 Aug 2008

5110-01-563-8228
Pocket Knife

015638228
1550-6: RNCC: 3 | RNVC: 2

22 May 2008

5110-01-561-6823
Metal Cutting Hand Saw

015616823
K145: RNCC: 3 | RNVC: 2
67818: RNCC: 5 | RNVC: 2
K145: RNCC: 5 | RNVC: 2
03651812: RNCC: 5 | RNVC: 2
03651812: RNCC: 5 | RNVC: 2

13 Mar 2008

5110-01-557-1044
Hand File Set

015571044
22062N: RNCC: 3 | RNVC: 2
22062N: RNCC: 5 | RNVC: 9

11 Oct 2007

5110-01-554-6910
Razor Blade Glass Scraper

015546910
28-500: RNCC: 3 | RNVC: 2

16 Aug 2007

5110-01-554-2846
Bolt Cutter

015542846
SKU: DE-BM: RNCC: 3 | RNVC: 2

3 Aug 2007

5110-01-550-4681
Scraping Knife

015504681
F22: RNCC: 3 | RNVC: 2

19 Apr 2007

5110-01-550-4680
Scraping Knife

015504680
F42: RNCC: 3 | RNVC: 2

19 Apr 2007

5110-01-549-6714
Hand Operated Cable Cutter Blade

015496714
WCB-1250: RNCC: 3 | RNVC: 2

28 Mar 2007

5110-01-549-5343
Pocket Folding Multi-Tool

015495343
81080001K: RNCC: 3 | RNVC: 2
81080001K: RNCC: 3 | RNVC: 2
2628: RNCC: 5 | RNVC: 1
5110NCM071150: RNCC: 5 | RNVC: 1

22 Mar 2007

5110-01-548-9073
Pocket Knife

015489073
7530: RNCC: 3 | RNVC: 2

7 Mar 2007

5110-01-548-9060
Hand Cold Chisel

015489060
10212: RNCC: 3 | RNVC: 2

7 Mar 2007

5110-01-546-9381
Tube Cutter

015469381
17CMF5008: RNCC: 3 | RNVC: 2

9 Jan 2007

5110-01-545-1463
Non-Rotating Deburring Blade Holder

015451463
00384271: RNCC: 3 | RNVC: 2
U HOLDER: RNCC: 5 | RNVC: 2
U HOLDER: RNCC: 5 | RNVC: 9

2 Nov 2006

5110-01-543-9818
Pocket Folding Multi-Tool

27 Sep 2006

5110-01-542-7174
Rotary Tool Mandrel

015427174
4568A12: RNCC: 3 | RNVC: 2
A113915 ITEM 13: RNCC: 5 | RNVC: 1
A113915 ITEM 13: RNCC: 5 | RNVC: 1

15 Aug 2006

5110-01-542-6594
Hand Reamer

015426594
9727047-23: RNCC: 3 | RNVC: 2

14 Aug 2006

5110-01-542-4511
Hand Reamer

015424511
9727047-25: RNCC: 3 | RNVC: 2

7 Aug 2006

5110-01-542-4509
Hand Reamer

015424509
9727047-07: RNCC: 3 | RNVC: 2

7 Aug 2006

5110-01-542-4506
Hand Reamer

015424506
9727047-15: RNCC: 3 | RNVC: 2

7 Aug 2006

5110-01-542-4512
Hand Reamer

015424512
9727047-21: RNCC: 3 | RNVC: 2

7 Aug 2006

5110-01-542-4504
Hand Reamer

015424504
9727047-13: RNCC: 3 | RNVC: 2

7 Aug 2006

5110-01-542-4507
Hand Reamer

015424507
9727047-17: RNCC: 3 | RNVC: 2

7 Aug 2006

5110-01-542-4505
Hand Reamer

015424505
9727047-11: RNCC: 3 | RNVC: 2

7 Aug 2006

5110-01-541-8747
Hand Operated Wire Rope Cutter

015418747
W-075: RNCC: 3 | RNVC: 2

13 Jul 2006

5110-01-541-7476
Hand Cable Stripper

015417476
TXFF-QA/G: RNCC: 3 | RNVC: 2

11 Jul 2006

5110-01-541-6139
Refrigeration Kit

015416139
ASSY 80005: RNCC: 3 | RNVC: 2

5 Jul 2006

5110-01-541-2485
Thermal Cutter Blade

015412485
T013/45: RNCC: 3 | RNVC: 2
A113905 ITEM 37: RNCC: 5 | RNVC: 2
A113905 ITEM 37: RNCC: 5 | RNVC: 9
A113905 ITEM 37: RNCC: C | RNVC: 1

21 Jun 2006

5110-01-541-2321
Scraping Knife

015412321
US712: RNCC: 3 | RNVC: 2

20 Jun 2006

5110-01-541-2074
Battery Service Kit

015412074
ASSY 80015: RNCC: 3 | RNVC: 2

20 Jun 2006

5110-01-541-2073
Carpenters Kit

015412073
ASSY 80019: RNCC: 3 | RNVC: 2

20 Jun 2006

5110-01-541-2063
Cbu Equipment Shop

015412063
ASSY 83057: RNCC: 3 | RNVC: 2

20 Jun 2006

5110-01-541-1783
Bent Trimmers Shears

015411783
5110-01-541-1783: RNCC: 3 | RNVC: 2
5-4-7270-1: RNCC: 5 | RNVC: 2
3879A3: RNCC: 5 | RNVC: 2
426: RNCC: 5 | RNVC: 2
426: RNCC: 5 | RNVC: 9

19 Jun 2006

5110-01-541-1789
Embroidery Scissors

015411789
3882A3: RNCC: 3 | RNVC: 2
A113915 ITEM 10: RNCC: 5 | RNVC: 2
A113915 ITEM 10: RNCC: 5 | RNVC: 9
A113915 ITEM 10: RNCC: C | RNVC: 1

19 Jun 2006

5110-01-541-1452
Pocket Folding Multi-Tool

015411452
830471: RNCC: 3 | RNVC: 2
FUSE/CAP CRIMPER/NYLON: RNCC: 5 | RNVC: 1

16 Jun 2006

5110-01-541-1445
Pocket Folding Multi-Tool

015411445
830601: RNCC: 3 | RNVC: 2
KICK/SS/POCKET CLIP/NYLON: RNCC: 5 | RNVC: 2

16 Jun 2006

5110-01-541-1456
Pocket Folding Multi-Tool

015411456
830468: RNCC: 3 | RNVC: 2
KICK/BLACK/CAP/NYLON: RNCC: 5 | RNVC: 2

16 Jun 2006

5110-01-541-1448
Pocket Folding Multi-Tool

015411448
830251: RNCC: 3 | RNVC: 2
FUSE/WITHOUT KNIFE/NYLON: RNCC: 5 | RNVC: 2

16 Jun 2006

5110-01-541-1451
Pocket Folding Multi-Tool

015411451
830472: RNCC: 3 | RNVC: 2
FUSE/CAP CRIMPER/LEATHER: RNCC: 5 | RNVC: 1

16 Jun 2006

5110-01-541-1457
Pocket Folding Multi-Tool

015411457
830479: RNCC: 3 | RNVC: 2
BLAST/CAP CRIMPER/LEATHER: RNCC: 5 | RNVC: 1

16 Jun 2006

5110-01-541-1444
Pocket Folding Multi-Tool

015411444
830599: RNCC: 3 | RNVC: 2
KICK/SS/POCKET CLIP/LEATHER: RNCC: 5 | RNVC: 2

16 Jun 2006

5110-01-541-1449
Pocket Folding Multi-Tool

015411449
830475: RNCC: 3 | RNVC: 2
FUSE/BLACK/CAP CRIMPER/NYLON: RNCC: 5 | RNVC: 1

16 Jun 2006

5110-01-541-1450
Pocket Folding Multi-Tool

015411450
830266: RNCC: 3 | RNVC: 2
FUSE/BLACK/NYLON: RNCC: 5 | RNVC: 1

16 Jun 2006

5110-01-541-1447
Pocket Folding Multi-Tool

015411447
830597: RNCC: 3 | RNVC: 2
FUSE/WITHOUT KNIFE/LEATHER: RNCC: 5 | RNVC: 2

16 Jun 2006

5110-01-541-1443
Pocket Folding Multi-Tool

015411443
830800: RNCC: 3 | RNVC: 2
CHARGE AL/BLACK/NYLON: RNCC: 5 | RNVC: 1
830272: RNCC: 5 | RNVC: 9
CHARGE TI/BLACK/NYLON: RNCC: 5 | RNVC: 9

