What is Federal Supply Class 5110?

FSC 5110 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.

What is NATO Supply Classification Class 5110?

NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.

Which Federal Supply Group is FSC 5110 in?

FSC 5110 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5110 in?

NSC 5110 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

A Hand File (FILE,HAND) is excludes RASP, HAND.

What is a Coping Saw Blade?

A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.

What is a Hand Drill?

A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.

What is a Jeweler's Saw Blade?

A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.

What is a Corner Bit Brace?

A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Bit Brace?

A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.

What is a Ratchet Drill?

A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.

An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.

What is a Poising Saw?

A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.

What is a Bolt Cutter?

A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.

What is a Rabbet Plane?

A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.

What is a Pipe Cutter?

A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.

What is a Blacksmith's Chisel?

A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.

What is a Hand Metal Cutting Shears?

A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.

What is a Rivet Cutter?

A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.

What is a Nested Saws?

A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.

What is a Combination Plane?

A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.

What is a Framing Chisel?

A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.

What is a Turning Gouge?

A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.

What is a Fore Plane?

A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jack Plane?

A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Jointer Plane?

A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.

What is a Tinner's Hollow Cutting Punch?

A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.

What is a Miter Box And Saw?

A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.

What is an Exposed Blade Tube Deburring Tool?

An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.

What is an Enclosed Blade Tube Deburring Tool?

An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.

What is a Drilling Post?

A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.

What is a Pocket Knife?

A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.

What is a Chisel Bar?

A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.

What is a Craftsman's Knife?

A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.

What is a Hand Reamer?

A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.

What is a Valve Stem Guide Cleaner?

A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Dimpling Die?

A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.

What is a Spokeshave?

A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.

What is a Glass Cutter?

A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.

What is a Draw Knife?

A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.

What is an End Cutting Nippers?

An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.

What is a Circle Cutter?

A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.

What is an Edge Cutting Trimming Tool?

An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.

What is a Hand Wire Stripper?

A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.

What is a Hand Leather Stamping Die?

A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.

What is a Hand Metal Stamping Die?

A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.

A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.

What is a Wood Scraper?

A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.

Hand Tools, Edged, Nonpowered

Federal Supply Class (FSC): 5110

NATO Supply Classification Class (NSC): 5110

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 65 of 112

NSN Format for Hand Tools, Edged, Nonpowered

51	10	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5110 Hand Tools, Edged, Nonpowered

Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

Additional Information for Hand Tools, Edged, Nonpowered

NATO Supply Class 5110 refers to Hand Tools, Edged, Nonpowered. This class is a part of NATO Supply Group 51, which is dedicated to Hand Tools.

Hand Tools, Edged, Nonpowered (NSN 5110) includes a wide range of tools that have a cutting edge and are operated manually, without the need for power. These tools are commonly used in various industries, including construction, woodworking, metalworking, and general maintenance.

Some examples of hand tools in this class include:

1. Knives: Utility knives, pocket knives, and other types of cutting knives.
2. Scissors: Various types of scissors used for cutting fabric, paper, or other materials.
3. Shears: Larger cutting tools used for cutting metal, wire, or other heavy-duty materials.
4. Chisels: Tools with a sharp cutting edge used for carving or shaping wood, stone, or metal.
5. Blades: Replacement blades for utility knives or other cutting tools.
6. Rasps and Files: Tools used for shaping or smoothing surfaces by abrasion.
7. Scrapers: Tools used for removing paint, rust, or other unwanted materials from surfaces.

These hand tools are essential for many tasks that require precision cutting or shaping. They are designed to be operated by hand, providing flexibility and control to the user.

When referring to NATO Supply Class 5110, it is important to note that the classification system is used by NATO member countries for standardizing the identification and classification of military items. The NATO Stock Number (NSN) is a unique 13-digit identifier assigned to each item, ensuring compatibility and interoperability among NATO forces.

In summary, NATO Supply Class 5110 includes a variety of nonpowered hand tools with cutting edges. These tools are used in a wide range of industries and are an essential part of NATO Supply Group 51 for Hand Tools.

NSN by Country

US
United States
17281 Items

IT
Italy
8891 Items

UK
United Kingdom
4883 Items

CA
Canada
4825 Items

FR
France
4669 Items

DE
Germany
3881 Items

DK
Denmark
2145 Items

NO
Norway
2137 Items

AU
Australia
1541 Items

TR
Turkey
1339 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5110

What is Federal Supply Class 5110?: FSC 5110 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5110) in the USA for supply items codified in the category of Hand Tools, Edged, Nonpowered.
What is NATO Supply Classification Class 5110?: NSC 5110 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5110 in the USA) for supply items codified in the category of Hand Tools, Edged, Nonpowered.
Which Federal Supply Group is FSC 5110 in?: FSC 5110 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5110 in?: NSC 5110 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5110