16 Jun 2006

5110-01-541-1438
Pocket Folding Multi-Tool

015411438
830478: RNCC: 3 | RNVC: 2
BLAST/CAP CRIMPER/NYLON: RNCC: 5 | RNVC: 1

16 Jun 2006

5110-01-541-1440
Pocket Folding Multi-Tool

015411440
830486: RNCC: 3 | RNVC: 2
WAVE/SS/CAP/LEATHER: RNCC: 5 | RNVC: 2

16 Jun 2006

5110-01-540-9535
Pocket Folding Multi-Tool

015409535
830464: RNCC: 3 | RNVC: 1
KICK/SS/CAP/NYLON: RNCC: 5 | RNVC: 2

8 Jun 2006

5110-01-540-9534
Pocket Folding Multi-Tool

015409534
830465: RNCC: 3 | RNVC: 1
KICK/SS/CAP/LEATHER: RNCC: 5 | RNVC: 2

8 Jun 2006

5110-01-540-7818
Drive Socket

015407818
S7020-02700-101: RNCC: 3 | RNVC: 2

1 Jun 2006

5110-01-540-7813
Kit Rework Decal

015407813
151484: RNCC: 3 | RNVC: 2

1 Jun 2006

5110-01-540-7814
Poly-Te Teflon Tape

015407814
5X584: RNCC: 3 | RNVC: 2

1 Jun 2006

5110-01-540-6183
Edge Cutting Trimming Tool

015406183
TRIM-12-S-06: RNCC: 3 | RNVC: 2

25 May 2006

5110-01-540-6163
Hand Wire Stripper

25 May 2006

5110-01-539-9985
Pocket Knife

015399985
22-01608: RNCC: 3 | RNVC: 2

5 May 2006

5110-01-540-0188
Pocket Folding Multi-Tool

015400188
22-08474: RNCC: 3 | RNVC: 2
RECOIL AUTO-PLIER: RNCC: 5 | RNVC: 1

5 May 2006

5110-01-539-9994
Pocket Folding Multi-Tool

015399994
22-01549: RNCC: 3 | RNVC: 2
MULTI-PLIER 600 CABLE CUTTER: RNCC: 5 | RNVC: 1

5 May 2006

5110-01-539-9992
Pocket Folding Multi-Tool

015399992
30-001009: RNCC: 3 | RNVC: 2
FREEHAND: RNCC: 5 | RNVC: 1
22-01513: RNCC: 5 | RNVC: 9
22-01517: RNCC: 5 | RNVC: 9
30-000586: RNCC: 5 | RNVC: 9

5 May 2006

5110-01-539-9050
Utility Cutter

015399050
A113905 ITEM 6: RNCC: 3 | RNVC: 9
A113905 ITEM 6: RNCC: C | RNVC: 1

3 May 2006

5110-01-539-6851
Hand Wire Cutter

015396851
22-01063: RNCC: 3 | RNVC: 2

27 Apr 2006

5110-01-539-3662
Tube Cutter

015393662
40617: RNCC: 3 | RNVC: 2
00.02.04.10: RNCC: 5 | RNVC: 2

19 Apr 2006

5110-01-539-3661
Knife Blade

015393661
11-961A: RNCC: 3 | RNVC: 2
00.21.42.08: RNCC: 5 | RNVC: 2
1-11-802(EUROPE): RNCC: 5 | RNVC: 2

19 Apr 2006

5110-01-537-4654
Hand Wire Stripper

015374654
7294K56: RNCC: 3 | RNVC: 2

8 Feb 2006

5110-01-536-2358
Diagonal Cutting Pliers

015362358
5445A13: RNCC: 3 | RNVC: 2
A113905 ITEM 10: RNCC: 5 | RNVC: 9
A113905 ITEM 10: RNCC: C | RNVC: 1

23 Dec 2005

5110-01-535-1795
Hand Operated Cable Cutter

015351795
C7040-7030: RNCC: 3 | RNVC: 2

17 Nov 2005

5110-01-534-9749
Pocket Folding Multi-Tool

015349749
07572: RNCC: 3 | RNVC: 2
MULTI-PLIER 600 FISHERMAN: RNCC: 5 | RNVC: 1
TL1-GBR-47572A: RNCC: 5 | RNVC: 2

8 Nov 2005

5110-01-534-7661
Pocket Folding Multi-Tool

1 Nov 2005

5110-01-534-0120
Bolt Cutter

015340120
DE-BM: RNCC: 3 | RNVC: 2

4 Oct 2005

5110-01-533-0838
Hand File

30 Aug 2005

5110-01-532-9342
Block Plane

015329342
51308666: RNCC: 3 | RNVC: 2

24 Aug 2005

5110-01-532-6380
Fastener Retainer Trimming Tool

015326380
FTTT-4-0-2: RNCC: 3 | RNVC: 2

15 Aug 2005

5110-01-532-1345
Diagonal Cutting Pliers

29 Jul 2005

5110-01-532-1344
Hand Cable Stripper

015321344
45-514: RNCC: 3 | RNVC: 2

29 Jul 2005

5110-01-531-3061
Blade Sharpener

015313061
REOAX204: RNCC: 3 | RNVC: 2

1 Jul 2005

5110-01-531-2335
Hand Cable Stripper

015312335
CE-1400600: RNCC: 3 | RNVC: 2

29 Jun 2005

5110-01-531-0054
Needle Nose Pliers

015310054
TL1-SPR-03197K: RNCC: 3 | RNVC: 2

20 Jun 2005

5110-01-531-0056
Needle Nose Pliers

015310056
TL1-SPR-03198E: RNCC: 3 | RNVC: 2

20 Jun 2005

5110-01-530-2292
Needle File Set

015302292
37755: RNCC: 3 | RNVC: 2
37755: RNCC: 5 | RNVC: 9

18 May 2005

5110-01-528-9896
Hand Cable Stripper

015289896
CPT-6590: RNCC: 3 | RNVC: 2

30 Mar 2005

5110-01-528-2335
Hand Wire Stripper

015282335
1113: RNCC: 3 | RNVC: 2
1113 PALADIN: RNCC: 5 | RNVC: 2

7 Mar 2005

5110-01-528-0451
Hand Cable Stripper

015280451
ST-600EZ: RNCC: 3 | RNVC: 2

1 Mar 2005

5110-01-527-8536
Wire Stripper Blade Set

015278536
45-2542-1: RNCC: 3 | RNVC: 2

22 Feb 2005

5110-01-525-6662
Pocket Folding Multi-Tool

015256662
830140: RNCC: 3 | RNVC: 2
BLAST/BLACK/NYLON: RNCC: 5 | RNVC: 2

18 Nov 2004

5110-01-525-4931
Hand File

015254931
91B400: RNCC: 3 | RNVC: 2
FLXFX3045: RNCC: 5 | RNVC: 2

10 Nov 2004

5110-01-525-4930
Hand File

015254930
91B600: RNCC: 3 | RNVC: 2
FLXFX3048: RNCC: 5 | RNVC: 2

10 Nov 2004

5110-01-525-4929
Hand File

015254929
91B200: RNCC: 3 | RNVC: 2
FLXFX3043: RNCC: 5 | RNVC: 2

10 Nov 2004

5110-01-524-9367
Dimpling Die Body

015249367
ZT186301-8: RNCC: 3 | RNVC: 2

21 Oct 2004

5110-01-524-9062
Airc Alignment Tool

015249062
3491AS0433-1: RNCC: 3 | RNVC: 2
3491AS0525-1: RNCC: 3 | RNVC: 2

21 Oct 2004

5110-01-524-7566
Hand Metal Cutting Shears

015247566
2503620: RNCC: 3 | RNVC: 2

14 Oct 2004

5110-01-524-4634
Single Bit Ax

015244634
300-FHY8: RNCC: 3 | RNVC: 2
1179289: RNCC: 5 | RNVC: 2
FHY-8: RNCC: 5 | RNVC: 2

4 Oct 2004

5110-01-523-2323
Hand Cable Stripper

015232323
200-026: RNCC: 3 | RNVC: 2

24 Aug 2004

5110-01-522-8042
Air Ecs Fan Fixture

015228042
18D8721-1: RNCC: 3 | RNVC: 2

12 Aug 2004

5110-01-520-8379
Hand Wire Stripper

27 May 2004

5110-01-519-6062
Knockout Punch And Die Set

015196062
36687: RNCC: 3 | RNVC: 2

26 Apr 2004

5110-01-518-9737
Bolt Cutter

015189737
UCC-30: RNCC: 3 | RNVC: 2

30 Mar 2004

5110-01-518-8409
Cork Borer Sharpener

015188409
07-865: RNCC: 3 | RNVC: 2
H-9680: RNCC: 5 | RNVC: 2

25 Mar 2004

5110-01-518-8410
Multipurpose Ax

015188410
1365748: RNCC: 3 | RNVC: 2
MAX AX: RNCC: 3 | RNVC: 2

25 Mar 2004

5110-01-518-5917
Seat Belt Cutter

015185917
45423: RNCC: 3 | RNVC: 2
33546: RNCC: 3 | RNVC: 2
04-0206: RNCC: 5 | RNVC: 1
5110NCM032339: RNCC: 5 | RNVC: 1

17 Mar 2004

5110-01-518-2506
Hand Reamer

015182506
ST-309-2: RNCC: 3 | RNVC: 2

5 Mar 2004

5110-01-518-2505
Hand Reamer

015182505
ST-309-1: RNCC: 3 | RNVC: 2

5 Mar 2004

5110-01-518-2178
Hand Hacksaw Blade

015182178
SF1224: RNCC: 3 | RNVC: 2

4 Mar 2004

5110-01-517-9134
Cable Stripper Blade Set

015179134
STG-204.4001: RNCC: 3 | RNVC: 9

24 Feb 2004

5110-01-516-5146
Pocket Folding Multi-Tool

015165146
B60-CAF: RNCC: 3 | RNVC: 2
B60-N: RNCC: 5 | RNVC: 2

8 Jan 2004

5110-01-516-3246
Pocket Folding Multi-Tool

31 Dec 2003

5110-01-516-3238
Pocket Knife

31 Dec 2003

5110-01-516-3245
Pocket Folding Multi-Tool

31 Dec 2003

5110-01-515-4347
Inclosed Blade Tube Deburring Tool

015154347
MS-TDT-24: RNCC: 3 | RNVC: 2

25 Nov 2003

5110-01-514-7773
Kitchen Knife Sharpener

015147773
REOSS500: RNCC: 3 | RNVC: 2
REDI-EDGE STAINLESS STEEL: RNCC: 5 | RNVC: 1

4 Nov 2003

5110-01-513-8977
Airc Insertion Tool

015138977
TW2066: RNCC: 3 | RNVC: 2

9 Oct 2003

5110-01-513-6847
Pin Grid Array Pga

015136847
TW2060: RNCC: 3 | RNVC: 2

2 Oct 2003

5110-01-513-0130
Flexible Carbon Scraper

015130130
BC01: RNCC: 3 | RNVC: 2

16 Sep 2003

5110-01-512-9600
Hand Operated Cable Cutter

015129600
2-1437001-2: RNCC: 3 | RNVC: 2

15 Sep 2003

5110-01-510-2795
Hand Cable Stripper

015102795
501198-1: RNCC: 3 | RNVC: 2

16 Jul 2003

5110-01-510-2794
Straight Trimmers Shears

015102794
1278637-1: RNCC: 3 | RNVC: 2

16 Jul 2003

5110-01-510-1909
Hand Optical Fiber Stripper

015101909
492109-2: RNCC: 3 | RNVC: 2

15 Jul 2003

5110-01-509-5762
Torque Wrench Adapter

26 Jun 2003

5110-01-509-4217
Mounting Bracket

015094217
123-1477: RNCC: 3 | RNVC: 2

20 Jun 2003

5110-01-508-9477
Conductor Folding Tool

015089477
CE-1402400-FOLDTOOL-ASSY: RNCC: 3 | RNVC: 2

6 Jun 2003

5110-01-508-4067
Scraper Blade

015084067
120-34-SP211: RNCC: 3 | RNVC: 2

20 May 2003

5110-01-506-8181
Tool Wire Wrap Kit

015068181
7056626-02: RNCC: 3 | RNVC: 2

10 Apr 2003

5110-01-506-8178
Airc Extractor Tool

015068178
7056626-28: RNCC: 3 | RNVC: 2

10 Apr 2003

5110-01-502-4316
Craftsman's Knife

015024316
68-101: RNCC: 3 | RNVC: 2

5 Nov 2002

5110-01-502-4317
Knife Blade

5 Nov 2002

5110-01-502-1837
Hand Operated Wire Rope Cutter

015021837
14822511: RNCC: 3 | RNVC: 2

28 Oct 2002

5110-01-501-4266
Hand File

015014266
TMWSS074: RNCC: 3 | RNVC: 2

2 Oct 2002

5110-01-500-9590
Diagonal Cutting Pliers

015009590
67-163: RNCC: 3 | RNVC: 2
67-163: RNCC: 3 | RNVC: 9
67-163: RNCC: 5 | RNVC: 9

18 Sep 2002

5110-01-500-7759
Hand Reamer

015007759
5232: RNCC: 3 | RNVC: 2

10 Sep 2002

5110-01-498-2802
Pocket Knife

20 Jun 2002

5110-01-497-4007
Airc Clutch Adapter

014974007
3590AS710-1: RNCC: 3 | RNVC: 2
3590AS710-1: RNCC: 5 | RNVC: 2
3590AS710-1: RNCC: 5 | RNVC: 2

20 May 2002

5110-01-496-2132
Scraper Blade

014962132
6931005 ITEM 5: RNCC: 3 | RNVC: 2

6 Apr 2002

5110-01-494-2982
Hand Reamer

014942982
TD525C1-66: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2988
Hand Reamer

014942988
TD525C1-52: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-3329
Hand Reamer

014943329
TD525C1-46: RNCC: 3 | RNVC: 2

7 Feb 2002

5110-01-494-2998
Hand Reamer

014942998
TD525C1-58: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2999
Hand Reamer

014942999
TD525C1-54: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2995
Hand Reamer

014942995
TD525C1-55: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2994
Hand Reamer

014942994
TD525C1-48: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2996
Hand Reamer

014942996
TD525C1-50: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2997
Hand Reamer

014942997
TD525C1-53: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2990
Hand Reamer

014942990
TD525C1-56: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2984
Hand Reamer

014942984
TD525C1-68: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2992
Hand Reamer

014942992
TD525C1-51: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2989
Hand Reamer

014942989
TD525C1-47: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2983
Hand Reamer

014942983
TD525C1-67: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2991
Hand Reamer

014942991
TD525C1-57: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2979
Hand Reamer

014942979
TD525C1-62: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2978
Hand Reamer

014942978
TD525C1-64: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2980
Hand Reamer

014942980
TD525C1-61: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2981
Hand Reamer

014942981
TD525C1-65: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-2977
Hand Reamer

014942977
TD525C1-63: RNCC: 3 | RNVC: 2

6 Feb 2002

5110-01-494-1178
Hand Reamer

014941178
TD525C1-99: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1181
Hand Reamer

014941181
TD525C1-95: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1185
Hand Reamer

014941185
TD525C1-72: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1187
Hand Reamer

014941187
TD525C1-73: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1184
Hand Reamer

014941184
TD525C1-70: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1183
Hand Reamer

014941183
TD525C1-75: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1182
Hand Reamer

014941182
TD525C1-82: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1169