What is a Hand File? 5267 Items: A Hand File (FILE,HAND) is excludes RASP, HAND.
What is a Coping Saw Blade? 56 Items: A Coping Saw Blade (BLADE,COPING SAW) is a thin narrow strip of steel with a continuous series of cutting teeth along one edge. The maximum over-all length is 6-3/4 inches (171.45 millimeters) and the maximum length is 6 inches (152.4 millimeters). Designed with pin or loop ends for attachment to a FRAME, COPING SAW. Used to cut sharp angles and/or curvesin metal or wood.
What is a Hand Drill? 95 Items: A Hand Drill (DRILL,HAND) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers, and the like. Only hand pressure is applied against a handle in its operation.
What is a Jeweler's Saw Blade? 32 Items: A Jeweler's Saw Blade (BLADE,JEWELER'S SAW) is a thin narrow strip of steel consisting of a rounded back and a continuous series of cutting teeth with a minimum of 27 points per inch along one edge. The maximum length is 5-1/4 inches (133.3 mm). It is hardened and tempered for use by jewelers in cutting various metals. The ends of the item are designed to be clamped into a FRAME, JEWELER'S SAW.
What is a Corner Bit Brace? 47 Items: A Corner Bit Brace (BRACE,BIT,CORNER) is see also BRACE, BIT, RATCHET and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Bit Brace? 40 Items: A Ratchet Bit Brace (BRACE,BIT,RATCHET) is see also BRACE, BIT, CORNER and BRACE, BIT, CLOSE QUARTER.
What is a Ratchet Drill? 18 Items: A Ratchet Drill (DRILL,RATCHET) is a hand powered rotary driving tool operated by applying pressure by a feed screw while rotating a drill by a ratchet head and handle.
What is an Adz? 48 Items: An Adz is an Axelike tool used for hewing, trimming, or similar operations in the rough-working of wood, ties, timber and the like. The body shall consist of a head and a rectangular eyehole. The blade shall be curved toward and at a right angle to the handle.
What is a Poising Saw? 29 Items: A Poising Saw (SAW,POISING) is a metal cutting saw with a maximum overall length of 3 inches (76.2 millimeters). It consists of a small blade inserted in a straight grip handle. The blade may have cutting teeth along one or both edges and is hardened and tempered for use by jewelers for enlarging slots in metallic balance screws.
What is a Bolt Cutter? 271 Items: A Bolt Cutter (CUTTER,BOLT) is a hand-held, hand-operated item designed to cut steel rod and the like. Excludes CUTTER, CABLE, HAND OPERATED; CUTTER, RIVET; and CUTTER, STEEL STRAPPING. For items having a shear cut and designed and rated to cut flat mild steel bar and/or soft wire rope, see CUTTER, WIRE ROPE, HAND OPERATED.
What is a Rabbet Plane? 40 Items: A Rabbet Plane (PLANE,RABBET) is an openside plane with the cutter blade set to an angle of approximately 45 degrees and extending to or a little beyond the open sides.
What is a Pipe Cutter? 199 Items: A Pipe Cutter (CUTTER,PIPE) is a hand-held, hand-operated tool used for cutting various types of pipe. Pipe cutters consist of a frame, feed rod with a handle, three or four cutter wheels, or one cutter wheel with two or four rollers, and pins on which the cutter wheels or rollers operate.
What is a Blacksmith's Chisel? 68 Items: A Blacksmith's Chisel (CHISEL,BLACKSMITH'S) is a metal cutting hand tool having a straight cutting edge on one end and a striking head on opposite end. It is designed with an eye, for use with a handle in cutting hot or cold metal.
Machete,Rigid Handle 47 Items
What is a Hand Metal Cutting Shears? 556 Items: A Hand Metal Cutting Shears (SHEARS,METAL CUTTING,HAND) is hand held and guided, manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition, it may include a series of levers and pins through which compound leverage may be accomplished. Cutting blades may be designed for cutting intricate patterns, right and/or left hand curves, straight cuts or a combination of circular and straight cuts. Used for cutting thin sheets and strips of metal. Excludes SHEARS, BENCH, HAND; CUTTER, STEEL STRAPPING and CUTTER, BOLT.
What is a Rivet Cutter? 22 Items: A Rivet Cutter (CUTTER,RIVET) is a hand operated plierlike tool having two shear plates drilled with various rivet diameters, fixed to two handles. In operation the shear plates are placed over the rivet and the handles are actuated by either a pull-apart or a squeeze type motion in shearing the rivet. See also CUTOFF AND BURRING TOOL, BLIND RIVET and CUTTER, BOLT.
What is a Nested Saws? 39 Items: A Nested Saws (SAWS,NESTED) is a wood and/or metal cutting handsaw, consisting of an open grip handle, and an assortment of two or more different removable blades of the following types: BLADE, KEYHOLE SAW; BLADE, COMPASS SAW; BLADE, PLUMBER'S SAW; BLADE, PRUNING SAW; and nail cutting saw blade.
What is a Combination Plane? 19 Items: A Combination Plane (PLANE,COMBINATION) is a plane consisting of a main stock with a sliding section to accommodate various types of form cutters.
What is a Framing Chisel? 28 Items: A Framing Chisel (CHISEL,FRAMING) is a wood cutting hand tool consisting of a straight steel blade from 7-1/2 inches (190.5 mm) to 8-1/2 inches (215.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed in a socket and may contain a striking cushion.
What is a Turning Gouge? 24 Items: A Turning Gouge (GOUGE,TURNING) is a woodcutting hand tool consisting of a straight blade, part of a circular arc in cross section with a rounded cutting edge. A nonmetallic handle at least 9 inches (228.6 mm) long is provided. Excludes GOUGE, WOODCARVING.
What is a Fore Plane? 12 Items: A Fore Plane (PLANE,FORE) is a plane, 18 inches (457.2 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jack Plane? 21 Items: A Jack Plane (PLANE,JACK) is a plane, 14 or 15 inches (355.6 or 381.0 millimeters) long, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Jointer Plane? 22 Items: A Jointer Plane (PLANE,JOINTER) is a plane, 22 to 24 inches (558.8 to 609.6 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
Punch,Cutting,Double Bow 413 Items
Punch,Cutting,Single Bow 303 Items
What is a Tinner's Hollow Cutting Punch? 93 Items: A Tinner's Hollow Cutting Punch (PUNCH,CUTTING,TINNER'S HOLLOW) is a hand punch with a straight round shank having a circular hollow cutting end in the form of a shoulder. It is designed to cut round holes in sheet metal by striking it a hammerlike blow.
What is a Miter Box And Saw? 21 Items: A Miter Box And Saw is a fixed or adjustable apparatus for guiding a SAW, MITER BOX when cutting a desired angle. It may include clamps for holding the material being cut. The item must include a SAW, MITER BOX or a SAW, BACK.
What is an Exposed Blade Tube Deburring Tool? 105 Items: An Exposed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,EXPOSED BLADE) is a cutting tool having a fluted, stepped body on one end and a straight shank, usually round with a squared drive, on the other end. In operation, the smaller portion of the body is inserted in the tube, until the blades contact the edges of the tube, and rotated with a T-handle tap wrench, or the like to remove the burrs from the inside and outside edges. See also DEBURRING TOOL, TUBE, INCLOSED BLADE.
What is an Enclosed Blade Tube Deburring Tool? 51 Items: An Enclosed Blade Tube Deburring Tool (DEBURRING TOOL,TUBE,ENCLOSED BLADE) is a tubular steel item having tapered reamer like blades fixed to its inside. In operation, it is placed over a tube and revolved by hand to remove burrs from the inside and outside surfaces. See also REAMER, HAND, and DEBURRING TOOL, TUBE, EXPOSED BLADE.
What is a Drilling Post? 21 Items: A Drilling Post (POST,DRILLING) is a round vertical steel rod fixed to a steel foot, and with a steel arm which can be raised or lowered manually by sliding it along the rod. The foot serves as a rest for the material to be drilled and the arm is used to center and hold a feed screw type drill when positioned for use.
What is a Pocket Knife? 358 Items: A Pocket Knife (KNIFE,POCKET) is a general purpose item which could be equipped with more than one blade. It shall be possible to open any of the blades with the remaining blades open or closed. A free rotating clevis may be attached.
What is a Chisel Bar? 37 Items: A Chisel Bar (BAR,CHISEL) is a chisel-like item 18 inches (457.2 millimeters) and over in length. Before using, refer to Reference Drawing Group AG.
What is a Pliers? 333 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Hardy? 26 Items: A Hardy is a metal cutting hand tool which has a chisel on one end and a square shank on the opposite end. It is designed to be inserted into a blacksmith's anvil for the purpose of cutting and trimming forgings.
What is a Craftsman's Knife? 572 Items: A Craftsman's Knife (KNIFE,CRAFTSMAN'S) is a hand tool used for cutting upholstery, rubber, leather and other non-metallic materials with or without detachable blades. It may be furnished with or without extra cutting blades.
What is a Hand Reamer? 4000 Items: A Hand Reamer (REAMER,HAND) is a cutting tool with a fluted body. When without handle, it has a straight round shank with squared end or a bit stock shank. It may have a T-handle, a ratchet handle or a round knurled handle. It is used for finishing to size, or enlarging, a previously formed hole. Excludes helical fluted taper pin type reamer items having a straight round shank with squared end and items with straight shanks covered under REAMER, MACHINE and COUNTERSINK.
What is a Valve Stem Guide Cleaner? 15 Items: A Valve Stem Guide Cleaner (CLEANER,VALVE STEM GUIDE) is a straight shank tool having flat wire blades set about a stem, designed for use by hand or with electric drills, for cleaning guides for valve stem. Excludes REAMER, HAND.
What is a Boiler Tube Cutter? 12 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Dimpling Die? 175 Items: A Dimpling Die (DIE,DIMPLING) is one of a pair of shaping tools, cylindrical in shape. A precision ground hole is centrally located in the body of the die. It is used in conjunction with a PUNCH, DIMPLING to form a countersink in thin metal for rivets, screws, and other fasteners.
What is a Spokeshave? 22 Items: A Spokeshave is a wood cutting hand tool consisting of an adjustable blade(s) no more than 2 1/8 inches (53.975 millimeters) wide with a straight and or curved cutting edge and a blade holder with raised or flat handles on each end. It is used in dressing curved surfaces. See also KNIFE, DRAW.
Reamer,Cylinder Ridge 48 Items
What is a Glass Cutter? 74 Items: A Glass Cutter (CUTTER,GLASS) is a hand-held, hand-operated tool used for cutting sheet or standard glass, plate glass, round gage-glass, corrugated glass, and heat resistant glass. This usually consists of a handle, an axle mounted at the front end of the head, a cutting wheel(s) and/or a ball knob for tapping. Cutters may include a thickness gauge machined into the head.
What is a Draw Knife? 17 Items: A Draw Knife (KNIFE,DRAW) is a wood cutting hand tool consisting of a blade 6 inches (152.4 millimeters) to 14 inches (355.6 millimeters) long, having a fixed or folding handle at each end. See also SPOKESHAVE.
What is an End Cutting Nippers? 336 Items: An End Cutting Nippers (NIPPERS,END CUTTING) is a plierlike hand tool having two opposing sharp edged jaws, each at right angles to the axis of the handles, actuated on a pivot or hinge to develop a cutting action.
What is a Circle Cutter? 93 Items: A Circle Cutter (CUTTER,CIRCLE) is a tool consisting of a pivot and an arm to which a cutter(s) is attached. It may be either a single cutter or a double cutter type for use in cutting out washers, gaskets and the like, by rotating the arm about the pivot. Excludes CUTTER, GLASS and CUTTING MACHINE, GLASS, HAND OPERATED.
File Holder 51 Items
What is an Edge Cutting Trimming Tool? 33 Items: An Edge Cutting Trimming Tool (TRIMMING TOOL,EDGE CUTTING) is a hand cutting tool having a blade with a cutaway edge of various designs at one end and a handle on the other end. It is designed for use in trimming the edges of leather, rubber and the like.
What is a Hand Wire Stripper? 607 Items: A Hand Wire Stripper (STRIPPER,WIRE,HAND) is a hand held, hand operated item designed to strip insulation from electric conductors. Excludes STRIPPER, CABLE, HAND.
What is a Hand Leather Stamping Die? 12 Items: A Hand Leather Stamping Die (DIE,LEATHER STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on leather.
What is a Hand Metal Stamping Die? 182 Items: A Hand Metal Stamping Die (DIE,METAL STAMPING,HAND) is an item, on the face of which is formed letter(s), number(s), or other character(s). It is used for marking imbedded impressions on metals.
What is a Gimlet? 68 Items: A Gimlet is a wood-boring hand tool with a crosshand handle having a pointed screw tip cutter for drawing it into the wood or other nonmetallic material. The bit is spiral shaped for cutting the hole and removing the chips. Excludes CORKSCREW.
What is a Wood Scraper? 64 Items: A Wood Scraper (SCRAPER,WOOD) is a hand tool consisting of a wood grip handle and blade(s) curved slightly outward across the width of the scraping edges, designed primarily for scraping wood in preparation of refinishing.
What is a Flexible Carbon Scraper? 19 Items: A Flexible Carbon Scraper (SCRAPER,CARBON,FLEXIBLE) is a hand tool consisting of a handle, in which is secured a layer of round spring steel wires. The wires forming a blade are bent downward near the tip and contain a sliding band for tensioning in scraping carbon off metal surfaces.
What is a Hand Graver? 48 Items: A Hand Graver (GRAVER,HAND) is an edged tool, shaped and sharpened at one or both ends and designed for manually incising, chasing or cutting lines, characters or designs into hard surfaces. Excludes KNIFE, ETCHING and turning and pivoting gravers. See also GRAVER SET, TURNING AND PIVOTING.
What is a Ship Scraper? 70 Items: A Ship Scraper (SCRAPER,SHIP) is excludes SCRAPER, SHAVE HOOK.
What is a Hand Masonry Drill Holder? 12 Items: A Hand Masonry Drill Holder (HOLDER,MASONRY DRILL,HAND) is an item designed to hold a fluted type DRILL, MASONRY, HAND. It may be provided with a rubber hand grip and/or rubber hand guard.
Cutter And Crimper,Flexible Armored Cable 14 Items
What is a Bearing Scraper? 209 Items: A Bearing Scraper (SCRAPER,BEARING) is a metal working hand tool consisting of a blade with one or two handles or a tang suitable for accommodating a handle. It is designed for removing metal by scraping flat and/or curved surfaces of metal bearings, for smoothing and alignment purposes. See SCRAPER SET, BEARING.
Saw,Coping 23 Items
What is a Jeweler's Broach? 22 Items: A Jeweler's Broach (BROACH,JEWELER'S) is a tapered hand tool with a square tang, having a diameter of 0.018 inch (0.46 mm) or larger, measured at approximately one (1) inch (25.4 mm) below the round section of the broach below the tang, designed for cleaning or enlarging holes in instruments, jewelry, cameras, optical goods, and the like. See also BROACH, JEWELER'S, PIVOT.