Hand Reamer

014941169
TD525C1-77: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1180
Hand Reamer

014941180
TD525C1-74: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1179
Hand Reamer

014941179
TD525C1-69: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1175
Hand Reamer

014941175
TD525C1-79: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1173
Hand Reamer

014941173
TD525C1-93: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1174
Hand Reamer

014941174
TD525C1-80: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1170
Hand Reamer

014941170
TD525C1-81: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1172
Hand Reamer

014941172
TD525C1-76: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1168
Hand Reamer

014941168
TD525C1-78: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-1167
Hand Reamer

014941167
TD525C1-94: RNCC: 3 | RNVC: 2

31 Jan 2002

5110-01-494-0478
Hand Reamer

014940478
TD525C1-45: RNCC: 3 | RNVC: 2

29 Jan 2002

5110-01-493-8753
Hand Reamer

014938753
TD525C1-92: RNCC: 3 | RNVC: 2

23 Jan 2002

5110-01-493-8752
Hand Reamer

014938752
TD525C1-91: RNCC: 3 | RNVC: 2

23 Jan 2002

5110-01-493-8751
Hand Reamer

014938751
TD525C1-90: RNCC: 3 | RNVC: 2

23 Jan 2002

5110-01-493-7888
Hand Reamer

014937888
TD525C1-102: RNCC: 3 | RNVC: 2

17 Jan 2002

5110-01-493-7892
Hand Reamer

014937892
TD525C1-103: RNCC: 3 | RNVC: 2

17 Jan 2002

5110-01-493-7890
Hand Reamer

014937890
TD525C1-83: RNCC: 3 | RNVC: 2

17 Jan 2002

5110-01-493-7889
Hand Reamer

014937889
TD525C1-106: RNCC: 3 | RNVC: 2

17 Jan 2002

5110-01-493-7887
Hand Reamer

014937887
TD525C1-104: RNCC: 3 | RNVC: 2

17 Jan 2002

5110-01-493-7891
Hand Reamer

014937891
TD525C1-105: RNCC: 3 | RNVC: 2

17 Jan 2002

5110-01-493-7893
Hand Reamer

014937893
TD525C1-84: RNCC: 3 | RNVC: 2

17 Jan 2002

5110-01-493-7884
Hand Reamer

014937884
TD525C1-101: RNCC: 3 | RNVC: 2

17 Jan 2002

5110-01-493-7883
Hand Reamer

014937883
TD525C1-85: RNCC: 3 | RNVC: 2

17 Jan 2002

5110-01-492-8462
Hand Set Reamer

014928462
B94.2: RNCC: 3 | RNVC: 1
KTST10030A: RNCC: 5 | RNVC: 9
70090-01141-01: RNCC: 5 | RNVC: 9

13 Dec 2001

5110-01-492-7995
Hand Reamer

014927995
TD525C1-71: RNCC: 3 | RNVC: 2

12 Dec 2001

5110-01-491-8702
Hand Cable Stripper

014918702
ST1/STC-W: RNCC: 3 | RNVC: 2

5 Nov 2001

5110-01-490-7222
Hand File Set

014907222
080-576-000: RNCC: 3 | RNVC: 2

4 Oct 2001

5110-01-490-7214
Nut Splitting Tool

014907214
00904772000: RNCC: 3 | RNVC: 2
4772: RNCC: 5 | RNVC: 2
9-4772: RNCC: 5 | RNVC: 9

4 Oct 2001

5110-01-490-7213
Hand File

014907213
051144-80836: RNCC: 3 | RNVC: 2
6210J: RNCC: 5 | RNVC: 2

4 Oct 2001

5110-01-489-5988
Diagonal Cutting Pliers

18 Sep 2001

5110-01-488-9264
Tool Sleeve Puller

014889264
MCF8149-1: RNCC: 3 | RNVC: 2

6 Sep 2001

5110-01-488-3939
Inst Tool Spline Hu

014883939
269T3330-3: RNCC: 3 | RNVC: 9
269T3330-3: RNCC: C | RNVC: 1

23 Aug 2001

5110-01-487-6105
Socket Pitch Bearin

014876105
269T1221: RNCC: 3 | RNVC: 9
269T1221: RNCC: C | RNVC: 1

12 Aug 2001

5110-01-487-5248
Hand Operated Wire Rope Cutter

014875248
MODEL 1A: RNCC: 3 | RNVC: 2

8 Aug 2001

5110-01-486-1392
Special Dowler

014861392
LJ-107664PC15: RNCC: 3 | RNVC: 2

20 Jun 2001

5110-01-485-1405
Flexible Carbon Scraper

014851405
46055: RNCC: 3 | RNVC: 2

17 May 2001

5110-01-483-1713
Dispenser

014831713
SMDE602A-CE: RNCC: 3 | RNVC: 2

19 Mar 2001

5110-01-483-1046
Hand Valve Seat Rotary Tool

014831046
40404-1 FIND 31: RNCC: 3 | RNVC: 2

15 Mar 2001

5110-01-482-9675
Crosscut Hand Saw

12 Mar 2001

5110-01-482-9568
Metal Cutting Hand Saw

014829568
100: RNCC: 3 | RNVC: 2
1790008: RNCC: 5 | RNVC: 9

12 Mar 2001

5110-01-481-6004
Pull Rod

014816004
2640-682-10 ITEM 14: RNCC: 3 | RNVC: 2

16 Jan 2001

5110-01-481-6005
Valve Seat Remover

16 Jan 2001

5110-01-481-1764
Piston Ring Groove Reconditioning Tool

014811764
2470571-2: RNCC: 3 | RNVC: 2

20 Dec 2000

5110-01-481-1754
Seat Reamer

014811754
2470901: RNCC: 3 | RNVC: 2

20 Dec 2000

5110-01-481-1035
Hand Reamer

014811035
2472543: RNCC: 3 | RNVC: 2

18 Dec 2000

5110-01-481-0459
Piston Ring Groove Reconditioning Tool

014810459
2478697: RNCC: 3 | RNVC: 2

15 Dec 2000

5110-01-481-0464
Hand Reamer

014810464
2471633: RNCC: 3 | RNVC: 2

15 Dec 2000

5110-01-480-9731
Hand Reamer

014809731
2471634: RNCC: 3 | RNVC: 2

13 Dec 2000

5110-01-480-9732
Hand Reamer

014809732
2471632: RNCC: 3 | RNVC: 2

13 Dec 2000

5110-01-480-9693
Piston Ring Groove Reconditioning Tool

014809693
2478691: RNCC: 3 | RNVC: 2

13 Dec 2000

5110-01-479-5757
Diagonal Cutting Pliers Set

25 Oct 2000

5110-01-478-7052
Die Set

014787052
N10HT: RNCC: 3 | RNVC: 2
N10HT: RNCC: 5 | RNVC: 9

22 Sep 2000

5110-01-478-6293
Metal Cutting Hand Saw

014786293
K153: RNCC: 3 | RNVC: 2
4K799: RNCC: 5 | RNVC: 2

20 Sep 2000

5110-01-478-5590
Glass Cutter

014785590
14-120: RNCC: 3 | RNVC: 2
5C955: RNCC: 5 | RNVC: 2
14-120: RNCC: 5 | RNVC: 2

18 Sep 2000

5110-01-475-7986
Thermal Blanket

13 Jun 2000

5110-01-474-5519
Multi-Tool Adapter Kit

014745519
TZKIT1V: RNCC: 3 | RNVC: 9
TZKIT1V: RNCC: 5 | RNVC: 2
TZKIT1V: RNCC: 5 | RNVC: 2
TZKIT1V COOPER/CRESCENT: RNCC: 5 | RNVC: 9

5 May 2000

5110-01-474-5520
Pocket Folding Multi-Tool

5 May 2000

5110-01-474-5513
Pocket Folding Multi-Tool

014745513
TZ3: RNCC: 3 | RNVC: 2
TZ3 COOPER/CRESCENT: RNCC: 5 | RNVC: 2
TZ3: RNCC: 5 | RNVC: 9

5 May 2000

5110-01-474-5516
Pocket Folding Multi-Tool

5 May 2000

5110-01-474-5517
Pocket Folding Multi-Tool

5 May 2000

5110-01-474-5500
Pocket Folding Multi-Tool

5 May 2000

5110-01-474-5397
Aluminum Collapsible Saw

014745397
WYOMING SAW WYOMING KNIFE CORP: RNCC: 3 | RNVC: 2

5 May 2000

5110-01-474-5251
Pocket Folding Multi-Tool

014745251
CRUNCH LEATHERMAN: RNCC: 3 | RNVC: 1
CRUNCH/SS/NYLON: RNCC: 5 | RNVC: 1

4 May 2000

5110-01-474-4917
Metal Cutting Hand Saw

014744917
48-08-0401: RNCC: 3 | RNVC: 2
48-08-0401 MILWAUKEE: RNCC: 5 | RNVC: 2
48-08-0400 MILWAUKEE: RNCC: 5 | RNVC: 9
48-08-0400: RNCC: 5 | RNVC: 9

4 May 2000

5110-01-474-4912
Single Bit Ax

014744912
35MRFG-BSG: RNCC: 3 | RNVC: 2
35MRFG-BSG COUNCIL: RNCC: 5 | RNVC: 2

4 May 2000

5110-01-474-0076
Knockout Punch Die

014740076
KD750B: RNCC: 3 | RNVC: 2
KD750B GARDNER BENDER: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-474-0759
Bow Saw Blade

014740759
80821: RNCC: 3 | RNVC: 9
80821 COOPER/NICHOLSON: RNCC: 5 | RNVC: 2
80821: RNCC: 5 | RNVC: 2

24 Apr 2000

5110-01-474-0735
Hand Hacksaw Blade

014740735
GG12 GREENFIELD/RULE: RNCC: 3 | RNVC: 2

24 Apr 2000

5110-01-474-0070
Knockout Punch Die

014740070
KD1500B: RNCC: 3 | RNVC: 2
KD1500B GARDNER BENDER: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-474-0093
Knockout Punch Punch

014740093
KP750B: RNCC: 3 | RNVC: 2
KP750B GARDNER BENDER: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-474-0074
Knockout Punch Die

014740074
KD500B: RNCC: 3 | RNVC: 2
KD500B GARDNER BENDER: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-474-0081
Knockout Punch Punch

014740081
KP1000B: RNCC: 3 | RNVC: 2
KP1000B GARDNER BENDER: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-474-0090
Knockout Punch Punch

014740090
KP500B: RNCC: 3 | RNVC: 2
KP500B GARDNER BENDER: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-474-0072
Knockout Punch Die

014740072
KD2000B: RNCC: 3 | RNVC: 2
KD2000B GARDNER BENDER: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-474-0068
Knockout Punch Die

014740068
KD1000B: RNCC: 3 | RNVC: 2
KD1000B GARDNER BENDER: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-474-0069
Knockout Punch Die

014740069
KD1250B: RNCC: 3 | RNVC: 2
KD1250B GARDNER BENDER: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9895
Hand Cold Chisel

014739895
CC2432B: RNCC: 3 | RNVC: 2
CC2432B WILDE: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9776
Pipe Cutter Cutting Wheel

014739776
33100 RIDGID: RNCC: 3 | RNVC: 2
F-514 RIDGID: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9790
Tube Cutter

20 Apr 2000

5110-01-473-9812
Hand File And Rasp

014739812
75-11708: RNCC: 3 | RNVC: 2
75-11708 SIMONDS: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9782
Hand Reamer

20 Apr 2000

5110-01-473-9781
Tube Cutter

014739781
34572: RNCC: 3 | RNVC: 2
34572 RIDGID: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9696
Hand Cold Chisel Set

014739696
85002: RNCC: 3 | RNVC: 2
85002 MAYHEW: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9720
Hand File

014739720
11936 COOPER/NICHOLSON: RNCC: 3 | RNVC: 2

20 Apr 2000

5110-01-473-9718
Hand File

014739718
03698 COOPER/NICHOLSON: RNCC: 3 | RNVC: 2

20 Apr 2000

5110-01-473-9721
Hand File

014739721
14224: RNCC: 3 | RNVC: 2
14224 COOPER/NICHOLSON: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9715
Metal Cutting Hand Saw

014739715
80965: RNCC: 3 | RNVC: 2
80965 COOPER/NICHOLSON: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9681
Brick Chisel

014739681
85781: RNCC: 3 | RNVC: 2
85781 MAYHEW: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9678
Hand Bull Point Chisel

014739678
85090: RNCC: 3 | RNVC: 2
85090 MAYHEW: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9663
Hand Masonry Drill

014739663
30007: RNCC: 3 | RNVC: 2
30007 MAYHEW: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9664
Hand Masonry Drill

014739664
30009: RNCC: 3 | RNVC: 2
30009 MAYHEW: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9662
Hand Masonry Drill

014739662
30004: RNCC: 3 | RNVC: 2
30004 MAYHEW: RNCC: 5 | RNVC: 2

20 Apr 2000

5110-01-473-9436
Woodworking Butt Chisel

014739436
1045: RNCC: 3 | RNVC: 2
1045 GREAT NECK: RNCC: 5 | RNVC: 2

19 Apr 2000

5110-01-473-9439
Woodworking Butt Chisel

014739439
1048: RNCC: 3 | RNVC: 2
1048 GREAT NECK: RNCC: 5 | RNVC: 2

19 Apr 2000

5110-01-473-9458
Wallboard Saw

014739458
09015: RNCC: 3 | RNVC: 2
09015 HYDE: RNCC: 5 | RNVC: 2

19 Apr 2000

5110-01-473-9440
Hand Rasp

014739440
VP105 GREAT NECK: RNCC: 3 | RNVC: 2
VERSAPLANE: RNCC: 5 | RNVC: 1
VP105: RNCC: 5 | RNVC: 1

19 Apr 2000

5110-01-473-9438
Woodworking Butt Chisel

014739438
1047: RNCC: 3 | RNVC: 2
1047 GREAT NECK: RNCC: 5 | RNVC: 2

19 Apr 2000

5110-01-473-9435
Woodworking Butt Chisel

014739435
1043: RNCC: 3 | RNVC: 2
1043 GREAT NECK: RNCC: 5 | RNVC: 2

19 Apr 2000

5110-01-473-9437
Woodworking Butt Chisel

014739437
1046: RNCC: 3 | RNVC: 2
1046 GREAT NECK: RNCC: 5 | RNVC: 2

19 Apr 2000

5110-01-473-9434
Woodworking Butt Chisel

014739434
1041: RNCC: 3 | RNVC: 2
1041 GREAT NECK: RNCC: 5 | RNVC: 2

19 Apr 2000

5110-01-473-9422
Circle Cutter

014739422
55 GENERAL TOOL: RNCC: 3 | RNVC: 2

19 Apr 2000

5110-01-473-9293
Hand Operated Wire Rope Cutter

014739293
0690TN: RNCC: 3 | RNVC: 9
0690TN: RNCC: 5 | RNVC: 2
0690TN COOPER/HK PORTER: RNCC: 5 | RNVC: 2

19 Apr 2000

5110-01-473-9301
Crosscut Hand Saw

014739301
80270: RNCC: 3 | RNVC: 9
80270 COOPER/NICHOLSON: RNCC: 5 | RNVC: 2
80270: RNCC: 5 | RNVC: 2

19 Apr 2000

5110-01-473-9302
Crosscut Hand Saw

014739302
80370: RNCC: 3 | RNVC: 9
80370 COOPER/NICHOLSON: RNCC: 5 | RNVC: 2
80370: RNCC: 5 | RNVC: 2

19 Apr 2000

5110-01-473-9297
Bow Saw

014739297
80810: RNCC: 3 | RNVC: 9
80810: RNCC: 5 | RNVC: 2
80810 COOPER/NICHOLSON: RNCC: 5 | RNVC: 2

19 Apr 2000

5110-01-473-9299
Hand File

014739299
82002: RNCC: 3 | RNVC: 9
82002 COOPER/NICHOLSON: RNCC: 5 | RNVC: 2
82002: RNCC: 5 | RNVC: 2

19 Apr 2000

5110-01-473-9292
Hand Operated Wire Rope Cutter

014739292
0690C: RNCC: 3 | RNVC: 2
0690C COOPER/HK PORTER: RNCC: 5 | RNVC: 2

19 Apr 2000

5110-01-473-6406
Reamer Blade

014736406
99-38 COOPER/XCELITE: RNCC: 3 | RNVC: 2

12 Apr 2000

5110-01-473-6374
Diagonal Cutting Pliers

014736374
55CG COOPER/XCELITE: RNCC: 3 | RNVC: 2

12 Apr 2000

5110-01-471-7005
Lathing Hatchet

014717005
1790.06259: RNCC: 3 | RNVC: 2

10 Feb 2000

5110-01-471-7004
Transfer Screw

014717004
306362-001: RNCC: 3 | RNVC: 2

10 Feb 2000

5110-01-471-0483
Hand Wire Stripper

20 Jan 2000

5110-01-470-8957
Hand Optical Fiber Stripper

014708957
501554-1: RNCC: 3 | RNVC: 2

13 Jan 2000

5110-01-470-5693
Hand Wire Stripper

014705693
1011 KLEIN TOOLS: RNCC: 3 | RNVC: 2

26 Dec 1999

5110-01-470-4134
Diagonal Cutting Pliers

014704134
D243-8 KLEIN TOOLS: RNCC: 3 | RNVC: 2

19 Dec 1999

5110-01-470-4131
Pliers

014704131
D2000-9NE-CR KLEIN TOOLS: RNCC: 3 | RNVC: 2

19 Dec 1999

5110-01-470-3840
Pocket Folding Multi-Tool

014703840
S-38: RNCC: 3 | RNVC: 2
POWER PLIER: RNCC: 5 | RNVC: 1

16 Dec 1999

5110-01-470-3839
Pocket Folding Multi-Tool

16 Dec 1999

5110-01-470-3837
Pocket Folding Multi-Tool

16 Dec 1999

5110-01-470-3838
Pocket Folding Multi-Tool

014703838
S-31: RNCC: 3 | RNVC: 2
PARATOOL: RNCC: 5 | RNVC: 1

16 Dec 1999

5110-01-470-2133
1In Cutter Set

014702133
903-7298797PC10: RNCC: 3 | RNVC: 1

10 Dec 1999

5110-01-470-2093
.50In Cutter Set

014702093
903-7298797PC3: RNCC: 3 | RNVC: 1

10 Dec 1999

5110-01-470-0669
Pocket Knife

014700669
TM-5: RNCC: 3 | RNVC: 2

6 Dec 1999

5110-01-469-6900
Hand Operated Wire Rope Cutter

014696900
12374287: RNCC: 3 | RNVC: 2

18 Nov 1999

5110-01-466-3210
Hand File

014663210
16036: RNCC: 3 | RNVC: 2

14 Jul 1999

5110-01-464-0055
Craftsman's Knife

014640055
940251: RNCC: 3 | RNVC: 2
940251RED: RNCC: 5 | RNVC: 9

13 Apr 1999

5110-01-463-7201
Knife Blade

014637201
940031: RNCC: 3 | RNVC: 2

2 Apr 1999

5110-01-462-6743
Skewdriver Pro

11 Feb 1999

5110-01-462-3448
Pocket Knife

014623448
06425: RNCC: 3 | RNVC: 2
CHAMELEON II SERRATED: RNCC: 5 | RNVC: 1

29 Jan 1999

5110-01-462-3454
Pocket Knife

29 Jan 1999

5110-01-462-3453
Pocket Knife

29 Jan 1999

5110-01-462-3447
Pocket Knife

014623447
06420: RNCC: 3 | RNVC: 2
CHAMELEON II: RNCC: 5 | RNVC: 1

29 Jan 1999

5110-01-462-3439
Pocket Knife

29 Jan 1999

5110-01-462-3442
Pocket Knife

29 Jan 1999

5110-01-461-5968
Pocket Folding Multi-Tool

014615968
63010103: RNCC: 3 | RNVC: 2
SUPER TOOL: RNCC: 5 | RNVC: 1

18 Dec 1998

5110-01-460-3572
Inclosed Blade Tube Deburring Tool

014603572
D9850GRN: RNCC: 3 | RNVC: 2

3 Nov 1998

5110-01-460-3573
Inclosed Blade Tube Deburring Tool

014603573
D9851GRN: RNCC: 3 | RNVC: 2

3 Nov 1998

5110-01-459-1609
Dimpling Die

014591609
MM-210-5-L1/2: RNCC: 3 | RNVC: 2

22 Sep 1998

5110-01-459-1608
Dimpling Die

014591608
MM-210-4-L1/8: RNCC: 3 | RNVC: 2

22 Sep 1998

5110-01-459-1606
Dimpling Die

014591606
MM-210-2-L1/4: RNCC: 3 | RNVC: 2

22 Sep 1998

5110-01-458-4241
Hand Wire Stripper

014584241
24-7737: RNCC: 3 | RNVC: 2

26 Aug 1998

5110-01-458-4237
Hand Wire Stripper

014584237
24-7371P: RNCC: 3 | RNVC: 2

26 Aug 1998

5110-01-458-3697
Scraper Blade

014583697
966-4: RNCC: 3 | RNVC: 2

23 Aug 1998

5110-01-458-1235
Pocket Folding Multi-Tool

14 Aug 1998

5110-01-457-1633
Diagonal Cutting Pliers

014571633
B107.500: RNCC: 3 | RNVC: 1
B107.20 TY2CL2: RNCC: 5 | RNVC: 1
B107.20 TY2CL2: RNCC: 5 | RNVC: 1
B107.20: RNCC: 5 | RNVC: 1
D2000-9NE-CR: RNCC: 5 | RNVC: 2
B107.20M: RNCC: 5 | RNVC: 9
B107.20M TY2CL2: RNCC: 5 | RNVC: 9
B107.20M TY2CL2: RNCC: 5 | RNVC: 9