What is an Electricians' Scissors? 118 Items: An Electricians' Scissors (SCISSORS,ELECTRICIANS') is scissors having specially hard tempered cutting edges for cutting wire, insulation and light sheet metal. The blade backs have a scraper edge, file and/or wire scraping notch.
What is a Miter Box? 21 Items: A Miter Box is an apparatus for guiding a handsaw at the proper angles. Excludes MITER BOX AND SAW.
What is a Paring Gouge? 10 Items: A Paring Gouge (GOUGE,PARING) is a woodcutting hand tool consisting of a straight blade, part of an arc in cross-section with a square cutting edge. A nonmetallic handle may be provided. If with a straight shank, the blade is at least 6-3/4 inches (171.4 mm) long measured exclusive of shank. Excludes GOUGE, WOODCRAVING.
What is a Two Man Crosscut Saw? 28 Items: A Two Man Crosscut Saw (SAW,CROSSCUT,TWO MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber. A straight grip handle is set 90 degrees (1.5705 radians) to the cutting plane at each end of the blade.
What is a Crosscut Hand Saw? 132 Items: A Crosscut Hand Saw (SAW,HAND,CROSSCUT) is a handsaw consisting of a straight or skew back blade which is designed for cutting across the grain of wood. A double horned closed grip handle is fastened at the wide end. The cutting teeth are bevel filed.
What is a Rip Hand Saw? 79 Items: A Rip Hand Saw (SAW,HAND,RIP) is a handsaw consisting of a straight or skew back blade designed for cutting lumber with the grain. A double horned, closed grip handle is fastened at the wide end. The cutting teeth are filed straight across.
Saw,Keyhole 31 Items
What is a Back Saw? 49 Items: A Back Saw (SAW,BACK) is a woodcutting handsaw fitted with a reinforced back extending the full-length of the blade. The blade is of uniform width and is restricted to a width of over 2 inches (50.8 millimeters), but less than 4 inches (101.6 millimeters). See also SAW, DOVETAIL; and SAW, MITER BOX.
What is a Miter Box Saw? 18 Items: A Miter Box Saw (SAW,MITER BOX) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 4 inches (101.6 millimeters) or more. A handle of the closed grip type is attached at one end. Used with a miter box to make accurate angular and straight cuts. See also SAW, BACK; and SAW, DOVETAIL.
What is a Metal Cutting Hand Saw? 142 Items: A Metal Cutting Hand Saw (SAW,HAND,METAL CUTTING) is a metal cutting handsaw with a closed grip handle fastened at the wide end of a straight back blade. The unset cutting teeth on the blade are designed for cutting metal and are milled straight across.
What is a Dovetail Saw? 18 Items: A Dovetail Saw (SAW,DOVETAIL) is a woodcutting handsaw fitted with a reinforcing steel back extending the full length of the blade. The blade is of uniform width and is restricted to a width of 2 inches (50.8 millimeters) or less. A handle of the closed or straight grip type is attached at one end. See also SAW, BACK; and SAW, MITER BOX.
What is a Docking Hand Saw? 24 Items: A Docking Hand Saw (SAW,HAND,DOCKING) is a woodcutting saw consisting of a straight or skew back blade with 4-1/2 points per inch. A closed grip wood or metal handle is fastened at the wide end of the blade. The cutting teeth are bevel filed.
Saw,Compass 38 Items
What is an One Man Crosscut Saw? 16 Items: An One Man Crosscut Saw (SAW,CROSSCUT,ONE MAN) is a handsaw consisting of a toothed blade which is designed for cutting across the grain of timber, a closed grip handle securely fastened at the wide end of the blade, and a supplementary straight handle fastened at either the opposite end to the closed grip handle or on the same end. The supplementary handle is set 90 degrees to the cutting plane.
What is a Dimpling Punch? 130 Items: A Dimpling Punch (PUNCH,DIMPLING) is one of a pair of shaping tools, cylindrical in shape, having a precision ground straight shank and pilot. The pilot may or may not be integral with the body. It is used in conjunction with a dimpling die to form a countersink in thin metal for rivets and screws.
What is a Riffler? 79 Items: A Riffler is a file or rasp like tool usually having two curved cutting ends with a straight bar portion between which serves as a handle, but may have only one curved cutting end with a handle at the opposite end. The tool is used principally in depressions for shaping and finishing about irregular places. Excludes FILE, HAND and RASP, HAND.
What is a Hand Rasp? 340 Items: A Hand Rasp (RASP,HAND) is excludes FILE, HAND.
What is a Block Plane? 29 Items: A Block Plane (PLANE,BLOCK) is a plane with the cutting blade mounted between closed sides at an angle of 12 degrees or 20 degrees to the bottom.
Frame,Hand Hacksaw 142 Items
What is a Hand Hacksaw Blade? 426 Items: A Hand Hacksaw Blade (BLADE,HAND HACKSAW) is a narrow rectangular strip of steel 0.025 inch (0.63 mm) or less in thickness, with cutting teeth along one or both edges, (usually 6 to 14 inches (152.4 mm to 355.6 mm) long with 14 to 32 cutting teeth per inch) hardened and tempered for cutting various types of metals. The ends of the item are designed for attachment to a FRAME, HAND HACKSAW.
What is a Compass Saw Blade? 46 Items: A Compass Saw Blade (BLADE,COMPASS SAW) is a narrow strip of steel tapering to a point and having a series of cutting teeth along one edge. The width at the butt end must not exceed 1-3/8 inches (34.9 millimeters) nor be less than 1 inch (25.4 millimeters). Designed with accommodations at the butt end for attachment of a fixed or adjustable pistol grip handle. Used in woodworking for making curved or circular cuts.
What is a Plumber's Saw Blade? 41 Items: A Plumber's Saw Blade (BLADE,PLUMBER'S SAW) is a steel cutting tool with a continuous series of cutting teeth along one or both edges. Cutting teeth are hardened and tempered to cut through flooring, joists, and studs in which metallic objects are imbedded. Also designed for cutting such metallic items as soil pipe, lead pipe, and like items. The butt end has accommodations for attachment of a fixed or adjustable, open or closed grip handle.
What is a Keyhole Saw Blade? 19 Items: A Keyhole Saw Blade (BLADE,KEYHOLE SAW) is a narrow strip of flexible steel tapering to a point at one end and having a continuous series of cutting teeth along one edge. Width at the butt end must not be more than 1 inch (25.4 mm) nor less than 1/2 of aninch (12.7 mm). It is designed with accommodations at the butt end for attachment of a straight grip handle, pistol grip handle, or open grip handle.
What is a Doweling Jig? 21 Items: A Doweling Jig is a hand tool for holding and centering a metal guide, through which an auger bit passes, to assure accurate alignment of holes bored for dowels. The design provides for the use of various sizes of guides.
What is a Double Bit Ax? 23 Items: A Double Bit Ax (AX,DOUBLE BIT) is a tool used for chopping and splitting wood. The head of a double-bit ax shall have identical cutting blades or bits on both ends. These items shall be furnished fitted with straight handles.
What is a Mattock Head Ax? 20 Items: A Mattock Head Ax (AX,MATTOCK HEAD) is a type of ax having a single bit cutting edge with a mattock type head.
What is a Single Bit Ax? 203 Items: A Single Bit Ax (AX,SINGLE BIT) is a tool used for chopping and splitting wood. Also used for cleaning land of under brush. The head of a single-bit ax shall have a cutting bit or blade on one end and a flat or slightly conveyed rectangular surface defined as the "top face" on the opposite end. All single-bit axes shall be furnished with curved or straight wooden or fiberglass handles. For items with one blade and another working end such as a hammer, see HATCHET, as modified.
What is a Broad Hatchet? 47 Items: A Broad Hatchet (HATCHET,BROAD) is a hand tool primarily for use in maintenance and construction. The bit shall be beveled on one side only.
What is a Claw Hatchet? 11 Items: A Claw Hatchet (HATCHET,CLAW) is a hand tool primarily for use in maintenance and construction. The claw portion shall be either an inclined taper claw or a curved claw, and shall have a beveled slot suitable for drawing both headless and headed nails.
What is a Half Hatchet? 15 Items: A Half Hatchet (HATCHET,HALF) is a hand tool primarily for use in maintenance and construction. The near side of the head has a beveled slot suitable for drawing nails. The cutting edge width is between 3 inches (76.2 mm) and 3-3/4 inches (95.2 mm) wide. For items with smaller cutting edge width, see HATCHET, LATHING.
What is a Smooth Plane? 54 Items: A Smooth Plane (PLANE,SMOOTH) is a plane, not over 12 inches (304.8 millimeters) in length, with the cutting blade mounted between closed sides at an angle of approximately 45 degrees to the bottom.
What is a Breast Drill? 40 Items: A Breast Drill (DRILL,BREAST) is a hand held tool operated by turning a gear by hand and designed primarily as a driver for drills, reamers, augers and the like. Breast pressure is normally applied against a curved breast plate in its operation.
What is a Sheet Metal Ripping Cutter? 22 Items: A Sheet Metal Ripping Cutter (CUTTER,SHEET METAL RIPPING) is a chisel-like item having one plain end for driving and the other end bent at an angle and containing either an integral shaped cutting blade or a removable blade with a shaped cutting tip. In use it is held in the hand and struck with a hammer.
What is a Paring Chisel? 28 Items: A Paring Chisel (CHISEL,PARING) is a wood cutting hand tool used for carving, paring, turning, shaping, and finishing wood products. A nonmetallic handle is fixed to a tang or socket.
What is a Turning Chisel? 113 Items: A Turning Chisel (CHISEL,TURNING) is a wood cutting hand tool consisting of a steel blade from 6-3/4 inches to 8 inches long, and 1/8 inch to 2 inches wide. Cutting edge type shall be square, round, spear or skew.
What is a Firmer Gouge? 134 Items: A Firmer Gouge (GOUGE,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, part of a circular arc in cross-section, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket.
What is a Brick Chisel? 86 Items: A Brick Chisel (CHISEL,BRICK) is a chisel-like item having a straight cutting edge on one end, wider than the size of its shank, which may be straight or offset, and a plain end or striking head on opposite end. It is used in cutting brick, stone, tile and similar materials. Excludes CHISEL, FLOOR.
What is a Hand Cold Chisel? 666 Items: A Hand Cold Chisel (CHISEL,COLD,HAND) is a metal cutting hand tool less than 18 inches (457.2 mm) in length, having a straight, double beveled symmetrical cutting edge on one end, with cutting edge equal or greater than the distance between flats of stock. The opposite end contains a striking head.
Chisel,Bull Point,Hand 41 Items
What is a Hand Cape Chisel? 212 Items: A Hand Cape Chisel (CHISEL,CAPE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a double-beveled cutting edge ground on both sides to an included angle. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Diamond Point Chisel? 84 Items: A Hand Diamond Point Chisel (CHISEL,DIAMOND POINT,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The work end shall be tapered and square in cross section, providing either a single or double bevel, having a diamond shaped surface. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
What is a Hand Half Round Nose Chisel? 37 Items: A Hand Half Round Nose Chisel (CHISEL,HALF ROUND NOSE,HAND) is a steel, shock-resisting tool intended for cutting or chipping metals. The blade shall have a semicircular cutting edge with a single bevel. The body could be square, hexagonal, or octagonal in cross section. The opposite end contains a striking head.
Chisel,Oil Groove,Hand 19 Items
What is a Hand Rivet Buster Chisel? 15 Items: A Hand Rivet Buster Chisel (CHISEL,RIVET BUSTER,HAND) is excludes CHISEL, SIDE CUTTING, HAND.
What is a Hand Round Nose Chisel? 23 Items: A Hand Round Nose Chisel (CHISEL,ROUND NOSE,HAND) is a hand tool used for cutting or shaping metal, having a full circle single-beveled cutting edge. The opposite end contains a striking head. Excludes CHISEL, CAPE, HAND.
What is a Hand Side Cutting Chisel? 13 Items: A Hand Side Cutting Chisel (CHISEL,SIDE CUTTING,HAND) is it differs from CHISEL, RIVET BUSTER in that it has a single bevel cutting edge directly in line with the longitudinal axis of the chisel body. See also CHISEL, SPLITTING, HAND and SPLITTING TOOL, BUSHING, HAND.
What is a Bent Trimmers Shears? 48 Items: A Bent Trimmers Shears (SHEARS,BENT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grip is offset from the longitudinal axis but is in the same plane as the cutting blades.
What is a Straight Trimmers Shears? 155 Items: A Straight Trimmers Shears (SHEARS,STRAIGHT TRIMMERS) is shears with two sharp pointed blades or with one sharp pointed blade and one round pointed blade. The item has one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. The point of contact of the finger grips is on the longitudinal axis. Excludes SHEARS, TAILOR'S.
What is a Hand Bench Shears? 33 Items: A Hand Bench Shears (SHEARS,BENCH,HAND) is a manually operated shears, consisting essentially of two cutting blades, two handles, and an assembly bolt. In addition it may include a series of levers and pins through which compound leverage may be accomplished. One of the handles is bent at an approximately 90 degree angle to the shear plane and has a square end for use in a tinners bench plate. Exclude shears that are mechanically secured to the bench.
What is a Steel Strapping Cutter? 43 Items: A Steel Strapping Cutter (CUTTER,STEEL STRAPPING) is unlike Shears, items are designed for single cut operation, having a flat bottom jaw to fit between strapping, box and the like. Excludes CUTTER, BOLT.
What is an Embroidery Scissors? 31 Items: An Embroidery Scissors (SCISSORS,EMBROIDERY) is scissors with two sharp pointed, cutting blades. The overall length must not exceed 7 inches. Excludes SCISSORS, ELECTRICIANS' and SCISSORS, MANICURE.
What is a Ladies' Scissors? 53 Items: A Ladies' Scissors (SCISSORS,LADIES') is scissors with one sharp pointed blade and one round pointed blade.
What is a Pocket Scissors? 60 Items: A Pocket Scissors (SCISSORS,POCKET) is scissors with two blunt pointed blades.
What is a Pinking Shears? 18 Items: A Pinking Shears (SHEARS,PINKING) is hand held, manually operated shears, having a bent or straight pattern handle with one ring shaped grip, designed for a single finger, and one loop shaped grip, designed for two or more fingers. Its blades are patterned into wavy lines or a saw-toothed cutting edge, which in cutting, duplicate their pattern on the edge of a material. See also PINKING MACHINE.
What is a Hand Post Drill? 14 Items: A Hand Post Drill (DRILL,POST,HAND) is a hand drill-like item consisting of a geared drill with a column and adjustable slide table. In operation it is hand turned and self-fed. The entire assembly is fixed to a wood board for attaching to a post or wall. See also DRILLING POST AND RATCHET DRILL.