14 Jul 1998

5110-01-457-1628
Diagonal Cutting Pliers

014571628
D2000-9ST: RNCC: 3 | RNVC: 2

14 Jul 1998

5110-01-457-1634
Hand Cable Stripper

014571634
1012: RNCC: 3 | RNVC: 2

14 Jul 1998

5110-01-457-1626
Diagonal Cutting Pliers

014571626
D2000-32: RNCC: 3 | RNVC: 2

14 Jul 1998

5110-01-457-1629
Diagonal Cutting Pliers

014571629
D2000-7CST: RNCC: 3 | RNVC: 2

14 Jul 1998

NSN 5110-01-457-1631 014571631 PLIERS,DIAGONAL CUTTING

5110-01-457-1631
Diagonal Cutting Pliers

014571631
B107.500: RNCC: 3 | RNVC: 1
B107.20: RNCC: 5 | RNVC: 1
D2000-9NETP: RNCC: 5 | RNVC: 2
B107.20M: RNCC: 5 | RNVC: 9
B107.20M TY2CL2: RNCC: 5 | RNVC: 9

14 Jul 1998

5110-01-457-1632
Diagonal Cutting Pliers

014571632
HD2000-9NE: RNCC: 3 | RNVC: 2

14 Jul 1998

5110-01-457-1604
Hand Cable Stripper

014571604
B107.500: RNCC: 3 | RNVC: 1
1014: RNCC: 3 | RNVC: 2
B107.37: RNCC: 5 | RNVC: 1
B107.37 TY2CL1: RNCC: 5 | RNVC: 1
B107.37 TY2CL1: RNCC: 5 | RNVC: 1