What is a Scraping Knife? 168 Items: A Scraping Knife (KNIFE,SCRAPING) is a hand tool with an edged blade fixed to a handle for scraping materials from surfaces.
What is a Thread Restorer File? 76 Items: A Thread Restorer File (FILE,THREAD RESTORER) is a hand tool for dressing damaged screw threads by a filing action. See also CHASER, THREAD, HAND and RESTORER, THREAD.
What is a Hand File Set? 283 Items: A Hand File Set (FILE SET,HAND) is two or more FILE, HAND of a single pattern, having different shapes, sizes, and/or cuts. It may contain separable handle(s) and/or a file cleaner brush.
What is a Hand Leather Stamping Die Set? 21 Items: A Hand Leather Stamping Die Set (DIE SET,LEATHER STAMPING,HAND) is a group of DIE, LEATHER STAMPING, HAND having different characteristics.
What is a Hand Metal Stamping Die Set? 250 Items: A Hand Metal Stamping Die Set (DIE SET,METAL STAMPING,HAND) is a group of DIE, METAL STAMPING, HAND having different characteristics.
What is a Hand Cold Chisel Set? 36 Items: A Hand Cold Chisel Set (CHISEL SET,COLD,HAND) is a group of CHISEL, COLD, HAND having different sizes.
What is a Firmer Chisel Set? 24 Items: A Firmer Chisel Set (CHISEL SET,FIRMER) is a group of CHISEL, FIRMER having different characteristics.
What is a Hand Metal Cutting Punch And Die Set? 46 Items: A Hand Metal Cutting Punch And Die Set (PUNCH AND DIE SET,METAL CUTTING,HAND) is a set consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with various sizes of matched punches and dies for insertion therein.
What is a Ripping Chisel? 13 Items: A Ripping Chisel (CHISEL,RIPPING) is a steel, chisel-like, wood cutting hand tool, from 11 inches (279.4 millimeters) to 18 inches (457.2 millimeters) long, having a straight cutting edge from 1-1/2 to 2-1/2 inches (38.1 to 63.5 millimeters) wide. It has a blade, with a nail pulling claw and or slot. See also CHISEL, FLOOR.
What is a Bearing Scraper Set? 22 Items: A Bearing Scraper Set (SCRAPER SET,BEARING) is a group of SCRAPER, BEARING having different characteristics.
Handle,Adz 17 Items
Handle,Double Bit Ax 11 Items
Handle,Hatchet 31 Items
Handle,Single Bit Ax 62 Items
What is a Chisel And Gouge Handle? 54 Items: A Chisel And Gouge Handle (HANDLE,CHISEL AND GOUGE) is excludes HANDLE, WOOD TURNING TOOL.
Reconditioning Tool,Piston Ring Groove 14 Items
What is a Rectangular Cutting Punch? 43 Items: A Rectangular Cutting Punch (PUNCH,CUTTING,RECTANGULAR) is a hand punch with a shank of any shape, having a hollow cutting end of rectangular shape, usually with semicircular ends, through which punchings will pass and be automatically discharged. It is designed to cut holes in leather, fabric and similar materials by striking it a hammerlike blow.
What is a Knockout Punch And Die? 328 Items: A Knockout Punch And Die (PUNCH AND DIE,KNOCKOUT) is a hand tool designed to punch a hole in sheet metal and the like, by forcing a punch through the material and into a supporting die by screw action. See also CUTTER, KNOCKOUT.
What is a Revolving Head Cutting Punch? 25 Items: A Revolving Head Cutting Punch (PUNCH,CUTTING,REVOLVING HEAD) is a plier like hand tool designed with several hollow tube punches assembled on a revolving head, used to cut holes in leather, rubber, fiber and similar materials, by forcing the punch through the work against an anvil or die.
What is a Floor Scraper? 13 Items: A Floor Scraper (SCRAPER,FLOOR) is a noncutting, rectangular bladed item, used primarily for scraping food, gum, and other foreign matter from floors. It is not designed to scrape paint or wood. See also SCRAPER, WOOD.
What is a Paper Cutter? 117 Items: A Paper Cutter (CUTTER,PAPER) is a hand instrument containing a sharp metal blade; the blade may be adjustable or may contain a Bevel Blade Holder so no adjustment is necessary. Is used for cutting drawing paper, bristol board, precision bevel, and straight mats by sliding the instrument along a T square or a straight edge. See also TRIMMER, PAPER, DROP, KNIFE.
What is a Handicraft Wood Carving Chisel Kit? 10 Items: A Handicraft Wood Carving Chisel Kit (CHISEL KIT,WOOD CARVING,HANDICRAFT) is a group of straight chisel(s), skew bevel chisel, and the like, designed to carve wood in the making of wood engravings and the like. See also CUTTER KIT, LINOLEUM BLOCK, HANDICRAFT.
What is a Tube Cutter? 332 Items: A Tube Cutter (CUTTER,TUBE) is excludes CUTTER, BOILER TUBE.
What is a Hand Cable Stripper? 298 Items: A Hand Cable Stripper (STRIPPER,CABLE,HAND) is a hand held, hand operated item specifically designed to strip insulation and outer coverings, such as lead or plastic sheathing from electric conductors. To prevent damage to the underlying insulation, it shall have an adjustable blade for proper depth of cut or a nonadjustable, hook type blade with a blunt nose provided in handle. See also STRIPPER, WIRE HAND.
What is a Woodcarving Gouge? 38 Items: A Woodcarving Gouge (GOUGE,WOODCARVING) is a hand tool used primarily by wood carvers, consisting of a blade having a curved cross section. It has a straight shank with a tanged end. See also GOUGE SET, WOODCARVING and GOUGE, FIRMER.
What is a Hand Metal Cutting Punch And Die? 35 Items: A Hand Metal Cutting Punch And Die (PUNCH AND DIE,METAL CUTTING,HAND) is an item consisting of a plierlike holder designed to hold a punch in one jaw and a die in the opposite jaw. It is furnished with only one punch and one die. For items furnished with more than one punch and more than one die, see PUNCH AND DIE SET, METAL CUTTING, HAND.
What is a Diagonal Cutting Pliers? 985 Items: A Diagonal Cutting Pliers (PLIERS,DIAGONAL CUTTING) is a nongripping, cutting tool having its cutting edges set at an angle to the handles, for cutting close to flat surfaces. See also PLIERS and PLIERS (as modified).
What is a Bench Wire Stripper? 14 Items: A Bench Wire Stripper (STRIPPER,WIRE,BENCH) is a bench mounted, hand-operated tool designed for stripping insulation from conductors. In operation, the wire is placed between two blades and the insulation removed by a cutting and pulling action.
What is a Hand Belt Cutter? 19 Items: A Hand Belt Cutter (CUTTER,BELT,HAND) is a hand-operated tool with an open end and a detachable blade used for cutting belting from rolls and for squaring belt ends preparatory to lacing. Does not cut metal stitched belt.
What is a Hand Operated Cable Cutter? 298 Items: A Hand Operated Cable Cutter (CUTTER,CABLE,HAND OPERATED) is an item specifically designed and rated to cut power, telephone, and other electric cable. See also CUTTER, WIRE ROPE, HAND OPERATED.
What is a Hand Operated Wire Rope Cutter? 184 Items: A Hand Operated Wire Rope Cutter (CUTTER,WIRE ROPE,HAND OPERATED) is an item specifically designed and rated to cut wire or wire rope. It may cut mild steel rod and the like. See also CUTTER, CABLE, HAND OPERATED.
What is a Hand Reamer Set? 104 Items: A Hand Reamer Set (REAMER SET,HAND) is a group of items under REAMER, HAND having different characteristics.
What is a Shave Hook Scraper? 35 Items: A Shave Hook Scraper (SCRAPER,SHAVE HOOK) is an item 9-1/2 inches (241.3 mm) or less in length. See also SCRAPER, SHIP.
What is a Razor Blade Glass Scraper? 19 Items: A Razor Blade Glass Scraper (SCRAPER,GLASS,RAZOR BLADE) is a hand tool designed to hold a razor blade in fixed or variable positions for cleaning and the like. It is furnished with at least one razor blade.
What is a Craftsman's Knife Set? 19 Items: A Craftsman's Knife Set (KNIFE SET,CRAFTSMAN'S) is a group of KNIFE, CRAFTSMEN'S having different characterisics.
What is a Pipe Cutter Cutting Wheel? 49 Items: A Pipe Cutter Cutting Wheel (CUTTING WHEEL,PIPE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, PIPE. Excludes tube cutter cutting wheels.
What is a Knockout Punch And Die Set? 60 Items: A Knockout Punch And Die Set (PUNCH AND DIE SET,KNOCKOUT) is a group of PUNCH AND DIE, KNOCKOUT having different characteristics.
What is a Woodworking Butt Chisel? 71 Items: A Woodworking Butt Chisel (CHISEL,BUTT,WOODWORKING) is a wood cutting hand tool consisting of a straight steel blade from 2-1/2 inches (63.5 mm) to 3-1/2 inches (88.9 mm) long, having a square cutting edge. A nonmetallic handle is fixed to a tang or socket and may contain a striking cushion.
What is a Firmer Chisel? 449 Items: A Firmer Chisel (CHISEL,FIRMER) is a wood-cutting hand tool consisting of a straight steel blade, generally less than 8 inches (203.2 mm) long, measured from the square cutting edge to the shoulder where the width of the blade is reduced. A nonmetallic handle is fixed to a tang or socket. Excludes CHISEL, BUTT, WOODWORKING.
What is a Tailor's Shears? 67 Items: A Tailor's Shears (SHEARS,TAILOR'S) is shears with one ring-shaped grip, designed for a single finger, and one loop-shaped grip, designed for two or more fingers. The point of contact of the finger grips is offset from the longitudinal axis but is in the same plane as the cutting blades. The loop-shaped finger grip is provided with a table rest. For items without a table rest, see SHEARS, BENT TRIMMERS.
What is a Chain Saw Filing Guide? 10 Items: A Chain Saw Filing Guide (FILING GUIDE,CHAIN SAW) is an item designed to hold a FILE, HAND to obtain the proper angle and depth when sharpening chain saws.
What is a Bow Saw? 74 Items: A Bow Saw (SAW,BOW) is a woodcutting handsaw consisting of an open arc type tubular steel frame. The removable blade which is fastened between ends of frame is held taut by frame tension. The frame is used as a handle and may extend below the blade.
Jaws,Bolt Cutter 55 Items
What is a Tube Cutter Cutting Wheel? 58 Items: A Tube Cutter Cutting Wheel (CUTTING WHEEL,TUBE CUTTER) is the knife-edged, cutting component of a wheel type CUTTER, TUBE. Excludes CUTTING WHEEL, PIPE CUTTER.
What is a Woodworking Butt Chisel Set? 12 Items: A Woodworking Butt Chisel Set (CHISEL SET,BUTT,WOODWORKING) is a group of woodworking butt chisels of various sizes.
What is a Double Bow Cutting Punch Set? 24 Items: A Double Bow Cutting Punch Set (PUNCH SET,CUTTING,DOUBLE BOW) is a group of double bow cutting punches having different characteristics.
What is an Auger Handle? 19 Items: An Auger Handle (HANDLE,AUGER) is a replacement item formed and shaped to fit the tubular metallic crosspiece of a posthole digger.
What is a File Handle? 295 Items: A File Handle (HANDLE,FILE) is a tubular item for attachment to a FILE, HAND. The small end of the item shall be equipped with a metal ferrule, collet or the like to prevent it from splitting when the tang end of the file is inserted into the item. It shall be drilled axially to half its length with a hole to accept the tang end of the file.
Handle,Saw 41 Items
What is a Hand Optical Fiber Stripper? 56 Items: A Hand Optical Fiber Stripper (STRIPPER,OPTICAL FIBER,HAND) is an hand-held, hand-operated item designed to remove the buffer from FIBER, OPTIC without nicking or damaging the conductor. To remove the buffer chemically, see BARING COMPOUND, OPTICAL FIBER.
What is a Hand Optical Fiber Cleaving Tool? 65 Items: A Hand Optical Fiber Cleaving Tool (CLEAVING TOOL,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to cut optical fibers by a scribe and break process.
Blade,Bow Saw 27 Items
What is a Knife Blade? 326 Items: A Knife Blade (BLADE,KNIFE) is a detachable steel blade made to fit a handle and designed for a specific task.
What is a Metal Cutter Blade? 12 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
Cutter Bit,Plane 47 Items
What is a Cutting Punch Insert? 68 Items: A Cutting Punch Insert (INSERT,PUNCH,CUTTING) is an item forming a cutting punch together with a shank. The insert is the cutting end of the cutting punch.
What is a Nozzle Broach? 18 Items: A Nozzle Broach (BROACH,NOZZLE) is a hand tool with a handle. It is designed for cleaning nozzles.
Blade Set,Reamer 113 Items
What is a Screw Thread Insert Breaker? 43 Items: A Screw Thread Insert Breaker (BREAKER,SCREW THREAD INSERT) is an item which is used to break the driver of a screwthread insert after mounting.
What is a Hand Valve Seat Rotary Tool? 16 Items: A Hand Valve Seat Rotary Tool (ROTARY TOOL,VALVE SEAT,HAND) is an item which is designed for driving a lathe tool through a gearbox. the valve seats are processed by removing segmental chip. a guidance and lathe tools can be included.
What is a Cable Stripper Blade? 54 Items: A Cable Stripper Blade (BLADE,CABLE STRIPPER) is a replacement cutter for a STRIPPER, CABLE, HAND.
What is a Cable Stripper Blade Set? 11 Items: A Cable Stripper Blade Set (BLADE SET,CABLE STRIPPER) is a matching pair of BLADE, CABLE STRIPPER, for those tools which require two cutters.
What is a Wire Stripper Blade Set? 59 Items: A Wire Stripper Blade Set (BLADE SET,WIRE STRIPPER) is two or more matching BLADE, WIRE STRIPPER,for those tools which require more than one cutter.
What is a Wire Stripper Blade? 67 Items: A Wire Stripper Blade (BLADE,WIRE STRIPPER) is a replacement cutter for a STRIPPER, WIRE, as modified.
What is a Hand Stencil Cutting Die Set? 12 Items: A Hand Stencil Cutting Die Set (DIE SET,STENCIL CUTTING,HAND) is a set of hand tools, on the face of which is formed letter(s), numbers(s), or other character(s). It is used to perforate a thin sheet of plastic, metal or cardboard for use as a stencil.
What is a Hand Operated Cable Cutter Blade? 25 Items: A Hand Operated Cable Cutter Blade (BLADE,CUTTER,CABLE,HAND OPERATED) is a device which has either cutting teeth or a sharp cutting edge on one side. The item is designed to be inserted in a holding device. It is a component of cutter, cable.
What is a Pocket Folding Multi-Tool? 211 Items: A Pocket Folding Multi-Tool (MULTI-TOOL,FOLDING,POCKET) is a folding multi-purpose pocket tool which may contain a combination of the following: plain and/or serrated blade(s), plier head, metal file, can opener, bottle opener, wire cutters/stripper, ruler, wood saw, screwdrivers, and the like. Excludes KNIFE, POCKET.
What is a Fireman's Strap Cutting Knife? 22 Items: A Fireman's Strap Cutting Knife (KNIFE,STRAP CUTTING,FIREMAN'S) is an item designed with a curved blade and a handle, used to cut straps.
Blade,Scraper 165 Items
Handle,Knife Blade 19 Items
What is a Finger Grip Hand Saw? 18 Items: A Finger Grip Hand Saw (SAW,HAND,FINGER GRIP) is a spiral, straight end saw blade with a handle housing and attached ring handle at each end. The saw blade is attached to the ring handles by thumbscrews. It is designed to cut plastic, wood, and steel.
What is a Line Cutter? 16 Items: A Line Cutter (CUTTER,LINE) is a hand tool with a protected blade used by parachutists, divers, and the like, to safely cut shroud lines, lines, smal diameter ropes, and the like, when the lines become entangled.
What is a Scraping Knife Set? 16 Items: A Scraping Knife Set (KNIFE SET,SCRAPING) is a group of KNIFE,SCRAPING having different characteristics.