14 Jul 1998

5110-01-456-9630
Collar Stripping

014569630
78-8073-8168-2: RNCC: 3 | RNVC: 2

2 Jul 1998

5110-01-456-7800
Craftsman's Knife

25 Jun 1998

5110-01-456-7803
Craftsman's Knife

014567803
YA582: RNCC: 3 | RNVC: 2

25 Jun 1998

5110-01-456-7427
Diagonal Cutting Pliers

014567427
87CPF: RNCC: 3 | RNVC: 9

24 Jun 1998

5110-01-454-7398
Special Item

014547398
CG00189: RNCC: 3 | RNVC: 2

12 Apr 1998

5110-01-454-7411
Special Item

014547411
CG00187: RNCC: 3 | RNVC: 2

12 Apr 1998

5110-01-454-7413
Special Item

014547413
CG00193: RNCC: 3 | RNVC: 2

12 Apr 1998

5110-01-454-7407
Special Item

014547407
CG00192: RNCC: 3 | RNVC: 2

12 Apr 1998

5110-01-454-7412
Special Item

014547412
CG00191: RNCC: 3 | RNVC: 2

12 Apr 1998

5110-01-454-7400
Special Item

014547400
CG00195: RNCC: 3 | RNVC: 2

12 Apr 1998

5110-01-454-7408
Special Item

014547408
CG00196: RNCC: 3 | RNVC: 2

12 Apr 1998

5110-01-454-7403
Special Item

014547403
CG00190: RNCC: 3 | RNVC: 2

12 Apr 1998

5110-01-454-7399
Special Item

014547399
CG00194: RNCC: 3 | RNVC: 2

12 Apr 1998

5110-01-454-7397
Special Item

014547397
CG00188: RNCC: 3 | RNVC: 2

12 Apr 1998

5110-01-454-2984
Utility Cutter

014542984
7500-1: RNCC: 3 | RNVC: 2

25 Mar 1998

5110-01-452-7563

5 Feb 1998

5110-01-452-7562
Utility Cutter Blade

014527562
9-37251: RNCC: 3 | RNVC: 2

5 Feb 1998

5110-01-452-7559
Utility Cutter Blade

014527559
9-37250: RNCC: 3 | RNVC: 2

5 Feb 1998

5110-01-452-7558

5 Feb 1998

5110-01-451-6336
Pocket Knife

014516336
1102R: RNCC: 3 | RNVC: 2

22 Dec 1997

5110-01-451-4944
Pocket Knife

17 Dec 1997

5110-01-451-4946
Pocket Folding Multi-Tool

014514946
61110001: RNCC: 3 | RNVC: 2
SIDECLIP: RNCC: 5 | RNVC: 1

17 Dec 1997

5110-01-451-4942
Pocket Knife

17 Dec 1997

5110-01-451-1704
Deburring Tool Blade

014511704
4289A65: RNCC: 3 | RNVC: 2

7 Dec 1997

5110-01-451-0024
Pocket Folding Multi-Tool

014510024
360: RNCC: 3 | RNVC: 2

2 Dec 1997

5110-01-450-9282
Hand Wire Stripper

014509282
462ST034: RNCC: 3 | RNVC: 2

26 Nov 1997

5110-01-449-9223
Hand Hacksaw Blade

014499223
HAC5012BX: RNCC: 3 | RNVC: 2

20 Oct 1997

5110-01-449-9226
Pocket Knife

014499226
360FL: RNCC: 3 | RNVC: 2

20 Oct 1997

5110-01-449-9227
Coping Saw Blade

014499227
COP40C: RNCC: 3 | RNVC: 2

20 Oct 1997

5110-01-449-9222
Pocket Knife

014499222
355: RNCC: 3 | RNVC: 2

20 Oct 1997

5110-01-449-9220
Pocket Knife

014499220
360CL: RNCC: 3 | RNVC: 2

20 Oct 1997

5110-01-449-8859
Knife Blade

19 Oct 1997

5110-01-449-8858
Craftsman's Knife

014498858
E-Z KUTTER - 666052A: RNCC: 3 | RNVC: 2

19 Oct 1997

5110-01-449-0968
Deburring Tool Blade

014490968
4289A63: RNCC: 3 | RNVC: 2

18 Sep 1997

5110-01-448-5864
Pocket Knife

014485864
2525: RNCC: 3 | RNVC: 2

3 Sep 1997

5110-01-448-4379
Crosscut Hand Saw

014484379
SS169: RNCC: 3 | RNVC: 2

28 Aug 1997

5110-01-448-4006
Knockout Punch Die

014484006
1430AV: RNCC: 3 | RNVC: 2

27 Aug 1997

5110-01-447-8141
Wire Stripper Blade

014478141
45-172: RNCC: 3 | RNVC: 2

14 Aug 1997

5110-01-446-7113
Utility Cutter

014467113
00937300000: RNCC: 3 | RNVC: 2
37300: RNCC: 5 | RNVC: 2
9-37300: RNCC: 5 | RNVC: 9
9-37200: RNCC: 5 | RNVC: 9

14 Jul 1997

5110-01-446-7112
Utility Cutter

014467112
9-37201: RNCC: 3 | RNVC: 2

14 Jul 1997

5110-01-446-5073
Pliers

7 Jul 1997

5110-01-446-4511
Diagonal Cutting Pliers

2 Jul 1997

5110-01-446-4510
Diagonal Cutting Pliers

2 Jul 1997

5110-01-446-4512
Diagonal Cutting Pliers

2 Jul 1997

5110-01-446-4507
Pliers

2 Jul 1997

5110-01-446-3647
Rivet Cutter

014463647
MS2134-3: RNCC: 2 | RNVC: 2

1 Jul 1997

5110-01-446-2067
Pliers

25 Jun 1997

5110-01-446-2052
Pliers

014462052
T641R: RNCC: 3 | RNVC: 2

25 Jun 1997

5110-01-446-2064
Pliers

014462064
T670L: RNCC: 3 | RNVC: 2

25 Jun 1997

5110-01-446-2059
Pliers

014462059
T644L: RNCC: 3 | RNVC: 2

25 Jun 1997

5110-01-446-2058
Pliers

014462058
T644R: RNCC: 3 | RNVC: 2

25 Jun 1997

5110-01-446-2062
Pliers

014462062
T670R: RNCC: 3 | RNVC: 2

25 Jun 1997

5110-01-446-2053
Pliers

014462053
T641L: RNCC: 3 | RNVC: 2

25 Jun 1997

5110-01-446-1314
Metal Cutting Hand Saw

014461314
HS520-I: RNCC: 3 | RNVC: 2
HS520-I: RNCC: 5 | RNVC: 9

24 Jun 1997

5110-01-446-1300
Cable Scoring Tool

014461300
CRP900: RNCC: 3 | RNVC: 2
CRP900: RNCC: 5 | RNVC: 2

24 Jun 1997

5110-01-446-1299
Cable Scoring Tool

014461299
CRP900-I: RNCC: 3 | RNVC: 2
CRP900-I: RNCC: 5 | RNVC: 2

24 Jun 1997

5110-01-445-9840
Pliers

014459840
T648R: RNCC: 3 | RNVC: 2

18 Jun 1997

5110-01-445-9836
Hand Wire Stripper-Crimper

014459836
T322: RNCC: 3 | RNVC: 2

18 Jun 1997

5110-01-445-9838
Pliers

014459838
T648L: RNCC: 3 | RNVC: 2

18 Jun 1997

5110-01-445-9835
Hand Wire Stripper-Crimper

014459835
T319: RNCC: 3 | RNVC: 2

18 Jun 1997

5110-01-445-9834
Hand Wire Stripper-Crimper

014459834
T318: RNCC: 3 | RNVC: 2

18 Jun 1997

5110-01-445-9833
Pliers

18 Jun 1997

5110-01-445-8815
Pocket Knife

014458815
KTC6566+6 AND KTC 6565+66: RNCC: 3 | RNVC: 2

15 Jun 1997

5110-01-445-8093
Hand Operated Cable Cutter

014458093
P9CC: RNCC: 3 | RNVC: 2
P9CC: RNCC: 5 | RNVC: 2

12 Jun 1997

5110-01-445-7618
Hand Metal Cutting Shears

014457618
T920R: RNCC: 3 | RNVC: 2

11 Jun 1997

5110-01-445-7617
Hand Metal Cutting Shears

014457617
T920L: RNCC: 3 | RNVC: 2

11 Jun 1997

5110-01-445-6787
Hand Metal Cutting Shears

014456787
T920: RNCC: 3 | RNVC: 2

9 Jun 1997

5110-01-445-4443
Hand Wire Stripper

014454443
T303: RNCC: 3 | RNVC: 9

2 Jun 1997

5110-01-445-4446
Hand Wire Stripper

014454446
T308: RNCC: 3 | RNVC: 9

2 Jun 1997

5110-01-445-4430
Hand Wire Stripper

014454430
T315: RNCC: 3 | RNVC: 9

2 Jun 1997

5110-01-445-4445
Hand Wire Stripper

014454445
T306: RNCC: 3 | RNVC: 9

2 Jun 1997

5110-01-445-4444
Hand Wire Stripper

014454444
T305: RNCC: 3 | RNVC: 9

2 Jun 1997

5110-01-445-4447
Hand Wire Stripper

014454447
T307: RNCC: 3 | RNVC: 9

2 Jun 1997

5110-01-445-2068
Multi-Tool Adapter

014452068
65010301K: RNCC: 3 | RNVC: 2
65010101: RNCC: 5 | RNVC: 9
65010301: RNCC: 5 | RNVC: 9

27 May 1997

5110-01-444-9565
Pliers

014449565
T645L: RNCC: 3 | RNVC: 2

21 May 1997

5110-01-444-9564
Pliers

014449564
T620L: RNCC: 3 | RNVC: 2

21 May 1997

5110-01-444-9568
Pliers

014449568
T620LS: RNCC: 3 | RNVC: 2

21 May 1997

5110-01-444-9563
Hand Operated Cable Cutter

014449563
T6054: RNCC: 3 | RNVC: 2

21 May 1997

5110-01-444-9566
Hand Operated Cable Cutter

014449566
T605: RNCC: 3 | RNVC: 2

21 May 1997

5110-01-444-9567
Pliers

014449567
T620RS: RNCC: 3 | RNVC: 2

21 May 1997

5110-01-444-9058

19 May 1997

5110-01-444-9064
Hand Wire Stripper-Crimper-Cutter

19 May 1997

5110-01-444-9061
Hand Operated Cable Cutter

014449061
T6044: RNCC: 3 | RNVC: 2

19 May 1997

5110-01-444-8506
Pliers

014448506
T620R: RNCC: 3 | RNVC: 2

18 May 1997

5110-01-444-8502

18 May 1997

5110-01-444-8499
Hand Wire Stripper-Crimper-Cutter

014448499
T301: RNCC: 3 | RNVC: 2

18 May 1997

5110-01-444-8488
Hand Operated Cable Cutter

014448488
T604: RNCC: 3 | RNVC: 2

18 May 1997

5110-01-444-8492
Pliers

014448492
T645R: RNCC: 3 | RNVC: 2

18 May 1997

5110-01-444-3649
Hand Metal Cutting Shears

5 May 1997

5110-01-443-8481
Diagonal Cutting Pliers

20 Apr 1997

5110-01-443-7390
Diagonal Cutting Pliers

014437390
P775HL: RNCC: 3 | RNVC: 2
P775HL: RNCC: 5 | RNVC: 2

16 Apr 1997

5110-01-443-6896
Craftsman's Knife

014436896
1570-3LR-INS: RNCC: 3 | RNVC: 2

15 Apr 1997

5110-01-443-4809
Multipurpose Pliers Tool Kit

014434809
07540G: RNCC: 3 | RNVC: 2

10 Apr 1997

5110-01-442-3589
Pliers

014423589
D213-8NE-INS: RNCC: 3 | RNVC: 2

12 Mar 1997

5110-01-442-3238
Pliers

014423238
D213-9NE-INS: RNCC: 3 | RNVC: 2

11 Mar 1997

5110-01-442-3236
Pliers

014423236
D2000-9NE-INS: RNCC: 3 | RNVC: 2

11 Mar 1997

5110-01-442-3240
Pliers

014423240
D203-8-INS: RNCC: 3 | RNVC: 2

11 Mar 1997

5110-01-442-3218
Pliers

014423218
B107.20: RNCC: 3 | RNVC: 1
D213-9NE-CR-INS: RNCC: 5 | RNVC: 2

11 Mar 1997

5110-01-442-3217
Pliers

014423217
12211-INS: RNCC: 3 | RNVC: 2

11 Mar 1997

5110-01-442-3225
Pliers

014423225
12098-INS: RNCC: 3 | RNVC: 2

11 Mar 1997

5110-01-442-1938
Diagonal Cutting Pliers

014421938
D220-7-INS: RNCC: 3 | RNVC: 1

6 Mar 1997

5110-01-442-1929
Chain Breaking Tool

014421929
CS-A1: RNCC: 3 | RNVC: 2

6 Mar 1997

5110-01-442-1916
Hand Operated Cable Cutter

014421916
585-6404634-17: RNCC: 3 | RNVC: 2

6 Mar 1997

5110-01-441-6933
Hand Punch Punch And Die Set

014416933
200050156: RNCC: 3 | RNVC: 2

20 Feb 1997

5110-01-441-3300
Knife Blade

014413300
42117: RNCC: 3 | RNVC: 2

9 Feb 1997

5110-01-440-7105
Scissors

014407105
620-1579: RNCC: 3 | RNVC: 2

22 Jan 1997

5110-01-440-5685
Hand File Set

17 Jan 1997

5110-01-440-4704

15 Jan 1997

5110-01-440-4272
Hand Reamer

014404272
24286: RNCC: 3 | RNVC: 2
LIST659 10: RNCC: 5 | RNVC: 9

13 Jan 1997

5110-01-440-4227
Hand Reamer

014404227
24284: RNCC: 3 | RNVC: 2
LIST659 8: RNCC: 5 | RNVC: 1

13 Jan 1997

5110-01-440-4223
Hand Reamer

014404223
24280: RNCC: 3 | RNVC: 2
LIST659 4: RNCC: 5 | RNVC: 1

13 Jan 1997

5110-01-440-4226
Hand Reamer

014404226
24282: RNCC: 3 | RNVC: 2
LIST659 6: RNCC: 5 | RNVC: 1

13 Jan 1997

5110-01-440-4225
Hand Reamer

014404225
24283: RNCC: 3 | RNVC: 2
LIST659 7: RNCC: 5 | RNVC: 1

13 Jan 1997

5110-01-440-4222
Hand Reamer

014404222
24279: RNCC: 3 | RNVC: 2
LIST659 3: RNCC: 5 | RNVC: 1

13 Jan 1997

5110-01-440-4228
Hand Reamer

014404228
24285: RNCC: 3 | RNVC: 2
LIST659 9: RNCC: 5 | RNVC: 1

13 Jan 1997

5110-01-440-4224
Hand Reamer

014404224
24281: RNCC: 3 | RNVC: 2
LIST659 5: RNCC: 5 | RNVC: 1

13 Jan 1997

5110-01-440-4217
Hand Reamer

014404217
24273: RNCC: 3 | RNVC: 2
LIST659 4/0: RNCC: 5 | RNVC: 1

13 Jan 1997

5110-01-440-4218
Hand Reamer

014404218
24274: RNCC: 3 | RNVC: 2
LIST659 3/0: RNCC: 5 | RNVC: 1

13 Jan 1997

5110-01-440-4220
Hand Reamer

014404220
24276: RNCC: 3 | RNVC: 2
LIST659 0: RNCC: 5 | RNVC: 1

13 Jan 1997

5110-01-440-4219
Hand Reamer

014404219
24275: RNCC: 3 | RNVC: 2
LIST659 2/0: RNCC: 5 | RNVC: 1

13 Jan 1997

5110-01-440-4221
Hand Reamer

014404221
24277: RNCC: 3 | RNVC: 2
LIST659 1: RNCC: 5 | RNVC: 1

13 Jan 1997

5110-01-438-9504
Cutting Tool

014389504
TKF 104-0 ITEM 9C: RNCC: 3 | RNVC: 2

22 Nov 1996

5110-01-438-9478
Knife Sheath

014389478
08764: RNCC: 3 | RNVC: 2
55921: RNCC: 5 | RNVC: 9
59762: RNCC: 5 | RNVC: 9

22 Nov 1996

5110-01-438-7460
Pocket Knife

014387460
05740: RNCC: 3 | RNVC: 2
RIVER RUNNER: RNCC: 5 | RNVC: 1

19 Nov 1996

5110-01-438-7466
Cutting Tool

014387466
TKF 104-0 ITEM 9D: RNCC: 3 | RNVC: 2

19 Nov 1996

5110-01-438-7459
Cutting Tool

014387459
TKF 104-0 ITEM 9A: RNCC: 3 | RNVC: 2

19 Nov 1996

5110-01-438-7462
Cutting Tool

014387462
TKF 104-0 ITEM 9B: RNCC: 3 | RNVC: 2

19 Nov 1996

5110-01-438-5721
Indexable Wood Chisel

014385721
CC-15-20-0: RNCC: 3 | RNVC: 2

12 Nov 1996

5110-01-438-3651
Indexable Wood Chisel

014383651
CC-75-87-0: RNCC: 3 | RNVC: 2

6 Nov 1996

5110-01-438-3652
Indexable Wood Chisel

014383652
CC-50-62-0: RNCC: 3 | RNVC: 2

6 Nov 1996

5110-01-438-3650
Indexable Wood Chisel

014383650
CC-10-12-0: RNCC: 3 | RNVC: 2

6 Nov 1996

5110-01-438-3653
Indexable Wood Chisel

014383653
CC-25-37-0: RNCC: 3 | RNVC: 2

6 Nov 1996

5110-01-438-2779
Special Staple Remover

014382779
120 1/2: RNCC: 3 | RNVC: 2

4 Nov 1996

5110-01-438-1845
Craftsman's Knife

014381845
1020: RNCC: 3 | RNVC: 2

1 Nov 1996

5110-01-437-7958
Ripping Chisel

014377958
232: RNCC: 3 | RNVC: 2
232 DASCO: RNCC: 5 | RNVC: 2
00018371002325: RNCC: 5 | RNVC: 2

24 Oct 1996

5110-01-437-7933
Craftsman's Knife

014377933
TE01-020: RNCC: 3 | RNVC: 2
TE01-020 TECHNI EDGE: RNCC: 5 | RNVC: 2

23 Oct 1996

5110-01-437-7879
Metal Cutting Hand Saw

014377879
300-01: RNCC: 3 | RNVC: 2

23 Oct 1996

5110-01-437-7880
Metal Cutting Hand Saw

014377880
100: RNCC: 3 | RNVC: 2

23 Oct 1996

5110-01-437-7878
Craftsman's Knife

014377878
TE03-990: RNCC: 3 | RNVC: 2
TE03-990 TECHNI EDGE: RNCC: 5 | RNVC: 2

23 Oct 1996

5110-01-437-5245
Hand Hacksaw Blade

014375245
70-877: RNCC: 3 | RNVC: 2
70-877: RNCC: 3 | RNVC: 9
70-877: RNCC: 5 | RNVC: 9

17 Oct 1996

5110-01-437-5260
Hand Hacksaw Blade

014375260
70-893: RNCC: 3 | RNVC: 2
70-893: RNCC: 3 | RNVC: 9
70-893: RNCC: 5 | RNVC: 9

17 Oct 1996

5110-01-437-5265
Hand Hacksaw Blade

014375265
70-871: RNCC: 3 | RNVC: 2
70-871: RNCC: 3 | RNVC: 9
70-871: RNCC: 5 | RNVC: 9

17 Oct 1996

5110-01-437-5253
Hand Hacksaw Blade

014375253
70-889: RNCC: 3 | RNVC: 2
70-889: RNCC: 3 | RNVC: 9
70-889: RNCC: 5 | RNVC: 9

17 Oct 1996

5110-01-437-5250
Hand Hacksaw Blade

014375250
70-885: RNCC: 3 | RNVC: 2
70-885: RNCC: 3 | RNVC: 9
70-885: RNCC: 5 | RNVC: 9

17 Oct 1996

5110-01-437-5258
Hand Hacksaw Blade

014375258
70-891: RNCC: 3 | RNVC: 2
70-891: RNCC: 3 | RNVC: 9
70-891: RNCC: 5 | RNVC: 9

17 Oct 1996

5110-01-437-5257
Hand Hacksaw Blade

014375257
70-883: RNCC: 3 | RNVC: 2
70-883: RNCC: 3 | RNVC: 9
70-883: RNCC: 5 | RNVC: 9

17 Oct 1996

5110-01-437-5254
Hand Hacksaw Blade

014375254
70-881: RNCC: 3 | RNVC: 2
70-881: RNCC: 3 | RNVC: 9
70-881: RNCC: 5 | RNVC: 9

17 Oct 1996

5110-01-437-5249
Hand Hacksaw Blade

014375249
70-879: RNCC: 3 | RNVC: 2
70-879: RNCC: 3 | RNVC: 9
70-879: RNCC: 5 | RNVC: 9

17 Oct 1996

5110-01-437-5241
Hand Hacksaw Blade

014375241
70-873: RNCC: 3 | RNVC: 2
70-873: RNCC: 3 | RNVC: 9
70-873: RNCC: 5 | RNVC: 9

17 Oct 1996

5110-01-437-3811
Scraping Knife

014373811
70-977: RNCC: 3 | RNVC: 2
70-977: RNCC: 3 | RNVC: 9
70-977: RNCC: 5 | RNVC: 9

10 Oct 1996

5110-01-437-3812
Scraping Knife

014373812
70-979: RNCC: 3 | RNVC: 2
70-979: RNCC: 3 | RNVC: 9
70-979: RNCC: 5 | RNVC: 9

10 Oct 1996

5110-01-437-3096
File Cleaning Brush

014373096
21455: RNCC: 3 | RNVC: 9
21455: RNCC: 5 | RNVC: 2

9 Oct 1996

5110-01-437-2610
Hand Metal Cutting Shears

8 Oct 1996

5110-01-437-2612
Hand Metal Cutting Shears

014372612
3918C: RNCC: 3 | RNVC: 9

8 Oct 1996

5110-01-437-2609
Hand Metal Cutting Shears

014372609
3919C: RNCC: 3 | RNVC: 9

8 Oct 1996

5110-01-437-2611
Hand Metal Cutting Shears

014372611
3910: RNCC: 3 | RNVC: 9

8 Oct 1996

5110-01-437-2606
Hand Metal Cutting Shears

014372606
3913C: RNCC: 3 | RNVC: 9

8 Oct 1996

5110-01-437-2608
Hand Metal Cutting Shears

8 Oct 1996

5110-01-437-2607
Hand Metal Cutting Shears

8 Oct 1996

5110-01-437-2605
Hand Metal Cutting Shears

014372605
3911C: RNCC: 3 | RNVC: 9

8 Oct 1996

5110-01-437-2184

7 Oct 1996

5110-01-437-2190
Hand Cold Chisel

014372190
70-347: RNCC: 3 | RNVC: 2
70-347: RNCC: 3 | RNVC: 9
70-347: RNCC: 5 | RNVC: 9

7 Oct 1996

5110-01-437-2047
Hand Optical Fiber Stripper

014372047
PWC25: RNCC: 3 | RNVC: 2

7 Oct 1996

5110-01-437-1963
File Handle

014371963
SGHF617AG: RNCC: 3 | RNVC: 2
HF617BL: RNCC: 5 | RNVC: 9
SGHF617G: RNCC: 5 | RNVC: 9

7 Oct 1996

5110-01-437-1911
File Handle

014371911
HF613BL: RNCC: 3 | RNVC: 2

7 Oct 1996

5110-01-437-0464
Hand Deburring Tool

014370464
52.170: RNCC: 3 | RNVC: 2
4291A14: RNCC: 5 | RNVC: 2

3 Oct 1996

5110-01-436-4135
Hand Metal Cutting Shears

18 Sep 1996

5110-01-436-4134
Hand Metal Cutting Shears

18 Sep 1996

NSN 5110-01-436-4132 014364132 PLIERS,DIAGONAL CUTTING

5110-01-436-4132
Diagonal Cutting Pliers

18 Sep 1996

5110-01-436-3561
Hand Cold Chisel

014363561
SV799050CT011: RNCC: 3 | RNVC: 2

17 Sep 1996

5110-01-435-7063
Metal Cutting Hand Saw

014357063
EH-50: RNCC: 3 | RNVC: 2

29 Aug 1996

5110-01-435-7062
Thread Restorer File

014357062
177-1: RNCC: 3 | RNVC: 2
177-1 GENERAL TOOL: RNCC: 5 | RNVC: 2
31236: RNCC: 5 | RNVC: 2
177-1: RNCC: 5 | RNVC: 9

29 Aug 1996

5110-01-435-7049
Hand Wire Stripper-Crimper

014357049
71: RNCC: 3 | RNVC: 9
71: RNCC: 5 | RNVC: 9

29 Aug 1996

5110-01-435-6988
Metal Cutting Hand Saw

014356988
EH-60: RNCC: 3 | RNVC: 2
EH-60 ESTWING: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-6903
Hand Diamond Point Chisel

014356903
CD432: RNCC: 3 | RNVC: 2
CD432 WILDE: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-6891
Hand Metal Cutting Shears

014356891
P167-B: RNCC: 3 | RNVC: 2
P167-B FIRST CHOICE TOOL: RNCC: 5 | RNVC: 2
00727226216731: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-6894
Hand Cape Chisel

014356894
CP1232: RNCC: 3 | RNVC: 2
CP1232 WILDE: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-6890
Hand Cold Chisel

014356890
CC1232: RNCC: 3 | RNVC: 2
CC1232 WILDE: RNCC: 5 | RNVC: 2

29 Aug 1996

5110-01-435-6864
End Cutting Nippers

29 Aug 1996

5110-01-435-6852
Hand Hacksaw Blade

014356852
62644: RNCC: 3 | RNVC: 9
62644 COOPER/NICHOLSON: RNCC: 5 | RNVC: 2
62644: RNCC: C | RNVC: 1

29 Aug 1996

Load More Results