Stock Items From Supply Class 5110 Page 65of 112

5110-15-000-1803
Hand Operated Cable Cutter

150001803
BM 576: RNCC: 3 | RNVC: 2

7 Feb 2013

5110-15-218-4759
Tranciarivetti

152184759
AT501R: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-120-3927

5110-21-862-5286
Surform Plane Blade

218625286
294B: RNCC: 3 | RNVC: 2

13 May 1971

5110-66-149-9385
Craftsman's Knife

661499385
NO PRIMARY REF 66-149-9385: RNCC: 3 | RNVC: 2
07645701: RNCC: 5 | RNVC: 2

10 Apr 2003

5110-27-014-5886
Hand File

270145886
NF-1603: RNCC: 2 | RNVC: 1
NF1603: RNCC: 2 | RNVC: 1
NF1603: RNCC: 2 | RNVC: 1

11 Nov 2002

5110-99-297-8608
Pocket Knife

992978608
NO PRIMARY REF 99-297-8608: RNCC: 3 | RNVC: 2
736-024: RNCC: 5 | RNVC: 2

31 May 2011

5110-15-236-4997
Scalpello Da Murato

152364997
40742: RNCC: 3 | RNVC: 2
511015E104564: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-21-639-3186
Hand Metal Cutting Shears

216393186
M3: RNCC: 3 | RNVC: 2
V19S: RNCC: 3 | RNVC: 2
39GP33: RNCC: 4 | RNVC: 1
REVM: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-14-202-9505
Glass Cutter

142029505
4797: RNCC: 3 | RNVC: 2
100TER: RNCC: 3 | RNVC: 2
0714 70 11: RNCC: 5 | RNVC: 2

1 Jan 1963

5110-17-124-5267
Pocket Folding Multi-Tool

171245267
850222.MULTI TOOL MUT: RNCC: 3 | RNVC: 2

2 Oct 2012

5110-21-886-7130
Dimpling Punch

218867130
ZT1723: RNCC: 3 | RNVC: 2

9 Nov 1981

5110-99-120-0877
Bolt Cutter Blade

991200877
H528: RNCC: 2 | RNVC: 2
FA11501: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-120-0906
Hole Cut Centre Pin

991200906
H5715: RNCC: 2 | RNVC: 2
FA11559: RNCC: 6 | RNVC: 9
H5715: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-639-4260
Hand File

216394260
39GP30: RNCC: 4 | RNVC: 1
REVB: RNCC: 5 | RNVC: 9
1F58650: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-21-639-4067
Hatchet Handle

216394067
554: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-15-208-7747
Alesatore

152087747
3AANGERMLN24X27-5X90: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-13-103-1022
Chisel Bar

131031022
2230: RNCC: 3 | RNVC: 2

31 Mar 1977

5110-21-859-0554
Hand Hacksaw Blade

218590554
31E1218: RNCC: 3 | RNVC: 2

14 May 1970

5110-14-289-1043

5110-14-287-8398
Hand Metal Stamping Die

142878398
NT92-01JUIN51P0INC0N8-3MM: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-287-8398: RNCC: 3 | RNVC: 2
NT92-01JUIN51P0INC0N8-3MM: RNCC: 5 | RNVC: 9

1 Jan 1972

5110-15-123-2169
Scalpello X Fal.Con

151232169
8254-18: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-66-019-7350
Hand Reamer

660197350
HAND REAMER: RNCC: 3 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-98-205-7859
Hand File

982057859
DFAMPD02350: RNCC: 2 | RNVC: 2

5 Sep 2002

5110-15-165-3689
Scalpello Per Legno

151653689
6056312: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-37-526-2930
Scraping Knife

375262930
100-1583: RNCC: 3 | RNVC: 2

27 Jun 2013

5110-21-842-8171

5110-99-224-0786

5110-27-014-9007
Single Bow Cutting Punch

270149007
5110ATFD0119: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-13-104-4805
File Hand Mill

131044805
30413253700060: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-20-000-4245
Single Bit Ax Handle

200004245
B1033605: RNCC: 3 | RNVC: 2

26 Sep 2002

5110-15-219-2606
Se Lime Con Manico

152192606
LIMECONMANICO: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-126-3218
Hand Wire Stripper

121263218
3418C: RNCC: 3 | RNVC: 2
1072254: RNCC: 5 | RNVC: 2
107225: RNCC: 5 | RNVC: 9
3418CN: RNCC: 5 | RNVC: 9

30 May 1969

5110-14-244-0870

5110-15-210-1644
Matrice Esagonale

152101644
9786: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-102-3170
Expansion Rea Pilot

211023170
MBB: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-14-490-8664
Foret

144908664
4053 010 000 716: RNCC: 3 | RNVC: 2
F300 0T 000 4902: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-17-700-9930
Firmer Gouge

177009930
1312.12: RNCC: 3 | RNVC: 2

16 May 1970

5110-99-173-0783
Hand Reamer

991730783
ST7: RNCC: 3 | RNVC: 2

28 Nov 1997

5110-21-116-2829
Bolt Cutter

211162829
167: RNCC: 3 | RNVC: 2
1-167: RNCC: 3 | RNVC: 2
1-167: RNCC: 5 | RNVC: 2
5-1150: RNCC: 6 | RNVC: 9
5-1150: RNCC: 6 | RNVC: 9

4 Jun 1968

5110-21-853-8033
Bucksaw Blade

218538033
15: RNCC: 3 | RNVC: 1
5110-0036: RNCC: 6 | RNVC: 9

23 May 1969

5110-98-102-2112
Hand Hacksaw Blade

981022112
250MM 18TPI BI-METAL: RNCC: 3 | RNVC: 1
1018 RABONE: RNCC: 3 | RNVC: 2
FH1018 ECLIPSE HICUT: RNCC: 6 | RNVC: 9

1 Jun 1990

5110-22-610-1694
Hand Reamer

226101694
V3503-10: RNCC: 3 | RNVC: 2

14 Apr 2005

5110-22-619-3137
Ax Holder

226193137
91006: RNCC: 3 | RNVC: 2

17 Jun 2009

5110-27-054-6527
Bicak

270546527
05001FB0205: RNCC: 2 | RNVC: 2

5 Oct 2011

5110-66-086-8307
Hand Reamer

660868307
652 3582: RNCC: 3 | RNVC: 2

23 Aug 1976

5110-14-380-4785
Retractabl Tranchet

143804785
FD1921: RNCC: 3 | RNVC: 2
595201: RNCC: 5 | RNVC: 2

29 Nov 1982

5110-15-208-4945
Serie Punzoni

152084945
NOREF511015R557693: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-215-3999
Forbici Elettricist

152153999
296B0001: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-639-4293
Hand File

216394293
39GP30: RNCC: 4 | RNVC: 1
REVB: RNCC: 6 | RNVC: 9

9 Aug 1966

5110-99-910-4150
Instrument Broach

999104150
DEF1198: RNCC: 4 | RNVC: 1
FA10544: RNCC: 6 | RNVC: 9
9104150: RNCC: 6 | RNVC: 9
1A3998: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4284
Hand Masonry Drill

999104284
TL45REVD: RNCC: 4 | RNVC: 1

4 Feb 1984

5110-21-883-1785
Hand File

218831785
39GP30: RNCC: 4 | RNVC: 1
GGGF325: RNCC: 4 | RNVC: 1

18 Feb 1981

5110-12-368-1634
Razor Blade Glass Scraper

123681634
10356: RNCC: 3 | RNVC: 2
74270005: RNCC: 5 | RNVC: 2

15 Dec 2005

5110-15-165-3809
Lima Per Meccanica

151653809
256134: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-120-0945
Wood Scraper Blade

991200945
H5340: RNCC: 2 | RNVC: 2
1C5441: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-14-244-3706

5110-99-866-8403

5110-99-601-0894
Hand Reamer

5110-99-942-0163

5110-99-942-0280

5110-15-138-1399
Lima Ad Ago Triango

151381399
991002: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-15-138-0794
Troncabulloni

151380794
195005: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-21-896-7007
Hand File

218967007
916036: RNCC: 3 | RNVC: 2
TSB8: RNCC: 5 | RNVC: 2
AMDUTOOLCONTROL: RNCC: 6 | RNVC: 9

12 Aug 1984

5110-66-149-3471
Pocket Scissors

661493471
NO PRIMARY REF 66-149-3471: RNCC: 3 | RNVC: 2
9752324: RNCC: 5 | RNVC: 2

3 Apr 2003

5110-98-205-9638
Hand Metal Stamping Die Set

982059638
DFAMPD03217: RNCC: 2 | RNVC: 2

27 Nov 2003

5110-99-432-8974

5110-99-432-8764

5110-99-432-8929

5110-99-009-1472
Hand Reamer

990091472
H6: RNCC: 3 | RNVC: 2

29 Jan 1998

5110-15-217-3040
Archetto

152173040
8001483: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-146-8697
Digitiser

661468697
19396080114: RNCC: 3 | RNVC: 2

20 Sep 2000

5110-15-190-9005
Matrice Esagonale

151909005
9778: RNCC: 3 | RNVC: 2

1 Mar 2010

5110-12-383-2653
Diagonal Cutting Pliers

123832653
TC42: RNCC: 3 | RNVC: 2

30 Sep 2010

5110-14-244-3691

5110-12-140-9241
Hand Rasp

121409241
6: RNCC: 3 | RNVC: 2
164: RNCC: 5 | RNVC: 2

30 May 1969

5110-66-013-5884
Hand File

660135884
R0UND10IN: RNCC: 3 | RNVC: 1
ROUND 10: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-12-350-3206
Hand Reamer

123503206
106: RNCC: 3 | RNVC: 2

15 Mar 2000

5110-99-120-0456
Firmer Gouge

991200456
H5590: RNCC: 2 | RNVC: 2
30Q70001: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-124-8365
Alesatore Cilindric

151248365
7730-8-00: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-192-2147
Shears

151922147
H7-137: RNCC: 3 | RNVC: 2

2 Mar 2010

5110-14-409-5243
Pliers

144095243
60001000: RNCC: 3 | RNVC: 2
60-001-000: RNCC: 5 | RNVC: 2
RB2015M: RNCC: 5 | RNVC: 2

28 May 1986

5110-27-010-6577
Hand File

270106577
99999-NIIN-DA0037254: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-12-356-5271
Hand File

123565271
12371: RNCC: 3 | RNVC: 2

7 Mar 2002

5110-14-218-7415

5110-99-841-5564

5110-12-385-2924
Oval Cutting Punch

123852924
50.000.117: RNCC: 3 | RNVC: 2

18 May 2011

5110-14-490-8843
Alesoir

144908843
4067 010 000 312: RNCC: 3 | RNVC: 2
F300 0T 000 5115: RNCC: 6 | RNVC: 9

8 Oct 1997

5110-21-639-4406
Hand File

216394406
39GP30: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-21-639-4168
Hand File

216394168
39GP30: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-12-329-8801
Hand Reamer

123298801
HSS012011-1: RNCC: 3 | RNVC: 2

8 Oct 1992

5110-22-614-1329
Pliers

226141329
502031365: RNCC: 3 | RNVC: 2

26 Sep 2006

5110-22-619-3157
Tube Cutter

226193157
32935: RNCC: 3 | RNVC: 2

18 Jun 2009

5110-21-639-4887
Hand File

216394887
39GP53: RNCC: 4 | RNVC: 1

2 Sep 1964

5110-27-019-8376
Hand Cape Chisel

270198376
10091KISK0015: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-186-5856
Punzoni Belzer

151865856
3019100: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-13-113-7525
Jeweler's Broach

131137525
30544-70: RNCC: 3 | RNVC: 2

13 Mar 1990

5110-99-942-0277

5110-21-639-4860
Hand File

216394860
39GP53: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-21-866-3170
Single Bow Cutting Punch

218663170
500SIZE2A: RNCC: 3 | RNVC: 2

19 May 1972

5110-21-639-4321
Hand File

216394321
912967: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1
REVB: RNCC: 6 | RNVC: 9

4 Jun 1968

5110-99-432-8924

5110-15-211-7947
Utensile Per Filett

152117947
20X20X160: RNCC: 5 | RNVC: 3
20X20X160: RNCC: 5 | RNVC: 9

16 Nov 2005

5110-12-331-9242
Hand Cape Chisel

123319242
101/6: RNCC: 3 | RNVC: 2
70030006: RNCC: 5 | RNVC: 2

7 Jul 1993

5110-14-201-1125
Single Bow Cutting Punch

142011125
4637-6: RNCC: 3 | RNVC: 2
153-6: RNCC: 3 | RNVC: 9
107-6: RNCC: 5 | RNVC: 9

1 Jan 1962

5110-99-434-1661
Reamer

994341661
NO PRIMARY REF 99-434-1661: RNCC: 3 | RNVC: 2
565102: RNCC: 5 | RNVC: 2

19 Mar 1990

5110-27-055-4944
Knife Blade

270554944
E52-16-0240: RNCC: 5 | RNVC: 9

8 Dec 2011

5110-14-244-0740

5110-15-217-7561
Sega Da Pavimento

152177561
CS1P10: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-137-8219

5110-25-112-6432

5110-21-637-5639
Reamer Blade Set

216375639
25: RNCC: 3 | RNVC: 2

25 May 1968

5110-99-428-9623

5110-99-201-9271

5110-66-016-5087
Recess Cutter

660165087
124005: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-21-104-9828
Hand Cold Chisel

211049828
C12B: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-21-893-1740
Belt Punch

218931740
4842012295: RNCC: 3 | RNVC: 2

10 Dec 1983

5110-14-323-9109

5110-21-109-1520

5110-21-868-1503

5110-15-144-6800
Punteruoli A Punta

151446800
344-8X100: RNCC: 3 | RNVC: 2
344002: RNCC: 3 | RNVC: 2

11 Dec 1996

5110-12-131-4709
Hand Reamer

121314709
131.13.000: RNCC: 3 | RNVC: 2
131-13-000: RNCC: 5 | RNVC: 2
700-2HC: RNCC: 5 | RNVC: 2

30 May 1969

5110-15-193-2670
Coltello Multiuso

151932670
FX-447 COD: RNCC: 3 | RNVC: 2
(241)AG180FX-447COD: RNCC: 5 | RNVC: 2

26 Apr 2010

5110-22-625-3879
Diagonal Cutting Pliers

226253879
0714015559611: RNCC: 3 | RNVC: 2

22 May 2013

5110-41-002-1439
Hand Reamer

410021439
3300007001: RNCC: 3 | RNVC: 2

20 Dec 2012

5110-20-004-7605
Pipe Cutter

200047605
WSW716: RNCC: 3 | RNVC: 2

21 Apr 2009

5110-99-910-5906
Blacksmith's Chisel Set

999105906
H2318: RNCC: 2 | RNVC: 2
FA16850: RNCC: 6 | RNVC: 9
H2318: RNCC: 6 | RNVC: 9
1A438: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-054-1407
Handsaw Jointer

150541407
5631-4: RNCC: 3 | RNVC: 2

2 Apr 1971

5110-25-101-5775

5110-25-106-1250
Ringpaknin Hullpipe

5110-22-221-4815
Smooth Plane

222214815
PUDS HOEVL 51MM: RNCC: 3 | RNVC: 2

18 Oct 1971

5110-15-219-4384
Lima Mezzotonda Dol

152194384
07146141: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-377-6088
Hand Cable Stripper

123776088
3363 0887 07: RNCC: 3 | RNVC: 2

28 Jan 2009

5110-22-221-3915
Hand File

222213915
192-7: RNCC: 3 | RNVC: 2

14 Dec 1972

5110-22-616-4694
Tube Cutter

226164694
500055035: RNCC: 3 | RNVC: 2

21 Jan 2008

5110-14-244-0833

5110-15-221-4729
Martello

152214729
EX5110RI7422039: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-310-4975
Socle Decoupage

143104975
568-5-9: RNCC: 3 | RNVC: 2

1 Jan 1974

5110-12-135-7771
Hand File

121357771
DIN7262-D200-2: RNCC: 2 | RNVC: 2
1231200: RNCC: 3 | RNVC: 2
1231-200-2: RNCC: 3 | RNVC: 2
D200-2DIN7262: RNCC: 5 | RNVC: 2
1231-200-2: RNCC: 5 | RNVC: 2
B200EINHIEB2DIN8336: RNCC: 5 | RNVC: 9
DIN7262D200-2: RNCC: 5 | RNVC: 9

30 May 1969

5110-21-807-1476
Hand Reamer

218071476
B174-2: RNCC: 3 | RNVC: 1
B94-2: RNCC: 3 | RNVC: 1
712-048313: RNCC: 3 | RNVC: 2
B5-14: RNCC: 5 | RNVC: 1
4503 5-32: RNCC: 5 | RNVC: 2
50-10929: RNCC: 5 | RNVC: 9

26 Jun 1964

5110-27-040-1802
Hand File

270401802
1O" KUT: RNCC: 2 | RNVC: 1

10 Jan 2008

5110-14-212-2227
Valve Stem Guide Cleaner

142122227
584-10: RNCC: 3 | RNVC: 9
MUL584-10: RNCC: 5 | RNVC: 9

1 Jan 1964

5110-15-218-4742
Morsetto

152184742
5250G125: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-876-0164
Hand Metal Stamping Die

218760164
1587: RNCC: 3 | RNVC: 1
1H1587: RNCC: 3 | RNVC: 1
1567T131: RNCC: 3 | RNVC: 2

19 Apr 1977

5110-15-230-8369
Tenaglie

152308369
199/225: RNCC: 3 | RNVC: 2
511015E153742: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-14-323-9075

5110-21-868-1783
Ice Ax

218681783
ASCHENBRENNER: RNCC: 3 | RNVC: 1
ASCHENBRENNERICEAXE: RNCC: 3 | RNVC: 1

15 Dec 1972

5110-15-149-7082
Lame Mobile

151497082
LM3000SC: RNCC: 3 | RNVC: 2
EM05030: RNCC: 5 | RNVC: 2

7 May 1999

5110-21-105-0074
Hand Metal Stamping Die

211050074
309418: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-99-910-5122
Gimlet

5110-99-910-5109

5110-15-208-4856
Cesoia

152084856
4KTSCNDX250: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-308-7729
Diagonal Cutting Pliers

123087729
E3156: RNCC: 3 | RNVC: 2
3110152: RNCC: 3 | RNVC: 2
2646R: RNCC: 3 | RNVC: 9
130470: RNCC: 5 | RNVC: 2
3110152: RNCC: 5 | RNVC: 9

14 Nov 1986

5110-15-138-1293
Spaccadadi

151381293
490003: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-12-122-2499
Hand Reamer

121222499
8SPIRALGENUTET: RNCC: 3 | RNVC: 2

30 May 1969

5110-21-868-1788

5110-21-807-1174
Ladies' Scissors

218071174
816: RNCC: 3 | RNVC: 2

19 Apr 1967

5110-25-117-2511

5110-12-361-7406
Drilling Post

123617406
2608180003: RNCC: 3 | RNVC: 2
BS35: RNCC: 5 | RNVC: 2

11 Nov 2003

5110-15-139-0923
Lama Per Taglierina

151390923
LMM 115: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-21-105-3204
Edge Cutting Trimming Tool

211053204
126: RNCC: 3 | RNVC: 1
311265: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-22-624-6879
Hand File

226246879
728: RNCC: 3 | RNVC: 2

10 Dec 2012

5110-12-131-3084

5110-15-176-2736
Confezione 10 Lame

151762736
017720015: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-208-4755
Lima Ago Triangolo

152084755
3LPKTRAGMDN140: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-12-126-3249
Hand File Set

121263249
NO PRIMARY REF 12-126-3249: RNCC: 3 | RNVC: 2
100X3DIN8342: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-165-3691
Scalpello Da Mm 300

151653691
36021300: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-99-469-6205
Hand Reamer

994696205
1G523: RNCC: 3 | RNVC: 2

18 Jan 1977

5110-22-616-1567
Hand Operated Wire Rope Cutter

226161567
01-5051801: RNCC: 3 | RNVC: 2

20 Nov 2007

5110-15-134-4424
Lama Per Metallo Cm

151344424
40118: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-99-910-5291
Rigger Knife

999105291
H1528: RNCC: 3 | RNVC: 2

25 Apr 1991

5110-99-910-4157
Instrument Broach

999104157
DEF1198: RNCC: 4 | RNVC: 1
1A4005: RNCC: 6 | RNVC: 9
FA10551: RNCC: 6 | RNVC: 9
9104157: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-859-2324
Scraper Blade

218592324
62B: RNCC: 3 | RNVC: 1
13-20794: RNCC: 5 | RNVC: 2

18 Jun 1970

5110-12-347-0452
Pipe Cutter

123470452
008140001: RNCC: 3 | RNVC: 2

15 Oct 1998

5110-21-759-0006

5110-15-215-5775
Chiave Idraulica 60

152155775
301005: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-108-5649
Tube Cutter Cutting Wheel

171085649
PIJPSNIJWIEL SPEC: RNCC: 3 | RNVC: 2
PIJPSNIJWIEL SPEC: RNCC: 5 | RNVC: 9

6 Dec 1994

5110-99-773-4751
Chisel

997734751
EKA 20985: RNCC: 3 | RNVC: 2
08020019013: RNCC: 5 | RNVC: 2

25 Nov 2008

5110-15-210-3979
Alesatrice Normale

152103979
EX5110RI2615554: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-12-023-0150

5110-25-102-9905
Hand File

251029905
14SBF5110HVK2: RNCC: 2 | RNVC: 1
FS 5110-0641 POS 5: RNCC: 2 | RNVC: 2
329DC: RNCC: 3 | RNVC: 2
48300150: RNCC: 5 | RNVC: 2
N6Q25803: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-13-103-2500
Ratchet Bit Brace

131032500
5772B: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-13-103-2521
Pipe Cutter

131032521
ALARMNR1: RNCC: 3 | RNVC: 2

1 Apr 1975

5110-27-000-8056
Single Bow Cutting Punch

270008056
5700 24 0017: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-21-874-4732
Hand Reamer

218744732
7353: RNCC: 3 | RNVC: 2

8 Feb 1977

5110-15-003-9344
Diagonal Cutting Pliers

150039344
182797607: RNCC: 3 | RNVC: 2
(241)A0199182797607: RNCC: 5 | RNVC: 2

4 Dec 2013

5110-15-162-1063
Batticarne A Palett

151621063
1326: RNCC: 3 | RNVC: 2

20 Feb 2001

5110-15-221-4755
Trancia

152214755
EX5110RI7420024: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-221-5205
Alesatore

152215205
EX5110VI7000213: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-016-5095
Recess Cutter

660165095
124002: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-66-013-5833
Hand File

660135833
913807: RNCC: 3 | RNVC: 2
07091504: RNCC: 5 | RNVC: 2
TRIANGULARSAWFILE: RNCC: 5 | RNVC: 9

1 Jan 1968

5110-15-209-0278
Tronchese

152090278
2668B: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-866-8558

5110-99-432-9020

5110-99-910-9986
Hand Reamer

5110-21-906-2552
Straight Trimmers Shears

219062552
410C-650: RNCC: 3 | RNVC: 2

27 Sep 1991

5110-15-217-7311
Coltello Di Salvata

152177311
43VA: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-99-206-1394

5110-99-198-9114
Hand File Set

5110-15-230-5798
Cesoia Sinistrorsa

152305798
1124/250: RNCC: 3 | RNVC: 2
511015E126427: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-27-000-8055
Single Bow Cutting Punch

270008055
5700 24 0016: RNCC: 3 | RNVC: 2

11 Jun 1991

5110-20-004-4918
Hand Optical Fiber Stripper

200044918
CPT2-AB-X: RNCC: 3 | RNVC: 2

15 Jan 2009

5110-25-133-0193

5110-25-105-7599

5110-21-639-4200
Hand File

216394200
908673: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-66-024-4237
Hand Masonry Drill

660244237
731 0023: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5110-15-208-4975
Scalpello

152084975
3SANMMPPZ160X20: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-14-215-0216

5110-21-883-1882
Hand File

218831882
39GP30: RNCC: 4 | RNVC: 1

24 Feb 1981

5110-14-244-3672

5110-99-812-3749

5110-15-218-1065
Spazzola Per Lime

152181065
HB34: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-210-4802
Scalpello

152104802
EX5110RN0407257: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-211-6294
Forbice Universale

152116294
ART.1452010: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-33-205-2715
Diagonal Cutting Pliers

332052715
6.477: RNCC: 3 | RNVC: 2
CF-33FCI0524: RNCC: 5 | RNVC: 2

13 Jul 2006

5110-15-122-8003
Preformed Packing

151228003
216-2649: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-218-0235
Spazzola Per Lime

152180235
731151: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-910-4867

5110-66-018-3660
File Handle

660183660
07187900: RNCC: 3 | RNVC: 2
07187900: RNCC: 5 | RNVC: 2
07187900: RNCC: 5 | RNVC: 2

1 Jan 1968

5110-15-171-1354
Tagliatubi In Rame

151711354
A0251000: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-98-200-1508
Slasher Handle

982001508
RIVAL 36IN.: RNCC: 3 | RNVC: 2

14 Feb 1986

5110-15-188-3342
Hand Metal Cutting Shears

151883342
02030003: RNCC: 3 | RNVC: 2
203 CN: RNCC: 5 | RNVC: 2
25964: RNCC: 5 | RNVC: 2
391241122407: RNCC: 6 | RNVC: 9

2 Sep 2009

5110-12-360-1800
Knife Blade

123601800
99.70: RNCC: 3 | RNVC: 2

14 Apr 2003

5110-21-639-6392
Ship Scraper

216396392
S10: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-66-113-5231
Hand Cape Chisel

661135231
DMS 206: RNCC: 4 | RNVC: 1

20 Feb 1982

5110-21-639-4856
Hand File

216394856
39GP53: RNCC: 4 | RNVC: 1

27 Jun 1966

5110-15-208-4584
Alesatore

152084584
3AANFCFMEQ21: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-8191
Fustella

152088191
3FANCNSE16: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-013-5910
Hand File

660135910
SQUAREFILE: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-22-608-7146
Hole Saw

226087146
4213210140: RNCC: 3 | RNVC: 2

13 Nov 2004

5110-17-102-6340
Hand Reamer

171026340
GR 15523: RNCC: 3 | RNVC: 2

3 Nov 1988

5110-37-555-7893
Plier

375557893
010 306 000201: RNCC: 5 | RNVC: 1

22 Mar 2004

5110-98-205-5372
Hand File

982055372
DFAMPD00254: RNCC: 2 | RNVC: 2

5 Mar 2001

5110-15-193-2406
Lama Tranciafili

151932406
504177077: RNCC: 3 | RNVC: 2
(241)A4249504177077: RNCC: 5 | RNVC: 2

22 Apr 2010

5110-14-401-5193
Tube Cutter

144015193
NO PRIMARY REF14-401-5193: RNCC: 3 | RNVC: 2
238-63: RNCC: 5 | RNVC: 2

13 Jun 1985

5110-27-010-7444
Hand Reamer

270107444
99999-NIIN-DA0036176: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-99-277-2230
Saw Blade

992772230
TL-502-903: RNCC: 3 | RNVC: 2
TL-502-903: RNCC: 3 | RNVC: 9

25 Sep 2008

5110-99-780-2893
Ratchet Bit Brace

997802893
144/10 MKV: RNCC: 3 | RNVC: 2
STA14410 MK5: RNCC: 5 | RNVC: 2

25 Apr 1991

5110-21-637-5591
Hand Reamer

216375591
CRITCHLEYANGLEBLADE: RNCC: 3 | RNVC: 1
1F108035: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-22-618-2534
Craftsman's Knife

226182534
0714 662 12: RNCC: 3 | RNVC: 2

12 Nov 2008

5110-12-316-7905
Craftsman's Knife Set

123167905
26: RNCC: 3 | RNVC: 2
07L136: RNCC: 5 | RNVC: 2
26,21: RNCC: 5 | RNVC: 2
26,00: RNCC: 5 | RNVC: 2

14 Feb 1989

5110-25-122-8753

5110-25-102-1252

5110-15-173-0669
Tagliatubi Beta 334

151730669
0334001: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-21-639-4829
Hand File

216394829
FF469L: RNCC: 3 | RNVC: 2
39GP53: RNCC: 4 | RNVC: 1
82035: RNCC: 5 | RNVC: 2

27 Jun 1966

5110-12-344-5862
End Cutting Nippers

123445862
6202120: RNCC: 3 | RNVC: 2
6201120: RNCC: 5 | RNVC: 2
4003773047995: RNCC: 5 | RNVC: 2
6201120: RNCC: 5 | RNVC: 9

11 Nov 1997

5110-66-150-2985
Hand Metal Stamping Die Set

661502985
NO PRIMARY REF 66-150-2985: RNCC: 3 | RNVC: 2
06929800: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-15-213-8384
Lima Tonda Mezzo Do

152138384
09900024: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-121-5549
Knife

221215549
410: RNCC: 3 | RNVC: 2

25 May 1990

5110-14-283-6120
Canif

142836120
1417: RNCC: 3 | RNVC: 2

1 Jan 1972

5110-15-171-1351
Pinza Regolabile Vb

151711351
A0121240: RNCC: 1 | RNVC: 2

1 Jun 2003

5110-15-230-3949
Pialletto In Metall

152303949
5732: RNCC: 3 | RNVC: 2
511015E060153: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-98-851-7360
Hand File

988517360
MILLSAW 2SE 300MM WILTSHIRE: RNCC: 3 | RNVC: 1
12 IN MILL SECOND: RNCC: 3 | RNVC: 1
FD101L STUBS: RNCC: 6 | RNVC: 9

2 Dec 1976

5110-14-204-8810

5110-15-220-5909
Lama Grande Unifix

152205909
LAMAUNIFIXG: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-66-019-7366
Hand Reamer

660197366
HAND REAMER: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-13-102-8815
Hand File

131028815
NBN496A5-200B1: RNCC: 2 | RNVC: 2

1 Apr 1975

5110-21-639-4054
Single Bit Ax Handle

216394054
555: RNCC: 3 | RNVC: 1
39GP10: RNCC: 4 | RNVC: 1
5110-0806: RNCC: 6 | RNVC: 9

4 Jun 1968

5110-12-174-5280
Hand Cape Chisel

121745280
C3645-150: RNCC: 3 | RNVC: 2

5 Jul 1978

5110-12-362-5184
Diagonal Cutting Pliers

123625184
54.0084.960.60: RNCC: 3 | RNVC: 2
2646A: RNCC: 5 | RNVC: 2

4 Mar 2004

5110-22-608-8992
Knife Blade

226088992
8833: RNCC: 3 | RNVC: 2

30 Nov 2004

5110-25-130-2570
Boelgel Flensebakke

5110-15-134-5616
Apparecchio Per Tag

151345616
2959: RNCC: 3 | RNVC: 2

9 Oct 1996

5110-17-700-9846
Firmer Chisel

177009846
1111.04: RNCC: 3 | RNVC: 2

14 May 1970

5110-66-013-7613
Hand Reamer

660137613
HAND REAMER: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-99-433-4706

5110-99-136-8662

5110-12-311-2910
Isolierungs Halter

123112910
109.42: RNCC: 3 | RNVC: 2
109.42: RNCC: 5 | RNVC: 2
4018062: RNCC: 5 | RNVC: 2
030065: RNCC: 5 | RNVC: 9
10942: RNCC: 5 | RNVC: 9
10953: RNCC: 5 | RNVC: 9
857829031: RNCC: 5 | RNVC: 9
18062: RNCC: 5 | RNVC: 9

13 Aug 1987

5110-21-807-1197
Pipe Cutter

218071197
45: RNCC: 3 | RNVC: 1
451DNYS: RNCC: 5 | RNVC: 9
45IDNYS: RNCC: 5 | RNVC: 9

9 Jun 1964

5110-33-000-1549

5110-25-128-9259
Hullsag

5110-14-293-2528
Hand Leather Stamping Die

142932528
NT92-01JUIN51P0INC0N6-8MM: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-293-2528: RNCC: 3 | RNVC: 2
NT92-01JUIN51P0INC0N6-8MM: RNCC: 5 | RNVC: 9

1 Jan 1973

5110-99-432-8842

5110-99-432-8899

5110-14-526-3041
Exposed Blade Tube Deburring Tool

145263041
D9850M1207: RNCC: 3 | RNVC: 2

18 Jul 2001

5110-15-165-3961
Serie Punzoni Lette

151653961
30293: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-21-807-1133

5110-99-701-2313
Hand Reamer

5110-99-910-4239
Firmer Chisel

999104239
DEF STAN 51-11:PART 27-H424: RNCC: 2 | RNVC: 2
H424: RNCC: 3 | RNVC: 2
DEF STAN 51-11:PART 27: RNCC: 5 | RNVC: 2
H424: RNCC: 6 | RNVC: 9
910-4239: RNCC: 6 | RNVC: 9
FA11326: RNCC: 6 | RNVC: 9
1A418: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-99-910-4225
Firmer Chisel

999104225
BS1943: RNCC: 4 | RNVC: 1
DEF STAN 51-11:PART 27: RNCC: 4 | RNVC: 1
TABLE1A: RNCC: 6 | RNVC: 9
BS1943-TABLE1A: RNCC: 6 | RNVC: 9
FA11288: RNCC: 6 | RNVC: 9
H410: RNCC: 6 | RNVC: 9
1A391: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-15-063-0259
Punzone Speciale

150630259
06-002-01: RNCC: 3 | RNVC: 2

2 Dec 1982

5110-21-851-2142
Hand File

218512142
5110-0403: RNCC: 3 | RNVC: 2
374.000: RNCC: 5 | RNVC: 9

2 Aug 1968

5110-14-201-7235

5110-14-421-6282
Outillage Gravure

144216282
0437-400000: RNCC: 3 | RNVC: 2

20 Jan 1988

5110-41-001-5644
Hand Cold Chisel

410015644
251532: RNCC: 3 | RNVC: 2

23 Sep 2010

5110-14-577-7346
Scraper Blade

145777346
0940400100-69101: RNCC: 3 | RNVC: 2

8 Oct 2013

5110-15-216-2558
Raspa

152162558
5110RN0401856: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-22-621-1887
Tube Cutter

226211887
5609203: RNCC: 3 | RNVC: 2
4028001052: RNCC: 5 | RNVC: 2

19 Aug 2010

5110-15-208-4638
Fustelle In Acciaio

152084638
3FANGRF04: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-25-150-2666
Nozzle Scraper

251502666
20879: RNCC: 3 | RNVC: 2

21 Feb 1997

5110-21-639-3190
Wire Stripper Blade

216393190
L4420: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-99-517-4888

5110-12-376-6837
Hand Hacksaw Blade

123766837
0603 301 13: RNCC: 3 | RNVC: 2
A060330113: RNCC: 5 | RNVC: 2
392381211600: RNCC: 6 | RNVC: 9
48181: RNCC: 6 | RNVC: 9

28 Oct 2008

5110-12-140-8026
Hand File

121408026
DIN7264-D250-2: RNCC: 2 | RNVC: 2
1404252: RNCC: 3 | RNVC: 2
4B250ZAHNUNG2: RNCC: 5 | RNVC: 9
295-250-2: RNCC: 5 | RNVC: 9
C250X2DIN8344: RNCC: 5 | RNVC: 9

30 May 1969

5110-99-611-8302

5110-21-105-2022
Single Bow Cutting Punch

211052022
150: RNCC: 3 | RNVC: 1

6 Jun 1968

5110-21-109-8265
Rigi Carbon Scraper

211098265
C308262: RNCC: 3 | RNVC: 2

6 Jun 1968

5110-21-105-1197
Hand File

211051197
39GP53: RNCC: 4 | RNVC: 1
GGGF331: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-21-639-4290
Hand File

216394290
39GP30: RNCC: 4 | RNVC: 1
HS04: RNCC: 5 | RNVC: 2
REVB: RNCC: 6 | RNVC: 9

24 Feb 1969

5110-14-301-4109

5110-17-032-1056
Hand Ruimer

5110-12-382-2017
Hand Reamer

123822017
572315: RNCC: 3 | RNVC: 2

20 May 2010

5110-22-222-6742
Hand File

222226742
230-4MGR: RNCC: 3 | RNVC: 2
OEBERG 230: RNCC: 5 | RNVC: 2
FIL: RNCC: 5 | RNVC: 9
72-0826-1: RNCC: 6 | RNVC: 9

11 Mar 1981

5110-15-192-9878
Giratubi Svedesi 90

151929878
3760055: RNCC: 3 | RNVC: 2
(241)AD7823760055: RNCC: 5 | RNVC: 2

31 Mar 2010

5110-21-807-1395
Dimpling Die

218071395
4G500F2: RNCC: 3 | RNVC: 2

5 Feb 1964

5110-14-237-7641

5110-66-130-0233
Hand File

661300233
29003: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
29003: RNCC: 5 | RNVC: 2

17 Aug 1987

5110-15-216-3376
Scalpello Per Marte

152163376
89065: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-071-3391
Linea Mezza Tonda

150713391
1014Y137: RNCC: 3 | RNVC: 2

31 Dec 1978

5110-21-889-5873
Pott Throwing Stick

218895873
TS2: RNCC: 3 | RNVC: 2

18 Jul 1982

5110-17-706-1248
Hand Operated Wire Rope Cutter

177061248
5041421: RNCC: 3 | RNVC: 2
5041421: RNCC: 5 | RNVC: 9

14 May 1970

5110-99-219-4618
Hand Reamer

992194618
H10: RNCC: 3 | RNVC: 2

29 Jan 1998

5110-15-186-2569
Taglierina Per Lami

151862569
071464141: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-37-525-4435
Folding Handgrip

375254435
BYGDS675: RNCC: 3 | RNVC: 2

29 Jan 2013

5110-99-719-8797

5110-21-639-4401
Hand File

216394401
911781: RNCC: 3 | RNVC: 2
39GP30: RNCC: 4 | RNVC: 1
JANF1088: RNCC: 4 | RNVC: 1

4 Jun 1968

5110-22-304-0488
Hss Haand Rival

19 Oct 1974

5110-14-254-0454

5110-99-401-9905

5110-12-126-1477
Hand Reamer

121261477
NO PRIMARY REF 12-126-1477: RNCC: 3 | RNVC: 2
7DIN206SSSPIRALGENUTET: RNCC: 5 | RNVC: 9

30 May 1969

5110-15-165-3791
Lima Per Meccanica

151653791
256014: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-22-613-6437
Flat Chisel

226136437
812352: RNCC: 3 | RNVC: 2

6 Jul 2006

5110-15-218-4879
Lame In Confezione

152184879
F35230: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4632
Man Alesatore Fisso

152084632
3AAXFCFMEQ2: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-977-8288
Riffler

999778288
NO PRIMARY REF 99-977-8288: RNCC: 3 | RNVC: 2
PE76: RNCC: 5 | RNVC: 2
3AP4743: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-21-637-6965
Hand Reamer

216376965
353H: RNCC: 3 | RNVC: 1

25 May 1968

5110-98-205-9636
Back Saw

982059636
DFAMPD03215: RNCC: 2 | RNVC: 2

27 Nov 2003

5110-15-216-4146
Serie Di Triangoli

152164146
SERIETRIANGOLI: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4704
Lima

152084704
3LCNT0CNBSN350: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-17-042-7816
Hand File

170427816
12111000: RNCC: 3 | RNVC: 2

22 Jul 1973

5110-15-123-7682
I Stampi Traforati

151237682
3679-2-15: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-15-208-3507
Tronchese

152083507
3TANFDTILIL150: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-99-705-6415
Retaining Wire Punc

997056415
MC1275252: RNCC: 3 | RNVC: 2

20 May 2002

5110-14-244-0894

5110-14-244-0922

5110-99-454-1917
Hand Pattern Graver

5110-32-084-4132
Steel Strapping Cutter

320844132
2200005194: RNCC: 3 | RNVC: 2

12 Aug 2010

5110-12-386-2796
Diagonal Cutting Pliers

123862796
50.000.098: RNCC: 3 | RNVC: 2

22 Aug 2011

5110-12-120-5688

5110-12-320-0722
Rivet Cutter

123200722
500: RNCC: 3 | RNVC: 2

5 Dec 1989

5110-20-004-5488
Ladies' Scissors

200045488
SHD39: RNCC: 3 | RNVC: 2

9 Feb 2009

5110-15-104-1008
Lima

151041008
8094421: RNCC: 3 | RNVC: 2

30 May 1989

5110-99-618-7390

5110-99-138-3424
Hydrau Nut Splitter

991383424
316: RNCC: 3 | RNVC: 2
316: RNCC: 6 | RNVC: 9

25 Apr 1991

5110-98-104-2097
Knife Blade

5110-99-717-2091

5110-98-105-8755
Hand Reamer

5110-25-100-6605
Knockout Punch And Die

251006605
NO PRIMARY REF25-100-6605: RNCC: 3 | RNVC: 2
1728-0801: RNCC: 5 | RNVC: 2

1 Jan 1984

5110-21-111-1296
Hand Reamer

211111296
SE1793: RNCC: 3 | RNVC: 2
370SE1793: RNCC: 5 | RNVC: 2
SE1847-6: RNCC: 5 | RNVC: 2
MT752673: RNCC: 5 | RNVC: 9

6 Jun 1968

5110-14-258-1337
Abat-Carre

142581337
747-3: RNCC: 3 | RNVC: 2

1 Jan 1969

5110-15-137-9539
Cesoia Lama Stretta

151379539
1114020: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-66-013-6865
Hand File

660136865
SQUARE4IN: RNCC: 3 | RNVC: 1

1 Jan 1968

5110-66-064-4893
Tinner's Hollow Cutting Punch

10 Jan 1974

5110-17-110-7353
Hand Ruimer

5110-66-010-8509
Poppet Valve Reamer

5110-99-456-1369
Marking Scissors

994561369
NO PRIMARY REF 99-456-1369: RNCC: 3 | RNVC: 2
D1DA5475: RNCC: 5 | RNVC: 2

15 Oct 1980

5110-15-215-7757
Roncola Tipo Sardeg

152157757
R340-130: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-21-859-0555
Hand Hacksaw Blade

218590555
31E1224: RNCC: 3 | RNVC: 2
RS1224: RNCC: 5 | RNVC: 2
962749: RNCC: 5 | RNVC: 2
RS1224: RNCC: 5 | RNVC: 2

14 May 1970

5110-15-230-5573
Scalpello Per Murat

152305573
1701PM: RNCC: 3 | RNVC: 2
511015E082089: RNCC: 5 | RNVC: 9

19 Jul 2007

5110-99-709-4616

5110-14-288-5695
Electricians' Scissors

142885695
123-11ELECTR0NICIEN: RNCC: 3 | RNVC: 9
123-11: RNCC: 5 | RNVC: 2

1 Jan 1972

5110-14-351-7947

5110-98-104-7229
Bearing Scraper

5110-66-131-0990

5110-98-105-8810

5110-99-492-9243
Hand Saw

994929243
2-20-528: RNCC: 3 | RNVC: 2
MESH FS/462/12/01: RNCC: 6 | RNVC: 9

12 Apr 2006

5110-17-112-9086
Hand Reamer

171129086
P926-0,6150-0,5000: RNCC: 3 | RNVC: 2
P926: RNCC: 6 | RNVC: 9

12 Nov 1999

5110-99-715-2718

5110-27-015-5534
Hand File

270155534
14001YP21612: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-27-018-5165
Hand File

270185165
14001YP21659: RNCC: 2 | RNVC: 1

15 Nov 2003

5110-15-195-0975
Hand Cold Chisel Set

151950975
PKNC300: RNCC: 3 | RNVC: 2
(241)A5200PKNC300: RNCC: 5 | RNVC: 2

25 Feb 2011

5110-21-639-5964
Hand Metal Stamping Die Set

216395964
1300: RNCC: 3 | RNVC: 1
101: RNCC: 3 | RNVC: 1
GGGD280: RNCC: 4 | RNVC: 1
31600: RNCC: 5 | RNVC: 2
1F144000: RNCC: 6 | RNVC: 9
313418: RNCC: 6 | RNVC: 9

6 Jun 1968

5110-21-116-2167

5110-21-112-7268

5110-66-139-2634
Rigid Handle Machete

661392634
5110-66-011-5819: RNCC: 3 | RNVC: 2

18 Jul 1994

5110-98-205-8504
Hand File Set

982058504
DFAMPD03061: RNCC: 2 | RNVC: 2

6 Mar 2003

5110-15-165-3960
Forbice Modello Pes

151653960
1784175: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4049
Scalpello Per Elett

151654049
361025: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-165-4311
Lampadine Di Ricamb

151654311
322C2R: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-216-2831
Pinza Tubi Freni

152162831
1469: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-15-208-4692
Alesatore Cilindric

152084692
3AANFCFMEQ6: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-318-2539

5110-21-105-1222
Hand File

211051222
39GP53: RNCC: 4 | RNVC: 1

6 Jun 1968

5110-21-801-0948

5110-21-885-2050
Hand File

218852050
39-GP-53: RNCC: 4 | RNVC: 1

2 Jun 1981

5110-25-121-6597
Hand Reamer

251216597
9992400: RNCC: 3 | RNVC: 2
BV202N: RNCC: 6 | RNVC: 9

1 Jan 1984

5110-15-176-6302
Segaccio Manico In

151766302
5445-600: RNCC: 3 | RNVC: 2

14 Feb 2004

5110-15-208-4504
Alesatore

152084504
3AARGERMCN18X21X65: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-17-117-9999
Uitsteekmes

171179999
LISTA 80.920: RNCC: 3 | RNVC: 2

19 Oct 2005

5110-17-117-9971
Reservebeitel

171179971
289.V2 FACOM: RNCC: 3 | RNVC: 2

19 Oct 2005

5110-99-540-2023

5110-15-123-2756
Filo Da Muratore In

151232756
ART25126: RNCC: 3 | RNVC: 2

8 Oct 1996

5110-66-149-8113
Bolt Cutter

661498113
NO PRIMARY REF 66-149-8113: RNCC: 3 | RNVC: 2
07496907: RNCC: 5 | RNVC: 2

9 Apr 2003

5110-15-216-4471
Cesoia Sinistra

152164471
ART-1111: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-186-0918
Lama Per Tornire Si

151860918
9731G-28: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-57-441-1247
Hand Cold Chisel

574411247
2810-0187 KD21.XR GOST 7211-86: RNCC: 2 | RNVC: 2
2810-0187 KD21.XR GOST 7211-86: RNCC: 3 | RNVC: 2

8 Nov 2012

5110-15-208-5364
Sega

152085364
3NANCNAHYNNP1000: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-25-102-2186
Craftsman's Knife

251022186
127MM: RNCC: 5 | RNVC: 1

1 Jan 1984

5110-14-510-9839
Tube Cutter

145109839
334.32NX: RNCC: 3 | RNVC: 2
334.32NX: RNCC: 5 | RNVC: 2
0167535: RNCC: 5 | RNVC: 2

25 Nov 1998

5110-27-014-8933
Hand Reamer

270148933
3455ATF16418: RNCC: 2 | RNVC: 1

10 Dec 2002

5110-99-521-1073

5110-99-209-5418

5110-99-538-2716

5110-99-767-2867
Scraper Blade Set

997672867
AK524: RNCC: 3 | RNVC: 2

7 Nov 2006

5110-12-316-7907
Knife Blade

123167907
28: RNCC: 3 | RNVC: 2
07L1367: RNCC: 5 | RNVC: 2
28,21: RNCC: 5 | RNVC: 2
28,44: RNCC: 5 | RNVC: 2
28: RNCC: 5 | RNVC: 2

14 Feb 1989

5110-15-063-1089
Handle File Wood

150631089
2625-80: RNCC: 3 | RNVC: 2

18 Jun 1981

5110-21-102-5879

5110-99-609-1385

5110-22-274-2949

5110-99-083-4224
Hand Bench Shears

990834224
NO PRIMARY REF 99-083-4224: RNCC: 3 | RNVC: 2
547-464: RNCC: 5 | RNVC: 2

10 Oct 1997

5110-15-208-8712
Lima Combinata Piat

152088712
2656: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-14-301-7514

5110-12-385-2660
Oval Cutting Punch

123852660
50.000.149: RNCC: 3 | RNVC: 2

16 May 2011

5110-99-427-8812

5110-12-386-2797
Hand Belt Cutter

123862797
50.000.103: RNCC: 3 | RNVC: 2

22 Aug 2011

5110-21-907-5795
Drop Knife Paper Trimmer

219075795
TRIM130: RNCC: 3 | RNVC: 2

20 Nov 1990

5110-15-206-7552
Pinza Per Cartellin

152067552
PINZADIAM65MM: RNCC: 3 | RNVC: 2
(241)A3488PINZADIAM65MM: RNCC: 5 | RNVC: 2

10 Jul 2012

5110-15-236-7345
Pinza Spellafili

152367345
113-46: RNCC: 3 | RNVC: 2
511015E091225: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-22-605-0006
Circle Cutter

226050006
9003: RNCC: 3 | RNVC: 2

6 Oct 2003

5110-15-184-8257
Tagliadischi

151848257
NSN511015R577845: RNCC: 3 | RNVC: 2

30 Dec 2008

5110-15-236-6635
Raschietto

152366635
07143451: RNCC: 3 | RNVC: 2
511015E087393: RNCC: 5 | RNVC: 9

27 Aug 2007

5110-15-165-4176
Coltello Titan - La

151654176
2321949: RNCC: 3 | RNVC: 2

1 Nov 2002

5110-15-208-4983
Scalpello

152084983
3SANELPTZ130X11: RNCC: 5 | RNVC: 3

16 Nov 2005

5110-15-208-4743
Alesatore

152084743
3AARFCFRDP19: RNCC: 3 | RNVC: 2

16 Nov 2005

5110-21-105-2051
Single Bow Cutting Punch

211052051
21-105-2051: RNCC: 3 | RNVC: 2
21-105-2051: RNCC: 5 | RNVC: 2

3 Jun 1968

5110-27-010-6689
Hand File

270106689
99999-NIIN-DA0014057: RNCC: 2 | RNVC: 1

18 Jun 2002

5110-66-013-7608
Hand Reamer

660137608
HAND REAMER: RNCC: 3 | RNVC: 1
650 5080: RNCC: 3 | RNVC: 2

1 Jan 1968

5110-21-806-4013

5110-99-796-4546
Hand Metal Cutting Shears

997964546
G56: RNCC: 3 | RNVC: 2

23 Feb 1988

5110-99-775-7552
Test Ring

997757552
MC1278063: RNCC: 3 | RNVC: 2

17 May 2002

5110-25-103-3368

5110-25-133-0191
Firmer Chisel

5110-22-301-3135

5110-25-102-6350
Hand File

5110-14-042-1689
Cable Coaxial Pince

140421689
16245548: RNCC: 3 | RNVC: 2
16245548: RNCC: 5 | RNVC: 2
16245548: RNCC: 5 | RNVC: 9

14 Feb 1977

5110-21-866-8547

5110-21-866-8565

5110-66-150-3832
Bow Saw

661503832
NO PRIMARY REF 66-150-3832: RNCC: 3 | RNVC: 2
07249107: RNCC: 5 | RNVC: 2

15 Apr 2003

5110-13-120-7208
Bow Saw

131207208
10.30.51: RNCC: 3 | RNVC: 2
02.13.61.21: RNCC: 5 | RNVC: 2

4 Dec 2009

5110-15-139-8899
Serie Lime

151398899
HB100: RNCC: 3 | RNVC: 2

10 Oct 1996

5110-25-128-9897
Knockout Punch And Die Set

251289897
600: RNCC: 3 | RNVC: 2
L0C0600: RNCC: 6 | RNVC: 9

1 Jan 1984

Load More Results